You are not logged in.

#1 2022-10-06 14:10:45

a1n_s0ph
Member
Registered: 2020-03-19
Posts: 4

Can't get 1920x1080 screen resolution on primary monitor after pluggin

Hello all,

I would like some help regarding an issue I am having with my dual monitor setup.

I got a new laptop from work, and because it only had HDMI female plugs, i had to by a VGA-to-HDMI adaptor so I could use an extra monitor. The monitors are old so one is running on one VGA port and the other has one VGA and one DVI-I port.

My desktop was connected with the two monitors with a VGA cable (that monitor served as my primary) and the DVI-I cable respectively.


I thought of buying a Konig VGA switch in order to avoid constant unplugging and change of cables and now I run into this issue:


When i switch into the Arch VGA cable, i can't get the proper 1920x1080 resolution I had when i plugged it directly to the desktop rather I get 1024x768 max. The Windows input (from the laptop) works just fine so I don't think that the switch doesn't support 1920x1080.


Also the KDE display settings manager now lists the screen as VGA-1 rather the monitors model name, when it was plugged in directly.


What could be the cause of this issue?

Offline

#2 2022-10-06 15:08:04

seth
Member
Registered: 2012-09-03
Posts: 49,951

Re: Can't get 1920x1080 screen resolution on primary monitor after pluggin

Offline

#3 2022-10-06 16:03:15

a1n_s0ph
Member
Registered: 2020-03-19
Posts: 4

Re: Can't get 1920x1080 screen resolution on primary monitor after pluggin

Hello, the output of xorg.log i think is this

[    20.815] 
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[    20.815] Current Operating System: Linux arch-wn 5.19.13-arch1-1 #1 SMP PREEMPT_DYNAMIC Tue, 04 Oct 2022 14:36:58 +0000 x86_64
[    20.815] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5f9eabd0-6ba0-41f5-9740-dd09c1ead06d rw loglevel=3 quiet
[    20.815]  
[    20.815] Current version of pixman: 0.40.0
[    20.815]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    20.815] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.815] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct  6 18:48:28 2022
[    20.819] (==) Using config file: "/etc/X11/xorg.conf"
[    20.819] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    20.819] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.822] (==) ServerLayout "X.org Configured"
[    20.822] (**) |-->Screen "Screen0" (0)
[    20.822] (**) |   |-->Monitor "Monitor0"
[    20.822] (**) |   |-->Device "Card0"
[    20.822] (**) |-->Input Device "Mouse0"
[    20.822] (**) |-->Input Device "Keyboard0"
[    20.822] (==) Automatically adding devices
[    20.822] (==) Automatically enabling devices
[    20.822] (==) Automatically adding GPU devices
[    20.822] (==) Automatically binding GPU devices
[    20.822] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    20.826] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    20.826]    Entry deleted from font path.
[    20.826] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    20.826]    Entry deleted from font path.
[    20.829] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    20.829]    Entry deleted from font path.
[    20.829] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    20.829]    Entry deleted from font path.
[    20.829] (**) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/TTF,
        /usr/share/fonts/100dpi,
        /usr/share/fonts/75dpi,
        /usr/share/fonts/misc,
        /usr/share/fonts/TTF,
        /usr/share/fonts/100dpi,
        /usr/share/fonts/75dpi
[    20.829] (**) ModulePath set to "/usr/lib/xorg/modules"
[    20.829] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    20.829] (WW) Disabling Mouse0
[    20.829] (WW) Disabling Keyboard0
[    20.829] (II) Module ABI versions:
[    20.829]    X.Org ANSI C Emulation: 0.4
[    20.829]    X.Org Video Driver: 25.2
[    20.829]    X.Org XInput driver : 24.4
[    20.829]    X.Org Server Extension : 10.0
[    20.830] (++) using VT number 1

