You are not logged in.
Problem: When playing a video, on both mpv and youtube, sound will occasionally stop for a couple of seconds and while the video is still playing then the video will freeze and allow the sound to catch up. Sound will also frequently stop during video games (through proton).
Diagnostics: Both dmesg and journalctl don’t print out anything relevant when the freezing event occurs.
Debugging steps: Restarting the system seems to help, however after 30 minutes or so of playback, the problem reappears. I originally run pipewire and switched to pulseaudio, I also reinstalled the entire system in case I didn’t correctly perform the switch. I also tried different headphones, audio jacks, and settings for the microphone whose audio jack I usually use to plug in my headphones. During all of that the problem persists. In its current configuration the computer takes a few hours before manifesting the problem and it hasn’t manifested the bug yet in video games.
Thank's in advance to anyone who reads this, this problem has frustrated me greatly
pacmd list-cards
4 card(s) available.
index: 0
name: <alsa_card.pci-0000_03_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfcda0000 irq 116"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:03:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "ab38"
device.product.name = "Navi 10 HDMI Audio"
device.string = "0"
device.description = "Navi 10 HDMI Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 38468, available: unknown)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (priority 5700, available: no)
output:hdmi-surround-extra5: Digital Surround 5.1 (HDMI 6) Output (priority 600, available: no)
output:hdmi-surround71-extra5: Digital Surround 7.1 (HDMI 6) Output (priority 600, available: no)
off: Off (priority 0, available: unknown)
active profile: <output:hdmi-stereo-extra3>
sinks:
alsa_output.pci-0000_03_00.1.hdmi-stereo-extra3/#0: Navi 10 HDMI Audio Digital Stereo (HDMI 4)
sources:
alsa_output.pci-0000_03_00.1.hdmi-stereo-extra3.monitor/#0: Monitor of Navi 10 HDMI Audio Digital Stereo (HDMI 4)
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "DELL G3223Q"
hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-5: HDMI / DisplayPort 6 (priority 5400, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.usb-Elgato_Systems_Elgato_Wave_1_AS31J1A08137-00>
driver: <module-alsa-card.c>
owner module: 7
properties:
alsa.card = "3"
alsa.card_name = "Elgato Wave:1"
alsa.long_card_name = "Elgato Systems Elgato Wave:1 at usb-0000:15:00.0-5.1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:15:00.0-usb-0:5.1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:04:00.0/0000:05:08.0/0000:0b:00.0/0000:0c:0c.0/0000:15:00.0/usb1/1-5/1-5.1/1-5.1:1.0/sound/card3"
udev.id = "usb-Elgato_Systems_Elgato_Wave:1_AS31J1A08137-00"
device.bus = "usb"
device.vendor.id = "0fd9"
device.vendor.name = "Elgato Systems GmbH"
device.product.id = "006e"
device.product.name = "Elgato Wave:1"
device.serial = "Elgato_Systems_Elgato_Wave:1_AS31J1A08137"
device.string = "3"
device.description = "Elgato Wave:1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
profiles:
input:mono-fallback: Mono Input (priority 1, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
output:analog-stereo+input:mono-fallback: Analog Stereo Output + Mono Input (priority 6501, available: unknown)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500, available: unknown)
output:iec958-stereo+input:mono-fallback: Digital Stereo (IEC958) Output + Mono Input (priority 5501, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:iec958-stereo+input:mono-fallback>
sinks:
alsa_output.usb-Elgato_Systems_Elgato_Wave_1_AS31J1A08137-00.iec958-stereo/#3: Elgato Wave:1 Digital Stereo (IEC958)
sources:
alsa_input.usb-Elgato_Systems_Elgato_Wave_1_AS31J1A08137-00.mono-fallback/#2: Elgato Wave:1 Mono
alsa_output.usb-Elgato_Systems_Elgato_Wave_1_AS31J1A08137-00.iec958-stereo.monitor/#4: Monitor of Elgato Wave:1 Digital Stereo (IEC958)
ports:
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
index: 2
name: <alsa_card.pci-0000_19_00.1>
driver: <module-alsa-card.c>
owner module: 8
properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfcc88000 irq 118"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:19:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:19:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1640"
device.product.name = "Rembrandt Radeon High Definition Audio Controller"
device.string = "1"
device.description = "Rembrandt Radeon High Definition Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
off: Off (priority 0, available: unknown)
active profile: <off>
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 3
name: <alsa_card.pci-0000_19_00.6>
driver: <module-alsa-card.c>
owner module: 9
properties:
alsa.card = "2"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfcc80000 irq 119"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:19:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:19:00.6/sound/card2"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h/19h HD Audio Controller"
device.string = "2"
device.description = "Family 17h/19h HD Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 65, available: no)
output:analog-stereo: Analog Stereo Output (priority 6500, available: no)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: no)
off: Off (priority 0, available: unknown)
active profile: <off>
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: no)
properties:
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"pacmd list-sinks
2 sink(s) available.
