[SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

dimich · 2022-07-24 17:06:49

Recently i upgraded videocard to GeForce GTX 1660S and encountered a problem with VGA console.

With proprietary driver (nvidia 515.57-7):

When display manager (xdm-archlinux) autostart is enabled, after switching to console (Ctrl+Alt+F1) i can login and console seems working until shell prompt goes down below bottom line. Screen should scroll up but nothing happens, no any update on screen, no blinking cursor. If i switch to another VT and back (Alt+F2, Alt+F1) screen becomes updated, prompt is on bottom line and cursor is visible until it goes down again.

When display manager autostart disabled: monitor goes to powersave mode immediately after boot, last visible line is "Loading kernel modules". I can login blindly, i can switch to another VT with Alt+Fx (keyboard LEDs state is kept for each VT), but monitor remains in powersave. If i start XDM service blindly from command line or over ssh, monitor wakes up and works in graphics mode.

I tried to play with modeset parameter for nvidia-drm module - no difference except /sys/class/drm/ content. I set NVreg_PreserveVideoMemoryAllocations parameter to 1 and 0 for nvidia module - no effect.

I tried older proprietary driver i used before upgrade (nvidia-470xx-dkms from AUR), behaviour is the same except monitor doesn't go to powersave but display remains blank/black.

Also i tried nouveau. When XDM autostart disabled, display is blank after boot (the same as for nvidia-470xx-dkms). When i switch to console from graphics mode (Ctlr+Alt+F1) mouse pointer disappears but picture remains the same, even video mode is not changed (but VTs are alive).

I'm curiuos, are all more or less modern Nvidia cards affected by this bug or this model only? I haven't seen this problem on my old GeForce GT 640 with nvidia-470xx-dkms.
Is it driver/firmware bug or kernel bug? Console on FreeDOS LiveCD works fine.

I wouldn't say i often use VGA console but sometimes it is necessary. I appreciate for any suggestions how to fix it.

Last edited by dimich (2022-09-15 21:06:41)

glenjo · 2022-07-24 19:11:56

My console works fine, but I'm using a rather older GeForce GTX 1050 with nvidia 515.57.

seth · 2022-07-24 20:15:40

Please post a complete system journal.

Does this also happen when you boot "nomodeset"?
(you won't get a graphical target, but we care about the console behavior anyway)

You may want to enforce a specific resolution, https://raw.githubusercontent.com/torva … modedb.rst

dimich · 2022-07-25 09:09:37

I narrowed the problem little bit.

With `nvidia_drm modeset=0` console is broken only when X server is running. If i terminate X server console recovers to normal operation.
With `nvidia_drm modeset=1` monitor goes to powersave after module loaded and wakes up after nvidia_drm module unloaded.

`nomodeset` has no any effect, graphical target is reached normally (when enabled by systemd).
I don't use GFX in grub, if it matters. In /etc/default/grub i have:

GRUB_TERMINAL_INPUT="console"
GRUB_TERMINAL_OUTPUT="console"
#GRUB_GFXMODE="auto"

Kernel log with `nvidia_drm modeset=0`:

