You are not logged in.
- Topics: Active | Unanswered
#1 2022-07-15 08:56:43
- andriii25
- Member
- Registered: 2017-06-23
- Posts: 5
Startx failing at first then automatically tries again and succeeds
So, on startup I have set up automatic login and automatic start.
However, when booting startx fails with an fatal server error, no screens found and it hangs there a few seconds. After that it automatically tries again and succeeds, launching into i3.
I would love to show the entire logfile but I suspect the second start overwrites it and no longer has the error message there. All in all, this is just slightly annoying and not system breaking, however I'm fairly sure something is indeed broken in my system.
I also can't quite quit i3 with Mod+Shift+E as after it exits it restarts in a few seconds, and this might be related.
All the relevant files that I could think of are here,
and thanks for all the help in advance.
~/.local/share/xorg/Xorg.0.log
[ 17.348]
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[ 17.348] Current Operating System: Linux izanami 5.18.11-arch1-1 #1 SMP PREEMPT_DYNAMIC Tue, 12 Jul 2022 15:40:51 +0000 x86_64
[ 17.348] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6e22b2f0-2402-4fb2-bcfc-f71f2446a5c7 rw loglevel=3 quiet
[ 17.348]
[ 17.348] Current version of pixman: 0.40.0
[ 17.349] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.349] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.349] (==) Log file: "/home/andry/.local/share/xorg/Xorg.0.log", Time: Fri Jul 15 09:43:51 2022
[ 17.349] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.349] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17.349] (==) No Layout section. Using the first Screen section.
[ 17.349] (==) No screen section available. Using defaults.
[ 17.349] (**) |-->Screen "Default Screen Section" (0)
[ 17.349] (**) | |-->Monitor "<default monitor>"
[ 17.350] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.350] (==) Automatically adding devices
[ 17.350] (==) Automatically enabling devices
[ 17.350] (==) Automatically adding GPU devices
[ 17.350] (==) Automatically binding GPU devices
[ 17.350] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 17.350] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 17.350] Entry deleted from font path.
[ 17.350] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 17.350] Entry deleted from font path.
[ 17.350] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 17.350] Entry deleted from font path.
[ 17.350] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF
[ 17.350] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.350] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.350] (II) Module ABI versions:
[ 17.350] X.Org ANSI C Emulation: 0.4
[ 17.350] X.Org Video Driver: 25.2
[ 17.350] X.Org XInput driver : 24.4
[ 17.350] X.Org Server Extension : 10.0
[ 17.350] (++) using VT number 1
[ 17.352] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[ 17.352] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 17.353] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[ 17.353] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[ 17.353] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17.353] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 17.354] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 14 paused 0
[ 17.356] (--) PCI:*(0@0:2:0) 8086:591b:1025:1318 rev 4, Mem @ 0xde000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 17.356] (--) PCI: (1@0:0:0) 1002:694e:1025:1318 rev 192, Mem @ 0xc0000000/268435456, 0xd0000000/2097152, 0xdf300000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 17.356] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 17.356] (II) LoadModule: "glx"
[ 17.357] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.358] (II) Module glx: vendor="X.Org Foundation"
[ 17.358] compiled for 1.21.1.4, module version = 1.0.0
[ 17.358] ABI class: X.Org Server Extension, version 10.0
[ 17.358] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[ 17.358] loading driver: amdgpu
[ 17.358] (==) Matched intel as autoconfigured driver 0
[ 17.358] (==) Matched amdgpu as autoconfigured driver 1
[ 17.358] (==) Matched ati as autoconfigured driver 2
[ 17.358] (==) Matched modesetting as autoconfigured driver 3
[ 17.358] (==) Matched fbdev as autoconfigured driver 4
[ 17.358] (==) Matched vesa as autoconfigured driver 5
[ 17.358] (==) Assigned the driver to the xf86ConfigLayout
[ 17.358] (II) LoadModule: "intel"
[ 17.358] (WW) Warning, couldn't open module intel
[ 17.358] (EE) Failed to load module "intel" (module does not exist, 0)
[ 17.358] (II) LoadModule: "amdgpu"
[ 17.358] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 17.360] (II) Module amdgpu: vendor="X.Org Foundation"
[ 17.360] compiled for 1.21.1.3, module version = 22.0.0
[ 17.360] Module class: X.Org Video Driver
[ 17.360] ABI class: X.Org Video Driver, version 25.2
[ 17.360] (II) LoadModule: "ati"
[ 17.360] (WW) Warning, couldn't open module ati
[ 17.360] (EE) Failed to load module "ati" (module does not exist, 0)
[ 17.360] (II) LoadModule: "modesetting"
[ 17.360] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 17.360] (II) Module modesetting: vendor="X.Org Foundation"
[ 17.360] compiled for 1.21.1.4, module version = 1.21.1
[ 17.360] Module class: X.Org Video Driver
[ 17.360] ABI class: X.Org Video Driver, version 25.2
[ 17.360] (II) LoadModule: "fbdev"
[ 17.360] (WW) Warning, couldn't open module fbdev
[ 17.360] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 17.360] (II) LoadModule: "vesa"
[ 17.360] (WW) Warning, couldn't open module vesa
[ 17.360] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 17.361] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 17.361] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 17.361] (II) modeset(0): using drv /dev/dri/card0
[ 17.362] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 17.362] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 17.362] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 17.362] (==) modeset(0): RGB weight 888
[ 17.362] (==) modeset(0): Default visual is TrueColor
[ 17.362] (II) Loading sub module "glamoregl"
[ 17.362] (II) LoadModule: "glamoregl"
[ 17.362] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 17.369] (II) Module glamoregl: vendor="X.Org Foundation"
[ 17.369] compiled for 1.21.1.4, module version = 1.0.1
[ 17.369] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.616] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 630 (KBL GT2)
[ 17.616] (II) modeset(0): glamor initialized
[ 17.616] (==) modeset(0): VariableRefresh: disabled
[ 17.616] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 17.619] (II) modeset(0): Output eDP-1 has no monitor section
[ 17.622] (II) modeset(0): EDID for output eDP-1
[ 17.622] (II) modeset(0): Manufacturer: NCP Model: 2f Serial#: 0
[ 17.622] (II) modeset(0): Year: 2018 Week: 20
[ 17.622] (II) modeset(0): EDID Version: 1.4
[ 17.622] (II) modeset(0): Digital Display Input
[ 17.622] (II) modeset(0): 8 bits per channel
[ 17.622] (II) modeset(0): Digital interface is DisplayPort
[ 17.622] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 17.623] (II) modeset(0): Gamma: 2.20
[ 17.623] (II) modeset(0): No DPMS capabilities specified
[ 17.623] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 17.623] (II) modeset(0): First detailed timing is preferred mode
[ 17.623] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 17.623] (II) modeset(0): redX: 0.638 redY: 0.335 greenX: 0.318 greenY: 0.625