[    20.830] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    20.831] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.831] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0/drm/card0
[    20.838] (--) PCI:*(1@0:0:0) 10de:0a20:0000:0000 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/131072
[    20.838] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    20.838] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    20.838] (II) LoadModule: "glx"
[    20.842] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.859] (II) Module glx: vendor="X.Org Foundation"
[    20.859]    compiled for 1.21.1.4, module version = 1.0.0
[    20.859]    ABI class: X.Org Server Extension, version 10.0
[    20.859] (II) LoadModule: "nouveau"
[    20.859] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    20.862] (II) Module nouveau: vendor="X.Org Foundation"
[    20.862]    compiled for 1.21.1.1, module version = 1.0.17
[    20.862]    Module class: X.Org Video Driver
[    20.862]    ABI class: X.Org Video Driver, version 25.2
[    20.863] (II) NOUVEAU driver 
[    20.863] (II) NOUVEAU driver for NVIDIA chipset families :
[    20.863]    RIVA TNT            (NV04)
[    20.863]    RIVA TNT2           (NV05)
[    20.863]    GeForce 256         (NV10)
[    20.863]    GeForce 2           (NV11, NV15)
[    20.863]    GeForce 4MX         (NV17, NV18)
[    20.863]    GeForce 3           (NV20)
[    20.863]    GeForce 4Ti         (NV25, NV28)
[    20.863]    GeForce FX          (NV3x)
[    20.863]    GeForce 6           (NV4x)
[    20.863]    GeForce 7           (G7x)
[    20.863]    GeForce 8           (G8x)
[    20.863]    GeForce 9           (G9x)
[    20.863]    GeForce GTX 2xx/3xx (GT2xx)
[    20.863]    GeForce GTX 4xx/5xx (GFxxx)
[    20.863]    GeForce GTX 6xx/7xx (GKxxx)
[    20.863]    GeForce GTX 9xx     (GMxxx)
[    20.863]    GeForce GTX 10xx    (GPxxx)
[    20.863] (II) [drm] nouveau interface version: 1.3.1
[    20.864] (II) Loading sub module "dri2"
[    20.864] (II) LoadModule: "dri2"
[    20.864] (II) Module "dri2" already built-in
[    20.864] (--) NOUVEAU(0): Chipset: "NVIDIA NVA5"
[    20.864] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    20.864] (==) NOUVEAU(0): RGB weight 888
[    20.864] (==) NOUVEAU(0): Default visual is TrueColor
[    20.864] (==) NOUVEAU(0): Using HW cursor
[    20.864] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[    20.864] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    20.864] (==) NOUVEAU(0): Page flipping enabled
[    20.864] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[    20.864] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[    20.864] (II) NOUVEAU(0): Initializing outputs ...
[    20.893] (II) NOUVEAU(0): Output DVI-I-1 using monitor section DVI-I-1
[    20.893] (**) NOUVEAU(0): Option "LeftOf" "VGA-1"
[    20.915] (II) NOUVEAU(0): Output VGA-1 using monitor section VGA-1
[    20.915] (**) NOUVEAU(0): Option "RightOf" "DVI-I-1"
[    20.915] (**) NOUVEAU(0): Option "Primary" "true"
[    20.916] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    20.916] (II) NOUVEAU(0): 3 crtcs needed for screen.
[    20.917] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    20.917] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    20.948] (II) NOUVEAU(0): EDID for output VGA-1
[    20.948] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    20.948] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    20.948] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    20.948] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    20.948] (II) NOUVEAU(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    20.948] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    20.978] (II) NOUVEAU(0): EDID for output DVI-I-1
[    20.978] (II) NOUVEAU(0): Manufacturer: LEN  Model: 4bd9  Serial#: 16843009
[    20.978] (II) NOUVEAU(0): Year: 2008  Week: 2
[    20.978] (II) NOUVEAU(0): EDID Version: 1.3
[    20.978] (II) NOUVEAU(0): Digital Display Input
[    20.978] (II) NOUVEAU(0): DFP 1.x compatible TMDS
[    20.978] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 36  vert.: 30
[    20.978] (II) NOUVEAU(0): Gamma: 2.20
[    20.978] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[    20.978] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    20.978] (II) NOUVEAU(0): Default color space is primary color space
[    20.978] (II) NOUVEAU(0): First detailed timing is preferred mode
[    20.978] (II) NOUVEAU(0): redX: 0.650 redY: 0.330   greenX: 0.300 greenY: 0.600
[    20.978] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    20.978] (II) NOUVEAU(0): Supported established timings:
[    20.978] (II) NOUVEAU(0): 720x400@70Hz
[    20.978] (II) NOUVEAU(0): 640x480@60Hz
[    20.978] (II) NOUVEAU(0): 640x480@67Hz
[    20.978] (II) NOUVEAU(0): 640x480@72Hz
[    20.978] (II) NOUVEAU(0): 640x480@75Hz
[    20.978] (II) NOUVEAU(0): 800x600@60Hz
[    20.978] (II) NOUVEAU(0): 800x600@72Hz
[    20.978] (II) NOUVEAU(0): 800x600@75Hz
[    20.978] (II) NOUVEAU(0): 1024x768@60Hz
[    20.978] (II) NOUVEAU(0): 1024x768@70Hz
[    20.978] (II) NOUVEAU(0): 1024x768@75Hz
[    20.978] (II) NOUVEAU(0): 1280x1024@75Hz
[    20.978] (II) NOUVEAU(0): Manufacturer's mask: 0
[    20.978] (II) NOUVEAU(0): Supported standard timings:
[    20.978] (II) NOUVEAU(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    20.978] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 70  vid: 35457
[    20.978] (II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
[    20.978] (II) NOUVEAU(0): #3: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
[    20.978] (II) NOUVEAU(0): Supported detailed timing:
[    20.978] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[    20.978] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    20.978] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    20.978] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[    20.978] (II) NOUVEAU(0): Monitor name: LEN L171p
[    20.978] (II) NOUVEAU(0): Serial No: VL-NMG56
[    20.978] (II) NOUVEAU(0): EDID (in hex):
[    20.978] (II) NOUVEAU(0):   00ffffffffffff0030aed94b01010101
[    20.978] (II) NOUVEAU(0):   0212010381241e78eeaea5a6544c9926
[    20.978] (II) NOUVEAU(0):   145054bdcf008180818a818c81900101
[    20.978] (II) NOUVEAU(0):   010101010101302a009851002a403070
[    20.978] (II) NOUVEAU(0):   1300520e1100001e000000fd00384c1e
[    20.978] (II) NOUVEAU(0):   510e000a202020202020000000fc004c
[    20.978] (II) NOUVEAU(0):   454e204c313731700a202020000000ff
[    20.978] (II) NOUVEAU(0):   00564c2d4e4d4735360a2020202000db
[    20.978] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    20.978] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    20.978] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    20.978] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    20.978] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    20.978] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    20.978] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    20.978] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    20.978] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    20.978] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    20.978] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    20.978] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    20.978] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    20.978] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    20.979] (II) NOUVEAU(0): EDID for output HDMI-1
[    20.979] (II) NOUVEAU(0): Output VGA-1 connected
[    20.979] (II) NOUVEAU(0): Output DVI-I-1 connected
[    20.979] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    20.979] (II) NOUVEAU(0): Using user preference for initial modes
[    20.979] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768 +0+0
[    20.979] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1280x1024 +0+0
[    20.979] (EE) NOUVEAU(0): Output position loop. Moving VGA-1 to 0,0
[    20.979] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[    20.979] (II) NOUVEAU(0): Virtual size is 2304x1024 (pitch 0)
[    20.979] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    20.979] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    20.979] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    20.979] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    20.979] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    20.979] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    20.979] (**) NOUVEAU(0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    20.979] (II) NOUVEAU(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    20.979] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    20.979] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    20.979] (==) NOUVEAU(0): DPI set to (96, 96)
[    20.980] (II) Loading sub module "fb"
[    20.980] (II) LoadModule: "fb"
[    20.980] (II) Module "fb" already built-in
[    20.980] (II) Loading sub module "shadowfb"
[    20.980] (II) LoadModule: "shadowfb"
[    20.980] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    20.980] (II) Module shadowfb: vendor="X.Org Foundation"
[    20.980]    compiled for 1.21.1.4, module version = 1.0.0
[    20.980]    ABI class: X.Org ANSI C Emulation, version 0.4
[    20.982] (II) NOUVEAU(0): Channel setup complete.
[    20.983] (II) NOUVEAU(0): [COPY] async initialised.
[    20.985] (II) NOUVEAU(0): Hardware support for Present enabled
[    20.986] (II) NOUVEAU(0): [DRI2] Setup complete
[    20.986] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    20.986] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    20.986] (II) Loading sub module "exa"
[    20.986] (II) LoadModule: "exa"
[    20.986] (II) Loading /usr/lib/xorg/modules/libexa.so
[    20.987] (II) Module exa: vendor="X.Org Foundation"
[    20.987]    compiled for 1.21.1.4, module version = 2.6.0
[    20.987]    ABI class: X.Org Video Driver, version 25.2
[    20.988] (II) EXA(0): Driver allocated offscreen pixmaps
[    20.988] (II) EXA(0): Driver registered support for the following operations:
[    20.988] (II)         Solid
[    20.988] (II)         Copy
[    20.988] (II)         Composite (RENDER acceleration)
[    20.988] (II)         UploadToScreen
[    20.988] (II)         DownloadFromScreen
[    20.988] (==) NOUVEAU(0): Backing store enabled
[    20.988] (==) NOUVEAU(0): Silken mouse enabled
[    20.988] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    20.988] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    20.988] (==) NOUVEAU(0): DPMS enabled
[    20.989] (II) Initializing extension Generic Event Extension
[    20.989] (II) Initializing extension SHAPE
[    20.989] (II) Initializing extension MIT-SHM
[    20.989] (II) Initializing extension XInputExtension
[    20.989] (II) Initializing extension XTEST
[    20.990] (II) Initializing extension BIG-REQUESTS
[    20.990] (II) Initializing extension SYNC
[    20.990] (II) Initializing extension XKEYBOARD
[    20.990] (II) Initializing extension XC-MISC
[    20.990] (II) Initializing extension SECURITY
[    20.990] (II) Initializing extension XFIXES
[    20.990] (II) Initializing extension RENDER
[    20.991] (II) Initializing extension RANDR
[    20.991] (II) Initializing extension COMPOSITE
[    20.991] (II) Initializing extension DAMAGE
[    20.991] (II) Initializing extension MIT-SCREEN-SAVER
[    20.991] (II) Initializing extension DOUBLE-BUFFER
[    20.991] (II) Initializing extension RECORD
[    20.991] (II) Initializing extension DPMS
[    20.992] (II) Initializing extension Present
[    20.992] (II) Initializing extension DRI3
[    20.992] (II) Initializing extension X-Resource
[    20.992] (II) Initializing extension XVideo
[    20.992] (II) Initializing extension XVideo-MotionCompensation
[    20.992] (II) Initializing extension GLX
[    21.399] (II) AIGLX: Loaded and initialized nouveau
[    21.399] (II) GLX: Initialized DRI2 GL provider for screen 0
[    21.399] (II) Initializing extension XFree86-VidModeExtension
[    21.399] (II) Initializing extension XFree86-DGA
[    21.399] (II) Initializing extension XFree86-DRI
[    21.399] (II) Initializing extension DRI2
[    21.401] (II) NOUVEAU(0): NVEnterVT is called.
[    21.500] (II) NOUVEAU(0): Setting screen physical size to 609 x 270
[    21.500] resize called 2304 1024
[    21.740] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    21.740] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    21.740] (**) Power Button: Applying InputClass "system-keyboard"
