You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2023-06-10 19:43:01
- BitLegend31
- Member
- Registered: 2023-02-15
- Posts: 19
Few problems with arch and laptop!
Greetings! I’m using arch linux (KDE desktop if needed) and im experiencing 2 problems!
1. Sometimes my laptop just won’t wake up after suspend, or after wakeup will get frozen so only hard restart is the solution.
2. Sometimes after choosing Arch Linux in grub my screen becomes something like this (https://imgur.com/a/ACabAz1). Any additional information can be provided! Thanks in advance!
Last edited by BitLegend31 (2023-06-10 19:50:13)
Offline
#2 2023-06-10 20:06:04
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,560
Re: Few problems with arch and laptop!
1. "frozen" similar to the image you posted or it just won't wake up?
2. The screenshot looks more like some DM than grub?
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
Offline
#3 2023-06-10 20:08:24
- BitLegend31
- Member
- Registered: 2023-02-15
- Posts: 19
Re: Few problems with arch and laptop!
seth wrote:
1. "frozen" similar to the image you posted or it just won't wake up?
2. The screenshot looks more like some DM than grub?Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
Hello Seth!
1. No, either it won't wake up, or just frozen: mouse and keyboard do not do anything.
2. This issue begins right after selecting arch linux in the grub, i.e right when the kernel loads. I can even see kernel loading messages while this error is there.
Offline
#4 2023-06-10 20:12:08
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,560
Re: Few problems with arch and laptop!
Then please also post the complete system journal for a boot:
sudo journalctl -b | curl -F 'f:1=<-' ix.io (ideally one with the artifacts, eg. "… -b -1 …" for the previous one
When it freezes after the S3 can you
a) switch to a different VT (ctrl+alt+F1,F2,F3,…)
b) ssh into the system
c) https://wiki.archlinux.org/title/SysRq ?
Offline
#5 2023-06-10 20:15:48
- BitLegend31
- Member
- Registered: 2023-02-15
- Posts: 19
Re: Few problems with arch and laptop!
seth wrote:
Then please also post the complete system journal for a boot:
sudo journalctl -b | curl -F 'f:1=<-' ix.io(ideally one with the artifacts, eg. "… -b -1 …" for the previous one
When it freezes after the S3 can you
a) switch to a different VT (ctrl+alt+F1,F2,F3,…)
b) ssh into the system
c) https://wiki.archlinux.org/title/SysRq ?
Here's the Xorg.0.log:
[ 7.125] (--) Log file renamed from "/var/log/Xorg.pid-1021.log" to "/var/log/Xorg.0.log"
[ 7.125]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 7.125] Current Operating System: Linux aren 6.3.6-arch1-1 #1 SMP PREEMPT_DYNAMIC Mon, 05 Jun 2023 15:12:57 +0000 x86_64
[ 7.126] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c192d5e0-7d0c-4d4f-838e-f0c8d26cb4b9 rw loglevel=3 quiet acpi_backlight=video acpi_backlight=vendor acpi_backlight=native
[ 7.126]
[ 7.126] Current version of pixman: 0.42.2
[ 7.126] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.126] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.126] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 10 23:35:04 2023
[ 7.126] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.126] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 7.127] (==) No Layout section. Using the first Screen section.
[ 7.127] (==) No screen section available. Using defaults.
[ 7.127] (**) |-->Screen "Default Screen Section" (0)
[ 7.127] (**) | |-->Monitor "<default monitor>"
[ 7.127] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.127] (==) Automatically adding devices
[ 7.127] (==) Automatically enabling devices
[ 7.127] (==) Automatically adding GPU devices
[ 7.127] (==) Automatically binding GPU devices
[ 7.127] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 7.127] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 7.127] Entry deleted from font path.
[ 7.127] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 7.127] Entry deleted from font path.
[ 7.127] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 7.127] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[ 7.127] Entry deleted from font path.
[ 7.127] (Run 'mkfontdir' on "/usr/share/fonts/OTF").
[ 7.127] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 7.127] Entry deleted from font path.
[ 7.127] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 7.127] Entry deleted from font path.
[ 7.127] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 7.127] Entry deleted from font path.
[ 7.127] (==) FontPath set to:
[ 7.127] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.127] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.127] (II) Module ABI versions:
[ 7.127] X.Org ANSI C Emulation: 0.4
[ 7.127] X.Org Video Driver: 25.2
[ 7.127] X.Org XInput driver : 24.4
[ 7.127] X.Org Server Extension : 10.0
[ 7.128] (++) using VT number 1
[ 7.128] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 7.128] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7.128] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/drm/card1
[ 7.129] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.129] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:34:00.0/drm/card0
[ 7.143] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 7.459] (--) PCI: (1@0:0:0) 10de:24e0:17aa:3b09 rev 161, Mem @ 0xb8000000/16777216, 0x7a00000000/8589934592, 0x7c00000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 7.459] (--) PCI:*(52@0:0:0) 1002:1681:17aa:3b09 rev 200, Mem @ 0x7c40000000/268435456, 0x7c50000000/2097152, 0xb9800000/524288, I/O @ 0x00001000/256
[ 7.459] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 7.459] (II) LoadModule: "glx"
[ 7.469] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.471] (II) Module glx: vendor="X.Org Foundation"
[ 7.471] compiled for 1.21.1.8, module version = 1.0.0
[ 7.471] ABI class: X.Org Server Extension, version 10.0
[ 7.471] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 7.471] loading driver: amdgpu
[ 7.471] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 7.471] loading driver: nvidia
[ 7.471] (==) Matched amdgpu as autoconfigured driver 0
[ 7.471] (==) Matched ati as autoconfigured driver 1
[ 7.471] (==) Matched nvidia as autoconfigured driver 2
[ 7.471] (==) Matched nouveau as autoconfigured driver 3
[ 7.471] (==) Matched nv as autoconfigured driver 4
[ 7.471] (==) Matched modesetting as autoconfigured driver 5
[ 7.471] (==) Matched fbdev as autoconfigured driver 6
[ 7.471] (==) Matched vesa as autoconfigured driver 7
[ 7.471] (==) Assigned the driver to the xf86ConfigLayout
[ 7.471] (II) LoadModule: "amdgpu"
[ 7.472] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 7.473] (II) Module amdgpu: vendor="X.Org Foundation"
[ 7.473] compiled for 1.21.1.7, module version = 23.0.0
[ 7.473] Module class: X.Org Video Driver
