You are not logged in.
- Topics: Active | Unanswered
#1 2022-05-27 09:47:21
- positronik
- Member
- Registered: 2016-02-08
- Posts: 94
[SOLVED] RAID 1 not booting with kernel 5.18
Hi,
Since linux 5.18 my system does not boot anymore.
What happens is that the bootloader cannot find the device with the UUID specified and drops me in an emergency shell.
With linux-lts and linux 5.17 the system boots fine.
I set up a RAID 1 with two HDD following the wiki page https://wiki.archlinux.org/title/RAID
When I am in the emergency shell I can see that /dev/md* are not created, therefore it makes me think something changed with the way md modules are loaded.
Last edited by positronik (2022-05-31 07:56:33)
Offline
#2 2022-05-27 15:53:32
- twelveeighty
- Member
- From: Alberta, Canada
- Registered: 2011-09-04
- Posts: 1,096
Re: [SOLVED] RAID 1 not booting with kernel 5.18
linux in [core] is 5.17.9 at the date/time of your post? Are you using [testing] repo? If that's the case, you should probably post in the Testing forum.
Offline
#3 2022-05-27 16:40:08
- positronik
- Member
- Registered: 2016-02-08
- Posts: 94
Re: [SOLVED] RAID 1 not booting with kernel 5.18
You're right, I'll ask the mod to move this to testing.
Offline
#4 2022-05-27 16:41:54
- WorMzy
- Forum Moderator
- From: Scotland
- Registered: 2010-06-16
- Posts: 11,846
- Website
Re: [SOLVED] RAID 1 not booting with kernel 5.18
Mod note: Moving to Testing.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
#5 2022-05-28 20:52:34
- cnose
- Member
- Registered: 2020-08-15
- Posts: 3
Re: [SOLVED] RAID 1 not booting with kernel 5.18
Hi, do you have any more info about this? I had a similar thing occur after upgrading to 5.18-zen; I could boot but my RAID1 drives were not detected and not mounted. Downgrading to 5.17.9-zen brought back my array.
Offline
#6 2022-05-28 22:33:14
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,324
Re: [SOLVED] RAID 1 not booting with kernel 5.18
Please post the system journal for a boot with the issue and a boot without.
Offline
#7 2022-05-28 23:30:21
- cnose
- Member
- Registered: 2020-08-15
- Posts: 3
Re: [SOLVED] RAID 1 not booting with kernel 5.18
Booting with linux-zen-5.18
May 28 16:06:13 gibson kernel: Linux version 5.18.0-zen1-1-zen (linux-zen@archlinux) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 ZEN SMP PREEMPT_DYNAMIC Tue, 24 May 2022 22:00:49 +0000
May 28 16:06:13 gibson kernel: Command line: initrd=\amd-ucode.img initrd=\initramfs-linux-zen.img root=PARTUUID="40f60eaa-ca30-8b47-95f9-00bd322c3817" rw quiet splash
May 28 16:06:13 gibson kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
May 28 16:06:13 gibson kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
May 28 16:06:13 gibson kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
May 28 16:06:13 gibson kernel: x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
May 28 16:06:13 gibson kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
May 28 16:06:13 gibson kernel: signal: max sigframe size: 1776
May 28 16:06:13 gibson kernel: BIOS-provided physical RAM map:
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x000000000a20c000-0x000000000affffff] usable
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x000000000b020000-0x00000000dbd57fff] usable
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x00000000dbd58000-0x00000000dbea1fff] reserved
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x00000000dbea2000-0x00000000dc022fff] usable
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x00000000dc023000-0x00000000dc434fff] ACPI NVS
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x00000000dc435000-0x00000000dd05cfff] reserved
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x00000000dd05d000-0x00000000deffffff] usable
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
May 28 16:06:13 gibson kernel: BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
May 28 16:06:13 gibson kernel: NX (Execute Disable) protection: active
May 28 16:06:13 gibson kernel: e820: update [mem 0xd82cc018-0xd82da057] usable ==> usable
May 28 16:06:13 gibson kernel: e820: update [mem 0xd82cc018-0xd82da057] usable ==> usable
May 28 16:06:13 gibson kernel: e820: update [mem 0xd820d018-0xd822d057] usable ==> usable
May 28 16:06:13 gibson kernel: e820: update [mem 0xd820d018-0xd822d057] usable ==> usable
May 28 16:06:13 gibson kernel: extended physical RAM map:
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x0000000000100000-0x0000000009d7ffff] usable
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x000000000a20c000-0x000000000affffff] usable
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x000000000b020000-0x00000000d820d017] usable
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000d820d018-0x00000000d822d057] usable
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000d822d058-0x00000000d82cc017] usable
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000d82cc018-0x00000000d82da057] usable
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000d82da058-0x00000000dbd57fff] usable
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000dbd58000-0x00000000dbea1fff] reserved
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000dbea2000-0x00000000dc022fff] usable
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000dc023000-0x00000000dc434fff] ACPI NVS
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000dc435000-0x00000000dd05cfff] reserved
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000dd05d000-0x00000000deffffff] usable
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
May 28 16:06:13 gibson kernel: reserve setup_data: [mem 0x0000000100000000-0x000000041f37ffff] usable
May 28 16:06:13 gibson kernel: efi: EFI v2.70 by American Megatrends
May 28 16:06:13 gibson kernel: efi: ACPI 2.0=0xdc3b2000 ACPI=0xdc3b2000 SMBIOS=0xdcea8000 MEMATTR=0xd82dc298 ESRT=0xd8442f98 RNG=0xdcec2d98
May 28 16:06:13 gibson kernel: efi: seeding entropy pool
May 28 16:06:13 gibson kernel: random: crng init done
May 28 16:06:13 gibson kernel: SMBIOS 2.8 present.
May 28 16:06:13 gibson kernel: DMI: Micro-Star International Co., Ltd. MS-7A40/B450I GAMING PLUS AC (MS-7A40), BIOS A.B0 11/12/2019
May 28 16:06:13 gibson kernel: tsc: Fast TSC calibration failed
May 28 16:06:13 gibson kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
May 28 16:06:13 gibson kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
May 28 16:06:13 gibson kernel: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
May 28 16:06:13 gibson kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
May 28 16:06:13 gibson kernel: total RAM covered: 3583M
May 28 16:06:13 gibson kernel: Found optimal setting for mtrr clean up
May 28 16:06:13 gibson kernel: gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
May 28 16:06:13 gibson kernel: e820: update [mem 0xdc7d0000-0xdc7dffff] usable ==> reserved
May 28 16:06:13 gibson kernel: e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
May 28 16:06:13 gibson kernel: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
May 28 16:06:13 gibson kernel: esrt: Reserving ESRT space from 0x00000000d8442f98 to 0x00000000d8442fd0.
May 28 16:06:13 gibson kernel: e820: update [mem 0xd8442000-0xd8442fff] usable ==> reserved
May 28 16:06:13 gibson kernel: Using GB pages for direct mapping
May 28 16:06:13 gibson kernel: Secure boot disabled
May 28 16:06:13 gibson kernel: RAMDISK: [mem 0x7f75c000-0x7fff2fff]
May 28 16:06:13 gibson kernel: ACPI: Early table checksum verification disabled
May 28 16:06:13 gibson kernel: ACPI: RSDP 0x00000000DC3B2000 000024 (v02 ALASKA)
May 28 16:06:13 gibson kernel: ACPI: XSDT 0x00000000DC3B20A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
May 28 16:06:13 gibson kernel: ACPI: FACP 0x00000000DC3B9A68 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
May 28 16:06:13 gibson kernel: ACPI: DSDT 0x00000000DC3B21F0 007876 (v02 ALASKA A M I 01072009 INTL 20120913)
May 28 16:06:13 gibson kernel: ACPI: FACS 0x00000000DC41EE00 000040
May 28 16:06:13 gibson kernel: ACPI: APIC 0x00000000DC3B9B80 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
May 28 16:06:13 gibson kernel: ACPI: FPDT 0x00000000DC3B9CE0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
May 28 16:06:13 gibson kernel: ACPI: FIDT 0x00000000DC3B9D28 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
May 28 16:06:13 gibson kernel: ACPI: SSDT 0x00000000DC3B9DC8 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
May 28 16:06:13 gibson kernel: ACPI: SSDT 0x00000000DC3B9E90 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
May 28 16:06:13 gibson kernel: ACPI: SSDT 0x00000000DC3C2B28 00366B (v01 AMD AMD AOD 00000001 INTL 20120913)
May 28 16:06:13 gibson kernel: ACPI: MCFG 0x00000000DC3C6198 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
May 28 16:06:13 gibson kernel: ACPI: HPET 0x00000000DC3C61D8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
May 28 16:06:13 gibson kernel: ACPI: UEFI 0x00000000DC3C6210 000042 (v01 ALASKA A M I 00000002 01000013)
May 28 16:06:13 gibson kernel: ACPI: IVRS 0x00000000DC3C6258 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
May 28 16:06:13 gibson kernel: ACPI: PCCT 0x00000000DC3C6328 00006E (v01 AMD AMD PCCT 00000001 AMD 00000000)
May 28 16:06:13 gibson kernel: ACPI: SSDT 0x00000000DC3C6398 002F29 (v01 AMD AMD CPU 00000001 AMD 00000001)
May 28 16:06:13 gibson kernel: ACPI: CRAT 0x00000000DC3C92C8 000B58 (v01 AMD AMD CRAT 00000001 AMD 00000001)
May 28 16:06:13 gibson kernel: ACPI: CDIT 0x00000000DC3C9E20 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
May 28 16:06:13 gibson kernel: ACPI: BGRT 0x00000000DC3C9E50 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
May 28 16:06:13 gibson kernel: ACPI: SSDT 0x00000000DC3C9E88 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
May 28 16:06:13 gibson kernel: ACPI: SSDT 0x00000000DC3CBBD8 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
May 28 16:06:13 gibson kernel: ACPI: WSMT 0x00000000DC3CBC98 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
May 28 16:06:13 gibson kernel: ACPI: Reserving FACP table memory at [mem 0xdc3b9a68-0xdc3b9b7b]
May 28 16:06:13 gibson kernel: ACPI: Reserving DSDT table memory at [mem 0xdc3b21f0-0xdc3b9a65]
May 28 16:06:13 gibson kernel: ACPI: Reserving FACS table memory at [mem 0xdc41ee00-0xdc41ee3f]
May 28 16:06:13 gibson kernel: ACPI: Reserving APIC table memory at [mem 0xdc3b9b80-0xdc3b9cdd]
May 28 16:06:13 gibson kernel: ACPI: Reserving FPDT table memory at [mem 0xdc3b9ce0-0xdc3b9d23]
May 28 16:06:13 gibson kernel: ACPI: Reserving FIDT table memory at [mem 0xdc3b9d28-0xdc3b9dc3]
May 28 16:06:13 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3b9dc8-0xdc3b9e8f]
May 28 16:06:13 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3b9e90-0xdc3c2b27]
May 28 16:06:13 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3c2b28-0xdc3c6192]
May 28 16:06:13 gibson kernel: ACPI: Reserving MCFG table memory at [mem 0xdc3c6198-0xdc3c61d3]
May 28 16:06:13 gibson kernel: ACPI: Reserving HPET table memory at [mem 0xdc3c61d8-0xdc3c620f]
May 28 16:06:13 gibson kernel: ACPI: Reserving UEFI table memory at [mem 0xdc3c6210-0xdc3c6251]
May 28 16:06:13 gibson kernel: ACPI: Reserving IVRS table memory at [mem 0xdc3c6258-0xdc3c6327]
May 28 16:06:13 gibson kernel: ACPI: Reserving PCCT table memory at [mem 0xdc3c6328-0xdc3c6395]
May 28 16:06:13 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3c6398-0xdc3c92c0]
May 28 16:06:13 gibson kernel: ACPI: Reserving CRAT table memory at [mem 0xdc3c92c8-0xdc3c9e1f]
May 28 16:06:13 gibson kernel: ACPI: Reserving CDIT table memory at [mem 0xdc3c9e20-0xdc3c9e48]
May 28 16:06:13 gibson kernel: ACPI: Reserving BGRT table memory at [mem 0xdc3c9e50-0xdc3c9e87]
May 28 16:06:13 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3c9e88-0xdc3cbbd1]
May 28 16:06:13 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3cbbd8-0xdc3cbc96]
May 28 16:06:13 gibson kernel: ACPI: Reserving WSMT table memory at [mem 0xdc3cbc98-0xdc3cbcbf]
May 28 16:06:13 gibson kernel: No NUMA configuration found
May 28 16:06:13 gibson kernel: Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
May 28 16:06:13 gibson kernel: NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
May 28 16:06:13 gibson kernel: Zone ranges:
May 28 16:06:13 gibson kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff]
May 28 16:06:13 gibson kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
May 28 16:06:13 gibson kernel: Normal [mem 0x0000000100000000-0x000000041f37ffff]
May 28 16:06:13 gibson kernel: Device empty
May 28 16:06:13 gibson kernel: Movable zone start for each node
May 28 16:06:13 gibson kernel: Early memory node ranges
May 28 16:06:13 gibson kernel: node 0: [mem 0x0000000000001000-0x000000000009ffff]
May 28 16:06:13 gibson kernel: node 0: [mem 0x0000000000100000-0x0000000009d7ffff]
May 28 16:06:13 gibson kernel: node 0: [mem 0x000000000a000000-0x000000000a1fffff]
May 28 16:06:13 gibson kernel: node 0: [mem 0x000000000a20c000-0x000000000affffff]
May 28 16:06:13 gibson kernel: node 0: [mem 0x000000000b020000-0x00000000dbd57fff]
May 28 16:06:13 gibson kernel: node 0: [mem 0x00000000dbea2000-0x00000000dc022fff]
May 28 16:06:13 gibson kernel: node 0: [mem 0x00000000dd05d000-0x00000000deffffff]
May 28 16:06:13 gibson kernel: node 0: [mem 0x0000000100000000-0x000000041f37ffff]
May 28 16:06:13 gibson kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
May 28 16:06:13 gibson kernel: On node 0, zone DMA: 1 pages in unavailable ranges
May 28 16:06:13 gibson kernel: On node 0, zone DMA: 96 pages in unavailable ranges
May 28 16:06:13 gibson kernel: On node 0, zone DMA32: 640 pages in unavailable ranges
May 28 16:06:13 gibson kernel: On node 0, zone DMA32: 12 pages in unavailable ranges
May 28 16:06:13 gibson kernel: On node 0, zone DMA32: 32 pages in unavailable ranges
May 28 16:06:13 gibson kernel: On node 0, zone DMA32: 330 pages in unavailable ranges
May 28 16:06:13 gibson kernel: On node 0, zone DMA32: 4154 pages in unavailable ranges
May 28 16:06:13 gibson kernel: On node 0, zone Normal: 4096 pages in unavailable ranges
May 28 16:06:13 gibson kernel: On node 0, zone Normal: 3200 pages in unavailable ranges
May 28 16:06:13 gibson kernel: ACPI: PM-Timer IO Port: 0x808
May 28 16:06:13 gibson kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
May 28 16:06:13 gibson kernel: IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
May 28 16:06:13 gibson kernel: IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
May 28 16:06:13 gibson kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
May 28 16:06:13 gibson kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
May 28 16:06:13 gibson kernel: ACPI: Using ACPI (MADT) for SMP configuration information
May 28 16:06:13 gibson kernel: ACPI: HPET id: 0x10228201 base: 0xfed00000
May 28 16:06:13 gibson kernel: e820: update [mem 0xd8177000-0xd81d3fff] usable ==> reserved
May 28 16:06:13 gibson kernel: smpboot: Allowing 32 CPUs, 20 hotplug CPUs
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd8177000-0xd81d3fff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd820d000-0xd820dfff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd822d000-0xd822dfff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd82cc000-0xd82ccfff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd82da000-0xd82dafff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd8442000-0xd8442fff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xdbd58000-0xdbea1fff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xdc023000-0xdc434fff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xdc435000-0xdd05cfff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
May 28 16:06:13 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
May 28 16:06:13 gibson kernel: [mem 0xe0000000-0xf7ffffff] available for PCI devices
May 28 16:06:13 gibson kernel: Booting paravirtualized kernel on bare hardware
May 28 16:06:13 gibson kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
May 28 16:06:13 gibson kernel: setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1
May 28 16:06:13 gibson kernel: percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
May 28 16:06:13 gibson kernel: pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
May 28 16:06:13 gibson kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
May 28 16:06:13 gibson kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
May 28 16:06:13 gibson kernel: Fallback order for Node 0: 0
May 28 16:06:13 gibson kernel: Built 1 zonelists, mobility grouping on. Total pages: 4116242
May 28 16:06:13 gibson kernel: Policy zone: Normal
May 28 16:06:13 gibson kernel: Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux-zen.img root=PARTUUID="40f60eaa-ca30-8b47-95f9-00bd322c3817" rw quiet splash
May 28 16:06:13 gibson kernel: Unknown kernel command line parameters "splash", will be passed to user space.
May 28 16:06:13 gibson kernel: printk: log_buf_len individual max cpu contribution: 4096 bytes
May 28 16:06:13 gibson kernel: printk: log_buf_len total cpu_extra contributions: 126976 bytes
May 28 16:06:13 gibson kernel: printk: log_buf_len min size: 131072 bytes
May 28 16:06:13 gibson kernel: printk: log_buf_len: 262144 bytes
May 28 16:06:13 gibson kernel: printk: early log buf free: 116840(89%)
May 28 16:06:13 gibson kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
May 28 16:06:13 gibson kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
May 28 16:06:13 gibson kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
May 28 16:06:13 gibson kernel: Memory: 16216460K/16726972K available (16391K kernel code, 2124K rwdata, 10924K rodata, 1872K init, 3196K bss, 510252K reserved, 0K cma-reserved)
May 28 16:06:13 gibson kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
May 28 16:06:13 gibson kernel: ftrace: allocating 42799 entries in 168 pages
May 28 16:06:13 gibson kernel: ftrace: allocated 168 pages with 3 groups
May 28 16:06:13 gibson kernel: Dynamic Preempt: full
May 28 16:06:13 gibson kernel: rcu: Preemptible hierarchical RCU implementation.
May 28 16:06:13 gibson kernel: rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
May 28 16:06:13 gibson kernel: rcu: RCU priority boosting: priority 1 delay 500 ms.
May 28 16:06:13 gibson kernel: Trampoline variant of Tasks RCU enabled.
May 28 16:06:13 gibson kernel: Rude variant of Tasks RCU enabled.
May 28 16:06:13 gibson kernel: Tracing variant of Tasks RCU enabled.
May 28 16:06:13 gibson kernel: rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
May 28 16:06:13 gibson kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
May 28 16:06:13 gibson kernel: NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
May 28 16:06:13 gibson kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
May 28 16:06:13 gibson kernel: Console: colour dummy device 80x25
May 28 16:06:13 gibson kernel: printk: console [tty0] enabled
May 28 16:06:13 gibson kernel: ACPI: Core revision 20211217
May 28 16:06:13 gibson kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
May 28 16:06:13 gibson kernel: APIC: Switch to symmetric I/O mode setup
May 28 16:06:13 gibson kernel: Switched APIC routing to physical flat.
May 28 16:06:13 gibson kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
May 28 16:06:13 gibson kernel: tsc: PIT calibration matches HPET. 1 loops
May 28 16:06:13 gibson kernel: tsc: Detected 3600.138 MHz processor
May 28 16:06:13 gibson kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e4d5d04b4, max_idle_ns: 440795295957 ns
May 28 16:06:13 gibson kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.27 BogoMIPS (lpj=3600138)
May 28 16:06:13 gibson kernel: pid_max: default: 32768 minimum: 301
May 28 16:06:13 gibson kernel: LSM: Security Framework initializing
May 28 16:06:13 gibson kernel: landlock: Up and running.
May 28 16:06:13 gibson kernel: Yama: becoming mindful.
May 28 16:06:13 gibson kernel: LSM support for eBPF active
May 28 16:06:13 gibson kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
May 28 16:06:13 gibson kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
May 28 16:06:13 gibson kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated
May 28 16:06:13 gibson kernel: LVT offset 1 assigned for vector 0xf9
May 28 16:06:13 gibson kernel: LVT offset 2 assigned for vector 0xf4
May 28 16:06:13 gibson kernel: Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
May 28 16:06:13 gibson kernel: Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
May 28 16:06:13 gibson kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
May 28 16:06:13 gibson kernel: Spectre V2 : Mitigation: Retpolines
May 28 16:06:13 gibson kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
May 28 16:06:13 gibson kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
May 28 16:06:13 gibson kernel: Spectre V2 : User space: Mitigation: STIBP via prctl
May 28 16:06:13 gibson kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
May 28 16:06:13 gibson kernel: Freeing SMP alternatives memory: 44K
May 28 16:06:13 gibson kernel: smpboot: CPU0: AMD Ryzen 5 3600 6-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
May 28 16:06:13 gibson kernel: cblist_init_generic: Setting adjustable number of callback queues.
May 28 16:06:13 gibson kernel: cblist_init_generic: Setting shift to 5 and lim to 1.
May 28 16:06:13 gibson kernel: cblist_init_generic: Setting shift to 5 and lim to 1.
May 28 16:06:13 gibson kernel: cblist_init_generic: Setting shift to 5 and lim to 1.
May 28 16:06:13 gibson kernel: Performance Events: Fam17h+ core perfctr, AMD PMU driver.
May 28 16:06:13 gibson kernel: ... version: 0
May 28 16:06:13 gibson kernel: ... bit width: 48
May 28 16:06:13 gibson kernel: ... generic registers: 6
May 28 16:06:13 gibson kernel: ... value mask: 0000ffffffffffff
May 28 16:06:13 gibson kernel: ... max period: 00007fffffffffff
May 28 16:06:13 gibson kernel: ... fixed-purpose events: 0
May 28 16:06:13 gibson kernel: ... event mask: 000000000000003f
May 28 16:06:13 gibson kernel: rcu: Hierarchical SRCU implementation.
May 28 16:06:13 gibson kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
May 28 16:06:13 gibson kernel: smp: Bringing up secondary CPUs ...
May 28 16:06:13 gibson kernel: x86: Booting SMP configuration:
May 28 16:06:13 gibson kernel: .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
May 28 16:06:13 gibson kernel: smp: Brought up 1 node, 12 CPUs
May 28 16:06:13 gibson kernel: smpboot: Max logical packages: 3
May 28 16:06:13 gibson kernel: smpboot: Total of 12 processors activated (86403.31 BogoMIPS)
May 28 16:06:13 gibson kernel: devtmpfs: initialized
May 28 16:06:13 gibson kernel: x86/mm: Memory block size: 128MB
May 28 16:06:13 gibson kernel: ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
May 28 16:06:13 gibson kernel: ACPI: PM: Registering ACPI NVS region [mem 0xdc023000-0xdc434fff] (4268032 bytes)
May 28 16:06:13 gibson kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
May 28 16:06:13 gibson kernel: futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
May 28 16:06:13 gibson kernel: pinctrl core: initialized pinctrl subsystem
May 28 16:06:13 gibson kernel: PM: RTC time: 23:06:10, date: 2022-05-28
May 28 16:06:13 gibson kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
May 28 16:06:13 gibson kernel: DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
May 28 16:06:13 gibson kernel: DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
May 28 16:06:13 gibson kernel: DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
May 28 16:06:13 gibson kernel: audit: initializing netlink subsys (disabled)
May 28 16:06:13 gibson kernel: audit: type=2000 audit(1653779170.134:1): state=initialized audit_enabled=0 res=1
May 28 16:06:13 gibson kernel: thermal_sys: Registered thermal governor 'fair_share'
May 28 16:06:13 gibson kernel: thermal_sys: Registered thermal governor 'bang_bang'
May 28 16:06:13 gibson kernel: thermal_sys: Registered thermal governor 'step_wise'
May 28 16:06:13 gibson kernel: thermal_sys: Registered thermal governor 'user_space'
May 28 16:06:13 gibson kernel: thermal_sys: Registered thermal governor 'power_allocator'
May 28 16:06:13 gibson kernel: cpuidle: using governor ladder
May 28 16:06:13 gibson kernel: cpuidle: using governor menu
May 28 16:06:13 gibson kernel: Detected 1 PCC Subspaces
May 28 16:06:13 gibson kernel: Registering PCC driver as Mailbox controller
May 28 16:06:13 gibson kernel: HugeTLB: can free 4095 vmemmap pages for hugepages-1048576kB
May 28 16:06:13 gibson kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
May 28 16:06:13 gibson kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
May 28 16:06:13 gibson kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
May 28 16:06:13 gibson kernel: PCI: Using configuration type 1 for base access
May 28 16:06:13 gibson kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
May 28 16:06:13 gibson kernel: HugeTLB: can free 7 vmemmap pages for hugepages-2048kB
May 28 16:06:13 gibson kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
May 28 16:06:13 gibson kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
May 28 16:06:13 gibson kernel: ACPI: Added _OSI(Module Device)
May 28 16:06:13 gibson kernel: ACPI: Added _OSI(Processor Device)
May 28 16:06:13 gibson kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
May 28 16:06:13 gibson kernel: ACPI: Added _OSI(Processor Aggregator Device)
May 28 16:06:13 gibson kernel: ACPI: Added _OSI(Linux-Dell-Video)
May 28 16:06:13 gibson kernel: ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
May 28 16:06:13 gibson kernel: ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
May 28 16:06:13 gibson kernel: ACPI: 7 ACPI AML tables successfully acquired and loaded
May 28 16:06:13 gibson kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
May 28 16:06:13 gibson kernel: ACPI: Interpreter enabled
May 28 16:06:13 gibson kernel: ACPI: PM: (supports S0 S3 S4 S5)
May 28 16:06:13 gibson kernel: ACPI: Using IOAPIC for interrupt routing
May 28 16:06:13 gibson kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
May 28 16:06:13 gibson kernel: ACPI: Enabled 2 GPEs in block 00 to 1F
May 28 16:06:13 gibson kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
May 28 16:06:13 gibson kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
May 28 16:06:13 gibson kernel: acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR DPC]
May 28 16:06:13 gibson kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
May 28 16:06:13 gibson kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
May 28 16:06:13 gibson kernel: PCI host bridge to bus 0000:00
May 28 16:06:13 gibson kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
May 28 16:06:13 gibson kernel: pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
May 28 16:06:13 gibson kernel: pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:01.3: [1022:1483] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:00:01.3: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:00:07.1: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:00:08.1: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:00:08.2: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:00:08.3: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
May 28 16:06:13 gibson kernel: pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
May 28 16:06:13 gibson kernel: pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
May 28 16:06:13 gibson kernel: pci 0000:03:00.0: [1022:43d5] type 00 class 0x0c0330
May 28 16:06:13 gibson kernel: pci 0000:03:00.0: reg 0x10: [mem 0xf76a0000-0xf76a7fff 64bit]
May 28 16:06:13 gibson kernel: pci 0000:03:00.0: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:03:00.0: PME# supported from D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
May 28 16:06:13 gibson kernel: pci 0000:03:00.1: reg 0x24: [mem 0xf7680000-0xf769ffff]
May 28 16:06:13 gibson kernel: pci 0000:03:00.1: reg 0x30: [mem 0xf7600000-0xf767ffff pref]
May 28 16:06:13 gibson kernel: pci 0000:03:00.1: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:03:00.1: PME# supported from D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:03:00.2: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:03:00.2: PME# supported from D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:00:01.3: PCI bridge to [bus 03-28]
May 28 16:06:13 gibson kernel: pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
May 28 16:06:13 gibson kernel: pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf76fffff]
May 28 16:06:13 gibson kernel: pci 0000:20:00.0: [1022:43c7] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:20:00.0: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:20:00.0: PME# supported from D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:20:01.0: [1022:43c7] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:20:01.0: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:20:01.0: PME# supported from D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:20:04.0: [1022:43c7] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:20:04.0: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:20:04.0: PME# supported from D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:20:06.0: [1022:43c7] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:20:06.0: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:20:06.0: PME# supported from D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:20:07.0: [1022:43c7] type 01 class 0x060400
May 28 16:06:13 gibson kernel: pci 0000:20:07.0: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:20:07.0: PME# supported from D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:03:00.2: PCI bridge to [bus 20-28]
May 28 16:06:13 gibson kernel: pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
May 28 16:06:13 gibson kernel: pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf75fffff]
May 28 16:06:13 gibson kernel: pci 0000:20:00.0: PCI bridge to [bus 21]
May 28 16:06:13 gibson kernel: pci 0000:20:01.0: PCI bridge to [bus 22]
May 28 16:06:13 gibson kernel: pci 0000:25:00.0: [10ec:8168] type 00 class 0x020000
May 28 16:06:13 gibson kernel: pci 0000:25:00.0: reg 0x10: [io 0xf000-0xf0ff]
May 28 16:06:13 gibson kernel: pci 0000:25:00.0: reg 0x18: [mem 0xf7504000-0xf7504fff 64bit]
May 28 16:06:13 gibson kernel: pci 0000:25:00.0: reg 0x20: [mem 0xf7500000-0xf7503fff 64bit]
May 28 16:06:13 gibson kernel: pci 0000:25:00.0: supports D1 D2
May 28 16:06:13 gibson kernel: pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:20:04.0: PCI bridge to [bus 25]
May 28 16:06:13 gibson kernel: pci 0000:20:04.0: bridge window [io 0xf000-0xffff]
May 28 16:06:13 gibson kernel: pci 0000:20:04.0: bridge window [mem 0xf7500000-0xf75fffff]
May 28 16:06:13 gibson kernel: pci 0000:20:06.0: PCI bridge to [bus 27]
May 28 16:06:13 gibson kernel: pci 0000:20:07.0: PCI bridge to [bus 28]
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: [10de:1c03] type 00 class 0x030000
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: reg 0x24: [io 0xe000-0xe07f]
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: BAR 3: assigned to efifb
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
May 28 16:06:13 gibson kernel: pci 0000:29:00.1: [10de:10f1] type 00 class 0x040300
May 28 16:06:13 gibson kernel: pci 0000:29:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: ASPM: current common clock configuration is inconsistent, reconfiguring
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: PCI bridge to [bus 29]
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
May 28 16:06:13 gibson kernel: pci 0000:2a:00.0: [1022:148a] type 00 class 0x130000
May 28 16:06:13 gibson kernel: pci 0000:2a:00.0: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:00:07.1: PCI bridge to [bus 2a]
May 28 16:06:13 gibson kernel: pci 0000:2b:00.0: [1022:1485] type 00 class 0x130000
May 28 16:06:13 gibson kernel: pci 0000:2b:00.0: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:2b:00.1: [1022:1486] type 00 class 0x108000
May 28 16:06:13 gibson kernel: pci 0000:2b:00.1: reg 0x18: [mem 0xf7300000-0xf73fffff]
May 28 16:06:13 gibson kernel: pci 0000:2b:00.1: reg 0x24: [mem 0xf7408000-0xf7409fff]
May 28 16:06:13 gibson kernel: pci 0000:2b:00.1: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:2b:00.3: [1022:149c] type 00 class 0x0c0330
May 28 16:06:13 gibson kernel: pci 0000:2b:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
May 28 16:06:13 gibson kernel: pci 0000:2b:00.3: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:2b:00.3: PME# supported from D0 D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:2b:00.4: [1022:1487] type 00 class 0x040300
May 28 16:06:13 gibson kernel: pci 0000:2b:00.4: reg 0x10: [mem 0xf7400000-0xf7407fff]
May 28 16:06:13 gibson kernel: pci 0000:2b:00.4: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:2b:00.4: PME# supported from D0 D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:00:08.1: PCI bridge to [bus 2b]
May 28 16:06:13 gibson kernel: pci 0000:00:08.1: bridge window [mem 0xf7200000-0xf74fffff]
May 28 16:06:13 gibson kernel: pci 0000:30:00.0: [1022:7901] type 00 class 0x010601
May 28 16:06:13 gibson kernel: pci 0000:30:00.0: reg 0x24: [mem 0xf7800000-0xf78007ff]
May 28 16:06:13 gibson kernel: pci 0000:30:00.0: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:30:00.0: PME# supported from D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:00:08.2: PCI bridge to [bus 30]
May 28 16:06:13 gibson kernel: pci 0000:00:08.2: bridge window [mem 0xf7800000-0xf78fffff]
May 28 16:06:13 gibson kernel: pci 0000:31:00.0: [1022:7901] type 00 class 0x010601
May 28 16:06:13 gibson kernel: pci 0000:31:00.0: reg 0x24: [mem 0xf7700000-0xf77007ff]
May 28 16:06:13 gibson kernel: pci 0000:31:00.0: enabling Extended Tags
May 28 16:06:13 gibson kernel: pci 0000:31:00.0: PME# supported from D3hot D3cold
May 28 16:06:13 gibson kernel: pci 0000:00:08.3: PCI bridge to [bus 31]
May 28 16:06:13 gibson kernel: pci 0000:00:08.3: bridge window [mem 0xf7700000-0xf77fffff]
May 28 16:06:13 gibson kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 0
May 28 16:06:13 gibson kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 0
May 28 16:06:13 gibson kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 0
May 28 16:06:13 gibson kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 0
May 28 16:06:13 gibson kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 0
May 28 16:06:13 gibson kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 0
May 28 16:06:13 gibson kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 0
May 28 16:06:13 gibson kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 0
May 28 16:06:13 gibson kernel: iommu: Default domain type: Translated
May 28 16:06:13 gibson kernel: iommu: DMA domain TLB invalidation policy: lazy mode
May 28 16:06:13 gibson kernel: SCSI subsystem initialized
May 28 16:06:13 gibson kernel: libata version 3.00 loaded.
