pci Unable to change power state from D3cold to D0

ybon · 2023-07-05 07:14:08

Hi,

Since yesterday kernel update, my computer takes a very long time to boot, and some feature seems to be randomly missing from one boot to the other (like keyboard shortcut or gestures…).

Computer is Dell Precision 5510

In the logs I see this line that seems related:

pci 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible

But I can't find a solution.

Here is the full dmesg:

[    0.000000] microcode: updated early: 0xdc -> 0xf0, date = 2021-11-12
[    0.000000] Linux version 6.4.1-arch2-1 (linux@archlinux) (gcc (GCC) 13.1.1 20230429, GNU ld (GNU Binutils) 2.40.0) #1 SMP PREEMPT_DYNAMIC Tue, 04 Jul 2023 08:39:40 +0000
[    0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002e08efff] usable
[    0.000000] BIOS-e820: [mem 0x000000002e08f000-0x000000002e08ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000002e090000-0x000000002e0b9fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000002e0ba000-0x00000000397eafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000397eb000-0x0000000039b74fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000039b75000-0x0000000039bb2fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000039bb3000-0x0000000039e44fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000039e45000-0x000000003a4fefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003a4ff000-0x000000003a4fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003a500000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004bdffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x2c4a4018-0x2c4bd657] usable ==> usable
[    0.000000] e820: update [mem 0x2c4a4018-0x2c4bd657] usable ==> usable
[    0.000000] e820: update [mem 0x2c493018-0x2c4a3057] usable ==> usable
[    0.000000] e820: update [mem 0x2c493018-0x2c4a3057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000002c493017] usable
[    0.000000] reserve setup_data: [mem 0x000000002c493018-0x000000002c4a3057] usable
[    0.000000] reserve setup_data: [mem 0x000000002c4a3058-0x000000002c4a4017] usable
[    0.000000] reserve setup_data: [mem 0x000000002c4a4018-0x000000002c4bd657] usable
[    0.000000] reserve setup_data: [mem 0x000000002c4bd658-0x000000002e08efff] usable
[    0.000000] reserve setup_data: [mem 0x000000002e08f000-0x000000002e08ffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000002e090000-0x000000002e0b9fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000002e0ba000-0x00000000397eafff] usable
[    0.000000] reserve setup_data: [mem 0x00000000397eb000-0x0000000039b74fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000039b75000-0x0000000039bb2fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x0000000039bb3000-0x0000000039e44fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000039e45000-0x000000003a4fefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000003a4ff000-0x000000003a4fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000003a500000-0x000000003fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004bdffffff] usable
[    0.000000] efi: EFI v2.4 by American Megatrends
[    0.000000] efi: ACPI=0x39b81000 ACPI 2.0=0x39b81000 SMBIOS=0xf0000 MEMATTR=0x375a2018 INITRD=0x2e129918 
[    0.000000] efi: Remove mem31: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[    0.000000] efi: Not removing mem32: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem33: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem34: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem35: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Dell Inc. Precision 5510/0W7V82, BIOS 1.15.0 07/23/2020
[    0.000000] tsc: Detected 2300.000 MHz processor
[    0.000000] tsc: Detected 2299.968 MHz TSC
[    0.000996] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001012] last_pfn = 0x4be000 max_arch_pfn = 0x400000000
[    0.001017] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001387] last_pfn = 0x3a500 max_arch_pfn = 0x400000000
[    0.010965] Using GB pages for direct mapping
[    0.011544] Secure boot disabled
[    0.011544] RAMDISK: [mem 0x2a6c1000-0x2bdc3fff]
[    0.011549] ACPI: Early table checksum verification disabled
[    0.011552] ACPI: RSDP 0x0000000039B81000 000024 (v02 DELL  )
[    0.011563] ACPI: XSDT 0x0000000039B810B8 0000EC (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.011570] ACPI: FACP 0x0000000039BA1F68 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
[    0.011576] ACPI: DSDT 0x0000000039B81230 020D35 (v02 DELL   CBX3     01072009 INTL 20120913)
[    0.011580] ACPI: FACS 0x0000000039E3ED80 000040
[    0.011583] ACPI: APIC 0x0000000039BA2078 000084 (v03 DELL   CBX3     01072009 AMI  00010013)
[    0.011586] ACPI: FPDT 0x0000000039BA2100 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.011589] ACPI: MCFG 0x0000000039BA2148 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.011593] ACPI: HPET 0x0000000039BA2188 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
[    0.011596] ACPI: SSDT 0x0000000039BA21C0 000495 (v01 IdeRef IdeTable 00001000 INTL 20120913)
[    0.011600] ACPI: LPIT 0x0000000039BA2658 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.011603] ACPI: SSDT 0x0000000039BA26F0 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
[    0.011607] ACPI: SSDT 0x0000000039BA2938 002BAE (v02 INTEL  PtidDevc 00001000 INTL 20120913)
[    0.011610] ACPI: SSDT 0x0000000039BA54E8 000024 (v02 INTEL  OEM_RTD3 00001000 INTL 20120913)
[    0.011613] ACPI: SSDT 0x0000000039BA5510 000BE3 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
[    0.011617] ACPI: SSDT 0x0000000039BA60F8 0004DC (v02 INTEL  zpodd    00001000 INTL 20120913)
[    0.011620] ACPI: DBGP 0x0000000039BA65D8 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.011623] ACPI: DBG2 0x0000000039BA6610 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.011627] ACPI: SSDT 0x0000000039BA6668 000775 (v02 INTEL  xh_rvp10 00000000 INTL 20120913)
[    0.011630] ACPI: BOOT 0x0000000039BA6DE0 000028 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.011633] ACPI: SSDT 0x0000000039BA6E08 0037D6 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.011637] ACPI: UEFI 0x0000000039BAA5E0 000042 (v01                 00000000      00000000)
[    0.011640] ACPI: SSDT 0x0000000039BAA628 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.011644] ACPI: SSDT 0x0000000039BAB4A0 0044FA (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[    0.011647] ACPI: BGRT 0x0000000039BAF9A0 000038 (v00 ?lr;            01072009 AMI  00010013)
[    0.011650] ACPI: SSDT 0x0000000039BAF9D8 0000C3 (v02 SgRef  SgPeg    00001000 INTL 20120913)
[    0.011654] ACPI: DMAR 0x0000000039BAFAA0 0000F0 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.011657] ACPI: SSDT 0x0000000039BAFB90 001868 (v01 OptRef OptTabl  00001000 INTL 20120913)
[    0.011661] ACPI: ASF! 0x0000000039BB13F8 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.011664] ACPI: Reserving FACP table memory at [mem 0x39ba1f68-0x39ba2073]
[    0.011666] ACPI: Reserving DSDT table memory at [mem 0x39b81230-0x39ba1f64]
[    0.011667] ACPI: Reserving FACS table memory at [mem 0x39e3ed80-0x39e3edbf]
[    0.011668] ACPI: Reserving APIC table memory at [mem 0x39ba2078-0x39ba20fb]
[    0.011669] ACPI: Reserving FPDT table memory at [mem 0x39ba2100-0x39ba2143]
[    0.011670] ACPI: Reserving MCFG table memory at [mem 0x39ba2148-0x39ba2183]
[    0.011670] ACPI: Reserving HPET table memory at [mem 0x39ba2188-0x39ba21bf]
[    0.011671] ACPI: Reserving SSDT table memory at [mem 0x39ba21c0-0x39ba2654]
[    0.011672] ACPI: Reserving LPIT table memory at [mem 0x39ba2658-0x39ba26eb]
[    0.011673] ACPI: Reserving SSDT table memory at [mem 0x39ba26f0-0x39ba2937]
[    0.011674] ACPI: Reserving SSDT table memory at [mem 0x39ba2938-0x39ba54e5]
[    0.011675] ACPI: Reserving SSDT table memory at [mem 0x39ba54e8-0x39ba550b]
[    0.011676] ACPI: Reserving SSDT table memory at [mem 0x39ba5510-0x39ba60f2]
[    0.011677] ACPI: Reserving SSDT table memory at [mem 0x39ba60f8-0x39ba65d3]
[    0.011678] ACPI: Reserving DBGP table memory at [mem 0x39ba65d8-0x39ba660b]
[    0.011679] ACPI: Reserving DBG2 table memory at [mem 0x39ba6610-0x39ba6663]
[    0.011680] ACPI: Reserving SSDT table memory at [mem 0x39ba6668-0x39ba6ddc]
[    0.011680] ACPI: Reserving BOOT table memory at [mem 0x39ba6de0-0x39ba6e07]
[    0.011681] ACPI: Reserving SSDT table memory at [mem 0x39ba6e08-0x39baa5dd]
[    0.011682] ACPI: Reserving UEFI table memory at [mem 0x39baa5e0-0x39baa621]
[    0.011683] ACPI: Reserving SSDT table memory at [mem 0x39baa628-0x39bab49a]
[    0.011684] ACPI: Reserving SSDT table memory at [mem 0x39bab4a0-0x39baf999]
[    0.011685] ACPI: Reserving BGRT table memory at [mem 0x39baf9a0-0x39baf9d7]
[    0.011686] ACPI: Reserving SSDT table memory at [mem 0x39baf9d8-0x39bafa9a]
[    0.011687] ACPI: Reserving DMAR table memory at [mem 0x39bafaa0-0x39bafb8f]
[    0.011688] ACPI: Reserving SSDT table memory at [mem 0x39bafb90-0x39bb13f7]
[    0.011689] ACPI: Reserving ASF! table memory at [mem 0x39bb13f8-0x39bb149c]
[    0.011804] No NUMA configuration found
[    0.011807] Faking a node at [mem 0x0000000000000000-0x00000004bdffffff]
[    0.011817] NODE_DATA(0) allocated [mem 0x4bdffb000-0x4bdffffff]
[    0.011848] Zone ranges:
[    0.011848]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.011851]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.011852]   Normal   [mem 0x0000000100000000-0x00000004bdffffff]
[    0.011854]   Device   empty
[    0.011855] Movable zone start for each node
[    0.011856] Early memory node ranges