[ 7.473] ABI class: X.Org Video Driver, version 25.2
[ 7.473] (II) LoadModule: "ati"
[ 7.473] (WW) Warning, couldn't open module ati
[ 7.473] (EE) Failed to load module "ati" (module does not exist, 0)
[ 7.473] (II) LoadModule: "nvidia"
[ 7.473] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 7.475] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 7.475] compiled for 1.6.99.901, module version = 1.0.0
[ 7.475] Module class: X.Org Video Driver
[ 7.475] (II) LoadModule: "nouveau"
[ 7.475] (WW) Warning, couldn't open module nouveau
[ 7.475] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 7.475] (II) LoadModule: "nv"
[ 7.475] (WW) Warning, couldn't open module nv
[ 7.475] (EE) Failed to load module "nv" (module does not exist, 0)
[ 7.475] (II) LoadModule: "modesetting"
[ 7.475] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 7.475] (II) Module modesetting: vendor="X.Org Foundation"
[ 7.475] compiled for 1.21.1.8, module version = 1.21.1
[ 7.475] Module class: X.Org Video Driver
[ 7.475] ABI class: X.Org Video Driver, version 25.2
[ 7.475] (II) LoadModule: "fbdev"
[ 7.476] (WW) Warning, couldn't open module fbdev
[ 7.476] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.476] (II) LoadModule: "vesa"
[ 7.476] (WW) Warning, couldn't open module vesa
[ 7.476] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 7.476] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 7.476] (II) NVIDIA dlloader X Driver 530.41.03 Thu Mar 16 19:25:45 UTC 2023
[ 7.476] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 7.476] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 7.478] (WW) Falling back to old probe method for modesetting
[ 7.478] (II) Loading sub module "fb"
[ 7.478] (II) LoadModule: "fb"
[ 7.478] (II) Module "fb" already built-in
[ 7.478] (II) Loading sub module "wfb"
[ 7.478] (II) LoadModule: "wfb"
[ 7.478] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 7.479] (II) Module wfb: vendor="X.Org Foundation"
[ 7.479] compiled for 1.21.1.8, module version = 1.0.0
[ 7.479] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.479] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.479] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 7.479] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 7.479] (==) AMDGPU(0): Default visual is TrueColor
[ 7.479] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card0
[ 7.479] (==) AMDGPU(0): RGB weight 888
[ 7.479] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 7.479] (--) AMDGPU(0): Chipset: "AMD Radeon Graphics" (ChipID = 0x1681)
[ 7.479] (II) Loading sub module "fb"
[ 7.479] (II) LoadModule: "fb"
[ 7.479] (II) Module "fb" already built-in
[ 7.479] (II) Loading sub module "dri2"
[ 7.479] (II) LoadModule: "dri2"
[ 7.479] (II) Module "dri2" already built-in
[ 7.552] (II) Loading sub module "glamoregl"
[ 7.552] (II) LoadModule: "glamoregl"
[ 7.552] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 7.556] (II) Module glamoregl: vendor="X.Org Foundation"
[ 7.556] compiled for 1.21.1.8, module version = 1.0.1
[ 7.556] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.615] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon Graphics (rembrandt, LLVM 15.0.7, DRM 3.52, 6.3.6-arch1-1)
[ 8.615] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 8.615] (==) AMDGPU(0): TearFree property default: auto
[ 8.615] (==) AMDGPU(0): VariableRefresh: disabled
[ 8.615] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[ 8.615] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 8.616] (II) AMDGPU(0): Output eDP has no monitor section
[ 8.616] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 8.616] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 8.616] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[ 8.616] (II) AMDGPU(0): Output DisplayPort-3 has no monitor section
[ 8.616] (II) AMDGPU(0): Output DisplayPort-4 has no monitor section
[ 8.616] (II) AMDGPU(0): Output DisplayPort-5 has no monitor section
[ 8.622] (WW) AMDGPU(0): 7 ZaphodHeads crtcs unavailable. Some outputs will stay off.
[ 8.624] (II) AMDGPU(0): EDID for output eDP
[ 8.624] (II) AMDGPU(0): Manufacturer: BOE Model: a9b Serial#: 0
[ 8.624] (II) AMDGPU(0): Year: 2020 Week: 28
[ 8.624] (II) AMDGPU(0): EDID Version: 1.4
[ 8.624] (II) AMDGPU(0): Digital Display Input
[ 8.624] (II) AMDGPU(0): 10 bits per channel
[ 8.624] (II) AMDGPU(0): Digital interface is DisplayPort
[ 8.624] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34 vert.: 21
[ 8.624] (II) AMDGPU(0): Gamma: 2.20
[ 8.624] (II) AMDGPU(0): No DPMS capabilities specified
[ 8.624] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[ 8.624] (II) AMDGPU(0): First detailed timing is preferred mode
[ 8.624] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 8.624] (II) AMDGPU(0): Display is continuous-frequency
[ 8.624] (II) AMDGPU(0): redX: 0.642 redY: 0.335 greenX: 0.300 greenY: 0.621
[ 8.624] (II) AMDGPU(0): blueX: 0.151 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 8.624] (II) AMDGPU(0): Manufacturer's mask: 0
[ 8.624] (II) AMDGPU(0): Supported detailed timing:
[ 8.624] (II) AMDGPU(0): clock: 282.7 MHz Image Size: 344 x 215 mm
[ 8.624] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 8.624] (II) AMDGPU(0): v_active: 1600 v_sync: 1603 v_sync_end 1609 v_blanking: 1732 v_border: 0
[ 8.624] (II) AMDGPU(0): Ranges: V min: 60 V max: 165 Hz, H min: 286 H max: 286 kHz, PixClock max 785 MHz
[ 8.624] (II) AMDGPU(0): BOE CQ
[ 8.624] (II) AMDGPU(0): NE160QDM-NY1
[ 8.624] (II) AMDGPU(0): Number of EDID sections to follow: 2
[ 8.624] (II) AMDGPU(0): EDID (in hex):
[ 8.624] (II) AMDGPU(0): 00ffffffffffff0009e59b0a00000000
[ 8.624] (II) AMDGPU(0): 1c1e0104b5221578037ce5a4554c9f26
[ 8.624] (II) AMDGPU(0): 0f505400000001010101010101010101
[ 8.624] (II) AMDGPU(0): 0101010101016b6e00a0a04084603020
[ 8.624] (II) AMDGPU(0): 360058d71000001a000000fd0c3ca51f
[ 8.624] (II) AMDGPU(0): 1f4e010a202020202020000000fe0042
[ 8.624] (II) AMDGPU(0): 4f452043510a202020202020000000fe
[ 8.624] (II) AMDGPU(0): 004e4531363051444d2d4e59310a02d5
[ 8.624] (II) AMDGPU(0): 02031d00e3058000e60605016a6a246d
[ 8.624] (II) AMDGPU(0): 1a000002033ca500046a246a24000000
[ 8.624] (II) AMDGPU(0): 00000000000000000000000000000000
[ 8.624] (II) AMDGPU(0): 00000000000000000000000000000000
[ 8.624] (II) AMDGPU(0): 00000000000000000000000000000000
[ 8.624] (II) AMDGPU(0): 00000000000000000000000000000000
[ 8.624] (II) AMDGPU(0): 00000000000000000000000000000000
[ 8.624] (II) AMDGPU(0): 000000000000000000000000000000ff
[ 8.624] (II) AMDGPU(0): 7013790000030114a52f0185ff099f00
[ 8.624] (II) AMDGPU(0): 2f001f003f0683000200050000000000
[ 8.624] (II) AMDGPU(0): 00000000000000000000000000000000
[ 8.624] (II) AMDGPU(0): 00000000000000000000000000000000
[ 8.624] (II) AMDGPU(0): 00000000000000000000000000000000
[ 8.624] (II) AMDGPU(0): 00000000000000000000000000000000