[    0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-16
[    0.000000] Linux version 5.18.14-arch1-1 (linux@archlinux) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT_DYNAMIC Sat, 23 Jul 2022 11:46:17 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ca49664d-30d4-4d05-8855-ed88f7aea367 rw audit=0 resume=LABEL=SWAP systemd.unified_cgroup_hierarchy=true lsm=landlock,lockdown,yama,apparmor,bpf pcie_aspm=off nomodeset
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000025a4ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000025a50000-0x0000000025a50fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000025a51000-0x0000000025a51fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000025a52000-0x000000002ea06fff] usable
[    0.000000] BIOS-e820: [mem 0x000000002ea07000-0x000000002ee6efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000002ee6f000-0x000000002efddfff] usable
[    0.000000] BIOS-e820: [mem 0x000000002efde000-0x000000002f3a6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000002f3a7000-0x000000002fffefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000002ffff000-0x000000002fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000030000000-0x0000000038ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000020c4ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. Z390 D/Z390 D, BIOS F2 10/15/2019
[    0.000000] tsc: Detected 3000.000 MHz processor
[    0.000425] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000427] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000433] last_pfn = 0x20c5000 max_arch_pfn = 0x400000000
[    0.000514] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000999] last_pfn = 0x30000 max_arch_pfn = 0x400000000
[    0.006007] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f]
[    0.006018] Using GB pages for direct mapping
[    0.006372] RAMDISK: [mem 0x2cc05000-0x2dee5fff]
[    0.006376] ACPI: Early table checksum verification disabled
[    0.006378] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.006381] ACPI: XSDT 0x000000002F2FB0A8 0000CC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006385] ACPI: FACP 0x000000002F33BD88 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.006388] ACPI: DSDT 0x000000002F2FB208 040B80 (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.006390] ACPI: FACS 0x000000002F3A6080 000040
[    0.006392] ACPI: APIC 0x000000002F33BEA0 0000BC (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.006394] ACPI: FPDT 0x000000002F33BF60 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006396] ACPI: FIDT 0x000000002F33BFA8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006398] ACPI: MCFG 0x000000002F33C048 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.006400] ACPI: SSDT 0x000000002F33C088 000204 (v01 ALASKA A M I    00001000 INTL 20160527)
[    0.006402] ACPI: SSDT 0x000000002F33C290 0017D5 (v02 ALASKA A M I    00003000 INTL 20160527)
[    0.006404] ACPI: SSDT 0x000000002F33DA68 008602 (v01 ALASKA A M I    00000001 INTL 20160527)
[    0.006406] ACPI: SSDT 0x000000002F346070 0031C7 (v02 ALASKA A M I    00003000 INTL 20160527)
[    0.006408] ACPI: SSDT 0x000000002F349238 002358 (v02 ALASKA A M I    00001000 INTL 20160527)
[    0.006410] ACPI: HPET 0x000000002F34B590 000038 (v01 ALASKA A M I    00000002      01000013)
[    0.006412] ACPI: SSDT 0x000000002F34B5C8 000F9E (v02 ALASKA A M I    00001000 INTL 20160527)
[    0.006413] ACPI: SSDT 0x000000002F34C568 002D1B (v02 ALASKA A M I    00000000 INTL 20160527)
[    0.006415] ACPI: UEFI 0x000000002F34F288 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.006417] ACPI: LPIT 0x000000002F34F2D0 00005C (v01 ALASKA A M I    00000002      01000013)
[    0.006419] ACPI: SSDT 0x000000002F34F330 0027DE (v02 ALASKA A M I    00001000 INTL 20160527)
[    0.006421] ACPI: SSDT 0x000000002F351B10 000FFE (v02 ALASKA A M I    00000000 INTL 20160527)
[    0.006423] ACPI: DBGP 0x000000002F352B10 000034 (v01 ALASKA A M I    00000002      01000013)
[    0.006425] ACPI: DBG2 0x000000002F352B48 000054 (v00 ALASKA A M I    00000002      01000013)
[    0.006427] ACPI: DMAR 0x000000002F352BA0 000070 (v01 ALASKA A M I    00000002      01000013)
[    0.006429] ACPI: WSMT 0x000000002F352C10 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006430] ACPI: Reserving FACP table memory at [mem 0x2f33bd88-0x2f33be9b]
[    0.006431] ACPI: Reserving DSDT table memory at [mem 0x2f2fb208-0x2f33bd87]
[    0.006432] ACPI: Reserving FACS table memory at [mem 0x2f3a6080-0x2f3a60bf]
[    0.006433] ACPI: Reserving APIC table memory at [mem 0x2f33bea0-0x2f33bf5b]
[    0.006433] ACPI: Reserving FPDT table memory at [mem 0x2f33bf60-0x2f33bfa3]
[    0.006434] ACPI: Reserving FIDT table memory at [mem 0x2f33bfa8-0x2f33c043]
[    0.006434] ACPI: Reserving MCFG table memory at [mem 0x2f33c048-0x2f33c083]
[    0.006435] ACPI: Reserving SSDT table memory at [mem 0x2f33c088-0x2f33c28b]
[    0.006436] ACPI: Reserving SSDT table memory at [mem 0x2f33c290-0x2f33da64]
[    0.006436] ACPI: Reserving SSDT table memory at [mem 0x2f33da68-0x2f346069]
[    0.006437] ACPI: Reserving SSDT table memory at [mem 0x2f346070-0x2f349236]
[    0.006438] ACPI: Reserving SSDT table memory at [mem 0x2f349238-0x2f34b58f]
[    0.006438] ACPI: Reserving HPET table memory at [mem 0x2f34b590-0x2f34b5c7]
[    0.006439] ACPI: Reserving SSDT table memory at [mem 0x2f34b5c8-0x2f34c565]
[    0.006440] ACPI: Reserving SSDT table memory at [mem 0x2f34c568-0x2f34f282]
[    0.006440] ACPI: Reserving UEFI table memory at [mem 0x2f34f288-0x2f34f2c9]
[    0.006441] ACPI: Reserving LPIT table memory at [mem 0x2f34f2d0-0x2f34f32b]
[    0.006442] ACPI: Reserving SSDT table memory at [mem 0x2f34f330-0x2f351b0d]
[    0.006442] ACPI: Reserving SSDT table memory at [mem 0x2f351b10-0x2f352b0d]
[    0.006443] ACPI: Reserving DBGP table memory at [mem 0x2f352b10-0x2f352b43]
[    0.006444] ACPI: Reserving DBG2 table memory at [mem 0x2f352b48-0x2f352b9b]
[    0.006444] ACPI: Reserving DMAR table memory at [mem 0x2f352ba0-0x2f352c0f]
[    0.006445] ACPI: Reserving WSMT table memory at [mem 0x2f352c10-0x2f352c37]
[    0.006690] No NUMA configuration found
[    0.006691] Faking a node at [mem 0x0000000000000000-0x00000020c4ffffff]
[    0.006693] NODE_DATA(0) allocated [mem 0x20c4ffc000-0x20c4ffffff]
[    0.006786] Zone ranges:
[    0.006787]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006788]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006789]   Normal   [mem 0x0000000100000000-0x00000020c4ffffff]
[    0.006790]   Device   empty
[    0.006791] Movable zone start for each node
[    0.006792] Early memory node ranges
[    0.006792]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.006793]   node   0: [mem 0x0000000000100000-0x0000000025a4ffff]
[    0.006794]   node   0: [mem 0x0000000025a52000-0x000000002ea06fff]
[    0.006795]   node   0: [mem 0x000000002ee6f000-0x000000002efddfff]
[    0.006795]   node   0: [mem 0x000000002ffff000-0x000000002fffffff]
[    0.006796]   node   0: [mem 0x0000000100000000-0x00000020c4ffffff]
[    0.006805] Initmem setup node 0 [mem 0x0000000000001000-0x00000020c4ffffff]
[    0.006808] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.006824] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.007530] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.007543] On node 0, zone DMA32: 1128 pages in unavailable ranges
[    0.007578] On node 0, zone DMA32: 4129 pages in unavailable ranges
[    0.167059] On node 0, zone Normal: 12288 pages in unavailable ranges
[    0.167623] ACPI: PM-Timer IO Port: 0x1808
[    0.167628] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.167629] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.167629] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.167630] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.167631] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.167631] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.167632] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.167632] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.167698] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.167699] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.167701] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.167703] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.167704] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.167706] TSC deadline timer available
[    0.167707] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.167718] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.167720] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.167721] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.167721] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.167722] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.167723] PM: hibernation: Registered nosave memory: [mem 0x25a50000-0x25a50fff]
[    0.167724] PM: hibernation: Registered nosave memory: [mem 0x25a51000-0x25a51fff]
[    0.167725] PM: hibernation: Registered nosave memory: [mem 0x2ea07000-0x2ee6efff]
[    0.167726] PM: hibernation: Registered nosave memory: [mem 0x2efde000-0x2f3a6fff]
[    0.167726] PM: hibernation: Registered nosave memory: [mem 0x2f3a7000-0x2fffefff]
[    0.167728] PM: hibernation: Registered nosave memory: [mem 0x30000000-0x38ffffff]
[    0.167728] PM: hibernation: Registered nosave memory: [mem 0x39000000-0xdfffffff]
[    0.167729] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.167729] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.167730] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.167730] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.167731] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.167731] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.167732] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.167732] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.167733] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.167734] [mem 0x39000000-0xdfffffff] available for PCI devices
[    0.167735] Booting paravirtualized kernel on bare hardware
[    0.167736] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.171120] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.171236] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[    0.171241] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[    0.171243] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.171257] Fallback order for Node 0: 0 
[    0.171259] Built 1 zonelists, mobility grouping on.  Total pages: 32980359
[    0.171260] Policy zone: Normal
[    0.171261] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ca49664d-30d4-4d05-8855-ed88f7aea367 rw audit=0 resume=LABEL=SWAP systemd.unified_cgroup_hierarchy=true lsm=landlock,lockdown,yama,apparmor,bpf pcie_aspm=off nomodeset
[    0.171288] audit: disabled (until reboot)
[    0.171321] PCIe ASPM is disabled
[    0.171331] Booted with the nomodeset parameter. Only the system framebuffer will be available
[    0.171332] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[    0.173281] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[    0.174245] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.174359] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.384485] Memory: 131690916K/134016068K available (14343K kernel code, 2099K rwdata, 11012K rodata, 1868K init, 3852K bss, 2324892K reserved, 0K cma-reserved)
[    0.385112] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.385137] ftrace: allocating 44939 entries in 176 pages
[    0.390465] ftrace: allocated 176 pages with 3 groups
[    0.390520] Dynamic Preempt: full
[    0.390576] rcu: Preemptible hierarchical RCU implementation.
[    0.390576] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.390577] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.390578] 	Trampoline variant of Tasks RCU enabled.
[    0.390578] 	Rude variant of Tasks RCU enabled.
[    0.390579] 	Tracing variant of Tasks RCU enabled.
[    0.390579] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.390580] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.394020] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.394566] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.394584] random: crng init done
[    0.400727] Console: colour VGA+ 80x25
[    0.400736] printk: console [tty0] enabled
[    0.400749] ACPI: Core revision 20211217
[    0.401142] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.401284] APIC: Switch to symmetric I/O mode setup
[    0.401286] DMAR: Host address width 39
[    0.401287] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.401290] DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.401292] DMAR: RMRR base: 0x0000002f98e000 end: 0x0000002fbd7fff
[    0.401294] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 0
[    0.401295] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.401295] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.404287] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.404288] x2apic enabled
[    0.404319] Switched APIC routing to cluster x2apic.
[    0.413722] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.427902] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3e459bf4c, max_idle_ns: 440795289890 ns
[    0.427905] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.00 BogoMIPS (lpj=10000000)
[    0.427908] pid_max: default: 32768 minimum: 301
[    0.427925] LSM: Security Framework initializing
[    0.427930] landlock: Up and running.
[    0.427932] Yama: becoming mindful.
[    0.427944] AppArmor: AppArmor initialized
[    0.427947] LSM support for eBPF active
[    0.428034] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.428113] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.428256] CPU0: Thermal monitoring enabled (TM1)
[    0.428298] process: using mwait in idle threads
[    0.428299] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.428300] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.428304] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.428305] Spectre V2 : Mitigation: Enhanced IBRS
[    0.428306] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.428306] RETBleed: Mitigation: Enhanced IBRS
[    0.428307] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.428309] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.428311] TAA: Mitigation: TSX disabled
[    0.428311] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.428312] SRBDS: Mitigation: Microcode
[    0.433516] Freeing SMP alternatives memory: 36K
[    0.434613] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1570
[    0.434638] smpboot: CPU0: Intel(R) Core(TM) i7-9700F CPU @ 3.00GHz (family: 0x6, model: 0x9e, stepping: 0xd)
[    0.434722] cblist_init_generic: Setting adjustable number of callback queues.
[    0.434723] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.434733] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.434742] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.434749] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.434763] ... version:                4
[    0.434763] ... bit width:              48
[    0.434764] ... generic registers:      8
[    0.434764] ... value mask:             0000ffffffffffff
[    0.434765] ... max period:             00007fffffffffff
[    0.434765] ... fixed-purpose events:   3
[    0.434766] ... event mask:             00000007000000ff
[    0.434823] rcu: Hierarchical SRCU implementation.
[    0.435272] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.435319] smp: Bringing up secondary CPUs ...
[    0.435371] x86: Booting SMP configuration:
[    0.435372] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.441792] smp: Brought up 1 node, 8 CPUs
[    0.441792] smpboot: Max logical packages: 1
[    0.441792] smpboot: Total of 8 processors activated (48019.00 BogoMIPS)
[    0.446071] devtmpfs: initialized
[    0.446071] x86/mm: Memory block size: 2048MB
[    0.446071] ACPI: PM: Registering ACPI NVS region [mem 0x25a50000-0x25a50fff] (4096 bytes)
[    0.446071] ACPI: PM: Registering ACPI NVS region [mem 0x2efde000-0x2f3a6fff] (3969024 bytes)
[    0.446071] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.446071] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.446071] pinctrl core: initialized pinctrl subsystem
[    0.446071] PM: RTC time: 07:38:05, date: 2022-07-25
[    0.446071] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.446071] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.446071] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.446071] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.446071] thermal_sys: Registered thermal governor 'fair_share'
[    0.446071] thermal_sys: Registered thermal governor 'bang_bang'
[    0.446071] thermal_sys: Registered thermal governor 'step_wise'
[    0.446071] thermal_sys: Registered thermal governor 'user_space'
[    0.446071] thermal_sys: Registered thermal governor 'power_allocator'
[    0.446071] cpuidle: using governor ladder
[    0.446071] cpuidle: using governor menu
[    0.446071] HugeTLB: can free 4095 vmemmap pages for hugepages-1048576kB
[    0.446071] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.446071] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.446071] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.446071] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.446071] PCI: Using configuration type 1 for base access
[    0.448687] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.448691] HugeTLB: can free 7 vmemmap pages for hugepages-2048kB
[    0.448691] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.448691] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.448691] ACPI: Added _OSI(Module Device)
[    0.448691] ACPI: Added _OSI(Processor Device)
[    0.448691] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.448691] ACPI: Added _OSI(Processor Aggregator Device)
[    0.448691] ACPI: Added _OSI(Linux-Dell-Video)
[    0.448691] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.448691] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.505840] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    1.067649] ACPI: Dynamic OEM Table Load:
[    1.067654] ACPI: SSDT 0xFFFF9D2E011C0800 0006C6 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    1.068502] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    1.069774] ACPI: Dynamic OEM Table Load:
[    1.069778] ACPI: SSDT 0xFFFF9D2E011B4800 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    1.070858] ACPI: Dynamic OEM Table Load:
[    1.070863] ACPI: SSDT 0xFFFF9D2E0012F000 000EF1 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    1.072228] ACPI: Dynamic OEM Table Load:
[    1.072231] ACPI: SSDT 0xFFFF9D2E011B5000 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    1.073011] ACPI: Dynamic OEM Table Load:
[    1.073014] ACPI: SSDT 0xFFFF9D2E011B3800 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    1.077004] ACPI: Interpreter enabled
[    1.077033] ACPI: PM: (supports S0 S3 S4 S5)
[    1.077033] ACPI: Using IOAPIC for interrupt routing
[    1.077061] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.078058] ACPI: Enabled 7 GPEs in block 00 to 7F
[    1.089384] ACPI: PM: Power Resource [USBC]
[    1.091557] ACPI: PM: Power Resource [V0PR]
[    1.091720] ACPI: PM: Power Resource [V1PR]
[    1.091878] ACPI: PM: Power Resource [V2PR]
[    1.096319] ACPI: PM: Power Resource [WRST]
[    1.098159] ACPI: PM: Power Resource [FN00]
[    1.098211] ACPI: PM: Power Resource [FN01]
[    1.098262] ACPI: PM: Power Resource [FN02]
[    1.098313] ACPI: PM: Power Resource [FN03]
[    1.098364] ACPI: PM: Power Resource [FN04]
[    1.098717] ACPI: PM: Power Resource [PIN]
[    1.099249] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.099254] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    1.099256] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    1.099333] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    1.100141] PCI host bridge to bus 0000:00
[    1.100142] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.100144] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.100144] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.100145] pci_bus 0000:00: root bus resource [mem 0x39000000-0xdfffffff window]
[    1.100146] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    1.100147] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    1.100148] pci_bus 0000:00: root bus resource [bus 00-fe]
[    1.100216] pci 0000:00:00.0: [8086:3e30] type 00 class 0x060000
[    1.100258] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    1.100285] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.100934] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[    1.100968] pci 0000:00:12.0: reg 0x10: [mem 0x4000219000-0x4000219fff 64bit]
[    1.101217] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    1.101252] pci 0000:00:14.0: reg 0x10: [mem 0x4000200000-0x400020ffff 64bit]
[    1.101380] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.101827] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    1.101859] pci 0000:00:14.2: reg 0x10: [mem 0x4000214000-0x4000215fff 64bit]
[    1.101881] pci 0000:00:14.2: reg 0x18: [mem 0x4000218000-0x4000218fff 64bit]
[    1.102069] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    1.102098] pci 0000:00:16.0: reg 0x10: [mem 0x4000217000-0x4000217fff 64bit]
[    1.102208] pci 0000:00:16.0: PME# supported from D3hot
[    1.102665] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[    1.102691] pci 0000:00:17.0: reg 0x10: [mem 0x3d700000-0x3d701fff]
[    1.102705] pci 0000:00:17.0: reg 0x14: [mem 0x3d703000-0x3d7030ff]
[    1.102719] pci 0000:00:17.0: reg 0x18: [io  0x8050-0x8057]
[    1.102733] pci 0000:00:17.0: reg 0x1c: [io  0x8040-0x8043]
[    1.102747] pci 0000:00:17.0: reg 0x20: [io  0x8020-0x803f]
[    1.102761] pci 0000:00:17.0: reg 0x24: [mem 0x3d702000-0x3d7027ff]
[    1.102837] pci 0000:00:17.0: PME# supported from D3hot
[    1.103322] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[    1.103483] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.104082] pci 0000:00:1b.2: [8086:a342] type 01 class 0x060400
[    1.104256] pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
[    1.104292] pci 0000:00:1b.2: PTM enabled (root), 4ns granularity
[    1.104874] pci 0000:00:1b.3: [8086:a343] type 01 class 0x060400
[    1.105049] pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold
[    1.105087] pci 0000:00:1b.3: PTM enabled (root), 4ns granularity
[    1.105699] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
[    1.105859] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.106453] pci 0000:00:1c.2: [8086:a33a] type 01 class 0x060400
[    1.106625] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.106663] pci 0000:00:1c.2: PTM enabled (root), 4ns granularity
[    1.107232] pci 0000:00:1c.3: [8086:a33b] type 01 class 0x060400
[    1.107406] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.107444] pci 0000:00:1c.3: PTM enabled (root), 4ns granularity
[    1.108024] pci 0000:00:1c.4: [8086:a33c] type 01 class 0x060400
[    1.108201] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.108243] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[    1.108845] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[    1.109023] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.109065] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    1.109703] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
[    1.110169] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[    1.110235] pci 0000:00:1f.3: reg 0x10: [mem 0x4000210000-0x4000213fff 64bit]
[    1.110331] pci 0000:00:1f.3: reg 0x20: [mem 0x4000100000-0x40001fffff 64bit]
[    1.110483] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    1.111402] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    1.111482] pci 0000:00:1f.4: reg 0x10: [mem 0x4000216000-0x40002160ff 64bit]
[    1.111594] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    1.111910] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    1.111934] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    1.112093] pci 0000:01:00.0: [10de:21c4] type 00 class 0x030000
[    1.112103] pci 0000:01:00.0: reg 0x10: [mem 0x3c000000-0x3cffffff]
[    1.112111] pci 0000:01:00.0: reg 0x14: [mem 0x40000000-0x4fffffff 64bit pref]
[    1.112119] pci 0000:01:00.0: reg 0x1c: [mem 0x3a000000-0x3bffffff 64bit pref]
[    1.112125] pci 0000:01:00.0: reg 0x24: [io  0x7000-0x707f]
[    1.112131] pci 0000:01:00.0: reg 0x30: [mem 0x3d000000-0x3d07ffff pref]
[    1.112148] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.112179] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.112223] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    1.112265] pci 0000:01:00.1: [10de:1aeb] type 00 class 0x040300
[    1.112275] pci 0000:01:00.1: reg 0x10: [mem 0x3d080000-0x3d083fff]
[    1.112364] pci 0000:01:00.2: [10de:1aec] type 00 class 0x0c0330
[    1.112376] pci 0000:01:00.2: reg 0x10: [mem 0x50000000-0x5003ffff 64bit pref]
[    1.112388] pci 0000:01:00.2: reg 0x1c: [mem 0x50040000-0x5004ffff 64bit pref]
[    1.112429] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
[    1.112463] pci 0000:01:00.3: [10de:1aed] type 00 class 0x0c8000
[    1.112472] pci 0000:01:00.3: reg 0x10: [mem 0x3d084000-0x3d084fff]
[    1.112530] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
[    1.112558] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.112560] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    1.112561] pci 0000:00:01.0:   bridge window [mem 0x3a000000-0x3d0fffff]
[    1.112563] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x500fffff 64bit pref]
[    1.112677] acpiphp: Slot [1] registered
[    1.112687] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    1.112834] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    1.112861] pci 0000:03:00.0: reg 0x10: [io  0x6000-0x60ff]
[    1.112897] pci 0000:03:00.0: reg 0x18: [mem 0x3d600000-0x3d600fff 64bit]
[    1.112919] pci 0000:03:00.0: reg 0x20: [mem 0x4000000000-0x4000003fff 64bit pref]
[    1.113054] pci 0000:03:00.0: supports D1 D2
[    1.113055] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.113178] pci 0000:00:1b.2: PCI bridge to [bus 03]
[    1.113187] pci 0000:00:1b.2:   bridge window [io  0x6000-0x6fff]
[    1.113191] pci 0000:00:1b.2:   bridge window [mem 0x3d600000-0x3d6fffff]
[    1.113199] pci 0000:00:1b.2:   bridge window [mem 0x4000000000-0x40000fffff 64bit pref]
[    1.113330] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    1.113356] pci 0000:04:00.0: reg 0x10: [io  0x5000-0x50ff]
[    1.113392] pci 0000:04:00.0: reg 0x18: [mem 0x3d504000-0x3d504fff 64bit]
[    1.113413] pci 0000:04:00.0: reg 0x20: [mem 0x3d500000-0x3d503fff 64bit]
[    1.113561] pci 0000:04:00.0: supports D1 D2
[    1.113562] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.113708] pci 0000:00:1b.3: PCI bridge to [bus 04]
[    1.113716] pci 0000:00:1b.3:   bridge window [io  0x5000-0x5fff]
[    1.113720] pci 0000:00:1b.3:   bridge window [mem 0x3d500000-0x3d5fffff]
[    1.113838] acpiphp: Slot [1-1] registered
[    1.113843] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    1.113992] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[    1.114018] pci 0000:06:00.0: reg 0x10: [io  0x4000-0x40ff]
[    1.114054] pci 0000:06:00.0: reg 0x18: [mem 0x3d404000-0x3d404fff 64bit]
[    1.114075] pci 0000:06:00.0: reg 0x20: [mem 0x3d400000-0x3d403fff 64bit]
[    1.114223] pci 0000:06:00.0: supports D1 D2
[    1.114223] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.114369] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    1.114378] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    1.114382] pci 0000:00:1c.2:   bridge window [mem 0x3d400000-0x3d4fffff]
[    1.114540] pci 0000:07:00.0: [1c00:3250] type 00 class 0x070005
[    1.114582] pci 0000:07:00.0: reg 0x10: [io  0x3000-0x30ff]
[    1.114606] pci 0000:07:00.0: reg 0x14: [mem 0x50200000-0x50207fff pref]
[    1.114629] pci 0000:07:00.0: reg 0x18: [io  0x3100-0x3103]
[    1.114722] pci 0000:07:00.0: reg 0x30: [mem 0x3d300000-0x3d307fff pref]
[    1.114859] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    1.114975] pci 0000:00:1c.3: PCI bridge to [bus 07]
[    1.114984] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    1.114988] pci 0000:00:1c.3:   bridge window [mem 0x3d300000-0x3d3fffff]
[    1.114996] pci 0000:00:1c.3:   bridge window [mem 0x50200000-0x502fffff 64bit pref]
[    1.115202] pci 0000:08:00.0: [1912:0014] type 00 class 0x0c0330
[    1.115267] pci 0000:08:00.0: reg 0x10: [mem 0x3d200000-0x3d201fff 64bit]
[    1.115588] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    1.115727] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    1.115739] pci 0000:00:1c.4:   bridge window [mem 0x3d200000-0x3d2fffff]
[    1.115897] pci 0000:09:00.0: [15b7:501a] type 00 class 0x010802
[    1.115931] pci 0000:09:00.0: reg 0x10: [mem 0x3d100000-0x3d103fff 64bit]
[    1.115979] pci 0000:09:00.0: reg 0x20: [mem 0x3d104000-0x3d1040ff 64bit]
[    1.116246] pci 0000:00:1d.0: PCI bridge to [bus 09]
[    1.116257] pci 0000:00:1d.0:   bridge window [mem 0x3d100000-0x3d1fffff]
[    1.117626] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    1.117654] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    1.117680] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    1.117706] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    1.117732] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    1.117758] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    1.117784] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    1.117810] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    1.122237] iommu: Default domain type: Translated 
[    1.122238] iommu: DMA domain TLB invalidation policy: lazy mode 
[    1.122318] SCSI subsystem initialized
[    1.122323] libata version 3.00 loaded.
[    1.122323] ACPI: bus type USB registered
[    1.122323] usbcore: registered new interface driver usbfs
[    1.122323] usbcore: registered new interface driver hub
[    1.122323] usbcore: registered new device driver usb
[    1.122323] pps_core: LinuxPPS API ver. 1 registered
[    1.122323] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.122323] PTP clock support registered
[    1.122323] EDAC MC: Ver: 3.0.0
[    1.122323] NetLabel: Initializing
[    1.122323] NetLabel:  domain hash size = 128
[    1.122323] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.122323] NetLabel:  unlabeled traffic allowed by default
[    1.122323] mctp: management component transport protocol core
[    1.122323] NET: Registered PF_MCTP protocol family
[    1.122323] PCI: Using ACPI for IRQ routing
[    1.206554] PCI: pci_cache_line_size set to 64 bytes
[    1.206749] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    1.206760] e820: reserve RAM buffer [mem 0x25a50000-0x27ffffff]
[    1.206761] e820: reserve RAM buffer [mem 0x2ea07000-0x2fffffff]
[    1.206762] e820: reserve RAM buffer [mem 0x2efde000-0x2fffffff]
[    1.206763] e820: reserve RAM buffer [mem 0x20c5000000-0x20c7ffffff]
[    1.206770] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    1.206770] pci 0000:01:00.0: vgaarb: bridge control possible
[    1.206770] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.206770] vgaarb: loaded
[    1.206770] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.206770] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    1.208964] clocksource: Switched to clocksource tsc-early
[    1.212534] VFS: Disk quotas dquot_6.6.0
[    1.212542] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.212598] AppArmor: AppArmor Filesystem Enabled
[    1.212617] pnp: PnP ACPI init
[    1.212840] system 00:00: [io  0x0a00-0x0a2f] has been reserved
[    1.212842] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    1.212843] system 00:00: [io  0x0a40-0x0a4f] has been reserved
[    1.213495] pnp 00:01: [dma 0 disabled]
[    1.213599] system 00:02: [io  0x0680-0x069f] has been reserved
[    1.213600] system 00:02: [io  0x164e-0x164f] has been reserved
[    1.213678] system 00:04: [io  0x1854-0x1857] has been reserved