[ 17.623] (II) modeset(0): blueX: 0.156 blueY: 0.055 whiteX: 0.313 whiteY: 0.329
[ 17.623] (II) modeset(0): Manufacturer's mask: 0
[ 17.623] (II) modeset(0): Supported detailed timing:
[ 17.623] (II) modeset(0): clock: 138.7 MHz Image Size: 344 x 194 mm
[ 17.623] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 17.623] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 17.623] (II) modeset(0): Monitor name: LM156LF9L02
[ 17.623] (II) modeset(0): EDID (in hex):
[ 17.623] (II) modeset(0): 00ffffffffffff0038702f0000000000
[ 17.623] (II) modeset(0): 141c0104a5221378027805a35551a028
[ 17.623] (II) modeset(0): 0e505400000001010101010101010101
[ 17.623] (II) modeset(0): 010101010101293680a070381f403020
[ 17.623] (II) modeset(0): 350058c2100000180000000000000000
[ 17.623] (II) modeset(0): 00000000000000000000000000100000
[ 17.623] (II) modeset(0): 000000000000000000000000000000fc
[ 17.623] (II) modeset(0): 004c4d3135364c46394c30320a200025
[ 17.623] (II) modeset(0): Printing probed modes for output eDP-1
[ 17.623] (II) modeset(0): Modeline "1920x1080"x60.0 138.65 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 17.623] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 17.623] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 17.623] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 17.623] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 17.623] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 17.623] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 17.623] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 17.623] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 17.623] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 17.623] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 17.623] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 17.623] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 17.623] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 17.623] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 17.623] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 17.623] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 17.623] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 17.623] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 17.623] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 17.623] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 17.623] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 17.623] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 17.623] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 17.623] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 17.623] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 17.623] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 17.623] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 17.623] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 17.623] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 17.623] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 17.623] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 17.623] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 17.623] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 17.623] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 17.623] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 17.623] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 17.623] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 17.623] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 17.623] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 17.623] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 17.623] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 17.623] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 17.623] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 17.623] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 17.623] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 17.623] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 17.623] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 17.623] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 17.623] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 17.623] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 17.624] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 17.624] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 17.624] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 17.624] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 17.624] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 17.624] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 17.624] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 17.624] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 17.624] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 17.624] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 17.624] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 17.624] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 17.624] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 17.624] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 17.624] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 17.624] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 17.624] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 17.624] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 17.624] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 17.624] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 17.624] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 17.624] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 17.624] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 17.624] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 17.624] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 17.624] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 17.624] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 17.624] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 17.624] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 17.624] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 17.624] (II) modeset(0): Output eDP-1 connected
[ 17.624] (II) modeset(0): Using exact sizes for initial modes
[ 17.624] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 17.624] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.624] (==) modeset(0): DPI set to (96, 96)
[ 17.624] (II) Loading sub module "fb"
[ 17.624] (II) LoadModule: "fb"
[ 17.624] (II) Module "fb" already built-in
[ 17.624] (==) AMDGPU(G0): Depth 24, (--) framebuffer bpp 32
[ 17.624] (II) AMDGPU(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 17.624] (==) AMDGPU(G0): Default visual is TrueColor
[ 17.624] (==) AMDGPU(G0): RGB weight 888
[ 17.624] (II) AMDGPU(G0): Using 8 bits per RGB (8 bit DAC)
[ 17.624] (--) AMDGPU(G0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x694e)
[ 17.624] (II) Loading sub module "fb"
[ 17.624] (II) LoadModule: "fb"
[ 17.624] (II) Module "fb" already built-in
[ 17.624] (II) Loading sub module "dri2"
[ 17.624] (II) LoadModule: "dri2"
[ 17.624] (II) Module "dri2" already built-in
[ 17.638] (II) Loading sub module "glamoregl"
[ 17.638] (II) LoadModule: "glamoregl"
[ 17.638] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 17.638] (II) Module glamoregl: vendor="X.Org Foundation"
[ 17.638] compiled for 1.21.1.4, module version = 1.0.1
[ 17.638] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.646] (II) AMDGPU(G0): glamor X acceleration enabled on AMD VEGAM (LLVM 14.0.6, DRM 3.46, 5.18.11-arch1-1)
[ 17.646] (II) AMDGPU(G0): glamor detected, initialising EGL layer.