May 28 16:06:13 gibson kernel: ACPI: bus type USB registered
May 28 16:06:13 gibson kernel: usbcore: registered new interface driver usbfs
May 28 16:06:13 gibson kernel: usbcore: registered new interface driver hub
May 28 16:06:13 gibson kernel: usbcore: registered new device driver usb
May 28 16:06:13 gibson kernel: pps_core: LinuxPPS API ver. 1 registered
May 28 16:06:13 gibson kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
May 28 16:06:13 gibson kernel: PTP clock support registered
May 28 16:06:13 gibson kernel: EDAC MC: Ver: 3.0.0
May 28 16:06:13 gibson kernel: Registered efivars operations
May 28 16:06:13 gibson kernel: NetLabel: Initializing
May 28 16:06:13 gibson kernel: NetLabel: domain hash size = 128
May 28 16:06:13 gibson kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
May 28 16:06:13 gibson kernel: NetLabel: unlabeled traffic allowed by default
May 28 16:06:13 gibson kernel: mctp: management component transport protocol core
May 28 16:06:13 gibson kernel: NET: Registered PF_MCTP protocol family
May 28 16:06:13 gibson kernel: PCI: Using ACPI for IRQ routing
May 28 16:06:13 gibson kernel: PCI: pci_cache_line_size set to 64 bytes
May 28 16:06:13 gibson kernel: Expanded resource Reserved due to conflict with PCI Bus 0000:00
May 28 16:06:13 gibson kernel: e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
May 28 16:06:13 gibson kernel: e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
May 28 16:06:13 gibson kernel: e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
May 28 16:06:13 gibson kernel: e820: reserve RAM buffer [mem 0xd8177000-0xdbffffff]
May 28 16:06:13 gibson kernel: e820: reserve RAM buffer [mem 0xd820d018-0xdbffffff]
May 28 16:06:13 gibson kernel: e820: reserve RAM buffer [mem 0xd82cc018-0xdbffffff]
May 28 16:06:13 gibson kernel: e820: reserve RAM buffer [mem 0xd8442000-0xdbffffff]
May 28 16:06:13 gibson kernel: e820: reserve RAM buffer [mem 0xdbd58000-0xdbffffff]
May 28 16:06:13 gibson kernel: e820: reserve RAM buffer [mem 0xdc023000-0xdfffffff]
May 28 16:06:13 gibson kernel: e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
May 28 16:06:13 gibson kernel: e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: vgaarb: setting as boot VGA device
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: vgaarb: bridge control possible
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
May 28 16:06:13 gibson kernel: vgaarb: loaded
May 28 16:06:13 gibson kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
May 28 16:06:13 gibson kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
May 28 16:06:13 gibson kernel: clocksource: Switched to clocksource tsc-early
May 28 16:06:13 gibson kernel: VFS: Disk quotas dquot_6.6.0
May 28 16:06:13 gibson kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
May 28 16:06:13 gibson kernel: pnp: PnP ACPI init
May 28 16:06:13 gibson kernel: system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
May 28 16:06:13 gibson kernel: system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved
May 28 16:06:13 gibson kernel: system 00:03: [io 0x0a00-0x0a0f] has been reserved
May 28 16:06:13 gibson kernel: system 00:03: [io 0x0a10-0x0a1f] has been reserved
May 28 16:06:13 gibson kernel: system 00:03: [io 0x0a20-0x0a2f] has been reserved
May 28 16:06:13 gibson kernel: system 00:03: [io 0x0a40-0x0a4f] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x04d0-0x04d1] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x040b] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x04d6] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0c00-0x0c01] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0c14] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0c50-0x0c51] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0c52] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0c6c] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0c6f] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0cd0-0x0cd1] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0cd2-0x0cd3] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0cd4-0x0cd5] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0cd6-0x0cd7] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0cd8-0x0cdf] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0800-0x089f] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0b00-0x0b0f] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0b20-0x0b3f] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0900-0x090f] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [io 0x0910-0x091f] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
May 28 16:06:13 gibson kernel: system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
May 28 16:06:13 gibson kernel: system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
May 28 16:06:13 gibson kernel: system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
May 28 16:06:13 gibson kernel: system 00:04: [mem 0xff000000-0xffffffff] has been reserved
May 28 16:06:13 gibson kernel: pnp: PnP ACPI: found 5 devices
May 28 16:06:13 gibson kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
May 28 16:06:13 gibson kernel: NET: Registered PF_INET protocol family
May 28 16:06:13 gibson kernel: IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
May 28 16:06:13 gibson kernel: tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
May 28 16:06:13 gibson kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
May 28 16:06:13 gibson kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
May 28 16:06:13 gibson kernel: TCP: Hash tables configured (established 131072 bind 65536)
May 28 16:06:13 gibson kernel: MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
May 28 16:06:13 gibson kernel: UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
May 28 16:06:13 gibson kernel: UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
May 28 16:06:13 gibson kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
May 28 16:06:13 gibson kernel: NET: Registered PF_XDP protocol family
May 28 16:06:13 gibson kernel: pci 0000:20:00.0: PCI bridge to [bus 21]
May 28 16:06:13 gibson kernel: pci 0000:20:01.0: PCI bridge to [bus 22]
May 28 16:06:13 gibson kernel: pci 0000:20:04.0: PCI bridge to [bus 25]
May 28 16:06:13 gibson kernel: pci 0000:20:04.0: bridge window [io 0xf000-0xffff]
May 28 16:06:13 gibson kernel: pci 0000:20:04.0: bridge window [mem 0xf7500000-0xf75fffff]
May 28 16:06:13 gibson kernel: pci 0000:20:06.0: PCI bridge to [bus 27]
May 28 16:06:13 gibson kernel: pci 0000:20:07.0: PCI bridge to [bus 28]
May 28 16:06:13 gibson kernel: pci 0000:03:00.2: PCI bridge to [bus 20-28]
May 28 16:06:13 gibson kernel: pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
May 28 16:06:13 gibson kernel: pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf75fffff]
May 28 16:06:13 gibson kernel: pci 0000:00:01.3: PCI bridge to [bus 03-28]
May 28 16:06:13 gibson kernel: pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
May 28 16:06:13 gibson kernel: pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf76fffff]
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: PCI bridge to [bus 29]
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
May 28 16:06:13 gibson kernel: pci 0000:00:07.1: PCI bridge to [bus 2a]
May 28 16:06:13 gibson kernel: pci 0000:00:08.1: PCI bridge to [bus 2b]
May 28 16:06:13 gibson kernel: pci 0000:00:08.1: bridge window [mem 0xf7200000-0xf74fffff]
May 28 16:06:13 gibson kernel: pci 0000:00:08.2: PCI bridge to [bus 30]
May 28 16:06:13 gibson kernel: pci 0000:00:08.2: bridge window [mem 0xf7800000-0xf78fffff]
May 28 16:06:13 gibson kernel: pci 0000:00:08.3: PCI bridge to [bus 31]
May 28 16:06:13 gibson kernel: pci 0000:00:08.3: bridge window [mem 0xf7700000-0xf77fffff]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfec2ffff window]
May 28 16:06:13 gibson kernel: pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
May 28 16:06:13 gibson kernel: pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
May 28 16:06:13 gibson kernel: pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf76fffff]
May 28 16:06:13 gibson kernel: pci_bus 0000:20: resource 0 [io 0xf000-0xffff]
May 28 16:06:13 gibson kernel: pci_bus 0000:20: resource 1 [mem 0xf7500000-0xf75fffff]
May 28 16:06:13 gibson kernel: pci_bus 0000:25: resource 0 [io 0xf000-0xffff]
May 28 16:06:13 gibson kernel: pci_bus 0000:25: resource 1 [mem 0xf7500000-0xf75fffff]
May 28 16:06:13 gibson kernel: pci_bus 0000:29: resource 0 [io 0xe000-0xefff]
May 28 16:06:13 gibson kernel: pci_bus 0000:29: resource 1 [mem 0xf6000000-0xf70fffff]
May 28 16:06:13 gibson kernel: pci_bus 0000:29: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
May 28 16:06:13 gibson kernel: pci_bus 0000:2b: resource 1 [mem 0xf7200000-0xf74fffff]
May 28 16:06:13 gibson kernel: pci_bus 0000:30: resource 1 [mem 0xf7800000-0xf78fffff]
May 28 16:06:13 gibson kernel: pci_bus 0000:31: resource 1 [mem 0xf7700000-0xf77fffff]
May 28 16:06:13 gibson kernel: pci 0000:29:00.1: D0 power state depends on 0000:29:00.0
May 28 16:06:13 gibson kernel: PCI: CLS 64 bytes, default 64
May 28 16:06:13 gibson kernel: pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
May 28 16:06:13 gibson kernel: pci 0000:00:01.0: Adding to iommu group 0
May 28 16:06:13 gibson kernel: pci 0000:00:01.3: Adding to iommu group 1
May 28 16:06:13 gibson kernel: Trying to unpack rootfs image as initramfs...
May 28 16:06:13 gibson kernel: pci 0000:00:02.0: Adding to iommu group 2
May 28 16:06:13 gibson kernel: pci 0000:00:03.0: Adding to iommu group 3
May 28 16:06:13 gibson kernel: pci 0000:00:03.1: Adding to iommu group 4
May 28 16:06:13 gibson kernel: pci 0000:00:04.0: Adding to iommu group 5
May 28 16:06:13 gibson kernel: pci 0000:00:05.0: Adding to iommu group 6
May 28 16:06:13 gibson kernel: pci 0000:00:07.0: Adding to iommu group 7
May 28 16:06:13 gibson kernel: pci 0000:00:07.1: Adding to iommu group 8
May 28 16:06:13 gibson kernel: pci 0000:00:08.0: Adding to iommu group 9
May 28 16:06:13 gibson kernel: pci 0000:00:08.1: Adding to iommu group 10
May 28 16:06:13 gibson kernel: pci 0000:00:08.2: Adding to iommu group 11
May 28 16:06:13 gibson kernel: pci 0000:00:08.3: Adding to iommu group 12
May 28 16:06:13 gibson kernel: pci 0000:00:14.0: Adding to iommu group 13
May 28 16:06:13 gibson kernel: pci 0000:00:14.3: Adding to iommu group 13
May 28 16:06:13 gibson kernel: pci 0000:00:18.0: Adding to iommu group 14
May 28 16:06:13 gibson kernel: pci 0000:00:18.1: Adding to iommu group 14
May 28 16:06:13 gibson kernel: pci 0000:00:18.2: Adding to iommu group 14
May 28 16:06:13 gibson kernel: pci 0000:00:18.3: Adding to iommu group 14
May 28 16:06:13 gibson kernel: pci 0000:00:18.4: Adding to iommu group 14
May 28 16:06:13 gibson kernel: pci 0000:00:18.5: Adding to iommu group 14
May 28 16:06:13 gibson kernel: pci 0000:00:18.6: Adding to iommu group 14
May 28 16:06:13 gibson kernel: pci 0000:00:18.7: Adding to iommu group 14
May 28 16:06:13 gibson kernel: pci 0000:03:00.0: Adding to iommu group 15
May 28 16:06:13 gibson kernel: pci 0000:03:00.1: Adding to iommu group 15
May 28 16:06:13 gibson kernel: pci 0000:03:00.2: Adding to iommu group 15
May 28 16:06:13 gibson kernel: pci 0000:20:00.0: Adding to iommu group 15
May 28 16:06:13 gibson kernel: pci 0000:20:01.0: Adding to iommu group 15
May 28 16:06:13 gibson kernel: pci 0000:20:04.0: Adding to iommu group 15
May 28 16:06:13 gibson kernel: pci 0000:20:06.0: Adding to iommu group 15
May 28 16:06:13 gibson kernel: pci 0000:20:07.0: Adding to iommu group 15
May 28 16:06:13 gibson kernel: pci 0000:25:00.0: Adding to iommu group 15
May 28 16:06:13 gibson kernel: pci 0000:29:00.0: Adding to iommu group 16
May 28 16:06:13 gibson kernel: pci 0000:29:00.1: Adding to iommu group 16
May 28 16:06:13 gibson kernel: pci 0000:2a:00.0: Adding to iommu group 17
May 28 16:06:13 gibson kernel: pci 0000:2b:00.0: Adding to iommu group 18
May 28 16:06:13 gibson kernel: pci 0000:2b:00.1: Adding to iommu group 19
May 28 16:06:13 gibson kernel: pci 0000:2b:00.3: Adding to iommu group 20
May 28 16:06:13 gibson kernel: pci 0000:2b:00.4: Adding to iommu group 21
May 28 16:06:13 gibson kernel: pci 0000:30:00.0: Adding to iommu group 22
May 28 16:06:13 gibson kernel: pci 0000:31:00.0: Adding to iommu group 23
May 28 16:06:13 gibson kernel: pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
May 28 16:06:13 gibson kernel: AMD-Vi: Extended features (0x58f77ef22294ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
May 28 16:06:13 gibson kernel: AMD-Vi: Interrupt remapping enabled
May 28 16:06:13 gibson kernel: AMD-Vi: Virtual APIC enabled
May 28 16:06:13 gibson kernel: AMD-Vi: X2APIC enabled
May 28 16:06:13 gibson kernel: software IO TLB: tearing down default memory pool
May 28 16:06:13 gibson kernel: LVT offset 0 assigned for vector 0x400
May 28 16:06:13 gibson kernel: perf: AMD IBS detected (0x000003ff)
May 28 16:06:13 gibson kernel: perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
May 28 16:06:13 gibson kernel: Initialise system trusted keyrings
May 28 16:06:13 gibson kernel: Key type blacklist registered
May 28 16:06:13 gibson kernel: workingset: timestamp_bits=41 max_order=22 bucket_order=0
May 28 16:06:13 gibson kernel: zbud: loaded
May 28 16:06:13 gibson kernel: Key type asymmetric registered
May 28 16:06:13 gibson kernel: Asymmetric key parser 'x509' registered
May 28 16:06:13 gibson kernel: Freeing initrd memory: 8796K
May 28 16:06:13 gibson kernel: alg: self-tests for CTR-KDF (hmac(sha256)) passed
May 28 16:06:13 gibson kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
May 28 16:06:13 gibson kernel: io scheduler mq-deadline registered
May 28 16:06:13 gibson kernel: io scheduler kyber registered
May 28 16:06:13 gibson kernel: io scheduler bfq registered
May 28 16:06:13 gibson kernel: pcieport 0000:00:07.1: AER: enabled with IRQ 29
May 28 16:06:13 gibson kernel: pcieport 0000:00:08.1: AER: enabled with IRQ 30
May 28 16:06:13 gibson kernel: pcieport 0000:00:08.2: AER: enabled with IRQ 31
May 28 16:06:13 gibson kernel: pcieport 0000:00:08.3: AER: enabled with IRQ 32
May 28 16:06:13 gibson kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May 28 16:06:13 gibson kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
May 28 16:06:13 gibson kernel: ACPI: button: Power Button [PWRB]
May 28 16:06:13 gibson kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
May 28 16:06:13 gibson kernel: ACPI: button: Power Button [PWRF]
May 28 16:06:13 gibson kernel: smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1110
May 28 16:06:13 gibson kernel: Monitor-Mwait will be used to enter C-1 state
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C000: Found 2 idle states
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C002: Found 2 idle states
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C004: Found 2 idle states
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C006: Found 2 idle states
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C008: Found 2 idle states
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C00A: Found 2 idle states
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C001: Found 2 idle states
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C003: Found 2 idle states
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C005: Found 2 idle states
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C007: Found 2 idle states
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C009: Found 2 idle states
May 28 16:06:13 gibson kernel: ACPI: \_PR_.C00B: Found 2 idle states
May 28 16:06:13 gibson kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
May 28 16:06:13 gibson kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
May 28 16:06:13 gibson kernel: Non-volatile memory driver v1.3
May 28 16:06:13 gibson kernel: Linux agpgart interface v0.103
May 28 16:06:13 gibson kernel: AMD-Vi: AMD IOMMUv2 loaded and initialized
May 28 16:06:13 gibson kernel: ahci 0000:03:00.1: version 3.0
May 28 16:06:13 gibson kernel: ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
May 28 16:06:13 gibson kernel: ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
May 28 16:06:13 gibson kernel: ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
May 28 16:06:13 gibson kernel: scsi host0: ahci
May 28 16:06:13 gibson kernel: scsi host1: ahci
May 28 16:06:13 gibson kernel: scsi host2: ahci
May 28 16:06:13 gibson kernel: scsi host3: ahci
May 28 16:06:13 gibson kernel: scsi host4: ahci
May 28 16:06:13 gibson kernel: scsi host5: ahci
May 28 16:06:13 gibson kernel: scsi host6: ahci
May 28 16:06:13 gibson kernel: scsi host7: ahci
May 28 16:06:13 gibson kernel: ata1: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680100 irq 41
May 28 16:06:13 gibson kernel: ata2: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680180 irq 41
May 28 16:06:13 gibson kernel: ata3: DUMMY
May 28 16:06:13 gibson kernel: ata4: DUMMY
May 28 16:06:13 gibson kernel: ata5: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680300 irq 41
May 28 16:06:13 gibson kernel: ata6: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680380 irq 41
May 28 16:06:13 gibson kernel: ata7: DUMMY
May 28 16:06:13 gibson kernel: ata8: DUMMY
May 28 16:06:13 gibson kernel: ahci 0000:30:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
May 28 16:06:13 gibson kernel: ahci 0000:30:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
May 28 16:06:13 gibson kernel: scsi host8: ahci
May 28 16:06:13 gibson kernel: ata9: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800100 irq 43
May 28 16:06:13 gibson kernel: ahci 0000:31:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
May 28 16:06:13 gibson kernel: ahci 0000:31:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
May 28 16:06:13 gibson kernel: scsi host9: ahci
May 28 16:06:13 gibson kernel: ata10: SATA max UDMA/133 abar m2048@0xf7700000 port 0xf7700100 irq 45
May 28 16:06:13 gibson kernel: ACPI: bus type drm_connector registered
May 28 16:06:13 gibson kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 28 16:06:13 gibson kernel: ehci-pci: EHCI PCI platform driver
May 28 16:06:13 gibson kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 28 16:06:13 gibson kernel: ohci-pci: OHCI PCI platform driver
May 28 16:06:13 gibson kernel: uhci_hcd: USB Universal Host Controller Interface driver
May 28 16:06:13 gibson kernel: usbcore: registered new interface driver usbserial_generic
May 28 16:06:13 gibson kernel: usbserial: USB Serial support registered for generic
May 28 16:06:13 gibson kernel: rtc_cmos 00:02: RTC can wake from S4
May 28 16:06:13 gibson kernel: rtc_cmos 00:02: registered as rtc0
May 28 16:06:13 gibson kernel: rtc_cmos 00:02: setting system clock to 2022-05-28T23:06:10 UTC (1653779170)
May 28 16:06:13 gibson kernel: rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
May 28 16:06:13 gibson kernel: ledtrig-cpu: registered to indicate activity on CPUs
May 28 16:06:13 gibson kernel: efifb: probing for efifb
May 28 16:06:13 gibson kernel: efifb: Ignoring BGRT: unexpected or invalid BMP data
May 28 16:06:13 gibson kernel: efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
May 28 16:06:13 gibson kernel: efifb: mode is 1024x768x32, linelength=4096, pages=1
May 28 16:06:13 gibson kernel: efifb: scrolling: redraw
May 28 16:06:13 gibson kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
May 28 16:06:13 gibson kernel: fbcon: Deferring console take-over
May 28 16:06:13 gibson kernel: fb0: EFI VGA frame buffer device
May 28 16:06:13 gibson kernel: hid: raw HID events driver (C) Jiri Kosina
May 28 16:06:13 gibson kernel: drop_monitor: Initializing network drop monitor service
May 28 16:06:13 gibson kernel: Initializing XFRM netlink socket
May 28 16:06:13 gibson kernel: NET: Registered PF_INET6 protocol family
May 28 16:06:13 gibson kernel: Segment Routing with IPv6
May 28 16:06:13 gibson kernel: RPL Segment Routing with IPv6
May 28 16:06:13 gibson kernel: In-situ OAM (IOAM) with IPv6
May 28 16:06:13 gibson kernel: NET: Registered PF_PACKET protocol family
May 28 16:06:13 gibson kernel: microcode: CPU0: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: CPU1: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: CPU2: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: CPU3: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: CPU4: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: CPU5: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: CPU6: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: CPU7: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: CPU8: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: CPU9: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: CPU10: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: CPU11: patch_level=0x08701013
May 28 16:06:13 gibson kernel: microcode: Microcode Update Driver: v2.2.
May 28 16:06:13 gibson kernel: resctrl: L3 allocation detected
May 28 16:06:13 gibson kernel: resctrl: MB allocation detected
May 28 16:06:13 gibson kernel: resctrl: L3 monitoring detected
May 28 16:06:13 gibson kernel: IPI shorthand broadcast: enabled
May 28 16:06:13 gibson kernel: sched_clock: Marking stable (239716186, -6996671)->(254981105, -22261590)
May 28 16:06:13 gibson kernel: registered taskstats version 1
May 28 16:06:13 gibson kernel: Loading compiled-in X.509 certificates
May 28 16:06:13 gibson kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 3928b987e6fa9bf2c9f56b4175920ce6c635e9da'
May 28 16:06:13 gibson kernel: zswap: loaded using pool lz4/z3fold
May 28 16:06:13 gibson kernel: Key type ._fscrypt registered
May 28 16:06:13 gibson kernel: Key type .fscrypt registered
May 28 16:06:13 gibson kernel: Key type fscrypt-provisioning registered
May 28 16:06:13 gibson kernel: PM: Magic number: 6:604:151
May 28 16:06:13 gibson kernel: ata_port ata8: hash matches
May 28 16:06:13 gibson kernel: ata8: hash matches
May 28 16:06:13 gibson kernel: RAS: Correctable Errors collector initialized.
May 28 16:06:13 gibson kernel: ata10: SATA link down (SStatus 0 SControl 300)
May 28 16:06:13 gibson kernel: ata9: SATA link down (SStatus 0 SControl 300)
May 28 16:06:13 gibson kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 28 16:06:13 gibson kernel: ata1.00: supports DRM functions and may not be fully accessible
May 28 16:06:13 gibson kernel: ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
May 28 16:06:13 gibson kernel: ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
May 28 16:06:13 gibson kernel: ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
May 28 16:06:13 gibson kernel: ata1.00: supports DRM functions and may not be fully accessible
May 28 16:06:13 gibson kernel: ata1.00: configured for UDMA/133
May 28 16:06:13 gibson kernel: scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
May 28 16:06:13 gibson kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
May 28 16:06:13 gibson kernel: sd 0:0:0:0: [sda] Write Protect is off
May 28 16:06:13 gibson kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 28 16:06:13 gibson kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 28 16:06:13 gibson kernel: sda: sda1 sda2 sda3
May 28 16:06:13 gibson kernel: sd 0:0:0:0: [sda] supports TCG Opal
May 28 16:06:13 gibson kernel: sd 0:0:0:0: [sda] Attached SCSI disk
May 28 16:06:13 gibson kernel: ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 28 16:06:13 gibson kernel: ata2.00: ATA-9: WDC WD80EFAX-68KNBN0, 81.00A81, max UDMA/133
May 28 16:06:13 gibson kernel: ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
May 28 16:06:13 gibson kernel: ata2.00: Features: NCQ-sndrcv NCQ-prio
May 28 16:06:13 gibson kernel: ata2.00: configured for UDMA/133
May 28 16:06:13 gibson kernel: scsi 1:0:0:0: Direct-Access ATA WDC WD80EFAX-68K 0A81 PQ: 0 ANSI: 5
May 28 16:06:13 gibson kernel: sd 1:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
May 28 16:06:13 gibson kernel: sd 1:0:0:0: [sdb] 4096-byte physical blocks
May 28 16:06:13 gibson kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 28 16:06:13 gibson kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
May 28 16:06:13 gibson kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 28 16:06:13 gibson kernel: sdb: sdb1
May 28 16:06:13 gibson kernel: tsc: Refined TSC clocksource calibration: 3599.999 MHz
May 28 16:06:13 gibson kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4525366a, max_idle_ns: 440795257657 ns
May 28 16:06:13 gibson kernel: clocksource: Switched to clocksource tsc
May 28 16:06:13 gibson kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
May 28 16:06:13 gibson kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 28 16:06:13 gibson kernel: ata5.00: ATA-9: WDC WD80EFAX-68KNBN0, 81.00A81, max UDMA/133
May 28 16:06:13 gibson kernel: ata5.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
May 28 16:06:13 gibson kernel: ata5.00: Features: NCQ-sndrcv NCQ-prio
May 28 16:06:13 gibson kernel: ata5.00: configured for UDMA/133
May 28 16:06:13 gibson kernel: scsi 4:0:0:0: Direct-Access ATA WDC WD80EFAX-68K 0A81 PQ: 0 ANSI: 5
May 28 16:06:13 gibson kernel: sd 4:0:0:0: [sdc] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
May 28 16:06:13 gibson kernel: sd 4:0:0:0: [sdc] 4096-byte physical blocks
May 28 16:06:13 gibson kernel: sd 4:0:0:0: [sdc] Write Protect is off
May 28 16:06:13 gibson kernel: sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
May 28 16:06:13 gibson kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 28 16:06:13 gibson kernel: sdc: sdc1
May 28 16:06:13 gibson kernel: sd 4:0:0:0: [sdc] Attached SCSI disk
May 28 16:06:13 gibson kernel: ata6: SATA link down (SStatus 0 SControl 330)
May 28 16:06:13 gibson kernel: Freeing unused decrypted memory: 2036K
May 28 16:06:13 gibson kernel: Freeing unused kernel image (initmem) memory: 1872K
May 28 16:06:13 gibson kernel: Write protecting the kernel read-only data: 30720k
May 28 16:06:13 gibson kernel: Freeing unused kernel image (text/rodata gap) memory: 2040K
May 28 16:06:13 gibson kernel: Freeing unused kernel image (rodata/data gap) memory: 1364K
May 28 16:06:13 gibson kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
May 28 16:06:13 gibson kernel: rodata_test: all tests were successful
May 28 16:06:13 gibson kernel: Run /init as init process
May 28 16:06:13 gibson kernel: with arguments:
May 28 16:06:13 gibson kernel: /init
May 28 16:06:13 gibson kernel: splash
May 28 16:06:13 gibson kernel: with environment:
May 28 16:06:13 gibson kernel: HOME=/
May 28 16:06:13 gibson kernel: TERM=linux
May 28 16:06:13 gibson kernel: fbcon: Taking over console
May 28 16:06:13 gibson kernel: Console: switching to colour frame buffer device 128x48
May 28 16:06:13 gibson kernel: xhci_hcd 0000:03:00.0: xHCI Host Controller
May 28 16:06:13 gibson kernel: xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
May 28 16:06:13 gibson kernel: xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
May 28 16:06:13 gibson kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
May 28 16:06:13 gibson kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 16:06:13 gibson kernel: usb usb1: Product: xHCI Host Controller
May 28 16:06:13 gibson kernel: usb usb1: Manufacturer: Linux 5.18.0-zen1-1-zen xhci-hcd
May 28 16:06:13 gibson kernel: usb usb1: SerialNumber: 0000:03:00.0
May 28 16:06:13 gibson kernel: hub 1-0:1.0: USB hub found
May 28 16:06:13 gibson kernel: hub 1-0:1.0: 10 ports detected
May 28 16:06:13 gibson kernel: xhci_hcd 0000:03:00.0: xHCI Host Controller
May 28 16:06:13 gibson kernel: xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
May 28 16:06:13 gibson kernel: xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
May 28 16:06:13 gibson kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
May 28 16:06:13 gibson kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
May 28 16:06:13 gibson kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 16:06:13 gibson kernel: usb usb2: Product: xHCI Host Controller
May 28 16:06:13 gibson kernel: usb usb2: Manufacturer: Linux 5.18.0-zen1-1-zen xhci-hcd
May 28 16:06:13 gibson kernel: usb usb2: SerialNumber: 0000:03:00.0
May 28 16:06:13 gibson kernel: hub 2-0:1.0: USB hub found
May 28 16:06:13 gibson kernel: hub 2-0:1.0: 4 ports detected
May 28 16:06:13 gibson kernel: xhci_hcd 0000:2b:00.3: xHCI Host Controller
May 28 16:06:13 gibson kernel: xhci_hcd 0000:2b:00.3: new USB bus registered, assigned bus number 3
May 28 16:06:13 gibson kernel: xhci_hcd 0000:2b:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
May 28 16:06:13 gibson kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
May 28 16:06:13 gibson kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 16:06:13 gibson kernel: usb usb3: Product: xHCI Host Controller
May 28 16:06:13 gibson kernel: usb usb3: Manufacturer: Linux 5.18.0-zen1-1-zen xhci-hcd
May 28 16:06:13 gibson kernel: usb usb3: SerialNumber: 0000:2b:00.3
May 28 16:06:13 gibson kernel: hub 3-0:1.0: USB hub found
May 28 16:06:13 gibson kernel: hub 3-0:1.0: 4 ports detected
May 28 16:06:13 gibson kernel: xhci_hcd 0000:2b:00.3: xHCI Host Controller
May 28 16:06:13 gibson kernel: xhci_hcd 0000:2b:00.3: new USB bus registered, assigned bus number 4
May 28 16:06:13 gibson kernel: xhci_hcd 0000:2b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
May 28 16:06:13 gibson kernel: usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
May 28 16:06:13 gibson kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
May 28 16:06:13 gibson kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 16:06:13 gibson kernel: usb usb4: Product: xHCI Host Controller
May 28 16:06:13 gibson kernel: usb usb4: Manufacturer: Linux 5.18.0-zen1-1-zen xhci-hcd
May 28 16:06:13 gibson kernel: usb usb4: SerialNumber: 0000:2b:00.3
May 28 16:06:13 gibson kernel: hub 4-0:1.0: USB hub found
May 28 16:06:13 gibson kernel: hub 4-0:1.0: 4 ports detected
May 28 16:06:13 gibson kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
May 28 16:06:13 gibson kernel: usb 1-1: new full-speed USB device number 2 using xhci_hcd
May 28 16:06:13 gibson systemd[1]: Successfully credited entropy passed from boot loader.
May 28 16:06:13 gibson systemd[1]: systemd 251.1-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
May 28 16:06:13 gibson systemd[1]: Detected architecture x86-64.
May 28 16:06:13 gibson systemd[1]: Hostname set to <gibson>.
May 28 16:06:13 gibson kernel: usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
May 28 16:06:13 gibson kernel: usb 4-4: New USB device found, idVendor=0bc2, idProduct=2344, bcdDevice= 7.12
May 28 16:06:13 gibson kernel: usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 28 16:06:13 gibson kernel: usb 4-4: Product: Portable
May 28 16:06:13 gibson kernel: usb 4-4: Manufacturer: Seagate
May 28 16:06:13 gibson kernel: usb 4-4: SerialNumber: NAAHMZ8V
May 28 16:06:13 gibson systemd[1]: Queued start job for default target Graphical Interface.
May 28 16:06:13 gibson systemd[1]: Created slice Slice /system/getty.
May 28 16:06:13 gibson systemd[1]: Created slice Slice /system/modprobe.
May 28 16:06:13 gibson systemd[1]: Created slice Slice /system/systemd-fsck.
May 28 16:06:13 gibson systemd[1]: Created slice User and Session Slice.
May 28 16:06:13 gibson systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
May 28 16:06:13 gibson systemd[1]: Started Forward Password Requests to Wall Directory Watch.
May 28 16:06:13 gibson systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
May 28 16:06:13 gibson systemd[1]: Reached target Local Encrypted Volumes.
May 28 16:06:13 gibson systemd[1]: Reached target Local Integrity Protected Volumes.
May 28 16:06:13 gibson systemd[1]: Reached target Path Units.
May 28 16:06:13 gibson systemd[1]: Reached target Remote File Systems.
May 28 16:06:13 gibson systemd[1]: Reached target Slice Units.
May 28 16:06:13 gibson systemd[1]: Reached target System Time Set.
May 28 16:06:13 gibson systemd[1]: Reached target Local Verity Protected Volumes.
May 28 16:06:13 gibson systemd[1]: Listening on Device-mapper event daemon FIFOs.
May 28 16:06:13 gibson systemd[1]: Listening on LVM2 poll daemon socket.
May 28 16:06:13 gibson systemd[1]: Listening on Process Core Dump Socket.
May 28 16:06:13 gibson systemd[1]: Listening on Journal Audit Socket.
May 28 16:06:13 gibson systemd[1]: Listening on Journal Socket (/dev/log).
May 28 16:06:13 gibson systemd[1]: Listening on Journal Socket.
May 28 16:06:13 gibson systemd[1]: Listening on udev Control Socket.
May 28 16:06:13 gibson systemd[1]: Listening on udev Kernel Socket.
May 28 16:06:13 gibson systemd[1]: Mounting Huge Pages File System...
May 28 16:06:13 gibson systemd[1]: Mounting POSIX Message Queue File System...
May 28 16:06:13 gibson systemd[1]: Mounting Kernel Debug File System...
May 28 16:06:13 gibson systemd[1]: Mounting Kernel Trace File System...
May 28 16:06:13 gibson systemd[1]: Starting Create List of Static Device Nodes...
May 28 16:06:13 gibson systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
May 28 16:06:13 gibson systemd[1]: Starting Load Kernel Module configfs...
May 28 16:06:13 gibson systemd[1]: Starting Load Kernel Module drm...
May 28 16:06:13 gibson systemd[1]: Starting Load Kernel Module fuse...
May 28 16:06:13 gibson systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
May 28 16:06:13 gibson systemd[1]: Starting Load Kernel Modules...
May 28 16:06:13 gibson systemd[1]: Starting Remount Root and Kernel File Systems...
May 28 16:06:13 gibson systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
May 28 16:06:13 gibson systemd[1]: Starting Coldplug All udev Devices...
May 28 16:06:13 gibson systemd[1]: Mounted Huge Pages File System.
May 28 16:06:13 gibson systemd[1]: Mounted POSIX Message Queue File System.
May 28 16:06:13 gibson systemd[1]: Mounted Kernel Debug File System.
May 28 16:06:13 gibson systemd[1]: Mounted Kernel Trace File System.
May 28 16:06:13 gibson systemd[1]: Finished Create List of Static Device Nodes.
May 28 16:06:13 gibson systemd[1]: modprobe@configfs.service: Deactivated successfully.
May 28 16:06:13 gibson systemd[1]: Finished Load Kernel Module configfs.
May 28 16:06:13 gibson systemd[1]: modprobe@drm.service: Deactivated successfully.
May 28 16:06:13 gibson systemd[1]: Finished Load Kernel Module drm.
May 28 16:06:13 gibson systemd[1]: Mounting Kernel Configuration File System...
May 28 16:06:13 gibson systemd[1]: Mounted Kernel Configuration File System.
May 28 16:06:13 gibson kernel: EXT4-fs (sda2): re-mounted. Quota mode: none.
May 28 16:06:13 gibson systemd[1]: Finished Remount Root and Kernel File Systems.
May 28 16:06:13 gibson systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 16:06:13 gibson kernel: fuse: init (API version 7.36)
May 28 16:06:13 gibson systemd[1]: Rebuild Hardware Database was skipped because all trigger condition checks failed.
May 28 16:06:13 gibson systemd[1]: Starting Load/Save Random Seed...
May 28 16:06:13 gibson systemd[1]: Starting Create System Users...
May 28 16:06:13 gibson systemd[1]: modprobe@fuse.service: Deactivated successfully.
May 28 16:06:13 gibson systemd[1]: Finished Load Kernel Module fuse.
May 28 16:06:13 gibson systemd[1]: Mounting FUSE Control File System...
May 28 16:06:13 gibson systemd[1]: Mounted FUSE Control File System.
May 28 16:06:13 gibson kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
May 28 16:06:13 gibson kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
May 28 16:06:13 gibson kernel: sd 4:0:0:0: Attached scsi generic sg2 type 0
May 28 16:06:13 gibson systemd[1]: Finished Load/Save Random Seed.
May 28 16:06:13 gibson systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 16:06:13 gibson systemd[1]: Finished Create System Users.
May 28 16:06:13 gibson systemd[1]: Starting Create Static Device Nodes in /dev...
May 28 16:06:13 gibson systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
May 28 16:06:13 gibson systemd[1]: Finished Coldplug All udev Devices.
May 28 16:06:13 gibson systemd[1]: Finished Create Static Device Nodes in /dev.
May 28 16:06:13 gibson systemd[1]: Reached target Preparation for Local File Systems.
May 28 16:06:13 gibson systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of a failed condition check (ConditionPathExists=/var/lib/machines.raw).
May 28 16:06:13 gibson systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of a failed condition check (ConditionKernelVersion=<5.6).
May 28 16:06:13 gibson systemd[1]: Starting Journal Service...
May 28 16:06:13 gibson systemd[1]: Starting Rule-based Manager for Device Events and Files...
May 28 16:06:13 gibson systemd-journald[337]: Journal started
May 28 16:06:13 gibson systemd-journald[337]: Runtime Journal (/run/log/journal/44b35a27b93d43dcb0fdea5a63a529ed) is 8.0M, max 800.3M, 792.3M free.
May 28 16:06:12 gibson systemd-modules-load[325]: Inserted module 'crypto_user'
May 28 16:06:13 gibson systemd[1]: Started Journal Service.
May 28 16:06:13 gibson kernel: audit: type=1130 audit(1653779173.068:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:12 gibson systemd-modules-load[325]: Inserted module 'sg'
May 28 16:06:13 gibson systemd-udevd[338]: Using default interface naming scheme 'v251'.
May 28 16:06:13 gibson systemd-udevd[338]: Configuration file /usr/lib/udev/rules.d/77-mm-fibocom-port-types.rules is marked executable. Please remove executable permission bits. Proceeding anyway.
May 28 16:06:13 gibson systemd[1]: Starting Flush Journal to Persistent Storage...
May 28 16:06:13 gibson systemd-journald[337]: Time spent on flushing to /var/log/journal/44b35a27b93d43dcb0fdea5a63a529ed is 50.801ms for 975 entries.
May 28 16:06:13 gibson systemd-journald[337]: System Journal (/var/log/journal/44b35a27b93d43dcb0fdea5a63a529ed) is 2.1G, max 4.0G, 1.8G free.
May 28 16:06:13 gibson systemd-journald[337]: Received client request to flush runtime journal.
May 28 16:06:13 gibson kernel: audit: type=1130 audit(1653779173.073:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson kernel: nvidia: loading out-of-tree module taints kernel.
May 28 16:06:13 gibson kernel: nvidia: module license 'NVIDIA' taints kernel.
May 28 16:06:13 gibson kernel: Disabling lock debugging due to kernel taint
May 28 16:06:13 gibson kernel: acpi_cpufreq: overriding BIOS provided _PSD data
May 28 16:06:13 gibson kernel: nvidia: module verification failed: signature and/or required key missing - tainting kernel
May 28 16:06:13 gibson kernel: acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
May 28 16:06:13 gibson kernel: usb 1-1: New USB device found, idVendor=05ac, idProduct=024f, bcdDevice= 1.12
May 28 16:06:13 gibson kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 28 16:06:13 gibson kernel: usb 1-1: Product: Keychron K6
May 28 16:06:13 gibson kernel: usb 1-1: Manufacturer: Keychron
May 28 16:06:13 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson systemd[1]: Started Rule-based Manager for Device Events and Files.
May 28 16:06:13 gibson mtp-probe[404]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:08.1/0000:2b:00.3/usb4/4-4"
May 28 16:06:13 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson systemd[1]: Finished Flush Journal to Persistent Storage.
May 28 16:06:13 gibson mtp-probe[404]: bus: 4, device: 2 was not an MTP device
May 28 16:06:13 gibson kernel: audit: type=1130 audit(1653779173.195:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson systemd[1]: Found device Samsung_SSD_850_EVO_500GB 1.
May 28 16:06:13 gibson systemd[1]: Starting File System Check on /dev/disk/by-uuid/D2F4-566C...
