[SOLVED] Continuous kernel oops when starting up

code_xpert · 2023-05-27 09:47:22

Hello,

This is my first time posting on the Arch Linux forum so please move my topic if it is not in the right place.

I have been facing kernel oopses for months now, where only a simple switch to a TTY, a login, and a reboot would fix this.
Kernel oopses happen only when powering on my pc from when it is off, (almost) never from reboot.

I used dmesg, and this was the output:

[    0.000000] Linux version 6.3.1-arch1-1 (linux@archlinux) (gcc (GCC) 13.1.1 20230429, GNU ld (GNU Binutils) 2.40.0) #1 SMP PREEMPT_DYNAMIC Mon, 01 May 2023 17:42:39 +0000
[    0.000000] Command line: initrd=\initramfs-linux.img root=UUID=982918cf-e528-4e31-a4b5-cbaba7ac5d42 rw quiet loglevel=3 nvidia-drm.modeset=1 modprobe.blacklist=nouveau nowatchdog mitigations=off
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040400000-0x0000000086b58fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000086b59000-0x0000000086b59fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000086b5a000-0x0000000086b5afff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000086b5b000-0x000000008e10efff] usable
[    0.000000] BIOS-e820: [mem 0x000000008e10f000-0x000000008e58efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008e58f000-0x000000008e61efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008e61f000-0x000000008eb1efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008eb1f000-0x000000008f6fefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008f6ff000-0x000000008f6fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008f700000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x8676e018-0x8678dc57] usable ==> usable
[    0.000000] e820: update [mem 0x8676e018-0x8678dc57] usable ==> usable
[    0.000000] e820: update [mem 0x8675d018-0x8676de57] usable ==> usable
[    0.000000] e820: update [mem 0x8675d018-0x8676de57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000040400000-0x000000008675d017] usable
[    0.000000] reserve setup_data: [mem 0x000000008675d018-0x000000008676de57] usable
[    0.000000] reserve setup_data: [mem 0x000000008676de58-0x000000008676e017] usable
[    0.000000] reserve setup_data: [mem 0x000000008676e018-0x000000008678dc57] usable
[    0.000000] reserve setup_data: [mem 0x000000008678dc58-0x0000000086b58fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000086b59000-0x0000000086b59fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000086b5a000-0x0000000086b5afff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000086b5b000-0x000000008e10efff] usable
[    0.000000] reserve setup_data: [mem 0x000000008e10f000-0x000000008e58efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008e58f000-0x000000008e61efff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000008e61f000-0x000000008eb1efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000008eb1f000-0x000000008f6fefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008f6ff000-0x000000008f6fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000008f700000-0x000000008fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000046dffffff] usable
[    0.000000] efi: EFI v2.7 by American Megatrends
[    0.000000] efi: ACPI 2.0=0x8ea80000 ACPI=0x8ea80000 SMBIOS=0x8f43a000 MEMATTR=0x8b415018 ESRT=0x89dd0c18 INITRD=0x8678ff98 RNG=0x8e61e018 
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem46: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[    0.000000] efi: Not removing mem47: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem48: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem49: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem50: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. MS-7B22/B360 GAMING PLUS (MS-7B22), BIOS 2.C0 10/14/2020
[    0.000000] tsc: Detected 2800.000 MHz processor
[    0.000000] tsc: Detected 2799.927 MHz TSC
[    0.000790] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000793] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000802] last_pfn = 0x46e000 max_arch_pfn = 0x400000000
[    0.000807] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001085] last_pfn = 0x8f700 max_arch_pfn = 0x400000000
[    0.003333] esrt: Reserving ESRT space from 0x0000000089dd0c18 to 0x0000000089dd0c50.
[    0.003333] e820: update [mem 0x89dd0000-0x89dd0fff] usable ==> reserved
[    0.003333] Kernel/User page tables isolation: disabled on command line.
[    0.003333] Using GB pages for direct mapping
[    0.003333] Secure boot disabled
[    0.003333] RAMDISK: [mem 0x7f7a2000-0x7fffffff]
[    0.003333] ACPI: Early table checksum verification disabled
[    0.003333] ACPI: RSDP 0x000000008EA80000 000024 (v02 ALASKA)
[    0.003333] ACPI: XSDT 0x000000008EA800A0 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.003333] ACPI: FACP 0x000000008EAC1128 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.003333] ACPI: DSDT 0x000000008EA80200 040F26 (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.003333] ACPI: FACS 0x000000008EB1E080 000040
[    0.003333] ACPI: APIC 0x000000008EAC1240 0000A0 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.003333] ACPI: FPDT 0x000000008EAC12E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.003333] ACPI: FIDT 0x000000008EAC1328 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.003333] ACPI: MCFG 0x000000008EAC13C8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.003333] ACPI: SSDT 0x000000008EAC1408 001B60 (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.003333] ACPI: SSDT 0x000000008EAC2F68 0031C6 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.003333] ACPI: SSDT 0x000000008EAC6130 002710 (v02 PegSsd PegSsdt  00001000 INTL 20160527)
[    0.003333] ACPI: HPET 0x000000008EAC8840 000038 (v01 ALASKA A M I    00000002      01000013)
[    0.003333] ACPI: SSDT 0x000000008EAC8878 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
[    0.003333] ACPI: SSDT 0x000000008EAC9828 002FD0 (v02 INTEL  xh_cfsd4 00000000 INTL 20160527)
[    0.003333] ACPI: UEFI 0x000000008EACC7F8 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.003333] ACPI: LPIT 0x000000008EACC840 000094 (v01 ALASKA A M I    00000002      01000013)
[    0.003333] ACPI: SSDT 0x000000008EACC8D8 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527)
[    0.003333] ACPI: SSDT 0x000000008EACF0B8 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
[    0.003333] ACPI: DBGP 0x000000008EAD05A0 000034 (v01 ALASKA A M I    00000002      01000013)
[    0.003333] ACPI: DBG2 0x000000008EAD05D8 000054 (v00 ALASKA A M I    00000002      01000013)
[    0.003333] ACPI: SSDT 0x000000008EAD0630 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
[    0.003333] ACPI: SSDT 0x000000008EAD2198 000144 (v02 Intel  ADebTabl 00001000 INTL 20160527)
[    0.003333] ACPI: WSMT 0x000000008EAD22E0 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.003333] ACPI: Reserving FACP table memory at [mem 0x8eac1128-0x8eac123b]
[    0.003333] ACPI: Reserving DSDT table memory at [mem 0x8ea80200-0x8eac1125]
[    0.003333] ACPI: Reserving FACS table memory at [mem 0x8eb1e080-0x8eb1e0bf]
[    0.003333] ACPI: Reserving APIC table memory at [mem 0x8eac1240-0x8eac12df]
[    0.003333] ACPI: Reserving FPDT table memory at [mem 0x8eac12e0-0x8eac1323]
[    0.003333] ACPI: Reserving FIDT table memory at [mem 0x8eac1328-0x8eac13c3]
[    0.003333] ACPI: Reserving MCFG table memory at [mem 0x8eac13c8-0x8eac1403]
[    0.003333] ACPI: Reserving SSDT table memory at [mem 0x8eac1408-0x8eac2f67]
[    0.003333] ACPI: Reserving SSDT table memory at [mem 0x8eac2f68-0x8eac612d]
[    0.003333] ACPI: Reserving SSDT table memory at [mem 0x8eac6130-0x8eac883f]
[    0.003333] ACPI: Reserving HPET table memory at [mem 0x8eac8840-0x8eac8877]
[    0.003333] ACPI: Reserving SSDT table memory at [mem 0x8eac8878-0x8eac9825]
[    0.003333] ACPI: Reserving SSDT table memory at [mem 0x8eac9828-0x8eacc7f7]
[    0.003333] ACPI: Reserving UEFI table memory at [mem 0x8eacc7f8-0x8eacc839]
[    0.003333] ACPI: Reserving LPIT table memory at [mem 0x8eacc840-0x8eacc8d3]
[    0.003333] ACPI: Reserving SSDT table memory at [mem 0x8eacc8d8-0x8eacf0b5]
[    0.003333] ACPI: Reserving SSDT table memory at [mem 0x8eacf0b8-0x8ead0599]
[    0.003333] ACPI: Reserving DBGP table memory at [mem 0x8ead05a0-0x8ead05d3]