[    1.213819] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.213820] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.213821] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.213822] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    1.213823] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.213824] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    1.213825] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.213826] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.213998] system 00:06: [io  0x1800-0x18fe] could not be reserved
[    1.214000] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[    1.214001] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    1.214002] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    1.214003] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    1.214004] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[    1.214005] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    1.214238] system 00:07: [io  0x2000-0x20fe] has been reserved
[    1.215665] pnp: PnP ACPI: found 9 devices
[    1.220762] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.220794] NET: Registered PF_INET protocol family
[    1.220887] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.222016] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    1.222090] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.222251] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    1.222530] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    1.222575] TCP: Hash tables configured (established 524288 bind 65536)
[    1.222680] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[    1.222845] UDP hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.223030] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.223159] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.223162] NET: Registered PF_XDP protocol family
[    1.223173] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.223176] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    1.223178] pci 0000:00:01.0:   bridge window [mem 0x3a000000-0x3d0fffff]
[    1.223180] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x500fffff 64bit pref]
[    1.223182] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    1.223205] pci 0000:00:1b.2: PCI bridge to [bus 03]
[    1.223207] pci 0000:00:1b.2:   bridge window [io  0x6000-0x6fff]
[    1.223213] pci 0000:00:1b.2:   bridge window [mem 0x3d600000-0x3d6fffff]
[    1.223217] pci 0000:00:1b.2:   bridge window [mem 0x4000000000-0x40000fffff 64bit pref]
[    1.223226] pci 0000:00:1b.3: PCI bridge to [bus 04]
[    1.223228] pci 0000:00:1b.3:   bridge window [io  0x5000-0x5fff]
[    1.223235] pci 0000:00:1b.3:   bridge window [mem 0x3d500000-0x3d5fffff]
[    1.223247] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    1.223264] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    1.223267] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    1.223273] pci 0000:00:1c.2:   bridge window [mem 0x3d400000-0x3d4fffff]
[    1.223285] pci 0000:00:1c.3: PCI bridge to [bus 07]
[    1.223288] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    1.223294] pci 0000:00:1c.3:   bridge window [mem 0x3d300000-0x3d3fffff]
[    1.223298] pci 0000:00:1c.3:   bridge window [mem 0x50200000-0x502fffff 64bit pref]
[    1.223307] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    1.223313] pci 0000:00:1c.4:   bridge window [mem 0x3d200000-0x3d2fffff]
[    1.223325] pci 0000:00:1d.0: PCI bridge to [bus 09]
[    1.223332] pci 0000:00:1d.0:   bridge window [mem 0x3d100000-0x3d1fffff]
[    1.223344] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.223345] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.223346] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.223347] pci_bus 0000:00: resource 7 [mem 0x39000000-0xdfffffff window]
[    1.223347] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    1.223348] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[    1.223349] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
[    1.223350] pci_bus 0000:01: resource 1 [mem 0x3a000000-0x3d0fffff]
[    1.223351] pci_bus 0000:01: resource 2 [mem 0x40000000-0x500fffff 64bit pref]
[    1.223352] pci_bus 0000:03: resource 0 [io  0x6000-0x6fff]
[    1.223352] pci_bus 0000:03: resource 1 [mem 0x3d600000-0x3d6fffff]
[    1.223353] pci_bus 0000:03: resource 2 [mem 0x4000000000-0x40000fffff 64bit pref]
[    1.223354] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
[    1.223355] pci_bus 0000:04: resource 1 [mem 0x3d500000-0x3d5fffff]
[    1.223355] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    1.223356] pci_bus 0000:06: resource 1 [mem 0x3d400000-0x3d4fffff]
[    1.223357] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
[    1.223358] pci_bus 0000:07: resource 1 [mem 0x3d300000-0x3d3fffff]
[    1.223358] pci_bus 0000:07: resource 2 [mem 0x50200000-0x502fffff 64bit pref]
[    1.223359] pci_bus 0000:08: resource 1 [mem 0x3d200000-0x3d2fffff]
[    1.223360] pci_bus 0000:09: resource 1 [mem 0x3d100000-0x3d1fffff]
[    1.224603] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    1.224643] pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
[    1.224832] pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
[    1.225140] PCI: CLS 64 bytes, default 64
[    1.225151] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.225152] software IO TLB: mapped [mem 0x0000000028c05000-0x000000002cc05000] (64MB)
[    1.225180] Trying to unpack rootfs image as initramfs...
[    1.225196] sgx: EPC section 0x30200000-0x35f7ffff
[    1.235056] Initialise system trusted keyrings
[    1.235064] Key type blacklist registered
[    1.235089] workingset: timestamp_bits=41 max_order=25 bucket_order=0
[    1.235721] zbud: loaded
[    1.235835] integrity: Platform Keyring initialized
[    1.235837] integrity: Machine keyring initialized
[    1.240835] Key type asymmetric registered
[    1.240835] Asymmetric key parser 'x509' registered
[    2.056500] Freeing initrd memory: 19332K
[    2.057972] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    2.057988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    2.058007] io scheduler mq-deadline registered
[    2.058008] io scheduler kyber registered
[    2.058027] io scheduler bfq registered
[    2.063592] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.063913] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    2.063924] ACPI: button: Sleep Button [SLPB]
[    2.063938] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    2.063959] ACPI: button: Power Button [PWRB]
[    2.063972] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.064630] ACPI: button: Power Button [PWRF]
[    2.244716] tsc: Refined TSC clocksource calibration: 2999.992 MHz
[    2.244720] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e3dd91bf, max_idle_ns: 440795234040 ns
[    2.244768] clocksource: Switched to clocksource tsc
[    4.088235] ACPI: \_TZ_.TZ10: Invalid passive threshold
[    4.088445] thermal LNXTHERM:00: registered as thermal_zone0
[    4.088446] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    4.088674] thermal LNXTHERM:01: registered as thermal_zone1
[    4.088675] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    4.088804] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.089605] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    4.091616] Non-volatile memory driver v1.3
[    4.091617] Linux agpgart interface v0.103
[    4.091618] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    4.091697] ACPI: bus type drm_connector registered
[    4.093050] ahci 0000:00:17.0: version 3.0
[    4.103390] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x37 impl SATA mode
[    4.103392] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst 
[    4.141695] scsi host0: ahci
[    4.141935] scsi host1: ahci
[    4.142184] scsi host2: ahci
[    4.142343] scsi host3: ahci
[    4.142504] scsi host4: ahci
[    4.142663] scsi host5: ahci
[    4.142687] ata1: SATA max UDMA/133 abar m2048@0x3d702000 port 0x3d702100 irq 130
[    4.142690] ata2: SATA max UDMA/133 abar m2048@0x3d702000 port 0x3d702180 irq 130
[    4.142692] ata3: SATA max UDMA/133 abar m2048@0x3d702000 port 0x3d702200 irq 130
[    4.142693] ata4: DUMMY
[    4.142695] ata5: SATA max UDMA/133 abar m2048@0x3d702000 port 0x3d702300 irq 130
[    4.142697] ata6: SATA max UDMA/133 abar m2048@0x3d702000 port 0x3d702380 irq 130
[    4.142726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.142727] ehci-pci: EHCI PCI platform driver
[    4.142733] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.142734] ohci-pci: OHCI PCI platform driver
[    4.142755] uhci_hcd: USB Universal Host Controller Interface driver
[    4.142774] usbcore: registered new interface driver usbserial_generic
[    4.142776] usbserial: USB Serial support registered for generic
[    4.142943] rtc_cmos 00:03: RTC can wake from S4
[    4.144564] rtc_cmos 00:03: registered as rtc0
[    4.144911] rtc_cmos 00:03: setting system clock to 2022-07-25T07:38:09 UTC (1658734689)
[    4.144926] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    4.145194] intel_pstate: Intel P-state driver initializing
[    4.145561] intel_pstate: Disabling energy efficiency optimization
[    4.145561] intel_pstate: HWP enabled
[    4.145799] ledtrig-cpu: registered to indicate activity on CPUs
[    4.145954] hid: raw HID events driver (C) Jiri Kosina
[    4.145987] intel_pmc_core INT33A1:00:  initialized
[    4.146030] drop_monitor: Initializing network drop monitor service
[    4.155992] Initializing XFRM netlink socket
[    4.156048] NET: Registered PF_INET6 protocol family
[    4.158054] Segment Routing with IPv6
[    4.158055] RPL Segment Routing with IPv6
[    4.158061] In-situ OAM (IOAM) with IPv6
[    4.158075] NET: Registered PF_PACKET protocol family
[    4.158745] microcode: sig=0x906ed, pf=0x2, revision=0xf0
[    4.158968] microcode: Microcode Update Driver: v2.2.
[    4.158971] IPI shorthand broadcast: enabled
[    4.158977] sched_clock: Marking stable (4145285269, 13393601)->(4165041941, -6363071)
[    4.159222] registered taskstats version 1
[    4.159662] Loading compiled-in X.509 certificates
[    4.161948] Loaded X.509 cert 'Build time autogenerated kernel key: 94139d29b5e5062a3b6efbdd37afad226b54efe2'
[    4.162313] zswap: loaded using pool lz4/z3fold
[    4.162650] Key type ._fscrypt registered
[    4.162651] Key type .fscrypt registered
[    4.162652] Key type fscrypt-provisioning registered
[    4.162672] AppArmor: AppArmor sha1 policy hashing enabled
[    4.163545] PM:   Magic number: 14:207:623
[    4.163641] RAS: Correctable Errors collector initialized.
[    4.455051] ata6: SATA link down (SStatus 4 SControl 300)
[    4.458471] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.458527] ata3: SATA link down (SStatus 4 SControl 300)
[    4.458580] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.458640] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.458910] ata1.00: ATA-10: WDC WD20PURZ-85AKKY0, 80.00A80, max UDMA/133
[    4.459352] ata2.00: ATA-9: WDC WD20PURZ-85GU6Y0, 80.00A80, max UDMA/133
[    4.459602] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.459769] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.460709] ata2.00: configured for UDMA/133
[    4.460813] ata1.00: configured for UDMA/133
[    4.461195] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20PURZ-85A 0A80 PQ: 0 ANSI: 5
[    4.462123] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    4.462132] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.462149] sd 0:0:0:0: [sda] Write Protect is off
[    4.462155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.462188] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.462361] scsi 1:0:0:0: Direct-Access     ATA      WDC WD20PURZ-85G 0A80 PQ: 0 ANSI: 5
[    4.463369] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    4.463378] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    4.463446] sd 1:0:0:0: [sdb] Write Protect is off
[    4.463455] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.463620] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.464666] ata5.00: ATA-9: TS256GSSD360S, R0123A0, max UDMA/133
[    4.468350] ata5.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    4.480148] ata5.00: Features: Dev-Sleep
[    4.507168] ata5.00: configured for UDMA/133
[    4.507466] scsi 4:0:0:0: Direct-Access     ATA      TS256GSSD360S    3A0  PQ: 0 ANSI: 5
[    4.508505] sd 4:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    4.508541] sd 4:0:0:0: [sdc] Write Protect is off
[    4.508550] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    4.508652] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.527962]  sdc: sdc1 sdc2 sdc3
[    4.534429]  sdb: sdb1
[    4.545276] sd 4:0:0:0: [sdc] Attached SCSI disk
[    4.554897] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.573030]  sda: sda1
[    4.591489] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.595625] Freeing unused decrypted memory: 2036K
[    4.596465] Freeing unused kernel image (initmem) memory: 1868K
[    4.607965] Write protecting the kernel read-only data: 28672k
[    4.609373] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    4.609979] Freeing unused kernel image (rodata/data gap) memory: 1276K
[    4.621065] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.621067] rodata_test: all tests were successful
[    4.621070] Run /init as init process
[    4.621070]   with arguments:
[    4.621071]     /init
[    4.621071]   with environment:
[    4.621072]     HOME=/
[    4.621072]     TERM=linux
[    4.621073]     BOOT_IMAGE=/boot/vmlinuz-linux
[    4.665774] device-mapper: uevent: version 1.0.3
[    4.665811] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com
[    4.714721] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.714726] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    4.715814] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    4.716006] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.716008] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.716009] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.716030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    4.716032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.716033] usb usb1: Product: xHCI Host Controller
[    4.716034] usb usb1: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.716035] usb usb1: SerialNumber: 0000:00:14.0
[    4.716093] hub 1-0:1.0: USB hub found
[    4.716109] hub 1-0:1.0: 16 ports detected
[    4.717591] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    4.717593] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.717594] usb usb2: Product: xHCI Host Controller
[    4.717595] usb usb2: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.717596] usb usb2: SerialNumber: 0000:00:14.0
[    4.717746] hub 2-0:1.0: USB hub found
[    4.717844] hub 2-0:1.0: 10 ports detected
[    4.718937] xhci_hcd 0000:01:00.2: xHCI Host Controller
[    4.718940] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 3
[    4.719411] nvme nvme0: pci function 0000:09:00.0
[    4.719550] xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    4.719749] xhci_hcd 0000:01:00.2: xHCI Host Controller
[    4.719750] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
[    4.719752] xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    4.719776] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    4.719777] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.719778] usb usb3: Product: xHCI Host Controller
[    4.719779] usb usb3: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.719780] usb usb3: SerialNumber: 0000:01:00.2
[    4.719858] hub 3-0:1.0: USB hub found
[    4.719864] hub 3-0:1.0: 2 ports detected
[    4.719956] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.719967] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    4.719968] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.719969] usb usb4: Product: xHCI Host Controller
[    4.719970] usb usb4: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.719971] usb usb4: SerialNumber: 0000:01:00.2
[    4.720037] hub 4-0:1.0: USB hub found
[    4.720043] hub 4-0:1.0: 4 ports detected
[    4.720248] xhci_hcd 0000:08:00.0: failed to load firmware renesas_usb_fw.mem, fallback to ROM
[    4.720403] xhci_hcd 0000:08:00.0: xHCI Host Controller
[    4.720405] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5
[    4.725793] xhci_hcd 0000:08:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000410
[    4.726158] xhci_hcd 0000:08:00.0: xHCI Host Controller
[    4.726160] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6
[    4.726161] xhci_hcd 0000:08:00.0: Host supports USB 3.0 SuperSpeed
[    4.729399] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    4.729401] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.729402] usb usb5: Product: xHCI Host Controller
[    4.729403] usb usb5: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.729403] usb usb5: SerialNumber: 0000:08:00.0
[    4.729474] hub 5-0:1.0: USB hub found
[    4.729492] hub 5-0:1.0: 4 ports detected
[    4.729593] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.729602] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    4.729604] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.729605] usb usb6: Product: xHCI Host Controller
[    4.729605] usb usb6: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.729606] usb usb6: SerialNumber: 0000:08:00.0
[    4.729686] hub 6-0:1.0: USB hub found
[    4.729704] hub 6-0:1.0: 4 ports detected
[    4.737036] nvme nvme0: allocated 32 MiB host memory buffer.
[    4.739149] nvme nvme0: 8/0/0 default/read/poll queues
[    4.743249]  nvme0n1: p1
[    4.967998] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    4.981324] usb 5-4: new high-speed USB device number 2 using xhci_hcd
[    4.998614] block device autoloading is deprecated and will be removed.
[    5.044489] md/raid1:md127: active with 2 out of 2 mirrors
[    5.097014] md127: detected capacity change from 0 to 3906762880
[    5.117630] usb 1-5: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[    5.117643] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.117649] usb 1-5: Product: USB Receiver
[    5.117653] usb 1-5: Manufacturer: Logitech
[    5.128547] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C534.0001/input/input3
[    5.129829] usb 5-4: New USB device found, idVendor=214b, idProduct=7000, bcdDevice= 1.00
[    5.129831] usb 5-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.129832] usb 5-4: Product: USB2.0 HUB
[    5.134315] hub 5-4:1.0: USB hub found
[    5.134871] hub 5-4:1.0: 4 ports detected
[    5.185162] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
[    5.188188] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/input/input4
[    5.188467] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/input/input5
[    5.241332] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    5.244872] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/input/input6
[    5.245502] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
[    5.245582] usbcore: registered new interface driver usbhid
[    5.245586] usbhid: USB HID core driver
[    5.386682] usb 1-6: New USB device found, idVendor=0951, idProduct=16dd, bcdDevice=21.11
[    5.386693] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.386700] usb 1-6: Product: HyperX Alloy Core RGB
[    5.386704] usb 1-6: Manufacturer: Kingston
[    5.389622] input: Kingston HyperX Alloy Core RGB as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:0951:16DD.0003/input/input9
[    5.399402] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
[    5.455202] hid-generic 0003:0951:16DD.0003: input,hidraw2: USB HID v1.11 Keyboard [Kingston HyperX Alloy Core RGB] on usb-0000:00:14.0-6/input0
[    5.458444] input: Kingston HyperX Alloy Core RGB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:0951:16DD.0004/input/input10
[    5.471642] input: Kingston HyperX Alloy Core RGB System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:0951:16DD.0004/input/input11
[    5.561603] input: Kingston HyperX Alloy Core RGB Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:0951:16DD.0004/input/input12
[    5.595012] input: Kingston HyperX Alloy Core RGB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:0951:16DD.0004/input/input13
[    5.595391] hid-generic 0003:0951:16DD.0004: input,hidraw1: USB HID v1.11 Mouse [Kingston HyperX Alloy Core RGB] on usb-0000:00:14.0-6/input1
[    5.595905] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
[    5.652125] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
[    5.652782] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/0003:046D:4054.0005/input/input14
[    5.653054] hid-generic 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:14.0-5/input1:2
[    5.721337] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[    5.730329] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/0003:046D:4054.0005/input/input18
[    5.730656] logitech-hidpp-device 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-5/input1:2
[    5.869150] usb 1-7: New USB device found, idVendor=13fe, idProduct=4200, bcdDevice= 1.10
[    5.869162] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.869169] usb 1-7: Product: USB DISK 2.0
[    5.869173] usb 1-7: Manufacturer:         
[    5.869176] usb 1-7: SerialNumber: 070C5987E013FB37
[    5.879467] usb-storage 1-7:1.0: USB Mass Storage device detected
[    5.879822] scsi host6: usb-storage 1-7:1.0
[    5.879872] usbcore: registered new interface driver usb-storage
[    5.893306] PM: Image not found (code -22)
[    5.944790] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Quota mode: none.
[    6.212719] systemd[1]: systemd 251.3-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    6.212723] systemd[1]: Detected architecture x86-64.
[    6.216250] systemd[1]: Hostname set to <dimich>.
[    6.402086] systemd[1]: Queued start job for default target Graphical Interface.
[    6.422317] systemd[1]: Created slice Slice /system/getty.
[    6.423066] systemd[1]: Created slice Slice /system/modprobe.
[    6.423772] systemd[1]: Created slice Slice /system/netctl.
[    6.424475] systemd[1]: Created slice Slice /system/systemd-fsck.
[    6.425142] systemd[1]: Created slice User and Session Slice.
[    6.425683] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.426241] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.426838] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.427375] systemd[1]: Reached target Local Encrypted Volumes.
[    6.427900] systemd[1]: Reached target Local Integrity Protected Volumes.
[    6.428435] systemd[1]: Reached target Path Units.
[    6.428959] systemd[1]: Reached target Remote File Systems.
[    6.429477] systemd[1]: Reached target Slice Units.
[    6.429999] systemd[1]: Reached target Swaps.
[    6.430512] systemd[1]: Reached target Local Verity Protected Volumes.
[    6.431061] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.432136] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.433793] systemd[1]: Listening on Process Core Dump Socket.
[    6.434704] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.435290] systemd[1]: Listening on Journal Socket.
[    6.436902] systemd[1]: Listening on udev Control Socket.
[    6.437460] systemd[1]: Listening on udev Kernel Socket.
[    6.438510] systemd[1]: Mounting Huge Pages File System...
[    6.439517] systemd[1]: Mounting POSIX Message Queue File System...
[    6.440528] systemd[1]: Mounting Kernel Debug File System...
[    6.441514] systemd[1]: Mounting Kernel Trace File System...
[    6.442612] systemd[1]: Starting Create List of Static Device Nodes...
[    6.443622] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.444642] systemd[1]: Starting Load Kernel Module configfs...
[    6.445623] systemd[1]: Starting Load Kernel Module drm...
[    6.446604] systemd[1]: Starting Load Kernel Module fuse...
[    6.447172] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[    6.448054] systemd[1]: Starting Journal Service...
[    6.451409] systemd[1]: Starting Load Kernel Modules...
[    6.452430] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.452991] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[    6.453516] systemd[1]: Starting Coldplug All udev Devices...
[    6.454878] systemd[1]: Mounted Huge Pages File System.
[    6.455447] systemd[1]: Mounted POSIX Message Queue File System.
[    6.456014] systemd[1]: Mounted Kernel Debug File System.
[    6.456599] systemd[1]: Mounted Kernel Trace File System.
[    6.457243] systemd[1]: Finished Create List of Static Device Nodes.
[    6.458067] EXT4-fs (sdc2): re-mounted. Quota mode: none.
[    6.461208] fuse: init (API version 7.36)
[    6.461952] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    6.462028] systemd[1]: Finished Load Kernel Module configfs.
[    6.462674] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    6.462736] systemd[1]: Finished Load Kernel Module drm.
[    6.463340] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    6.463398] systemd[1]: Finished Load Kernel Module fuse.
[    6.464023] systemd[1]: Finished Remount Root and Kernel File Systems.
[    6.465160] systemd[1]: Mounting FUSE Control File System...
[    6.466096] systemd[1]: Mounting Kernel Configuration File System...
[    6.466628] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
[    6.472682] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[    6.473159] systemd[1]: Starting Load/Save Random Seed...
[    6.473716] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[    6.474160] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.475111] systemd[1]: Mounted FUSE Control File System.
[    6.475676] systemd[1]: Mounted Kernel Configuration File System.
[    6.478703] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.478781] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    6.478803] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    6.485706] systemd[1]: Started Journal Service.
[    6.494668] systemd-journald[280]: Received client request to flush runtime journal.
[    6.509400] ppdev: user-space parallel port driver
[    6.513645] i2c_dev: i2c /dev entries driver
[    6.545322] usbcore: registered new interface driver pl2303
[    6.545349] usbserial: USB Serial support registered for pl2303
[    6.561955] usbcore: registered new interface driver cp210x
[    6.561972] usbserial: USB Serial support registered for cp210x
[    6.578070] loop: module loaded
[    6.600210] FS-Cache: Loaded
[    6.604087] Key type dns_resolver registered
[    6.653335] Key type cifs.spnego registered
[    6.653343] Key type cifs.idmap registered
[    6.760470] Key type encrypted registered
[    6.820489] 8139too: 8139too Fast Ethernet driver 0.9.28
[    6.840395] tun: Universal TUN/TAP device driver, 1.6
[    6.856098] EDAC ie31200: No ECC support
[    6.856124] EDAC ie31200: No ECC support
[    6.865060] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    6.865167] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    6.866216] mei_me 0000:00:16.0: enabling device (0004 -> 0006)
[    6.890445] scsi 6:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 6
[    6.890585] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    6.890852] sd 6:0:0:0: [sdd] 120938496 512-byte logical blocks: (61.9 GB/57.7 GiB)
[    6.891079] sd 6:0:0:0: [sdd] Write Protect is off
[    6.891080] sd 6:0:0:0: [sdd] Mode Sense: 45 00 00 00
[    6.891311] sd 6:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    6.893854]  sdd: sdd1
[    6.895126] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[    6.978517] xt_geoip: loading out-of-tree module taints kernel.
[    7.027987] xt_geoip: module verification failed: signature and/or required key missing - tainting kernel
[    7.072867] snd_hda_intel 0000:01:00.1: Disabling MSI
[    7.072870] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    7.098441] parport0: PC-style at 0x3100, irq 19 [PCSPP,TRISTATE]
[    7.171480] r8169 0000:03:00.0 eth0: RTL8168e/8111e, 10:fe:ed:05:fe:1a, XID 2c2, IRQ 152
[    7.171483] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    7.174030] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    7.174150] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    7.174545] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    7.174548] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.174549] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.174550] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.174551] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    7.174551] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.174552] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    7.174553] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    7.174554] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    7.175202] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[    7.175241] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[    7.175261] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[    7.175280] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[    7.175300] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[    7.175320] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[    7.175630] i2c i2c-0: 4/4 memory slots populated (from DMI)
[    7.176133] i2c i2c-0: Successfully instantiated SPD at 0x50
[    7.176632] i2c i2c-0: Successfully instantiated SPD at 0x51
[    7.177109] i2c i2c-0: Successfully instantiated SPD at 0x52
[    7.177622] i2c i2c-0: Successfully instantiated SPD at 0x53
[    7.181350] 0000:07:00.0: ttyS4 at I/O 0x30c0 (irq = 19, base_baud = 115200) is a XR16850
[    7.182586] 0000:07:00.0: ttyS5 at I/O 0x30c8 (irq = 19, base_baud = 115200) is a XR16850
[    7.189486] r8169 0000:04:00.0 eth1: RTL8168h/8111h, f0:b4:d2:2c:7b:0c, XID 541, IRQ 153
[    7.189490] r8169 0000:04:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    7.202642] r8169 0000:06:00.0 eth2: RTL8168h/8111h, 18:c0:4d:33:b3:fb, XID 541, IRQ 154
[    7.202646] r8169 0000:06:00.0 eth2: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    7.238263] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    7.238295] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[    7.238318] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[    7.238341] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[    7.238362] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[    7.271631] usbcore: registered new interface driver uas
[    7.271800] mousedev: PS/2 mouse device common for all mice
[    7.284207] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
[    7.284209] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    7.284209] RAPL PMU: hw unit of domain package 2^-14 Joules
[    7.286945] cryptd: max_cpu_qlen set to 1000
[    7.294412] AVX2 version of gcm_enc/dec engaged.
[    7.294434] AES CTR mode by8 optimization enabled
[    7.405261] EXT4-fs (md127): mounted filesystem with ordered data mode. Quota mode: none.
[    7.423606] r8169 0000:03:00.0 lan0: renamed from eth0
[    7.478151] iTCO_vendor_support: vendor-support=0
[    7.489163] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    7.489266] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.493596] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    7.493608] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    7.493615] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[    7.493621] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[    7.500260] r8169 0000:06:00.0 wan0: renamed from eth2
[    7.524834] r8169 0000:04:00.0 lan1: renamed from eth1
[    7.648398] nvidia: module license 'NVIDIA' taints kernel.
[    7.648401] Disabling lock debugging due to kernel taint
[    7.658849] spi-nor spi0.0: mx25l12805d (16384 Kbytes)
[    7.660376] Creating 1 MTD partitions on "0000:00:1f.5":
[    7.660378] 0x000000000000-0x000001000000 : "BIOS"
[    7.687724] intel_tcc_cooling: Programmable TCC Offset detected
[    7.768147] nvidia-nvlink: Nvlink Core is being initialized, major device number 511

