You are not logged in.
- Topics: Active | Unanswered
#1 2023-05-05 11:29:57
- karlospv94
- Member
- Registered: 2016-10-12
- Posts: 101
Annoying message about monitors when laptop heats up
Hi, I have been facing this since I have Plasma. It also happens when no monitor is connected. The focus is also set to that annoying window and it starts appearing in a loop until the laptop freezes a bit.
https://pasteboard.co/Ib6veLSPj8GC.png
I'm using Plasma 5.27.4 and Kernel 6.2.12-arch1-1. This is the output of xrandr:
Screen 0: minimum 320 x 200, current 4480 x 1440, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1920x1080 240.00*+ 60.01 59.97 59.96 60.00 59.93
1680x1050 59.95 59.88
1400x1050 74.76 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 85.02 75.02 60.02
1400x900 59.96 59.88
1280x960 85.00 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1152x864 75.00
1280x720 60.00 59.99 59.86 59.74
1024x768 85.00 75.05 60.04 85.00 75.03 70.07 60.00
1024x768i 86.96
960x720 85.00 75.00 60.00
928x696 75.00 60.05
896x672 75.05 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
832x624 74.55
960x540 59.96 59.99 59.63 59.82
800x600 85.00 75.00 70.00 65.00 60.00 85.14 72.19 75.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 74.76 59.98
800x450 59.95 59.82
640x512 85.02 75.02 60.02
700x450 59.96 59.88
640x480 85.09 60.00 85.01 72.81 75.00 59.94
720x405 59.51 58.99
720x400 85.04
684x384 59.88 59.85
640x400 59.88 59.98 85.08
576x432 75.00
640x360 59.86 59.83 59.84 59.32
640x350 85.08
512x384 85.00 75.03 70.07 60.00
512x384i 87.06
512x288 60.00 59.92
416x312 74.66
480x270 59.63 59.82
400x300 85.27 72.19 75.12 60.32 56.34
432x243 59.92 59.57
320x240 85.18 72.81 75.00 60.05
360x202 59.51 59.13
360x200 85.04
320x200 85.27
320x180 59.84 59.32
320x175 85.27
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 connected 2560x1440+1920+0 (normal left inverted right x axis y axis) 600mm x 340mm
3840x2160 60.00 + 30.00
2560x1440 59.95*
1920x1080 60.00 59.94
1600x900 60.00
1280x1024 60.02
1280x800 59.81
1152x864 59.97
1280x720 60.00 59.94
1024x768 60.00
800x600 60.32
720x480 60.00 59.94
640x480 60.00 59.94 I'm not sure about how to manage this, but I can't work confortable this way. Any help to fix this would be appreciated
Last edited by karlospv94 (2023-05-05 11:34:33)
Offline
#2 2023-05-05 11:48:16
- karlospv94
- Member
- Registered: 2016-10-12
- Posts: 101
Re: Annoying message about monitors when laptop heats up
Not sure if this could be related, since it has appeared in journalctl when the panel has appeared:
may 05 13:45:41 granadillo kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 510
may 05 13:45:41 granadillo kernel:
may 05 13:45:41 granadillo kernel: nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
may 05 13:45:41 granadillo kernel: NVRM: The NVIDIA GPU 0000:01:00.0
NVRM: (PCI ID: 10de:2520) installed in this system has
NVRM: fallen off the bus and is not responding to commands.
may 05 13:45:41 granadillo kernel: nvidia: probe of 0000:01:00.0 failed with error -1
may 05 13:45:41 granadillo kernel: NVRM: The NVIDIA probe routine failed for 1 device(s).
may 05 13:45:41 granadillo kernel: NVRM: None of the NVIDIA devices were initialized.
may 05 13:45:41 granadillo kernel: nvidia-nvlink: Unregistered Nvlink Core, major device number 510
may 05 13:45:41 granadillo (udev-worker)[449775]: nvidia: Process '/usr/bin/bash -c '/usr/bin/mknod -Z -m 666 /dev/nvidiactl c $(grep nvidia-frontend /proc/devices | cut -d \ -f 1) 255'' failed with exit code 1.
may 05 13:45:41 granadillo (udev-worker)[449775]: nvidia: Process '/usr/bin/bash -c '/usr/bin/mknod -Z -m 666 /dev/nvidiactl c $(grep nvidia-frontend /proc/devices | cut -d \ -f 1) 255'' failed with exit code 1.Offline
#3 2023-05-05 14:49:48
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,337
Re: Annoying message about monitors when laptop heats up
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
This is most likely a hybrid system and the nvidia GPU somehow fails (possibly powersaving/drain related)
The window you get is likely from the kscreen daemon, so you could try to deactivate that, but I'd focus on what happens to the GPU.
Please also post your complete system journal for an affected boot, eg:
sudo journalctl -b -1 | curl -F 'file=@-' 0x0.stfor the previous one.
Offline
#4 2023-05-05 15:17:31
- karlospv94
- Member
- Registered: 2016-10-12
- Posts: 101
Re: Annoying message about monitors when laptop heats up
seth wrote:
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
This is most likely a hybrid system and the nvidia GPU somehow fails (possibly powersaving/drain related)
The window you get is likely from the kscreen daemon, so you could try to deactivate that, but I'd focus on what happens to the GPU.
Please also post your complete system journal for an affected boot, eg:sudo journalctl -b -1 | curl -F 'file=@-' 0x0.stfor the previous one.
You are right, this is an hybrid system. Ideally I would like to completely disable the Nvidia GPU since I don't use it at all. That's why I have bumbleblee and other things that I read at some point to disable the gpu. Anyway, I see that sometimes it enables, for example when I restart from an hibernation so I need to go to `powertop` and disable it from there.
This is the output for Xorg.0.log:
[ 5.013] (--) Log file renamed from "/var/log/Xorg.pid-901.log" to "/var/log/Xorg.0.log"
[ 5.013]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 5.013] Current Operating System: Linux granadillo 6.2.12-arch1-1 #1 SMP PREEMPT_DYNAMIC Thu, 20 Apr 2023 16:11:55 +0000 x86_64
[ 5.013] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=06ffa975-695d-4d83-a8c6-3f436d201402 rw resume=UUID=06ffa975-695d-4d83-a8c6-3f436d201402 resume_offset=4403200
[ 5.013]
[ 5.013] Current version of pixman: 0.42.2
[ 5.013] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.013] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.013] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 25 09:47:43 2023
[ 5.014] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.014] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.015] (==) No Layout section. Using the first Screen section.
[ 5.015] (==) No screen section available. Using defaults.
[ 5.015] (**) |-->Screen "Default Screen Section" (0)
[ 5.015] (**) | |-->Monitor "<default monitor>"
[ 5.015] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.015] (==) Automatically adding devices
[ 5.015] (==) Automatically enabling devices
[ 5.015] (==) Automatically adding GPU devices
[ 5.015] (==) Automatically binding GPU devices
[ 5.015] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5.015] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 5.015] Entry deleted from font path.
[ 5.015] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 5.016] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 5.016] Entry deleted from font path.
[ 5.016] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 5.016] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 5.016] Entry deleted from font path.
[ 5.016] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 5.016] Entry deleted from font path.
[ 5.016] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 5.016] Entry deleted from font path.
[ 5.016] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 5.016] Entry deleted from font path.
[ 5.016] (==) FontPath set to:
[ 5.016] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.016] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.016] (II) Module ABI versions:
[ 5.016] X.Org ANSI C Emulation: 0.4
[ 5.016] X.Org Video Driver: 25.2
[ 5.016] X.Org XInput driver : 24.4
[ 5.016] X.Org Server Extension : 10.0
[ 5.016] (++) using VT number 1
[ 5.016] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5.017] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.017] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 5.051] (--) PCI:*(0@0:2:0) 8086:9a60:1462:12f5 rev 1, Mem @ 0x622c000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 5.051] (--) PCI: (1@0:0:0) 10de:2520:1462:12f5 rev 161, Mem @ 0x83000000/16777216, 0x6000000000/8589934592, 0x6200000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 5.051] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5.051] (II) LoadModule: "glx"
[ 5.051] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.056] (II) Module glx: vendor="X.Org Foundation"
[ 5.056] compiled for 1.21.1.8, module version = 1.0.0
[ 5.056] ABI class: X.Org Server Extension, version 10.0
[ 5.056] (==) Matched intel as autoconfigured driver 0
[ 5.056] (==) Matched modesetting as autoconfigured driver 1
[ 5.056] (==) Matched fbdev as autoconfigured driver 2
[ 5.056] (==) Matched vesa as autoconfigured driver 3
[ 5.056] (==) Assigned the driver to the xf86ConfigLayout
[ 5.056] (II) LoadModule: "intel"
[ 5.057] (WW) Warning, couldn't open module intel
[ 5.057] (EE) Failed to load module "intel" (module does not exist, 0)
[ 5.057] (II) LoadModule: "modesetting"
[ 5.057] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.058] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.058] compiled for 1.21.1.8, module version = 1.21.1
[ 5.058] Module class: X.Org Video Driver
[ 5.058] ABI class: X.Org Video Driver, version 25.2
[ 5.058] (II) LoadModule: "fbdev"
[ 5.058] (WW) Warning, couldn't open module fbdev
[ 5.058] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5.058] (II) LoadModule: "vesa"
[ 5.058] (WW) Warning, couldn't open module vesa
[ 5.058] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 5.058] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.066] (II) modeset(0): using drv /dev/dri/card0
[ 5.066] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.066] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 5.066] (==) modeset(0): RGB weight 888
[ 5.066] (==) modeset(0): Default visual is TrueColor
[ 5.066] (II) Loading sub module "glamoregl"
[ 5.066] (II) LoadModule: "glamoregl"
[ 5.066] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.070] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.070] compiled for 1.21.1.8, module version = 1.0.1
[ 5.070] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.719] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics (TGL GT1)
[ 5.719] (II) modeset(0): glamor initialized
[ 5.719] (==) modeset(0): VariableRefresh: disabled
[ 5.719] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 5.720] (II) modeset(0): Output eDP-1 has no monitor section
[ 5.721] (II) modeset(0): Output DP-1 has no monitor section
[ 5.748] (II) modeset(0): Output DP-2 has no monitor section
[ 5.750] (II) modeset(0): EDID for output eDP-1
[ 5.750] (II) modeset(0): Manufacturer: SHP Model: 155d Serial#: 0
[ 5.750] (II) modeset(0): Year: 2021 Week: 23
[ 5.750] (II) modeset(0): EDID Version: 1.4
[ 5.750] (II) modeset(0): Digital Display Input
[ 5.750] (II) modeset(0): 8 bits per channel
[ 5.750] (II) modeset(0): Digital interface is DisplayPort
[ 5.750] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 5.750] (II) modeset(0): Gamma: 2.20
[ 5.750] (II) modeset(0): No DPMS capabilities specified
[ 5.750] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 5.750] (II) modeset(0): Default color space is primary color space
[ 5.750] (II) modeset(0): First detailed timing is preferred mode
[ 5.750] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 5.750] (II) modeset(0): Display is continuous-frequency
[ 5.750] (II) modeset(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 5.750] (II) modeset(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 5.750] (II) modeset(0): Manufacturer's mask: 0
[ 5.750] (II) modeset(0): Supported detailed timing:
[ 5.750] (II) modeset(0): clock: 606.5 MHz Image Size: 344 x 194 mm
[ 5.750] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 5.750] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1215 v_border: 0
[ 5.750] (II) modeset(0): Supported detailed timing:
[ 5.750] (II) modeset(0): clock: 151.6 MHz Image Size: 344 x 194 mm
[ 5.750] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 5.750] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1215 v_border: 0
[ 5.750] (II) modeset(0): Monitor name: LQ156M1JW03
[ 5.750] (II) modeset(0): EDID (in hex):
[ 5.750] (II) modeset(0): 00ffffffffffff004d105d1500000000
[ 5.750] (II) modeset(0): 171f0104a522137807de50a3544c9926
[ 5.750] (II) modeset(0): 0f505400000001010101010101010101
[ 5.750] (II) modeset(0): 010101010101edec80a0703887403020
[ 5.750] (II) modeset(0): 350058c2100000183c3b80a070388740
[ 5.750] (II) modeset(0): 3020350058c210000018000000100000
[ 5.750] (II) modeset(0): 000000000000000000000000000000fc
[ 5.750] (II) modeset(0): 004c513135364d314a5730330a2000c3
[ 5.750] (II) modeset(0): Printing probed modes for output eDP-1
[ 5.750] (II) modeset(0): Modeline "1920x1080"x240.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[ 5.750] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 5.750] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 5.750] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 5.750] (II) modeset(0): Modeline "1920x1080"x60.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[ 5.750] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 5.750] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 5.750] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 5.750] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 5.750] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x768"x170.0 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync (137.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x768"x150.1 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x768i"x43.5 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "960x720"x170.0 170.68 960 1036 1144 1328 720 720 722 756 doublescan -hsync +vsync (128.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "960x720"x150.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "928x696"x150.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 5.750] (II) modeset(0): Modeline "896x672"x150.1 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 5.750] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 5.750] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 5.750] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x600"x170.0 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x600"x150.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x600"x140.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x600"x130.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 5.750] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 5.750] (II) modeset(0): Modeline "700x525"x149.5 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x512"x170.0 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x512"x150.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x480"x170.2 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 5.750] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 5.750] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "576x432"x150.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 5.750] (II) modeset(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "512x384"x170.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "512x384"x150.1 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 5.750] (II) modeset(0): Modeline "512x384"x140.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 5.750] (II) modeset(0): Modeline "512x384i"x87.1 22.45 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "416x312"x149.3 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "400x300"x170.5 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "400x300"x144.4 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 5.750] (II) modeset(0): Modeline "400x300"x150.2 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 5.750] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 5.750] (II) modeset(0): Modeline "320x240"x170.4 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz d)
