[SOLVED] DisplayLink: video hangs when moving mouse

djenis · 2023-05-04 19:36:57

Hello,

I'm using a Tuxedo Pulse 14 Gen1 laptop connected to an external monitor via the Tuxedo Office Hub over USB-C with DisplayLink, with both screens active.

I know DisplayLink has mediocre performance and therefore took peace with the fact that my YouTube video were hanging whenever I moved the mouse (the sound continues to play and the video restores when I stop moving the mouse).

However, two days ago I did an upgrade of my systems where both the evdi-git and displaylink packages were upgraded. I was suddenly able to play a 4k video while moving my mouse without the video hanging.

Unfortunately, after doing another system upgrade today, the video is hanging again.

Nevertheless, the two days where it worked properly makes me believe the hanging may be due to an error in my configuration instead of DisplayLink being slow.

Packages:
- displaylink 5.7-1
- evdi-git 1.13.1.r0.g85a347a-1

Output of xrandr --listmonitors:

Monitors: 2
 0: +*DVI-I-1-1 3840/697x2160/392+0+0  DVI-I-1-1
 1: +eDP 1920/309x1080/173+3840+1080  eDP

output of xrandr --listproviders:

Providers: number : 3
Provider 0: id: 0x54 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 4 outputs: 2 associated providers: 2 name:AMD Radeon Graphics @ pci:0000:04:00.0
Provider 1: id: 0x72c cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 1 name:modesetting
Provider 2: id: 0x6e3 cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 1 name:modesetting

This is my /etc/X11/xorg.conf.d/20-evdi.conf

Section "OutputClass"
	Identifier "DisplayLink"
	MatchDriver "evdi"
	Driver "modesetting"
	Option "AccelMethod" "none"
EndSection

What would be the next place to look?

Last edited by djenis (2023-05-04 20:49:03)

seth · 2023-05-04 19:52:26

What would be the next place to look?

Pacman log on what got updated when it turned good and then bad again.

Do you use a compositor?
Because of the mouse condition, https://man.archlinux.org/man/extra/xor … .en#Option

Otehrwise please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

djenis · 2023-05-04 20:13:00

My video improved after this upgrade (both happened on the 2nd of May, I can't tell if the upgrade actually caused the improvement):

[2023-05-02T13:16:20+0200] [PACMAN] Running 'pacman -U --config /etc/pacman.conf -- /home/denis/.cache/yay/evdi-compat-git/evdi-compat-git-1.13.1.r0.g85a347a-1-x86_64.pkg.tar.zst /home/denis/.cache/yay/displaylink/displaylink-5.7-1-x86_64.pkg.tar.zst /home/denis/.cache/yay/dotnet-core-6.0-bin/aspnet-runtime-6.0-bin-6.0.16.sdk408-1-x86_64.pkg.tar.zst /home/denis/.cache/yay/aurutils/aurutils-13.3-1-any.pkg.tar.zst'
[2023-05-02T13:16:31+0200] [ALPM] running '71-dkms-remove.hook'...
[2023-05-02T13:16:31+0200] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod evdi/1.12.1 -k 6.2.13-arch1-1
[2023-05-02T13:16:31+0200] [ALPM-SCRIPTLET] ==> depmod 6.2.13-arch1-1
[2023-05-02T13:16:33+0200] [ALPM] transaction started
[2023-05-02T13:16:33+0200] [ALPM] upgraded evdi-compat-git (1.12.1.r0.gc892401-1 -> 1.13.1.r0.g85a347a-1)
[2023-05-02T13:16:33+0200] [ALPM] upgraded displaylink (5.6.1-3 -> 5.7-1)

I did replace evdi-compat-git with evdi-git an hour ago:

[2023-05-04T20:46:42+0200] [ALPM] transaction started
[2023-05-04T20:46:42+0200] [ALPM] removed evdi-compat-git (1.13.1.r0.g85a347a-1)
[2023-05-04T20:46:42+0200] [ALPM] installed evdi-git (1.13.1.r0.g85a347a-1)
[2023-05-04T20:46:42+0200] [ALPM-SCRIPTLET] ldconfig: /usr/lib/libevdi.so.1 is not a symbolic link
[2023-05-04T20:46:42+0200] [ALPM-SCRIPTLET] 
[2023-05-04T20:46:42+0200] [ALPM] transaction completed

This is where something went bad:

[2023-05-04T18:28:45+0200] [PACMAN] Running 'pacman -Syu'
[2023-05-04T18:28:45+0200] [PACMAN] synchronizing package lists
[2023-05-04T18:28:46+0200] [PACMAN] starting full system upgrade
[2023-05-04T18:30:49+0200] [ALPM] running '60-mkinitcpio-remove.hook'...
[2023-05-04T18:30:49+0200] [ALPM] running '70-dkms-upgrade.hook'...
[2023-05-04T18:30:49+0200] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod vboxhost/7.0.8_OSE -k 6.2.13-arch1-1
[2023-05-04T18:30:49+0200] [ALPM] running '71-dkms-remove.hook'...
[2023-05-04T18:30:49+0200] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod evdi/1.13.1 -k 6.2.13-arch1-1
[2023-05-04T18:30:49+0200] [ALPM-SCRIPTLET] ==> depmod 6.2.13-arch1-1
[2023-05-04T18:30:51+0200] [ALPM] transaction started
[2023-05-04T18:30:51+0200] [ALPM] upgraded alsa-card-profiles (1:0.3.70-1 -> 1:0.3.70-2)
[2023-05-04T18:30:51+0200] [ALPM] upgraded linux-api-headers (6.1.9-1 -> 6.3-1)
[2023-05-04T18:30:51+0200] [ALPM] upgraded glibc (2.37-2 -> 2.37-3)
[2023-05-04T18:30:51+0200] [ALPM-SCRIPTLET] Generating locales...
[2023-05-04T18:30:52+0200] [ALPM-SCRIPTLET]   de_DE.UTF-8... done
[2023-05-04T18:30:53+0200] [ALPM-SCRIPTLET]   en_US.UTF-8... done
[2023-05-04T18:30:53+0200] [ALPM-SCRIPTLET] Generation complete.
[2023-05-04T18:30:53+0200] [ALPM-SCRIPTLET] ldconfig: /usr/lib/libevdi.so.1 is not a symbolic link
[2023-05-04T18:30:53+0200] [ALPM-SCRIPTLET] 
[2023-05-04T18:30:53+0200] [ALPM] upgraded libcap-ng (0.8.3-1 -> 0.8.3-2)
[2023-05-04T18:30:54+0200] [ALPM] upgraded gcc-libs (12.2.1-2 -> 13.1.1-1)
[2023-05-04T18:30:54+0200] [ALPM] upgraded util-linux-libs (2.38.1-3 -> 2.38.1-4)
[2023-05-04T18:30:54+0200] [ALPM] upgraded audit (3.1-1 -> 3.1.1-1)
[2023-05-04T18:30:54+0200] [ALPM] upgraded glib2 (2.76.1-1 -> 2.76.2-1)
[2023-05-04T18:30:54+0200] [ALPM] upgraded systemd-libs (253.3-3 -> 253.4-1)
[2023-05-04T18:30:54+0200] [ALPM] upgraded avahi (0.8+22+gfd482a7-3 -> 0.8+22+gfd482a7-4)
[2023-05-04T18:30:54+0200] [ALPM] upgraded brotli (1.0.9-10 -> 1.0.9-12)
[2023-05-04T18:30:54+0200] [ALPM] upgraded binutils (2.40-4 -> 2.40-5)
[2023-05-04T18:30:54+0200] [ALPM] upgraded boost-libs (1.81.0-3 -> 1.81.0-5)
[2023-05-04T18:30:54+0200] [ALPM] upgraded capstone (4.0.2-6 -> 4.0.2-7)
[2023-05-04T18:30:54+0200] [ALPM] upgraded cython (0.29.34-1 -> 0.29.34-3)
[2023-05-04T18:30:54+0200] [ALPM] upgraded dav1d (1.1.0-1 -> 1.2.0-1)
[2023-05-04T18:30:54+0200] [ALPM] upgraded python (3.10.10-1 -> 3.11.3-1)
[2023-05-04T18:30:54+0200] [ALPM] upgraded dbus-python (1.2.18-4 -> 1.2.18-5)
[2023-05-04T18:30:54+0200] [ALPM] upgraded libseccomp (2.5.4-1 -> 2.5.4-2)
[2023-05-04T18:30:54+0200] [ALPM] upgraded libtool (2.4.7+4+g1ec8fa28-2 -> 2.4.7+4+g1ec8fa28-3)
[2023-05-04T18:30:55+0200] [ALPM] upgraded docker (1:23.0.4-1 -> 1:23.0.5-2)
[2023-05-04T18:30:55+0200] [ALPM] upgraded dtc (1.7.0-1 -> 1.7.0-4)
[2023-05-04T18:30:55+0200] [ALPM] upgraded python-pyinotify (0.9.6-11 -> 0.9.6-12)
[2023-05-04T18:30:55+0200] [ALPM] upgraded hwdata (0.369-1 -> 0.370-1)
[2023-05-04T18:30:55+0200] [ALPM] upgraded util-linux (2.38.1-3 -> 2.38.1-4)
[2023-05-04T18:30:55+0200] [ALPM] upgraded systemd (253.3-3 -> 253.4-1)
[2023-05-04T18:30:56+0200] [ALPM] upgraded python-systemd (235-1 -> 235-2)
[2023-05-04T18:30:56+0200] [ALPM] upgraded fail2ban (1.0.2-1 -> 1.0.2-2)
[2023-05-04T18:30:56+0200] [ALPM] upgraded mpfr (4.2.0-3 -> 4.2.0.p4-1)
[2023-05-04T18:30:57+0200] [ALPM] upgraded gcc (12.2.1-2 -> 13.1.1-1)
[2023-05-04T18:30:57+0200] [ALPM] upgraded glib2-docs (2.76.1-1 -> 2.76.2-1)
[2023-05-04T18:30:58+0200] [ALPM] upgraded go (2:1.20.3-1 -> 2:1.20.4-1)
[2023-05-04T18:30:58+0200] [ALPM] upgraded libgirepository (1.76.1-1 -> 1.76.1-2)
[2023-05-04T18:30:58+0200] [ALPM] upgraded gobject-introspection-runtime (1.76.1-1 -> 1.76.1-2)
[2023-05-04T18:30:58+0200] [ALPM] upgraded gpgme (1.20.0-1 -> 1.20.0-2)
[2023-05-04T18:30:58+0200] [ALPM] upgraded libxml2 (2.10.4-2 -> 2.10.4-4)
[2023-05-04T18:30:58+0200] [ALPM] upgraded gstreamer (1.22.1-2 -> 1.22.2-1)
[2023-05-04T18:30:58+0200] [ALPM] upgraded xcb-proto (1.15.2-2 -> 1.15.2-3)
[2023-05-04T18:30:58+0200] [ALPM] upgraded libxi (1.8-3 -> 1.8.1-1)
[2023-05-04T18:30:58+0200] [ALPM] upgraded llvm-libs (15.0.7-2 -> 15.0.7-3)
[2023-05-04T18:30:58+0200] [ALPM] upgraded gst-plugins-base-libs (1.22.1-2 -> 1.22.2-1)
[2023-05-04T18:30:58+0200] [ALPM] upgraded gst-plugins-base (1.22.1-2 -> 1.22.2-1)
[2023-05-04T18:30:58+0200] [ALPM] upgraded vim-runtime (9.0.1420-1 -> 9.0.1420-2)
[2023-05-04T18:30:58+0200] [ALPM] upgraded libproxy (0.4.18-2 -> 0.4.18-3)
[2023-05-04T18:30:58+0200] [ALPM] upgraded tdb (1.4.8-1 -> 1.4.8-2)
[2023-05-04T18:30:58+0200] [ALPM] upgraded gvim (9.0.1420-1 -> 9.0.1420-2)
[2023-05-04T18:30:58+0200] [ALPM] upgraded python-distro (1.8.0-2 -> 1.8.0-3)
[2023-05-04T18:30:58+0200] [ALPM] upgraded pciutils (3.9.0-2 -> 3.10.0-1)
[2023-05-04T18:30:58+0200] [ALPM] upgraded net-snmp (5.9.1-5 -> 5.9.1-6)
[2023-05-04T18:30:58+0200] [ALPM] upgraded python-gobject (3.44.1-1 -> 3.44.1-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded hplip (1:3.23.3-1 -> 1:3.23.3-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded imath (3.1.7-1 -> 3.1.7-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-pillow (9.4.0-2 -> 9.5.0-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded libxslt (1.1.37-2 -> 1.1.37-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-lxml (4.9.2-1 -> 4.9.2-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-deprecation (2.1.0-6 -> 2.1.0-8)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-typing_extensions (4.5.0-1 -> 4.5.0-4)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-packaging (23.0-1 -> 23.0-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-pikepdf (7.2.0-1 -> 7.2.0-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded img2pdf (0.4.4-4 -> 0.4.4-5)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-decorator (5.1.1-2 -> 5.1.1-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-traitlets (5.9.0-1 -> 5.9.0-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-ptyprocess (0.7.0-4 -> 0.7.0-5)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-pexpect (4.8.0-6 -> 4.8.0-7)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-pickleshare (0.7.5-8 -> 0.7.5-9)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-pygments (2.14.0-2 -> 2.15.1-1)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-wcwidth (0.2.5-6 -> 0.2.6-1)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-prompt_toolkit (3.0.38-1 -> 3.0.38-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-parso (1:0.8.3-1 -> 1:0.8.3-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-jedi (0.18.2-1 -> 0.18.2-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-backcall (0.2.0-7 -> 0.2.0-8)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-matplotlib-inline (0.1.6-2 -> 0.1.6-4)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-six (1.16.0-6 -> 1.16.0-8)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-asttokens (2.2.1-1 -> 2.2.1-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-executing (1.2.0-1 -> 1.2.0-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-pure-eval (0.2.2-2 -> 0.2.2-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-stack-data (0.6.2-4 -> 0.6.2-5)
[2023-05-04T18:30:59+0200] [ALPM] upgraded ipython (8.13.0-1 -> 8.13.1-1)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-comm (0.1.3-1 -> 0.1.3-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-tornado (6.2.0-2 -> 6.2.0-4)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-debugpy (1.6.7-1 -> 1.6.7-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-psutil (5.9.4-1 -> 5.9.5-1)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-nest-asyncio (1.5.6-1 -> 1.5.6-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-ipykernel (6.22.0-1 -> 6.22.0-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-pyzmq (25.0.2-1 -> 25.0.2-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-platformdirs (3.5.0-1 -> 3.5.0-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-jupyter-core (5.3.0-1 -> 5.3.0-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-dateutil (2.8.2-4 -> 2.8.2-5)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-entrypoints (0.4-2 -> 0.4-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-jupyter-client (8.2.0-1 -> 8.2.0-2)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-attrs (22.2.0-1 -> 22.2.0-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-pyrsistent (0.19.3-1 -> 0.19.3-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-jsonschema (4.17.3-1 -> 4.17.3-3)
[2023-05-04T18:30:59+0200] [ALPM] upgraded python-fastjsonschema (2.16.3-1 -> 2.16.3-4)
[2023-05-04T18:30:59+0200] [ALPM] upgraded jupyter-nbformat (5.8.0-1 -> 5.8.0-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-testpath (0.6.0-1 -> 0.6.0-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded jupyter-nbclient (0.7.4-1 -> 0.7.4-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-terminado (0.17.1-1 -> 0.17.1-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-prometheus_client (0.16.0-1 -> 0.16.0-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-markupsafe (2.1.2-1 -> 2.1.2-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-jinja (1:3.1.2-2 -> 1:3.1.2-4)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-send2trash (1.8.0-3 -> 1.8.0-4)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-idna (3.4-1 -> 3.4-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-sniffio (1.3.0-2 -> 1.3.0-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-anyio (3.6.2-1 -> 3.6.2-4)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-wheel (0.40.0-1 -> 0.40.0-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-tomlkit (0.11.8-1 -> 0.11.8-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-more-itertools (9.1.1-1 -> 9.1.1-4)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-jaraco.functools (3.6.0-1 -> 3.6.0-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-jaraco.context (4.3.0-1 -> 4.3.0-3)
[2023-05-04T18:31:00+0200] [ALPM] installed python-autocommand (2.2.2-4)
[2023-05-04T18:31:00+0200] [ALPM] installed python-pydantic (1.10.7-4)
[2023-05-04T18:31:00+0200] [ALPM] installed python-inflect (6.0.4-2)
[2023-05-04T18:31:00+0200] [ALPM] installed python-jaraco.text (3.11.1-3)
[2023-05-04T18:31:00+0200] [ALPM] installed python-ordered-set (4.1.0-4)
[2023-05-04T18:31:00+0200] [ALPM] installed python-tomli (2.0.1-3)
[2023-05-04T18:31:00+0200] [ALPM] installed python-trove-classifiers (2023.4.22-1)
[2023-05-04T18:31:00+0200] [ALPM] installed python-validate-pyproject (0.12.2-3)
[2023-05-04T18:31:00+0200] [ALPM] installed python-setuptools (1:67.7.0-1)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-jupyter-packaging (0.12.3-1 -> 0.12.3-4)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-websocket-client (1.5.1-1 -> 1.5.1-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-urllib3 (1.26.13-1 -> 1.26.15-1)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-chardet (5.1.0-1 -> 5.1.0-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-requests (2.28.2-1 -> 2.28.2-4)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-requests-unixsocket (0.3.0-2 -> 0.3.0-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-ply (3.11-10 -> 3.11-12)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-pycparser (2.21-3 -> 2.21-5)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-cffi (1.15.1-1 -> 1.15.1-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-argon2-cffi-bindings (21.2.0-3 -> 21.2.0-4)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-argon2_cffi (21.3.0-2 -> 21.3.0-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-json-logger (2.0.7-1 -> 2.0.7-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-yaml (6.0-1 -> 6.0-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-click (8.1.3-1 -> 8.1.3-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-colorama (0.4.6-1 -> 0.4.6-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-uc-micro-py (1.0.1-3 -> 1.0.1-4)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-mdurl (0.1.2-2 -> 0.1.2-4)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-markdown-it-py (2.2.0-1 -> 2.2.0-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-rich (13.3.3-1 -> 13.3.5-1)
[2023-05-04T18:31:00+0200] [ALPM] installed python-jsonpointer (2.3-2)
[2023-05-04T18:31:00+0200] [ALPM] installed python-arrow (1.2.3-2)
[2023-05-04T18:31:00+0200] [ALPM] installed python-isoduration (20.11.0-3)
[2023-05-04T18:31:00+0200] [ALPM] installed python-rfc3986-validator (0.1.1-2)
[2023-05-04T18:31:00+0200] [ALPM] installed python-rfc3339-validator (0.1.4-4)
[2023-05-04T18:31:00+0200] [ALPM] installed python-fqdn (1.5.1-2)
[2023-05-04T18:31:00+0200] [ALPM] installed python-uri-template (1.2.0-2)
[2023-05-04T18:31:00+0200] [ALPM] installed python-webcolors (1.13-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-jupyter-events (0.6.3-1 -> 0.6.3-4)
[2023-05-04T18:31:00+0200] [ALPM] upgraded jupyter-server (2.5.0-1 -> 2.5.0-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-json5 (0.9.13-1 -> 0.9.13-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-pytz (2022.7.1-1 -> 2023.3-1)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-babel (2.11.0-1 -> 2.12.1-1)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-ruamel.yaml.clib (0.2.7-1 -> 0.2.7-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-ruamel-yaml (0.17.21-1 -> 0.17.21-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-jupyterlab_server (2.22.1-1 -> 2.22.1-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded jupyter-notebook-shim (0.2.3-1 -> 0.2.3-2)
[2023-05-04T18:31:00+0200] [ALPM] installed python-y-py (0.6.0-2)
[2023-05-04T18:31:00+0200] [ALPM] installed python-aiosqlite (0.19.0-2)
[2023-05-04T18:31:00+0200] [ALPM] installed python-ypy-websocket (0.9.0-2)
[2023-05-04T18:31:00+0200] [ALPM] installed python-jupyter-ydoc (1.0.2-2)
[2023-05-04T18:31:00+0200] [ALPM] installed jupyter-server-fileid (0.8.0-2)
[2023-05-04T18:31:00+0200] [ALPM] installed jupyter-server-ydoc (0.8.0-5)
[2023-05-04T18:31:00+0200] [ALPM] upgraded jupyterlab (3.6.3-3 -> 3.6.3-7)
[2023-05-04T18:31:00+0200] [ALPM] upgraded jupyterlab_pygments (0.2.2-1 -> 0.2.2-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-soupsieve (2.4-1 -> 2.4-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-beautifulsoup4 (4.11.2-1 -> 4.11.2-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-webencodings (0.5.1-9 -> 0.5.1-10)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-bleach (6.0.0-1 -> 6.0.0-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-defusedxml (0.7.1-4 -> 0.7.1-5)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-pandocfilters (1.5.0-1 -> 1.5.0-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-mistune (2.0.5-1 -> 2.0.5-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded python-tinycss2 (1.2.1-1 -> 1.2.1-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded jupyter-nbconvert (7.3.1-1 -> 7.3.1-3)
[2023-05-04T18:31:00+0200] [ALPM] upgraded kitty-terminfo (0.28.1-1 -> 0.28.1-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded kitty-shell-integration (0.28.1-1 -> 0.28.1-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded kitty (0.28.1-1 -> 0.28.1-2)
[2023-05-04T18:31:00+0200] [ALPM] upgraded lib32-glibc (2.37-2 -> 2.37-3)
[2023-05-04T18:31:01+0200] [ALPM] upgraded lib32-gcc-libs (12.2.1-2 -> 13.1.1-1)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libaccounts-glib (1.26-1 -> 1.26-2)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libbytesize (2.7-1 -> 2.7-2)
[2023-05-04T18:31:01+0200] [ALPM] upgraded volume_key (0.3.12-7 -> 0.3.12-8)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libblockdev (2.28-1 -> 2.28-2)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libcamera-ipa (0.0.4-4 -> 0.0.5-1)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libcamera (0.0.4-4 -> 0.0.5-1)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libftdi (1.5-4 -> 1.5-5)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libheif (1.15.2-1 -> 1.16.1-1)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libieee1284 (0.2.11-14 -> 0.2.11-15)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libplist (2.2.0-6 -> 2.2.0-7)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libimobiledevice (1.3.0-6 -> 1.3.0-7)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libixion (0.17.0-4 -> 0.17.0-5)