[ 8.624] (II) AMDGPU(0): 00000000000000000000000000000000
[ 8.624] (II) AMDGPU(0): 00000000000000000000000000003e90
[ 8.624] (II) AMDGPU(0): Printing probed modes for output eDP
[ 8.624] (II) AMDGPU(0): Modeline "2560x1600"x165.0 777.34 2560 2608 2640 2720 1600 1603 1609 1732 -hsync -vsync (285.8 kHz eP)
[ 8.624] (II) AMDGPU(0): Modeline "2560x1600"x60.0 282.67 2560 2608 2640 2720 1600 1603 1609 1732 +hsync -vsync (103.9 kHz eP)
[ 8.624] (II) AMDGPU(0): Modeline "1920x1200"x165.0 777.34 1920 2608 2640 2720 1200 1603 1609 1732 -hsync -vsync (285.8 kHz e)
[ 8.624] (II) AMDGPU(0): Modeline "1920x1080"x165.0 777.34 1920 2608 2640 2720 1080 1603 1609 1732 -hsync -vsync (285.8 kHz e)
[ 8.624] (II) AMDGPU(0): Modeline "1600x1200"x165.0 777.34 1600 2608 2640 2720 1200 1603 1609 1732 -hsync -vsync (285.8 kHz e)
[ 8.624] (II) AMDGPU(0): Modeline "1680x1050"x165.0 777.34 1680 2608 2640 2720 1050 1603 1609 1732 -hsync -vsync (285.8 kHz e)
[ 8.624] (II) AMDGPU(0): Modeline "1280x1024"x165.0 777.34 1280 2608 2640 2720 1024 1603 1609 1732 -hsync -vsync (285.8 kHz e)
[ 8.624] (II) AMDGPU(0): Modeline "1440x900"x165.0 777.34 1440 2608 2640 2720 900 1603 1609 1732 -hsync -vsync (285.8 kHz e)
[ 8.624] (II) AMDGPU(0): Modeline "1280x800"x165.0 777.34 1280 2608 2640 2720 800 1603 1609 1732 -hsync -vsync (285.8 kHz e)
[ 8.624] (II) AMDGPU(0): Modeline "1280x720"x165.0 777.34 1280 2608 2640 2720 720 1603 1609 1732 -hsync -vsync (285.8 kHz e)
[ 8.624] (II) AMDGPU(0): Modeline "1024x768"x165.0 777.34 1024 2608 2640 2720 768 1603 1609 1732 -hsync -vsync (285.8 kHz e)
[ 8.624] (II) AMDGPU(0): Modeline "800x600"x165.0 777.34 800 2608 2640 2720 600 1603 1609 1732 -hsync -vsync (285.8 kHz e)
[ 8.624] (II) AMDGPU(0): Modeline "640x480"x165.0 777.34 640 2608 2640 2720 480 1603 1609 1732 -hsync -vsync (285.8 kHz e)
[ 8.624] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 8.624] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 8.624] (II) AMDGPU(0): EDID for output DisplayPort-2
[ 8.624] (II) AMDGPU(0): EDID for output DisplayPort-3
[ 8.624] (II) AMDGPU(0): EDID for output DisplayPort-4
[ 8.624] (II) AMDGPU(0): EDID for output DisplayPort-5
[ 8.624] (II) AMDGPU(0): Output eDP connected
[ 8.624] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[ 8.624] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[ 8.624] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[ 8.624] (II) AMDGPU(0): Output DisplayPort-3 disconnected
[ 8.624] (II) AMDGPU(0): Output DisplayPort-4 disconnected
[ 8.624] (II) AMDGPU(0): Output DisplayPort-5 disconnected
[ 8.624] (II) AMDGPU(0): Using exact sizes for initial modes
[ 8.624] (II) AMDGPU(0): Output eDP using initial mode 2560x1600 +0+0
[ 8.624] (II) AMDGPU(0): mem size init: gart size :1d9848000 vram size: s:1d8ae000 visible:1d8ae000
[ 8.624] (++) AMDGPU(0): DPI set to (120, 120)
[ 8.624] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 8.624] (II) Loading sub module "ramdac"
[ 8.624] (II) LoadModule: "ramdac"
[ 8.624] (II) Module "ramdac" already built-in
[ 8.624] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[ 8.624] (==) NVIDIA(G0): RGB weight 888
[ 8.624] (==) NVIDIA(G0): Default visual is TrueColor
[ 8.624] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 8.624] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 8.624] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[ 8.624] (**) NVIDIA(G0): Enabling 2D acceleration
[ 8.624] (II) Loading sub module "glxserver_nvidia"
[ 8.624] (II) LoadModule: "glxserver_nvidia"
[ 8.624] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 8.637] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 8.637] compiled for 1.6.99.901, module version = 1.0.0
[ 8.637] Module class: X.Org Server Extension
[ 8.637] (II) NVIDIA GLX Module 530.41.03 Thu Mar 16 19:27:05 UTC 2023
[ 8.638] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 8.654] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 8.654] (--) NVIDIA(0): DFP-0
[ 8.654] (--) NVIDIA(0): DFP-1
[ 8.654] (--) NVIDIA(0): DFP-2
[ 8.654] (--) NVIDIA(0): DFP-3
[ 8.654] (--) NVIDIA(0): DFP-4
[ 8.654] (--) NVIDIA(0): DFP-5
[ 8.655] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce RTX 3070 Ti Laptop GPU (GA104-B) at
[ 8.655] (II) NVIDIA(G0): PCI:1:0:0 (GPU-0)
[ 8.655] (--) NVIDIA(G0): Memory: 8388608 kBytes
[ 8.655] (--) NVIDIA(G0): VideoBIOS: 94.04.83.00.11
[ 8.655] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[ 8.655] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 8.655] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 8.655] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[ 8.655] (--) NVIDIA(GPU-0):
[ 8.655] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 8.655] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 8.655] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 8.655] (--) NVIDIA(GPU-0):
[ 8.655] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 8.655] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 8.655] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[ 8.655] (--) NVIDIA(GPU-0):
[ 8.655] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 8.655] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 8.655] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 8.655] (--) NVIDIA(GPU-0):
[ 8.655] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 8.655] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 8.655] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 8.655] (--) NVIDIA(GPU-0):
[ 8.655] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 8.655] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 8.655] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[ 8.655] (--) NVIDIA(GPU-0):
[ 8.660] (II) NVIDIA(G0): Validated MetaModes:
[ 8.660] (II) NVIDIA(G0): "NULL"
[ 8.660] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[ 8.660] (++) NVIDIA(G0): DPI set to (120, 120); computed from -dpi X commandline option
[ 8.660] (II) UnloadModule: "modesetting"
[ 8.660] (II) Unloading modesetting
[ 8.660] (II) AMDGPU(0): [DRI2] Setup complete
[ 8.660] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 8.660] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 8.681] (II) AMDGPU(0): Front buffer pitch: 10240 bytes
[ 8.681] (II) AMDGPU(0): SYNC extension fences enabled
[ 8.681] (II) AMDGPU(0): Present extension enabled
[ 8.681] (==) AMDGPU(0): DRI3 enabled
[ 8.681] (==) AMDGPU(0): Backing store enabled
[ 8.681] (II) AMDGPU(0): Direct rendering enabled
[ 8.687] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 8.687] (II) AMDGPU(0): Acceleration enabled
[ 8.687] (==) AMDGPU(0): DPMS enabled
[ 8.687] (==) AMDGPU(0): Silken mouse enabled
[ 8.687] (II) AMDGPU(0): Set up textured video (glamor)
[ 8.695] (WW) AMDGPU(0): Option "HotplugDriver" is not used
[ 8.695] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 8.695] (II) NVIDIA: access.
