You are not logged in.
- Topics: Active | Unanswered
#1 2022-06-24 07:06:38
- janvdplaats
- Member
- Registered: 2022-06-24
- Posts: 7
Unable to find my Dedicated AMDGPU. able to see integrated graphics
Output of "xrandr --listproviders"
Providers: number : 1
Provider 0: id: 0x44 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 3 associated providers: 0 name:modesetting
Output of "lspci | grep "VGA""
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
I have tried installing various amd drivers.
Kernel is Linuxzen-5.18.4
Dedicated GPU is a R9 265X (Southern Islands)
CPU is a i7-4710HQ.
i have no option to disable / enable my dedicated graphics in my bios menu.
actual laptop:
https://be.dynabook.com/nl/discontinued … x70-b-102/
i have no idea what i could do to get this gpu recognized again.
would greatly appreciate help so i can get some use out of this laptop 
thanks in advance
Offline
#2 2022-06-24 07:15:17
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,569
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
Please post the entire "lspci" output (the thing doesn't necessarily show up as "VGA") and your xorg log, https://wiki.archlinux.org/title/Xorg#General
Offline
#3 2022-06-24 07:17:44
- janvdplaats
- Member
- Registered: 2022-06-24
- Posts: 7
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
[jan@archlinux ~]$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
02:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader (rev 01)Last edited by janvdplaats (2022-06-24 07:48:53)
Offline
#4 2022-06-24 07:21:05
- janvdplaats
- Member
- Registered: 2022-06-24
- Posts: 7
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
[ 26.216]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 26.216] Current Operating System: Linux archlinux 5.18.4-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Wed, 15 Jun 2022 22:46:35 +0000 x86_64
[ 26.216] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-zen.img cryptdevice=PARTUUID=e08e9aff-9123-4da4-91c2-b613eecc907b:luksdev root=/dev/mapper/luksdev zswap.enabled=0 rootflags=subvol=@ rw intel_pstate=no_hwp rootfstype=btrfs
[ 26.216]
[ 26.216] Current version of pixman: 0.40.0
[ 26.216] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 26.216] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 26.216] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 24 09:16:51 2022
[ 26.219] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 26.219] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 26.219] (==) No Layout section. Using the first Screen section.
[ 26.219] (==) No screen section available. Using defaults.
[ 26.219] (**) |-->Screen "Default Screen Section" (0)
[ 26.219] (**) | |-->Monitor "<default monitor>"
[ 26.220] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 26.220] (==) Automatically adding devices
[ 26.220] (==) Automatically enabling devices
[ 26.220] (==) Automatically adding GPU devices
[ 26.220] (==) Automatically binding GPU devices
[ 26.220] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 26.220] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 26.220] Entry deleted from font path.
[ 26.220] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 26.220] Entry deleted from font path.
[ 26.220] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 26.220] Entry deleted from font path.
[ 26.220] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 26.220] Entry deleted from font path.
[ 26.220] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 26.220] Entry deleted from font path.
[ 26.220] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 26.220] Entry deleted from font path.
[ 26.220] (==) FontPath set to:
[ 26.220] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.220] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.220] (II) Module ABI versions:
[ 26.220] X.Org ANSI C Emulation: 0.4
[ 26.220] X.Org Video Driver: 25.2
[ 26.220] X.Org XInput driver : 24.4
[ 26.220] X.Org Server Extension : 10.0
[ 26.221] (++) using VT number 7
[ 26.221] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 26.222] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 26.222] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 26.229] (--) PCI:*(0@0:2:0) 8086:0416:1179:f935 rev 6, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 26.229] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 26.229] (II) LoadModule: "glx"
[ 26.229] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.258] (II) Module glx: vendor="X.Org Foundation"
[ 26.258] compiled for 1.21.1.3, module version = 1.0.0
[ 26.258] ABI class: X.Org Server Extension, version 10.0
[ 26.258] (==) Matched intel as autoconfigured driver 0
[ 26.258] (==) Matched modesetting as autoconfigured driver 1
[ 26.258] (==) Matched fbdev as autoconfigured driver 2
[ 26.258] (==) Matched vesa as autoconfigured driver 3
[ 26.258] (==) Assigned the driver to the xf86ConfigLayout
[ 26.258] (II) LoadModule: "intel"
[ 26.259] (WW) Warning, couldn't open module intel
[ 26.259] (EE) Failed to load module "intel" (module does not exist, 0)
[ 26.259] (II) LoadModule: "modesetting"
[ 26.259] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 26.266] (II) Module modesetting: vendor="X.Org Foundation"
[ 26.266] compiled for 1.21.1.3, module version = 1.21.1
[ 26.266] Module class: X.Org Video Driver
[ 26.266] ABI class: X.Org Video Driver, version 25.2
[ 26.266] (II) LoadModule: "fbdev"
[ 26.266] (WW) Warning, couldn't open module fbdev
[ 26.266] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 26.267] (II) LoadModule: "vesa"
[ 26.267] (WW) Warning, couldn't open module vesa
[ 26.267] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 26.267] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 26.294] (II) modeset(0): using drv /dev/dri/card0
[ 26.294] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 26.294] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 26.294] (==) modeset(0): RGB weight 888
[ 26.294] (==) modeset(0): Default visual is TrueColor
[ 26.294] (II) Loading sub module "glamoregl"
[ 26.294] (II) LoadModule: "glamoregl"
[ 26.294] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 26.310] (II) Module glamoregl: vendor="X.Org Foundation"
[ 26.310] compiled for 1.21.1.3, module version = 1.0.1
[ 26.310] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.434] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 4600 (HSW GT2)
[ 27.434] (II) modeset(0): glamor initialized
[ 27.434] (==) modeset(0): VariableRefresh: disabled
[ 27.434] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 27.435] (II) modeset(0): Output eDP-1 has no monitor section
[ 27.436] (II) modeset(0): Output VGA-1 has no monitor section
[ 27.438] (II) modeset(0): Output HDMI-1 has no monitor section
[ 27.439] (II) modeset(0): EDID for output eDP-1
[ 27.439] (II) modeset(0): Manufacturer: CMN Model: 1737 Serial#: 0
[ 27.439] (II) modeset(0): Year: 2014 Week: 17
[ 27.439] (II) modeset(0): EDID Version: 1.4
[ 27.439] (II) modeset(0): Digital Display Input
[ 27.439] (II) modeset(0): 6 bits per channel
[ 27.439] (II) modeset(0): Digital interface is DisplayPort
[ 27.439] (II) modeset(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 27.439] (II) modeset(0): Gamma: 2.20
[ 27.439] (II) modeset(0): No DPMS capabilities specified
[ 27.439] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 27.439] (II) modeset(0): First detailed timing is preferred mode
[ 27.439] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 27.439] (II) modeset(0): redX: 0.640 redY: 0.333 greenX: 0.313 greenY: 0.613
[ 27.439] (II) modeset(0): blueX: 0.154 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 27.439] (II) modeset(0): Manufacturer's mask: 0
[ 27.439] (II) modeset(0): Supported detailed timing:
[ 27.439] (II) modeset(0): clock: 152.8 MHz Image Size: 381 x 214 mm
[ 27.439] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2250 h_border: 0
[ 27.439] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1132 v_border: 0
[ 27.439] (II) modeset(0): N173HGE-E21
[ 27.439] (II) modeset(0): CMN
[ 27.439] (II) modeset(0): N173HGE-E21
[ 27.439] (II) modeset(0): EDID (in hex):
[ 27.439] (II) modeset(0): 00ffffffffffff000dae371700000000
[ 27.439] (II) modeset(0): 111801049526157802d495a355509d27
[ 27.439] (II) modeset(0): 0f505400000001010101010101010101
[ 27.439] (II) modeset(0): 010101010101b43b804a713834403020
[ 27.439] (II) modeset(0): 35007dd610000018000000fe004e3137
[ 27.439] (II) modeset(0): 334847452d4532310a20000000fe0043
[ 27.439] (II) modeset(0): 4d4e0a202020202020202020000000fe
[ 27.439] (II) modeset(0): 004e3137334847452d4532310a2000fd
[ 27.439] (II) modeset(0): Printing probed modes for output eDP-1
[ 27.439] (II) modeset(0): Modeline "1920x1080"x60.0 152.84 1920 1968 2000 2250 1080 1083 1088 1132 -hsync -vsync (67.9 kHz eP)
[ 27.439] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 27.439] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 27.439] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 27.439] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 27.439] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 27.439] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 27.439] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 27.439] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 27.439] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 27.439] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 27.439] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 27.439] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 27.439] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 27.439] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 27.439] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 27.440] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 27.440] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 27.440] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 27.440] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 27.440] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 27.440] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 27.440] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 27.440] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 27.440] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 27.440] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 27.440] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 27.440] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 27.440] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 27.440] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 27.440] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 27.440] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 27.440] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 27.440] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 27.440] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 27.440] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 27.440] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 27.440] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 27.440] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 27.440] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 27.440] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 27.440] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 27.440] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 27.440] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 27.440] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 27.440] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 27.440] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 27.440] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 27.440] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 27.440] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 27.440] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 27.440] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 27.440] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 27.440] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 27.440] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 27.440] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 27.440] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 27.440] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 27.440] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 27.440] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 27.440] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 27.440] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 27.440] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 27.440] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 27.440] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 27.440] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 27.440] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 27.440] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 27.440] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 27.440] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 27.440] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 27.441] (II) modeset(0): EDID for output VGA-1