[    0.011857]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.011859]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.011860]   node   0: [mem 0x0000000000100000-0x000000002e08efff]
[    0.011861]   node   0: [mem 0x000000002e0ba000-0x00000000397eafff]
[    0.011862]   node   0: [mem 0x000000003a4ff000-0x000000003a4fffff]
[    0.011863]   node   0: [mem 0x0000000100000000-0x00000004bdffffff]
[    0.011866] Initmem setup node 0 [mem 0x0000000000001000-0x00000004bdffffff]
[    0.011870] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.011872] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.011894] On node 0, zone DMA: 98 pages in unavailable ranges
[    0.013906] On node 0, zone DMA32: 43 pages in unavailable ranges
[    0.013941] On node 0, zone DMA32: 3348 pages in unavailable ranges
[    0.052965] On node 0, zone Normal: 23296 pages in unavailable ranges
[    0.053056] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.053080] Reserving Intel graphics memory at [mem 0x3c000000-0x3fffffff]
[    0.053660] ACPI: PM-Timer IO Port: 0x1808
[    0.053667] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.053669] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.053670] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.053671] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.053697] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.053700] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.053702] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.053706] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.053708] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.053714] e820: update [mem 0x37139000-0x37348fff] usable ==> reserved
[    0.053730] TSC deadline timer available
[    0.053731] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.053757] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.053760] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.053762] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.053764] PM: hibernation: Registered nosave memory: [mem 0x2c493000-0x2c493fff]
[    0.053766] PM: hibernation: Registered nosave memory: [mem 0x2c4a3000-0x2c4a3fff]
[    0.053767] PM: hibernation: Registered nosave memory: [mem 0x2c4a4000-0x2c4a4fff]
[    0.053768] PM: hibernation: Registered nosave memory: [mem 0x2c4bd000-0x2c4bdfff]
[    0.053770] PM: hibernation: Registered nosave memory: [mem 0x2e08f000-0x2e08ffff]
[    0.053771] PM: hibernation: Registered nosave memory: [mem 0x2e090000-0x2e0b9fff]
[    0.053773] PM: hibernation: Registered nosave memory: [mem 0x37139000-0x37348fff]
[    0.053775] PM: hibernation: Registered nosave memory: [mem 0x397eb000-0x39b74fff]
[    0.053776] PM: hibernation: Registered nosave memory: [mem 0x39b75000-0x39bb2fff]
[    0.053777] PM: hibernation: Registered nosave memory: [mem 0x39bb3000-0x39e44fff]
[    0.053778] PM: hibernation: Registered nosave memory: [mem 0x39e45000-0x3a4fefff]
[    0.053779] PM: hibernation: Registered nosave memory: [mem 0x3a500000-0x3fffffff]
[    0.053780] PM: hibernation: Registered nosave memory: [mem 0x40000000-0xfdffffff]
[    0.053781] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.053782] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.053783] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.053783] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.053784] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.053785] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.053787] [mem 0x40000000-0xfdffffff] available for PCI devices
[    0.053788] Booting paravirtualized kernel on bare hardware
[    0.053790] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.060875] setup_percpu: NR_CPUS:320 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.061321] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u524288
[    0.061329] pcpu-alloc: s225280 r8192 d28672 u524288 alloc=1*2097152
[    0.061331] pcpu-alloc: [0] 0 1 2 3 
[    0.061352] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw
[    0.061460] random: crng init done
[    0.064006] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.065285] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.065359] Fallback order for Node 0: 0 
[    0.065362] Built 1 zonelists, mobility grouping on.  Total pages: 4094177
[    0.065363] Policy zone: Normal
[    0.065681] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.065688] software IO TLB: area num 4.
[    0.141036] Memory: 16173376K/16637300K available (16384K kernel code, 2119K rwdata, 12752K rodata, 3332K init, 4008K bss, 463664K reserved, 0K cma-reserved)
[    0.141170] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.141182] Kernel/User page tables isolation: enabled
[    0.141215] ftrace: allocating 47522 entries in 186 pages
[    0.151400] ftrace: allocated 186 pages with 5 groups
[    0.151486] Dynamic Preempt: full
[    0.151514] rcu: Preemptible hierarchical RCU implementation.
[    0.151515] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.151516] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.151518] 	Trampoline variant of Tasks RCU enabled.
[    0.151518] 	Rude variant of Tasks RCU enabled.
[    0.151519] 	Tracing variant of Tasks RCU enabled.
[    0.151519] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.151520] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.155015] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[    0.155231] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.155471] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.155504] Console: colour dummy device 80x25
[    0.155507] printk: console [tty0] enabled
[    0.155555] ACPI: Core revision 20230331
[    0.155833] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.155909] APIC: Switch to symmetric I/O mode setup
[    0.155911] DMAR: Host address width 39
[    0.155912] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.155918] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.155921] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.155925] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.155927] DMAR: RMRR base: 0x00000039908000 end: 0x00000039927fff
[    0.155929] DMAR: RMRR base: 0x0000003b800000 end: 0x0000003fffffff
[    0.155931] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.155932] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.155934] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.155936] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.155937] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.155938] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.157815] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.157817] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.161787] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.175914] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212717146a7, max_idle_ns: 440795291431 ns
[    0.175934] Calibrating delay loop (skipped), value calculated using timer frequency.. 4601.60 BogoMIPS (lpj=7666560)
[    0.175937] pid_max: default: 32768 minimum: 301
[    0.177977] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[    0.177993] landlock: Up and running.
[    0.177995] Yama: becoming mindful.
[    0.178000] LSM support for eBPF active
[    0.178068] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.178106] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.178361] x86/cpu: SGX disabled by BIOS.
[    0.178371] CPU0: Thermal monitoring enabled (TM1)
[    0.178426] process: using mwait in idle threads
[    0.178432] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.178434] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.178440] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.178442] Spectre V2 : Mitigation: IBRS
[    0.178443] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.178445] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.178446] RETBleed: Mitigation: IBRS
[    0.178447] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.178449] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.178460] MDS: Mitigation: Clear CPU buffers
[    0.178462] TAA: Mitigation: TSX disabled
[    0.178463] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.178470] SRBDS: Mitigation: Microcode
[    0.212171] Freeing SMP alternatives memory: 40K
[    0.212663] smpboot: CPU0: Intel(R) Core(TM) i5-6300HQ CPU @ 2.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.212856] cblist_init_generic: Setting adjustable number of callback queues.
[    0.212858] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.212879] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.212894] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.212908] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.212936] ... version:                4
[    0.212938] ... bit width:              48
[    0.212938] ... generic registers:      8
[    0.212939] ... value mask:             0000ffffffffffff
[    0.212941] ... max period:             00007fffffffffff
[    0.212942] ... fixed-purpose events:   3
[    0.212943] ... event mask:             00000007000000ff
[    0.213118] Estimated ratio of average max frequency by base frequency (times 1024): 1246
[    0.213149] rcu: Hierarchical SRCU implementation.
[    0.213150] rcu: 	Max phase no-delay instances is 1000.
[    0.213837] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.213907] smp: Bringing up secondary CPUs ...
[    0.214029] x86: Booting SMP configuration:
[    0.214030] .... node  #0, CPUs:      #1 #2 #3
[    0.223509] smp: Brought up 1 node, 4 CPUs
[    0.223509] smpboot: Max logical packages: 1
[    0.223509] smpboot: Total of 4 processors activated (18407.40 BogoMIPS)
[    0.223922] devtmpfs: initialized
[    0.223922] x86/mm: Memory block size: 128MB