[ 8.703] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 8.703] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
[ 8.703] (II) NVIDIA(G0): configuration option may not be set correctly. When the
[ 8.703] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
[ 8.703] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
[ 8.703] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
[ 8.703] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 8.703] (II) NVIDIA(G0): Config Options in the README.
[ 8.716] (II) NVIDIA(G0): Setting mode "NULL"
[ 8.730] (==) NVIDIA(G0): Disabling shared memory pixmaps
[ 8.730] (==) NVIDIA(G0): Backing store enabled
[ 8.730] (==) NVIDIA(G0): Silken mouse enabled
[ 8.730] (==) NVIDIA(G0): DPMS enabled
[ 8.730] (II) Loading sub module "dri2"
[ 8.730] (II) LoadModule: "dri2"
[ 8.730] (II) Module "dri2" already built-in
[ 8.730] (II) NVIDIA(G0): [DRI2] Setup complete
[ 8.730] (II) NVIDIA(G0): [DRI2] VDPAU driver: nvidia
[ 8.730] (II) Initializing extension Generic Event Extension
[ 8.730] (II) Initializing extension SHAPE
[ 8.730] (II) Initializing extension MIT-SHM
[ 8.730] (II) Initializing extension XInputExtension
[ 8.730] (II) Initializing extension XTEST
[ 8.730] (II) Initializing extension BIG-REQUESTS
[ 8.730] (II) Initializing extension SYNC
[ 8.730] (II) Initializing extension XKEYBOARD
[ 8.730] (II) Initializing extension XC-MISC
[ 8.730] (II) Initializing extension SECURITY
[ 8.730] (II) Initializing extension XFIXES
[ 8.730] (II) Initializing extension RENDER
[ 8.730] (II) Initializing extension RANDR
[ 8.730] (II) Initializing extension COMPOSITE
[ 8.731] (II) Initializing extension DAMAGE
[ 8.731] (II) Initializing extension MIT-SCREEN-SAVER
[ 8.731] (II) Initializing extension DOUBLE-BUFFER
[ 8.731] (II) Initializing extension RECORD
[ 8.731] (II) Initializing extension DPMS
[ 8.731] (II) Initializing extension Present
[ 8.731] (II) Initializing extension DRI3
[ 8.731] (II) Initializing extension X-Resource
[ 8.731] (II) Initializing extension XVideo
[ 8.731] (II) Initializing extension XVideo-MotionCompensation
[ 8.731] (II) Initializing extension GLX
[ 8.731] (II) Initializing extension GLX
[ 8.731] (II) Indirect GLX disabled.
[ 8.734] (II) AIGLX: Loaded and initialized radeonsi
[ 8.734] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 8.734] (II) Initializing extension XFree86-VidModeExtension
[ 8.734] (II) Initializing extension XFree86-DGA
[ 8.734] (II) Initializing extension XFree86-DRI
[ 8.734] (II) Initializing extension DRI2
[ 8.734] (II) Initializing extension NV-GLX
[ 8.734] (II) Initializing extension NV-CONTROL
[ 8.734] (II) AMDGPU(0): Setting screen physical size to 541 x 338
[ 8.776] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 8.776] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 8.776] (**) Video Bus: Applying InputClass "libinput touchpad catchall"
[ 8.776] (II) LoadModule: "libinput"
[ 8.777] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 8.779] (II) Module libinput: vendor="X.Org Foundation"
[ 8.779] compiled for 1.21.1.8, module version = 1.3.0
[ 8.779] Module class: X.Org XInput Driver
[ 8.779] ABI class: X.Org XInput driver, version 24.4
[ 8.779] (II) Using input driver 'libinput' for 'Video Bus'
[ 8.779] (**) Video Bus: always reports core events
[ 8.779] (**) Option "Device" "/dev/input/event4"
[ 8.783] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 8.783] (II) event4 - Video Bus: device is a keyboard
[ 8.783] (II) event4 - Video Bus: device removed
[ 8.860] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/LNXVIDEO:00/input/input4/event4"
[ 8.860] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 8.862] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 8.862] (II) event4 - Video Bus: device is a keyboard
[ 8.862] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 8.862] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.862] (**) Power Button: Applying InputClass "libinput touchpad catchall"
[ 8.862] (II) Using input driver 'libinput' for 'Power Button'
[ 8.862] (**) Power Button: always reports core events
[ 8.862] (**) Option "Device" "/dev/input/event0"
[ 8.862] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 8.862] (II) event0 - Power Button: device is a keyboard
[ 8.862] (II) event0 - Power Button: device removed
[ 8.887] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 8.887] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 8.888] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 8.888] (II) event0 - Power Button: device is a keyboard
[ 8.888] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 8.888] (**) Lid Switch: Applying InputClass "libinput touchpad catchall"
[ 8.888] (II) Using input driver 'libinput' for 'Lid Switch'
[ 8.888] (**) Lid Switch: always reports core events
[ 8.888] (**) Option "Device" "/dev/input/event1"
[ 8.888] (II) event1 - Lid Switch: is tagged by udev as: Switch
[ 8.888] (II) event1 - Lid Switch: device is a switch device
[ 8.888] (II) event1 - Lid Switch: device removed
[ 8.913] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1"
[ 8.913] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 8)
[ 8.915] (II) event1 - Lid Switch: is tagged by udev as: Switch
[ 8.915] (II) event1 - Lid Switch: device is a switch device
[ 8.915] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[ 8.915] (**) HDA NVidia HDMI/DP,pcm=3: Applying InputClass "libinput touchpad catchall"
[ 8.915] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=3'
[ 8.915] (**) HDA NVidia HDMI/DP,pcm=3: always reports core events
[ 8.915] (**) Option "Device" "/dev/input/event9"
[ 8.916] (II) event9 - HDA NVidia HDMI/DP,pcm=3: is tagged by udev as: Switch
[ 8.967] (II) event9 - not using input device '/dev/input/event9'.
[ 8.967] (EE) libinput: HDA NVidia HDMI/DP,pcm=3: Failed to create a device for /dev/input/event9
[ 8.967] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=3"
[ 8.967] (II) UnloadModule: "libinput"
[ 8.968] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[ 8.968] (**) HDA NVidia HDMI/DP,pcm=7: Applying InputClass "libinput touchpad catchall"
[ 8.968] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=7'
[ 8.968] (**) HDA NVidia HDMI/DP,pcm=7: always reports core events
[ 8.968] (**) Option "Device" "/dev/input/event10"
[ 8.968] (II) event10 - HDA NVidia HDMI/DP,pcm=7: is tagged by udev as: Switch
[ 9.020] (II) event10 - not using input device '/dev/input/event10'.
[ 9.020] (EE) libinput: HDA NVidia HDMI/DP,pcm=7: Failed to create a device for /dev/input/event10
[ 9.020] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=7"
[ 9.020] (II) UnloadModule: "libinput"
[ 9.021] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[ 9.021] (**) HDA NVidia HDMI/DP,pcm=8: Applying InputClass "libinput touchpad catchall"
[ 9.021] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=8'
[ 9.021] (**) HDA NVidia HDMI/DP,pcm=8: always reports core events
[ 9.021] (**) Option "Device" "/dev/input/event11"
[ 9.021] (II) event11 - HDA NVidia HDMI/DP,pcm=8: is tagged by udev as: Switch
[ 9.063] (II) event11 - not using input device '/dev/input/event11'.