[ 5.750] (II) modeset(0): Modeline "320x240"x145.6 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "320x240"x150.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 5.750] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 5.750] (II) modeset(0): Modeline "360x200"x170.1 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "320x200"x170.5 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz d)
[ 5.750] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 5.750] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 5.750] (II) modeset(0): Modeline "320x175"x170.5 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz d)
[ 5.751] (II) modeset(0): EDID for output DP-1
[ 5.778] (II) modeset(0): EDID for output DP-2
[ 5.778] (II) modeset(0): Manufacturer: GSM Model: 5b09 Serial#: 95431
[ 5.778] (II) modeset(0): Year: 2017 Week: 4
[ 5.778] (II) modeset(0): EDID Version: 1.4
[ 5.778] (II) modeset(0): Digital Display Input
[ 5.778] (II) modeset(0): 10 bits per channel
[ 5.778] (II) modeset(0): Digital interface is DisplayPort
[ 5.778] (II) modeset(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 5.778] (II) modeset(0): Gamma: 2.20
[ 5.778] (II) modeset(0): DPMS capabilities: StandBy
[ 5.778] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 5.778] (II) modeset(0): Default color space is primary color space
[ 5.778] (II) modeset(0): First detailed timing is preferred mode
[ 5.778] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 5.778] (II) modeset(0): redX: 0.652 redY: 0.335 greenX: 0.305 greenY: 0.637
[ 5.778] (II) modeset(0): blueX: 0.148 blueY: 0.062 whiteX: 0.313 whiteY: 0.329
[ 5.778] (II) modeset(0): Supported established timings:
[ 5.778] (II) modeset(0): 640x480@60Hz
[ 5.778] (II) modeset(0): 800x600@60Hz
[ 5.778] (II) modeset(0): 1024x768@60Hz
[ 5.778] (II) modeset(0): Manufacturer's mask: 0
[ 5.778] (II) modeset(0): Supported standard timings:
[ 5.778] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 60 vid: 16497
[ 5.778] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 5.778] (II) modeset(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 5.778] (II) modeset(0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 5.778] (II) modeset(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 5.778] (II) modeset(0): #5: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 5.778] (II) modeset(0): Supported detailed timing:
[ 5.778] (II) modeset(0): clock: 533.2 MHz Image Size: 600 x 340 mm
[ 5.778] (II) modeset(0): h_active: 3840 h_sync: 3888 h_sync_end 3920 h_blank_end 4000 h_border: 0
[ 5.778] (II) modeset(0): v_active: 2160 v_sync: 2214 v_sync_end 2219 v_blanking: 2222 v_border: 0
[ 5.778] (II) modeset(0): Supported detailed timing:
[ 5.778] (II) modeset(0): clock: 266.6 MHz Image Size: 600 x 340 mm
[ 5.778] (II) modeset(0): h_active: 3840 h_sync: 3848 h_sync_end 3992 h_blank_end 4000 h_border: 0
[ 5.778] (II) modeset(0): v_active: 2160 v_sync: 2214 v_sync_end 2219 v_blanking: 2222 v_border: 0
[ 5.778] (II) modeset(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 135 kHz, PixClock max 565 MHz
[ 5.778] (II) modeset(0): Monitor name: LG Ultra HD
[ 5.778] (II) modeset(0): Supported detailed timing:
[ 5.778] (II) modeset(0): clock: 148.5 MHz Image Size: 600 x 340 mm
[ 5.778] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 5.778] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 5.778] (II) modeset(0): Supported detailed timing:
[ 5.778] (II) modeset(0): clock: 241.5 MHz Image Size: 600 x 340 mm
[ 5.778] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 5.778] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 5.778] (II) modeset(0): Number of EDID sections to follow: 1
[ 5.778] (II) modeset(0): EDID (in hex):
[ 5.778] (II) modeset(0): 00ffffffffffff001e6d095bc7740100
[ 5.778] (II) modeset(0): 041b0104b53c22789e3035a7554ea326
[ 5.778] (II) modeset(0): 0f50542108007140818081c0a9c0d1c0
[ 5.778] (II) modeset(0): 8100010101014dd000a0f0703e803020
[ 5.778] (II) modeset(0): 650c58542100001a286800a0f0703e80
[ 5.778] (II) modeset(0): 0890650c58542100001a000000fd0038
[ 5.778] (II) modeset(0): 3d1e8738000a202020202020000000fc
[ 5.778] (II) modeset(0): 004c4720556c7472612048440a200160
[ 5.778] (II) modeset(0): 02031171449004030123090707830100
[ 5.778] (II) modeset(0): 00023a801871382d40582c4500585421
[ 5.778] (II) modeset(0): 00001e565e00a0a0a029503020350058
[ 5.778] (II) modeset(0): 542100001a0000000000000000000000
[ 5.778] (II) modeset(0): 00000000000000000000000000000000
[ 5.778] (II) modeset(0): 00000000000000000000000000000000
[ 5.778] (II) modeset(0): 00000000000000000000000000000000
[ 5.778] (II) modeset(0): 000000000000000000000000000000c8
[ 5.778] (II) modeset(0): Printing probed modes for output DP-2
[ 5.778] (II) modeset(0): Modeline "3840x2160"x60.0 533.25 3840 3888 3920 4000 2160 2214 2219 2222 +hsync -vsync (133.3 kHz eP)
[ 5.778] (II) modeset(0): Modeline "3840x2160"x30.0 266.64 3840 3848 3992 4000 2160 2214 2219 2222 +hsync -vsync (66.7 kHz e)
[ 5.778] (II) modeset(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[ 5.778] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 5.778] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 5.778] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 5.778] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 5.778] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 5.778] (II) modeset(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 5.778] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 5.778] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 5.778] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 5.778] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5.778] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 5.778] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 5.778] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.778] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.778] (II) modeset(0): Output eDP-1 connected
[ 5.778] (II) modeset(0): Output DP-1 disconnected
[ 5.778] (II) modeset(0): Output DP-2 connected
[ 5.778] (II) modeset(0): Using spanning desktop for initial modes
[ 5.778] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 5.778] (II) modeset(0): Output DP-2 using initial mode 3840x2160 +1920+0
[ 5.778] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.778] (==) modeset(0): DPI set to (96, 96)
[ 5.778] (II) Loading sub module "fb"
[ 5.778] (II) LoadModule: "fb"
[ 5.778] (II) Module "fb" already built-in
[ 5.794] (==) modeset(0): Backing store enabled
[ 5.794] (==) modeset(0): Silken mouse enabled
[ 5.916] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 5.917] (==) modeset(0): DPMS enabled
[ 5.917] (II) modeset(0): [DRI2] Setup complete
[ 5.917] (II) modeset(0): [DRI2] DRI driver: iris
[ 5.917] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 5.917] (II) Initializing extension Generic Event Extension
[ 5.917] (II) Initializing extension SHAPE
[ 5.917] (II) Initializing extension MIT-SHM
[ 5.918] (II) Initializing extension XInputExtension
[ 5.918] (II) Initializing extension XTEST
[ 5.918] (II) Initializing extension BIG-REQUESTS
[ 5.919] (II) Initializing extension SYNC
[ 5.919] (II) Initializing extension XKEYBOARD
[ 5.919] (II) Initializing extension XC-MISC
[ 5.919] (II) Initializing extension SECURITY
[ 5.920] (II) Initializing extension XFIXES
[ 5.920] (II) Initializing extension RENDER
[ 5.920] (II) Initializing extension RANDR
[ 5.921] (II) Initializing extension COMPOSITE
[ 5.921] (II) Initializing extension DAMAGE
[ 5.921] (II) Initializing extension MIT-SCREEN-SAVER
[ 5.922] (II) Initializing extension DOUBLE-BUFFER
[ 5.922] (II) Initializing extension RECORD
[ 5.922] (II) Initializing extension DPMS
[ 5.922] (II) Initializing extension Present
[ 5.923] (II) Initializing extension DRI3
[ 5.923] (II) Initializing extension X-Resource
[ 5.923] (II) Initializing extension XVideo
[ 5.923] (II) Initializing extension XVideo-MotionCompensation
[ 5.923] (II) Initializing extension GLX
[ 5.939] (II) AIGLX: Loaded and initialized iris
[ 5.939] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.939] (II) Initializing extension XFree86-VidModeExtension
[ 5.939] (II) Initializing extension XFree86-DGA
[ 5.939] (II) Initializing extension XFree86-DRI
[ 5.939] (II) Initializing extension DRI2
[ 5.939] (II) modeset(0): Damage tracking initialized
[ 5.939] (II) modeset(0): Setting screen physical size to 1524 x 571
[ 5.997] (II) config/udev: Adding input device Video Bus (/dev/input/event22)
[ 5.997] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.997] (**) Video Bus: Applying InputClass "system-keyboard"
[ 5.997] (II) LoadModule: "libinput"
[ 5.997] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 6.000] (II) Module libinput: vendor="X.Org Foundation"
[ 6.000] compiled for 1.21.1.8, module version = 1.3.0
[ 6.000] Module class: X.Org XInput Driver
[ 6.000] ABI class: X.Org XInput driver, version 24.4
[ 6.000] (II) Using input driver 'libinput' for 'Video Bus'
[ 6.000] (**) Video Bus: always reports core events
[ 6.000] (**) Option "Device" "/dev/input/event22"
[ 6.002] (II) event22 - Video Bus: is tagged by udev as: Keyboard
[ 6.002] (II) event22 - Video Bus: device is a keyboard
[ 6.002] (II) event22 - Video Bus: device removed
[ 6.082] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input29/event22"
[ 6.082] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 6.082] (**) Option "xkb_model" "pc105"
[ 6.082] (**) Option "xkb_layout" "es"
[ 6.082] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.142] (II) event22 - Video Bus: is tagged by udev as: Keyboard
[ 6.142] (II) event22 - Video Bus: device is a keyboard
[ 6.143] (II) config/udev: Adding input device Video Bus (/dev/input/event21)
[ 6.143] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 6.143] (**) Video Bus: Applying InputClass "system-keyboard"
[ 6.143] (II) Using input driver 'libinput' for 'Video Bus'
[ 6.144] (**) Video Bus: always reports core events
[ 6.144] (**) Option "Device" "/dev/input/event21"
[ 6.145] (II) event21 - Video Bus: is tagged by udev as: Keyboard
[ 6.146] (II) event21 - Video Bus: device is a keyboard
[ 6.146] (II) event21 - Video Bus: device removed
[ 6.201] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input28/event21"
[ 6.202] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 6.202] (**) Option "xkb_model" "pc105"
[ 6.202] (**) Option "xkb_layout" "es"
[ 6.202] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.202] (II) event21 - Video Bus: is tagged by udev as: Keyboard
[ 6.202] (II) event21 - Video Bus: device is a keyboard
[ 6.203] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 6.203] (II) No input driver specified, ignoring this device.
[ 6.203] (II) This device may have been added with another device file.
[ 6.203] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.203] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.203] (**) Power Button: Applying InputClass "system-keyboard"
[ 6.203] (II) Using input driver 'libinput' for 'Power Button'
[ 6.203] (**) Power Button: always reports core events
[ 6.203] (**) Option "Device" "/dev/input/event2"
[ 6.203] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 6.203] (II) event2 - Power Button: device is a keyboard
[ 6.203] (II) event2 - Power Button: device removed
[ 6.232] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 6.232] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 6.232] (**) Option "xkb_model" "pc105"
[ 6.232] (**) Option "xkb_layout" "es"
[ 6.232] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.232] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 6.232] (II) event2 - Power Button: device is a keyboard
[ 6.232] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 6.232] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 6.232] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 6.232] (II) Using input driver 'libinput' for 'Sleep Button'
[ 6.232] (**) Sleep Button: always reports core events
[ 6.232] (**) Option "Device" "/dev/input/event1"
[ 6.233] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 6.233] (II) event1 - Sleep Button: device is a keyboard
[ 6.233] (II) event1 - Sleep Button: device removed
[ 6.272] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 6.272] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 6.272] (**) Option "xkb_model" "pc105"
[ 6.272] (**) Option "xkb_layout" "es"
[ 6.272] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.273] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 6.273] (II) event1 - Sleep Button: device is a keyboard
[ 6.273] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[ 6.273] (II) No input driver specified, ignoring this device.
[ 6.273] (II) This device may have been added with another device file.
[ 6.274] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[ 6.274] (II) No input driver specified, ignoring this device.
[ 6.274] (II) This device may have been added with another device file.
[ 6.274] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[ 6.274] (II) No input driver specified, ignoring this device.
[ 6.274] (II) This device may have been added with another device file.
[ 6.274] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[ 6.274] (II) No input driver specified, ignoring this device.
[ 6.274] (II) This device may have been added with another device file.