May 28 16:06:13 gibson systemd[1]: Found device Samsung_SSD_850_EVO_500GB 3.
May 28 16:06:13 gibson systemd[1]: Activating swap /dev/disk/by-uuid/7c111466-0d33-4d77-9ffd-e3062150d5d5...
May 28 16:06:13 gibson kernel: Adding 9227464k swap on /dev/sda3. Priority:-2 extents:1 across:9227464k SSFS
May 28 16:06:13 gibson systemd[1]: Activated swap /dev/disk/by-uuid/7c111466-0d33-4d77-9ffd-e3062150d5d5.
May 28 16:06:13 gibson systemd[1]: Reached target Swaps.
May 28 16:06:13 gibson systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
May 28 16:06:13 gibson systemd[1]: Mounting Temporary Directory /tmp...
May 28 16:06:13 gibson systemd[1]: Mounted Temporary Directory /tmp.
May 28 16:06:13 gibson systemd-fsck[427]: fsck.fat 4.2 (2021-01-31)
May 28 16:06:13 gibson systemd-fsck[427]: /dev/sda1: 29 files, 29061/76646 clusters
May 28 16:06:13 gibson systemd[1]: Finished File System Check on /dev/disk/by-uuid/D2F4-566C.
May 28 16:06:13 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-D2F4\x2d566C comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson kernel: audit: type=1130 audit(1653779173.258:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-D2F4\x2d566C comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson kernel: usb 1-8: new full-speed USB device number 3 using xhci_hcd
May 28 16:06:13 gibson kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
May 28 16:06:13 gibson kernel: piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
May 28 16:06:13 gibson kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
May 28 16:06:13 gibson kernel: usbcore: registered new interface driver usb-storage
May 28 16:06:13 gibson kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 237
May 28 16:06:13 gibson kernel:
May 28 16:06:13 gibson kernel: RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
May 28 16:06:13 gibson kernel: RAPL PMU: hw unit of domain package 2^-16 Joules
May 28 16:06:13 gibson kernel: nvidia 0000:29:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
May 28 16:06:13 gibson kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
May 28 16:06:13 gibson kernel: cryptd: max_cpu_qlen set to 1000
May 28 16:06:13 gibson kernel: sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
May 28 16:06:13 gibson kernel: sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
May 28 16:06:13 gibson kernel: ccp 0000:2b:00.1: enabling device (0000 -> 0002)
May 28 16:06:13 gibson kernel: ccp 0000:2b:00.1: ccp: unable to access the device: you might be running a broken BIOS.
May 28 16:06:13 gibson kernel: scsi host10: uas
May 28 16:06:13 gibson kernel: usbcore: registered new interface driver uas
May 28 16:06:13 gibson kernel: scsi 10:0:0:0: Direct-Access Seagate Portable 0712 PQ: 0 ANSI: 6
May 28 16:06:13 gibson kernel: sd 10:0:0:0: Attached scsi generic sg3 type 0
May 28 16:06:13 gibson kernel: sd 10:0:0:0: [sdd] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
May 28 16:06:13 gibson kernel: sd 10:0:0:0: [sdd] 4096-byte physical blocks
May 28 16:06:13 gibson kernel: sd 10:0:0:0: [sdd] Write Protect is off
May 28 16:06:13 gibson kernel: sd 10:0:0:0: [sdd] Mode Sense: 53 00 00 08
May 28 16:06:13 gibson kernel: sd 10:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 28 16:06:13 gibson kernel: sd 10:0:0:0: [sdd] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
May 28 16:06:13 gibson kernel: AVX2 version of gcm_enc/dec engaged.
May 28 16:06:13 gibson kernel: AES CTR mode by8 optimization enabled
May 28 16:06:13 gibson kernel: sdd: sdd1
May 28 16:06:13 gibson kernel: sd 10:0:0:0: [sdd] Attached SCSI disk
May 28 16:06:13 gibson kernel: r8169 0000:25:00.0 eth0: RTL8168h/8111h, 2c:f0:5d:21:3e:c3, XID 541, IRQ 60
May 28 16:06:13 gibson kernel: r8169 0000:25:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
May 28 16:06:13 gibson kernel: SVM: TSC scaling supported
May 28 16:06:13 gibson kernel: kvm: Nested Virtualization enabled
May 28 16:06:13 gibson kernel: SVM: kvm: Nested Paging enabled
May 28 16:06:13 gibson kernel: SEV supported: 509 ASIDs
May 28 16:06:13 gibson kernel: SVM: Virtual VMLOAD VMSAVE supported
May 28 16:06:13 gibson kernel: SVM: Virtual GIF supported
May 28 16:06:13 gibson kernel: SVM: LBR virtualization supported
May 28 16:06:13 gibson kernel: MCE: In-kernel MCE decoding enabled.
May 28 16:06:13 gibson kernel: r8169 0000:25:00.0 enp37s0: renamed from eth0
May 28 16:06:13 gibson kernel: snd_hda_intel 0000:29:00.1: Disabling MSI
May 28 16:06:13 gibson kernel: snd_hda_intel 0000:29:00.1: Handle vga_switcheroo audio client
May 28 16:06:13 gibson kernel: snd_hda_intel 0000:2b:00.4: enabling device (0000 -> 0002)
May 28 16:06:13 gibson kernel: intel_rapl_common: Found RAPL domain package
May 28 16:06:13 gibson kernel: intel_rapl_common: Found RAPL domain core
May 28 16:06:13 gibson kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 515.43.04 Tue Apr 26 15:52:32 UTC 2022
May 28 16:06:13 gibson systemd-udevd[341]: nvidia: Process '/usr/bin/bash -c '/usr/bin/mknod -Z -m 666 /dev/nvidiactl c $(grep nvidia-frontend /proc/devices | cut -d \ -f 1) 255'' failed with exit code 1.
May 28 16:06:13 gibson kernel: nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
May 28 16:06:13 gibson kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input2
May 28 16:06:13 gibson kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input3
May 28 16:06:13 gibson kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input4
May 28 16:06:13 gibson kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input5
May 28 16:06:13 gibson kernel: input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input6
May 28 16:06:13 gibson kernel: input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input7
May 28 16:06:13 gibson kernel: input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input8
May 28 16:06:13 gibson kernel: nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 515.43.04 Tue Apr 26 15:44:44 UTC 2022
May 28 16:06:13 gibson systemd-modules-load[325]: Inserted module 'nvidia_uvm'
May 28 16:06:13 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
May 28 16:06:13 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
May 28 16:06:13 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
May 28 16:06:13 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
May 28 16:06:13 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: inputs:
May 28 16:06:13 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
May 28 16:06:13 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
May 28 16:06:13 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
May 28 16:06:13 gibson kernel: nvidia-uvm: Loaded the UVM driver, major device number 235.
May 28 16:06:13 gibson kernel: [drm] [nvidia-drm] [GPU ID 0x00002900] Loading driver
May 28 16:06:13 gibson kernel: [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:29:00.0 on minor 0
May 28 16:06:13 gibson systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of a failed condition check (ConditionKernelVersion=<5.6).
May 28 16:06:13 gibson systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 16:06:13 gibson systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 16:06:13 gibson systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
May 28 16:06:13 gibson systemd[1]: Rebuild Hardware Database was skipped because all trigger condition checks failed.
May 28 16:06:13 gibson systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
May 28 16:06:13 gibson kernel: vboxdrv: Found 12 processor cores
May 28 16:06:13 gibson kernel: input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:2b:00.4/sound/card1/input9
May 28 16:06:13 gibson kernel: input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:2b:00.4/sound/card1/input10
May 28 16:06:13 gibson kernel: input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:2b:00.4/sound/card1/input11
May 28 16:06:13 gibson kernel: input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:2b:00.4/sound/card1/input12
May 28 16:06:13 gibson kernel: input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:2b:00.4/sound/card1/input13
May 28 16:06:13 gibson systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of a failed condition check (ConditionKernelVersion=<5.6).
May 28 16:06:13 gibson systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 16:06:13 gibson systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 16:06:13 gibson systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
May 28 16:06:13 gibson systemd[1]: Rebuild Hardware Database was skipped because all trigger condition checks failed.
May 28 16:06:13 gibson systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
May 28 16:06:13 gibson kernel: vboxdrv: TSC mode is Invariant, tentative frequency 3599999089 Hz
May 28 16:06:13 gibson kernel: vboxdrv: Successfully loaded version 6.1.34 r150636 (interface 0x00320000)
May 28 16:06:13 gibson systemd-modules-load[325]: Inserted module 'vboxdrv'
May 28 16:06:13 gibson systemd-modules-load[325]: Inserted module 'vboxnetadp'
May 28 16:06:13 gibson kernel: VBoxNetAdp: Successfully started.
May 28 16:06:13 gibson systemd-modules-load[325]: Inserted module 'vboxnetflt'
May 28 16:06:13 gibson kernel: VBoxNetFlt: Successfully started.
May 28 16:06:13 gibson systemd[1]: Finished Load Kernel Modules.
May 28 16:06:13 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson systemd[1]: Starting Apply Kernel Variables...
May 28 16:06:13 gibson kernel: audit: type=1130 audit(1653779173.677:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson systemd[1]: Finished Apply Kernel Variables.
May 28 16:06:13 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson kernel: audit: type=1130 audit(1653779173.680:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson kernel: usb 1-8: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01
May 28 16:06:13 gibson kernel: usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 28 16:06:13 gibson systemd[1]: Starting CLI Netfilter Manager...
May 28 16:06:13 gibson mtp-probe[539]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1"
May 28 16:06:13 gibson mtp-probe[539]: bus: 1, device: 2 was not an MTP device
May 28 16:06:13 gibson kernel: usbcore: registered new device driver apple-mfi-fastcharge
May 28 16:06:13 gibson systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
May 28 16:06:13 gibson kernel: usbcore: registered new interface driver usbhid
May 28 16:06:13 gibson kernel: usbhid: USB HID core driver
May 28 16:06:13 gibson mtp-probe[564]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1"
May 28 16:06:13 gibson mtp-probe[564]: bus: 1, device: 2 was not an MTP device
May 28 16:06:13 gibson audit[567]: NETFILTER_CFG table=filter:2 family=2 entries=7 op=nft_register_chain pid=567 comm="iptables-restor"
May 28 16:06:13 gibson audit[567]: SYSCALL arch=c000003e syscall=46 success=yes exit=732 a0=3 a1=7ffea89e94b0 a2=0 a3=7ffea89e949c items=0 ppid=529 pid=567 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson kernel: audit: type=1325 audit(1653779173.790:8): table=filter:2 family=2 entries=7 op=nft_register_chain pid=567 comm="iptables-restor"
May 28 16:06:13 gibson kernel: audit: type=1300 audit(1653779173.790:8): arch=c000003e syscall=46 success=yes exit=732 a0=3 a1=7ffea89e94b0 a2=0 a3=7ffea89e949c items=0 ppid=529 pid=567 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson kernel: audit: type=1327 audit(1653779173.790:8): proctitle=69707461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson audit[571]: NETFILTER_CFG table=filter:3 family=2 entries=36 op=nft_register_chain pid=571 comm="iptables-restor"
May 28 16:06:13 gibson audit[571]: SYSCALL arch=c000003e syscall=46 success=yes exit=4440 a0=3 a1=7ffda2cfbeb0 a2=0 a3=7ffda2cfbe9c items=0 ppid=529 pid=571 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson kernel: Bluetooth: Core ver 2.22
May 28 16:06:13 gibson kernel: NET: Registered PF_BLUETOOTH protocol family
May 28 16:06:13 gibson kernel: Bluetooth: HCI device and connection manager initialized
May 28 16:06:13 gibson kernel: Bluetooth: HCI socket layer initialized
May 28 16:06:13 gibson kernel: Bluetooth: L2CAP socket layer initialized
May 28 16:06:13 gibson kernel: Bluetooth: SCO socket layer initialized
May 28 16:06:13 gibson kernel: input: Keychron Keychron K6 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1/1-1:1.0/0003:05AC:024F.0001/input/input14
May 28 16:06:13 gibson systemd-udevd[356]: nvidia: Process '/usr/bin/bash -c 'for i in $(cat /proc/driver/nvidia/gpus/*/information | grep Minor | cut -d \ -f 4); do /usr/bin/mknod -Z -m 666 /dev/nvidia${i} c $(grep nvidia-frontend /proc/devices | cut -d \ -f 1) ${i}; done'' failed with exit code 1.
May 28 16:06:13 gibson kernel: apple 0003:05AC:024F.0001: input,hidraw0: USB HID v1.11 Keyboard [Keychron Keychron K6] on usb-0000:03:00.0-1/input0
May 28 16:06:13 gibson kernel: apple 0003:05AC:024F.0002: Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling
May 28 16:06:13 gibson kernel: input: Keychron Keychron K6 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1/1-1:1.1/0003:05AC:024F.0002/input/input15
May 28 16:06:13 gibson audit[573]: NETFILTER_CFG table=filter:4 family=2 entries=2 op=nft_register_rule pid=573 comm="iptables-restor"
May 28 16:06:13 gibson audit[573]: SYSCALL arch=c000003e syscall=46 success=yes exit=984 a0=3 a1=7ffdf584f6e0 a2=0 a3=7ffdf584f6cc items=0 ppid=529 pid=573 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson audit[587]: NETFILTER_CFG table=filter:5 family=2 entries=2 op=nft_register_chain pid=587 comm="iptables-restor"
May 28 16:06:13 gibson audit[587]: SYSCALL arch=c000003e syscall=46 success=yes exit=160 a0=3 a1=7ffc12531c40 a2=0 a3=7ffc12531c2c items=0 ppid=529 pid=587 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson audit[590]: NETFILTER_CFG table=filter:6 family=2 entries=6 op=nft_register_chain pid=590 comm="iptables-restor"
May 28 16:06:13 gibson audit[590]: SYSCALL arch=c000003e syscall=46 success=yes exit=780 a0=3 a1=7fff104eae60 a2=0 a3=7fff104eae4c items=0 ppid=529 pid=590 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson kernel: usbcore: registered new interface driver btusb
May 28 16:06:13 gibson systemd[1]: Starting Load/Save RF Kill Switch Status...
May 28 16:06:13 gibson systemd[1]: Reached target Bluetooth Support.
May 28 16:06:13 gibson systemd[1]: Started Load/Save RF Kill Switch Status.
May 28 16:06:13 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson kernel: Bluetooth: hci0: Legacy ROM 2.x revision 5.0 build 25 week 20 2015
May 28 16:06:13 gibson kernel: Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
May 28 16:06:13 gibson audit[591]: NETFILTER_CFG table=filter:7 family=2 entries=25 op=nft_register_chain pid=591 comm="iptables-restor"
May 28 16:06:13 gibson audit[591]: SYSCALL arch=c000003e syscall=46 success=yes exit=7696 a0=3 a1=7ffc6ff91610 a2=0 a3=7ffc6ff915fc items=0 ppid=529 pid=591 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson audit[601]: NETFILTER_CFG table=filter:8 family=2 entries=7 op=nft_register_rule pid=601 comm="iptables-restor"
May 28 16:06:13 gibson audit[601]: SYSCALL arch=c000003e syscall=46 success=yes exit=2724 a0=3 a1=7ffd4e7f5b20 a2=0 a3=7ffd4e7f5b0c items=0 ppid=529 pid=601 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson kernel: apple 0003:05AC:024F.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Keychron Keychron K6] on usb-0000:03:00.0-1/input1
May 28 16:06:13 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson audit[606]: NETFILTER_CFG table=filter:9 family=2 entries=8 op=nft_register_chain pid=606 comm="iptables-restor"
May 28 16:06:13 gibson audit[606]: SYSCALL arch=c000003e syscall=46 success=yes exit=504 a0=3 a1=7ffc69e15220 a2=0 a3=7ffc69e1520c items=0 ppid=529 pid=606 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson kernel: mousedev: PS/2 mouse device common for all mice
May 28 16:06:13 gibson systemd[1]: boot.mount: Directory /boot to mount over is not empty, mounting anyway.
May 28 16:06:13 gibson systemd[1]: Mounting /boot...
May 28 16:06:13 gibson systemd[1]: Mounted /boot.
May 28 16:06:13 gibson systemd[1]: Reached target Local File Systems.
May 28 16:06:13 gibson audit[607]: NETFILTER_CFG table=filter:10 family=2 entries=22 op=nft_register_rule pid=607 comm="iptables-restor"
May 28 16:06:13 gibson audit[607]: SYSCALL arch=c000003e syscall=46 success=yes exit=10228 a0=3 a1=7fff00f82590 a2=0 a3=7fff00f8257c items=0 ppid=529 pid=607 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson systemd[1]: Starting Rebuild Dynamic Linker Cache...
May 28 16:06:13 gibson systemd[1]: Starting Set Up Additional Binary Formats...
May 28 16:06:13 gibson systemd[1]: Store a System Token in an EFI Variable was skipped because all trigger condition checks failed.
May 28 16:06:13 gibson audit[618]: NETFILTER_CFG table=filter:11 family=2 entries=3 op=nft_register_rule pid=618 comm="iptables-restor"
May 28 16:06:13 gibson audit[618]: SYSCALL arch=c000003e syscall=46 success=yes exit=628 a0=3 a1=7ffda202b540 a2=0 a3=7ffda202b52c items=0 ppid=529 pid=618 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson systemd[1]: Starting Automatic Boot Loader Update...
May 28 16:06:13 gibson systemd[1]: Commit a transient machine-id on disk was skipped because of a failed condition check (ConditionPathIsMountPoint=/etc/machine-id).
May 28 16:06:13 gibson systemd[1]: Starting Create Volatile Files and Directories...
May 28 16:06:13 gibson audit[622]: NETFILTER_CFG table=filter:12 family=10 entries=7 op=nft_register_chain pid=622 comm="ip6tables-resto"
May 28 16:06:13 gibson audit[622]: SYSCALL arch=c000003e syscall=46 success=yes exit=732 a0=3 a1=7fff115ae100 a2=0 a3=7fff115ae0ec items=0 ppid=529 pid=622 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 619 (systemd-binfmt)
May 28 16:06:13 gibson systemd[1]: Mounting Arbitrary Executable File Formats File System...
May 28 16:06:13 gibson audit[626]: NETFILTER_CFG table=filter:13 family=10 entries=36 op=nft_register_chain pid=626 comm="ip6tables-resto"
May 28 16:06:13 gibson audit[626]: SYSCALL arch=c000003e syscall=46 success=yes exit=4464 a0=3 a1=7ffe1cbcaf50 a2=0 a3=7ffe1cbcaf3c items=0 ppid=529 pid=626 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson systemd[1]: Mounted Arbitrary Executable File Formats File System.
May 28 16:06:13 gibson systemd[1]: Finished Set Up Additional Binary Formats.
May 28 16:06:13 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:13 gibson audit[629]: NETFILTER_CFG table=filter:14 family=10 entries=2 op=nft_register_rule pid=629 comm="ip6tables-resto"
May 28 16:06:13 gibson audit[629]: SYSCALL arch=c000003e syscall=46 success=yes exit=984 a0=3 a1=7ffe5987d2c0 a2=0 a3=7ffe5987d2ac items=0 ppid=529 pid=629 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson audit[632]: NETFILTER_CFG table=filter:15 family=10 entries=2 op=nft_register_chain pid=632 comm="ip6tables-resto"
May 28 16:06:13 gibson audit[632]: SYSCALL arch=c000003e syscall=46 success=yes exit=160 a0=3 a1=7fff48217a90 a2=0 a3=7fff48217a7c items=0 ppid=529 pid=632 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson audit[635]: NETFILTER_CFG table=filter:16 family=10 entries=6 op=nft_register_chain pid=635 comm="ip6tables-resto"
May 28 16:06:13 gibson audit[635]: SYSCALL arch=c000003e syscall=46 success=yes exit=780 a0=3 a1=7ffceff78b00 a2=0 a3=7ffceff78aec items=0 ppid=529 pid=635 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:13 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 16:06:13 gibson bootctl[620]: Skipping "/boot/EFI/systemd/systemd-bootx64.efi", since same boot loader version in place already.
May 28 16:06:13 gibson bootctl[620]: Skipping "/boot/EFI/BOOT/BOOTX64.EFI", since same boot loader version in place already.
May 28 16:06:13 gibson systemd[1]: Finished Automatic Boot Loader Update.
May 28 16:06:13 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-boot-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Finished Create Volatile Files and Directories.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Starting Rebuild Journal Catalog...
May 28 16:06:14 gibson audit: BPF prog-id=12 op=LOAD
May 28 16:06:14 gibson systemd[1]: Starting Network Time Synchronization...
May 28 16:06:14 gibson systemd[1]: Starting Record System Boot/Shutdown in UTMP...
May 28 16:06:14 gibson audit[642]: SYSTEM_BOOT pid=642 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Finished Record System Boot/Shutdown in UTMP.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson audit[636]: NETFILTER_CFG table=filter:17 family=10 entries=65 op=nft_register_rule pid=636 comm="ip6tables-resto"
May 28 16:06:14 gibson audit[636]: SYSCALL arch=c000003e syscall=46 success=yes exit=25484 a0=3 a1=7ffc4bcee5f0 a2=0 a3=7ffc4bcee5dc items=0 ppid=529 pid=636 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:14 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 16:06:14 gibson audit[643]: NETFILTER_CFG table=filter:18 family=10 entries=6 op=nft_register_rule pid=643 comm="ip6tables-resto"
May 28 16:06:14 gibson audit[643]: SYSCALL arch=c000003e syscall=46 success=yes exit=2496 a0=3 a1=7fffb70648e0 a2=0 a3=7fffb70648cc items=0 ppid=529 pid=643 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:14 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 16:06:14 gibson audit[646]: NETFILTER_CFG table=filter:19 family=10 entries=8 op=nft_register_chain pid=646 comm="ip6tables-resto"
May 28 16:06:14 gibson audit[646]: SYSCALL arch=c000003e syscall=46 success=yes exit=512 a0=3 a1=7ffcac6dbed0 a2=0 a3=7ffcac6dbebc items=0 ppid=529 pid=646 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:14 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 16:06:14 gibson systemd[1]: Finished Rebuild Journal Catalog.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson audit[647]: NETFILTER_CFG table=filter:20 family=10 entries=8 op=nft_register_rule pid=647 comm="ip6tables-resto"
May 28 16:06:14 gibson audit[647]: SYSCALL arch=c000003e syscall=46 success=yes exit=3144 a0=3 a1=7ffda56d9790 a2=0 a3=7ffda56d977c items=0 ppid=529 pid=647 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:14 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 16:06:14 gibson audit[650]: NETFILTER_CFG table=filter:21 family=10 entries=3 op=nft_register_rule pid=650 comm="ip6tables-resto"
May 28 16:06:14 gibson audit[650]: SYSCALL arch=c000003e syscall=46 success=yes exit=632 a0=3 a1=7fff18a824b0 a2=0 a3=7fff18a8249c items=0 ppid=529 pid=650 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:14 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 16:06:14 gibson systemd[1]: Finished CLI Netfilter Manager.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ufw comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Started Network Time Synchronization.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Finished Rebuild Dynamic Linker Cache.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Starting Update is Completed...
May 28 16:06:14 gibson systemd[1]: Finished Update is Completed.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Reached target System Initialization.
May 28 16:06:14 gibson systemd[1]: Started Daily rotation of log files.
May 28 16:06:14 gibson systemd[1]: Started Daily man-db regeneration.
May 28 16:06:14 gibson systemd[1]: Started Daily verification of password and group files.
May 28 16:06:14 gibson systemd[1]: Started Daily Cleanup of Temporary Directories.
May 28 16:06:14 gibson systemd[1]: Started Daily locate database update.
May 28 16:06:14 gibson systemd[1]: Reached target Timer Units.
May 28 16:06:14 gibson systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
May 28 16:06:14 gibson systemd[1]: Listening on D-Bus System Message Bus Socket.
May 28 16:06:14 gibson systemd[1]: Reached target Socket Units.
May 28 16:06:14 gibson systemd[1]: Reached target Basic System.
May 28 16:06:14 gibson systemd[1]: Starting Save/Restore Sound Card State...
May 28 16:06:14 gibson systemd[1]: Manage Sound Card State (restore and store) was skipped because of a failed condition check (ConditionPathExists=/etc/alsa/state-daemon.conf).
May 28 16:06:14 gibson systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
May 28 16:06:14 gibson systemd[1]: Started Periodic Command Scheduler.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cronie comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Starting D-Bus System Message Bus...
May 28 16:06:14 gibson systemd[1]: Starting IPv4 Packet Filtering Framework...
May 28 16:06:14 gibson crond[656]: (CRON) STARTUP (1.6.1)
May 28 16:06:14 gibson crond[656]: (CRON) INFO (Syslog will be used instead of sendmail.)
May 28 16:06:14 gibson crond[656]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 16% if used.)
May 28 16:06:14 gibson crond[656]: (CRON) INFO (running with inotify support)
May 28 16:06:14 gibson systemd[1]: Starting Initialize hardware monitoring sensors...
May 28 16:06:14 gibson systemd[1]: SSH Key Generation was skipped because all trigger condition checks failed.
May 28 16:06:14 gibson audit: BPF prog-id=13 op=LOAD
May 28 16:06:14 gibson audit: BPF prog-id=14 op=LOAD
May 28 16:06:14 gibson audit: BPF prog-id=15 op=LOAD
May 28 16:06:14 gibson audit[658]: NETFILTER_CFG table=filter:22 family=2 entries=114 op=nft_register_chain pid=658 comm="iptables-restor"
May 28 16:06:14 gibson audit[658]: NETFILTER_CFG table=filter:22 family=2 entries=115 op=nft_unregister_table pid=658 comm="iptables-restor"
May 28 16:06:14 gibson audit[658]: SYSCALL arch=c000003e syscall=46 success=yes exit=29052 a0=4 a1=7ffc6a71d2b0 a2=0 a3=7ffc6a71d29c items=0 ppid=1 pid=658 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:14 gibson audit: PROCTITLE proctitle=2F7573722F62696E2F69707461626C65732D726573746F7265002F6574632F69707461626C65732F69707461626C65732E72756C6573
May 28 16:06:14 gibson systemd[1]: Starting User Login Management...
May 28 16:06:14 gibson systemd[1]: Finished Save/Restore Sound Card State.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Reached target Sound Card.
May 28 16:06:14 gibson avahi-daemon[655]: Found user 'avahi' (UID 976) and group 'avahi' (GID 976).
May 28 16:06:14 gibson avahi-daemon[655]: Successfully dropped root privileges.
May 28 16:06:14 gibson avahi-daemon[655]: avahi-daemon 0.8 starting up.
May 28 16:06:14 gibson kernel: nct6775: Found NCT6795D or compatible chip at 0x4e:0xa20
May 28 16:06:14 gibson systemd[1]: Finished Initialize hardware monitoring sensors.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lm_sensors comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson audit[660]: USER_ACCT pid=660 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
May 28 16:06:14 gibson audit[660]: CRED_ACQ pid=660 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
May 28 16:06:14 gibson audit[660]: SYSCALL arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7ffedc2058f0 a2=1 a3=7ffedc205607 items=0 ppid=656 pid=660 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="crond" exe="/usr/bin/crond" key=(null)
May 28 16:06:14 gibson audit: PROCTITLE proctitle=2F7573722F62696E2F63726F6E64002D6E
May 28 16:06:14 gibson systemd-logind[661]: New seat seat0.
May 28 16:06:14 gibson crond[660]: pam_unix(crond:session): session opened for user root(uid=0) by (uid=0)
May 28 16:06:14 gibson audit[660]: USER_START pid=660 uid=0 auid=0 ses=1 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
May 28 16:06:14 gibson audit[660]: CRED_REFR pid=660 uid=0 auid=0 ses=1 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
May 28 16:06:14 gibson CROND[665]: (root) CMD (/root/qbscript)
May 28 16:06:14 gibson systemd-logind[661]: Watching system buttons on /dev/input/event1 (Power Button)
May 28 16:06:14 gibson systemd-logind[661]: Watching system buttons on /dev/input/event0 (Power Button)
May 28 16:06:14 gibson systemd-logind[661]: Watching system buttons on /dev/input/event14 (Keychron Keychron K6)
May 28 16:06:14 gibson systemd-logind[661]: Watching system buttons on /dev/input/event15 (Keychron Keychron K6)
May 28 16:06:14 gibson audit[658]: NETFILTER_CFG table=nat:23 family=2 entries=9 op=nft_register_chain pid=658 comm="iptables-restor"
May 28 16:06:14 gibson audit[658]: SYSCALL arch=c000003e syscall=46 success=yes exit=896 a0=4 a1=7ffc6a71d2b0 a2=0 a3=55db9cae63d0 items=0 ppid=1 pid=658 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:14 gibson audit: PROCTITLE proctitle=2F7573722F62696E2F69707461626C65732D726573746F7265002F6574632F69707461626C65732F69707461626C65732E72756C6573
May 28 16:06:14 gibson systemd[1]: Finished IPv4 Packet Filtering Framework.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=iptables comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Starting IPv6 Packet Filtering Framework...
May 28 16:06:14 gibson systemd[1]: Started D-Bus System Message Bus.
May 28 16:06:14 gibson avahi-daemon[655]: Successfully called chroot().
May 28 16:06:14 gibson avahi-daemon[655]: Successfully dropped remaining capabilities.
May 28 16:06:14 gibson avahi-daemon[655]: No service file found in /etc/avahi/services.
May 28 16:06:14 gibson audit[681]: NETFILTER_CFG table=filter:24 family=10 entries=7 op=nft_register_chain pid=681 comm="ip6tables-resto"
May 28 16:06:14 gibson audit[681]: NETFILTER_CFG table=filter:24 family=10 entries=140 op=nft_unregister_table pid=681 comm="ip6tables-resto"
May 28 16:06:14 gibson audit[681]: SYSCALL arch=c000003e syscall=46 success=yes exit=764 a0=4 a1=7ffdd14a94c0 a2=0 a3=7ffdd14a94ac items=0 ppid=1 pid=681 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 16:06:14 gibson audit: PROCTITLE proctitle=2F7573722F62696E2F6970367461626C65732D726573746F7265002F6574632F69707461626C65732F6970367461626C65732E72756C6573
May 28 16:06:14 gibson avahi-daemon[655]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
May 28 16:06:14 gibson avahi-daemon[655]: New relevant interface lo.IPv6 for mDNS.
May 28 16:06:14 gibson avahi-daemon[655]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
May 28 16:06:14 gibson avahi-daemon[655]: New relevant interface lo.IPv4 for mDNS.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson avahi-daemon[655]: Network interface enumeration completed.
May 28 16:06:14 gibson avahi-daemon[655]: Registering new address record for ::1 on lo.*.
May 28 16:06:14 gibson avahi-daemon[655]: Registering new address record for 127.0.0.1 on lo.IPv4.
May 28 16:06:14 gibson systemd[1]: Finished IPv6 Packet Filtering Framework.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ip6tables comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Reached target Preparation for Network.
May 28 16:06:14 gibson dbus-daemon[657]: [system] Successfully activated service 'org.freedesktop.systemd1'
May 28 16:06:14 gibson systemd[1]: Starting Network Manager...
May 28 16:06:14 gibson systemd[1]: Started Avahi mDNS/DNS-SD Stack.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=avahi-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Started User Login Management.
May 28 16:06:14 gibson systemd[1]: Found device Portable 1.
May 28 16:06:14 gibson systemd[1]: Starting File System Check on /dev/disk/by-uuid/c9de160f-65d2-43d6-a744-59e2f3e1b115...
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.1555] NetworkManager (version 1.38.0-1) is starting... (for the first time)
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.1555] Read config: /etc/NetworkManager/NetworkManager.conf (lib: 20-connectivity.conf)
May 28 16:06:14 gibson systemd[1]: Started Network Manager.
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.1582] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Reached target Network.
May 28 16:06:14 gibson systemd[1]: Starting Network Manager Wait Online...
May 28 16:06:14 gibson systemd[1]: Starting Network Time Service...
May 28 16:06:14 gibson systemd[1]: Started PyMedusa Daemon.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pymedusa comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Started OpenSSH Daemon.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Starting Permit User Sessions...
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.1656] manager[0x562d986a7020]: monitoring kernel firmware directory '/lib/firmware'.
May 28 16:06:14 gibson systemd[1]: Finished Permit User Sessions.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Started Getty on tty1.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Reached target Login Prompts.
May 28 16:06:14 gibson dbus-daemon[657]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.4' (uid=0 pid=682 comm="/usr/bin/NetworkManager --no-daemon")
May 28 16:06:14 gibson audit: BPF prog-id=16 op=LOAD
May 28 16:06:14 gibson audit: BPF prog-id=17 op=LOAD
May 28 16:06:14 gibson audit: BPF prog-id=18 op=LOAD
May 28 16:06:14 gibson systemd[1]: Starting Hostname Service...
May 28 16:06:14 gibson ntpd[688]: ntpd 4.2.8p15@1.3728-o Wed Jul 1 17:02:17 UTC 2020 (1): Starting
May 28 16:06:14 gibson ntpd[688]: Command line: /usr/bin/ntpd -g -u ntp:ntp
May 28 16:06:14 gibson ntpd[688]: ----------------------------------------------------
May 28 16:06:14 gibson ntpd[688]: ntp-4 is maintained by Network Time Foundation,
May 28 16:06:14 gibson ntpd[688]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
May 28 16:06:14 gibson ntpd[688]: corporation. Support and training for ntp-4 are
May 28 16:06:14 gibson ntpd[688]: available at https://www.nwtime.org/support
May 28 16:06:14 gibson ntpd[688]: ----------------------------------------------------
May 28 16:06:14 gibson sshd[690]: Server listening on 0.0.0.0 port 22.
May 28 16:06:14 gibson dbus-daemon[657]: [system] Successfully activated service 'org.freedesktop.hostname1'
May 28 16:06:14 gibson systemd[1]: Started Hostname Service.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.1963] hostname: hostname: using hostnamed
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.1963] hostname: static hostname changed from (none) to "gibson"
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.1970] dns-mgr[0x562d986872a0]: init: dns=default,systemd-resolved rc-manager=symlink
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.1975] manager[0x562d986a7020]: rfkill: Wi-Fi hardware radio set enabled
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.1975] manager[0x562d986a7020]: rfkill: WWAN hardware radio set enabled
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2016] Loaded device plugin: NMOvsFactory (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-ovs.so)
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2020] Loaded device plugin: NMAtmManager (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-adsl.so)
May 28 16:06:14 gibson ntpd[700]: proto: precision = 0.040 usec (-24)
May 28 16:06:14 gibson ntpd[700]: basedate set to 2020-06-19
May 28 16:06:14 gibson ntpd[700]: gps base set to 2020-06-21 (week 2111)
May 28 16:06:14 gibson ntpd[700]: Listen and drop on 0 v6wildcard [::]:123
May 28 16:06:14 gibson ntpd[700]: Listen and drop on 1 v4wildcard 0.0.0.0:123
May 28 16:06:14 gibson ntpd[700]: Listen normally on 2 lo 127.0.0.1:123
May 28 16:06:14 gibson ntpd[700]: Listen normally on 3 lo [::1]:123
May 28 16:06:14 gibson ntpd[700]: Listening on routing socket on fd #20 for interface updates
May 28 16:06:14 gibson ntpd[700]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
May 28 16:06:14 gibson ntpd[700]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
May 28 16:06:14 gibson systemd[1]: Started Network Time Service.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ntpd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2135] Loaded device plugin: NMTeamFactory (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-team.so)
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2172] Loaded device plugin: NMWwanFactory (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-wwan.so)
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2184] Loaded device plugin: NMBluezManager (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-bluetooth.so)
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2198] Loaded device plugin: NMWifiFactory (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-wifi.so)
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2199] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2200] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2200] manager: Networking is enabled by state file
May 28 16:06:14 gibson dbus-daemon[657]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.4' (uid=0 pid=682 comm="/usr/bin/NetworkManager --no-daemon")
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2207] settings: Loaded settings plugin: keyfile (internal)
May 28 16:06:14 gibson systemd[1]: Starting Network Manager Script Dispatcher Service...
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2226] dhcp-init: Using DHCP client 'internal'
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2226] device (lo): carrier: link connected
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2227] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/1)
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2234] manager: (enp37s0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.2235] device (enp37s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
May 28 16:06:14 gibson dbus-daemon[657]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
May 28 16:06:14 gibson systemd[1]: Started Network Manager Script Dispatcher Service.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson kernel: Generic FE-GE Realtek PHY r8169-0-2500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-2500:00, irq=MAC)
May 28 16:06:14 gibson systemd-fsck[692]: /dev/sdd1: clean, 2438/61054976 files, 41193954/244190385 blocks
May 28 16:06:14 gibson systemd[1]: Finished File System Check on /dev/disk/by-uuid/c9de160f-65d2-43d6-a744-59e2f3e1b115.
