You are not logged in.
- Topics: Active | Unanswered
#1 2022-08-21 22:53:05
- synftw
- Member
- Registered: 2017-02-03
- Posts: 22
Cant access/find an extra internal hard drive (that may not exist)
Hey, all. I have a laptop that I believe has another 500gb internal harddrive. Either that, or I messed up on install and didn't create a partition such that the remainder of the one hard drive isn't being seen. I'm actually not sure since I don't know the hardware of this macihne. Any help identifying the what's going on would be greatly appreciated. Here's some relevant info, and I can provide any output requested:
fdisk -l
Disk /dev/sdb: 119.24 GiB, 128035676160 bytes, 250069680 sectors
Disk model: INTEL SSDSCKKF12
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 0421ACEB-8293-8549-B6CE-0C52EA49D376
Device Start End Sectors Size Type
/dev/sdb1 2048 616447 614400 300M EFI System
/dev/sdb2 616448 105474047 104857600 50G Linux filesystem
/dev/sdb3 105474048 250069646 144595599 68.9G Linux filesystemlsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 16E 0 disk
sdb 8:16 0 119.2G 0 disk
|-sdb1 8:17 0 300M 0 part
|-sdb2 8:18 0 50G 0 part /
`-sdb3 8:19 0 68.9G 0 part /homefstab file contents
# Static information about the filesystems.
# See fstab(5) for details.
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sdc2
UUID=f6b5d3db-6178-4d3d-a889-9c55dbc6e2d1 / ext4 rw,relatime 0 1
# /dev/sdc3
UUID=86e74f2a-ff05-4981-a1d7-4201aef083a9 /home ext4 rw,relatime 0 2
# /dev/sda1
#UUID=9dc3c4d0-faea-4336-be21-fefa967a003c /home/Downloads ext2 rw,relatime 0 2
#swapfile
/swapfile none swap sw 0 0Offline
#2 2022-08-21 23:06:21
- Trilby
- Inspector Parrot
- Registered: 2011-11-29
- Posts: 30,480
- Website
Re: Cant access/find an extra internal hard drive (that may not exist)
How do you not know whether there's a second drive or not - you said this is a laptop, right, not some remote server? Take a look, is there a second drive or not? Why would you suspect there is? Where is the laptop from?
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
#3 2022-08-21 23:14:07
- synftw
- Member
- Registered: 2017-02-03
- Posts: 22
Re: Cant access/find an extra internal hard drive (that may not exist)
Trilby wrote:
How do you not know whether there's a second drive or not - you said this is a laptop, right, not some remote server? Take a look, is there a second drive or not? Why would you suspect there is? Where is the laptop from?
The laptop is supposed to have 500gb (or maybe 1tb), but only 110gb of space is mounted. I'm not sure if the differenc e of space is supposed to be on a separate drive or the one with the partitions listed and I'd rather not open the case. It's a Dell Inspiron 5570.
Last edited by synftw (2022-08-21 23:15:41)
Offline
#4 2022-08-22 00:14:18
- Trilby
- Inspector Parrot
- Registered: 2011-11-29
- Posts: 30,480
- Website
Re: Cant access/find an extra internal hard drive (that may not exist)
synftw wrote:
The laptop is supposed to have 500gb (or maybe 1tb)...
Based on what? And again, how can you not even know? This is sounding fishier and fishier by the moment. Where / when did you get this laptop?
EDIT: Oops! Sorry I completely missed the sda listing in the lsblk output. My apologies. There is a second disk, but as noted below, something is quite off about it.
Last edited by Trilby (2022-08-22 01:03:09)
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
#5 2022-08-22 00:20:56
- schard
- Forum Moderator
- From: Hannover
- Registered: 2016-05-06
- Posts: 2,657
- Website
Re: Cant access/find an extra internal hard drive (that may not exist)
Well, if it has the disk, it's probably broken.
synftw wrote:
sda 8:0 0 16E 0 disk
Either that, or you got the first 16 exabyte disk, that I've ever known of.
Inofficial first vice president of the Rust Evangelism Strike Force
Offline
#6 2022-08-22 05:33:19
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,494
Re: Cant access/find an extra internal hard drive (that may not exist)
sudo smartctl -a /dev/sda?
Offline
#7 2022-08-22 18:50:32
- synftw
- Member
- Registered: 2017-02-03
- Posts: 22
Re: Cant access/find an extra internal hard drive (that may not exist)
seth wrote:
sudo smartctl -a /dev/sda?
sudo smartctl -a /dev/sda
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.50-1-lts] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Mobile HDD
Device Model: ST1000LM035-1RK172
Serial Number: ZDECGFMD
LU WWN Device Id: 5 000c50 0b2986df2
Firmware Version: SDM3
User Capacity: 18,446,744,073,709,551,104 bytes [18446 PB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s
Local Time is: Mon Aug 22 14:48:15 2022 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Read SMART Data failed: scsi error badly formed scsi parameters
=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error badly formed scsi parameters
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
Read SMART Log Directory failed: scsi error badly formed scsi parameters
Read SMART Error Log failed: scsi error badly formed scsi parameters
Read SMART Self-test Log failed: scsi error badly formed scsi parameters
Selective Self-tests/Logging not supportedsudo smartctl -a /dev/sdb
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.50-1-lts] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Intel 545s Series SSDs
Device Model: INTEL SSDSCKKF128G8 SATA 128GB
Serial Number: BTLA805410KG128I
LU WWN Device Id: 5 5cd2e4 14efc54a3
Firmware Version: LHFD04N
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: M.2
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Aug 22 14:49:08 2022 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 15) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7586
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1575
170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 450
175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 0
176 Erase_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 0
177 Wear_Leveling_Count 0x0033 094 094 005 Pre-fail Always - 56299
178 Used_Rsvd_Blk_Cnt_Chip 0x0033 100 100 010 Pre-fail Always - 0
179 Used_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 191
181 Program_Fail_Cnt_Total 0x0033 100 100 010 Pre-fail Always - 0
182 Erase_Fail_Count_Total 0x0033 100 100 010 Pre-fail Always - 0
183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 040 062 000 Old_age Always - 40 (Min/Max 9/62)
195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 2946367
199 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 173900
226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 0
227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 0
228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 0
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 093 093 000 Old_age Always - 0
238 Unknown_Attribute 0x0032 093 093 000 Old_age Always - 0
236 Unknown_Attribute 0x0032 094 094 000 Old_age Always - 0
241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 173900
242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 114990
249 NAND_Writes_1GiB 0x0032 100 100 000 Old_age Always - 15257
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 244 -
# 2 Short offline Completed without error 00% 203 -
# 3 Short offline Aborted by host 00% 191 -
# 4 Short offline Aborted by host 00% 191 -
# 5 Short offline Aborted by host 70% 191 -
# 6 Short offline Aborted by host 70% 191 -
# 7 Short offline Aborted by host 80% 190 -
# 8 Short offline Aborted by host 80% 190 -
# 9 Short offline Aborted by host 80% 190 -
#10 Short offline Aborted by host 90% 190 -
#11 Short offline Aborted by host 90% 190 -
#12 Short offline Aborted by host 90% 190 -
#13 Short offline Aborted by host 90% 190 -
#14 Short offline Aborted by host 90% 190 -
#15 Short offline Completed without error 00% 190 -
#16 Short offline Aborted by host 20% 190 -
#17 Short offline Aborted by host 20% 190 -
#18 Short offline Aborted by host 20% 190 -
#19 Short offline Aborted by host 20% 190 -
#20 Short offline Aborted by host 20% 190 -
#21 Short offline Completed without error 00% 118 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.schard wrote:
Well, if it has the disk, it's probably broken.
synftw wrote:sda 8:0 0 16E 0 diskEither that, or you got the first 16 exabyte disk, that I've ever known of.
That was throwing me off, too. I was googling around to see what kind of convention that could be but that's a difficult thing to query for. I was thinking some kind of exponent like ^16 with other info missing or something, maybe binary 2^16?
Last edited by synftw (2022-08-22 18:52:53)
Offline
#8 2022-08-22 18:57:51
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,494
Re: Cant access/find an extra internal hard drive (that may not exist)
Read SMART Data failed: scsi error badly formed scsi parameters
=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error badly formed scsi parameters
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
Read SMART Log Directory failed: scsi error badly formed scsi parameters
Read SMART Error Log failed: scsi error badly formed scsi parameters
Read SMART Self-test Log failed: scsi error badly formed scsi parameters
Selective Self-tests/Logging not supportedCable?
Are there ata/IO errors in dmesg?
Cable?
Cable?
Edit:
I have a laptop
Shit.
Cable?]
Seating?
Last edited by seth (2022-08-22 18:58:57)
Offline
#9 2022-08-22 19:05:16
- synftw
- Member
- Registered: 2017-02-03
- Posts: 22
Re: Cant access/find an extra internal hard drive (that may not exist)
seth wrote:
Read SMART Data failed: scsi error badly formed scsi parameters === START OF READ SMART DATA SECTION === SMART Status command failed: scsi error badly formed scsi parameters SMART overall-health self-assessment test result: UNKNOWN! SMART Status, Attributes and Thresholds cannot be read. Read SMART Log Directory failed: scsi error badly formed scsi parameters Read SMART Error Log failed: scsi error badly formed scsi parameters Read SMART Self-test Log failed: scsi error badly formed scsi parameters Selective Self-tests/Logging not supportedCable?
Are there ata/IO errors in dmesg?
Cable?
Cable?Edit:
I have a laptop
Shit.
Cable?]
Seating?
It's an internal drive and I wouldn't assume that there are errors with how it's seated.
I'm not familiar with dmesg to speak to ata/IO errors, but here is the entire output of dmesg:
[ 0.000000] Linux version 5.15.50-1-lts (linux-lts@archlinux) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP Sat, 25 Jun 2022 14:58:59 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=f6b5d3db-6178-4d3d-a889-9c55dbc6e2d1 rw loglevel=3 quiet resume=sdb2 resume_offset=851968
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 2032
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007b37bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b37c000-0x000000007b37cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007b37d000-0x000000007b37dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b37e000-0x000000008a23afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a23b000-0x000000008a5e3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008a5e4000-0x000000008a624fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008a625000-0x000000008af0dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008af0e000-0x000000008b51efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008b51f000-0x000000008b5fdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000008b5fe000-0x000000008b5fefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008b5ff000-0x000000008f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x8a5f1000 ACPI 2.0=0x8a5f1000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 ESRT=0x8b2a8118 MEMATTR=0x86f88018
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. Inspiron 5570/0PK559, BIOS 1.1.6 06/15/2018
[ 0.000000] tsc: Detected 2000.000 MHz processor
[ 0.000000] tsc: Detected 1999.968 MHz TSC
[ 0.000781] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000783] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000788] last_pfn = 0x26f800 max_arch_pfn = 0x400000000
[ 0.000880] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001499] last_pfn = 0x8b5ff max_arch_pfn = 0x400000000
[ 0.007946] esrt: Reserving ESRT space from 0x000000008b2a8118 to 0x000000008b2a8150.