[ 27.442] (II) modeset(0): EDID for output HDMI-1
[ 27.442] (II) modeset(0): Output eDP-1 connected
[ 27.442] (II) modeset(0): Output VGA-1 disconnected
[ 27.442] (II) modeset(0): Output HDMI-1 disconnected
[ 27.442] (II) modeset(0): Using exact sizes for initial modes
[ 27.442] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 27.442] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.442] (==) modeset(0): DPI set to (96, 96)
[ 27.442] (II) Loading sub module "fb"
[ 27.443] (II) LoadModule: "fb"
[ 27.443] (II) Module "fb" already built-in
[ 27.487] (==) modeset(0): Backing store enabled
[ 27.487] (==) modeset(0): Silken mouse enabled
[ 27.561] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 27.561] (==) modeset(0): DPMS enabled
[ 27.561] (II) modeset(0): [DRI2] Setup complete
[ 27.561] (II) modeset(0): [DRI2] DRI driver: crocus
[ 27.561] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 27.561] (II) Initializing extension Generic Event Extension
[ 27.561] (II) Initializing extension SHAPE
[ 27.561] (II) Initializing extension MIT-SHM
[ 27.562] (II) Initializing extension XInputExtension
[ 27.562] (II) Initializing extension XTEST
[ 27.562] (II) Initializing extension BIG-REQUESTS
[ 27.562] (II) Initializing extension SYNC
[ 27.563] (II) Initializing extension XKEYBOARD
[ 27.563] (II) Initializing extension XC-MISC
[ 27.563] (II) Initializing extension SECURITY
[ 27.563] (II) Initializing extension XFIXES
[ 27.564] (II) Initializing extension RENDER
[ 27.564] (II) Initializing extension RANDR
[ 27.564] (II) Initializing extension COMPOSITE
[ 27.564] (II) Initializing extension DAMAGE
[ 27.565] (II) Initializing extension MIT-SCREEN-SAVER
[ 27.565] (II) Initializing extension DOUBLE-BUFFER
[ 27.565] (II) Initializing extension RECORD
[ 27.565] (II) Initializing extension DPMS
[ 27.566] (II) Initializing extension Present
[ 27.566] (II) Initializing extension DRI3
[ 27.566] (II) Initializing extension X-Resource
[ 27.566] (II) Initializing extension XVideo
[ 27.566] (II) Initializing extension XVideo-MotionCompensation
[ 27.566] (II) Initializing extension GLX
[ 27.573] (II) AIGLX: Loaded and initialized crocus
[ 27.573] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 27.573] (II) Initializing extension XFree86-VidModeExtension
[ 27.573] (II) Initializing extension XFree86-DGA
[ 27.573] (II) Initializing extension XFree86-DRI
[ 27.573] (II) Initializing extension DRI2
[ 27.574] (II) modeset(0): Damage tracking initialized
[ 27.574] (II) modeset(0): Setting screen physical size to 508 x 285
[ 27.629] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 27.629] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 27.629] (**) Power Button: Applying InputClass "system-keyboard"
[ 27.629] (II) LoadModule: "libinput"
[ 27.629] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 27.637] (II) Module libinput: vendor="X.Org Foundation"
[ 27.637] compiled for 1.21.1.3, module version = 1.2.1
[ 27.637] Module class: X.Org XInput Driver
[ 27.637] ABI class: X.Org XInput driver, version 24.4
[ 27.637] (II) Using input driver 'libinput' for 'Power Button'
[ 27.637] (**) Power Button: always reports core events
[ 27.637] (**) Option "Device" "/dev/input/event2"
[ 27.641] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 27.641] (II) event2 - Power Button: device is a keyboard
[ 27.641] (II) event2 - Power Button: device removed
[ 27.641] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 27.641] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27.641] (**) Option "xkb_model" "pc105+inet"
[ 27.641] (**) Option "xkb_layout" "us"
[ 27.641] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27.656] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 27.656] (II) event2 - Power Button: device is a keyboard
[ 27.657] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 27.657] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 27.657] (**) Video Bus: Applying InputClass "system-keyboard"
[ 27.657] (II) Using input driver 'libinput' for 'Video Bus'
[ 27.657] (**) Video Bus: always reports core events
[ 27.657] (**) Option "Device" "/dev/input/event8"
[ 27.657] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 27.657] (II) event8 - Video Bus: device is a keyboard
[ 27.657] (II) event8 - Video Bus: device removed
[ 27.665] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event8"
[ 27.665] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 27.665] (**) Option "xkb_model" "pc105+inet"
[ 27.665] (**) Option "xkb_layout" "us"
[ 27.665] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27.666] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 27.666] (II) event8 - Video Bus: device is a keyboard
[ 27.666] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 27.666] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 27.666] (**) Power Button: Applying InputClass "system-keyboard"
[ 27.666] (II) Using input driver 'libinput' for 'Power Button'
[ 27.666] (**) Power Button: always reports core events
[ 27.666] (**) Option "Device" "/dev/input/event0"
[ 27.667] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 27.667] (II) event0 - Power Button: device is a keyboard
[ 27.667] (II) event0 - Power Button: device removed
[ 27.667] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 27.667] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 27.667] (**) Option "xkb_model" "pc105+inet"
[ 27.667] (**) Option "xkb_layout" "us"
[ 27.667] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27.668] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 27.668] (II) event0 - Power Button: device is a keyboard
[ 27.668] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 27.668] (II) No input driver specified, ignoring this device.
[ 27.668] (II) This device may have been added with another device file.
[ 27.669] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[ 27.669] (II) No input driver specified, ignoring this device.
[ 27.669] (II) This device may have been added with another device file.
[ 27.669] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event11)
[ 27.669] (II) No input driver specified, ignoring this device.
[ 27.669] (II) This device may have been added with another device file.
[ 27.669] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event12)
[ 27.669] (II) No input driver specified, ignoring this device.
[ 27.669] (II) This device may have been added with another device file.
[ 27.669] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event13)
[ 27.669] (II) No input driver specified, ignoring this device.
[ 27.669] (II) This device may have been added with another device file.
[ 27.670] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event14)
[ 27.670] (II) No input driver specified, ignoring this device.
[ 27.670] (II) This device may have been added with another device file.
[ 27.670] (II) config/udev: Adding input device TOSHIBA Web Camera - HD: TOSHIB (/dev/input/event5)
[ 27.670] (**) TOSHIBA Web Camera - HD: TOSHIB: Applying InputClass "libinput keyboard catchall"
[ 27.670] (**) TOSHIBA Web Camera - HD: TOSHIB: Applying InputClass "system-keyboard"
[ 27.670] (II) Using input driver 'libinput' for 'TOSHIBA Web Camera - HD: TOSHIB'
[ 27.670] (**) TOSHIBA Web Camera - HD: TOSHIB: always reports core events
[ 27.670] (**) Option "Device" "/dev/input/event5"
[ 27.671] (II) event5 - TOSHIBA Web Camera - HD: TOSHIB: is tagged by udev as: Keyboard
[ 27.671] (II) event5 - TOSHIBA Web Camera - HD: TOSHIB: device is a keyboard
[ 27.671] (II) event5 - TOSHIBA Web Camera - HD: TOSHIB: device removed
[ 27.685] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7/event5"
[ 27.685] (II) XINPUT: Adding extended input device "TOSHIBA Web Camera - HD: TOSHIB" (type: KEYBOARD, id 9)
[ 27.685] (**) Option "xkb_model" "pc105+inet"
[ 27.685] (**) Option "xkb_layout" "us"
[ 27.685] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27.686] (II) event5 - TOSHIBA Web Camera - HD: TOSHIB: is tagged by udev as: Keyboard
[ 27.686] (II) event5 - TOSHIBA Web Camera - HD: TOSHIB: device is a keyboard
[ 27.687] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 27.687] (II) No input driver specified, ignoring this device.
[ 27.687] (II) This device may have been added with another device file.
[ 27.687] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[ 27.687] (II) No input driver specified, ignoring this device.
[ 27.687] (II) This device may have been added with another device file.
[ 27.687] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 27.687] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 27.687] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 27.687] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 27.687] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.687] (**) Option "Device" "/dev/input/event3"
[ 27.688] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 27.688] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 27.688] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 27.688] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 27.688] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 27.688] (**) Option "xkb_model" "pc105+inet"
[ 27.688] (**) Option "xkb_layout" "us"
[ 27.688] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27.689] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 27.689] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 27.690] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 27.690] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 27.690] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 27.690] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.690] (**) Option "Device" "/dev/input/event9"
[ 27.690] (II) event9 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 27.691] (II) event9 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 27.691] (II) event9 - SynPS/2 Synaptics TouchPad: device removed
[ 27.699] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event9"
[ 27.699] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 27.700] (**) Option "AccelerationScheme" "none"
[ 27.700] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 27.700] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 27.700] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 27.701] (II) event9 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 27.702] (II) event9 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 27.702] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 27.702] (II) No input driver specified, ignoring this device.