May 28 16:06:14 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-c9de160f\x2d65d2\x2d43d6\x2da744\x2d59e2f3e1b115 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:14 gibson systemd[1]: Mounting /run/timeshift/backup...
May 28 16:06:14 gibson kernel: EXT4-fs (sdd1): mounted filesystem with ordered data mode. Quota mode: none.
May 28 16:06:14 gibson systemd[1]: Mounted /run/timeshift/backup.
May 28 16:06:14 gibson kernel: r8169 0000:25:00.0 enp37s0: Link is Down
May 28 16:06:14 gibson NetworkManager[682]: <info> [1653779174.4254] ovsdb: disconnected from ovsdb
May 28 16:06:14 gibson avahi-daemon[655]: Server startup complete. Host name is gibson.local. Local service cookie is 817495004.
May 28 16:06:15 gibson kernel: Bluetooth: hci0: Intel BT fw patch 0x43 completed & activated
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3566] device (enp37s0): carrier: link connected
May 28 16:06:17 gibson kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp37s0: link becomes ready
May 28 16:06:17 gibson kernel: r8169 0000:25:00.0 enp37s0: Link is Up - 1Gbps/Full - flow control rx/tx
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3568] device (enp37s0): state change: unavailable -> disconnected (reason 'carrier-changed', sys-iface-state: 'managed')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3572] policy: auto-activating connection 'Wired connection 1' (e0c7eed2-4613-3dd6-8345-f113f2980122)
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3576] device (enp37s0): Activation: starting connection 'Wired connection 1' (e0c7eed2-4613-3dd6-8345-f113f2980122)
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3577] device (enp37s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3579] manager: NetworkManager state is now CONNECTING
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3580] device (enp37s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3585] device (enp37s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3588] dhcp4 (enp37s0): activation: beginning transaction (timeout in 45 seconds)
May 28 16:06:17 gibson avahi-daemon[655]: Joining mDNS multicast group on interface enp37s0.IPv6 with address fe80::6cd9:d662:2:2a59.
May 28 16:06:17 gibson avahi-daemon[655]: New relevant interface enp37s0.IPv6 for mDNS.
May 28 16:06:17 gibson avahi-daemon[655]: Registering new address record for fe80::6cd9:d662:2:2a59 on enp37s0.*.
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3820] dhcp4 (enp37s0): state changed new lease, address=192.168.0.10
May 28 16:06:17 gibson avahi-daemon[655]: Joining mDNS multicast group on interface enp37s0.IPv4 with address 192.168.0.10.
May 28 16:06:17 gibson avahi-daemon[655]: New relevant interface enp37s0.IPv4 for mDNS.
May 28 16:06:17 gibson avahi-daemon[655]: Registering new address record for 192.168.0.10 on enp37s0.IPv4.
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3830] device (enp37s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3843] device (enp37s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3844] device (enp37s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3847] manager: NetworkManager state is now CONNECTED_LOCAL
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3851] manager: NetworkManager state is now CONNECTED_SITE
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3852] policy: set 'Wired connection 1' (enp37s0) as default for IPv4 routing and DNS
May 28 16:06:17 gibson dbus-daemon[657]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.4' (uid=0 pid=682 comm="/usr/bin/NetworkManager --no-daemon")
May 28 16:06:17 gibson dbus-daemon[657]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3892] device (enp37s0): Activation: successful, device activated.
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3896] manager: NetworkManager state is now CONNECTED_GLOBAL
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.3898] manager: startup complete
May 28 16:06:17 gibson systemd[1]: Finished Network Manager Wait Online.
May 28 16:06:17 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:17 gibson kernel: kauditd_printk_skb: 110 callbacks suppressed
May 28 16:06:17 gibson kernel: audit: type=1130 audit(1653779177.390:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:17 gibson systemd[1]: Reached target Network is Online.
May 28 16:06:17 gibson systemd[1]: Started Mullvad VPN daemon.
May 28 16:06:17 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mullvad-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:17 gibson kernel: audit: type=1130 audit(1653779177.392:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mullvad-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:17 gibson systemd[1]: Started Plex Media Server.
May 28 16:06:17 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plexmediaserver comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:17 gibson kernel: audit: type=1130 audit(1653779177.396:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plexmediaserver comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:17 gibson systemd[1]: Started qBittorrent-nox service.
May 28 16:06:17 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=qbittorrent-nox comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:17 gibson systemd[1]: Reached target Multi-User System.
May 28 16:06:17 gibson systemd[1]: Reached target Graphical Interface.
May 28 16:06:17 gibson kernel: audit: type=1130 audit(1653779177.397:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=qbittorrent-nox comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon::version][INFO] Starting mullvad-daemon - 2022.1 2022-03-01
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon][INFO] Logging to /var/log/mullvad-vpn
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon::rpc_uniqueness_check][DEBUG] Failed to locate/connect to another daemon instance, assuming there isn't one
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon][INFO] Management interface listening on /var/run/mullvad-vpn
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon::settings][INFO] Loading settings from /etc/mullvad-vpn/settings.json
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon][INFO] Automatically connecting since auto-connect is turned on
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_rpc::address_cache][DEBUG] Loading API addresses from /var/cache/mullvad-vpn/api-ip-address.txt
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_rpc::address_cache][DEBUG] Using API address: 91.90.44.10:444
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_rpc::availability][DEBUG] Suspending API requests
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_rpc::availability][DEBUG] Resuming API requests due to coming online
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon::relays][DEBUG] Reading relays from /var/cache/mullvad-vpn/relays.json
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon::relays][DEBUG] Reading relays from /opt/mullvad-vpn-cli/relays.json
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon::relays][INFO] Initialized with 841 cached relays from 2022-05-23 21:23:51.528
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon::version_check][DEBUG] Loading version check cache from /var/cache/mullvad-vpn/version-info.json
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon::account_history][INFO] Opening account history file in /etc/mullvad-vpn/account-history.json
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_rpc::availability][DEBUG] Pausing background API requests
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon][INFO] Account already has WireGuard key
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon::wireguard][DEBUG] Starting automatic key rotation job
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_rpc::availability][DEBUG] Unsuspending API requests
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_rpc::availability][DEBUG] Resuming background API requests
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon::relays][INFO] Selected relay us182-wireguard at 198.54.131.162
May 28 16:06:17 gibson mullvad-daemon[732]: [talpid_core::firewall][INFO] Applying firewall policy: Connecting to 198.54.131.162:48279 over UDP, Allowing LAN, interface: none
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle6:25 family=10 entries=5 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle6:25 family=10 entries=2 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle4:25 family=2 entries=5 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle4:25 family=2 entries=2 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvad:25 family=1 entries=82 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvad:25 family=1 entries=2 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[732]: SYSCALL arch=c000003e syscall=44 success=yes exit=37500 a0=10 a1=7fe658004320 a2=927c a3=0 items=0 ppid=1 pid=732 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="tokio-runtime-w" exe="/opt/mullvad-vpn-cli/mullvad-daemon" key=(null)
May 28 16:06:17 gibson audit: PROCTITLE proctitle=2F6F70742F6D756C6C7661642D76706E2D636C692F6D756C6C7661642D6461656D6F6E002D76002D2D64697361626C652D7374646F75742D74696D657374616D7073
May 28 16:06:17 gibson kernel: audit: type=1325 audit(1653779177.506:75): table=mullvadmangle6:25 family=10 entries=5 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson kernel: audit: type=1325 audit(1653779177.506:75): table=mullvadmangle6:25 family=10 entries=2 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson kernel: audit: type=1325 audit(1653779177.506:75): table=mullvadmangle4:25 family=2 entries=5 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson kernel: audit: type=1325 audit(1653779177.506:75): table=mullvadmangle4:25 family=2 entries=2 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson kernel: audit: type=1325 audit(1653779177.506:75): table=mullvad:25 family=1 entries=82 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson kernel: audit: type=1325 audit(1653779177.506:75): table=mullvad:25 family=1 entries=2 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson dbus-daemon[657]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.8' (uid=0 pid=732 comm="/opt/mullvad-vpn-cli/mullvad-daemon -v --disable-s")
May 28 16:06:17 gibson dbus-daemon[657]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
May 28 16:06:17 gibson kernel: wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
May 28 16:06:17 gibson kernel: wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
May 28 16:06:17 gibson mullvad-daemon[732]: [talpid_core::tunnel::wireguard][DEBUG] Using kernel WireGuard implementation
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.6236] manager: (wg-mullvad): new WireGuard device (/org/freedesktop/NetworkManager/Devices/3)
May 28 16:06:17 gibson mullvad-daemon[732]: [talpid_core::firewall][INFO] Applying firewall policy: Connecting to 198.54.131.162:48279 over UDP over "wg-mullvad" (ip: 10.106.84.10, v4 gw: 10.64.0.1, v6 gw: None), Allowing LAN
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon][DEBUG] New tunnel state: Connecting { endpoint: TunnelEndpoint { endpoint: Endpoint { address: 198.54.131.162:48279, protocol: Udp }, tunnel_type: Wireguard, proxy: None, entry_endpoint: None }, location: Some(GeoIpLocation { ipv4: None, ipv6: None, country: "USA", city: Some("Seattle, WA"), latitude: 47.608013, longitude: -122.335167, mullvad_exit_ip: true, hostname: Some("us182-wireguard"), bridge_hostname: None, entry_hostname: None }) }
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle6:26 family=10 entries=5 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle6:26 family=10 entries=5 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle4:26 family=2 entries=5 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle4:26 family=2 entries=5 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvad:26 family=1 entries=87 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvad:26 family=1 entries=82 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[732]: SYSCALL arch=c000003e syscall=44 success=yes exit=38620 a0=13 a1=7fe6580375d0 a2=96dc a3=0 items=0 ppid=1 pid=732 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="tokio-runtime-w" exe="/opt/mullvad-vpn-cli/mullvad-daemon" key=(null)
May 28 16:06:17 gibson audit: PROCTITLE proctitle=2F6F70742F6D756C6C7661642D76706E2D636C692F6D756C6C7661642D6461656D6F6E002D76002D2D64697361626C652D7374646F75742D74696D657374616D7073
May 28 16:06:17 gibson mullvad-daemon[732]: [talpid_core::routing::imp::imp][DEBUG] Adding routes: {RequiredRoute { prefix: V4(Ipv4Network { addr: 0.0.0.0, prefix: 0 }), node: RealNode(Node { ip: None, device: Some("wg-mullvad") }), table_id: 1836018789 }, RequiredRoute { prefix: V4(Ipv4Network { addr: 10.64.0.1, prefix: 32 }), node: RealNode(Node { ip: None, device: Some("wg-mullvad") }), table_id: 254 }}
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.6269] device (wg-mullvad): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.6272] device (wg-mullvad): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.6275] device (wg-mullvad): Activation: starting connection 'wg-mullvad' (fd030c33-d68a-4007-a5ec-6a45c73653dd)
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.6275] device (wg-mullvad): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.6277] device (wg-mullvad): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.6278] device (wg-mullvad): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.6278] device (wg-mullvad): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.6287] device (wg-mullvad): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.6288] device (wg-mullvad): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
May 28 16:06:17 gibson NetworkManager[682]: <info> [1653779177.6291] device (wg-mullvad): Activation: successful, device activated.
May 28 16:06:17 gibson mullvad-daemon[732]: [talpid_core::firewall][INFO] Applying firewall policy: Connected to 198.54.131.162:48279 over UDP over "wg-mullvad" (ip: 10.106.84.10, v4 gw: 10.64.0.1, v6 gw: None), Allowing LAN
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle6:27 family=10 entries=6 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle6:27 family=10 entries=5 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle4:27 family=2 entries=8 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvadmangle4:27 family=2 entries=5 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvad:27 family=1 entries=90 op=nft_register_chain pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[745]: NETFILTER_CFG table=mullvad:27 family=1 entries=87 op=nft_unregister_table pid=745 comm="tokio-runtime-w"
May 28 16:06:17 gibson audit[732]: SYSCALL arch=c000003e syscall=44 success=yes exit=41244 a0=13 a1=7fe6580375d0 a2=a11c a3=0 items=0 ppid=1 pid=732 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="tokio-runtime-w" exe="/opt/mullvad-vpn-cli/mullvad-daemon" key=(null)
May 28 16:06:17 gibson audit: PROCTITLE proctitle=2F6F70742F6D756C6C7661642D76706E2D636C692F6D756C6C7661642D6461656D6F6E002D76002D2D64697361626C652D7374646F75742D74696D657374616D7073
May 28 16:06:17 gibson mullvad-daemon[732]: [talpid_core::dns][INFO] Setting DNS servers to 10.64.0.1
May 28 16:06:17 gibson dbus-daemon[657]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.8' (uid=0 pid=732 comm="/opt/mullvad-vpn-cli/mullvad-daemon -v --disable-s")
May 28 16:06:17 gibson dbus-daemon[657]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
May 28 16:06:17 gibson mullvad-daemon[732]: [talpid_core::dns::imp::static_resolv_conf][DEBUG] No DNS state backup to restore
May 28 16:06:17 gibson mullvad-daemon[732]: [talpid_core::dns::imp][DEBUG] Managing DNS via /etc/resolv.conf
May 28 16:06:17 gibson mullvad-daemon[732]: [mullvad_daemon][DEBUG] New tunnel state: Connected { endpoint: TunnelEndpoint { endpoint: Endpoint { address: 198.54.131.162:48279, protocol: Udp }, tunnel_type: Wireguard, proxy: None, entry_endpoint: None }, location: Some(GeoIpLocation { ipv4: None, ipv6: None, country: "USA", city: Some("Seattle, WA"), latitude: 47.608013, longitude: -122.335167, mullvad_exit_ip: true, hostname: Some("us182-wireguard"), bridge_hostname: None, entry_hostname: None }) }
May 28 16:06:18 gibson systemd[1]: Stopping qBittorrent-nox service...
May 28 16:06:18 gibson qbittorrent-nox[734]: Catching signal: SIGTERM
May 28 16:06:18 gibson qbittorrent-nox[734]: Exiting cleanly
May 28 16:06:18 gibson qbittorrent-nox[734]: ******** Information ********
May 28 16:06:18 gibson qbittorrent-nox[734]: To control qBittorrent, access the WebUI at: https://localhost:9999
May 28 16:06:18 gibson systemd[1]: systemd-rfkill.service: Deactivated successfully.
May 28 16:06:18 gibson audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:18 gibson kernel: [UFW BLOCK] IN=wg-mullvad OUT= MAC= SRC=10.106.84.10 DST=239.0.0.250 LEN=273 TOS=0x00 PREC=0x00 TTL=1 ID=49693 DF PROTO=UDP SPT=32414 DPT=32415 LEN=253
May 28 16:06:18 gibson kernel: [UFW BLOCK] IN=wg-mullvad OUT= MAC= SRC=10.106.84.10 DST=239.255.255.250 LEN=273 TOS=0x00 PREC=0x00 TTL=1 ID=57380 DF PROTO=UDP SPT=32410 DPT=32411 LEN=253
May 28 16:06:19 gibson NetworkManager[682]: <info> [1653779179.0057] dhcp6 (enp37s0): activation: beginning transaction (timeout in 45 seconds)
May 28 16:06:19 gibson avahi-daemon[655]: Leaving mDNS multicast group on interface enp37s0.IPv6 with address fe80::6cd9:d662:2:2a59.
May 28 16:06:19 gibson avahi-daemon[655]: Joining mDNS multicast group on interface enp37s0.IPv6 with address fd00:bc3e:70e:88c2:8ef2:6e19:94a0:3ff7.
May 28 16:06:19 gibson avahi-daemon[655]: Registering new address record for fd00:bc3e:70e:88c2:8ef2:6e19:94a0:3ff7 on enp37s0.*.
May 28 16:06:19 gibson avahi-daemon[655]: Withdrawing address record for fe80::6cd9:d662:2:2a59 on enp37s0.
May 28 16:06:19 gibson kernel: [UFW BLOCK] IN=wg-mullvad OUT= MAC= SRC=10.106.84.10 DST=239.0.0.250 LEN=282 TOS=0x00 PREC=0x00 TTL=1 ID=49759 DF PROTO=UDP SPT=32414 DPT=32415 LEN=262
May 28 16:06:19 gibson kernel: [UFW BLOCK] IN=wg-mullvad OUT= MAC= SRC=78.60.57.102 DST=10.106.84.10 LEN=131 TOS=0x08 PREC=0x20 TTL=105 ID=33809 PROTO=UDP SPT=33318 DPT=44335 LEN=111
May 28 16:06:20 gibson systemd[1]: qbittorrent-nox.service: Deactivated successfully.
May 28 16:06:20 gibson systemd[1]: Stopped qBittorrent-nox service.
May 28 16:06:20 gibson audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=qbittorrent-nox comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:21 gibson ntpd[700]: Listen normally on 4 enp37s0 192.168.0.10:123
May 28 16:06:21 gibson ntpd[700]: Listen normally on 5 wg-mullvad 10.106.84.10:123
May 28 16:06:21 gibson ntpd[700]: Listen normally on 6 enp37s0 [fd00:bc3e:70e:88c2:8ef2:6e19:94a0:3ff7]:123
May 28 16:06:21 gibson ntpd[700]: Listen normally on 7 enp37s0 [fe80::6cd9:d662:2:2a59%2]:123
May 28 16:06:21 gibson ntpd[700]: new interface(s) found: waking up resolver
May 28 16:06:21 gibson systemd[1]: Started qBittorrent-nox service.
May 28 16:06:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=qbittorrent-nox comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:22 gibson mullvad-daemon[732]: [mullvad_rpc::availability][DEBUG] Resuming background API requests
May 28 16:06:24 gibson systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
May 28 16:06:24 gibson kernel: kauditd_printk_skb: 21 callbacks suppressed
May 28 16:06:24 gibson kernel: audit: type=1131 audit(1653779184.232:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:24 gibson audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:26 gibson dbus-daemon[657]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.9' (uid=0 pid=942 comm="sshd: chris [priv] ")
May 28 16:06:26 gibson audit[942]: USER_ACCT pid=942 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 16:06:26 gibson dbus-daemon[657]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
May 28 16:06:26 gibson sshd[942]: pam_systemd_home(sshd:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
May 28 16:06:26 gibson kernel: audit: type=1101 audit(1653779186.961:82): pid=942 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 16:06:26 gibson sshd[942]: Accepted publickey for chris from 192.168.0.14 port 44104 ssh2: RSA SHA256:8K2VKWakmNra0L5TnaHbmckHFer+sNWvYRj8txNuHYc
May 28 16:06:26 gibson audit[942]: CRED_ACQ pid=942 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 16:06:26 gibson audit[942]: SYSCALL arch=c000003e syscall=1 success=yes exit=4 a0=3 a1=7ffe75190c00 a2=4 a3=7ffe75190914 items=0 ppid=690 pid=942 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="sshd" exe="/usr/bin/sshd" key=(null)
May 28 16:06:26 gibson audit: PROCTITLE proctitle=737368643A206368726973205B707269765D
May 28 16:06:26 gibson kernel: audit: type=1103 audit(1653779186.962:83): pid=942 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 16:06:26 gibson kernel: audit: type=1006 audit(1653779186.962:84): pid=942 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
May 28 16:06:26 gibson kernel: audit: type=1300 audit(1653779186.962:84): arch=c000003e syscall=1 success=yes exit=4 a0=3 a1=7ffe75190c00 a2=4 a3=7ffe75190914 items=0 ppid=690 pid=942 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="sshd" exe="/usr/bin/sshd" key=(null)
May 28 16:06:26 gibson kernel: audit: type=1327 audit(1653779186.962:84): proctitle=737368643A206368726973205B707269765D
May 28 16:06:26 gibson sshd[942]: pam_unix(sshd:session): session opened for user chris(uid=1000) by (uid=0)
May 28 16:06:26 gibson systemd[1]: Created slice User Slice of UID 1000.
May 28 16:06:26 gibson systemd[1]: Starting User Runtime Directory /run/user/1000...
May 28 16:06:26 gibson systemd-logind[661]: New session 2 of user chris.
May 28 16:06:26 gibson systemd[1]: Finished User Runtime Directory /run/user/1000.
May 28 16:06:26 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:26 gibson systemd[1]: Starting User Manager for UID 1000...
May 28 16:06:26 gibson kernel: audit: type=1130 audit(1653779186.974:85): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:26 gibson dbus-daemon[657]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.11' (uid=0 pid=945 comm="(systemd)")
May 28 16:06:26 gibson dbus-daemon[657]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
May 28 16:06:26 gibson systemd[945]: pam_systemd_home(systemd-user:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
May 28 16:06:26 gibson audit[945]: USER_ACCT pid=945 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:26 gibson audit[945]: CRED_ACQ pid=945 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
May 28 16:06:26 gibson audit[945]: SYSCALL arch=c000003e syscall=1 success=yes exit=4 a0=9 a1=7ffeecff1390 a2=4 a3=7ffeecff10a4 items=0 ppid=1 pid=945 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null)
May 28 16:06:26 gibson audit: PROCTITLE proctitle="(systemd)"
May 28 16:06:26 gibson systemd[945]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8002 service=[systemd-user] terminal=[] user=[chris] ruser=[<unknown>] rhost=[<unknown>]
May 28 16:06:26 gibson kernel: audit: type=1101 audit(1653779186.979:86): pid=945 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:26 gibson kernel: audit: type=1103 audit(1653779186.979:87): pid=945 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
May 28 16:06:26 gibson kernel: audit: type=1006 audit(1653779186.979:88): pid=945 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
May 28 16:06:26 gibson systemd[945]: pam_unix(systemd-user:session): session opened for user chris(uid=1000) by (uid=0)
May 28 16:06:26 gibson systemd[945]: pam_env(systemd-user:session): deprecated reading of user environment enabled
May 28 16:06:26 gibson audit[945]: USER_START pid=945 uid=0 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_systemd_home,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:27 gibson systemd[945]: Queued start job for default target Main User Target.
May 28 16:06:27 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 16:06:27 gibson audit[942]: USER_START pid=942 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_systemd_home,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 16:06:27 gibson audit[954]: CRED_ACQ pid=954 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 16:06:27 gibson sshd[942]: pam_env(sshd:session): deprecated reading of user environment enabled
May 28 16:06:27 gibson systemd[945]: Created slice User Application Slice.
May 28 16:06:27 gibson systemd[945]: Reached target Paths.
May 28 16:06:27 gibson systemd[945]: Reached target Timers.
May 28 16:06:27 gibson systemd[945]: Starting D-Bus User Message Bus Socket...
May 28 16:06:27 gibson systemd[945]: Listening on GnuPG network certificate management daemon.
May 28 16:06:27 gibson systemd[945]: Listening on GCR ssh-agent wrapper.
May 28 16:06:27 gibson systemd[945]: Listening on GNOME Keyring daemon.
May 28 16:06:27 gibson systemd[945]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
May 28 16:06:27 gibson systemd[945]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
May 28 16:06:27 gibson systemd[945]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
May 28 16:06:27 gibson systemd[945]: Listening on GnuPG cryptographic agent and passphrase cache.
May 28 16:06:27 gibson systemd[945]: Listening on p11-kit server.
May 28 16:06:27 gibson systemd[945]: Listening on Sound System.
May 28 16:06:27 gibson systemd[945]: Listening on D-Bus User Message Bus Socket.
May 28 16:06:27 gibson systemd[945]: Reached target Sockets.
May 28 16:06:27 gibson systemd[945]: Reached target Basic System.
May 28 16:06:27 gibson systemd[1]: Started User Manager for UID 1000.
May 28 16:06:27 gibson systemd[945]: Starting gamemoded...
May 28 16:06:27 gibson systemd[945]: Starting Update XDG user dir configuration...
May 28 16:06:27 gibson systemd[1]: Started Session 2 of User chris.
May 28 16:06:27 gibson systemd[945]: Created slice User Core Session Slice.
May 28 16:06:27 gibson systemd[945]: Starting D-Bus User Message Bus...
May 28 16:06:27 gibson systemd[945]: Finished Update XDG user dir configuration.
May 28 16:06:27 gibson systemd[945]: Started D-Bus User Message Bus.
May 28 16:06:27 gibson systemd[945]: Started gamemoded.
May 28 16:06:27 gibson systemd[945]: Reached target Main User Target.
May 28 16:06:27 gibson systemd[945]: Startup finished in 107ms.I note that there is no reference to raid or mdadm at all.
Booting with linux-zen-5.17.9
May 28 15:58:20 gibson kernel: Linux version 5.17.9-zen1-1-zen (linux-zen@archlinux) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 ZEN SMP PREEMPT Wed, 18 May 2022 17:58:27 +0000
May 28 15:58:20 gibson kernel: Command line: initrd=\amd-ucode.img initrd=\initramfs-linux-zen.img root=PARTUUID="40f60eaa-ca30-8b47-95f9-00bd322c3817" rw quiet splash
May 28 15:58:20 gibson kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
May 28 15:58:20 gibson kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
May 28 15:58:20 gibson kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
May 28 15:58:20 gibson kernel: x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
May 28 15:58:20 gibson kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
May 28 15:58:20 gibson kernel: signal: max sigframe size: 1776
May 28 15:58:20 gibson kernel: BIOS-provided physical RAM map:
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x000000000a20c000-0x000000000affffff] usable
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x000000000b020000-0x00000000dbd57fff] usable
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x00000000dbd58000-0x00000000dbea1fff] reserved
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x00000000dbea2000-0x00000000dc022fff] usable
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x00000000dc023000-0x00000000dc434fff] ACPI NVS
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x00000000dc435000-0x00000000dd05cfff] reserved
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x00000000dd05d000-0x00000000deffffff] usable
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
May 28 15:58:20 gibson kernel: BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
May 28 15:58:20 gibson kernel: NX (Execute Disable) protection: active
May 28 15:58:20 gibson kernel: e820: update [mem 0xd82cb018-0xd82d9057] usable ==> usable
May 28 15:58:20 gibson kernel: e820: update [mem 0xd82cb018-0xd82d9057] usable ==> usable
May 28 15:58:20 gibson kernel: e820: update [mem 0xd820d018-0xd822d057] usable ==> usable
May 28 15:58:20 gibson kernel: e820: update [mem 0xd820d018-0xd822d057] usable ==> usable
May 28 15:58:20 gibson kernel: extended physical RAM map:
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x0000000000100000-0x0000000009d7ffff] usable
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x000000000a20c000-0x000000000affffff] usable
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x000000000b020000-0x00000000d820d017] usable
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000d820d018-0x00000000d822d057] usable
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000d822d058-0x00000000d82cb017] usable
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000d82cb018-0x00000000d82d9057] usable
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000d82d9058-0x00000000dbd57fff] usable
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000dbd58000-0x00000000dbea1fff] reserved
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000dbea2000-0x00000000dc022fff] usable
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000dc023000-0x00000000dc434fff] ACPI NVS
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000dc435000-0x00000000dd05cfff] reserved
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000dd05d000-0x00000000deffffff] usable
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
May 28 15:58:20 gibson kernel: reserve setup_data: [mem 0x0000000100000000-0x000000041f37ffff] usable
May 28 15:58:20 gibson kernel: efi: EFI v2.70 by American Megatrends
May 28 15:58:20 gibson kernel: efi: ACPI 2.0=0xdc3b2000 ACPI=0xdc3b2000 SMBIOS=0xdcea8000 MEMATTR=0xd82db298 ESRT=0xd8442f98 RNG=0xdcec2d98
May 28 15:58:20 gibson kernel: efi: seeding entropy pool
May 28 15:58:20 gibson kernel: random: fast init done
May 28 15:58:20 gibson kernel: SMBIOS 2.8 present.
May 28 15:58:20 gibson kernel: DMI: Micro-Star International Co., Ltd. MS-7A40/B450I GAMING PLUS AC (MS-7A40), BIOS A.B0 11/12/2019
May 28 15:58:20 gibson kernel: tsc: Fast TSC calibration failed
May 28 15:58:20 gibson kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
May 28 15:58:20 gibson kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
May 28 15:58:20 gibson kernel: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
May 28 15:58:20 gibson kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
May 28 15:58:20 gibson kernel: total RAM covered: 3583M
May 28 15:58:20 gibson kernel: Found optimal setting for mtrr clean up
May 28 15:58:20 gibson kernel: gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
May 28 15:58:20 gibson kernel: e820: update [mem 0xdc7d0000-0xdc7dffff] usable ==> reserved
May 28 15:58:20 gibson kernel: e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
May 28 15:58:20 gibson kernel: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
May 28 15:58:20 gibson kernel: esrt: Reserving ESRT space from 0x00000000d8442f98 to 0x00000000d8442fd0.
May 28 15:58:20 gibson kernel: e820: update [mem 0xd8442000-0xd8442fff] usable ==> reserved
May 28 15:58:20 gibson kernel: Using GB pages for direct mapping
May 28 15:58:20 gibson kernel: Secure boot disabled
May 28 15:58:20 gibson kernel: RAMDISK: [mem 0x7f764000-0x7fff2fff]
May 28 15:58:20 gibson kernel: ACPI: Early table checksum verification disabled
May 28 15:58:20 gibson kernel: ACPI: RSDP 0x00000000DC3B2000 000024 (v02 ALASKA)
May 28 15:58:20 gibson kernel: ACPI: XSDT 0x00000000DC3B20A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
May 28 15:58:20 gibson kernel: ACPI: FACP 0x00000000DC3B9A68 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
May 28 15:58:20 gibson kernel: ACPI: DSDT 0x00000000DC3B21F0 007876 (v02 ALASKA A M I 01072009 INTL 20120913)
May 28 15:58:20 gibson kernel: ACPI: FACS 0x00000000DC41EE00 000040
May 28 15:58:20 gibson kernel: ACPI: APIC 0x00000000DC3B9B80 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
May 28 15:58:20 gibson kernel: ACPI: FPDT 0x00000000DC3B9CE0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
May 28 15:58:20 gibson kernel: ACPI: FIDT 0x00000000DC3B9D28 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
May 28 15:58:20 gibson kernel: ACPI: SSDT 0x00000000DC3B9DC8 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
May 28 15:58:20 gibson kernel: ACPI: SSDT 0x00000000DC3B9E90 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
May 28 15:58:20 gibson kernel: ACPI: SSDT 0x00000000DC3C2B28 00366B (v01 AMD AMD AOD 00000001 INTL 20120913)
May 28 15:58:20 gibson kernel: ACPI: MCFG 0x00000000DC3C6198 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
May 28 15:58:20 gibson kernel: ACPI: HPET 0x00000000DC3C61D8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
May 28 15:58:20 gibson kernel: ACPI: UEFI 0x00000000DC3C6210 000042 (v01 ALASKA A M I 00000002 01000013)
May 28 15:58:20 gibson kernel: ACPI: IVRS 0x00000000DC3C6258 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
May 28 15:58:20 gibson kernel: ACPI: PCCT 0x00000000DC3C6328 00006E (v01 AMD AMD PCCT 00000001 AMD 00000000)
May 28 15:58:20 gibson kernel: ACPI: SSDT 0x00000000DC3C6398 002F29 (v01 AMD AMD CPU 00000001 AMD 00000001)
May 28 15:58:20 gibson kernel: ACPI: CRAT 0x00000000DC3C92C8 000B58 (v01 AMD AMD CRAT 00000001 AMD 00000001)
May 28 15:58:20 gibson kernel: ACPI: CDIT 0x00000000DC3C9E20 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
May 28 15:58:20 gibson kernel: ACPI: BGRT 0x00000000DC3C9E50 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
May 28 15:58:20 gibson kernel: ACPI: SSDT 0x00000000DC3C9E88 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
May 28 15:58:20 gibson kernel: ACPI: SSDT 0x00000000DC3CBBD8 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
May 28 15:58:20 gibson kernel: ACPI: WSMT 0x00000000DC3CBC98 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
May 28 15:58:20 gibson kernel: ACPI: Reserving FACP table memory at [mem 0xdc3b9a68-0xdc3b9b7b]
May 28 15:58:20 gibson kernel: ACPI: Reserving DSDT table memory at [mem 0xdc3b21f0-0xdc3b9a65]
May 28 15:58:20 gibson kernel: ACPI: Reserving FACS table memory at [mem 0xdc41ee00-0xdc41ee3f]
May 28 15:58:20 gibson kernel: ACPI: Reserving APIC table memory at [mem 0xdc3b9b80-0xdc3b9cdd]
May 28 15:58:20 gibson kernel: ACPI: Reserving FPDT table memory at [mem 0xdc3b9ce0-0xdc3b9d23]
May 28 15:58:20 gibson kernel: ACPI: Reserving FIDT table memory at [mem 0xdc3b9d28-0xdc3b9dc3]
May 28 15:58:20 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3b9dc8-0xdc3b9e8f]
May 28 15:58:20 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3b9e90-0xdc3c2b27]
May 28 15:58:20 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3c2b28-0xdc3c6192]
May 28 15:58:20 gibson kernel: ACPI: Reserving MCFG table memory at [mem 0xdc3c6198-0xdc3c61d3]
May 28 15:58:20 gibson kernel: ACPI: Reserving HPET table memory at [mem 0xdc3c61d8-0xdc3c620f]
May 28 15:58:20 gibson kernel: ACPI: Reserving UEFI table memory at [mem 0xdc3c6210-0xdc3c6251]
May 28 15:58:20 gibson kernel: ACPI: Reserving IVRS table memory at [mem 0xdc3c6258-0xdc3c6327]
May 28 15:58:20 gibson kernel: ACPI: Reserving PCCT table memory at [mem 0xdc3c6328-0xdc3c6395]
May 28 15:58:20 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3c6398-0xdc3c92c0]
May 28 15:58:20 gibson kernel: ACPI: Reserving CRAT table memory at [mem 0xdc3c92c8-0xdc3c9e1f]
May 28 15:58:20 gibson kernel: ACPI: Reserving CDIT table memory at [mem 0xdc3c9e20-0xdc3c9e48]
May 28 15:58:20 gibson kernel: ACPI: Reserving BGRT table memory at [mem 0xdc3c9e50-0xdc3c9e87]
May 28 15:58:20 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3c9e88-0xdc3cbbd1]
May 28 15:58:20 gibson kernel: ACPI: Reserving SSDT table memory at [mem 0xdc3cbbd8-0xdc3cbc96]
May 28 15:58:20 gibson kernel: ACPI: Reserving WSMT table memory at [mem 0xdc3cbc98-0xdc3cbcbf]
May 28 15:58:20 gibson kernel: No NUMA configuration found
May 28 15:58:20 gibson kernel: Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
May 28 15:58:20 gibson kernel: NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
May 28 15:58:20 gibson kernel: Zone ranges:
May 28 15:58:20 gibson kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff]
May 28 15:58:20 gibson kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
May 28 15:58:20 gibson kernel: Normal [mem 0x0000000100000000-0x000000041f37ffff]
May 28 15:58:20 gibson kernel: Device empty
May 28 15:58:20 gibson kernel: Movable zone start for each node
May 28 15:58:20 gibson kernel: Early memory node ranges
May 28 15:58:20 gibson kernel: node 0: [mem 0x0000000000001000-0x000000000009ffff]
May 28 15:58:20 gibson kernel: node 0: [mem 0x0000000000100000-0x0000000009d7ffff]
May 28 15:58:20 gibson kernel: node 0: [mem 0x000000000a000000-0x000000000a1fffff]
May 28 15:58:20 gibson kernel: node 0: [mem 0x000000000a20c000-0x000000000affffff]
May 28 15:58:20 gibson kernel: node 0: [mem 0x000000000b020000-0x00000000dbd57fff]
May 28 15:58:20 gibson kernel: node 0: [mem 0x00000000dbea2000-0x00000000dc022fff]
May 28 15:58:20 gibson kernel: node 0: [mem 0x00000000dd05d000-0x00000000deffffff]
May 28 15:58:20 gibson kernel: node 0: [mem 0x0000000100000000-0x000000041f37ffff]
May 28 15:58:20 gibson kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
May 28 15:58:20 gibson kernel: On node 0, zone DMA: 1 pages in unavailable ranges
May 28 15:58:20 gibson kernel: On node 0, zone DMA: 96 pages in unavailable ranges
May 28 15:58:20 gibson kernel: On node 0, zone DMA32: 640 pages in unavailable ranges
May 28 15:58:20 gibson kernel: On node 0, zone DMA32: 12 pages in unavailable ranges
May 28 15:58:20 gibson kernel: On node 0, zone DMA32: 32 pages in unavailable ranges
May 28 15:58:20 gibson kernel: On node 0, zone DMA32: 330 pages in unavailable ranges
May 28 15:58:20 gibson kernel: On node 0, zone DMA32: 4154 pages in unavailable ranges
May 28 15:58:20 gibson kernel: On node 0, zone Normal: 4096 pages in unavailable ranges
May 28 15:58:20 gibson kernel: On node 0, zone Normal: 3200 pages in unavailable ranges
May 28 15:58:20 gibson kernel: ACPI: PM-Timer IO Port: 0x808
May 28 15:58:20 gibson kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
May 28 15:58:20 gibson kernel: IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
May 28 15:58:20 gibson kernel: IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
May 28 15:58:20 gibson kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
May 28 15:58:20 gibson kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
May 28 15:58:20 gibson kernel: ACPI: Using ACPI (MADT) for SMP configuration information
May 28 15:58:20 gibson kernel: ACPI: HPET id: 0x10228201 base: 0xfed00000
May 28 15:58:20 gibson kernel: e820: update [mem 0xd8177000-0xd81d3fff] usable ==> reserved
May 28 15:58:20 gibson kernel: smpboot: Allowing 32 CPUs, 20 hotplug CPUs
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd8177000-0xd81d3fff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd820d000-0xd820dfff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd822d000-0xd822dfff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd82cb000-0xd82cbfff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd82d9000-0xd82d9fff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xd8442000-0xd8442fff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xdbd58000-0xdbea1fff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xdc023000-0xdc434fff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xdc435000-0xdd05cfff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
May 28 15:58:20 gibson kernel: PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
May 28 15:58:20 gibson kernel: [mem 0xe0000000-0xf7ffffff] available for PCI devices
May 28 15:58:20 gibson kernel: Booting paravirtualized kernel on bare hardware
May 28 15:58:20 gibson kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
May 28 15:58:20 gibson kernel: setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1
May 28 15:58:20 gibson kernel: percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144
May 28 15:58:20 gibson kernel: pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152
May 28 15:58:20 gibson kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
May 28 15:58:20 gibson kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
May 28 15:58:20 gibson kernel: Fallback order for Node 0: 0
May 28 15:58:20 gibson kernel: Built 1 zonelists, mobility grouping on. Total pages: 4116242
May 28 15:58:20 gibson kernel: Policy zone: Normal
May 28 15:58:20 gibson kernel: Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux-zen.img root=PARTUUID="40f60eaa-ca30-8b47-95f9-00bd322c3817" rw quiet splash
May 28 15:58:20 gibson kernel: Unknown kernel command line parameters "splash", will be passed to user space.