[2023-05-04T18:31:01+0200] [ALPM] upgraded liblouis (3.25.0-1 -> 3.25.0-2)
[2023-05-04T18:31:01+0200] [ALPM] upgraded liborcus (0.17.2-4 -> 0.17.2-5)
[2023-05-04T18:31:01+0200] [ALPM] upgraded libpipewire (1:0.3.70-1 -> 1:0.3.70-2)
[2023-05-04T18:31:02+0200] [ALPM] upgraded libreoffice-still (7.4.6-1 -> 7.4.6-2)
[2023-05-04T18:31:02+0200] [ALPM] upgraded libsmbios (2.4.3-5 -> 2.4.3-6)
[2023-05-04T18:31:02+0200] [ALPM] upgraded lilv (0.24.20-1 -> 0.24.20-2)
[2023-05-04T18:31:03+0200] [ALPM] upgraded linux (6.2.13.arch1-1 -> 6.3.1.arch1-1)
[2023-05-04T18:31:04+0200] [ALPM] upgraded linux-hardened (6.1.27.hardened1-1 -> 6.1.27.hardened1-2)
[2023-05-04T18:31:04+0200] [ALPM] upgraded pahole (1:1.24+r29+g02d67c5-1 -> 1:1.25-4)
[2023-05-04T18:31:06+0200] [ALPM] upgraded linux-headers (6.2.13.arch1-1 -> 6.3.1.arch1-1)
[2023-05-04T18:31:06+0200] [ALPM] upgraded lttng-ust (2.13.5-1 -> 2.13.5-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded nm-connection-editor (1.32.0-1 -> 1.32.0-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded pipewire (1:0.3.70-1 -> 1:0.3.70-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded pipewire-audio (1:0.3.70-1 -> 1:0.3.70-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded pipewire-alsa (1:0.3.70-1 -> 1:0.3.70-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded pipewire-jack (1:0.3.70-1 -> 1:0.3.70-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded pipewire-pulse (1:0.3.70-1 -> 1:0.3.70-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded postgresql-libs (15.2-1 -> 15.2-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded postgresql (15.2-1 -> 15.2-2)
[2023-05-04T18:31:06+0200] [ALPM-SCRIPTLET] "/var/lib/postgres/data" is missing or empty. Use a command like
[2023-05-04T18:31:06+0200] [ALPM-SCRIPTLET]   su - postgres -c "initdb --locale en_US.UTF-8 -D '/var/lib/postgres/data'"
[2023-05-04T18:31:06+0200] [ALPM-SCRIPTLET] with relevant options, to initialize the database cluster.
[2023-05-04T18:31:06+0200] [ALPM] upgraded protobuf (21.12-1 -> 21.12-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-adblock (0.6.0-1 -> 0.6.0-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-anytree (2.8.0-5 -> 2.8.0-6)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-appdirs (1.4.4-7 -> 1.4.4-8)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-async_generator (1.10-7 -> 1.10-8)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-cairo (1.23.0-3 -> 1.23.0-4)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-charset-normalizer (3.1.0-1 -> 3.1.0-3)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-docutils (1:0.19-3 -> 1:0.19-6)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-future (0.18.2-7 -> 0.18.2-8)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-commonmark (0.9.1-8 -> 0.9.1-9)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-cryptography (40.0.1-1 -> 40.0.2-1)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-dbus-next (0.2.3-3 -> 0.2.3-4)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-distlib (0.3.6-1 -> 0.3.6-3)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-distutils-extra (2.39-10 -> 2.39-11)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-dotenv (1.0.0-1 -> 1.0.0-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-filelock (3.12.0-1 -> 3.12.0-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-html5lib (1.1-11 -> 1.1-12)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-humanfriendly (10.0-4 -> 10.0-5)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-zipp (3.15.0-1 -> 3.15.0-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-importlib-metadata (5.0.0-3 -> 5.0.0-5)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-importlib_resources (5.12.0-1 -> 5.12.0-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-iwlib (1.7.0-4 -> 1.7.0-5)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-kaptan (0.5.12-7 -> 0.5.12-8)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-libtmux (0.21.1-1 -> 0.21.1-2)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-nspektr (0.4.0-2 -> 0.4.0-3)
[2023-05-04T18:31:06+0200] [ALPM] upgraded python-pdfminer (20221105-1 -> 20221105-2)
[2023-05-04T18:31:07+0200] [ALPM] upgraded python-pip (23.0.1-1 -> 23.1.2-1)
[2023-05-04T18:31:07+0200] [ALPM] upgraded python-pluggy (1.0.0-2 -> 1.0.0-4)
[2023-05-04T18:31:07+0200] [ALPM] upgraded python-pycups (2.0.1-5 -> 2.0.1-6)
[2023-05-04T18:31:07+0200] [ALPM] upgraded python-pycurl (7.45.2-1 -> 7.45.2-3)
[2023-05-04T18:31:07+0200] [ALPM] upgraded python-pyopenssl (23.1.1-1 -> 23.1.1-2)
[2023-05-04T18:31:07+0200] [ALPM] upgraded python-pyparsing (3.0.9-1 -> 3.0.9-3)
[2023-05-04T18:31:07+0200] [ALPM] upgraded python-pyxdg (0.28-1 -> 0.28-2)
[2023-05-04T18:31:07+0200] [ALPM] upgraded python-reportlab (3.6.12-2 -> 3.6.12-3)
[2023-05-04T18:31:07+0200] [ALPM] upgraded python-setproctitle (1.3.2-1 -> 1.3.2-2)
[2023-05-04T18:31:07+0200] [ALPM] upgraded python-tqdm (4.65.0-1 -> 4.65.0-3)
[2023-05-04T18:31:07+0200] [ALPM] upgraded python-virtualenv (20.17.1-1 -> 20.21.0-1)
[2023-05-04T18:31:07+0200] [ALPM] upgraded qca-qt5 (2.3.6-1 -> 2.3.6-2)
[2023-05-04T18:31:07+0200] [ALPM] upgraded ranger (1.9.3-8 -> 1.9.3-9)
[2023-05-04T18:31:07+0200] [ALPM] upgraded reflector (2021.11-6 -> 2021.11-7)
[2023-05-04T18:31:07+0200] [ALPM] upgraded system-config-printer (1.5.18-1 -> 1.5.18-2)
[2023-05-04T18:31:07+0200] [ALPM] upgraded systemd-sysvcompat (253.3-3 -> 253.4-1)
[2023-05-04T18:31:07+0200] [ALPM] upgraded tmuxp (1.27.1-3 -> 1.27.1-4)
[2023-05-04T18:31:07+0200] [ALPM] upgraded ttf-sourcecodepro-nerd (3.0.0-1 -> 3.0.0-2)
[2023-05-04T18:31:07+0200] [ALPM] upgraded virtualbox-host-dkms (7.0.8-1 -> 7.0.8-2)
[2023-05-04T18:31:07+0200] [ALPM] upgraded virtualbox (7.0.8-1 -> 7.0.8-2)
[2023-05-04T18:31:07+0200] [ALPM] upgraded xapp (2.4.3-1 -> 2.4.3-2)
[2023-05-04T18:31:08+0200] [ALPM] upgraded youtube-dl (2021.12.17-1 -> 2021.12.17-2)
[2023-05-04T18:31:08+0200] [ALPM-SCRIPTLET] ldconfig: /usr/lib/libevdi.so.1 is not a symbolic link
[2023-05-04T18:31:08+0200] [ALPM-SCRIPTLET] 
[2023-05-04T18:31:08+0200] [ALPM] transaction completed
[2023-05-04T18:31:10+0200] [ALPM] running '20-systemd-sysusers.hook'...
[2023-05-04T18:31:10+0200] [ALPM] running '30-systemd-catalog.hook'...
[2023-05-04T18:31:10+0200] [ALPM] running '30-systemd-daemon-reload.hook'...
[2023-05-04T18:31:10+0200] [ALPM] running '30-systemd-hwdb.hook'...
[2023-05-04T18:31:10+0200] [ALPM] running '30-systemd-sysctl.hook'...
[2023-05-04T18:31:10+0200] [ALPM] running '30-systemd-tmpfiles.hook'...
[2023-05-04T18:31:11+0200] [ALPM] running '30-systemd-udev-reload.hook'...
[2023-05-04T18:31:14+0200] [ALPM] running '30-systemd-update.hook'...
[2023-05-04T18:31:14+0200] [ALPM] running '30-update-mime-database.hook'...
[2023-05-04T18:31:14+0200] [ALPM] running '60-depmod.hook'...
[2023-05-04T18:31:16+0200] [ALPM] running '70-dkms-install.hook'...
[2023-05-04T18:31:16+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod tuxedo-keyboard/3.0.10 -k 6.3.1-arch1-1
[2023-05-04T18:31:18+0200] [ALPM-SCRIPTLET] Error! Bad return status for module build on kernel: 6.3.1-arch1-1 (x86_64)
[2023-05-04T18:31:18+0200] [ALPM-SCRIPTLET] Consult /var/lib/dkms/tuxedo-keyboard/3.0.10/build/make.log for more information.
[2023-05-04T18:31:18+0200] [ALPM-SCRIPTLET] ==> WARNING: `dkms install --no-depmod tuxedo-keyboard/3.0.10 -k 6.3.1-arch1-1' exited 10
[2023-05-04T18:31:18+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod vboxhost/7.0.8_OSE -k 6.3.1-arch1-1
[2023-05-04T18:31:23+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod evdi/1.13.1 -k 6.3.1-arch1-1
[2023-05-04T18:31:26+0200] [ALPM-SCRIPTLET] ==> depmod 6.3.1-arch1-1
[2023-05-04T18:31:27+0200] [ALPM] running '90-mkinitcpio-install.hook'...
[2023-05-04T18:31:27+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-hardened.preset: 'default'
[2023-05-04T18:31:27+0200] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-hardened -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-hardened.img --microcode /boot/amd-ucode.img
[2023-05-04T18:31:27+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.1.27-hardened1-2-hardened'
[2023-05-04T18:31:28+0200] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2023-05-04T18:31:28+0200] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2023-05-04T18:31:28+0200] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2023-05-04T18:31:28+0200] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2023-05-04T18:31:28+0200] [ALPM-SCRIPTLET]   -> Running build hook: [kms]
[2023-05-04T18:31:30+0200] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2023-05-04T18:31:30+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2023-05-04T18:31:30+0200] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2023-05-04T18:31:30+0200] [ALPM-SCRIPTLET] loadkeys: Unable to open file: eu: No such file or directory
[2023-05-04T18:31:30+0200] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2023-05-04T18:31:30+0200] [ALPM-SCRIPTLET] ==> WARNING: consolefont: no font found in configuration
[2023-05-04T18:31:30+0200] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-hardened.img'
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET] ==> Image generation successful
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-hardened.preset: 'fallback'
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-hardened -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-hardened-fallback.img -S autodetect --microcode /boot/amd-ucode.img
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.1.27-hardened1-2-hardened'
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET]   -> Running build hook: [kms]
[2023-05-04T18:31:31+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'ast'
[2023-05-04T18:31:36+0200] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2023-05-04T18:31:36+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2023-05-04T18:31:37+0200] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2023-05-04T18:31:37+0200] [ALPM-SCRIPTLET] loadkeys: Unable to open file: eu: No such file or directory
[2023-05-04T18:31:37+0200] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2023-05-04T18:31:37+0200] [ALPM-SCRIPTLET] ==> WARNING: consolefont: no font found in configuration
[2023-05-04T18:31:37+0200] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2023-05-04T18:31:37+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2023-05-04T18:31:37+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2023-05-04T18:31:37+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2023-05-04T18:31:37+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2023-05-04T18:31:37+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2023-05-04T18:31:37+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2023-05-04T18:31:38+0200] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2023-05-04T18:31:39+0200] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2023-05-04T18:31:40+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2023-05-04T18:31:40+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-hardened-fallback.img'
[2023-05-04T18:31:41+0200] [ALPM-SCRIPTLET] ==> Image generation successful
[2023-05-04T18:31:41+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2023-05-04T18:31:41+0200] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img --microcode /boot/amd-ucode.img
[2023-05-04T18:31:41+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.3.1-arch1-1'
[2023-05-04T18:31:41+0200] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2023-05-04T18:31:41+0200] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2023-05-04T18:31:41+0200] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2023-05-04T18:31:42+0200] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2023-05-04T18:31:42+0200] [ALPM-SCRIPTLET]   -> Running build hook: [kms]
[2023-05-04T18:31:43+0200] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2023-05-04T18:31:43+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2023-05-04T18:31:43+0200] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2023-05-04T18:31:43+0200] [ALPM-SCRIPTLET] loadkeys: Unable to open file: eu: No such file or directory
[2023-05-04T18:31:43+0200] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2023-05-04T18:31:43+0200] [ALPM-SCRIPTLET] ==> WARNING: consolefont: no font found in configuration
[2023-05-04T18:31:43+0200] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2023-05-04T18:31:44+0200] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2023-05-04T18:31:44+0200] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2023-05-04T18:31:44+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2023-05-04T18:31:44+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
[2023-05-04T18:31:44+0200] [ALPM-SCRIPTLET] ==> Image generation successful
[2023-05-04T18:31:44+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2023-05-04T18:31:44+0200] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect --microcode /boot/amd-ucode.img
[2023-05-04T18:31:44+0200] [ALPM-SCRIPTLET] ==> Starting build: '6.3.1-arch1-1'
[2023-05-04T18:31:44+0200] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2023-05-04T18:31:45+0200] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2023-05-04T18:31:45+0200] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2023-05-04T18:31:45+0200] [ALPM-SCRIPTLET]   -> Running build hook: [kms]
[2023-05-04T18:31:45+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'ast'
[2023-05-04T18:31:49+0200] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2023-05-04T18:31:49+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2023-05-04T18:31:50+0200] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2023-05-04T18:31:50+0200] [ALPM-SCRIPTLET] loadkeys: Unable to open file: eu: No such file or directory
[2023-05-04T18:31:50+0200] [ALPM-SCRIPTLET]   -> Running build hook: [consolefont]
[2023-05-04T18:31:50+0200] [ALPM-SCRIPTLET] ==> WARNING: consolefont: no font found in configuration
[2023-05-04T18:31:50+0200] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2023-05-04T18:31:50+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2023-05-04T18:31:50+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2023-05-04T18:31:50+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2023-05-04T18:31:50+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2023-05-04T18:31:50+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2023-05-04T18:31:50+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2023-05-04T18:31:52+0200] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2023-05-04T18:31:52+0200] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2023-05-04T18:31:53+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2023-05-04T18:31:53+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
[2023-05-04T18:31:54+0200] [ALPM-SCRIPTLET] ==> Image generation successful
[2023-05-04T18:31:54+0200] [ALPM] running 'dbus-reload.hook'...
[2023-05-04T18:31:54+0200] [ALPM] running 'detect-old-perl-modules.hook'...
[2023-05-04T18:31:54+0200] [ALPM] running 'fontconfig.hook'...
[2023-05-04T18:31:54+0200] [ALPM] running 'gdk-pixbuf-query-loaders.hook'...
[2023-05-04T18:31:54+0200] [ALPM] running 'glib-compile-schemas.hook'...
[2023-05-04T18:31:54+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2023-05-04T18:31:54+0200] [ALPM] running 'texinfo-install.hook'...
[2023-05-04T18:31:56+0200] [ALPM] running 'update-desktop-database.hook'...
[2023-05-04T18:31:56+0200] [ALPM] running 'xorg-mkfontscale.hook'...
[2023-05-04T18:32:00+0200] [PACMAN] Running 'pacman -S -y --config /etc/pacman.conf --'
[2023-05-04T18:32:00+0200] [PACMAN] synchronizing package lists