[ 9.063] (EE) libinput: HDA NVidia HDMI/DP,pcm=8: Failed to create a device for /dev/input/event11
[ 9.063] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=8"
[ 9.063] (II) UnloadModule: "libinput"
[ 9.064] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[ 9.064] (**) HDA NVidia HDMI/DP,pcm=9: Applying InputClass "libinput touchpad catchall"
[ 9.064] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=9'
[ 9.064] (**) HDA NVidia HDMI/DP,pcm=9: always reports core events
[ 9.064] (**) Option "Device" "/dev/input/event12"
[ 9.064] (II) event12 - HDA NVidia HDMI/DP,pcm=9: is tagged by udev as: Switch
[ 9.100] (II) event12 - not using input device '/dev/input/event12'.
[ 9.100] (EE) libinput: HDA NVidia HDMI/DP,pcm=9: Failed to create a device for /dev/input/event12
[ 9.100] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=9"
[ 9.100] (II) UnloadModule: "libinput"
[ 9.101] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event8)
[ 9.101] (**) HD-Audio Generic HDMI/DP,pcm=3: Applying InputClass "libinput touchpad catchall"
[ 9.101] (II) Using input driver 'libinput' for 'HD-Audio Generic HDMI/DP,pcm=3'
[ 9.101] (**) HD-Audio Generic HDMI/DP,pcm=3: always reports core events
[ 9.101] (**) Option "Device" "/dev/input/event8"
[ 9.102] (II) event8 - HD-Audio Generic HDMI/DP,pcm=3: is tagged by udev as: Switch
[ 9.140] (II) event8 - not using input device '/dev/input/event8'.
[ 9.140] (EE) libinput: HD-Audio Generic HDMI/DP,pcm=3: Failed to create a device for /dev/input/event8
[ 9.140] (EE) PreInit returned 2 for "HD-Audio Generic HDMI/DP,pcm=3"
[ 9.140] (II) UnloadModule: "libinput"
[ 9.141] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Keyboard (/dev/input/event13)
[ 9.141] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.141] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput touchpad catchall"
[ 9.141] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Keyboard'
[ 9.141] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: always reports core events
[ 9.141] (**) Option "Device" "/dev/input/event13"
[ 9.141] (II) event13 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard
[ 9.141] (II) event13 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard
[ 9.142] (II) event13 - ITE Tech. Inc. ITE Device(8910) Keyboard: device removed
[ 9.157] (**) Option "NaturalScrolling" "on"
[ 9.157] (II) libinput: ITE Tech. Inc. ITE Device(8910) Keyboard: needs a virtual subdevice
[ 9.157] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:34:00.3/usb1/1-4/1-4:1.0/0003:048D:C102.0002/input/input17/event13"
[ 9.157] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Keyboard" (type: MOUSE, id 9)
[ 9.157] (**) Option "AccelerationScheme" "none"
[ 9.157] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) selected scheme none/0
[ 9.157] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) acceleration factor: 2.000
[ 9.157] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) acceleration threshold: 4
[ 9.158] (II) event13 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard
[ 9.158] (II) event13 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard
[ 9.158] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Wireless Radio Control (/dev/input/event16)
[ 9.158] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 9.158] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "libinput touchpad catchall"
[ 9.158] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Wireless Radio Control'
[ 9.158] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: always reports core events
[ 9.158] (**) Option "Device" "/dev/input/event16"
[ 9.159] (II) event16 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: is tagged by udev as: Keyboard
[ 9.159] (II) event16 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device is a keyboard
[ 9.159] (II) event16 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device removed
[ 9.193] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:34:00.3/usb1/1-4/1-4:1.0/0003:048D:C102.0002/input/input18/event16"
[ 9.193] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Wireless Radio Control" (type: KEYBOARD, id 10)
[ 9.194] (II) event16 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: is tagged by udev as: Keyboard
[ 9.194] (II) event16 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device is a keyboard
[ 9.195] (II) config/udev: Adding input device JBL Quantum 400 Consumer Control (/dev/input/event18)
[ 9.195] (**) JBL Quantum 400 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 9.195] (**) JBL Quantum 400 Consumer Control: Applying InputClass "libinput touchpad catchall"
[ 9.195] (II) Using input driver 'libinput' for 'JBL Quantum 400 Consumer Control'
[ 9.195] (**) JBL Quantum 400 Consumer Control: always reports core events
[ 9.195] (**) Option "Device" "/dev/input/event18"
[ 9.196] (II) event18 - JBL Quantum 400 Consumer Control: is tagged by udev as: Keyboard
[ 9.196] (II) event18 - JBL Quantum 400 Consumer Control: device is a keyboard
[ 9.196] (II) event18 - JBL Quantum 400 Consumer Control: device removed
[ 9.237] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-2/3-2.1/3-2.1:1.5/0003:0ECB:2039.0005/input/input22/event18"
[ 9.237] (II) XINPUT: Adding extended input device "JBL Quantum 400 Consumer Control" (type: KEYBOARD, id 11)
[ 9.238] (II) event18 - JBL Quantum 400 Consumer Control: is tagged by udev as: Keyboard
[ 9.238] (II) event18 - JBL Quantum 400 Consumer Control: device is a keyboard
[ 9.239] (II) config/udev: Adding input device Logitech G305 (/dev/input/event19)
[ 9.239] (**) Logitech G305: Applying InputClass "libinput pointer catchall"
[ 9.239] (**) Logitech G305: Applying InputClass "libinput keyboard catchall"
[ 9.239] (**) Logitech G305: Applying InputClass "libinput touchpad catchall"
[ 9.239] (II) Using input driver 'libinput' for 'Logitech G305'
[ 9.239] (**) Logitech G305: always reports core events
[ 9.239] (**) Option "Device" "/dev/input/event19"
[ 9.239] (II) event19 - Logitech G305: is tagged by udev as: Keyboard Mouse
[ 9.239] (II) event19 - Logitech G305: device is a pointer
[ 9.239] (II) event19 - Logitech G305: device is a keyboard
[ 9.240] (II) event19 - Logitech G305: device removed
[ 9.273] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.273] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.273] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.273] (**) Option "NaturalScrolling" "on"
[ 9.273] (II) libinput: Logitech G305: needs a virtual subdevice
[ 9.273] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-2/3-2.2/3-2.2:1.2/0003:046D:C53F.0008/0003:046D:4074.0009/input/input33/event19"
[ 9.273] (II) XINPUT: Adding extended input device "Logitech G305" (type: MOUSE, id 12)
[ 9.274] (**) Option "AccelerationScheme" "none"
[ 9.274] (**) Logitech G305: (accel) selected scheme none/0
[ 9.274] (**) Logitech G305: (accel) acceleration factor: 2.000
[ 9.274] (**) Logitech G305: (accel) acceleration threshold: 4
[ 9.275] (II) event19 - Logitech G305: is tagged by udev as: Keyboard Mouse
[ 9.275] (II) event19 - Logitech G305: device is a pointer
[ 9.275] (II) event19 - Logitech G305: device is a keyboard
[ 9.275] (II) config/udev: Adding input device Logitech G305 (/dev/input/mouse2)
[ 9.275] (**) Logitech G305: Applying InputClass "libinput touchpad catchall"
[ 9.275] (II) Using input driver 'libinput' for 'Logitech G305'
[ 9.275] (**) Logitech G305: always reports core events
[ 9.275] (**) Option "Device" "/dev/input/mouse2"
[ 9.306] (II) mouse2 - not using input device '/dev/input/mouse2'.
