You are not logged in.
Hi,
So I have a Sennheiser Momentum 3 headset which works ok on a Windows box, but I can't make it connect with Arch Linux.
Kernel: 6.1.12-zen1-1-zen
Bluetooth adapter: Z790 onboard Intel® Killer™ Wi-Fi 6E AX1690
What happens: it connects & immediately disconnects.
How do I make it connect?
Thank you.
P. S. Various random actions like rebooting, powering the headset on/off, and restarting services were made. No luck.
Configs & outputs.
/etc/bluetooth/main.conf:
[General]
ControllerMode = dual
Experimental = true
KernelExperimental = true
[BR]
[LE]
[GATT]
[AVDTP]
[Policy]
AutoEnable=true
[AdvMon]Connection / pairing attempt:
[20:41:00] (000) naquad@new-nq ~ ❯❯❯ bluetoothctl
Agent registered
[CHG] Controller 88:D8:2E:96:43:39 Pairable: yes
AdvertisementMonitor path registered
[bluetooth]# devices
[bluetooth]# scan on
Discovery started
[CHG] Controller 88:D8:2E:96:43:39 Discovering: yes
[NEW] Device 00:1B:66:0D:A0:CF MOMENTUM 3
[bluetooth]# trust 00:1B:66:0D:A0:CF
[CHG] Device 00:1B:66:0D:A0:CF Trusted: yes
Changing 00:1B:66:0D:A0:CF trust succeeded
[bluetooth]# connect 00:1B:66:0D:A0:CF
Attempting to connect to 00:1B:66:0D:A0:CF
[CHG] Device 00:1B:66:0D:A0:CF Connected: yes
[CHG] Device 00:1B:66:0D:A0:CF Connected: no
[bluetooth]# pair 00:1B:66:0D:A0:CF
Attempting to pair with 00:1B:66:0D:A0:CF
[CHG] Device 00:1B:66:0D:A0:CF Connected: yes
Failed to pair: org.bluez.Error.ConnectionAttemptFailed
[CHG] Device 00:1B:66:0D:A0:CF Connected: no
[NEW] Device 41:B8:19:24:EF:D9 41-B8-19-24-EF-D9
[bluetooth]# devices
Device 00:1B:66:0D:A0:CF MOMENTUM 3dmesg related output:
[ 6.715424] Bluetooth: Core ver 2.22
[ 6.715434] Bluetooth: HCI device and connection manager initialized
[ 6.715436] Bluetooth: HCI socket layer initialized
[ 6.715437] Bluetooth: L2CAP socket layer initialized
[ 6.715438] Bluetooth: SCO socket layer initialized
[ 6.729223] Bluetooth: hci0: Device revision is 0
[ 6.729225] Bluetooth: hci0: Secure boot is enabled
[ 6.729226] Bluetooth: hci0: OTP lock is enabled
[ 6.729227] Bluetooth: hci0: API lock is enabled
[ 6.729227] Bluetooth: hci0: Debug lock is disabled
[ 6.729227] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 6.729228] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38
[ 6.759816] Bluetooth: hci0: Found device firmware: intel/ibt-1040-0041.sfi
[ 6.759834] Bluetooth: hci0: Boot Address: 0x100800
[ 6.759835] Bluetooth: hci0: Firmware Version: 107-51.22
[ 7.626385] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.626386] Bluetooth: BNEP filters: protocol multicast
[ 7.626388] Bluetooth: BNEP socket layer initialized
[ 8.126627] Bluetooth: hci0: Waiting for firmware download to complete
[ 8.128229] Bluetooth: hci0: Firmware loaded in 1336356 usecs
[ 8.128343] Bluetooth: hci0: Waiting for device to boot
[ 8.144198] Bluetooth: hci0: Device booted in 15565 usecs
[ 8.144198] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[ 8.144964] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-1040-0041.ddc
[ 8.146252] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 8.149242] Bluetooth: hci0: Firmware timestamp 2022.51 buildtype 1 build 56683