I use xcfce4 with "Enable display compositing" set to active.

Recarding the mouse condition, I can't tell which of the options in the modesetting are relevant to my case.

contents of .local/share/xorg/Xorg.0.log:

[    14.224] 
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[    14.224] Current Operating System: Linux tux 6.3.1-arch1-1 #1 SMP PREEMPT_DYNAMIC Mon, 01 May 2023 17:42:39 +0000 x86_64
[    14.224] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=08431b7c-6f37-4216-bb9c-ce692a825d53 rw loglevel=3 quiet
[    14.224]  
[    14.224] Current version of pixman: 0.42.2
[    14.224] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    14.224] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.225] (==) Log file: "/home/denis/.local/share/xorg/Xorg.0.log", Time: Thu May  4 20:47:35 2023
[    14.226] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    14.227] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.227] (==) No Layout section.  Using the first Screen section.
[    14.227] (==) No screen section available. Using defaults.
[    14.227] (**) |-->Screen "Default Screen Section" (0)
[    14.227] (**) |   |-->Monitor "<default monitor>"
[    14.228] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    14.228] (==) Automatically adding devices
[    14.228] (==) Automatically enabling devices
[    14.228] (==) Automatically adding GPU devices
[    14.228] (==) Automatically binding GPU devices
[    14.228] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    14.228] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    14.228] 	Entry deleted from font path.
[    14.228] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    14.228] 	Entry deleted from font path.
[    14.228] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    14.228] 	Entry deleted from font path.
[    14.229] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    14.229] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.229] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.229] (II) Module ABI versions:
[    14.229] 	X.Org ANSI C Emulation: 0.4
[    14.229] 	X.Org Video Driver: 25.2
[    14.229] 	X.Org XInput driver : 24.4
[    14.229] 	X.Org Server Extension : 10.0
[    14.230] (++) using VT number 1