[    7.768991] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    7.813705] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  515.57  Wed Jun 22 22:44:07 UTC 2022
[    7.849073] intel_rapl_common: Found RAPL domain package
[    7.849075] intel_rapl_common: Found RAPL domain core
[    7.856827] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  515.57  Wed Jun 22 22:31:08 UTC 2022
[    7.918258] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[    7.918963] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    7.918965] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[    7.926902] nvidia-uvm: Loaded the UVM driver, major device number 509.
[    7.990781] usbcore: registered new device driver usbip-host
[    7.996858] mc: Linux media interface: v0.10
[    8.057423] videodev: Linux video capture interface: v2.00
[    8.163331] usbcore: registered new interface driver uvcvideo
[    8.169460] vboxdrv: Found 8 processor cores
[    8.191902] vboxdrv: TSC mode is Invariant, tentative frequency 2999957344 Hz
[    8.191909] vboxdrv: Successfully loaded version 6.1.36 r152435 (interface 0x00320000)
[    8.218796] VBoxNetAdp: Successfully started.
[    8.220712] VBoxNetFlt: Successfully started.
[    8.620086] RTL8211DN Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[    8.912438] r8169 0000:03:00.0 lan0: Link is Down
[    8.996778] 8021q: 802.1Q VLAN Support v1.8
[    9.035352] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.035589] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   10.445999] r8169 0000:03:00.0 lan0: Link is Up - 100Mbps/Full - flow control rx/tx
[   10.446027] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready

No new messages after `startx`

Kernel log with `nvidia_drm modeset=1`:

[    0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-16
[    0.000000] Linux version 5.18.14-arch1-1 (linux@archlinux) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT_DYNAMIC Sat, 23 Jul 2022 11:46:17 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ca49664d-30d4-4d05-8855-ed88f7aea367 rw audit=0 resume=LABEL=SWAP systemd.unified_cgroup_hierarchy=true lsm=landlock,lockdown,yama,apparmor,bpf pcie_aspm=off nomodeset
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000025a4ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000025a50000-0x0000000025a50fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000025a51000-0x0000000025a51fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000025a52000-0x000000002ea06fff] usable
[    0.000000] BIOS-e820: [mem 0x000000002ea07000-0x000000002ee6efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000002ee6f000-0x000000002efddfff] usable
[    0.000000] BIOS-e820: [mem 0x000000002efde000-0x000000002f3a6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000002f3a7000-0x000000002fffefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000002ffff000-0x000000002fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000030000000-0x0000000038ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000020c4ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. Z390 D/Z390 D, BIOS F2 10/15/2019
[    0.000000] tsc: Detected 3000.000 MHz processor
[    0.000450] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000452] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000458] last_pfn = 0x20c5000 max_arch_pfn = 0x400000000
[    0.000538] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001025] last_pfn = 0x30000 max_arch_pfn = 0x400000000
[    0.006032] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f]
[    0.006043] Using GB pages for direct mapping
[    0.006511] RAMDISK: [mem 0x2cc05000-0x2dee5fff]
[    0.006515] ACPI: Early table checksum verification disabled
[    0.006517] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.006520] ACPI: XSDT 0x000000002F2FB0A8 0000CC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006524] ACPI: FACP 0x000000002F33BD88 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.006527] ACPI: DSDT 0x000000002F2FB208 040B80 (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.006529] ACPI: FACS 0x000000002F3A6080 000040
[    0.006531] ACPI: APIC 0x000000002F33BEA0 0000BC (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.006533] ACPI: FPDT 0x000000002F33BF60 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006535] ACPI: FIDT 0x000000002F33BFA8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006537] ACPI: MCFG 0x000000002F33C048 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.006539] ACPI: SSDT 0x000000002F33C088 000204 (v01 ALASKA A M I    00001000 INTL 20160527)
[    0.006541] ACPI: SSDT 0x000000002F33C290 0017D5 (v02 ALASKA A M I    00003000 INTL 20160527)
[    0.006543] ACPI: SSDT 0x000000002F33DA68 008602 (v01 ALASKA A M I    00000001 INTL 20160527)
[    0.006545] ACPI: SSDT 0x000000002F346070 0031C7 (v02 ALASKA A M I    00003000 INTL 20160527)
[    0.006547] ACPI: SSDT 0x000000002F349238 002358 (v02 ALASKA A M I    00001000 INTL 20160527)
[    0.006549] ACPI: HPET 0x000000002F34B590 000038 (v01 ALASKA A M I    00000002      01000013)
[    0.006551] ACPI: SSDT 0x000000002F34B5C8 000F9E (v02 ALASKA A M I    00001000 INTL 20160527)
[    0.006553] ACPI: SSDT 0x000000002F34C568 002D1B (v02 ALASKA A M I    00000000 INTL 20160527)
[    0.006555] ACPI: UEFI 0x000000002F34F288 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.006556] ACPI: LPIT 0x000000002F34F2D0 00005C (v01 ALASKA A M I    00000002      01000013)
[    0.006558] ACPI: SSDT 0x000000002F34F330 0027DE (v02 ALASKA A M I    00001000 INTL 20160527)
[    0.006560] ACPI: SSDT 0x000000002F351B10 000FFE (v02 ALASKA A M I    00000000 INTL 20160527)
[    0.006562] ACPI: DBGP 0x000000002F352B10 000034 (v01 ALASKA A M I    00000002      01000013)
[    0.006564] ACPI: DBG2 0x000000002F352B48 000054 (v00 ALASKA A M I    00000002      01000013)
[    0.006566] ACPI: DMAR 0x000000002F352BA0 000070 (v01 ALASKA A M I    00000002      01000013)
[    0.006568] ACPI: WSMT 0x000000002F352C10 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006569] ACPI: Reserving FACP table memory at [mem 0x2f33bd88-0x2f33be9b]
[    0.006571] ACPI: Reserving DSDT table memory at [mem 0x2f2fb208-0x2f33bd87]
[    0.006571] ACPI: Reserving FACS table memory at [mem 0x2f3a6080-0x2f3a60bf]
[    0.006572] ACPI: Reserving APIC table memory at [mem 0x2f33bea0-0x2f33bf5b]
[    0.006572] ACPI: Reserving FPDT table memory at [mem 0x2f33bf60-0x2f33bfa3]
[    0.006573] ACPI: Reserving FIDT table memory at [mem 0x2f33bfa8-0x2f33c043]
[    0.006574] ACPI: Reserving MCFG table memory at [mem 0x2f33c048-0x2f33c083]
[    0.006574] ACPI: Reserving SSDT table memory at [mem 0x2f33c088-0x2f33c28b]
[    0.006575] ACPI: Reserving SSDT table memory at [mem 0x2f33c290-0x2f33da64]
[    0.006576] ACPI: Reserving SSDT table memory at [mem 0x2f33da68-0x2f346069]
[    0.006576] ACPI: Reserving SSDT table memory at [mem 0x2f346070-0x2f349236]
[    0.006577] ACPI: Reserving SSDT table memory at [mem 0x2f349238-0x2f34b58f]
[    0.006577] ACPI: Reserving HPET table memory at [mem 0x2f34b590-0x2f34b5c7]
[    0.006578] ACPI: Reserving SSDT table memory at [mem 0x2f34b5c8-0x2f34c565]
[    0.006579] ACPI: Reserving SSDT table memory at [mem 0x2f34c568-0x2f34f282]
[    0.006579] ACPI: Reserving UEFI table memory at [mem 0x2f34f288-0x2f34f2c9]
[    0.006580] ACPI: Reserving LPIT table memory at [mem 0x2f34f2d0-0x2f34f32b]
[    0.006581] ACPI: Reserving SSDT table memory at [mem 0x2f34f330-0x2f351b0d]
[    0.006581] ACPI: Reserving SSDT table memory at [mem 0x2f351b10-0x2f352b0d]
[    0.006582] ACPI: Reserving DBGP table memory at [mem 0x2f352b10-0x2f352b43]
[    0.006583] ACPI: Reserving DBG2 table memory at [mem 0x2f352b48-0x2f352b9b]
[    0.006583] ACPI: Reserving DMAR table memory at [mem 0x2f352ba0-0x2f352c0f]
[    0.006584] ACPI: Reserving WSMT table memory at [mem 0x2f352c10-0x2f352c37]
[    0.006829] No NUMA configuration found
[    0.006830] Faking a node at [mem 0x0000000000000000-0x00000020c4ffffff]
[    0.006832] NODE_DATA(0) allocated [mem 0x20c4ffc000-0x20c4ffffff]
[    0.006926] Zone ranges:
[    0.006926]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006928]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006929]   Normal   [mem 0x0000000100000000-0x00000020c4ffffff]
[    0.006930]   Device   empty
[    0.006930] Movable zone start for each node
[    0.006931] Early memory node ranges
[    0.006931]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.006932]   node   0: [mem 0x0000000000100000-0x0000000025a4ffff]
[    0.006933]   node   0: [mem 0x0000000025a52000-0x000000002ea06fff]
[    0.006934]   node   0: [mem 0x000000002ee6f000-0x000000002efddfff]
[    0.006934]   node   0: [mem 0x000000002ffff000-0x000000002fffffff]
[    0.006935]   node   0: [mem 0x0000000100000000-0x00000020c4ffffff]
[    0.006944] Initmem setup node 0 [mem 0x0000000000001000-0x00000020c4ffffff]
[    0.006947] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.006963] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.007664] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.007676] On node 0, zone DMA32: 1128 pages in unavailable ranges
[    0.007711] On node 0, zone DMA32: 4129 pages in unavailable ranges
[    0.167429] On node 0, zone Normal: 12288 pages in unavailable ranges
[    0.167992] ACPI: PM-Timer IO Port: 0x1808
[    0.167997] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.167998] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.167998] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.167999] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.168000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.168000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.168001] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.168001] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.168064] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.168066] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.168067] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.168069] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.168070] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.168072] TSC deadline timer available
[    0.168073] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.168085] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.168086] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.168087] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.168088] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.168088] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.168089] PM: hibernation: Registered nosave memory: [mem 0x25a50000-0x25a50fff]
[    0.168090] PM: hibernation: Registered nosave memory: [mem 0x25a51000-0x25a51fff]
[    0.168091] PM: hibernation: Registered nosave memory: [mem 0x2ea07000-0x2ee6efff]
[    0.168092] PM: hibernation: Registered nosave memory: [mem 0x2efde000-0x2f3a6fff]
[    0.168093] PM: hibernation: Registered nosave memory: [mem 0x2f3a7000-0x2fffefff]
[    0.168094] PM: hibernation: Registered nosave memory: [mem 0x30000000-0x38ffffff]
[    0.168094] PM: hibernation: Registered nosave memory: [mem 0x39000000-0xdfffffff]
[    0.168095] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.168095] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.168096] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.168097] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.168097] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.168098] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.168098] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.168099] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.168099] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.168100] [mem 0x39000000-0xdfffffff] available for PCI devices
[    0.168101] Booting paravirtualized kernel on bare hardware
[    0.168103] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.171486] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.171602] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[    0.171607] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[    0.171608] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.171623] Fallback order for Node 0: 0 
[    0.171625] Built 1 zonelists, mobility grouping on.  Total pages: 32980359
[    0.171626] Policy zone: Normal
[    0.171627] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ca49664d-30d4-4d05-8855-ed88f7aea367 rw audit=0 resume=LABEL=SWAP systemd.unified_cgroup_hierarchy=true lsm=landlock,lockdown,yama,apparmor,bpf pcie_aspm=off nomodeset
[    0.171654] audit: disabled (until reboot)
[    0.171687] PCIe ASPM is disabled
[    0.171697] Booted with the nomodeset parameter. Only the system framebuffer will be available
[    0.171699] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[    0.173645] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[    0.174611] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.174726] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.384597] Memory: 131690916K/134016068K available (14343K kernel code, 2099K rwdata, 11012K rodata, 1868K init, 3852K bss, 2324892K reserved, 0K cma-reserved)
[    0.385224] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.385248] ftrace: allocating 44939 entries in 176 pages
[    0.390570] ftrace: allocated 176 pages with 3 groups
[    0.390627] Dynamic Preempt: full
[    0.390682] rcu: Preemptible hierarchical RCU implementation.
[    0.390683] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.390683] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.390684] 	Trampoline variant of Tasks RCU enabled.
[    0.390685] 	Rude variant of Tasks RCU enabled.
[    0.390685] 	Tracing variant of Tasks RCU enabled.
[    0.390686] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.390686] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.394116] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.394662] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.394679] random: crng init done
[    0.400827] Console: colour VGA+ 80x25
[    0.400836] printk: console [tty0] enabled
[    0.400849] ACPI: Core revision 20211217
[    0.401243] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.401385] APIC: Switch to symmetric I/O mode setup
[    0.401387] DMAR: Host address width 39
[    0.401388] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.401391] DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.401393] DMAR: RMRR base: 0x0000002f98e000 end: 0x0000002fbd7fff
[    0.401395] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 0
[    0.401396] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.401396] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.404386] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.404387] x2apic enabled
[    0.404419] Switched APIC routing to cluster x2apic.
[    0.413870] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.428004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3e459bf4c, max_idle_ns: 440795289890 ns
[    0.428007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.00 BogoMIPS (lpj=10000000)
[    0.428009] pid_max: default: 32768 minimum: 301
[    0.428026] LSM: Security Framework initializing
[    0.428032] landlock: Up and running.
[    0.428033] Yama: becoming mindful.
[    0.428046] AppArmor: AppArmor initialized
[    0.428049] LSM support for eBPF active
[    0.428136] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.428215] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.428358] CPU0: Thermal monitoring enabled (TM1)
[    0.428400] process: using mwait in idle threads
[    0.428402] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.428403] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.428406] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.428408] Spectre V2 : Mitigation: Enhanced IBRS
[    0.428408] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.428409] RETBleed: Mitigation: Enhanced IBRS
[    0.428410] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.428411] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.428413] TAA: Mitigation: TSX disabled
[    0.428414] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.428415] SRBDS: Mitigation: Microcode
[    0.433621] Freeing SMP alternatives memory: 36K
[    0.434715] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1570
[    0.434740] smpboot: CPU0: Intel(R) Core(TM) i7-9700F CPU @ 3.00GHz (family: 0x6, model: 0x9e, stepping: 0xd)
[    0.434823] cblist_init_generic: Setting adjustable number of callback queues.
[    0.434824] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.434834] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.434843] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.434850] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.434864] ... version:                4
[    0.434864] ... bit width:              48
[    0.434864] ... generic registers:      8
[    0.434865] ... value mask:             0000ffffffffffff
[    0.434866] ... max period:             00007fffffffffff
[    0.434866] ... fixed-purpose events:   3
[    0.434866] ... event mask:             00000007000000ff
[    0.434924] rcu: Hierarchical SRCU implementation.
[    0.435373] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.435419] smp: Bringing up secondary CPUs ...
[    0.435471] x86: Booting SMP configuration:
[    0.435472] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.441884] smp: Brought up 1 node, 8 CPUs
[    0.441884] smpboot: Max logical packages: 1
[    0.441884] smpboot: Total of 8 processors activated (48019.00 BogoMIPS)
[    0.446145] devtmpfs: initialized
[    0.446145] x86/mm: Memory block size: 2048MB
[    0.446145] ACPI: PM: Registering ACPI NVS region [mem 0x25a50000-0x25a50fff] (4096 bytes)
[    0.446145] ACPI: PM: Registering ACPI NVS region [mem 0x2efde000-0x2f3a6fff] (3969024 bytes)
[    0.446145] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.446145] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.446145] pinctrl core: initialized pinctrl subsystem
[    0.446145] PM: RTC time: 07:26:37, date: 2022-07-25
[    0.446145] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.446145] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.446145] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.446145] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.446145] thermal_sys: Registered thermal governor 'fair_share'
[    0.446145] thermal_sys: Registered thermal governor 'bang_bang'
[    0.446145] thermal_sys: Registered thermal governor 'step_wise'
[    0.446145] thermal_sys: Registered thermal governor 'user_space'
[    0.446145] thermal_sys: Registered thermal governor 'power_allocator'
[    0.446145] cpuidle: using governor ladder
[    0.446145] cpuidle: using governor menu
[    0.446145] HugeTLB: can free 4095 vmemmap pages for hugepages-1048576kB
[    0.446145] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.446145] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.446145] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.446145] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.446145] PCI: Using configuration type 1 for base access
[    0.448759] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.448762] HugeTLB: can free 7 vmemmap pages for hugepages-2048kB
[    0.448762] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.448762] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.448762] ACPI: Added _OSI(Module Device)
[    0.448762] ACPI: Added _OSI(Processor Device)
[    0.448762] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.448762] ACPI: Added _OSI(Processor Aggregator Device)
[    0.448762] ACPI: Added _OSI(Linux-Dell-Video)
[    0.448762] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.448762] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.506097] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    1.067735] ACPI: Dynamic OEM Table Load:
[    1.067740] ACPI: SSDT 0xFFFF8885011C5000 0006C6 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    1.068589] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    1.069867] ACPI: Dynamic OEM Table Load:
[    1.069871] ACPI: SSDT 0xFFFF8885011B5800 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    1.070961] ACPI: Dynamic OEM Table Load:
[    1.070965] ACPI: SSDT 0xFFFF888500128000 000EF1 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    1.072333] ACPI: Dynamic OEM Table Load:
[    1.072336] ACPI: SSDT 0xFFFF8885011B2000 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    1.073116] ACPI: Dynamic OEM Table Load:
[    1.073119] ACPI: SSDT 0xFFFF8885011B2C00 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    1.077128] ACPI: Interpreter enabled
[    1.077158] ACPI: PM: (supports S0 S3 S4 S5)
[    1.077159] ACPI: Using IOAPIC for interrupt routing
[    1.077185] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.078185] ACPI: Enabled 7 GPEs in block 00 to 7F
[    1.089573] ACPI: PM: Power Resource [USBC]
[    1.091747] ACPI: PM: Power Resource [V0PR]
[    1.091910] ACPI: PM: Power Resource [V1PR]
[    1.092068] ACPI: PM: Power Resource [V2PR]
[    1.096525] ACPI: PM: Power Resource [WRST]
[    1.098375] ACPI: PM: Power Resource [FN00]
[    1.098427] ACPI: PM: Power Resource [FN01]
[    1.098478] ACPI: PM: Power Resource [FN02]
[    1.098529] ACPI: PM: Power Resource [FN03]
[    1.098580] ACPI: PM: Power Resource [FN04]
[    1.098934] ACPI: PM: Power Resource [PIN]
[    1.099468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.099473] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI EDR HPX-Type3]
[    1.099474] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    1.099552] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    1.100370] PCI host bridge to bus 0000:00
[    1.100371] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.100372] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.100373] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.100374] pci_bus 0000:00: root bus resource [mem 0x39000000-0xdfffffff window]
[    1.100375] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    1.100376] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    1.100377] pci_bus 0000:00: root bus resource [bus 00-fe]
[    1.100445] pci 0000:00:00.0: [8086:3e30] type 00 class 0x060000
[    1.100487] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    1.100514] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.101161] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[    1.101195] pci 0000:00:12.0: reg 0x10: [mem 0x4000219000-0x4000219fff 64bit]
[    1.101444] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    1.101478] pci 0000:00:14.0: reg 0x10: [mem 0x4000200000-0x400020ffff 64bit]
[    1.101607] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.102058] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    1.102089] pci 0000:00:14.2: reg 0x10: [mem 0x4000214000-0x4000215fff 64bit]
[    1.102111] pci 0000:00:14.2: reg 0x18: [mem 0x4000218000-0x4000218fff 64bit]
[    1.102298] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    1.102328] pci 0000:00:16.0: reg 0x10: [mem 0x4000217000-0x4000217fff 64bit]
[    1.102438] pci 0000:00:16.0: PME# supported from D3hot
[    1.102897] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[    1.102922] pci 0000:00:17.0: reg 0x10: [mem 0x3d700000-0x3d701fff]
[    1.102936] pci 0000:00:17.0: reg 0x14: [mem 0x3d703000-0x3d7030ff]
[    1.102950] pci 0000:00:17.0: reg 0x18: [io  0x8050-0x8057]
[    1.102964] pci 0000:00:17.0: reg 0x1c: [io  0x8040-0x8043]
[    1.102978] pci 0000:00:17.0: reg 0x20: [io  0x8020-0x803f]
[    1.102992] pci 0000:00:17.0: reg 0x24: [mem 0x3d702000-0x3d7027ff]
[    1.103068] pci 0000:00:17.0: PME# supported from D3hot
[    1.103558] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[    1.103718] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.104319] pci 0000:00:1b.2: [8086:a342] type 01 class 0x060400
[    1.104492] pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
[    1.104528] pci 0000:00:1b.2: PTM enabled (root), 4ns granularity
[    1.105107] pci 0000:00:1b.3: [8086:a343] type 01 class 0x060400
[    1.105281] pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold
[    1.105320] pci 0000:00:1b.3: PTM enabled (root), 4ns granularity
[    1.105934] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
[    1.106094] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.106686] pci 0000:00:1c.2: [8086:a33a] type 01 class 0x060400
[    1.106859] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.106898] pci 0000:00:1c.2: PTM enabled (root), 4ns granularity
[    1.107469] pci 0000:00:1c.3: [8086:a33b] type 01 class 0x060400
[    1.107644] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.107683] pci 0000:00:1c.3: PTM enabled (root), 4ns granularity
[    1.108265] pci 0000:00:1c.4: [8086:a33c] type 01 class 0x060400
[    1.108444] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.108486] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[    1.109090] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[    1.109268] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.109309] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    1.109949] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
[    1.110413] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[    1.110480] pci 0000:00:1f.3: reg 0x10: [mem 0x4000210000-0x4000213fff 64bit]
[    1.110576] pci 0000:00:1f.3: reg 0x20: [mem 0x4000100000-0x40001fffff 64bit]
[    1.110730] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    1.111662] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    1.111754] pci 0000:00:1f.4: reg 0x10: [mem 0x4000216000-0x40002160ff 64bit]
[    1.111848] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    1.112160] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    1.112184] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    1.112342] pci 0000:01:00.0: [10de:21c4] type 00 class 0x030000
[    1.112352] pci 0000:01:00.0: reg 0x10: [mem 0x3c000000-0x3cffffff]
[    1.112360] pci 0000:01:00.0: reg 0x14: [mem 0x40000000-0x4fffffff 64bit pref]
[    1.112369] pci 0000:01:00.0: reg 0x1c: [mem 0x3a000000-0x3bffffff 64bit pref]
[    1.112374] pci 0000:01:00.0: reg 0x24: [io  0x7000-0x707f]
[    1.112380] pci 0000:01:00.0: reg 0x30: [mem 0x3d000000-0x3d07ffff pref]
[    1.112397] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.112429] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.112473] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    1.112515] pci 0000:01:00.1: [10de:1aeb] type 00 class 0x040300
[    1.112525] pci 0000:01:00.1: reg 0x10: [mem 0x3d080000-0x3d083fff]
[    1.112615] pci 0000:01:00.2: [10de:1aec] type 00 class 0x0c0330
[    1.112627] pci 0000:01:00.2: reg 0x10: [mem 0x50000000-0x5003ffff 64bit pref]
[    1.112639] pci 0000:01:00.2: reg 0x1c: [mem 0x50040000-0x5004ffff 64bit pref]
[    1.112681] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
[    1.112715] pci 0000:01:00.3: [10de:1aed] type 00 class 0x0c8000
[    1.112724] pci 0000:01:00.3: reg 0x10: [mem 0x3d084000-0x3d084fff]
[    1.112783] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
[    1.112811] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.112813] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    1.112814] pci 0000:00:01.0:   bridge window [mem 0x3a000000-0x3d0fffff]
[    1.112816] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x500fffff 64bit pref]
[    1.112930] acpiphp: Slot [1] registered
[    1.112941] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    1.113088] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    1.113114] pci 0000:03:00.0: reg 0x10: [io  0x6000-0x60ff]
[    1.113149] pci 0000:03:00.0: reg 0x18: [mem 0x3d600000-0x3d600fff 64bit]
[    1.113170] pci 0000:03:00.0: reg 0x20: [mem 0x4000000000-0x4000003fff 64bit pref]
[    1.113306] pci 0000:03:00.0: supports D1 D2
[    1.113307] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.113430] pci 0000:00:1b.2: PCI bridge to [bus 03]
[    1.113438] pci 0000:00:1b.2:   bridge window [io  0x6000-0x6fff]
[    1.113443] pci 0000:00:1b.2:   bridge window [mem 0x3d600000-0x3d6fffff]
[    1.113451] pci 0000:00:1b.2:   bridge window [mem 0x4000000000-0x40000fffff 64bit pref]
[    1.113582] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    1.113608] pci 0000:04:00.0: reg 0x10: [io  0x5000-0x50ff]
[    1.113643] pci 0000:04:00.0: reg 0x18: [mem 0x3d504000-0x3d504fff 64bit]
[    1.113665] pci 0000:04:00.0: reg 0x20: [mem 0x3d500000-0x3d503fff 64bit]
[    1.113812] pci 0000:04:00.0: supports D1 D2
[    1.113813] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.113961] pci 0000:00:1b.3: PCI bridge to [bus 04]
[    1.113969] pci 0000:00:1b.3:   bridge window [io  0x5000-0x5fff]
[    1.113974] pci 0000:00:1b.3:   bridge window [mem 0x3d500000-0x3d5fffff]
[    1.114092] acpiphp: Slot [1-1] registered
[    1.114103] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    1.114253] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[    1.114280] pci 0000:06:00.0: reg 0x10: [io  0x4000-0x40ff]
[    1.114315] pci 0000:06:00.0: reg 0x18: [mem 0x3d404000-0x3d404fff 64bit]
[    1.114336] pci 0000:06:00.0: reg 0x20: [mem 0x3d400000-0x3d403fff 64bit]
[    1.114484] pci 0000:06:00.0: supports D1 D2
[    1.114485] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.114631] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    1.114638] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    1.114643] pci 0000:00:1c.2:   bridge window [mem 0x3d400000-0x3d4fffff]
[    1.114800] pci 0000:07:00.0: [1c00:3250] type 00 class 0x070005
[    1.114845] pci 0000:07:00.0: reg 0x10: [io  0x3000-0x30ff]
[    1.114869] pci 0000:07:00.0: reg 0x14: [mem 0x50200000-0x50207fff pref]
[    1.114893] pci 0000:07:00.0: reg 0x18: [io  0x3100-0x3103]
[    1.114987] pci 0000:07:00.0: reg 0x30: [mem 0x3d300000-0x3d307fff pref]
[    1.115125] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    1.115243] pci 0000:00:1c.3: PCI bridge to [bus 07]
[    1.115251] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    1.115255] pci 0000:00:1c.3:   bridge window [mem 0x3d300000-0x3d3fffff]
[    1.115263] pci 0000:00:1c.3:   bridge window [mem 0x50200000-0x502fffff 64bit pref]
[    1.115471] pci 0000:08:00.0: [1912:0014] type 00 class 0x0c0330
[    1.115536] pci 0000:08:00.0: reg 0x10: [mem 0x3d200000-0x3d201fff 64bit]
[    1.115864] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    1.116009] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    1.116022] pci 0000:00:1c.4:   bridge window [mem 0x3d200000-0x3d2fffff]
[    1.116180] pci 0000:09:00.0: [15b7:501a] type 00 class 0x010802
[    1.116213] pci 0000:09:00.0: reg 0x10: [mem 0x3d100000-0x3d103fff 64bit]
[    1.116261] pci 0000:09:00.0: reg 0x20: [mem 0x3d104000-0x3d1040ff 64bit]
[    1.116528] pci 0000:00:1d.0: PCI bridge to [bus 09]
[    1.116540] pci 0000:00:1d.0:   bridge window [mem 0x3d100000-0x3d1fffff]
[    1.117912] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    1.117940] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    1.117966] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    1.117993] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    1.118020] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    1.118047] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    1.118073] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    1.118099] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    1.122526] iommu: Default domain type: Translated 
[    1.122527] iommu: DMA domain TLB invalidation policy: lazy mode 
[    1.122606] SCSI subsystem initialized
[    1.122611] libata version 3.00 loaded.
[    1.122611] ACPI: bus type USB registered
[    1.122611] usbcore: registered new interface driver usbfs
[    1.122611] usbcore: registered new interface driver hub
[    1.122611] usbcore: registered new device driver usb
[    1.122611] pps_core: LinuxPPS API ver. 1 registered
[    1.122611] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.122611] PTP clock support registered
[    1.122611] EDAC MC: Ver: 3.0.0
[    1.122611] NetLabel: Initializing
[    1.122611] NetLabel:  domain hash size = 128
[    1.122611] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.122611] NetLabel:  unlabeled traffic allowed by default
[    1.122611] mctp: management component transport protocol core
[    1.122611] NET: Registered PF_MCTP protocol family
[    1.122611] PCI: Using ACPI for IRQ routing
[    1.206847] PCI: pci_cache_line_size set to 64 bytes
[    1.207046] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    1.207057] e820: reserve RAM buffer [mem 0x25a50000-0x27ffffff]
[    1.207058] e820: reserve RAM buffer [mem 0x2ea07000-0x2fffffff]
[    1.207059] e820: reserve RAM buffer [mem 0x2efde000-0x2fffffff]
[    1.207059] e820: reserve RAM buffer [mem 0x20c5000000-0x20c7ffffff]
[    1.207067] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    1.207067] pci 0000:01:00.0: vgaarb: bridge control possible
[    1.207067] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.207067] vgaarb: loaded
[    1.207067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.207067] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    1.210080] clocksource: Switched to clocksource tsc-early
[    1.212634] VFS: Disk quotas dquot_6.6.0
[    1.212641] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.212698] AppArmor: AppArmor Filesystem Enabled
[    1.212716] pnp: PnP ACPI init
[    1.212943] system 00:00: [io  0x0a00-0x0a2f] has been reserved
[    1.212944] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    1.212946] system 00:00: [io  0x0a40-0x0a4f] has been reserved
[    1.213600] pnp 00:01: [dma 0 disabled]
[    1.213705] system 00:02: [io  0x0680-0x069f] has been reserved
[    1.213706] system 00:02: [io  0x164e-0x164f] has been reserved
[    1.213786] system 00:04: [io  0x1854-0x1857] has been reserved