[ 27.702] (II) This device may have been added with another device file.
[ 27.703] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 27.703] (II) No input driver specified, ignoring this device.
[ 27.703] (II) This device may have been added with another device file.
[ 34.826] (II) modeset(0): EDID vendor "CMN", prod id 5943
[ 34.826] (II) modeset(0): Printing DDC gathered Modelines:
[ 34.826] (II) modeset(0): Modeline "1920x1080"x0.0 152.84 1920 1968 2000 2250 1080 1083 1088 1132 -hsync -vsync (67.9 kHz eP)Last edited by janvdplaats (2022-06-24 07:48:31)
Offline
#5 2022-06-24 07:40:58
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,967
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
Please post the full output of dmesg in code tags.
Offline
#6 2022-06-24 07:46:26
- janvdplaats
- Member
- Registered: 2022-06-24
- Posts: 7
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
[jan@archlinux ~]$ sudo dmesg
[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[ 0.000000] Linux version 5.18.4-zen1-1-zen (linux-zen@archlinux) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 ZEN SMP PREEMPT_DYNAMIC Wed, 15 Jun 2022 22:46:35 +0000
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux-zen.img cryptdevice=PARTUUID=e08e9aff-9123-4da4-91c2-b613eecc907b:luksdev root=/dev/mapper/luksdev zswap.enabled=0 rootflags=subvol=@ rw intel_pstate=no_hwp rootfstype=btrfs
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1776
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096c7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000096c80000-0x000000009807ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000098080000-0x000000009c68efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c68f000-0x000000009ce8efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ce8f000-0x000000009cf8efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cf8f000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x95af2018-0x95b02057] usable ==> usable
[ 0.000000] e820: update [mem 0x95af2018-0x95b02057] usable ==> usable
[ 0.000000] e820: update [mem 0x95ae1018-0x95af1057] usable ==> usable
[ 0.000000] e820: update [mem 0x95ae1018-0x95af1057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000095ae1017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000095ae1018-0x0000000095af1057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000095af1058-0x0000000095af2017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000095af2018-0x0000000095b02057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000095b02058-0x0000000096c7ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000096c80000-0x000000009807ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000098080000-0x000000009c68efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c68f000-0x000000009ce8efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009ce8f000-0x000000009cf8efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009cf8f000-0x000000009cffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045f5fffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ESRT=0x9c9ef318 ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9ce8ef98 RNG=0x9c946718
[ 0.000000] efi: seeding entropy pool
[ 0.000000] random: crng init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: TOSHIBA QOSMIO X70-B/06C6, BIOS 5.20 09/23/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.002 MHz processor
[ 0.000051] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000054] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000061] last_pfn = 0x45f600 max_arch_pfn = 0x400000000
[ 0.000163] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000769] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.009469] esrt: Reserving ESRT space from 0x000000009c9ef318 to 0x000000009c9ef350.
[ 0.009486] Using GB pages for direct mapping
[ 0.009828] Secure boot disabled
[ 0.009829] RAMDISK: [mem 0x7e8b5000-0x7fb0ffff]
[ 0.009833] ACPI: Early table checksum verification disabled
[ 0.009836] ACPI: RSDP 0x000000009CFFE014 000024 (v02 TOSINV)
[ 0.009840] ACPI: XSDT 0x000000009CFFE210 0000C4 (v01 TOSINV TOSINV00 00000001 01000013)
[ 0.009846] ACPI: FACP 0x000000009CFF7000 00010C (v05 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009851] ACPI: DSDT 0x000000009CFE9000 00A25E (v01 TOSINV TOSINV00 00000000 ACPI 00040000)
[ 0.009855] ACPI: FACS 0x000000009CF8B000 000040
[ 0.009857] ACPI: UEFI 0x000000009CFFC000 001036 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009861] ACPI: FPDT 0x000000009CFFA000 000044 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009864] ACPI: MSDM 0x000000009CFF9000 000055 (v03 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009867] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009870] ACPI: HPET 0x000000009CFF6000 000038 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009873] ACPI: APIC 0x000000009CFF5000 00008C (v03 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009876] ACPI: MCFG 0x000000009CFF4000 00003C (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009879] ACPI: SLIC 0x000000009CFE8000 000176 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009882] ACPI: WDAT 0x000000009CFE7000 000224 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009885] ACPI: SSDT 0x000000009CFE4000 002028 (v01 INSYDE HSW-LPT 00001000 ACPI 00040000)
[ 0.009888] ACPI: BOOT 0x000000009CFE2000 000028 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009891] ACPI: ASPT 0x000000009CFE0000 000034 (v07 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009894] ACPI: DBGP 0x000000009CFDF000 000034 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009897] ACPI: SSDT 0x000000009CFD0000 0074D1 (v01 TOSINV TsbOdm 00001000 ACPI 00040000)
[ 0.009900] ACPI: SSDT 0x000000009CFCF000 000539 (v01 INSYDE HSW-LPT 00003000 ACPI 00040000)
[ 0.009903] ACPI: SSDT 0x000000009CFCE000 000AD8 (v01 INSYDE HSW-LPT 00003000 ACPI 00040000)
[ 0.009907] ACPI: SSDT 0x000000009CFCA000 00382C (v01 INSYDE HSW-LPT 00003000 ACPI 00040000)
[ 0.009910] ACPI: DMAR 0x000000009CFC8000 0000B8 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009913] ACPI: BGRT 0x000000009CFC9000 000038 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[ 0.009915] ACPI: Reserving FACP table memory at [mem 0x9cff7000-0x9cff710b]
[ 0.009917] ACPI: Reserving DSDT table memory at [mem 0x9cfe9000-0x9cff325d]
[ 0.009918] ACPI: Reserving FACS table memory at [mem 0x9cf8b000-0x9cf8b03f]
[ 0.009919] ACPI: Reserving UEFI table memory at [mem 0x9cffc000-0x9cffd035]
[ 0.009920] ACPI: Reserving FPDT table memory at [mem 0x9cffa000-0x9cffa043]
[ 0.009921] ACPI: Reserving MSDM table memory at [mem 0x9cff9000-0x9cff9054]
[ 0.009922] ACPI: Reserving ASF! table memory at [mem 0x9cff8000-0x9cff80a4]
[ 0.009923] ACPI: Reserving HPET table memory at [mem 0x9cff6000-0x9cff6037]
[ 0.009924] ACPI: Reserving APIC table memory at [mem 0x9cff5000-0x9cff508b]
[ 0.009925] ACPI: Reserving MCFG table memory at [mem 0x9cff4000-0x9cff403b]
[ 0.009926] ACPI: Reserving SLIC table memory at [mem 0x9cfe8000-0x9cfe8175]
[ 0.009927] ACPI: Reserving WDAT table memory at [mem 0x9cfe7000-0x9cfe7223]
[ 0.009928] ACPI: Reserving SSDT table memory at [mem 0x9cfe4000-0x9cfe6027]
[ 0.009929] ACPI: Reserving BOOT table memory at [mem 0x9cfe2000-0x9cfe2027]
[ 0.009930] ACPI: Reserving ASPT table memory at [mem 0x9cfe0000-0x9cfe0033]
[ 0.009931] ACPI: Reserving DBGP table memory at [mem 0x9cfdf000-0x9cfdf033]
[ 0.009932] ACPI: Reserving SSDT table memory at [mem 0x9cfd0000-0x9cfd74d0]
[ 0.009933] ACPI: Reserving SSDT table memory at [mem 0x9cfcf000-0x9cfcf538]
[ 0.009934] ACPI: Reserving SSDT table memory at [mem 0x9cfce000-0x9cfcead7]
[ 0.009935] ACPI: Reserving SSDT table memory at [mem 0x9cfca000-0x9cfcd82b]
[ 0.009936] ACPI: Reserving DMAR table memory at [mem 0x9cfc8000-0x9cfc80b7]
[ 0.009937] ACPI: Reserving BGRT table memory at [mem 0x9cfc9000-0x9cfc9037]
[ 0.009988] No NUMA configuration found
[ 0.009989] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
[ 0.009993] NODE_DATA(0) allocated [mem 0x45f5fc000-0x45f5fffff]
[ 0.010023] Zone ranges:
[ 0.010024] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.010026] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.010027] Normal [mem 0x0000000100000000-0x000000045f5fffff]
[ 0.010029] Device empty
[ 0.010030] Movable zone start for each node
[ 0.010031] Early memory node ranges
[ 0.010031] node 0: [mem 0x0000000000001000-0x000000000006efff]
[ 0.010033] node 0: [mem 0x0000000000070000-0x0000000000087fff]
[ 0.010034] node 0: [mem 0x0000000000100000-0x0000000096c7ffff]
[ 0.010035] node 0: [mem 0x0000000098080000-0x000000009c68efff]
[ 0.010036] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
[ 0.010037] node 0: [mem 0x0000000100000000-0x000000045f5fffff]
[ 0.010040] Initmem setup node 0 [mem 0x0000000000001000-0x000000045f5fffff]
[ 0.010044] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.010046] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.010068] On node 0, zone DMA: 120 pages in unavailable ranges
[ 0.014383] On node 0, zone DMA32: 5120 pages in unavailable ranges
[ 0.014417] On node 0, zone DMA32: 2416 pages in unavailable ranges
[ 0.038885] On node 0, zone Normal: 12288 pages in unavailable ranges
[ 0.038919] On node 0, zone Normal: 2560 pages in unavailable ranges
[ 0.038926] Reserving Intel graphics memory at [mem 0x9da00000-0x9f9fffff]
[ 0.039084] ACPI: PM-Timer IO Port: 0x1808
[ 0.039099] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.039102] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.039104] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.039108] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.039109] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.039118] e820: update [mem 0x98a3e000-0x98b38fff] usable ==> reserved
[ 0.039129] TSC deadline timer available
[ 0.039130] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.039150] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.039153] PM: hibernation: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.039155] PM: hibernation: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.039156] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.039157] PM: hibernation: Registered nosave memory: [mem 0x95ae1000-0x95ae1fff]
[ 0.039159] PM: hibernation: Registered nosave memory: [mem 0x95af1000-0x95af1fff]
[ 0.039160] PM: hibernation: Registered nosave memory: [mem 0x95af2000-0x95af2fff]
[ 0.039162] PM: hibernation: Registered nosave memory: [mem 0x95b02000-0x95b02fff]
[ 0.039164] PM: hibernation: Registered nosave memory: [mem 0x96c80000-0x9807ffff]
[ 0.039166] PM: hibernation: Registered nosave memory: [mem 0x98a3e000-0x98b38fff]
[ 0.039167] PM: hibernation: Registered nosave memory: [mem 0x9c68f000-0x9ce8efff]
