You are not logged in.

Pages: 1

#1 2023-06-12 16:07:00

omniscient_potato
Member
Registered: 2020-07-12
Posts: 63

[SOLVED] Turing GPU not in D3 power state

Hello there,

I have an XPS9500 with a turing GTX1650ti and I'm trying to setup the hybrid graphics, as specified in the wiki.
However, it seems like the GPU is eating up a lot more power than it should. Without the nvidia drivers installed, (I assume the dGPU is not used at all then) I'm getting my power usage down to about 4W, but with the hybrid graphics enable, is always around 14W, even when not running anything on the dedicated GPU.

When querying the power state, I always get D0.

I tried a couple of options, envycontrol, some xorg.conf settings, the udev rules as specfied in the wiki, all making no difference and I must say I am a little confused now when it comes to setting up hybrid graphics.

Maybe somebody can point me into the right direction.

Thanks!

Last edited by omniscient_potato (2023-06-13 15:42:43)

Offline

#2 2023-06-12 19:23:48

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,650

Re: [SOLVED] Turing GPU not in D3 power state

Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
Did you check the state or do you go by the global power consumption only?
https://wiki.archlinux.org/title/PRIME# … Management

I assume the dGPU is not used at all then

Post a journal from such boot, but you should™ be using prime on the nouveau module.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#3 2023-06-13 08:37:48

omniscient_potato
Member
Registered: 2020-07-12
Posts: 63

Re: [SOLVED] Turing GPU not in D3 power state

Thanks for the quick response!

Here you go:

[    16.832] (--) Log file renamed from "/var/log/Xorg.pid-1436.log" to "/var/log/Xorg.0.log"
[    16.834]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[    16.834] Current Operating System: Linux alex-laptop 6.3.6-artix1-1 #1 SMP PREEMPT_DYNAMIC Mon, 05 Jun 2023 19:57:22 +0000 x86_64
[    16.834] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=006a4dcc-b913-44af-ad64-f4ad5ad00a87 rw loglevel=3 quiet cryptdevice=UUID=c452045f-1bad-48c0-9816-f53c67a416dc:cryptroot resume=UUID=11c0ac93-cd2a-451d-9a6e-cf7f855fb26a
[    16.834]
[    16.834] Current version of pixman: 0.42.2
[    16.834]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    16.834] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.834] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 13 10:09:16 2023
[    16.835] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    16.835] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.836] (==) No Layout section.  Using the first Screen section.
[    16.836] (==) No screen section available. Using defaults.
[    16.836] (**) |-->Screen "Default Screen Section" (0)
[    16.836] (**) |   |-->Monitor "<default monitor>"
[    16.836] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    16.836] (==) Automatically adding devices
[    16.836] (==) Automatically enabling devices
[    16.836] (==) Automatically adding GPU devices
[    16.836] (==) Automatically binding GPU devices
[    16.836] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    16.836] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    16.836]    Entry deleted from font path.
[    16.837] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    16.837]    Entry deleted from font path.
[    16.837]    (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    16.837] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    16.837]    Entry deleted from font path.
[    16.837] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    16.837]    Entry deleted from font path.
[    16.837] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    16.837]    Entry deleted from font path.
[    16.837] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    16.837]    Entry deleted from font path.
[    16.837] (==) FontPath set to:

[    16.837] (==) ModulePath set to "/usr/lib/xorg/modules"
[    16.837] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.837] (II) Module ABI versions:
[    16.837]    X.Org ANSI C Emulation: 0.4
[    16.837]    X.Org Video Driver: 25.2
[    16.837]    X.Org XInput driver : 24.4
[    16.837]    X.Org Server Extension : 10.0
[    16.837] (++) using VT number 7