[    14.233] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    14.233] (II) xfree86: Adding drm device (/dev/dri/card0)
[    14.233] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:04:00.0/drm/card0
[    14.234] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[    14.238] (--) PCI:*(4@0:0:0) 1002:1636:1d05:109f rev 198, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xfe600000/524288, I/O @ 0x0000e000/256
[    14.238] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    14.238] (II) LoadModule: "glx"
[    14.238] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.242] (II) Module glx: vendor="X.Org Foundation"
[    14.242] 	compiled for 1.21.1.8, module version = 1.0.0
[    14.242] 	ABI class: X.Org Server Extension, version 10.0
[    14.242] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[    14.242] 	loading driver: amdgpu
[    14.242] (==) Matched amdgpu as autoconfigured driver 0
[    14.242] (==) Matched ati as autoconfigured driver 1
[    14.242] (==) Matched modesetting as autoconfigured driver 2
[    14.242] (==) Matched fbdev as autoconfigured driver 3
[    14.242] (==) Matched vesa as autoconfigured driver 4
[    14.242] (==) Assigned the driver to the xf86ConfigLayout
[    14.242] (II) LoadModule: "amdgpu"
[    14.243] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[    14.244] (II) Module amdgpu: vendor="X.Org Foundation"
[    14.244] 	compiled for 1.21.1.7, module version = 23.0.0
[    14.244] 	Module class: X.Org Video Driver
[    14.244] 	ABI class: X.Org Video Driver, version 25.2
[    14.244] (II) LoadModule: "ati"
[    14.245] (WW) Warning, couldn't open module ati
[    14.245] (EE) Failed to load module "ati" (module does not exist, 0)
[    14.245] (II) LoadModule: "modesetting"
[    14.245] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    14.245] (II) Module modesetting: vendor="X.Org Foundation"
[    14.245] 	compiled for 1.21.1.8, module version = 1.21.1
[    14.245] 	Module class: X.Org Video Driver
[    14.245] 	ABI class: X.Org Video Driver, version 25.2
[    14.245] (II) LoadModule: "fbdev"
[    14.245] (WW) Warning, couldn't open module fbdev
[    14.245] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    14.245] (II) LoadModule: "vesa"
[    14.245] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    14.246] (II) Module vesa: vendor="X.Org Foundation"
[    14.246] 	compiled for 1.21.1.4, module version = 2.6.0
[    14.246] 	Module class: X.Org Video Driver
[    14.246] 	ABI class: X.Org Video Driver, version 25.2
[    14.246] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[    14.246] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    14.246] (II) VESA: driver for VESA chipsets: vesa
[    14.246] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[    14.249] (WW) Falling back to old probe method for modesetting
[    14.249] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    14.249] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    14.249] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[    14.249] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    14.249] (==) AMDGPU(0): Default visual is TrueColor
[    14.249] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card0
[    14.249] (==) AMDGPU(0): RGB weight 888
[    14.249] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[    14.249] (--) AMDGPU(0): Chipset: "AMD Radeon Graphics" (ChipID = 0x1636)
[    14.249] (II) Loading sub module "fb"
[    14.249] (II) LoadModule: "fb"
[    14.249] (II) Module "fb" already built-in
[    14.249] (II) Loading sub module "dri2"
[    14.249] (II) LoadModule: "dri2"
[    14.249] (II) Module "dri2" already built-in
[    14.361] (II) Loading sub module "glamoregl"
[    14.361] (II) LoadModule: "glamoregl"
[    14.361] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    14.366] (II) Module glamoregl: vendor="X.Org Foundation"
[    14.366] 	compiled for 1.21.1.8, module version = 1.0.1
[    14.366] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.380] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon Graphics (renoir, LLVM 15.0.7, DRM 3.52, 6.3.1-arch1-1)
[    14.380] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[    14.380] (==) AMDGPU(0): TearFree property default: auto
[    14.380] (==) AMDGPU(0): VariableRefresh: disabled
[    14.380] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[    14.380] (II) AMDGPU(0): KMS Pageflipping: enabled
[    14.382] (II) AMDGPU(0): Output eDP has no monitor section
[    14.382] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[    14.396] (II) AMDGPU(0): EDID for output eDP
[    14.396] (II) AMDGPU(0): Manufacturer: CMN  Model: 14d5  Serial#: 0
[    14.396] (II) AMDGPU(0): Year: 2016  Week: 40
[    14.396] (II) AMDGPU(0): EDID Version: 1.4
[    14.396] (II) AMDGPU(0): Digital Display Input
[    14.396] (II) AMDGPU(0): 8 bits per channel
[    14.396] (II) AMDGPU(0): Digital interface is DisplayPort
[    14.396] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[    14.396] (II) AMDGPU(0): Gamma: 2.20
[    14.396] (II) AMDGPU(0): No DPMS capabilities specified
[    14.396] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 
[    14.396] (II) AMDGPU(0): First detailed timing is preferred mode
[    14.396] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[    14.396] (II) AMDGPU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    14.396] (II) AMDGPU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    14.396] (II) AMDGPU(0): Manufacturer's mask: 0
[    14.396] (II) AMDGPU(0): Supported detailed timing:
[    14.396] (II) AMDGPU(0): clock: 152.8 MHz   Image Size:  309 x 173 mm
[    14.396] (II) AMDGPU(0): h_active: 1920  h_sync: 2000  h_sync_end 2060 h_blank_end 2250 h_border: 0
[    14.396] (II) AMDGPU(0): v_active: 1080  v_sync: 1086  v_sync_end 1094 v_blanking: 1132 v_border: 0
[    14.396] (II) AMDGPU(0):  N140HCE-EN2
[    14.396] (II) AMDGPU(0):  CMN
[    14.396] (II) AMDGPU(0):  N140HCE-EN2
[    14.396] (II) AMDGPU(0): EDID (in hex):
[    14.396] (II) AMDGPU(0): 	00ffffffffffff000daed51400000000
[    14.396] (II) AMDGPU(0): 	281a0104a51f117802ee95a3544c9926
[    14.396] (II) AMDGPU(0): 	0f505400000001010101010101010101
[    14.396] (II) AMDGPU(0): 	010101010101b43b804a71383440503c
[    14.396] (II) AMDGPU(0): 	680035ad10000018000000fe004e3134
[    14.396] (II) AMDGPU(0): 	304843452d454e320a20000000fe0043
[    14.396] (II) AMDGPU(0): 	4d4e0a202020202020202020000000fe
[    14.396] (II) AMDGPU(0): 	004e3134304843452d454e320a200010
[    14.396] (II) AMDGPU(0): Printing probed modes for output eDP
[    14.396] (II) AMDGPU(0): Modeline "1920x1080"x60.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    14.396] (II) AMDGPU(0): Modeline "1680x1050"x60.0  152.84  1680 2000 2060 2250  1050 1086 1094 1132 -hsync -vsync (67.9 kHz e)
[    14.396] (II) AMDGPU(0): Modeline "1280x1024"x60.0  152.84  1280 2000 2060 2250  1024 1086 1094 1132 -hsync -vsync (67.9 kHz e)
[    14.396] (II) AMDGPU(0): Modeline "1440x900"x60.0  152.84  1440 2000 2060 2250  900 1086 1094 1132 -hsync -vsync (67.9 kHz e)
[    14.396] (II) AMDGPU(0): Modeline "1280x800"x60.0  152.84  1280 2000 2060 2250  800 1086 1094 1132 -hsync -vsync (67.9 kHz e)
[    14.396] (II) AMDGPU(0): Modeline "1280x720"x60.0  152.84  1280 2000 2060 2250  720 1086 1094 1132 -hsync -vsync (67.9 kHz e)
[    14.396] (II) AMDGPU(0): Modeline "1024x768"x60.0  152.84  1024 2000 2060 2250  768 1086 1094 1132 -hsync -vsync (67.9 kHz e)
[    14.396] (II) AMDGPU(0): Modeline "800x600"x60.0  152.84  800 2000 2060 2250  600 1086 1094 1132 -hsync -vsync (67.9 kHz e)
[    14.396] (II) AMDGPU(0): Modeline "640x480"x60.0  152.84  640 2000 2060 2250  480 1086 1094 1132 -hsync -vsync (67.9 kHz e)
[    14.396] (II) AMDGPU(0): EDID for output HDMI-A-0
[    14.396] (II) AMDGPU(0): Output eDP connected
[    14.396] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[    14.396] (II) AMDGPU(0): Using exact sizes for initial modes
[    14.396] (II) AMDGPU(0): Output eDP using initial mode 1920x1080 +0+0
[    14.396] (II) AMDGPU(0): mem size init: gart size :3d82a7000 vram size: s:1df68000 visible:1df68000
[    14.396] (==) AMDGPU(0): DPI set to (96, 96)
[    14.396] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[    14.396] (II) Loading sub module "ramdac"
[    14.396] (II) LoadModule: "ramdac"
[    14.396] (II) Module "ramdac" already built-in
[    14.396] (II) UnloadModule: "modesetting"
[    14.396] (II) Unloading modesetting
[    14.396] (II) UnloadModule: "vesa"
[    14.396] (II) Unloading vesa
[    14.397] (II) AMDGPU(0): [DRI2] Setup complete
[    14.397] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[    14.397] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[    14.429] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[    14.430] (II) AMDGPU(0): SYNC extension fences enabled
[    14.430] (II) AMDGPU(0): Present extension enabled
[    14.430] (==) AMDGPU(0): DRI3 enabled
[    14.430] (==) AMDGPU(0): Backing store enabled
[    14.430] (II) AMDGPU(0): Direct rendering enabled
[    14.442] (II) AMDGPU(0): Use GLAMOR acceleration.
[    14.442] (II) AMDGPU(0): Acceleration enabled
[    14.442] (==) AMDGPU(0): DPMS enabled
[    14.442] (==) AMDGPU(0): Silken mouse enabled
[    14.442] (II) AMDGPU(0): Set up textured video (glamor)
[    14.461] (WW) AMDGPU(0): Option "HotplugDriver" is not used
[    14.461] (II) Initializing extension Generic Event Extension
[    14.461] (II) Initializing extension SHAPE
[    14.461] (II) Initializing extension MIT-SHM
[    14.461] (II) Initializing extension XInputExtension
[    14.461] (II) Initializing extension XTEST
[    14.461] (II) Initializing extension BIG-REQUESTS
[    14.461] (II) Initializing extension SYNC
[    14.461] (II) Initializing extension XKEYBOARD
[    14.461] (II) Initializing extension XC-MISC
[    14.462] (II) Initializing extension SECURITY
[    14.462] (II) Initializing extension XFIXES
[    14.462] (II) Initializing extension RENDER
[    14.462] (II) Initializing extension RANDR
[    14.462] (II) Initializing extension COMPOSITE
[    14.462] (II) Initializing extension DAMAGE
[    14.462] (II) Initializing extension MIT-SCREEN-SAVER
[    14.462] (II) Initializing extension DOUBLE-BUFFER
[    14.462] (II) Initializing extension RECORD
[    14.462] (II) Initializing extension DPMS
[    14.463] (II) Initializing extension Present
[    14.463] (II) Initializing extension DRI3
[    14.463] (II) Initializing extension X-Resource
[    14.463] (II) Initializing extension XVideo
[    14.463] (II) Initializing extension XVideo-MotionCompensation
[    14.463] (II) Initializing extension GLX
[    14.468] (II) AIGLX: Loaded and initialized radeonsi
[    14.468] (II) GLX: Initialized DRI2 GL provider for screen 0
[    14.468] (II) Initializing extension XFree86-VidModeExtension
[    14.468] (II) Initializing extension XFree86-DGA
[    14.469] (II) Initializing extension XFree86-DRI
[    14.469] (II) Initializing extension DRI2
[    14.469] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[    14.569] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    14.569] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    14.569] (**) Power Button: Applying InputClass "system-keyboard"
[    14.569] (II) LoadModule: "libinput"
[    14.569] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    14.572] (II) Module libinput: vendor="X.Org Foundation"
[    14.572] 	compiled for 1.21.1.8, module version = 1.3.0
[    14.572] 	Module class: X.Org XInput Driver
[    14.572] 	ABI class: X.Org XInput driver, version 24.4
[    14.572] (II) Using input driver 'libinput' for 'Power Button'
[    14.573] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 27 paused 0
[    14.573] (**) Power Button: always reports core events
[    14.573] (**) Option "Device" "/dev/input/event3"
[    14.579] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    14.579] (II) event3  - Power Button: device is a keyboard
[    14.580] (II) event3  - Power Button: device removed
[    14.580] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    14.580] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    14.580] (**) Option "xkb_layout" "eu"
[    14.598] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    14.598] (II) event3  - Power Button: device is a keyboard
[    14.599] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    14.599] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    14.599] (**) Video Bus: Applying InputClass "system-keyboard"
[    14.599] (II) Using input driver 'libinput' for 'Video Bus'
[    14.601] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 30 paused 0
[    14.601] (**) Video Bus: always reports core events
[    14.601] (**) Option "Device" "/dev/input/event4"
[    14.602] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    14.602] (II) event4  - Video Bus: device is a keyboard
[    14.602] (II) event4  - Video Bus: device removed
[    14.602] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1e/LNXVIDEO:00/input/input4/event4"
[    14.602] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    14.602] (**) Option "xkb_layout" "eu"
[    14.603] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    14.604] (II) event4  - Video Bus: device is a keyboard
[    14.605] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    14.605] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    14.605] (**) Power Button: Applying InputClass "system-keyboard"
[    14.605] (II) Using input driver 'libinput' for 'Power Button'
[    14.606] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 31 paused 0
[    14.606] (**) Power Button: always reports core events
[    14.606] (**) Option "Device" "/dev/input/event0"
[    14.607] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    14.607] (II) event0  - Power Button: device is a keyboard
[    14.607] (II) event0  - Power Button: device removed
[    14.607] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    14.607] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    14.607] (**) Option "xkb_layout" "eu"
[    14.608] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    14.608] (II) event0  - Power Button: device is a keyboard
[    14.608] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    14.608] (II) No input driver specified, ignoring this device.
[    14.608] (II) This device may have been added with another device file.
[    14.609] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    14.609] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    14.609] (**) Sleep Button: Applying InputClass "system-keyboard"
[    14.609] (II) Using input driver 'libinput' for 'Sleep Button'
[    14.610] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 32 paused 0
[    14.610] (**) Sleep Button: always reports core events
[    14.610] (**) Option "Device" "/dev/input/event1"
[    14.611] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    14.611] (II) event1  - Sleep Button: device is a keyboard
[    14.611] (II) event1  - Sleep Button: device removed
[    14.611] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    14.611] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    14.611] (**) Option "xkb_layout" "eu"
[    14.612] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    14.612] (II) event1  - Sleep Button: device is a keyboard
[    14.612] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[    14.612] (II) No input driver specified, ignoring this device.
[    14.612] (II) This device may have been added with another device file.
[    14.613] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event10)
[    14.613] (II) No input driver specified, ignoring this device.
[    14.613] (II) This device may have been added with another device file.
[    14.613] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event11)
[    14.613] (II) No input driver specified, ignoring this device.
[    14.613] (II) This device may have been added with another device file.
[    14.613] (II) config/udev: Adding input device UNIW0001:00 093A:0255 Touchpad (/dev/input/event8)
[    14.613] (**) UNIW0001:00 093A:0255 Touchpad: Applying InputClass "libinput touchpad catchall"
[    14.613] (**) UNIW0001:00 093A:0255 Touchpad: Applying InputClass "touchpad"
[    14.613] (II) Using input driver 'libinput' for 'UNIW0001:00 093A:0255 Touchpad'
[    14.615] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 33 paused 0
[    14.615] (**) UNIW0001:00 093A:0255 Touchpad: always reports core events
[    14.615] (**) Option "Device" "/dev/input/event8"
[    14.615] (II) event8  - UNIW0001:00 093A:0255 Touchpad: is tagged by udev as: Touchpad
[    14.617] (II) event8  - UNIW0001:00 093A:0255 Touchpad: device is a touchpad
[    14.617] (II) event8  - UNIW0001:00 093A:0255 Touchpad: device removed
[    14.617] (**) Option "Tapping" "on"
[    14.617] (II) libinput: UNIW0001:00 093A:0255 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    14.617] (II) libinput: UNIW0001:00 093A:0255 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    14.617] (II) libinput: UNIW0001:00 093A:0255 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    14.618] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:02/i2c-0/i2c-UNIW0001:00/0018:093A:0255.0001/input/input10/event8"
[    14.618] (II) XINPUT: Adding extended input device "UNIW0001:00 093A:0255 Touchpad" (type: TOUCHPAD, id 10)
[    14.619] (**) Option "AccelerationScheme" "none"
[    14.619] (**) UNIW0001:00 093A:0255 Touchpad: (accel) selected scheme none/0
[    14.619] (**) UNIW0001:00 093A:0255 Touchpad: (accel) acceleration factor: 2.000
[    14.619] (**) UNIW0001:00 093A:0255 Touchpad: (accel) acceleration threshold: 4
[    14.620] (II) event8  - UNIW0001:00 093A:0255 Touchpad: is tagged by udev as: Touchpad
[    14.621] (II) event8  - UNIW0001:00 093A:0255 Touchpad: device is a touchpad
[    14.622] (II) config/udev: Adding input device UNIW0001:00 093A:0255 Touchpad (/dev/input/mouse1)
[    14.622] (**) UNIW0001:00 093A:0255 Touchpad: Applying InputClass "touchpad"
[    14.622] (II) Using input driver 'libinput' for 'UNIW0001:00 093A:0255 Touchpad'
[    14.622] (**) UNIW0001:00 093A:0255 Touchpad: always reports core events
[    14.622] (**) Option "Device" "/dev/input/mouse1"
[    14.622] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse1
	Permission denied.
[    14.622] (II) mouse1: opening input device '/dev/input/mouse1' failed (Permission denied).
[    14.622] (II) mouse1  - failed to create input device '/dev/input/mouse1'.
[    14.622] (EE) libinput: UNIW0001:00 093A:0255 Touchpad: Failed to create a device for /dev/input/mouse1
[    14.622] (EE) PreInit returned 2 for "UNIW0001:00 093A:0255 Touchpad"
[    14.622] (II) UnloadModule: "libinput"
[    14.623] (II) config/udev: Adding input device UNIW0001:00 093A:0255 Mouse (/dev/input/event7)
[    14.623] (**) UNIW0001:00 093A:0255 Mouse: Applying InputClass "libinput pointer catchall"
[    14.623] (II) Using input driver 'libinput' for 'UNIW0001:00 093A:0255 Mouse'
[    14.624] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 34 paused 0
[    14.624] (**) UNIW0001:00 093A:0255 Mouse: always reports core events
[    14.624] (**) Option "Device" "/dev/input/event7"
[    14.625] (II) event7  - UNIW0001:00 093A:0255 Mouse: is tagged by udev as: Mouse Pointingstick
[    14.625] (II) event7  - UNIW0001:00 093A:0255 Mouse: device is a pointer
[    14.626] (II) event7  - UNIW0001:00 093A:0255 Mouse: device removed
[    14.626] (II) libinput: UNIW0001:00 093A:0255 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    14.626] (II) libinput: UNIW0001:00 093A:0255 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    14.626] (II) libinput: UNIW0001:00 093A:0255 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    14.626] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:02/i2c-0/i2c-UNIW0001:00/0018:093A:0255.0001/input/input9/event7"
[    14.626] (II) XINPUT: Adding extended input device "UNIW0001:00 093A:0255 Mouse" (type: MOUSE, id 11)
[    14.626] (**) Option "AccelerationScheme" "none"
[    14.626] (**) UNIW0001:00 093A:0255 Mouse: (accel) selected scheme none/0
[    14.626] (**) UNIW0001:00 093A:0255 Mouse: (accel) acceleration factor: 2.000
[    14.626] (**) UNIW0001:00 093A:0255 Mouse: (accel) acceleration threshold: 4
[    14.627] (II) event7  - UNIW0001:00 093A:0255 Mouse: is tagged by udev as: Mouse Pointingstick
[    14.627] (II) event7  - UNIW0001:00 093A:0255 Mouse: device is a pointer
[    14.628] (II) config/udev: Adding input device UNIW0001:00 093A:0255 Mouse (/dev/input/mouse0)
[    14.628] (II) No input driver specified, ignoring this device.
[    14.628] (II) This device may have been added with another device file.
