Arch Linux

alejo-rivera

Member

Registered: 2023-04-23

Posts: 1

Error message in the iwlwifi driver

Hi.

Having some troubles with the iwlwifi driver. This is the reference of my laptop.

This is the dmesg output related to iwlwifi:

enabling device (0000 -> 0002)
api flags index 2 larger than supported by driver
TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
loaded firmware version 72.daa05125.0 QuZ-a0-jf-b0-72.ucode op_mode iwlmvm
Detected Intel(R) Wireless-AC 9560 160MHz, REV=0x351
SecBoot CPU1 Status: 0x540e, CPU2 Status: 0x3
WFPM_LMAC1_PD_NOTIFICATION: 0x0
HPM_SECONDARY_DEVICE_STATE: 0x742
WFPM_MAC_OTP_CFG7_ADDR: 0x0
WFPM_MAC_OTP_CFG7_DATA: 0x0
UMAC PC: 0x80470056
LMAC PC: 0x11a44
WRT: Collecting data: ini trigger 13 fired (delay=0ms).
Loaded firmware version: 72.daa05125.0 QuZ-a0-jf-b0-72.ucode
0x00000000 | ADVANCED_SYSASSERT          
0x00000000 | trm_hw_status0
0x00000000 | trm_hw_status1
0x00000000 | branchlink2
0x00000000 | interruptlink1
0x00000000 | interruptlink2
0x00000000 | data1
0x00000000 | data2
0x00000000 | data3
0x00000000 | beacon time
0x00000000 | tsf low
0x00000000 | tsf hi
0x00000000 | time gp1
0x00000000 | time gp2
0x00000000 | uCode revision type
0x00000000 | uCode version major
0x00000000 | uCode version minor
0x00000000 | hw version
0x00000000 | board version
0x00000000 | hcmd
0x00000000 | isr0
0x00000000 | isr1
0x00000000 | isr2
0x00000000 | isr3
0x00000000 | isr4
0x00000000 | last cmd Id
0x00000000 | wait_event
0x00000000 | l2p_control
0x00000000 | l2p_duration
0x00000000 | l2p_mhvalid
0x00000000 | l2p_addr_match
0x00000000 | lmpm_pmg_sel
0x00000000 | timestamp
0x00000000 | flow_handler
Start IWL Error Log Dump:
Transport status: 0x00000042, valid: 7
0x20000066 | NMI_INTERRUPT_HOST
0x00000000 | umac branchlink1
0x80453BD8 | umac branchlink2
0x80470056 | umac interruptlink1
0x80470056 | umac interruptlink2
0x01000000 | umac data1
0x80470056 | umac data2
0x00000000 | umac data3
0x00000048 | umac major
0xDAA05125 | umac minor
0x000F6080 | frame pointer
0xC0886264 | stack pointer
0x00000000 | last host cmd
0x00000000 | isr status reg
IML/ROM dump:
0x00000003 | IML/ROM error/state
0x0000540E | IML/ROM data1
0x00000080 | IML/ROM WFPM_AUTH_KEY_0
Fseq Registers:
0x60000000 | FSEQ_ERROR_CODE
0x80260000 | FSEQ_TOP_INIT_VERSION
0x00020006 | FSEQ_CNVIO_INIT_VERSION
0x0000A384 | FSEQ_OTP_VERSION
0xBD18B228 | FSEQ_TOP_CONTENT_VERSION
0x4552414E | FSEQ_ALIVE_TOKEN
0x20000302 | FSEQ_CNVI_ID
0x01300202 | FSEQ_CNVR_ID
0x20000302 | CNVI_AUX_MISC_CHIP
0x01300202 | CNVR_AUX_MISC_CHIP
0x0000485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM
0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR
Failed to start RT ucode: -110
WRT: Collecting data: ini trigger 13 fired (delay=0ms).
Failed to run INIT ucode: -110
retry init count 0

Don't know if it's a problem related to the hardware or the software, how can I know it? What's wrong with the driver and my laptop?

Last edited by alejo-rivera (2023-04-23 16:03:42)

ewaller

Administrator

From: Pasadena, CA

Registered: 2009-07-13

Posts: 19,791

Re: Error message in the iwlwifi driver

Welcome to Arch Linux.

I abused my moderator privileged and changed your quote tags to code tags.   I cannot tell from that what is happening, and 'some troubles' is less than specific.

What are the output of ip link  and of find /etc/systemd/system    ?

---

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way