[ 8.217277] Bluetooth: MGMT ver 1.22
[ 8.241780] Bluetooth: hci0: offload codecs enable 1 changed 1
[ 8.241789] Bluetooth: ISO socket layer initialized
[ 25.374577] Bluetooth: RFCOMM TTY layer initialized
[ 25.374582] Bluetooth: RFCOMM socket layer initialized
[ 25.374583] Bluetooth: RFCOMM ver 1.11
[ 660.843805] Bluetooth: hci0: Opcode 0x2043 failed: -110
[ 660.843816] Bluetooth: hci0: request failed to create LE connection: err -110
[ 665.259689] Bluetooth: hci0: Opcode 0x2043 failed: -110
[ 665.259707] Bluetooth: hci0: request failed to create LE connection: err -110
[ 669.675521] Bluetooth: hci0: Opcode 0x2043 failed: -110
[ 669.675532] Bluetooth: hci0: request failed to create LE connection: err -110
[ 669.779291] Bluetooth: hci0: Opcode 0x202d failed: -16
[ 669.779301] Bluetooth: hci0: Unable to disable LL privacy: -16
[ 681.323086] Bluetooth: hci0: Opcode 0x2043 failed: -110
[ 681.323089] Bluetooth: hci0: request failed to create LE connection: err -110
[ 1753.236283] Bluetooth: hci0: Ignoring error of Inquiry Cancel command
[ 1801.812251] Bluetooth: hci0: Ignoring error of Inquiry Cancel commandbtmon output
Bluetooth monitor ver 5.66
= Note: Linux version 6.1.12-zen1-1-zen (x86_64) 0.496264
= Note: Bluetooth subsystem version 2.22 0.496268
= New Index: 88:D8:2E:96:43:39 (Primary,USB,hci0) [hci0] 0.496270
= Open Index: 88:D8:2E:96:43:39 [hci0] 0.496270
= Index Info: 88:D8:2E:96:43:39 (Intel Corp.) [hci0] 0.496271
@ MGMT Open: bluetoothd (privileged) version 1.22 {0x0001} 0.496272
< HCI Command: LE Set Address Resolu.. (0x08|0x002d) plen 1 #1 [hci0] 9.398048
Address resolution: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 9.496841
LE Set Address Resolution Enable (0x08|0x002d) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Address Resolu.. (0x08|0x002d) plen 1 #3 [hci0] 9.496980
Address resolution: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 9.498843
LE Set Address Resolution Enable (0x08|0x002d) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Scan... (0x08|0x0041) plen 8 #5 [hci0] 9.498929
Own address type: Public (0x00)
Filter policy: Ignore not in accept list (0x01)
PHYs: 0x01
Entry 0: LE 1M
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 60.000 msec (0x0060)
> HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 9.500843
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Scan... (0x08|0x0042) plen 6 #7 [hci0] 9.500971
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4 #8 [hci0] 9.502843
LE Set Extended Scan Enable (0x08|0x0042) ncmd 2
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 37 #9 [hci0] 9.805876
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x0013
Props: 0x0013
Connectable
Scannable
Use legacy advertising PDUs
Data status: [0;32mComplete[0m
Legacy PDU Type: ADV_IND (0x0013)
Address type: Public (0x00)
Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Primary PHY: LE 1M
Secondary PHY: No packets
SID: no ADI field (0xff)
TX power: 127 dBm
RSSI: -96 dBm (0xa0)
Periodic advertising interval: 0.00 msec (0x0000)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
Data length: 0x0b
02 01 1a 07 03 ec fe 03 fe ce fd ...........