[    21.740] (II) LoadModule: "libinput"
[    21.740] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    21.747] (II) Module libinput: vendor="X.Org Foundation"
[    21.747]    compiled for 1.21.1.3, module version = 1.2.1
[    21.747]    Module class: X.Org XInput Driver
[    21.747]    ABI class: X.Org XInput driver, version 24.4
[    21.747] (II) Using input driver 'libinput' for 'Power Button'
[    21.747] (**) Power Button: always reports core events
[    21.747] (**) Option "Device" "/dev/input/event1"
[    21.765] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    21.765] (II) event1  - Power Button: device is a keyboard
[    21.765] (II) event1  - Power Button: device removed
[    21.817] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    21.817] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    21.817] (**) Option "xkb_layout" "us,gr"
[    21.817] (**) Option "xkb_variant" "qwerty"
[    21.817] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    21.856] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    21.856] (II) event1  - Power Button: device is a keyboard
[    21.857] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    21.857] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    21.857] (**) Power Button: Applying InputClass "system-keyboard"
[    21.857] (II) Using input driver 'libinput' for 'Power Button'
[    21.857] (**) Power Button: always reports core events
[    21.857] (**) Option "Device" "/dev/input/event0"
[    21.858] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    21.858] (II) event0  - Power Button: device is a keyboard
[    21.858] (II) event0  - Power Button: device removed
[    21.901] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    21.901] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    21.901] (**) Option "xkb_layout" "us,gr"
[    21.901] (**) Option "xkb_variant" "qwerty"
[    21.901] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    21.902] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    21.902] (II) event0  - Power Button: device is a keyboard
[    21.903] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[    21.903] (II) No input driver specified, ignoring this device.
[    21.903] (II) This device may have been added with another device file.
[    21.904] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[    21.904] (II) No input driver specified, ignoring this device.
[    21.904] (II) This device may have been added with another device file.
[    21.904] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[    21.904] (II) No input driver specified, ignoring this device.
[    21.904] (II) This device may have been added with another device file.
[    21.905] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[    21.905] (II) No input driver specified, ignoring this device.
[    21.905] (II) This device may have been added with another device file.
[    21.905] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event12)
[    21.905] (II) No input driver specified, ignoring this device.
[    21.905] (II) This device may have been added with another device file.
[    21.906] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event13)
[    21.906] (II) No input driver specified, ignoring this device.
[    21.906] (II) This device may have been added with another device file.
[    21.906] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event14)
[    21.906] (II) No input driver specified, ignoring this device.
[    21.906] (II) This device may have been added with another device file.
[    21.907] (II) config/udev: Adding input device HDA Intel MID Line Out (/dev/input/event15)
[    21.907] (II) No input driver specified, ignoring this device.
[    21.907] (II) This device may have been added with another device file.
[    21.908] (II) config/udev: Adding input device USB OPTICAL MOUSE  (/dev/input/event2)
[    21.908] (**) USB OPTICAL MOUSE : Applying InputClass "libinput pointer catchall"
[    21.908] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE '
[    21.908] (**) USB OPTICAL MOUSE : always reports core events
[    21.908] (**) Option "Device" "/dev/input/event2"
[    21.967] (II) event2  - USB OPTICAL MOUSE : is tagged by udev as: Mouse
[    21.967] (II) event2  - USB OPTICAL MOUSE : device is a pointer
[    21.968] (II) event2  - USB OPTICAL MOUSE : device removed
[    22.017] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-1/9-1:1.0/0003:18F8:0F99.0001/input/input2/event2"
[    22.017] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE " (type: MOUSE, id 8)
[    22.018] (**) Option "AccelerationScheme" "none"
[    22.018] (**) USB OPTICAL MOUSE : (accel) selected scheme none/0
[    22.018] (**) USB OPTICAL MOUSE : (accel) acceleration factor: 2.000
[    22.018] (**) USB OPTICAL MOUSE : (accel) acceleration threshold: 4
[    22.077] (II) event2  - USB OPTICAL MOUSE : is tagged by udev as: Mouse
[    22.077] (II) event2  - USB OPTICAL MOUSE : device is a pointer
[    22.079] (II) config/udev: Adding input device USB OPTICAL MOUSE  (/dev/input/mouse0)
[    22.080] (II) No input driver specified, ignoring this device.
[    22.080] (II) This device may have been added with another device file.
[    22.082] (II) config/udev: Adding input device USB OPTICAL MOUSE  Keyboard (/dev/input/event3)
[    22.082] (**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "libinput keyboard catchall"
[    22.082] (**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "system-keyboard"
[    22.082] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE  Keyboard'
[    22.082] (**) USB OPTICAL MOUSE  Keyboard: always reports core events
[    22.082] (**) Option "Device" "/dev/input/event3"
[    22.085] (II) event3  - USB OPTICAL MOUSE  Keyboard: is tagged by udev as: Keyboard
[    22.085] (II) event3  - USB OPTICAL MOUSE  Keyboard: device is a keyboard
[    22.086] (II) event3  - USB OPTICAL MOUSE  Keyboard: device removed
[    22.104] (II) libinput: USB OPTICAL MOUSE  Keyboard: needs a virtual subdevice
[    22.104] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-1/9-1:1.1/0003:18F8:0F99.0002/input/input3/event3"
[    22.104] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE  Keyboard" (type: MOUSE, id 9)
[    22.105] (**) Option "AccelerationScheme" "none"
[    22.105] (**) USB OPTICAL MOUSE  Keyboard: (accel) selected scheme none/0
[    22.105] (**) USB OPTICAL MOUSE  Keyboard: (accel) acceleration factor: 2.000
[    22.105] (**) USB OPTICAL MOUSE  Keyboard: (accel) acceleration threshold: 4
[    22.108] (II) event3  - USB OPTICAL MOUSE  Keyboard: is tagged by udev as: Keyboard
[    22.108] (II) event3  - USB OPTICAL MOUSE  Keyboard: device is a keyboard
[    22.111] (II) config/udev: Adding input device SEM USB Keyboard (/dev/input/event4)
[    22.111] (**) SEM USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    22.111] (**) SEM USB Keyboard: Applying InputClass "system-keyboard"
[    22.111] (II) Using input driver 'libinput' for 'SEM USB Keyboard'
[    22.111] (**) SEM USB Keyboard: always reports core events
[    22.111] (**) Option "Device" "/dev/input/event4"
[    22.114] (II) event4  - SEM USB Keyboard: is tagged by udev as: Keyboard
[    22.115] (II) event4  - SEM USB Keyboard: device is a keyboard
[    22.115] (II) event4  - SEM USB Keyboard: device removed
[    22.144] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-2/9-2:1.0/0003:1A2C:2124.0003/input/input5/event4"
[    22.144] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: KEYBOARD, id 10)
[    22.144] (**) Option "xkb_layout" "us,gr"
[    22.144] (**) Option "xkb_variant" "qwerty"
[    22.144] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    22.148] (II) event4  - SEM USB Keyboard: is tagged by udev as: Keyboard
[    22.148] (II) event4  - SEM USB Keyboard: device is a keyboard
[    22.151] (II) config/udev: Adding input device SEM USB Keyboard Consumer Control (/dev/input/event5)
[    22.151] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    22.151] (**) SEM USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[    22.151] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[    22.151] (**) SEM USB Keyboard Consumer Control: always reports core events
[    22.151] (**) Option "Device" "/dev/input/event5"
[    22.154] (II) event5  - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    22.155] (II) event5  - SEM USB Keyboard Consumer Control: device is a keyboard
[    22.155] (II) event5  - SEM USB Keyboard Consumer Control: device removed
[    22.184] (II) libinput: SEM USB Keyboard Consumer Control: needs a virtual subdevice
[    22.184] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-2/9-2:1.1/0003:1A2C:2124.0004/input/input6/event5"
[    22.184] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: MOUSE, id 11)
[    22.184] (**) Option "AccelerationScheme" "none"
[    22.184] (**) SEM USB Keyboard Consumer Control: (accel) selected scheme none/0
[    22.184] (**) SEM USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[    22.184] (**) SEM USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[    22.188] (II) event5  - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    22.188] (II) event5  - SEM USB Keyboard Consumer Control: device is a keyboard
[    22.190] (II) config/udev: Adding input device SEM USB Keyboard System Control (/dev/input/event6)
[    22.190] (**) SEM USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    22.190] (**) SEM USB Keyboard System Control: Applying InputClass "system-keyboard"
[    22.191] (II) Using input driver 'libinput' for 'SEM USB Keyboard System Control'
[    22.191] (**) SEM USB Keyboard System Control: always reports core events
[    22.191] (**) Option "Device" "/dev/input/event6"
[    22.194] (II) event6  - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[    22.194] (II) event6  - SEM USB Keyboard System Control: device is a keyboard
[    22.195] (II) event6  - SEM USB Keyboard System Control: device removed
[    22.224] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-2/9-2:1.1/0003:1A2C:2124.0004/input/input7/event6"
[    22.224] (II) XINPUT: Adding extended input device "SEM USB Keyboard System Control" (type: KEYBOARD, id 12)
[    22.224] (**) Option "xkb_layout" "us,gr"
[    22.224] (**) Option "xkb_variant" "qwerty"
[    22.224] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    22.228] (II) event6  - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[    22.228] (II) event6  - SEM USB Keyboard System Control: device is a keyboard
[    22.230] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    22.230] (II) No input driver specified, ignoring this device.
[    22.230] (II) This device may have been added with another device file.
[    22.249] (**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "libinput keyboard catchall"
[    22.249] (**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "system-keyboard"
[    22.249] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE  Keyboard'
[    22.249] (**) USB OPTICAL MOUSE  Keyboard: always reports core events
[    22.249] (**) Option "Device" "/dev/input/event3"
[    22.249] (II) libinput: USB OPTICAL MOUSE  Keyboard: is a virtual subdevice
[    22.250] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-1/9-1:1.1/0003:18F8:0F99.0002/input/input3/event3"
[    22.250] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE  Keyboard" (type: KEYBOARD, id 13)
[    22.250] (**) Option "xkb_layout" "us,gr"
[    22.250] (**) Option "xkb_variant" "qwerty"
[    22.250] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    22.250] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    22.250] (**) SEM USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[    22.250] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[    22.250] (**) SEM USB Keyboard Consumer Control: always reports core events
[    22.250] (**) Option "Device" "/dev/input/event5"
[    22.250] (II) libinput: SEM USB Keyboard Consumer Control: is a virtual subdevice
[    22.250] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-2/9-2:1.1/0003:1A2C:2124.0004/input/input6/event5"
[    22.250] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: KEYBOARD, id 14)
[    22.250] (**) Option "xkb_layout" "us,gr"
[    22.250] (**) Option "xkb_variant" "qwerty"
[    22.250] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    75.472] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[   266.224] resize called 2389 1024