[ 9.307] (EE) libinput: Logitech G305: Failed to create a device for /dev/input/mouse2
[ 9.307] (EE) PreInit returned 2 for "Logitech G305"
[ 9.307] (II) UnloadModule: "libinput"
[ 9.307] (II) config/udev: Adding input device HD-Audio Generic Headset Mic (/dev/input/event14)
[ 9.307] (**) HD-Audio Generic Headset Mic: Applying InputClass "libinput touchpad catchall"
[ 9.307] (II) Using input driver 'libinput' for 'HD-Audio Generic Headset Mic'
[ 9.307] (**) HD-Audio Generic Headset Mic: always reports core events
[ 9.307] (**) Option "Device" "/dev/input/event14"
[ 9.308] (II) event14 - HD-Audio Generic Headset Mic: is tagged by udev as: Switch
[ 9.350] (II) event14 - not using input device '/dev/input/event14'.
[ 9.350] (EE) libinput: HD-Audio Generic Headset Mic: Failed to create a device for /dev/input/event14
[ 9.350] (EE) PreInit returned 2 for "HD-Audio Generic Headset Mic"
[ 9.350] (II) UnloadModule: "libinput"
[ 9.351] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event15)
[ 9.351] (**) HD-Audio Generic Headphone: Applying InputClass "libinput touchpad catchall"
[ 9.351] (II) Using input driver 'libinput' for 'HD-Audio Generic Headphone'
[ 9.351] (**) HD-Audio Generic Headphone: always reports core events
[ 9.351] (**) Option "Device" "/dev/input/event15"
[ 9.351] (II) event15 - HD-Audio Generic Headphone: is tagged by udev as: Switch
[ 9.387] (II) event15 - not using input device '/dev/input/event15'.
[ 9.387] (EE) libinput: HD-Audio Generic Headphone: Failed to create a device for /dev/input/event15
[ 9.387] (EE) PreInit returned 2 for "HD-Audio Generic Headphone"
[ 9.387] (II) UnloadModule: "libinput"
[ 9.388] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8295) Keyboard (/dev/input/event17)
[ 9.388] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.388] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: Applying InputClass "libinput touchpad catchall"
[ 9.388] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8295) Keyboard'
[ 9.388] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: always reports core events
[ 9.388] (**) Option "Device" "/dev/input/event17"
[ 9.389] (II) event17 - ITE Tech. Inc. ITE Device(8295) Keyboard: is tagged by udev as: Keyboard
[ 9.389] (II) event17 - ITE Tech. Inc. ITE Device(8295) Keyboard: device is a keyboard
[ 9.389] (II) event17 - ITE Tech. Inc. ITE Device(8295) Keyboard: device removed
[ 9.404] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.3/0000:35:00.0/usb5/5-1/5-1:1.0/0003:048D:C975.0003/input/input21/event17"
[ 9.404] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8295) Keyboard" (type: KEYBOARD, id 13)
[ 9.405] (II) event17 - ITE Tech. Inc. ITE Device(8295) Keyboard: is tagged by udev as: Keyboard
[ 9.405] (II) event17 - ITE Tech. Inc. ITE Device(8295) Keyboard: device is a keyboard
[ 9.406] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event7)
[ 9.406] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 9.406] (**) Ideapad extra buttons: Applying InputClass "libinput touchpad catchall"
[ 9.406] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 9.406] (**) Ideapad extra buttons: always reports core events
[ 9.406] (**) Option "Device" "/dev/input/event7"
[ 9.406] (II) event7 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 9.406] (II) event7 - Ideapad extra buttons: device is a keyboard
[ 9.406] (II) event7 - Ideapad extra buttons: device removed
[ 9.457] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input8/event7"
[ 9.457] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 14)
[ 9.458] (II) event7 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 9.458] (II) event7 - Ideapad extra buttons: device is a keyboard
[ 9.458] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Touchpad (/dev/input/event6)
[ 9.458] (**) SYNA2BA6:00 06CB:CE78 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 9.458] (**) SYNA2BA6:00 06CB:CE78 Touchpad: Applying InputClass "touchpad catchall"
[ 9.458] (**) SYNA2BA6:00 06CB:CE78 Touchpad: Applying InputClass "Default clickpad buttons"
[ 9.458] (**) SYNA2BA6:00 06CB:CE78 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 9.458] (**) SYNA2BA6:00 06CB:CE78 Touchpad: Applying InputClass "touchpad catchall"
[ 9.458] (**) SYNA2BA6:00 06CB:CE78 Touchpad: Applying InputClass "Default clickpad buttons"
[ 9.458] (**) SYNA2BA6:00 06CB:CE78 Touchpad: Applying InputClass "touchpad"
[ 9.458] (II) LoadModule: "synaptics"
[ 9.458] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 9.468] (II) Module synaptics: vendor="X.Org Foundation"
[ 9.468] compiled for 1.21.1.3, module version = 1.9.2
[ 9.469] Module class: X.Org XInput Driver
[ 9.469] ABI class: X.Org XInput driver, version 24.4
[ 9.469] (II) Using input driver 'synaptics' for 'SYNA2BA6:00 06CB:CE78 Touchpad'
[ 9.469] (**) SYNA2BA6:00 06CB:CE78 Touchpad: always reports core events
[ 9.469] (**) Option "Device" "/dev/input/event6"
[ 9.520] (II) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: found clickpad property
[ 9.520] (--) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: x-axis range 0 - 1404 (res 12)
[ 9.520] (--) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: y-axis range 0 - 864 (res 12)
[ 9.520] (II) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: device does not report pressure, will use touch data.
[ 9.520] (II) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: device does not report finger width.
