You are not logged in.

#1 2022-07-24 08:33:45

demensdeum
Member
From: Hyperborea
Registered: 2022-07-02
Posts: 40
Website

Intel + Nvidia does not detect external monitor [SOLVED]

uname -a

5.18.13-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 22 Jul 2022 13:05:04 +0000 x86_64 GNU/Linux

nvidia-settings -v

nvidia-settings:  version 515.57

dmesg
https://pastebin.com/UUDDniLD

Xorg.0.log
https://pastebin.com/y1KEnbZg

Laptop
https://www.acer.com/ac/en/IL/content/p … rhelios300

/usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf

Section "OutputClass"
    Identifier "nvidia"
    MatchDriver "nvidia-drm"
    Driver "nvidia"
    Option "AllowEmptyInitialConfiguration"
    ModulePath "/usr/lib/nvidia/xorg"
    ModulePath "/usr/lib/xorg/modules"
EndSection

grub.cfg

menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-66a4bfd8-01>
        load_video
        set gfxpayload=keep
        insmod gzio
        insmod part_gpt
        insmod fat
        set root='hd0,gpt1'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  EF0A-1FA4
        else
          search --no-floppy --fs-uuid --set=root EF0A-1FA4
        fi
        echo    'Loading Linux linux ...'
        linux   /vmlinuz-linux root=UUID=66a4bfd8-015c-4c59-b10e-d6d79e7f661d rw  loglevel=3 quiet ibt=off
        echo    'Loading initial ramdisk ...'
        initrd  /initramfs-linux.img
}

xrandr

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 340mm x 190mm
   1920x1080    144.00*+
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

xrandr --listproviders

Providers: number : 1
Provider 0: id: 0x45 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 3 associated providers: 0 name:Intel

*No /etc/X11/xorg.conf*

I think after some system update, can't detect external monitor in hdmi-1 anymore.
Both monitors works at the same time in Win11.
I can have *only* external monitor to work if I run nvidia-xconfig, it creates /etc/X11/xorg.conf, but then internal display does not work; it's like I can have only internal display or external display with nvidia-xconfig.

Any suggestions?

Last edited by demensdeum (2022-07-24 13:18:50)

Offline

#2 2022-07-24 11:35:43

seth
Member
Registered: 2012-09-03
Posts: 60,000

Re: Intel + Nvidia does not detect external monitor [SOLVED]

if I run nvidia-xconfig

Don't, terrible idea in general and esp. for optimus systems.

The HDMI is most likely wired to the nvidia chip.
The nvida module loads, but extremely late (17+ seconds into the boot).
=> does the provider get detected when you restart the X11 server after the boot?
Do you use optimus-mananger or bbswitch/acpi_call to power off the nvidia chip?

Both monitors works at the same time in Win11.

Also see the 3rd link below.

Offline

#3 2022-07-24 12:03:07

demensdeum
Member
From: Hyperborea
Registered: 2022-07-02
Posts: 40
Website

Re: Intel + Nvidia does not detect external monitor [SOLVED]

Don't, terrible idea in general and esp. for optimus systems.

Understood

The HDMI is most likely wired to the nvidia chip.

Probably

The nvida module loads, but extremely late (17+ seconds into the boot).
=> does the provider get detected when you restart the X11 server after the boot?

I am wondering how to check that, can you help with terminal commands?
All I can say right now that when I kill Xorg, it restarts ok:

xrandr --listproviders

Providers: number : 1
Provider 0: id: 0x45 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 3 associated providers: 0 name:Intel

Do you use optimus-mananger or bbswitch/acpi_call to power off the nvidia chip?

No

optirun glxgears + nvidia-smi

Sun Jul 24 15:09:00 2022       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 515.57       Driver Version: 515.57       CUDA Version: 11.7     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|                               |                      |               MIG M. |
|===============================+======================+======================|
|   0  NVIDIA GeForce ...  Off  | 00000000:01:00.0 Off |                  N/A |
| N/A   47C    P0    22W /  N/A |     12MiB /  8192MiB |     28%      Default |
|                               |                      |                  N/A |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                                  |
|  GPU   GI   CI        PID   Type   Process name                  GPU Memory |
|        ID   ID                                                   Usage      |
|=============================================================================|
|    0   N/A  N/A      3160      G   /usr/lib/Xorg                       7MiB |
|    0   N/A  N/A      3167      G   glxgears                            3MiB |
+-----------------------------------------------------------------------------+

Also see the 3rd link below.