[    16.837] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    16.838] (II) xfree86: Adding drm device (/dev/dri/card1)
[    16.838] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[    16.838] (II) xfree86: Adding drm device (/dev/dri/card0)
[    16.838] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    16.848] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    16.849] (--) PCI:*(0@0:2:0) 8086:9bc4:1028:097d rev 5, Mem @ 0x604a000000/16777216, 0x4000000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[    16.849] (--) PCI: (1@0:0:0) 10de:1f95:1028:097d rev 161, Mem @ 0xb3000000/16777216, 0x70000000/268435456, 0x80000000/33554432, I/O @ 0x00003000/128
[    16.849] (II) Open ACPI successful (/var/run/acpid.socket)
[    16.849] (II) LoadModule: "glx"
[    16.850] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.856] (II) Module glx: vendor="X.Org Foundation"
[    16.856]    compiled for 1.21.1.8, module version = 1.0.0
[    16.856]    ABI class: X.Org Server Extension, version 10.0
[    16.857] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    16.857]    loading driver: nvidia
[    16.857] (==) Matched intel as autoconfigured driver 0
[    16.857] (==) Matched nvidia as autoconfigured driver 1
[    16.857] (==) Matched nouveau as autoconfigured driver 2
[    16.857] (==) Matched nv as autoconfigured driver 3
[    16.857] (==) Matched modesetting as autoconfigured driver 4
[    16.857] (==) Matched fbdev as autoconfigured driver 5
[    16.857] (==) Matched vesa as autoconfigured driver 6
[    16.857] (==) Assigned the driver to the xf86ConfigLayout
[    16.857] (II) LoadModule: "intel"
[    16.857] (WW) Warning, couldn't open module intel
[    16.857] (EE) Failed to load module "intel" (module does not exist, 0)
[    16.857] (II) LoadModule: "nvidia"
[    16.857] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    16.861] (II) Module nvidia: vendor="NVIDIA Corporation"
[    16.861]    compiled for 1.6.99.901, module version = 1.0.0
[    16.861]    Module class: X.Org Video Driver
[    16.861] (II) LoadModule: "nouveau"
[    16.861] (WW) Warning, couldn't open module nouveau
[    16.861] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    16.861] (II) LoadModule: "nv"
[    16.862] (WW) Warning, couldn't open module nv
[    16.862] (EE) Failed to load module "nv" (module does not exist, 0)
[    16.862] (II) LoadModule: "modesetting"
[    16.862] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    16.865] (II) Module modesetting: vendor="X.Org Foundation"
[    16.865]    compiled for 1.21.1.8, module version = 1.21.1
[    16.865]    Module class: X.Org Video Driver
[    16.865]    ABI class: X.Org Video Driver, version 25.2
[    16.865] (II) LoadModule: "fbdev"
[    16.865] (WW) Warning, couldn't open module fbdev
[    16.865] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    16.865] (II) LoadModule: "vesa"
[    16.865] (WW) Warning, couldn't open module vesa
[    16.865] (EE) Failed to load module "vesa" (module does not exist, 0)
[    16.865] (II) NVIDIA dlloader X Driver  530.41.03  Thu Mar 16 19:25:45 UTC 2023
[    16.865] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    16.865] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    16.897] (II) modeset(0): using drv /dev/dri/card0
[    16.898] (II) Loading sub module "fb"
[    16.898] (II) LoadModule: "fb"
[    16.898] (II) Module "fb" already built-in
[    16.898] (II) Loading sub module "wfb"
[    16.898] (II) LoadModule: "wfb"
[    16.898] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    16.899] (II) Module wfb: vendor="X.Org Foundation"
[    16.899]    compiled for 1.21.1.8, module version = 1.0.0
[    16.899]    ABI class: X.Org ANSI C Emulation, version 0.4
[    16.899] (II) modeset(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    16.899] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    16.899] (==) modeset(0): RGB weight 888
[    16.899] (==) modeset(0): Default visual is TrueColor
[    16.899] (II) Loading sub module "glamoregl"
[    16.899] (II) LoadModule: "glamoregl"
[    16.899] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    16.904] (II) Module glamoregl: vendor="X.Org Foundation"
[    16.904]    compiled for 1.21.1.8, module version = 1.0.1
[    16.904]    ABI class: X.Org ANSI C Emulation, version 0.4
[    17.101] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics (CML GT2)
[    17.101] (II) modeset(0): glamor initialized
[    17.101] (==) modeset(0): VariableRefresh: disabled
[    17.101] (==) modeset(0): AsyncFlipSecondaries: disabled
[    17.103] (II) modeset(0): Output eDP-1 has no monitor section
[    17.103] (II) modeset(0): Output DP-1 has no monitor section
[    17.103] (II) modeset(0): Output DP-2 has no monitor section
[    17.103] (II) modeset(0): Output DP-3 has no monitor section
[    17.105] (II) modeset(0): EDID for output eDP-1
[    17.105] (II) modeset(0): Manufacturer: SHP  Model: 14d0  Serial#: 0
[    17.105] (II) modeset(0): Year: 2020  Week: 3
[    17.105] (II) modeset(0): EDID Version: 1.4
[    17.105] (II) modeset(0): Digital Display Input
[    17.105] (II) modeset(0): 10 bits per channel
[    17.105] (II) modeset(0): Digital interface is DisplayPort
[    17.105] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 21
[    17.105] (II) modeset(0): Gamma: 2.20
[    17.105] (II) modeset(0): No DPMS capabilities specified
[    17.105] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    17.105] (II) modeset(0): First detailed timing is preferred mode
[    17.105] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    17.105] (II) modeset(0): redX: 0.667 redY: 0.321   greenX: 0.202 greenY: 0.722
[    17.105] (II) modeset(0): blueX: 0.145 blueY: 0.051   whiteX: 0.312 whiteY: 0.334
[    17.105] (II) modeset(0): Manufacturer's mask: 0
[    17.105] (II) modeset(0): Supported detailed timing:
[    17.105] (II) modeset(0): clock: 592.5 MHz   Image Size:  336 x 210 mm
[    17.105] (II) modeset(0): h_active: 3840  h_sync: 3888  h_sync_end 3920 h_blank_end 4000 h_border: 0
[    17.105] (II) modeset(0): v_active: 2400  v_sync: 2403  v_sync_end 2409 v_blanking: 2469 v_border: 0
[    17.105] (II) modeset(0): Supported detailed timing:
[    17.105] (II) modeset(0): clock: 474.0 MHz   Image Size:  336 x 210 mm
[    17.105] (II) modeset(0): h_active: 3840  h_sync: 3888  h_sync_end 3920 h_blank_end 4000 h_border: 0
[    17.105] (II) modeset(0): v_active: 2400  v_sync: 2403  v_sync_end 2409 v_blanking: 2469 v_border: 0
[    17.105] (II) modeset(0):  90T02LQ156R1
[    17.105] (II) modeset(0): Unknown vendor-specific block 0
[    17.105] (II) modeset(0): Number of EDID sections to follow: 1
[    17.105] (II) modeset(0): EDID (in hex):
[    17.105] (II) modeset(0):   00ffffffffffff004d10d01400000000
[    17.105] (II) modeset(0):   031e0104b52215780adf0eaa5233b825