[ 0.007952] Using GB pages for direct mapping
[ 0.008133] Secure boot could not be determined
[ 0.008133] RAMDISK: [mem 0x36edd000-0x37765fff]
[ 0.008136] ACPI: Early table checksum verification disabled
[ 0.008139] ACPI: RSDP 0x000000008A5F1000 000024 (v02 DELL )
[ 0.008142] ACPI: XSDT 0x000000008A5F10C8 00010C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.008147] ACPI: FACP 0x000000008A616670 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.008152] ACPI: DSDT 0x000000008A5F1260 02540E (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.008154] ACPI: FACS 0x000000008AF0B180 000040
[ 0.008157] ACPI: UEFI 0x000000008A617000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
[ 0.008159] ACPI: APIC 0x000000008A617640 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.008162] ACPI: FPDT 0x000000008A617700 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.008164] ACPI: FIDT 0x000000008A617748 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.008166] ACPI: MCFG 0x000000008A6177F8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.008169] ACPI: HPET 0x000000008A617838 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.008171] ACPI: SSDT 0x000000008A617870 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.008173] ACPI: BOOT 0x000000008A617BD0 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.008176] ACPI: SSDT 0x000000008A617BF8 0012DE (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.008178] ACPI: HPET 0x000000008A618ED8 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.008180] ACPI: SSDT 0x000000008A618F10 000825 (v02 INTEL xh_OEMBD 00000000 INTL 20160422)
[ 0.008183] ACPI: UEFI 0x000000008A619738 000042 (v01 00000000 00000000)
[ 0.008185] ACPI: SSDT 0x000000008A619780 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.008188] ACPI: LPIT 0x000000008A61AF30 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.008190] ACPI: WSMT 0x000000008A61AFC8 000028 (v01 DELL CBX3 00000000 MSFT 0000005F)
[ 0.008192] ACPI: SSDT 0x000000008A61AFF0 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.008195] ACPI: SSDT 0x000000008A61B138 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.008197] ACPI: SSDT 0x000000008A61B3D8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.008200] ACPI: SSDT 0x000000008A61E3E0 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.008202] ACPI: DBGP 0x000000008A61E8F8 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.008204] ACPI: DBG2 0x000000008A61E930 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.008206] ACPI: SSDT 0x000000008A61E988 0007AC (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.008209] ACPI: SSDT 0x000000008A61F138 004E1D (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.008211] ACPI: MSDM 0x000000008A623F58 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.008213] ACPI: SLIC 0x000000008A623FB0 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.008216] ACPI: BGRT 0x000000008A624128 000038 (v00 01072009 AMI 00010013)
[ 0.008218] ACPI: UEFI 0x000000008A624160 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
[ 0.008220] ACPI: DMAR 0x000000008A6241C0 0000CC (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.008222] ACPI: Reserving FACP table memory at [mem 0x8a616670-0x8a61677b]
[ 0.008224] ACPI: Reserving DSDT table memory at [mem 0x8a5f1260-0x8a61666d]
[ 0.008224] ACPI: Reserving FACS table memory at [mem 0x8af0b180-0x8af0b1bf]
[ 0.008225] ACPI: Reserving UEFI table memory at [mem 0x8a617000-0x8a617639]
[ 0.008226] ACPI: Reserving APIC table memory at [mem 0x8a617640-0x8a6176fb]
[ 0.008226] ACPI: Reserving FPDT table memory at [mem 0x8a617700-0x8a617743]
[ 0.008227] ACPI: Reserving FIDT table memory at [mem 0x8a617748-0x8a6177f3]
[ 0.008228] ACPI: Reserving MCFG table memory at [mem 0x8a6177f8-0x8a617833]
[ 0.008229] ACPI: Reserving HPET table memory at [mem 0x8a617838-0x8a61786f]
[ 0.008229] ACPI: Reserving SSDT table memory at [mem 0x8a617870-0x8a617bc8]
[ 0.008230] ACPI: Reserving BOOT table memory at [mem 0x8a617bd0-0x8a617bf7]
[ 0.008231] ACPI: Reserving SSDT table memory at [mem 0x8a617bf8-0x8a618ed5]
[ 0.008232] ACPI: Reserving HPET table memory at [mem 0x8a618ed8-0x8a618f0f]
[ 0.008232] ACPI: Reserving SSDT table memory at [mem 0x8a618f10-0x8a619734]
[ 0.008233] ACPI: Reserving UEFI table memory at [mem 0x8a619738-0x8a619779]
[ 0.008234] ACPI: Reserving SSDT table memory at [mem 0x8a619780-0x8a61af2d]
[ 0.008234] ACPI: Reserving LPIT table memory at [mem 0x8a61af30-0x8a61afc3]
[ 0.008235] ACPI: Reserving WSMT table memory at [mem 0x8a61afc8-0x8a61afef]
[ 0.008236] ACPI: Reserving SSDT table memory at [mem 0x8a61aff0-0x8a61b130]
[ 0.008237] ACPI: Reserving SSDT table memory at [mem 0x8a61b138-0x8a61b3d6]
[ 0.008237] ACPI: Reserving SSDT table memory at [mem 0x8a61b3d8-0x8a61e3d9]
[ 0.008238] ACPI: Reserving SSDT table memory at [mem 0x8a61e3e0-0x8a61e8f6]
[ 0.008239] ACPI: Reserving DBGP table memory at [mem 0x8a61e8f8-0x8a61e92b]
[ 0.008240] ACPI: Reserving DBG2 table memory at [mem 0x8a61e930-0x8a61e983]
[ 0.008240] ACPI: Reserving SSDT table memory at [mem 0x8a61e988-0x8a61f133]
[ 0.008241] ACPI: Reserving SSDT table memory at [mem 0x8a61f138-0x8a623f54]
[ 0.008242] ACPI: Reserving MSDM table memory at [mem 0x8a623f58-0x8a623fac]
[ 0.008243] ACPI: Reserving SLIC table memory at [mem 0x8a623fb0-0x8a624125]
[ 0.008244] ACPI: Reserving BGRT table memory at [mem 0x8a624128-0x8a62415f]
[ 0.008244] ACPI: Reserving UEFI table memory at [mem 0x8a624160-0x8a6241bb]
[ 0.008245] ACPI: Reserving DMAR table memory at [mem 0x8a6241c0-0x8a62428b]
[ 0.008354] No NUMA configuration found
[ 0.008354] Faking a node at [mem 0x0000000000000000-0x000000026f7fffff]
[ 0.008358] NODE_DATA(0) allocated [mem 0x26f7fc000-0x26f7fffff]
[ 0.008377] Zone ranges:
[ 0.008378] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008379] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008381] Normal [mem 0x0000000100000000-0x000000026f7fffff]
[ 0.008382] Device empty
[ 0.008383] Movable zone start for each node
[ 0.008383] Early memory node ranges
[ 0.008384] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.008385] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.008386] node 0: [mem 0x0000000000100000-0x000000007b37bfff]
[ 0.008387] node 0: [mem 0x000000007b37e000-0x000000008a23afff]
[ 0.008388] node 0: [mem 0x000000008b5fe000-0x000000008b5fefff]
[ 0.008388] node 0: [mem 0x0000000100000000-0x000000026f7fffff]
[ 0.008390] Initmem setup node 0 [mem 0x0000000000001000-0x000000026f7fffff]
[ 0.008393] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008394] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008432] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.016945] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.017018] On node 0, zone DMA32: 5059 pages in unavailable ranges
[ 0.040059] On node 0, zone Normal: 18945 pages in unavailable ranges
[ 0.040087] On node 0, zone Normal: 2048 pages in unavailable ranges
[ 0.040097] Reserving Intel graphics memory at [mem 0x8d800000-0x8f7fffff]
[ 0.040289] ACPI: PM-Timer IO Port: 0x1808
[ 0.040294] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.040296] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.040297] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.040297] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.040298] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.040298] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.040299] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.040300] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.040325] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.040328] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.040329] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.040332] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.040333] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.040338] e820: update [mem 0x87095000-0x8711dfff] usable ==> reserved
[ 0.040345] TSC deadline timer available
[ 0.040346] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.040360] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.040362] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.040364] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.040365] PM: hibernation: Registered nosave memory: [mem 0x7b37c000-0x7b37cfff]
[ 0.040366] PM: hibernation: Registered nosave memory: [mem 0x7b37d000-0x7b37dfff]
[ 0.040367] PM: hibernation: Registered nosave memory: [mem 0x87095000-0x8711dfff]
[ 0.040368] PM: hibernation: Registered nosave memory: [mem 0x8a23b000-0x8a5e3fff]
[ 0.040369] PM: hibernation: Registered nosave memory: [mem 0x8a5e4000-0x8a624fff]
[ 0.040370] PM: hibernation: Registered nosave memory: [mem 0x8a625000-0x8af0dfff]
[ 0.040370] PM: hibernation: Registered nosave memory: [mem 0x8af0e000-0x8b51efff]
[ 0.040371] PM: hibernation: Registered nosave memory: [mem 0x8b51f000-0x8b5fdfff]
[ 0.040372] PM: hibernation: Registered nosave memory: [mem 0x8b5ff000-0x8f7fffff]
[ 0.040373] PM: hibernation: Registered nosave memory: [mem 0x8f800000-0xdfffffff]
[ 0.040373] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.040374] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.040374] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.040375] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.040375] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.040376] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.040376] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.040377] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.040378] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.040379] [mem 0x8f800000-0xdfffffff] available for PCI devices
[ 0.040380] Booting paravirtualized kernel on bare hardware
[ 0.040382] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.044493] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.044736] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[ 0.044741] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[ 0.044743] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.044761] Built 1 zonelists, mobility grouping on. Total pages: 2038481
[ 0.044762] Policy zone: Normal
[ 0.044763] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=f6b5d3db-6178-4d3d-a889-9c55dbc6e2d1 rw loglevel=3 quiet resume=sdb2 resume_offset=851968
[ 0.044848] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-lts", will be passed to user space.
[ 0.045620] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.046060] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.046356] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.099780] Memory: 7976888K/8283992K available (14344K kernel code, 2055K rwdata, 10756K rodata, 1980K init, 3832K bss, 306844K reserved, 0K cma-reserved)
[ 0.100094] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.100111] Kernel/User page tables isolation: enabled
[ 0.100129] ftrace: allocating 44147 entries in 173 pages
[ 0.112416] ftrace: allocated 173 pages with 5 groups
[ 0.112543] rcu: Hierarchical RCU implementation.
[ 0.112544] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.112545] Rude variant of Tasks RCU enabled.
[ 0.112545] Tracing variant of Tasks RCU enabled.
[ 0.112546] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.112547] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.115829] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[ 0.116143] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.116151] random: crng init done
[ 0.116186] spurious 8259A interrupt: IRQ7.
[ 0.116211] Console: colour dummy device 80x25
[ 0.116222] printk: console [tty0] enabled
[ 0.116241] ACPI: Core revision 20210730
[ 0.116502] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.116605] APIC: Switch to symmetric I/O mode setup
[ 0.116607] DMAR: Host address width 39
[ 0.116608] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.116612] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.116614] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.116617] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.116619] DMAR: RMRR base: 0x0000008a30f000 end: 0x0000008a32efff
[ 0.116620] DMAR: RMRR base: 0x0000008d000000 end: 0x0000008f7fffff
[ 0.116621] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.116623] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.116625] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.116626] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.118827] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.118829] x2apic enabled
[ 0.118841] Switched APIC routing to cluster x2apic.
[ 0.122700] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.166343] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a8208cdd2, max_idle_ns: 881590748921 ns
[ 0.166347] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.93 BogoMIPS (lpj=19999680)
[ 0.166349] pid_max: default: 32768 minimum: 301
[ 0.167949] LSM: Security Framework initializing
[ 0.167956] landlock: Up and running.
[ 0.167957] Yama: becoming mindful.
[ 0.167966] LSM support for eBPF active
[ 0.168007] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.168034] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.168281] CPU0: Thermal monitoring enabled (TM1)
[ 0.168309] process: using mwait in idle threads
[ 0.168312] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.168313] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.168315] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.168317] Spectre V2 : Mitigation: Retpolines
[ 0.168317] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.168318] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.168319] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.168320] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.168321] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.168325] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.168326] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.168326] SRBDS: Vulnerable: No microcode
[ 0.172436] Freeing SMP alternatives memory: 36K
[ 0.173040] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1894
[ 0.173051] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[ 0.173173] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.173190] ... version: 4
[ 0.173190] ... bit width: 48
[ 0.173191] ... generic registers: 4
[ 0.173191] ... value mask: 0000ffffffffffff
[ 0.173192] ... max period: 00007fffffffffff
[ 0.173193] ... fixed-purpose events: 3
[ 0.173193] ... event mask: 000000070000000f
[ 0.173273] rcu: Hierarchical SRCU implementation.
[ 0.173982] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.174037] smp: Bringing up secondary CPUs ...
