You are not logged in.

Pages: 1

#1 2022-11-05 03:14:17

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

[SOLVED] usb ethernet adapter detected but no connection

hey guys, I have tried to connect my usb ethernet adapter but unfortunately it has no connection at all. I have installed usb_modeswitch but doesn't had done any configuration or command with it to try to solve, I just don't know what to do, and I guess that isn't a driver problem right, if it is detected and appears on sys/class/net and stuff. Thx in advance. (シ_ _)シ

Here are some logs.

ls sys/class/net >

kaneda@heaven:~$ ls /sys/class/net/
enp0s20f0u1c2  enp3s0  lo  wlp2s0

dmesg >

[  821.821729] usb 1-1: new high-speed USB device number 6 using xhci_hcd
[  821.962574] usb 1-1: New USB device found, idVendor=0fe6, idProduct=9900, bcdDevice=20.00
[  821.962579] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  821.962581] usb 1-1: Product: 10/100M LAN
[  821.962583] usb 1-1: Manufacturer: CoreChips
[  821.962584] usb 1-1: SerialNumber: 00E0813236ED
[  821.965428] cdc_ether 1-1:2.0 eth0: register 'cdc_ether' at usb-0000:00:14.0-1, CDC Ethernet Device, 00:e0:81:32:36:ed
[  821.971394] cdc_ether 1-1:2.0 enp0s20f0u1c2: renamed from eth0

lsub >

Bus 001 Device 006: ID 0fe6:9900 ICS Advent 10/100M LAN
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x0fe6 ICS Advent
  idProduct          0x9900 
  bcdDevice           20.00
  iManufacturer           1 CoreChips
  iProduct                2 10/100M LAN
  iSerial                 3 00E0813236ED
  bNumConfigurations      2
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0027
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               8
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0050
    bNumInterfaces          2
    bConfigurationValue     2
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
Bus 001 Device 006: ID 0fe6:9900 ICS Advent 10/100M LAN
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0fe6 ICS Advent
  idProduct          0x9900
  bcdDevice           20.00
  iManufacturer           1 CoreChips
  iProduct                2 10/100M LAN
  iSerial                 3 00E0813236ED
  bNumConfigurations      2
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0027
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               8
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0050
    bNumInterfaces          2
    bConfigurationValue     2
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      6 Ethernet Networking
      bInterfaceProtocol      0
      iInterface              5
      CDC Header:
        bcdCDC               1.10
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC Ethernet:
        iMacAddress                      3 (??)
        bmEthernetStatistics    0x00000000
        wMaxSegmentSize               1514
        wNumberMCFilters            0x0000
        bNumberPowerFilters              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval               8
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              4
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Last edited by young_kaneda (2022-11-08 23:29:50)

Offline

#2 2022-11-05 03:20:19

Scimmia
Fellow
Registered: 2012-09-01
Posts: 12,748

Re: [SOLVED] usb ethernet adapter detected but no connection

https://wiki.archlinux.org/title/Network_configuration

Offline

#3 2022-11-05 03:48:49

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

Re: [SOLVED] usb ethernet adapter detected but no connection

Scimmia wrote:

?? which part of it ?? I have no problem with wifi and already tried to use dhcpd to get an address for the adapter interface but still yet not internet connection? Are any other things there that I should know to solve the problem?

Offline

#4 2022-11-05 04:20:54

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 7,167

Re: [SOLVED] usb ethernet adapter detected but no connection

wiki wrote:

Check the connection
To troubleshoot a network connection, go through the following conditions and ensure that you meet them:

CLI Paste | How To Ask Questions

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#5 2022-11-05 04:33:39

Scimmia
Fellow
Registered: 2012-09-01
Posts: 12,748

Re: [SOLVED] usb ethernet adapter detected but no connection

young_kaneda wrote:
Scimmia wrote:

?? which part of it ?? I have no problem with wifi and already tried to use dhcpd to get an address for the adapter interface but still yet not internet connection? Are any other things there that I should know to solve the problem?

Well you had told us nothing about doing any kind of configuration, so...

If you actually used dhcpd instead of dhcpcd, that could be your problem.