[    17.105] (II) modeset(0):   0d4f5500000001010101010101010101
[    17.105] (II) modeset(0):   01010101010172e700a0f06045903020
[    17.105] (II) modeset(0):   360050d21000001828b900a0f0604590
[    17.105] (II) modeset(0):   3020360050d210000018000000fe0039
[    17.105] (II) modeset(0):   30543032804c51313536523100000000
[    17.105] (II) modeset(0):   0002410332011200000b010a202001d8
[    17.105] (II) modeset(0):   02030f00e3058000e606050160602800
[    17.105] (II) modeset(0):   00000000000000000000000000000000
[    17.105] (II) modeset(0):   00000000000000000000000000000000
[    17.105] (II) modeset(0):   00000000000000000000000000000000
[    17.105] (II) modeset(0):   00000000000000000000000000000000
[    17.105] (II) modeset(0):   00000000000000000000000000000000
[    17.105] (II) modeset(0):   00000000000000000000000000000000
[    17.105] (II) modeset(0):   000000000000000000000000000000aa
[    17.106] (II) modeset(0): Printing probed modes for output eDP-1
[    17.106] (II) modeset(0): Modeline "3840x2400"x60.0  592.50  3840 3888 3920 4000  2400 2403 2409 2469 -hsync -vsync (148.1 kHz eP)
[    17.106] (II) modeset(0): Modeline "3840x2400"x48.0  474.00  3840 3888 3920 4000  2400 2403 2409 2469 -hsync -vsync (118.5 kHz e)
[    17.106] (II) modeset(0): Modeline "3840x2160"x120.0  1446.25  3840 4188 4616 5392  2160 2161 2164 2235 doublescan -hsync +vsync (268.2 kHz d)
[    17.106] (II) modeset(0): Modeline "3840x2160"x120.0  1044.88  3840 3864 3880 3920  2160 2161 2164 2221 doublescan +hsync -vsync (266.5 kHz d)
[    17.106] (II) modeset(0): Modeline "3840x2160"x60.0  712.75  3840 4160 4576 5312  2160 2163 2168 2237 -hsync +vsync (134.2 kHz d)
[    17.106] (II) modeset(0): Modeline "3840x2160"x60.0  533.00  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.2 kHz d)
[    17.106] (II) modeset(0): Modeline "3200x1800"x60.0  492.00  3200 3456 3800 4400  1800 1803 1808 1865 -hsync +vsync (111.8 kHz d)
[    17.106] (II) modeset(0): Modeline "3200x1800"x59.9  373.00  3200 3248 3280 3360  1800 1803 1808 1852 +hsync -vsync (111.0 kHz d)
[    17.106] (II) modeset(0): Modeline "2880x1620"x60.0  396.25  2880 3096 3408 3936  1620 1623 1628 1679 -hsync +vsync (100.7 kHz d)
[    17.106] (II) modeset(0): Modeline "2880x1620"x60.0  303.75  2880 2928 2960 3040  1620 1623 1628 1666 +hsync -vsync (99.9 kHz d)
[    17.106] (II) modeset(0): Modeline "2560x1600"x60.0  348.50  2560 2760 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz d)
[    17.106] (II) modeset(0): Modeline "2560x1600"x60.0  268.50  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz d)
[    17.106] (II) modeset(0): Modeline "2560x1440"x120.0  638.25  2560 2780 3064 3568  1440 1441 1444 1491 doublescan -hsync +vsync (178.9 kHz d)
[    17.106] (II) modeset(0): Modeline "2560x1440"x120.0  469.12  2560 2584 2600 2640  1440 1441 1444 1481 doublescan +hsync -vsync (177.7 kHz d)
[    17.106] (II) modeset(0): Modeline "2560x1440"x60.0  312.25  2560 2752 3024 3488  1440 1443 1448 1493 -hsync +vsync (89.5 kHz d)
[    17.106] (II) modeset(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz d)
[    17.106] (II) modeset(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[    17.106] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[    17.106] (II) modeset(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[    17.106] (II) modeset(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[    17.106] (II) modeset(0): Modeline "2048x1152"x120.0  406.50  2048 2220 2444 2840  1152 1153 1156 1193 doublescan -hsync +vsync (143.1 kHz d)
[    17.106] (II) modeset(0): Modeline "2048x1152"x120.0  302.50  2048 2072 2088 2128  1152 1153 1156 1185 doublescan +hsync -vsync (142.2 kHz d)
[    17.106] (II) modeset(0): Modeline "2048x1152"x59.9  197.00  2048 2184 2400 2752  1152 1155 1160 1195 -hsync +vsync (71.6 kHz d)
[    17.106] (II) modeset(0): Modeline "2048x1152"x59.9  156.75  2048 2096 2128 2208  1152 1155 1160 1185 +hsync -vsync (71.0 kHz d)
[    17.106] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz d)
[    17.106] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[    17.106] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[    17.106] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[    17.106] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    17.106] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    17.106] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[    17.106] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    17.106] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    17.106] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    17.106] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[    17.106] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    17.106] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    17.106] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    17.106] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    17.106] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    17.106] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    17.106] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    17.106] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[    17.106] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    17.106] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    17.106] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    17.106] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    17.106] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    17.106] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    17.106] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    17.106] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    17.106] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    17.106] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    17.106] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    17.106] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    17.106] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    17.106] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    17.106] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    17.106] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    17.106] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    17.106] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    17.106] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    17.106] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    17.106] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    17.106] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    17.106] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    17.106] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    17.106] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    17.106] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    