[ 0.174119] x86: Booting SMP configuration:
[ 0.174120] .... node #0, CPUs: #1 #2 #3 #4
[ 0.174841] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.174841] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.174841] #5 #6 #7
[ 0.174841] smp: Brought up 1 node, 8 CPUs
[ 0.174841] smpboot: Max logical packages: 1
[ 0.174841] smpboot: Total of 8 processors activated (31999.48 BogoMIPS)
[ 0.174841] devtmpfs: initialized
[ 0.174841] x86/mm: Memory block size: 128MB
[ 0.174841] ACPI: PM: Registering ACPI NVS region [mem 0x7b37c000-0x7b37cfff] (4096 bytes)
[ 0.174841] ACPI: PM: Registering ACPI NVS region [mem 0x8a625000-0x8af0dfff] (9342976 bytes)
[ 0.174841] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.174841] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.174841] pinctrl core: initialized pinctrl subsystem
[ 0.174841] PM: RTC time: 16:34:21, date: 2022-08-22
[ 0.174841] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.174841] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.174841] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.174841] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.174841] audit: initializing netlink subsys (disabled)
[ 0.174841] audit: type=2000 audit(1661186061.060:1): state=initialized audit_enabled=0 res=1
[ 0.174841] thermal_sys: Registered thermal governor 'fair_share'
[ 0.174841] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.174841] thermal_sys: Registered thermal governor 'step_wise'
[ 0.174841] thermal_sys: Registered thermal governor 'user_space'
[ 0.174841] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.174841] cpuidle: using governor ladder
[ 0.174841] cpuidle: using governor menu
[ 0.174841] Simple Boot Flag at 0x47 set to 0x80
[ 0.174841] HugeTLB: can free 4094 vmemmap pages for hugepages-1048576kB
[ 0.174841] ACPI: bus type PCI registered
[ 0.174841] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.174841] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.174841] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.174841] PCI: Using configuration type 1 for base access
[ 0.174841] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.176631] Kprobes globally optimized
[ 0.176634] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[ 0.176634] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.176634] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.176634] ACPI: Added _OSI(Module Device)
[ 0.176634] ACPI: Added _OSI(Processor Device)
[ 0.176634] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.176634] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.176634] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.176634] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.176634] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.213224] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.213468] ACPI Error: No pointer back to namespace node in package 00000000a7c6d616 (20210730/dsargs-301)
[ 0.213776] ACPI Error: No pointer back to namespace node in package 00000000cf21d376 (20210730/dsargs-301)
[ 0.213944] ACPI Error: No pointer back to namespace node in package 0000000058434435 (20210730/dsargs-301)
[ 0.217241] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.222718] ACPI: Dynamic OEM Table Load:
[ 0.222723] ACPI: SSDT 0xFFFF9FFA81286800 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.223112] ACPI Error: No pointer back to namespace node in package 00000000a7c6d616 (20210730/dsargs-301)
[ 0.223348] ACPI Error: No pointer back to namespace node in package 00000000cf21d376 (20210730/dsargs-301)
[ 0.223398] ACPI Error: No pointer back to namespace node in package 0000000058434435 (20210730/dsargs-301)
[ 0.223671] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[ 0.224631] ACPI: Dynamic OEM Table Load:
[ 0.224636] ACPI: SSDT 0xFFFF9FFA81270000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.224908] ACPI Error: No pointer back to namespace node in package 00000000a7c6d616 (20210730/dsargs-301)
[ 0.225145] ACPI Error: No pointer back to namespace node in package 00000000cf21d376 (20210730/dsargs-301)
[ 0.225195] ACPI Error: No pointer back to namespace node in package 0000000058434435 (20210730/dsargs-301)
[ 0.225915] ACPI: Dynamic OEM Table Load:
[ 0.225920] ACPI: SSDT 0xFFFF9FFA8012F000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.226815] ACPI Error: No pointer back to namespace node in package 00000000a7c6d616 (20210730/dsargs-301)
[ 0.227051] ACPI Error: No pointer back to namespace node in package 00000000cf21d376 (20210730/dsargs-301)
[ 0.227101] ACPI Error: No pointer back to namespace node in package 0000000058434435 (20210730/dsargs-301)
[ 0.227457] ACPI: Dynamic OEM Table Load:
[ 0.227461] ACPI: SSDT 0xFFFF9FFA81275800 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.227745] ACPI Error: No pointer back to namespace node in package 00000000a7c6d616 (20210730/dsargs-301)
[ 0.227980] ACPI Error: No pointer back to namespace node in package 00000000cf21d376 (20210730/dsargs-301)
[ 0.228030] ACPI Error: No pointer back to namespace node in package 0000000058434435 (20210730/dsargs-301)
[ 0.228389] ACPI: Dynamic OEM Table Load:
[ 0.228393] ACPI: SSDT 0xFFFF9FFA81272400 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.228678] ACPI Error: No pointer back to namespace node in package 00000000a7c6d616 (20210730/dsargs-301)
[ 0.228915] ACPI Error: No pointer back to namespace node in package 00000000cf21d376 (20210730/dsargs-301)
[ 0.228965] ACPI Error: No pointer back to namespace node in package 0000000058434435 (20210730/dsargs-301)
[ 0.231660] ACPI: EC: EC started
[ 0.231661] ACPI: EC: interrupt blocked
[ 0.238357] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.238359] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.238360] ACPI: Interpreter enabled
[ 0.238395] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.238398] ACPI: Using IOAPIC for interrupt routing
[ 0.238433] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.239041] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.263496] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.263502] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.265334] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.265903] PCI host bridge to bus 0000:00
[ 0.265904] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.265906] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.265907] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.265908] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.265909] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.265910] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.265911] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.265912] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.265913] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.265914] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.265915] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.265916] pci_bus 0000:00: root bus resource [mem 0x8f800000-0xdfffffff window]
[ 0.265917] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.265918] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.265975] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[ 0.266174] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[ 0.266182] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
[ 0.266188] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.266191] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.266205] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.266208] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.266443] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.266452] pci 0000:00:04.0: reg 0x10: [mem 0xd1320000-0xd1327fff 64bit]
[ 0.266827] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.266845] pci 0000:00:14.0: reg 0x10: [mem 0xd1310000-0xd131ffff 64bit]
[ 0.266910] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.267509] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.267527] pci 0000:00:14.2: reg 0x10: [mem 0xd1337000-0xd1337fff 64bit]
[ 0.267907] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.268113] pci 0000:00:15.0: reg 0x10: [mem 0xd1336000-0xd1336fff 64bit]
[ 0.269268] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.269289] pci 0000:00:16.0: reg 0x10: [mem 0xd1335000-0xd1335fff 64bit]
[ 0.269362] pci 0000:00:16.0: PME# supported from D3hot
[ 0.269762] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400
[ 0.269775] pci 0000:00:17.0: reg 0x10: [mem 0xd1330000-0xd1331fff]
[ 0.269783] pci 0000:00:17.0: reg 0x14: [mem 0xd1334000-0xd13340ff]
[ 0.269790] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.269798] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.269805] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.269812] pci 0000:00:17.0: reg 0x24: [mem 0xd1333000-0xd13337ff]
[ 0.269852] pci 0000:00:17.0: PME# supported from D3hot
[ 0.270183] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
[ 0.270258] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.270850] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.270924] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.271496] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[ 0.271857] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.271870] pci 0000:00:1f.2: reg 0x10: [mem 0xd132c000-0xd132ffff]
[ 0.272195] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.272216] pci 0000:00:1f.3: reg 0x10: [mem 0xd1328000-0xd132bfff 64bit]
[ 0.272241] pci 0000:00:1f.3: reg 0x20: [mem 0xd1300000-0xd130ffff 64bit]
[ 0.272286] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.273026] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.273084] pci 0000:00:1f.4: reg 0x10: [mem 0xd1332000-0xd13320ff 64bit]
[ 0.273155] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.273490] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[ 0.273514] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.273545] pci 0000:01:00.0: reg 0x18: [mem 0xd1204000-0xd1204fff 64bit]
[ 0.273566] pci 0000:01:00.0: reg 0x20: [mem 0xd1200000-0xd1203fff 64bit pref]
[ 0.273684] pci 0000:01:00.0: supports D1 D2
[ 0.273684] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.273860] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.273863] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.273866] pci 0000:00:1c.0: bridge window [mem 0xd1200000-0xd12fffff]
[ 0.274105] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
[ 0.274147] pci 0000:02:00.0: reg 0x10: [mem 0xd1000000-0xd11fffff 64bit]
[ 0.274383] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.274770] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.274774] pci 0000:00:1c.5: bridge window [mem 0xd1000000-0xd11fffff]
[ 0.277041] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.277092] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.277141] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.277190] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.277239] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.277288] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.277337] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.277386] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.281518] ACPI: EC: interrupt unblocked
[ 0.281519] ACPI: EC: event unblocked
[ 0.281526] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.281527] ACPI: EC: GPE=0x6e
[ 0.281528] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.281531] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.281576] iommu: Default domain type: Translated
[ 0.281576] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.281584] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.281584] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.281584] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.281584] vgaarb: loaded
[ 0.281584] SCSI subsystem initialized
[ 0.281584] libata version 3.00 loaded.
[ 0.281584] ACPI: bus type USB registered
[ 0.281584] usbcore: registered new interface driver usbfs
[ 0.281584] usbcore: registered new interface driver hub
[ 0.281584] usbcore: registered new device driver usb
[ 0.281584] pps_core: LinuxPPS API ver. 1 registered
[ 0.281584] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.281584] PTP clock support registered
[ 0.281584] EDAC MC: Ver: 3.0.0
[ 0.281584] Registered efivars operations
[ 0.281584] NetLabel: Initializing
[ 0.281584] NetLabel: domain hash size = 128
[ 0.281584] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.281584] NetLabel: unlabeled traffic allowed by default
[ 0.281584] PCI: Using ACPI for IRQ routing
[ 0.309152] PCI: pci_cache_line_size set to 64 bytes
[ 0.309515] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.309517] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.309518] e820: reserve RAM buffer [mem 0x7b37c000-0x7bffffff]
[ 0.309518] e820: reserve RAM buffer [mem 0x87095000-0x87ffffff]
[ 0.309519] e820: reserve RAM buffer [mem 0x8a23b000-0x8bffffff]
[ 0.309520] e820: reserve RAM buffer [mem 0x8b5ff000-0x8bffffff]
[ 0.309521] e820: reserve RAM buffer [mem 0x26f800000-0x26fffffff]
[ 0.309524] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.309524] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.309524] clocksource: Switched to clocksource tsc-early
[ 0.313158] VFS: Disk quotas dquot_6.6.0
[ 0.313158] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.313158] pnp: PnP ACPI init
[ 0.313158] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.313158] system 00:00: [io 0xffff] has been reserved
[ 0.313158] system 00:00: [io 0xffff] has been reserved
[ 0.313158] system 00:00: [io 0xffff] has been reserved
[ 0.313158] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.313158] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.313251] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.313895] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.313898] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.313899] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.313901] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.313903] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.313904] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.313905] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.313907] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.313908] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.313910] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.313944] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.313946] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.313947] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.313948] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.313950] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.313951] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.313952] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.314207] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.315184] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.315185] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.320113] pnp: PnP ACPI: found 9 devices
[ 0.325415] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.325465] NET: Registered PF_INET protocol family
[ 0.325580] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.326374] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.326405] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.326457] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.326599] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.326661] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.326728] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.326782] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.326806] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.326839] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.326843] NET: Registered PF_XDP protocol family
[ 0.326855] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.326858] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.326862] pci 0000:00:1c.0: bridge window [mem 0xd1200000-0xd12fffff]
[ 0.326868] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.326871] pci 0000:00:1c.5: bridge window [mem 0xd1000000-0xd11fffff]
[ 0.326877] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.326879] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.326880] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.326881] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.326882] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.326883] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.326884] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.326885] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.326886] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.326886] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.326887] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.326888] pci_bus 0000:00: resource 15 [mem 0x8f800000-0xdfffffff window]
[ 0.326889] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[ 0.326891] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.326891] pci_bus 0000:01: resource 1 [mem 0xd1200000-0xd12fffff]
[ 0.326892] pci_bus 0000:02: resource 1 [mem 0xd1000000-0xd11fffff]
[ 0.327367] PCI: CLS 0 bytes, default 64
[ 0.327382] DMAR: ACPI device "device:6b" under DMAR at fed91000 as 00:15.0
[ 0.327412] Trying to unpack rootfs image as initramfs...