[    0.003333] ACPI: Reserving DBG2 table memory at [mem 0x8ead05d8-0x8ead062b]
[    0.003333] ACPI: Reserving SSDT table memory at [mem 0x8ead0630-0x8ead2196]
[    0.003333] ACPI: Reserving SSDT table memory at [mem 0x8ead2198-0x8ead22db]
[    0.003333] ACPI: Reserving WSMT table memory at [mem 0x8ead22e0-0x8ead2307]
[    0.003333] No NUMA configuration found
[    0.003333] Faking a node at [mem 0x0000000000000000-0x000000046dffffff]
[    0.003333] NODE_DATA(0) allocated [mem 0x46dffb000-0x46dffffff]
[    0.003333] Zone ranges:
[    0.003333]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.003333]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.003333]   Normal   [mem 0x0000000100000000-0x000000046dffffff]
[    0.003333]   Device   empty
[    0.003333] Movable zone start for each node
[    0.003333] Early memory node ranges
[    0.003333]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.003333]   node   0: [mem 0x0000000000100000-0x000000003fffffff]
[    0.003333]   node   0: [mem 0x0000000040400000-0x0000000086b58fff]
[    0.003333]   node   0: [mem 0x0000000086b5b000-0x000000008e10efff]
[    0.003333]   node   0: [mem 0x000000008f6ff000-0x000000008f6fffff]
[    0.003333]   node   0: [mem 0x0000000100000000-0x000000046dffffff]
[    0.003333] Initmem setup node 0 [mem 0x0000000000001000-0x000000046dffffff]
[    0.003333] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003333] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.003333] On node 0, zone DMA32: 1024 pages in unavailable ranges
[    0.003333] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.003333] On node 0, zone DMA32: 5616 pages in unavailable ranges
[    0.003333] On node 0, zone Normal: 2304 pages in unavailable ranges
[    0.003333] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.003333] ACPI: PM-Timer IO Port: 0x1808
[    0.003333] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.003333] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.003333] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.003333] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.003333] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.003333] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.003333] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.003333] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.003333] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.003333] TSC deadline timer available
[    0.003333] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x8675d000-0x8675dfff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x8676d000-0x8676dfff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x8676e000-0x8676efff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x8678d000-0x8678dfff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x86b59000-0x86b59fff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x86b5a000-0x86b5afff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x89dd0000-0x89dd0fff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x8e10f000-0x8e58efff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x8e58f000-0x8e61efff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x8e61f000-0x8eb1efff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x8eb1f000-0x8f6fefff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x8f700000-0x8fffffff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfdffffff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.003333] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.003333] [mem 0x90000000-0xfdffffff] available for PCI devices
[    0.003333] Booting paravirtualized kernel on bare hardware
[    0.003333] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.003333] setup_percpu: NR_CPUS:320 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
[    0.003333] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.003333] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.003333] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
[    0.003333] Fallback order for Node 0: 0 
[    0.003333] Built 1 zonelists, mobility grouping on.  Total pages: 4111641
[    0.003333] Policy zone: Normal
[    0.003333] Kernel command line: initrd=\initramfs-linux.img root=UUID=982918cf-e528-4e31-a4b5-cbaba7ac5d42 rw quiet loglevel=3 nvidia-drm.modeset=1 modprobe.blacklist=nouveau nowatchdog mitigations=off
[    0.003333] Unknown kernel command line parameters "initrd=\initramfs-linux.img", will be passed to user space.
[    0.003333] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.003333] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.003333] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.003333] software IO TLB: area num 8.
[    0.003333] Memory: 16225912K/16708272K available (16384K kernel code, 2107K rwdata, 12652K rodata, 3324K init, 4000K bss, 482100K reserved, 0K cma-reserved)
[    0.003333] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.003333] ftrace: allocating 47278 entries in 185 pages
[    0.003333] ftrace: allocated 185 pages with 5 groups
[    0.003333] Dynamic Preempt: full
[    0.003333] rcu: Preemptible hierarchical RCU implementation.
[    0.003333] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=6.
[    0.003333] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.003333] 	Trampoline variant of Tasks RCU enabled.
[    0.003333] 	Rude variant of Tasks RCU enabled.
[    0.003333] 	Tracing variant of Tasks RCU enabled.
[    0.003333] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.003333] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.003333] NR_IRQS: 20736, nr_irqs: 1536, preallocated irqs: 16
[    0.003333] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.003333] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.003333] Console: colour dummy device 80x25
[    0.003333] printk: console [tty0] enabled
[    0.003333] ACPI: Core revision 20221020
[    0.003333] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.003333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285bfbafad2, max_idle_ns: 440795215530 ns
[    0.118008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.18 BogoMIPS (lpj=9333090)
[    0.118011] pid_max: default: 32768 minimum: 301
[    0.120628] LSM: initializing lsm=capability,landlock,lockdown,yama,integrity,bpf
[    0.120641] landlock: Up and running.
[    0.120642] Yama: becoming mindful.
[    0.120649] LSM support for eBPF active
[    0.120682] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.120705] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.120898] x86/cpu: SGX disabled by BIOS.
[    0.120903] CPU0: Thermal monitoring enabled (TM1)
[    0.120950] process: using mwait in idle threads
[    0.120953] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.120954] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.120958] Spectre V2 : User space: Vulnerable
[    0.120959] Speculative Store Bypass: Vulnerable
[    0.120963] SRBDS: Vulnerable
[    0.141382] Freeing SMP alternatives memory: 40K
[    0.141665] smpboot: CPU0: Intel(R) Core(TM) i5-8400 CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[    0.141786] cblist_init_generic: Setting adjustable number of callback queues.
[    0.141788] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.141800] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.141812] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.141822] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.141842] ... version:                4
[    0.141843] ... bit width:              48
[    0.141843] ... generic registers:      8
[    0.141844] ... value mask:             0000ffffffffffff
[    0.141845] ... max period:             00007fffffffffff
[    0.141846] ... fixed-purpose events:   3
[    0.141846] ... event mask:             00000007000000ff
[    0.141951] Estimated ratio of average max frequency by base frequency (times 1024): 1426
[    0.141968] rcu: Hierarchical SRCU implementation.
[    0.141968] rcu: 	Max phase no-delay instances is 1000.
[    0.142428] smp: Bringing up secondary CPUs ...
[    0.142507] x86: Booting SMP configuration:
[    0.142508] .... node  #0, CPUs:      #1 #2 #3 #4 #5
[    0.144855] smp: Brought up 1 node, 6 CPUs
[    0.144855] smpboot: Max logical packages: 1
[    0.144855] smpboot: Total of 6 processors activated (33612.08 BogoMIPS)
[    0.146223] devtmpfs: initialized