[ 9.520] (--) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: buttons: left double triple
[ 9.520] (--) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: Vendor 0x6cb Product 0xce78
[ 9.520] (--) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: invalid pressure range. defaulting to 0 - 255
[ 9.520] (--) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: invalid finger width range. defaulting to 0 - 15
[ 9.520] (**) Option "FingerLow" "30"
[ 9.520] (**) Option "FingerHigh" "50"
[ 9.520] (**) Option "MaxTapTime" "125"
[ 9.520] (**) Option "EmulateTwoFingerMinZ" "40"
[ 9.520] (**) Option "EmulateTwoFingerMinW" "8"
[ 9.520] (**) Option "VertEdgeScroll" "on"
[ 9.520] (**) Option "HorizEdgeScroll" "on"
[ 9.520] (**) Option "VertTwoFingerScroll" "on"
[ 9.520] (**) Option "HorizTwoFingerScroll" "on"
[ 9.520] (**) Option "TapButton1" "1"
[ 9.521] (**) Option "TapButton2" "3"
[ 9.521] (**) Option "TapButton3" "2"
[ 9.521] (**) Option "CircularScrolling" "on"
[ 9.521] (**) Option "CircScrollTrigger" "2"
[ 9.521] (**) Option "CoastingSpeed" "0"
[ 9.521] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 9.521] (--) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: touchpad found
[ 9.521] (**) SYNA2BA6:00 06CB:CE78 Touchpad: always reports core events
[ 9.553] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:00/i2c-0/i2c-SYNA2BA6:00/0018:06CB:CE78.0001/input/input10/event6"
[ 9.553] (II) XINPUT: Adding extended input device "SYNA2BA6:00 06CB:CE78 Touchpad" (type: TOUCHPAD, id 15)
[ 9.553] (**) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 9.553] (**) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: (accel) MaxSpeed is now 1.75
[ 9.553] (**) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: (accel) AccelFactor is now 0.121
[ 9.554] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) keeping acceleration scheme 1
[ 9.554] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) acceleration profile 1
[ 9.554] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) acceleration factor: 2.000
[ 9.554] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) acceleration threshold: 4
[ 9.554] (--) synaptics: SYNA2BA6:00 06CB:CE78 Touchpad: touchpad found
[ 9.554] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Touchpad (/dev/input/mouse1)
[ 9.554] (**) SYNA2BA6:00 06CB:CE78 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 9.555] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Mouse (/dev/input/event5)
[ 9.555] (**) SYNA2BA6:00 06CB:CE78 Mouse: Applying InputClass "libinput pointer catchall"
[ 9.555] (**) SYNA2BA6:00 06CB:CE78 Mouse: Applying InputClass "libinput touchpad catchall"
[ 9.555] (II) Using input driver 'libinput' for 'SYNA2BA6:00 06CB:CE78 Mouse'
[ 9.555] (**) SYNA2BA6:00 06CB:CE78 Mouse: always reports core events
[ 9.555] (**) Option "Device" "/dev/input/event5"
[ 9.555] (II) event5 - SYNA2BA6:00 06CB:CE78 Mouse: is tagged by udev as: Mouse Pointingstick
[ 9.555] (II) event5 - SYNA2BA6:00 06CB:CE78 Mouse: device is a pointer
[ 9.556] (II) event5 - SYNA2BA6:00 06CB:CE78 Mouse: device removed
[ 9.597] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.597] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.597] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.597] (**) Option "NaturalScrolling" "on"
[ 9.597] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:00/i2c-0/i2c-SYNA2BA6:00/0018:06CB:CE78.0001/input/input9/event5"
[ 9.597] (II) XINPUT: Adding extended input device "SYNA2BA6:00 06CB:CE78 Mouse" (type: MOUSE, id 16)
[ 9.597] (**) Option "AccelerationScheme" "none"
[ 9.597] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) selected scheme none/0
[ 9.597] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) acceleration factor: 2.000
[ 9.597] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) acceleration threshold: 4
[ 9.598] (II) event5 - SYNA2BA6:00 06CB:CE78 Mouse: is tagged by udev as: Mouse Pointingstick
[ 9.598] (II) event5 - SYNA2BA6:00 06CB:CE78 Mouse: device is a pointer
[ 9.599] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Mouse (/dev/input/mouse0)
[ 9.599] (**) SYNA2BA6:00 06CB:CE78 Mouse: Applying InputClass "libinput touchpad catchall"
[ 9.599] (II) Using input driver 'libinput' for 'SYNA2BA6:00 06CB:CE78 Mouse'
[ 9.599] (**) SYNA2BA6:00 06CB:CE78 Mouse: always reports core events
[ 9.599] (**) Option "Device" "/dev/input/mouse0"
[ 9.630] (II) mouse0 - not using input device '/dev/input/mouse0'.
[ 9.630] (EE) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Failed to create a device for /dev/input/mouse0
[ 9.630] (EE) PreInit returned 2 for "SYNA2BA6:00 06CB:CE78 Mouse"
[ 9.630] (II) UnloadModule: "libinput"
[ 9.631] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 9.631] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.631] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput touchpad catchall"
[ 9.631] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 9.631] (**) AT Translated Set 2 keyboard: always reports core events
[ 9.631] (**) Option "Device" "/dev/input/event2"
[ 9.632] (II) event2 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 9.632] (II) event2 - AT Translated Set 2 keyboard: device is a keyboard
[ 9.632] (II) event2 - AT Translated Set 2 keyboard: device removed
[ 9.657] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 9.657] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[ 9.658] (II) event2 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 9.658] (II) event2 - AT Translated Set 2 keyboard: device is a keyboard
[ 9.659] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 9.659] (**) PC Speaker: Applying InputClass "libinput touchpad catchall"
[ 9.659] (II) Using input driver 'libinput' for 'PC Speaker'
[ 9.659] (**) PC Speaker: always reports core events
[ 9.659] (**) Option "Device" "/dev/input/event3"
[ 9.659] (II) event3 - PC Speaker: not tagged as supported input device
[ 9.690] (II) event3 - not using input device '/dev/input/event3'.
[ 9.690] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event3
[ 9.690] (EE) PreInit returned 2 for "PC Speaker"
[ 9.690] (II) UnloadModule: "libinput"
[ 9.712] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.712] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput touchpad catchall"
[ 9.712] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Keyboard'
[ 9.712] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: always reports core events
[ 9.712] (**) Option "Device" "/dev/input/event13"
[ 9.712] (II) libinput: ITE Tech. Inc. ITE Device(8910) Keyboard: is a virtual subdevice
[ 9.712] (**) Option "NaturalScrolling" "on"
[ 9.712] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:34:00.3/usb1/1-4/1-4:1.0/0003:048D:C102.0002/input/input17/event13"
[ 9.712] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Keyboard" (type: KEYBOARD, id 18)
[ 9.712] (**) Logitech G305: Applying InputClass "libinput pointer catchall"
[ 9.712] (**) Logitech G305: Applying InputClass "libinput keyboard catchall"
[ 9.712] (**) Logitech G305: Applying InputClass "libinput touchpad catchall"
[ 9.712] (II) Using input driver 'libinput' for 'Logitech G305'
[ 9.712] (**) Logitech G305: always reports core events
[ 9.712] (**) Option "Device" "/dev/input/event19"
[ 9.712] (II) libinput: Logitech G305: is a virtual subdevice
[ 9.712] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.712] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.712] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.712] (**) Option "NaturalScrolling" "on"
[ 9.712] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-2/3-2.2/3-2.2:1.2/0003:046D:C53F.0008/0003:046D:4074.0009/input/input33/event19"
[ 9.712] (II) XINPUT: Adding extended input device "Logitech G305" (type: KEYBOARD, id 19)
[ 26.632] (II) AMDGPU(0): EDID vendor "BOE", prod id 2715
[ 26.632] (II) AMDGPU(0): Using EDID range info for horizontal sync
[ 26.632] (II) AMDGPU(0): Using EDID range info for vertical refresh
[ 26.632] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 26.632] (II) AMDGPU(0): Modeline "2560x1600"x0.0 282.67 2560 2608 2640 2720 1600 1603 1609 1732 +hsync -vsync (103.9 kHz eP)
[ 26.633] (II) AMDGPU(0): EDID vendor "BOE", prod id 2715
[ 26.633] (II) AMDGPU(0): Using hsync ranges from config file
[ 26.633] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 26.633] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 26.633] (II) AMDGPU(0): Modeline "2560x1600"x0.0 282.67 2560 2608 2640 2720 1600 1603 1609 1732 +hsync -vsync (103.9 kHz eP)
[ 26.633] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 26.633] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 26.633] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[ 26.633] (--) NVIDIA(GPU-0):
[ 26.633] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 26.633] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 26.633] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 26.633] (--) NVIDIA(GPU-0):
[ 26.633] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 26.633] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 26.633] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[ 26.633] (--) NVIDIA(GPU-0):