[ 0.327547] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.327547] software IO TLB: mapped [mem 0x0000000082f88000-0x0000000086f88000] (64MB)
[ 0.347204] Initialise system trusted keyrings
[ 0.347213] Key type blacklist registered
[ 0.347258] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.348107] zbud: loaded
[ 0.354948] Key type asymmetric registered
[ 0.354951] Asymmetric key parser 'x509' registered
[ 0.354974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.355003] io scheduler mq-deadline registered
[ 0.355004] io scheduler kyber registered
[ 0.355026] io scheduler bfq registered
[ 0.355408] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ 0.355455] pcieport 0000:00:1c.0: AER: enabled with IRQ 122
[ 0.355659] pcieport 0000:00:1c.5: PME: Signaling with IRQ 123
[ 0.355699] pcieport 0000:00:1c.5: AER: enabled with IRQ 123
[ 0.355768] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.357234] ACPI: AC: AC Adapter [AC] (on-line)
[ 0.357273] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.357297] ACPI: button: Lid Switch [LID0]
[ 0.357317] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.357339] ACPI: button: Power Button [PBTN]
[ 0.357354] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.357362] ACPI: button: Sleep Button [SBTN]
[ 0.357377] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.357389] ACPI: button: Power Button [PWRF]
[ 0.357441] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.357446] ACPI Error: Aborting method \_PR.PR01._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 0.357471] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.357474] ACPI Error: Aborting method \_PR.PR02._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 0.357497] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.357500] ACPI Error: Aborting method \_PR.PR03._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 0.357522] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.357524] ACPI Error: Aborting method \_PR.PR04._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 0.357547] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.357550] ACPI Error: Aborting method \_PR.PR05._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 0.357571] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.357574] ACPI Error: Aborting method \_PR.PR06._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 0.357596] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.357599] ACPI Error: Aborting method \_PR.PR07._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 0.359229] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.359230] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 0.359406] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.361971] Non-volatile memory driver v1.3
[ 0.361972] Linux agpgart interface v0.103
[ 0.361973] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.364324] ahci 0000:00:17.0: version 3.0
[ 0.364525] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[ 0.364570] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl RAID mode
[ 0.364572] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.365586] scsi host0: ahci
[ 0.365686] scsi host1: ahci
[ 0.365841] scsi host2: ahci
[ 0.365871] ata1: SATA max UDMA/133 abar m2048@0xd1333000 port 0xd1333100 irq 124
[ 0.365873] ata2: SATA max UDMA/133 abar m2048@0xd1333000 port 0xd1333180 irq 124
[ 0.365875] ata3: SATA max UDMA/133 abar m2048@0xd1333000 port 0xd1333200 irq 124
[ 0.365911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.365920] ehci-pci: EHCI PCI platform driver
[ 0.365928] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.365930] ohci-pci: OHCI PCI platform driver
[ 0.365934] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.365960] usbcore: registered new interface driver usbserial_generic
[ 0.365963] usbserial: USB Serial support registered for generic
[ 0.366040] rtc_cmos 00:01: RTC can wake from S4
[ 0.366695] rtc_cmos 00:01: registered as rtc0
[ 0.366838] rtc_cmos 00:01: setting system clock to 2022-08-22T16:34:21 UTC (1661186061)
[ 0.366849] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.367313] intel_pstate: Intel P-state driver initializing
[ 0.367832] intel_pstate: HWP enabled
[ 0.368106] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.368299] efifb: probing for efifb
[ 0.368309] efifb: showing boot graphics
[ 0.369629] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[ 0.369630] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.369631] efifb: scrolling: redraw
[ 0.369632] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.369664] fbcon: Deferring console take-over
[ 0.369664] fb0: EFI VGA frame buffer device
[ 0.369681] hid: raw HID events driver (C) Jiri Kosina
[ 0.369715] intel_pmc_core INT33A1:00: initialized
[ 0.369790] drop_monitor: Initializing network drop monitor service
[ 0.369839] Initializing XFRM netlink socket
[ 0.369903] NET: Registered PF_INET6 protocol family
[ 0.375126] Freeing initrd memory: 8740K
[ 0.380054] Segment Routing with IPv6
[ 0.380055] RPL Segment Routing with IPv6
[ 0.380066] In-situ OAM (IOAM) with IPv6
[ 0.380088] NET: Registered PF_PACKET protocol family
[ 0.380841] microcode: sig=0x806ea, pf=0x80, revision=0x96
[ 0.381046] microcode: Microcode Update Driver: v2.2.
[ 0.381052] IPI shorthand broadcast: enabled
[ 0.381065] sched_clock: Marking stable (390462837, -9726691)->(396698840, -15962694)
[ 0.381608] registered taskstats version 1
[ 0.382361] Loading compiled-in X.509 certificates
[ 0.385097] Loaded X.509 cert 'Build time autogenerated kernel key: 7cff7c544f7f13f52db7be79b1ccb42893ee32e7'
[ 0.385583] zswap: loaded using pool lz4/z3fold
[ 0.386972] Key type ._fscrypt registered
[ 0.386973] Key type .fscrypt registered
[ 0.386974] Key type fscrypt-provisioning registered
[ 0.387348] PM: Magic number: 2:393:591
[ 0.387612] RAS: Correctable Errors collector initialized.
[ 0.389379] ACPI: battery: Slot [BAT0] (battery present)
[ 0.699883] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.701409] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 0.701419] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.701424] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.701561] ata1.00: failed to read native max address (err_mask=0x1)
[ 0.701568] ata1.00: HPA support seems broken, skipping HPA handling
[ 0.701572] ata1.00: ATA-8: ST1000LM035-1RK172, SDM3, max UDMA/133
[ 0.701577] ata1.00: 18446744073709551615 sectors, multi 16: LBA48 NCQ (depth 32)
[ 0.703126] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 0.703135] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.703141] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.703154] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.703512] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 SDM3 PQ: 0 ANSI: 5
[ 0.704343] sd 0:0:0:0: [sda] 18446744073709551615 512-byte logical blocks: (9.44 ZB/8.00 ZiB)
[ 0.704417] sd 0:0:0:0: [sda] Write Protect is off
[ 0.704423] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.704476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.806836] ata1.00: Read log 0x10 page 0x00 failed, Emask 0x1
[ 0.806846] ata1: failed to read log page 10h (errno=-5)
[ 0.806857] ata1.00: exception Emask 0x1 SAct 0x400000 SErr 0x0 action 0x0
[ 0.806862] ata1.00: irq_stat 0x40000001
[ 0.806873] ata1.00: failed command: READ FPDMA QUEUED
[ 0.806875] ata1.00: cmd 60/08:b0:00:00:00/00:00:00:00:00/40 tag 22 ncq dma 4096 in
res 51/04:b0:00:00:00/00:00:00:00:00/40 Emask 0x1 (device error)
[ 0.806886] ata1.00: status: { DRDY ERR }
[ 0.806889] ata1.00: error: { ABRT }
[ 0.807375] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.807401] ata1: EH complete
[ 0.846529] ata1.00: Read log 0x10 page 0x00 failed, Emask 0x1
[ 0.846534] ata1: failed to read log page 10h (errno=-5)
[ 0.846537] ata1.00: NCQ disabled due to excessive errors
[ 0.846539] ata1.00: exception Emask 0x1 SAct 0x100 SErr 0x0 action 0x0
[ 0.846542] ata1.00: irq_stat 0x40000001
[ 0.846545] ata1.00: failed command: READ FPDMA QUEUED
[ 0.846546] ata1.00: cmd 60/08:40:00:00:00/00:00:00:00:00/40 tag 8 ncq dma 4096 in
res 51/04:40:00:00:00/00:00:00:00:00/40 Emask 0x1 (device error)
[ 0.846554] ata1.00: status: { DRDY ERR }
[ 0.846556] ata1.00: error: { ABRT }
[ 0.846909] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.846928] ata1: EH complete
[ 0.886479] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 0.886492] ata1.00: irq_stat 0x40000001
[ 0.886497] ata1.00: failed command: READ DMA
[ 0.886500] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 9 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 0.886514] ata1.00: status: { DRDY ERR }
[ 0.886518] ata1.00: error: { ABRT }
[ 0.886846] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.886870] ata1: EH complete
[ 0.956525] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 0.956534] ata1.00: irq_stat 0x40000001
[ 0.956537] ata1.00: failed command: READ DMA
[ 0.956539] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 10 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 0.956548] ata1.00: status: { DRDY ERR }
[ 0.956551] ata1.00: error: { ABRT }
[ 0.956976] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.956999] ata1: EH complete
[ 0.996452] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 0.996456] ata1.00: irq_stat 0x40000001
[ 0.996458] ata1.00: failed command: READ DMA
[ 0.996460] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 11 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 0.996468] ata1.00: status: { DRDY ERR }
[ 0.996470] ata1.00: error: { ABRT }
[ 0.996756] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.996767] ata1: EH complete
[ 1.029903] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.036523] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.036530] ata1.00: irq_stat 0x40000001
[ 1.036533] ata1.00: failed command: READ DMA
[ 1.036535] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 12 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.036543] ata1.00: status: { DRDY ERR }
[ 1.036545] ata1.00: error: { ABRT }
[ 1.036987] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.037011] sd 0:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 1.037015] sd 0:0:0:0: [sda] tag#12 Sense Key : Illegal Request [current]
[ 1.037018] sd 0:0:0:0: [sda] tag#12 Add. Sense: Unaligned write command
[ 1.037021] sd 0:0:0:0: [sda] tag#12 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[ 1.037023] blk_update_request: I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
[ 1.037040] Buffer I/O error on dev sda, logical block 0, async page read
[ 1.037053] Buffer I/O error on dev sda, logical block 1, async page read
[ 1.037055] Buffer I/O error on dev sda, logical block 2, async page read
[ 1.037057] Buffer I/O error on dev sda, logical block 3, async page read
[ 1.037058] Buffer I/O error on dev sda, logical block 4, async page read
[ 1.037059] Buffer I/O error on dev sda, logical block 5, async page read
[ 1.037061] Buffer I/O error on dev sda, logical block 6, async page read
[ 1.037062] Buffer I/O error on dev sda, logical block 7, async page read
[ 1.037075] ata1: EH complete
[ 1.096464] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.096473] ata1.00: irq_stat 0x40000001
[ 1.096476] ata1.00: failed command: READ DMA
[ 1.096478] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 23 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.096487] ata1.00: status: { DRDY ERR }
[ 1.096490] ata1.00: error: { ABRT }
[ 1.096977] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.097002] ata1: EH complete
[ 1.156481] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.156491] ata1.00: irq_stat 0x40000001
[ 1.156494] ata1.00: failed command: READ DMA
[ 1.156497] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 13 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.156507] ata1.00: status: { DRDY ERR }
[ 1.156510] ata1.00: error: { ABRT }
[ 1.156789] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.156827] ata1: EH complete
[ 1.196477] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.196487] ata1.00: irq_stat 0x40000001
[ 1.196491] ata1.00: failed command: READ DMA
[ 1.196494] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.196504] ata1.00: status: { DRDY ERR }
[ 1.196507] ata1.00: error: { ABRT }
[ 1.196781] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.196807] ata1: EH complete
[ 1.236466] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.236474] ata1.00: irq_stat 0x40000001
[ 1.236478] ata1.00: failed command: READ DMA
[ 1.236480] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 1 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.236489] ata1.00: status: { DRDY ERR }
[ 1.236491] ata1.00: error: { ABRT }
[ 1.236754] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.236777] ata1: EH complete
[ 1.296476] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.296484] ata1.00: irq_stat 0x40000001
[ 1.296488] ata1.00: failed command: READ DMA
[ 1.296490] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 2 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.296500] ata1.00: status: { DRDY ERR }
[ 1.296503] ata1.00: error: { ABRT }
[ 1.296781] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.296805] ata1: EH complete
[ 1.336487] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.336497] ata1.00: irq_stat 0x40000001
[ 1.336500] ata1.00: failed command: READ DMA
[ 1.336503] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 3 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.336512] ata1.00: status: { DRDY ERR }
[ 1.336515] ata1.00: error: { ABRT }
[ 1.336786] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.336827] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 1.336843] sd 0:0:0:0: [sda] tag#3 Sense Key : Illegal Request [current]
[ 1.336847] sd 0:0:0:0: [sda] tag#3 Add. Sense: Unaligned write command
[ 1.336851] sd 0:0:0:0: [sda] tag#3 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[ 1.336853] blk_update_request: I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
[ 1.336860] Buffer I/O error on dev sda, logical block 0, async page read
[ 1.336865] Buffer I/O error on dev sda, logical block 1, async page read
[ 1.336880] ata1: EH complete
[ 1.336911] ldm_validate_partition_table(): Disk read failed.