[ 17.646] (==) AMDGPU(G0): TearFree property default: auto
[ 17.646] (II) AMDGPU(G0): Output DisplayPort-1-0 has no monitor section
[ 17.647] (II) AMDGPU(G0): Output HDMI-A-1-0 has no monitor section
[ 17.658] (II) AMDGPU(G0): EDID for output DisplayPort-1-0
[ 17.659] (II) AMDGPU(G0): EDID for output HDMI-A-1-0
[ 17.659] (II) AMDGPU(G0): Manufacturer: SAM Model: c1a Serial#: 1515865937
[ 17.659] (II) AMDGPU(G0): Year: 2017 Week: 21
[ 17.659] (II) AMDGPU(G0): EDID Version: 1.3
[ 17.659] (II) AMDGPU(G0): Digital Display Input
[ 17.659] (II) AMDGPU(G0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 17.659] (II) AMDGPU(G0): Gamma: 2.20
[ 17.659] (II) AMDGPU(G0): DPMS capabilities: Off
[ 17.659] (II) AMDGPU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 17.659] (II) AMDGPU(G0): First detailed timing is preferred mode
[ 17.659] (II) AMDGPU(G0): redX: 0.646 redY: 0.337 greenX: 0.329 greenY: 0.616
[ 17.659] (II) AMDGPU(G0): blueX: 0.146 blueY: 0.056 whiteX: 0.312 whiteY: 0.329
[ 17.659] (II) AMDGPU(G0): Supported established timings:
[ 17.659] (II) AMDGPU(G0): 720x400@70Hz
[ 17.659] (II) AMDGPU(G0): 640x480@60Hz
[ 17.659] (II) AMDGPU(G0): 640x480@67Hz
[ 17.659] (II) AMDGPU(G0): 640x480@72Hz
[ 17.659] (II) AMDGPU(G0): 640x480@75Hz
[ 17.659] (II) AMDGPU(G0): 800x600@56Hz
[ 17.659] (II) AMDGPU(G0): 800x600@60Hz
[ 17.659] (II) AMDGPU(G0): 800x600@72Hz
[ 17.659] (II) AMDGPU(G0): 800x600@75Hz
[ 17.659] (II) AMDGPU(G0): 832x624@75Hz
[ 17.659] (II) AMDGPU(G0): 1024x768@60Hz
[ 17.659] (II) AMDGPU(G0): 1024x768@70Hz
[ 17.659] (II) AMDGPU(G0): 1024x768@75Hz
[ 17.659] (II) AMDGPU(G0): 1280x1024@75Hz
[ 17.659] (II) AMDGPU(G0): 1152x864@75Hz
[ 17.659] (II) AMDGPU(G0): Manufacturer's mask: 0
[ 17.659] (II) AMDGPU(G0): Supported standard timings:
[ 17.659] (II) AMDGPU(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 17.659] (II) AMDGPU(G0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 17.659] (II) AMDGPU(G0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 17.659] (II) AMDGPU(G0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 17.659] (II) AMDGPU(G0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 17.659] (II) AMDGPU(G0): #5: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 17.659] (II) AMDGPU(G0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 17.659] (II) AMDGPU(G0): Supported detailed timing:
[ 17.659] (II) AMDGPU(G0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 17.659] (II) AMDGPU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 17.659] (II) AMDGPU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 17.659] (II) AMDGPU(G0): Supported detailed timing:
[ 17.659] (II) AMDGPU(G0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 17.659] (II) AMDGPU(G0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 17.659] (II) AMDGPU(G0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 17.659] (II) AMDGPU(G0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 17.659] (II) AMDGPU(G0): Monitor name: S24E390
[ 17.659] (II) AMDGPU(G0): Supported detailed timing:
[ 17.659] (II) AMDGPU(G0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 17.659] (II) AMDGPU(G0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 17.659] (II) AMDGPU(G0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 17.659] (II) AMDGPU(G0): Supported detailed timing:
[ 17.659] (II) AMDGPU(G0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 17.659] (II) AMDGPU(G0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 17.659] (II) AMDGPU(G0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 17.659] (II) AMDGPU(G0): Supported detailed timing:
[ 17.660] (II) AMDGPU(G0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 17.660] (II) AMDGPU(G0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 17.660] (II) AMDGPU(G0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 17.660] (II) AMDGPU(G0): Number of EDID sections to follow: 1
[ 17.660] (II) AMDGPU(G0): EDID (in hex):
[ 17.660] (II) AMDGPU(G0): 00ffffffffffff004c2d1a0c51475a5a
[ 17.660] (II) AMDGPU(G0): 151b010380341d782a9791a556549d25
[ 17.660] (II) AMDGPU(G0): 0e5054bfef80714f81c0810081809500
[ 17.660] (II) AMDGPU(G0): a9c0b3000101023a801871382d40582c
[ 17.660] (II) AMDGPU(G0): 450009252100001e011d007251d01e20
[ 17.660] (II) AMDGPU(G0): 6e28550009252100001e000000fd0032
[ 17.660] (II) AMDGPU(G0): 4b1e5111000a202020202020000000fc
[ 17.660] (II) AMDGPU(G0): 00533234453339300a202020202001b9
[ 17.660] (II) AMDGPU(G0): 02031af14690041f1312032309070783
[ 17.660] (II) AMDGPU(G0): 01000066030c00100080011d00bc52d0
[ 17.660] (II) AMDGPU(G0): 1e20b828554009252100001e8c0ad090
[ 17.660] (II) AMDGPU(G0): 204031200c4055000925210000188c0a
[ 17.660] (II) AMDGPU(G0): d08a20e02d10103e9600092521000018
[ 17.660] (II) AMDGPU(G0): 00000000000000000000000000000000
[ 17.660] (II) AMDGPU(G0): 00000000000000000000000000000000
[ 17.660] (II) AMDGPU(G0): 000000000000000000000000000000c9
[ 17.660] (II) AMDGPU(G0): Printing probed modes for output HDMI-A-1-0
[ 17.660] (II) AMDGPU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 17.660] (II) AMDGPU(G0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17.660] (II) AMDGPU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 17.660] (II) AMDGPU(G0): mem size init: gart size :ff750000 vram size: s:feae7000 visible:f2e7000
[ 17.660] (==) AMDGPU(G0): DPI set to (96, 96)
[ 17.660] (==) AMDGPU(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.660] (II) Loading sub module "ramdac"
[ 17.660] (II) LoadModule: "ramdac"
[ 17.660] (II) Module "ramdac" already built-in
[ 17.683] (==) modeset(0): Backing store enabled
[ 17.683] (==) modeset(0): Silken mouse enabled
[ 17.764] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 17.764] (==) modeset(0): DPMS enabled
[ 17.764] (II) modeset(0): [DRI2] Setup complete
[ 17.764] (II) modeset(0): [DRI2] DRI driver: iris
[ 17.764] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 17.764] (II) AMDGPU(G0): [DRI2] Setup complete
[ 17.764] (II) AMDGPU(G0): [DRI2] DRI driver: radeonsi
[ 17.764] (II) AMDGPU(G0): [DRI2] VDPAU driver: radeonsi
[ 17.765] (II) AMDGPU(G0): Front buffer pitch: 4096 bytes
[ 17.765] (==) AMDGPU(G0): Backing store enabled
[ 17.765] (II) AMDGPU(G0): Direct rendering enabled
[ 17.772] (II) AMDGPU(G0): Use GLAMOR acceleration.