[    0.227176] ACPI: PM: Registering ACPI NVS region [mem 0x2e08f000-0x2e08ffff] (4096 bytes)
[    0.227179] ACPI: PM: Registering ACPI NVS region [mem 0x39bb3000-0x39e44fff] (2695168 bytes)
[    0.227285] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.227294] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.227351] pinctrl core: initialized pinctrl subsystem
[    0.227567] PM: RTC time: 06:46:49, date: 2023-07-05
[    0.228160] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.228434] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.228611] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.228771] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.228795] audit: initializing netlink subsys (disabled)
[    0.228858] audit: type=2000 audit(1688539609.069:1): state=initialized audit_enabled=0 res=1
[    0.228858] thermal_sys: Registered thermal governor 'fair_share'
[    0.228858] thermal_sys: Registered thermal governor 'bang_bang'
[    0.228858] thermal_sys: Registered thermal governor 'step_wise'
[    0.228858] thermal_sys: Registered thermal governor 'user_space'
[    0.228858] thermal_sys: Registered thermal governor 'power_allocator'
[    0.228858] cpuidle: using governor ladder
[    0.228858] cpuidle: using governor menu
[    0.228858] Simple Boot Flag at 0x47 set to 0x80
[    0.228858] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.228858] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.228858] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.228858] PCI: not using MMCONFIG
[    0.228858] PCI: Using configuration type 1 for base access
[    0.229461] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.229469] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.242592] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.242592] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.242592] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.242592] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.242718] fbcon: Taking over console
[    0.242737] ACPI: Added _OSI(Module Device)
[    0.242738] ACPI: Added _OSI(Processor Device)
[    0.242740] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.242741] ACPI: Added _OSI(Processor Aggregator Device)
[    0.283763] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT1], AE_NOT_FOUND (20230331/dswload2-162)
[    0.283777] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230331/psobject-220)
[    0.283785] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[    0.299828] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.303736] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.316858] ACPI: Dynamic OEM Table Load:
[    0.316866] ACPI: SSDT 0xFFFF978B41690800 000579 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.319306] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.321294] ACPI: Dynamic OEM Table Load:
[    0.321302] ACPI: SSDT 0xFFFF978B41634C00 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.324017] ACPI: Dynamic OEM Table Load:
[    0.324024] ACPI: SSDT 0xFFFF978B41693000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.326453] ACPI: Dynamic OEM Table Load:
[    0.326459] ACPI: SSDT 0xFFFF978B411F9000 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.330787] ACPI: EC: EC started
[    0.330789] ACPI: EC: interrupt blocked
[    0.334100] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.334104] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[    0.334106] ACPI: Interpreter enabled
[    0.334156] ACPI: PM: (supports S0 S3 S4 S5)
[    0.334157] ACPI: Using IOAPIC for interrupt routing
[    0.336445] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.337796] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[    0.337815] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.337816] PCI: Using E820 reservations for host bridge windows
[    0.338756] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.341818] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
[    0.386695] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
[    0.387313] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
[    0.390005] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[    0.390480] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[    0.390956] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[    0.391428] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[    0.391896] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[    0.392366] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[    0.392840] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[    0.393319] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[    0.393786] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[    0.394254] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[    0.394730] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[    0.395197] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[    0.395665] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[    0.396141] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[    0.396610] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[    0.397077] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[    0.397546] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[    0.398023] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[    0.398504] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[    0.399477] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[    0.425192] ACPI: \_TZ_.FN00: New power resource
[    0.425315] ACPI: \_TZ_.FN01: New power resource
[    0.425436] ACPI: \_TZ_.FN02: New power resource
[    0.425554] ACPI: \_TZ_.FN03: New power resource
[    0.425676] ACPI: \_TZ_.FN04: New power resource
[    0.427248] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.427258] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.427324] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.427327] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.427331] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[    0.428583] PCI host bridge to bus 0000:00
[    0.428586] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.428589] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.428592] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.428594] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000effff window]
[    0.428596] pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff window]
[    0.428598] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.428600] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.428624] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[    0.428747] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.428830] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.429529] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[    0.429552] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[    0.429569] pci 0000:00:02.0: reg 0x18: [mem 0x70000000-0x7fffffff 64bit pref]
[    0.429581] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.429615] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.429621] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.429858] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.429878] pci 0000:00:04.0: reg 0x10: [mem 0xddd20000-0xddd27fff 64bit]
[    0.430297] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.430328] pci 0000:00:14.0: reg 0x10: [mem 0xddd10000-0xddd1ffff 64bit]
[    0.430426] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.430860] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.430890] pci 0000:00:14.2: reg 0x10: [mem 0xddd34000-0xddd34fff 64bit]
[    0.431187] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
[    0.431395] pci 0000:00:15.0: reg 0x10: [mem 0xddd33000-0xddd33fff 64bit]
[    0.432692] pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
[    0.432900] pci 0000:00:15.1: reg 0x10: [mem 0xddd32000-0xddd32fff 64bit]
[    0.434098] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.434141] pci 0000:00:16.0: reg 0x10: [mem 0xddd31000-0xddd31fff 64bit]
[    0.434272] pci 0000:00:16.0: PME# supported from D3hot
[    0.434645] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.434745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.435606] pci 0000:00:1c.1: [8086:a111] type 01 class 0x060400
[    0.435707] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.436609] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.436720] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.437597] pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
[    0.437693] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.438540] pci 0000:00:1d.6: [8086:a11e] type 01 class 0x060400
[    0.438644] pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold
[    0.439511] pci 0000:00:1f.0: [8086:a150] type 00 class 0x060100
[    0.440030] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.440050] pci 0000:00:1f.2: reg 0x10: [mem 0xddd2c000-0xddd2ffff]
[    0.440445] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040380
[    0.440475] pci 0000:00:1f.3: reg 0x10: [mem 0xddd28000-0xddd2bfff 64bit]
[    0.440513] pci 0000:00:1f.3: reg 0x20: [mem 0xddd00000-0xddd0ffff 64bit]
[    0.440565] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.441447] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.441506] pci 0000:00:1f.4: reg 0x10: [mem 0xddd30000-0xddd300ff 64bit]
[    0.441579] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.442029] pci 0000:01:00.0: [10de:13b1] type 00 class 0x030200
[    0.442055] pci 0000:01:00.0: reg 0x10: [mem 0xdc000000-0xdcffffff]
[    0.442077] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.442100] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.442116] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.442131] pci 0000:01:00.0: reg 0x30: [mem 0xdd000000-0xdd07ffff pref]