[ 0.039168] PM: hibernation: Registered nosave memory: [mem 0x9ce8f000-0x9cf8efff]
[ 0.039169] PM: hibernation: Registered nosave memory: [mem 0x9cf8f000-0x9cffefff]
[ 0.039171] PM: hibernation: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.039172] PM: hibernation: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.039173] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.039173] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.039174] PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.039175] PM: hibernation: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.039176] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.039177] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.039177] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.039178] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.039179] PM: hibernation: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.039181] [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.039182] Booting paravirtualized kernel on bare hardware
[ 0.039184] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.045135] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.045356] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[ 0.045364] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[ 0.045366] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.045390] Fallback order for Node 0: 0
[ 0.045393] Built 1 zonelists, mobility grouping on. Total pages: 4106477
[ 0.045394] Policy zone: Normal
[ 0.045396] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-zen.img cryptdevice=PARTUUID=e08e9aff-9123-4da4-91c2-b613eecc907b:luksdev root=/dev/mapper/luksdev zswap.enabled=0 rootflags=subvol=@ rw intel_pstate=no_hwp rootfstype=btrfs
[ 0.045478] Unknown kernel command line parameters "cryptdevice=PARTUUID=e08e9aff-9123-4da4-91c2-b613eecc907b:luksdev", will be passed to user space.
[ 0.046353] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.046780] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.046974] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.099300] Memory: 16185160K/16687192K available (16391K kernel code, 2125K rwdata, 10948K rodata, 1876K init, 3188K bss, 501772K reserved, 0K cma-reserved)
[ 0.099444] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.099457] Kernel/User page tables isolation: enabled
[ 0.099476] ftrace: allocating 42874 entries in 168 pages
[ 0.107244] ftrace: allocated 168 pages with 3 groups
[ 0.107313] Dynamic Preempt: full
[ 0.107343] rcu: Preemptible hierarchical RCU implementation.
[ 0.107344] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.107345] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.107346] Trampoline variant of Tasks RCU enabled.
[ 0.107347] Rude variant of Tasks RCU enabled.
[ 0.107347] Tracing variant of Tasks RCU enabled.
[ 0.107348] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.107349] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.111612] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.111878] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.111919] Console: colour dummy device 80x25
[ 0.111933] printk: console [tty0] enabled
[ 0.111954] ACPI: Core revision 20211217
[ 0.112114] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.112127] APIC: Switch to symmetric I/O mode setup
[ 0.112129] DMAR: Host address width 39
[ 0.112130] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.112134] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.112137] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.112140] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.112141] DMAR: RMRR base: 0x0000009cdbf000 end: 0x0000009cddefff
[ 0.112143] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
[ 0.112145] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.112147] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.112148] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.112686] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.112687] x2apic enabled
[ 0.112693] Switched APIC routing to cluster x2apic.
[ 0.113113] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.117129] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f317cc502, max_idle_ns: 440795316211 ns
[ 0.117134] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.00 BogoMIPS (lpj=2494002)
[ 0.117137] pid_max: default: 32768 minimum: 301
[ 0.121159] LSM: Security Framework initializing
[ 0.121168] landlock: Up and running.
[ 0.121170] Yama: becoming mindful.
[ 0.121176] LSM support for eBPF active
[ 0.121218] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.121246] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.121502] process: using mwait in idle threads
[ 0.121505] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.121507] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.121511] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.121514] Spectre V2 : Mitigation: Retpolines
[ 0.121515] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.121515] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.121517] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.121518] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.121519] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.121522] SRBDS: Mitigation: Microcode
[ 0.121523] MDS: Mitigation: Clear CPU buffers
[ 0.127149] Freeing SMP alternatives memory: 44K
[ 0.127676] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1351
[ 0.127684] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.127826] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.127828] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.127842] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.127857] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.127868] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.127885] ... version: 3
[ 0.127886] ... bit width: 48
[ 0.127887] ... generic registers: 4
[ 0.127887] ... value mask: 0000ffffffffffff
[ 0.127888] ... max period: 00007fffffffffff
[ 0.127889] ... fixed-purpose events: 3
[ 0.127890] ... event mask: 000000070000000f
[ 0.128011] rcu: Hierarchical SRCU implementation.
[ 0.128344] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.128424] smp: Bringing up secondary CPUs ...
[ 0.128518] x86: Booting SMP configuration:
[ 0.128519] .... node #0, CPUs: #1
[ 0.130151] MDS CPU bug present and SMT on, data leak possible. See [url]https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html[/url] for more details.
[ 0.130273] #2 #3 #4 #5 #6 #7
[ 0.138602] smp: Brought up 1 node, 8 CPUs
[ 0.138602] smpboot: Max logical packages: 1
[ 0.138602] smpboot: Total of 8 processors activated (39904.03 BogoMIPS)
[ 0.139626] devtmpfs: initialized
[ 0.139626] x86/mm: Memory block size: 128MB
[ 0.140799] ACPI: PM: Registering ACPI NVS region [mem 0x9ce8f000-0x9cf8efff] (1048576 bytes)
[ 0.140799] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.140799] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.140799] pinctrl core: initialized pinctrl subsystem
[ 0.140799] PM: RTC time: 07:16:24, date: 2022-06-24
[ 0.141388] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.141616] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.141753] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.141901] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.141923] audit: initializing netlink subsys (disabled)
[ 0.141937] audit: type=2000 audit(1656054984.029:1): state=initialized audit_enabled=0 res=1
[ 0.141937] thermal_sys: Registered thermal governor 'fair_share'
[ 0.141937] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.141937] thermal_sys: Registered thermal governor 'step_wise'
[ 0.141937] thermal_sys: Registered thermal governor 'user_space'
[ 0.141937] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.141937] cpuidle: using governor ladder
[ 0.141937] cpuidle: using governor menu
[ 0.142141] Simple Boot Flag at 0x44 set to 0x1
[ 0.142162] HugeTLB: can free 4095 vmemmap pages for hugepages-1048576kB
[ 0.142166] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.142167] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.142229] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.142234] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.142252] PCI: Using configuration type 1 for base access
[ 0.142301] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.142473] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.143767] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.143775] HugeTLB: can free 7 vmemmap pages for hugepages-2048kB
[ 0.143775] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.143775] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.144170] ACPI: Added _OSI(Module Device)
[ 0.144172] ACPI: Added _OSI(Processor Device)
[ 0.144173] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.144174] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.144175] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.144176] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.144177] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.159534] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.160825] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.165931] ACPI: Dynamic OEM Table Load:
[ 0.165939] ACPI: SSDT 0xFFFF8EF141427400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.166942] ACPI: Dynamic OEM Table Load:
[ 0.166949] ACPI: SSDT 0xFFFF8EF1412C9000 0005AA (v01 PmRef ApIst 00003000 INTL 20120913)
[ 0.168008] ACPI: Dynamic OEM Table Load:
[ 0.168014] ACPI: SSDT 0xFFFF8EF1412A6C00 000119 (v01 PmRef ApCst 00003000 INTL 20120913)
[ 0.170915] ACPI: Interpreter enabled
[ 0.170947] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.170949] ACPI: Using IOAPIC for interrupt routing
[ 0.170983] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.171277] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 0.171295] ACPI: Enabled 11 GPEs in block 00 to 3F
[ 0.183243] ACPI: PM: Power Resource [FN00]
[ 0.183802] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.183808] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.183888] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.183891] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.183892] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[ 0.184557] PCI host bridge to bus 0000:00
[ 0.184559] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.184561] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.184563] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[ 0.184564] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.184566] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.184578] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.184643] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.184652] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[ 0.184658] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.184662] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.184674] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.184677] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.184746] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.184754] pci 0000:00:03.0: reg 0x10: [mem 0xb0810000-0xb0813fff 64bit]