[ 17.772] (II) AMDGPU(G0): Acceleration enabled
[ 17.772] (==) AMDGPU(G0): DPMS enabled
[ 17.772] (==) AMDGPU(G0): Silken mouse enabled
[ 17.793] (II) Initializing extension Generic Event Extension
[ 17.793] (II) Initializing extension SHAPE
[ 17.793] (II) Initializing extension MIT-SHM
[ 17.794] (II) Initializing extension XInputExtension
[ 17.794] (II) Initializing extension XTEST
[ 17.794] (II) Initializing extension BIG-REQUESTS
[ 17.794] (II) Initializing extension SYNC
[ 17.794] (II) Initializing extension XKEYBOARD
[ 17.795] (II) Initializing extension XC-MISC
[ 17.795] (II) Initializing extension SECURITY
[ 17.795] (II) Initializing extension XFIXES
[ 17.795] (II) Initializing extension RENDER
[ 17.795] (II) Initializing extension RANDR
[ 17.795] (II) Initializing extension COMPOSITE
[ 17.796] (II) Initializing extension DAMAGE
[ 17.796] (II) Initializing extension MIT-SCREEN-SAVER
[ 17.796] (II) Initializing extension DOUBLE-BUFFER
[ 17.796] (II) Initializing extension RECORD
[ 17.796] (II) Initializing extension DPMS
[ 17.796] (II) Initializing extension Present
[ 17.797] (II) Initializing extension DRI3
[ 17.797] (II) Initializing extension X-Resource
[ 17.797] (II) Initializing extension XVideo
[ 17.797] (II) Initializing extension XVideo-MotionCompensation
[ 17.797] (II) Initializing extension GLX
[ 17.808] (II) AIGLX: Loaded and initialized iris
[ 17.808] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 17.808] (II) Initializing extension XFree86-VidModeExtension
[ 17.808] (II) Initializing extension XFree86-DGA
[ 17.808] (II) Initializing extension XFree86-DRI
[ 17.808] (II) Initializing extension DRI2
[ 17.842] (II) modeset(0): Damage tracking initialized
[ 17.842] (II) modeset(0): Setting screen physical size to 508 x 285
[ 17.886] (II) config/udev: Adding input device Acer Wireless Radio Control (/dev/input/event4)
[ 17.886] (**) Acer Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 17.886] (**) Acer Wireless Radio Control: Applying InputClass "system-keyboard"
[ 17.886] (II) LoadModule: "libinput"
[ 17.887] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 17.889] (II) Module libinput: vendor="X.Org Foundation"
[ 17.889] compiled for 1.21.1.3, module version = 1.2.1
[ 17.889] Module class: X.Org XInput Driver
[ 17.889] ABI class: X.Org XInput driver, version 24.4
[ 17.889] (II) Using input driver 'libinput' for 'Acer Wireless Radio Control'
[ 17.889] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 36 paused 0
[ 17.889] (**) Acer Wireless Radio Control: always reports core events
[ 17.889] (**) Option "Device" "/dev/input/event4"
[ 17.896] (II) event4 - Acer Wireless Radio Control: is tagged by udev as: Keyboard
[ 17.896] (II) event4 - Acer Wireless Radio Control: device is a keyboard
[ 17.896] (II) event4 - Acer Wireless Radio Control: device removed
[ 17.896] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/10251229:00/input/input4/event4"
[ 17.896] (II) XINPUT: Adding extended input device "Acer Wireless Radio Control" (type: KEYBOARD, id 6)
[ 17.896] (**) Option "xkb_model" "acer_laptop"
[ 17.896] (**) Option "xkb_layout" "hu"
[ 17.896] (**) Option "xkb_variant" "102_qwerty_dot_dead"
[ 17.909] (II) event4 - Acer Wireless Radio Control: is tagged by udev as: Keyboard
[ 17.909] (II) event4 - Acer Wireless Radio Control: device is a keyboard
[ 17.909] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 17.909] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 17.910] (**) Video Bus: Applying InputClass "system-keyboard"
[ 17.910] (II) Using input driver 'libinput' for 'Video Bus'
[ 17.910] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 39 paused 0
[ 17.910] (**) Video Bus: always reports core events
[ 17.910] (**) Option "Device" "/dev/input/event5"
[ 17.911] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 17.911] (II) event5 - Video Bus: device is a keyboard
[ 17.911] (II) event5 - Video Bus: device removed
[ 17.911] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[ 17.911] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 17.911] (**) Option "xkb_model" "acer_laptop"
[ 17.911] (**) Option "xkb_layout" "hu"
[ 17.911] (**) Option "xkb_variant" "102_qwerty_dot_dead"
[ 17.911] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 17.911] (II) event5 - Video Bus: device is a keyboard
[ 17.912] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 17.912] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 17.912] (**) Power Button: Applying InputClass "system-keyboard"
[ 17.912] (II) Using input driver 'libinput' for 'Power Button'
[ 17.912] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 40 paused 0
[ 17.912] (**) Power Button: always reports core events
[ 17.912] (**) Option "Device" "/dev/input/event1"
[ 17.913] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 17.913] (II) event1 - Power Button: device is a keyboard
[ 17.913] (II) event1 - Power Button: device removed
[ 17.913] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 17.913] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 17.913] (**) Option "xkb_model" "acer_laptop"
[ 17.913] (**) Option "xkb_layout" "hu"
[ 17.913] (**) Option "xkb_variant" "102_qwerty_dot_dead"
[ 17.913] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 17.913] (II) event1 - Power Button: device is a keyboard
[ 17.914] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 17.914] (II) No input driver specified, ignoring this device.
[ 17.914] (II) This device may have been added with another device file.
[ 17.914] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 17.914] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 17.914] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 17.914] (II) Using input driver 'libinput' for 'Sleep Button'
[ 17.915] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 41 paused 0
[ 17.915] (**) Sleep Button: always reports core events
[ 17.915] (**) Option "Device" "/dev/input/event0"
[ 17.915] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 17.915] (II) event0 - Sleep Button: device is a keyboard
[ 17.915] (II) event0 - Sleep Button: device removed
[ 17.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 17.915] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 17.915] (**) Option "xkb_model" "acer_laptop"
[ 17.915] (**) Option "xkb_layout" "hu"
[ 17.915] (**) Option "xkb_variant" "102_qwerty_dot_dead"
[ 17.916] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 17.916] (II) event0 - Sleep Button: device is a keyboard
[ 17.916] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event13)
[ 17.916] (II) No input driver specified, ignoring this device.
[ 17.916] (II) This device may have been added with another device file.
[ 17.917] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
[ 17.917] (II) No input driver specified, ignoring this device.
[ 17.917] (II) This device may have been added with another device file.