[    1.213925] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.213927] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.213928] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.213929] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    1.213930] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.213931] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    1.213932] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.213933] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.214106] system 00:06: [io  0x1800-0x18fe] could not be reserved
[    1.214108] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[    1.214109] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    1.214110] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    1.214111] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    1.214112] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[    1.214113] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    1.214345] system 00:07: [io  0x2000-0x20fe] has been reserved
[    1.215776] pnp: PnP ACPI: found 9 devices
[    1.220872] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.220905] NET: Registered PF_INET protocol family
[    1.220998] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.222127] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    1.222201] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.222362] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    1.222640] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    1.222686] TCP: Hash tables configured (established 524288 bind 65536)
[    1.222791] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[    1.222955] UDP hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.223139] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.223268] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.223272] NET: Registered PF_XDP protocol family
[    1.223282] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.223285] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    1.223287] pci 0000:00:01.0:   bridge window [mem 0x3a000000-0x3d0fffff]
[    1.223289] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x500fffff 64bit pref]
[    1.223291] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    1.223313] pci 0000:00:1b.2: PCI bridge to [bus 03]
[    1.223316] pci 0000:00:1b.2:   bridge window [io  0x6000-0x6fff]
[    1.223322] pci 0000:00:1b.2:   bridge window [mem 0x3d600000-0x3d6fffff]
[    1.223326] pci 0000:00:1b.2:   bridge window [mem 0x4000000000-0x40000fffff 64bit pref]
[    1.223335] pci 0000:00:1b.3: PCI bridge to [bus 04]
[    1.223338] pci 0000:00:1b.3:   bridge window [io  0x5000-0x5fff]
[    1.223344] pci 0000:00:1b.3:   bridge window [mem 0x3d500000-0x3d5fffff]
[    1.223356] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    1.223374] pci 0000:00:1c.2: PCI bridge to [bus 06]
[    1.223376] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    1.223383] pci 0000:00:1c.2:   bridge window [mem 0x3d400000-0x3d4fffff]
[    1.223395] pci 0000:00:1c.3: PCI bridge to [bus 07]
[    1.223397] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    1.223403] pci 0000:00:1c.3:   bridge window [mem 0x3d300000-0x3d3fffff]
[    1.223408] pci 0000:00:1c.3:   bridge window [mem 0x50200000-0x502fffff 64bit pref]
[    1.223416] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    1.223422] pci 0000:00:1c.4:   bridge window [mem 0x3d200000-0x3d2fffff]
[    1.223435] pci 0000:00:1d.0: PCI bridge to [bus 09]
[    1.223441] pci 0000:00:1d.0:   bridge window [mem 0x3d100000-0x3d1fffff]
[    1.223453] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.223454] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.223455] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.223456] pci_bus 0000:00: resource 7 [mem 0x39000000-0xdfffffff window]
[    1.223457] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    1.223458] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[    1.223459] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
[    1.223459] pci_bus 0000:01: resource 1 [mem 0x3a000000-0x3d0fffff]
[    1.223460] pci_bus 0000:01: resource 2 [mem 0x40000000-0x500fffff 64bit pref]
[    1.223461] pci_bus 0000:03: resource 0 [io  0x6000-0x6fff]
[    1.223462] pci_bus 0000:03: resource 1 [mem 0x3d600000-0x3d6fffff]
[    1.223463] pci_bus 0000:03: resource 2 [mem 0x4000000000-0x40000fffff 64bit pref]
[    1.223463] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
[    1.223464] pci_bus 0000:04: resource 1 [mem 0x3d500000-0x3d5fffff]
[    1.223465] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    1.223466] pci_bus 0000:06: resource 1 [mem 0x3d400000-0x3d4fffff]
[    1.223467] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
[    1.223467] pci_bus 0000:07: resource 1 [mem 0x3d300000-0x3d3fffff]
[    1.223468] pci_bus 0000:07: resource 2 [mem 0x50200000-0x502fffff 64bit pref]
[    1.223469] pci_bus 0000:08: resource 1 [mem 0x3d200000-0x3d2fffff]
[    1.223470] pci_bus 0000:09: resource 1 [mem 0x3d100000-0x3d1fffff]
[    1.224663] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    1.224725] pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
[    1.224917] pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
[    1.225225] PCI: CLS 64 bytes, default 64
[    1.225236] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.225237] software IO TLB: mapped [mem 0x0000000028c05000-0x000000002cc05000] (64MB)
[    1.225266] Trying to unpack rootfs image as initramfs...
[    1.225281] sgx: EPC section 0x30200000-0x35f7ffff
[    1.241607] Initialise system trusted keyrings
[    1.241614] Key type blacklist registered
[    1.241631] workingset: timestamp_bits=41 max_order=25 bucket_order=0
[    1.242266] zbud: loaded
[    1.242382] integrity: Platform Keyring initialized
[    1.242383] integrity: Machine keyring initialized
[    1.247339] Key type asymmetric registered
[    1.247340] Asymmetric key parser 'x509' registered
[    2.056447] Freeing initrd memory: 19332K
[    2.057885] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    2.057902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    2.057921] io scheduler mq-deadline registered
[    2.057922] io scheduler kyber registered
[    2.057941] io scheduler bfq registered
[    2.063515] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.063964] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    2.063975] ACPI: button: Sleep Button [SLPB]
[    2.064002] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    2.064009] ACPI: button: Power Button [PWRB]
[    2.064022] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.064736] ACPI: button: Power Button [PWRF]
[    2.244817] tsc: Refined TSC clocksource calibration: 2999.992 MHz
[    2.244821] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e3dd91bf, max_idle_ns: 440795234040 ns
[    2.244865] clocksource: Switched to clocksource tsc
[    4.088355] ACPI: \_TZ_.TZ10: Invalid passive threshold
[    4.088567] thermal LNXTHERM:00: registered as thermal_zone0
[    4.088568] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[    4.088796] thermal LNXTHERM:01: registered as thermal_zone1
[    4.088797] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    4.088940] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.089720] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    4.091817] Non-volatile memory driver v1.3
[    4.091818] Linux agpgart interface v0.103
[    4.091819] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    4.091873] ACPI: bus type drm_connector registered
[    4.093212] ahci 0000:00:17.0: version 3.0
[    4.103546] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x37 impl SATA mode
[    4.103549] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst 
[    4.141792] scsi host0: ahci
[    4.142037] scsi host1: ahci
[    4.142297] scsi host2: ahci
[    4.142457] scsi host3: ahci
[    4.142645] scsi host4: ahci
[    4.142812] scsi host5: ahci
[    4.142837] ata1: SATA max UDMA/133 abar m2048@0x3d702000 port 0x3d702100 irq 130
[    4.142840] ata2: SATA max UDMA/133 abar m2048@0x3d702000 port 0x3d702180 irq 130
[    4.142843] ata3: SATA max UDMA/133 abar m2048@0x3d702000 port 0x3d702200 irq 130
[    4.142843] ata4: DUMMY
[    4.142845] ata5: SATA max UDMA/133 abar m2048@0x3d702000 port 0x3d702300 irq 130
[    4.142848] ata6: SATA max UDMA/133 abar m2048@0x3d702000 port 0x3d702380 irq 130
[    4.142872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.142874] ehci-pci: EHCI PCI platform driver
[    4.142903] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.142904] ohci-pci: OHCI PCI platform driver
[    4.142907] uhci_hcd: USB Universal Host Controller Interface driver
[    4.142926] usbcore: registered new interface driver usbserial_generic
[    4.142928] usbserial: USB Serial support registered for generic
[    4.143142] rtc_cmos 00:03: RTC can wake from S4
[    4.144832] rtc_cmos 00:03: registered as rtc0
[    4.145142] rtc_cmos 00:03: setting system clock to 2022-07-25T07:26:41 UTC (1658734001)
[    4.145150] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    4.145512] intel_pstate: Intel P-state driver initializing
[    4.145891] intel_pstate: Disabling energy efficiency optimization
[    4.145891] intel_pstate: HWP enabled
[    4.146095] ledtrig-cpu: registered to indicate activity on CPUs
[    4.146253] hid: raw HID events driver (C) Jiri Kosina
[    4.146281] intel_pmc_core INT33A1:00:  initialized
[    4.146321] drop_monitor: Initializing network drop monitor service
[    4.155941] Initializing XFRM netlink socket
[    4.155993] NET: Registered PF_INET6 protocol family
[    4.157910] Segment Routing with IPv6
[    4.157911] RPL Segment Routing with IPv6
[    4.157916] In-situ OAM (IOAM) with IPv6
[    4.157928] NET: Registered PF_PACKET protocol family
[    4.158496] microcode: sig=0x906ed, pf=0x2, revision=0xf0
[    4.158667] microcode: Microcode Update Driver: v2.2.
[    4.158670] IPI shorthand broadcast: enabled
[    4.158676] sched_clock: Marking stable (4145048395, 13399937)->(4165428823, -6980491)
[    4.158887] registered taskstats version 1
[    4.159326] Loading compiled-in X.509 certificates
[    4.161478] Loaded X.509 cert 'Build time autogenerated kernel key: 94139d29b5e5062a3b6efbdd37afad226b54efe2'
[    4.161806] zswap: loaded using pool lz4/z3fold
[    4.162153] Key type ._fscrypt registered
[    4.162153] Key type .fscrypt registered
[    4.162154] Key type fscrypt-provisioning registered
[    4.162173] AppArmor: AppArmor sha1 policy hashing enabled
[    4.162937] PM:   Magic number: 14:1:421
[    4.163056] RAS: Correctable Errors collector initialized.
[    4.455287] ata6: SATA link down (SStatus 4 SControl 300)
[    4.455340] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.458579] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.458634] ata3: SATA link down (SStatus 4 SControl 300)
[    4.458699] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.458963] ata1.00: ATA-10: WDC WD20PURZ-85AKKY0, 80.00A80, max UDMA/133
[    4.459435] ata2.00: ATA-9: WDC WD20PURZ-85GU6Y0, 80.00A80, max UDMA/133
[    4.459706] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.459879] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.460852] ata2.00: configured for UDMA/133
[    4.460944] ata1.00: configured for UDMA/133
[    4.461323] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20PURZ-85A 0A80 PQ: 0 ANSI: 5
[    4.461442] ata5.00: ATA-9: TS256GSSD360S, R0123A0, max UDMA/133
[    4.462205] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    4.462214] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.462232] sd 0:0:0:0: [sda] Write Protect is off
[    4.462237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.462265] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.462440] scsi 1:0:0:0: Direct-Access     ATA      WDC WD20PURZ-85G 0A80 PQ: 0 ANSI: 5
[    4.463074] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    4.463083] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    4.463114] sd 1:0:0:0: [sdb] Write Protect is off
[    4.463122] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.463237] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.465138] ata5.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    4.476935] ata5.00: Features: Dev-Sleep
[    4.503953] ata5.00: configured for UDMA/133
[    4.504148] scsi 4:0:0:0: Direct-Access     ATA      TS256GSSD360S    3A0  PQ: 0 ANSI: 5
[    4.505180] sd 4:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    4.505268] sd 4:0:0:0: [sdc] Write Protect is off
[    4.505277] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    4.505403] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.524845]  sdc: sdc1 sdc2 sdc3
[    4.534255]  sdb: sdb1
[    4.545389] sd 4:0:0:0: [sdc] Attached SCSI disk
[    4.555371] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.572538]  sda: sda1
[    4.588204] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.592327] Freeing unused decrypted memory: 2036K
[    4.593159] Freeing unused kernel image (initmem) memory: 1868K
[    4.604734] Write protecting the kernel read-only data: 28672k
[    4.606142] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    4.606740] Freeing unused kernel image (rodata/data gap) memory: 1276K
[    4.647368] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.647372] rodata_test: all tests were successful
[    4.647377] Run /init as init process
[    4.647379]   with arguments:
[    4.647380]     /init
[    4.647381]   with environment:
[    4.647382]     HOME=/
[    4.647383]     TERM=linux
[    4.647384]     BOOT_IMAGE=/boot/vmlinuz-linux
[    4.699801] device-mapper: uevent: version 1.0.3
[    4.699898] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com
[    4.749355] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.749360] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    4.750445] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    4.750665] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.750667] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.750669] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.750693] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    4.750696] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.750697] usb usb1: Product: xHCI Host Controller
[    4.750698] usb usb1: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.750699] usb usb1: SerialNumber: 0000:00:14.0
[    4.750788] hub 1-0:1.0: USB hub found
[    4.750805] hub 1-0:1.0: 16 ports detected
[    4.752293] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    4.752295] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.752296] usb usb2: Product: xHCI Host Controller
[    4.752297] usb usb2: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.752297] usb usb2: SerialNumber: 0000:00:14.0
[    4.752340] hub 2-0:1.0: USB hub found
[    4.752355] hub 2-0:1.0: 10 ports detected
[    4.753415] xhci_hcd 0000:01:00.2: xHCI Host Controller
[    4.753418] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 3
[    4.753737] nvme nvme0: pci function 0000:09:00.0
[    4.754034] xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    4.754159] xhci_hcd 0000:01:00.2: xHCI Host Controller
[    4.754160] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
[    4.754162] xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    4.754186] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    4.754187] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.754188] usb usb3: Product: xHCI Host Controller
[    4.754189] usb usb3: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.754189] usb usb3: SerialNumber: 0000:01:00.2
[    4.754231] hub 3-0:1.0: USB hub found
[    4.754236] hub 3-0:1.0: 2 ports detected
[    4.754296] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.754306] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    4.754307] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.754308] usb usb4: Product: xHCI Host Controller
[    4.754308] usb usb4: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.754309] usb usb4: SerialNumber: 0000:01:00.2
[    4.754348] hub 4-0:1.0: USB hub found
[    4.754354] hub 4-0:1.0: 4 ports detected
[    4.754514] xhci_hcd 0000:08:00.0: failed to load firmware renesas_usb_fw.mem, fallback to ROM
[    4.754587] xhci_hcd 0000:08:00.0: xHCI Host Controller
[    4.754589] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5
[    4.759980] xhci_hcd 0000:08:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000410
[    4.760323] xhci_hcd 0000:08:00.0: xHCI Host Controller
[    4.760325] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6
[    4.760326] xhci_hcd 0000:08:00.0: Host supports USB 3.0 SuperSpeed
[    4.763583] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    4.763584] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.763585] usb usb5: Product: xHCI Host Controller
[    4.763586] usb usb5: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.763586] usb usb5: SerialNumber: 0000:08:00.0
[    4.763648] hub 5-0:1.0: USB hub found
[    4.763665] hub 5-0:1.0: 4 ports detected
[    4.763764] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.763774] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    4.763775] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.763776] usb usb6: Product: xHCI Host Controller
[    4.763776] usb usb6: Manufacturer: Linux 5.18.14-arch1-1 xhci-hcd
[    4.763777] usb usb6: SerialNumber: 0000:08:00.0
[    4.763836] hub 6-0:1.0: USB hub found
[    4.763853] hub 6-0:1.0: 4 ports detected
[    4.767504] nvme nvme0: allocated 32 MiB host memory buffer.
[    4.768716] nvme nvme0: 8/0/0 default/read/poll queues
[    4.771074]  nvme0n1: p1
[    5.004755] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    5.011414] usb 5-4: new high-speed USB device number 2 using xhci_hcd
[    5.030960] block device autoloading is deprecated and will be removed.
[    5.077806] md/raid1:md127: active with 2 out of 2 mirrors
[    5.130191] md127: detected capacity change from 0 to 3906762880
[    5.147773] usb 1-5: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[    5.147785] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.147791] usb 1-5: Product: USB Receiver
[    5.147795] usb 1-5: Manufacturer: Logitech
[    5.153803] usb 5-4: New USB device found, idVendor=214b, idProduct=7000, bcdDevice= 1.00
[    5.153814] usb 5-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.153821] usb 5-4: Product: USB2.0 HUB
[    5.158225] hub 5-4:1.0: USB hub found
[    5.158617] hub 5-4:1.0: 4 ports detected
[    5.158725] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C534.0001/input/input3
[    5.215081] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
[    5.217808] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/input/input4
[    5.217959] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/input/input5
[    5.271422] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    5.271739] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/input/input6
[    5.272300] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
[    5.272386] usbcore: registered new interface driver usbhid
[    5.272391] usbhid: USB HID core driver
[    5.413554] usb 1-6: New USB device found, idVendor=0951, idProduct=16dd, bcdDevice=21.11
[    5.413566] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.413572] usb 1-6: Product: HyperX Alloy Core RGB
[    5.413576] usb 1-6: Manufacturer: Kingston
[    5.416455] input: Kingston HyperX Alloy Core RGB as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:0951:16DD.0003/input/input9
[    5.422791] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
[    5.478630] hid-generic 0003:0951:16DD.0003: input,hidraw2: USB HID v1.11 Keyboard [Kingston HyperX Alloy Core RGB] on usb-0000:00:14.0-6/input0
[    5.481908] input: Kingston HyperX Alloy Core RGB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:0951:16DD.0004/input/input10
[    5.495083] input: Kingston HyperX Alloy Core RGB System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:0951:16DD.0004/input/input11
[    5.598377] input: Kingston HyperX Alloy Core RGB Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:0951:16DD.0004/input/input12
[    5.631788] input: Kingston HyperX Alloy Core RGB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:0951:16DD.0004/input/input13
[    5.632171] hid-generic 0003:0951:16DD.0004: input,hidraw1: USB HID v1.11 Mouse [Kingston HyperX Alloy Core RGB] on usb-0000:00:14.0-6/input1
[    5.632659] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
[    5.692945] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
[    5.693501] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/0003:046D:4054.0005/input/input14
[    5.693787] hid-generic 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:14.0-5/input1:2
[    5.735068] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/0003:046D:4054.0005/input/input18
[    5.735239] logitech-hidpp-device 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-5/input1:2
[    5.761414] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[    5.897603] PM: Image not found (code -22)
[    5.908955] usb 1-7: New USB device found, idVendor=13fe, idProduct=4200, bcdDevice= 1.10
[    5.908967] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.908972] usb 1-7: Product: USB DISK 2.0
[    5.908976] usb 1-7: Manufacturer:         
[    5.908980] usb 1-7: SerialNumber: 070C5987E013FB37
[    5.927680] usb-storage 1-7:1.0: USB Mass Storage device detected
[    5.928057] scsi host6: usb-storage 1-7:1.0
[    5.928213] usbcore: registered new interface driver usb-storage
[    5.952224] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Quota mode: none.
[    6.237578] systemd[1]: systemd 251.3-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    6.237588] systemd[1]: Detected architecture x86-64.
[    6.241533] systemd[1]: Hostname set to <dimich>.
[    6.470310] systemd[1]: Queued start job for default target Graphical Interface.
[    6.500592] systemd[1]: Created slice Slice /system/getty.
[    6.502123] systemd[1]: Created slice Slice /system/modprobe.
[    6.503513] systemd[1]: Created slice Slice /system/netctl.
[    6.504900] systemd[1]: Created slice Slice /system/systemd-fsck.
[    6.506135] systemd[1]: Created slice User and Session Slice.
[    6.506849] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.507543] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.508450] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.509117] systemd[1]: Reached target Local Encrypted Volumes.
[    6.509732] systemd[1]: Reached target Local Integrity Protected Volumes.
[    6.510378] systemd[1]: Reached target Path Units.
[    6.510980] systemd[1]: Reached target Remote File Systems.
[    6.511655] systemd[1]: Reached target Slice Units.
[    6.512281] systemd[1]: Reached target Swaps.
[    6.512909] systemd[1]: Reached target Local Verity Protected Volumes.
[    6.513634] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.515196] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.518710] systemd[1]: Listening on Process Core Dump Socket.
[    6.519616] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.520464] systemd[1]: Listening on Journal Socket.
[    6.522832] systemd[1]: Listening on udev Control Socket.
[    6.523619] systemd[1]: Listening on udev Kernel Socket.
[    6.526141] systemd[1]: Mounting Huge Pages File System...
[    6.528121] systemd[1]: Mounting POSIX Message Queue File System...
[    6.530033] systemd[1]: Mounting Kernel Debug File System...
[    6.531807] systemd[1]: Mounting Kernel Trace File System...
[    6.533541] systemd[1]: Starting Create List of Static Device Nodes...
[    6.535101] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.536652] systemd[1]: Starting Load Kernel Module configfs...
[    6.537984] systemd[1]: Starting Load Kernel Module drm...
[    6.539288] systemd[1]: Starting Load Kernel Module fuse...
[    6.539922] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[    6.541501] systemd[1]: Starting Journal Service...
[    6.545197] systemd[1]: Starting Load Kernel Modules...
[    6.546437] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.547016] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[    6.547466] systemd[1]: Starting Coldplug All udev Devices...
[    6.548716] systemd[1]: Mounted Huge Pages File System.
[    6.549277] systemd[1]: Mounted POSIX Message Queue File System.
[    6.549854] systemd[1]: Mounted Kernel Debug File System.
[    6.550405] systemd[1]: Mounted Kernel Trace File System.
[    6.551036] systemd[1]: Finished Create List of Static Device Nodes.
[    6.558188] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    6.558274] systemd[1]: Finished Load Kernel Module configfs.
[    6.558987] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    6.559079] systemd[1]: Finished Load Kernel Module drm.
[    6.560129] systemd[1]: Mounting Kernel Configuration File System...
[    6.561005] systemd[1]: Mounted Kernel Configuration File System.
[    6.561449] EXT4-fs (sdc2): re-mounted. Quota mode: none.
[    6.561894] fuse: init (API version 7.36)
[    6.561981] systemd[1]: Finished Remount Root and Kernel File Systems.
[    6.562632] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    6.562696] systemd[1]: Finished Load Kernel Module fuse.
[    6.563722] systemd[1]: Mounting FUSE Control File System...
[    6.564278] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
[    6.569251] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[    6.569820] systemd[1]: Starting Load/Save Random Seed...
[    6.570401] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[    6.570873] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.571737] systemd[1]: Mounted FUSE Control File System.
[    6.579169] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.579193] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    6.579278] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    6.587861] systemd[1]: Started Journal Service.
[    6.597740] systemd-journald[278]: Received client request to flush runtime journal.
[    6.607580] ppdev: user-space parallel port driver
[    6.614225] i2c_dev: i2c /dev entries driver
[    6.635452] usbcore: registered new interface driver pl2303
[    6.635457] usbserial: USB Serial support registered for pl2303
[    6.639432] usbcore: registered new interface driver cp210x
[    6.639437] usbserial: USB Serial support registered for cp210x
[    6.648797] loop: module loaded
[    6.668050] FS-Cache: Loaded
[    6.670936] Key type dns_resolver registered
[    6.720113] Key type cifs.spnego registered
[    6.720120] Key type cifs.idmap registered
[    6.829550] Key type encrypted registered
[    6.883050] 8139too: 8139too Fast Ethernet driver 0.9.28
[    6.897284] tun: Universal TUN/TAP device driver, 1.6
[    6.940387] scsi 6:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 6
[    6.940521] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    6.940760] sd 6:0:0:0: [sdd] 120938496 512-byte logical blocks: (61.9 GB/57.7 GiB)
[    6.940985] sd 6:0:0:0: [sdd] Write Protect is off
[    6.940986] sd 6:0:0:0: [sdd] Mode Sense: 45 00 00 00
[    6.941215] sd 6:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    6.942355] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    6.942456] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    6.943870]  sdd: sdd1
[    6.944116] EDAC ie31200: No ECC support
[    6.944136] EDAC ie31200: No ECC support
[    6.945090] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[    7.042592] xt_geoip: loading out-of-tree module taints kernel.
[    7.042657] xt_geoip: module verification failed: signature and/or required key missing - tainting kernel
[    7.147775] mei_me 0000:00:16.0: enabling device (0004 -> 0006)
[    7.148910] parport0: PC-style at 0x3100, irq 19 [PCSPP,TRISTATE]
[    7.158767] r8169 0000:03:00.0 eth0: RTL8168e/8111e, 10:fe:ed:05:fe:1a, XID 2c2, IRQ 151
[    7.158770] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    7.172976] r8169 0000:04:00.0 eth1: RTL8168h/8111h, f0:b4:d2:2c:7b:0c, XID 541, IRQ 152
[    7.172979] r8169 0000:04:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    7.189593] r8169 0000:06:00.0 eth2: RTL8168h/8111h, 18:c0:4d:33:b3:fb, XID 541, IRQ 153
[    7.189596] r8169 0000:06:00.0 eth2: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    7.241657] 0000:07:00.0: ttyS4 at I/O 0x30c0 (irq = 19, base_baud = 115200) is a XR16850
[    7.243008] 0000:07:00.0: ttyS5 at I/O 0x30c8 (irq = 19, base_baud = 115200) is a XR16850
[    7.339470] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    7.339567] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    7.340726] i2c i2c-0: 4/4 memory slots populated (from DMI)
[    7.341196] i2c i2c-0: Successfully instantiated SPD at 0x50
[    7.341728] i2c i2c-0: Successfully instantiated SPD at 0x51
[    7.342226] i2c i2c-0: Successfully instantiated SPD at 0x52
[    7.342929] i2c i2c-0: Successfully instantiated SPD at 0x53
[    7.349196] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
[    7.349198] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    7.349199] RAPL PMU: hw unit of domain package 2^-14 Joules
[    7.354118] cryptd: max_cpu_qlen set to 1000
[    7.433776] AVX2 version of gcm_enc/dec engaged.
[    7.433805] AES CTR mode by8 optimization enabled
[    7.438003] snd_hda_intel 0000:01:00.1: Disabling MSI
[    7.438176] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    7.451468] mousedev: PS/2 mouse device common for all mice
[    7.518683] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[    7.518710] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[    7.518745] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[    7.518765] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[    7.518786] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[    7.518808] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[    7.560177] usbcore: registered new interface driver uas
[    7.563498] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    7.563502] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.563503] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.563504] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.563504] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    7.563505] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.563506] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    7.563507] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    7.563508] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    7.581103] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    7.581128] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[    7.581148] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[    7.581171] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[    7.581190] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[    7.605796] r8169 0000:03:00.0 lan0: renamed from eth0
[    7.638255] r8169 0000:04:00.0 lan1: renamed from eth1
[    7.649493] EXT4-fs (md127): mounted filesystem with ordered data mode. Quota mode: none.
[    7.662255] r8169 0000:06:00.0 wan0: renamed from eth2
[    7.675476] intel_tcc_cooling: Programmable TCC Offset detected
[    7.678978] iTCO_vendor_support: vendor-support=0
[    7.681837] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    7.681854] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    7.681862] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[    7.681869] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[    7.683315] spi-nor spi0.0: mx25l12805d (16384 Kbytes)
[    7.685503] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    7.686363] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.687122] Creating 1 MTD partitions on "0000:00:1f.5":
[    7.687125] 0x000000000000-0x000001000000 : "BIOS"
[    7.855572] intel_rapl_common: Found RAPL domain package
[    7.855574] intel_rapl_common: Found RAPL domain core
[    7.882458] nvidia: module license 'NVIDIA' taints kernel.
[    7.882463] Disabling lock debugging due to kernel taint
[    8.020299] nvidia-nvlink: Nvlink Core is being initialized, major device number 511