[ 6.275] (II) config/udev: Adding input device HD Camera: HD Camera (/dev/input/event20)
[ 6.275] (**) HD Camera: HD Camera: Applying InputClass "libinput keyboard catchall"
[ 6.275] (**) HD Camera: HD Camera: Applying InputClass "system-keyboard"
[ 6.275] (II) Using input driver 'libinput' for 'HD Camera: HD Camera'
[ 6.275] (**) HD Camera: HD Camera: always reports core events
[ 6.275] (**) Option "Device" "/dev/input/event20"
[ 6.277] (II) event20 - HD Camera: HD Camera: is tagged by udev as: Keyboard
[ 6.277] (II) event20 - HD Camera: HD Camera: device is a keyboard
[ 6.277] (II) event20 - HD Camera: HD Camera: device removed
[ 6.325] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/input/input27/event20"
[ 6.325] (II) XINPUT: Adding extended input device "HD Camera: HD Camera" (type: KEYBOARD, id 10)
[ 6.325] (**) Option "xkb_model" "pc105"
[ 6.325] (**) Option "xkb_layout" "es"
[ 6.325] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.328] (II) event20 - HD Camera: HD Camera: is tagged by udev as: Keyboard
[ 6.328] (II) event20 - HD Camera: HD Camera: device is a keyboard
[ 6.330] (II) config/udev: Adding input device HD Camera: IR Camera (/dev/input/event23)
[ 6.330] (**) HD Camera: IR Camera: Applying InputClass "libinput keyboard catchall"
[ 6.330] (**) HD Camera: IR Camera: Applying InputClass "system-keyboard"
[ 6.330] (II) Using input driver 'libinput' for 'HD Camera: IR Camera'
[ 6.330] (**) HD Camera: IR Camera: always reports core events
[ 6.330] (**) Option "Device" "/dev/input/event23"
[ 6.333] (II) event23 - HD Camera: IR Camera: is tagged by udev as: Keyboard
[ 6.333] (II) event23 - HD Camera: IR Camera: device is a keyboard
[ 6.333] (II) event23 - HD Camera: IR Camera: device removed
[ 6.372] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.2/input/input30/event23"
[ 6.372] (II) XINPUT: Adding extended input device "HD Camera: IR Camera" (type: KEYBOARD, id 11)
[ 6.372] (**) Option "xkb_model" "pc105"
[ 6.372] (**) Option "xkb_layout" "es"
[ 6.372] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.375] (II) event23 - HD Camera: IR Camera: is tagged by udev as: Keyboard
[ 6.375] (II) event23 - HD Camera: IR Camera: device is a keyboard
[ 6.377] (II) config/udev: Adding input device SteelSeries SteelSeries KLC (/dev/input/event15)
[ 6.377] (**) SteelSeries SteelSeries KLC: Applying InputClass "libinput keyboard catchall"
[ 6.377] (**) SteelSeries SteelSeries KLC: Applying InputClass "system-keyboard"
[ 6.377] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries KLC'
[ 6.377] (**) SteelSeries SteelSeries KLC: always reports core events
[ 6.377] (**) Option "Device" "/dev/input/event15"
[ 6.380] (II) event15 - SteelSeries SteelSeries KLC: is tagged by udev as: Keyboard
[ 6.380] (II) event15 - SteelSeries SteelSeries KLC: device is a keyboard
[ 6.380] (II) event15 - SteelSeries SteelSeries KLC: device removed
[ 6.398] (II) libinput: SteelSeries SteelSeries KLC: needs a virtual subdevice
[ 6.399] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:1038:113A.0003/input/input21/event15"
[ 6.399] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries KLC" (type: MOUSE, id 12)
[ 6.399] (**) Option "AccelerationScheme" "none"
[ 6.399] (**) SteelSeries SteelSeries KLC: (accel) selected scheme none/0
[ 6.399] (**) SteelSeries SteelSeries KLC: (accel) acceleration factor: 2.000
[ 6.399] (**) SteelSeries SteelSeries KLC: (accel) acceleration threshold: 4
[ 6.402] (II) event15 - SteelSeries SteelSeries KLC: is tagged by udev as: Keyboard
[ 6.402] (II) event15 - SteelSeries SteelSeries KLC: device is a keyboard
[ 6.404] (II) config/udev: Adding input device GENERAL WEBCAM: GENERAL WEBCAM (/dev/input/event24)
[ 6.404] (**) GENERAL WEBCAM: GENERAL WEBCAM: Applying InputClass "libinput keyboard catchall"
[ 6.404] (**) GENERAL WEBCAM: GENERAL WEBCAM: Applying InputClass "system-keyboard"
[ 6.404] (II) Using input driver 'libinput' for 'GENERAL WEBCAM: GENERAL WEBCAM'
[ 6.404] (**) GENERAL WEBCAM: GENERAL WEBCAM: always reports core events
[ 6.404] (**) Option "Device" "/dev/input/event24"
[ 6.407] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: is tagged by udev as: Keyboard
[ 6.407] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: device is a keyboard
[ 6.407] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: device removed
[ 6.442] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input31/event24"
[ 6.442] (II) XINPUT: Adding extended input device "GENERAL WEBCAM: GENERAL WEBCAM" (type: KEYBOARD, id 13)
[ 6.442] (**) Option "xkb_model" "pc105"
[ 6.442] (**) Option "xkb_layout" "es"
[ 6.442] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.445] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: is tagged by udev as: Keyboard
[ 6.445] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: device is a keyboard
[ 6.448] (II) config/udev: Adding input device Logitech K750 (/dev/input/event17)
[ 6.448] (**) Logitech K750: Applying InputClass "libinput keyboard catchall"
[ 6.448] (**) Logitech K750: Applying InputClass "system-keyboard"
[ 6.448] (II) Using input driver 'libinput' for 'Logitech K750'
[ 6.448] (**) Logitech K750: always reports core events
[ 6.448] (**) Option "Device" "/dev/input/event17"
[ 6.451] (II) event17 - Logitech K750: is tagged by udev as: Keyboard
[ 6.451] (II) event17 - Logitech K750: device is a keyboard
[ 6.452] (II) event17 - Logitech K750: device removed
[ 6.468] (II) libinput: Logitech K750: needs a virtual subdevice
[ 6.469] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0006/0003:046D:4002.0007/input/input49/event17"
[ 6.469] (II) XINPUT: Adding extended input device "Logitech K750" (type: MOUSE, id 14)
[ 6.469] (**) Option "AccelerationScheme" "none"
[ 6.469] (**) Logitech K750: (accel) selected scheme none/0
[ 6.469] (**) Logitech K750: (accel) acceleration factor: 2.000
[ 6.469] (**) Logitech K750: (accel) acceleration threshold: 4
[ 6.472] (II) event17 - Logitech K750: is tagged by udev as: Keyboard
[ 6.473] (II) event17 - Logitech K750: device is a keyboard
[ 6.475] (II) config/udev: Adding input device Logitech M325 (/dev/input/event18)
[ 6.475] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[ 6.475] (II) Using input driver 'libinput' for 'Logitech M325'
[ 6.475] (**) Logitech M325: always reports core events
[ 6.475] (**) Option "Device" "/dev/input/event18"
[ 6.478] (II) event18 - Logitech M325: is tagged by udev as: Mouse
[ 6.479] (II) event18 - Logitech M325: device set to 600 DPI
[ 6.479] (II) event18 - Logitech M325: device is a pointer
[ 6.479] (II) event18 - Logitech M325: device removed
[ 6.522] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.522] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.522] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.522] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0006/0003:046D:400A.0008/input/input50/event18"
[ 6.522] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 15)
[ 6.522] (**) Option "AccelerationScheme" "none"
[ 6.522] (**) Logitech M325: (accel) selected scheme none/0
[ 6.522] (**) Logitech M325: (accel) acceleration factor: 2.000
[ 6.522] (**) Logitech M325: (accel) acceleration threshold: 4
[ 6.526] (II) event18 - Logitech M325: is tagged by udev as: Mouse
[ 6.526] (II) event18 - Logitech M325: device set to 600 DPI
[ 6.526] (II) event18 - Logitech M325: device is a pointer
[ 6.528] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse2)
[ 6.528] (II) No input driver specified, ignoring this device.
[ 6.528] (II) This device may have been added with another device file.
[ 6.530] (II) config/udev: Adding input device Logitech M325 (/dev/input/event19)
[ 6.530] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[ 6.530] (II) Using input driver 'libinput' for 'Logitech M325'
[ 6.530] (**) Logitech M325: always reports core events
[ 6.530] (**) Option "Device" "/dev/input/event19"
[ 6.533] (II) event19 - Logitech M325: is tagged by udev as: Mouse
[ 6.534] (II) event19 - Logitech M325: device set to 600 DPI
[ 6.534] (II) event19 - Logitech M325: device is a pointer
[ 6.534] (II) event19 - Logitech M325: device removed
[ 6.565] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.565] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.565] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.565] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0006/0003:046D:400A.0009/input/input51/event19"
[ 6.565] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 16)
[ 6.565] (**) Option "AccelerationScheme" "none"
[ 6.565] (**) Logitech M325: (accel) selected scheme none/0
[ 6.565] (**) Logitech M325: (accel) acceleration factor: 2.000
[ 6.565] (**) Logitech M325: (accel) acceleration threshold: 4
[ 6.569] (II) event19 - Logitech M325: is tagged by udev as: Mouse
[ 6.569] (II) event19 - Logitech M325: device set to 600 DPI
[ 6.569] (II) event19 - Logitech M325: device is a pointer
[ 6.572] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse3)
[ 6.572] (II) No input driver specified, ignoring this device.
[ 6.572] (II) This device may have been added with another device file.
[ 6.573] (II) config/udev: Adding input device PNP0C50:00 06CB:CDAD Mouse (/dev/input/event9)
[ 6.573] (**) PNP0C50:00 06CB:CDAD Mouse: Applying InputClass "libinput pointer catchall"
[ 6.573] (II) Using input driver 'libinput' for 'PNP0C50:00 06CB:CDAD Mouse'
[ 6.573] (**) PNP0C50:00 06CB:CDAD Mouse: always reports core events
[ 6.573] (**) Option "Device" "/dev/input/event9"
[ 6.575] (II) event9 - PNP0C50:00 06CB:CDAD Mouse: is tagged by udev as: Mouse Pointingstick
[ 6.577] (II) event9 - PNP0C50:00 06CB:CDAD Mouse: device is a pointer
[ 6.580] (II) event9 - PNP0C50:00 06CB:CDAD Mouse: device removed
[ 6.618] (II) libinput: PNP0C50:00 06CB:CDAD Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.618] (II) libinput: PNP0C50:00 06CB:CDAD Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.618] (II) libinput: PNP0C50:00 06CB:CDAD Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.618] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-PNP0C50:00/0018:06CB:CDAD.0001/input/input14/event9"
[ 6.618] (II) XINPUT: Adding extended input device "PNP0C50:00 06CB:CDAD Mouse" (type: MOUSE, id 17)
[ 6.619] (**) Option "AccelerationScheme" "none"
[ 6.619] (**) PNP0C50:00 06CB:CDAD Mouse: (accel) selected scheme none/0
[ 6.619] (**) PNP0C50:00 06CB:CDAD Mouse: (accel) acceleration factor: 2.000
[ 6.619] (**) PNP0C50:00 06CB:CDAD Mouse: (accel) acceleration threshold: 4
[ 6.621] (II) event9 - PNP0C50:00 06CB:CDAD Mouse: is tagged by udev as: Mouse Pointingstick
[ 6.623] (II) event9 - PNP0C50:00 06CB:CDAD Mouse: device is a pointer
[ 6.627] (II) config/udev: Adding input device PNP0C50:00 06CB:CDAD Mouse (/dev/input/mouse0)
[ 6.627] (II) No input driver specified, ignoring this device.
[ 6.627] (II) This device may have been added with another device file.
[ 6.629] (II) config/udev: Adding input device PNP0C50:00 06CB:CDAD Touchpad (/dev/input/event10)
[ 6.629] (**) PNP0C50:00 06CB:CDAD Touchpad: Applying InputClass "libinput touchpad catchall"
[ 6.629] (II) Using input driver 'libinput' for 'PNP0C50:00 06CB:CDAD Touchpad'
[ 6.629] (**) PNP0C50:00 06CB:CDAD Touchpad: always reports core events
[ 6.629] (**) Option "Device" "/dev/input/event10"
[ 6.631] (II) event10 - PNP0C50:00 06CB:CDAD Touchpad: is tagged by udev as: Touchpad
[ 6.636] (II) event10 - PNP0C50:00 06CB:CDAD Touchpad: device is a touchpad
[ 6.636] (II) event10 - PNP0C50:00 06CB:CDAD Touchpad: device removed
[ 6.672] (II) libinput: PNP0C50:00 06CB:CDAD Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.672] (II) libinput: PNP0C50:00 06CB:CDAD Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.672] (II) libinput: PNP0C50:00 06CB:CDAD Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.673] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-PNP0C50:00/0018:06CB:CDAD.0001/input/input15/event10"
[ 6.673] (II) XINPUT: Adding extended input device "PNP0C50:00 06CB:CDAD Touchpad" (type: TOUCHPAD, id 18)
[ 6.678] (**) Option "AccelerationScheme" "none"
[ 6.678] (**) PNP0C50:00 06CB:CDAD Touchpad: (accel) selected scheme none/0
[ 6.678] (**) PNP0C50:00 06CB:CDAD Touchpad: (accel) acceleration factor: 2.000
[ 6.678] (**) PNP0C50:00 06CB:CDAD Touchpad: (accel) acceleration threshold: 4
[ 6.681] (II) event10 - PNP0C50:00 06CB:CDAD Touchpad: is tagged by udev as: Touchpad
[ 6.686] (II) event10 - PNP0C50:00 06CB:CDAD Touchpad: device is a touchpad
[ 6.687] (II) config/udev: Adding input device PNP0C50:00 06CB:CDAD Touchpad (/dev/input/mouse1)
[ 6.687] (II) No input driver specified, ignoring this device.
[ 6.687] (II) This device may have been added with another device file.
[ 6.688] (II) config/udev: Adding input device sof-hda-dsp Mic (/dev/input/event16)
[ 6.688] (II) No input driver specified, ignoring this device.
[ 6.688] (II) This device may have been added with another device file.
[ 6.689] (II) config/udev: Adding input device sof-hda-dsp Headphone (/dev/input/event25)
[ 6.689] (II) No input driver specified, ignoring this device.
[ 6.689] (II) This device may have been added with another device file.
[ 6.689] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=3 (/dev/input/event26)
[ 6.689] (II) No input driver specified, ignoring this device.
[ 6.689] (II) This device may have been added with another device file.
[ 6.689] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=4 (/dev/input/event27)
[ 6.689] (II) No input driver specified, ignoring this device.
[ 6.689] (II) This device may have been added with another device file.
[ 6.690] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=5 (/dev/input/event28)
[ 6.690] (II) No input driver specified, ignoring this device.
[ 6.690] (II) This device may have been added with another device file.
[ 6.690] (II) config/udev: Adding input device gpio-keys (/dev/input/event7)
[ 6.690] (II) No input driver specified, ignoring this device.
[ 6.690] (II) This device may have been added with another device file.
[ 6.691] (II) config/udev: Adding input device Intel HID events (/dev/input/event4)
[ 6.691] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 6.691] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 6.691] (II) Using input driver 'libinput' for 'Intel HID events'
[ 6.691] (**) Intel HID events: always reports core events
[ 6.691] (**) Option "Device" "/dev/input/event4"
[ 6.691] (II) event4 - Intel HID events: is tagged by udev as: Keyboard
[ 6.691] (II) event4 - Intel HID events: device is a keyboard
[ 6.692] (II) event4 - Intel HID events: device removed
[ 6.709] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input5/event4"
[ 6.709] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 19)
[ 6.709] (**) Option "xkb_model" "pc105"
[ 6.709] (**) Option "xkb_layout" "es"
[ 6.709] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.711] (II) event4 - Intel HID events: is tagged by udev as: Keyboard
[ 6.711] (II) event4 - Intel HID events: device is a keyboard
[ 6.712] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event5)
[ 6.712] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[ 6.712] (**) Intel HID 5 button array: Applying InputClass "system-keyboard"
[ 6.712] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[ 6.712] (**) Intel HID 5 button array: always reports core events
[ 6.712] (**) Option "Device" "/dev/input/event5"
[ 6.714] (II) event5 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 6.714] (II) event5 - Intel HID 5 button array: device is a keyboard
[ 6.714] (II) event5 - Intel HID 5 button array: device removed
[ 6.745] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input6/event5"
[ 6.745] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 20)
[ 6.745] (**) Option "xkb_model" "pc105"
[ 6.745] (**) Option "xkb_layout" "es"
[ 6.745] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.747] (II) event5 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 6.747] (II) event5 - Intel HID 5 button array: device is a keyboard
[ 6.749] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 6.749] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 6.749] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 6.749] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 6.749] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.749] (**) Option "Device" "/dev/input/event3"
[ 6.751] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 6.751] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 6.756] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 6.782] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 6.782] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 21)
[ 6.782] (**) Option "xkb_model" "pc105"
[ 6.782] (**) Option "xkb_layout" "es"
[ 6.782] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.784] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 6.785] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 6.790] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 6.790] (II) No input driver specified, ignoring this device.
[ 6.790] (II) This device may have been added with another device file.