[ 0.184855] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.184871] pci 0000:00:14.0: reg 0x10: [mem 0xb0800000-0xb080ffff 64bit]
[ 0.184929] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.184998] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.185014] pci 0000:00:16.0: reg 0x10: [mem 0xb0818000-0xb081800f 64bit]
[ 0.185073] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.185128] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.185145] pci 0000:00:1a.0: reg 0x10: [mem 0xb081d000-0xb081d3ff]
[ 0.185226] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.185298] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.185314] pci 0000:00:1b.0: reg 0x10: [mem 0xb0814000-0xb0817fff 64bit]
[ 0.185384] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.185455] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.185529] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.185903] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.185977] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.186332] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.186406] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.186763] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.186779] pci 0000:00:1d.0: reg 0x10: [mem 0xb081c000-0xb081c3ff]
[ 0.186861] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.186935] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.187096] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.187108] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.187116] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.187123] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.187130] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.187138] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.187145] pci 0000:00:1f.2: reg 0x24: [mem 0xb081b000-0xb081b7ff]
[ 0.187180] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.187242] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.187258] pci 0000:00:1f.3: reg 0x10: [mem 0xb0819000-0xb08190ff 64bit]
[ 0.187278] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.187405] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.187426] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.187454] pci 0000:01:00.0: reg 0x18: [mem 0xb0700000-0xb0700fff 64bit]
[ 0.187471] pci 0000:01:00.0: reg 0x20: [mem 0xb0400000-0xb0403fff 64bit pref]
[ 0.187579] pci 0000:01:00.0: supports D1 D2
[ 0.187580] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187709] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.187714] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.187717] pci 0000:00:1c.0: bridge window [mem 0xb0700000-0xb07fffff]
[ 0.187722] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.187839] pci 0000:02:00.0: [8086:08b3] type 00 class 0x028000
[ 0.187895] pci 0000:02:00.0: reg 0x10: [mem 0xb0600000-0xb0601fff 64bit]
[ 0.188168] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.188405] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.188410] pci 0000:00:1c.1: bridge window [mem 0xb0600000-0xb06fffff]
[ 0.188475] pci 0000:03:00.0: [10ec:5249] type 00 class 0xff0000
[ 0.188496] pci 0000:03:00.0: reg 0x10: [mem 0xb0500000-0xb0500fff]
[ 0.188644] pci 0000:03:00.0: supports D1 D2
[ 0.188645] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.188770] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.188775] pci 0000:00:1c.2: bridge window [mem 0xb0500000-0xb05fffff]
[ 0.189842] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.189844] ACPI: PCI: Interrupt link LNKA disabled
[ 0.189912] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.189913] ACPI: PCI: Interrupt link LNKB disabled
[ 0.189980] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.189981] ACPI: PCI: Interrupt link LNKC disabled
[ 0.190047] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.190049] ACPI: PCI: Interrupt link LNKD disabled
[ 0.190118] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.190119] ACPI: PCI: Interrupt link LNKE disabled
[ 0.190186] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.190187] ACPI: PCI: Interrupt link LNKF disabled
[ 0.190251] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.190252] ACPI: PCI: Interrupt link LNKG disabled
[ 0.190315] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.190316] ACPI: PCI: Interrupt link LNKH disabled
[ 0.190737] iommu: Default domain type: Translated
[ 0.190739] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.190874] SCSI subsystem initialized
[ 0.190883] libata version 3.00 loaded.
[ 0.190883] ACPI: bus type USB registered
[ 0.190883] usbcore: registered new interface driver usbfs
[ 0.190883] usbcore: registered new interface driver hub
[ 0.190883] usbcore: registered new device driver usb
[ 0.190883] pps_core: LinuxPPS API ver. 1 registered
[ 0.190883] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.190883] PTP clock support registered
[ 0.190883] EDAC MC: Ver: 3.0.0
[ 0.190883] Registered efivars operations
[ 0.191278] NetLabel: Initializing
[ 0.191279] NetLabel: domain hash size = 128
[ 0.191280] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.191294] NetLabel: unlabeled traffic allowed by default
[ 0.191297] mctp: management component transport protocol core
[ 0.191298] NET: Registered PF_MCTP protocol family
[ 0.191302] PCI: Using ACPI for IRQ routing
[ 0.196993] PCI: pci_cache_line_size set to 64 bytes
[ 0.197060] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.197062] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.197063] e820: reserve RAM buffer [mem 0x95ae1018-0x97ffffff]
[ 0.197065] e820: reserve RAM buffer [mem 0x95af2018-0x97ffffff]
[ 0.197066] e820: reserve RAM buffer [mem 0x96c80000-0x97ffffff]
[ 0.197067] e820: reserve RAM buffer [mem 0x98a3e000-0x9bffffff]
[ 0.197068] e820: reserve RAM buffer [mem 0x9c68f000-0x9fffffff]
[ 0.197070] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.197071] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
[ 0.197083] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.197083] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.197083] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.197083] vgaarb: loaded
[ 0.198085] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.198094] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.199187] clocksource: Switched to clocksource tsc-early
[ 0.207843] VFS: Disk quotas dquot_6.6.0
[ 0.207856] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.207931] pnp: PnP ACPI init
[ 0.208125] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.208129] system 00:00: [io 0xffff] has been reserved
[ 0.208131] system 00:00: [io 0xffff] has been reserved
[ 0.208149] system 00:00: [io 0xffff] has been reserved
[ 0.208151] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.208152] system 00:00: [io 0x0800-0x08fe] has been reserved
[ 0.208154] system 00:00: [io 0x0900-0x09fe] has been reserved
[ 0.208155] system 00:00: [io 0x0a00-0x0afe] has been reserved
[ 0.208156] system 00:00: [io 0x0b00-0x0bfe] has been reserved
[ 0.208158] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.208159] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.208221] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.208301] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.208595] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.208598] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.208600] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.208602] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.208604] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.208606] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.208608] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.208609] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.208611] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.208613] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.208614] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.208616] system 00:06: [mem 0xff700000-0xff7001ff] has been reserved
[ 0.209380] pnp: PnP ACPI: found 7 devices
[ 0.215081] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.215140] NET: Registered PF_INET protocol family
[ 0.215290] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.217524] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.217557] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.217627] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.217803] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.217886] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.217960] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.218041] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.218085] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.218146] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.218151] NET: Registered PF_XDP protocol family
[ 0.218162] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.218166] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.218172] pci 0000:00:1c.0: bridge window [mem 0xb0700000-0xb07fffff]
[ 0.218176] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.218182] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.218186] pci 0000:00:1c.1: bridge window [mem 0xb0600000-0xb06fffff]
[ 0.218193] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.218198] pci 0000:00:1c.2: bridge window [mem 0xb0500000-0xb05fffff]
[ 0.218206] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.218207] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.218209] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
[ 0.218210] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[ 0.218212] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.218213] pci_bus 0000:01: resource 1 [mem 0xb0700000-0xb07fffff]
[ 0.218215] pci_bus 0000:01: resource 2 [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.218216] pci_bus 0000:02: resource 1 [mem 0xb0600000-0xb06fffff]
[ 0.218218] pci_bus 0000:03: resource 1 [mem 0xb0500000-0xb05fffff]
[ 0.231251] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7a0 took 11249 usecs
[ 0.243263] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7a0 took 11709 usecs
[ 0.243300] PCI: CLS 64 bytes, default 64
[ 0.243317] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.243318] software IO TLB: mapped [mem 0x0000000091090000-0x0000000095090000] (64MB)
[ 0.243348] Trying to unpack rootfs image as initramfs...
