You are not logged in.

#1 2022-10-07 18:22:27

Sumerlands
Member
Registered: 2022-10-03
Posts: 4

When suspend exit, computer snow screen.

I use gnome-shell --wayland enter to desktop
Next step click gnome suspend
https://images2.imgbox.com/46/fc/aktIUjj9_o.png
But when suspend exit
The screen is static noise (or snow screen?)
https://images2.imgbox.com/55/26/LzA85tG2_o.jpg

$ lspci -k

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge (rev 02)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0)
	DeviceName:  Onboard IGD
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
	Kernel driver in use: pcieport
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 4393
	Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
	Kernel driver in use: ohci-pci
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
	Kernel driver in use: ehci-pci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
	Kernel driver in use: ohci-pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
	Kernel driver in use: ehci-pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
	Kernel driver in use: ohci-pci
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
	Kernel driver in use: pcieport
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
	Kernel driver in use: pcieport
00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
	Kernel driver in use: pcieport
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
	Kernel driver in use: ohci-pci
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
	Kernel driver in use: ehci-pci
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
	Kernel driver in use: k10temp
	Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
	Kernel driver in use: fam15h_power
	Kernel modules: fam15h_power
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper PRO [Radeon HD 6750]
	Subsystem: Hightech Information System Ltd. Device 2313
	Kernel driver in use: radeon
	Kernel modules: radeon, amdgpu
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]
	Subsystem: Hightech Information System Ltd. Device aa58
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)
	Subsystem: Realtek Semiconductor Co., Ltd. Device 0123
	Kernel driver in use: r8169
	Kernel modules: r8169
04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
	Subsystem: Device 174c:2104
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
	Subsystem: Device 174c:2104
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

$ glxinfo -B

name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: X.Org (0x1002)
    Device: AMD JUNIPER (DRM 2.50.0 / 5.19.13-arch1-1, LLVM 14.0.6) (0x68bf)
    Version: 22.1.7
    Accelerated: yes
    Video memory: 1024MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 3.3
    Max compat profile version: 3.1
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.1
Memory info (GL_ATI_meminfo):
    VBO free memory - total: 1023 MB, largest block: 1023 MB
    VBO free aux. memory - total: 1021 MB, largest block: 1021 MB
    Texture free memory - total: 1023 MB, largest block: 1023 MB
    Texture free aux. memory - total: 1021 MB, largest block: 1021 MB
    Renderbuffer free memory - total: 1023 MB, largest block: 1023 MB
    Renderbuffer free aux. memory - total: 1021 MB, largest block: 1021 MB
Memory info (GL_NVX_gpu_memory_info):
    Dedicated video memory: 1024 MB
    Total available memory: 2045 MB
    Currently available dedicated video memory: 1023 MB
OpenGL vendor string: X.Org
OpenGL renderer string: AMD JUNIPER (DRM 2.50.0 / 5.19.13-arch1-1, LLVM 14.0.6)
OpenGL core profile version string: 3.3 (Core Profile) Mesa 22.1.7
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.1 Mesa 22.1.7
OpenGL shading language version string: 1.40
OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.1 Mesa 22.1.7
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10

$ journalctl

Oct 08 01:31:20 Sumerlands kernel: PM: suspend exit
Oct 08 01:31:20 Sumerlands kernel: random: crng reseeded on system resumption
Oct 08 01:31:20 Sumerlands kernel: Restarting tasks ... done.
Oct 08 01:31:20 Sumerlands kernel: OOM killer enabled.
Oct 08 01:31:20 Sumerlands kernel: ata1.00: configured for UDMA/133
Oct 08 01:31:20 Sumerlands kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 08 01:31:20 Sumerlands kernel: ata2.00: configured for UDMA/133
Oct 08 01:31:20 Sumerlands kernel: ata2.00: supports DRM functions and may not be fully accessible
Oct 08 01:31:20 Sumerlands kernel: ata2.00: supports DRM functions and may not be fully accessible
Oct 08 01:31:20 Sumerlands kernel: ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 08 01:31:20 Sumerlands kernel: ata3: SATA link down (SStatus 0 SControl 300)
Oct 08 01:31:20 Sumerlands kernel: ata4: SATA link down (SStatus 0 SControl 300)
Oct 08 01:31:20 Sumerlands kernel: ata5: SATA link down (SStatus 0 SControl 300)
Oct 08 01:31:20 Sumerlands kernel: ata6: SATA link down (SStatus 0 SControl 300)
Oct 08 01:31:20 Sumerlands kernel: r8169 0000:03:00.0 enp3s0: Link is Down
Oct 08 01:31:20 Sumerlands kernel: [drm:evergreen_resume [radeon]] *ERROR* evergreen startup failed on resume
Oct 08 01:31:20 Sumerlands kernel: [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x8504)=0xCAFEDEAD)
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0xa596a50200 flags=0x0010]
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0xa596a50180 flags=0x0010]
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0xa596a50280 flags=0x0010]
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0xa596a50100 flags=0x0010]
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0xa596a50080 flags=0x0010]
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0xa596a501c0 flags=0x0010]
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0xa596a50040 flags=0x0010]
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c0400 flags=0x0020]
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0xa596a50000 flags=0x0010]
Oct 08 01:31:20 Sumerlands kernel: debugfs: File 'radeon_ring_dma1' in directory '0' already present!
Oct 08 01:31:20 Sumerlands kernel: debugfs: File 'radeon_ring_gfx' in directory '0' already present!
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c0800 flags=0x0020]
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
Oct 08 01:31:20 Sumerlands kernel: radeon 0000:01:00.0: WB enabled
Oct 08 01:31:20 Sumerlands kernel: [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
Oct 08 01:31:20 Sumerlands kernel: [drm] PCIE gen 2 link speeds already enabled
Oct 08 01:31:20 Sumerlands kernel: serial 00:02: activated
Oct 08 01:31:20 Sumerlands kernel: sd 1:0:0:0: [sdb] Starting disk
Oct 08 01:31:20 Sumerlands kernel: sd 0:0:0:0: [sda] Starting disk
Oct 08 01:31:20 Sumerlands kernel: usb usb11: root hub lost power or was reset
Oct 08 01:31:20 Sumerlands kernel: usb usb10: root hub lost power or was reset
Oct 08 01:31:20 Sumerlands kernel: xhci_hcd 0000:05:00.0: xHC error in resume, USBSTS 0x401, Reinit
Oct 08 01:31:20 Sumerlands kernel: usb usb9: root hub lost power or was reset
Oct 08 01:31:20 Sumerlands kernel: usb usb8: root hub lost power or was reset
Oct 08 01:31:20 Sumerlands kernel: xhci_hcd 0000:04:00.0: xHC error in resume, USBSTS 0x401, Reinit
Oct 08 01:31:20 Sumerlands kernel: sd 1:0:0:0: [sdb] Stopping disk
Oct 08 01:31:20 Sumerlands kernel: sd 0:0:0:0: [sda] Stopping disk
Oct 08 01:31:20 Sumerlands kernel: sd 1:0:0:0: [sdb] Synchronizing SCSI cache
Oct 08 01:31:20 Sumerlands kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 08 01:31:20 Sumerlands kernel: r8169 0000:03:00.0 enp3s0: Link is Down
Oct 08 01:31:20 Sumerlands kernel: serial 00:02: disabled
Oct 08 01:31:20 Sumerlands kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Oct 08 01:31:20 Sumerlands kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Oct 08 01:31:20 Sumerlands kernel: OOM killer disabled.
Oct 08 01:31:20 Sumerlands kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
Oct 08 01:29:06 Sumerlands kernel: Filesystems sync: 0.377 seconds
Oct 08 01:29:06 Sumerlands kernel: PM: suspend entry (s2idle)
Oct 08 01:29:06 Sumerlands systemd-sleep[647]: Entering sleep state 'suspend'...
Oct 08 01:29:06 Sumerlands systemd[1]: Starting System Suspend...

Last edited by Sumerlands (2022-10-07 18:32:55)

Offline

#2 2022-10-08 08:33:03

Sumerlands
Member
Registered: 2022-10-03
Posts: 4

Re: When suspend exit, computer snow screen.