May 28 15:58:20 gibson kernel: printk: log_buf_len individual max cpu contribution: 4096 bytes
May 28 15:58:20 gibson kernel: printk: log_buf_len total cpu_extra contributions: 126976 bytes
May 28 15:58:20 gibson kernel: printk: log_buf_len min size: 131072 bytes
May 28 15:58:20 gibson kernel: printk: log_buf_len: 262144 bytes
May 28 15:58:20 gibson kernel: printk: early log buf free: 116848(89%)
May 28 15:58:20 gibson kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
May 28 15:58:20 gibson kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
May 28 15:58:20 gibson kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
May 28 15:58:20 gibson kernel: Memory: 16216620K/16726972K available (16391K kernel code, 2118K rwdata, 10872K rodata, 1812K init, 3204K bss, 510092K reserved, 0K cma-reserved)
May 28 15:58:20 gibson kernel: random: get_random_u64 called from __kmem_cache_create+0x2a/0x6b0 with crng_init=1
May 28 15:58:20 gibson kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
May 28 15:58:20 gibson kernel: ftrace: allocating 42774 entries in 168 pages
May 28 15:58:20 gibson kernel: ftrace: allocated 168 pages with 3 groups
May 28 15:58:20 gibson kernel: Dynamic Preempt: full
May 28 15:58:20 gibson kernel: rcu: Preemptible hierarchical RCU implementation.
May 28 15:58:20 gibson kernel: rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
May 28 15:58:20 gibson kernel: rcu: RCU priority boosting: priority 1 delay 500 ms.
May 28 15:58:20 gibson kernel: Trampoline variant of Tasks RCU enabled.
May 28 15:58:20 gibson kernel: Rude variant of Tasks RCU enabled.
May 28 15:58:20 gibson kernel: Tracing variant of Tasks RCU enabled.
May 28 15:58:20 gibson kernel: rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
May 28 15:58:20 gibson kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
May 28 15:58:20 gibson kernel: NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
May 28 15:58:20 gibson kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
May 28 15:58:20 gibson kernel: random: crng init done (trusting CPU's manufacturer)
May 28 15:58:20 gibson kernel: Console: colour dummy device 80x25
May 28 15:58:20 gibson kernel: printk: console [tty0] enabled
May 28 15:58:20 gibson kernel: ACPI: Core revision 20211217
May 28 15:58:20 gibson kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
May 28 15:58:20 gibson kernel: APIC: Switch to symmetric I/O mode setup
May 28 15:58:20 gibson kernel: Switched APIC routing to physical flat.
May 28 15:58:20 gibson kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
May 28 15:58:20 gibson kernel: tsc: PIT calibration matches HPET. 1 loops
May 28 15:58:20 gibson kernel: tsc: Detected 3600.074 MHz processor
May 28 15:58:20 gibson kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e49953f5c, max_idle_ns: 440795320849 ns
May 28 15:58:20 gibson kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.14 BogoMIPS (lpj=3600074)
May 28 15:58:20 gibson kernel: pid_max: default: 32768 minimum: 301
May 28 15:58:20 gibson kernel: LSM: Security Framework initializing
May 28 15:58:20 gibson kernel: landlock: Up and running.
May 28 15:58:20 gibson kernel: Yama: becoming mindful.
May 28 15:58:20 gibson kernel: LSM support for eBPF active
May 28 15:58:20 gibson kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
May 28 15:58:20 gibson kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
May 28 15:58:20 gibson kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated
May 28 15:58:20 gibson kernel: LVT offset 1 assigned for vector 0xf9
May 28 15:58:20 gibson kernel: LVT offset 2 assigned for vector 0xf4
May 28 15:58:20 gibson kernel: Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
May 28 15:58:20 gibson kernel: Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
May 28 15:58:20 gibson kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
May 28 15:58:20 gibson kernel: Spectre V2 : Mitigation: Retpolines
May 28 15:58:20 gibson kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
May 28 15:58:20 gibson kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
May 28 15:58:20 gibson kernel: Spectre V2 : User space: Mitigation: STIBP via prctl
May 28 15:58:20 gibson kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
May 28 15:58:20 gibson kernel: Freeing SMP alternatives memory: 44K
May 28 15:58:20 gibson kernel: smpboot: CPU0: AMD Ryzen 5 3600 6-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
May 28 15:58:20 gibson kernel: cblist_init_generic: Setting adjustable number of callback queues.
May 28 15:58:20 gibson kernel: cblist_init_generic: Setting shift to 5 and lim to 1.
May 28 15:58:20 gibson kernel: cblist_init_generic: Setting shift to 5 and lim to 1.
May 28 15:58:20 gibson kernel: cblist_init_generic: Setting shift to 5 and lim to 1.
May 28 15:58:20 gibson kernel: Performance Events: Fam17h+ core perfctr, AMD PMU driver.
May 28 15:58:20 gibson kernel: ... version: 0
May 28 15:58:20 gibson kernel: ... bit width: 48
May 28 15:58:20 gibson kernel: ... generic registers: 6
May 28 15:58:20 gibson kernel: ... value mask: 0000ffffffffffff
May 28 15:58:20 gibson kernel: ... max period: 00007fffffffffff
May 28 15:58:20 gibson kernel: ... fixed-purpose events: 0
May 28 15:58:20 gibson kernel: ... event mask: 000000000000003f
May 28 15:58:20 gibson kernel: rcu: Hierarchical SRCU implementation.
May 28 15:58:20 gibson kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
May 28 15:58:20 gibson kernel: smp: Bringing up secondary CPUs ...
May 28 15:58:20 gibson kernel: x86: Booting SMP configuration:
May 28 15:58:20 gibson kernel: .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
May 28 15:58:20 gibson kernel: smp: Brought up 1 node, 12 CPUs
May 28 15:58:20 gibson kernel: smpboot: Max logical packages: 3
May 28 15:58:20 gibson kernel: smpboot: Total of 12 processors activated (86401.77 BogoMIPS)
May 28 15:58:20 gibson kernel: devtmpfs: initialized
May 28 15:58:20 gibson kernel: x86/mm: Memory block size: 128MB
May 28 15:58:20 gibson kernel: ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
May 28 15:58:20 gibson kernel: ACPI: PM: Registering ACPI NVS region [mem 0xdc023000-0xdc434fff] (4268032 bytes)
May 28 15:58:20 gibson kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
May 28 15:58:20 gibson kernel: futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
May 28 15:58:20 gibson kernel: pinctrl core: initialized pinctrl subsystem
May 28 15:58:20 gibson kernel: PM: RTC time: 22:58:17, date: 2022-05-28
May 28 15:58:20 gibson kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
May 28 15:58:20 gibson kernel: DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
May 28 15:58:20 gibson kernel: DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
May 28 15:58:20 gibson kernel: DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
May 28 15:58:20 gibson kernel: audit: initializing netlink subsys (disabled)
May 28 15:58:20 gibson kernel: audit: type=2000 audit(1653778697.132:1): state=initialized audit_enabled=0 res=1
May 28 15:58:20 gibson kernel: thermal_sys: Registered thermal governor 'fair_share'
May 28 15:58:20 gibson kernel: thermal_sys: Registered thermal governor 'bang_bang'
May 28 15:58:20 gibson kernel: thermal_sys: Registered thermal governor 'step_wise'
May 28 15:58:20 gibson kernel: thermal_sys: Registered thermal governor 'user_space'
May 28 15:58:20 gibson kernel: thermal_sys: Registered thermal governor 'power_allocator'
May 28 15:58:20 gibson kernel: cpuidle: using governor ladder
May 28 15:58:20 gibson kernel: cpuidle: using governor menu
May 28 15:58:20 gibson kernel: Detected 1 PCC Subspaces
May 28 15:58:20 gibson kernel: Registering PCC driver as Mailbox controller
May 28 15:58:20 gibson kernel: HugeTLB: can free 4094 vmemmap pages for hugepages-1048576kB
May 28 15:58:20 gibson kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
May 28 15:58:20 gibson kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
May 28 15:58:20 gibson kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
May 28 15:58:20 gibson kernel: PCI: Using configuration type 1 for base access
May 28 15:58:20 gibson kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
May 28 15:58:20 gibson kernel: HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
May 28 15:58:20 gibson kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
May 28 15:58:20 gibson kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
May 28 15:58:20 gibson kernel: ACPI: Added _OSI(Module Device)
May 28 15:58:20 gibson kernel: ACPI: Added _OSI(Processor Device)
May 28 15:58:20 gibson kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
May 28 15:58:20 gibson kernel: ACPI: Added _OSI(Processor Aggregator Device)
May 28 15:58:20 gibson kernel: ACPI: Added _OSI(Linux-Dell-Video)
May 28 15:58:20 gibson kernel: ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
May 28 15:58:20 gibson kernel: ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
May 28 15:58:20 gibson kernel: ACPI: 7 ACPI AML tables successfully acquired and loaded
May 28 15:58:20 gibson kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
May 28 15:58:20 gibson kernel: ACPI: Interpreter enabled
May 28 15:58:20 gibson kernel: ACPI: PM: (supports S0 S3 S4 S5)
May 28 15:58:20 gibson kernel: ACPI: Using IOAPIC for interrupt routing
May 28 15:58:20 gibson kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
May 28 15:58:20 gibson kernel: ACPI: Enabled 2 GPEs in block 00 to 1F
May 28 15:58:20 gibson kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
May 28 15:58:20 gibson kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
May 28 15:58:20 gibson kernel: acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR DPC]
May 28 15:58:20 gibson kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
May 28 15:58:20 gibson kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
May 28 15:58:20 gibson kernel: PCI host bridge to bus 0000:00
May 28 15:58:20 gibson kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
May 28 15:58:20 gibson kernel: pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
May 28 15:58:20 gibson kernel: pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:01.3: [1022:1483] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:00:01.3: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:00:07.1: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:00:08.1: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:00:08.2: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:00:08.3: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
May 28 15:58:20 gibson kernel: pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
May 28 15:58:20 gibson kernel: pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
May 28 15:58:20 gibson kernel: pci 0000:03:00.0: [1022:43d5] type 00 class 0x0c0330
May 28 15:58:20 gibson kernel: pci 0000:03:00.0: reg 0x10: [mem 0xf76a0000-0xf76a7fff 64bit]
May 28 15:58:20 gibson kernel: pci 0000:03:00.0: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:03:00.0: PME# supported from D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
May 28 15:58:20 gibson kernel: pci 0000:03:00.1: reg 0x24: [mem 0xf7680000-0xf769ffff]
May 28 15:58:20 gibson kernel: pci 0000:03:00.1: reg 0x30: [mem 0xf7600000-0xf767ffff pref]
May 28 15:58:20 gibson kernel: pci 0000:03:00.1: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:03:00.1: PME# supported from D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:03:00.2: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:03:00.2: PME# supported from D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:00:01.3: PCI bridge to [bus 03-28]
May 28 15:58:20 gibson kernel: pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
May 28 15:58:20 gibson kernel: pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf76fffff]
May 28 15:58:20 gibson kernel: pci 0000:20:00.0: [1022:43c7] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:20:00.0: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:20:00.0: PME# supported from D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:20:01.0: [1022:43c7] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:20:01.0: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:20:01.0: PME# supported from D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:20:04.0: [1022:43c7] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:20:04.0: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:20:04.0: PME# supported from D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:20:06.0: [1022:43c7] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:20:06.0: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:20:06.0: PME# supported from D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:20:07.0: [1022:43c7] type 01 class 0x060400
May 28 15:58:20 gibson kernel: pci 0000:20:07.0: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:20:07.0: PME# supported from D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:03:00.2: PCI bridge to [bus 20-28]
May 28 15:58:20 gibson kernel: pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
May 28 15:58:20 gibson kernel: pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf75fffff]
May 28 15:58:20 gibson kernel: pci 0000:20:00.0: PCI bridge to [bus 21]
May 28 15:58:20 gibson kernel: pci 0000:20:01.0: PCI bridge to [bus 22]
May 28 15:58:20 gibson kernel: pci 0000:25:00.0: [10ec:8168] type 00 class 0x020000
May 28 15:58:20 gibson kernel: pci 0000:25:00.0: reg 0x10: [io 0xf000-0xf0ff]
May 28 15:58:20 gibson kernel: pci 0000:25:00.0: reg 0x18: [mem 0xf7504000-0xf7504fff 64bit]
May 28 15:58:20 gibson kernel: pci 0000:25:00.0: reg 0x20: [mem 0xf7500000-0xf7503fff 64bit]
May 28 15:58:20 gibson kernel: pci 0000:25:00.0: supports D1 D2
May 28 15:58:20 gibson kernel: pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:20:04.0: PCI bridge to [bus 25]
May 28 15:58:20 gibson kernel: pci 0000:20:04.0: bridge window [io 0xf000-0xffff]
May 28 15:58:20 gibson kernel: pci 0000:20:04.0: bridge window [mem 0xf7500000-0xf75fffff]
May 28 15:58:20 gibson kernel: pci 0000:20:06.0: PCI bridge to [bus 27]
May 28 15:58:20 gibson kernel: pci 0000:20:07.0: PCI bridge to [bus 28]
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: [10de:1c03] type 00 class 0x030000
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: reg 0x24: [io 0xe000-0xe07f]
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: BAR 3: assigned to efifb
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
May 28 15:58:20 gibson kernel: pci 0000:29:00.1: [10de:10f1] type 00 class 0x040300
May 28 15:58:20 gibson kernel: pci 0000:29:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: ASPM: current common clock configuration is inconsistent, reconfiguring
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: PCI bridge to [bus 29]
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
May 28 15:58:20 gibson kernel: pci 0000:2a:00.0: [1022:148a] type 00 class 0x130000
May 28 15:58:20 gibson kernel: pci 0000:2a:00.0: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:00:07.1: PCI bridge to [bus 2a]
May 28 15:58:20 gibson kernel: pci 0000:2b:00.0: [1022:1485] type 00 class 0x130000
May 28 15:58:20 gibson kernel: pci 0000:2b:00.0: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:2b:00.1: [1022:1486] type 00 class 0x108000
May 28 15:58:20 gibson kernel: pci 0000:2b:00.1: reg 0x18: [mem 0xf7300000-0xf73fffff]
May 28 15:58:20 gibson kernel: pci 0000:2b:00.1: reg 0x24: [mem 0xf7408000-0xf7409fff]
May 28 15:58:20 gibson kernel: pci 0000:2b:00.1: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:2b:00.3: [1022:149c] type 00 class 0x0c0330
May 28 15:58:20 gibson kernel: pci 0000:2b:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
May 28 15:58:20 gibson kernel: pci 0000:2b:00.3: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:2b:00.3: PME# supported from D0 D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:2b:00.4: [1022:1487] type 00 class 0x040300
May 28 15:58:20 gibson kernel: pci 0000:2b:00.4: reg 0x10: [mem 0xf7400000-0xf7407fff]
May 28 15:58:20 gibson kernel: pci 0000:2b:00.4: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:2b:00.4: PME# supported from D0 D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:00:08.1: PCI bridge to [bus 2b]
May 28 15:58:20 gibson kernel: pci 0000:00:08.1: bridge window [mem 0xf7200000-0xf74fffff]
May 28 15:58:20 gibson kernel: pci 0000:30:00.0: [1022:7901] type 00 class 0x010601
May 28 15:58:20 gibson kernel: pci 0000:30:00.0: reg 0x24: [mem 0xf7800000-0xf78007ff]
May 28 15:58:20 gibson kernel: pci 0000:30:00.0: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:30:00.0: PME# supported from D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:00:08.2: PCI bridge to [bus 30]
May 28 15:58:20 gibson kernel: pci 0000:00:08.2: bridge window [mem 0xf7800000-0xf78fffff]
May 28 15:58:20 gibson kernel: pci 0000:31:00.0: [1022:7901] type 00 class 0x010601
May 28 15:58:20 gibson kernel: pci 0000:31:00.0: reg 0x24: [mem 0xf7700000-0xf77007ff]
May 28 15:58:20 gibson kernel: pci 0000:31:00.0: enabling Extended Tags
May 28 15:58:20 gibson kernel: pci 0000:31:00.0: PME# supported from D3hot D3cold
May 28 15:58:20 gibson kernel: pci 0000:00:08.3: PCI bridge to [bus 31]
May 28 15:58:20 gibson kernel: pci 0000:00:08.3: bridge window [mem 0xf7700000-0xf77fffff]
May 28 15:58:20 gibson kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 0
May 28 15:58:20 gibson kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 0
May 28 15:58:20 gibson kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 0
May 28 15:58:20 gibson kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 0
May 28 15:58:20 gibson kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 0
May 28 15:58:20 gibson kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 0
May 28 15:58:20 gibson kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 0
May 28 15:58:20 gibson kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 0
May 28 15:58:20 gibson kernel: iommu: Default domain type: Translated
May 28 15:58:20 gibson kernel: iommu: DMA domain TLB invalidation policy: lazy mode
May 28 15:58:20 gibson kernel: SCSI subsystem initialized
May 28 15:58:20 gibson kernel: libata version 3.00 loaded.
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: vgaarb: setting as boot VGA device
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: vgaarb: bridge control possible
May 28 15:58:20 gibson kernel: vgaarb: loaded
May 28 15:58:20 gibson kernel: ACPI: bus type USB registered
May 28 15:58:20 gibson kernel: usbcore: registered new interface driver usbfs
May 28 15:58:20 gibson kernel: usbcore: registered new interface driver hub
May 28 15:58:20 gibson kernel: usbcore: registered new device driver usb
May 28 15:58:20 gibson kernel: pps_core: LinuxPPS API ver. 1 registered
May 28 15:58:20 gibson kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
May 28 15:58:20 gibson kernel: PTP clock support registered
May 28 15:58:20 gibson kernel: EDAC MC: Ver: 3.0.0
May 28 15:58:20 gibson kernel: Registered efivars operations
May 28 15:58:20 gibson kernel: NetLabel: Initializing
May 28 15:58:20 gibson kernel: NetLabel: domain hash size = 128
May 28 15:58:20 gibson kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
May 28 15:58:20 gibson kernel: NetLabel: unlabeled traffic allowed by default
May 28 15:58:20 gibson kernel: mctp: management component transport protocol core
May 28 15:58:20 gibson kernel: NET: Registered PF_MCTP protocol family
May 28 15:58:20 gibson kernel: PCI: Using ACPI for IRQ routing
May 28 15:58:20 gibson kernel: PCI: pci_cache_line_size set to 64 bytes
May 28 15:58:20 gibson kernel: Expanded resource Reserved due to conflict with PCI Bus 0000:00
May 28 15:58:20 gibson kernel: e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
May 28 15:58:20 gibson kernel: e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
May 28 15:58:20 gibson kernel: e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
May 28 15:58:20 gibson kernel: e820: reserve RAM buffer [mem 0xd8177000-0xdbffffff]
May 28 15:58:20 gibson kernel: e820: reserve RAM buffer [mem 0xd820d018-0xdbffffff]
May 28 15:58:20 gibson kernel: e820: reserve RAM buffer [mem 0xd82cb018-0xdbffffff]
May 28 15:58:20 gibson kernel: e820: reserve RAM buffer [mem 0xd8442000-0xdbffffff]
May 28 15:58:20 gibson kernel: e820: reserve RAM buffer [mem 0xdbd58000-0xdbffffff]
May 28 15:58:20 gibson kernel: e820: reserve RAM buffer [mem 0xdc023000-0xdfffffff]
May 28 15:58:20 gibson kernel: e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
May 28 15:58:20 gibson kernel: e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
May 28 15:58:20 gibson kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
May 28 15:58:20 gibson kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
May 28 15:58:20 gibson kernel: clocksource: Switched to clocksource tsc-early
May 28 15:58:20 gibson kernel: VFS: Disk quotas dquot_6.6.0
May 28 15:58:20 gibson kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
May 28 15:58:20 gibson kernel: pnp: PnP ACPI init
May 28 15:58:20 gibson kernel: system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
May 28 15:58:20 gibson kernel: system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved
May 28 15:58:20 gibson kernel: system 00:03: [io 0x0a00-0x0a0f] has been reserved
May 28 15:58:20 gibson kernel: system 00:03: [io 0x0a10-0x0a1f] has been reserved
May 28 15:58:20 gibson kernel: system 00:03: [io 0x0a20-0x0a2f] has been reserved
May 28 15:58:20 gibson kernel: system 00:03: [io 0x0a40-0x0a4f] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x04d0-0x04d1] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x040b] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x04d6] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0c00-0x0c01] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0c14] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0c50-0x0c51] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0c52] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0c6c] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0c6f] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0cd0-0x0cd1] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0cd2-0x0cd3] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0cd4-0x0cd5] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0cd6-0x0cd7] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0cd8-0x0cdf] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0800-0x089f] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0b00-0x0b0f] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0b20-0x0b3f] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0900-0x090f] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [io 0x0910-0x091f] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
May 28 15:58:20 gibson kernel: system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
May 28 15:58:20 gibson kernel: system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
May 28 15:58:20 gibson kernel: system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
May 28 15:58:20 gibson kernel: system 00:04: [mem 0xff000000-0xffffffff] has been reserved
May 28 15:58:20 gibson kernel: pnp: PnP ACPI: found 5 devices
May 28 15:58:20 gibson kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
May 28 15:58:20 gibson kernel: NET: Registered PF_INET protocol family
May 28 15:58:20 gibson kernel: IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
May 28 15:58:20 gibson kernel: tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
May 28 15:58:20 gibson kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
May 28 15:58:20 gibson kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
May 28 15:58:20 gibson kernel: TCP: Hash tables configured (established 131072 bind 65536)
May 28 15:58:20 gibson kernel: MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
May 28 15:58:20 gibson kernel: UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
May 28 15:58:20 gibson kernel: UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
May 28 15:58:20 gibson kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
May 28 15:58:20 gibson kernel: NET: Registered PF_XDP protocol family
May 28 15:58:20 gibson kernel: pci 0000:20:00.0: PCI bridge to [bus 21]
May 28 15:58:20 gibson kernel: pci 0000:20:01.0: PCI bridge to [bus 22]
May 28 15:58:20 gibson kernel: pci 0000:20:04.0: PCI bridge to [bus 25]
May 28 15:58:20 gibson kernel: pci 0000:20:04.0: bridge window [io 0xf000-0xffff]
May 28 15:58:20 gibson kernel: pci 0000:20:04.0: bridge window [mem 0xf7500000-0xf75fffff]
May 28 15:58:20 gibson kernel: pci 0000:20:06.0: PCI bridge to [bus 27]
May 28 15:58:20 gibson kernel: pci 0000:20:07.0: PCI bridge to [bus 28]
May 28 15:58:20 gibson kernel: pci 0000:03:00.2: PCI bridge to [bus 20-28]
May 28 15:58:20 gibson kernel: pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
May 28 15:58:20 gibson kernel: pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf75fffff]
May 28 15:58:20 gibson kernel: pci 0000:00:01.3: PCI bridge to [bus 03-28]
May 28 15:58:20 gibson kernel: pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
May 28 15:58:20 gibson kernel: pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf76fffff]
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: PCI bridge to [bus 29]
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
May 28 15:58:20 gibson kernel: pci 0000:00:07.1: PCI bridge to [bus 2a]
May 28 15:58:20 gibson kernel: pci 0000:00:08.1: PCI bridge to [bus 2b]
May 28 15:58:20 gibson kernel: pci 0000:00:08.1: bridge window [mem 0xf7200000-0xf74fffff]
May 28 15:58:20 gibson kernel: pci 0000:00:08.2: PCI bridge to [bus 30]
May 28 15:58:20 gibson kernel: pci 0000:00:08.2: bridge window [mem 0xf7800000-0xf78fffff]
May 28 15:58:20 gibson kernel: pci 0000:00:08.3: PCI bridge to [bus 31]
May 28 15:58:20 gibson kernel: pci 0000:00:08.3: bridge window [mem 0xf7700000-0xf77fffff]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfec2ffff window]
May 28 15:58:20 gibson kernel: pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
May 28 15:58:20 gibson kernel: pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
May 28 15:58:20 gibson kernel: pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf76fffff]
May 28 15:58:20 gibson kernel: pci_bus 0000:20: resource 0 [io 0xf000-0xffff]
May 28 15:58:20 gibson kernel: pci_bus 0000:20: resource 1 [mem 0xf7500000-0xf75fffff]
May 28 15:58:20 gibson kernel: pci_bus 0000:25: resource 0 [io 0xf000-0xffff]
May 28 15:58:20 gibson kernel: pci_bus 0000:25: resource 1 [mem 0xf7500000-0xf75fffff]
May 28 15:58:20 gibson kernel: pci_bus 0000:29: resource 0 [io 0xe000-0xefff]
May 28 15:58:20 gibson kernel: pci_bus 0000:29: resource 1 [mem 0xf6000000-0xf70fffff]
May 28 15:58:20 gibson kernel: pci_bus 0000:29: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
May 28 15:58:20 gibson kernel: pci_bus 0000:2b: resource 1 [mem 0xf7200000-0xf74fffff]
May 28 15:58:20 gibson kernel: pci_bus 0000:30: resource 1 [mem 0xf7800000-0xf78fffff]
May 28 15:58:20 gibson kernel: pci_bus 0000:31: resource 1 [mem 0xf7700000-0xf77fffff]
May 28 15:58:20 gibson kernel: pci 0000:29:00.1: D0 power state depends on 0000:29:00.0
May 28 15:58:20 gibson kernel: PCI: CLS 64 bytes, default 64
May 28 15:58:20 gibson kernel: pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
May 28 15:58:20 gibson kernel: pci 0000:00:01.0: Adding to iommu group 0
May 28 15:58:20 gibson kernel: pci 0000:00:01.3: Adding to iommu group 1
May 28 15:58:20 gibson kernel: pci 0000:00:02.0: Adding to iommu group 2
May 28 15:58:20 gibson kernel: Trying to unpack rootfs image as initramfs...
May 28 15:58:20 gibson kernel: pci 0000:00:03.0: Adding to iommu group 3
May 28 15:58:20 gibson kernel: pci 0000:00:03.1: Adding to iommu group 4
May 28 15:58:20 gibson kernel: pci 0000:00:04.0: Adding to iommu group 5
May 28 15:58:20 gibson kernel: pci 0000:00:05.0: Adding to iommu group 6
May 28 15:58:20 gibson kernel: pci 0000:00:07.0: Adding to iommu group 7
May 28 15:58:20 gibson kernel: pci 0000:00:07.1: Adding to iommu group 8
May 28 15:58:20 gibson kernel: pci 0000:00:08.0: Adding to iommu group 9
May 28 15:58:20 gibson kernel: pci 0000:00:08.1: Adding to iommu group 10
May 28 15:58:20 gibson kernel: pci 0000:00:08.2: Adding to iommu group 11
May 28 15:58:20 gibson kernel: pci 0000:00:08.3: Adding to iommu group 12
May 28 15:58:20 gibson kernel: pci 0000:00:14.0: Adding to iommu group 13
May 28 15:58:20 gibson kernel: pci 0000:00:14.3: Adding to iommu group 13
May 28 15:58:20 gibson kernel: pci 0000:00:18.0: Adding to iommu group 14
May 28 15:58:20 gibson kernel: pci 0000:00:18.1: Adding to iommu group 14
May 28 15:58:20 gibson kernel: pci 0000:00:18.2: Adding to iommu group 14
May 28 15:58:20 gibson kernel: pci 0000:00:18.3: Adding to iommu group 14
May 28 15:58:20 gibson kernel: pci 0000:00:18.4: Adding to iommu group 14
May 28 15:58:20 gibson kernel: pci 0000:00:18.5: Adding to iommu group 14
May 28 15:58:20 gibson kernel: pci 0000:00:18.6: Adding to iommu group 14
May 28 15:58:20 gibson kernel: pci 0000:00:18.7: Adding to iommu group 14
May 28 15:58:20 gibson kernel: pci 0000:03:00.0: Adding to iommu group 15
May 28 15:58:20 gibson kernel: pci 0000:03:00.1: Adding to iommu group 15
May 28 15:58:20 gibson kernel: pci 0000:03:00.2: Adding to iommu group 15
May 28 15:58:20 gibson kernel: pci 0000:20:00.0: Adding to iommu group 15
May 28 15:58:20 gibson kernel: pci 0000:20:01.0: Adding to iommu group 15
May 28 15:58:20 gibson kernel: pci 0000:20:04.0: Adding to iommu group 15
May 28 15:58:20 gibson kernel: pci 0000:20:06.0: Adding to iommu group 15
May 28 15:58:20 gibson kernel: pci 0000:20:07.0: Adding to iommu group 15
May 28 15:58:20 gibson kernel: pci 0000:25:00.0: Adding to iommu group 15
May 28 15:58:20 gibson kernel: pci 0000:29:00.0: Adding to iommu group 16
May 28 15:58:20 gibson kernel: pci 0000:29:00.1: Adding to iommu group 16
May 28 15:58:20 gibson kernel: pci 0000:2a:00.0: Adding to iommu group 17
May 28 15:58:20 gibson kernel: pci 0000:2b:00.0: Adding to iommu group 18
May 28 15:58:20 gibson kernel: pci 0000:2b:00.1: Adding to iommu group 19
May 28 15:58:20 gibson kernel: pci 0000:2b:00.3: Adding to iommu group 20
May 28 15:58:20 gibson kernel: pci 0000:2b:00.4: Adding to iommu group 21
May 28 15:58:20 gibson kernel: pci 0000:30:00.0: Adding to iommu group 22
May 28 15:58:20 gibson kernel: pci 0000:31:00.0: Adding to iommu group 23
May 28 15:58:20 gibson kernel: pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
May 28 15:58:20 gibson kernel: AMD-Vi: Extended features (0x58f77ef22294ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
May 28 15:58:20 gibson kernel: AMD-Vi: Interrupt remapping enabled
May 28 15:58:20 gibson kernel: AMD-Vi: Virtual APIC enabled
May 28 15:58:20 gibson kernel: AMD-Vi: X2APIC enabled
May 28 15:58:20 gibson kernel: software IO TLB: tearing down default memory pool
May 28 15:58:20 gibson kernel: LVT offset 0 assigned for vector 0x400
May 28 15:58:20 gibson kernel: perf: AMD IBS detected (0x000003ff)
May 28 15:58:20 gibson kernel: perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
May 28 15:58:20 gibson kernel: Initialise system trusted keyrings
May 28 15:58:20 gibson kernel: Key type blacklist registered
May 28 15:58:20 gibson kernel: workingset: timestamp_bits=41 max_order=22 bucket_order=0
May 28 15:58:20 gibson kernel: zbud: loaded
May 28 15:58:20 gibson kernel: Key type asymmetric registered
May 28 15:58:20 gibson kernel: Asymmetric key parser 'x509' registered
May 28 15:58:20 gibson kernel: Freeing initrd memory: 8764K
May 28 15:58:20 gibson kernel: alg: self-tests for CTR-KDF (hmac(sha256)) passed
May 28 15:58:20 gibson kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
May 28 15:58:20 gibson kernel: io scheduler mq-deadline registered
May 28 15:58:20 gibson kernel: io scheduler kyber registered
May 28 15:58:20 gibson kernel: io scheduler bfq registered
May 28 15:58:20 gibson kernel: pcieport 0000:00:07.1: AER: enabled with IRQ 29
May 28 15:58:20 gibson kernel: pcieport 0000:00:08.1: AER: enabled with IRQ 30
May 28 15:58:20 gibson kernel: pcieport 0000:00:08.2: AER: enabled with IRQ 31
May 28 15:58:20 gibson kernel: pcieport 0000:00:08.3: AER: enabled with IRQ 32
May 28 15:58:20 gibson kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May 28 15:58:20 gibson kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
May 28 15:58:20 gibson kernel: ACPI: button: Power Button [PWRB]
May 28 15:58:20 gibson kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
May 28 15:58:20 gibson kernel: ACPI: button: Power Button [PWRF]
May 28 15:58:20 gibson kernel: smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1110
May 28 15:58:20 gibson kernel: Monitor-Mwait will be used to enter C-1 state
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C000: Found 2 idle states
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C002: Found 2 idle states
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C004: Found 2 idle states
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C006: Found 2 idle states
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C008: Found 2 idle states
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C00A: Found 2 idle states
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C001: Found 2 idle states
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C003: Found 2 idle states
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C005: Found 2 idle states
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C007: Found 2 idle states
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C009: Found 2 idle states
May 28 15:58:20 gibson kernel: ACPI: \_PR_.C00B: Found 2 idle states
May 28 15:58:20 gibson kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
May 28 15:58:20 gibson kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
May 28 15:58:20 gibson kernel: Non-volatile memory driver v1.3
May 28 15:58:20 gibson kernel: Linux agpgart interface v0.103
May 28 15:58:20 gibson kernel: AMD-Vi: AMD IOMMUv2 loaded and initialized
May 28 15:58:20 gibson kernel: ahci 0000:03:00.1: version 3.0
May 28 15:58:20 gibson kernel: ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
May 28 15:58:20 gibson kernel: ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
May 28 15:58:20 gibson kernel: ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
May 28 15:58:20 gibson kernel: scsi host0: ahci
May 28 15:58:20 gibson kernel: scsi host1: ahci
May 28 15:58:20 gibson kernel: scsi host2: ahci
May 28 15:58:20 gibson kernel: scsi host3: ahci
May 28 15:58:20 gibson kernel: scsi host4: ahci
May 28 15:58:20 gibson kernel: scsi host5: ahci
May 28 15:58:20 gibson kernel: scsi host6: ahci
May 28 15:58:20 gibson kernel: scsi host7: ahci
May 28 15:58:20 gibson kernel: ata1: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680100 irq 41
May 28 15:58:20 gibson kernel: ata2: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680180 irq 41
May 28 15:58:20 gibson kernel: ata3: DUMMY
May 28 15:58:20 gibson kernel: ata4: DUMMY
May 28 15:58:20 gibson kernel: ata5: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680300 irq 41
May 28 15:58:20 gibson kernel: ata6: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680380 irq 41
May 28 15:58:20 gibson kernel: ata7: DUMMY
May 28 15:58:20 gibson kernel: ata8: DUMMY
May 28 15:58:20 gibson kernel: ahci 0000:30:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
May 28 15:58:20 gibson kernel: ahci 0000:30:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
May 28 15:58:20 gibson kernel: scsi host8: ahci
May 28 15:58:20 gibson kernel: ata9: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800100 irq 43
May 28 15:58:20 gibson kernel: ahci 0000:31:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
May 28 15:58:20 gibson kernel: ahci 0000:31:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
May 28 15:58:20 gibson kernel: scsi host9: ahci
May 28 15:58:20 gibson kernel: ata10: SATA max UDMA/133 abar m2048@0xf7700000 port 0xf7700100 irq 45
May 28 15:58:20 gibson kernel: ACPI: bus type drm_connector registered
May 28 15:58:20 gibson kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 28 15:58:20 gibson kernel: ehci-pci: EHCI PCI platform driver
May 28 15:58:20 gibson kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 28 15:58:20 gibson kernel: ohci-pci: OHCI PCI platform driver
May 28 15:58:20 gibson kernel: uhci_hcd: USB Universal Host Controller Interface driver
May 28 15:58:20 gibson kernel: usbcore: registered new interface driver usbserial_generic
May 28 15:58:20 gibson kernel: usbserial: USB Serial support registered for generic
May 28 15:58:20 gibson kernel: rtc_cmos 00:02: RTC can wake from S4
May 28 15:58:20 gibson kernel: rtc_cmos 00:02: registered as rtc0
May 28 15:58:20 gibson kernel: rtc_cmos 00:02: setting system clock to 2022-05-28T22:58:17 UTC (1653778697)
May 28 15:58:20 gibson kernel: rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
May 28 15:58:20 gibson kernel: ledtrig-cpu: registered to indicate activity on CPUs
May 28 15:58:20 gibson kernel: efifb: probing for efifb
May 28 15:58:20 gibson kernel: efifb: Ignoring BGRT: unexpected or invalid BMP data
May 28 15:58:20 gibson kernel: efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
May 28 15:58:20 gibson kernel: efifb: mode is 1024x768x32, linelength=4096, pages=1
May 28 15:58:20 gibson kernel: efifb: scrolling: redraw
May 28 15:58:20 gibson kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
May 28 15:58:20 gibson kernel: fbcon: Deferring console take-over
May 28 15:58:20 gibson kernel: fb0: EFI VGA frame buffer device
May 28 15:58:20 gibson kernel: hid: raw HID events driver (C) Jiri Kosina
May 28 15:58:20 gibson kernel: ashmem: initialized
May 28 15:58:20 gibson kernel: drop_monitor: Initializing network drop monitor service
May 28 15:58:20 gibson kernel: Initializing XFRM netlink socket
May 28 15:58:20 gibson kernel: NET: Registered PF_INET6 protocol family
May 28 15:58:20 gibson kernel: Segment Routing with IPv6
May 28 15:58:20 gibson kernel: RPL Segment Routing with IPv6
May 28 15:58:20 gibson kernel: In-situ OAM (IOAM) with IPv6
May 28 15:58:20 gibson kernel: NET: Registered PF_PACKET protocol family
May 28 15:58:20 gibson kernel: microcode: CPU0: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: CPU1: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: CPU2: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: CPU3: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: CPU4: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: CPU5: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: CPU6: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: CPU7: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: CPU8: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: CPU9: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: CPU10: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: CPU11: patch_level=0x08701013
May 28 15:58:20 gibson kernel: microcode: Microcode Update Driver: v2.2.