[ 17.917] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=12 (/dev/input/event15)
[ 17.917] (II) No input driver specified, ignoring this device.
[ 17.917] (II) This device may have been added with another device file.
[ 17.917] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[ 17.917] (II) No input driver specified, ignoring this device.
[ 17.917] (II) This device may have been added with another device file.
[ 17.917] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[ 17.917] (II) No input driver specified, ignoring this device.
[ 17.917] (II) This device may have been added with another device file.
[ 17.917] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event11)
[ 17.918] (II) No input driver specified, ignoring this device.
[ 17.918] (II) This device may have been added with another device file.
[ 17.918] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event12)
[ 17.918] (II) No input driver specified, ignoring this device.
[ 17.918] (II) This device may have been added with another device file.
[ 17.918] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event23)
[ 17.918] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 17.918] (II) Using input driver 'libinput' for 'USB Optical Mouse'
[ 17.975] (II) systemd-logind: got fd for /dev/input/event23 13:87 fd 42 paused 0
[ 17.975] (**) USB Optical Mouse: always reports core events
[ 17.975] (**) Option "Device" "/dev/input/event23"
[ 17.977] (II) event23 - USB Optical Mouse: is tagged by udev as: Mouse
[ 17.977] (II) event23 - USB Optical Mouse: device set to 1000 DPI
[ 17.977] (II) event23 - USB Optical Mouse: device is a pointer
[ 17.978] (II) event23 - USB Optical Mouse: device removed
[ 17.978] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:192F:0916.0002/input/input27/event23"
[ 17.978] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 17.978] (**) Option "AccelerationScheme" "none"
[ 17.978] (**) USB Optical Mouse: (accel) selected scheme none/0
[ 17.978] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 17.978] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 17.980] (II) event23 - USB Optical Mouse: is tagged by udev as: Mouse
[ 17.980] (II) event23 - USB Optical Mouse: device set to 1000 DPI
[ 17.980] (II) event23 - USB Optical Mouse: device is a pointer
[ 17.981] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse2)
[ 17.981] (II) No input driver specified, ignoring this device.
[ 17.981] (II) This device may have been added with another device file.
[ 17.982] (II) config/udev: Adding input device HD WebCam: HD WebCam (/dev/input/event24)
[ 17.982] (**) HD WebCam: HD WebCam: Applying InputClass "libinput keyboard catchall"
[ 17.982] (**) HD WebCam: HD WebCam: Applying InputClass "system-keyboard"
[ 17.982] (II) Using input driver 'libinput' for 'HD WebCam: HD WebCam'
[ 17.983] (II) systemd-logind: got fd for /dev/input/event24 13:88 fd 43 paused 0
[ 17.983] (**) HD WebCam: HD WebCam: always reports core events
[ 17.983] (**) Option "Device" "/dev/input/event24"
[ 17.985] (II) event24 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[ 17.985] (II) event24 - HD WebCam: HD WebCam: device is a keyboard
[ 17.985] (II) event24 - HD WebCam: HD WebCam: device removed
[ 17.985] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input28/event24"
[ 17.985] (II) XINPUT: Adding extended input device "HD WebCam: HD WebCam" (type: KEYBOARD, id 11)
[ 17.985] (**) Option "xkb_model" "acer_laptop"
[ 17.985] (**) Option "xkb_layout" "hu"
[ 17.985] (**) Option "xkb_variant" "102_qwerty_dot_dead"
[ 17.987] (II) event24 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[ 17.987] (II) event24 - HD WebCam: HD WebCam: device is a keyboard
[ 17.988] (II) config/udev: Adding input device SYNA7DB5:00 06CB:CD41 Mouse (/dev/input/event6)
[ 17.988] (**) SYNA7DB5:00 06CB:CD41 Mouse: Applying InputClass "libinput pointer catchall"
[ 17.988] (II) Using input driver 'libinput' for 'SYNA7DB5:00 06CB:CD41 Mouse'
[ 17.989] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 44 paused 0
[ 17.989] (**) SYNA7DB5:00 06CB:CD41 Mouse: always reports core events
[ 17.989] (**) Option "Device" "/dev/input/event6"
[ 17.991] (II) event6 - SYNA7DB5:00 06CB:CD41 Mouse: is tagged by udev as: Mouse Pointingstick
[ 17.991] (II) event6 - SYNA7DB5:00 06CB:CD41 Mouse: device is a pointer
[ 17.992] (II) event6 - SYNA7DB5:00 06CB:CD41 Mouse: device removed
[ 17.993] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-SYNA7DB5:00/0018:06CB:CD41.0001/input/input24/event6"
[ 17.993] (II) XINPUT: Adding extended input device "SYNA7DB5:00 06CB:CD41 Mouse" (type: MOUSE, id 12)
[ 17.993] (**) Option "AccelerationScheme" "none"
[ 17.993] (**) SYNA7DB5:00 06CB:CD41 Mouse: (accel) selected scheme none/0
[ 17.993] (**) SYNA7DB5:00 06CB:CD41 Mouse: (accel) acceleration factor: 2.000
[ 17.993] (**) SYNA7DB5:00 06CB:CD41 Mouse: (accel) acceleration threshold: 4
[ 17.994] (II) event6 - SYNA7DB5:00 06CB:CD41 Mouse: is tagged by udev as: Mouse Pointingstick
[ 17.995] (II) event6 - SYNA7DB5:00 06CB:CD41 Mouse: device is a pointer
[ 17.997] (II) config/udev: Adding input device SYNA7DB5:00 06CB:CD41 Mouse (/dev/input/mouse0)
[ 17.997] (II) No input driver specified, ignoring this device.
[ 17.997] (II) This device may have been added with another device file.