[    0.146223] x86/mm: Memory block size: 128MB
[    0.146223] ACPI: PM: Registering ACPI NVS region [mem 0x86b59000-0x86b59fff] (4096 bytes)
[    0.146223] ACPI: PM: Registering ACPI NVS region [mem 0x8e61f000-0x8eb1efff] (5242880 bytes)
[    0.146223] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.146223] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.146223] pinctrl core: initialized pinctrl subsystem
[    0.148248] PM: RTC time: 07:18:40, date: 2023-05-27
[    0.148594] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.148796] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.148910] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.149034] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.149046] audit: initializing netlink subsys (disabled)
[    0.149082] audit: type=2000 audit(1685171920.049:1): state=initialized audit_enabled=0 res=1
[    0.149161] thermal_sys: Registered thermal governor 'fair_share'
[    0.149162] thermal_sys: Registered thermal governor 'bang_bang'
[    0.149163] thermal_sys: Registered thermal governor 'step_wise'
[    0.149164] thermal_sys: Registered thermal governor 'user_space'
[    0.149165] thermal_sys: Registered thermal governor 'power_allocator'
[    0.149188] cpuidle: using governor ladder
[    0.149188] cpuidle: using governor menu
[    0.149188] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.149188] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.149188] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.149188] PCI: not using MMCONFIG
[    0.149188] PCI: Using configuration type 1 for base access
[    0.149188] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.151384] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.151384] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.151384] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.151384] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.151486] ACPI: Added _OSI(Module Device)
[    0.151486] ACPI: Added _OSI(Processor Device)
[    0.151486] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.151486] ACPI: Added _OSI(Processor Aggregator Device)
[    0.231027] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.237068] ACPI: Dynamic OEM Table Load:
[    0.237068] ACPI: SSDT 0xFFFF93BBC0D86E00 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.238424] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.240206] ACPI: Dynamic OEM Table Load:
[    0.240211] ACPI: SSDT 0xFFFF93BBC123AC00 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.241257] ACPI: Dynamic OEM Table Load:
[    0.241261] ACPI: SSDT 0xFFFF93BBC1287800 0005C3 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.242706] ACPI: Dynamic OEM Table Load:
[    0.242711] ACPI: SSDT 0xFFFF93BBC1282000 0005FC (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.243824] ACPI: Dynamic OEM Table Load:
[    0.243828] ACPI: SSDT 0xFFFF93BBC1238000 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.244961] ACPI: Dynamic OEM Table Load:
[    0.244966] ACPI: SSDT 0xFFFF93BBC127A000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.246634] ACPI: Dynamic OEM Table Load:
[    0.246639] ACPI: SSDT 0xFFFF93BBC123A800 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.251785] ACPI: Interpreter enabled
[    0.251830] ACPI: PM: (supports S0 S3 S4 S5)
[    0.251831] ACPI: Using IOAPIC for interrupt routing
[    0.253141] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.255093] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[    0.255108] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.255109] PCI: Using E820 reservations for host bridge windows
[    0.256496] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.272584] ACPI: \_SB_.PCI0.XDCI.USBC: New power resource
[    0.275544] ACPI: \_SB_.PCI0.SAT0.VOL0.V0PR: New power resource
[    0.275993] ACPI: \_SB_.PCI0.SAT0.VOL1.V1PR: New power resource
[    0.276437] ACPI: \_SB_.PCI0.SAT0.VOL2.V2PR: New power resource
[    0.282979] ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
[    0.286350] ACPI: \_TZ_.FN00: New power resource
[    0.286421] ACPI: \_TZ_.FN01: New power resource
[    0.286489] ACPI: \_TZ_.FN02: New power resource
[    0.286556] ACPI: \_TZ_.FN03: New power resource
[    0.286623] ACPI: \_TZ_.FN04: New power resource
[    0.287143] ACPI: \PIN_: New power resource
[    0.287591] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.287599] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.287718] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[    0.287936] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR DPC]
[    0.287937] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.289125] PCI host bridge to bus 0000:00
[    0.289127] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.289129] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.289131] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[    0.289133] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.289135] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.289136] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.289137] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.289237] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[    0.289305] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.289345] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.289932] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.289940] pci 0000:00:08.0: reg 0x10: [mem 0x401211a000-0x401211afff 64bit]
[    0.290058] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[    0.290074] pci 0000:00:12.0: reg 0x10: [mem 0x4012119000-0x4012119fff 64bit]
[    0.290226] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    0.290241] pci 0000:00:14.0: reg 0x10: [mem 0x4012100000-0x401210ffff 64bit]
[    0.290301] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.292275] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    0.292292] pci 0000:00:14.2: reg 0x10: [mem 0x4012114000-0x4012115fff 64bit]
[    0.292302] pci 0000:00:14.2: reg 0x18: [mem 0x4012118000-0x4012118fff 64bit]
[    0.292419] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    0.292438] pci 0000:00:16.0: reg 0x10: [mem 0x4012117000-0x4012117fff 64bit]
[    0.292512] pci 0000:00:16.0: PME# supported from D3hot
[    0.293082] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[    0.293094] pci 0000:00:17.0: reg 0x10: [mem 0x91120000-0x91121fff]
[    0.293101] pci 0000:00:17.0: reg 0x14: [mem 0x91123000-0x911230ff]
[    0.293108] pci 0000:00:17.0: reg 0x18: [io  0x4050-0x4057]
[    0.293115] pci 0000:00:17.0: reg 0x1c: [io  0x4040-0x4043]
[    0.293121] pci 0000:00:17.0: reg 0x20: [io  0x4020-0x403f]
[    0.293128] pci 0000:00:17.0: reg 0x24: [mem 0x91122000-0x911227ff]
[    0.293166] pci 0000:00:17.0: PME# supported from D3hot
[    0.293566] pci 0000:00:1f.0: [8086:a308] type 00 class 0x060100
[    0.294009] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[    0.294038] pci 0000:00:1f.3: reg 0x10: [mem 0x4012110000-0x4012113fff 64bit]
[    0.294076] pci 0000:00:1f.3: reg 0x20: [mem 0x4012000000-0x40120fffff 64bit]
[    0.294151] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.298052] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    0.298075] pci 0000:00:1f.4: reg 0x10: [mem 0x4012116000-0x40121160ff 64bit]
[    0.298103] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.298394] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    0.298408] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.298521] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
[    0.298545] pci 0000:00:1f.6: reg 0x10: [mem 0x91100000-0x9111ffff]
[    0.298674] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.298781] pci 0000:01:00.0: [10de:1b82] type 00 class 0x030000
[    0.298792] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x90ffffff]
[    0.298802] pci 0000:01:00.0: reg 0x14: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.298812] pci 0000:01:00.0: reg 0x1c: [mem 0x4010000000-0x4011ffffff 64bit pref]
[    0.298818] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.298824] pci 0000:01:00.0: reg 0x30: [mem 0x91000000-0x9107ffff pref]
[    0.298845] pci 0000:01:00.0: BAR 1: assigned to efifb
[    0.298850] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.298922] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.299000] pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