Fastboot in BIOS disabled, I switch between systems by boot order in bios (F12 key on laptop boot), Arch Linux installed on separate SSD.

Last edited by demensdeum (2022-07-24 12:09:46)

Offline

#4 2022-07-24 12:16:21

seth
Member
Registered: 2012-09-03
Posts: 60,000

Re: Intel + Nvidia does not detect external monitor [SOLVED]

Fastboot in BIOS …  installed on separate SSD.

Is completely irrelevant. Windows fast start is a windows setting that has nothing to do with your BIOS.
Windows hibernates by default even if you shut it down - this causes two OS running the HW in parallel and to all sorts of freakish behavior.

All I can say right now that when I kill Xorg, it restarts ok:

But still ignores the nvidia chip, what file contains the intel driver setting?

grep -ri intel /{usr/share,etc}/X11/xorg.conf*

Also post the output of "lspci" so we're not chaing a dead goose here (in case the nvidia chip has no crtc at all)

Offline

#5 2022-07-24 12:28:45

demensdeum
Member
From: Hyperborea
Registered: 2022-07-02
Posts: 40
Website

Re: Intel + Nvidia does not detect external monitor [SOLVED]

But still ignores the nvidia chip

Probably

what file contains the intel driver setting?

[demensdeum@DEMENSACERCP2077 ~]$ grep -ri intel /{usr/share,etc}/X11/xorg.conf*
[demensdeum@DEMENSACERCP2077 ~]$ 

Return nothing

Also post the output of "lspci" so we're not chaing a dead goose here (in case the nvidia chip has no crtc at all)

lspci

lspci
00:00.0 Host bridge: Intel Corporation 10th Gen Core Processor Host Bridge/DRAM Registers (rev 02)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 02)
00:02.0 VGA compatible controller: Intel Corporation CometLake-H GT2 [UHD Graphics] (rev 05)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 02)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Comet Lake PCH Thermal Controller
00:14.0 USB controller: Intel Corporation Comet Lake USB 3.1 xHCI Host Controller
00:14.2 RAM memory: Intel Corporation Comet Lake PCH Shared SRAM
00:14.3 Network controller: Intel Corporation Comet Lake PCH CNVi WiFi
00:15.0 Serial bus controller: Intel Corporation Comet Lake PCH Serial IO I2C Controller #0
00:15.1 Serial bus controller: Intel Corporation Comet Lake PCH Serial IO I2C Controller #1
00:16.0 Communication controller: Intel Corporation Comet Lake HECI Controller
00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode]
00:1d.0 PCI bridge: Intel Corporation Device 06b5 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Comet Lake LPC Controller
00:1f.3 Audio device: Intel Corporation Comet Lake PCH cAVS
00:1f.4 SMBus: Intel Corporation Comet Lake PCH SMBus Controller
00:1f.5 Serial bus controller: Intel Corporation Comet Lake PCH SPI Controller
01:00.0 VGA compatible controller: NVIDIA Corporation GA104M [GeForce RTX 3080 Mobile / Max-Q 8GB/16GB] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GA104 High Definition Audio Controller (rev a1)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 2600 (rev 21)

Is completely irrelevant. Windows fast start is a windows setting that has nothing to do with your BIOS.
Windows hibernates by default even if you shut it down - this causes two OS running the HW in parallel and to all sorts of freakish behavior.

Oh do you mean this new "Fast Startup", thanks I will check it, though it was about good-old BIOS Fastboot.

Offline

#6 2022-07-24 12:41:39

seth
Member
Registered: 2012-09-03
Posts: 60,000

Re: Intel + Nvidia does not detect external monitor [SOLVED]

optirun glxgears + nvidia-smi

Errr… you're using https://wiki.archlinux.org/title/Bumblebee ?
https://wiki.archlinux.org/title/Bumble … e_monitors but you don't actually want to do this.
nvida supports prime and that's the more convenient and efficient approach.