and the previous log

[    23.547] 
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[    23.547] Current Operating System: Linux arch-wn 5.19.13-arch1-1 #1 SMP PREEMPT_DYNAMIC Tue, 04 Oct 2022 14:36:58 +0000 x86_64
[    23.547] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5f9eabd0-6ba0-41f5-9740-dd09c1ead06d rw loglevel=3 quiet
[    23.547]  
[    23.547] Current version of pixman: 0.40.0
[    23.547]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    23.547] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.547] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct  6 17:08:04 2022
[    23.551] (==) Using config file: "/etc/X11/xorg.conf"
[    23.551] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    23.551] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.553] (==) ServerLayout "X.org Configured"
[    23.553] (**) |-->Screen "Screen0" (0)
[    23.553] (**) |   |-->Monitor "Monitor0"
[    23.554] (**) |   |-->Device "Card0"
[    23.554] (**) |-->Input Device "Mouse0"
[    23.554] (**) |-->Input Device "Keyboard0"
[    23.554] (==) Automatically adding devices
[    23.554] (==) Automatically enabling devices
[    23.554] (==) Automatically adding GPU devices
[    23.554] (==) Automatically binding GPU devices
[    23.554] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    23.557] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    23.557]    Entry deleted from font path.
[    23.557] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    23.557]    Entry deleted from font path.
[    23.560] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    23.560]    Entry deleted from font path.
[    23.560] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    23.560]    Entry deleted from font path.
[    23.560] (**) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/TTF,
        /usr/share/fonts/100dpi,
        /usr/share/fonts/75dpi,
        /usr/share/fonts/misc,
        /usr/share/fonts/TTF,
        /usr/share/fonts/100dpi,
        /usr/share/fonts/75dpi
[    23.560] (**) ModulePath set to "/usr/lib/xorg/modules"
[    23.560] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    23.560] (WW) Disabling Mouse0
[    23.560] (WW) Disabling Keyboard0
[    23.560] (II) Module ABI versions:
[    23.560]    X.Org ANSI C Emulation: 0.4
[    23.560]    X.Org Video Driver: 25.2
[    23.560]    X.Org XInput driver : 24.4
[    23.560]    X.Org Server Extension : 10.0
[    23.561] (++) using VT number 1