Flags: 0x1a
LE General Discoverable Mode
Simultaneous LE and BR/EDR (Controller)
Simultaneous LE and BR/EDR (Host)
16-bit Service UUIDs (complete): 3 entries
Tile, Inc. (0xfeec)
Amazon.com Services, Inc. (0xfe03)
SENNHEISER electronic GmbH & Co. KG (0xfdce)
< HCI Command: LE Set Extended Scan.. (0x08|0x0042) plen 6 #10 [hci0] 9.805951
Extended scan: Disabled (0x00)
Filter duplicates: Disabled (0x00)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4 #11 [hci0] 9.810851
LE Set Extended Scan Enable (0x08|0x0042) ncmd 2
Status: Success (0x00)
< HCI Command: LE Extended Create... (0x08|0x0043) plen 26 #12 [hci0] 9.810914
Filter policy: Accept list is not used (0x00)
Own address type: Public (0x00)
Peer address type: Public (0x00)
Peer address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Initiating PHYs: 0x01
Entry 0: LE 1M
Scan interval: 60.000 msec (0x0060)
Scan window: 60.000 msec (0x0060)
Min connection interval: 30.00 msec (0x0018)
Max connection interval: 50.00 msec (0x0028)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)
> HCI Event: Command Status (0x0f) plen 4 #13 [hci0] 9.812858
LE Extended Create Connection (0x08|0x0043) ncmd 2
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 31 #14 [hci0] 10.361909
LE Enhanced Connection Complete (0x0a)
Status: Success (0x00)
Handle: 3585
Role: Central (0x00)
Peer address type: Public (0x00)
Peer address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Local resolvable private address: 00:00:00:00:00:00 (Non-Resolvable)
Peer resolvable private address: 00:00:00:00:00:00 (Non-Resolvable)
Connection interval: 45.00 msec (0x0024)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Central clock accuracy: 0x00
@ MGMT Event: Device Connected (0x000b) plen 24 {0x0001} [hci0] 10.361951
LE Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Flags: 0x00000008
Connection Locally Initiated
Data length: 11
Flags: 0x1a
LE General Discoverable Mode
Simultaneous LE and BR/EDR (Controller)
Simultaneous LE and BR/EDR (Host)
16-bit Service UUIDs (complete): 3 entries
Tile, Inc. (0xfeec)
Amazon.com Services, Inc. (0xfe03)
SENNHEISER electronic GmbH & Co. KG (0xfdce)
< HCI Command: LE Read Remote Used.. (0x08|0x0016) plen 2 #15 [hci0] 10.362035
Handle: 3585 Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
@ RAW Open: btmon (privileged) version 2.22 {0x0002} 10.362280
@ RAW Close: btmon {0x0002} 10.362288
> HCI Event: LE Meta Event (0x3e) plen 4 #16 [hci0] 10.362869
LE Channel Selection Algorithm (0x14)
Handle: 3585 Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Algorithm: #2 (0x01)
> HCI Event: Command Status (0x0f) plen 4 #17 [hci0] 10.363874
LE Read Remote Used Features (0x08|0x0016) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 12 #18 [hci0] 10.605890
LE Read Remote Used Features (0x04)
Status: Connection Failed to be Established (0x3e)
Handle: 3585 Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> HCI Event: Disconnect Complete (0x05) plen 4 #19 [hci0] 10.606878
Status: Success (0x00)
Handle: 3585 Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Reason: Connection Failed to be Established (0x3e)
@ MGMT Event: Device Disconnected (0x000c) plen 8 {0x0001} [hci0] 10.612865
LE Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Reason: Unspecified (0x00)
@ MGMT Command: Pair Device (0x0019) plen 8 {0x0001} [hci0] 12.891915
LE Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Capability: KeyboardDisplay (0x04)
< HCI Command: LE Set Address Reso.. (0x08|0x002d) plen 1 #20 [hci0] 12.892049
Address resolution: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #21 [hci0] 12.893965
LE Set Address Resolution Enable (0x08|0x002d) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Address Reso.. (0x08|0x002d) plen 1 #22 [hci0] 12.894100
Address resolution: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #23 [hci0] 12.895960
LE Set Address Resolution Enable (0x08|0x002d) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 #24 [hci0] 12.896039
Own address type: Public (0x00)
Filter policy: Ignore not in accept list (0x01)
PHYs: 0x01
Entry 0: LE 1M
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 60.000 msec (0x0060)
> HCI Event: Command Complete (0x0e) plen 4 #25 [hci0] 12.897956
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 #26 [hci0] 12.898030
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4 #27 [hci0] 12.899963
LE Set Extended Scan Enable (0x08|0x0042) ncmd 2
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 37 #28 [hci0] 13.115994
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x0013
Props: 0x0013
Connectable
Scannable
Use legacy advertising PDUs
Data status: [0;32mComplete[0m
Legacy PDU Type: ADV_IND (0x0013)
Address type: Public (0x00)
Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Primary PHY: LE 1M
Secondary PHY: No packets
SID: no ADI field (0xff)
TX power: 127 dBm
RSSI: -89 dBm (0xa7)
Periodic advertising interval: 0.00 msec (0x0000)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
Data length: 0x0b
02 01 1a 07 03 ec fe 03 fe ce fd ...........