17.106] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    17.106] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    17.106] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    17.106] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    17.106] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    17.106] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    17.106] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    17.106] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    17.106] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    17.106] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    17.106] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    17.106] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    17.106] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    17.106] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    17.106] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    17.106] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    17.106] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    17.106] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    17.106] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    17.106] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    17.106] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    17.106] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    17.106] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    17.106] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    17.106] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    17.106] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    17.106] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    17.106] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    17.106] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    17.106] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    17.106] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    17.106] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    17.106] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    17.106] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    17.106] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    17.106] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    17.106] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    17.106] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    17.106] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    17.106] (II) modeset(0): EDID for output DP-1
[    17.106] (II) modeset(0): EDID for output DP-2
[    17.106] (II) modeset(0): EDID for output DP-3
[    17.106] (II) modeset(0): Output eDP-1 connected
[    17.106] (II) modeset(0): Output DP-1 disconnected
[    17.106] (II) modeset(0): Output DP-2 disconnected
[    17.106] (II) modeset(0): Output DP-3 disconnected
[    17.106] (II) modeset(0): Using exact sizes for initial modes
[    17.106] (II) modeset(0): Output eDP-1 using initial mode 3840x2400 +0+0
[    17.106] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.106] (==) modeset(0): DPI set to (96, 96)
[    17.106] (II) Loading sub module "fb"
[    17.106] (II) LoadModule: "fb"
[    17.106] (II) Module "fb" already built-in
[    17.106] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[    17.106] (==) NVIDIA(G0): RGB weight 888
[    17.106] (==) NVIDIA(G0): Default visual is TrueColor
[    17.106] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[    17.106] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    17.106] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[    17.106] (**) NVIDIA(G0): Enabling 2D acceleration
[    17.106] (II) Loading sub module "glxserver_nvidia"
[    17.106] (II) LoadModule: "glxserver_nvidia"
[    17.106] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    17.142] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    17.142]    compiled for 1.6.99.901, module version = 1.0.0
[    17.142]    Module class: X.Org Server Extension
[    17.142] (II) NVIDIA GLX Module  530.41.03  Thu Mar 16 19:27:05 UTC 2023
[    17.143] (II) NVIDIA: The X server supports PRIME Render Offload.
[    17.144] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce GTX 1650 Ti (TU117-A) at PCI:1:0:0
[    17.144] (II) NVIDIA(G0):     (GPU-0)
[    17.144] (--) NVIDIA(G0): Memory: 4194304 kBytes
[    17.144] (--) NVIDIA(G0): VideoBIOS: 90.17.42.00.3a
[    17.144] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[    17.144] (II) NVIDIA(G0): Validated MetaModes:
[    17.144] (II) NVIDIA(G0):     "NULL"
[    17.144] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[    17.144] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[    17.144] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[    17.165] (==) modeset(0): Backing store enabled
[    17.165] (==) modeset(0): Silken mouse enabled
[    17.247] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    17.247] (==) modeset(0): DPMS enabled
[    17.247] (II) modeset(0): [DRI2] Setup complete
[    17.247] (II) modeset(0): [DRI2]   DRI driver: iris
[    17.247] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[    17.248] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[    17.248] (II) NVIDIA:     access.
[    17.272] (II) NVIDIA(G0): Setting mode "NULL"
[    17.275] (==) NVIDIA(G0): Disabling shared memory pixmaps
[    17.275] (==) NVIDIA(G0): Backing store enabled
[    17.275] (==) NVIDIA(G0): Silken mouse enabled
[    17.275] (==) NVIDIA(G0): DPMS enabled
[    17.275] (II) Loading sub module "dri2"
[    17.275] (II) LoadModule: "dri2"
[    17.275] (II) Module "dri2" already built-in
[    17.275] (II) NVIDIA(G0): [DRI2] Setup complete
[    17.275] (II) NVIDIA(G0): [DRI2]   VDPAU driver: nvidia
[    17.275] (II) Initializing extension Generic Event Extension
[    17.275] (II) Initializing extension SHAPE
[    17.275] (II) Initializing extension MIT-SHM
[    17.275] (II) Initializing extension XInputExtension
[    17.276] (II) Initializing extension XTEST
[    17.276] (II) Initializing extension BIG-REQUESTS
[    17.276] (II) Initializing extension SYNC
[    17.276] (II) Initializing extension XKEYBOARD
[    17.276] (II) Initializing extension XC-MISC
[    17.276] (II) Initializing extension SECURITY
[    17.276] (II) Initializing extension XFIXES
[    17.276] (II) Initializing extension RENDER
[    17.276] (II) Initializing extension RANDR
[    17.276] (II) Initializing extension COMPOSITE
[    17.276] (II) Initializing extension DAMAGE
[    17.276] (II) Initializing extension MIT-SCREEN-SAVER
[    17.276] (II) Initializing extension DOUBLE-BUFFER
[    17.276] (II) Initializing extension RECORD
[    17.276] (II) Initializing extension DPMS
[    17.276] (II) Initializing extension Present
[    17.277] (II) Initializing extension DRI3
[    17.277] (II) Initializing extension X-Resource