[    23.561] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    23.562] (II) xfree86: Adding drm device (/dev/dri/card0)
[    23.562] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0/drm/card0
[    23.569] (--) PCI:*(1@0:0:0) 10de:0a20:0000:0000 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/131072
[    23.569] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    23.569] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    23.569] (II) LoadModule: "glx"
[    23.572] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.589] (II) Module glx: vendor="X.Org Foundation"
[    23.589]    compiled for 1.21.1.4, module version = 1.0.0
[    23.589]    ABI class: X.Org Server Extension, version 10.0
[    23.589] (II) LoadModule: "nouveau"
[    23.589] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    23.592] (II) Module nouveau: vendor="X.Org Foundation"
[    23.592]    compiled for 1.21.1.1, module version = 1.0.17
[    23.592]    Module class: X.Org Video Driver
[    23.592]    ABI class: X.Org Video Driver, version 25.2
[    23.592] (II) NOUVEAU driver 
[    23.592] (II) NOUVEAU driver for NVIDIA chipset families :
[    23.592]    RIVA TNT            (NV04)
[    23.593]    RIVA TNT2           (NV05)
[    23.593]    GeForce 256         (NV10)
[    23.593]    GeForce 2           (NV11, NV15)
[    23.593]    GeForce 4MX         (NV17, NV18)
[    23.593]    GeForce 3           (NV20)
[    23.593]    GeForce 4Ti         (NV25, NV28)
[    23.593]    GeForce FX          (NV3x)
[    23.593]    GeForce 6           (NV4x)
[    23.593]    GeForce 7           (G7x)
[    23.593]    GeForce 8           (G8x)
[    23.593]    GeForce 9           (G9x)
[    23.593]    GeForce GTX 2xx/3xx (GT2xx)
[    23.593]    GeForce GTX 4xx/5xx (GFxxx)
[    23.593]    GeForce GTX 6xx/7xx (GKxxx)
[    23.593]    GeForce GTX 9xx     (GMxxx)
[    23.593]    GeForce GTX 10xx    (GPxxx)
[    23.594] (II) [drm] nouveau interface version: 1.3.1
[    23.594] (II) Loading sub module "dri2"
[    23.594] (II) LoadModule: "dri2"
[    23.594] (II) Module "dri2" already built-in
[    23.594] (--) NOUVEAU(0): Chipset: "NVIDIA NVA5"
[    23.594] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    23.594] (==) NOUVEAU(0): RGB weight 888
[    23.594] (==) NOUVEAU(0): Default visual is TrueColor
[    23.594] (==) NOUVEAU(0): Using HW cursor
[    23.594] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[    23.594] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    23.594] (==) NOUVEAU(0): Page flipping enabled
[    23.594] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[    23.594] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[    23.594] (II) NOUVEAU(0): Initializing outputs ...
[    23.624] (II) NOUVEAU(0): Output DVI-I-1 using monitor section DVI-I-1
[    23.624] (**) NOUVEAU(0): Option "LeftOf" "VGA-1"
[    23.653] (II) NOUVEAU(0): Output VGA-1 using monitor section VGA-1
[    23.653] (**) NOUVEAU(0): Option "RightOf" "DVI-I-1"
[    23.653] (**) NOUVEAU(0): Option "Primary" "true"
[    23.654] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    23.654] (II) NOUVEAU(0): 3 crtcs needed for screen.
[    23.655] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    23.655] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    23.684] (II) NOUVEAU(0): EDID for output VGA-1
[    23.684] (II) NOUVEAU(0): Manufacturer: GSM  Model: 56fe  Serial#: 114428
[    23.684] (II) NOUVEAU(0): Year: 2009  Week: 7
[    23.684] (II) NOUVEAU(0): EDID Version: 1.3
[    23.684] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    23.684] (II) NOUVEAU(0): Sync:  Separate  SyncOnGreen
[    23.684] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[    23.684] (II) NOUVEAU(0): Gamma: 2.20
[    23.684] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    23.684] (II) NOUVEAU(0): First detailed timing is preferred mode
[    23.684] (II) NOUVEAU(0): redX: 0.635 redY: 0.342   greenX: 0.292 greenY: 0.611
[    23.684] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    23.685] (II) NOUVEAU(0): Supported established timings:
[    23.685] (II) NOUVEAU(0): 720x400@70Hz
[    23.685] (II) NOUVEAU(0): 640x480@60Hz
[    23.685] (II) NOUVEAU(0): 640x480@75Hz
[    23.685] (II) NOUVEAU(0): 800x600@60Hz
[    23.685] (II) NOUVEAU(0): 800x600@75Hz
[    23.685] (II) NOUVEAU(0): 1024x768@60Hz
[    23.685] (II) NOUVEAU(0): 1024x768@75Hz
[    23.685] (II) NOUVEAU(0): 1280x1024@75Hz
[    23.685] (II) NOUVEAU(0): Manufacturer's mask: 0
[    23.685] (II) NOUVEAU(0): Supported standard timings:
[    23.685] (II) NOUVEAU(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    23.685] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    23.685] (II) NOUVEAU(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    23.685] (II) NOUVEAU(0): #3: hsize: 1280  vsize 720  refresh: 75  vid: 53121
[    23.685] (II) NOUVEAU(0): #4: hsize: 1280  vsize 960  refresh: 75  vid: 20353
[    23.685] (II) NOUVEAU(0): Supported detailed timing:
[    23.685] (II) NOUVEAU(0): clock: 138.5 MHz   Image Size:  477 x 269 mm
[    23.685] (II) NOUVEAU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    23.685] (II) NOUVEAU(0): v_active: 1080  v_sync: 1082  v_sync_end 1087 v_blanking: 1111 v_border: 0
[    23.685] (II) NOUVEAU(0): Supported detailed timing:
[    23.685] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  477 x 269 mm
[    23.685] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    23.685] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    23.685] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[    23.685] (II) NOUVEAU(0): Monitor name: W2243
[    23.685] (II) NOUVEAU(0): EDID (in hex):
[    23.685] (II) NOUVEAU(0):   00ffffffffffff001e6dfe56fcbe0100
[    23.685] (II) NOUVEAU(0):   071301036a301b78eaaec5a2574a9c25
[    23.685] (II) NOUVEAU(0):   125054a54b00b3008180714f81cf814f
[    23.685] (II) NOUVEAU(0):   0101010101011a3680a070381f403020
[    23.685] (II) NOUVEAU(0):   2500dd0d1100001a023a801871382d40
[    23.685] (II) NOUVEAU(0):   582c4500dd0d1100001e000000fd0038
[    23.685] (II) NOUVEAU(0):   4b1e530f000a202020202020000000fc
[    23.685] (II) NOUVEAU(0):   0057323234330a2020202020202000e1
[    23.685] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    23.685] (II) NOUVEAU(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1082 1087 1111 +hsync -vsync (66.6 kHz eP)
[    23.685] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    23.714] (II) NOUVEAU(0): EDID for output DVI-I-1
[    23.714] (II) NOUVEAU(0): Manufacturer: LEN  Model: 4bd9  Serial#: 16843009
[    23.714] (II) NOUVEAU(0): Year: 2008  Week: 2
[    23.714] (II) NOUVEAU(0): EDID Version: 1.3
[    23.714] (II) NOUVEAU(0): Digital Display Input
[    23.714] (II) NOUVEAU(0): DFP 1.x compatible TMDS
[    23.714] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 36  vert.: 30
[    23.714] (II) NOUVEAU(0): Gamma: 2.20
[    23.714] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[    23.714] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    23.714] (II) NOUVEAU(0): Default color space is primary color space
[    23.714] (II) NOUVEAU(0): First detailed timing is preferred mode
[    23.714] (II) NOUVEAU(0): redX: 0.650 redY: 0.330   greenX: 0.300 greenY: 0.600
[    23.714] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    23.714] (II) NOUVEAU(0): Supported established timings:
[    23.714] (II) NOUVEAU(0): 720x400@70Hz
[    23.714] (II) NOUVEAU(0): 640x480@60Hz
[    23.714] (II) NOUVEAU(0): 640x480@67Hz
[    23.714] (II) NOUVEAU(0): 640x480@72Hz
[    23.714] (II) NOUVEAU(0): 640x480@75Hz
[    23.714] (II) NOUVEAU(0): 800x600@60Hz
[    23.714] (II) NOUVEAU(0): 800x600@72Hz
[    23.714] (II) NOUVEAU(0): 800x600@75Hz
[    23.714] (II) NOUVEAU(0): 1024x768@60Hz
[    23.714] (II) NOUVEAU(0): 1024x768@70Hz
[    23.714] (II) NOUVEAU(0): 1024x768@75Hz
[    23.714] (II) NOUVEAU(0): 1280x1024@75Hz
[    23.714] (II) NOUVEAU(0): Manufacturer's mask: 0
[    23.714] (II) NOUVEAU(0): Supported standard timings:
[    23.714] (II) NOUVEAU(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    23.714] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 70  vid: 35457
[    23.714] (II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
[    23.714] (II) NOUVEAU(0): #3: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
[    23.714] (II) NOUVEAU(0): Supported detailed timing:
[    23.714] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[    23.714] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    23.714] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    23.714] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[    23.714] (II) NOUVEAU(0): Monitor name: LEN L171p
[    23.714] (II) NOUVEAU(0): Serial No: VL-NMG56
[    23.714] (II) NOUVEAU(0): EDID (in hex):
[    23.714] (II) NOUVEAU(0):   00ffffffffffff0030aed94b01010101
[    23.714] (II) NOUVEAU(0):   0212010381241e78eeaea5a6544c9926
[    23.714] (II) NOUVEAU(0):   145054bdcf008180818a818c81900101
[    23.714] (II) NOUVEAU(0):   010101010101302a009851002a403070
[    23.714] (II) NOUVEAU(0):   1300520e1100001e000000fd00384c1e
[    23.714] (II) NOUVEAU(0):   510e000a202020202020000000fc004c
[    23.714] (II) NOUVEAU(0):   454e204c313731700a202020000000ff
[    23.714] (II) NOUVEAU(0):   00564c2d4e4d4735360a2020202000db
[    23.715] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    23.715] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    23.715] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    23.715] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    23.715] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    23.715] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    23.715] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    23.715] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    23.715] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    23.715] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    23.715] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    23.715] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    23.715] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    23.715] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    23.716] (II) NOUVEAU(0): EDID for output HDMI-1
[    23.716] (II) NOUVEAU(0): Output VGA-1 connected
[    23.716] (II) NOUVEAU(0): Output DVI-I-1 connected
[    23.716] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    23.716] (II) NOUVEAU(0): Using user preference for initial modes
[    23.716] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080 +0+0
[    23.716] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1280x1024 +0+0
[    23.716] (EE) NOUVEAU(0): Output position loop. Moving VGA-1 to 0,0