Offline

#6 2022-11-05 07:22:19

seth
Member
Registered: 2012-09-03
Posts: 64,523

Re: [SOLVED] usb ethernet adapter detected but no connection

ip a
ethtool enp0s20f0u1c2
sudo journalctl -b | curl -F 'file=@-' 0x0.st

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#7 2022-11-05 21:43:38

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

Re: [SOLVED] usb ethernet adapter detected but no connection

ethtool >

kaneda@heaven:~$ sudo ethtool enp0s20f0u1c2
Settings for enp0s20f0u1c2:
	Supported ports: [  ]
	Supported link modes:   Not reported
	Supported pause frame use: No
	Supports auto-negotiation: No
	Supported FEC modes: Not reported
	Advertised link modes:  Not reported
	Advertised pause frame use: No
	Advertised auto-negotiation: No
	Advertised FEC modes: Not reported
	Speed: 100Mb/s
	Duplex: Half
	Auto-negotiation: off
	Port: Twisted Pair
	PHYAD: 0
	Transceiver: internal
	MDI-X: Unknown
        Current message level: 0x00000007 (7)
                               drv probe link
	Link detected: yes

journalctl > https://0x0.st/oEZi.txt

ip address show >

4: enp0s20f0u1c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 00:e0:81:32:36:ed brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.19/24 brd 192.168.1.255 scope global dynamic noprefixroute enp0s20f0u1c2
       valid_lft 10696sec preferred_lft 10696sec
    inet6 2804:29b8:508c:3cf2:df97:cdbd:7562:8ebd/64 scope global dynamic noprefixroute 
       valid_lft 259197sec preferred_lft 172797sec
    inet6 fe80::c4e4:2a24:2fed:e38a/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

Offline

#8 2022-11-05 21:47:48

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

Re: [SOLVED] usb ethernet adapter detected but no connection

Actually here is the log for dhcpcd.

kaneda@heaven:~$ sudo dhcpcd enp0s20f0u1c2
dhcpcd-9.4.1 starting
DUID 00:04:4c:4c:45:44:00:32:30:10:80:4d:c4:c0:4f:53:4c:32
dhcp6_openudp: Address already in use
ps_inet_listenin6: Address already in use
ps_root_recvmsg: Address already in use
enp0s20f0u1c2: IAID 81:32:36:ed
enp0s20f0u1c2: soliciting an IPv6 router
enp0s20f0u1c2: soliciting a DHCP lease
enp0s20f0u1c2: offered 192.168.1.19 from 192.168.1.1
enp0s20f0u1c2: leased 192.168.1.19 for 10800 seconds
enp0s20f0u1c2: adding route to 192.168.1.0/24
enp0s20f0u1c2: adding default route via 192.168.1.1
forked to background, child pid 425851

btw I use NetworkManager for wireless, don't know if it can occur any conflict. Even when everything looking fine with dhcpcd I get no connection at all.

Offline

#9 2022-11-05 21:55:31

seth
Member
Registered: 2012-09-03
Posts: 64,523

Re: [SOLVED] usb ethernet adapter detected but no connection

don't know if it can occur any conflict

Yes.
But also everything you posted says that you've a lease and a route on enp0s20f0u1c2

You've networkmanager, systemd-networkd and dhcpcd (but only on wlp2s0) running.
=> Pick one, stop and disable the others (eg. NM can handle all your connections)

Then explain what makes you believe that the ethernet dongle " has no connection at all" - because that's not correct at all.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#10 2022-11-05 22:06:26

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

Re: [SOLVED] usb ethernet adapter detected but no connection

Well you're correct, after looking better, the problem is, the Network is not unreachable anymore, but when I send a ping, or try to browser, it begins to load forever, if I don't got an IP the ping would just stop and said that could not reach the network, I will do what you said, remove the others, and see what happens.

Offline

#11 2022-11-05 22:46:07

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

Re: [SOLVED] usb ethernet adapter detected but no connection

Unfortunately, I removed all services instead NetworkManager and still with problem, even with an address leased, I tried a ping and all received only packets loss

kaneda@heaven:~$ ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
^C
--- 8.8.8.8 ping statistics ---
13 packets transmitted, 0 received, 100% packet loss, time 12174ms

Last edited by young_kaneda (2022-11-05 22:46:49)

Offline

#12 2022-11-05 23:47:09

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 7,167

Re: [SOLVED] usb ethernet adapter detected but no connection

What did you do to remove the services exactly? You need to both 'stop' and 'disable' them and then restart the NetworkManager service. Can you ping an IP in your LAN e.g. 192.168.1.1?