[    0.299010] pci 0000:01:00.1: reg 0x10: [mem 0x91080000-0x91083fff]
[    0.299128] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.299130] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.299132] pci 0000:00:01.0:   bridge window [mem 0x90000000-0x910fffff]
[    0.299135] pci 0000:00:01.0:   bridge window [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.300943] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.301034] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.301123] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.301211] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.301298] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.301389] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.301477] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.301565] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.309255] iommu: Default domain type: Translated 
[    0.309255] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.309255] SCSI subsystem initialized
[    0.309255] libata version 3.00 loaded.
[    0.309255] ACPI: bus type USB registered
[    0.309255] usbcore: registered new interface driver usbfs
[    0.309255] usbcore: registered new interface driver hub
[    0.309255] usbcore: registered new device driver usb
[    0.309255] pps_core: LinuxPPS API ver. 1 registered
[    0.309255] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.309255] PTP clock support registered
[    0.309255] EDAC MC: Ver: 3.0.0
[    0.309255] efivars: Registered efivars operations
[    0.311520] NetLabel: Initializing
[    0.311521] NetLabel:  domain hash size = 128
[    0.311522] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.311538] NetLabel:  unlabeled traffic allowed by default
[    0.311542] mctp: management component transport protocol core
[    0.311543] NET: Registered PF_MCTP protocol family
[    0.311546] PCI: Using ACPI for IRQ routing
[    0.356048] PCI: pci_cache_line_size set to 64 bytes
[    0.356110] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.356128] e820: reserve RAM buffer [mem 0x8675d018-0x87ffffff]
[    0.356130] e820: reserve RAM buffer [mem 0x8676e018-0x87ffffff]
[    0.356131] e820: reserve RAM buffer [mem 0x86b59000-0x87ffffff]
[    0.356132] e820: reserve RAM buffer [mem 0x89dd0000-0x8bffffff]
[    0.356133] e820: reserve RAM buffer [mem 0x8e10f000-0x8fffffff]
[    0.356134] e820: reserve RAM buffer [mem 0x8f700000-0x8fffffff]
[    0.356135] e820: reserve RAM buffer [mem 0x46e000000-0x46fffffff]
[    0.356165] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.356165] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.356165] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.356165] vgaarb: loaded
[    0.356165] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.356165] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.358045] clocksource: Switched to clocksource tsc-early
[    0.358133] VFS: Disk quotas dquot_6.6.0
[    0.358143] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.358200] pnp: PnP ACPI init
[    0.358279] system 00:00: [mem 0x40000000-0x403fffff] has been reserved
[    0.358587] system 00:01: [io  0x0a00-0x0a0f] has been reserved
[    0.358589] system 00:01: [io  0x0a10-0x0a1f] has been reserved
[    0.358591] system 00:01: [io  0x0a20-0x0a2f] has been reserved
[    0.358592] system 00:01: [io  0x0a30-0x0a3f] has been reserved
[    0.359147] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.359150] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.359278] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.359462] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.359465] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.359467] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.359468] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.359470] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.359471] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.359473] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.359475] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.359732] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.359735] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.359737] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.359738] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.359740] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.359742] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.359743] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.360098] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.360403] system 00:07: [mem 0xfd6e0000-0xfd6effff] has been reserved
[    0.360405] system 00:07: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[    0.360408] system 00:07: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[    0.360409] system 00:07: [mem 0xfd6a0000-0xfd6affff] has been reserved
[    0.362673] pnp: PnP ACPI: found 9 devices
[    0.368056] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.368111] NET: Registered PF_INET protocol family
[    0.368247] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.371096] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.371122] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.371181] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.371396] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.371635] TCP: Hash tables configured (established 131072 bind 65536)
[    0.371706] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.371750] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.371790] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.371838] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.371843] NET: Registered PF_XDP protocol family
[    0.371850] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.371854] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.371856] pci 0000:00:01.0:   bridge window [mem 0x90000000-0x910fffff]
[    0.371859] pci 0000:00:01.0:   bridge window [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.371863] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.371864] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.371866] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
[    0.371867] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.371868] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    0.371870] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[    0.371871] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.371872] pci_bus 0000:01: resource 1 [mem 0x90000000-0x910fffff]
[    0.371873] pci_bus 0000:01: resource 2 [mem 0x4000000000-0x4011ffffff 64bit pref]
[    0.372331] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.372367] PCI: CLS 64 bytes, default 64
[    0.372372] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.372372] software IO TLB: mapped [mem 0x000000008275d000-0x000000008675d000] (64MB)
[    0.372408] Trying to unpack rootfs image as initramfs...
[    0.372452] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.373108] Initialise system trusted keyrings
[    0.373117] Key type blacklist registered
[    0.373148] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.373158] zbud: loaded
[    0.373271] integrity: Platform Keyring initialized
[    0.373274] integrity: Machine keyring initialized
[    0.381331] Key type asymmetric registered
[    0.381333] Asymmetric key parser 'x509' registered
[    0.381351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.381394] io scheduler mq-deadline registered
[    0.381395] io scheduler kyber registered
[    0.381405] io scheduler bfq registered
[    0.381766] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.382165] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.382181] ACPI: button: Sleep Button [SLPB]
[    0.382203] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.382214] ACPI: button: Power Button [PWRB]
[    0.382238] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.384749] ACPI: button: Power Button [PWRF]
[    0.385517] thermal LNXTHERM:00: registered as thermal_zone0
[    0.385520] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.385850] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.386456] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.386503] Freeing initrd memory: 8568K