[    23.716] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[    23.716] (II) NOUVEAU(0): Virtual size is 3200x1080 (pitch 0)
[    23.716] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    23.716] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    23.716] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    23.716] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    23.716] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[    23.716] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    23.716] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    23.716] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    23.716] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    23.716] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    23.716] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[    23.716] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    23.716] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    23.716] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    23.716] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    23.716] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    23.716] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    23.716] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    23.716] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[    23.716] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    23.716] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    23.716] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    23.716] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    23.716] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    23.716] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    23.716] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    23.716] (==) NOUVEAU(0): DPI set to (96, 96)
[    23.716] (II) Loading sub module "fb"
[    23.716] (II) LoadModule: "fb"
[    23.716] (II) Module "fb" already built-in
[    23.716] (II) Loading sub module "shadowfb"
[    23.716] (II) LoadModule: "shadowfb"
[    23.716] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    23.717] (II) Module shadowfb: vendor="X.Org Foundation"
[    23.717]    compiled for 1.21.1.4, module version = 1.0.0
[    23.717]    ABI class: X.Org ANSI C Emulation, version 0.4
[    23.718] (II) NOUVEAU(0): Channel setup complete.
[    23.719] (II) NOUVEAU(0): [COPY] async initialised.
[    23.721] (II) NOUVEAU(0): Hardware support for Present enabled
[    23.722] (II) NOUVEAU(0): [DRI2] Setup complete
[    23.722] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    23.722] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    23.722] (II) Loading sub module "exa"
[    23.722] (II) LoadModule: "exa"
[    23.722] (II) Loading /usr/lib/xorg/modules/libexa.so
[    23.724] (II) Module exa: vendor="X.Org Foundation"
[    23.724]    compiled for 1.21.1.4, module version = 2.6.0
[    23.724]    ABI class: X.Org Video Driver, version 25.2
[    23.724] (II) EXA(0): Driver allocated offscreen pixmaps
[    23.724] (II) EXA(0): Driver registered support for the following operations:
[    23.724] (II)         Solid
[    23.724] (II)         Copy
[    23.724] (II)         Composite (RENDER acceleration)
[    23.724] (II)         UploadToScreen
[    23.724] (II)         DownloadFromScreen
[    23.724] (==) NOUVEAU(0): Backing store enabled
[    23.724] (==) NOUVEAU(0): Silken mouse enabled
[    23.724] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    23.724] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    23.724] (==) NOUVEAU(0): DPMS enabled
[    23.725] (II) Initializing extension Generic Event Extension
[    23.725] (II) Initializing extension SHAPE
[    23.725] (II) Initializing extension MIT-SHM
[    23.726] (II) Initializing extension XInputExtension
[    23.726] (II) Initializing extension XTEST
[    23.726] (II) Initializing extension BIG-REQUESTS
[    23.726] (II) Initializing extension SYNC
[    23.726] (II) Initializing extension XKEYBOARD
[    23.726] (II) Initializing extension XC-MISC
[    23.726] (II) Initializing extension SECURITY
[    23.727] (II) Initializing extension XFIXES
[    23.727] (II) Initializing extension RENDER
[    23.727] (II) Initializing extension RANDR
[    23.727] (II) Initializing extension COMPOSITE
[    23.727] (II) Initializing extension DAMAGE
[    23.727] (II) Initializing extension MIT-SCREEN-SAVER
[    23.727] (II) Initializing extension DOUBLE-BUFFER
[    23.728] (II) Initializing extension RECORD
[    23.728] (II) Initializing extension DPMS
[    23.728] (II) Initializing extension Present
[    23.728] (II) Initializing extension DRI3
[    23.728] (II) Initializing extension X-Resource
[    23.728] (II) Initializing extension XVideo
[    23.728] (II) Initializing extension XVideo-MotionCompensation
[    23.728] (II) Initializing extension GLX
[    24.113] (II) AIGLX: Loaded and initialized nouveau
[    24.113] (II) GLX: Initialized DRI2 GL provider for screen 0
[    24.113] (II) Initializing extension XFree86-VidModeExtension
[    24.113] (II) Initializing extension XFree86-DGA
[    24.113] (II) Initializing extension XFree86-DRI
[    24.113] (II) Initializing extension DRI2
[    24.115] (II) NOUVEAU(0): NVEnterVT is called.
[    24.217] (II) NOUVEAU(0): Setting screen physical size to 846 x 285
[    24.217] resize called 3200 1080
[    24.455] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    24.455] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    24.455] (**) Power Button: Applying InputClass "system-keyboard"
[    24.455] (II) LoadModule: "libinput"
[    24.455] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    24.462] (II) Module libinput: vendor="X.Org Foundation"
[    24.462]    compiled for 1.21.1.3, module version = 1.2.1
[    24.462]    Module class: X.Org XInput Driver
[    24.462]    ABI class: X.Org XInput driver, version 24.4
[    24.462] (II) Using input driver 'libinput' for 'Power Button'
[    24.462] (**) Power Button: always reports core events
[    24.462] (**) Option "Device" "/dev/input/event1"
[    24.482] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    24.482] (II) event1  - Power Button: device is a keyboard
[    24.482] (II) event1  - Power Button: device removed
[    24.527] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    24.527] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.527] (**) Option "xkb_layout" "us,gr"
[    24.527] (**) Option "xkb_variant" "qwerty"
[    24.527] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    24.558] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    24.558] (II) event1  - Power Button: device is a keyboard
[    24.558] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    24.558] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    24.558] (**) Power Button: Applying InputClass "system-keyboard"
[    24.558] (II) Using input driver 'libinput' for 'Power Button'
[    24.558] (**) Power Button: always reports core events
[    24.558] (**) Option "Device" "/dev/input/event0"
[    24.559] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    24.559] (II) event0  - Power Button: device is a keyboard
[    24.560] (II) event0  - Power Button: device removed
[    24.597] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    24.597] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    24.597] (**) Option "xkb_layout" "us,gr"
[    24.597] (**) Option "xkb_variant" "qwerty"
[    24.597] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    24.598] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    24.598] (II) event0  - Power Button: device is a keyboard
[    24.599] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[    24.599] (II) No input driver specified, ignoring this device.
[    24.600] (II) This device may have been added with another device file.
[    24.600] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[    24.600] (II) No input driver specified, ignoring this device.
[    24.600] (II) This device may have been added with another device file.
[    24.600] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[    24.601] (II) No input driver specified, ignoring this device.
[    24.601] (II) This device may have been added with another device file.
[    24.601] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[    24.601] (II) No input driver specified, ignoring this device.
[    24.601] (II) This device may have been added with another device file.
[    24.601] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event12)
[    24.601] (II) No input driver specified, ignoring this device.
[    24.602] (II) This device may have been added with another device file.
[    24.602] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event13)
[    24.602] (II) No input driver specified, ignoring this device.
[    24.602] (II) This device may have been added with another device file.
[    24.602] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event14)
[    24.602] (II) No input driver specified, ignoring this device.
[    24.602] (II) This device may have been added with another device file.
[    24.603] (II) config/udev: Adding input device HDA Intel MID Line Out (/dev/input/event15)
[    24.603] (II) No input driver specified, ignoring this device.
[    24.603] (II) This device may have been added with another device file.
[    24.604] (II) config/udev: Adding input device USB OPTICAL MOUSE  (/dev/input/event2)
[    24.604] (**) USB OPTICAL MOUSE : Applying InputClass "libinput pointer catchall"
[    24.604] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE '
[    24.604] (**) USB OPTICAL MOUSE : always reports core events
[    24.604] (**) Option "Device" "/dev/input/event2"
[    24.662] (II) event2  - USB OPTICAL MOUSE : is tagged by udev as: Mouse
[    24.662] (II) event2  - USB OPTICAL MOUSE : device is a pointer
[    24.662] (II) event2  - USB OPTICAL MOUSE : device removed
[    24.694] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-1/9-1:1.0/0003:18F8:0F99.0001/input/input2/event2"
[    24.694] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE " (type: MOUSE, id 8)
[    24.694] (**) Option "AccelerationScheme" "none"
[    24.694] (**) USB OPTICAL MOUSE : (accel) selected scheme none/0
[    24.694] (**) USB OPTICAL MOUSE : (accel) acceleration factor: 2.000
[    24.694] (**) USB OPTICAL MOUSE : (accel) acceleration threshold: 4
[    24.753] (II) event2  - USB OPTICAL MOUSE : is tagged by udev as: Mouse
[    24.754] (II) event2  - USB OPTICAL MOUSE : device is a pointer
[    24.756] (II) config/udev: Adding input device USB OPTICAL MOUSE  (/dev/input/mouse0)
[    24.756] (II) No input driver specified, ignoring this device.