[    0.442155] pci 0000:01:00.0: Enabling HDA controller
[    0.442226] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.442739] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.442743] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.442746] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdd0fffff]
[    0.442750] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.442864] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[    0.442917] pci 0000:02:00.0: reg 0x10: [mem 0xddc00000-0xddc01fff 64bit]
[    0.443134] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.443828] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.443833] pci 0000:00:1c.0:   bridge window [mem 0xddc00000-0xddcfffff]
[    0.443910] pci 0000:03:00.0: [10ec:525a] type 00 class 0xff0000
[    0.443953] pci 0000:03:00.0: reg 0x14: [mem 0xdd100000-0xdd100fff]
[    0.444107] pci 0000:03:00.0: supports D1 D2
[    0.444108] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.444665] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.444669] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.444672] pci 0000:00:1c.1:   bridge window [mem 0xdd100000-0xddafffff]
[    0.444676] pci 0000:00:1c.1:   bridge window [mem 0xc2100000-0xc2afffff 64bit pref]
[    0.445009] pci 0000:04:00.0: [1179:010f] type 00 class 0x010802
[    0.445039] pci 0000:04:00.0: reg 0x10: [mem 0xddb00000-0xddb03fff 64bit]
[    0.445110] pci 0000:04:00.0: enabling Extended Tags
[    0.446008] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.446013] pci 0000:00:1d.0:   bridge window [mem 0xddb00000-0xddbfffff]
[    0.446075] pci 0000:00:1d.4: PCI bridge to [bus 05]
[    0.446134] pci 0000:00:1d.6: PCI bridge to [bus 06-3e]
[    0.446139] pci 0000:00:1d.6:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.446143] pci 0000:00:1d.6:   bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
[    0.449764] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.449849] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.449931] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.450013] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.450094] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[    0.450176] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[    0.450256] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.450337] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.453324] ACPI: EC: interrupt unblocked
[    0.453326] ACPI: EC: event unblocked
[    0.453335] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.453337] ACPI: EC: GPE=0x14
[    0.453339] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[    0.453341] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[    0.453451] iommu: Default domain type: Translated 
[    0.453451] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.453451] SCSI subsystem initialized
[    0.453451] libata version 3.00 loaded.
[    0.453451] ACPI: bus type USB registered
[    0.453451] usbcore: registered new interface driver usbfs
[    0.453451] usbcore: registered new interface driver hub
[    0.453451] usbcore: registered new device driver usb
[    0.453451] pps_core: LinuxPPS API ver. 1 registered
[    0.453451] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.453451] PTP clock support registered
[    0.453451] EDAC MC: Ver: 3.0.0
[    0.453451] efivars: Registered efivars operations
[    0.453451] NetLabel: Initializing
[    0.453451] NetLabel:  domain hash size = 128
[    0.453451] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.453451] NetLabel:  unlabeled traffic allowed by default
[    0.453451] mctp: management component transport protocol core
[    0.453451] NET: Registered PF_MCTP protocol family
[    0.453451] PCI: Using ACPI for IRQ routing
[    0.478975] PCI: pci_cache_line_size set to 64 bytes
[    0.479323] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.479326] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.479327] e820: reserve RAM buffer [mem 0x2c493018-0x2fffffff]
[    0.479329] e820: reserve RAM buffer [mem 0x2c4a4018-0x2fffffff]
[    0.479331] e820: reserve RAM buffer [mem 0x2e08f000-0x2fffffff]
[    0.479332] e820: reserve RAM buffer [mem 0x37139000-0x37ffffff]
[    0.479334] e820: reserve RAM buffer [mem 0x397eb000-0x3bffffff]
[    0.479335] e820: reserve RAM buffer [mem 0x3a500000-0x3bffffff]
[    0.479337] e820: reserve RAM buffer [mem 0x4be000000-0x4bfffffff]
[    0.479382] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.479382] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.479382] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.479382] vgaarb: loaded
[    0.480923] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.480933] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.482656] clocksource: Switched to clocksource tsc-early
[    0.494737] VFS: Disk quotas dquot_6.6.0
[    0.494754] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.494867] pnp: PnP ACPI init
[    0.495247] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.495251] system 00:00: [io  0xffff] has been reserved
[    0.495254] system 00:00: [io  0xffff] has been reserved
[    0.495256] system 00:00: [io  0xffff] has been reserved
[    0.495258] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.495260] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.495391] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.495479] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.496177] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.496181] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.496183] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.496186] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.496188] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.496190] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.496192] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.496195] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.496197] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.496200] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.496262] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.496265] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.496268] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.496270] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.496272] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.496274] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.496277] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.496729] system 00:08: [io  0xff00-0xfffe] has been reserved
[    0.498577] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.498581] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.498583] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.504283] pnp: PnP ACPI: found 10 devices
[    0.510224] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.510300] NET: Registered PF_INET protocol family
[    0.510495] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.514068] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.514116] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.514187] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.514445] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.514761] TCP: Hash tables configured (established 131072 bind 65536)
[    0.514860] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.514915] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.514978] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.515043] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.515050] NET: Registered PF_XDP protocol family
[    0.515061] pci 0000:00:1d.6: bridge window [io  0x1000-0x0fff] to [bus 06-3e] add_size 1000
[    0.515073] pci 0000:00:1d.6: BAR 13: assigned [io  0x2000-0x2fff]
[    0.515082] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.515090] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.515099] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdd0fffff]
[    0.515105] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.515117] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.515126] pci 0000:00:1c.0:   bridge window [mem 0xddc00000-0xddcfffff]
[    0.515142] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.515144] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.515152] pci 0000:00:1c.1:   bridge window [mem 0xdd100000-0xddafffff]
[    0.515159] pci 0000:00:1c.1:   bridge window [mem 0xc2100000-0xc2afffff 64bit pref]
[    0.515170] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.515178] pci 0000:00:1d.0:   bridge window [mem 0xddb00000-0xddbfffff]
[    0.515194] pci 0000:00:1d.4: PCI bridge to [bus 05]
[    0.515216] pci 0000:00:1d.6: PCI bridge to [bus 06-3e]
[    0.515219] pci 0000:00:1d.6:   bridge window [io  0x2000-0x2fff]
[    0.515227] pci 0000:00:1d.6:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.515233] pci 0000:00:1d.6:   bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
[    0.515245] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.515247] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.515249] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.515251] pci_bus 0000:00: resource 7 [mem 0x000e4000-0x000effff window]
[    0.515253] pci_bus 0000:00: resource 8 [mem 0x40000000-0xdfffffff window]
[    0.515255] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
[    0.515257] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.515258] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
[    0.515260] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.515262] pci_bus 0000:02: resource 1 [mem 0xddc00000-0xddcfffff]