Oct 08 14:17:20 Sumerlands kernel: PM: suspend exit
Oct 08 14:17:20 Sumerlands kernel: random: crng reseeded on system resumption
Oct 08 14:17:20 Sumerlands kernel: Restarting tasks ... done.
Oct 08 14:17:20 Sumerlands kernel: OOM killer enabled.
Oct 08 14:17:20 Sumerlands kernel: AMD-Vi: IOMMU event log overflow
Oct 08 14:17:20 Sumerlands kernel: AMD-Vi: IOMMU event log overflow
Oct 08 14:17:20 Sumerlands kernel: AMD-Vi: IOMMU event log overflow
Oct 08 14:17:20 Sumerlands kernel: AMD-Vi: IOMMU event log overflow
Oct 08 14:17:20 Sumerlands kernel: AMD-Vi: IOMMU event log overflow
Oct 08 14:17:20 Sumerlands kernel: AMD-Vi: IOMMU event log overflow
Oct 08 14:17:20 Sumerlands kernel: AMD-Vi: IOMMU event log overflow
Oct 08 14:17:20 Sumerlands kernel: AMD-Vi: IOMMU event log overflow
Oct 08 14:17:20 Sumerlands kernel: AMD-Vi: IOMMU event log overflow
Oct 08 14:17:20 Sumerlands kernel: AMD-Vi: IOMMU event log overflow
Oct 08 14:17:20 Sumerlands kernel: ata1.00: configured for UDMA/133
Oct 08 14:17:20 Sumerlands kernel: ata2.00: configured for UDMA/133
Oct 08 14:17:20 Sumerlands kernel: ata2.00: supports DRM functions and may not be fully accessible
Oct 08 14:17:20 Sumerlands kernel: ata2.00: supports DRM functions and may not be fully accessible
Oct 08 14:17:20 Sumerlands kernel: ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 08 14:17:20 Sumerlands kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 08 14:17:20 Sumerlands kernel: ata3: SATA link down (SStatus 0 SControl 300)
Oct 08 14:17:20 Sumerlands kernel: ata5: SATA link down (SStatus 0 SControl 300)
Oct 08 14:17:20 Sumerlands kernel: ata4: SATA link down (SStatus 0 SControl 300)
Oct 08 14:17:20 Sumerlands kernel: ata6: SATA link down (SStatus 0 SControl 300)
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c1080 flags=0x0020]
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c0800 flags=0x0020]
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c1070 flags=0x0020]
Oct 08 14:17:20 Sumerlands kernel: r8169 0000:03:00.0 enp3s0: Link is Down
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c0800 flags=0x0020]
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c1060 flags=0x0020]
Oct 08 14:17:20 Sumerlands kernel: [drm:evergreen_resume [radeon]] *ERROR* evergreen startup failed on resume
Oct 08 14:17:20 Sumerlands kernel: [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x8504)=0xCAFEDEAD)
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c0400 flags=0x0020]
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c0400 flags=0x0020]
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c0000 flags=0x0020]
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c0400 flags=0x0020]
Oct 08 14:17:20 Sumerlands kernel: debugfs: File 'radeon_ring_dma1' in directory '0' already present!
Oct 08 14:17:20 Sumerlands kernel: debugfs: File 'radeon_ring_gfx' in directory '0' already present!
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0x79995c0800 flags=0x0020]
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
Oct 08 14:17:20 Sumerlands kernel: radeon 0000:01:00.0: WB enabled
Oct 08 14:17:20 Sumerlands kernel: [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
Oct 08 14:17:20 Sumerlands kernel: [drm] PCIE gen 2 link speeds already enabled
Oct 08 14:17:20 Sumerlands kernel: serial 00:02: activated
Oct 08 14:17:20 Sumerlands kernel: sd 1:0:0:0: [sdb] Starting disk
Oct 08 14:17:20 Sumerlands kernel: sd 0:0:0:0: [sda] Starting disk
Oct 08 14:17:20 Sumerlands kernel: usb usb9: root hub lost power or was reset
Oct 08 14:17:20 Sumerlands kernel: usb usb8: root hub lost power or was reset
Oct 08 14:17:20 Sumerlands kernel: xhci_hcd 0000:04:00.0: xHC error in resume, USBSTS 0x401, Reinit
Oct 08 14:17:20 Sumerlands kernel: usb usb11: root hub lost power or was reset
Oct 08 14:17:20 Sumerlands kernel: usb usb10: root hub lost power or was reset
Oct 08 14:17:20 Sumerlands kernel: xhci_hcd 0000:05:00.0: xHC error in resume, USBSTS 0x401, Reinit
Oct 08 14:17:20 Sumerlands kernel: sd 1:0:0:0: [sdb] Stopping disk
Oct 08 14:17:20 Sumerlands kernel: sd 1:0:0:0: [sdb] Synchronizing SCSI cache
Oct 08 14:17:20 Sumerlands kernel: sd 0:0:0:0: [sda] Stopping disk
Oct 08 14:17:20 Sumerlands kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 08 14:17:20 Sumerlands kernel: r8169 0000:03:00.0 enp3s0: Link is Down
Oct 08 14:17:20 Sumerlands kernel: serial 00:02: disabled
Oct 08 14:17:20 Sumerlands kernel: printk: Suspending console(s) (use no_console_suspend to debug)
Oct 08 14:17:20 Sumerlands kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Oct 08 14:17:20 Sumerlands kernel: OOM killer disabled.
Oct 08 14:17:20 Sumerlands kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
Oct 08 14:17:07 Sumerlands kernel: Filesystems sync: 0.158 seconds
Oct 08 14:17:07 Sumerlands kernel: PM: suspend entry (s2idle)
Oct 08 14:17:07 Sumerlands systemd-sleep[798]: Entering sleep state 'suspend'...
Oct 08 14:17:07 Sumerlands systemd[1]: Starting System Suspend...