index: 0
name: <alsa_output.pci-0000_03_00.1.hdmi-stereo-extra3>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9030
volume: front-left: 64549 / 98% / -0.40 dB, front-right: 64549 / 98% / -0.40 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
card: 0 <alsa_card.pci-0000_03_00.1>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "DELL G3223Q"
alsa.id = "HDMI 3"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "9"
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfcda0000 irq 116"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:03:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "ab38"
device.product.name = "Navi 10 HDMI Audio"
device.string = "hdmi:0,3"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo-extra3"
device.profile.description = "Digital Stereo (HDMI 4)"
device.description = "Navi 10 HDMI Audio Digital Stereo (HDMI 4)"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "DELL G3223Q"
active port: <hdmi-output-3>
* index: 3
name: <alsa_output.usb-Elgato_Systems_Elgato_Wave_1_AS31J1A08137-00.iec958-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9047
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 4
sample spec: s24le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.usb-Elgato_Systems_Elgato_Wave_1_AS31J1A08137-00>
module: 7
properties:
alsa.resolution_bits = "24"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "3"
alsa.card_name = "Elgato Wave:1"
alsa.long_card_name = "Elgato Systems Elgato Wave:1 at usb-0000:15:00.0-5.1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:15:00.0-usb-0:5.1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:04:00.0/0000:05:08.0/0000:0b:00.0/0000:0c:0c.0/0000:15:00.0/usb1/1-5/1-5.1/1-5.1:1.0/sound/card3"
udev.id = "usb-Elgato_Systems_Elgato_Wave:1_AS31J1A08137-00"
device.bus = "usb"
device.vendor.id = "0fd9"
device.vendor.name = "Elgato Systems GmbH"
device.product.id = "006e"
device.product.name = "Elgato Wave:1"
device.serial = "Elgato_Systems_Elgato_Wave:1_AS31J1A08137"
device.string = "iec958:3"
device.buffering.buffer_size = "576000"
device.buffering.fragment_size = "288000"
device.access_mode = "mmap+timer"
device.profile.name = "iec958-stereo"
device.profile.description = "Digital Stereo (IEC958)"
device.description = "Elgato Wave:1 Digital Stereo (IEC958)"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
active port: <iec958-stereo-output>pacmd -list-sources
3 source(s) available.
index: 0
name: <alsa_output.pci-0000_03_00.1.hdmi-stereo-extra3.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1030
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_03_00.1>
module: 6
properties:
device.description = "Monitor of Navi 10 HDMI Audio Digital Stereo (HDMI 4)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfcda0000 irq 116"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:03:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "ab38"
device.product.name = "Navi 10 HDMI Audio"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 2
name: <alsa_input.usb-Elgato_Systems_Elgato_Wave_1_AS31J1A08137-00.mono-fallback>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9040
volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 14119 / 22% / -40.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s24le 1ch 48000Hz
channel map: mono
Mono
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.usb-Elgato_Systems_Elgato_Wave_1_AS31J1A08137-00>
module: 7
properties:
alsa.resolution_bits = "24"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "3"
alsa.card_name = "Elgato Wave:1"
alsa.long_card_name = "Elgato Systems Elgato Wave:1 at usb-0000:15:00.0-5.1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:15:00.0-usb-0:5.1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:04:00.0/0000:05:08.0/0000:0b:00.0/0000:0c:0c.0/0000:15:00.0/usb1/1-5/1-5.1/1-5.1:1.0/sound/card3"
udev.id = "usb-Elgato_Systems_Elgato_Wave:1_AS31J1A08137-00"
device.bus = "usb"
device.vendor.id = "0fd9"
device.vendor.name = "Elgato Systems GmbH"
device.product.id = "006e"
device.product.name = "Elgato Wave:1"
device.serial = "Elgato_Systems_Elgato_Wave:1_AS31J1A08137"
device.string = "hw:3"
device.buffering.buffer_size = "288000"
device.buffering.fragment_size = "144000"
device.access_mode = "mmap+timer"
device.profile.name = "mono-fallback"
device.profile.description = "Mono"
device.description = "Elgato Wave:1 Mono"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
active port: <analog-input-mic>
index: 4
name: <alsa_output.usb-Elgato_Systems_Elgato_Wave_1_AS31J1A08137-00.iec958-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1040
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s24le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 3
card: 1 <alsa_card.usb-Elgato_Systems_Elgato_Wave_1_AS31J1A08137-00>
module: 7
properties:
device.description = "Monitor of Elgato Wave:1 Digital Stereo (IEC958)"
device.class = "monitor"
alsa.card = "3"
alsa.card_name = "Elgato Wave:1"
alsa.long_card_name = "Elgato Systems Elgato Wave:1 at usb-0000:15:00.0-5.1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:15:00.0-usb-0:5.1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:04:00.0/0000:05:08.0/0000:0b:00.0/0000:0c:0c.0/0000:15:00.0/usb1/1-5/1-5.1/1-5.1:1.0/sound/card3"
udev.id = "usb-Elgato_Systems_Elgato_Wave:1_AS31J1A08137-00"
device.bus = "usb"
device.vendor.id = "0fd9"
device.vendor.name = "Elgato Systems GmbH"
device.product.id = "006e"
device.product.name = "Elgato Wave:1"
device.serial = "Elgato_Systems_Elgato_Wave:1_AS31J1A08137"
device.string = "3"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"systool -vm snd_usb_audio
Module = "snd_usb_audio"
Attributes:
coresize = "458752"
initsize = "0"
initstate = "live"
refcnt = "2"
srcversion = "D2B482333BC2203622FB92E"
taint = ""
uevent = <store method only>
Parameters:
autoclock = "Y"
delayed_register = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
device_setup = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
enable = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
id = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
ignore_ctl_error = "N"
implicit_fb = "N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N"
index = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
lowlatency = "Y"
pid = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
quirk_alias = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
quirk_flags = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
skip_validation = "N"
use_vmalloc = "Y"
vid = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
Sections:Last edited by Flashheart (2023-06-24 16:40:02)
Offline
[Update]
I updated my bios (Asrock X670E PG Lightning 1.03 -> 1.23) and the issue stopped appearing. It could also be that the package responsible was fixed in an update. Anyhow, this took longer than it should have, I hope anyone who encounters a similar problem in the future gains something from this post
Offline