[    14.629] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[    14.629] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    14.629] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    14.629] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    14.630] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 35 paused 0
[    14.630] (**) AT Translated Set 2 keyboard: always reports core events
[    14.630] (**) Option "Device" "/dev/input/event5"
[    14.631] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    14.631] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[    14.632] (II) event5  - AT Translated Set 2 keyboard: device removed
[    14.632] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[    14.632] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    14.632] (**) Option "xkb_layout" "eu"
[    14.632] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    14.633] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[    14.634] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    14.634] (II) No input driver specified, ignoring this device.
[    14.634] (II) This device may have been added with another device file.
[    14.636] (II) config/udev: Adding input device LogiOps Virtual Input (/dev/input/event12)
[    14.636] (**) LogiOps Virtual Input: Applying InputClass "libinput keyboard catchall"
[    14.636] (**) LogiOps Virtual Input: Applying InputClass "system-keyboard"
[    14.636] (II) Using input driver 'libinput' for 'LogiOps Virtual Input'
[    14.637] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 36 paused 0
[    14.637] (**) LogiOps Virtual Input: always reports core events
[    14.637] (**) Option "Device" "/dev/input/event12"
[    14.637] (II) event12 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[    14.637] (II) event12 - LogiOps Virtual Input: device is a keyboard
[    14.638] (II) event12 - LogiOps Virtual Input: device removed
[    14.638] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event12"
[    14.638] (II) XINPUT: Adding extended input device "LogiOps Virtual Input" (type: KEYBOARD, id 13)
[    14.638] (**) Option "xkb_layout" "eu"
[    14.638] (II) event12 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[    14.638] (II) event12 - LogiOps Virtual Input: device is a keyboard
[    17.582] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    17.582] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    17.582] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    18.288] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    18.288] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    18.288] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    18.317] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    18.317] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    18.317] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    25.234] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    25.234] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    25.234] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    25.234] (II) config/udev: removing GPU device /sys/devices/platform/evdi.0/drm/card1 /dev/dri/card1
[    25.234] (II) config/udev: Adding drm device (/dev/dri/card1)
[    25.234] (II) xfree86: Adding drm device (/dev/dri/card1)
[    25.234] (II) Platform probe for /sys/devices/platform/evdi.0/drm/card1
[    25.234] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 73 paused 0
[    25.234] (II) LoadModule: "modesetting"
[    25.235] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    25.235] (II) Module modesetting: vendor="X.Org Foundation"
[    25.235] 	compiled for 1.21.1.8, module version = 1.21.1
[    25.235] 	Module class: X.Org Video Driver
[    25.235] 	ABI class: X.Org Video Driver, version 25.2
[    25.235] (II) modeset(G0): using drv /dev/dri/card1
[    25.235] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    25.235] (II) Applying OutputClass "DisplayLink" options to /dev/dri/card1
[    25.235] (**) modeset(G0): Option "AccelMethod" "none"
[    25.235] (==) modeset(G0): RGB weight 888
[    25.235] (==) modeset(G0): Default visual is TrueColor
[    25.235] (**) modeset(G0): glamor disabled
[    25.235] (II) modeset(G0): ShadowFB: preferred NO, enabled NO
[    25.235] (II) modeset(G0): Output DVI-I-1-1 using monitor section DVI-I-1-1
[    25.235] (**) modeset(G0): Option "PreferredMode" "wide4k"
[    25.235] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    25.235] (**) modeset(G0): Display dimensions: (310, 170) mm
[    25.235] (**) modeset(G0): DPI set to (83, 114)
[    25.235] (II) Loading sub module "fb"
[    25.235] (II) LoadModule: "fb"
[    25.235] (II) Module "fb" already built-in
[    25.235] (==) modeset(G0): Backing store enabled
[    25.235] (==) modeset(G0): Silken mouse enabled
[    25.235] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[    25.235] (==) modeset(G0): DPMS enabled
[    25.236] (II) modeset(G0): Damage tracking initialized
[    25.238] xf86: found device 2
[    25.339] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    25.339] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    25.339] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    25.342] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    25.342] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    25.342] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    25.348] (II) AMDGPU(0): Allocate new frame buffer 5760x2160
[    25.348] (II) AMDGPU(0):  => pitch 23040 bytes
[    25.404] randr: falling back to unsynchronized pixmap sharing
[    25.550] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    25.550] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    25.550] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    26.590] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    26.590] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    26.590] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    26.645] (II) config/udev: Adding input device Topre Corporation HHKB Professional (/dev/input/event13)
[    26.645] (**) Topre Corporation HHKB Professional: Applying InputClass "libinput keyboard catchall"
[    26.645] (**) Topre Corporation HHKB Professional: Applying InputClass "system-keyboard"
[    26.645] (II) Using input driver 'libinput' for 'Topre Corporation HHKB Professional'
[    26.645] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 72 paused 0
[    26.646] (**) Topre Corporation HHKB Professional: always reports core events
[    26.646] (**) Option "Device" "/dev/input/event13"
[    26.647] (II) event13 - Topre Corporation HHKB Professional: is tagged by udev as: Keyboard
[    26.647] (II) event13 - Topre Corporation HHKB Professional: device is a keyboard
[    26.647] (II) event13 - Topre Corporation HHKB Professional: device removed
[    26.647] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3.1/3-1.4.3.1:1.0/0003:0853:0100.0003/input/input15/event13"
[    26.647] (II) XINPUT: Adding extended input device "Topre Corporation HHKB Professional" (type: KEYBOARD, id 14)
[    26.647] (**) Option "xkb_layout" "eu"
[    26.649] (II) event13 - Topre Corporation HHKB Professional: is tagged by udev as: Keyboard
[    26.649] (II) event13 - Topre Corporation HHKB Professional: device is a keyboard
[    26.673] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    26.673] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    26.673] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    26.675] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    26.675] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    26.675] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    26.690] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    26.690] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    26.690] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    27.751] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    27.751] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    27.751] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    27.859] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    27.859] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    27.859] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    27.862] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    27.862] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    27.862] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    27.884] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    27.884] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    27.884] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    28.422] (II) config/udev: Adding input device Logitech MX Master 3 (/dev/input/mouse2)
[    28.422] (**) Logitech MX Master 3: Applying InputClass "system-keyboard"
[    28.422] (II) No input driver specified, ignoring this device.
[    28.422] (II) This device may have been added with another device file.
[    28.495] (II) config/udev: Adding input device Logitech MX Master 3 (/dev/input/event14)
[    28.495] (**) Logitech MX Master 3: Applying InputClass "libinput pointer catchall"
[    28.495] (**) Logitech MX Master 3: Applying InputClass "libinput keyboard catchall"
[    28.495] (**) Logitech MX Master 3: Applying InputClass "system-keyboard"
[    28.495] (II) Using input driver 'libinput' for 'Logitech MX Master 3'
[    28.496] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 74 paused 0
[    28.496] (**) Logitech MX Master 3: always reports core events
[    28.496] (**) Option "Device" "/dev/input/event14"
[    28.499] (II) event14 - Logitech MX Master 3: is tagged by udev as: Keyboard Mouse
[    28.499] (II) event14 - Logitech MX Master 3: device is a pointer
[    28.499] (II) event14 - Logitech MX Master 3: device is a keyboard
[    28.500] (II) event14 - Logitech MX Master 3: device removed
[    28.500] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    28.500] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    28.500] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    28.500] (II) libinput: Logitech MX Master 3: needs a virtual subdevice
[    28.500] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3.2/3-1.4.3.2:1.2/0003:046D:C52B.0006/0003:046D:4082.0008/input/input26/event14"
[    28.500] (II) XINPUT: Adding extended input device "Logitech MX Master 3" (type: MOUSE, id 15)
[    28.501] (**) Option "AccelerationScheme" "none"
[    28.501] (**) Logitech MX Master 3: (accel) selected scheme none/0
[    28.501] (**) Logitech MX Master 3: (accel) acceleration factor: 2.000
[    28.501] (**) Logitech MX Master 3: (accel) acceleration threshold: 4
[    28.504] (II) event14 - Logitech MX Master 3: is tagged by udev as: Keyboard Mouse
[    28.505] (II) event14 - Logitech MX Master 3: device is a pointer
[    28.505] (II) event14 - Logitech MX Master 3: device is a keyboard
[    28.506] (**) Logitech MX Master 3: Applying InputClass "libinput pointer catchall"
[    28.506] (**) Logitech MX Master 3: Applying InputClass "libinput keyboard catchall"
[    28.506] (**) Logitech MX Master 3: Applying InputClass "system-keyboard"
[    28.506] (II) Using input driver 'libinput' for 'Logitech MX Master 3'
[    28.506] (II) systemd-logind: returning pre-existing fd for /dev/input/event14 13:78
[    28.506] (**) Logitech MX Master 3: always reports core events
[    28.506] (**) Option "Device" "/dev/input/event14"
[    28.506] (II) libinput: Logitech MX Master 3: is a virtual subdevice
[    28.506] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    28.506] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    28.506] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    28.506] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3.2/3-1.4.3.2:1.2/0003:046D:C52B.0006/0003:046D:4082.0008/input/input26/event14"
[    28.506] (II) XINPUT: Adding extended input device "Logitech MX Master 3" (type: KEYBOARD, id 16)
[    28.506] (**) Option "xkb_layout" "eu"
[    28.935] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    28.935] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    28.935] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    30.690] (II) event12 - LogiOps Virtual Input: device removed
[    30.693] (II) config/udev: removing device LogiOps Virtual Input
[    30.693] (**) Option "fd" "36"
[    30.693] (II) UnloadModule: "libinput"
[    30.693] (II) systemd-logind: releasing fd for 13:76
[    30.751] (II) config/udev: Adding input device LogiOps Virtual Input (/dev/input/event12)
[    30.751] (**) LogiOps Virtual Input: Applying InputClass "libinput keyboard catchall"
[    30.751] (**) LogiOps Virtual Input: Applying InputClass "system-keyboard"
[    30.751] (II) Using input driver 'libinput' for 'LogiOps Virtual Input'
[    30.803] (EE) systemd-logind: failed to take device /dev/input/event12: No such device
[    30.803] (**) LogiOps Virtual Input: always reports core events
[    30.803] (**) Option "Device" "/dev/input/event12"
[    30.803] (EE) client bug: Invalid path /dev/input/event12
[    30.803] (EE) libinput: LogiOps Virtual Input: Failed to create a device for /dev/input/event12
[    30.803] (EE) PreInit returned 2 for "LogiOps Virtual Input"
[    30.803] (II) UnloadModule: "libinput"
[    30.917] (II) config/udev: Adding input device LogiOps Virtual Input (/dev/input/event12)
[    30.917] (**) LogiOps Virtual Input: Applying InputClass "libinput keyboard catchall"
[    30.917] (**) LogiOps Virtual Input: Applying InputClass "system-keyboard"
[    30.917] (II) Using input driver 'libinput' for 'LogiOps Virtual Input'
[    30.918] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 70 paused 0
[    30.918] (**) LogiOps Virtual Input: always reports core events
[    30.918] (**) Option "Device" "/dev/input/event12"
[    30.918] (II) event12 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[    30.918] (II) event12 - LogiOps Virtual Input: device is a keyboard
[    30.919] (II) event12 - LogiOps Virtual Input: device removed
[    30.919] (**) Option "config_info" "udev:/sys/devices/virtual/input/input28/event12"
[    30.919] (II) XINPUT: Adding extended input device "LogiOps Virtual Input" (type: KEYBOARD, id 13)
[    30.919] (**) Option "xkb_layout" "eu"
[    30.920] (II) event12 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[    30.920] (II) event12 - LogiOps Virtual Input: device is a keyboard
[    30.953] (II) config/udev: Adding input device headset (AVRCP) (/dev/input/event15)
[    30.953] (**) headset (AVRCP): Applying InputClass "libinput keyboard catchall"
[    30.953] (**) headset (AVRCP): Applying InputClass "system-keyboard"
[    30.953] (II) Using input driver 'libinput' for 'headset (AVRCP)'
[    30.954] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 78 paused 0
[    30.954] (**) headset (AVRCP): always reports core events
[    30.954] (**) Option "Device" "/dev/input/event15"
[    30.955] (II) event15 - headset (AVRCP): is tagged by udev as: Keyboard
[    30.955] (II) event15 - headset (AVRCP): device is a keyboard
[    30.955] (II) event15 - headset (AVRCP): device removed
[    30.955] (**) Option "config_info" "udev:/sys/devices/virtual/input/input29/event15"
[    30.955] (II) XINPUT: Adding extended input device "headset (AVRCP)" (type: KEYBOARD, id 17)
[    30.955] (**) Option "xkb_layout" "eu"
[    30.956] (II) event15 - headset (AVRCP): is tagged by udev as: Keyboard
[    30.956] (II) event15 - headset (AVRCP): device is a keyboard
[    79.397] (II) event13 - Topre Corporation HHKB Professional: device removed
[    79.405] (II) config/udev: removing device Topre Corporation HHKB Professional
[    79.405] (**) Option "fd" "72"
[    79.419] (II) UnloadModule: "libinput"
[    79.419] (II) systemd-logind: releasing fd for 13:77
[    79.908] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    79.908] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    79.908] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    79.915] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    79.915] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    79.915] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    79.937] (II) event14 - Logitech MX Master 3: device removed
[    79.970] (II) config/udev: removing device Logitech MX Master 3
[    79.970] (**) Option "fd" "74"
[    79.986] (II) UnloadModule: "libinput"
[    79.986] (II) systemd-logind: not releasing fd for 13:78, still in use
[    79.986] (II) config/udev: removing device Logitech MX Master 3
[    79.986] (**) Option "fd" "74"
[    79.991] (II) UnloadModule: "libinput"
[    79.991] (II) systemd-logind: releasing fd for 13:78
[    80.389] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter
[    80.408] (II) AMDGPU(0): Allocate new frame buffer 1920x1080
[    80.409] (II) AMDGPU(0):  => pitch 7680 bytes
[    81.282] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    81.282] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    81.282] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    81.366] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    81.366] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    81.366] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    96.300] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    96.300] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    96.300] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    96.301] (II) config/udev: removing GPU device /sys/devices/platform/evdi.1/drm/card2 /dev/dri/card2
[    96.301] (II) config/udev: Adding drm device (/dev/dri/card2)
[    96.301] (II) xfree86: Adding drm device (/dev/dri/card2)
[    96.301] (II) Platform probe for /sys/devices/platform/evdi.1/drm/card2
[    96.302] (II) systemd-logind: got fd for /dev/dri/card2 226:2 fd 76 paused 0
[    96.302] (II) LoadModule: "modesetting"
[    96.302] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    96.302] (II) Module modesetting: vendor="X.Org Foundation"
[    96.302] 	compiled for 1.21.1.8, module version = 1.21.1
[    96.302] 	Module class: X.Org Video Driver
[    96.302] 	ABI class: X.Org Video Driver, version 25.2
[    96.302] (II) UnloadModule: "modesetting"
[    96.302] (II) Unloading modesetting
[    96.302] (II) Failed to load module "modesetting" (already loaded, 0)
[    96.302] (II) modeset(G1): using drv /dev/dri/card2
[    96.302] (==) modeset(G1): Depth 24, (==) framebuffer bpp 32
[    96.302] (II) Applying OutputClass "DisplayLink" options to /dev/dri/card2
[    96.302] (**) modeset(G1): Option "AccelMethod" "none"
[    96.302] (==) modeset(G1): RGB weight 888
[    96.302] (==) modeset(G1): Default visual is TrueColor
[    96.302] (**) modeset(G1): glamor disabled
[    96.302] (II) modeset(G1): ShadowFB: preferred NO, enabled NO
[    96.302] (II) modeset(G1): Output DVI-I-2-2 has no monitor section
[    96.302] (==) modeset(G1): Using gamma correction (1.0, 1.0, 1.0)
[    96.302] (**) modeset(G1): Display dimensions: (310, 170) mm
[    96.302] (**) modeset(G1): DPI set to (83, 114)
[    96.302] (II) Loading sub module "fb"
[    96.302] (II) LoadModule: "fb"
[    96.302] (II) Module "fb" already built-in
[    96.302] (==) modeset(G1): Backing store enabled
[    96.302] (==) modeset(G1): Silken mouse enabled
[    96.302] (II) modeset(G1): Initializing kms color map for depth 24, 8 bpc.
[    96.302] (==) modeset(G1): DPMS enabled
[    96.304] (II) modeset(G1): Damage tracking initialized
[    96.308] xf86: found device 3
[    96.448] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    96.448] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    96.448] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    96.451] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    96.451] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    96.451] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    96.512] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    96.512] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    96.512] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    96.679] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    96.679] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    96.679] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    96.682] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    96.682] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    96.682] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    96.739] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    96.739] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    96.739] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    97.469] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    97.469] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    97.469] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    97.473] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    97.473] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    97.473] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    97.533] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[    97.533] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    97.533] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    98.077] (II) config/udev: Adding input device Topre Corporation HHKB Professional (/dev/input/event13)