CLI Paste | How To Ask Questions

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#13 2022-11-06 00:32:31

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

Re: [SOLVED] usb ethernet adapter detected but no connection

cfr wrote:

What did you do to remove the services exactly? You need to both 'stop' and 'disable' them and then restart the NetworkManager service. Can you ping an IP in your LAN e.g. 192.168.1.1?

I’m not on the device right now, but I suppose that yes I can, about the other services, sorry how I expressed myself, but I just done what you had said, stop and disabled. Maybe this could be some problem with DNS?

Offline

#14 2022-11-06 01:05:14

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 7,167

Re: [SOLVED] usb ethernet adapter detected but no connection

You're trying to ping an IP directly, so there's no domain name to resolve. So DNS shouldn't be relevant, I don't think?

CLI Paste | How To Ask Questions

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#15 2022-11-06 01:29:20

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

Re: [SOLVED] usb ethernet adapter detected but no connection

cfr wrote:

You're trying to ping an IP directly, so there's no domain name to resolve. So DNS shouldn't be relevant, I don't think?

About trying to ping google dns, or browsing anything.

Offline

#16 2022-11-06 08:08:46

seth
Member
Registered: 2012-09-03
Posts: 64,523

Re: [SOLVED] usb ethernet adapter detected but no connection

When you're back on the device and preferably after a reboot:

find /etc/systemd -type l -exec test -f {} \; -print | awk -F'/' '{ printf ("%-40s | %s\n", $(NF-0), $(NF-1)) }' | sort -f
ip a
ip r
ping -c1 _gateway
ping -c1 2001:4860:4860::8888 # googles IPv6 DNS server

This is not a DNS issue for the reason cfr pointed out. There's no DNS in "ping 8.8.8.8"

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#17 2022-11-06 12:14:00

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

Re: [SOLVED] usb ethernet adapter detected but no connection

Had to disable wifi since it connects automatically.

kaneda@heaven:~$ sudo nmcli radio wifi off
[sudo] password for kaneda: 
kaneda@heaven:~$ find /etc/systemd -type l -exec test -f {} \; -print | awk -F'/' '{ printf ("%-40s | %s\n", $(NF-0), $(NF-1)) }' | sort -f
bluetooth.service                        | bluetooth.target.wants
dbus-org.bluez.service                   | system
dbus-org.freedesktop.nm-dispatcher.service | system
dbus-org.freedesktop.resolve1.service    | system
dbus-org.freedesktop.timesync1.service   | system
fstrim.timer                             | timers.target.wants
getty@tty1.service                       | getty.target.wants
NetworkManager.service                   | multi-user.target.wants
NetworkManager-wait-online.service       | network-online.target.wants
p11-kit-server.socket                    | sockets.target.wants
pipewire-pulse.socket                    | sockets.target.wants
pipewire-session-manager.service         | user
pipewire.socket                          | sockets.target.wants
remote-fs.target                         | multi-user.target.wants
systemd-resolved.service                 | sysinit.target.wants
systemd-timesyncd.service                | sysinit.target.wants
wireplumber.service                      | pipewire.service.wants
kaneda@heaven:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp0s20f0u1c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
    link/ether 00:e0:81:32:36:ed brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.19/24 brd 192.168.1.255 scope global dynamic noprefixroute enp0s20f0u1c2
       valid_lft 10755sec preferred_lft 10755sec
    inet6 2804:29b8:508c:3cf2:a967:63fd:c80a:a9b1/64 scope global dynamic noprefixroute 
       valid_lft 259199sec preferred_lft 172799sec
    inet6 fe80::1e45:516d:f4b4:1c60/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
3: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
    link/ether d0:94:66:9f:0e:a8 brd ff:ff:ff:ff:ff:ff
4: wlp2s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 42:ec:79:df:38:59 brd ff:ff:ff:ff:ff:ff permaddr d4:6a:6a:f9:73:71
kaneda@heaven:~$ ip r
default via 192.168.1.1 dev enp0s20f0u1c2 proto dhcp src 192.168.1.19 metric 20100 
192.168.1.0/24 dev enp0s20f0u1c2 proto kernel scope link src 192.168.1.19 metric 100 
kaneda@heaven:~$ ping -c1 _gateway
PING _gateway(_gateway (fe80::ea01:8dff:fe20:4e58%enp0s20f0u1c2)) 56 data bytes
64 bytes from _gateway (fe80::ea01:8dff:fe20:4e58%enp0s20f0u1c2): icmp_seq=1 ttl=64 time=0.507 ms