$ dmesg

[    0.000000] Linux version 5.19.13-arch1-1 (linux@archlinux) (gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0) #1 SMP PREEMPT_DYNAMIC Tue, 04 Oct 2022 14:36:58 +0000
[    0.000000] Command line: initrd=\initramfs-linux.img initrd=\amd-ucode.img root=UUID=58449621-a410-4a79-a620-72ab8886521e rw
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf91fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdf92000-0x00000000bdfc1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bdfc2000-0x00000000be3a0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be3a1000-0x00000000be8c1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000be8c2000-0x00000000bea04fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bea05000-0x00000000bea05fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bea06000-0x00000000bec0bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bec0c000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xaa670018-0xaa680057] usable ==> usable
[    0.000000] e820: update [mem 0xaa670018-0xaa680057] usable ==> usable
[    0.000000] e820: update [mem 0xaa662018-0xaa66f057] usable ==> usable
[    0.000000] e820: update [mem 0xaa662018-0xaa66f057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000aa662017] usable
[    0.000000] reserve setup_data: [mem 0x00000000aa662018-0x00000000aa66f057] usable
[    0.000000] reserve setup_data: [mem 0x00000000aa66f058-0x00000000aa670017] usable
[    0.000000] reserve setup_data: [mem 0x00000000aa670018-0x00000000aa680057] usable
[    0.000000] reserve setup_data: [mem 0x00000000aa680058-0x00000000bdf91fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bdf92000-0x00000000bdfc1fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bdfc2000-0x00000000be3a0fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000be3a1000-0x00000000be8c1fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000be8c2000-0x00000000bea04fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bea05000-0x00000000bea05fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bea06000-0x00000000bec0bfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000bec0c000-0x00000000bf7fffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100001000-0x000000023fffffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi: ESRT=0xbe9bbc18 ACPI=0xbe4b1000 ACPI 2.0=0xbe4b1000 SMBIOS=0xf04c0 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./PURE PLATINUM 970A-MA, BIOS 4.6.5 07/24/2014
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3300.312 MHz processor
[    0.001249] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001252] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001260] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.002840] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003017] total RAM covered: 3064M
[    0.003322] Found optimal setting for mtrr clean up
[    0.003323]  gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
[    0.003956] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[    0.003965] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.008541] found SMP MP-table at [mem 0x000fd870-0x000fd87f]
[    0.008561] esrt: Reserving ESRT space from 0x00000000be9bbc18 to 0x00000000be9bbc50.
[    0.008578] Using GB pages for direct mapping
[    0.009894] Secure boot disabled
[    0.009895] RAMDISK: [mem 0x7e940000-0x7f4a5fff]
[    0.009899] ACPI: Early table checksum verification disabled
[    0.009903] ACPI: RSDP 0x00000000BE4B1000 000024 (v02 ALASKA)
[    0.009908] ACPI: XSDT 0x00000000BE4B1070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009914] ACPI: FACP 0x00000000BE4B5CE8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.009919] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20220331/tbfadt-615)
[    0.009924] ACPI: DSDT 0x00000000BE4B1160 004B83 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.009929] ACPI: FACS 0x00000000BE8BB080 000040
[    0.009932] ACPI: APIC 0x00000000BE4B5DF8 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.009936] ACPI: FPDT 0x00000000BE4B5E98 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009940] ACPI: MCFG 0x00000000BE4B5EE0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.009944] ACPI: HPET 0x00000000BE4B5F20 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.009948] ACPI: SSDT 0x00000000BE4B5F58 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.009952] ACPI: IVRS 0x00000000BE4B7670 0000C8 (v01 AMD    RD890S   00202031 AMD  00000000)
[    0.009955] ACPI: Reserving FACP table memory at [mem 0xbe4b5ce8-0xbe4b5df3]
[    0.009957] ACPI: Reserving DSDT table memory at [mem 0xbe4b1160-0xbe4b5ce2]
[    0.009958] ACPI: Reserving FACS table memory at [mem 0xbe8bb080-0xbe8bb0bf]
[    0.009959] ACPI: Reserving APIC table memory at [mem 0xbe4b5df8-0xbe4b5e95]
[    0.009960] ACPI: Reserving FPDT table memory at [mem 0xbe4b5e98-0xbe4b5edb]
[    0.009962] ACPI: Reserving MCFG table memory at [mem 0xbe4b5ee0-0xbe4b5f1b]
[    0.009963] ACPI: Reserving HPET table memory at [mem 0xbe4b5f20-0xbe4b5f57]
[    0.009964] ACPI: Reserving SSDT table memory at [mem 0xbe4b5f58-0xbe4b766b]
[    0.009965] ACPI: Reserving IVRS table memory at [mem 0xbe4b7670-0xbe4b7737]
[    0.010053] No NUMA configuration found
[    0.010054] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[    0.010058] NODE_DATA(0) allocated [mem 0x23fffa000-0x23fffdfff]
[    0.010090] Zone ranges:
[    0.010091]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010093]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.010094]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    0.010096]   Device   empty
[    0.010097] Movable zone start for each node
[    0.010098] Early memory node ranges
[    0.010098]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.010100]   node   0: [mem 0x0000000000100000-0x00000000bdf91fff]
[    0.010101]   node   0: [mem 0x00000000bdfc2000-0x00000000be3a0fff]
[    0.010102]   node   0: [mem 0x00000000bea05000-0x00000000bea05fff]
[    0.010103]   node   0: [mem 0x00000000bec0c000-0x00000000bf7fffff]
[    0.010104]   node   0: [mem 0x0000000100001000-0x000000023fffffff]
[    0.010106] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[    0.010112] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010151] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.022393] On node 0, zone DMA32: 48 pages in unavailable ranges
[    0.022429] On node 0, zone DMA32: 1636 pages in unavailable ranges
[    0.022495] On node 0, zone DMA32: 518 pages in unavailable ranges
[    0.045038] On node 0, zone Normal: 2049 pages in unavailable ranges
[    0.045212] ACPI: PM-Timer IO Port: 0x808
[    0.045221] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.045231] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.045235] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[    0.045237] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.045240] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.045244] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.045245] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.045252] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.045273] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.045276] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.045278] PM: hibernation: Registered nosave memory: [mem 0xaa662000-0xaa662fff]
[    0.045280] PM: hibernation: Registered nosave memory: [mem 0xaa66f000-0xaa66ffff]
[    0.045281] PM: hibernation: Registered nosave memory: [mem 0xaa670000-0xaa670fff]
[    0.045283] PM: hibernation: Registered nosave memory: [mem 0xaa680000-0xaa680fff]
[    0.045285] PM: hibernation: Registered nosave memory: [mem 0xbdf92000-0xbdfc1fff]
[    0.045287] PM: hibernation: Registered nosave memory: [mem 0xbe3a1000-0xbe8c1fff]
[    0.045288] PM: hibernation: Registered nosave memory: [mem 0xbe8c2000-0xbea04fff]
[    0.045290] PM: hibernation: Registered nosave memory: [mem 0xbea06000-0xbec0bfff]
[    0.045292] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff]
[    0.045293] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[    0.045294] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.045294] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.045295] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.045296] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.045297] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[    0.045298] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[    0.045298] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[    0.045299] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.045300] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[    0.045301] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[    0.045301] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.045303] [mem 0xbf800000-0xfebfffff] available for PCI devices
[    0.045305] Booting paravirtualized kernel on bare hardware
[    0.045308] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.050093] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.050886] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[    0.050895] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[    0.050898] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.050928] Fallback order for Node 0: 0 
[    0.050932] Built 1 zonelists, mobility grouping on.  Total pages: 2059943
[    0.050933] Policy zone: Normal
[    0.050934] Kernel command line: initrd=\initramfs-linux.img initrd=\amd-ucode.img root=UUID=58449621-a410-4a79-a620-72ab8886521e rw
[    0.053187] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.054347] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.054961] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.121099] Memory: 7890116K/8371216K available (14343K kernel code, 2072K rwdata, 11176K rodata, 2116K init, 3584K bss, 480840K reserved, 0K cma-reserved)
[    0.121476] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.121498] ftrace: allocating 45426 entries in 178 pages
[    0.131784] ftrace: allocated 178 pages with 4 groups
[    0.131908] Dynamic Preempt: full
[    0.131964] rcu: Preemptible hierarchical RCU implementation.
[    0.131965] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.131966] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.131967] 	Trampoline variant of Tasks RCU enabled.
[    0.131968] 	Rude variant of Tasks RCU enabled.
[    0.131969] 	Tracing variant of Tasks RCU enabled.
[    0.131969] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.131970] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.137056] NR_IRQS: 20736, nr_irqs: 1032, preallocated irqs: 16
[    0.137236] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.137322] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.137364] Console: colour dummy device 80x25
[    0.137383] printk: console [tty0] enabled
[    0.137416] ACPI: Core revision 20220331
[    0.137521] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.137534] APIC: Switch to symmetric I/O mode setup
[    0.178402] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.194200] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f9273558e3, max_idle_ns: 440795314475 ns
[    0.194205] Calibrating delay loop (skipped), value calculated using timer frequency.. 6603.65 BogoMIPS (lpj=11001040)
[    0.194209] pid_max: default: 32768 minimum: 301
[    0.202217] LSM: Security Framework initializing
[    0.202224] landlock: Up and running.
[    0.202226] Yama: becoming mindful.
[    0.202240] LSM support for eBPF active
[    0.202306] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.202329] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.202661] LVT offset 1 assigned for vector 0xf9
[    0.202666] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.202668] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.202672] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.202675] Spectre V2 : Mitigation: Retpolines
[    0.202675] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.202676] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.202677] RETBleed: Mitigation: untrained return thunk
[    0.202678] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.212526] Freeing SMP alternatives memory: 36K
[    0.319515] smpboot: CPU0: AMD FX(tm)-8300 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.319795] cblist_init_generic: Setting adjustable number of callback queues.
[    0.319798] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.319830] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.319853] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.319875] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.319881] ... version:                0
[    0.319882] ... bit width:              48
[    0.319882] ... generic registers:      6
[    0.319883] ... value mask:             0000ffffffffffff
[    0.319884] ... max period:             00007fffffffffff
[    0.319885] ... fixed-purpose events:   0
[    0.319886] ... event mask:             000000000000003f
[    0.319995] rcu: Hierarchical SRCU implementation.
[    0.319996] rcu: 	Max phase no-delay instances is 1000.
[    0.320498] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.320667] smp: Bringing up secondary CPUs ...