[    17.277] (II) Initializing extension XVideo
[    17.277] (II) Initializing extension XVideo-MotionCompensation
[    17.277] (II) Initializing extension GLX
[    17.277] (II) Initializing extension GLX
[    17.277] (II) Indirect GLX disabled.
[    17.281] (II) AIGLX: Loaded and initialized iris
[    17.281] (II) GLX: Initialized DRI2 GL provider for screen 0
[    17.281] (II) Initializing extension XFree86-VidModeExtension
[    17.281] (II) Initializing extension XFree86-DGA
[    17.281] (II) Initializing extension XFree86-DRI
[    17.281] (II) Initializing extension DRI2
[    17.281] (II) Initializing extension NV-GLX
[    17.281] (II) Initializing extension NV-CONTROL
[    17.281] (II) modeset(0): Damage tracking initialized
[    17.281] (II) modeset(0): Setting screen physical size to 1016 x 635
[    17.314] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    17.314] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    17.314] (II) LoadModule: "libinput"
[    17.314] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    17.317] (II) Module libinput: vendor="X.Org Foundation"
[    17.317]    compiled for 1.21.1.8, module version = 1.3.0
[    17.317]    Module class: X.Org XInput Driver
[    17.317]    ABI class: X.Org XInput driver, version 24.4
[    17.317] (II) Using input driver 'libinput' for 'Video Bus'
[    17.317] (**) Video Bus: always reports core events
[    17.317] (**) Option "Device" "/dev/input/event4"
[    17.320] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    17.320] (II) event4  - Video Bus: device is a keyboard
[    17.320] (II) event4  - Video Bus: device removed
[    17.353] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5/event4"
[    17.353] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[    17.353] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    17.353] (II) event4  - Video Bus: device is a keyboard
[    17.354] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    17.354] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    17.354] (II) Using input driver 'libinput' for 'Video Bus'
[    17.354] (**) Video Bus: always reports core events
[    17.354] (**) Option "Device" "/dev/input/event3"
[    17.354] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    17.354] (II) event3  - Video Bus: device is a keyboard
[    17.354] (II) event3  - Video Bus: device removed
[    17.396] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4/event3"
[    17.396] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    17.397] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    17.397] (II) event3  - Video Bus: device is a keyboard
[    17.397] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    17.397] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    17.397] (II) Using input driver 'libinput' for 'Power Button'
[    17.397] (**) Power Button: always reports core events
[    17.397] (**) Option "Device" "/dev/input/event1"
[    17.397] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    17.397] (II) event1  - Power Button: device is a keyboard
[    17.398] (II) event1  - Power Button: device removed
[    17.423] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    17.423] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    17.423] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    17.423] (II) event1  - Power Button: device is a keyboard
[    17.424] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    17.424] (II) No input driver specified, ignoring this device.
[    17.424] (II) This device may have been added with another device file.
[    17.424] (II) config/udev: Adding input device ELAN29E2:00 04F3:29E2 (/dev/input/event8)
[    17.424] (**) ELAN29E2:00 04F3:29E2: Applying InputClass "libinput touchscreen catchall"
[    17.424] (II) Using input driver 'libinput' for 'ELAN29E2:00 04F3:29E2'
[    17.424] (**) ELAN29E2:00 04F3:29E2: always reports core events
[    17.424] (**) Option "Device" "/dev/input/event8"
[    17.425] (II) event8  - ELAN29E2:00 04F3:29E2: is tagged by udev as: Touchscreen
[    17.425] (II) event8  - ELAN29E2:00 04F3:29E2: device is a touch device
[    17.425] (II) event8  - ELAN29E2:00 04F3:29E2: device removed
[    17.466] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-9/i2c-ELAN29E2:00/0018:04F3:29E2.0001/input/input18/event8"
[    17.466] (II) XINPUT: Adding extended input device "ELAN29E2:00 04F3:29E2" (type: TOUCHSCREEN, id 9)
[    17.466] (**) Option "AccelerationScheme" "none"
[    17.466] (**) ELAN29E2:00 04F3:29E2: (accel) selected scheme none/0
[    17.466] (**) ELAN29E2:00 04F3:29E2: (accel) acceleration factor: 2.000
[    17.466] (**) ELAN29E2:00 04F3:29E2: (accel) acceleration threshold: 4
[    17.467] (II) event8  - ELAN29E2:00 04F3:29E2: is tagged by udev as: Touchscreen
[    17.467] (II) event8  - ELAN29E2:00 04F3:29E2: device is a touch device
[    17.467] (II) config/udev: Adding input device ELAN29E2:00 04F3:29E2 (/dev/input/mouse0)
[    17.467] (II) No input driver specified, ignoring this device.
[    17.467] (II) This device may have been added with another device file.
[    17.468] (II) config/udev: Adding input device ELAN29E2:00 04F3:29E2 UNKNOWN (/dev/input/event9)
[    17.468] (II) No input driver specified, ignoring this device.
[    17.468] (II) This device may have been added with another device file.
[    17.468] (II) config/udev: Adding input device ELAN29E2:00 04F3:29E2 UNKNOWN (/dev/input/event10)
[    17.468] (II) No input driver specified, ignoring this device.
[    17.468] (II) This device may have been added with another device file.
[    17.468] (II) config/udev: Adding input device DELL097D:00 04F3:311C Mouse (/dev/input/event11)
[    17.468] (**) DELL097D:00 04F3:311C Mouse: Applying InputClass "libinput pointer catchall"
[    17.468] (II) Using input driver 'libinput' for 'DELL097D:00 04F3:311C Mouse'
[    17.468] (**) DELL097D:00 04F3:311C Mouse: always reports core events
[    17.468] (**) Option "Device" "/dev/input/event11"
[    17.468] (II) event11 - DELL097D:00 04F3:311C Mouse: is tagged by udev as: Mouse Pointingstick
[    17.469] (II) event11 - DELL097D:00 04F3:311C Mouse: device is a pointer
[    17.469] (II) event11 - DELL097D:00 04F3:311C Mouse: device removed
[    17.520] (II) libinput: DELL097D:00 04F3:311C Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.520] (II) libinput: DELL097D:00 04F3:311C Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.520] (II) libinput: DELL097D:00 04F3:311C Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.520] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-DELL097D:00/0018:04F3:311C.0002/input/input22/event11"
[    17.520] (II) XINPUT: Adding extended input device "DELL097D:00 04F3:311C Mouse" (type: MOUSE, id 10)
[    17.520] (**) Option "AccelerationScheme" "none"
[    17.520] (**) DELL097D:00 04F3:311C Mouse: (accel) selected scheme none/0