[ 26.633] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 26.633] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 26.633] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 26.633] (--) NVIDIA(GPU-0):
[ 26.633] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 26.633] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 26.633] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 26.633] (--) NVIDIA(GPU-0):
[ 26.633] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 26.633] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 26.633] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[ 26.633] (--) NVIDIA(GPU-0):
[ 27.161] (II) AMDGPU(0): EDID vendor "BOE", prod id 2715
[ 27.161] (II) AMDGPU(0): Using hsync ranges from config file
[ 27.161] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 27.161] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 27.161] (II) AMDGPU(0): Modeline "2560x1600"x0.0 282.67 2560 2608 2640 2720 1600 1603 1609 1732 +hsync -vsync (103.9 kHz eP)
[ 27.162] (II) AMDGPU(0): EDID vendor "BOE", prod id 2715
[ 27.162] (II) AMDGPU(0): Using hsync ranges from config file
[ 27.162] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 27.162] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 27.162] (II) AMDGPU(0): Modeline "2560x1600"x0.0 282.67 2560 2608 2640 2720 1600 1603 1609 1732 +hsync -vsync (103.9 kHz eP)
[ 27.163] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 27.163] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 27.163] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[ 27.163] (--) NVIDIA(GPU-0):
[ 27.163] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 27.163] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 27.163] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 27.163] (--) NVIDIA(GPU-0):
[ 27.163] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 27.163] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 27.163] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[ 27.163] (--) NVIDIA(GPU-0):
[ 27.163] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 27.163] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 27.163] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 27.163] (--) NVIDIA(GPU-0):
[ 27.163] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 27.163] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 27.163] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 27.163] (--) NVIDIA(GPU-0):
[ 27.163] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 27.163] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 27.163] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[ 27.163] (--) NVIDIA(GPU-0):
[ 27.208] (II) AMDGPU(0): EDID vendor "BOE", prod id 2715
[ 27.209] (II) AMDGPU(0): Using hsync ranges from config file
[ 27.209] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 27.209] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 27.209] (II) AMDGPU(0): Modeline "2560x1600"x0.0 282.67 2560 2608 2640 2720 1600 1603 1609 1732 +hsync -vsync (103.9 kHz eP)
[ 27.210] (II) AMDGPU(0): EDID vendor "BOE", prod id 2715
[ 27.210] (II) AMDGPU(0): Using hsync ranges from config file
[ 27.210] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 27.210] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 27.210] (II) AMDGPU(0): Modeline "2560x1600"x0.0 282.67 2560 2608 2640 2720 1600 1603 1609 1732 +hsync -vsync (103.9 kHz eP)
[ 27.210] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 27.210] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 27.210] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[ 27.210] (--) NVIDIA(GPU-0):
[ 27.210] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 27.210] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 27.210] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 27.210] (--) NVIDIA(GPU-0):
[ 27.210] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 27.210] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 27.210] (--) NVIDIA(GPU-0): DFP-2: 2670.0 MHz maximum pixel clock
[ 27.210] (--) NVIDIA(GPU-0):
[ 27.210] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 27.210] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 27.210] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 27.210] (--) NVIDIA(GPU-0):
[ 27.210] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 27.210] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 27.210] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 27.210] (--) NVIDIA(GPU-0):
[ 27.210] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 27.210] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 27.210] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[ 27.210] (--) NVIDIA(GPU-0): Offline
#6 2023-06-10 20:17:19
- BitLegend31
- Member
- Registered: 2023-02-15
- Posts: 19
Re: Few problems with arch and laptop!
seth wrote:
Then please also post the complete system journal for a boot:
sudo journalctl -b | curl -F 'f:1=<-' ix.io(ideally one with the artifacts, eg. "… -b -1 …" for the previous one
When it freezes after the S3 can you
a) switch to a different VT (ctrl+alt+F1,F2,F3,…)
b) ssh into the system
c) https://wiki.archlinux.org/title/SysRq ?
As far as I remember, after freezing i couldn't enter tty*, so the only way to bypass it was to hard restart, but i might remember wrong, lemme try it now
Offline
#7 2023-06-10 20:21:52
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,560
Re: Few problems with arch and laptop!
Offline
#8 2023-06-10 20:25:00
- BitLegend31
- Member
- Registered: 2023-02-15
- Posts: 19
Re: Few problems with arch and laptop!
Well, if it's due to unregular system updates...The thing is I do them once in 3 days, but it seems i need to do them every day? Is it the problem you think?
Offline
#9 2023-06-10 20:32:38
- BitLegend31
- Member
- Registered: 2023-02-15
- Posts: 19
Re: Few problems with arch and laptop!
seth wrote:
Ok, but what about the second problem? I suppose it's related with nvidia drivers or something like that?
Offline
#10 2023-06-10 20:48:07
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,560
Re: Few problems with arch and laptop!
This has nothing to do w/ "unregular system updates", but you could try the behavior w/ the LTS kernel.
(The reference is only by vaguely similar symptoms and because you both have rembrand chips, though)
The nvidia driver doesn't play any role in your output, you've a hybrid system and are running in regular PRIME on the andgpu driver.
The problems might have the same cause and if the boot messages are affected, it's not because of xf86-video-amdgpu.
Edit: the system journal of an affected boot will help, because it should have similar error messages.
Last edited by seth (2023-06-10 20:49:21)
Offline
#11 2023-06-10 20:51:01
- BitLegend31
- Member
- Registered: 2023-02-15
- Posts: 19
Re: Few problems with arch and laptop!
seth wrote:
This has nothing to do w/ "unregular system updates", but you could try the behavior w/ the LTS kernel.
(The reference is only by vaguely similar symptoms and because you both have rembrand chips, though)The nvidia driver doesn't play any role in your output, you've a hybrid system and are running in regular PRIME on the andgpu driver.
The problems might have the same cause and if the boot messages are affected, it's not because of xf86-video-amdgpu.
I don't know if this is related, but my laptop sometimes cannot wake up even on Windows (i use dual boot). I don't know if it is necessary but i turned on the safe boot option in uefi (was turned off while installing arch). If nothing changes, i might as well try LTS kernel, but only if u think it might change anything
Offline
#12 2023-06-10 20:55:39
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,560
Re: Few problems with arch and laptop!
i use dual boot
3rd link below. Mandatory.
Disable it (it's NOT the BIOS setting!) and reboot windows and linux twice for voodo reasons.
jl2 wrote:
it happens … since 1 week
If this is a regression, the LTS kernel may not be affected.
Offline
#13 2023-06-10 20:59:04
- BitLegend31
- Member
- Registered: 2023-02-15
- Posts: 19
Re: Few problems with arch and laptop!
seth wrote:
i use dual boot
3rd link below. Mandatory.
Disable it (it's NOT the BIOS setting!) and reboot windows and linux twice for voodo reasons.jl2 wrote:it happens … since 1 week
If this is a regression, the LTS kernel may not be affected.
The fast startup was turned off since arch was installed, so no problems there. I just said it to u for u to understand that the same (half-same) problem persists in Windows as well
Offline
#14 2023-06-10 21:23:48
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,560
Re: Few problems with arch and laptop!
Since windows has a habit of re-enabling it w/ updates, I'd make sure that it still is disabled.
Offline
#15 2023-06-10 21:54:05
- BitLegend31
- Member
- Registered: 2023-02-15
- Posts: 19
Re: Few problems with arch and laptop!
seth wrote:
Since windows has a habit of re-enabling it w/ updates, I'd make sure that it still is disabled.
Its disabled
Offline
Pages: 1