[    0.320841] x86: Booting SMP configuration:
[    0.320843] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.339766] smp: Brought up 1 node, 8 CPUs
[    0.339766] smpboot: Max logical packages: 1
[    0.339766] smpboot: Total of 8 processors activated (52826.20 BogoMIPS)
[    0.341466] devtmpfs: initialized
[    0.341466] x86/mm: Memory block size: 128MB
[    0.341836] ACPI: PM: Registering ACPI NVS region [mem 0xbe3a1000-0xbe8c1fff] (5378048 bytes)
[    0.341836] ACPI: PM: Registering ACPI NVS region [mem 0xbea06000-0xbec0bfff] (2121728 bytes)
[    0.341836] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.341836] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.341836] pinctrl core: initialized pinctrl subsystem
[    0.341836] PM: RTC time: 08:00:52, date: 2022-10-08
[    0.344472] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.344722] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.344871] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.345004] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.345031] audit: initializing netlink subsys (disabled)
[    0.345043] audit: type=2000 audit(1665216052.169:1): state=initialized audit_enabled=0 res=1
[    0.345043] thermal_sys: Registered thermal governor 'fair_share'
[    0.345043] thermal_sys: Registered thermal governor 'bang_bang'
[    0.345043] thermal_sys: Registered thermal governor 'step_wise'
[    0.345043] thermal_sys: Registered thermal governor 'user_space'
[    0.345043] thermal_sys: Registered thermal governor 'power_allocator'
[    0.345043] cpuidle: using governor ladder
[    0.345043] cpuidle: using governor menu
[    0.345043] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
[    0.345043] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.345043] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.345043] PCI: not using MMCONFIG
[    0.345043] PCI: Using configuration type 1 for base access
[    0.345043] PCI: Using configuration type 1 for extended access
[    0.347585] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.350958] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[    0.350958] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.350958] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.351019] ACPI: Added _OSI(Module Device)
[    0.351021] ACPI: Added _OSI(Processor Device)
[    0.351022] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.351023] ACPI: Added _OSI(Processor Aggregator Device)
[    0.351024] ACPI: Added _OSI(Linux-Dell-Video)
[    0.351025] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.351026] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.354806] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.360928] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[    0.360931] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
[    0.361353] ACPI: Interpreter enabled
[    0.361376] ACPI: PM: (supports S0 S1 S4 S5)
[    0.361377] ACPI: Using IOAPIC for interrupt routing
[    0.361590] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.361649] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.361665] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.361667] PCI: Using E820 reservations for host bridge windows
[    0.361908] ACPI: Enabled 10 GPEs in block 00 to 1F
[    0.370026] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.370033] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.370039] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.370041] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.370043] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
[    0.370502] PCI host bridge to bus 0000:00
[    0.370504] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.370506] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.370508] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.370510] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.370512] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.370513] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.370516] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.370533] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.370646] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[    0.370741] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.370759] pci 0000:00:02.0: enabling Extended Tags
[    0.370783] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.370887] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.370903] pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
[    0.370912] pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
[    0.370920] pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
[    0.370928] pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
[    0.370936] pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
[    0.370944] pci 0000:00:11.0: reg 0x24: [mem 0xfea0b000-0xfea0b3ff]
[    0.371049] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.371064] pci 0000:00:12.0: reg 0x10: [mem 0xfea0a000-0xfea0afff]
[    0.371193] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.371208] pci 0000:00:12.2: reg 0x10: [mem 0xfea09000-0xfea090ff]
[    0.371277] pci 0000:00:12.2: supports D1 D2
[    0.371279] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.371358] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.371373] pci 0000:00:13.0: reg 0x10: [mem 0xfea08000-0xfea08fff]
[    0.371517] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.371532] pci 0000:00:13.2: reg 0x10: [mem 0xfea07000-0xfea070ff]
[    0.371601] pci 0000:00:13.2: supports D1 D2
[    0.371602] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.371686] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.371816] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.371835] pci 0000:00:14.2: reg 0x10: [mem 0xfea00000-0xfea03fff 64bit]
[    0.371895] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.371974] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.372100] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.372207] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.372221] pci 0000:00:14.5: reg 0x10: [mem 0xfea06000-0xfea06fff]
[    0.372349] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.372385] pci 0000:00:15.0: enabling Extended Tags
[    0.372428] pci 0000:00:15.0: supports D1 D2
[    0.372517] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.372552] pci 0000:00:15.1: enabling Extended Tags
[    0.372595] pci 0000:00:15.1: supports D1 D2
[    0.372688] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[    0.372752] pci 0000:00:15.3: enabling Extended Tags
[    0.372795] pci 0000:00:15.3: supports D1 D2
[    0.372882] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.372897] pci 0000:00:16.0: reg 0x10: [mem 0xfea05000-0xfea05fff]
[    0.373018] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.373033] pci 0000:00:16.2: reg 0x10: [mem 0xfea04000-0xfea040ff]
[    0.373102] pci 0000:00:16.2: supports D1 D2
[    0.373104] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.373181] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.373231] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.373273] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.373324] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.373369] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.373410] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.373488] pci 0000:01:00.0: [1002:68bf] type 00 class 0x030000
[    0.373501] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.373511] pci 0000:01:00.0: reg 0x18: [mem 0xfe920000-0xfe93ffff 64bit]
[    0.373517] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.373528] pci 0000:01:00.0: reg 0x30: [mem 0xfe900000-0xfe91ffff pref]
[    0.373534] pci 0000:01:00.0: enabling Extended Tags
[    0.373545] pci 0000:01:00.0: BAR 0: assigned to efifb
[    0.373550] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.373576] pci 0000:01:00.0: supports D1 D2
[    0.373641] pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300
[    0.373655] pci 0000:01:00.1: reg 0x10: [mem 0xfe940000-0xfe943fff 64bit]
[    0.373683] pci 0000:01:00.1: enabling Extended Tags
[    0.373718] pci 0000:01:00.1: supports D1 D2
[    0.373786] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.373790] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.373792] pci 0000:00:02.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.373795] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.373807] pci_bus 0000:02: extended config space not accessible
[    0.373863] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[    0.373871] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.373873] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.373875] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.373876] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.373878] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
[    0.373880] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.373964] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.373985] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.374013] pci 0000:03:00.0: reg 0x18: [mem 0xfe800000-0xfe800fff 64bit]
[    0.374031] pci 0000:03:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.374132] pci 0000:03:00.0: supports D1 D2
[    0.374134] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.374253] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.374258] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
[    0.374261] pci 0000:00:15.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.374266] pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.374337] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.374371] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit]
[    0.374532] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.374579] pci 0000:04:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:15.1 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    0.374654] pci 0000:00:15.1: PCI bridge to [bus 04]
[    0.374661] pci 0000:00:15.1:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.374735] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.374768] pci 0000:05:00.0: reg 0x10: [mem 0xfe600000-0xfe607fff 64bit]
[    0.374928] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.374974] pci 0000:05:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:15.3 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    0.375053] pci 0000:00:15.3: PCI bridge to [bus 05]
[    0.375061] pci 0000:00:15.3:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.375479] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.375586] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.375684] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.375783] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.375865] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.375929] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.375991] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.376053] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.376231] iommu: Default domain type: Translated 
[    0.376233] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.376438] SCSI subsystem initialized
[    0.376447] libata version 3.00 loaded.
[    0.376447] ACPI: bus type USB registered
[    0.376447] usbcore: registered new interface driver usbfs
[    0.376447] usbcore: registered new interface driver hub
[    0.376447] usbcore: registered new device driver usb
[    0.376447] pps_core: LinuxPPS API ver. 1 registered
[    0.376447] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.376447] PTP clock support registered
[    0.376447] EDAC MC: Ver: 3.0.0
[    0.376447] Registered efivars operations
[    0.376447] NetLabel: Initializing
[    0.376447] NetLabel:  domain hash size = 128
[    0.376447] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.376447] NetLabel:  unlabeled traffic allowed by default
[    0.376447] mctp: management component transport protocol core
[    0.376447] NET: Registered PF_MCTP protocol family
[    0.376447] PCI: Using ACPI for IRQ routing
[    0.384451] PCI: pci_cache_line_size set to 64 bytes
[    0.384514] e820: reserve RAM buffer [mem 0xaa662018-0xabffffff]
[    0.384516] e820: reserve RAM buffer [mem 0xaa670018-0xabffffff]
[    0.384517] e820: reserve RAM buffer [mem 0xbdf92000-0xbfffffff]
[    0.384519] e820: reserve RAM buffer [mem 0xbe3a1000-0xbfffffff]
[    0.384520] e820: reserve RAM buffer [mem 0xbea06000-0xbfffffff]
[    0.384521] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.384541] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.384541] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.384541] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.384541] vgaarb: loaded
[    0.384541] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.384541] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.385336] clocksource: Switched to clocksource tsc-early
[    0.385538] VFS: Disk quotas dquot_6.6.0
[    0.385569] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.385645] pnp: PnP ACPI init
[    0.385768] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.385893] system 00:01: [io  0x0295-0x0296] has been reserved
[    0.386095] pnp 00:02: [dma 0 disabled]