[ 17.998] (II) config/udev: Adding input device SYNA7DB5:00 06CB:CD41 Touchpad (/dev/input/event7)
[ 17.998] (**) SYNA7DB5:00 06CB:CD41 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 17.998] (**) SYNA7DB5:00 06CB:CD41 Touchpad: Applying InputClass "touchpad"
[ 17.998] (II) Using input driver 'libinput' for 'SYNA7DB5:00 06CB:CD41 Touchpad'
[ 17.999] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 45 paused 0
[ 17.999] (**) SYNA7DB5:00 06CB:CD41 Touchpad: always reports core events
[ 17.999] (**) Option "Device" "/dev/input/event7"
[ 18.000] (II) event7 - SYNA7DB5:00 06CB:CD41 Touchpad: is tagged by udev as: Touchpad
[ 18.003] (II) event7 - SYNA7DB5:00 06CB:CD41 Touchpad: device is a touchpad
[ 18.003] (II) event7 - SYNA7DB5:00 06CB:CD41 Touchpad: device removed
[ 18.003] (**) Option "Tapping" "on"
[ 18.003] (**) Option "TappingButtonMap" "lrm"
[ 18.003] (**) Option "NaturalScrolling" "true"
[ 18.004] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-SYNA7DB5:00/0018:06CB:CD41.0001/input/input25/event7"
[ 18.004] (II) XINPUT: Adding extended input device "SYNA7DB5:00 06CB:CD41 Touchpad" (type: TOUCHPAD, id 13)
[ 18.006] (**) Option "AccelerationScheme" "none"
[ 18.006] (**) SYNA7DB5:00 06CB:CD41 Touchpad: (accel) selected scheme none/0
[ 18.006] (**) SYNA7DB5:00 06CB:CD41 Touchpad: (accel) acceleration factor: 2.000
[ 18.006] (**) SYNA7DB5:00 06CB:CD41 Touchpad: (accel) acceleration threshold: 4
[ 18.007] (II) event7 - SYNA7DB5:00 06CB:CD41 Touchpad: is tagged by udev as: Touchpad
[ 18.010] (II) event7 - SYNA7DB5:00 06CB:CD41 Touchpad: device is a touchpad
[ 18.011] (II) config/udev: Adding input device SYNA7DB5:00 06CB:CD41 Touchpad (/dev/input/mouse1)
[ 18.011] (**) SYNA7DB5:00 06CB:CD41 Touchpad: Applying InputClass "touchpad"
[ 18.011] (II) Using input driver 'libinput' for 'SYNA7DB5:00 06CB:CD41 Touchpad'
[ 18.011] (**) SYNA7DB5:00 06CB:CD41 Touchpad: always reports core events
[ 18.011] (**) Option "Device" "/dev/input/mouse1"
[ 18.012] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse1
Permission denied.
[ 18.012] (II) mouse1: opening input device '/dev/input/mouse1' failed (Permission denied).
[ 18.012] (II) mouse1 - failed to create input device '/dev/input/mouse1'.
[ 18.012] (EE) libinput: SYNA7DB5:00 06CB:CD41 Touchpad: Failed to create a device for /dev/input/mouse1
[ 18.012] (EE) PreInit returned 2 for "SYNA7DB5:00 06CB:CD41 Touchpad"
[ 18.012] (II) UnloadModule: "libinput"
[ 18.012] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[ 18.012] (II) No input driver specified, ignoring this device.
[ 18.012] (II) This device may have been added with another device file.
[ 18.013] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[ 18.013] (II) No input driver specified, ignoring this device.
[ 18.013] (II) This device may have been added with another device file.
[ 18.013] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event18)
[ 18.013] (II) No input driver specified, ignoring this device.
[ 18.013] (II) This device may have been added with another device file.
[ 18.014] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event19)
[ 18.014] (II) No input driver specified, ignoring this device.
[ 18.014] (II) This device may have been added with another device file.
[ 18.014] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event20)
[ 18.014] (II) No input driver specified, ignoring this device.
[ 18.014] (II) This device may have been added with another device file.
[ 18.015] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event21)
[ 18.015] (II) No input driver specified, ignoring this device.
[ 18.015] (II) This device may have been added with another device file.
[ 18.015] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 18.015] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 18.015] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 18.015] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 18.016] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 46 paused 0
[ 18.016] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.016] (**) Option "Device" "/dev/input/event3"
[ 18.017] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 18.017] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 18.018] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 18.018] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 18.018] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 18.018] (**) Option "xkb_model" "acer_laptop"
[ 18.018] (**) Option "xkb_layout" "hu"
[ 18.018] (**) Option "xkb_variant" "102_qwerty_dot_dead"
[ 18.019] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 18.019] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 18.020] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 18.021] (II) No input driver specified, ignoring this device.
[ 18.021] (II) This device may have been added with another device file.
[ 18.023] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event22)
[ 18.023] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 18.023] (**) Acer WMI hotkeys: Applying InputClass "system-keyboard"
[ 18.023] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[ 18.023] (II) systemd-logind: got fd for /dev/input/event22 13:86 fd 47 paused 0
[ 18.023] (**) Acer WMI hotkeys: always reports core events
[ 18.023] (**) Option "Device" "/dev/input/event22"
[ 18.024] (II) event22 - Acer WMI hotkeys: is tagged by udev as: Keyboard
[ 18.024] (II) event22 - Acer WMI hotkeys: device is a keyboard
[ 18.024] (II) event22 - Acer WMI hotkeys: device removed
[ 18.024] (**) Option "config_info" "udev:/sys/devices/virtual/input/input23/event22"
[ 18.024] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 15)
[ 18.024] (**) Option "xkb_model" "acer_laptop"
[ 18.024] (**) Option "xkb_layout" "hu"
[ 18.024] (**) Option "xkb_variant" "102_qwerty_dot_dead"
[ 18.025] (II) event22 - Acer WMI hotkeys: is tagged by udev as: Keyboard
[ 18.025] (II) event22 - Acer WMI hotkeys: device is a keyboard
[ 18.480] (II) modeset(0): EDID vendor "NCP", prod id 47
[ 18.480] (II) modeset(0): Printing DDC gathered Modelines:
[ 18.480] (II) modeset(0): Modeline "1920x1080"x0.0 138.65 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 18.497] (II) modeset(0): EDID vendor "NCP", prod id 47
[ 18.497] (II) modeset(0): Printing DDC gathered Modelines:
[ 18.497] (II) modeset(0): Modeline "1920x1080"x0.0 138.65 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 18.547] (II) modeset(0): EDID vendor "NCP", prod id 47
[ 18.547] (II) modeset(0): Printing DDC gathered Modelines:
[ 18.547] (II) modeset(0): Modeline "1920x1080"x0.0 138.65 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 18.753] (II) modeset(0): Allocate new frame buffer 3840x1080 stride
[ 18.832] randr: falling back to unsynchronized pixmap sharing~/.xinitrc
#!/bin/sh
userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap
# merge in defaults and keymaps
if [ -f $sysresources ]; then
xrdb -merge $sysresources
fi
if [ -f $sysmodmap ]; then
xmodmap $sysmodmap
fi
if [ -f "$userresources" ]; then
xrdb -merge "$userresources"
fi
if [ -f "$usermodmap" ]; then
xmodmap "$usermodmap"