[ 1.359653] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.361435] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.361445] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.361450] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.361606] ata3.00: ATA-10: INTEL SSDSCKKF128G8 SATA 128GB, LHFD04N, max UDMA/133
[ 1.361638] ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.362316] ata3.00: Features: Dev-Sleep
[ 1.363527] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.363537] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.363542] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.364265] ata3.00: configured for UDMA/133
[ 1.364611] scsi 2:0:0:0: Direct-Access ATA INTEL SSDSCKKF12 D04N PQ: 0 ANSI: 5
[ 1.365346] ata3.00: Enabling discard_zeroes_data
[ 1.365711] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.365793] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.365798] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.365837] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.366587] ata3.00: Enabling discard_zeroes_data
[ 1.386449] tsc: Refined TSC clocksource calibration: 1992.006 MHz
[ 1.386460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d5dac02a, max_idle_ns: 881590811122 ns
[ 1.386542] clocksource: Switched to clocksource tsc
[ 1.416418] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.416424] ata1.00: irq_stat 0x40000001
[ 1.416427] ata1.00: failed command: READ DMA
[ 1.416429] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 24 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.416437] ata1.00: status: { DRDY ERR }
[ 1.416439] ata1.00: error: { ABRT }
[ 1.416686] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.416705] ata1: EH complete
[ 1.438730] sdb: sdb1 sdb2 sdb3
[ 1.438967] ata3.00: Enabling discard_zeroes_data
[ 1.456362] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.456368] ata1.00: irq_stat 0x40000001
[ 1.456371] ata1.00: failed command: READ DMA
[ 1.456373] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 4 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.456381] ata1.00: status: { DRDY ERR }
[ 1.456383] ata1.00: error: { ABRT }
[ 1.456575] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.456593] ata1: EH complete
[ 1.466857] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.496485] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.496494] ata1.00: irq_stat 0x40000001
[ 1.496497] ata1.00: failed command: READ DMA
[ 1.496499] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 5 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.496508] ata1.00: status: { DRDY ERR }
[ 1.496511] ata1.00: error: { ABRT }
[ 1.496789] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.496815] ata1: EH complete
[ 1.536467] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.536476] ata1.00: irq_stat 0x40000001
[ 1.536480] ata1.00: failed command: READ DMA
[ 1.536483] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 6 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.536493] ata1.00: status: { DRDY ERR }
[ 1.536496] ata1.00: error: { ABRT }
[ 1.536761] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.536788] ata1: EH complete
[ 1.576472] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.576481] ata1.00: irq_stat 0x40000001
[ 1.576485] ata1.00: failed command: READ DMA
[ 1.576487] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 7 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.576497] ata1.00: status: { DRDY ERR }
[ 1.576500] ata1.00: error: { ABRT }
[ 1.576788] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.576812] ata1: EH complete
[ 1.636475] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.636484] ata1.00: irq_stat 0x40000001
[ 1.636488] ata1.00: failed command: READ DMA
[ 1.636490] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 14 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.636499] ata1.00: status: { DRDY ERR }
[ 1.636502] ata1.00: error: { ABRT }
[ 1.636784] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.636825] sd 0:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 1.636841] sd 0:0:0:0: [sda] tag#14 Sense Key : Illegal Request [current]
[ 1.636845] sd 0:0:0:0: [sda] tag#14 Add. Sense: Unaligned write command
[ 1.636849] sd 0:0:0:0: [sda] tag#14 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[ 1.636851] blk_update_request: I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
[ 1.636875] ata1: EH complete
[ 1.696522] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.696531] ata1.00: irq_stat 0x40000001
[ 1.696535] ata1.00: failed command: READ DMA
[ 1.696537] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 25 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.696547] ata1.00: status: { DRDY ERR }
[ 1.696550] ata1.00: error: { ABRT }
[ 1.696826] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.696855] ata1: EH complete
[ 1.736479] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.736488] ata1.00: irq_stat 0x40000001
[ 1.736492] ata1.00: failed command: READ DMA
[ 1.736494] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 15 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.736504] ata1.00: status: { DRDY ERR }
[ 1.736507] ata1.00: error: { ABRT }
[ 1.736782] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.736807] ata1: EH complete
[ 1.776473] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.776481] ata1.00: irq_stat 0x40000001
[ 1.776485] ata1.00: failed command: READ DMA
[ 1.776488] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 16 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.776497] ata1.00: status: { DRDY ERR }
[ 1.776500] ata1.00: error: { ABRT }
[ 1.776783] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.776807] ata1: EH complete
[ 1.816474] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.816483] ata1.00: irq_stat 0x40000001
[ 1.816487] ata1.00: failed command: READ DMA
[ 1.816489] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 17 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.816499] ata1.00: status: { DRDY ERR }
[ 1.816502] ata1.00: error: { ABRT }
[ 1.816775] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.816799] ata1: EH complete
[ 1.856470] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.856479] ata1.00: irq_stat 0x40000001
[ 1.856483] ata1.00: failed command: READ DMA
[ 1.856485] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 18 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.856495] ata1.00: status: { DRDY ERR }
[ 1.856498] ata1.00: error: { ABRT }
[ 1.856774] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.856813] ata1: EH complete
[ 1.896484] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.896494] ata1.00: irq_stat 0x40000001
[ 1.896498] ata1.00: failed command: READ DMA
[ 1.896501] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 19 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.896511] ata1.00: status: { DRDY ERR }
[ 1.896515] ata1.00: error: { ABRT }
[ 1.896809] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.896866] sd 0:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 1.896884] sd 0:0:0:0: [sda] tag#19 Sense Key : Illegal Request [current]
[ 1.896888] sd 0:0:0:0: [sda] tag#19 Add. Sense: Unaligned write command
[ 1.896892] sd 0:0:0:0: [sda] tag#19 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[ 1.896894] blk_update_request: I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
[ 1.896919] ata1: EH complete
[ 1.956525] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.956535] ata1.00: irq_stat 0x40000001
[ 1.956539] ata1.00: failed command: READ DMA
[ 1.956542] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 26 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.956552] ata1.00: status: { DRDY ERR }
[ 1.956556] ata1.00: error: { ABRT }
[ 1.956829] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.956855] ata1: EH complete
[ 1.996468] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.996477] ata1.00: irq_stat 0x40000001
[ 1.996482] ata1.00: failed command: READ DMA
[ 1.996484] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 20 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1.996494] ata1.00: status: { DRDY ERR }
[ 1.996498] ata1.00: error: { ABRT }
[ 1.996765] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.996791] ata1: EH complete
[ 2.036476] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2.036485] ata1.00: irq_stat 0x40000001
[ 2.036490] ata1.00: failed command: READ DMA
[ 2.036492] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 21 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 2.036503] ata1.00: status: { DRDY ERR }
[ 2.036506] ata1.00: error: { ABRT }
[ 2.036783] ata1.00: configured for UDMA/133 (device error ignored)
[ 2.036809] ata1: EH complete
[ 2.076469] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2.076479] ata1.00: irq_stat 0x40000001
[ 2.076483] ata1.00: failed command: READ DMA
[ 2.076486] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 22 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 2.076497] ata1.00: status: { DRDY ERR }
[ 2.076500] ata1.00: error: { ABRT }
[ 2.076795] ata1.00: configured for UDMA/133 (device error ignored)
[ 2.076821] ata1: EH complete
[ 2.116481] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2.116490] ata1.00: irq_stat 0x40000001
[ 2.116495] ata1.00: failed command: READ DMA
[ 2.116497] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 23 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 2.116507] ata1.00: status: { DRDY ERR }
[ 2.116510] ata1.00: error: { ABRT }
[ 2.116786] ata1.00: configured for UDMA/133 (device error ignored)
[ 2.116812] ata1: EH complete
[ 2.156471] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2.156481] ata1.00: irq_stat 0x40000001
[ 2.156485] ata1.00: failed command: READ DMA
[ 2.156487] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 27 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 2.156498] ata1.00: status: { DRDY ERR }
[ 2.156501] ata1.00: error: { ABRT }
[ 2.156768] ata1.00: configured for UDMA/133 (device error ignored)
[ 2.156833] sd 0:0:0:0: [sda] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 2.156851] sd 0:0:0:0: [sda] tag#27 Sense Key : Illegal Request [current]
[ 2.156855] sd 0:0:0:0: [sda] tag#27 Add. Sense: Unaligned write command
[ 2.156859] sd 0:0:0:0: [sda] tag#27 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[ 2.156861] blk_update_request: I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
[ 2.156886] ata1: EH complete
[ 2.156932] sda: unable to read partition table
[ 2.216949] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.219053] Freeing unused decrypted memory: 2036K
[ 2.219675] Freeing unused kernel image (initmem) memory: 1980K
[ 2.276477] Write protecting the kernel read-only data: 28672k
[ 2.277463] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 2.278049] Freeing unused kernel image (rodata/data gap) memory: 1532K
[ 2.321094] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.321097] rodata_test: all tests were successful
[ 2.321098] x86/mm: Checking user space page tables
[ 2.356982] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.356985] Run /init as init process
[ 2.356986] with arguments:
[ 2.356987] /init
[ 2.356988] with environment:
[ 2.356988] HOME=/
[ 2.356989] TERM=linux
[ 2.356989] BOOT_IMAGE=/boot/vmlinuz-linux-lts
[ 2.386654] fbcon: Taking over console
[ 2.386705] Console: switching to colour frame buffer device 240x67
[ 2.479399] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.479425] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.480543] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 2.480695] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.481014] i8042: Warning: Keylock active
[ 2.481194] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 2.481199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.481202] usb usb1: Product: xHCI Host Controller
[ 2.481204] usb usb1: Manufacturer: Linux 5.15.50-1-lts xhci-hcd
[ 2.481206] usb usb1: SerialNumber: 0000:00:14.0
[ 2.481343] hub 1-0:1.0: USB hub found
[ 2.481367] hub 1-0:1.0: 12 ports detected
[ 2.482446] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.482452] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.483634] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.483640] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.483643] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.483875] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 2.483879] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.483881] usb usb2: Product: xHCI Host Controller
[ 2.483883] usb usb2: Manufacturer: Linux 5.15.50-1-lts xhci-hcd
[ 2.483885] usb usb2: SerialNumber: 0000:00:14.0
[ 2.484016] hub 2-0:1.0: USB hub found
[ 2.484033] hub 2-0:1.0: 6 ports detected
[ 2.485134] usb: port power management may be unreliable
[ 2.495058] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.739304] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 2.766415] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 2.950751] systemd[1]: systemd 251.2-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 2.950757] systemd[1]: Detected architecture x86-64.
[ 2.951410] systemd[1]: Hostname set to <archbox>.
[ 2.974070] usb 1-5: New USB device found, idVendor=0bda, idProduct=568a, bcdDevice=65.10
[ 2.974076] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.974079] usb 1-5: Product: Integrated Webcam
[ 2.974081] usb 1-5: Manufacturer: CNFFH36O30144003ED82
[ 2.974083] usb 1-5: SerialNumber: 0x0001
[ 3.050807] systemd[1]: Queued start job for default target Graphical Interface.
[ 3.052092] systemd[1]: Created slice Slice /system/getty.
[ 3.052438] systemd[1]: Created slice Slice /system/modprobe.
[ 3.052744] systemd[1]: Created slice Slice /system/netctl.
[ 3.053020] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 3.053232] systemd[1]: Created slice User and Session Slice.
[ 3.053305] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.053354] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.053502] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.053540] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.053562] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 3.053584] systemd[1]: Reached target Path Units.
[ 3.053601] systemd[1]: Reached target Remote File Systems.
[ 3.053611] systemd[1]: Reached target Slice Units.
[ 3.053636] systemd[1]: Reached target Local Verity Protected Volumes.
[ 3.053710] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.053915] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.055088] systemd[1]: Listening on Process Core Dump Socket.
[ 3.055934] systemd[1]: Listening on Journal Audit Socket.
[ 3.056052] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.056167] systemd[1]: Listening on Journal Socket.
[ 3.056437] systemd[1]: Listening on udev Control Socket.
[ 3.056530] systemd[1]: Listening on udev Kernel Socket.
[ 3.057360] systemd[1]: Mounting Huge Pages File System...
[ 3.058135] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.058927] systemd[1]: Mounting Kernel Debug File System...
[ 3.059779] systemd[1]: Mounting Kernel Trace File System...
[ 3.060677] systemd[1]: Starting Create List of Static Device Nodes...
[ 3.061485] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 3.062419] systemd[1]: Starting Load Kernel Module configfs...
[ 3.063279] systemd[1]: Starting Load Kernel Module drm...
[ 3.064109] systemd[1]: Starting Load Kernel Module fuse...
[ 3.064179] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 3.065954] systemd[1]: Starting Journal Service...
[ 3.075966] systemd[1]: Starting Load Kernel Modules...
[ 3.076879] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.076977] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[ 3.077992] systemd[1]: Starting Coldplug All udev Devices...
[ 3.080267] systemd[1]: Mounted Huge Pages File System.
[ 3.080423] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.080549] systemd[1]: Mounted Kernel Debug File System.
[ 3.080688] systemd[1]: Mounted Kernel Trace File System.
[ 3.080974] systemd[1]: Finished Create List of Static Device Nodes.
[ 3.081419] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 3.081620] systemd[1]: Finished Load Kernel Module configfs.
[ 3.081994] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 3.082204] systemd[1]: Finished Load Kernel Module drm.
[ 3.083498] systemd[1]: Mounting Kernel Configuration File System...
[ 3.085676] systemd[1]: Mounted Kernel Configuration File System.
[ 3.085722] EXT4-fs (sdb2): re-mounted. Opts: (null). Quota mode: none.
[ 3.086669] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.086755] audit: type=1130 audit(1661186064.209:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.087649] systemd[1]: Activating swap /swapfile...
[ 3.087789] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
[ 3.088650] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[ 3.089892] systemd[1]: Starting Load/Save Random Seed...
[ 3.089996] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[ 3.090138] fuse: init (API version 7.34)
[ 3.091134] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.091690] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 3.091920] systemd[1]: Finished Load Kernel Module fuse.
[ 3.092026] audit: type=1130 audit(1661186064.209:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.092044] audit: type=1131 audit(1661186064.209:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.092425] systemd[1]: Finished Load Kernel Modules.