[    0.386228] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.386645] system 00:06: [io  0x040b] has been reserved
[    0.386648] system 00:06: [io  0x04d6] has been reserved
[    0.386650] system 00:06: [io  0x0c00-0x0c01] has been reserved
[    0.386652] system 00:06: [io  0x0c14] has been reserved
[    0.386653] system 00:06: [io  0x0c50-0x0c51] has been reserved
[    0.386655] system 00:06: [io  0x0c52] has been reserved
[    0.386657] system 00:06: [io  0x0c6c] has been reserved
[    0.386658] system 00:06: [io  0x0c6f] has been reserved
[    0.386660] system 00:06: [io  0x0cd0-0x0cd1] has been reserved
[    0.386662] system 00:06: [io  0x0cd2-0x0cd3] has been reserved
[    0.386664] system 00:06: [io  0x0cd4-0x0cd5] has been reserved
[    0.386670] system 00:06: [io  0x0cd6-0x0cd7] has been reserved
[    0.386672] system 00:06: [io  0x0cd8-0x0cdf] has been reserved
[    0.386673] system 00:06: [io  0x0800-0x089f] has been reserved
[    0.386675] system 00:06: [io  0x0b20-0x0b3f] has been reserved
[    0.386677] system 00:06: [io  0x0900-0x090f] has been reserved
[    0.386679] system 00:06: [io  0x0910-0x091f] has been reserved
[    0.386680] system 00:06: [io  0xfe00-0xfefe] has been reserved
[    0.386683] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.386685] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.386688] system 00:06: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.386690] system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.386692] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.386694] system 00:06: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.386697] system 00:06: [mem 0xffc00000-0xffffffff] has been reserved
[    0.386845] system 00:07: [mem 0xfeb00000-0xfeb03fff] could not be reserved
[    0.386915] system 00:08: [mem 0xfec01000-0xfec010ff] could not be reserved
[    0.386915] pnp: PnP ACPI: found 9 devices
[    0.392579] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.392664] NET: Registered PF_INET protocol family
[    0.392890] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.395083] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.395144] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.395257] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.395535] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.395641] TCP: Hash tables configured (established 65536 bind 65536)
[    0.395780] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.395884] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.395927] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.395988] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.395994] NET: Registered PF_XDP protocol family
[    0.396009] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.396012] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.396016] pci 0000:00:02.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.396019] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.396023] pci 0000:00:14.4: PCI bridge to [bus 02]
[    0.396034] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.396036] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
[    0.396040] pci 0000:00:15.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.396043] pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.396049] pci 0000:00:15.1: PCI bridge to [bus 04]
[    0.396052] pci 0000:00:15.1:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.396059] pci 0000:00:15.3: PCI bridge to [bus 05]
[    0.396063] pci 0000:00:15.3:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.396070] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.396072] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.396074] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.396076] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.396078] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.396079] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window]
[    0.396081] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.396083] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.396085] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.396087] pci_bus 0000:02: resource 4 [io  0x0000-0x03af window]
[    0.396089] pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7 window]
[    0.396090] pci_bus 0000:02: resource 6 [io  0x03b0-0x03df window]
[    0.396092] pci_bus 0000:02: resource 7 [io  0x0d00-0xffff window]
[    0.396094] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.396095] pci_bus 0000:02: resource 9 [mem 0xc0000000-0xffffffff window]
[    0.396097] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.396099] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.396100] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.396102] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.396105] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.397258] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.397338] pci 0000:04:00.0: enabling device (0000 -> 0002)
[    0.397498] pci 0000:05:00.0: enabling device (0000 -> 0002)
[    0.397594] PCI: CLS 64 bytes, default 64
[    0.397666] Trying to unpack rootfs image as initramfs...
[    0.397886] pci 0000:00:00.0: Adding to iommu group 0
[    0.397901] pci 0000:00:02.0: Adding to iommu group 1
[    0.397918] pci 0000:00:11.0: Adding to iommu group 2
[    0.397944] pci 0000:00:12.0: Adding to iommu group 3
[    0.397956] pci 0000:00:12.2: Adding to iommu group 3
[    0.397978] pci 0000:00:13.0: Adding to iommu group 4
[    0.397990] pci 0000:00:13.2: Adding to iommu group 4
[    0.398003] pci 0000:00:14.0: Adding to iommu group 5
[    0.398020] pci 0000:00:14.2: Adding to iommu group 6
[    0.398035] pci 0000:00:14.3: Adding to iommu group 7
[    0.398049] pci 0000:00:14.4: Adding to iommu group 8
[    0.398062] pci 0000:00:14.5: Adding to iommu group 9
[    0.398093] pci 0000:00:15.0: Adding to iommu group 10
[    0.398106] pci 0000:00:15.1: Adding to iommu group 10
[    0.398120] pci 0000:00:15.3: Adding to iommu group 10
[    0.398148] pci 0000:00:16.0: Adding to iommu group 11
[    0.398162] pci 0000:00:16.2: Adding to iommu group 11
[    0.398208] pci 0000:01:00.0: Adding to iommu group 12
[    0.398223] pci 0000:01:00.1: Adding to iommu group 12
[    0.398229] pci 0000:03:00.0: Adding to iommu group 10
[    0.398234] pci 0000:04:00.0: Adding to iommu group 10
[    0.398244] pci 0000:05:00.0: Adding to iommu group 10
[    0.440735] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.440740] AMD-Vi: Interrupt remapping enabled
[    0.440900] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.440901] software IO TLB: mapped [mem 0x00000000ac7d4000-0x00000000b07d4000] (64MB)
[    0.440941] LVT offset 0 assigned for vector 0x400
[    0.441035] perf: AMD IBS detected (0x000000ff)
[    0.442406] Initialise system trusted keyrings
[    0.442421] Key type blacklist registered
[    0.442482] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.444297] zbud: loaded
[    0.444561] integrity: Platform Keyring initialized
[    0.444567] integrity: Machine keyring initialized
[    0.454960] Key type asymmetric registered
[    0.454962] Asymmetric key parser 'x509' registered
[    0.480841] Freeing initrd memory: 11672K
[    0.483566] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.483597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.483669] io scheduler mq-deadline registered
[    0.483672] io scheduler kyber registered
[    0.483717] io scheduler bfq registered
[    0.484742] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.484869] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.484917] ACPI: button: Power Button [PWRB]
[    0.484955] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.484994] ACPI: button: Power Button [PWRF]
[    0.485039] ACPI: \_PR_.P001: Found 2 idle states
[    0.485132] ACPI: \_PR_.P002: Found 2 idle states
[    0.485206] ACPI: \_PR_.P003: Found 2 idle states
[    0.485339] ACPI: \_PR_.P004: Found 2 idle states
[    0.485463] ACPI: \_PR_.P005: Found 2 idle states
[    0.485534] ACPI: \_PR_.P006: Found 2 idle states
[    0.485657] ACPI: \_PR_.P007: Found 2 idle states
[    0.485772] ACPI: \_PR_.P008: Found 2 idle states
[    0.486106] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.486241] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.488470] Non-volatile memory driver v1.3
[    0.488471] Linux agpgart interface v0.103
[    0.488473] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.488503] ACPI: bus type drm_connector registered
[    0.489352] ahci 0000:00:11.0: version 3.0
[    0.489530] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.489534] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    0.490167] scsi host0: ahci
[    0.490318] scsi host1: ahci
[    0.490439] scsi host2: ahci
[    0.490561] scsi host3: ahci
[    0.490679] scsi host4: ahci
[    0.490799] scsi host5: ahci
[    0.490845] ata1: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b100 irq 19
[    0.490849] ata2: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b180 irq 19
[    0.490851] ata3: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b200 irq 19
[    0.490853] ata4: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b280 irq 19
[    0.490855] ata5: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b300 irq 19
[    0.490857] ata6: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b380 irq 19
[    0.490947] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.490952] ehci-pci: EHCI PCI platform driver
[    0.491049] QUIRK: Enable AMD PLL fix
[    0.491072] ehci-pci 0000:00:12.2: EHCI Host Controller
[    0.491078] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    0.491083] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.491091] ehci-pci 0000:00:12.2: debug port 1
[    0.491139] ehci-pci 0000:00:12.2: irq 17, io mem 0xfea09000
[    0.501610] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.501688] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[    0.501691] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.501693] usb usb1: Product: EHCI Host Controller
[    0.501695] usb usb1: Manufacturer: Linux 5.19.13-arch1-1 ehci_hcd
[    0.501696] usb usb1: SerialNumber: 0000:00:12.2
[    0.501821] hub 1-0:1.0: USB hub found
[    0.501830] hub 1-0:1.0: 5 ports detected
[    0.502132] ehci-pci 0000:00:13.2: EHCI Host Controller
[    0.502138] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    0.502141] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.502149] ehci-pci 0000:00:13.2: debug port 1
[    0.502185] ehci-pci 0000:00:13.2: irq 17, io mem 0xfea07000
[    0.514943] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.515008] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[    0.515011] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.515013] usb usb2: Product: EHCI Host Controller
[    0.515015] usb usb2: Manufacturer: Linux 5.19.13-arch1-1 ehci_hcd
[    0.515016] usb usb2: SerialNumber: 0000:00:13.2
[    0.515129] hub 2-0:1.0: USB hub found
[    0.515136] hub 2-0:1.0: 5 ports detected
[    0.515385] ehci-pci 0000:00:16.2: EHCI Host Controller
[    0.515394] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    0.515398] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.515406] ehci-pci 0000:00:16.2: debug port 1
[    0.515440] ehci-pci 0000:00:16.2: irq 17, io mem 0xfea04000
[    0.528280] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    0.528333] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[    0.528336] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.528338] usb usb3: Product: EHCI Host Controller
[    0.528339] usb usb3: Manufacturer: Linux 5.19.13-arch1-1 ehci_hcd
[    0.528341] usb usb3: SerialNumber: 0000:00:16.2
[    0.528446] hub 3-0:1.0: USB hub found
[    0.528453] hub 3-0:1.0: 4 ports detected
[    0.528598] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.528604] ohci-pci: OHCI PCI platform driver
[    0.528716] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    0.528722] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    0.528776] ohci-pci 0000:00:12.0: irq 18, io mem 0xfea0a000
[    0.589019] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[    0.589022] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.589024] usb usb4: Product: OHCI PCI host controller
[    0.589025] usb usb4: Manufacturer: Linux 5.19.13-arch1-1 ohci_hcd
[    0.589027] usb usb4: SerialNumber: 0000:00:12.0
[    0.589125] hub 4-0:1.0: USB hub found
[    0.589135] hub 4-0:1.0: 5 ports detected
[    0.589378] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    0.589386] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    0.589413] ohci-pci 0000:00:13.0: irq 18, io mem 0xfea08000
[    0.649007] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[    0.649010] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.649012] usb usb5: Product: OHCI PCI host controller
[    0.649013] usb usb5: Manufacturer: Linux 5.19.13-arch1-1 ohci_hcd
[    0.649015] usb usb5: SerialNumber: 0000:00:13.0
[    0.649121] hub 5-0:1.0: USB hub found
[    0.649130] hub 5-0:1.0: 5 ports detected
[    0.649374] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    0.649380] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    0.649402] ohci-pci 0000:00:14.5: irq 18, io mem 0xfea06000