[ 6.795] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event8)
[ 6.795] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 6.795] (**) MSI WMI hotkeys: Applying InputClass "system-keyboard"
[ 6.795] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[ 6.795] (**) MSI WMI hotkeys: always reports core events
[ 6.795] (**) Option "Device" "/dev/input/event8"
[ 6.796] (II) event8 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 6.796] (II) event8 - MSI WMI hotkeys: device is a keyboard
[ 6.797] (II) event8 - MSI WMI hotkeys: device removed
[ 6.835] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
[ 6.835] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 22)
[ 6.835] (**) Option "xkb_model" "pc105"
[ 6.835] (**) Option "xkb_layout" "es"
[ 6.835] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.837] (II) event8 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 6.837] (II) event8 - MSI WMI hotkeys: device is a keyboard
[ 6.867] (**) SteelSeries SteelSeries KLC: Applying InputClass "libinput keyboard catchall"
[ 6.867] (**) SteelSeries SteelSeries KLC: Applying InputClass "system-keyboard"
[ 6.867] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries KLC'
[ 6.867] (**) SteelSeries SteelSeries KLC: always reports core events
[ 6.867] (**) Option "Device" "/dev/input/event15"
[ 6.867] (II) libinput: SteelSeries SteelSeries KLC: is a virtual subdevice
[ 6.867] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:1038:113A.0003/input/input21/event15"
[ 6.867] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries KLC" (type: KEYBOARD, id 23)
[ 6.867] (**) Option "xkb_model" "pc105"
[ 6.867] (**) Option "xkb_layout" "es"
[ 6.867] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.868] (**) Logitech K750: Applying InputClass "libinput keyboard catchall"
[ 6.868] (**) Logitech K750: Applying InputClass "system-keyboard"
[ 6.868] (II) Using input driver 'libinput' for 'Logitech K750'
[ 6.868] (**) Logitech K750: always reports core events
[ 6.868] (**) Option "Device" "/dev/input/event17"
[ 6.868] (II) libinput: Logitech K750: is a virtual subdevice
[ 6.868] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0006/0003:046D:4002.0007/input/input49/event17"
[ 6.868] (II) XINPUT: Adding extended input device "Logitech K750" (type: KEYBOARD, id 24)
[ 6.868] (**) Option "xkb_model" "pc105"
[ 6.868] (**) Option "xkb_layout" "es"
[ 6.868] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 7.094] (II) config/udev: removing device GENERAL WEBCAM: GENERAL WEBCAM
[ 7.094] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: device removed
[ 7.135] (II) UnloadModule: "libinput"
[ 7.136] (II) config/udev: Adding input device GENERAL WEBCAM: GENERAL WEBCAM (/dev/input/event24)
[ 7.136] (**) GENERAL WEBCAM: GENERAL WEBCAM: Applying InputClass "libinput keyboard catchall"
[ 7.136] (**) GENERAL WEBCAM: GENERAL WEBCAM: Applying InputClass "system-keyboard"
[ 7.136] (II) Using input driver 'libinput' for 'GENERAL WEBCAM: GENERAL WEBCAM'
[ 7.136] (**) GENERAL WEBCAM: GENERAL WEBCAM: always reports core events
[ 7.136] (**) Option "Device" "/dev/input/event24"
[ 7.139] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: is tagged by udev as: Keyboard
[ 7.139] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: device is a keyboard
[ 7.140] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: device removed
[ 7.178] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input31/event24"
[ 7.178] (II) XINPUT: Adding extended input device "GENERAL WEBCAM: GENERAL WEBCAM" (type: KEYBOARD, id 13)
[ 7.178] (**) Option "xkb_model" "pc105"
[ 7.178] (**) Option "xkb_layout" "es"
[ 7.178] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 7.182] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: is tagged by udev as: Keyboard
[ 7.182] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: device is a keyboard
[ 7.215] (II) modeset(0): EDID vendor "SHP", prod id 5469
[ 7.215] (II) modeset(0): Printing DDC gathered Modelines:
[ 7.215] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[ 7.215] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[ 7.243] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=5 (/dev/input/event28)
[ 7.243] (II) No input driver specified, ignoring this device.
[ 7.243] (II) This device may have been added with another device file.
[ 7.243] (II) config/udev: Adding input device sof-hda-dsp Headphone (/dev/input/event25)
[ 7.243] (II) No input driver specified, ignoring this device.
[ 7.243] (II) This device may have been added with another device file.
[ 7.244] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=4 (/dev/input/event27)
[ 7.244] (II) No input driver specified, ignoring this device.
[ 7.244] (II) This device may have been added with another device file.
[ 7.244] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=3 (/dev/input/event26)
[ 7.244] (II) No input driver specified, ignoring this device.
[ 7.244] (II) This device may have been added with another device file.
[ 7.244] (II) config/udev: Adding input device sof-hda-dsp Mic (/dev/input/event16)
[ 7.244] (II) No input driver specified, ignoring this device.
[ 7.244] (II) This device may have been added with another device file.
[ 7.245] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse2)
[ 7.245] (II) No input driver specified, ignoring this device.
[ 7.245] (II) This device may have been added with another device file.
[ 7.245] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse3)
[ 7.245] (II) No input driver specified, ignoring this device.
[ 7.245] (II) This device may have been added with another device file.
[ 7.245] (II) config/udev: removing device Logitech K750
[ 7.245] (II) UnloadModule: "libinput"
[ 7.245] (II) config/udev: removing device Logitech K750
[ 7.245] (II) event17 - Logitech K750: device removed
[ 7.268] (II) UnloadModule: "libinput"
[ 7.269] (II) config/udev: Adding input device Logitech K750 (/dev/input/event17)
[ 7.269] (**) Logitech K750: Applying InputClass "libinput keyboard catchall"
[ 7.269] (**) Logitech K750: Applying InputClass "system-keyboard"
[ 7.269] (II) Using input driver 'libinput' for 'Logitech K750'
[ 7.269] (**) Logitech K750: always reports core events
[ 7.269] (**) Option "Device" "/dev/input/event17"
[ 7.270] (II) event17 - Logitech K750: is tagged by udev as: Keyboard
[ 7.270] (II) event17 - Logitech K750: device is a keyboard
[ 7.270] (II) event17 - Logitech K750: device removed
[ 7.285] (II) libinput: Logitech K750: needs a virtual subdevice
[ 7.285] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0006/0003:046D:4002.0007/input/input49/event17"
[ 7.285] (II) XINPUT: Adding extended input device "Logitech K750" (type: MOUSE, id 14)
[ 7.285] (**) Option "AccelerationScheme" "none"
[ 7.285] (**) Logitech K750: (accel) selected scheme none/0
[ 7.285] (**) Logitech K750: (accel) acceleration factor: 2.000
[ 7.285] (**) Logitech K750: (accel) acceleration threshold: 4
[ 7.287] (II) event17 - Logitech K750: is tagged by udev as: Keyboard
[ 7.287] (II) event17 - Logitech K750: device is a keyboard
[ 7.288] (**) Logitech K750: Applying InputClass "libinput keyboard catchall"
[ 7.288] (**) Logitech K750: Applying InputClass "system-keyboard"
[ 7.288] (II) Using input driver 'libinput' for 'Logitech K750'
[ 7.288] (**) Logitech K750: always reports core events
[ 7.288] (**) Option "Device" "/dev/input/event17"
[ 7.288] (II) libinput: Logitech K750: is a virtual subdevice
[ 7.288] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0006/0003:046D:4002.0007/input/input49/event17"
[ 7.288] (II) XINPUT: Adding extended input device "Logitech K750" (type: KEYBOARD, id 24)
[ 7.288] (**) Option "xkb_model" "pc105"
[ 7.288] (**) Option "xkb_layout" "es"
[ 7.288] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 7.288] (II) config/udev: removing device Logitech M325
[ 7.288] (II) event18 - Logitech M325: device removed
[ 7.332] (II) UnloadModule: "libinput"
[ 7.333] (II) config/udev: Adding input device Logitech M325 (/dev/input/event18)
[ 7.333] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[ 7.333] (II) Using input driver 'libinput' for 'Logitech M325'
[ 7.333] (**) Logitech M325: always reports core events
[ 7.333] (**) Option "Device" "/dev/input/event18"
[ 7.336] (II) event18 - Logitech M325: is tagged by udev as: Mouse
[ 7.337] (II) event18 - Logitech M325: device set to 600 DPI
[ 7.337] (II) event18 - Logitech M325: device is a pointer
[ 7.338] (II) event18 - Logitech M325: device removed
[ 7.385] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.385] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.385] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.385] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0006/0003:046D:400A.0008/input/input50/event18"
[ 7.385] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 15)
[ 7.385] (**) Option "AccelerationScheme" "none"
[ 7.385] (**) Logitech M325: (accel) selected scheme none/0
[ 7.385] (**) Logitech M325: (accel) acceleration factor: 2.000
[ 7.385] (**) Logitech M325: (accel) acceleration threshold: 4
[ 7.389] (II) event18 - Logitech M325: is tagged by udev as: Mouse
[ 7.389] (II) event18 - Logitech M325: device set to 600 DPI
[ 7.389] (II) event18 - Logitech M325: device is a pointer
[ 7.400] (II) config/udev: removing device Logitech M325
[ 7.401] (II) event19 - Logitech M325: device removed
[ 7.448] (II) UnloadModule: "libinput"
[ 7.450] (II) config/udev: Adding input device Logitech M325 (/dev/input/event19)
[ 7.450] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[ 7.450] (II) Using input driver 'libinput' for 'Logitech M325'
[ 7.450] (**) Logitech M325: always reports core events
[ 7.450] (**) Option "Device" "/dev/input/event19"
[ 7.453] (II) event19 - Logitech M325: is tagged by udev as: Mouse
[ 7.453] (II) event19 - Logitech M325: device set to 600 DPI
[ 7.454] (II) event19 - Logitech M325: device is a pointer
[ 7.455] (II) event19 - Logitech M325: device removed
[ 7.492] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.492] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.492] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.492] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0006/0003:046D:400A.0009/input/input51/event19"
[ 7.492] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 16)
[ 7.492] (**) Option "AccelerationScheme" "none"
[ 7.492] (**) Logitech M325: (accel) selected scheme none/0
[ 7.492] (**) Logitech M325: (accel) acceleration factor: 2.000
[ 7.492] (**) Logitech M325: (accel) acceleration threshold: 4
[ 7.496] (II) event19 - Logitech M325: is tagged by udev as: Mouse
[ 7.496] (II) event19 - Logitech M325: device set to 600 DPI
[ 7.496] (II) event19 - Logitech M325: device is a pointer
[ 8.386] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse4)
[ 8.386] (II) No input driver specified, ignoring this device.
[ 8.386] (II) This device may have been added with another device file.