[ 3.092465] audit: type=1130 audit(1661186064.209:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.093538] systemd[1]: Mounting FUSE Control File System...
[ 3.094674] systemd[1]: Starting Apply Kernel Variables...
[ 3.096267] Adding 6291452k swap on /swapfile. Priority:-2 extents:5 across:6725628k SSFS
[ 3.096332] systemd[1]: Activated swap /swapfile.
[ 3.097215] systemd[1]: Mounted FUSE Control File System.
[ 3.097300] systemd[1]: Reached target Swaps.
[ 3.099906] systemd[1]: Mounting Temporary Directory /tmp...
[ 3.101517] systemd[1]: Mounted Temporary Directory /tmp.
[ 3.102584] systemd[1]: Finished Load/Save Random Seed.
[ 3.102627] audit: type=1130 audit(1661186064.219:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.102689] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
[ 3.103745] systemd[1]: Finished Apply Kernel Variables.
[ 3.103776] audit: type=1130 audit(1661186064.219:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.116404] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 3.117208] systemd[1]: Started Journal Service.
[ 3.117286] audit: type=1130 audit(1661186064.239:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.121761] systemd-journald[265]: Received client request to flush runtime journal.
[ 3.122287] audit: type=1130 audit(1661186064.239:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.122980] audit: type=1334 audit(1661186064.239:10): prog-id=14 op=LOAD
[ 3.261500] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.265797] input: Intel HID events as /devices/platform/INT33D5:00/input/input6
[ 3.267808] intel-hid INT33D5:00: platform supports 5 button array
[ 3.267843] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input7
[ 3.269491] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 3.270062] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 3.271470] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20210730/nsprepkg-94)
[ 3.320365] usb 1-6: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 3.320376] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.320378] usb 1-6: Product: USB2.0-CRW
[ 3.320379] usb 1-6: Manufacturer: Generic
[ 3.320380] usb 1-6: SerialNumber: 20100201396000000
[ 3.396619] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 3.463455] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 3.466391] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 3.469521] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 3.469836] ACPI Error: No pointer back to namespace node in package 00000000a7c6d616 (20210730/dsargs-301)
[ 3.469847] ACPI Error: Aborting method \_SB.PCI0.B0D4.PPCC due to previous error (AE_AML_INTERNAL) (20210730/psparse-529)
[ 3.512276] checking generic (c0000000 7f0000) vs hw (d0000000 1000000)
[ 3.512279] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[ 3.512280] fb0: switching to i915 from EFI VGA
[ 3.512413] Console: switching to colour dummy device 80x25
[ 3.512451] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 3.515014] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.518343] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 3.567078] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 3.567090] i915 0000:00:02.0: [drm] [ENCODER:111:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 3.601519] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 3.606679] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.608515] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 3.648443] usb 1-7: New USB device found, idVendor=0cf3, idProduct=e009, bcdDevice= 0.01
[ 3.648454] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.648598] input: DELL0810:00 044E:120A Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0810:00/0018:044E:120A.0001/input/input9
[ 3.648717] input: DELL0810:00 044E:120A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0810:00/0018:044E:120A.0001/input/input10
[ 3.648843] input: DELL0810:00 044E:120A as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0810:00/0018:044E:120A.0001/input/input11
[ 3.649041] hid-generic 0018:044E:120A.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0810:00 044E:120A] on i2c-DELL0810:00
[ 3.725353] fbcon: i915drmfb (fb0) is primary device
[ 3.796476] usb 1-9: new full-speed USB device number 5 using xhci_hcd
[ 3.988500] usb 1-9: New USB device found, idVendor=27c6, idProduct=5301, bcdDevice= 1.00
[ 3.988510] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.988515] usb 1-9: Product: Goodix Fingerprint Device
[ 3.988518] usb 1-9: Manufacturer: HTMicroelectronics
[ 3.988521] usb 1-9: SerialNumber: HTK32
[ 4.177165] mc: Linux media interface: v0.10
[ 4.181134] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 4.181135] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.181136] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.181137] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.181137] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 4.181138] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 4.448952] cryptd: max_cpu_qlen set to 1000
[ 4.472320] AVX2 version of gcm_enc/dec engaged.
[ 4.472358] AES CTR mode by8 optimization enabled
[ 4.797623] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input12
[ 4.857119] Console: switching to colour frame buffer device 240x67
[ 4.883537] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 5.102371] intel_rapl_common: Found RAPL domain package
[ 5.102375] intel_rapl_common: Found RAPL domain core
[ 5.102376] intel_rapl_common: Found RAPL domain uncore
[ 5.102378] intel_rapl_common: Found RAPL domain dram
[ 5.102379] intel_rapl_common: Found RAPL domain psys
[ 5.104229] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 5.104261] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.108915] videodev: Linux video capture interface: v2.00
[ 5.113614] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 5.131069] r8169 0000:01:00.0 eth0: RTL8106e, 54:bf:64:41:db:6b, XID 449, IRQ 128
[ 5.138539] i2c i2c-6: 1/2 memory slots populated (from DMI)
[ 5.242731] kauditd_printk_skb: 19 callbacks suppressed
[ 5.242738] audit: type=1130 audit(1661186066.359:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.308459] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.319462] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.319623] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.319635] cfg80211: failed to load regulatory.db
[ 5.457012] usbcore: registered new interface driver rtsx_usb
[ 5.484609] cdc_acm 1-9:1.0: ttyACM0: USB ACM device
[ 5.484700] usbcore: registered new interface driver cdc_acm
[ 5.484706] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5.522075] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 5.557148] mousedev: PS/2 mouse device common for all mice
[ 5.581328] iTCO_vendor_support: vendor-support=0
[ 5.647933] usb 1-5: Found UVC 1.00 device Integrated Webcam (0bda:568a)
[ 5.676256] Bluetooth: Core ver 2.22
[ 5.676301] NET: Registered PF_BLUETOOTH protocol family
[ 5.676304] Bluetooth: HCI device and connection manager initialized
[ 5.676312] Bluetooth: HCI socket layer initialized
[ 5.676317] Bluetooth: L2CAP socket layer initialized
[ 5.676324] Bluetooth: SCO socket layer initialized
[ 5.691023] input: Integrated Webcam: Integrated W as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
[ 5.726790] usbcore: registered new interface driver uvcvideo
[ 5.788606] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 5.790247] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.791114] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input14
[ 5.919328] intel_tcc_cooling: Programmable TCC Offset detected
[ 5.967065] input: DELL0810:00 044E:120A Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0810:00/0018:044E:120A.0001/input/input15
[ 5.968659] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 5.969418] input: DELL0810:00 044E:120A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0810:00/0018:044E:120A.0001/input/input16
[ 5.969374] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.976983] input: DELL0810:00 044E:120A UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0810:00/0018:044E:120A.0001/input/input17
[ 5.978338] hid-multitouch 0018:044E:120A.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0810:00 044E:120A] on i2c-DELL0810:00
[ 6.029494] audit: type=1130 audit(1661186067.149:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@leds:dell::kbd_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.273419] usbcore: registered new interface driver btusb
[ 6.290847] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 6.292254] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 6.298130] audit: type=1130 audit(1661186067.419:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.301923] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 6.301931] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 6.316904] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.316920] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.316928] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.316936] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.316941] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.316947] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 6.316953] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 6.316959] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.406339] audit: type=1130 audit(1661186067.519:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.487544] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 6.487565] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6.487569] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 6.487574] pcieport 0000:00:1c.5: [ 0] RxErr (First)
[ 6.509911] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.509920] Bluetooth: BNEP filters: protocol multicast
[ 6.509930] Bluetooth: BNEP socket layer initialized
[ 6.518162] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 6.518365] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 6.518388] audit: type=1334 audit(1661186067.639:34): prog-id=21 op=LOAD
[ 6.518518] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 6.518712] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 6.518752] audit: type=1334 audit(1661186067.639:35): prog-id=22 op=LOAD
[ 6.518923] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 6.518933] audit: type=1334 audit(1661186067.639:36): prog-id=23 op=LOAD
[ 6.519116] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 6.569649] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 6.569668] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6.569672] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 6.569676] pcieport 0000:00:1c.5: [ 0] RxErr (First)
[ 6.569686] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 6.569696] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 6.617855] audit: type=1130 audit(1661186067.739:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.637821] audit: type=1130 audit(1661186067.759:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.681861] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 6.767391] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1028:1810
[ 6.767397] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
[ 6.767838] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[ 6.834696] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[ 6.931374] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 6.967777] NET: Registered PF_ALG protocol family
[ 7.049248] ath: EEPROM regdomain: 0x6c
[ 7.049254] ath: EEPROM indicates we should expect a direct regpair map
[ 7.049256] ath: Country alpha2 being used: 00
[ 7.049258] ath: Regpair used: 0x6c
[ 7.053068] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 7.197952] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7.197965] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7.197967] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 7.197969] pcieport 0000:00:1c.5: [ 0] RxErr (First)
[ 7.246452] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7.246478] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7.246483] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 7.246490] pcieport 0000:00:1c.5: [ 0] RxErr (First)
[ 7.631936] audit: type=1130 audit(1661186068.749:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=netctl@wlp2s0Oliver comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.058831] kauditd_printk_skb: 2 callbacks suppressed
[ 12.058839] audit: type=1131 audit(1661186073.179:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 16.763890] audit: type=1100 audit(1661186077.879:43): pid=463 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=? acct="syn" exe="/usr/bin/login" hostname=archbox addr=? terminal=/dev/tty1 res=failed'
[ 23.917063] audit: type=1131 audit(1661186085.039:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=netctl@wlp2s0Oliver comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 24.575840] audit: type=1100 audit(1661186085.689:45): pid=463 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="syn" exe="/usr/bin/login" hostname=archbox addr=? terminal=/dev/tty1 res=success'
[ 24.577213] audit: type=1101 audit(1661186085.709:46): pid=463 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="syn" exe="/usr/bin/login" hostname=archbox addr=? terminal=/dev/tty1 res=success'
[ 24.579119] audit: type=1103 audit(1661186085.709:47): pid=463 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="syn" exe="/usr/bin/login" hostname=archbox addr=? terminal=/dev/tty1 res=success'
[ 24.579289] audit: type=1006 audit(1661186085.709:48): pid=463 uid=0 old-auid=4294967295 auid=1001 tty=tty1 old-ses=4294967295 ses=1 res=1
[ 24.579303] audit: type=1300 audit(1661186085.709:48): arch=c000003e syscall=1 success=yes exit=4 a0=5 a1=7fff9d50fdc0 a2=4 a3=7fff9d50fad4 items=0 ppid=1 pid=463 auid=1001 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=985 fsgid=0 tty=tty1 ses=1 comm="login" exe="/usr/bin/login" key=(null)
[ 24.579311] audit: type=1327 audit(1661186085.709:48): proctitle=2F62696E2F6C6F67696E002D70002D2D
[ 24.611021] audit: type=1130 audit(1661186085.729:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1001 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 24.615474] audit: type=1101 audit(1661186085.729:50): pid=931 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="syn" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 24.615478] audit: type=1103 audit(1661186085.729:51): pid=931 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="syn" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 36.649946] kauditd_printk_skb: 12 callbacks suppressed
[ 36.649955] audit: type=1131 audit(1661186097.769:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 36.826622] audit: type=1334 audit(1661186097.949:61): prog-id=0 op=UNLOAD
[ 36.826633] audit: type=1334 audit(1661186097.949:62): prog-id=0 op=UNLOAD
[ 36.826640] audit: type=1334 audit(1661186097.949:63): prog-id=0 op=UNLOAD
[ 56.954138] audit: type=1130 audit(1661186118.069:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 58.160719] Bluetooth: RFCOMM TTY layer initialized
[ 58.160738] Bluetooth: RFCOMM socket layer initialized
[ 58.160742] Bluetooth: RFCOMM ver 1.11
[ 72.191534] audit: type=1101 audit(1661186133.309:65): pid=1163 uid=1001 auid=1001 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="syn" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 72.193667] audit: type=1110 audit(1661186133.309:66): pid=1163 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 72.195613] audit: type=1105 audit(1661186133.309:67): pid=1163 uid=1001 auid=1001 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 72.236507] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 72.236533] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 72.236538] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 72.236544] pcieport 0000:00:1c.5: [ 0] RxErr (First)