May 28 15:58:20 gibson kernel: resctrl: L3 allocation detected
May 28 15:58:20 gibson kernel: resctrl: MB allocation detected
May 28 15:58:20 gibson kernel: resctrl: L3 monitoring detected
May 28 15:58:20 gibson kernel: IPI shorthand broadcast: enabled
May 28 15:58:20 gibson kernel: sched_clock: Marking stable (228976966, -6995990)->(243824078, -21843102)
May 28 15:58:20 gibson kernel: registered taskstats version 1
May 28 15:58:20 gibson kernel: Loading compiled-in X.509 certificates
May 28 15:58:20 gibson kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 750d4d2a03178ca9604db031bcc9c4e36d083359'
May 28 15:58:20 gibson kernel: zswap: loaded using pool lz4/z3fold
May 28 15:58:20 gibson kernel: Key type ._fscrypt registered
May 28 15:58:20 gibson kernel: Key type .fscrypt registered
May 28 15:58:20 gibson kernel: Key type fscrypt-provisioning registered
May 28 15:58:20 gibson kernel: PM: Magic number: 6:875:1008
May 28 15:58:20 gibson kernel: memory memory47: hash matches
May 28 15:58:20 gibson kernel: RAS: Correctable Errors collector initialized.
May 28 15:58:20 gibson kernel: ata9: SATA link down (SStatus 0 SControl 300)
May 28 15:58:20 gibson kernel: ata10: SATA link down (SStatus 0 SControl 300)
May 28 15:58:20 gibson kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 28 15:58:20 gibson kernel: ata1.00: supports DRM functions and may not be fully accessible
May 28 15:58:20 gibson kernel: ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
May 28 15:58:20 gibson kernel: ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
May 28 15:58:20 gibson kernel: ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
May 28 15:58:20 gibson kernel: ata1.00: supports DRM functions and may not be fully accessible
May 28 15:58:20 gibson kernel: ata1.00: configured for UDMA/133
May 28 15:58:20 gibson kernel: scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
May 28 15:58:20 gibson kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
May 28 15:58:20 gibson kernel: sd 0:0:0:0: [sda] Write Protect is off
May 28 15:58:20 gibson kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 28 15:58:20 gibson kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 28 15:58:20 gibson kernel: sda: sda1 sda2 sda3
May 28 15:58:20 gibson kernel: sd 0:0:0:0: [sda] supports TCG Opal
May 28 15:58:20 gibson kernel: sd 0:0:0:0: [sda] Attached SCSI disk
May 28 15:58:20 gibson kernel: ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 28 15:58:20 gibson kernel: ata2.00: ATA-9: WDC WD80EFAX-68KNBN0, 81.00A81, max UDMA/133
May 28 15:58:20 gibson kernel: ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
May 28 15:58:20 gibson kernel: ata2.00: Features: NCQ-sndrcv NCQ-prio
May 28 15:58:20 gibson kernel: ata2.00: configured for UDMA/133
May 28 15:58:20 gibson kernel: scsi 1:0:0:0: Direct-Access ATA WDC WD80EFAX-68K 0A81 PQ: 0 ANSI: 5
May 28 15:58:20 gibson kernel: sd 1:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
May 28 15:58:20 gibson kernel: sd 1:0:0:0: [sdb] 4096-byte physical blocks
May 28 15:58:20 gibson kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 28 15:58:20 gibson kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
May 28 15:58:20 gibson kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 28 15:58:20 gibson kernel: sdb: sdb1
May 28 15:58:20 gibson kernel: tsc: Refined TSC clocksource calibration: 3599.999 MHz
May 28 15:58:20 gibson kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4525366a, max_idle_ns: 440795257657 ns
May 28 15:58:20 gibson kernel: clocksource: Switched to clocksource tsc
May 28 15:58:20 gibson kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
May 28 15:58:20 gibson kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 28 15:58:20 gibson kernel: ata5.00: ATA-9: WDC WD80EFAX-68KNBN0, 81.00A81, max UDMA/133
May 28 15:58:20 gibson kernel: ata5.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
May 28 15:58:20 gibson kernel: ata5.00: Features: NCQ-sndrcv NCQ-prio
May 28 15:58:20 gibson kernel: ata5.00: configured for UDMA/133
May 28 15:58:20 gibson kernel: scsi 4:0:0:0: Direct-Access ATA WDC WD80EFAX-68K 0A81 PQ: 0 ANSI: 5
May 28 15:58:20 gibson kernel: sd 4:0:0:0: [sdc] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
May 28 15:58:20 gibson kernel: sd 4:0:0:0: [sdc] 4096-byte physical blocks
May 28 15:58:20 gibson kernel: sd 4:0:0:0: [sdc] Write Protect is off
May 28 15:58:20 gibson kernel: sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
May 28 15:58:20 gibson kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 28 15:58:20 gibson kernel: sdc: sdc1
May 28 15:58:20 gibson kernel: sd 4:0:0:0: [sdc] Attached SCSI disk
May 28 15:58:20 gibson kernel: ata6: SATA link down (SStatus 0 SControl 330)
May 28 15:58:20 gibson kernel: Freeing unused decrypted memory: 2036K
May 28 15:58:20 gibson kernel: Freeing unused kernel image (initmem) memory: 1812K
May 28 15:58:20 gibson kernel: Write protecting the kernel read-only data: 30720k
May 28 15:58:20 gibson kernel: Freeing unused kernel image (text/rodata gap) memory: 2040K
May 28 15:58:20 gibson kernel: Freeing unused kernel image (rodata/data gap) memory: 1416K
May 28 15:58:20 gibson kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
May 28 15:58:20 gibson kernel: rodata_test: all tests were successful
May 28 15:58:20 gibson kernel: Run /init as init process
May 28 15:58:20 gibson kernel: with arguments:
May 28 15:58:20 gibson kernel: /init
May 28 15:58:20 gibson kernel: splash
May 28 15:58:20 gibson kernel: with environment:
May 28 15:58:20 gibson kernel: HOME=/
May 28 15:58:20 gibson kernel: TERM=linux
May 28 15:58:20 gibson kernel: fbcon: Taking over console
May 28 15:58:20 gibson kernel: Console: switching to colour frame buffer device 128x48
May 28 15:58:20 gibson kernel: xhci_hcd 0000:03:00.0: xHCI Host Controller
May 28 15:58:20 gibson kernel: xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
May 28 15:58:20 gibson kernel: xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
May 28 15:58:20 gibson kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
May 28 15:58:20 gibson kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 15:58:20 gibson kernel: usb usb1: Product: xHCI Host Controller
May 28 15:58:20 gibson kernel: usb usb1: Manufacturer: Linux 5.17.9-zen1-1-zen xhci-hcd
May 28 15:58:20 gibson kernel: usb usb1: SerialNumber: 0000:03:00.0
May 28 15:58:20 gibson kernel: hub 1-0:1.0: USB hub found
May 28 15:58:20 gibson kernel: hub 1-0:1.0: 10 ports detected
May 28 15:58:20 gibson kernel: xhci_hcd 0000:03:00.0: xHCI Host Controller
May 28 15:58:20 gibson kernel: xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
May 28 15:58:20 gibson kernel: xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
May 28 15:58:20 gibson kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
May 28 15:58:20 gibson kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
May 28 15:58:20 gibson kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 15:58:20 gibson kernel: usb usb2: Product: xHCI Host Controller
May 28 15:58:20 gibson kernel: usb usb2: Manufacturer: Linux 5.17.9-zen1-1-zen xhci-hcd
May 28 15:58:20 gibson kernel: usb usb2: SerialNumber: 0000:03:00.0
May 28 15:58:20 gibson kernel: hub 2-0:1.0: USB hub found
May 28 15:58:20 gibson kernel: hub 2-0:1.0: 4 ports detected
May 28 15:58:20 gibson kernel: xhci_hcd 0000:2b:00.3: xHCI Host Controller
May 28 15:58:20 gibson kernel: xhci_hcd 0000:2b:00.3: new USB bus registered, assigned bus number 3
May 28 15:58:20 gibson kernel: xhci_hcd 0000:2b:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
May 28 15:58:20 gibson kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
May 28 15:58:20 gibson kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 15:58:20 gibson kernel: usb usb3: Product: xHCI Host Controller
May 28 15:58:20 gibson kernel: usb usb3: Manufacturer: Linux 5.17.9-zen1-1-zen xhci-hcd
May 28 15:58:20 gibson kernel: usb usb3: SerialNumber: 0000:2b:00.3
May 28 15:58:20 gibson kernel: hub 3-0:1.0: USB hub found
May 28 15:58:20 gibson kernel: hub 3-0:1.0: 4 ports detected
May 28 15:58:20 gibson kernel: xhci_hcd 0000:2b:00.3: xHCI Host Controller
May 28 15:58:20 gibson kernel: xhci_hcd 0000:2b:00.3: new USB bus registered, assigned bus number 4
May 28 15:58:20 gibson kernel: xhci_hcd 0000:2b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
May 28 15:58:20 gibson kernel: usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
May 28 15:58:20 gibson kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
May 28 15:58:20 gibson kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 28 15:58:20 gibson kernel: usb usb4: Product: xHCI Host Controller
May 28 15:58:20 gibson kernel: usb usb4: Manufacturer: Linux 5.17.9-zen1-1-zen xhci-hcd
May 28 15:58:20 gibson kernel: usb usb4: SerialNumber: 0000:2b:00.3
May 28 15:58:20 gibson kernel: hub 4-0:1.0: USB hub found
May 28 15:58:20 gibson kernel: hub 4-0:1.0: 4 ports detected
May 28 15:58:20 gibson kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
May 28 15:58:20 gibson kernel: usb 1-1: new full-speed USB device number 2 using xhci_hcd
May 28 15:58:20 gibson systemd[1]: Successfully credited entropy passed from boot loader.
May 28 15:58:20 gibson systemd[1]: systemd 251.1-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
May 28 15:58:20 gibson systemd[1]: Detected architecture x86-64.
May 28 15:58:20 gibson systemd[1]: Hostname set to <gibson>.
May 28 15:58:20 gibson kernel: usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
May 28 15:58:20 gibson kernel: usb 4-4: New USB device found, idVendor=0bc2, idProduct=2344, bcdDevice= 7.12
May 28 15:58:20 gibson kernel: usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 28 15:58:20 gibson kernel: usb 4-4: Product: Portable
May 28 15:58:20 gibson kernel: usb 4-4: Manufacturer: Seagate
May 28 15:58:20 gibson kernel: usb 4-4: SerialNumber: NAAHMZ8V
May 28 15:58:20 gibson systemd[1]: Queued start job for default target Graphical Interface.
May 28 15:58:20 gibson systemd[1]: Created slice Slice /system/getty.
May 28 15:58:20 gibson systemd[1]: Created slice Slice /system/modprobe.
May 28 15:58:20 gibson systemd[1]: Created slice Slice /system/systemd-fsck.
May 28 15:58:20 gibson systemd[1]: Created slice User and Session Slice.
May 28 15:58:20 gibson systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
May 28 15:58:20 gibson systemd[1]: Started Forward Password Requests to Wall Directory Watch.
May 28 15:58:20 gibson systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
May 28 15:58:20 gibson systemd[1]: Reached target Local Encrypted Volumes.
May 28 15:58:20 gibson systemd[1]: Reached target Local Integrity Protected Volumes.
May 28 15:58:20 gibson systemd[1]: Reached target Path Units.
May 28 15:58:20 gibson systemd[1]: Reached target Remote File Systems.
May 28 15:58:20 gibson systemd[1]: Reached target Slice Units.
May 28 15:58:20 gibson systemd[1]: Reached target System Time Set.
May 28 15:58:20 gibson systemd[1]: Reached target Local Verity Protected Volumes.
May 28 15:58:20 gibson systemd[1]: Listening on Device-mapper event daemon FIFOs.
May 28 15:58:20 gibson systemd[1]: Listening on LVM2 poll daemon socket.
May 28 15:58:20 gibson systemd[1]: Listening on Process Core Dump Socket.
May 28 15:58:20 gibson systemd[1]: Listening on Journal Audit Socket.
May 28 15:58:20 gibson systemd[1]: Listening on Journal Socket (/dev/log).
May 28 15:58:20 gibson systemd[1]: Listening on Journal Socket.
May 28 15:58:20 gibson systemd[1]: Listening on udev Control Socket.
May 28 15:58:20 gibson systemd[1]: Listening on udev Kernel Socket.
May 28 15:58:20 gibson systemd[1]: Mounting Huge Pages File System...
May 28 15:58:20 gibson systemd[1]: Mounting POSIX Message Queue File System...
May 28 15:58:20 gibson systemd[1]: Mounting Kernel Debug File System...
May 28 15:58:20 gibson systemd[1]: Mounting Kernel Trace File System...
May 28 15:58:20 gibson systemd[1]: Starting Create List of Static Device Nodes...
May 28 15:58:20 gibson systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
May 28 15:58:20 gibson systemd[1]: Starting Load Kernel Module configfs...
May 28 15:58:20 gibson systemd[1]: Starting Load Kernel Module drm...
May 28 15:58:20 gibson systemd[1]: Starting Load Kernel Module fuse...
May 28 15:58:20 gibson systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
May 28 15:58:20 gibson systemd[1]: Starting Load Kernel Modules...
May 28 15:58:20 gibson systemd[1]: Starting Remount Root and Kernel File Systems...
May 28 15:58:20 gibson systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd[1]: Starting Coldplug All udev Devices...
May 28 15:58:20 gibson systemd[1]: Mounted Huge Pages File System.
May 28 15:58:20 gibson systemd[1]: Mounted POSIX Message Queue File System.
May 28 15:58:20 gibson systemd[1]: Mounted Kernel Debug File System.
May 28 15:58:20 gibson systemd[1]: Mounted Kernel Trace File System.
May 28 15:58:20 gibson systemd[1]: Finished Create List of Static Device Nodes.
May 28 15:58:20 gibson systemd[1]: modprobe@configfs.service: Deactivated successfully.
May 28 15:58:20 gibson systemd[1]: Finished Load Kernel Module configfs.
May 28 15:58:20 gibson systemd[1]: modprobe@drm.service: Deactivated successfully.
May 28 15:58:20 gibson systemd[1]: Finished Load Kernel Module drm.
May 28 15:58:20 gibson systemd[1]: Mounting Kernel Configuration File System...
May 28 15:58:20 gibson systemd[1]: Mounted Kernel Configuration File System.
May 28 15:58:20 gibson kernel: EXT4-fs (sda2): re-mounted. Quota mode: none.
May 28 15:58:20 gibson systemd[1]: Finished Remount Root and Kernel File Systems.
May 28 15:58:20 gibson systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 15:58:20 gibson kernel: fuse: init (API version 7.36)
May 28 15:58:20 gibson systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
May 28 15:58:20 gibson systemd[1]: Starting Load/Save Random Seed...
May 28 15:58:20 gibson systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
May 28 15:58:20 gibson systemd[1]: Starting Create Static Device Nodes in /dev...
May 28 15:58:20 gibson systemd[1]: modprobe@fuse.service: Deactivated successfully.
May 28 15:58:20 gibson systemd[1]: Finished Load Kernel Module fuse.
May 28 15:58:20 gibson systemd[1]: Mounting FUSE Control File System...
May 28 15:58:20 gibson systemd[1]: Mounted FUSE Control File System.
May 28 15:58:20 gibson kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
May 28 15:58:20 gibson kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
May 28 15:58:20 gibson kernel: sd 4:0:0:0: Attached scsi generic sg2 type 0
May 28 15:58:20 gibson systemd[1]: Finished Load/Save Random Seed.
May 28 15:58:20 gibson systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 15:58:20 gibson systemd[1]: Finished Create Static Device Nodes in /dev.
May 28 15:58:20 gibson systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of a failed condition check (ConditionKernelVersion=<5.6).
May 28 15:58:20 gibson systemd[1]: Starting Journal Service...
May 28 15:58:20 gibson systemd[1]: Starting Rule-based Manager for Device Events and Files...
May 28 15:58:20 gibson systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
May 28 15:58:20 gibson systemd[1]: Reached target Preparation for Local File Systems.
May 28 15:58:20 gibson systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of a failed condition check (ConditionPathExists=/var/lib/machines.raw).
May 28 15:58:20 gibson systemd[1]: Finished Coldplug All udev Devices.
May 28 15:58:20 gibson kernel: audit: type=1130 audit(1653778700.018:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd-journald[332]: Journal started
May 28 15:58:20 gibson systemd-journald[332]: Runtime Journal (/run/log/journal/44b35a27b93d43dcb0fdea5a63a529ed) is 8.0M, max 800.3M, 792.3M free.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:19 gibson systemd-modules-load[323]: Inserted module 'crypto_user'
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:19 gibson systemd-modules-load[323]: Inserted module 'sg'
May 28 15:58:20 gibson systemd-udevd[333]: Using default interface naming scheme 'v251'.
May 28 15:58:20 gibson systemd[1]: Starting Flush Journal to Persistent Storage...
May 28 15:58:20 gibson systemd[1]: Started Journal Service.
May 28 15:58:20 gibson kernel: audit: type=1130 audit(1653778700.038:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd-journald[332]: Time spent on flushing to /var/log/journal/44b35a27b93d43dcb0fdea5a63a529ed is 40.037ms for 977 entries.
May 28 15:58:20 gibson systemd-journald[332]: System Journal (/var/log/journal/44b35a27b93d43dcb0fdea5a63a529ed) is 2.1G, max 4.0G, 1.8G free.
May 28 15:58:20 gibson systemd-journald[332]: Received client request to flush runtime journal.
May 28 15:58:20 gibson kernel: nvidia: loading out-of-tree module taints kernel.
May 28 15:58:20 gibson kernel: nvidia: module license 'NVIDIA' taints kernel.
May 28 15:58:20 gibson kernel: Disabling lock debugging due to kernel taint
May 28 15:58:20 gibson kernel: audit: type=1130 audit(1653778700.078:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson kernel: nvidia: module verification failed: signature and/or required key missing - tainting kernel
May 28 15:58:20 gibson kernel: acpi_cpufreq: overriding BIOS provided _PSD data
May 28 15:58:20 gibson kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 236
May 28 15:58:20 gibson kernel:
May 28 15:58:20 gibson kernel: nvidia 0000:29:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
May 28 15:58:20 gibson kernel: acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
May 28 15:58:20 gibson kernel: usb 1-1: New USB device found, idVendor=05ac, idProduct=024f, bcdDevice= 1.12
May 28 15:58:20 gibson kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 28 15:58:20 gibson kernel: usb 1-1: Product: Keychron K6
May 28 15:58:20 gibson kernel: usb 1-1: Manufacturer: Keychron
May 28 15:58:20 gibson kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
May 28 15:58:20 gibson kernel: piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
May 28 15:58:20 gibson kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
May 28 15:58:20 gibson kernel: RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
May 28 15:58:20 gibson kernel: RAPL PMU: hw unit of domain package 2^-16 Joules
May 28 15:58:20 gibson kernel: cryptd: max_cpu_qlen set to 1000
May 28 15:58:20 gibson kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
May 28 15:58:20 gibson kernel: sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
May 28 15:58:20 gibson kernel: sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd-udevd[333]: Configuration file /usr/lib/udev/rules.d/77-mm-fibocom-port-types.rules is marked executable. Please remove executable permission bits. Proceeding anyway.
May 28 15:58:20 gibson mtp-probe[401]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:08.1/0000:2b:00.3/usb4/4-4"
May 28 15:58:20 gibson systemd[1]: Started Rule-based Manager for Device Events and Files.
May 28 15:58:20 gibson mtp-probe[401]: bus: 4, device: 2 was not an MTP device
May 28 15:58:20 gibson systemd[1]: Finished Flush Journal to Persistent Storage.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson kernel: audit: type=1130 audit(1653778700.165:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson kernel: ccp 0000:2b:00.1: enabling device (0000 -> 0002)
May 28 15:58:20 gibson kernel: usbcore: registered new interface driver usb-storage
May 28 15:58:20 gibson kernel: ccp 0000:2b:00.1: ccp: unable to access the device: you might be running a broken BIOS.
May 28 15:58:20 gibson kernel: AVX2 version of gcm_enc/dec engaged.
May 28 15:58:20 gibson kernel: AES CTR mode by8 optimization enabled
May 28 15:58:20 gibson kernel: scsi host10: uas
May 28 15:58:20 gibson kernel: usbcore: registered new interface driver uas
May 28 15:58:20 gibson kernel: scsi 10:0:0:0: Direct-Access Seagate Portable 0712 PQ: 0 ANSI: 6
May 28 15:58:20 gibson kernel: sd 10:0:0:0: Attached scsi generic sg3 type 0
May 28 15:58:20 gibson kernel: sd 10:0:0:0: [sdd] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
May 28 15:58:20 gibson kernel: sd 10:0:0:0: [sdd] 4096-byte physical blocks
May 28 15:58:20 gibson kernel: sd 10:0:0:0: [sdd] Write Protect is off
May 28 15:58:20 gibson kernel: sd 10:0:0:0: [sdd] Mode Sense: 53 00 00 08
May 28 15:58:20 gibson kernel: sd 10:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 28 15:58:20 gibson kernel: sd 10:0:0:0: [sdd] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
May 28 15:58:20 gibson systemd[1]: Found device Samsung_SSD_850_EVO_500GB 3.
May 28 15:58:20 gibson systemd[1]: Found device Samsung_SSD_850_EVO_500GB 1.
May 28 15:58:20 gibson systemd[1]: Activating swap /dev/disk/by-uuid/7c111466-0d33-4d77-9ffd-e3062150d5d5...
May 28 15:58:20 gibson systemd[1]: Starting File System Check on /dev/disk/by-uuid/D2F4-566C...
May 28 15:58:20 gibson kernel: r8169 0000:25:00.0 eth0: RTL8168h/8111h, 2c:f0:5d:21:3e:c3, XID 541, IRQ 60
May 28 15:58:20 gibson kernel: r8169 0000:25:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
May 28 15:58:20 gibson kernel: Adding 9227464k swap on /dev/sda3. Priority:-2 extents:1 across:9227464k SSFS
May 28 15:58:20 gibson kernel: sdd: sdd1
May 28 15:58:20 gibson kernel: sd 10:0:0:0: [sdd] Attached SCSI disk
May 28 15:58:20 gibson systemd[1]: Activated swap /dev/disk/by-uuid/7c111466-0d33-4d77-9ffd-e3062150d5d5.
May 28 15:58:20 gibson systemd[1]: Reached target Swaps.
May 28 15:58:20 gibson systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
May 28 15:58:20 gibson systemd[1]: Mounting Temporary Directory /tmp...
May 28 15:58:20 gibson systemd[1]: Mounted Temporary Directory /tmp.
May 28 15:58:20 gibson kernel: md/raid1:md127: active with 2 out of 2 mirrors
May 28 15:58:20 gibson systemd[1]: Started Timer to wait for more drives before activating degraded array md127..
May 28 15:58:20 gibson systemd-fsck[455]: fsck.fat 4.2 (2021-01-31)
May 28 15:58:20 gibson systemd-fsck[455]: /dev/sda1: 29 files, 28881/76646 clusters
May 28 15:58:20 gibson systemd[1]: Finished File System Check on /dev/disk/by-uuid/D2F4-566C.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-D2F4\x2d566C comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd[1]: boot.mount: Directory /boot to mount over is not empty, mounting anyway.
May 28 15:58:20 gibson systemd[1]: Mounting /boot...
May 28 15:58:20 gibson kernel: audit: type=1130 audit(1653778700.254:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-D2F4\x2d566C comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson kernel: md127: detected capacity change from 0 to 15627581440
May 28 15:58:20 gibson systemd[1]: Mounted /boot.
May 28 15:58:20 gibson systemd[1]: Reached target Local File Systems.
May 28 15:58:20 gibson systemd[1]: Rebuild Dynamic Linker Cache was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd[1]: Starting Set Up Additional Binary Formats...
May 28 15:58:20 gibson systemd[1]: Store a System Token in an EFI Variable was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd[1]: Starting Automatic Boot Loader Update...
May 28 15:58:20 gibson systemd[1]: Commit a transient machine-id on disk was skipped because of a failed condition check (ConditionPathIsMountPoint=/etc/machine-id).
May 28 15:58:20 gibson systemd[1]: Starting Create Volatile Files and Directories...
May 28 15:58:20 gibson systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 466 (systemd-binfmt)
May 28 15:58:20 gibson bootctl[467]: Skipping "/boot/EFI/systemd/systemd-bootx64.efi", since same boot loader version in place already.
May 28 15:58:20 gibson bootctl[467]: Skipping "/boot/EFI/BOOT/BOOTX64.EFI", since same boot loader version in place already.
May 28 15:58:20 gibson systemd[1]: Finished Automatic Boot Loader Update.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-boot-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson kernel: audit: type=1130 audit(1653778700.292:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-boot-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd[1]: Finished Create Volatile Files and Directories.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd[1]: Rebuild Journal Catalog was skipped because of a failed condition check (ConditionNeedsUpdate=/var).
May 28 15:58:20 gibson systemd[1]: Update is Completed was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd[1]: Starting Record System Boot/Shutdown in UTMP...
May 28 15:58:20 gibson kernel: audit: type=1130 audit(1653778700.312:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson audit[471]: SYSTEM_BOOT pid=471 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson kernel: usb 1-8: new full-speed USB device number 3 using xhci_hcd
May 28 15:58:20 gibson kernel: audit: type=1127 audit(1653778700.315:9): pid=471 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd[1]: Finished Record System Boot/Shutdown in UTMP.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson kernel: audit: type=1130 audit(1653778700.317:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 515.43.04 Tue Apr 26 15:52:32 UTC 2022
May 28 15:58:20 gibson kernel: SVM: TSC scaling supported
May 28 15:58:20 gibson kernel: kvm: Nested Virtualization enabled
May 28 15:58:20 gibson kernel: SVM: kvm: Nested Paging enabled
May 28 15:58:20 gibson kernel: SEV supported: 509 ASIDs
May 28 15:58:20 gibson kernel: SVM: Virtual VMLOAD VMSAVE supported
May 28 15:58:20 gibson kernel: SVM: Virtual GIF supported
May 28 15:58:20 gibson kernel: SVM: LBR virtualization supported
May 28 15:58:20 gibson kernel: r8169 0000:25:00.0 enp37s0: renamed from eth0
May 28 15:58:20 gibson kernel: nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
May 28 15:58:20 gibson kernel: MCE: In-kernel MCE decoding enabled.
May 28 15:58:20 gibson kernel: snd_hda_intel 0000:29:00.1: Disabling MSI
May 28 15:58:20 gibson kernel: snd_hda_intel 0000:29:00.1: Handle vga_switcheroo audio client
May 28 15:58:20 gibson kernel: snd_hda_intel 0000:2b:00.4: enabling device (0000 -> 0002)
May 28 15:58:20 gibson systemd-udevd[356]: nvidia: Process '/usr/bin/bash -c '/usr/bin/mknod -Z -m 666 /dev/nvidiactl c $(grep nvidia-frontend /proc/devices | cut -d \ -f 1) 255'' failed with exit code 1.
May 28 15:58:20 gibson kernel: nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 515.43.04 Tue Apr 26 15:44:44 UTC 2022
May 28 15:58:20 gibson kernel: [drm] [nvidia-drm] [GPU ID 0x00002900] Loading driver
May 28 15:58:20 gibson kernel: [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:29:00.0 on minor 0
May 28 15:58:20 gibson systemd-modules-load[323]: Inserted module 'nvidia_uvm'
May 28 15:58:20 gibson kernel: nvidia-uvm: Loaded the UVM driver, major device number 234.
May 28 15:58:20 gibson kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input2
May 28 15:58:20 gibson kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input3
May 28 15:58:20 gibson kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input4
May 28 15:58:20 gibson kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input5
May 28 15:58:20 gibson kernel: input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input6
May 28 15:58:20 gibson kernel: input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input7
May 28 15:58:20 gibson kernel: input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0/input8
May 28 15:58:20 gibson kernel: intel_rapl_common: Found RAPL domain package
May 28 15:58:20 gibson kernel: intel_rapl_common: Found RAPL domain core
May 28 15:58:20 gibson kernel: vboxdrv: Found 12 processor cores
May 28 15:58:20 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
May 28 15:58:20 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
May 28 15:58:20 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
May 28 15:58:20 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
May 28 15:58:20 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: inputs:
May 28 15:58:20 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
May 28 15:58:20 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
May 28 15:58:20 gibson kernel: snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
May 28 15:58:20 gibson systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of a failed condition check (ConditionKernelVersion=<5.6).
May 28 15:58:20 gibson systemd[1]: Rebuild Dynamic Linker Cache was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd[1]: Store a System Token in an EFI Variable was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 15:58:20 gibson systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 15:58:20 gibson systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
May 28 15:58:20 gibson systemd[1]: Rebuild Journal Catalog was skipped because of a failed condition check (ConditionNeedsUpdate=/var).
May 28 15:58:20 gibson audit: BPF prog-id=16 op=LOAD
May 28 15:58:20 gibson systemd[1]: Commit a transient machine-id on disk was skipped because of a failed condition check (ConditionPathIsMountPoint=/etc/machine-id).
May 28 15:58:20 gibson systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
May 28 15:58:20 gibson kernel: vboxdrv: TSC mode is Invariant, tentative frequency 3599989725 Hz
May 28 15:58:20 gibson kernel: vboxdrv: Successfully loaded version 6.1.34 r150636 (interface 0x00320000)
May 28 15:58:20 gibson systemd[1]: Starting Network Time Synchronization...
May 28 15:58:20 gibson systemd[1]: Update is Completed was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd-modules-load[323]: Inserted module 'vboxdrv'
May 28 15:58:20 gibson kernel: input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:2b:00.4/sound/card1/input9
May 28 15:58:20 gibson kernel: input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:2b:00.4/sound/card1/input10
May 28 15:58:20 gibson kernel: input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:2b:00.4/sound/card1/input11
May 28 15:58:20 gibson kernel: input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:2b:00.4/sound/card1/input12
May 28 15:58:20 gibson kernel: input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:2b:00.4/sound/card1/input13
May 28 15:58:20 gibson systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of a failed condition check (ConditionKernelVersion=<5.6).
May 28 15:58:20 gibson systemd[1]: Rebuild Dynamic Linker Cache was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd[1]: Store a System Token in an EFI Variable was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 15:58:20 gibson systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
May 28 15:58:20 gibson systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
May 28 15:58:20 gibson systemd[1]: Rebuild Journal Catalog was skipped because of a failed condition check (ConditionNeedsUpdate=/var).
May 28 15:58:20 gibson systemd[1]: Commit a transient machine-id on disk was skipped because of a failed condition check (ConditionPathIsMountPoint=/etc/machine-id).
May 28 15:58:20 gibson systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
May 28 15:58:20 gibson systemd[1]: Update is Completed was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson systemd-modules-load[323]: Inserted module 'vboxnetadp'
May 28 15:58:20 gibson kernel: VBoxNetAdp: Successfully started.
May 28 15:58:20 gibson systemd-modules-load[323]: Inserted module 'vboxnetflt'
May 28 15:58:20 gibson kernel: VBoxNetFlt: Successfully started.
May 28 15:58:20 gibson systemd[1]: Finished Load Kernel Modules.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd[1]: Starting Apply Kernel Variables...
May 28 15:58:20 gibson systemd[1]: Finished Apply Kernel Variables.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd[1]: Starting CLI Netfilter Manager...
May 28 15:58:20 gibson audit[544]: NETFILTER_CFG table=filter:2 family=2 entries=7 op=nft_register_chain pid=544 comm="iptables-restor"
May 28 15:58:20 gibson audit[544]: SYSCALL arch=c000003e syscall=46 success=yes exit=732 a0=3 a1=7ffd37ed2dc0 a2=0 a3=7ffd37ed2dac items=0 ppid=538 pid=544 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[547]: NETFILTER_CFG table=filter:3 family=2 entries=36 op=nft_register_chain pid=547 comm="iptables-restor"
May 28 15:58:20 gibson audit[547]: SYSCALL arch=c000003e syscall=46 success=yes exit=4440 a0=3 a1=7ffd2e488df0 a2=0 a3=7ffd2e488ddc items=0 ppid=538 pid=547 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[550]: NETFILTER_CFG table=filter:4 family=2 entries=2 op=nft_register_rule pid=550 comm="iptables-restor"
May 28 15:58:20 gibson audit[550]: SYSCALL arch=c000003e syscall=46 success=yes exit=984 a0=3 a1=7ffea8fee4b0 a2=0 a3=7ffea8fee49c items=0 ppid=538 pid=550 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[558]: NETFILTER_CFG table=filter:5 family=2 entries=2 op=nft_register_chain pid=558 comm="iptables-restor"
May 28 15:58:20 gibson audit[558]: SYSCALL arch=c000003e syscall=46 success=yes exit=160 a0=3 a1=7ffd674bf400 a2=0 a3=7ffd674bf3ec items=0 ppid=538 pid=558 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[561]: NETFILTER_CFG table=filter:6 family=2 entries=6 op=nft_register_chain pid=561 comm="iptables-restor"
May 28 15:58:20 gibson audit[561]: SYSCALL arch=c000003e syscall=46 success=yes exit=780 a0=3 a1=7ffcd140ce10 a2=0 a3=7ffcd140cdfc items=0 ppid=538 pid=561 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson systemd-udevd[359]: nvidia: Process '/usr/bin/bash -c 'for i in $(cat /proc/driver/nvidia/gpus/*/information | grep Minor | cut -d \ -f 4); do /usr/bin/mknod -Z -m 666 /dev/nvidia${i} c $(grep nvidia-frontend /proc/devices | cut -d \ -f 1) ${i}; done'' failed with exit code 1.
May 28 15:58:20 gibson systemd[1]: Found device /dev/disk/by-uuid/97089b18-7ec7-4f3e-a125-5902ac147ac7.
May 28 15:58:20 gibson systemd[1]: mdadm-last-resort@md127.timer: Deactivated successfully.
May 28 15:58:20 gibson systemd[1]: Stopped Timer to wait for more drives before activating degraded array md127..
May 28 15:58:20 gibson systemd[1]: Starting MD array monitor...