--- _gateway ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.507/0.507/0.507/0.000 ms
kaneda@heaven:~$ ping -c1 2001:4860:4860::8888
PING 2001:4860:4860::8888(2001:4860:4860::8888) 56 data bytes

--- 2001:4860:4860::8888 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms

Offline

#18 2022-11-06 12:26:05

seth
Member
Registered: 2012-09-03
Posts: 64,523

Re: [SOLVED] usb ethernet adapter detected but no connection

You've carrier, lease and a route and can ping the _gateway (via IPv6)

ping -c1 -4 _gateway
ping -c1 2001:4860:4860::8888%enp0s20f0u1c2

Last edited by seth (2022-11-06 12:26:18)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#19 2022-11-06 21:59:37

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

Re: [SOLVED] usb ethernet adapter detected but no connection

kaneda@heaven:~$ ping -c1 -4 _gateway
PING  (192.168.1.1) 56(84) bytes of data.
^C64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.744 ms

---  ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.744/0.744/0.744/0.000 ms
kaneda@heaven:~$ ping -c1 2001:4860:4860::8888%enp0s20f0u1c2
ping: 2001:4860:4860::8888%enp0s20f0u1c2: Name or service not known

Here the logs for what you asked

Offline

#20 2022-11-07 07:29:26

seth
Member
Registered: 2012-09-03
Posts: 64,523

Re: [SOLVED] usb ethernet adapter detected but no connection

https://wiki.archlinux.org/title/IPv6#Disable_IPv6 - "ipv6.disable=1"

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#21 2022-11-07 19:02:28

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

Re: [SOLVED] usb ethernet adapter detected but no connection

seth wrote:

Ok now I have no inet6 entry

6: enp0s20f0u2c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 00:e0:81:32:36:ed brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.19/24 brd 192.168.1.255 scope global dynamic noprefixroute enp0s20f0u2c2
       valid_lft 10316sec preferred_lft 10316se

but yet could not browse any page, or ping any host.

kaneda@heaven:~$ ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
^C
--- 8.8.8.8 ping statistics ---
7 packets transmitted, 0 received, 100% packet loss, time 6088ms

Offline

#22 2022-11-07 20:15:47

seth
Member
Registered: 2012-09-03
Posts: 64,523

Re: [SOLVED] usb ethernet adapter detected but no connection

ping -c1 _gateway

still works?
The traffic apparently gets dropped in the router or a firewall in the LAN.

Sanity check: does *any* device behind that router have internet connection?
Does the router have internet connection?
Log into the router and try to ping 8.8.8.8 from there…

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#23 2022-11-07 21:23:59

young_kaneda
Member
Registered: 2022-10-04
Posts: 25

Re: [SOLVED] usb ethernet adapter detected but no connection

seth wrote:
ping -c1 _gateway

still works?
The traffic apparently gets dropped in the router or a firewall in the LAN.

Sanity check: does *any* device behind that router have internet connection?
Does the router have internet connection?
Log into the router and try to ping 8.8.8.8 from there…

Yep, I can still ping the gateway.

Sanity check: Yes all of them work, but they are all wireless connections, maybe is something with wired connections on the router? I will try to log into thw router and see.

Edit: For some reason it just started to work after a reboot, tbh I changed the router port that I connected the cable, and now, it just works, I will mark this as solved, THX A LOT for the patience seth, you are a hero.

Last edited by young_kaneda (2022-11-07 21:31:06)

Offline

#24 2022-11-07 22:39:47

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,402

Re: [SOLVED] usb ethernet adapter detected but no connection

young_kaneda, You can mark a thread solved by going to your first post and editing it.  When you edit the first post in the thread, you have the option to edit the title.  Simply do that and prepend [SOLVED]

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Offline

Pages: 1

Board footer

Powered by FluxBB