[    17.520] (**) DELL097D:00 04F3:311C Mouse: (accel) acceleration factor: 2.000
[    17.520] (**) DELL097D:00 04F3:311C Mouse: (accel) acceleration threshold: 4
[    17.523] (II) event11 - DELL097D:00 04F3:311C Mouse: is tagged by udev as: Mouse Pointingstick
[    17.524] (II) event11 - DELL097D:00 04F3:311C Mouse: device is a pointer
[    17.527] (II) config/udev: Adding input device DELL097D:00 04F3:311C Mouse (/dev/input/mouse1)
[    17.527] (II) No input driver specified, ignoring this device.
[    17.527] (II) This device may have been added with another device file.
[    17.528] (II) config/udev: Adding input device DELL097D:00 04F3:311C Touchpad (/dev/input/event12)
[    17.529] (**) DELL097D:00 04F3:311C Touchpad: Applying InputClass "libinput touchpad catchall"
[    17.529] (**) DELL097D:00 04F3:311C Touchpad: Applying InputClass "touchpad"
[    17.529] (II) Using input driver 'libinput' for 'DELL097D:00 04F3:311C Touchpad'
[    17.529] (**) DELL097D:00 04F3:311C Touchpad: always reports core events
[    17.529] (**) Option "Device" "/dev/input/event12"
[    17.531] (II) event12 - DELL097D:00 04F3:311C Touchpad: is tagged by udev as: Touchpad
[    17.536] (II) event12 - DELL097D:00 04F3:311C Touchpad: device is a touchpad
[    17.537] (II) event12 - DELL097D:00 04F3:311C Touchpad: device removed
[    17.603] (**) Option "Tapping" "on"
[    17.603] (**) Option "TappingButtonMap" "lrm"
[    17.603] (II) libinput: DELL097D:00 04F3:311C Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.603] (II) libinput: DELL097D:00 04F3:311C Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.603] (II) libinput: DELL097D:00 04F3:311C Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.603] (**) Option "NaturalScrolling" "true"
[    17.604] (**) Option "ClickMethod" "clickfinger"
[    17.604] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-DELL097D:00/0018:04F3:311C.0002/input/input23/event12"
[    17.604] (II) XINPUT: Adding extended input device "DELL097D:00 04F3:311C Touchpad" (type: TOUCHPAD, id 11)
[    17.607] (**) Option "AccelerationScheme" "none"
[    17.607] (**) DELL097D:00 04F3:311C Touchpad: (accel) selected scheme none/0
[    17.607] (**) DELL097D:00 04F3:311C Touchpad: (accel) acceleration factor: 2.000
[    17.607] (**) DELL097D:00 04F3:311C Touchpad: (accel) acceleration threshold: 4
[    17.609] (II) event12 - DELL097D:00 04F3:311C Touchpad: is tagged by udev as: Touchpad
[    17.612] (II) event12 - DELL097D:00 04F3:311C Touchpad: device is a touchpad
[    17.614] (II) config/udev: Adding input device DELL097D:00 04F3:311C Touchpad (/dev/input/mouse2)
[    17.614] (**) DELL097D:00 04F3:311C Touchpad: Applying InputClass "touchpad"
[    17.614] (II) Using input driver 'libinput' for 'DELL097D:00 04F3:311C Touchpad'
[    17.614] (**) DELL097D:00 04F3:311C Touchpad: always reports core events
[    17.614] (**) Option "Device" "/dev/input/mouse2"
[    17.676] (II) mouse2  - not using input device '/dev/input/mouse2'.
[    17.676] (EE) libinput: DELL097D:00 04F3:311C Touchpad: Failed to create a device for /dev/input/mouse2
[    17.676] (EE) PreInit returned 2 for "DELL097D:00 04F3:311C Touchpad"
[    17.676] (II) UnloadModule: "libinput"
[    17.677] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event15)
[    17.677] (II) No input driver specified, ignoring this device.
[    17.677] (II) This device may have been added with another device file.
[    17.677] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[    17.677] (II) No input driver specified, ignoring this device.
[    17.677] (II) This device may have been added with another device file.
[    17.677] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[    17.677] (II) No input driver specified, ignoring this device.
[    17.677] (II) This device may have been added with another device file.
[    17.677] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[    17.677] (II) No input driver specified, ignoring this device.
[    17.677] (II) This device may have been added with another device file.
[    17.677] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[    17.677] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[    17.677] (II) Using input driver 'libinput' for 'Intel HID events'
[    17.677] (**) Intel HID events: always reports core events
[    17.677] (**) Option "Device" "/dev/input/event5"
[    17.678] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[    17.678] (II) event5  - Intel HID events: device is a keyboard
[    17.678] (II) event5  - Intel HID events: device removed
[    17.706] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input6/event5"
[    17.706] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 12)
[    17.707] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[    17.707] (II) event5  - Intel HID events: device is a keyboard
[    17.707] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event6)
[    17.707] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[    17.707] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[    17.707] (**) Intel HID 5 button array: always reports core events
[    17.707] (**) Option "Device" "/dev/input/event6"
[    17.708] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard
[    17.708] (II) event6  - Intel HID 5 button array: device is a keyboard
[    17.708] (II) event6  - Intel HID 5 button array: device removed
[    17.733] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input7/event6"
[    17.733] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 13)
[    17.733] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard
[    17.733] (II) event6  - Intel HID 5 button array: device is a keyboard
[    17.734] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event13)
[    17.734] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    17.734] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[    17.734] (**) Dell WMI hotkeys: always reports core events
[    17.734] (**) Option "Device" "/dev/input/event13"
[    17.734] (II) event13 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    17.734] (II) event13 - Dell WMI hotkeys: device is a keyboard
[    17.735] (II) event13 - Dell WMI hotkeys: device removed
[    17.750] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input17/event13"
[    17.750] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[    17.750] (II) event13 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    17.750] (II) event13 - Dell WMI hotkeys: device is a keyboard
[    17.751] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    17.751] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    17.751] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    17.751] (**) AT Translated Set 2 keyboard: always reports core events
[    17.751] (**) Option "Device" "/dev/input/event2"