Offline

#7 2022-07-24 12:42:51

demensdeum
Member
From: Hyperborea
Registered: 2022-07-02
Posts: 40
Website

Re: Intel + Nvidia does not detect external monitor [SOLVED]

Fast Startup was enabled, disabled Win11 Fast Startup in Control Panel, checked zero status in PowerShell, shutdown laptop, booted to Arch Linux, external monitor does not work.
xrandr

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 340mm x 190mm
   1920x1080    144.00*+
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

Offline

#8 2022-07-24 12:51:09

demensdeum
Member
From: Hyperborea
Registered: 2022-07-02
Posts: 40
Website

Re: Intel + Nvidia does not detect external monitor [SOLVED]

seth wrote:

nvida supports prime and that's the more convenient and efficient approach.

prime-run glxgears
X Error of failed request:  BadValue (integer parameter out of range for operation)
  Major opcode of failed request:  152 (GLX)
  Minor opcode of failed request:  3 (X_GLXCreateContext)
  Value in failed request:  0x0
  Serial number of failed request:  26
  Current serial number in output stream:  27

Is that related somehow?

Offline

#9 2022-07-24 12:57:51

seth
Member
Registered: 2012-09-03
Posts: 60,000

Re: Intel + Nvidia does not detect external monitor [SOLVED]

prime-run doesn't work because the GPU isn't assigned to that server and that's most likely because of bumblebee (w/ your dmesg I'm pretty sure it deactivates the GPU, blacklists the nvidia module or something else)

modprobe -c | grep nvidia

Unless you're using it for a specific reason, get rid of bumblebee, things should afterwards justwork™

Offline

#10 2022-07-24 13:00:51

demensdeum
Member
From: Hyperborea
Registered: 2022-07-02
Posts: 40
Website

Re: Intel + Nvidia does not detect external monitor [SOLVED]

I had a feeling that NVIDIA driver is buggy, got kernel panic after using this config:

https://wiki.archlinux.org/title/Bumblebee#Multiple_monitors

Think need to collection kernel logs...

Offline

#11 2022-07-24 13:08:25

seth
Member
Registered: 2012-09-03
Posts: 60,000

Re: Intel + Nvidia does not detect external monitor [SOLVED]

The BusIDs in the example don't match yours and you probably have still the nvidia kernel module blacklisted / the chip powered down.

seth wrote:

Unless you're using it for a specific reason, get rid of bumblebee, things should afterwards justwork™

If not, post an updated system journal.

Offline

#12 2022-07-24 13:10:14

demensdeum
Member
From: Hyperborea
Registered: 2022-07-02
Posts: 40
Website

Re: Intel + Nvidia does not detect external monitor [SOLVED]

seth wrote:

prime-run doesn't work because the GPU isn't assigned to that server and that's most likely because of bumblebee (w/ your dmesg I'm pretty sure it deactivates the GPU, blacklists the nvidia module or something else)

modprobe -c | grep nvidia

Unless you're using it for a specific reason, get rid of bumblebee, things should afterwards justwork™

Wow! Thanks, after removing bumblebee xrandr shows HDMI-1 connected:
xrandr

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 340mm x 190mm
   1920x1080    144.00*+
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
DP-1-0 disconnected (normal left inverted right x axis y axis)
DP-1-1 disconnected (normal left inverted right x axis y axis)
HDMI-1-0 connected (normal left inverted right x axis y axis)
   1920x1080     60.00 +  60.00    59.94    50.00    23.98  
   1680x1050     59.95  
   1366x768      59.96  
   1280x1024     60.02  
   1280x960      60.00  
   1280x800      59.81  
   1280x720      60.00    59.94    50.00  
   1024x768      60.00  
   800x600       60.32    56.25  
   720x576       50.00  
   720x480       59.94  
   640x480       59.94    59.93

Just enabled second screen in KDE display setting, and it's working! But like after 30s seconds second display disabling by itself. I will check more rn.

Offline

#13 2022-07-24 13:18:24

demensdeum
Member
From: Hyperborea
Registered: 2022-07-02
Posts: 40
Website

Re: Intel + Nvidia does not detect external monitor [SOLVED]

Removing bumblebee fixed everything, Arch Linux one love -> [SOLVED]

Offline

Board footer

Powered by FluxBB