[    98.077] (**) Topre Corporation HHKB Professional: Applying InputClass "libinput keyboard catchall"
[    98.077] (**) Topre Corporation HHKB Professional: Applying InputClass "system-keyboard"
[    98.077] (II) Using input driver 'libinput' for 'Topre Corporation HHKB Professional'
[    98.078] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 79 paused 0
[    98.078] (**) Topre Corporation HHKB Professional: always reports core events
[    98.078] (**) Option "Device" "/dev/input/event13"
[    98.081] (II) event13 - Topre Corporation HHKB Professional: is tagged by udev as: Keyboard
[    98.081] (II) event13 - Topre Corporation HHKB Professional: device is a keyboard
[    98.082] (II) event13 - Topre Corporation HHKB Professional: device removed
[    98.082] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3.1/1-2.4.3.1:1.0/0003:0853:0100.000A/input/input30/event13"
[    98.082] (II) XINPUT: Adding extended input device "Topre Corporation HHKB Professional" (type: KEYBOARD, id 14)
[    98.082] (**) Option "xkb_layout" "eu"
[    98.086] (II) event13 - Topre Corporation HHKB Professional: is tagged by udev as: Keyboard
[    98.086] (II) event13 - Topre Corporation HHKB Professional: device is a keyboard
[    98.666] (II) config/udev: Adding input device Logitech MX Master 3 (/dev/input/mouse2)
[    98.666] (**) Logitech MX Master 3: Applying InputClass "system-keyboard"
[    98.666] (II) No input driver specified, ignoring this device.
[    98.666] (II) This device may have been added with another device file.
[    98.749] (II) config/udev: Adding input device Logitech MX Master 3 (/dev/input/event14)
[    98.749] (**) Logitech MX Master 3: Applying InputClass "libinput pointer catchall"
[    98.749] (**) Logitech MX Master 3: Applying InputClass "libinput keyboard catchall"
[    98.749] (**) Logitech MX Master 3: Applying InputClass "system-keyboard"
[    98.749] (II) Using input driver 'libinput' for 'Logitech MX Master 3'
[    98.750] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 80 paused 0
[    98.750] (**) Logitech MX Master 3: always reports core events
[    98.750] (**) Option "Device" "/dev/input/event14"
[    98.752] (II) event14 - Logitech MX Master 3: is tagged by udev as: Keyboard Mouse
[    98.752] (II) event14 - Logitech MX Master 3: device is a pointer
[    98.752] (II) event14 - Logitech MX Master 3: device is a keyboard
[    98.752] (II) event14 - Logitech MX Master 3: device removed
[    98.752] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    98.752] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    98.752] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    98.752] (II) libinput: Logitech MX Master 3: needs a virtual subdevice
[    98.752] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3.2/1-2.4.3.2:1.2/0003:046D:C52B.000D/0003:046D:4082.000F/input/input31/event14"
[    98.752] (II) XINPUT: Adding extended input device "Logitech MX Master 3" (type: MOUSE, id 15)
[    98.753] (**) Option "AccelerationScheme" "none"
[    98.754] (**) Logitech MX Master 3: (accel) selected scheme none/0
[    98.754] (**) Logitech MX Master 3: (accel) acceleration factor: 2.000
[    98.754] (**) Logitech MX Master 3: (accel) acceleration threshold: 4
[    98.756] (II) event14 - Logitech MX Master 3: is tagged by udev as: Keyboard Mouse
[    98.756] (II) event14 - Logitech MX Master 3: device is a pointer
[    98.756] (II) event14 - Logitech MX Master 3: device is a keyboard
[    98.757] (**) Logitech MX Master 3: Applying InputClass "libinput pointer catchall"
[    98.757] (**) Logitech MX Master 3: Applying InputClass "libinput keyboard catchall"
[    98.757] (**) Logitech MX Master 3: Applying InputClass "system-keyboard"
[    98.757] (II) Using input driver 'libinput' for 'Logitech MX Master 3'
[    98.757] (II) systemd-logind: returning pre-existing fd for /dev/input/event14 13:78
[    98.757] (**) Logitech MX Master 3: always reports core events
[    98.757] (**) Option "Device" "/dev/input/event14"
[    98.757] (II) libinput: Logitech MX Master 3: is a virtual subdevice
[    98.757] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    98.757] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    98.757] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[    98.757] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3.2/1-2.4.3.2:1.2/0003:046D:C52B.000D/0003:046D:4082.000F/input/input31/event14"
[    98.757] (II) XINPUT: Adding extended input device "Logitech MX Master 3" (type: KEYBOARD, id 16)
[    98.757] (**) Option "xkb_layout" "eu"
[   110.087] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[   110.087] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   110.087] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[   110.090] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[   110.090] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   110.090] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[   113.424] (II) AMDGPU(0): Allocate new frame buffer 5760x2160
[   113.425] (II) AMDGPU(0):  => pitch 23040 bytes
[   113.456] randr: falling back to unsynchronized pixmap sharing
[   185.696] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[   185.696] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   185.696] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[   185.699] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[   185.699] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   185.699] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[   185.724] (II) AMDGPU(0): Allocate new frame buffer 1920x1080
[   185.724] (II) AMDGPU(0):  => pitch 7680 bytes
[   185.777] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[   185.777] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   185.777] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[   185.877] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[   185.878] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   185.878] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[   185.890] (II) event13 - Topre Corporation HHKB Professional: device removed
[   185.893] (II) config/udev: removing device Topre Corporation HHKB Professional
[   185.893] (**) Option "fd" "79"
[   185.897] (II) UnloadModule: "libinput"
[   185.897] (II) systemd-logind: releasing fd for 13:77
[   186.393] (II) event14 - Logitech MX Master 3: device removed
[   186.396] (II) config/udev: removing device Logitech MX Master 3
[   186.396] (**) Option "fd" "80"
[   186.408] (II) UnloadModule: "libinput"
[   186.408] (II) systemd-logind: not releasing fd for 13:78, still in use
[   186.408] (II) config/udev: removing device Logitech MX Master 3
[   186.408] (**) Option "fd" "80"
[   186.412] (II) UnloadModule: "libinput"
[   186.412] (II) systemd-logind: releasing fd for 13:78
[   192.254] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[   192.254] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   192.254] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[   192.257] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[   192.257] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   192.257] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[   192.263] (II) AMDGPU(0): Allocate new frame buffer 5760x2160
[   192.264] (II) AMDGPU(0):  => pitch 23040 bytes
[   192.465] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[   192.465] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   192.465] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[   193.506] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[   193.506] (II) AMDGPU(0): Printing DDC gathered Modelines:
[   193.506] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[   193.799] (II) config/udev: Adding input device Topre Corporation HHKB Professional (/dev/input/event13)
[   193.799] (**) Topre Corporation HHKB Professional: Applying InputClass "libinput keyboard catchall"
[   193.799] (**) Topre Corporation HHKB Professional: Applying InputClass "system-keyboard"
[   193.799] (II) Using input driver 'libinput' for 'Topre Corporation HHKB Professional'
[   193.800] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 65 paused 0
[   193.800] (**) Topre Corporation HHKB Professional: always reports core events
[   193.800] (**) Option "Device" "/dev/input/event13"
[   193.801] (II) event13 - Topre Corporation HHKB Professional: is tagged by udev as: Keyboard
[   193.801] (II) event13 - Topre Corporation HHKB Professional: device is a keyboard
[   193.801] (II) event13 - Topre Corporation HHKB Professional: device removed
[   193.802] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3.1/3-1.4.3.1:1.0/0003:0853:0100.0011/input/input32/event13"
[   193.802] (II) XINPUT: Adding extended input device "Topre Corporation HHKB Professional" (type: KEYBOARD, id 14)
[   193.802] (**) Option "xkb_layout" "eu"
[   193.803] (II) event13 - Topre Corporation HHKB Professional: is tagged by udev as: Keyboard
[   193.803] (II) event13 - Topre Corporation HHKB Professional: device is a keyboard
[   194.414] (II) config/udev: Adding input device Logitech MX Master 3 (/dev/input/mouse2)
[   194.414] (**) Logitech MX Master 3: Applying InputClass "system-keyboard"
[   194.414] (II) No input driver specified, ignoring this device.
[   194.414] (II) This device may have been added with another device file.
[   194.469] (II) config/udev: Adding input device Logitech MX Master 3 (/dev/input/event14)
[   194.469] (**) Logitech MX Master 3: Applying InputClass "libinput pointer catchall"
[   194.469] (**) Logitech MX Master 3: Applying InputClass "libinput keyboard catchall"
[   194.469] (**) Logitech MX Master 3: Applying InputClass "system-keyboard"
[   194.469] (II) Using input driver 'libinput' for 'Logitech MX Master 3'
[   194.470] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 54 paused 0
[   194.470] (**) Logitech MX Master 3: always reports core events
[   194.470] (**) Option "Device" "/dev/input/event14"
[   194.472] (II) event14 - Logitech MX Master 3: is tagged by udev as: Keyboard Mouse
[   194.473] (II) event14 - Logitech MX Master 3: device is a pointer
[   194.473] (II) event14 - Logitech MX Master 3: device is a keyboard
[   194.473] (II) event14 - Logitech MX Master 3: device removed
[   194.473] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   194.473] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   194.473] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   194.473] (II) libinput: Logitech MX Master 3: needs a virtual subdevice
[   194.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3.2/3-1.4.3.2:1.2/0003:046D:C52B.0014/0003:046D:4082.0016/input/input33/event14"
[   194.473] (II) XINPUT: Adding extended input device "Logitech MX Master 3" (type: MOUSE, id 15)
[   194.474] (**) Option "AccelerationScheme" "none"
[   194.475] (**) Logitech MX Master 3: (accel) selected scheme none/0
[   194.475] (**) Logitech MX Master 3: (accel) acceleration factor: 2.000
[   194.475] (**) Logitech MX Master 3: (accel) acceleration threshold: 4
[   194.477] (II) event14 - Logitech MX Master 3: is tagged by udev as: Keyboard Mouse
[   194.477] (II) event14 - Logitech MX Master 3: device is a pointer
[   194.477] (II) event14 - Logitech MX Master 3: device is a keyboard
[   194.478] (**) Logitech MX Master 3: Applying InputClass "libinput pointer catchall"
[   194.478] (**) Logitech MX Master 3: Applying InputClass "libinput keyboard catchall"
[   194.479] (**) Logitech MX Master 3: Applying InputClass "system-keyboard"
[   194.479] (II) Using input driver 'libinput' for 'Logitech MX Master 3'
[   194.479] (II) systemd-logind: returning pre-existing fd for /dev/input/event14 13:78
[   194.479] (**) Logitech MX Master 3: always reports core events
[   194.479] (**) Option "Device" "/dev/input/event14"
[   194.479] (II) libinput: Logitech MX Master 3: is a virtual subdevice
[   194.479] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   194.479] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   194.479] (II) libinput: Logitech MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   194.479] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3.2/3-1.4.3.2:1.2/0003:046D:C52B.0014/0003:046D:4082.0016/input/input33/event14"
[   194.479] (II) XINPUT: Adding extended input device "Logitech MX Master 3" (type: KEYBOARD, id 16)
[   194.479] (**) Option "xkb_layout" "eu"
[   252.903] (II) event12 - LogiOps Virtual Input: device removed
[   252.910] (II) config/udev: removing device LogiOps Virtual Input
[   252.910] (**) Option "fd" "70"
[   252.912] (II) UnloadModule: "libinput"
[   252.912] (II) systemd-logind: releasing fd for 13:76
[   253.111] (II) config/udev: Adding input device LogiOps Virtual Input (/dev/input/event12)
[   253.111] (**) LogiOps Virtual Input: Applying InputClass "libinput keyboard catchall"
[   253.111] (**) LogiOps Virtual Input: Applying InputClass "system-keyboard"
[   253.111] (II) Using input driver 'libinput' for 'LogiOps Virtual Input'
[   253.112] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 74 paused 0
[   253.112] (**) LogiOps Virtual Input: always reports core events
[   253.112] (**) Option "Device" "/dev/input/event12"
[   253.112] (II) event12 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[   253.112] (II) event12 - LogiOps Virtual Input: device is a keyboard
[   253.113] (II) event12 - LogiOps Virtual Input: device removed
[   253.113] (**) Option "config_info" "udev:/sys/devices/virtual/input/input34/event12"
[   253.113] (II) XINPUT: Adding extended input device "LogiOps Virtual Input" (type: KEYBOARD, id 13)
[   253.113] (**) Option "xkb_layout" "eu"
[   253.114] (II) event12 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[   253.114] (II) event12 - LogiOps Virtual Input: device is a keyboard
[   255.243] (II) event12 - LogiOps Virtual Input: device removed
[   255.244] (II) config/udev: removing device LogiOps Virtual Input
[   255.244] (**) Option "fd" "74"
[   255.247] (II) UnloadModule: "libinput"
[   255.247] (II) systemd-logind: releasing fd for 13:76
[   255.317] (II) config/udev: Adding input device LogiOps Virtual Input (/dev/input/event12)
[   255.317] (**) LogiOps Virtual Input: Applying InputClass "libinput keyboard catchall"
[   255.317] (**) LogiOps Virtual Input: Applying InputClass "system-keyboard"
[   255.317] (II) Using input driver 'libinput' for 'LogiOps Virtual Input'
[   255.367] (EE) systemd-logind: failed to take device /dev/input/event12: No such device
[   255.367] (**) LogiOps Virtual Input: always reports core events
[   255.367] (**) Option "Device" "/dev/input/event12"
[   255.367] (EE) client bug: Invalid path /dev/input/event12
[   255.367] (EE) libinput: LogiOps Virtual Input: Failed to create a device for /dev/input/event12
[   255.367] (EE) PreInit returned 2 for "LogiOps Virtual Input"
[   255.367] (II) UnloadModule: "libinput"
[   255.474] (II) config/udev: Adding input device LogiOps Virtual Input (/dev/input/event12)
[   255.474] (**) LogiOps Virtual Input: Applying InputClass "libinput keyboard catchall"
[   255.474] (**) LogiOps Virtual Input: Applying InputClass "system-keyboard"
[   255.474] (II) Using input driver 'libinput' for 'LogiOps Virtual Input'
[   255.475] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 70 paused 0
[   255.475] (**) LogiOps Virtual Input: always reports core events
[   255.475] (**) Option "Device" "/dev/input/event12"
[   255.476] (II) event12 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[   255.476] (II) event12 - LogiOps Virtual Input: device is a keyboard
[   255.477] (II) event12 - LogiOps Virtual Input: device removed
[   255.477] (**) Option "config_info" "udev:/sys/devices/virtual/input/input36/event12"
[   255.477] (II) XINPUT: Adding extended input device "LogiOps Virtual Input" (type: KEYBOARD, id 13)
[   255.477] (**) Option "xkb_layout" "eu"
[   255.478] (II) event12 - LogiOps Virtual Input: is tagged by udev as: Keyboard
[   255.478] (II) event12 - LogiOps Virtual Input: device is a keyboard
[   921.376] (II) event15 - headset (AVRCP): device removed
[   921.380] (II) config/udev: removing device headset (AVRCP)
[   921.380] (**) Option "fd" "78"
[   921.382] (II) UnloadModule: "libinput"
[   921.383] (II) systemd-logind: releasing fd for 13:79
[   929.204] (II) config/udev: Adding input device headset (AVRCP) (/dev/input/event15)
[   929.204] (**) headset (AVRCP): Applying InputClass "libinput keyboard catchall"
[   929.204] (**) headset (AVRCP): Applying InputClass "system-keyboard"
[   929.204] (II) Using input driver 'libinput' for 'headset (AVRCP)'
[   929.205] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 80 paused 0
[   929.205] (**) headset (AVRCP): always reports core events
[   929.205] (**) Option "Device" "/dev/input/event15"
[   929.205] (II) event15 - headset (AVRCP): is tagged by udev as: Keyboard
[   929.206] (II) event15 - headset (AVRCP): device is a keyboard
[   929.206] (II) event15 - headset (AVRCP): device removed
[   929.206] (**) Option "config_info" "udev:/sys/devices/virtual/input/input37/event15"
[   929.206] (II) XINPUT: Adding extended input device "headset (AVRCP)" (type: KEYBOARD, id 17)
[   929.206] (**) Option "xkb_layout" "eu"
[   929.207] (II) event15 - headset (AVRCP): is tagged by udev as: Keyboard
[   929.207] (II) event15 - headset (AVRCP): device is a keyboard
[  1613.185] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  1613.185] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  1613.185] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[  1613.187] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  1613.187] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  1613.187] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[  1648.974] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  1648.974] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  1648.974] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[  1648.976] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  1648.976] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  1648.976] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[  1655.433] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter
[  1655.436] (II) AMDGPU(0): Allocate new frame buffer 3840x2160
[  1655.437] (II) AMDGPU(0):  => pitch 15360 bytes
[  1669.208] (II) AMDGPU(0): Allocate new frame buffer 1920x1080
[  1669.208] (II) AMDGPU(0):  => pitch 7680 bytes
[  1677.868] (II) AMDGPU(0): Allocate new frame buffer 5760x2160
[  1677.868] (II) AMDGPU(0):  => pitch 23040 bytes
[  1687.496] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter
[  1687.498] (II) AMDGPU(0): Allocate new frame buffer 1920x1080
[  1687.498] (II) AMDGPU(0):  => pitch 7680 bytes
[  1699.077] (II) AMDGPU(0): Allocate new frame buffer 5760x2160
[  1699.077] (II) AMDGPU(0):  => pitch 23040 bytes
[  1856.315] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  1856.315] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  1856.315] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[  1856.318] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  1856.318] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  1856.318] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[  2364.688] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  2364.688] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2364.689] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[  2364.691] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  2364.691] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2364.691] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[  2364.695] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  2364.695] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2364.695] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[  2436.961] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  2436.961] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2436.961] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[  2436.964] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  2436.964] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2436.964] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[  2436.973] (II) AMDGPU(0): EDID vendor "CMN", prod id 5333
[  2436.973] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  2436.973] (II) AMDGPU(0): Modeline "1920x1080"x0.0  152.84  1920 2000 2060 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)