fi
# start some nice programs
if [ -d /etc/X11/xinit/xinitrc.d ] ; then
for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# Start window manager
# feh --bg-scale /home/andry/Pictures/carina_wallpaper.jpg
exec /usr/bin/i3~/.zprofile
export PATH=$PATH:$HOME/.platformio/penv/bin
if [ -z "${DISPLAY}" ] && [ "${XDG_VTNR}" -eq 1 ]; then
exec startx
fi
export CLICOLOR=1~/.config/i3/config
# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
#
# Should you change your keyboard layout some time, delete
# this file and re-run i3-config-wizard(1).
#
# i3 config file (v4)
#
# Please see https://i3wm.org/docs/userguide.html for a complete reference!
set $mod Mod4
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:monospace 8
# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
font pango:DejaVu Sans Mono 10
# Start XDG autostart .desktop files using dex. See also
# https://wiki.archlinux.org/index.php/XDG_Autostart
exec --no-startup-id dex --autostart --environment i3
# The combination of xss-lock, nm-applet and pactl is a popular choice, so
# they are included here as an example. Modify as you see fit.
# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
# screen before suspend. Use loginctl lock-session to lock your screen.
exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
# NetworkManager is the most popular way to manage wireless networks on Linux,
# and nm-applet is a desktop environment-independent system tray GUI for it.
exec --no-startup-id nm-applet
exec --no-startup-id blueberry-tray
exec --no-startup-id pasystray
# Use pactl to adjust volume in PulseAudio.
set $refresh_i3status killall -SIGUSR1 i3status
bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status
bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status
bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
# Use playerctl to make use of media keys
bindsym XF86AudioPlay exec playerctl play-pause
bindsym XF86AudioPause exec playerctl play-pause
bindsym XF86AudioStop exec playerctl stop
bindsym XF86AudioNext exec playerctl next
bindsym XF86AudioPrev exec playerctl previous
# Use xbacklight to set brightness
bindsym XF86MonBrightnessUp exec --no-startup-id xbacklight -inc 5 -fps 60
bindsym XF86MonBrightnessDown exec --no-startup-id xbacklight -dec 5 -fps 60
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# start a terminal
bindsym $mod+Return exec alacritty
# kill focused window
bindsym $mod+Shift+q kill
# start dmenu (a program launcher)
#bindsym $mod+d exec --no-startup-id dmenu_run
# A more modern dmenu replacement is rofi:
bindcode $mod+40 exec "rofi -modi drun,run -show drun -show-icons"
bindsym $mod+p exec "rofi -show p -modi p:$HOME/build/rofi-power-menu/rofi-power-menu"
# There also is i3-dmenu-desktop which only displays applications shipping a
# .desktop file. It is a wrapper around dmenu, so you need that installed.
# bindcode $mod+40 exec --no-startup-id i3-dmenu-desktop
# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+eacute focus right
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+eacute move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+h split h
# split in vertical orientation
bindsym $mod+v split v
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# focus the child container
#bindsym $mod+d focus child
# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1"
set $ws2 "2"
set $ws3 "3"
set $ws4 "4"
set $ws5 "5"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"
# switch to workspace
bindsym $mod+1 workspace number $ws1
bindsym $mod+2 workspace number $ws2
bindsym $mod+3 workspace number $ws3
bindsym $mod+4 workspace number $ws4
bindsym $mod+5 workspace number $ws5
bindsym $mod+6 workspace number $ws6
bindsym $mod+7 workspace number $ws7
bindsym $mod+8 workspace number $ws8
bindsym $mod+9 workspace number $ws9
bindsym $mod+0 workspace number $ws10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace number $ws1
bindsym $mod+Shift+2 move container to workspace number $ws2
bindsym $mod+Shift+3 move container to workspace number $ws3
bindsym $mod+Shift+4 move container to workspace number $ws4
bindsym $mod+Shift+5 move container to workspace number $ws5
bindsym $mod+Shift+6 move container to workspace number $ws6
bindsym $mod+Shift+7 move container to workspace number $ws7
bindsym $mod+Shift+8 move container to workspace number $ws8
bindsym $mod+Shift+9 move container to workspace number $ws9
bindsym $mod+Shift+0 move container to workspace number $ws10
# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym j resize shrink width 10 px or 10 ppt
bindsym k resize grow height 10 px or 10 ppt
bindsym l resize shrink height 10 px or 10 ppt
bindsym eacute resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 10 px or 10 ppt
bindsym Down resize grow height 10 px or 10 ppt
bindsym Up resize shrink height 10 px or 10 ppt
bindsym Right resize grow width 10 px or 10 ppt
# back to normal: Enter or Escape or $mod+r
bindsym Return mode "default"
bindsym Escape mode "default"
bindsym $mod+r mode "default"
}
bindsym $mod+r mode "resize"
bindsym Mod1+Shift+2 exec "maim -s -u | xclip -selection clipboard -t image/png -i"
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
colors {
# Whole color settings
background #3c3836
statusline #ebdbb2
separator #666666
focused_workspace #458588 #458588 #ebdbb2
active_workspace #83a598 #83a598 #ebdbb2
inactive_workspace #504945 #504945 #ebdbb2
urgent_workspace #cc241d #cc241d #504945
}
status_command i3status
}
# Move apps to workspaces
for_window [class="Spotify"] move --no-auto-back-and-forth container to workspace $WS10
# Make all matplotlib windows float
for_window [class="Matplotlib"] floating enable
# Gaps config
for_window [class=".*"] border pixel 0
gaps inner 10
smart_gaps on
smart_borders on
# PiCom
exec_always --no-startup-id picom --experimental-backends
exec --no-startup-id autorandr --change
# Lock at start
exec --no-startup-id ~/.config/lock.sh
# Start playerctl daemon
exec --no-startup-id playerctld daemon
exec --no-startup-id udiskie --tray &
# Set background
exec --no-startup-id nitrogen --restore~/.config/lock.sh
#!/bin/sh
killall -q 'i3lock'
while pgrep -x i3lock > /dev/null; do sleep 1; done
IMAGE=~/Pictures/carina_lockpaperx2.png
BLANK='00000000'
WHITE='FFFFFFFF'
BLACK='000000FF'
DARKGREY="1F1F1FFF"
DARKRED="8F0000FF"
i3lock -n \
--insidever-color=$BLANK \
--inside-color=$BLANK \
--ring-color=$WHITE \
--line-color=$BLANK \
--keyhl-color=$DARKGREY \
--bshl-color=$DARKRED \
--image="$IMAGE" \
--time-color=$WHITE \
--timeoutline-color="$BLACK" \
--date-color=$WHITE \
--date-size='16' \
--dateoutline-color="$BLACK" \
--dateoutline-width="0.2" \
--radiu="30" \
--ind-pos="0.8*w:0.9*h" \
--time-pos="ix-0.09*w:iy" \
--clock \
--wrong-text="" \
--verif-text=""; nitrogen --restoreOffline
#2 2022-07-15 09:52:09
- Slithery
- Administrator
- From: Norfolk, UK
- Registered: 2013-12-01
- Posts: 5,776
Offline
#3 2022-07-15 22:34:49
- andriii25
- Member
- Registered: 2017-06-23
- Posts: 5
Re: Startx failing at first then automatically tries again and succeeds
So that changed the initial error message, but besides that the behavior is the same.
