You are not logged in.

#1 2023-03-28 17:21:40

migillope
Member
Registered: 2018-10-22
Posts: 14

[SOLVED] uname and pacman versions disagree

For the past couple of times I have updated my system, I have been unable to boot afterward without fixing stuff in chroot. I get a

Failed to mount /boot

error. This time, uname says the version is 6.1.8 and pacman says the version is 6.2.8 (when in chroot, after mounting /boot). When in emergency mode, uname gives version 6.1.9 (the version of root /boot)

Since this happened before, I ensured to mount /boot before updating, even though boot is automatically mounted when I start (well, when versions match, anyway).

I tried following this post, which seems to have similar issues (though it appears OP didn't have boot mounted in fstab). I didnt want to necropost so I am posting here. https://bbs.archlinux.org/viewtopic.php?id=275628

I want to have boot mounted, so in chroot I mounted /boot and ran the mkinitcpio command. This did not allow me to boot: versions still do not match. How do I fix this?

Thank you

Last edited by migillope (2023-03-29 18:44:47)

Offline

#2 2023-03-28 17:51:25

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,553
Website

Re: [SOLVED] uname and pacman versions disagree

Please post your bootloader/bootmanager configs and your /etc/fstab.  Output of `lsblk` may also be helpful.


"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#3 2023-03-28 21:52:04

migillope
Member
Registered: 2018-10-22
Posts: 14

Re: [SOLVED] uname and pacman versions disagree

Trilby wrote:

Please post your bootloader/bootmanager configs and your /etc/fstab.  Output of `lsblk` may also be helpful.

Sure. All of this is in the chroot environment. I suspected GRUB to be the offender and it does appear that the menuentries reference a UUID which is not the same as the UUID for the boot partition, so I probably need to regenerate those? I have also done this in one of my previous attempts to fix it, but I guess I did not do it correctly.

/etc/fstab

# Static information about the filesystems.
# See fstab(5) for details.

# <file system> <dir> <type> <options> <dump> <pass>
# /dev/nvme0n1p3
UUID=d7afcd7a-c08a-41f8-82a8-eae3f946bff2	/         	ext4      	rw,relatime	0 1

# /dev/nvme0n1p4
UUID=93eae759-e36e-42d9-904e-1562a0076dbe	/home     	ext4      	rw,relatime	0 2

# /dev/nvme0n1p2
UUID=473c674f-8702-4b7b-9c94-96f96b097e41	none      	swap      	defaults  	0 0

# /dev/nvme0n1p1
UUID=6096-1199      	/boot     	vfat      	rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro	0 2

lsblk

NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0         7:0    0 710.1M  1 loop 
sda           8:0    1  28.7G  0 disk 
└─sda1        8:1    1  28.7G  0 part 
nvme0n1     259:0    0 238.5G  0 disk 
├─nvme0n1p1 259:1    0   512M  0 part /boot
├─nvme0n1p2 259:2    0   5.6G  0 part 
├─nvme0n1p3 259:3    0  46.6G  0 part /
└─nvme0n1p4 259:4    0 185.8G  0 part /home

/boot/EFI/GRUB/grub.cfg

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root d7afcd7a-c08a-41f8-82a8-eae3f946bff2
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
  set timeout_style=menu
  set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
  set timeout=5
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d7afcd7a-c08a-41f8-82a8-eae3f946bff2' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_gpt
	insmod ext2
	search --no-floppy --fs-uuid --set=root d7afcd7a-c08a-41f8-82a8-eae3f946bff2
	echo	'Loading Linux linux ...'
	linux	/boot/vmlinuz-linux root=UUID=d7afcd7a-c08a-41f8-82a8-eae3f946bff2 rw  loglevel=3 quiet
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initramfs-linux.img
}
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-d7afcd7a-c08a-41f8-82a8-eae3f946bff2' {
	menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-d7afcd7a-c08a-41f8-82a8-eae3f946bff2' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_gpt
		insmod ext2
		search --no-floppy --fs-uuid --set=root d7afcd7a-c08a-41f8-82a8-eae3f946bff2
		echo	'Loading Linux linux ...'
		linux	/boot/vmlinuz-linux root=UUID=d7afcd7a-c08a-41f8-82a8-eae3f946bff2 rw  loglevel=3 quiet
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initramfs-linux.img
	}
	menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-d7afcd7a-c08a-41f8-82a8-eae3f946bff2' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_gpt
		insmod ext2
		search --no-floppy --fs-uuid --set=root d7afcd7a-c08a-41f8-82a8-eae3f946bff2
		echo	'Loading Linux linux ...'
		linux	/boot/vmlinuz-linux root=UUID=d7afcd7a-c08a-41f8-82a8-eae3f946bff2 rw  loglevel=3 quiet
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initramfs-linux-fallback.img
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
if [ "$grub_platform" = "efi" ]; then
	fwsetup --is-supported
	if [ "$?" = 0 ]; then
		menuentry 'UEFI Firmware Settings' $menuentry_id_option 'uefi-firmware' {
			fwsetup
		}
	fi
fi
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/35_fwupd ###
### END /etc/grub.d/35_fwupd ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg
fi
### END /etc/grub.d/41_custom ###

Offline

#4 2023-03-28 23:21:17

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,438

Re: [SOLVED] uname and pacman versions disagree

You need to regenerate (... and the canonical place that grub will look at is going to be /boot/grub/grub.cfg if you did not pass a non-standard --boot-dir option during grub-install) those and rerun the grub-install command with the partitions properly mounted. You likely didn't during initial setup and now GRUB looks for it's config - and hence the kernels - in the /boot directory of your root partition. Which is basically the same as in the linked thread and explained in: https://bbs.archlinux.org/viewtopic.php … 2#p2031402

Offline

#5 2023-03-29 18:44:04

migillope
Member
Registered: 2018-10-22
Posts: 14

Re: [SOLVED] uname and pacman versions disagree

V1del wrote:

You need to regenerate (... and the canonical place that grub will look at is going to be /boot/grub/grub.cfg if you did not pass a non-standard --boot-dir option during grub-install) those and rerun the grub-install command with the partitions properly mounted. You likely didn't during initial setup and now GRUB looks for it's config - and hence the kernels - in the /boot directory of your root partition. Which is basically the same as in the linked thread and explained in: https://bbs.archlinux.org/viewtopic.php … 2#p2031402

Okay, I figured it out. Thanks to your advice I went ahead and ran grub config (again) while RTFM (more closely) and discovered my file structure in /boot was wonky. I had /boot/EFI/grub holding grub.cfg and efi, but everything else in /boot/grub. I'm not sure how I managed this during install, but I deleted /boot/EFI and put everything directly in /boot. Ran the mkinitcpio command and everything now works.

Thank you for the help.

Offline

Board footer

Powered by FluxBB