seth · 2023-05-04 20:26:35

[2023-05-04T20:46:42+0200] [ALPM-SCRIPTLET] ldconfig: /usr/lib/libevdi.so.1 is not a symbolic link

ls -l /usr/lib/libevdi.so*

There're two kernels, does it matter which one you boot?

I use xcfce4 with "Enable display compositing" set to active.

Disable the compositor and monitor the impact.

Presently, no modesetting option is relevant: In general try to remove xf86-video-amdgpu and then the relevant one is the on I linked - "SWcursor" (but the amdgpu driver supports the same Option)

djenis · 2023-05-04 20:43:09

I definitely don't need two kernels, so I ran:

sudo pacman -Rns linux-hardened usbctl

Interestingly, after rebooting my video works great again (I didn't change anything else)... Do you think the problem was due to me having two kernels?

I'll mark the issue as solved for now, thanks!

seth · 2023-05-04 20:45:52

Do you think the problem was due to me having two kernels?

No.
If anything, one kernel would have behaved good and the other one not and you randomly booted one or the other.

More likely some race condition then.
If itturns again, restart X11.

djenis · 2023-05-04 20:54:03

I noticed a pattern: if I boot (or start X) with the USB-C cable plugged it works. If I plug the cable after starting X, the video hangs. So I don't think it has something to do with package versions.

My bad, I didnt' read the Arch Wiki: https://wiki.archlinux.org/title/Displa … leshooting

3.9 DisplayLink is not working when usb hot plugged

To be able to use DisplayLink monitors, its usb cable should be attached to laptop during boot time. Otherwise it can behave like they are available and mouse can be moved there, but its picture is frozen, even with correct configuration (see workaround 1). If it was not attached at boot time, attach it and reboot.

Last edited by djenis (2023-05-04 21:03:38)

Arch Linux

#1 2023-05-04 19:36:57

[SOLVED] DisplayLink: video hangs when moving mouse

#2 2023-05-04 19:52:26

Re: [SOLVED] DisplayLink: video hangs when moving mouse

#3 2023-05-04 20:13:00

Re: [SOLVED] DisplayLink: video hangs when moving mouse

#4 2023-05-04 20:26:35

Re: [SOLVED] DisplayLink: video hangs when moving mouse

#5 2023-05-04 20:43:09

Re: [SOLVED] DisplayLink: video hangs when moving mouse

#6 2023-05-04 20:45:52

Re: [SOLVED] DisplayLink: video hangs when moving mouse

#7 2023-05-04 20:54:03

Re: [SOLVED] DisplayLink: video hangs when moving mouse

Board footer