You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2022-11-13 14:38:22
- pal_bjartan
- Member
- Registered: 2022-11-13
- Posts: 9
Unable to Connect to TV via HDMI
I recently made the switch from Ubuntu 22.04 to Arch Linux. I had prior to this, while still on Ubuntu, the living room TV connected to my laptop. After installing Arch Linux, I am no longer able to get a picture on the TV. I can see a secondary display appears in the display settings, however, when trying to connect to it nothing really happens.
TV show up as secondary display `XXX 55"`
I open the settings for secondary display and try enter some sensible values for resolution and refresh rate.
One clicked `Apply` the settings revert and monitor is still turned off. No image is displayed on the TV.
Typing xrandr in terminal returns:
% xrandr
Screen 0: minimum 320 x 200, current 5760 x 2160, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 381mm x 214mm
1920x1080 144.00*+ 60.01 59.97 59.96 59.93
1680x1050 144.00 59.95 59.88
1400x1050 74.76 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 144.00 85.02 75.02 60.02
1440x900 144.00
1400x900 59.96 59.88
1280x960 85.00 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 144.00 59.99 59.97 59.81 59.91
1152x864 75.00
1280x720 144.00 60.00 59.99 59.86 59.74
1024x768 144.00 85.00 75.05 60.04 85.00 75.03 70.07 60.00
1024x768i 86.96
960x720 85.00 75.00 60.00
928x696 75.00 60.05
896x672 75.05 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
832x624 74.55
960x540 59.96 59.99 59.63 59.82
800x600 144.00 85.00 75.00 70.00 65.00 60.00 85.14 72.19 75.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 74.76 59.98
800x450 59.95 59.82
640x512 85.02 75.02 60.02
700x450 59.96 59.88
640x480 144.00 85.09 60.00 85.01 72.81 75.00 59.94
720x405 59.51 58.99
720x400 85.04
684x384 59.88 59.85
640x400 59.88 59.98 85.08
576x432 75.00
640x360 59.86 59.83 59.84 59.32
640x350 85.08
512x384 85.00 75.03 70.07 60.00
512x384i 87.06
512x288 60.00 59.92
416x312 74.66
480x270 59.63 59.82
400x300 85.27 72.19 75.12 60.32 56.34
432x243 59.92 59.57
320x240 85.18 72.81 75.00 60.05
360x202 59.51 59.13
360x200 85.04
320x200 85.27
320x180 59.84 59.32
320x175 85.27
DP-1-0 disconnected (normal left inverted right x axis y axis)
DP-1-1 disconnected (normal left inverted right x axis y axis)
DP-1-2 disconnected (normal left inverted right x axis y axis)
DP-1-3 disconnected (normal left inverted right x axis y axis)
HDMI-1-0 connected (normal left inverted right x axis y axis)
3840x2160 60.00 + 59.94 50.00 29.97 25.00 23.98
4096x2160 59.94 50.00 24.00 23.98
1920x1080 60.00 59.94 50.00 29.97 25.00 23.98
1600x1200 60.00
1600x900 60.00
1280x1024 60.02
1280x960 60.00
1280x720 60.00 59.94 50.00
1024x768 60.00
800x600 60.32
720x576 50.00
640x480 59.94
DP-1-4 disconnected (normal left inverted right x axis y axis)
1280x1024 (0x55) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1280x960 (0x5a) 108.000MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.00KHz
v: height 960 start 961 end 964 total 1000 clock 60.00Hz
1024x768 (0x71) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
800x600 (0x8e) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
640x480 (0xa3) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHzApparently, it detects that a HDMI is connected, however, it seems it is unable to detect what kind of display is connected.
% ls /sys/class/drm/
card0 card0-eDP-1 card1 renderD128 renderD129 versionApparently, there's also no EDID detected on the HDMI port. I've also tried booting into the LTS kernel, and testing the cable on other devices, but the problem persists. I am at a loss trying to figure out what the issue may be. Some help would be appreciated.
Some additional info:
OS: Arch Linux x86_64
Host: 82JY Legion 5 17ACH6H
Kernel: 6.0.8-arch1-1
Shell: zsh 5.9
Resolution: 1920x1080
DE: GNOME 43.1
CPU: AMD Ryzen 7 5800H with Radeon Graphics (16) @ 3.200GHz
GPU: NVIDIA GeForce RTX 3070 Mobile / Max-Q
GPU: AMD ATI Radeon Vega Series / Radeon Vega Mobile Series Selected output from journalctl
nov. 13 18:50:40 hostname /usr/lib/gdm-x-session[738]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
nov. 13 18:50:40 hostname /usr/lib/gdm-x-session[738]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
nov. 13 18:50:40 hostname /usr/lib/gdm-x-session[738]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
nov. 13 18:50:40 hostname /usr/lib/gdm-x-session[738]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
nov. 13 18:50:40 hostname /usr/lib/gdm-x-session[738]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event16)
nov. 13 18:50:40 hostname /usr/lib/gdm-x-session[738]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event17)
nov. 13 18:50:41 hostname /usr/lib/gdm-x-session[738]: (EE) NVIDIA(G0): Failed to configure Reverse PRIME on output HDMI-1-0.
nov. 13 18:50:54 hostname /usr/lib/gdm-x-session[1213]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
nov. 13 18:50:54 hostname /usr/lib/gdm-x-session[1213]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
nov. 13 18:50:54 hostname /usr/lib/gdm-x-session[1213]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
nov. 13 18:50:54 hostname /usr/lib/gdm-x-session[1213]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
nov. 13 18:50:54 hostname /usr/lib/gdm-x-session[1213]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event16)
nov. 13 18:50:54 hostname /usr/lib/gdm-x-session[1213]: (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event17)
nov. 13 18:50:55 hostname /usr/lib/gdm-x-session[1213]: (EE) NVIDIA(G0): Failed to configure Reverse PRIME on output HDMI-1-0.
nov. 13 18:52:39 hostname /usr/lib/gdm-x-session[1213]: (EE) NVIDIA(G0): Failed to configure Reverse PRIME on output HDMI-1-0.
# ... (message repeated)
nov. 13 21:57:23 hostname /usr/lib/gdm-x-session[1213]: (EE) NVIDIA(G0): Failed to configure Reverse PRIME on output HDMI-1-0.lspci output:
% lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne IOMMU
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge
00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 51)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 7
01:00.0 VGA compatible controller: NVIDIA Corporation GA104M [GeForce RTX 3070 Mobile / Max-Q] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GA104 High Definition Audio Controller (rev a1)
02:00.0 Non-Volatile memory controller: SK hynix Gold P31/PC711 NVMe Solid State Drive
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
04:00.0 Network controller: MEDIATEK Corp. MT7921 802.11ax PCI Express Wireless Network Adapter
05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] (rev c5)
05:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor
05:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
05:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
05:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD] ACP/ACP3X/ACP6x Audio Coprocessor (rev 01)
05:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD Audio Controller
06:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81)Last edited by pal_bjartan (2022-11-13 17:30:11)
Offline
Pages: 1