Flags: 0x1a
LE General Discoverable Mode
Simultaneous LE and BR/EDR (Controller)
Simultaneous LE and BR/EDR (Host)
16-bit Service UUIDs (complete): 3 entries
Tile, Inc. (0xfeec)
Amazon.com Services, Inc. (0xfe03)
SENNHEISER electronic GmbH & Co. KG (0xfdce)
< HCI Command: LE Set Extended Sca.. (0x08|0x0042) plen 6 #29 [hci0] 13.116040
Extended scan: Disabled (0x00)
Filter duplicates: Disabled (0x00)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4 #30 [hci0] 13.116960
LE Set Extended Scan Enable (0x08|0x0042) ncmd 2
Status: Success (0x00)
< HCI Command: LE Extended Create.. (0x08|0x0043) plen 26 #31 [hci0] 13.117011
Filter policy: Accept list is not used (0x00)
Own address type: Public (0x00)
Peer address type: Public (0x00)
Peer address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Initiating PHYs: 0x01
Entry 0: LE 1M
Scan interval: 60.000 msec (0x0060)
Scan window: 60.000 msec (0x0060)
Min connection interval: 30.00 msec (0x0018)
Max connection interval: 50.00 msec (0x0028)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)
> HCI Event: Command Status (0x0f) plen 4 #32 [hci0] 13.118965
LE Extended Create Connection (0x08|0x0043) ncmd 2
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 31 #33 [hci0] 13.672058
LE Enhanced Connection Complete (0x0a)
Status: Success (0x00)
Handle: 3585
Role: Central (0x00)
Peer address type: Public (0x00)
Peer address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Local resolvable private address: 00:00:00:00:00:00 (Non-Resolvable)
Peer resolvable private address: 00:00:00:00:00:00 (Non-Resolvable)
Connection interval: 45.00 msec (0x0024)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Central clock accuracy: 0x00
@ MGMT Event: Device Connected (0x000b) plen 24 {0x0001} [hci0] 13.672079
LE Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Flags: 0x00000008
Connection Locally Initiated
Data length: 11
Flags: 0x1a
LE General Discoverable Mode
Simultaneous LE and BR/EDR (Controller)
Simultaneous LE and BR/EDR (Host)
16-bit Service UUIDs (complete): 3 entries
Tile, Inc. (0xfeec)
Amazon.com Services, Inc. (0xfe03)
SENNHEISER electronic GmbH & Co. KG (0xfdce)
< HCI Command: LE Read Remote Used.. (0x08|0x0016) plen 2 #34 [hci0] 13.672139
Handle: 3585 Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
@ RAW Open: btmon (privileged) version 2.22 {0x0002} 13.672376
@ RAW Close: btmon {0x0002} 13.672381
> HCI Event: LE Meta Event (0x3e) plen 4 #35 [hci0] 13.673019
LE Channel Selection Algorithm (0x14)
Handle: 3585 Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Algorithm: #2 (0x01)
> HCI Event: Command Status (0x0f) plen 4 #36 [hci0] 13.673991
LE Read Remote Used Features (0x08|0x0016) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 12 #37 [hci0] 13.936015
LE Read Remote Used Features (0x04)
Status: Connection Failed to be Established (0x3e)
Handle: 3585 Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
@ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci0] 13.936120
Pair Device (0x0019) plen 7
Status: Connect Failed (0x04)
LE Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
> HCI Event: Disconnect Complete (0x05) plen 4 #38 [hci0] 13.936997
Status: Success (0x00)
Handle: 3585 Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Reason: Connection Failed to be Established (0x3e)
@ MGMT Event: Device Disconnected (0x000c) plen 8 {0x0001} [hci0] 13.937094
LE Address: 00:1B:66:0D:A0:CF (Sennheiser electronic GmbH & Co. KG)
Reason: Unspecified (0x00)Last edited by naquad (2023-02-18 18:51:11)
Offline