[    0.387797] Non-volatile memory driver v1.3
[    0.387799] Linux agpgart interface v0.103
[    0.387831] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.387888] ACPI: bus type drm_connector registered
[    0.389836] ahci 0000:00:17.0: version 3.0
[    0.400193] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x3e impl SATA mode
[    0.400198] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst 
[    0.438569] scsi host0: ahci
[    0.438873] scsi host1: ahci
[    0.439164] scsi host2: ahci
[    0.439363] scsi host3: ahci
[    0.439463] scsi host4: ahci
[    0.439581] scsi host5: ahci
[    0.439604] ata1: DUMMY
[    0.439609] ata2: SATA max UDMA/133 abar m2048@0x91122000 port 0x91122180 irq 121
[    0.439611] ata3: SATA max UDMA/133 abar m2048@0x91122000 port 0x91122200 irq 121
[    0.439612] ata4: SATA max UDMA/133 abar m2048@0x91122000 port 0x91122280 irq 121
[    0.439614] ata5: SATA max UDMA/133 abar m2048@0x91122000 port 0x91122300 irq 121
[    0.439615] ata6: SATA max UDMA/133 abar m2048@0x91122000 port 0x91122380 irq 121
[    0.439683] usbcore: registered new interface driver usbserial_generic
[    0.439687] usbserial: USB Serial support registered for generic
[    0.439799] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.440870] rtc_cmos rtc_cmos: registered as rtc0
[    0.441050] rtc_cmos rtc_cmos: setting system clock to 2023-05-27T07:18:40 UTC (1685171920)
[    0.441076] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.441237] intel_pstate: Intel P-state driver initializing
[    0.441493] intel_pstate: Disabling energy efficiency optimization
[    0.441494] intel_pstate: HWP enabled
[    0.441552] ledtrig-cpu: registered to indicate activity on CPUs
[    0.441719] efifb: probing for efifb
[    0.441773] efifb: No BGRT, not showing boot graphics
[    0.441773] efifb: framebuffer at 0x4000000000, using 3072k, total 3072k
[    0.441774] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.441775] efifb: scrolling: redraw
[    0.441776] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.441842] fbcon: Deferring console take-over
[    0.441843] fb0: EFI VGA frame buffer device
[    0.441870] hid: raw HID events driver (C) Jiri Kosina
[    0.441899] intel_pmc_core INT33A1:00:  initialized
[    0.441952] drop_monitor: Initializing network drop monitor service
[    0.450894] Initializing XFRM netlink socket
[    0.450914] NET: Registered PF_INET6 protocol family
[    0.455212] Segment Routing with IPv6
[    0.455213] RPL Segment Routing with IPv6
[    0.455220] In-situ OAM (IOAM) with IPv6
[    0.455237] NET: Registered PF_PACKET protocol family
[    0.455949] microcode: Microcode Update Driver: v2.2.
[    0.455954] IPI shorthand broadcast: enabled
[    0.457037] sched_clock: Marking stable (361274261, 94673906)->(457433869, -1485702)
[    0.457287] registered taskstats version 1
[    0.457710] Loading compiled-in X.509 certificates
[    0.460330] Loaded X.509 cert 'Build time autogenerated kernel key: e5e8ba5904898e912159a39fc7d9c884b51c74b4'
[    0.460925] zswap: loaded using pool zstd/zsmalloc
[    0.462231] Key type .fscrypt registered
[    0.462233] Key type fscrypt-provisioning registered
[    0.463017] PM:   Magic number: 7:36:320
[    0.463020] platform microcode: hash matches
[    0.463037] tty tty45: hash matches
[    0.466299] RAS: Correctable Errors collector initialized.
[    0.751804] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.751950] ata5: SATA link down (SStatus 4 SControl 300)
[    0.752099] ata2: SATA link down (SStatus 4 SControl 300)
[    0.752130] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.752245] ata3: SATA link down (SStatus 4 SControl 300)
[    0.752318] ata4.00: supports DRM functions and may not be fully accessible
[    0.752325] ata4.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT04B6Q, max UDMA/133
[    0.753443] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    0.755919] ata6.00: supports DRM functions and may not be fully accessible
[    0.755926] ata6.00: ATA-11: Samsung SSD 870 EVO 250GB, SVT02B6Q, max UDMA/133
[    0.756574] ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    0.756875] ata4.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    0.757378] ata4.00: supports DRM functions and may not be fully accessible
[    0.759275] ata6.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    0.759895] ata6.00: supports DRM functions and may not be fully accessible
[    0.762133] ata4.00: configured for UDMA/133
[    0.762436] scsi 3:0:0:0: Direct-Access     ATA      Samsung SSD 860  4B6Q PQ: 0 ANSI: 5
[    0.763181] ata6.00: configured for UDMA/133
[    0.763483] scsi 5:0:0:0: Direct-Access     ATA      Samsung SSD 870  2B6Q PQ: 0 ANSI: 5
[    0.763498] ata4.00: Enabling discard_zeroes_data
[    0.763590] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    0.763684] sd 3:0:0:0: [sda] Write Protect is off
[    0.763694] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.763873] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.763964] ata6.00: Enabling discard_zeroes_data
[    0.763989] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    0.764008] sd 5:0:0:0: [sdb] Write Protect is off
[    0.764013] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.764037] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.764085] sd 5:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[    0.764261] sd 3:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    0.764586] ata6.00: Enabling discard_zeroes_data
[    0.764851] ata4.00: Enabling discard_zeroes_data
[    0.779890]  sdb: sdb1 sdb2
[    0.781146] sd 5:0:0:0: [sdb] supports TCG Opal
[    0.781154] sd 5:0:0:0: [sdb] Attached SCSI disk
[    0.791040]  sda: sda1 sda2 sda3
[    0.792573] sd 3:0:0:0: [sda] supports TCG Opal
[    0.792581] sd 3:0:0:0: [sda] Attached SCSI disk
[    0.795639] Freeing unused decrypted memory: 2036K
[    0.796729] Freeing unused kernel image (initmem) memory: 3324K
[    0.811446] Write protecting the kernel read-only data: 30720k
[    0.812530] Freeing unused kernel image (rodata/data gap) memory: 1684K
[    0.852138] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.852144] rodata_test: all tests were successful
[    0.852150] Run /init as init process
[    0.852152]   with arguments:
[    0.852154]     /init
[    0.852155]   with environment:
[    0.852157]     HOME=/
[    0.852158]     TERM=linux
[    0.852159]     initrd=\initramfs-linux.img
[    0.954061] usbcore: registered new interface driver usbhid
[    0.954064] usbhid: USB HID core driver
[    0.987387] fbcon: Taking over console
[    0.987428] Console: switching to colour frame buffer device 128x48
[    1.005231] EXT4-fs (sda2): mounted filesystem 982918cf-e528-4e31-a4b5-cbaba7ac5d42 with ordered data mode. Quota mode: none.
[    1.147375] systemd[1]: systemd 253.4-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    1.147382] systemd[1]: Detected architecture x86-64.
[    1.148428] systemd[1]: Hostname set to <linuxboi>.
[    1.333788] systemd[1]: bpf-lsm: LSM BPF program attached
[    1.334054] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'systemd'
[    1.374702] tsc: Refined TSC clocksource calibration: 2807.999 MHz
[    1.374707] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c523a63, max_idle_ns: 440795252908 ns
[    1.374719] clocksource: Switched to clocksource tsc
[    1.507186] systemd[1]: refresh-rate.service: Failed to open /etc/systemd/system/refresh-rate.service: No such file or directory
[    1.517324] systemd[1]: Queued start job for default target Graphical Interface.
[    1.546767] systemd[1]: Created slice Slice /system/getty.
[    1.547654] systemd[1]: Created slice Slice /system/modprobe.
[    1.548389] systemd[1]: Created slice Slice /system/systemd-fsck.
[    1.548950] systemd[1]: Created slice User and Session Slice.
[    1.549117] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.549243] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.549621] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.549771] systemd[1]: Reached target Local Encrypted Volumes.
[    1.549812] systemd[1]: Reached target Login Prompts.
[    1.549842] systemd[1]: Reached target Local Integrity Protected Volumes.
[    1.549892] systemd[1]: Reached target Network is Online.
