You are not logged in.

#1 2023-03-17 20:28:32

VoidableMethod
Member
Registered: 2023-01-20
Posts: 3

No display on HP Omen 27C

Hello!
I recently decided to switch from Windows to Linux - however, when I boot into the Arch ISO, there was some output (ends on: "triggering uevents..." or similar), my display goes blank, and there's no output. This error didn't happen on another display from MSI, though.
Does anyone know how to fix that? Thanks!

Offline

#2 2023-03-18 11:29:36

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,725

Re: No display on HP Omen 27C

What general system speccs? If nvidia card card try booting with nomodeset on the kernel parameters (press e when selecting the ISO entry)

Online

#3 2023-03-18 16:08:18

VoidableMethod
Member
Registered: 2023-01-20
Posts: 3

Re: No display on HP Omen 27C

Where do I put the nomodeset? In the second or third line?
Also, here are my specs:
Intel Core i5-12600K
16 GB RAM
RTX 3070
1 TB Disk NVME2

Offline

#4 2023-03-18 16:44:16

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,725

Re: No display on HP Omen 27C

Generally at the end/last line, it should just be a single logical line even if it's potentially split up due to resolution/screen size

Online

#5 2023-03-30 10:54:55

AzmuthForger
Member
Registered: 2023-01-09
Posts: 13

Re: No display on HP Omen 27C

It might be due to graphics driver not present in linux kernal . Try booting using integrated graphics and then install the drive for RTX 3070.

Last edited by AzmuthForger (2023-03-30 10:56:44)

Offline

Board footer

Powered by FluxBB