[    0.709012] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[    0.709016] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.709017] usb usb6: Product: OHCI PCI host controller
[    0.709019] usb usb6: Manufacturer: Linux 5.19.13-arch1-1 ohci_hcd
[    0.709020] usb usb6: SerialNumber: 0000:00:14.5
[    0.709126] hub 6-0:1.0: USB hub found
[    0.709135] hub 6-0:1.0: 2 ports detected
[    0.709342] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    0.709348] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    0.709401] ohci-pci 0000:00:16.0: irq 18, io mem 0xfea05000
[    0.769022] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[    0.769025] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.769027] usb usb7: Product: OHCI PCI host controller
[    0.769028] usb usb7: Manufacturer: Linux 5.19.13-arch1-1 ohci_hcd
[    0.769030] usb usb7: SerialNumber: 0000:00:16.0
[    0.769133] hub 7-0:1.0: USB hub found
[    0.769142] hub 7-0:1.0: 4 ports detected
[    0.769318] uhci_hcd: USB Universal Host Controller Interface driver
[    0.769373] usbcore: registered new interface driver usbserial_generic
[    0.769378] usbserial: USB Serial support registered for generic
[    0.769470] rtc_cmos 00:03: RTC can wake from S4
[    0.769686] rtc_cmos 00:03: registered as rtc0
[    0.769711] rtc_cmos 00:03: setting system clock to 2022-10-08T08:00:52 UTC (1665216052)
[    0.769726] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.769861] ledtrig-cpu: registered to indicate activity on CPUs
[    0.770083] efifb: probing for efifb
[    0.770092] efifb: No BGRT, not showing boot graphics
[    0.770093] efifb: framebuffer at 0xc0000000, using 1876k, total 1875k
[    0.770094] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.770096] efifb: scrolling: redraw
[    0.770097] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.770140] fbcon: Deferring console take-over
[    0.770141] fb0: EFI VGA frame buffer device
[    0.770165] hid: raw HID events driver (C) Jiri Kosina
[    0.770247] drop_monitor: Initializing network drop monitor service
[    0.782985] Initializing XFRM netlink socket
[    0.783131] NET: Registered PF_INET6 protocol family
[    0.786225] Segment Routing with IPv6
[    0.786228] RPL Segment Routing with IPv6
[    0.786245] In-situ OAM (IOAM) with IPv6
[    0.786289] NET: Registered PF_PACKET protocol family
[    0.786341] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[    0.786779] microcode: CPU0: patch_level=0x06000822
[    0.786786] microcode: CPU1: patch_level=0x06000822
[    0.786790] microcode: CPU2: patch_level=0x06000822
[    0.786796] microcode: CPU3: patch_level=0x06000822
[    0.786803] microcode: CPU4: patch_level=0x06000822
[    0.786810] microcode: CPU5: patch_level=0x06000822
[    0.786816] microcode: CPU6: patch_level=0x06000822
[    0.786824] microcode: CPU7: patch_level=0x06000822
[    0.786827] microcode: Microcode Update Driver: v2.2.
[    0.786832] IPI shorthand broadcast: enabled
[    0.786861] sched_clock: Marking stable (749755397, 36948622)->(801275189, -14571170)
[    0.787241] registered taskstats version 1
[    0.787439] Loading compiled-in X.509 certificates
[    0.791683] Loaded X.509 cert 'Build time autogenerated kernel key: 910b1472de293414b63436b7aab17105d119a30e'
[    0.792237] zswap: loaded using pool lz4/z3fold
[    0.792404] Key type ._fscrypt registered
[    0.792405] Key type .fscrypt registered
[    0.792406] Key type fscrypt-provisioning registered
[    0.794577] PM:   Magic number: 10:433:17
[    0.794732] RAS: Correctable Errors collector initialized.
[    0.801610] ata3: SATA link down (SStatus 0 SControl 300)
[    0.804115] ata5: SATA link down (SStatus 0 SControl 300)
[    0.804943] ata4: SATA link down (SStatus 0 SControl 300)
[    0.805500] ata6: SATA link down (SStatus 0 SControl 300)
[    0.968266] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.968962] ata2.00: supports DRM functions and may not be fully accessible
[    0.968964] ata2.00: ATA-9: ST500DM002-1ER14C, CC43, max UDMA/133
[    0.969150] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.970556] ata2.00: Features: Trust
[    0.970773] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.971330] ata2.00: supports DRM functions and may not be fully accessible
[    0.972912] ata2.00: configured for UDMA/133
[    0.978337] ata1.00: ATA-11: GLOWAY FER120GS3-S7, SN08710, max UDMA/133
[    0.978371] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    0.978626] ata1.00: configured for UDMA/133
[    0.978803] scsi 0:0:0:0: Direct-Access     ATA      GLOWAY FER120GS3 710  PQ: 0 ANSI: 5
[    0.979199] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    0.979217] sd 0:0:0:0: [sda] Write Protect is off
[    0.979221] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.979250] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.979268] scsi 1:0:0:0: Direct-Access     ATA      ST500DM002-1ER14 CC43 PQ: 0 ANSI: 5
[    0.979290] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    0.979643] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    0.979646] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    0.979663] sd 1:0:0:0: [sdb] Write Protect is off
[    0.979666] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.979694] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.979757] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    0.993189]  sda: sda1 sda2 sda3 sda4 sda5
[    0.993417] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.032445] usb 4-2: new full-speed USB device number 2 using ohci-pci
[    1.049112] usb 5-2: new full-speed USB device number 2 using ohci-pci
[    1.069311]  sdb: sdb1 sdb2 sdb3
[    1.069735] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.071979] Freeing unused decrypted memory: 2036K
[    1.072533] Freeing unused kernel image (initmem) memory: 2116K
[    1.084922] Write protecting the kernel read-only data: 28672k
[    1.085548] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    1.085886] Freeing unused kernel image (rodata/data gap) memory: 1112K
[    1.130946] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.130951] rodata_test: all tests were successful
[    1.130955] Run /init as init process
[    1.130957]   with arguments:
[    1.130958]     /init
[    1.130959]   with environment:
[    1.130960]     HOME=/
[    1.130961]     TERM=linux
[    1.149611] fbcon: Taking over console
[    1.149697] Console: switching to colour frame buffer device 100x37
[    1.224146] usb 4-2: New USB device found, idVendor=046d, idProduct=c068, bcdDevice=58.02
[    1.224168] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.224171] usb 4-2: Product: G500
[    1.224173] usb 4-2: Manufacturer: Logitech
[    1.224175] usb 4-2: SerialNumber: D99DF683110018
[    1.250474] usb 5-2: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=15.00
[    1.250478] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.250481] usb 5-2: Product: USB Receiver
[    1.250483] usb 5-2: Manufacturer: Logitech
[    1.307423] [drm] radeon kernel modesetting enabled.
[    1.307594] Console: switching to colour dummy device 80x25
[    1.307626] radeon 0000:01:00.0: vgaarb: deactivate vga console
[    1.307826] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BF 0x1787:0x2313 0x00).
[    1.307905] ATOM BIOS: JUNIPER
[    1.307956] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.307960] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.307964] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.307965] [drm] RAM width 128bits DDR
[    1.307989] [drm] radeon: 1024M of VRAM memory ready
[    1.307991] [drm] radeon: 1024M of GTT memory ready.
[    1.308001] [drm] Loading JUNIPER Microcode
[    1.311438] input: Logitech G500 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:046D:C068.0001/input/input2
[    1.311543] hid-generic 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:12.0-2/input0
[    1.316143] [drm] Internal thermal controller with fan control
[    1.318652] input: Logitech G500 Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:046D:C068.0002/input/input3
[    1.344493] [drm] radeon: dpm initialized
[    1.352299] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.353141] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.365140] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[    1.365221] radeon 0000:01:00.0: WB enabled
[    1.365224] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[    1.365226] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[    1.365589] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418
[    1.365834] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.365887] radeon 0000:01:00.0: radeon: using MSI.
[    1.365909] [drm] radeon: irq initialized.
[    1.374373] hid-generic 0003:046D:C068.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:12.0-2/input1
[    1.377775] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:046D:C52E.0003/input/input6
[    1.382178] [drm] ring test on 0 succeeded in 1 usecs
[    1.382185] [drm] ring test on 3 succeeded in 3 usecs
[    1.434401] hid-generic 0003:046D:C52E.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-2/input0
[    1.439067] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:046D:C52E.0004/input/input7
[    1.439150] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:046D:C52E.0004/input/input8
[    1.450889] tsc: Refined TSC clocksource calibration: 3300.226 MHz
[    1.450904] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f922190691, max_idle_ns: 440795249522 ns
[    1.450937] clocksource: Switched to clocksource tsc
[    1.494310] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:046D:C52E.0004/input/input9
[    1.494413] hid-generic 0003:046D:C52E.0004: input,hiddev97,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-2/input1
[    1.494447] usbcore: registered new interface driver usbhid
[    1.494449] usbhid: USB HID core driver
[    1.569320] [drm] ring test on 5 succeeded in 1 usecs
[    1.569326] [drm] UVD initialized successfully.
[    1.569578] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.569629] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.250937] [drm] ib test on ring 5 succeeded
[    2.251369] [drm] Radeon Display Connectors
[    2.251371] [drm] Connector 0:
[    2.251372] [drm]   HDMI-A-1
[    2.251372] [drm]   HPD2
[    2.251373] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    2.251375] [drm]   Encoders:
[    2.251376] [drm]     DFP1: INTERNAL_UNIPHY2
[    2.251377] [drm] Connector 1:
[    2.251378] [drm]   DVI-I-1
[    2.251379] [drm]   HPD1
[    2.251379] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    2.251381] [drm]   Encoders:
[    2.251382] [drm]     DFP2: INTERNAL_UNIPHY1
[    2.251383] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.251383] [drm] Connector 2:
[    2.251384] [drm]   VGA-1
[    2.251385] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    2.251387] [drm]   Encoders:
[    2.251387] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.345008] [drm] fb mappable at 0xC034D000
[    2.345011] [drm] vram apper at 0xC0000000
[    2.345012] [drm] size 9216000
[    2.345012] [drm] fb depth is 24
[    2.345013] [drm]    pitch is 7680
[    2.345084] fbcon: radeondrmfb (fb0) is primary device
[    2.398877] Console: switching to colour frame buffer device 180x56
[    2.400159] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device
[    2.414296] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    2.534449] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    2.534460] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[    2.541430] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[    2.541943] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    2.541949] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
[    2.541955] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[    2.546787] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[    2.546792] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.546794] usb usb8: Product: xHCI Host Controller
[    2.546796] usb usb8: Manufacturer: Linux 5.19.13-arch1-1 xhci-hcd
[    2.546797] usb usb8: SerialNumber: 0000:04:00.0
[    2.546930] hub 8-0:1.0: USB hub found
[    2.546943] hub 8-0:1.0: 2 ports detected
[    2.547085] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.547122] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
[    2.547126] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.547128] usb usb9: Product: xHCI Host Controller
[    2.547131] usb usb9: Manufacturer: Linux 5.19.13-arch1-1 xhci-hcd
[    2.547133] usb usb9: SerialNumber: 0000:04:00.0
[    2.547245] hub 9-0:1.0: USB hub found
[    2.547284] hub 9-0:1.0: 2 ports detected
[    2.547481] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.547486] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[    2.554442] xhci_hcd 0000:05:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[    2.554855] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.554858] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 11
[    2.554861] xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed
[    2.559704] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[    2.559708] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.559710] usb usb10: Product: xHCI Host Controller
[    2.559711] usb usb10: Manufacturer: Linux 5.19.13-arch1-1 xhci-hcd
[    2.559713] usb usb10: SerialNumber: 0000:05:00.0
[    2.559823] hub 10-0:1.0: USB hub found
[    2.559834] hub 10-0:1.0: 2 ports detected
[    2.559937] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.559965] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
[    2.559968] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.559970] usb usb11: Product: xHCI Host Controller
[    2.559971] usb usb11: Manufacturer: Linux 5.19.13-arch1-1 xhci-hcd
[    2.559972] usb usb11: SerialNumber: 0000:05:00.0
[    2.560071] hub 11-0:1.0: USB hub found
[    2.560082] hub 11-0:1.0: 2 ports detected
[    3.045923] EXT4-fs (sda5): mounted filesystem with ordered data mode. Quota mode: none.
[    3.187875] random: crng init done
[    3.187886] systemd[1]: Successfully credited entropy passed from boot loader.
[    3.189631] systemd[1]: systemd 251.5-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    3.189636] systemd[1]: Detected architecture x86-64.
[    3.191030] systemd[1]: Hostname set to <Sumerlands>.
[    3.442851] systemd[1]: Queued start job for default target Graphical Interface.
[    3.443849] systemd[1]: Created slice Slice /system/getty.
[    3.444276] systemd[1]: Created slice Slice /system/modprobe.
[    3.444674] systemd[1]: Created slice Slice /system/systemd-fsck.
[    3.444987] systemd[1]: Created slice User and Session Slice.
[    3.445130] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.445262] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.445490] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.445609] systemd[1]: Reached target Local Encrypted Volumes.
[    3.445699] systemd[1]: Reached target Local Integrity Protected Volumes.
[    3.445795] systemd[1]: Reached target Path Units.
[    3.445880] systemd[1]: Reached target Remote File Systems.
[    3.445964] systemd[1]: Reached target Slice Units.
[    3.446054] systemd[1]: Reached target Swaps.
[    3.446140] systemd[1]: Reached target Local Verity Protected Volumes.
[    3.446280] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.446684] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.448096] systemd[1]: Listening on Process Core Dump Socket.
[    3.448318] systemd[1]: Listening on Journal Audit Socket.
[    3.448498] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.448679] systemd[1]: Listening on Journal Socket.
[    3.449082] systemd[1]: Listening on udev Control Socket.
[    3.449267] systemd[1]: Listening on udev Kernel Socket.
[    3.450211] systemd[1]: Mounting Huge Pages File System...
[    3.451076] systemd[1]: Mounting POSIX Message Queue File System...
[    3.452153] systemd[1]: Mounting Kernel Debug File System...
[    3.453354] systemd[1]: Mounting Kernel Trace File System...
[    3.455405] systemd[1]: Mounting Temporary Directory /tmp...
[    3.456463] systemd[1]: Starting Create List of Static Device Nodes...
[    3.457405] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.458416] systemd[1]: Starting Load Kernel Module configfs...
[    3.459427] systemd[1]: Starting Load Kernel Module drm...
[    3.460495] systemd[1]: Starting Load Kernel Module fuse...
[    3.460666] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[    3.462333] systemd[1]: Starting Journal Service...
[    3.464390] systemd[1]: Starting Load Kernel Modules...
[    3.465502] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.465681] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[    3.466776] systemd[1]: Starting Coldplug All udev Devices...
[    3.469035] systemd[1]: Mounted Huge Pages File System.
[    3.469322] systemd[1]: Mounted POSIX Message Queue File System.
[    3.469525] systemd[1]: Mounted Kernel Debug File System.
[    3.469719] systemd[1]: Mounted Kernel Trace File System.
[    3.469917] systemd[1]: Mounted Temporary Directory /tmp.
[    3.470332] systemd[1]: Finished Create List of Static Device Nodes.
[    3.470826] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    3.471015] systemd[1]: Finished Load Kernel Module configfs.
[    3.471374] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    3.471510] systemd[1]: Finished Load Kernel Module drm.
[    3.472803] systemd[1]: Mounting Kernel Configuration File System...
[    3.474322] EXT4-fs (sda5): re-mounted. Quota mode: none.
[    3.475614] systemd[1]: Finished Remount Root and Kernel File Systems.
[    3.477157] systemd[1]: Mounted Kernel Configuration File System.
[    3.477342] fuse: init (API version 7.36)
[    3.478697] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    3.478859] systemd[1]: Finished Load Kernel Module fuse.
[    3.481230] systemd[1]: Mounting FUSE Control File System...
[    3.482693] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
[    3.483130] systemd[1]: Rebuild Hardware Database was skipped because all trigger condition checks failed.
[    3.484187] systemd[1]: Starting Load/Save Random Seed...
[    3.486977] systemd[1]: Starting Create System Users...
[    3.490365] systemd[1]: Finished Load Kernel Modules.
[    3.491585] audit: type=1130 audit(1665216055.217:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.491696] systemd[1]: Mounted FUSE Control File System.
[    3.493042] systemd[1]: Finished Load/Save Random Seed.
[    3.494071] audit: type=1130 audit(1665216055.217:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.494234] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
[    3.495159] systemd[1]: Starting Apply Kernel Variables...
[    3.503063] systemd[1]: Finished Apply Kernel Variables.
[    3.504220] audit: type=1130 audit(1665216055.227:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.504522] systemd[1]: Finished Create System Users.
[    3.505640] audit: type=1130 audit(1665216055.231:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.506666] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.534305] systemd[1]: Finished Create Static Device Nodes in /dev.
[    3.535421] audit: type=1130 audit(1665216055.261:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.535885] audit: type=1334 audit(1665216055.261:7): prog-id=9 op=LOAD
[    3.535920] audit: type=1334 audit(1665216055.261:8): prog-id=10 op=LOAD
[    3.536429] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    3.552832] systemd[1]: Started Journal Service.
[    3.554377] audit: type=1130 audit(1665216055.281:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.556543] audit: type=1130 audit(1665216055.281:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.563733] systemd-journald[281]: Received client request to flush runtime journal.
[    3.713547] acpi_cpufreq: overriding BIOS provided _PSD data
[    3.721783] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    3.721794] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[    3.726192] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    3.738857] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    3.744528] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    3.744739] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    3.773149] mousedev: PS/2 mouse device common for all mice
[    3.843953] cryptd: max_cpu_qlen set to 1000
[    3.844659] input: PC Speaker as /devices/platform/pcspkr/input/input12
[    3.853196] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.861458] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, dc:9c:52:19:5d:07, XID 2c9, IRQ 49
[    3.861464] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    3.874410] AVX version of gcm_enc/dec engaged.
[    3.874464] AES CTR mode by8 optimization enabled
[    3.892364] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    4.044872] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[    4.120500] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Quota mode: none.
[    4.219231] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    4.219239] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.219241] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.219244] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.219245] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    4.219247] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.219249] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    4.219251] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    4.219252] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    4.219254] snd_hda_codec_realtek hdaudioC0D0:    dig-in=0x1f
[    4.265192] SVM: TSC scaling supported
[    4.265196] kvm: Nested Virtualization enabled
[    4.265197] SVM: kvm: Nested Paging enabled
[    4.265208] SVM: LBR virtualization supported
[    4.266010] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    4.266245] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[    4.266544] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[    4.266830] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[    4.267074] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[    4.267315] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[    4.267529] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[    4.267752] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[    4.292303] MCE: In-kernel MCE decoding enabled.
[    4.583439] 8021q: 802.1Q VLAN Support v1.8
[    4.746613] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.747081] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.787892] RTL8211E Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[    5.032656] r8169 0000:03:00.0 enp3s0: Link is Down
[    9.083903] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[    9.083924] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   13.083315] kauditd_printk_skb: 24 callbacks suppressed
[   13.083322] audit: type=1100 audit(1665216064.807:35): pid=431 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="byteforce" exe="/usr/bin/login" hostname=Sumerlands addr=? terminal=/dev/tty1 res=success'
[   13.091774] audit: type=1101 audit(1665216064.817:36): pid=431 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="byteforce" exe="/usr/bin/login" hostname=Sumerlands addr=? terminal=/dev/tty1 res=success'
[   13.138478] audit: type=1103 audit(1665216064.864:37): pid=431 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="byteforce" exe="/usr/bin/login" hostname=Sumerlands addr=? terminal=/dev/tty1 res=success'
[   13.138623] audit: type=1006 audit(1665216064.864:38): pid=431 uid=0 old-auid=4294967295 auid=1001 tty=tty1 old-ses=4294967295 ses=1 res=1
[   13.138644] audit: type=1300 audit(1665216064.864:38): arch=c000003e syscall=1 success=yes exit=4 a0=5 a1=7fffe3f67f70 a2=4 a3=7fffe3f67c84 items=0 ppid=1 pid=431 auid=1001 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=1001 fsgid=0 tty=tty1 ses=1 comm="login" exe="/usr/bin/login" key=(null)
[   13.138654] audit: type=1327 audit(1665216064.864:38): proctitle=2F62696E2F6C6F67696E002D70002D2D
[   13.171374] audit: type=1130 audit(1665216064.897:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1001 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.182366] audit: type=1101 audit(1665216064.907:40): pid=481 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="byteforce" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.182400] audit: type=1103 audit(1665216064.907:41): pid=481 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="byteforce" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   13.182482] audit: type=1006 audit(1665216064.907:42): pid=481 uid=0 old-auid=4294967295 auid=1001 tty=(none) old-ses=4294967295 ses=2 res=1
[   26.442412] kauditd_printk_skb: 6 callbacks suppressed
[   26.442416] audit: type=1334 audit(1665216078.167:47): prog-id=15 op=LOAD
[   26.442435] audit: type=1334 audit(1665216078.167:48): prog-id=16 op=LOAD
[   26.489370] audit: type=1334 audit(1665216078.214:49): prog-id=17 op=LOAD
[   26.508678] audit: type=1130 audit(1665216078.234:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.529390] audit: type=1130 audit(1665216078.254:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.539797] audit: type=1130 audit(1665216078.264:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.559505] audit: type=1130 audit(1665216078.284:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.637207] audit: type=1130 audit(1665216078.361:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   86.976442] audit: type=1131 audit(1665216138.004:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  259.866702] audit: type=1101 audit(1665216311.721:56): pid=1308 uid=1001 auid=1001 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="byteforce" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success'
[  259.867449] audit: type=1110 audit(1665216311.724:57): pid=1308 uid=1001 auid=1001 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success'
[  259.867570] audit: type=1105 audit(1665216311.724:58): pid=1308 uid=1001 auid=1001 ses=1 msg='op=PAM:session_open grantors=pam_systemd_home,pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success'