[ 8.430] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event29)
[ 8.430] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"
[ 8.430] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[ 8.430] (**) PS/2 Generic Mouse: always reports core events
[ 8.430] (**) Option "Device" "/dev/input/event29"
[ 8.430] (II) event29 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 8.430] (II) event29 - PS/2 Generic Mouse: device is a pointer
[ 8.431] (II) event29 - PS/2 Generic Mouse: device removed
[ 8.475] (II) libinput: PS/2 Generic Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.475] (II) libinput: PS/2 Generic Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.475] (II) libinput: PS/2 Generic Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.475] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event29"
[ 8.475] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 25)
[ 8.475] (**) Option "AccelerationScheme" "none"
[ 8.475] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[ 8.475] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 8.475] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 8.475] (II) event29 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 8.475] (II) event29 - PS/2 Generic Mouse: device is a pointer
[ 12.978] (II) modeset(0): EDID vendor "SHP", prod id 5469
[ 12.978] (II) modeset(0): Printing DDC gathered Modelines:
[ 12.978] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[ 12.978] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[ 13.521] (II) modeset(0): EDID vendor "SHP", prod id 5469
[ 13.521] (II) modeset(0): Printing DDC gathered Modelines:
[ 13.521] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[ 13.521] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[ 13.852] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[ 2583.566] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event30)
[ 2583.566] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[ 2583.566] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[ 2583.566] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[ 2583.566] (**) WH-1000XM4 (AVRCP): always reports core events
[ 2583.566] (**) Option "Device" "/dev/input/event30"
[ 2583.567] (II) event30 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[ 2583.567] (II) event30 - WH-1000XM4 (AVRCP): device is a keyboard
[ 2583.567] (II) event30 - WH-1000XM4 (AVRCP): device removed
[ 2583.585] (**) Option "config_info" "udev:/sys/devices/virtual/input/input52/event30"
[ 2583.585] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 26)
[ 2583.585] (**) Option "xkb_model" "pc105"
[ 2583.585] (**) Option "xkb_layout" "es"
[ 2583.585] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2583.587] (II) event30 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[ 2583.587] (II) event30 - WH-1000XM4 (AVRCP): device is a keyboard
[ 2586.190] (II) config/udev: Adding input device Echo Dot-GR8 (AVRCP) (/dev/input/event31)
[ 2586.190] (**) Echo Dot-GR8 (AVRCP): Applying InputClass "libinput keyboard catchall"
[ 2586.190] (**) Echo Dot-GR8 (AVRCP): Applying InputClass "system-keyboard"
[ 2586.190] (II) Using input driver 'libinput' for 'Echo Dot-GR8 (AVRCP)'
[ 2586.190] (**) Echo Dot-GR8 (AVRCP): always reports core events
[ 2586.190] (**) Option "Device" "/dev/input/event31"
[ 2586.190] (II) event31 - Echo Dot-GR8 (AVRCP): is tagged by udev as: Keyboard
[ 2586.190] (II) event31 - Echo Dot-GR8 (AVRCP): device is a keyboard
[ 2586.191] (II) event31 - Echo Dot-GR8 (AVRCP): device removed
[ 2586.225] (**) Option "config_info" "udev:/sys/devices/virtual/input/input53/event31"
[ 2586.225] (II) XINPUT: Adding extended input device "Echo Dot-GR8 (AVRCP)" (type: KEYBOARD, id 27)
[ 2586.225] (**) Option "xkb_model" "pc105"
[ 2586.225] (**) Option "xkb_layout" "es"
[ 2586.225] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2586.227] (II) event31 - Echo Dot-GR8 (AVRCP): is tagged by udev as: Keyboard
[ 2586.228] (II) event31 - Echo Dot-GR8 (AVRCP): device is a keyboard
[ 6836.658] (II) event30 - WH-1000XM4 (AVRCP): device removed
[ 6836.678] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[ 6836.681] (II) UnloadModule: "libinput"
[ 11384.463] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event30)
[ 11384.463] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[ 11384.463] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[ 11384.463] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[ 11384.463] (**) WH-1000XM4 (AVRCP): always reports core events
[ 11384.463] (**) Option "Device" "/dev/input/event30"
[ 11384.463] (II) event30 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[ 11384.463] (II) event30 - WH-1000XM4 (AVRCP): device is a keyboard
[ 11384.463] (II) event30 - WH-1000XM4 (AVRCP): device removed
[ 11384.484] (**) Option "config_info" "udev:/sys/devices/virtual/input/input54/event30"
[ 11384.484] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 26)
[ 11384.484] (**) Option "xkb_model" "pc105"
[ 11384.484] (**) Option "xkb_layout" "es"
[ 11384.484] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 11384.484] (II) event30 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[ 11384.484] (II) event30 - WH-1000XM4 (AVRCP): device is a keyboard
[ 15710.730] (II) event30 - WH-1000XM4 (AVRCP): device removed
[ 15710.767] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[ 15710.771] (II) UnloadModule: "libinput"
[ 17330.496] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event30)
[ 17330.496] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[ 17330.496] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[ 17330.496] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[ 17330.496] (**) WH-1000XM4 (AVRCP): always reports core events
[ 17330.496] (**) Option "Device" "/dev/input/event30"
[ 17330.496] (II) event30 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[ 17330.496] (II) event30 - WH-1000XM4 (AVRCP): device is a keyboard
[ 17330.496] (II) event30 - WH-1000XM4 (AVRCP): device removed
[ 17330.530] (**) Option "config_info" "udev:/sys/devices/virtual/input/input55/event30"
[ 17330.530] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 26)
[ 17330.530] (**) Option "xkb_model" "pc105"
[ 17330.530] (**) Option "xkb_layout" "es"
[ 17330.530] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 17330.531] (II) event30 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[ 17330.531] (II) event30 - WH-1000XM4 (AVRCP): device is a keyboard
[ 22965.276] (II) event30 - WH-1000XM4 (AVRCP): device removed
[ 22965.296] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[ 22965.297] (II) UnloadModule: "libinput"
[ 24915.297] (II) event29 - PS/2 Generic Mouse: device removed
[ 24915.406] (II) event31 - Echo Dot-GR8 (AVRCP): device removed
[ 24915.451] (II) config/udev: removing device PS/2 Generic Mouse
[ 24915.455] (II) UnloadModule: "libinput"
[ 24915.459] (II) modeset(0): EDID vendor "SHP", prod id 5469
[ 24915.459] (II) modeset(0): Printing DDC gathered Modelines:
[ 24915.459] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[ 24915.459] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[ 24915.460] (II) config/udev: removing device Echo Dot-GR8 (AVRCP)
[ 24915.461] (II) UnloadModule: "libinput"
[ 24916.603] (II) modeset(0): EDID vendor "SHP", prod id 5469
[ 24916.603] (II) modeset(0): Printing DDC gathered Modelines:
[ 24916.603] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[ 24916.603] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[ 24916.642] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[ 24917.161] (II) config/udev: Adding input device Echo Dot-GR8 (AVRCP) (/dev/input/event29)
[ 24917.161] (**) Echo Dot-GR8 (AVRCP): Applying InputClass "libinput keyboard catchall"
[ 24917.161] (**) Echo Dot-GR8 (AVRCP): Applying InputClass "system-keyboard"
[ 24917.161] (II) Using input driver 'libinput' for 'Echo Dot-GR8 (AVRCP)'
[ 24917.161] (**) Echo Dot-GR8 (AVRCP): always reports core events
[ 24917.161] (**) Option "Device" "/dev/input/event29"
[ 24917.162] (II) event29 - Echo Dot-GR8 (AVRCP): is tagged by udev as: Keyboard
[ 24917.162] (II) event29 - Echo Dot-GR8 (AVRCP): device is a keyboard
[ 24917.162] (II) event29 - Echo Dot-GR8 (AVRCP): device removed
[ 24917.182] (**) Option "config_info" "udev:/sys/devices/virtual/input/input58/event29"
[ 24917.182] (II) XINPUT: Adding extended input device "Echo Dot-GR8 (AVRCP)" (type: KEYBOARD, id 25)
[ 24917.182] (**) Option "xkb_model" "pc105"
[ 24917.182] (**) Option "xkb_layout" "es"
[ 24917.182] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 24917.183] (II) event29 - Echo Dot-GR8 (AVRCP): is tagged by udev as: Keyboard
[ 24917.183] (II) event29 - Echo Dot-GR8 (AVRCP): device is a keyboard
[ 24917.387] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[ 24918.407] (II) modeset(0): EDID vendor "SHP", prod id 5469
[ 24918.407] (II) modeset(0): Printing DDC gathered Modelines:
[ 24918.407] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[ 24918.407] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[ 24919.557] (II) modeset(0): EDID vendor "SHP", prod id 5469
[ 24919.557] (II) modeset(0): Printing DDC gathered Modelines:
[ 24919.557] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[ 24919.557] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[ 24919.585] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[ 24920.308] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[ 24929.882] (II) event29 - Echo Dot-GR8 (AVRCP): device removed
[ 24929.919] (II) config/udev: removing device Echo Dot-GR8 (AVRCP)
[ 24929.923] (II) UnloadModule: "libinput"
[ 32192.567] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event29)
[ 32192.567] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[ 32192.567] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[ 32192.567] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[ 32192.567] (**) WH-1000XM4 (AVRCP): always reports core events
[ 32192.567] (**) Option "Device" "/dev/input/event29"
[ 32192.568] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[ 32192.568] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[ 32192.568] (II) event29 - WH-1000XM4 (AVRCP): device removed
[ 32192.592] (**) Option "config_info" "udev:/sys/devices/virtual/input/input59/event29"
[ 32192.592] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 25)
[ 32192.592] (**) Option "xkb_model" "pc105"
[ 32192.592] (**) Option "xkb_layout" "es"
[ 32192.592] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 32192.592] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[ 32192.592] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[ 33180.252] (II) event29 - WH-1000XM4 (AVRCP): device removed
[ 33180.278] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[ 33180.283] (II) UnloadModule: "libinput"
[ 37152.229] (II) modeset(0): EDID vendor "SHP", prod id 5469
[ 37152.229] (II) modeset(0): Printing DDC gathered Modelines:
[ 37152.229] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[ 37152.229] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[ 37153.673] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[ 37410.053] (II) modeset(0): EDID vendor "SHP", prod id 5469
[ 37410.053] (II) modeset(0): Printing DDC gathered Modelines:
[ 37410.053] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[ 37410.053] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[ 37410.810] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[ 41621.236] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event29)
[ 41621.236] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[ 41621.236] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[ 41621.236] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[ 41621.236] (**) WH-1000XM4 (AVRCP): always reports core events
[ 41621.236] (**) Option "Device" "/dev/input/event29"
[ 41621.236] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[ 41621.236] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[ 41621.237] (II) event29 - WH-1000XM4 (AVRCP): device removed
[ 41621.264] (**) Option "config_info" "udev:/sys/devices/virtual/input/input60/event29"
[ 41621.264] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 25)
[ 41621.264] (**) Option "xkb_model" "pc105"
[ 41621.264] (**) Option "xkb_layout" "es"
[ 41621.264] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 41621.265] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[ 41621.265] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[ 43042.127] (II) event29 - WH-1000XM4 (AVRCP): device removed
[ 43042.161] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[ 43042.162] (II) UnloadModule: "libinput"
[ 64670.107] (II) event24 - GENERAL WEBCAM: GENERAL WEBCAM: device removed
[ 64670.179] (WW) modeset(0): hotplug event: connector 330's link-state is BAD, tried resetting the current mode. You may be leftwith a black screen if this fails...
[ 64670.181] (II) modeset(0): EDID vendor "SHP", prod id 5469
[ 64670.181] (II) modeset(0): Printing DDC gathered Modelines:
[ 64670.181] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[ 64670.181] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[ 64670.231] (II) config/udev: removing device GENERAL WEBCAM: GENERAL WEBCAM
[ 64670.232] (II) UnloadModule: "libinput"
[ 64670.372] (II) event17 - Logitech K750: device removed
[ 64670.425] (II) config/udev: removing device Logitech K750
[ 64670.427] (II) UnloadModule: "libinput"
[ 64670.427] (II) config/udev: removing device Logitech K750
[ 64670.427] (II) UnloadModule: "libinput"
[ 64670.427] (II) event18 - Logitech M325: device removed
[ 64670.459] (II) config/udev: removing device Logitech M325
[ 64670.461] (II) UnloadModule: "libinput"
[ 64670.565] (II) event19 - Logitech M325: device removed
[ 64670.602] (II) config/udev: removing device Logitech M325
[ 64670.606] (II) UnloadModule: "libinput"
[ 64671.214] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse2)
[ 64671.214] (II) No input driver specified, ignoring this device.
[ 64671.214] (II) This device may have been added with another device file.
[ 64671.423] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event24)
[ 64671.423] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 64671.423] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 64671.423] (**) Logitech USB Optical Mouse: always reports core events
[ 64671.423] (**) Option "Device" "/dev/input/event24"
[ 64671.424] (II) event24 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 64671.424] (II) event24 - Logitech USB Optical Mouse: device is a pointer
[ 64671.424] (II) event24 - Logitech USB Optical Mouse: device removed
[ 64671.478] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 64671.478] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 64671.478] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 64671.478] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.4/3-5.4:1.0/0003:046D:C077.000C/input/input66/event24"
[ 64671.478] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 13)
[ 64671.479] (**) Option "AccelerationScheme" "none"
[ 64671.479] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 64671.479] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 64671.479] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 64671.480] (II) event24 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 64671.480] (II) event24 - Logitech USB Optical Mouse: device is a pointer
[ 64671.494] (II) modeset(0): Allocate new frame buffer 3840x1080 stride
[ 64671.812] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event18)
[ 64671.812] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 64671.812] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[ 64671.812] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[ 64671.812] (**) Logitech USB Keyboard Consumer Control: always reports core events
[ 64671.812] (**) Option "Device" "/dev/input/event18"
[ 64671.813] (II) event18 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 64671.813] (II) event18 - Logitech USB Keyboard Consumer Control: device is a keyboard
[ 64671.814] (II) event18 - Logitech USB Keyboard Consumer Control: device removed
[ 64671.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3:1.1/0003:046D:C31C.000B/input/input64/event18"
[ 64671.842] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 14)
[ 64671.842] (**) Option "xkb_model" "pc105"
[ 64671.842] (**) Option "xkb_layout" "es"
[ 64671.842] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 64671.843] (II) event18 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 64671.843] (II) event18 - Logitech USB Keyboard Consumer Control: device is a keyboard
[ 64671.844] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event17)
[ 64671.844] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 64671.844] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 64671.844] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[ 64671.844] (**) Logitech USB Keyboard: always reports core events
[ 64671.844] (**) Option "Device" "/dev/input/event17"
[ 64671.845] (II) event17 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 64671.845] (II) event17 - Logitech USB Keyboard: device is a keyboard
[ 64671.845] (II) event17 - Logitech USB Keyboard: device removed
[ 64671.862] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3:1.0/0003:046D:C31C.000A/input/input63/event17"
[ 64671.862] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 15)
[ 64671.862] (**) Option "xkb_model" "pc105"
[ 64671.862] (**) Option "xkb_layout" "es"
[ 64671.862] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 64671.863] (II) event17 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 64671.863] (II) event17 - Logitech USB Keyboard: device is a keyboard
[ 64671.865] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event19)
[ 64671.865] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 64671.865] (**) Logitech USB Keyboard System Control: Applying InputClass "system-keyboard"
[ 64671.865] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[ 64671.865] (**) Logitech USB Keyboard System Control: always reports core events
[ 64671.865] (**) Option "Device" "/dev/input/event19"
[ 64671.865] (II) event19 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 64671.865] (II) event19 - Logitech USB Keyboard System Control: device is a keyboard
[ 64671.866] (II) event19 - Logitech USB Keyboard System Control: device removed
[ 64671.888] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3:1.1/0003:046D:C31C.000B/input/input65/event19"
[ 64671.888] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 16)
[ 64671.888] (**) Option "xkb_model" "pc105"
[ 64671.888] (**) Option "xkb_layout" "es"
[ 64671.888] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 64671.889] (II) event19 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 64671.890] (II) event19 - Logitech USB Keyboard System Control: device is a keyboard
[112248.622] (II) event17 - Logitech USB Keyboard: device removed
[112248.714] (II) event18 - Logitech USB Keyboard Consumer Control: device removed
[112248.794] (II) event19 - Logitech USB Keyboard System Control: device removed
[112248.844] (II) event24 - Logitech USB Optical Mouse: device removed
[112249.455] (II) modeset(0): EDID vendor "SHP", prod id 5469
[112249.455] (II) modeset(0): Printing DDC gathered Modelines:
[112249.455] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[112249.455] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[112249.507] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[112250.023] (II) config/udev: removing device Logitech USB Keyboard System Control
[112250.024] (II) UnloadModule: "libinput"
[112250.025] (II) config/udev: removing device Logitech USB Keyboard
[112250.027] (II) UnloadModule: "libinput"
[112250.027] (II) config/udev: removing device Logitech USB Keyboard Consumer Control
[112250.029] (II) UnloadModule: "libinput"
[112250.029] (II) config/udev: removing device Logitech USB Optical Mouse
[112250.032] (II) UnloadModule: "libinput"
[112250.249] (II) modeset(0): Allocate new frame buffer 3840x1080 stride
[112251.271] (II) modeset(0): EDID vendor "SHP", prod id 5469
[112251.271] (II) modeset(0): Printing DDC gathered Modelines:
[112251.271] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[112251.271] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[112251.361] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse3)
[112251.361] (II) No input driver specified, ignoring this device.
[112251.361] (II) This device may have been added with another device file.
[112251.362] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse2)
[112251.362] (II) No input driver specified, ignoring this device.
[112251.362] (II) This device may have been added with another device file.