[ 0.250593] Initialise system trusted keyrings
[ 0.250603] Key type blacklist registered
[ 0.250650] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.251855] zbud: loaded
[ 0.252054] integrity: Platform Keyring initialized
[ 0.252058] integrity: Machine keyring initialized
[ 0.264279] Key type asymmetric registered
[ 0.264282] Asymmetric key parser 'x509' registered
[ 0.326999] Freeing initrd memory: 18796K
[ 0.329423] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.329441] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.329472] io scheduler mq-deadline registered
[ 0.329474] io scheduler kyber registered
[ 0.329502] io scheduler bfq registered
[ 0.330298] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.330917] ACPI: AC: AC Adapter [ADP0] (on-line)
[ 0.330972] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.330989] ACPI: button: Power Button [PWRB]
[ 0.331013] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.331040] ACPI: button: Lid Switch [LID0]
[ 0.331063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.331081] ACPI: button: Power Button [PWRF]
[ 0.332092] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.332095] ACPI: thermal: Thermal Zone [THRM] (67 C)
[ 0.332257] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.332806] ACPI: battery: Slot [BAT0] (battery present)
[ 0.333599] Non-volatile memory driver v1.3
[ 0.333601] Linux agpgart interface v0.103
[ 0.333602] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.334013] ahci 0000:00:1f.2: version 3.0
[ 0.334177] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[ 0.334181] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.338685] scsi host0: ahci
[ 0.338943] scsi host1: ahci
[ 0.339127] scsi host2: ahci
[ 0.339323] scsi host3: ahci
[ 0.339443] scsi host4: ahci
[ 0.339477] ata1: DUMMY
[ 0.339478] ata2: DUMMY
[ 0.339480] ata3: SATA max UDMA/133 abar m2048@0xb081b000 port 0xb081b200 irq 29
[ 0.339482] ata4: DUMMY
[ 0.339484] ata5: SATA max UDMA/133 abar m2048@0xb081b000 port 0xb081b300 irq 29
[ 0.339527] ACPI: bus type drm_connector registered
[ 0.339836] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.339839] ehci-pci: EHCI PCI platform driver
[ 0.339947] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.339952] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.339962] ehci-pci 0000:00:1a.0: debug port 2
[ 0.343870] ehci-pci 0000:00:1a.0: irq 21, io mem 0xb081d000
[ 0.350191] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.350243] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 0.350246] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.350248] usb usb1: Product: EHCI Host Controller
[ 0.350250] usb usb1: Manufacturer: Linux 5.18.4-zen1-1-zen ehci_hcd
[ 0.350251] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.350420] hub 1-0:1.0: USB hub found
[ 0.350426] hub 1-0:1.0: 2 ports detected
[ 0.350721] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.350726] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.350737] ehci-pci 0000:00:1d.0: debug port 2
[ 0.354644] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb081c000
[ 0.361195] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.361255] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 0.361259] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.361261] usb usb2: Product: EHCI Host Controller
[ 0.361263] usb usb2: Manufacturer: Linux 5.18.4-zen1-1-zen ehci_hcd
[ 0.361264] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.361459] hub 2-0:1.0: USB hub found
[ 0.361466] hub 2-0:1.0: 2 ports detected
[ 0.361626] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.361631] ohci-pci: OHCI PCI platform driver
[ 0.361643] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.361676] usbcore: registered new interface driver usbserial_generic
[ 0.361680] usbserial: USB Serial support registered for generic
[ 0.361970] rtc_cmos 00:02: RTC can wake from S4
[ 0.362204] rtc_cmos 00:02: registered as rtc0
[ 0.362234] rtc_cmos 00:02: setting system clock to 2022-06-24T07:16:25 UTC (1656054985)
[ 0.362248] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.362285] intel_pstate: Intel P-state driver initializing
[ 0.362726] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.362850] efifb: probing for efifb
[ 0.362862] efifb: framebuffer at 0xa0000000, using 8100k, total 8100k
[ 0.362864] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.362866] efifb: scrolling: redraw
[ 0.362867] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.362923] fbcon: Deferring console take-over
[ 0.362925] fb0: EFI VGA frame buffer device
[ 0.362953] hid: raw HID events driver (C) Jiri Kosina
[ 0.363065] drop_monitor: Initializing network drop monitor service
[ 0.378037] Initializing XFRM netlink socket
[ 0.378115] NET: Registered PF_INET6 protocol family
[ 0.381036] Segment Routing with IPv6
[ 0.381038] RPL Segment Routing with IPv6
[ 0.381045] In-situ OAM (IOAM) with IPv6
[ 0.381063] NET: Registered PF_PACKET protocol family
[ 0.381587] microcode: sig=0x306c3, pf=0x20, revision=0x28
[ 0.381677] microcode: Microcode Update Driver: v2.2.
[ 0.381683] IPI shorthand broadcast: enabled
[ 0.381692] sched_clock: Marking stable (381194936, 327973)->(395502105, -13979196)
[ 0.381953] registered taskstats version 1
[ 0.382084] Loading compiled-in X.509 certificates
[ 0.384757] Loaded X.509 cert 'Build time autogenerated kernel key: 22c2b535ad7072b70c252f3103c87c6dbf45a732'
[ 0.385092] zswap: loaded using pool lz4/z3fold
[ 0.385211] Key type ._fscrypt registered
[ 0.385212] Key type .fscrypt registered
[ 0.385212] Key type fscrypt-provisioning registered
[ 0.386851] integrity: Loading X.509 certificate: UEFI:db
[ 0.386889] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.386890] integrity: Loading X.509 certificate: UEFI:db
[ 0.386909] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.386909] integrity: Loading X.509 certificate: UEFI:db
[ 0.386911] integrity: Problem loading X.509 certificate -65
[ 0.386915] fbcon: Taking over console
[ 0.386963] Console: switching to colour frame buffer device 240x67
[ 0.388451] integrity: Error adding keys to platform keyring UEFI:db
[ 0.388452] integrity: Loading X.509 certificate: UEFI:db
[ 0.389054] integrity: Loaded X.509 cert 'Toshiba Corporation Utility CA 2012: cc37e82804de6d8242718850b1af8d5f'
[ 0.391868] PM: Magic number: 10:264:269
[ 0.391928] memory memory139: hash matches
[ 0.392024] RAS: Correctable Errors collector initialized.
[ 0.593202] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.601198] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.645380] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.645405] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.647286] ata3.00: ATAPI: MATSHITABD-MLT UJ272, 1.02, max UDMA/133
[ 0.648773] ata3.00: configured for UDMA/133
[ 0.650353] scsi 2:0:0:0: CD-ROM MATSHITA BD-MLT UJ272 1.02 PQ: 0 ANSI: 5
[ 0.715293] ata5.00: ATA-8: TOSHIBA MQ01ABD100H, AUF02M, max UDMA/100
[ 0.715681] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.717599] ata5.00: configured for UDMA/100
[ 0.718271] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 2M PQ: 0 ANSI: 5
[ 0.718921] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.718925] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 0.718939] sd 4:0:0:0: [sda] Write Protect is off
[ 0.718943] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.718962] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.721605] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 0.721608] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.721881] hub 1-1:1.0: USB hub found
[ 0.721970] hub 1-1:1.0: 6 ports detected
[ 0.729933] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 0.729940] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.730273] hub 2-1:1.0: USB hub found
[ 0.730361] hub 2-1:1.0: 8 ports detected
[ 0.734327] sda: sda1 sda2
[ 0.740717] sd 4:0:0:0: [sda] Attached SCSI disk
[ 0.741938] Freeing unused decrypted memory: 2036K
[ 0.742256] Freeing unused kernel image (initmem) memory: 1876K
[ 0.742298] Write protecting the kernel read-only data: 30720k
[ 0.742765] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.743053] Freeing unused kernel image (rodata/data gap) memory: 1340K
[ 0.807418] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.807422] rodata_test: all tests were successful
[ 0.807423] x86/mm: Checking user space page tables
[ 0.848832] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.848835] Run /init as init process
[ 0.848836] with arguments:
[ 0.848837] /init
[ 0.848837] with environment:
[ 0.848838] HOME=/
[ 0.848839] TERM=linux
[ 0.848839] cryptdevice=PARTUUID=e08e9aff-9123-4da4-91c2-b613eecc907b:luksdev
[ 0.924629] raid6: skipped pq benchmark and selected avx2x4
[ 0.924631] raid6: using avx2x2 recovery algorithm
[ 0.927477] xor: automatically using best checksumming function avx
[ 0.982787] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[ 1.001151] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[ 1.059729] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.062067] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.062103] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.065238] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.065246] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.066322] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 1.066517] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.066521] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.066525] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.066566] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 1.066569] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.066571] usb usb3: Product: xHCI Host Controller
[ 1.066573] usb usb3: Manufacturer: Linux 5.18.4-zen1-1-zen xhci-hcd
[ 1.066575] usb usb3: SerialNumber: 0000:00:14.0
[ 1.066683] hub 3-0:1.0: USB hub found
[ 1.066702] hub 3-0:1.0: 14 ports detected
[ 1.069266] cryptd: max_cpu_qlen set to 1000
[ 1.071848] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[ 1.071853] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.071855] usb usb4: Product: xHCI Host Controller
[ 1.071857] usb usb4: Manufacturer: Linux 5.18.4-zen1-1-zen xhci-hcd
[ 1.071859] usb usb4: SerialNumber: 0000:00:14.0
[ 1.071962] hub 4-0:1.0: USB hub found
[ 1.071974] hub 4-0:1.0: 4 ports detected
[ 1.083110] usb 1-1.2: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[ 1.083116] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.083312] AVX2 version of gcm_enc/dec engaged.