[    0.515264] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.515266] pci_bus 0000:03: resource 1 [mem 0xdd100000-0xddafffff]
[    0.515268] pci_bus 0000:03: resource 2 [mem 0xc2100000-0xc2afffff 64bit pref]
[    0.515270] pci_bus 0000:04: resource 1 [mem 0xddb00000-0xddbfffff]
[    0.515271] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.515273] pci_bus 0000:06: resource 1 [mem 0xc4000000-0xda0fffff]
[    0.515275] pci_bus 0000:06: resource 2 [mem 0x80000000-0xa1ffffff 64bit pref]
[    0.516186] PCI: CLS 0 bytes, default 64
[    0.516206] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:15.0
[    0.516213] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:15.1
[    0.516227] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.516228] software IO TLB: mapped [mem 0x0000000033139000-0x0000000037139000] (64MB)
[    0.516267] Trying to unpack rootfs image as initramfs...
[    0.516990] Initialise system trusted keyrings
[    0.516999] Key type blacklist registered
[    0.517041] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.517057] zbud: loaded
[    0.517248] integrity: Platform Keyring initialized
[    0.517250] integrity: Machine keyring initialized
[    0.526959] Key type asymmetric registered
[    0.526962] Asymmetric key parser 'x509' registered
[    0.526985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.527052] io scheduler mq-deadline registered
[    0.527054] io scheduler kyber registered
[    0.527075] io scheduler bfq registered
[    0.528733] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.530750] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.CHRG], AE_NOT_FOUND (20230331/psargs-330)
[    0.530767] ACPI Error: Aborting method \PNOT due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.530778] ACPI Error: Aborting method \_SB.AC._PSR due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.530790] ACPI: \_SB_.AC__: Error reading AC Adapter state: AE_NOT_FOUND
[    0.530882] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.533990] ACPI: button: Lid Switch [LID0]
[    0.534038] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.537262] ACPI: button: Power Button [PBTN]
[    0.537301] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.537323] ACPI: button: Sleep Button [SBTN]
[    0.537365] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.540651] ACPI: button: Power Button [PWRF]
[    0.543166] thermal LNXTHERM:00: registered as thermal_zone0
[    0.543169] ACPI: thermal: Thermal Zone [THM] (25 C)
[    0.543369] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20230331/psargs-330)
[    0.543383] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.543582] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20230331/psargs-330)
[    0.543593] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.543679] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20230331/psargs-330)
[    0.543689] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.543767] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20230331/psargs-330)
[    0.543783] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.544555] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.548574] Non-volatile memory driver v1.3
[    0.548577] Linux agpgart interface v0.103
[    0.548625] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.548650] ACPI: bus type drm_connector registered
[    0.549661] usbcore: registered new interface driver usbserial_generic
[    0.549668] usbserial: USB Serial support registered for generic
[    0.550179] rtc_cmos 00:02: RTC can wake from S4
[    0.551358] rtc_cmos 00:02: registered as rtc0
[    0.551484] rtc_cmos 00:02: setting system clock to 2023-07-05T06:46:50 UTC (1688539610)
[    0.551511] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[    0.551910] intel_pstate: Intel P-state driver initializing
[    0.552121] intel_pstate: HWP enabled
[    0.552172] ledtrig-cpu: registered to indicate activity on CPUs
[    0.552794] efifb: probing for efifb
[    0.552806] efifb: framebuffer at 0x70000000, using 32400k, total 32400k
[    0.552808] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[    0.552810] efifb: scrolling: redraw
[    0.552810] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.552927] Console: switching to colour frame buffer device 240x67
[    0.563187] fb0: EFI VGA frame buffer device
[    0.563213] hid: raw HID events driver (C) Jiri Kosina
[    0.563669] intel_pmc_core INT33A1:00:  initialized
[    0.563789] drop_monitor: Initializing network drop monitor service
[    0.587031] Initializing XFRM netlink socket
[    0.587063] NET: Registered PF_INET6 protocol family
[    0.588442] ACPI: battery: Slot [BAT0] (battery present)
[    0.617046] Freeing initrd memory: 23564K
[    0.624511] Segment Routing with IPv6
[    0.624513] RPL Segment Routing with IPv6
[    0.624542] In-situ OAM (IOAM) with IPv6
[    0.624576] NET: Registered PF_PACKET protocol family
[    0.625515] microcode: Microcode Update Driver: v2.2.
[    0.625534] IPI shorthand broadcast: enabled
[    0.627169] sched_clock: Marking stable (624945877, 567628)->(629494517, -3981012)
[    0.627430] registered taskstats version 1
[    0.627900] Loading compiled-in X.509 certificates
[    0.630827] Loaded X.509 cert 'Build time autogenerated kernel key: e1f668c86850a5b5416a171c84499cecafe439ba'
[    0.631356] zswap: loaded using pool zstd/zsmalloc
[    0.633383] Key type .fscrypt registered
[    0.633385] Key type fscrypt-provisioning registered
[    0.633649] integrity: Loading X.509 certificate: UEFI:db
[    0.633674] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.633675] integrity: Loading X.509 certificate: UEFI:db
[    0.633697] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.634391] PM:   Magic number: 15:251:771
[    0.639017] RAS: Correctable Errors collector initialized.
[    0.639072] clk: Disabling unused clocks
[    0.640062] Freeing unused decrypted memory: 2036K
[    0.640526] Freeing unused kernel image (initmem) memory: 3332K
[    0.664071] Write protecting the kernel read-only data: 30720k
[    0.665050] Freeing unused kernel image (rodata/data gap) memory: 1584K
[    0.728728] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.728732] rodata_test: all tests were successful
[    0.728733] x86/mm: Checking user space page tables
[    0.775109] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.775118] Run /init as init process
[    0.775120]   with arguments:
[    0.775121]     /init
[    0.775122]   with environment:
[    0.775122]     HOME=/
[    0.775123]     TERM=linux
[    0.968564] wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
[    0.982248] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.982567] i8042: Warning: Keylock active
[    0.987220] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.987297] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.006147] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.006155] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.007233] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[    1.007652] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.007656] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.007659] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.007701] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[    1.007704] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.007706] usb usb1: Product: xHCI Host Controller
[    1.007707] usb usb1: Manufacturer: Linux 6.4.1-arch2-1 xhci-hcd
[    1.007709] usb usb1: SerialNumber: 0000:00:14.0
[    1.007927] hub 1-0:1.0: USB hub found
[    1.007944] hub 1-0:1.0: 16 ports detected
[    1.011266] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[    1.011271] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.011272] usb usb2: Product: xHCI Host Controller
[    1.011274] usb usb2: Manufacturer: Linux 6.4.1-arch2-1 xhci-hcd
[    1.011277] usb usb2: SerialNumber: 0000:00:14.0
[    1.011362] hub 2-0:1.0: USB hub found
[    1.011376] hub 2-0:1.0: 10 ports detected
[    1.012068] usb: port power management may be unreliable
[    1.021765] nvme nvme0: pci function 0000:04:00.0
[    1.027735] nvme nvme0: 4/0/0 default/read/poll queues
[    1.028966]  nvme0n1: p1 p2 p3
[    1.057571] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.260616] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.401892] usb 1-4: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[    1.401909] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.465757] Console: switching to colour dummy device 80x25
[    1.465810] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.468204] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.470679] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    1.508240] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[    1.508254] i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[    1.524094] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[    1.540677] tsc: Refined TSC clocksource calibration: 2303.977 MHz
[    1.540693] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135e23ec03, max_idle_ns: 440795263401 ns
[    1.540730] clocksource: Switched to clocksource tsc
[    1.543130] usb 2-2: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[    1.543143] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.543149] usb 2-2: Product: Ultra
[    1.543154] usb 2-2: Manufacturer: SanDisk
[    1.543158] usb 2-2: SerialNumber: 4C531001571203115544
[    1.543609] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    1.550330] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.552113] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.552356] ACPI: video: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    1.552452] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input7