May 28 15:58:20 gibson systemd[571]: mdmonitor.service: Executable /usr/lib/mdadm/mdadm_env.sh missing, skipping: No such file or directory
May 28 15:58:20 gibson systemd[1]: Starting File System Check on /dev/disk/by-uuid/97089b18-7ec7-4f3e-a125-5902ac147ac7...
May 28 15:58:20 gibson systemd[1]: Started MD array monitor.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mdmonitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson mdadm[573]: mdadm: No mail address or alert command - not monitoring.
May 28 15:58:20 gibson systemd[1]: mdmonitor.service: Main process exited, code=exited, status=1/FAILURE
May 28 15:58:20 gibson audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mdmonitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
May 28 15:58:20 gibson systemd[1]: mdmonitor.service: Failed with result 'exit-code'.
May 28 15:58:20 gibson audit[562]: NETFILTER_CFG table=filter:7 family=2 entries=25 op=nft_register_chain pid=562 comm="iptables-restor"
May 28 15:58:20 gibson audit[562]: SYSCALL arch=c000003e syscall=46 success=yes exit=7696 a0=3 a1=7ffc7a4d9890 a2=0 a3=7ffc7a4d987c items=0 ppid=538 pid=562 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[582]: NETFILTER_CFG table=filter:8 family=2 entries=7 op=nft_register_rule pid=582 comm="iptables-restor"
May 28 15:58:20 gibson audit[582]: SYSCALL arch=c000003e syscall=46 success=yes exit=2724 a0=3 a1=7ffc996f40f0 a2=0 a3=7ffc996f40dc items=0 ppid=538 pid=582 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[585]: NETFILTER_CFG table=filter:9 family=2 entries=8 op=nft_register_chain pid=585 comm="iptables-restor"
May 28 15:58:20 gibson audit[585]: SYSCALL arch=c000003e syscall=46 success=yes exit=504 a0=3 a1=7ffc992b0d70 a2=0 a3=7ffc992b0d5c items=0 ppid=538 pid=585 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson kernel: usb 1-8: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01
May 28 15:58:20 gibson kernel: usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 28 15:58:20 gibson mtp-probe[597]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1"
May 28 15:58:20 gibson mtp-probe[597]: bus: 1, device: 2 was not an MTP device
May 28 15:58:20 gibson kernel: usbcore: registered new device driver apple-mfi-fastcharge
May 28 15:58:20 gibson systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
May 28 15:58:20 gibson systemd-fsck[578]: /dev/md127: clean, 36213/244183040 files, 1724717297/1953447680 blocks
May 28 15:58:20 gibson kernel: usbcore: registered new interface driver usbhid
May 28 15:58:20 gibson kernel: usbhid: USB HID core driver
May 28 15:58:20 gibson audit[586]: NETFILTER_CFG table=filter:10 family=2 entries=22 op=nft_register_rule pid=586 comm="iptables-restor"
May 28 15:58:20 gibson audit[586]: SYSCALL arch=c000003e syscall=46 success=yes exit=10228 a0=3 a1=7fffaee05be0 a2=0 a3=7fffaee05bcc items=0 ppid=538 pid=586 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson mtp-probe[623]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1"
May 28 15:58:20 gibson mtp-probe[623]: bus: 1, device: 2 was not an MTP device
May 28 15:58:20 gibson audit[625]: NETFILTER_CFG table=filter:11 family=2 entries=3 op=nft_register_rule pid=625 comm="iptables-restor"
May 28 15:58:20 gibson audit[625]: SYSCALL arch=c000003e syscall=46 success=yes exit=628 a0=3 a1=7fff435c8360 a2=0 a3=7fff435c834c items=0 ppid=538 pid=625 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=69707461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[627]: NETFILTER_CFG table=filter:12 family=10 entries=7 op=nft_register_chain pid=627 comm="ip6tables-resto"
May 28 15:58:20 gibson audit[627]: SYSCALL arch=c000003e syscall=46 success=yes exit=732 a0=3 a1=7ffc8d57aec0 a2=0 a3=7ffc8d57aeac items=0 ppid=538 pid=627 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[630]: NETFILTER_CFG table=filter:13 family=10 entries=36 op=nft_register_chain pid=630 comm="ip6tables-resto"
May 28 15:58:20 gibson audit[630]: SYSCALL arch=c000003e syscall=46 success=yes exit=4464 a0=3 a1=7ffc1825f4b0 a2=0 a3=7ffc1825f49c items=0 ppid=538 pid=630 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson kernel: input: Keychron Keychron K6 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1/1-1:1.0/0003:05AC:024F.0001/input/input14
May 28 15:58:20 gibson systemd[1]: Finished File System Check on /dev/disk/by-uuid/97089b18-7ec7-4f3e-a125-5902ac147ac7.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-97089b18\x2d7ec7\x2d4f3e\x2da125\x2d5902ac147ac7 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson audit[632]: NETFILTER_CFG table=filter:14 family=10 entries=2 op=nft_register_rule pid=632 comm="ip6tables-resto"
May 28 15:58:20 gibson audit[632]: SYSCALL arch=c000003e syscall=46 success=yes exit=984 a0=3 a1=7ffc57e336e0 a2=0 a3=7ffc57e336cc items=0 ppid=538 pid=632 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[636]: NETFILTER_CFG table=filter:15 family=10 entries=2 op=nft_register_chain pid=636 comm="ip6tables-resto"
May 28 15:58:20 gibson audit[636]: SYSCALL arch=c000003e syscall=46 success=yes exit=160 a0=3 a1=7ffd150f2300 a2=0 a3=7ffd150f22ec items=0 ppid=538 pid=636 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[639]: NETFILTER_CFG table=filter:16 family=10 entries=6 op=nft_register_chain pid=639 comm="ip6tables-resto"
May 28 15:58:20 gibson audit[639]: SYSCALL arch=c000003e syscall=46 success=yes exit=780 a0=3 a1=7ffd4b05a580 a2=0 a3=7ffd4b05a56c items=0 ppid=538 pid=639 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson kernel: apple 0003:05AC:024F.0001: input,hidraw0: USB HID v1.11 Keyboard [Keychron Keychron K6] on usb-0000:03:00.0-1/input0
May 28 15:58:20 gibson kernel: apple 0003:05AC:024F.0002: Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling
May 28 15:58:20 gibson kernel: input: Keychron Keychron K6 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1/1-1:1.1/0003:05AC:024F.0002/input/input15
May 28 15:58:20 gibson kernel: Bluetooth: Core ver 2.22
May 28 15:58:20 gibson kernel: NET: Registered PF_BLUETOOTH protocol family
May 28 15:58:20 gibson kernel: Bluetooth: HCI device and connection manager initialized
May 28 15:58:20 gibson kernel: Bluetooth: HCI socket layer initialized
May 28 15:58:20 gibson kernel: Bluetooth: L2CAP socket layer initialized
May 28 15:58:20 gibson kernel: Bluetooth: SCO socket layer initialized
May 28 15:58:20 gibson audit[640]: NETFILTER_CFG table=filter:17 family=10 entries=65 op=nft_register_rule pid=640 comm="ip6tables-resto"
May 28 15:58:20 gibson audit[640]: SYSCALL arch=c000003e syscall=46 success=yes exit=25484 a0=3 a1=7fff9db0bc90 a2=0 a3=7fff9db0bc7c items=0 ppid=538 pid=640 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[650]: NETFILTER_CFG table=filter:18 family=10 entries=6 op=nft_register_rule pid=650 comm="ip6tables-resto"
May 28 15:58:20 gibson audit[650]: SYSCALL arch=c000003e syscall=46 success=yes exit=2496 a0=3 a1=7fff84f6d420 a2=0 a3=7fff84f6d40c items=0 ppid=538 pid=650 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[653]: NETFILTER_CFG table=filter:19 family=10 entries=8 op=nft_register_chain pid=653 comm="ip6tables-resto"
May 28 15:58:20 gibson audit[653]: SYSCALL arch=c000003e syscall=46 success=yes exit=512 a0=3 a1=7ffeb1ed5820 a2=0 a3=7ffeb1ed580c items=0 ppid=538 pid=653 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[654]: NETFILTER_CFG table=filter:20 family=10 entries=8 op=nft_register_rule pid=654 comm="ip6tables-resto"
May 28 15:58:20 gibson audit[654]: SYSCALL arch=c000003e syscall=46 success=yes exit=3144 a0=3 a1=7ffd6c382110 a2=0 a3=7ffd6c3820fc items=0 ppid=538 pid=654 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson audit[657]: NETFILTER_CFG table=filter:21 family=10 entries=3 op=nft_register_rule pid=657 comm="ip6tables-resto"
May 28 15:58:20 gibson audit[657]: SYSCALL arch=c000003e syscall=46 success=yes exit=632 a0=3 a1=7ffd43ccb280 a2=0 a3=7ffd43ccb26c items=0 ppid=538 pid=657 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=6970367461626C65732D726573746F7265002D6E
May 28 15:58:20 gibson systemd[1]: Finished CLI Netfilter Manager.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ufw comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson kernel: apple 0003:05AC:024F.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Keychron Keychron K6] on usb-0000:03:00.0-1/input1
May 28 15:58:20 gibson kernel: mousedev: PS/2 mouse device common for all mice
May 28 15:58:20 gibson kernel: usbcore: registered new interface driver btusb
May 28 15:58:20 gibson systemd[1]: Starting Load/Save RF Kill Switch Status...
May 28 15:58:20 gibson systemd[1]: Reached target Bluetooth Support.
May 28 15:58:20 gibson systemd[1]: Started Load/Save RF Kill Switch Status.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson kernel: Bluetooth: hci0: Legacy ROM 2.x revision 5.0 build 25 week 20 2015
May 28 15:58:20 gibson kernel: Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
May 28 15:58:20 gibson systemd[1]: Mounting /home/chris/plex...
May 28 15:58:20 gibson systemd[1]: Mounting Arbitrary Executable File Formats File System...
May 28 15:58:20 gibson systemd[1]: Mounted Arbitrary Executable File Formats File System.
May 28 15:58:20 gibson systemd[1]: Finished Set Up Additional Binary Formats.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd[1]: Started Network Time Synchronization.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd[1]: Reached target System Initialization.
May 28 15:58:20 gibson systemd[1]: Started Daily rotation of log files.
May 28 15:58:20 gibson systemd[1]: Started Daily man-db regeneration.
May 28 15:58:20 gibson systemd[1]: Started Daily verification of password and group files.
May 28 15:58:20 gibson systemd[1]: Started Daily Cleanup of Temporary Directories.
May 28 15:58:20 gibson systemd[1]: Started Daily locate database update.
May 28 15:58:20 gibson systemd[1]: Reached target Timer Units.
May 28 15:58:20 gibson systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
May 28 15:58:20 gibson systemd[1]: Listening on D-Bus System Message Bus Socket.
May 28 15:58:20 gibson systemd[1]: Reached target Socket Units.
May 28 15:58:20 gibson systemd[1]: Reached target Basic System.
May 28 15:58:20 gibson systemd[1]: Starting Save/Restore Sound Card State...
May 28 15:58:20 gibson systemd[1]: Manage Sound Card State (restore and store) was skipped because of a failed condition check (ConditionPathExists=/etc/alsa/state-daemon.conf).
May 28 15:58:20 gibson systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
May 28 15:58:20 gibson systemd[1]: Started Periodic Command Scheduler.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cronie comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd[1]: Starting D-Bus System Message Bus...
May 28 15:58:20 gibson systemd[1]: Starting IPv4 Packet Filtering Framework...
May 28 15:58:20 gibson systemd[1]: Starting Initialize hardware monitoring sensors...
May 28 15:58:20 gibson crond[673]: (CRON) STARTUP (1.6.1)
May 28 15:58:20 gibson crond[673]: (CRON) INFO (Syslog will be used instead of sendmail.)
May 28 15:58:20 gibson crond[673]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 57% if used.)
May 28 15:58:20 gibson systemd[1]: SSH Key Generation was skipped because all trigger condition checks failed.
May 28 15:58:20 gibson crond[673]: (CRON) INFO (running with inotify support)
May 28 15:58:20 gibson audit: BPF prog-id=17 op=LOAD
May 28 15:58:20 gibson audit: BPF prog-id=18 op=LOAD
May 28 15:58:20 gibson audit: BPF prog-id=19 op=LOAD
May 28 15:58:20 gibson systemd[1]: Starting User Login Management...
May 28 15:58:20 gibson systemd[1]: Finished Save/Restore Sound Card State.
May 28 15:58:20 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:20 gibson systemd[1]: Reached target Sound Card.
May 28 15:58:20 gibson audit[675]: NETFILTER_CFG table=filter:22 family=2 entries=114 op=nft_register_chain pid=675 comm="iptables-restor"
May 28 15:58:20 gibson audit[675]: NETFILTER_CFG table=filter:22 family=2 entries=115 op=nft_unregister_table pid=675 comm="iptables-restor"
May 28 15:58:20 gibson audit[675]: SYSCALL arch=c000003e syscall=46 success=yes exit=29052 a0=4 a1=7ffedca05a20 a2=0 a3=7ffedca05a0c items=0 ppid=1 pid=675 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=2F7573722F62696E2F69707461626C65732D726573746F7265002F6574632F69707461626C65732F69707461626C65732E72756C6573
May 28 15:58:21 gibson systemd[1]: Found device Portable 1.
May 28 15:58:21 gibson systemd[1]: Starting File System Check on /dev/disk/by-uuid/c9de160f-65d2-43d6-a744-59e2f3e1b115...
May 28 15:58:21 gibson avahi-daemon[672]: Found user 'avahi' (UID 976) and group 'avahi' (GID 976).
May 28 15:58:21 gibson avahi-daemon[672]: Successfully dropped root privileges.
May 28 15:58:21 gibson avahi-daemon[672]: avahi-daemon 0.8 starting up.
May 28 15:58:21 gibson kernel: nct6775: Found NCT6795D or compatible chip at 0x4e:0xa20
May 28 15:58:21 gibson systemd-logind[677]: New seat seat0.
May 28 15:58:21 gibson systemd-logind[677]: Watching system buttons on /dev/input/event1 (Power Button)
May 28 15:58:21 gibson systemd-logind[677]: Watching system buttons on /dev/input/event0 (Power Button)
May 28 15:58:21 gibson systemd-logind[677]: Watching system buttons on /dev/input/event14 (Keychron Keychron K6)
May 28 15:58:21 gibson systemd-logind[677]: Watching system buttons on /dev/input/event15 (Keychron Keychron K6)
May 28 15:58:21 gibson systemd[1]: Finished Initialize hardware monitoring sensors.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lm_sensors comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson kernel: EXT4-fs (md127): mounted filesystem with ordered data mode. Quota mode: none.
May 28 15:58:21 gibson systemd[1]: Mounted /home/chris/plex.
May 28 15:58:21 gibson audit[678]: USER_ACCT pid=678 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_time acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
May 28 15:58:20 gibson audit[675]: NETFILTER_CFG table=nat:23 family=2 entries=9 op=nft_register_chain pid=675 comm="iptables-restor"
May 28 15:58:20 gibson audit[675]: SYSCALL arch=c000003e syscall=46 success=yes exit=896 a0=4 a1=7ffedca05a20 a2=0 a3=55ad3b3523d0 items=0 ppid=1 pid=675 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:20 gibson audit: PROCTITLE proctitle=2F7573722F62696E2F69707461626C65732D726573746F7265002F6574632F69707461626C65732F69707461626C65732E72756C6573
May 28 15:58:21 gibson audit[678]: CRED_ACQ pid=678 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
May 28 15:58:21 gibson audit[678]: SYSCALL arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7fffa2b3e680 a2=1 a3=7fffa2b3e397 items=0 ppid=673 pid=678 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="crond" exe="/usr/bin/crond" key=(null)
May 28 15:58:21 gibson audit: PROCTITLE proctitle=2F7573722F62696E2F63726F6E64002D6E
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=iptables comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson systemd[1]: Finished IPv4 Packet Filtering Framework.
May 28 15:58:21 gibson systemd[1]: Starting IPv6 Packet Filtering Framework...
May 28 15:58:21 gibson audit[697]: NETFILTER_CFG table=filter:24 family=10 entries=7 op=nft_register_chain pid=697 comm="ip6tables-resto"
May 28 15:58:21 gibson audit[697]: NETFILTER_CFG table=filter:24 family=10 entries=140 op=nft_unregister_table pid=697 comm="ip6tables-resto"
May 28 15:58:21 gibson audit[697]: SYSCALL arch=c000003e syscall=46 success=yes exit=764 a0=4 a1=7ffdd93f9970 a2=0 a3=7ffdd93f995c items=0 ppid=1 pid=697 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/bin/xtables-nft-multi" key=(null)
May 28 15:58:21 gibson audit: PROCTITLE proctitle=2F7573722F62696E2F6970367461626C65732D726573746F7265002F6574632F69707461626C65732F6970367461626C65732E72756C6573
May 28 15:58:21 gibson systemd[1]: Finished IPv6 Packet Filtering Framework.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ip6tables comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson systemd[1]: Reached target Preparation for Network.
May 28 15:58:21 gibson crond[678]: pam_unix(crond:session): session opened for user root(uid=0) by (uid=0)
May 28 15:58:21 gibson audit[678]: USER_START pid=678 uid=0 auid=0 ses=1 msg='op=PAM:session_open grantors=pam_loginuid,pam_limits,pam_unix acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
May 28 15:58:21 gibson audit[678]: CRED_REFR pid=678 uid=0 auid=0 ses=1 msg='op=PAM:setcred grantors=pam_unix,pam_env acct="root" exe="/usr/bin/crond" hostname=? addr=? terminal=cron res=success'
May 28 15:58:21 gibson CROND[698]: (root) CMD (/root/qbscript)
May 28 15:58:21 gibson systemd[1]: Started D-Bus System Message Bus.
May 28 15:58:21 gibson avahi-daemon[672]: Successfully called chroot().
May 28 15:58:21 gibson avahi-daemon[672]: Successfully dropped remaining capabilities.
May 28 15:58:21 gibson avahi-daemon[672]: No service file found in /etc/avahi/services.
May 28 15:58:21 gibson avahi-daemon[672]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson avahi-daemon[672]: New relevant interface lo.IPv6 for mDNS.
May 28 15:58:21 gibson avahi-daemon[672]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
May 28 15:58:21 gibson avahi-daemon[672]: New relevant interface lo.IPv4 for mDNS.
May 28 15:58:21 gibson avahi-daemon[672]: Network interface enumeration completed.
May 28 15:58:21 gibson avahi-daemon[672]: Registering new address record for ::1 on lo.*.
May 28 15:58:21 gibson avahi-daemon[672]: Registering new address record for 127.0.0.1 on lo.IPv4.
May 28 15:58:21 gibson dbus-daemon[674]: [system] Successfully activated service 'org.freedesktop.systemd1'
May 28 15:58:21 gibson systemd[1]: Starting Network Manager...
May 28 15:58:21 gibson systemd[1]: Started User Login Management.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=avahi-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson systemd[1]: Started Avahi mDNS/DNS-SD Stack.
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.0719] NetworkManager (version 1.38.0-1) is starting... (for the first time)
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.0719] Read config: /etc/NetworkManager/NetworkManager.conf (lib: 20-connectivity.conf)
May 28 15:58:21 gibson systemd[1]: Started Network Manager.
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.0735] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson systemd[1]: Reached target Network.
May 28 15:58:21 gibson systemd[1]: Starting Network Manager Wait Online...
May 28 15:58:21 gibson systemd[1]: Starting Network Time Service...
May 28 15:58:21 gibson systemd[1]: Started PyMedusa Daemon.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pymedusa comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson systemd[1]: Started OpenSSH Daemon.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson systemd[1]: Starting Permit User Sessions...
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.0781] manager[0x56084c3ae020]: monitoring kernel firmware directory '/lib/firmware'.
May 28 15:58:21 gibson systemd[1]: Finished Permit User Sessions.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson dbus-daemon[674]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.4' (uid=0 pid=702 comm="/usr/bin/NetworkManager --no-daemon")
May 28 15:58:21 gibson systemd[1]: Started Getty on tty1.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson audit: BPF prog-id=20 op=LOAD
May 28 15:58:21 gibson audit: BPF prog-id=21 op=LOAD
May 28 15:58:21 gibson audit: BPF prog-id=22 op=LOAD
May 28 15:58:21 gibson systemd[1]: Reached target Login Prompts.
May 28 15:58:21 gibson systemd[1]: Starting Hostname Service...
May 28 15:58:21 gibson ntpd[706]: ntpd 4.2.8p15@1.3728-o Wed Jul 1 17:02:17 UTC 2020 (1): Starting
May 28 15:58:21 gibson ntpd[706]: Command line: /usr/bin/ntpd -g -u ntp:ntp
May 28 15:58:21 gibson ntpd[706]: ----------------------------------------------------
May 28 15:58:21 gibson ntpd[706]: ntp-4 is maintained by Network Time Foundation,
May 28 15:58:21 gibson ntpd[706]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
May 28 15:58:21 gibson ntpd[706]: corporation. Support and training for ntp-4 are
May 28 15:58:21 gibson ntpd[706]: available at https://www.nwtime.org/support
May 28 15:58:21 gibson ntpd[706]: ----------------------------------------------------
May 28 15:58:21 gibson sshd[708]: Server listening on 0.0.0.0 port 22.
May 28 15:58:21 gibson systemd-fsck[696]: /dev/sdd1: clean, 2438/61054976 files, 41193954/244190385 blocks
May 28 15:58:21 gibson dbus-daemon[674]: [system] Successfully activated service 'org.freedesktop.hostname1'
May 28 15:58:21 gibson systemd[1]: Started Hostname Service.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1078] hostname: hostname: using hostnamed
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1079] hostname: static hostname changed from (none) to "gibson"
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1082] dns-mgr[0x56084c38e2a0]: init: dns=default,systemd-resolved rc-manager=symlink
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1086] manager[0x56084c3ae020]: rfkill: Wi-Fi hardware radio set enabled
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1086] manager[0x56084c3ae020]: rfkill: WWAN hardware radio set enabled
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1130] Loaded device plugin: NMOvsFactory (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-ovs.so)
May 28 15:58:21 gibson ntpd[717]: proto: precision = 0.040 usec (-24)
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1137] Loaded device plugin: NMAtmManager (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-adsl.so)
May 28 15:58:21 gibson ntpd[717]: basedate set to 2020-06-19
May 28 15:58:21 gibson ntpd[717]: gps base set to 2020-06-21 (week 2111)
May 28 15:58:21 gibson ntpd[717]: Listen and drop on 0 v6wildcard [::]:123
May 28 15:58:21 gibson ntpd[717]: Listen and drop on 1 v4wildcard 0.0.0.0:123
May 28 15:58:21 gibson ntpd[717]: Listen normally on 2 lo 127.0.0.1:123
May 28 15:58:21 gibson ntpd[717]: Listen normally on 3 lo [::1]:123
May 28 15:58:21 gibson ntpd[717]: Listening on routing socket on fd #20 for interface updates
May 28 15:58:21 gibson ntpd[717]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
May 28 15:58:21 gibson ntpd[717]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
May 28 15:58:21 gibson systemd[1]: Started Network Time Service.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ntpd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1239] Loaded device plugin: NMTeamFactory (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-team.so)
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1278] Loaded device plugin: NMWwanFactory (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-wwan.so)
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1291] Loaded device plugin: NMBluezManager (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-bluetooth.so)
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1307] Loaded device plugin: NMWifiFactory (/usr/lib/NetworkManager/1.38.0-1/libnm-device-plugin-wifi.so)
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1309] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1309] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1309] manager: Networking is enabled by state file
May 28 15:58:21 gibson dbus-daemon[674]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.4' (uid=0 pid=702 comm="/usr/bin/NetworkManager --no-daemon")
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1317] settings: Loaded settings plugin: keyfile (internal)
May 28 15:58:21 gibson systemd[1]: Starting Network Manager Script Dispatcher Service...
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1332] dhcp-init: Using DHCP client 'internal'
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1332] device (lo): carrier: link connected
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1334] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/1)
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1340] manager: (enp37s0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.1342] device (enp37s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
May 28 15:58:21 gibson dbus-daemon[674]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
May 28 15:58:21 gibson systemd[1]: Started Network Manager Script Dispatcher Service.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson systemd[1]: Finished File System Check on /dev/disk/by-uuid/c9de160f-65d2-43d6-a744-59e2f3e1b115.
May 28 15:58:21 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-c9de160f\x2d65d2\x2d43d6\x2da744\x2d59e2f3e1b115 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:21 gibson systemd[1]: Mounting /run/timeshift/backup...
May 28 15:58:21 gibson kernel: Generic FE-GE Realtek PHY r8169-0-2500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-2500:00, irq=MAC)
May 28 15:58:21 gibson kernel: EXT4-fs (sdd1): mounted filesystem with ordered data mode. Quota mode: none.
May 28 15:58:21 gibson systemd[1]: Mounted /run/timeshift/backup.
May 28 15:58:21 gibson kernel: r8169 0000:25:00.0 enp37s0: Link is Down
May 28 15:58:21 gibson NetworkManager[702]: <info> [1653778701.3357] ovsdb: disconnected from ovsdb
May 28 15:58:22 gibson avahi-daemon[672]: Server startup complete. Host name is gibson.local. Local service cookie is 2219105906.
May 28 15:58:22 gibson kernel: Bluetooth: hci0: Intel BT fw patch 0x43 completed & activated
May 28 15:58:24 gibson kernel: r8169 0000:25:00.0 enp37s0: Link is Up - 1Gbps/Full - flow control rx/tx
May 28 15:58:24 gibson kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp37s0: link becomes ready
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.2734] device (enp37s0): carrier: link connected
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.2735] device (enp37s0): state change: unavailable -> disconnected (reason 'carrier-changed', sys-iface-state: 'managed')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.2738] policy: auto-activating connection 'Wired connection 1' (e0c7eed2-4613-3dd6-8345-f113f2980122)
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.2740] device (enp37s0): Activation: starting connection 'Wired connection 1' (e0c7eed2-4613-3dd6-8345-f113f2980122)
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.2741] device (enp37s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.2742] manager: NetworkManager state is now CONNECTING
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.2743] device (enp37s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.2746] device (enp37s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.2748] dhcp4 (enp37s0): activation: beginning transaction (timeout in 45 seconds)
May 28 15:58:24 gibson avahi-daemon[672]: Joining mDNS multicast group on interface enp37s0.IPv6 with address fe80::6cd9:d662:2:2a59.
May 28 15:58:24 gibson avahi-daemon[672]: New relevant interface enp37s0.IPv6 for mDNS.
May 28 15:58:24 gibson avahi-daemon[672]: Registering new address record for fe80::6cd9:d662:2:2a59 on enp37s0.*.
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.3045] dhcp4 (enp37s0): state changed new lease, address=192.168.0.10
May 28 15:58:24 gibson avahi-daemon[672]: Joining mDNS multicast group on interface enp37s0.IPv4 with address 192.168.0.10.
May 28 15:58:24 gibson avahi-daemon[672]: New relevant interface enp37s0.IPv4 for mDNS.
May 28 15:58:24 gibson avahi-daemon[672]: Registering new address record for 192.168.0.10 on enp37s0.IPv4.
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.3057] device (enp37s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.3071] device (enp37s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.3072] device (enp37s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.3075] manager: NetworkManager state is now CONNECTED_LOCAL
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.3078] manager: NetworkManager state is now CONNECTED_SITE
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.3079] policy: set 'Wired connection 1' (enp37s0) as default for IPv4 routing and DNS
May 28 15:58:24 gibson dbus-daemon[674]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.4' (uid=0 pid=702 comm="/usr/bin/NetworkManager --no-daemon")
May 28 15:58:24 gibson dbus-daemon[674]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.3118] device (enp37s0): Activation: successful, device activated.
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.3123] manager: NetworkManager state is now CONNECTED_GLOBAL
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.3126] manager: startup complete
May 28 15:58:24 gibson systemd[1]: Finished Network Manager Wait Online.
May 28 15:58:24 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:24 gibson systemd[1]: Reached target Network is Online.
May 28 15:58:24 gibson kernel: kauditd_printk_skb: 111 callbacks suppressed
May 28 15:58:24 gibson kernel: audit: type=1130 audit(1653778704.313:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:24 gibson systemd[1]: Started Mullvad VPN daemon.
May 28 15:58:24 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mullvad-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:24 gibson kernel: audit: type=1130 audit(1653778704.315:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mullvad-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:24 gibson systemd[1]: Started Plex Media Server.
May 28 15:58:24 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plexmediaserver comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:24 gibson kernel: audit: type=1130 audit(1653778704.319:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plexmediaserver comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:24 gibson systemd[1]: Started qBittorrent-nox service.
May 28 15:58:24 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=qbittorrent-nox comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:24 gibson systemd[1]: Reached target Multi-User System.
May 28 15:58:24 gibson systemd[1]: Reached target Graphical Interface.
May 28 15:58:24 gibson systemd[1]: Startup finished in 19.179s (firmware) + 3.331s (loader) + 2.528s (kernel) + 4.520s (userspace) = 29.559s.
May 28 15:58:24 gibson kernel: audit: type=1130 audit(1653778704.320:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=qbittorrent-nox comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon::version][INFO] Starting mullvad-daemon - 2022.1 2022-03-01
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon][INFO] Logging to /var/log/mullvad-vpn
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon::rpc_uniqueness_check][DEBUG] Failed to locate/connect to another daemon instance, assuming there isn't one
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon][INFO] Management interface listening on /var/run/mullvad-vpn
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon::settings][INFO] Loading settings from /etc/mullvad-vpn/settings.json
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon][INFO] Automatically connecting since auto-connect is turned on
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_rpc::address_cache][DEBUG] Loading API addresses from /var/cache/mullvad-vpn/api-ip-address.txt
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_rpc::address_cache][DEBUG] Using API address: 91.90.44.10:444
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_rpc::availability][DEBUG] Suspending API requests
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_rpc::availability][DEBUG] Resuming API requests due to coming online
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon::relays][DEBUG] Reading relays from /var/cache/mullvad-vpn/relays.json
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon::relays][DEBUG] Reading relays from /opt/mullvad-vpn-cli/relays.json
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon::relays][INFO] Initialized with 841 cached relays from 2022-05-23 21:23:51.528
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon::version_check][DEBUG] Loading version check cache from /var/cache/mullvad-vpn/version-info.json
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon::account_history][INFO] Opening account history file in /etc/mullvad-vpn/account-history.json
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_rpc::availability][DEBUG] Pausing background API requests
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon][INFO] Account already has WireGuard key
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon::wireguard][DEBUG] Starting automatic key rotation job
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_rpc::availability][DEBUG] Unsuspending API requests
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_rpc::availability][DEBUG] Resuming background API requests
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon::relays][INFO] Selected relay us182-wireguard at 198.54.131.162
May 28 15:58:24 gibson mullvad-daemon[747]: [talpid_core::firewall][INFO] Applying firewall policy: Connecting to 198.54.131.162:16409 over UDP, Allowing LAN, interface: none
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle6:25 family=10 entries=5 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle6:25 family=10 entries=2 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle4:25 family=2 entries=5 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle4:25 family=2 entries=2 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvad:25 family=1 entries=82 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvad:25 family=1 entries=2 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[747]: SYSCALL arch=c000003e syscall=44 success=yes exit=37500 a0=10 a1=7fb70c004320 a2=927c a3=0 items=0 ppid=1 pid=747 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="tokio-runtime-w" exe="/opt/mullvad-vpn-cli/mullvad-daemon" key=(null)
May 28 15:58:24 gibson audit: PROCTITLE proctitle=2F6F70742F6D756C6C7661642D76706E2D636C692F6D756C6C7661642D6461656D6F6E002D76002D2D64697361626C652D7374646F75742D74696D657374616D7073
May 28 15:58:24 gibson kernel: audit: type=1325 audit(1653778704.434:76): table=mullvadmangle6:25 family=10 entries=5 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson kernel: audit: type=1325 audit(1653778704.434:76): table=mullvadmangle6:25 family=10 entries=2 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson kernel: audit: type=1325 audit(1653778704.434:76): table=mullvadmangle4:25 family=2 entries=5 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson kernel: audit: type=1325 audit(1653778704.434:76): table=mullvadmangle4:25 family=2 entries=2 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson kernel: audit: type=1325 audit(1653778704.434:76): table=mullvad:25 family=1 entries=82 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson kernel: audit: type=1325 audit(1653778704.434:76): table=mullvad:25 family=1 entries=2 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson dbus-daemon[674]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.8' (uid=0 pid=747 comm="/opt/mullvad-vpn-cli/mullvad-daemon -v --disable-s")
May 28 15:58:24 gibson dbus-daemon[674]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
May 28 15:58:24 gibson mullvad-daemon[747]: [talpid_core::tunnel::wireguard][DEBUG] Using kernel WireGuard implementation
May 28 15:58:24 gibson kernel: wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
May 28 15:58:24 gibson kernel: wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.5514] manager: (wg-mullvad): new WireGuard device (/org/freedesktop/NetworkManager/Devices/3)
May 28 15:58:24 gibson mullvad-daemon[747]: [talpid_core::firewall][INFO] Applying firewall policy: Connecting to 198.54.131.162:16409 over UDP over "wg-mullvad" (ip: 10.106.84.10, v4 gw: 10.64.0.1, v6 gw: None), Allowing LAN
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon][DEBUG] New tunnel state: Connecting { endpoint: TunnelEndpoint { endpoint: Endpoint { address: 198.54.131.162:16409, protocol: Udp }, tunnel_type: Wireguard, proxy: None, entry_endpoint: None }, location: Some(GeoIpLocation { ipv4: None, ipv6: None, country: "USA", city: Some("Seattle, WA"), latitude: 47.608013, longitude: -122.335167, mullvad_exit_ip: true, hostname: Some("us182-wireguard"), bridge_hostname: None, entry_hostname: None }) }
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle6:26 family=10 entries=5 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle6:26 family=10 entries=5 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle4:26 family=2 entries=5 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle4:26 family=2 entries=5 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvad:26 family=1 entries=87 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvad:26 family=1 entries=82 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[747]: SYSCALL arch=c000003e syscall=44 success=yes exit=38620 a0=13 a1=7fb70c0375d0 a2=96dc a3=0 items=0 ppid=1 pid=747 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="tokio-runtime-w" exe="/opt/mullvad-vpn-cli/mullvad-daemon" key=(null)
May 28 15:58:24 gibson audit: PROCTITLE proctitle=2F6F70742F6D756C6C7661642D76706E2D636C692F6D756C6C7661642D6461656D6F6E002D76002D2D64697361626C652D7374646F75742D74696D657374616D7073
May 28 15:58:24 gibson mullvad-daemon[747]: [talpid_core::routing::imp::imp][DEBUG] Adding routes: {RequiredRoute { prefix: V4(Ipv4Network { addr: 10.64.0.1, prefix: 32 }), node: RealNode(Node { ip: None, device: Some("wg-mullvad") }), table_id: 254 }, RequiredRoute { prefix: V4(Ipv4Network { addr: 0.0.0.0, prefix: 0 }), node: RealNode(Node { ip: None, device: Some("wg-mullvad") }), table_id: 1836018789 }}
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.5551] device (wg-mullvad): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.5554] device (wg-mullvad): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.5558] device (wg-mullvad): Activation: starting connection 'wg-mullvad' (2a5a5231-a30a-4f31-ac43-1f6bf40c6042)
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.5559] device (wg-mullvad): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.5560] device (wg-mullvad): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.5561] device (wg-mullvad): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.5562] device (wg-mullvad): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.5570] device (wg-mullvad): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.5571] device (wg-mullvad): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
May 28 15:58:24 gibson NetworkManager[702]: <info> [1653778704.5574] device (wg-mullvad): Activation: successful, device activated.