In the meanwhile I managed to find the actual log with the crash
~/.local/share/xorg/Xorg.0.log.old
[ 4.885]
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[ 4.885] Current Operating System: Linux izanami 5.18.11-arch1-1 #1 SMP PREEMPT_DYNAMIC Tue, 12 Jul 2022 15:40:51 +0000 x86_64
[ 4.885] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6e22b2f0-2402-4fb2-bcfc-f71f2446a5c7 rw loglevel=3 quiet
[ 4.885]
[ 4.885] Current version of pixman: 0.40.0
[ 4.885] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.885] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.886] (==) Log file: "/home/andry/.local/share/xorg/Xorg.0.log", Time: Fri Jul 15 23:31:45 2022
[ 4.887] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.887] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.888] (==) No Layout section. Using the first Screen section.
[ 4.888] (==) No screen section available. Using defaults.
[ 4.888] (**) |-->Screen "Default Screen Section" (0)
[ 4.888] (**) | |-->Monitor "<default monitor>"
[ 4.888] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.888] (==) Automatically adding devices
[ 4.888] (==) Automatically enabling devices
[ 4.888] (==) Automatically adding GPU devices
[ 4.888] (==) Automatically binding GPU devices
[ 4.888] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.890] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 4.890] Entry deleted from font path.
[ 4.890] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 4.890] Entry deleted from font path.
[ 4.890] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 4.890] Entry deleted from font path.
[ 4.890] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF
[ 4.890] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.890] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.890] (II) Module ABI versions:
[ 4.890] X.Org ANSI C Emulation: 0.4
[ 4.890] X.Org Video Driver: 25.2
[ 4.890] X.Org XInput driver : 24.4
[ 4.890] X.Org Server Extension : 10.0
[ 4.890] (++) using VT number 1
[ 4.892] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 4.893] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.893] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 4.893] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 4.894] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4.894] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 4.894] (EE) systemd-logind: failed to take device /dev/dri/card1: No such device
[ 4.897] (--) PCI:*(0@0:2:0) 8086:591b:1025:1318 rev 4, Mem @ 0xde000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 4.897] (--) PCI: (1@0:0:0) 1002:694e:1025:1318 rev 192, Mem @ 0xc0000000/268435456, 0xd0000000/2097152, 0xdf300000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 4.897] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4.897] (II) LoadModule: "glx"
[ 4.898] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.905] (II) Module glx: vendor="X.Org Foundation"
[ 4.905] compiled for 1.21.1.4, module version = 1.0.0
[ 4.905] ABI class: X.Org Server Extension, version 10.0
[ 4.905] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 4.905] loading driver: amdgpu
[ 4.905] (==) Matched amdgpu as autoconfigured driver 0
[ 4.905] (==) Matched ati as autoconfigured driver 1
[ 4.905] (==) Matched intel as autoconfigured driver 2
[ 4.905] (==) Matched modesetting as autoconfigured driver 3
[ 4.905] (==) Matched fbdev as autoconfigured driver 4
[ 4.905] (==) Matched vesa as autoconfigured driver 5
[ 4.905] (==) Assigned the driver to the xf86ConfigLayout
[ 4.905] (II) LoadModule: "amdgpu"
[ 4.905] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 4.907] (II) Module amdgpu: vendor="X.Org Foundation"
[ 4.907] compiled for 1.21.1.3, module version = 22.0.0
[ 4.907] Module class: X.Org Video Driver
[ 4.907] ABI class: X.Org Video Driver, version 25.2
[ 4.907] (II) LoadModule: "ati"
[ 4.907] (WW) Warning, couldn't open module ati
[ 4.907] (EE) Failed to load module "ati" (module does not exist, 0)
[ 4.907] (II) LoadModule: "intel"
[ 4.907] (WW) Warning, couldn't open module intel
[ 4.907] (EE) Failed to load module "intel" (module does not exist, 0)
[ 4.908] (II) LoadModule: "modesetting"
[ 4.908] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.909] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.909] compiled for 1.21.1.4, module version = 1.21.1
[ 4.909] Module class: X.Org Video Driver
[ 4.909] ABI class: X.Org Video Driver, version 25.2
[ 4.909] (II) LoadModule: "fbdev"
[ 4.909] (WW) Warning, couldn't open module fbdev
[ 4.909] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4.909] (II) LoadModule: "vesa"
[ 4.909] (WW) Warning, couldn't open module vesa
[ 4.909] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.909] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 4.909] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.910] (WW) Falling back to old probe method for modesetting
[ 4.910] (II) modeset(1): using default device
[ 4.911] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 4.911] (EE) Screen 0 deleted because of no matching config section.
[ 4.911] (II) UnloadModule: "modesetting"
[ 4.911] (EE)
Fatal server error:
[ 4.911] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
[ 4.911] (EE)
[ 4.911] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4.911] (EE) Please also check the log file at "/home/andry/.local/share/xorg/Xorg.0.log" for additional information.
[ 4.911] (EE)
[ 4.962] (EE) Server terminated with error (1). Closing log file.Offline