[    1.564276] usb-storage 2-2:1.0: USB Mass Storage device detected
[    1.564649] scsi host0: usb-storage 2-2:1.0
[    1.564889] usbcore: registered new interface driver usb-storage
[    1.585337] fbcon: i915drmfb (fb0) is primary device
[    1.664023] usb 1-12: new high-speed USB device number 3 using xhci_hcd
[    1.815485] usb 1-12: New USB device found, idVendor=1bcf, idProduct=2b95, bcdDevice=56.05
[    1.815496] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.815501] usb 1-12: Product: Integrated_Webcam_HD
[    1.815505] usb 1-12: Manufacturer: CNFEH73M073010000912
[    2.582459] scsi 0:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[    2.583731] sd 0:0:0:0: [sda] 30464000 512-byte logical blocks: (15.6 GB/14.5 GiB)
[    2.584861] sd 0:0:0:0: [sda] Write Protect is off
[    2.584868] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    2.585312] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.588893]  sda:
[    2.588950] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    2.701646] Console: switching to colour frame buffer device 240x67
[    2.727926] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    3.027996] EXT4-fs (nvme0n1p3): mounted filesystem abdb92fd-375b-4517-919e-e174070c2c02 r/w with ordered data mode. Quota mode: none.
[    3.117421] systemd[1]: systemd 253.5-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    3.117429] systemd[1]: Detected architecture x86-64.
[    3.118199] systemd[1]: Hostname set to <leonardo>.
[    3.266246] systemd[1]: bpf-lsm: LSM BPF program attached
[    3.266646] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'systemd'
[    3.495419] systemd[1]: /etc/systemd/system/rustdesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rustdesk.pid → /run/rustdesk.pid; please update the unit file accordingly.
[    3.497271] systemd[1]: Queued start job for default target Graphical Interface.
[    3.524017] systemd[1]: Created slice Slice /system/getty.
[    3.525453] systemd[1]: Created slice Slice /system/modprobe.
[    3.526691] systemd[1]: Created slice Slice /system/rethinkdb.
[    3.527900] systemd[1]: Created slice Slice /system/systemd-fsck.
[    3.528935] systemd[1]: Created slice User and Session Slice.
[    3.529438] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.529891] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.530739] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.531110] systemd[1]: Reached target Local Encrypted Volumes.
[    3.531373] systemd[1]: Reached target Login Prompts.
[    3.531617] systemd[1]: Reached target Local Integrity Protected Volumes.
[    3.531909] systemd[1]: Reached target Remote File Systems.
[    3.532150] systemd[1]: Reached target Slice Units.
[    3.532427] systemd[1]: Reached target Local Verity Protected Volumes.
[    3.532893] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.533728] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.537111] systemd[1]: Listening on Process Core Dump Socket.
[    3.537920] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.538668] systemd[1]: Listening on Journal Socket.
[    3.539589] systemd[1]: Listening on udev Control Socket.
[    3.540231] systemd[1]: Listening on udev Kernel Socket.
[    3.542533] systemd[1]: Mounting Huge Pages File System...
[    3.544669] systemd[1]: Mounting POSIX Message Queue File System...
[    3.546603] systemd[1]: Mounting Kernel Debug File System...
[    3.548326] systemd[1]: Mounting Kernel Trace File System...
[    3.550272] systemd[1]: Starting Create List of Static Device Nodes...
[    3.551682] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.553181] systemd[1]: Starting Load Kernel Module configfs...
[    3.554631] systemd[1]: Starting Load Kernel Module dm_mod...
[    3.556037] systemd[1]: Starting Load Kernel Module drm...
[    3.557386] systemd[1]: Starting Load Kernel Module fuse...
[    3.558714] systemd[1]: Starting Load Kernel Module loop...
[    3.558944] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    3.560978] systemd[1]: Starting Journal Service...
[    3.562634] systemd[1]: Starting Load Kernel Modules...
[    3.562760] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[    3.563810] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.564965] systemd[1]: Starting Coldplug All udev Devices...
[    3.566854] systemd[1]: Mounted Huge Pages File System.
[    3.567079] systemd[1]: Mounted POSIX Message Queue File System.
[    3.567305] systemd[1]: Mounted Kernel Debug File System.
[    3.567488] systemd[1]: Mounted Kernel Trace File System.
[    3.572791] device-mapper: uevent: version 1.0.3
[    3.572869] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    3.578333] loop: module loaded
[    3.580234] EXT4-fs (nvme0n1p3): re-mounted abdb92fd-375b-4517-919e-e174070c2c02 r/w. Quota mode: none.
[    3.580441] fuse: init (API version 7.38)
[    3.582969] systemd-journald[191]: Collecting audit messages is disabled.
[    3.590844] systemd[1]: Finished Create List of Static Device Nodes.
[    3.591877] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    3.593012] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.597493] systemd[1]: Finished Load Kernel Module configfs.
[    3.597920] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    3.616892] vboxdrv: loading out-of-tree module taints kernel.
[    3.616897] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    3.617560] systemd[1]: Finished Load Kernel Module dm_mod.
[    3.632715] vboxdrv: Found 4 processor cores/threads
[    3.637556] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    3.637763] systemd[1]: Started Journal Service.
[    3.654446] vboxdrv: TSC mode is Invariant, tentative frequency 2303976773 Hz
[    3.654449] vboxdrv: Successfully loaded version 7.0.8 r156879 (interface 0x00330004)
[    3.658390] VBoxNetAdp: Successfully started.
[    3.663942] VBoxNetFlt: Successfully started.
[    3.779560] systemd-journald[191]: Received client request to flush runtime journal.
[    3.780548] systemd-journald[191]: File /var/log/journal/d47472ac809b49c8924bc470b5e92090/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    3.941406] loop0: detected capacity change from 0 to 203488
[    3.944096] loop1: detected capacity change from 0 to 203520
[    3.950835] loop3: detected capacity change from 0 to 113544
[    3.952063] loop2: detected capacity change from 0 to 113504
[    3.955462] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.960121] loop4: detected capacity change from 0 to 280
[    3.960206] loop5: detected capacity change from 0 to 133320
[    3.963161] loop6: detected capacity change from 0 to 66104
[    3.963479] loop7: detected capacity change from 0 to 66120
[    4.125583] Adding 7863292k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:7863292k SSFS
[    4.204030] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20230331/nspredef-260)
[    4.204040] _ART package 0 is invalid, ignored
[    4.204049] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20230331/nsprepkg-94)
[    4.207550] Consider using thermal netlink events interface
[    4.214526] acpi INT33D5:00: intel-hid: created platform device
[    4.214653] input: Intel HID events as /devices/platform/INT33D5:00/input/input8
[    4.294263] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    4.298600] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    4.298628] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    4.298683] pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000
[    4.298742] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]
[    4.310173] i2c i2c-6: 1/2 memory slots populated (from DMI)
[    4.310497] i2c i2c-6: Successfully instantiated SPD at 0x50
[    4.358753] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    4.375685] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    4.445521] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    4.445524] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.445525] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.445526] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.445527] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.445806] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[    4.448143] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.505977] cryptd: max_cpu_qlen set to 1000
[    4.954382] intel_rapl_common: Found RAPL domain package
[    4.954385] intel_rapl_common: Found RAPL domain core
[    4.954386] intel_rapl_common: Found RAPL domain uncore
[    4.954387] intel_rapl_common: Found RAPL domain dram
[    4.954986] AVX2 version of gcm_enc/dec engaged.
[    4.955022] AES CTR mode by8 optimization enabled
[    4.976608] iTCO_vendor_support: vendor-support=0
[    4.976929] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    4.977213] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    5.005115] input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11
[    5.005292] ee1004 6-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    5.056537] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    5.056808] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.072387] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.072655] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.073310] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.073314] cfg80211: failed to load regulatory.db
[    5.223932] psmouse serio1: synaptics: Unable to query device: -5
[    5.433444] input: DLL06E5:01 06CB:7A13 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL06E5:01/0018:06CB:7A13.0001/input/input12