[    17.751] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    17.751] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[    17.752] (II) event2  - AT Translated Set 2 keyboard: device removed
[    17.766] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    17.766] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[    17.767] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    17.767] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[    17.768] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/event14)
[    17.768] (**) PS/2 Logitech Wheel Mouse: Applying InputClass "libinput pointer catchall"
[    17.768] (II) Using input driver 'libinput' for 'PS/2 Logitech Wheel Mouse'
[    17.768] (**) PS/2 Logitech Wheel Mouse: always reports core events
[    17.768] (**) Option "Device" "/dev/input/event14"
[    17.768] (II) event14 - PS/2 Logitech Wheel Mouse: is tagged by udev as: Mouse
[    17.768] (II) event14 - PS/2 Logitech Wheel Mouse: device is a pointer
[    17.768] (II) event14 - PS/2 Logitech Wheel Mouse: device removed
[    17.810] (II) libinput: PS/2 Logitech Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.810] (II) libinput: PS/2 Logitech Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.810] (II) libinput: PS/2 Logitech Wheel Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.810] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event14"
[    17.810] (II) XINPUT: Adding extended input device "PS/2 Logitech Wheel Mouse" (type: MOUSE, id 16)
[    17.810] (**) Option "AccelerationScheme" "none"
[    17.810] (**) PS/2 Logitech Wheel Mouse: (accel) selected scheme none/0
[    17.810] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[    17.810] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[    17.810] (II) event14 - PS/2 Logitech Wheel Mouse: is tagged by udev as: Mouse
[    17.810] (II) event14 - PS/2 Logitech Wheel Mouse: device is a pointer
[    17.811] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/mouse3)
[    17.811] (II) No input driver specified, ignoring this device.
[    17.811] (II) This device may have been added with another device file.
[    17.811] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    17.811] (II) No input driver specified, ignoring this device.
[    17.811] (II) This device may have been added with another device file.
[    21.513] (II) modeset(0): EDID vendor "SHP", prod id 5328
[    21.513] (II) modeset(0): Printing DDC gathered Modelines:
[    21.513] (II) modeset(0): Modeline "3840x2400"x0.0  592.50  3840 3888 3920 4000  2400 2403 2409 2469 -hsync -vsync (148.1 kHz eP)
[    21.513] (II) modeset(0): Modeline "3840x2400"x0.0  474.00  3840 3888 3920 4000  2400 2403 2409 2469 -hsync -vsync (118.5 kHz e)
[    21.563] (II) modeset(0): EDID vendor "SHP", prod id 5328
[    21.563] (II) modeset(0): Printing DDC gathered Modelines:
[    21.563] (II) modeset(0): Modeline "3840x2400"x0.0  592.50  3840 3888 3920 4000  2400 2403 2409 2469 -hsync -vsync (148.1 kHz eP)
[    21.563] (II) modeset(0): Modeline "3840x2400"x0.0  474.00  3840 3888 3920 4000  2400 2403 2409 2469 -hsync -vsync (118.5 kHz e)
[    21.579] (II) modeset(0): EDID vendor "SHP", prod id 5328
[    21.579] (II) modeset(0): Printing DDC gathered Modelines:
[    21.579] (II) modeset(0): Modeline "3840x2400"x0.0  592.50  3840 3888 3920 4000  2400 2403 2409 2469 -hsync -vsync (148.1 kHz eP)
[    21.579] (II) modeset(0): Modeline "3840x2400"x0.0  474.00  3840 3888 3920 4000  2400 2403 2409 2469 -hsync -vsync (118.5 kHz e)
[    36.367] (EE) event12 - DELL097D:00 04F3:311C Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.23.0/touchpad-jumping-cursors.html for details
[   673.639] (II) config/udev: Adding input device Logitech Wireless Mouse MX Master 3 (/dev/input/mouse4)
[   673.639] (II) No input driver specified, ignoring this device.
[   673.639] (II) This device may have been added with another device file.
[   673.710] (II) config/udev: Adding input device Logitech Wireless Mouse MX Master 3 (/dev/input/event19)
[   673.711] (**) Logitech Wireless Mouse MX Master 3: Applying InputClass "libinput pointer catchall"
[   673.711] (**) Logitech Wireless Mouse MX Master 3: Applying InputClass "libinput keyboard catchall"
[   673.711] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse MX Master 3'
[   673.711] (**) Logitech Wireless Mouse MX Master 3: always reports core events
[   673.711] (**) Option "Device" "/dev/input/event19"
[   673.712] (II) event19 - Logitech Wireless Mouse MX Master 3: is tagged by udev as: Keyboard Mouse
[   673.713] (II) event19 - Logitech Wireless Mouse MX Master 3: device is a pointer
[   673.713] (II) event19 - Logitech Wireless Mouse MX Master 3: device is a keyboard
[   673.714] (II) event19 - Logitech Wireless Mouse MX Master 3: device removed
[   673.756] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   673.756] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   673.756] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   673.756] (II) libinput: Logitech Wireless Mouse MX Master 3: needs a virtual subdevice
[   673.756] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:046D:B023.0004/input/input32/event19"
[   673.756] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse MX Master 3" (type: MOUSE, id 17)
[   673.757] (**) Option "AccelerationScheme" "none"
[   673.757] (**) Logitech Wireless Mouse MX Master 3: (accel) selected scheme none/0
[   673.757] (**) Logitech Wireless Mouse MX Master 3: (accel) acceleration factor: 2.000
[   673.757] (**) Logitech Wireless Mouse MX Master 3: (accel) acceleration threshold: 4
[   673.759] (II) event19 - Logitech Wireless Mouse MX Master 3: is tagged by udev as: Keyboard Mouse
[   673.759] (II) event19 - Logitech Wireless Mouse MX Master 3: device is a pointer
[   673.759] (II) event19 - Logitech Wireless Mouse MX Master 3: device is a keyboard
[   673.760] (**) Logitech Wireless Mouse MX Master 3: Applying InputClass "libinput pointer catchall"
[   673.760] (**) Logitech Wireless Mouse MX Master 3: Applying InputClass "libinput keyboard catchall"
[   673.760] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse MX Master 3'
[   673.760] (**) Logitech Wireless Mouse MX Master 3: always reports core events
[   673.760] (**) Option "Device" "/dev/input/event19"
[   673.761] (II) libinput: Logitech Wireless Mouse MX Master 3: is a virtual subdevice
[   673.761] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   673.761] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   673.761] (II) libinput: Logitech Wireless Mouse MX Master 3: Step value 0 was provided, libinput Fallback acceleration function is used.
[   673.761] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:046D:B023.0004/input/input32/event19"
[   673.761] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse MX Master 3" (type: KEYBOARD, id 18)