[    1.549939] systemd[1]: Reached target Path Units.
[    1.549976] systemd[1]: Reached target Remote File Systems.
[    1.550005] systemd[1]: Reached target Slice Units.
[    1.550049] systemd[1]: Reached target Swaps.
[    1.550097] systemd[1]: Reached target Local Verity Protected Volumes.
[    1.550268] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.550729] systemd[1]: Listening on LVM2 poll daemon socket.
[    1.553576] systemd[1]: Listening on Process Core Dump Socket.
[    1.553863] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.554134] systemd[1]: Listening on Journal Socket.
[    1.554724] systemd[1]: Listening on udev Control Socket.
[    1.554953] systemd[1]: Listening on udev Kernel Socket.
[    1.557007] systemd[1]: Mounting Huge Pages File System...
[    1.559060] systemd[1]: Mounting POSIX Message Queue File System...
[    1.561113] systemd[1]: Mounting Kernel Debug File System...
[    1.563159] systemd[1]: Mounting Kernel Trace File System...
[    1.565418] systemd[1]: Mounting Temporary Directory /tmp...
[    1.567716] systemd[1]: Starting Create List of Static Device Nodes...
[    1.569930] systemd[1]: Starting Load Kernel Module configfs...
[    1.571480] systemd[1]: Starting Load Kernel Module dm_mod...
[    1.573003] systemd[1]: Starting Load Kernel Module drm...
[    1.574578] systemd[1]: Starting Load Kernel Module fuse...
[    1.575791] systemd[1]: Starting Load Kernel Module loop...
[    1.575905] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    1.579638] systemd[1]: Starting Journal Service...
[    1.581179] systemd[1]: Starting Load Kernel Modules...
[    1.581219] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[    1.582156] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.583074] systemd[1]: Starting Coldplug All udev Devices...
[    1.584607] systemd[1]: Mounted Huge Pages File System.
[    1.584727] systemd[1]: Mounted POSIX Message Queue File System.
[    1.584815] systemd[1]: Mounted Kernel Debug File System.
[    1.584879] systemd[1]: Mounted Kernel Trace File System.
[    1.584923] systemd[1]: Mounted Temporary Directory /tmp.
[    1.585160] loop: module loaded
[    1.588219] device-mapper: uevent: version 1.0.3
[    1.588463] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    1.589103] acpi_call: loading out-of-tree module taints kernel.
[    1.589114] acpi_call: module verification failed: signature and/or required key missing - tainting kernel
[    1.589402] EXT4-fs (sda2): re-mounted 982918cf-e528-4e31-a4b5-cbaba7ac5d42. Quota mode: none.
[    1.589436] fuse: init (API version 7.38)
[    1.591533] systemd-journald[165]: Collecting audit messages is disabled.
[    1.608155] systemd[1]: Finished Create List of Static Device Nodes.
[    1.608667] systemd[1]: Started Journal Service.
[    1.614037] vboxdrv: Found 6 processor cores/threads
[    1.634988] vboxdrv: TSC mode is Invariant, tentative frequency 2807998977 Hz
[    1.634991] vboxdrv: Successfully loaded version 7.0.8 r156879 (interface 0x00330004)
[    1.636403] VBoxNetAdp: Successfully started.
[    1.638245] VBoxNetFlt: Successfully started.
[    1.866611] systemd-journald[165]: Received client request to flush runtime journal.
[    1.881201] systemd-journald[165]: /var/log/journal/1c3afc2e96b94e6c811b50fa4d43027f/system.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[    1.881214] systemd-journald[165]: Rotating system journal.
[    2.258351] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
[    2.289552] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    2.290020] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.290044] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.291173] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    2.292375] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.292386] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.292395] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    2.292484] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    2.292492] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.292497] usb usb1: Product: xHCI Host Controller
[    2.292501] usb usb1: Manufacturer: Linux 6.3.1-arch1-1 xhci-hcd
[    2.292505] usb usb1: SerialNumber: 0000:00:14.0
[    2.297595] hub 1-0:1.0: USB hub found
[    2.297636] hub 1-0:1.0: 16 ports detected
[    2.304610] EDAC ie31200: No ECC support
[    2.324444] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    2.324459] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.324465] usb usb2: Product: xHCI Host Controller
[    2.324469] usb usb2: Manufacturer: Linux 6.3.1-arch1-1 xhci-hcd
[    2.324473] usb usb2: SerialNumber: 0000:00:14.0
[    2.328766] hub 2-0:1.0: USB hub found
[    2.328795] hub 2-0:1.0: 6 ports detected
[    2.345586] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.348975] EXT4-fs (sda3): mounted filesystem c17169eb-2d2f-4bd7-8365-8f3733aee030 without journal. Quota mode: none.
[    2.385373] e1000e: Intel(R) PRO/1000 Network Driver
[    2.385377] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.385420] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
[    2.385707] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.387065] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.389968] i2c i2c-0: 2/4 memory slots populated (from DMI)
[    2.390784] i2c i2c-0: Successfully instantiated SPD at 0x51
[    2.391604] i2c i2c-0: Successfully instantiated SPD at 0x53
[    2.400633] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[    2.400637] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.400638] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.400638] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.406621] cryptd: max_cpu_qlen set to 1000
[    2.409235] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    2.409258] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[    2.440308] AVX2 version of gcm_enc/dec engaged.
[    2.440707] AES CTR mode by8 optimization enabled
[    2.440831] spi-nor spi0.0: mx25l12805d (16384 Kbytes)
[    2.449118] Creating 1 MTD partitions on "0000:00:1f.5":
[    2.449122] 0x000000000000-0x000001000000 : "BIOS"
[    2.477875] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.478213] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    2.478291] snd_hda_intel 0000:01:00.1: Disabling MSI
[    2.478295] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.542564] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[    2.542590] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[    2.542618] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[    2.542642] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[    2.544560] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    2.544564] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.544566] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.544567] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.544568] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.544569] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.544570] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.544571] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    2.560524] intel_tcc_cooling: Programmable TCC Offset detected
[    2.563027] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    2.563060] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    2.563088] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    2.563115] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    2.563141] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    2.563170] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    2.563198] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    2.563224] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    2.570737] intel_rapl_common: Found RAPL domain package
[    2.570740] intel_rapl_common: Found RAPL domain core
[    2.570741] intel_rapl_common: Found RAPL domain dram
[    2.571420] usb 1-9: new full-speed USB device number 2 using xhci_hcd
[    2.590955] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    2.661129] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 30:9c:23:d9:4c:05
[    2.661137] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    2.661238] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[    2.665447] e1000e 0000:00:1f.6 eno1: renamed from eth0