Last edited by Sumerlands (2022-10-08 08:33:46)

Offline

#3 2022-11-28 18:19:19

Sumerlands
Member
Registered: 2022-10-03
Posts: 4

Re: When suspend exit, computer snow screen.

anyone? thx.

Offline

#4 2022-11-28 18:30:23

seth
Member
Registered: 2012-09-03
Posts: 49,981

Re: When suspend exit, computer snow screen.

Looks like invald(ated) textures - do you get the same when suspending from an openbox/x11 session w/
1. no composositor
2. picom/xrender
3. picom/glx

Does it clear when you switch the VT forth and back?

Also try

radeon.dpm=0 radeon.aspm=0 radeon.runpm=0 radeon.bapm=0

https://wiki.archlinux.org/title/Kernel_parameters

Finally, why are you running on radeon and not amdgpu?
(Juniper should be a northern island chip?)

Edit, no wait - could also be the even older Evergreen?
No idea why amdgpu is listed as supported kernel module

Last edited by seth (2022-11-28 18:36:20)

Online

#5 2022-11-28 23:24:56

2ManyDogs
Forum Moderator
Registered: 2012-01-15
Posts: 4,645

Re: When suspend exit, computer snow screen.

Sumerlands wrote:

anyone? thx.

Don't do that. https://wiki.archlinux.org/title/Genera … es#Bumping


How to post. A sincere effort to use modest and proper language and grammar is a sign of respect toward the community.

Offline

Board footer

Powered by FluxBB