[    24.756] (II) This device may have been added with another device file.
[    24.758] (II) config/udev: Adding input device USB OPTICAL MOUSE  Keyboard (/dev/input/event3)
[    24.758] (**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "libinput keyboard catchall"
[    24.758] (**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "system-keyboard"
[    24.758] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE  Keyboard'
[    24.758] (**) USB OPTICAL MOUSE  Keyboard: always reports core events
[    24.758] (**) Option "Device" "/dev/input/event3"
[    24.761] (II) event3  - USB OPTICAL MOUSE  Keyboard: is tagged by udev as: Keyboard
[    24.762] (II) event3  - USB OPTICAL MOUSE  Keyboard: device is a keyboard
[    24.762] (II) event3  - USB OPTICAL MOUSE  Keyboard: device removed
[    24.791] (II) libinput: USB OPTICAL MOUSE  Keyboard: needs a virtual subdevice
[    24.791] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-1/9-1:1.1/0003:18F8:0F99.0002/input/input3/event3"
[    24.791] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE  Keyboard" (type: MOUSE, id 9)
[    24.791] (**) Option "AccelerationScheme" "none"
[    24.791] (**) USB OPTICAL MOUSE  Keyboard: (accel) selected scheme none/0
[    24.791] (**) USB OPTICAL MOUSE  Keyboard: (accel) acceleration factor: 2.000
[    24.791] (**) USB OPTICAL MOUSE  Keyboard: (accel) acceleration threshold: 4
[    24.794] (II) event3  - USB OPTICAL MOUSE  Keyboard: is tagged by udev as: Keyboard
[    24.794] (II) event3  - USB OPTICAL MOUSE  Keyboard: device is a keyboard
[    24.797] (II) config/udev: Adding input device SEM USB Keyboard (/dev/input/event4)
[    24.797] (**) SEM USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    24.797] (**) SEM USB Keyboard: Applying InputClass "system-keyboard"
[    24.797] (II) Using input driver 'libinput' for 'SEM USB Keyboard'
[    24.797] (**) SEM USB Keyboard: always reports core events
[    24.797] (**) Option "Device" "/dev/input/event4"
[    24.800] (II) event4  - SEM USB Keyboard: is tagged by udev as: Keyboard
[    24.801] (II) event4  - SEM USB Keyboard: device is a keyboard
[    24.801] (II) event4  - SEM USB Keyboard: device removed
[    24.831] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-2/9-2:1.0/0003:1A2C:2124.0003/input/input5/event4"
[    24.831] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: KEYBOARD, id 10)
[    24.831] (**) Option "xkb_layout" "us,gr"
[    24.831] (**) Option "xkb_variant" "qwerty"
[    24.831] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    24.834] (II) event4  - SEM USB Keyboard: is tagged by udev as: Keyboard
[    24.835] (II) event4  - SEM USB Keyboard: device is a keyboard
[    24.837] (II) config/udev: Adding input device SEM USB Keyboard Consumer Control (/dev/input/event5)
[    24.837] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    24.837] (**) SEM USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[    24.837] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[    24.837] (**) SEM USB Keyboard Consumer Control: always reports core events
[    24.837] (**) Option "Device" "/dev/input/event5"
[    24.841] (II) event5  - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    24.841] (II) event5  - SEM USB Keyboard Consumer Control: device is a keyboard
[    24.841] (II) event5  - SEM USB Keyboard Consumer Control: device removed
[    24.871] (II) libinput: SEM USB Keyboard Consumer Control: needs a virtual subdevice
[    24.871] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-2/9-2:1.1/0003:1A2C:2124.0004/input/input6/event5"
[    24.871] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: MOUSE, id 11)
[    24.871] (**) Option "AccelerationScheme" "none"
[    24.871] (**) SEM USB Keyboard Consumer Control: (accel) selected scheme none/0
[    24.871] (**) SEM USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[    24.871] (**) SEM USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[    24.874] (II) event5  - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    24.875] (II) event5  - SEM USB Keyboard Consumer Control: device is a keyboard
[    24.877] (II) config/udev: Adding input device SEM USB Keyboard System Control (/dev/input/event6)
[    24.877] (**) SEM USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    24.877] (**) SEM USB Keyboard System Control: Applying InputClass "system-keyboard"
[    24.877] (II) Using input driver 'libinput' for 'SEM USB Keyboard System Control'
[    24.877] (**) SEM USB Keyboard System Control: always reports core events
[    24.877] (**) Option "Device" "/dev/input/event6"
[    24.880] (II) event6  - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[    24.881] (II) event6  - SEM USB Keyboard System Control: device is a keyboard
[    24.881] (II) event6  - SEM USB Keyboard System Control: device removed
[    24.911] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-2/9-2:1.1/0003:1A2C:2124.0004/input/input7/event6"
[    24.911] (II) XINPUT: Adding extended input device "SEM USB Keyboard System Control" (type: KEYBOARD, id 12)
[    24.911] (**) Option "xkb_layout" "us,gr"
[    24.911] (**) Option "xkb_variant" "qwerty"
[    24.911] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    24.914] (II) event6  - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[    24.915] (II) event6  - SEM USB Keyboard System Control: device is a keyboard
[    24.916] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    24.916] (II) No input driver specified, ignoring this device.
[    24.916] (II) This device may have been added with another device file.
[    24.935] (**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "libinput keyboard catchall"
[    24.935] (**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "system-keyboard"
[    24.935] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE  Keyboard'
[    24.935] (**) USB OPTICAL MOUSE  Keyboard: always reports core events
[    24.935] (**) Option "Device" "/dev/input/event3"
[    24.935] (II) libinput: USB OPTICAL MOUSE  Keyboard: is a virtual subdevice
[    24.935] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-1/9-1:1.1/0003:18F8:0F99.0002/input/input3/event3"
[    24.936] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE  Keyboard" (type: KEYBOARD, id 13)
[    24.936] (**) Option "xkb_layout" "us,gr"
[    24.936] (**) Option "xkb_variant" "qwerty"
[    24.936] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    24.936] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    24.936] (**) SEM USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[    24.936] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[    24.936] (**) SEM USB Keyboard Consumer Control: always reports core events
[    24.936] (**) Option "Device" "/dev/input/event5"
[    24.936] (II) libinput: SEM USB Keyboard Consumer Control: is a virtual subdevice
[    24.936] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb9/9-2/9-2:1.1/0003:1A2C:2124.0004/input/input6/event5"
[    24.936] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: KEYBOARD, id 14)
[    24.936] (**) Option "xkb_layout" "us,gr"
[    24.936] (**) Option "xkb_variant" "qwerty"
[    24.936] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    32.857] (II) NOUVEAU(0): EDID vendor "LEN", prod id 19417
[    32.857] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    32.857] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    32.857] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    32.857] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    32.857] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "1280x1024"x70.0  128.94  1280 1368 1504 1728  1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz e)
[    32.857] (II) NOUVEAU(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz e)
[    32.919] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[    33.729] (II) NOUVEAU(0): EDID vendor "LEN", prod id 19417
[    33.729] (II) NOUVEAU(0): Using hsync ranges from config file
[    33.729] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    33.729] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    33.729] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    33.729] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "1280x1024"x70.0  128.94  1280 1368 1504 1728  1024 1025 1028 1066 -hsync +vsync (74.6 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "1280x1024"x72.0  132.75  1280 1368 1504 1728  1024 1025 1028 1067 -hsync +vsync (76.8 kHz e)
[    33.729] (II) NOUVEAU(0): Modeline "1280x1024"x76.0  141.82  1280 1376 1512 1744  1024 1025 1028 1070 -hsync +vsync (81.3 kHz e)
[   175.947] (EE) event4  - SEM USB Keyboard: client bug: event processing lagging behind by 36ms, your system is too slow
[   281.548] (EE) event4  - SEM USB Keyboard: client bug: event processing lagging behind by 33ms, your system is too slow
[  1115.038] resize called 1920 1080
[  1131.389] resize called 3200 1080
[  1194.839] resize called 1920 1080
[  1373.393] resize called 2395 1170
[  1426.616] resize called 3361 1170
[  1426.717] resize called 3361 1080
[  1439.331] resize called 1920 1080
[  2259.632] (EE) event2  - USB OPTICAL MOUSE : client bug: event processing lagging behind by 37ms, your system is too slow
[  3020.993] resize called 3361 1080
[  3040.998] resize called 3369 1080
[  3065.454] (EE) event2  - USB OPTICAL MOUSE : client bug: event processing lagging behind by 21ms, your system is too slow
[  3067.206] (EE) event2  - USB OPTICAL MOUSE : client bug: event processing lagging behind by 21ms, your system is too slow
[  3068.424] (EE) event2  - USB OPTICAL MOUSE : client bug: event processing lagging behind by 23ms, your system is too slow
[  4655.436] (II) event1  - Power Button: device removed
[  4655.444] (II) event0  - Power Button: device removed
[  4655.470] (II) event2  - USB OPTICAL MOUSE : device removed
[  4655.507] (II) event4  - SEM USB Keyboard: device removed
[  4655.543] (II) event6  - SEM USB Keyboard System Control: device removed
[  4655.570] (II) event3  - USB OPTICAL MOUSE  Keyboard: device removed
[  4655.607] (II) event5  - SEM USB Keyboard Consumer Control: device removed
[  4655.651] (II) UnloadModule: "libinput"
[  4655.651] (II) UnloadModule: "libinput"
[  4655.651] (II) UnloadModule: "libinput"
[  4655.651] (II) UnloadModule: "libinput"
[  4655.651] (II) UnloadModule: "libinput"
[  4655.651] (II) UnloadModule: "libinput"
[  4655.651] (II) UnloadModule: "libinput"
[  4655.651] (II) UnloadModule: "libinput"
[  4655.652] (II) UnloadModule: "libinput"
[  4655.704] (II) NOUVEAU(0): NVLeaveVT is called.
[  4655.794] (II) Server terminated successfully (0). Closing log file.