[    5.433546] input: DLL06E5:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL06E5:01/0018:06CB:7A13.0001/input/input13
[    5.433657] hid-generic 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL06E5:01 06CB:7A13] on i2c-DLL06E5:01
[    5.434314] dell_laptop: Using i8042 filter function for receiving events
[    5.456588] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    5.464256] intel_rapl_common: Found RAPL domain package
[    5.464259] intel_rapl_common: Found RAPL domain dram
[    5.483208] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    5.483227] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.486742] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.509483] input: DLL06E5:01 06CB:7A13 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL06E5:01/0018:06CB:7A13.0001/input/input15
[    5.509607] input: DLL06E5:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL06E5:01/0018:06CB:7A13.0001/input/input16
[    5.509781] hid-multitouch 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL06E5:01 06CB:7A13] on i2c-DLL06E5:01
[    5.543835] mousedev: PS/2 mouse device common for all mice
[    5.557770] Intel(R) Wireless WiFi driver for Linux
[    5.557831] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[    5.558878] iwlwifi 0000:02:00.0: Detected crf-id 0xbadcafe, cnv-id 0x3000000 wfpm id 0x80000000
[    5.558893] iwlwifi 0000:02:00.0: PCI dev 24f3/0050, rev=0x201, rfid=0xd55555d5
[    5.606472] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    5.606486] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.606490] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    5.606492] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.606494] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.606495] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x18
[    5.606497] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[    5.606499] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    5.613835] iwlwifi 0000:02:00.0: loaded firmware version 36.ca7b901d.0 8000C-36.ucode op_mode iwlmvm
[    5.726987] intel_tcc_cooling: Programmable TCC Offset detected
[    5.733777] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    5.733819] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    5.733855] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    5.733890] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    5.764047] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x201
[    5.764245] thermal thermal_zone11: failed to read out thermal zone (-61)
[    5.849304] iwlwifi 0000:02:00.0: base HW address: 44:85:00:0d:f3:ef, OTP minor version: 0x0
[    5.923747] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.941929] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    5.957294] usbcore: registered new interface driver uas
[    6.074237] bbswitch: version 0.8
[    6.074255] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    6.074270] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    6.074294] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20230331/nsarguments-61)
[    6.074622] bbswitch: detected an Optimus _DSM function
[    6.074640] pci 0000:01:00.0: enabling device (0006 -> 0007)
[    6.074857] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[    6.130644] mc: Linux media interface: v0.10
[    6.151787] bbswitch: disabling discrete graphics
[    6.169759] videodev: Linux video capture interface: v2.00
[    6.217584] Bluetooth: Core ver 2.22
[    6.217603] NET: Registered PF_BLUETOOTH protocol family
[    6.217604] Bluetooth: HCI device and connection manager initialized
[    6.217607] Bluetooth: HCI socket layer initialized
[    6.217609] Bluetooth: L2CAP socket layer initialized
[    6.217612] Bluetooth: SCO socket layer initialized
[    6.237793] loop8: detected capacity change from 0 to 8
[    6.367390] usb 1-12: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:2b95)
[    6.367578] usbcore: registered new interface driver btusb
[    6.378540] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[    6.383556] Bluetooth: hci0: Device revision is 5
[    6.383560] Bluetooth: hci0: Secure boot is enabled
[    6.383561] Bluetooth: hci0: OTP lock is enabled
[    6.383562] Bluetooth: hci0: API lock is enabled
[    6.383563] Bluetooth: hci0: Debug lock is disabled
[    6.383564] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    6.412227] usbcore: registered new interface driver uvcvideo
[    6.426015] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[    6.505093] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.505098] Bluetooth: BNEP filters: protocol multicast
[    6.505102] Bluetooth: BNEP socket layer initialized
[    6.696271] Bluetooth: hci0: Failed to send firmware data (-38)
[    6.697512] Bluetooth: hci0: Intel reset sent to retry FW download
[    6.942551] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[    8.954217] Bluetooth: hci0: command 0xfca6 tx timeout
[   10.233964] pci 0000:01:00.0: not ready 1023ms after resume; waiting
[   10.792776] wlp2s0: authenticate with 82:cb:bc:38:60:18
[   10.792803] wlp2s0: 80 MHz not supported, disabling VHT
[   10.801426] wlp2s0: send auth to 82:cb:bc:38:60:18 (try 1/3)
[   10.810158] wlp2s0: authenticated
[   10.814000] wlp2s0: associate with 82:cb:bc:38:60:18 (try 1/3)
[   10.821386] wlp2s0: RX AssocResp from 82:cb:bc:38:60:18 (capab=0x411 status=0 aid=1)
[   10.825683] wlp2s0: associated
[   10.924095] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[   10.954487] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   11.127302] psmouse serio1: Failed to enable mouse on isa0060/serio1
[   11.277279] pci 0000:01:00.0: not ready 2047ms after resume; waiting
[   13.434123] pci 0000:01:00.0: not ready 4095ms after resume; waiting
[   13.578938] usb 1-4: USB disconnect, device number 2
[   13.579082] Bluetooth: hci0: Reading supported features failed (-71)
[   13.579097] Bluetooth: hci0: Error reading debug features
[   13.870852] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[   14.012128] usb 1-4: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[   14.012144] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   14.015701] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[   14.020792] Bluetooth: hci0: Device revision is 5
[   14.020801] Bluetooth: hci0: Secure boot is enabled
[   14.020806] Bluetooth: hci0: OTP lock is enabled
[   14.020809] Bluetooth: hci0: API lock is enabled
[   14.020812] Bluetooth: hci0: Debug lock is disabled
[   14.020816] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[   14.132920] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[   16.245385] Bluetooth: hci0: Waiting for firmware download to complete
[   16.245741] Bluetooth: hci0: Firmware loaded in 2063293 usecs
[   16.245958] Bluetooth: hci0: Waiting for device to boot
[   16.257828] Bluetooth: hci0: Device booted in 11755 usecs
[   16.257852] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[   16.263137] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[   16.266877] Bluetooth: hci0: Applying Intel DDC parameters completed
[   16.267878] Bluetooth: hci0: Firmware revision 0.0 build 14 week 44 2021
[   16.269865] Bluetooth: hci0: Reading supported features failed (-16)
[   16.269878] Bluetooth: hci0: Error reading debug features
[   16.316322] Bluetooth: MGMT ver 1.22
[   16.335626] NET: Registered PF_ALG protocol family
[   17.700829] pci 0000:01:00.0: not ready 8191ms after resume; waiting
[   26.020804] pci 0000:01:00.0: not ready 16383ms after resume; waiting
[   42.634097] pci 0000:01:00.0: not ready 32767ms after resume; waiting
[   76.932716] pci 0000:01:00.0: not ready 65535ms after resume; giving up
[   77.012934] pci 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
[   79.518611] pci 0000:01:00.0: not ready 1023ms after resume; waiting
[   80.558347] pci 0000:01:00.0: not ready 2047ms after resume; waiting
[   82.690936] pci 0000:01:00.0: not ready 4095ms after resume; waiting
[   86.956532] pci 0000:01:00.0: not ready 8191ms after resume; waiting
[   95.274960] pci 0000:01:00.0: not ready 16383ms after resume; waiting
[  112.766043] pci 0000:01:00.0: not ready 32767ms after resume; waiting
[  146.895561] pci 0000:01:00.0: not ready 65535ms after resume; giving up
[  146.895666] pci 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
[  149.664742] rfkill: input handler disabled
[  149.690378] Bluetooth: RFCOMM TTY layer initialized
[  149.690386] Bluetooth: RFCOMM socket layer initialized
[  149.690390] Bluetooth: RFCOMM ver 1.11
[  159.041585] systemd-journald[191]: /var/log/journal/d47472ac809b49c8924bc470b5e92090/user-1000.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[  159.679392] rfkill: input handler enabled
[  161.827046] Bluetooth: hci0: Opcode 0x c24 failed: -110
[  161.827050] Bluetooth: hci0: command 0x0408 tx timeout
[  162.146923] pci 0000:01:00.0: not ready 1023ms after resume; waiting
[  163.186692] pci 0000:01:00.0: not ready 2047ms after resume; waiting
[  165.453101] pci 0000:01:00.0: not ready 4095ms after resume; waiting
[  169.719297] pci 0000:01:00.0: not ready 8191ms after resume; waiting
[  178.038548] pci 0000:01:00.0: not ready 16383ms after resume; waiting
[  194.680147] pci 0000:01:00.0: not ready 32767ms after resume; waiting
[  228.807284] pci 0000:01:00.0: not ready 65535ms after resume; giving up
[  228.807344] pci 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
[  233.863271] warning: `pool-gnome-shel' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[  233.885010] FAT-fs (sda): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  234.264752] rfkill: input handler disabled