I'm using dinit, so I unfortunately, I don't have a journal like that, or I'm missing something.

I did a check on the state, and it always says D0, which corresponds to the higher power usage.

I have the proprietary driver installed, and with my hardware, I thought that the power management should work out of the box, but maybe I got confused by the wiki a little bit...

Offline

#4 2023-06-13 08:45:34

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,650

Re: [SOLVED] Turing GPU not in D3 power state

Check the second link, ampere defaults to rtd3, for turing you'll have to enable it.
Also pay attention to the CPU/IGP requirements, but you've a comet lake, so that should not be a problem.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#5 2023-06-13 10:45:07

omniscient_potato
Member
Registered: 2020-07-12
Posts: 63

Re: [SOLVED] Turing GPU not in D3 power state

Ah, I got it!
I used envycontrol for setting up the udev and modprobe rules, however it's hard to verify whether they are actually working.
When querying 

/proc/driver/nvidia/gpus/0000:01:00.0/power

I get: 

 Runtime D3 status:          Disabled by default

.

Does that mean, that my GPU does not even support runtime D3 power management?

Offline

#6 2023-06-13 15:14:42

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,650

Re: [SOLVED] Turing GPU not in D3 power state

I used envycontrol for setting up the udev and modprobe rule

And are they in place?
If you added the nvidia modules to the initramfs you'll also have to rebuild that to include the modprobe config, otherwise the module parameter won't apply.

cat /sys/bus/pci/devices/0000:01:00.0/power/control

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#7 2023-06-13 15:27:50

omniscient_potato
Member
Registered: 2020-07-12
Posts: 63

Re: [SOLVED] Turing GPU not in D3 power state

They are indeed in place.
Do I need to modprobe the nvidia modules / add them to mkinitcpio config?

cat /sys/bus/pci/devices/0000:01:00.0/power/control

gives:

auto

Last edited by omniscient_potato (2023-06-13 15:32:29)

Offline

#8 2023-06-13 15:36:00

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,650

Re: [SOLVED] Turing GPU not in D3 power state

Do I need to modprobe the nvidia modules / add them to mkinitcpio config?

You need to load the module w/ "NVreg_DynamicPowerManagement=0x02", you can do this at the kernel commandline ("nvidia.NVreg_DynamicPowerManagement=0x02") or w/ a modprobe configlet.
If you do the latter, the configlet must be ready when the module is loaded, so if the module is loaded w/ the initramfs, the configlet must be in the initramfs and that means you've to rebuild the initramfs

sudo lsinitcpio /boot/initramfs-linux.img | grep nvidia

The power control value is correct, so the udev rule fires.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#9 2023-06-13 17:49:06

omniscient_potato
Member
Registered: 2020-07-12
Posts: 63

Re: [SOLVED] Turing GPU not in D3 power state

Alright, so I "gave up" and reinstalled the whole system. Following the instruction one by one, installing nvidia-dkms, envycontrol and rebuilding the initramfs, it seems to be working now.

 cat /proc/driver/nvidia/gpus/0000:01:00.0/power

returning

Runtime D3 status:          Enabled (fine-grained)

However, something else happened.
Envycrontrol also put 

 options nvidia NVreg_PreserveVideoMemoryAllocations=1

into the modprobe configlet, which resulted in the system not being able to sleep.
This is what shows up in dmesg:

[ 6848.245450] NVRM: GPU 0000:01:00.0: PreserveVideoMemoryAllocations module parameter is set. System Power Management attempted without driver procfs suspend interface. Please refer to the 'Configuring Power Management Support' section in the driver README.
[ 6848.245461] nvidia 0000:01:00.0: PM: pci_pm_suspend(): nv_pmops_suspend+0x0/0x30 [nvidia] returns -5
[ 6848.246324] nvidia 0000:01:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x170 returns -5
[ 6848.246339] nvidia 0000:01:00.0: PM: failed to suspend async: error -5
[ 6848.523546] PM: Some devices failed to suspend, or early wake event detected

I'm going to delete that and try if it solves the problem. I'm not sure whether I need this line. Do you know why it is auto generated?

[Edit]
So after deleting the options line, sleep now works again

[Edit]
Found the relevant documentation here: here .
Seems to be a problem with not having systemd indeed.
I'll see what else I can find out.

Last edited by omniscient_potato (2023-06-13 18:13:18)

Offline

#10 2023-06-13 19:42:53

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,650

Re: [SOLVED] Turing GPU not in D3 power state

" options nvidia NVreg_PreserveVideoMemoryAllocations=1" isn't relevant for the RTD3 situation and no, what won't work w/o systemd and

Do you know why it is auto generated?

because you're using envcontrol instead of the arch wiki tongue

Like w/ your other thread: https://bbs.archlinux.org/misc.php?action=rules

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#11 2023-06-14 07:29:45

omniscient_potato
Member
Registered: 2020-07-12
Posts: 63

Re: [SOLVED] Turing GPU not in D3 power state

Thanks seth, greatly appreciate it!
I just very recently switched, and I'm still in the habit of coming here, sorry about that!

Offline

Pages: 1

Board footer

Powered by FluxBB