[ 72.236555] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 72.236566] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 72.276409] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 72.276441] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 72.276448] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000041/00002000
[ 72.276458] pcieport 0000:00:1c.5: [ 0] RxErr (First)
[ 72.276465] pcieport 0000:00:1c.5: [ 6] BadTLP
[ 81.522242] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 81.522255] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 81.522258] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 81.522261] pcieport 0000:00:1c.5: [ 0] RxErr (First)
[ 81.566457] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 81.566489] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 81.566496] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00002041/00002000
[ 81.566505] pcieport 0000:00:1c.5: [ 0] RxErr (First)
[ 81.566512] pcieport 0000:00:1c.5: [ 6] BadTLP
[ 81.923399] audit: type=1130 audit(1661186143.039:68): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=netctl@wlp2s0\x2dLilypad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 86.379230] wlp2s0: authenticate with 3c:7c:3f:30:b5:a4
[ 86.408459] wlp2s0: send auth to 3c:7c:3f:30:b5:a4 (try 1/3)
[ 86.409273] wlp2s0: authenticated
[ 86.416542] wlp2s0: associate with 3c:7c:3f:30:b5:a4 (try 1/3)
[ 86.417918] wlp2s0: RX AssocResp from 3c:7c:3f:30:b5:a4 (capab=0x11 status=0 aid=5)
[ 86.420803] wlp2s0: associated
[ 86.526910] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3c:7c:3f:30:b5:a4
[ 86.647000] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 86.735329] 8021q: 802.1Q VLAN Support v1.8
[ 95.327660] audit: type=1106 audit(1661186156.449:69): pid=1163 uid=1001 auid=1001 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 95.327839] audit: type=1104 audit(1661186156.449:70): pid=1163 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 202.580858] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 202.580875] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 202.580878] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 202.580880] pcieport 0000:00:1c.5: [12] Timeout
[ 216.124860] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 216.124893] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 216.124899] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 216.124906] pcieport 0000:00:1c.5: [12] Timeout
[ 905.565559] audit: type=1130 audit(1661186966.679:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 905.565567] audit: type=1131 audit(1661186966.679:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1530.577021] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 1530.577031] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1530.577033] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 1530.577035] pcieport 0000:00:1c.5: [12] Timeout
[ 1550.757888] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 1550.757896] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1550.757897] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 1550.757899] pcieport 0000:00:1c.5: [12] Timeout
[ 1599.261005] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 1599.261014] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1599.261016] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 1599.261018] pcieport 0000:00:1c.5: [12] Timeout
[ 1853.578364] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 1853.578385] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1853.578390] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 1853.578397] pcieport 0000:00:1c.5: [12] Timeout
[ 2042.349721] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 2042.349728] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 2042.349729] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 2042.349730] pcieport 0000:00:1c.5: [12] Timeout
[ 2051.092344] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 2051.092351] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 2051.092353] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 2051.092354] pcieport 0000:00:1c.5: [12] Timeout
[ 2215.781118] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 2215.781125] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 2215.781126] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 2215.781128] pcieport 0000:00:1c.5: [12] Timeout
[ 2405.512588] audit: type=1334 audit(1661188466.632:73): prog-id=25 op=LOAD
[ 2408.239842] audit: type=1130 audit(1661188469.362:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=updatedb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2408.239863] audit: type=1131 audit(1661188469.362:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=updatedb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2408.444190] audit: type=1334 audit(1661188469.572:76): prog-id=0 op=UNLOAD
[ 2980.029140] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 2980.029153] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 2980.029157] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 2980.029162] pcieport 0000:00:1c.5: [12] Timeout
[ 3049.557339] audit: type=1334 audit(1661189110.682:77): prog-id=26 op=LOAD
[ 3049.557399] audit: type=1334 audit(1661189110.682:78): prog-id=27 op=LOAD
[ 3049.652733] audit: type=1130 audit(1661189110.772:79): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3086.648133] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 3086.648145] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 3086.648148] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 3086.648151] pcieport 0000:00:1c.5: [12] Timeout
[ 3113.983042] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 3113.983051] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 3113.983052] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 3113.983054] pcieport 0000:00:1c.5: [12] Timeout
[ 3308.019995] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 3308.020007] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 3308.020010] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 3308.020014] pcieport 0000:00:1c.5: [12] Timeout
[ 3507.751358] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 3507.751368] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 3507.751370] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 3507.751372] pcieport 0000:00:1c.5: [12] Timeout
[ 3523.811493] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 3523.811499] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 3523.811501] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 3523.811502] pcieport 0000:00:1c.5: [12] Timeout
[ 4403.138796] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 4403.138805] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 4403.138807] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 4403.138810] pcieport 0000:00:1c.5: [12] Timeout
[ 4406.173252] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 4406.173259] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 4406.173261] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 4406.173263] pcieport 0000:00:1c.5: [12] Timeout
[ 4807.109386] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 4807.109394] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 4807.109396] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 4807.109398] pcieport 0000:00:1c.5: [12] Timeout
[ 5231.800145] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 5231.800154] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 5231.800155] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 5231.800158] pcieport 0000:00:1c.5: [12] Timeout
[ 5284.905300] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 5284.905309] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 5284.905310] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 5284.905312] pcieport 0000:00:1c.5: [12] Timeout
[ 5333.428674] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 5333.428692] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 5333.428697] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 5333.428702] pcieport 0000:00:1c.5: [12] Timeout
[ 5482.384071] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 5482.384088] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 5482.384093] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 5482.384097] pcieport 0000:00:1c.5: [12] Timeout
[ 5527.754544] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 5527.754566] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 5527.754573] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 5527.754581] pcieport 0000:00:1c.5: [12] Timeout
[ 5692.837407] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 5692.837416] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 5692.837419] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 5692.837421] pcieport 0000:00:1c.5: [12] Timeout
[ 5822.866272] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 5822.866280] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 5822.866281] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 5822.866283] pcieport 0000:00:1c.5: [12] Timeout
[ 5852.873763] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 5852.873770] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 5852.873772] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 5852.873773] pcieport 0000:00:1c.5: [12] Timeout
[ 5852.913702] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 5852.913710] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 5852.913712] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00003000/00002000
[ 5852.913713] pcieport 0000:00:1c.5: [12] Timeout
[ 6359.663938] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 6359.663947] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 6359.663949] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 6359.663952] pcieport 0000:00:1c.5: [12] Timeout
[ 6573.737713] perf: interrupt took too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 79200
[ 6716.164720] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 6716.164738] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 6716.164744] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 6716.164750] pcieport 0000:00:1c.5: [12] Timeout
[ 6760.701218] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 6760.701238] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 6760.701242] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 6760.701247] pcieport 0000:00:1c.5: [12] Timeout
[ 7314.590650] audit: type=1101 audit(1661193375.729:80): pid=5357 uid=1001 auid=1001 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="syn" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 7327.709125] audit: type=1101 audit(1661193388.849:81): pid=5368 uid=1001 auid=1001 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="syn" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 7327.709977] audit: type=1110 audit(1661193388.849:82): pid=5368 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 7327.710748] audit: type=1105 audit(1661193388.849:83): pid=5368 uid=1001 auid=1001 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 7327.947784] audit: type=1106 audit(1661193389.089:84): pid=5368 uid=1001 auid=1001 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 7327.947789] audit: type=1104 audit(1661193389.089:85): pid=5368 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 7410.449438] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7410.449460] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 7410.449466] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 7410.449472] pcieport 0000:00:1c.5: [12] Timeout
[ 7527.367754] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7527.367768] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 7527.367773] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001000/00002000
[ 7527.367777] pcieport 0000:00:1c.5: [12] Timeout
[ 8022.683120] audit: type=1101 audit(1661194083.810:86): pid=5640 uid=1001 auid=1001 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="syn" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8022.683824] audit: type=1110 audit(1661194083.810:87): pid=5640 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8022.684378] audit: type=1105 audit(1661194083.810:88): pid=5640 uid=1001 auid=1001 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8026.170454] audit: type=1334 audit(1661194087.300:89): prog-id=28 op=LOAD
[ 8026.170459] audit: type=1334 audit(1661194087.300:90): prog-id=0 op=UNLOAD
[ 8026.171756] audit: type=1334 audit(1661194087.300:91): prog-id=29 op=LOAD
[ 8026.171765] audit: type=1334 audit(1661194087.300:92): prog-id=0 op=UNLOAD
[ 8026.171892] audit: type=1334 audit(1661194087.300:93): prog-id=30 op=LOAD
[ 8026.171922] audit: type=1334 audit(1661194087.300:94): prog-id=31 op=LOAD
[ 8026.171932] audit: type=1334 audit(1661194087.300:95): prog-id=0 op=UNLOAD
[ 8034.514833] kauditd_printk_skb: 19 callbacks suppressed
[ 8034.514850] audit: type=1101 audit(1661194095.640:115): pid=5695 uid=1001 auid=1001 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="syn" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8034.517129] audit: type=1110 audit(1661194095.650:116): pid=5695 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8034.518888] audit: type=1105 audit(1661194095.650:117): pid=5695 uid=1001 auid=1001 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8035.037538] audit: type=1106 audit(1661194096.170:118): pid=5695 uid=1001 auid=1001 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8035.037678] audit: type=1104 audit(1661194096.170:119): pid=5695 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8087.367847] audit: type=1101 audit(1661194148.500:120): pid=5714 uid=1001 auid=1001 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="syn" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8087.368498] audit: type=1110 audit(1661194148.500:121): pid=5714 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8087.369025] audit: type=1105 audit(1661194148.500:122): pid=5714 uid=1001 auid=1001 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8087.391730] audit: type=1106 audit(1661194148.520:123): pid=5714 uid=1001 auid=1001 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8087.391735] audit: type=1104 audit(1661194148.520:124): pid=5714 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8126.747834] audit: type=1101 audit(1661194187.880:125): pid=5726 uid=1001 auid=1001 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="syn" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8126.748455] audit: type=1110 audit(1661194187.880:126): pid=5726 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8126.749004] audit: type=1105 audit(1661194187.880:127): pid=5726 uid=1001 auid=1001 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8126.763091] audit: type=1106 audit(1661194187.890:128): pid=5726 uid=1001 auid=1001 ses=1 msg='op=PAM:session_close grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8126.763094] audit: type=1104 audit(1661194187.890:129): pid=5726 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8904.338380] audit: type=1101 audit(1661194965.473:130): pid=5851 uid=1001 auid=1001 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="syn" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8904.338994] audit: type=1110 audit(1661194965.473:131): pid=5851 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[ 8904.339586] audit: type=1105 audit(1661194965.473:132): pid=5851 uid=1001 auid=1001 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'Offline
#10 2022-08-22 19:28:30
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,494
Re: Cant access/find an extra internal hard drive (that may not exist)
"Plenty"
[ 0.365871] ata1: SATA max UDMA/133 abar m2048@0xd1333000 port 0xd1333100 irq 124