[    2.712870] usb 1-9: New USB device found, idVendor=1532, idProduct=021e, bcdDevice= 2.00
[    2.712873] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.712874] usb 1-9: Product: Razer Ornata Chroma
[    2.712875] usb 1-9: Manufacturer: Razer
[    2.714235] input: Razer Razer Ornata Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:1532:021E.0001/input/input16
[    2.733213] nvidia: module license 'NVIDIA' taints kernel.
[    2.733215] Disabling lock debugging due to kernel taint
[    2.759959] BUG: unable to handle page fault for address: 000001ffc474b307
[    2.759980] #PF: supervisor read access in kernel mode
[    2.759993] #PF: error_code(0x0000) - not-present page
[    2.760006] PGD 0 P4D 0 
[    2.760014] Oops: 0000 [#1] PREEMPT SMP NOPTI
[    2.760025] CPU: 3 PID: 202 Comm: (udev-worker) Tainted: P           OE      6.3.1-arch1-1 #1 2f4443c3fa3529b1ac13dc02f36f7de43ade3ecd
[    2.760055] Hardware name: Micro-Star International Co., Ltd. MS-7B22/B360 GAMING PLUS (MS-7B22), BIOS 2.C0 10/14/2020
[    2.760080] RIP: 0010:memcmp+0x32/0x50
[    2.760092] Code: 06 48 39 07 75 17 48 83 c7 08 48 83 c6 08 48 83 ea 08 48 83 fa 07 77 e6 48 85 d2 74 20 31 c9 eb 09 48 83 c1 01 48 39 ca 74 0e <0f> b6 04 0f 44 0f b6 04 0e 44 29 c0 74 e9 c3 cc cc cc cc 31 c0 c3
[    2.760134] RSP: 0018:ffffa8080126fba0 EFLAGS: 00010246
[    2.760147] RAX: 0000000000000002 RBX: ffffa808066bd6f0 RCX: 0000000000000000
[    2.760165] RDX: 0000000000000004 RSI: ffffa8080126fbd8 RDI: 000001ffc474b307
[    2.760181] RBP: ffffa808066bc670 R08: 0000000000000000 R09: ffffffffc48c30c0
[    2.760198] R10: ffff93bf2dffbd80 R11: 0000000000000000 R12: 000000000004c93c
[    2.760215] R13: ffffa808066bd0f0 R14: 000001ffc474b307 R15: 0000000100000002
[    2.760232] FS:  00007f1200657140(0000) GS:ffff93bf1dcc0000(0000) knlGS:0000000000000000
[    2.760251] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.760265] CR2: 000001ffc474b307 CR3: 00000001041a8003 CR4: 00000000003706e0
[    2.760282] Call Trace:
[    2.760289]  <TASK>
[    2.760295]  apply_relocate_add+0xe6/0x280
[    2.760308]  ? cpuidle_enter_state+0x440/0x440
[    2.760322]  load_module+0x213f/0x25a0
[    2.760334]  ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
[    2.760349]  ? __do_sys_init_module+0x17f/0x1b0
[    2.760362]  __do_sys_init_module+0x17f/0x1b0
[    2.760375]  do_syscall_64+0x5d/0x90
[    2.760385]  ? syscall_exit_to_user_mode+0x1b/0x40
[    2.760398]  ? do_syscall_64+0x6c/0x90
[    2.760409]  ? ksys_read+0x6f/0xf0
[    2.760419]  ? syscall_exit_to_user_mode+0x1b/0x40
[    2.760432]  ? do_syscall_64+0x6c/0x90
[    2.760442]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[    2.760455] RIP: 0033:0x7f1200921f9e
[    2.760474] Code: 48 8b 0d bd ed 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8a ed 0c 00 f7 d8 64 89 01 48
[    2.760516] RSP: 002b:00007ffc1ff2aa68 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[    2.760535] RAX: ffffffffffffffda RBX: 0000562c7665df00 RCX: 00007f1200921f9e
[    2.760551] RDX: 00007f1200ebe343 RSI: 00000000052dc975 RDI: 00007f11f2fe2010
[    2.760568] RBP: 00007f1200ebe343 R08: 0000000002061000 R09: 0000000000000000
[    2.760585] R10: 0000000000075941 R11: 0000000000000246 R12: 0000000000020000
[    2.760602] R13: 0000562c765aeae0 R14: 0000562c7665df00 R15: 0000562c76654170
[    2.760620]  </TASK>
[    2.760625] Modules linked in: snd_sof_pci_intel_cnl snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof snd_sof_utils soundwire_bus snd_soc_skl snd_soc_hdac_hda snd_hda_ext_core snd_soc_sst_ipc intel_rapl_msr snd_soc_sst_dsp intel_rapl_common intel_tcc_cooling snd_soc_acpi_intel_match x86_pkg_temp_thermal snd_soc_acpi intel_powerclamp coretemp snd_soc_core snd_hda_codec_realtek kvm_intel snd_hda_codec_generic snd_compress ledtrig_audio snd_hda_codec_hdmi ac97_bus kvm snd_pcm_dmaengine snd_hda_intel snd_intel_dspcfg irqbypass snd_intel_sdw_acpi crct10dif_pclmul snd_hda_codec crc32_pclmul polyval_clmulni polyval_generic gf128mul snd_hda_core ghash_clmulni_intel snd_hwdep sha512_ssse3 snd_pcm spi_nor aesni_intel crypto_simd ee1004 cryptd mtd mei_hdcp snd_timer rapl mei_pxp i2c_i801 intel_cstate snd spi_intel_pci mxm_wmi mei_me intel_wmi_thunderbolt wmi_bmof soundcore e1000e intel_uncore i2c_smbus pcspkr spi_intel xhci_pci
[    2.760657]  intel_pch_thermal mei xhci_pci_renesas video acpi_tad wmi acpi_pad mac_hid vboxnetflt(OE) vboxnetadp(OE) vboxdrv(OE) dm_multipath crypto_user acpi_call(OE) fuse dm_mod loop bpf_preload ip_tables x_tables usbhid ext4 crc32c_generic crc32c_intel crc16 mbcache jbd2 vfat fat
[    2.767018] CR2: 000001ffc474b307
[    2.767597] ---[ end trace 0000000000000000 ]---
[    2.768172] RIP: 0010:memcmp+0x32/0x50
[    2.768744] Code: 06 48 39 07 75 17 48 83 c7 08 48 83 c6 08 48 83 ea 08 48 83 fa 07 77 e6 48 85 d2 74 20 31 c9 eb 09 48 83 c1 01 48 39 ca 74 0e <0f> b6 04 0f 44 0f b6 04 0e 44 29 c0 74 e9 c3 cc cc cc cc 31 c0 c3
[    2.768960] hid-generic 0003:1532:021E.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer Ornata Chroma] on usb-0000:00:14.0-9/input0
[    2.769944] RSP: 0018:ffffa8080126fba0 EFLAGS: 00010246
[    2.771811] RAX: 0000000000000002 RBX: ffffa808066bd6f0 RCX: 0000000000000000
[    2.772451] RDX: 0000000000000004 RSI: ffffa8080126fbd8 RDI: 000001ffc474b307
[    2.773073] RBP: ffffa808066bc670 R08: 0000000000000000 R09: ffffffffc48c30c0
[    2.773692] R10: ffff93bf2dffbd80 R11: 0000000000000000 R12: 000000000004c93c
[    2.774315] R13: ffffa808066bd0f0 R14: 000001ffc474b307 R15: 0000000100000002
[    2.774803] input: Razer Razer Ornata Chroma Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:1532:021E.0002/input/input17
[    2.774975] FS:  00007f1200657140(0000) GS:ffff93bf1dcc0000(0000) knlGS:0000000000000000
[    2.776924] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.777586] CR2: 000001ffc474b307 CR3: 00000001041a8003 CR4: 00000000003706e0
[    2.778291] note: (udev-worker)[202] exited with irqs disabled
[    2.831427] input: Razer Razer Ornata Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:1532:021E.0002/input/input18
[    2.833032] hid-generic 0003:1532:021E.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Ornata Chroma] on usb-0000:00:14.0-9/input1
[    2.835242] input: Razer Razer Ornata Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/0003:1532:021E.0003/input/input19
[    2.836940] hid-generic 0003:1532:021E.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Ornata Chroma] on usb-0000:00:14.0-9/input2
[    2.961405] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[    2.993377] msr: Write to unrecognized MSR 0x150 by intel-undervolt (pid: 314).
[    2.995020] msr: See https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about for details.
[    3.102989] usb 1-10: New USB device found, idVendor=1532, idProduct=0083, bcdDevice= 2.00
[    3.103811] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.104623] usb 1-10: Product: Razer Basilisk X HyperSpeed
[    3.105446] usb 1-10: Manufacturer: Razer
[    3.108298] input: Razer Razer Basilisk X HyperSpeed as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:1532:0083.0004/input/input20
[    3.110107] hid-generic 0003:1532:0083.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer Basilisk X HyperSpeed] on usb-0000:00:14.0-10/input0
[    3.112663] input: Razer Razer Basilisk X HyperSpeed Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:1532:0083.0005/input/input21
[    3.168175] input: Razer Razer Basilisk X HyperSpeed as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:1532:0083.0005/input/input22
[    3.169966] hid-generic 0003:1532:0083.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer Basilisk X HyperSpeed] on usb-0000:00:14.0-10/input1
[    3.172788] input: Razer Razer Basilisk X HyperSpeed as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:1532:0083.0006/input/input23
[    3.231686] hid-generic 0003:1532:0083.0006: input,hidraw5: USB HID v1.11 Keyboard [Razer Razer Basilisk X HyperSpeed] on usb-0000:00:14.0-10/input2
[    3.303969] mousedev: PS/2 mouse device common for all mice
[    6.077404] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   15.999666] systemd-journald[165]: /var/log/journal/1c3afc2e96b94e6c811b50fa4d43027f/user-1000.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.