[112251.428] (II) config/udev: Adding input device Logitech M325 (/dev/input/event19)
[112251.429] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[112251.429] (II) Using input driver 'libinput' for 'Logitech M325'
[112251.429] (**) Logitech M325: always reports core events
[112251.429] (**) Option "Device" "/dev/input/event19"
[112251.430] (II) event19 - Logitech M325: is tagged by udev as: Mouse
[112251.430] (II) event19 - Logitech M325: device set to 600 DPI
[112251.430] (II) event19 - Logitech M325: device is a pointer
[112251.431] (II) event19 - Logitech M325: device removed
[112251.587] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[112251.587] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[112251.587] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[112251.587] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.000F/0003:046D:400A.0011/input/input73/event19"
[112251.587] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 13)
[112251.588] (**) Option "AccelerationScheme" "none"
[112251.589] (**) Logitech M325: (accel) selected scheme none/0
[112251.589] (**) Logitech M325: (accel) acceleration factor: 2.000
[112251.589] (**) Logitech M325: (accel) acceleration threshold: 4
[112251.591] (II) event19 - Logitech M325: is tagged by udev as: Mouse
[112251.591] (II) event19 - Logitech M325: device set to 600 DPI
[112251.591] (II) event19 - Logitech M325: device is a pointer
[112251.592] (II) config/udev: Adding input device Logitech K750 (/dev/input/event18)
[112251.592] (**) Logitech K750: Applying InputClass "libinput keyboard catchall"
[112251.592] (**) Logitech K750: Applying InputClass "system-keyboard"
[112251.592] (II) Using input driver 'libinput' for 'Logitech K750'
[112251.592] (**) Logitech K750: always reports core events
[112251.592] (**) Option "Device" "/dev/input/event18"
[112251.594] (II) event18 - Logitech K750: is tagged by udev as: Keyboard
[112251.594] (II) event18 - Logitech K750: device is a keyboard
[112251.594] (II) event18 - Logitech K750: device removed
[112251.647] (II) libinput: Logitech K750: needs a virtual subdevice
[112251.647] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.000F/0003:046D:4002.0010/input/input72/event18"
[112251.647] (II) XINPUT: Adding extended input device "Logitech K750" (type: MOUSE, id 14)
[112251.648] (**) Option "AccelerationScheme" "none"
[112251.648] (**) Logitech K750: (accel) selected scheme none/0
[112251.648] (**) Logitech K750: (accel) acceleration factor: 2.000
[112251.648] (**) Logitech K750: (accel) acceleration threshold: 4
[112251.649] (II) event18 - Logitech K750: is tagged by udev as: Keyboard
[112251.649] (II) event18 - Logitech K750: device is a keyboard
[112251.650] (**) Logitech K750: Applying InputClass "libinput keyboard catchall"
[112251.650] (**) Logitech K750: Applying InputClass "system-keyboard"
[112251.650] (II) Using input driver 'libinput' for 'Logitech K750'
[112251.650] (**) Logitech K750: always reports core events
[112251.650] (**) Option "Device" "/dev/input/event18"
[112251.650] (II) libinput: Logitech K750: is a virtual subdevice
[112251.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.000F/0003:046D:4002.0010/input/input72/event18"
[112251.650] (II) XINPUT: Adding extended input device "Logitech K750" (type: KEYBOARD, id 15)
[112251.650] (**) Option "xkb_model" "pc105"
[112251.650] (**) Option "xkb_layout" "es"
[112251.650] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[112251.651] (II) config/udev: Adding input device GENERAL WEBCAM: GENERAL WEBCAM (/dev/input/event17)
[112251.651] (**) GENERAL WEBCAM: GENERAL WEBCAM: Applying InputClass "libinput keyboard catchall"
[112251.651] (**) GENERAL WEBCAM: GENERAL WEBCAM: Applying InputClass "system-keyboard"
[112251.651] (II) Using input driver 'libinput' for 'GENERAL WEBCAM: GENERAL WEBCAM'
[112251.651] (**) GENERAL WEBCAM: GENERAL WEBCAM: always reports core events
[112251.651] (**) Option "Device" "/dev/input/event17"
[112251.652] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: is tagged by udev as: Keyboard
[112251.652] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device is a keyboard
[112251.652] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device removed
[112251.720] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input71/event17"
[112251.721] (II) XINPUT: Adding extended input device "GENERAL WEBCAM: GENERAL WEBCAM" (type: KEYBOARD, id 16)
[112251.721] (**) Option "xkb_model" "pc105"
[112251.721] (**) Option "xkb_layout" "es"
[112251.721] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[112251.725] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: is tagged by udev as: Keyboard
[112251.725] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device is a keyboard
[112251.728] (II) config/udev: Adding input device Logitech M325 (/dev/input/event24)
[112251.728] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[112251.728] (II) Using input driver 'libinput' for 'Logitech M325'
[112251.728] (**) Logitech M325: always reports core events
[112251.728] (**) Option "Device" "/dev/input/event24"
[112251.732] (II) event24 - Logitech M325: is tagged by udev as: Mouse
[112251.732] (II) event24 - Logitech M325: device set to 600 DPI
[112251.732] (II) event24 - Logitech M325: device is a pointer
[112251.733] (II) event24 - Logitech M325: device removed
[112251.784] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[112251.784] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[112251.784] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[112251.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.000F/0003:046D:400A.0012/input/input74/event24"
[112251.784] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 24)
[112251.785] (**) Option "AccelerationScheme" "none"
[112251.786] (**) Logitech M325: (accel) selected scheme none/0
[112251.786] (**) Logitech M325: (accel) acceleration factor: 2.000
[112251.786] (**) Logitech M325: (accel) acceleration threshold: 4
[112251.790] (II) event24 - Logitech M325: is tagged by udev as: Mouse
[112251.790] (II) event24 - Logitech M325: device set to 600 DPI
[112251.790] (II) event24 - Logitech M325: device is a pointer
[112252.403] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[112252.464] (II) modeset(0): EDID vendor "SHP", prod id 5469
[112252.465] (II) modeset(0): Printing DDC gathered Modelines:
[112252.465] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[112252.465] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[112253.226] (II) modeset(0): Allocate new frame buffer 3840x1080 stride
[112273.842] (II) config/udev: Adding input device Echo Dot-GR8 (AVRCP) (/dev/input/event29)
[112273.842] (**) Echo Dot-GR8 (AVRCP): Applying InputClass "libinput keyboard catchall"
[112273.842] (**) Echo Dot-GR8 (AVRCP): Applying InputClass "system-keyboard"
[112273.842] (II) Using input driver 'libinput' for 'Echo Dot-GR8 (AVRCP)'
[112273.842] (**) Echo Dot-GR8 (AVRCP): always reports core events
[112273.842] (**) Option "Device" "/dev/input/event29"
[112273.844] (II) event29 - Echo Dot-GR8 (AVRCP): is tagged by udev as: Keyboard
[112273.844] (II) event29 - Echo Dot-GR8 (AVRCP): device is a keyboard
[112273.845] (II) event29 - Echo Dot-GR8 (AVRCP): device removed
[112273.877] (**) Option "config_info" "udev:/sys/devices/virtual/input/input75/event29"
[112273.877] (II) XINPUT: Adding extended input device "Echo Dot-GR8 (AVRCP)" (type: KEYBOARD, id 25)
[112273.877] (**) Option "xkb_model" "pc105"
[112273.877] (**) Option "xkb_layout" "es"
[112273.877] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[112273.880] (II) event29 - Echo Dot-GR8 (AVRCP): is tagged by udev as: Keyboard
[112273.880] (II) event29 - Echo Dot-GR8 (AVRCP): device is a keyboard
[112277.294] (II) event29 - Echo Dot-GR8 (AVRCP): device removed
[112277.334] (II) config/udev: removing device Echo Dot-GR8 (AVRCP)
[112277.338] (II) UnloadModule: "libinput"
[112281.547] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[115986.494] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event29)
[115986.494] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[115986.494] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[115986.494] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[115986.494] (**) WH-1000XM4 (AVRCP): always reports core events
[115986.494] (**) Option "Device" "/dev/input/event29"
[115986.494] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[115986.494] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[115986.494] (II) event29 - WH-1000XM4 (AVRCP): device removed
[115986.517] (**) Option "config_info" "udev:/sys/devices/virtual/input/input76/event29"
[115986.517] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 25)
[115986.517] (**) Option "xkb_model" "pc105"
[115986.517] (**) Option "xkb_layout" "es"
[115986.517] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[115986.517] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[115986.517] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[122977.669] (II) event29 - WH-1000XM4 (AVRCP): device removed
[122977.690] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[122977.691] (II) UnloadModule: "libinput"
[127417.553] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event29)
[127417.553] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[127417.553] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[127417.553] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[127417.553] (**) WH-1000XM4 (AVRCP): always reports core events
[127417.553] (**) Option "Device" "/dev/input/event29"
[127417.555] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[127417.555] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[127417.555] (II) event29 - WH-1000XM4 (AVRCP): device removed
[127417.582] (**) Option "config_info" "udev:/sys/devices/virtual/input/input77/event29"
[127417.582] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 25)
[127417.582] (**) Option "xkb_model" "pc105"
[127417.582] (**) Option "xkb_layout" "es"
[127417.582] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[127417.583] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[127417.583] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[128773.692] (II) event29 - WH-1000XM4 (AVRCP): device removed
[128773.725] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[128773.730] (II) UnloadModule: "libinput"
[132464.575] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event29)
[132464.575] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[132464.575] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[132464.575] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[132464.575] (**) WH-1000XM4 (AVRCP): always reports core events
[132464.575] (**) Option "Device" "/dev/input/event29"
[132464.576] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[132464.576] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[132464.576] (II) event29 - WH-1000XM4 (AVRCP): device removed
[132464.612] (**) Option "config_info" "udev:/sys/devices/virtual/input/input78/event29"
[132464.612] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 25)
[132464.612] (**) Option "xkb_model" "pc105"
[132464.612] (**) Option "xkb_layout" "es"
[132464.612] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[132464.613] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[132464.613] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[135261.078] (II) event29 - WH-1000XM4 (AVRCP): device removed
[135261.101] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[135261.103] (II) UnloadModule: "libinput"
[136325.562] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event29)
[136325.562] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[136325.562] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[136325.562] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[136325.562] (**) WH-1000XM4 (AVRCP): always reports core events
[136325.562] (**) Option "Device" "/dev/input/event29"
[136325.562] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[136325.562] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[136325.563] (II) event29 - WH-1000XM4 (AVRCP): device removed
[136325.595] (**) Option "config_info" "udev:/sys/devices/virtual/input/input79/event29"
[136325.595] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 25)
[136325.595] (**) Option "xkb_model" "pc105"
[136325.595] (**) Option "xkb_layout" "es"
[136325.595] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[136325.598] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[136325.598] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[138116.135] (II) event29 - WH-1000XM4 (AVRCP): device removed
[138116.165] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[138116.168] (II) UnloadModule: "libinput"
[141102.601] (II) modeset(0): EDID vendor "SHP", prod id 5469
[141102.601] (II) modeset(0): Printing DDC gathered Modelines:
[141102.601] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[141102.601] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[141103.417] (II) modeset(0): EDID vendor "SHP", prod id 5469
[141103.417] (II) modeset(0): Printing DDC gathered Modelines:
[141103.417] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[141103.417] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[141103.465] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[141104.220] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[141105.239] (II) modeset(0): EDID vendor "SHP", prod id 5469
[141105.239] (II) modeset(0): Printing DDC gathered Modelines:
[141105.239] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[141105.239] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[141106.364] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[141106.416] (II) modeset(0): EDID vendor "SHP", prod id 5469
[141106.416] (II) modeset(0): Printing DDC gathered Modelines:
[141106.416] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[141106.416] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[141107.214] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[141126.217] (II) config/udev: Adding input device Echo Dot-GR8 (AVRCP) (/dev/input/event29)
[141126.217] (**) Echo Dot-GR8 (AVRCP): Applying InputClass "libinput keyboard catchall"
[141126.217] (**) Echo Dot-GR8 (AVRCP): Applying InputClass "system-keyboard"
[141126.217] (II) Using input driver 'libinput' for 'Echo Dot-GR8 (AVRCP)'
[141126.217] (**) Echo Dot-GR8 (AVRCP): always reports core events
[141126.217] (**) Option "Device" "/dev/input/event29"
[141126.218] (II) event29 - Echo Dot-GR8 (AVRCP): is tagged by udev as: Keyboard
[141126.218] (II) event29 - Echo Dot-GR8 (AVRCP): device is a keyboard
[141126.218] (II) event29 - Echo Dot-GR8 (AVRCP): device removed
[141126.241] (**) Option "config_info" "udev:/sys/devices/virtual/input/input82/event29"
[141126.241] (II) XINPUT: Adding extended input device "Echo Dot-GR8 (AVRCP)" (type: KEYBOARD, id 25)
[141126.241] (**) Option "xkb_model" "pc105"
[141126.241] (**) Option "xkb_layout" "es"
[141126.241] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[141126.242] (II) event29 - Echo Dot-GR8 (AVRCP): is tagged by udev as: Keyboard
[141126.242] (II) event29 - Echo Dot-GR8 (AVRCP): device is a keyboard
[160582.539] (II) event29 - Echo Dot-GR8 (AVRCP): device removed
[160582.572] (II) config/udev: removing device Echo Dot-GR8 (AVRCP)
[160582.573] (II) UnloadModule: "libinput"
[163283.096] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device removed
[163283.348] (II) event18 - Logitech K750: device removed
[163283.388] (II) event19 - Logitech M325: device removed
[163283.431] (II) event24 - Logitech M325: device removed
[163283.522] (II) event15 - SteelSeries SteelSeries KLC: device removed
[163289.358] (WW) modeset(0): hotplug event: connector 330's link-state is BAD, tried resetting the current mode. You may be leftwith a black screen if this fails...
[163289.361] (II) modeset(0): EDID vendor "SHP", prod id 5469
[163289.361] (II) modeset(0): Printing DDC gathered Modelines:
[163289.361] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[163289.361] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[163295.484] (WW) modeset(0): hotplug event: connector 330's link-state is BAD, tried resetting the current mode. You may be leftwith a black screen if this fails...
[163295.485] (II) modeset(0): EDID vendor "SHP", prod id 5469
[163295.485] (II) modeset(0): Printing DDC gathered Modelines:
[163295.485] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[163295.485] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[163295.523] (EE) modeset(0): failed to set mode: No such file or directory
[163295.523] (WW) modeset(0): hotplug event: connector 330's link-state is BAD, tried resetting the current mode. You may be leftwith a black screen if this fails...