May 28 15:58:24 gibson mullvad-daemon[747]: [talpid_core::firewall][INFO] Applying firewall policy: Connected to 198.54.131.162:16409 over UDP over "wg-mullvad" (ip: 10.106.84.10, v4 gw: 10.64.0.1, v6 gw: None), Allowing LAN
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle6:27 family=10 entries=6 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle6:27 family=10 entries=5 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle4:27 family=2 entries=8 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvadmangle4:27 family=2 entries=5 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvad:27 family=1 entries=90 op=nft_register_chain pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[760]: NETFILTER_CFG table=mullvad:27 family=1 entries=87 op=nft_unregister_table pid=760 comm="tokio-runtime-w"
May 28 15:58:24 gibson audit[747]: SYSCALL arch=c000003e syscall=44 success=yes exit=41244 a0=13 a1=7fb70c0375d0 a2=a11c a3=0 items=0 ppid=1 pid=747 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="tokio-runtime-w" exe="/opt/mullvad-vpn-cli/mullvad-daemon" key=(null)
May 28 15:58:24 gibson audit: PROCTITLE proctitle=2F6F70742F6D756C6C7661642D76706E2D636C692F6D756C6C7661642D6461656D6F6E002D76002D2D64697361626C652D7374646F75742D74696D657374616D7073
May 28 15:58:24 gibson mullvad-daemon[747]: [talpid_core::dns][INFO] Setting DNS servers to 10.64.0.1
May 28 15:58:24 gibson dbus-daemon[674]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.8' (uid=0 pid=747 comm="/opt/mullvad-vpn-cli/mullvad-daemon -v --disable-s")
May 28 15:58:24 gibson dbus-daemon[674]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
May 28 15:58:24 gibson mullvad-daemon[747]: [talpid_core::dns::imp::static_resolv_conf][DEBUG] No DNS state backup to restore
May 28 15:58:24 gibson mullvad-daemon[747]: [talpid_core::dns::imp][DEBUG] Managing DNS via /etc/resolv.conf
May 28 15:58:24 gibson mullvad-daemon[747]: [mullvad_daemon][DEBUG] New tunnel state: Connected { endpoint: TunnelEndpoint { endpoint: Endpoint { address: 198.54.131.162:16409, protocol: Udp }, tunnel_type: Wireguard, proxy: None, entry_endpoint: None }, location: Some(GeoIpLocation { ipv4: None, ipv6: None, country: "USA", city: Some("Seattle, WA"), latitude: 47.608013, longitude: -122.335167, mullvad_exit_ip: true, hostname: Some("us182-wireguard"), bridge_hostname: None, entry_hostname: None }) }
May 28 15:58:25 gibson systemd[1]: Stopping qBittorrent-nox service...
May 28 15:58:25 gibson qbittorrent-nox[749]: Catching signal: SIGTERM
May 28 15:58:25 gibson qbittorrent-nox[749]: Exiting cleanly
May 28 15:58:25 gibson qbittorrent-nox[749]: ******** Information ********
May 28 15:58:25 gibson qbittorrent-nox[749]: To control qBittorrent, access the WebUI at: https://localhost:9999
May 28 15:58:25 gibson kernel: [UFW BLOCK] IN=wg-mullvad OUT= MAC= SRC=10.106.84.10 DST=239.0.0.250 LEN=273 TOS=0x00 PREC=0x00 TTL=1 ID=53158 DF PROTO=UDP SPT=32414 DPT=32415 LEN=253
May 28 15:58:25 gibson kernel: [UFW BLOCK] IN=wg-mullvad OUT= MAC= SRC=10.106.84.10 DST=239.255.255.250 LEN=273 TOS=0x00 PREC=0x00 TTL=1 ID=5354 DF PROTO=UDP SPT=32410 DPT=32411 LEN=253
May 28 15:58:25 gibson kernel: [UFW BLOCK] IN=wg-mullvad OUT= MAC= SRC=10.106.84.10 DST=239.0.0.250 LEN=282 TOS=0x00 PREC=0x00 TTL=1 ID=53175 DF PROTO=UDP SPT=32414 DPT=32415 LEN=262
May 28 15:58:25 gibson systemd[1]: systemd-rfkill.service: Deactivated successfully.
May 28 15:58:25 gibson audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:27 gibson mullvad-daemon[747]: [mullvad_rpc::availability][DEBUG] Resuming background API requests
May 28 15:58:27 gibson ntpd[717]: Listen normally on 4 enp37s0 192.168.0.10:123
May 28 15:58:27 gibson ntpd[717]: Listen normally on 5 wg-mullvad 10.106.84.10:123
May 28 15:58:27 gibson ntpd[717]: Listen normally on 6 enp37s0 [fe80::6cd9:d662:2:2a59%2]:123
May 28 15:58:27 gibson ntpd[717]: new interface(s) found: waking up resolver
May 28 15:58:27 gibson systemd[1]: qbittorrent-nox.service: Deactivated successfully.
May 28 15:58:27 gibson systemd[1]: Stopped qBittorrent-nox service.
May 28 15:58:27 gibson audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=qbittorrent-nox comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:27 gibson NetworkManager[702]: <info> [1653778707.8442] dhcp6 (enp37s0): activation: beginning transaction (timeout in 45 seconds)
May 28 15:58:27 gibson avahi-daemon[672]: Leaving mDNS multicast group on interface enp37s0.IPv6 with address fe80::6cd9:d662:2:2a59.
May 28 15:58:27 gibson avahi-daemon[672]: Joining mDNS multicast group on interface enp37s0.IPv6 with address fd00:bc3e:70e:88c2:8ef2:6e19:94a0:3ff7.
May 28 15:58:27 gibson avahi-daemon[672]: Registering new address record for fd00:bc3e:70e:88c2:8ef2:6e19:94a0:3ff7 on enp37s0.*.
May 28 15:58:27 gibson avahi-daemon[672]: Withdrawing address record for fe80::6cd9:d662:2:2a59 on enp37s0.
May 28 15:58:28 gibson systemd[1]: Started qBittorrent-nox service.
May 28 15:58:28 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=qbittorrent-nox comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:29 gibson ntpd[717]: bind(26) AF_INET6 fd00:bc3e:70e:88c2:8ef2:6e19:94a0:3ff7#123 flags 0x11 failed: Cannot assign requested address
May 28 15:58:29 gibson ntpd[717]: unable to create socket on enp37s0 (7) for fd00:bc3e:70e:88c2:8ef2:6e19:94a0:3ff7#123
May 28 15:58:29 gibson ntpd[717]: failed to init interface for address fd00:bc3e:70e:88c2:8ef2:6e19:94a0:3ff7
May 28 15:58:31 gibson ntpd[717]: Listen normally on 8 enp37s0 [fd00:bc3e:70e:88c2:8ef2:6e19:94a0:3ff7]:123
May 28 15:58:31 gibson ntpd[717]: new interface(s) found: waking up resolver
May 28 15:58:31 gibson systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
May 28 15:58:31 gibson audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:31 gibson kernel: kauditd_printk_skb: 21 callbacks suppressed
May 28 15:58:31 gibson kernel: audit: type=1131 audit(1653778711.144:82): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:32 gibson mullvad-daemon[747]: [mullvad_daemon::relays::updater][DEBUG] Relay list is up-to-date
May 28 15:58:35 gibson kernel: [UFW BLOCK] IN=enp37s0 OUT= MAC=2c:f0:5d:21:3e:c3:00:17:88:64:c1:f1:08:00 SRC=192.168.0.11 DST=192.168.0.10 LEN=319 TOS=0x00 PREC=0x00 TTL=64 ID=54471 DF PROTO=UDP SPT=1900 DPT=34362 LEN=299
May 28 15:58:35 gibson kernel: [UFW BLOCK] IN=enp37s0 OUT= MAC=2c:f0:5d:21:3e:c3:00:17:88:64:c1:f1:08:00 SRC=192.168.0.11 DST=192.168.0.10 LEN=328 TOS=0x00 PREC=0x00 TTL=64 ID=54473 DF PROTO=UDP SPT=1900 DPT=34362 LEN=308
May 28 15:58:35 gibson kernel: [UFW BLOCK] IN=enp37s0 OUT= MAC=2c:f0:5d:21:3e:c3:00:17:88:64:c1:f1:08:00 SRC=192.168.0.11 DST=192.168.0.10 LEN=322 TOS=0x00 PREC=0x00 TTL=64 ID=54474 DF PROTO=UDP SPT=1900 DPT=34362 LEN=302
May 28 15:58:36 gibson kernel: [UFW BLOCK] IN=enp37s0 OUT= MAC=2c:f0:5d:21:3e:c3:00:17:88:64:c1:f1:08:00 SRC=192.168.0.11 DST=192.168.0.10 LEN=319 TOS=0x00 PREC=0x00 TTL=64 ID=54530 DF PROTO=UDP SPT=1900 DPT=34362 LEN=299
May 28 15:58:36 gibson kernel: [UFW BLOCK] IN=enp37s0 OUT= MAC=2c:f0:5d:21:3e:c3:00:17:88:64:c1:f1:08:00 SRC=192.168.0.11 DST=192.168.0.10 LEN=328 TOS=0x00 PREC=0x00 TTL=64 ID=54535 DF PROTO=UDP SPT=1900 DPT=34362 LEN=308
May 28 15:58:36 gibson kernel: [UFW BLOCK] IN=enp37s0 OUT= MAC=2c:f0:5d:21:3e:c3:00:17:88:64:c1:f1:08:00 SRC=192.168.0.11 DST=192.168.0.10 LEN=322 TOS=0x00 PREC=0x00 TTL=64 ID=54536 DF PROTO=UDP SPT=1900 DPT=34362 LEN=302
May 28 15:58:36 gibson kernel: [UFW BLOCK] IN=enp37s0 OUT= MAC=2c:f0:5d:21:3e:c3:00:17:88:64:c1:f1:08:00 SRC=192.168.0.11 DST=192.168.0.10 LEN=319 TOS=0x00 PREC=0x00 TTL=64 ID=54550 DF PROTO=UDP SPT=1900 DPT=51765 LEN=299
May 28 15:58:46 gibson kernel: [UFW BLOCK] IN=enp37s0 OUT= MAC=2c:f0:5d:21:3e:c3:00:17:88:64:c1:f1:08:00 SRC=192.168.0.11 DST=192.168.0.10 LEN=319 TOS=0x00 PREC=0x00 TTL=64 ID=54598 DF PROTO=UDP SPT=1900 DPT=51765 LEN=299
May 28 15:58:51 gibson systemd[1]: systemd-hostnamed.service: Deactivated successfully.
May 28 15:58:51 gibson audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:51 gibson kernel: audit: type=1131 audit(1653778731.122:83): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:58:51 gibson audit: BPF prog-id=0 op=UNLOAD
May 28 15:58:51 gibson audit: BPF prog-id=0 op=UNLOAD
May 28 15:58:51 gibson audit: BPF prog-id=0 op=UNLOAD
May 28 15:58:51 gibson kernel: audit: type=1334 audit(1653778731.172:84): prog-id=0 op=UNLOAD
May 28 15:58:51 gibson kernel: audit: type=1334 audit(1653778731.172:85): prog-id=0 op=UNLOAD
May 28 15:58:51 gibson kernel: audit: type=1334 audit(1653778731.172:86): prog-id=0 op=UNLOAD
May 28 15:58:51 gibson systemd-timesyncd[528]: Contacted time server 38.229.54.9:123 (2.arch.pool.ntp.org).
May 28 15:58:51 gibson systemd-timesyncd[528]: Initial clock synchronization to Sat 2022-05-28 15:58:51.233754 PDT.
May 28 15:59:06 gibson kernel: [UFW BLOCK] IN=enp37s0 OUT= MAC=2c:f0:5d:21:3e:c3:00:17:88:64:c1:f1:08:00 SRC=192.168.0.11 DST=192.168.0.10 LEN=319 TOS=0x00 PREC=0x00 TTL=64 ID=55518 DF PROTO=UDP SPT=1900 DPT=51765 LEN=299
May 28 15:59:26 gibson kernel: [UFW BLOCK] IN=enp37s0 OUT= MAC=2c:f0:5d:21:3e:c3:00:17:88:64:c1:f1:08:00 SRC=192.168.0.11 DST=192.168.0.10 LEN=319 TOS=0x00 PREC=0x00 TTL=64 ID=56359 DF PROTO=UDP SPT=1900 DPT=51765 LEN=299
May 28 15:59:44 gibson dbus-daemon[674]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.9' (uid=0 pid=963 comm="sshd: chris [priv] ")
May 28 15:59:44 gibson dbus-daemon[674]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
May 28 15:59:44 gibson sshd[963]: pam_systemd_home(sshd:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
May 28 15:59:44 gibson sshd[963]: Accepted publickey for chris from 192.168.0.14 port 42396 ssh2: RSA SHA256:8K2VKWakmNra0L5TnaHbmckHFer+sNWvYRj8txNuHYc
May 28 15:59:44 gibson audit[963]: USER_ACCT pid=963 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 15:59:44 gibson audit[963]: CRED_ACQ pid=963 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 15:59:44 gibson audit[963]: SYSCALL arch=c000003e syscall=1 success=yes exit=4 a0=3 a1=7ffc94d76df0 a2=4 a3=7ffc94d76b04 items=0 ppid=708 pid=963 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="sshd" exe="/usr/bin/sshd" key=(null)
May 28 15:59:44 gibson audit: PROCTITLE proctitle=737368643A206368726973205B707269765D
May 28 15:59:44 gibson kernel: audit: type=1101 audit(1653778784.041:87): pid=963 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 15:59:44 gibson kernel: audit: type=1103 audit(1653778784.042:88): pid=963 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 15:59:44 gibson kernel: audit: type=1006 audit(1653778784.042:89): pid=963 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
May 28 15:59:44 gibson kernel: audit: type=1300 audit(1653778784.042:89): arch=c000003e syscall=1 success=yes exit=4 a0=3 a1=7ffc94d76df0 a2=4 a3=7ffc94d76b04 items=0 ppid=708 pid=963 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="sshd" exe="/usr/bin/sshd" key=(null)
May 28 15:59:44 gibson kernel: audit: type=1327 audit(1653778784.042:89): proctitle=737368643A206368726973205B707269765D
May 28 15:59:44 gibson sshd[963]: pam_unix(sshd:session): session opened for user chris(uid=1000) by (uid=0)
May 28 15:59:44 gibson systemd[1]: Created slice User Slice of UID 1000.
May 28 15:59:44 gibson systemd[1]: Starting User Runtime Directory /run/user/1000...
May 28 15:59:44 gibson systemd-logind[677]: New session 2 of user chris.
May 28 15:59:44 gibson systemd[1]: Finished User Runtime Directory /run/user/1000.
May 28 15:59:44 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:59:44 gibson kernel: audit: type=1130 audit(1653778784.054:90): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:59:44 gibson systemd[1]: Starting User Manager for UID 1000...
May 28 15:59:44 gibson dbus-daemon[674]: [system] Activating via systemd: service name='org.freedesktop.home1' unit='dbus-org.freedesktop.home1.service' requested by ':1.11' (uid=0 pid=966 comm="(systemd)")
May 28 15:59:44 gibson dbus-daemon[674]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.home1.service': Unit dbus-org.freedesktop.home1.service not found.
May 28 15:59:44 gibson systemd[966]: pam_systemd_home(systemd-user:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
May 28 15:59:44 gibson audit[966]: USER_ACCT pid=966 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:59:44 gibson audit[966]: CRED_ACQ pid=966 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
May 28 15:59:44 gibson systemd[966]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8002 service=[systemd-user] terminal=[] user=[chris] ruser=[<unknown>] rhost=[<unknown>]
May 28 15:59:44 gibson audit[966]: SYSCALL arch=c000003e syscall=1 success=yes exit=4 a0=9 a1=7fff7eda9630 a2=4 a3=7fff7eda9344 items=0 ppid=1 pid=966 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null)
May 28 15:59:44 gibson audit: PROCTITLE proctitle="(systemd)"
May 28 15:59:44 gibson kernel: audit: type=1101 audit(1653778784.057:91): pid=966 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:59:44 gibson kernel: audit: type=1103 audit(1653778784.057:92): pid=966 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
May 28 15:59:44 gibson kernel: audit: type=1006 audit(1653778784.057:93): pid=966 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
May 28 15:59:44 gibson kernel: audit: type=1300 audit(1653778784.057:93): arch=c000003e syscall=1 success=yes exit=4 a0=9 a1=7fff7eda9630 a2=4 a3=7fff7eda9344 items=0 ppid=1 pid=966 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null)
May 28 15:59:44 gibson systemd[966]: pam_unix(systemd-user:session): session opened for user chris(uid=1000) by (uid=0)
May 28 15:59:44 gibson systemd[966]: pam_env(systemd-user:session): deprecated reading of user environment enabled
May 28 15:59:44 gibson audit[966]: USER_START pid=966 uid=0 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_systemd_home,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:59:44 gibson systemd[966]: Queued start job for default target Main User Target.
May 28 15:59:44 gibson audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 28 15:59:44 gibson audit[963]: USER_START pid=963 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_systemd_home,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 15:59:44 gibson audit[975]: CRED_ACQ pid=975 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="chris" exe="/usr/bin/sshd" hostname=192.168.0.14 addr=192.168.0.14 terminal=ssh res=success'
May 28 15:59:44 gibson sshd[963]: pam_env(sshd:session): deprecated reading of user environment enabled
May 28 15:59:44 gibson systemd[966]: Created slice User Application Slice.
May 28 15:59:44 gibson systemd[966]: Reached target Paths.
May 28 15:59:44 gibson systemd[966]: Reached target Timers.
May 28 15:59:44 gibson systemd[966]: Starting D-Bus User Message Bus Socket...
May 28 15:59:44 gibson systemd[966]: Listening on GnuPG network certificate management daemon.
May 28 15:59:44 gibson systemd[966]: Listening on GCR ssh-agent wrapper.
May 28 15:59:44 gibson systemd[966]: Listening on GNOME Keyring daemon.
May 28 15:59:44 gibson systemd[966]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
May 28 15:59:44 gibson systemd[966]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
May 28 15:59:44 gibson systemd[966]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
May 28 15:59:44 gibson systemd[966]: Listening on GnuPG cryptographic agent and passphrase cache.
May 28 15:59:44 gibson systemd[966]: Listening on p11-kit server.
May 28 15:59:44 gibson systemd[966]: Listening on Sound System.
May 28 15:59:44 gibson systemd[966]: Listening on D-Bus User Message Bus Socket.
May 28 15:59:44 gibson systemd[966]: Reached target Sockets.
May 28 15:59:44 gibson systemd[966]: Reached target Basic System.
May 28 15:59:44 gibson systemd[1]: Started User Manager for UID 1000.
May 28 15:59:44 gibson systemd[1]: Started Session 2 of User chris.
May 28 15:59:44 gibson systemd[966]: Starting gamemoded...
May 28 15:59:44 gibson systemd[966]: Starting Update XDG user dir configuration...
May 28 15:59:44 gibson systemd[966]: Finished Update XDG user dir configuration.
May 28 15:59:44 gibson systemd[966]: Created slice User Core Session Slice.
May 28 15:59:44 gibson systemd[966]: Starting D-Bus User Message Bus...
May 28 15:59:44 gibson systemd[966]: Started D-Bus User Message Bus.
May 28 15:59:44 gibson systemd[966]: Started gamemoded.
May 28 15:59:44 gibson systemd[966]: Reached target Main User Target.
May 28 15:59:44 gibson systemd[966]: Startup finished in 108ms.With 5.17.9 my RAID1 is mounted and available. However I just did notice that on one of these 5.17.9 boots one of my disks was down (cat /proc/mdstat only showed one disk up), but I rebooted again and they were both available. Not sure if that means one of my disks is about to die.
Last edited by cnose (2022-05-28 23:32:47)
Offline
#8 2022-05-29 00:37:20
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,324
Re: [SOLVED] RAID 1 not booting with kernel 5.18
What is the output under 5.18 of
cat /proc/mdstat
lsmodLast edited by loqs (2022-05-29 00:37:31)
Offline
#9 2022-05-29 02:09:09
- scott_fakename
- Member
- Registered: 2012-08-15
- Posts: 92
Re: [SOLVED] RAID 1 not booting with kernel 5.18
I'm having the same problem, except i'm using the regular linux release instead of testing (and i'm not using zen either), and I'm using raid-6, not raid-1. My disks are all healthy -- I posted in the kernel and hardware forum but it got deleted. https://bbs.archlinux.org/viewtopic.php?id=276763
For me the output of those commands are:
$ cat /proc/mdstat
cat: /proc/mdstat: No such file or directory
$ lsmod
Module Size Used by
snd_hda_codec_hdmi 86016 1
iptable_mangle 16384 1
iptable_raw 16384 1
xt_connmark 16384 4
nf_conntrack 180224 1 xt_connmark
nf_defrag_ipv6 24576 1 nf_conntrack
nf_defrag_ipv4 16384 1 nf_conntrack
libcrc32c 16384 1 nf_conntrack
xt_mark 16384 2
ip6table_mangle 16384 1
xt_comment 16384 6
xt_addrtype 16384 2
ip6table_raw 16384 1
ip6_tables 36864 2 ip6table_raw,ip6table_mangle
snd_sof_pci_intel_apl 16384 0
snd_sof_intel_hda_common 139264 1 snd_sof_pci_intel_apl
soundwire_intel 53248 1 snd_sof_intel_hda_common
soundwire_generic_allocation 16384 1 soundwire_intel
soundwire_cadence 45056 1 soundwire_intel
snd_sof_intel_hda 20480 1 snd_sof_intel_hda_common
snd_sof_pci 24576 2 snd_sof_intel_hda_common,snd_sof_pci_intel_apl
snd_sof_xtensa_dsp 20480 1 snd_sof_intel_hda_common
snd_sof 237568 2 snd_sof_pci,snd_sof_intel_hda_common
snd_sof_utils 20480 1 snd_sof
soundwire_bus 122880 3 soundwire_intel,soundwire_generic_allocation,soundwire_cadence
ledtrig_audio 16384 1 snd_sof
snd_soc_skl 217088 0
snd_soc_hdac_hda 28672 2 snd_sof_intel_hda_common,snd_soc_skl
snd_hda_ext_core 36864 4 snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_soc_skl,snd_sof_intel_hda
wireguard 102400 0
snd_soc_sst_ipc 20480 1 snd_soc_skl
snd_soc_sst_dsp 40960 1 snd_soc_skl
curve25519_x86_64 36864 1 wireguard
intel_rapl_msr 20480 0
snd_soc_acpi_intel_match 65536 3 snd_sof_intel_hda_common,snd_soc_skl,snd_sof_pci_intel_apl
libchacha20poly1305 16384 1 wireguard
snd_soc_acpi 16384 3 snd_soc_acpi_intel_match,snd_sof_intel_hda_common,snd_soc_skl
chacha_x86_64 28672 1 libchacha20poly1305
intel_rapl_common 32768 1 intel_rapl_msr
poly1305_x86_64 28672 1 libchacha20poly1305
libcurve25519_generic 49152 2 curve25519_x86_64,wireguard
snd_soc_core 393216 5 soundwire_intel,snd_sof,snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_soc_skl
libchacha 16384 1 chacha_x86_64
ip6_udp_tunnel 16384 1 wireguard
udp_tunnel 20480 1 wireguard
intel_pmc_bxt 16384 0
intel_telemetry_pltdrv 32768 0
intel_punit_ipc 16384 1 intel_telemetry_pltdrv
intel_telemetry_core 20480 1 intel_telemetry_pltdrv
snd_compress 28672 1 snd_soc_core
ac97_bus 16384 1 snd_soc_core
x86_pkg_temp_thermal 20480 0
intel_powerclamp 20480 0
snd_pcm_dmaengine 16384 1 snd_soc_core
coretemp 20480 0
kvm_intel 389120 0
snd_hda_intel 61440 0
spi_pxa2xx_platform 40960 0
kvm 1118208 1 kvm_intel
cfg80211 1085440 0
dw_dmac 16384 0
snd_intel_dspcfg 36864 3 snd_hda_intel,snd_sof_intel_hda_common,snd_soc_skl
snd_intel_sdw_acpi 20480 2 snd_sof_intel_hda_common,snd_intel_dspcfg
rfkill 36864 2 cfg80211
snd_hda_codec 184320 3 snd_hda_codec_hdmi,snd_hda_intel,snd_soc_hdac_hda
i915 3428352 1
8250_dw 20480 0
8021q 40960 0
irqbypass 16384 1 kvm
snd_hda_core 118784 8 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_soc_skl,snd_sof_intel_hda
garp 16384 1 8021q
mei_pxp 20480 0
mrp 20480 1 8021q
crct10dif_pclmul 16384 1
stp 16384 1 garp
crc32_pclmul 16384 0
llc 16384 2 stp,garp
mei_hdcp 24576 0
ghash_clmulni_intel 16384 0
snd_hwdep 16384 1 snd_hda_codec
aesni_intel 380928 0
crypto_simd 16384 1 aesni_intel
cryptd 28672 2 crypto_simd,ghash_clmulni_intel
drm_buddy 20480 1 i915
r8169 106496 0
wdat_wdt 20480 0
snd_pcm 172032 12 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,soundwire_intel,snd_sof,snd_sof_intel_hda_common,snd_compress,snd_soc_core,snd_sof_utils,snd_soc_skl,snd_hda_core,snd_pcm_dmaengine
i2c_i801 45056 0
pcspkr 16384 0
rapl 16384 0
i2c_smbus 20480 1 i2c_i801
intel_cstate 20480 0
realtek 36864 2
tpm_crb 20480 0
ttm 86016 1 i915
mdio_devres 16384 1 r8169
snd_timer 49152 1 snd_pcm
drm_dp_helper 167936 1 i915
snd 126976 9 snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_sof,snd_timer,snd_compress,snd_soc_core,snd_pcm
intel_lpss_pci 28672 6
mei_me 53248 2
intel_ish_ipc 32768 0
intel_lpss 16384 1 intel_lpss_pci
vfat 24576 1
tpm_tis 16384 0
libphy 172032 3 r8169,mdio_devres,realtek
idma64 20480 0
tpm_tis_core 28672 1 tpm_tis
fat 90112 1 vfat
soundcore 16384 1 snd
intel_ishtp 69632 1 intel_ish_ipc
intel_gtt 28672 1 i915
mei 172032 5 mei_hdcp,mei_pxp,mei_me
tpm 102400 3 tpm_tis,tpm_crb,tpm_tis_core
rng_core 20480 1 tpm
mac_hid 16384 0
video 57344 1 i915
fuse 176128 1
bpf_preload 24576 0
ip_tables 36864 2 iptable_raw,iptable_mangle
x_tables 57344 10 ip6table_raw,xt_addrtype,xt_comment,ip6_tables,xt_connmark,iptable_raw,ip_tables,ip6table_mangle,iptable_mangle,xt_mark
ext4 1011712 1
crc32c_generic 16384 0
crc16 16384 1 ext4
mbcache 16384 1 ext4
jbd2 192512 1 ext4
mmc_block 57344 2
sdhci_pci 81920 0
cqhci 40960 1 sdhci_pci
crc32c_intel 24576 3
sdhci 90112 1 sdhci_pci
xhci_pci 20480 0
mmc_core 229376 4 sdhci,cqhci,mmc_block,sdhci_pci
xhci_pci_renesas 24576 1 xhci_pciLast edited by scott_fakename (2022-05-29 02:33:56)
Offline
#10 2022-05-29 02:38:04
- ecruz1986
- Member
- From: Vitoria - ES, Brazil
- Registered: 2021-08-30
- Posts: 2
Re: [SOLVED] RAID 1 not booting with kernel 5.18
Hi, I'm affected too!
This should no longer be in [testing] since 5.18 is now in [core]!
I just updated to 5.18.0-arch1-1 and after a reboot my RAID 1 volume is unavailable.
Luckily that's not the system volume, it's just storage, so I can still boot the system.
It is an Intel RST (fakeraid).
When trying to manually assemble the container with
# mdadm --assemble /dev/md/Container1 --verboseI get:
mdadm: looking for devices for /dev/md/Container1
mdadm: unexpected failure opening /dev/md127Offline
#11 2022-05-29 02:38:14
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,424
- Website
Re: [SOLVED] RAID 1 not booting with kernel 5.18
5.18 is in [core] now.
#edit: Works fine for the vanilla kernel:
┌─[Centurion ~]
└─╼ awk '/^md/ {printf "%s: ", $1}; /blocks/ {print $NF}' < /proc/mdstat
md0: [UU]Last edited by jasonwryan (2022-05-29 02:43:39)
Offline
#12 2022-05-29 02:51:01
- Bouhappy
- Member
- Registered: 2016-11-29
- Posts: 1
Re: [SOLVED] RAID 1 not booting with kernel 5.18
I have the same issue, with the following linux package from core:
linux-5.18.arch1-1-x86_64.pkg.tar.zstThis package causes my RAID10 array to fail in the following way:
$ mdadm --scan --assemble
unexpected failure opening /dev/md127The expected device /dev/md127 is not present. The required kernel modules are not loaded. Upon doing:
$ modprobe raid1 raid10 raid456The raid profiles do appear in `/proc/mdstat` however the device still does not appear. I didn't capture the output of `lsmod`, but I'm pretty sure that the module `raid10` did not load, in fact. (I will try again)
There's really not much in the logs, but it's just to show that I'm really using stock kernel:
May 29 09:51:59 wallee kernel: Linux version 5.18.0-arch1-1 (linux@archlinux) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT_DYNAMIC Tue, 24 May 2022 22:00:36 +0000
[...]
May 29 09:51:59 wallee kernel: Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux.img root="UUID=3954ce01-54e9-4463-9f64-f36dd6ca4caa" rw
[...]
May 29 09:53:29 wallee systemd[1]: dev-disk-by\x2duuid-8c72acbc\x2d1d08\x2d4891\x2db28f\x2dd88a2074e402.device: Job dev-disk-by\x2duuid-8c72acbc\x2d1d08\x2d4891\x2db28f\x2dd88a2074e402.device/start timed out.
May 29 09:53:29 wallee systemd[1]: Timed out waiting for device /dev/disk/by-uuid/8c72acbc-1d08-4891-b28f-d88a2074e402.Downgrading to linux-5.17.7.arch1-1-x86_64.pkg.tar.zst fixes the problem, and lsmod now shows:
lsmod | grep raid
raid10 73728 1
md_mod 204800 2 raid10Offline
#13 2022-05-29 04:30:31
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,324
Re: [SOLVED] RAID 1 not booting with kernel 5.18
Offline
#14 2022-05-29 09:02:44
- WorMzy
- Forum Moderator
- From: Scotland
- Registered: 2010-06-16
- Posts: 11,846
- Website
Re: [SOLVED] RAID 1 not booting with kernel 5.18
Mod note: moving back to Kernel and Hardware
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
#15 2022-05-29 10:59:17
- tcarpent
- Member
- Registered: 2014-03-21
- Posts: 2
Re: [SOLVED] RAID 1 not booting with kernel 5.18
Hit this same issue this morning. I followed https://wiki.archlinux.org/title/Arch_L … cific_date to downgrade, using 2022-05-27 as the date, back to working order, for now.
Offline
#16 2022-05-29 13:42:53
- MrToddarama
- Member
- Registered: 2020-08-01
- Posts: 3
Re: [SOLVED] RAID 1 not booting with kernel 5.18
I had the same issue on upgrade to 5.18. I have two raid arrays, RAID1 and RAID10. The RAID1 array was fine but there were issues withe RAID10. I resolved my issue by cleaning up my /etc/mdadm.conf.
Check your mdadm.conf definitions vs your actual /dev/mdXXX devices. My mdadm.conf was referencing a link for the device specification in the ARRAY line for the RAID10 array. I replaced this with a direct reference to the device .. changing something like this:
ARRAY /dev/userraid10 metadata=1.2 name=phenom:UserRAID10 UUID=bee9ca99:c9a86e5e:0d3e9c1a:c5473a21
to look like this:
ARRAY /dev/md127 metadata=1.2 name=phenom:UserRAID10 UUID=bee9ca99:c9a86e5e:0d3e9c1a:c5473a21
Offline
#17 2022-05-29 13:52:28
- cnose
- Member
- Registered: 2020-08-15
- Posts: 3
Re: [SOLVED] RAID 1 not booting with kernel 5.18
MrToddarama wrote:
I had the same issue on upgrade to 5.18. I have two raid arrays, RAID1 and RAID10. The RAID1 array was fine but there were issues withe RAID10. I resolved my issue by cleaning up my /etc/mdadm.conf.
Check your mdadm.conf definitions vs your actual /dev/mdXXX devices. My mdadm.conf was referencing a link for the device specification in the ARRAY line for the RAID10 array. I replaced this with a direct reference to the device .. changing something like this:
ARRAY /dev/userraid10 metadata=1.2 name=phenom:UserRAID10 UUID=bee9ca99:c9a86e5e:0d3e9c1a:c5473a21
to look like this:
ARRAY /dev/md127 metadata=1.2 name=phenom:UserRAID10 UUID=bee9ca99:c9a86e5e:0d3e9c1a:c5473a21
Can confirm that making this change to my mdadm.conf fixed the issue for me.
Offline
#18 2022-05-29 14:21:42
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,324
Re: [SOLVED] RAID 1 not booting with kernel 5.18
Very big guess, when the device has a custom name it needed the newly disabled https://cateee.net/lkddb/web-lkddb/BLOC … OLOAD.html instead of using udev matching?
Offline
#19 2022-05-29 14:33:59
- merdely
- Member
- Registered: 2021-07-09
- Posts: 4
Re: [SOLVED] RAID 1 not booting with kernel 5.18
MrToddarama wrote:
I had the same issue on upgrade to 5.18. I have two raid arrays, RAID1 and RAID10. The RAID1 array was fine but there were issues withe RAID10. I resolved my issue by cleaning up my /etc/mdadm.conf.
Check your mdadm.conf definitions vs your actual /dev/mdXXX devices. My mdadm.conf was referencing a link for the device specification in the ARRAY line for the RAID10 array. I replaced this with a direct reference to the device .. changing something like this:
ARRAY /dev/userraid10 metadata=1.2 name=phenom:UserRAID10 UUID=bee9ca99:c9a86e5e:0d3e9c1a:c5473a21
to look like this:
ARRAY /dev/md127 metadata=1.2 name=phenom:UserRAID10 UUID=bee9ca99:c9a86e5e:0d3e9c1a:c5473a21
I can confirm that this fixes my RAID0 set up too.
Offline
#20 2022-05-29 17:08:06
- Morta
- Member
- Registered: 2019-07-07
- Posts: 655
Re: [SOLVED] RAID 1 not booting with kernel 5.18
MrToddarama wrote:
I had the same issue on upgrade to 5.18. I have two raid arrays, RAID1 and RAID10. The RAID1 array was fine but there were issues withe RAID10. I resolved my issue by cleaning up my /etc/mdadm.conf.
Check your mdadm.conf definitions vs your actual /dev/mdXXX devices. My mdadm.conf was referencing a link for the device specification in the ARRAY line for the RAID10 array. I replaced this with a direct reference to the device .. changing something like this:
ARRAY /dev/userraid10 metadata=1.2 name=phenom:UserRAID10 UUID=bee9ca99:c9a86e5e:0d3e9c1a:c5473a21
to look like this:
ARRAY /dev/md127 metadata=1.2 name=phenom:UserRAID10 UUID=bee9ca99:c9a86e5e:0d3e9c1a:c5473a21
And if I haven't any entries in my mdadm.conf? I have two Nvme with RAID 0. Systemd-boot can't decrypt anymore the devices in the boot process.
Last edited by Morta (2022-05-29 17:09:41)
Offline
#21 2022-05-29 17:40:36
- scott_fakename
- Member
- Registered: 2012-08-15
- Posts: 92
Re: [SOLVED] RAID 1 not booting with kernel 5.18
I also was previously using just the default in my mdadm.conf (only a "DEVICE partitions" line). I did try adding the ARRAY line and changing the name to md127, but it did not do anything, both with and without the DEVICE line.
This did not fix it for me 
Offline
#22 2022-05-29 18:50:54
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,324
Re: [SOLVED] RAID 1 not booting with kernel 5.18
https://drive.google.com/file/d/1EuPqC3 … sp=sharing linux-5.18.arch1-1.1-x86_64.pkg.tar.zst
Only change is CONFIG_BLOCK_LEGACY_AUTOLOAD=Y instead of unset and change pkgrel to 1.1.
Offline
#23 2022-05-29 19:56:42
- Zgembo
- Member
- Registered: 2022-05-29
- Posts: 1
Re: [SOLVED] RAID 1 not booting with kernel 5.18
Fixed it by changing /etc/mdadm.conf ARRAY entry from
ARRAY /dev/md/hostname:home devices=/dev/sda1,/dev/sdb1 metadata=1.2 name=hostname:home UUID=...into
ARRAY /dev/md127 devices=/dev/sda1,/dev/sdb1 metadata=1.2 name=hostname:home UUID=...I have just one simple raid1 array set up on my system.
Last edited by Zgembo (2022-05-29 19:57:52)
Offline
#24 2022-05-29 20:42:52
- scott_fakename
- Member
- Registered: 2012-08-15
- Posts: 92
Re: [SOLVED] RAID 1 not booting with kernel 5.18
Ah, i don't know what I did wrong when I tried it the last time, but I gave changing the ARRAY device to /dev/md127 again and this time it worked. Very strange.
Still would be nice to know why it's not creating /dev/md/$array_name directory anymore, but at least I can use this for now.
Offline
#25 2022-05-29 20:49:38
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,324
Re: [SOLVED] RAID 1 not booting with kernel 5.18
scott_fakename wrote:
Still would be nice to know why it's not creating /dev/md/$array_name directory anymore, but at least I can use this for now.
Needs someone willing to test the changes in the kernel config and if that fails in the kernel itself with this release.
Offline