[    8.021136] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    8.066984] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  515.57  Wed Jun 22 22:44:07 UTC 2022
[    8.175056] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[    8.186932] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  515.57  Wed Jun 22 22:31:08 UTC 2022
[    8.192737] nvidia-uvm: Loaded the UVM driver, major device number 509.
[    8.194123] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    8.256509] usbcore: registered new device driver usbip-host
[    8.262106] mc: Linux media interface: v0.10
[    8.309805] videodev: Linux video capture interface: v2.00
[    8.351840] usbcore: registered new interface driver uvcvideo
[    8.357821] vboxdrv: Found 8 processor cores
[    8.378322] vboxdrv: TSC mode is Invariant, tentative frequency 2999991715 Hz
[    8.378324] vboxdrv: Successfully loaded version 6.1.36 r152435 (interface 0x00320000)
[    8.399561] VBoxNetAdp: Successfully started.
[    8.401106] VBoxNetFlt: Successfully started.
[    8.945998] RTL8211DN Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[    9.073473] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[    9.232598] r8169 0000:03:00.0 lan0: Link is Down
[    9.287133] 8021q: 802.1Q VLAN Support v1.8
[    9.324531] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.324705] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   10.742331] r8169 0000:03:00.0 lan0: Link is Up - 100Mbps/Full - flow control rx/tx
[   10.742361] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready

This is how "broken" console looks like after logging in and running "seq 1 25" (no cursor visible, no any reaction to input):

But `fold -w 80 /dev/vcs1` run remotely showed content as it should be (and cursor is blinking after prompt):

2                                                                               
3                                                                               
4                                                                               
5                                                                               
6                                                                               
7                                                                               
8                                                                               
9                                                                               
10                                                                              
11                                                                              
12                                                                              
13                                                                              
14                                                                              
15                                                                              
16                                                                              
17                                                                              
18                                                                              
19                                                                              
20                                                                              
21                                                                              
22                                                                              
23                                                                              
24                                                                              
25                                                                              
[dimich@dimich ~]$

Last edited by dimich (2022-07-25 09:10:23)

seth · 2022-07-25 13:25:07

Both logs have

[    0.171697] Booted with the nomodeset parameter. Only the system framebuffer will be available
…
[    8.186932] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  515.57  Wed Jun 22 22:31:08 UTC 2022

What happens for "seq 1 250" and what is the output of "tput lines" (maybe run that before )?

dimich · 2022-07-25 14:46:35

seth wrote:

Both logs have

[    0.171697] Booted with the nomodeset parameter. Only the system framebuffer will be available
…
[    8.186932] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  515.57  Wed Jun 22 22:31:08 UTC 2022

I added `nomodeset` to kernel command line as you suggested in previous comment. With or without it i don't see any difference in behaviour and in dmesg except this line and two other lines with all parameters reported.

seth wrote:

What happens for "seq 1 250"

It displays column of numbers, range depends on line where command was run. If i run it right after login (command prompt on line 7) numbers are from 174 to 198. If i run it from bottom line, numbers are from 156 to 180.

seth wrote:

and what is the output of "tput lines" (maybe run that before )?

[dimich@dimich ~]$ tput lines                                                   
25                                                                              
[dimich@dimich ~]$ echo $LINES $COLUMNS                                         
25 80

Hm, `clear` command works and temporary recovers console (the same as switching to another VT and back). Ctrl+L and `reset` partially work if command prompt "went below bottom line" not so far.

seth · 2022-07-25 15:26:21

Have you tried the framebuffer console and or enforcing an enabled output (the names match what "xrandr -q" reports) and resolution?
Also check the behavior of (to see whether the previous output segment is just caused by the console optimizing away prints)

for ((i=1;i<80;++i)); do echo $i; sleep 0.1; done

dimich · 2022-07-25 17:02:57

seth wrote:

Have you tried the framebuffer console and or enforcing an enabled output (the names match what "xrandr -q" reports) and resolution?

I tried framebuffer console by setting GRUB_GFXMODE="1920x1080x32" (also other resolutions and depths) and GRUB_GFXPAYLOAD_LINUX="keep" to grub. Mode is set but scrolling is very slow, very uncomfortable to use it.

I also tried `video=HDMI-0:1920x1080M@60e` in kernel parameters ("HDMI-0" is reported by xrandr), also "card0-HDMI-A-1" instead of "HDMI-0" (as present in /sys/class/drm/) and "HDMI-A-1". No any effect.

seth wrote:

Also check the behavior of (to see whether the previous output segment is just caused by the console optimizing away prints)
for ((i=1;i<80;++i)); do echo $i; sleep 0.1; done

Image freezes as soon as output reaches bottom line, when existing image should be scrolled one line up but it doesn't.

Last edited by dimich (2022-07-25 17:03:47)

seth · 2022-07-25 20:28:22

Image freezes as soon as output reaches bottom line

feared as much since also the $LINES were accurate (so the output has just been optimized away)

Mode is set but scrolling is very slow, very uncomfortable to use it.

The more relevant question is whether the output now works as expected (just slow)

Does passing "vga=792" or using "GRUB_GFXMODE="1024x768x24" yield better results?

dimich · 2022-07-26 07:32:12

seth wrote:

The more relevant question is whether the output now works as expected (just slow)

Yes, it works as expected. Cursor doesn't fly out of visible area and picture doesn't stuck.

seth wrote:

Does passing "vga=792"

The same as GRUB_GFXMODE="1920x1080x32". 257 lines of `hexdump -C /dev/urandom -n 4096` take 3.5 s vs 0.14 s in text mode.

seth wrote:

or using "GRUB_GFXMODE="1024x768x24" yield better results?

Quite faster, 2.2 s for 257 lines, but still annoying.
I remember 20 years ago i tried VESA framebuffer console on 266 MHz CPU and was wondered why it is so slow. Performance remained the same since then

I would like to know if wierd console behaviour when X server is running and monitor powersave when no X server running are effects of the same bug or they are caused by different bugs. I suspected the kernel can't detect output where monitor is connected to, but /sys/class/drm/card0-*/status represent correct configuration. Also i don't fully understand VGA Arbiter role. I have no other GPUs in the system, my CPU doesn't have integrated one, so it shouldn't be involved.

seth · 2022-07-26 07:52:01

There's some problem w/ nvidia and the 5.18.14 kernel, reports are all over the place and so are the symptoms.
https://bbs.archlinux.org/viewtopic.php … 4#p2048514 is so far untested…

Edit: oh, and the framebuffer console has always been dog-slow w/ nvidia, feel free to try "GRUB_GFXMODE="640x480x24" but don't expect too much from that either.

Last edited by seth (2022-07-26 07:53:39)

dimich · 2022-07-26 12:31:17

seth wrote:

There's some problem w/ nvidia and the 5.18.14 kernel, reports are all over the place and so are the symptoms.
https://bbs.archlinux.org/viewtopic.php … 4#p2048514 is so far untested…

Yeah, symptoms look similar but not exactly equal. I tried with downgraded kernel to 5.18.12 and older driver.
I just tried nvidia-open. Monitor goes to powersave after switching to VT even with modeset=0 when X server is running. At least sources are available and i can try to poke around there.
Anyway, thank you for trying to help.

Morta · 2022-07-26 19:21:05

https://bbs.archlinux.org/viewtopic.php?id=278350

seth · 2022-07-26 22:10:45

loqs might very well have identified the offending patch, https://bbs.archlinux.org/viewtopic.php … 6#p2048716
Try to move the nvidia modules into the initramfs, but that's just a hunch - ideally try a kernel w/ that patch reverted.
https://wiki.archlinux.org/title/NVIDIA#Early_loading

dimich · 2022-07-27 07:37:51

seth wrote:

loqs might very well have identified the offending patch, https://bbs.archlinux.org/viewtopic.php … 6#p2048716
Try to move the nvidia modules into the initramfs, but that's just a hunch - ideally try a kernel w/ that patch reverted.
https://wiki.archlinux.org/title/NVIDIA#Early_loading

I build kernel with reverted 07186778cf645cc79e6913a28dadf445cd3e2439 and installed nvidia-dkms-515.57-1 ( i have pkgbase changed), put nvidia-modules to initrd (i already tried it with unpatched kernel) but it didn't help.
Patches are related to framebuffer device, i doubt they affect text mode VT console but who knows.

loqs · 2022-07-27 07:58:33

These are the commits in the current bisect range https://github.com/archlinux/linux/comp … 45cd3e2439

seth · 2022-07-27 08:20:53

There's the related https://git.kernel.org/pub/scm/linux/ke … 30ff95b6d8 - though all of this would have happened in 5.18.13 (so you should check whether that kernel exposes the same issues for you)

dimich · 2022-07-27 08:53:10

I observe issues even with 5.17.9-arch1-1. I can't get how bisecting 5.18.* can help in my case.

dimich · 2022-09-15 21:06:13

Solved by switching to UEFI boot. I got framebuffer console and its scrolling is pretty fast.
My previous attempts to use UEFI have been failed due to bug in firmware. It didn't recognize EFI system partition until i moved EFI/arch/grubx64.efi to EFI/boot/bootx64.efi.

Arch Linux

#1 2022-07-24 17:06:49

[SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#2 2022-07-24 19:11:56

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#3 2022-07-24 20:15:40

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#4 2022-07-25 09:09:37

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#5 2022-07-25 13:25:07

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#6 2022-07-25 14:46:35

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#7 2022-07-25 15:26:21

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#8 2022-07-25 17:02:57

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#9 2022-07-25 20:28:22

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#10 2022-07-26 07:32:12

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#11 2022-07-26 07:52:01

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#12 2022-07-26 12:31:17

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#13 2022-07-26 19:21:05

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#14 2022-07-26 22:10:45

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#15 2022-07-27 07:37:51

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#16 2022-07-27 07:58:33

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#17 2022-07-27 08:20:53

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#18 2022-07-27 08:53:10

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

#19 2022-09-15 21:06:13

Re: [SOLVED] Nvidia GeForce GTX 1660S: broken VGA console

Board footer