[163295.524] (II) modeset(0): EDID vendor "SHP", prod id 5469
[163295.524] (II) modeset(0): Printing DDC gathered Modelines:
[163295.524] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[163295.524] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[163295.524] (II) config/udev: removing device GENERAL WEBCAM: GENERAL WEBCAM
[163295.526] (II) UnloadModule: "libinput"
[163295.528] (II) config/udev: removing device Logitech K750
[163295.529] (II) UnloadModule: "libinput"
[163295.529] (II) config/udev: removing device Logitech K750
[163295.530] (II) UnloadModule: "libinput"
[163295.530] (II) config/udev: removing device Logitech M325
[163295.532] (II) UnloadModule: "libinput"
[163295.532] (II) config/udev: removing device Logitech M325
[163295.534] (II) UnloadModule: "libinput"
[163295.535] (II) config/udev: removing device SteelSeries SteelSeries KLC
[163295.536] (II) UnloadModule: "libinput"
[163295.536] (II) config/udev: removing device SteelSeries SteelSeries KLC
[163295.536] (II) UnloadModule: "libinput"
[163295.537] (II) config/udev: Adding input device SteelSeries SteelSeries KLC (/dev/input/event15)
[163295.537] (**) SteelSeries SteelSeries KLC: Applying InputClass "libinput keyboard catchall"
[163295.537] (**) SteelSeries SteelSeries KLC: Applying InputClass "system-keyboard"
[163295.537] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries KLC'
[163295.537] (**) SteelSeries SteelSeries KLC: always reports core events
[163295.537] (**) Option "Device" "/dev/input/event15"
[163295.538] (II) event15 - SteelSeries SteelSeries KLC: is tagged by udev as: Keyboard
[163295.538] (II) event15 - SteelSeries SteelSeries KLC: device is a keyboard
[163295.538] (II) event15 - SteelSeries SteelSeries KLC: device removed
[163295.562] (II) libinput: SteelSeries SteelSeries KLC: needs a virtual subdevice
[163295.562] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:1038:113A.0014/input/input85/event15"
[163295.562] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries KLC" (type: MOUSE, id 12)
[163295.563] (**) Option "AccelerationScheme" "none"
[163295.563] (**) SteelSeries SteelSeries KLC: (accel) selected scheme none/0
[163295.563] (**) SteelSeries SteelSeries KLC: (accel) acceleration factor: 2.000
[163295.563] (**) SteelSeries SteelSeries KLC: (accel) acceleration threshold: 4
[163295.564] (II) event15 - SteelSeries SteelSeries KLC: is tagged by udev as: Keyboard
[163295.564] (II) event15 - SteelSeries SteelSeries KLC: device is a keyboard
[163295.564] (**) SteelSeries SteelSeries KLC: Applying InputClass "libinput keyboard catchall"
[163295.564] (**) SteelSeries SteelSeries KLC: Applying InputClass "system-keyboard"
[163295.564] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries KLC'
[163295.564] (**) SteelSeries SteelSeries KLC: always reports core events
[163295.564] (**) Option "Device" "/dev/input/event15"
[163295.564] (II) libinput: SteelSeries SteelSeries KLC: is a virtual subdevice
[163295.564] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:1038:113A.0014/input/input85/event15"
[163295.564] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries KLC" (type: KEYBOARD, id 13)
[163295.564] (**) Option "xkb_model" "pc105"
[163295.564] (**) Option "xkb_layout" "es"
[163295.564] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[163297.063] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[179389.263] (EE) event10 - PNP0C50:00 06CB:CDAD Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.23.0/touchpad-jumping-cursors.html for details
[181296.252] (II) modeset(0): EDID vendor "SHP", prod id 5469
[181296.253] (II) modeset(0): Printing DDC gathered Modelines:
[181296.253] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[181296.253] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[181297.045] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[181298.072] (II) modeset(0): EDID vendor "SHP", prod id 5469
[181298.072] (II) modeset(0): Printing DDC gathered Modelines:
[181298.072] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[181298.072] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[181298.731] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse2)
[181298.731] (II) No input driver specified, ignoring this device.
[181298.731] (II) This device may have been added with another device file.
[181298.732] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse3)
[181298.732] (II) No input driver specified, ignoring this device.
[181298.732] (II) This device may have been added with another device file.
[181298.784] (II) config/udev: Adding input device Logitech M325 (/dev/input/event19)
[181298.784] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[181298.785] (II) Using input driver 'libinput' for 'Logitech M325'
[181298.785] (**) Logitech M325: always reports core events
[181298.785] (**) Option "Device" "/dev/input/event19"
[181298.786] (II) event19 - Logitech M325: is tagged by udev as: Mouse
[181298.786] (II) event19 - Logitech M325: device set to 600 DPI
[181298.786] (II) event19 - Logitech M325: device is a pointer
[181298.786] (II) event19 - Logitech M325: device removed
[181298.840] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[181298.840] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[181298.840] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[181298.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0017/0003:046D:400A.0019/input/input90/event19"
[181298.840] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 14)
[181298.841] (**) Option "AccelerationScheme" "none"
[181298.841] (**) Logitech M325: (accel) selected scheme none/0
[181298.841] (**) Logitech M325: (accel) acceleration factor: 2.000
[181298.841] (**) Logitech M325: (accel) acceleration threshold: 4
[181298.842] (II) event19 - Logitech M325: is tagged by udev as: Mouse
[181298.842] (II) event19 - Logitech M325: device set to 600 DPI
[181298.842] (II) event19 - Logitech M325: device is a pointer
[181298.843] (II) config/udev: Adding input device GENERAL WEBCAM: GENERAL WEBCAM (/dev/input/event17)
[181298.843] (**) GENERAL WEBCAM: GENERAL WEBCAM: Applying InputClass "libinput keyboard catchall"
[181298.843] (**) GENERAL WEBCAM: GENERAL WEBCAM: Applying InputClass "system-keyboard"
[181298.843] (II) Using input driver 'libinput' for 'GENERAL WEBCAM: GENERAL WEBCAM'
[181298.843] (**) GENERAL WEBCAM: GENERAL WEBCAM: always reports core events
[181298.843] (**) Option "Device" "/dev/input/event17"
[181298.844] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: is tagged by udev as: Keyboard
[181298.844] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device is a keyboard
[181298.844] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device removed
[181298.910] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input88/event17"
[181298.910] (II) XINPUT: Adding extended input device "GENERAL WEBCAM: GENERAL WEBCAM" (type: KEYBOARD, id 15)
[181298.910] (**) Option "xkb_model" "pc105"
[181298.910] (**) Option "xkb_layout" "es"
[181298.910] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[181298.911] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: is tagged by udev as: Keyboard
[181298.911] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device is a keyboard
[181298.912] (II) config/udev: Adding input device Logitech M325 (/dev/input/event24)
[181298.912] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[181298.912] (II) Using input driver 'libinput' for 'Logitech M325'
[181298.912] (**) Logitech M325: always reports core events
[181298.912] (**) Option "Device" "/dev/input/event24"
[181298.913] (II) event24 - Logitech M325: is tagged by udev as: Mouse
[181298.913] (II) event24 - Logitech M325: device set to 600 DPI
[181298.913] (II) event24 - Logitech M325: device is a pointer
[181298.913] (II) event24 - Logitech M325: device removed
[181298.990] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[181298.990] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[181298.990] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[181298.990] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0017/0003:046D:400A.001A/input/input91/event24"
[181298.990] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 16)
[181298.991] (**) Option "AccelerationScheme" "none"
[181298.991] (**) Logitech M325: (accel) selected scheme none/0
[181298.991] (**) Logitech M325: (accel) acceleration factor: 2.000
[181298.991] (**) Logitech M325: (accel) acceleration threshold: 4
[181298.992] (II) event24 - Logitech M325: is tagged by udev as: Mouse
[181298.992] (II) event24 - Logitech M325: device set to 600 DPI
[181298.992] (II) event24 - Logitech M325: device is a pointer
[181298.993] (II) config/udev: Adding input device Logitech K750 (/dev/input/event18)
[181298.993] (**) Logitech K750: Applying InputClass "libinput keyboard catchall"
[181298.993] (**) Logitech K750: Applying InputClass "system-keyboard"
[181298.993] (II) Using input driver 'libinput' for 'Logitech K750'
[181298.993] (**) Logitech K750: always reports core events
[181298.993] (**) Option "Device" "/dev/input/event18"
[181298.994] (II) event18 - Logitech K750: is tagged by udev as: Keyboard
[181298.995] (II) event18 - Logitech K750: device is a keyboard
[181298.995] (II) event18 - Logitech K750: device removed
[181299.027] (II) libinput: Logitech K750: needs a virtual subdevice
[181299.027] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0017/0003:046D:4002.0018/input/input89/event18"
[181299.027] (II) XINPUT: Adding extended input device "Logitech K750" (type: MOUSE, id 23)
[181299.027] (**) Option "AccelerationScheme" "none"
[181299.028] (**) Logitech K750: (accel) selected scheme none/0
[181299.028] (**) Logitech K750: (accel) acceleration factor: 2.000
[181299.028] (**) Logitech K750: (accel) acceleration threshold: 4
[181299.029] (II) event18 - Logitech K750: is tagged by udev as: Keyboard
[181299.029] (II) event18 - Logitech K750: device is a keyboard
[181299.029] (**) Logitech K750: Applying InputClass "libinput keyboard catchall"
[181299.029] (**) Logitech K750: Applying InputClass "system-keyboard"
[181299.029] (II) Using input driver 'libinput' for 'Logitech K750'
[181299.029] (**) Logitech K750: always reports core events
[181299.029] (**) Option "Device" "/dev/input/event18"
[181299.029] (II) libinput: Logitech K750: is a virtual subdevice
[181299.029] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.0017/0003:046D:4002.0018/input/input89/event18"
[181299.029] (II) XINPUT: Adding extended input device "Logitech K750" (type: KEYBOARD, id 24)
[181299.029] (**) Option "xkb_model" "pc105"
[181299.029] (**) Option "xkb_layout" "es"
[181299.029] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[181299.253] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[181299.306] (II) modeset(0): EDID vendor "SHP", prod id 5469
[181299.306] (II) modeset(0): Printing DDC gathered Modelines:
[181299.306] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[181299.306] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[181300.090] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[181321.345] (II) config/udev: Adding input device Echo Dot-GR8 (AVRCP) (/dev/input/event29)
[181321.345] (**) Echo Dot-GR8 (AVRCP): Applying InputClass "libinput keyboard catchall"
[181321.345] (**) Echo Dot-GR8 (AVRCP): Applying InputClass "system-keyboard"
[181321.345] (II) Using input driver 'libinput' for 'Echo Dot-GR8 (AVRCP)'
[181321.345] (**) Echo Dot-GR8 (AVRCP): always reports core events
[181321.345] (**) Option "Device" "/dev/input/event29"
[181321.346] (II) event29 - Echo Dot-GR8 (AVRCP): is tagged by udev as: Keyboard
[181321.346] (II) event29 - Echo Dot-GR8 (AVRCP): device is a keyboard
[181321.346] (II) event29 - Echo Dot-GR8 (AVRCP): device removed
[181321.367] (**) Option "config_info" "udev:/sys/devices/virtual/input/input92/event29"
[181321.367] (II) XINPUT: Adding extended input device "Echo Dot-GR8 (AVRCP)" (type: KEYBOARD, id 25)
[181321.367] (**) Option "xkb_model" "pc105"
[181321.367] (**) Option "xkb_layout" "es"
[181321.367] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[181321.368] (II) event29 - Echo Dot-GR8 (AVRCP): is tagged by udev as: Keyboard
[181321.368] (II) event29 - Echo Dot-GR8 (AVRCP): device is a keyboard
[181327.210] (II) event29 - Echo Dot-GR8 (AVRCP): device removed
[181327.247] (II) config/udev: removing device Echo Dot-GR8 (AVRCP)
[181327.251] (II) UnloadModule: "libinput"
[191608.516] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event29)
[191608.516] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[191608.516] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[191608.516] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[191608.517] (**) WH-1000XM4 (AVRCP): always reports core events
[191608.517] (**) Option "Device" "/dev/input/event29"
[191608.518] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[191608.518] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[191608.518] (II) event29 - WH-1000XM4 (AVRCP): device removed
[191608.546] (**) Option "config_info" "udev:/sys/devices/virtual/input/input93/event29"
[191608.546] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 25)
[191608.546] (**) Option "xkb_model" "pc105"
[191608.546] (**) Option "xkb_layout" "es"
[191608.546] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[191608.549] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[191608.549] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[191608.550] (EE) event18 - Logitech K750: client bug: event processing lagging behind by 32ms, your system is too slow
[197355.465] (II) event29 - WH-1000XM4 (AVRCP): device removed
[197355.499] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[197355.503] (II) UnloadModule: "libinput"
[203515.015] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device removed
[203515.129] (II) config/udev: removing device GENERAL WEBCAM: GENERAL WEBCAM
[203515.136] (II) UnloadModule: "libinput"
[203515.334] (II) event18 - Logitech K750: device removed
[203515.368] (II) event19 - Logitech M325: device removed
[203515.451] (II) event24 - Logitech M325: device removed
[203521.310] (WW) modeset(0): hotplug event: connector 330's link-state is BAD, tried resetting the current mode. You may be leftwith a black screen if this fails...
[203521.313] (II) modeset(0): EDID vendor "SHP", prod id 5469
[203521.313] (II) modeset(0): Printing DDC gathered Modelines:
[203521.313] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[203521.313] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[203527.436] (WW) modeset(0): hotplug event: connector 330's link-state is BAD, tried resetting the current mode. You may be leftwith a black screen if this fails...
[203527.438] (II) modeset(0): EDID vendor "SHP", prod id 5469
[203527.438] (II) modeset(0): Printing DDC gathered Modelines:
[203527.438] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[203527.438] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[203527.469] (EE) modeset(0): failed to set mode: No such file or directory
[203527.469] (WW) modeset(0): hotplug event: connector 330's link-state is BAD, tried resetting the current mode. You may be leftwith a black screen if this fails...
[203527.471] (II) modeset(0): EDID vendor "SHP", prod id 5469
[203527.471] (II) modeset(0): Printing DDC gathered Modelines:
[203527.471] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[203527.471] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[203527.503] (II) config/udev: removing device Logitech K750
[203527.507] (II) UnloadModule: "libinput"
[203527.507] (II) config/udev: removing device Logitech K750
[203527.510] (II) UnloadModule: "libinput"
[203527.511] (II) config/udev: removing device Logitech M325
[203527.513] (II) UnloadModule: "libinput"
[203527.513] (II) config/udev: removing device Logitech M325
[203527.515] (II) UnloadModule: "libinput"
[203528.928] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[205205.691] [dix] EventToCore: Not implemented yet
[205205.691] [dix] EventToCore: Not implemented yet
[205206.611] [dix] EventToCore: Not implemented yet
[205206.611] [dix] EventToCore: Not implemented yet
[214842.138] (EE) event10 - PNP0C50:00 06CB:CDAD Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.23.0/touchpad-jumping-cursors.html for details
[221232.028] (II) modeset(0): EDID vendor "SHP", prod id 5469
[221232.029] (II) modeset(0): Printing DDC gathered Modelines:
[221232.029] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[221232.029] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[221232.793] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[221233.818] (II) modeset(0): EDID vendor "SHP", prod id 5469
[221233.818] (II) modeset(0): Printing DDC gathered Modelines:
[221233.818] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[221233.818] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[221234.376] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse3)
[221234.376] (II) No input driver specified, ignoring this device.
[221234.376] (II) This device may have been added with another device file.
[221234.378] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse2)
[221234.378] (II) No input driver specified, ignoring this device.
[221234.378] (II) This device may have been added with another device file.