[ 1.083357] AES CTR mode by8 optimization enabled
[ 1.093005] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.093011] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.114783] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.131311] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.147186] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 1.284841] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b448, bcdDevice=49.02
[ 1.284847] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.284849] usb 1-1.3: Product: TOSHIBA Web Camera - HD
[ 1.284850] usb 1-1.3: Manufacturer: Namuga
[ 1.295215] tsc: Refined TSC clocksource calibration: 2494.223 MHz
[ 1.295223] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e8602d1, max_idle_ns: 440795241926 ns
[ 1.295246] clocksource: Switched to clocksource tsc
[ 1.373582] device-mapper: uevent: version 1.0.3
[ 1.373693] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com
[ 1.398696] Key type encrypted registered
[ 22.922229] BTRFS: device fsid 260b9ee1-1e9f-469e-83ef-c1996cf8206d devid 1 transid 2052 /dev/dm-0 scanned by systemd-udevd (822)
[ 22.993103] BTRFS info (device dm-0): flagging fs with big metadata feature
[ 22.993108] BTRFS info (device dm-0): using free space tree
[ 22.993109] BTRFS info (device dm-0): has skinny extents
[ 23.003402] BTRFS info (device dm-0): start tree-log replay
[ 23.094165] BTRFS info (device dm-0): checking UUID tree
[ 23.395450] systemd[1]: Successfully credited entropy passed from boot loader.
[ 23.399702] systemd[1]: systemd 251.2-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 23.399708] systemd[1]: Detected architecture x86-64.
[ 23.468641] systemd-fstab-generator[861]: Mount point is not a valid path, ignoring.
[ 23.475951] systemd-fstab-generator[861]: Mount point is not a valid path, ignoring.
[ 23.476036] systemd-fstab-generator[861]: Mount point is not a valid path, ignoring.
[ 23.476106] systemd-fstab-generator[861]: Mount point is not a valid path, ignoring.
[ 23.476202] systemd-fstab-generator[861]: Mount point is not a valid path, ignoring.
[ 23.476274] systemd-fstab-generator[861]: Mount point is not a valid path, ignoring.
[ 23.493218] zram: Added device: zram0
[ 23.567611] systemd[1]: Queued start job for default target Graphical Interface.
[ 23.568486] systemd[1]: Created slice Slice /system/getty.
[ 23.568761] systemd[1]: Created slice Slice /system/modprobe.
[ 23.568986] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 23.569218] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[ 23.569416] systemd[1]: Created slice User and Session Slice.
[ 23.569507] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 23.569577] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 23.569715] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 23.569779] systemd[1]: Reached target Local Encrypted Volumes.
[ 23.569818] systemd[1]: Reached target Login Prompts.
[ 23.569853] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 23.569901] systemd[1]: Reached target Path Units.
[ 23.569937] systemd[1]: Reached target Remote File Systems.
[ 23.569971] systemd[1]: Reached target Slice Units.
[ 23.570016] systemd[1]: Reached target Local Verity Protected Volumes.
[ 23.570092] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 23.570702] systemd[1]: Listening on LVM2 poll daemon socket.
[ 23.571701] systemd[1]: Listening on Process Core Dump Socket.
[ 23.571878] systemd[1]: Listening on Journal Audit Socket.
[ 23.571989] systemd[1]: Listening on Journal Socket (/dev/log).
[ 23.572102] systemd[1]: Listening on Journal Socket.
[ 23.573395] systemd[1]: Listening on udev Control Socket.
[ 23.573529] systemd[1]: Listening on udev Kernel Socket.
[ 23.574359] systemd[1]: Mounting Huge Pages File System...
[ 23.575038] systemd[1]: Mounting POSIX Message Queue File System...
[ 23.575687] systemd[1]: Mounting Kernel Debug File System...
[ 23.576371] systemd[1]: Mounting Kernel Trace File System...
[ 23.577089] systemd[1]: Starting Create List of Static Device Nodes...
[ 23.577790] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 23.578705] systemd[1]: Starting Load Kernel Module configfs...
[ 23.579404] systemd[1]: Starting Load Kernel Module drm...
[ 23.580106] systemd[1]: Starting Load Kernel Module fuse...
[ 23.581526] systemd[1]: Starting Journal Service...
[ 23.597822] systemd[1]: Starting Load Kernel Modules...
[ 23.598527] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 23.598616] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[ 23.599198] systemd[1]: Starting Coldplug All udev Devices...
[ 23.600399] systemd[1]: Mounted Huge Pages File System.
[ 23.600515] systemd[1]: Mounted POSIX Message Queue File System.
[ 23.600613] systemd[1]: Mounted Kernel Debug File System.
[ 23.600708] systemd[1]: Mounted Kernel Trace File System.
[ 23.600883] systemd[1]: Finished Create List of Static Device Nodes.
[ 23.601173] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 23.601268] systemd[1]: Finished Load Kernel Module configfs.
[ 23.601487] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 23.601572] systemd[1]: Finished Load Kernel Module drm.
[ 23.602355] systemd[1]: Mounting Kernel Configuration File System...
[ 23.603966] systemd[1]: Mounted Kernel Configuration File System.
[ 23.610357] fuse: init (API version 7.36)
[ 23.610963] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 23.611081] systemd[1]: Finished Load Kernel Module fuse.
[ 23.611192] audit: type=1130 audit(1656055008.748:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.611199] audit: type=1131 audit(1656055008.748:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.611959] systemd[1]: Mounting FUSE Control File System...
[ 23.613910] systemd[1]: Mounted FUSE Control File System.
[ 23.622395] Asymmetric key parser 'pkcs8' registered
[ 23.623141] systemd[1]: Finished Load Kernel Modules.
[ 23.623230] audit: type=1130 audit(1656055008.760:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.623937] systemd[1]: Starting Apply Kernel Variables...
[ 23.634859] systemd[1]: Started Journal Service.
[ 23.635357] audit: type=1130 audit(1656055008.772:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.684694] audit: type=1130 audit(1656055008.821:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.689041] BTRFS info (device dm-0: state M): using free space tree
[ 23.690266] audit: type=1130 audit(1656055008.827:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.699036] audit: type=1130 audit(1656055008.835:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.722218] audit: type=1130 audit(1656055008.859:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.735769] audit: type=1130 audit(1656055008.872:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.736622] audit: type=1334 audit(1656055008.873:11): prog-id=9 op=LOAD
[ 23.843738] zram0: detected capacity change from 0 to 8388608
[ 23.915698] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 23.916282] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 23.924014] EDAC ie31200: No ECC support
[ 23.924047] EDAC ie31200: No ECC support
[ 23.924534] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20211217/utaddress-204)
[ 23.924541] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 23.924545] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20211217/utaddress-204)
[ 23.924549] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 23.924551] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20211217/utaddress-204)
[ 23.924555] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20211217/utaddress-204)
[ 23.924558] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 23.924559] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20211217/utaddress-204)
[ 23.924563] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20211217/utaddress-204)
[ 23.924567] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20211217/utaddress-204)
[ 23.924571] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 23.924571] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 23.926563] BTRFS info: devid 1 device path /dev/mapper/luksdev changed to /dev/dm-0 scanned by systemd-udevd (893)
[ 23.927098] BTRFS info: devid 1 device path /dev/dm-0 changed to /dev/mapper/luksdev scanned by systemd-udevd (893)
[ 23.938195] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 23.938235] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 23.938238] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 23.939936] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 23.942775] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 23.967810] Adding 4194300k swap on /dev/zram0. Priority:100 extents:1 across:4194300k SSDscFS
[ 23.974613] systemd-journald[881]: Received client request to flush runtime journal.
[ 23.979404] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[ 24.000967] systemd-journald[881]: File /var/log/journal/bbeaa67862ee46fa85f97d7829d4301a/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 24.112914] mc: Linux media interface: v0.10
[ 24.131658] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 24.131886] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 24.212734] at24 0-0050: supply vcc not found, using dummy regulator
[ 24.213388] at24 0-0050: 256 byte spd EEPROM, read-only
[ 24.236267] Bluetooth: Core ver 2.22
[ 24.236283] NET: Registered PF_BLUETOOTH protocol family
[ 24.236283] Bluetooth: HCI device and connection manager initialized
[ 24.236287] Bluetooth: HCI socket layer initialized
[ 24.236288] Bluetooth: L2CAP socket layer initialized
[ 24.236291] Bluetooth: SCO socket layer initialized
[ 24.263752] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 24.263757] cfg80211: failed to load regulatory.db
[ 24.264719] iTCO_vendor_support: vendor-support=0
[ 24.281398] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 24.285202] videodev: Linux video capture interface: v2.00
[ 24.290706] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 24.290710] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 24.290712] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 24.290713] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 24.290714] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 24.293474] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 24.293578] r8169 0000:01:00.0 eth0: RTL8168g/8111g, 00:8c:fa:88:a3:d9, XID 4c0, IRQ 33
[ 24.293584] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 24.293585] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ 24.295807] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 24.309595] Intel(R) Wireless WiFi driver for Linux
[ 24.324220] spi-nor spi0.0: mx25l6405d (8192 Kbytes)
[ 24.343676] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 3160-17.ucode op_mode iwlmvm
[ 24.346537] Creating 1 MTD partitions on "intel-spi":
[ 24.346543] 0x000000000000-0x000000800000 : "BIOS"
[ 24.395267] usb 1-1.3: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 24.419971] input: TOSHIBA Web Camera - HD: TOSHIB as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7
[ 24.420044] usbcore: registered new interface driver uvcvideo
[ 24.427363] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 24.427370] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.427373] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 24.427375] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 24.427377] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 24.427379] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 24.427381] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 24.439144] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 24.439211] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 24.448337] checking generic (a0000000 7e9000) vs hw (b0000000 400000)
[ 24.448342] checking generic (a0000000 7e9000) vs hw (a0000000 10000000)
[ 24.448343] fb0: switching to i915 from EFI VGA
[ 24.448463] Console: switching to colour dummy device 80x25
[ 24.448528] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 24.450344] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 24.452466] usbcore: registered new interface driver btusb
[ 24.465295] Bluetooth: hci0: Legacy ROM 2.5 revision 0.0 build 2 week 3 2013
[ 24.470930] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
[ 24.484488] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[ 24.502362] iwlwifi 0000:02:00.0: base HW address: 34:de:1a:57:e0:77, OTP minor version: 0x0
[ 24.509752] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 24.511725] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 24.512305] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 24.512467] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 24.524784] fbcon: i915drmfb (fb0) is primary device
[ 24.541955] intel_rapl_common: Found RAPL domain package
[ 24.541958] intel_rapl_common: Found RAPL domain core
[ 24.541959] intel_rapl_common: Found RAPL domain uncore
[ 24.541960] intel_rapl_common: Found RAPL domain dram
[ 24.541964] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 24.605930] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 24.693424] Bluetooth: hci0: Intel BT fw patch 0x56 completed & activated
[ 24.828080] psmouse serio1: synaptics: queried max coordinates: x [..5662], y [..4634]
[ 24.856627] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1300..]