Last edited by a1n_s0ph (2022-10-06 16:06:25)

Offline

#4 2022-10-06 16:19:18

seth
Member
Registered: 2012-09-03
Posts: 49,951

Re: Can't get 1920x1080 screen resolution on primary monitor after pluggin

[    20.948] (II) NOUVEAU(0): EDID for output VGA-1
[    20.948] (II) NOUVEAU(0): Printing probed modes for output VGA-1

./.

[    23.684] (II) NOUVEAU(0): EDID for output VGA-1
[    23.684] (II) NOUVEAU(0): Manufacturer: GSM  Model: 56fe  Serial#: 114428
[    23.684] (II) NOUVEAU(0): Year: 2009  Week: 7
[    23.684] (II) NOUVEAU(0): EDID Version: 1.3
[    23.684] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    23.684] (II) NOUVEAU(0): Sync:  Separate  SyncOnGreen
[    23.684] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[    23.684] (II) NOUVEAU(0): Gamma: 2.20
[    23.684] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    23.684] (II) NOUVEAU(0): First detailed timing is preferred mode
[    23.684] (II) NOUVEAU(0): redX: 0.635 redY: 0.342   greenX: 0.292 greenY: 0.611
[    23.684] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    23.685] (II) NOUVEAU(0): Supported established timings:
[    23.685] (II) NOUVEAU(0): 720x400@70Hz
[    23.685] (II) NOUVEAU(0): 640x480@60Hz
[    23.685] (II) NOUVEAU(0): 640x480@75Hz
[    23.685] (II) NOUVEAU(0): 800x600@60Hz
[    23.685] (II) NOUVEAU(0): 800x600@75Hz
[    23.685] (II) NOUVEAU(0): 1024x768@60Hz
[    23.685] (II) NOUVEAU(0): 1024x768@75Hz
[    23.685] (II) NOUVEAU(0): 1280x1024@75Hz
[    23.685] (II) NOUVEAU(0): Manufacturer's mask: 0
[    23.685] (II) NOUVEAU(0): Supported standard timings:
[    23.685] (II) NOUVEAU(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    23.685] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    23.685] (II) NOUVEAU(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    23.685] (II) NOUVEAU(0): #3: hsize: 1280  vsize 720  refresh: 75  vid: 53121
[    23.685] (II) NOUVEAU(0): #4: hsize: 1280  vsize 960  refresh: 75  vid: 20353
[    23.685] (II) NOUVEAU(0): Supported detailed timing:
[    23.685] (II) NOUVEAU(0): clock: 138.5 MHz   Image Size:  477 x 269 mm
[    23.685] (II) NOUVEAU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    23.685] (II) NOUVEAU(0): v_active: 1080  v_sync: 1082  v_sync_end 1087 v_blanking: 1111 v_border: 0
[    23.685] (II) NOUVEAU(0): Supported detailed timing:
[    23.685] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  477 x 269 mm
[    23.685] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    23.685] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    23.685] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[    23.685] (II) NOUVEAU(0): Monitor name: W2243
[    23.685] (II) NOUVEAU(0): EDID (in hex):
[    23.685] (II) NOUVEAU(0):   00ffffffffffff001e6dfe56fcbe0100
[    23.685] (II) NOUVEAU(0):   071301036a301b78eaaec5a2574a9c25
[    23.685] (II) NOUVEAU(0):   125054a54b00b3008180714f81cf814f
[    23.685] (II) NOUVEAU(0):   0101010101011a3680a070381f403020
[    23.685] (II) NOUVEAU(0):   2500dd0d1100001a023a801871382d40
[    23.685] (II) NOUVEAU(0):   582c4500dd0d1100001e000000fd0038
[    23.685] (II) NOUVEAU(0):   4b1e530f000a202020202020000000fc
[    23.685] (II) NOUVEAU(0):   0057323234330a2020202020202000e1
[    23.685] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    23.685] (II) NOUVEAU(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1082 1087 1111 +hsync -vsync (66.6 kHz eP)
[    23.685] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    23.685] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
seth wrote:

Offline

Board footer

Powered by FluxBB