[221234.435] (II) config/udev: Adding input device Logitech K750 (/dev/input/event18)
[221234.435] (**) Logitech K750: Applying InputClass "libinput keyboard catchall"
[221234.435] (**) Logitech K750: Applying InputClass "system-keyboard"
[221234.435] (II) Using input driver 'libinput' for 'Logitech K750'
[221234.435] (**) Logitech K750: always reports core events
[221234.435] (**) Option "Device" "/dev/input/event18"
[221234.438] (II) event18 - Logitech K750: is tagged by udev as: Keyboard
[221234.438] (II) event18 - Logitech K750: device is a keyboard
[221234.438] (II) event18 - Logitech K750: device removed
[221234.453] (II) libinput: Logitech K750: needs a virtual subdevice
[221234.453] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.001D/0003:046D:4002.001E/input/input99/event18"
[221234.453] (II) XINPUT: Adding extended input device "Logitech K750" (type: MOUSE, id 14)
[221234.453] (**) Option "AccelerationScheme" "none"
[221234.454] (**) Logitech K750: (accel) selected scheme none/0
[221234.454] (**) Logitech K750: (accel) acceleration factor: 2.000
[221234.454] (**) Logitech K750: (accel) acceleration threshold: 4
[221234.455] (II) event18 - Logitech K750: is tagged by udev as: Keyboard
[221234.455] (II) event18 - Logitech K750: device is a keyboard
[221234.456] (**) Logitech K750: Applying InputClass "libinput keyboard catchall"
[221234.456] (**) Logitech K750: Applying InputClass "system-keyboard"
[221234.456] (II) Using input driver 'libinput' for 'Logitech K750'
[221234.456] (**) Logitech K750: always reports core events
[221234.456] (**) Option "Device" "/dev/input/event18"
[221234.456] (II) libinput: Logitech K750: is a virtual subdevice
[221234.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.001D/0003:046D:4002.001E/input/input99/event18"
[221234.456] (II) XINPUT: Adding extended input device "Logitech K750" (type: KEYBOARD, id 15)
[221234.456] (**) Option "xkb_model" "pc105"
[221234.456] (**) Option "xkb_layout" "es"
[221234.456] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[221234.457] (II) config/udev: Adding input device GENERAL WEBCAM: GENERAL WEBCAM (/dev/input/event17)
[221234.457] (**) GENERAL WEBCAM: GENERAL WEBCAM: Applying InputClass "libinput keyboard catchall"
[221234.457] (**) GENERAL WEBCAM: GENERAL WEBCAM: Applying InputClass "system-keyboard"
[221234.457] (II) Using input driver 'libinput' for 'GENERAL WEBCAM: GENERAL WEBCAM'
[221234.457] (**) GENERAL WEBCAM: GENERAL WEBCAM: always reports core events
[221234.457] (**) Option "Device" "/dev/input/event17"
[221234.458] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: is tagged by udev as: Keyboard
[221234.458] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device is a keyboard
[221234.458] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device removed
[221234.533] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input98/event17"
[221234.533] (II) XINPUT: Adding extended input device "GENERAL WEBCAM: GENERAL WEBCAM" (type: KEYBOARD, id 16)
[221234.533] (**) Option "xkb_model" "pc105"
[221234.533] (**) Option "xkb_layout" "es"
[221234.533] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[221234.534] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: is tagged by udev as: Keyboard
[221234.534] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device is a keyboard
[221234.535] (II) config/udev: Adding input device Logitech M325 (/dev/input/event24)
[221234.535] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[221234.535] (II) Using input driver 'libinput' for 'Logitech M325'
[221234.535] (**) Logitech M325: always reports core events
[221234.535] (**) Option "Device" "/dev/input/event24"
[221234.535] (II) event24 - Logitech M325: is tagged by udev as: Mouse
[221234.536] (II) event24 - Logitech M325: device set to 600 DPI
[221234.536] (II) event24 - Logitech M325: device is a pointer
[221234.536] (II) event24 - Logitech M325: device removed
[221234.583] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[221234.583] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[221234.583] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[221234.583] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.001D/0003:046D:400A.0020/input/input101/event24"
[221234.583] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 23)
[221234.583] (**) Option "AccelerationScheme" "none"
[221234.584] (**) Logitech M325: (accel) selected scheme none/0
[221234.584] (**) Logitech M325: (accel) acceleration factor: 2.000
[221234.584] (**) Logitech M325: (accel) acceleration threshold: 4
[221234.585] (II) event24 - Logitech M325: is tagged by udev as: Mouse
[221234.585] (II) event24 - Logitech M325: device set to 600 DPI
[221234.585] (II) event24 - Logitech M325: device is a pointer
[221234.585] (II) config/udev: Adding input device Logitech M325 (/dev/input/event19)
[221234.585] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[221234.585] (II) Using input driver 'libinput' for 'Logitech M325'
[221234.585] (**) Logitech M325: always reports core events
[221234.585] (**) Option "Device" "/dev/input/event19"
[221234.586] (II) event19 - Logitech M325: is tagged by udev as: Mouse
[221234.586] (II) event19 - Logitech M325: device set to 600 DPI
[221234.586] (II) event19 - Logitech M325: device is a pointer
[221234.587] (II) event19 - Logitech M325: device removed
[221234.636] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[221234.636] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[221234.636] (II) libinput: Logitech M325: Step value 0 was provided, libinput Fallback acceleration function is used.
[221234.636] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/0003:046D:C52B.001D/0003:046D:400A.001F/input/input100/event19"
[221234.636] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 24)
[221234.637] (**) Option "AccelerationScheme" "none"
[221234.637] (**) Logitech M325: (accel) selected scheme none/0
[221234.637] (**) Logitech M325: (accel) acceleration factor: 2.000
[221234.637] (**) Logitech M325: (accel) acceleration threshold: 4
[221234.638] (II) event19 - Logitech M325: is tagged by udev as: Mouse
[221234.638] (II) event19 - Logitech M325: device set to 600 DPI
[221234.638] (II) event19 - Logitech M325: device is a pointer
[221234.970] (II) modeset(0): EDID vendor "SHP", prod id 5469
[221234.970] (II) modeset(0): Printing DDC gathered Modelines:
[221234.970] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[221234.970] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[221234.999] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[221235.762] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[227904.732] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event29)
[227904.732] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[227904.732] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[227904.732] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[227904.732] (**) WH-1000XM4 (AVRCP): always reports core events
[227904.732] (**) Option "Device" "/dev/input/event29"
[227904.733] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[227904.733] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[227904.733] (II) event29 - WH-1000XM4 (AVRCP): device removed
[227904.752] (**) Option "config_info" "udev:/sys/devices/virtual/input/input102/event29"
[227904.752] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 25)
[227904.752] (**) Option "xkb_model" "pc105"
[227904.752] (**) Option "xkb_layout" "es"
[227904.752] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[227904.753] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[227904.753] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[228246.776] (II) event29 - WH-1000XM4 (AVRCP): device removed
[228246.799] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[228246.803] (II) UnloadModule: "libinput"
[229165.507] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event29)
[229165.507] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[229165.507] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[229165.507] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[229165.507] (**) WH-1000XM4 (AVRCP): always reports core events
[229165.507] (**) Option "Device" "/dev/input/event29"
[229165.507] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[229165.507] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[229165.508] (II) event29 - WH-1000XM4 (AVRCP): device removed
[229165.529] (**) Option "config_info" "udev:/sys/devices/virtual/input/input103/event29"
[229165.529] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 25)
[229165.529] (**) Option "xkb_model" "pc105"
[229165.529] (**) Option "xkb_layout" "es"
[229165.529] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[229165.532] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[229165.532] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[230674.649] (II) event29 - WH-1000XM4 (AVRCP): device removed
[230674.665] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[230674.669] (II) UnloadModule: "libinput"
[234547.528] (II) config/udev: Adding input device WH-1000XM4 (AVRCP) (/dev/input/event29)
[234547.528] (**) WH-1000XM4 (AVRCP): Applying InputClass "libinput keyboard catchall"
[234547.528] (**) WH-1000XM4 (AVRCP): Applying InputClass "system-keyboard"
[234547.528] (II) Using input driver 'libinput' for 'WH-1000XM4 (AVRCP)'
[234547.528] (**) WH-1000XM4 (AVRCP): always reports core events
[234547.528] (**) Option "Device" "/dev/input/event29"
[234547.529] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[234547.529] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[234547.529] (II) event29 - WH-1000XM4 (AVRCP): device removed
[234547.558] (**) Option "config_info" "udev:/sys/devices/virtual/input/input104/event29"
[234547.558] (II) XINPUT: Adding extended input device "WH-1000XM4 (AVRCP)" (type: KEYBOARD, id 25)
[234547.558] (**) Option "xkb_model" "pc105"
[234547.558] (**) Option "xkb_layout" "es"
[234547.558] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[234547.560] (II) event29 - WH-1000XM4 (AVRCP): is tagged by udev as: Keyboard
[234547.560] (II) event29 - WH-1000XM4 (AVRCP): device is a keyboard
[237909.290] (II) modeset(0): EDID vendor "SHP", prod id 5469
[237909.290] (II) modeset(0): Printing DDC gathered Modelines:
[237909.290] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[237909.290] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[238249.929] (II) modeset(0): EDID vendor "SHP", prod id 5469
[238249.929] (II) modeset(0): Printing DDC gathered Modelines:
[238249.929] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[238249.929] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[241088.744] (II) event29 - WH-1000XM4 (AVRCP): device removed
[241088.774] (II) config/udev: removing device WH-1000XM4 (AVRCP)
[241088.780] (II) UnloadModule: "libinput"
[244138.029] (II) event17 - GENERAL WEBCAM: GENERAL WEBCAM: device removed
[244138.188] (II) config/udev: removing device GENERAL WEBCAM: GENERAL WEBCAM
[244138.197] (II) UnloadModule: "libinput"
[244138.417] (II) event18 - Logitech K750: device removed
[244138.444] (II) event19 - Logitech M325: device removed
[244138.514] (II) event24 - Logitech M325: device removed
[244144.375] (WW) modeset(0): hotplug event: connector 330's link-state is BAD, tried resetting the current mode. You may be leftwith a black screen if this fails...
[244144.379] (II) modeset(0): EDID vendor "SHP", prod id 5469
[244144.379] (II) modeset(0): Printing DDC gathered Modelines:
[244144.379] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[244144.379] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[244149.680] (EE) event10 - PNP0C50:00 06CB:CDAD Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.23.0/touchpad-jumping-cursors.html for details
[244150.524] (WW) modeset(0): hotplug event: connector 330's link-state is BAD, tried resetting the current mode. You may be leftwith a black screen if this fails...
[244150.527] (II) modeset(0): EDID vendor "SHP", prod id 5469
[244150.527] (II) modeset(0): Printing DDC gathered Modelines:
[244150.527] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[244150.527] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[244150.558] (EE) modeset(0): failed to set mode: No such file or directory
[244150.558] (WW) modeset(0): hotplug event: connector 330's link-state is BAD, tried resetting the current mode. You may be leftwith a black screen if this fails...
[244150.561] (II) modeset(0): EDID vendor "SHP", prod id 5469
[244150.561] (II) modeset(0): Printing DDC gathered Modelines:
[244150.561] (II) modeset(0): Modeline "1920x1080"x0.0 606.53 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (291.6 kHz eP)
[244150.561] (II) modeset(0): Modeline "1920x1080"x0.0 151.64 1920 1968 2000 2080 1080 1083 1088 1215 -hsync -vsync (72.9 kHz e)
[244150.568] (II) config/udev: removing device Logitech K750
[244150.573] (II) UnloadModule: "libinput"
[244150.573] (II) config/udev: removing device Logitech K750
[244150.577] (II) UnloadModule: "libinput"
[244150.577] (II) config/udev: removing device Logitech M325
[244150.580] (II) UnloadModule: "libinput"
[244150.581] (II) config/udev: removing device Logitech M325
[244150.584] (II) UnloadModule: "libinput"
[244152.054] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[244506.956] (II) config/udev: Adding input device Logitech Wireless Mouse (/dev/input/mouse2)
[244506.956] (II) No input driver specified, ignoring this device.
[244506.956] (II) This device may have been added with another device file.
[244507.013] (II) config/udev: Adding input device Logitech Wireless Mouse (/dev/input/event17)
[244507.013] (**) Logitech Wireless Mouse: Applying InputClass "libinput pointer catchall"
[244507.013] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse'
[244507.013] (**) Logitech Wireless Mouse: always reports core events
[244507.013] (**) Option "Device" "/dev/input/event17"
[244507.014] (II) event17 - Logitech Wireless Mouse: is tagged by udev as: Mouse
[244507.014] (II) event17 - Logitech Wireless Mouse: device is a pointer
[244507.015] (II) event17 - Logitech Wireless Mouse: device removed
[244507.054] (II) libinput: Logitech Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[244507.054] (II) libinput: Logitech Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[244507.054] (II) libinput: Logitech Wireless Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[244507.054] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:046D:C534.0022/0003:046D:4054.0023/input/input107/event17"
[244507.054] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse" (type: MOUSE, id 14)
[244507.054] (**) Option "AccelerationScheme" "none"
[244507.055] (**) Logitech Wireless Mouse: (accel) selected scheme none/0
[244507.055] (**) Logitech Wireless Mouse: (accel) acceleration factor: 2.000
[244507.055] (**) Logitech Wireless Mouse: (accel) acceleration threshold: 4
[244507.055] (II) event17 - Logitech Wireless Mouse: is tagged by udev as: Mouse
[244507.056] (II) event17 - Logitech Wireless Mouse: device is a pointer
[245449.549] [dix] EventToCore: Not implemented yet
[245449.549] [dix] EventToCore: Not implemented yet And this is the output of `sudo journalctl -b -1 | curl -F 'file=@-' 0x0.st`: http://0x0.st/HZTj.txt
Offline
#5 2023-05-05 15:24:54
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,337
Re: Annoying message about monitors when laptop heats up
The posted journal doesn't include the nvidia GPU at all (esp. not the error in #2)
As noted "-b -1" was just an example on how to select the previous boot.
Likewise the nvidia chip doesn't show up in the xorg journal.
If you can, disable the GPU in the BIOS/UEFI
Offline
#6 2023-05-05 15:31:22
- karlospv94
- Member
- Registered: 2016-10-12
- Posts: 101
Re: Annoying message about monitors when laptop heats up
Sorry, this is the correct 0.0.st, which includes the day of today: https://0x0.st/HZTJ.txt. I check if I can disable the GPU from the BIOS later, thanks for the suggestion
Offline
#7 2023-05-05 19:25:38
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,337
Re: Annoying message about monitors when laptop heats up
Is that really a 25MB journal of a single boot starting April 25th?
Edit: seems triggered by ksysguard
systemd[1457]: Started KSysGuard - Monitor del sistema.is immediately ahead of the three instances of
nvidia: probe of 0000:01:00.0 failed with error -1So ksysguard is likely configured to monitor the nvidia GPU (or defaults to that because the PCI device is present) and it's attempted inquiry collides w/ the bbswitch/acpi_call deactivation of the device.
Last edited by seth (2023-05-05 21:09:03)
Offline