[ 24.856637] psmouse serio1: synaptics: Your touchpad (PNP: TOS1151 SYN1900 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 24.911719] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800/0x0, board id: 3002, fw id: 1585219
[ 24.946979] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 24.953041] mousedev: PS/2 mouse device common for all mice
[ 25.646490] Console: switching to colour frame buffer device 240x67
[ 25.668812] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 25.674999] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 25.675048] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 25.675090] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 25.675142] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 25.675193] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 26.250208] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[ 26.415280] r8169 0000:01:00.0 enp1s0: Link is Down
[ 29.613353] kauditd_printk_skb: 40 callbacks suppressed
[ 29.613357] audit: type=1131 audit(1656055014.750:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 29.959992] wlan0: authenticate with 98:42:65:5d:d5:8a
[ 29.963049] wlan0: send auth to 98:42:65:5d:d5:8a (try 1/3)
[ 29.963925] wlan0: authenticated
[ 29.964147] wlan0: associate with 98:42:65:5d:d5:8a (try 1/3)
[ 29.965162] wlan0: RX AssocResp from 98:42:65:5d:d5:8a (capab=0x1011 status=0 aid=10)
[ 29.966701] wlan0: associated
[ 29.975239] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 98:42:65:5d:d5:8a
[ 30.138453] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 32.419404] audit: type=1130 audit(1656055017.556:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 32.421050] audit: type=1130 audit(1656055017.557:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nxserver comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 33.284162] audit: type=1100 audit(1656055018.420:53): pid=1115 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="jan" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 33.284393] audit: type=1101 audit(1656055018.421:54): pid=1115 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="jan" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 33.322689] audit: type=1106 audit(1656055018.459:55): pid=1066 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 33.322785] audit: type=1104 audit(1656055018.459:56): pid=1066 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 33.327334] audit: type=1103 audit(1656055018.464:57): pid=1115 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock acct="jan" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[ 33.327393] audit: type=1006 audit(1656055018.464:58): pid=1115 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 33.327398] audit: type=1300 audit(1656055018.464:58): arch=c000003e syscall=1 success=yes exit=4 a0=b a1=7ffc66033850 a2=4 a3=7ffc66033564 items=0 ppid=1043 pid=1115 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="lightdm" exe="/usr/bin/lightdm" key=(null)
[ 35.436894] kauditd_printk_skb: 13 callbacks suppressed
[ 35.436896] audit: type=1334 audit(1656055020.573:69): prog-id=19 op=LOAD
[ 35.436910] audit: type=1334 audit(1656055020.573:70): prog-id=20 op=LOAD
[ 36.218625] audit: type=1131 audit(1656055021.355:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 39.127620] audit: type=1130 audit(1656055024.264:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 39.975580] audit: type=1130 audit(1656055025.112:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 40.400373] audit: type=1105 audit(1656055025.537:74): pid=1494 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
[ 43.602723] audit: type=1131 audit(1656055028.739:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@972 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 43.612768] audit: type=1131 audit(1656055028.749:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@972 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 56.080713] audit: type=1131 audit(1656055040.723:77): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 56.110268] audit: type=1334 audit(1656055040.753:78): prog-id=0 op=UNLOAD
[ 56.110274] audit: type=1334 audit(1656055040.753:79): prog-id=0 op=UNLOAD
[ 56.110276] audit: type=1334 audit(1656055040.753:80): prog-id=0 op=UNLOAD
[ 64.912196] audit: type=1106 audit(1656055049.555:81): pid=1260 uid=970 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix acct="jan" exe="/usr/NX/bin/nxexec" hostname=? addr=? terminal=: res=success'
[ 64.929979] audit: type=1105 audit(1656055049.572:82): pid=2279 uid=970 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_unix acct="jan" exe="/usr/NX/bin/nxexec" hostname=? addr=? terminal=: res=success'
[ 824.651498] audit: type=1100 audit(1656055809.302:83): pid=2627 uid=1000 auid=1000 ses=3 msg='op=PAM:unix_chkpwd acct="jan" exe="/usr/bin/unix_chkpwd" hostname=? addr=? terminal=? res=success'
[ 935.128585] audit: type=1130 audit(1656055919.780:84): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 935.128590] audit: type=1131 audit(1656055919.780:85): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1191.082432] audit: type=1100 audit(1656056175.736:86): pid=2705 uid=1000 auid=1000 ses=3 msg='op=PAM:unix_chkpwd acct="jan" exe="/usr/bin/unix_chkpwd" hostname=? addr=? terminal=? res=success'
[ 1557.557403] audit: type=1100 audit(1656056542.214:87): pid=2783 uid=1000 auid=1000 ses=3 msg='op=PAM:unix_chkpwd acct="jan" exe="/usr/bin/unix_chkpwd" hostname=? addr=? terminal=? res=success'
[ 1567.355096] audit: type=1101 audit(1656056552.011:88): pid=2790 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="jan" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 1567.355900] audit: type=1110 audit(1656056552.012:89): pid=2790 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 1567.358612] audit: type=1105 audit(1656056552.015:90): pid=2790 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 1567.385678] audit: type=1106 audit(1656056552.042:91): pid=2790 uid=1000 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 1567.385725] audit: type=1104 audit(1656056552.042:92): pid=2790 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 1620.763073] audit: type=1101 audit(1656056605.420:93): pid=2823 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="jan" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 1620.763832] audit: type=1110 audit(1656056605.420:94): pid=2823 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 1620.765820] audit: type=1105 audit(1656056605.422:95): pid=2823 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 1625.536652] audit: type=1106 audit(1656056610.193:96): pid=2823 uid=1000 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 1625.536685] audit: type=1104 audit(1656056610.193:97): pid=2823 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 1633.257939] audit: type=1101 audit(1656056617.915:98): pid=2861 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="jan" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 1633.258683] audit: type=1110 audit(1656056617.915:99): pid=2861 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 1633.261155] audit: type=1105 audit(1656056617.918:100): pid=2861 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'Last edited by janvdplaats (2022-06-24 07:48:03)
Offline
#7 2022-06-24 07:47:46
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,569
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
https://bbs.archlinux.org/help.php#bbcode
Edit all three posts accordingly.
Offline
#8 2022-06-24 07:49:26
- janvdplaats
- Member
- Registered: 2022-06-24
- Posts: 7
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
my bad. i was referring to the official bbcode syntax which requires <> instead of []. post have been updated.
Offline
#9 2022-06-24 07:58:40
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,569
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
There's no trace of that device, neither unaccounted in lspci, nor any bus errors that might explain its absence.
You could try to lie to the BIOS and pass
acpi_osi=! acpi_osi="Windows 2009"to the kernel
Offline
#10 2022-06-24 08:06:26
- janvdplaats
- Member
- Registered: 2022-06-24
- Posts: 7
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
alright. i will try this with a clean install and see if it results into anything. thanks for your time.
it seems like the GPU is dead? correct?
Offline
#11 2022-06-24 08:16:55
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,569
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
You don't even need to re-install for that.
Does the BIOS list the GPU?
Offline
#12 2022-06-24 09:32:23
- janvdplaats
- Member
- Registered: 2022-06-24
- Posts: 7
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
i have no experience with systemd-boot and wanted to switch to grub.
the bios doesnt list any options regarding gpu.
edit: also i've added the parameters. nothing has changed.
Last edited by janvdplaats (2022-06-24 09:35:09)
Offline
#13 2022-06-24 12:56:43
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,569
Re: Unable to find my Dedicated AMDGPU. able to see integrated graphics
i have no idea what i could do to get this gpu recognized again
Did it work in the past (with archlinux)?
When?
Do you recall what happened between "recognized" and "dead"?
You could try the LTS kernel or a live system like grml (look into the archives for even older kernel versions) but I don't think this is a kernel bug.
Sanity check: is there a parallel windows installation on that system?
Offline