Please tell me other commands to execute so I can help you.
If I have sensitive information in my dmesg, please tell me.

Thanks,
code_xpert

Last edited by code_xpert (2023-06-02 08:20:44)

Lone_Wolf · 2023-05-27 12:30:37

[    0.141665] smpboot: CPU0: Intel(R) Core(TM) i5-8400 CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0xa)

https://ark.intel.com/content/www/us/en … 0-ghz.html indicates that porcessor has an integrated gpu, but log doesn't show it . Did you disable it in uefi firmware ?

[    0.000000] Command line: initrd=\initramfs-linux.img root=UUID=982918cf-e528-4e31-a4b5-cbaba7ac5d42 rw quiet loglevel=3 nvidia-drm.modeset=1 modprobe.blacklist=nouveau nowatchdog mitigations=off

Does running with mitigations enabled have the same issue ?

Last edited by Lone_Wolf (2023-05-27 12:31:13)

seth · 2023-05-27 14:15:33

[    2.733213] nvidia: module license 'NVIDIA' taints kernel.
[    2.733215] Disabling lock debugging due to kernel taint
[    2.759959] BUG: unable to handle page fault for address: 000001ffc474b307
[    2.759980] #PF: supervisor read access in kernel mode
[    2.759993] #PF: error_code(0x0000) - not-present page
[    2.760006] PGD 0 P4D 0 
[    2.760014] Oops: 0000 [#1] PREEMPT SMP NOPTI
[    2.760025] CPU: 3 PID: 202 Comm: (udev-worker) Tainted: P           OE      6.3.1-arch1-1 #1 2f4443c3fa3529b1ac13dc02f36f7de43ade3ecd
[    2.760055] Hardware name: Micro-Star International Co., Ltd. MS-7B22/B360 GAMING PLUS (MS-7B22), BIOS 2.C0 10/14/2020
[    2.760080] RIP: 0010:memcmp+0x32/0x50
[    2.760092] Code: 06 48 39 07 75 17 48 83 c7 08 48 83 c6 08 48 83 ea 08 48 83 fa 07 77 e6 48 85 d2 74 20 31 c9 eb 09 48 83 c1 01 48 39 ca 74 0e <0f> b6 04 0f 44 0f b6 04 0e 44 29 c0 74 e9 c3 cc cc cc cc 31 c0 c3
[    2.760134] RSP: 0018:ffffa8080126fba0 EFLAGS: 00010246
[    2.760147] RAX: 0000000000000002 RBX: ffffa808066bd6f0 RCX: 0000000000000000
[    2.760165] RDX: 0000000000000004 RSI: ffffa8080126fbd8 RDI: 000001ffc474b307
[    2.760181] RBP: ffffa808066bc670 R08: 0000000000000000 R09: ffffffffc48c30c0
[    2.760198] R10: ffff93bf2dffbd80 R11: 0000000000000000 R12: 000000000004c93c
[    2.760215] R13: ffffa808066bd0f0 R14: 000001ffc474b307 R15: 0000000100000002
[    2.760232] FS:  00007f1200657140(0000) GS:ffff93bf1dcc0000(0000) knlGS:0000000000000000
[    2.760251] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.760265] CR2: 000001ffc474b307 CR3: 00000001041a8003 CR4: 00000000003706e0
[    2.760282] Call Trace:
[    2.760289]  <TASK>
[    2.760295]  apply_relocate_add+0xe6/0x280
[    2.760308]  ? cpuidle_enter_state+0x440/0x440
[    2.760322]  load_module+0x213f/0x25a0
[    2.760334]  ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
[    2.760349]  ? __do_sys_init_module+0x17f/0x1b0
[    2.760362]  __do_sys_init_module+0x17f/0x1b0
[    2.760375]  do_syscall_64+0x5d/0x90
[    2.760385]  ? syscall_exit_to_user_mode+0x1b/0x40
[    2.760398]  ? do_syscall_64+0x6c/0x90
[    2.760409]  ? ksys_read+0x6f/0xf0
[    2.760419]  ? syscall_exit_to_user_mode+0x1b/0x40
[    2.760432]  ? do_syscall_64+0x6c/0x90
[    2.760442]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[    2.760455] RIP: 0033:0x7f1200921f9e
[    2.760474] Code: 48 8b 0d bd ed 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8a ed 0c 00 f7 d8 64 89 01 48
[    2.760516] RSP: 002b:00007ffc1ff2aa68 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[    2.760535] RAX: ffffffffffffffda RBX: 0000562c7665df00 RCX: 00007f1200921f9e
[    2.760551] RDX: 00007f1200ebe343 RSI: 00000000052dc975 RDI: 00007f11f2fe2010
[    2.760568] RBP: 00007f1200ebe343 R08: 0000000002061000 R09: 0000000000000000
[    2.760585] R10: 0000000000075941 R11: 0000000000000246 R12: 0000000000020000
[    2.760602] R13: 0000562c765aeae0 R14: 0000562c7665df00 R15: 0000562c76654170
[    2.760620]  </TASK>
[    2.760625] Modules linked in: snd_sof_pci_intel_cnl snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof snd_sof_utils soundwire_bus snd_soc_skl snd_soc_hdac_hda snd_hda_ext_core snd_soc_sst_ipc intel_rapl_msr snd_soc_sst_dsp intel_rapl_common intel_tcc_cooling snd_soc_acpi_intel_match x86_pkg_temp_thermal snd_soc_acpi intel_powerclamp coretemp snd_soc_core snd_hda_codec_realtek kvm_intel snd_hda_codec_generic snd_compress ledtrig_audio snd_hda_codec_hdmi ac97_bus kvm snd_pcm_dmaengine snd_hda_intel snd_intel_dspcfg irqbypass snd_intel_sdw_acpi crct10dif_pclmul snd_hda_codec crc32_pclmul polyval_clmulni polyval_generic gf128mul snd_hda_core ghash_clmulni_intel snd_hwdep sha512_ssse3 snd_pcm spi_nor aesni_intel crypto_simd ee1004 cryptd mtd mei_hdcp snd_timer rapl mei_pxp i2c_i801 intel_cstate snd spi_intel_pci mxm_wmi mei_me intel_wmi_thunderbolt wmi_bmof soundcore e1000e intel_uncore i2c_smbus pcspkr spi_intel xhci_pci
[    2.760657]  intel_pch_thermal mei xhci_pci_renesas video acpi_tad wmi acpi_pad mac_hid vboxnetflt(OE) vboxnetadp(OE) vboxdrv(OE) dm_multipath crypto_user acpi_call(OE) fuse dm_mod loop bpf_preload ip_tables x_tables usbhid ext4 crc32c_generic crc32c_intel crc16 mbcache jbd2 vfat fat
[    2.767018] CR2: 000001ffc474b307
[    2.767597] ---[ end trace 0000000000000000 ]---
[    2.768172] RIP: 0010:memcmp+0x32/0x50

https://bbs.archlinux.org/viewtopic.php?id=286066
There might be something going on here…

code_xpert · 2023-05-28 07:42:12

Lone_Wolf wrote:

https://ark.intel.com/content/www/us/en … 0-ghz.html indicates that porcessor has an integrated gpu, but log doesn't show it . Did you disable it in uefi firmware ?

Don't remember ever having integrated graphics. I remember one time where I looked up the specs of my CPU and was suprized to see that my CPU had integrated graphics. I surely never used it before.
I have selected my "graphics device" to be PEG (I think it stands for physical external graphics) in the BIOS instead of IGD (intergrated graphics device???), so that could be a reason why Intel integrated graphics don't show up.

Does running with mitigations enabled have the same issue ?

It is a bit difficult (for me, as I might not have all the knowledge) to change my kernel parameters because I set them up with UEFI Shell (so no more GRUB), and now my colon/semicolon button doesn't work, where the whole shell relies around it.
I tried to use efibootmgr before using UEFI Shell, but for some reason (which I don't remember) it wouldn't work. I just tried using efibootmgr right now anyway, and it didn't make any entry.
How else can I run with mitigations enabled?

seth · 2023-05-28 10:31:28

and now my colon/semicolon button doesn't work

Remove the overprized gam0rz thing and attach a $5 keyboard - do the keys work?
How do you use the system w/o a functional keyboard to begin with?

Or does the keyboard work w/ a live distro (grml or the install iso)?

code_xpert · 2023-05-28 12:39:38

seth wrote:

and now my colon/semicolon button doesn't work
Remove the overprized gam0rz thing and attach a $5 keyboard - do the keys work?
How do you use the system w/o a functional keyboard to begin with?
Or does the keyboard work w/ a live distro (grml or the install iso)?

The problem is definitely a hardware one.
I would replace my keyboard with something else if I had one. I'm pretty sure coding in C is the one to blame for the damage.
When I set up the system ~2 years ago, my keyboard was fully functional. The specific key broke ~2-3 months ago.
There is no difference with a live distro unfortunately.

To use the semicolon/colon, I either copy and paste the symbol or use an on-screen keyboard when my PC works normally.

Last edited by code_xpert (2023-05-28 12:41:13)

seth · 2023-05-28 14:25:02

Ok, I'd suggest yo ucall back once you can edit the kernel commandline, because (re-reading the OP and the cold-boot condition), that'll be relevant one way or another…

If you can right now, try to add the nvidia modules to the initramfs, https://wiki.archlinux.org/title/NVIDIA#Early_loading

Natpunk · 2023-05-30 00:28:02

Try reinstalling arch or your kernel it might be the problem if you've updated the kernel.

code_xpert · 2023-06-01 12:52:39

seth wrote:

Ok, I'd suggest yo ucall back once you can edit the kernel commandline, because (re-reading the OP and the cold-boot condition), that'll be relevant one way or another…
If you can right now, try to add the nvidia modules to the initramfs, https://wiki.archlinux.org/title/NVIDIA#Early_loading

Seems like adding the nvidia modules did the trick (for now). Haven't experienced any difficulties yet.
Arch boots up as it is supposed to.
Thanks for the help.

seth · 2023-06-01 16:03:19

\o/
Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

code_xpert · 2023-06-02 08:22:27

seth wrote:

\o/
Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

Ok, I added [SOLVED] to the posts subject. I got a new problem so I might as well make a new post. Thanks.

Arch Linux

#1 2023-05-27 09:47:22

[SOLVED] Continuous kernel oops when starting up

#2 2023-05-27 12:30:37

Re: [SOLVED] Continuous kernel oops when starting up

#3 2023-05-27 14:15:33

Re: [SOLVED] Continuous kernel oops when starting up

#4 2023-05-28 07:42:12

Re: [SOLVED] Continuous kernel oops when starting up

#5 2023-05-28 10:31:28

Re: [SOLVED] Continuous kernel oops when starting up

#6 2023-05-28 12:39:38

Re: [SOLVED] Continuous kernel oops when starting up

#7 2023-05-28 14:25:02

Re: [SOLVED] Continuous kernel oops when starting up

#8 2023-05-30 00:28:02

Re: [SOLVED] Continuous kernel oops when starting up

#9 2023-06-01 12:52:39

Re: [SOLVED] Continuous kernel oops when starting up

#10 2023-06-01 16:03:19

Re: [SOLVED] Continuous kernel oops when starting up

#11 2023-06-02 08:22:27

Re: [SOLVED] Continuous kernel oops when starting up

Board footer