[ 0.699883] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.701409] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 0.701419] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.701424] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.701561] ata1.00: failed to read native max address (err_mask=0x1)
[ 0.701568] ata1.00: HPA support seems broken, skipping HPA handling
[ 0.701572] ata1.00: ATA-8: ST1000LM035-1RK172, SDM3, max UDMA/133
[ 0.701577] ata1.00: 18446744073709551615 sectors, multi 16: LBA48 NCQ (depth 32)
[ 0.703126] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 0.703135] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.703141] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.703154] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.806836] ata1.00: Read log 0x10 page 0x00 failed, Emask 0x1
[ 0.806846] ata1: failed to read log page 10h (errno=-5)
[ 0.806857] ata1.00: exception Emask 0x1 SAct 0x400000 SErr 0x0 action 0x0
[ 0.806862] ata1.00: irq_stat 0x40000001
[ 0.806873] ata1.00: failed command: READ FPDMA QUEUED
[ 0.806875] ata1.00: cmd 60/08:b0:00:00:00/00:00:00:00:00/40 tag 22 ncq dma 4096 in
[ 0.806886] ata1.00: status: { DRDY ERR }
[ 0.806889] ata1.00: error: { ABRT }
[ 0.807375] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.807401] ata1: EH complete
[ 0.846529] ata1.00: Read log 0x10 page 0x00 failed, Emask 0x1
[ 0.846534] ata1: failed to read log page 10h (errno=-5)
[ 0.846537] ata1.00: NCQ disabled due to excessive errors
[ 0.846539] ata1.00: exception Emask 0x1 SAct 0x100 SErr 0x0 action 0x0
[ 0.846542] ata1.00: irq_stat 0x40000001
[ 0.846545] ata1.00: failed command: READ FPDMA QUEUED
[ 0.846546] ata1.00: cmd 60/08:40:00:00:00/00:00:00:00:00/40 tag 8 ncq dma 4096 in
[ 0.846554] ata1.00: status: { DRDY ERR }
[ 0.846556] ata1.00: error: { ABRT }
[ 0.846909] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.846928] ata1: EH complete
[ 0.886479] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 0.886492] ata1.00: irq_stat 0x40000001
[ 0.886497] ata1.00: failed command: READ DMA
[ 0.886500] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 9 dma 4096 in
[ 0.886514] ata1.00: status: { DRDY ERR }
[ 0.886518] ata1.00: error: { ABRT }
[ 0.886846] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.886870] ata1: EH complete
[ 0.956525] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 0.956534] ata1.00: irq_stat 0x40000001
[ 0.956537] ata1.00: failed command: READ DMA
[ 0.956539] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 10 dma 4096 in
[ 0.956548] ata1.00: status: { DRDY ERR }
[ 0.956551] ata1.00: error: { ABRT }
[ 0.956976] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.956999] ata1: EH complete
[ 0.996452] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 0.996456] ata1.00: irq_stat 0x40000001
[ 0.996458] ata1.00: failed command: READ DMA
[ 0.996460] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 11 dma 4096 in
[ 0.996468] ata1.00: status: { DRDY ERR }
[ 0.996470] ata1.00: error: { ABRT }
[ 0.996756] ata1.00: configured for UDMA/133 (device error ignored)
[ 0.996767] ata1: EH complete
[ 1.036523] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.036530] ata1.00: irq_stat 0x40000001
[ 1.036533] ata1.00: failed command: READ DMA
[ 1.036535] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 12 dma 4096 in
[ 1.036543] ata1.00: status: { DRDY ERR }
[ 1.036545] ata1.00: error: { ABRT }
[ 1.036987] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.037075] ata1: EH complete
[ 1.096464] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.096473] ata1.00: irq_stat 0x40000001
[ 1.096476] ata1.00: failed command: READ DMA
[ 1.096478] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 23 dma 4096 in
[ 1.096487] ata1.00: status: { DRDY ERR }
[ 1.096490] ata1.00: error: { ABRT }
[ 1.096977] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.097002] ata1: EH complete
[ 1.156481] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.156491] ata1.00: irq_stat 0x40000001
[ 1.156494] ata1.00: failed command: READ DMA
[ 1.156497] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 13 dma 4096 in
[ 1.156507] ata1.00: status: { DRDY ERR }
[ 1.156510] ata1.00: error: { ABRT }
[ 1.156789] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.156827] ata1: EH complete
[ 1.196477] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.196487] ata1.00: irq_stat 0x40000001
[ 1.196491] ata1.00: failed command: READ DMA
[ 1.196494] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 1.196504] ata1.00: status: { DRDY ERR }
[ 1.196507] ata1.00: error: { ABRT }
[ 1.196781] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.196807] ata1: EH complete
[ 1.236466] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.236474] ata1.00: irq_stat 0x40000001
[ 1.236478] ata1.00: failed command: READ DMA
[ 1.236480] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 1 dma 4096 in
[ 1.236489] ata1.00: status: { DRDY ERR }
[ 1.236491] ata1.00: error: { ABRT }
[ 1.236754] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.236777] ata1: EH complete
[ 1.296476] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.296484] ata1.00: irq_stat 0x40000001
[ 1.296488] ata1.00: failed command: READ DMA
[ 1.296490] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 2 dma 4096 in
[ 1.296500] ata1.00: status: { DRDY ERR }
[ 1.296503] ata1.00: error: { ABRT }
[ 1.296781] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.296805] ata1: EH complete
[ 1.336487] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.336497] ata1.00: irq_stat 0x40000001
[ 1.336500] ata1.00: failed command: READ DMA
[ 1.336503] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 3 dma 4096 in
[ 1.336512] ata1.00: status: { DRDY ERR }
[ 1.336515] ata1.00: error: { ABRT }
[ 1.336786] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.336880] ata1: EH complete
[ 1.416418] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.416424] ata1.00: irq_stat 0x40000001
[ 1.416427] ata1.00: failed command: READ DMA
[ 1.416429] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 24 dma 4096 in
[ 1.416437] ata1.00: status: { DRDY ERR }
[ 1.416439] ata1.00: error: { ABRT }
[ 1.416686] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.416705] ata1: EH complete
[ 1.456362] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.456368] ata1.00: irq_stat 0x40000001
[ 1.456371] ata1.00: failed command: READ DMA
[ 1.456373] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 4 dma 4096 in
[ 1.456381] ata1.00: status: { DRDY ERR }
[ 1.456383] ata1.00: error: { ABRT }
[ 1.456575] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.456593] ata1: EH complete
[ 1.496485] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.496494] ata1.00: irq_stat 0x40000001
[ 1.496497] ata1.00: failed command: READ DMA
[ 1.496499] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 5 dma 4096 in
[ 1.496508] ata1.00: status: { DRDY ERR }
[ 1.496511] ata1.00: error: { ABRT }
[ 1.496789] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.496815] ata1: EH complete
[ 1.536467] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.536476] ata1.00: irq_stat 0x40000001
[ 1.536480] ata1.00: failed command: READ DMA
[ 1.536483] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 6 dma 4096 in
[ 1.536493] ata1.00: status: { DRDY ERR }
[ 1.536496] ata1.00: error: { ABRT }
[ 1.536761] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.536788] ata1: EH complete
[ 1.576472] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.576481] ata1.00: irq_stat 0x40000001
[ 1.576485] ata1.00: failed command: READ DMA
[ 1.576487] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 7 dma 4096 in
[ 1.576497] ata1.00: status: { DRDY ERR }
[ 1.576500] ata1.00: error: { ABRT }
[ 1.576788] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.576812] ata1: EH complete
[ 1.636475] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.636484] ata1.00: irq_stat 0x40000001
[ 1.636488] ata1.00: failed command: READ DMA
[ 1.636490] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 14 dma 4096 in
[ 1.636499] ata1.00: status: { DRDY ERR }
[ 1.636502] ata1.00: error: { ABRT }
[ 1.636784] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.636875] ata1: EH complete
[ 1.696522] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.696531] ata1.00: irq_stat 0x40000001
[ 1.696535] ata1.00: failed command: READ DMA
[ 1.696537] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 25 dma 4096 in
[ 1.696547] ata1.00: status: { DRDY ERR }
[ 1.696550] ata1.00: error: { ABRT }
[ 1.696826] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.696855] ata1: EH complete
[ 1.736479] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.736488] ata1.00: irq_stat 0x40000001
[ 1.736492] ata1.00: failed command: READ DMA
[ 1.736494] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 15 dma 4096 in
[ 1.736504] ata1.00: status: { DRDY ERR }
[ 1.736507] ata1.00: error: { ABRT }
[ 1.736782] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.736807] ata1: EH complete
[ 1.776473] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.776481] ata1.00: irq_stat 0x40000001
[ 1.776485] ata1.00: failed command: READ DMA
[ 1.776488] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 16 dma 4096 in
[ 1.776497] ata1.00: status: { DRDY ERR }
[ 1.776500] ata1.00: error: { ABRT }
[ 1.776783] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.776807] ata1: EH complete
[ 1.816474] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.816483] ata1.00: irq_stat 0x40000001
[ 1.816487] ata1.00: failed command: READ DMA
[ 1.816489] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 17 dma 4096 in
[ 1.816499] ata1.00: status: { DRDY ERR }
[ 1.816502] ata1.00: error: { ABRT }
[ 1.816775] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.816799] ata1: EH complete
[ 1.856470] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.856479] ata1.00: irq_stat 0x40000001
[ 1.856483] ata1.00: failed command: READ DMA
[ 1.856485] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 18 dma 4096 in
[ 1.856495] ata1.00: status: { DRDY ERR }
[ 1.856498] ata1.00: error: { ABRT }
[ 1.856774] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.856813] ata1: EH complete
[ 1.896484] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.896494] ata1.00: irq_stat 0x40000001
[ 1.896498] ata1.00: failed command: READ DMA
[ 1.896501] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 19 dma 4096 in
[ 1.896511] ata1.00: status: { DRDY ERR }
[ 1.896515] ata1.00: error: { ABRT }
[ 1.896809] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.896919] ata1: EH complete
[ 1.956525] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.956535] ata1.00: irq_stat 0x40000001
[ 1.956539] ata1.00: failed command: READ DMA
[ 1.956542] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 26 dma 4096 in
[ 1.956552] ata1.00: status: { DRDY ERR }
[ 1.956556] ata1.00: error: { ABRT }
[ 1.956829] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.956855] ata1: EH complete
[ 1.996468] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.996477] ata1.00: irq_stat 0x40000001
[ 1.996482] ata1.00: failed command: READ DMA
[ 1.996484] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 20 dma 4096 in
[ 1.996494] ata1.00: status: { DRDY ERR }
[ 1.996498] ata1.00: error: { ABRT }
[ 1.996765] ata1.00: configured for UDMA/133 (device error ignored)
[ 1.996791] ata1: EH complete
[ 2.036476] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2.036485] ata1.00: irq_stat 0x40000001
[ 2.036490] ata1.00: failed command: READ DMA
[ 2.036492] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 21 dma 4096 in
[ 2.036503] ata1.00: status: { DRDY ERR }
[ 2.036506] ata1.00: error: { ABRT }
[ 2.036783] ata1.00: configured for UDMA/133 (device error ignored)
[ 2.036809] ata1: EH complete
[ 2.076469] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2.076479] ata1.00: irq_stat 0x40000001
[ 2.076483] ata1.00: failed command: READ DMA
[ 2.076486] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 22 dma 4096 in
[ 2.076497] ata1.00: status: { DRDY ERR }
[ 2.076500] ata1.00: error: { ABRT }
[ 2.076795] ata1.00: configured for UDMA/133 (device error ignored)
[ 2.076821] ata1: EH complete
[ 2.116481] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2.116490] ata1.00: irq_stat 0x40000001
[ 2.116495] ata1.00: failed command: READ DMA
[ 2.116497] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 23 dma 4096 in
[ 2.116507] ata1.00: status: { DRDY ERR }
[ 2.116510] ata1.00: error: { ABRT }
[ 2.116786] ata1.00: configured for UDMA/133 (device error ignored)
[ 2.116812] ata1: EH complete
[ 2.156471] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2.156481] ata1.00: irq_stat 0x40000001
[ 2.156485] ata1.00: failed command: READ DMA
[ 2.156487] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 27 dma 4096 in
[ 2.156498] ata1.00: status: { DRDY ERR }
[ 2.156501] ata1.00: error: { ABRT }
[ 2.156768] ata1.00: configured for UDMA/133 (device error ignored)
[ 2.156886] ata1: EH completeThere's also a bunch of ACPI and PCI errors - notebooks get thrown around alot, what can get connections to come loose.
Could be power or bus.
You could first try a different SW stack (live distro with an older kernel) but I'd not hold my breath about this being a software issue. It's likely either the connection or the drive is toast.
I have a laptop that I believe has another 500gb internal harddrive. … I'm actually not sure since I don't know the hardware of this machine.
What's the origin of the device? The SSD has ~1y uptime, have you always owened it?
Offline
#11 2022-08-22 19:40:31
- synftw
- Member
- Registered: 2017-02-03
- Posts: 22
Re: Cant access/find an extra internal hard drive (that may not exist)
seth wrote:
"Plenty"
There's also a bunch of ACPI and PCI errors - notebooks get thrown around alot, what can get connections to come loose.
Could be power or bus.You could first try a different SW stack (live distro with an older kernel) but I'd not hold my breath about this being a software issue. It's likely either the connection or the drive is toast.
I have a laptop that I believe has another 500gb internal harddrive. … I'm actually not sure since I don't know the hardware of this machine.
What's the origin of the device? The SSD has ~1y uptime, have you always owened it?
I've always owned it. I installed arch forever ago and it hasn't been my primary machine. I never properly configured it but it's now a project of mine. It has been dropped which caused me to have to replace a broken screen so I'm guessing the HDD is toast from that fall while the SSD survived. I'll check the bus. If it does look good, do you think I'm clear to swap the drive without worry, one-for-one?
Offline
#12 2022-08-22 19:59:07
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,494
Re: Cant access/find an extra internal hard drive (that may not exist)
If the head had kissed the discs you'd get other errors. This is the controller and save overheating, some connection is gonna fail much easier than that chip.
You should take a look there (maybe test the drive in another device or using an usb adapter?)
Offline
#13 2022-08-22 20:04:16
- synftw
- Member
- Registered: 2017-02-03
- Posts: 22
Re: Cant access/find an extra internal hard drive (that may not exist)
seth wrote:
If the head had kissed the discs you'd get other errors. This is the controller and save overheating, some connection is gonna fail much easier than that chip.
You should take a look there (maybe test the drive in another device or using an usb adapter?)
I do have a case to convert an internal to an external so I'll try that to isolate the disc away from the bus. Thanks so much for your help. I learned about some utilities I wasn't aware of. I really appreciate you and this community.
Last edited by synftw (2022-08-22 20:04:45)
Offline