Any hint on where to look ?

Thanks!

Yohan

seth · 2023-07-05 08:58:26

0000:01:00.0 is your nvidia GPU, it's apparently powered down by bbswitch which is (if intentional) not a problem per se.

Please post your complete system journal for the boot:

sudo journalctl -b | curl -F 'f:1=<-' ix.io

and the output of "systemd-analyze critical-chain"

ybon · 2023-07-05 19:19:19

Thanks!

Here it is: http://ix.io/4zQ8

# systemd-analyze critical-chain                                                                                                                                             9s 479ms
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.

graphical.target @2.962s
└─gdm.service @2.926s +31ms
  └─systemd-user-sessions.service @2.886s +22ms
    └─nss-user-lookup.target @2.968s

Thanks a lot for your help

seth · 2023-07-05 19:51:45

juil. 05 21:12:01 leonardo kernel: microcode: updated early: 0xdc -> 0xf0, date = 2021-11-12
…
juil. 05 21:12:03 leonardo systemd[1]: Reached target Graphical Interface.
…
juil. 05 21:13:25 leonardo systemd-logind[467]: New session 3 of user ybon.

The system boots in 2-3 seconds (also see the critical chain) but it takes 82s afterwards for you to log in (or probably GDM to do anything)
I've no idea whether GDM/wayland is even supposed to work w/ bumblebee - does https://wiki.archlinux.org/title/GDM#Use_Xorg_backend work as expected?

ybon · 2023-07-07 05:02:24

seth wrote:

does https://wiki.archlinux.org/title/GDM#Use_Xorg_backend work as expected?

Sadly, no, I don't see any difference when switching to Xorg

One thing I can add, that may help finding the guilty bit, it that when I switch off the computer, it either does anything (so I need to force with the physical button), either it will hang on a job from "Bumblebee C Daemon".
So maybe all this is related to bumblebee ?

PS: sorry for my lag, but I'm traveling with a boat, so I don't always have Internet around.

seth · 2023-07-07 06:52:35

bumblebee/bbswitch powers the GPU down and makes it inaccessible - the question is why - or whether - this stalls anything.
Disable bumblebee and see whether
a) the

juil. 05 21:12:41 leonardo kernel: pci 0000:01:00.0: not ready 32767ms after resume; waiting
juil. 05 21:13:15 leonardo kernel: pci 0000:01:00.0: not ready 65535ms after resume; giving up

messages disappear
b) GDM shows up immediately
So we'll at least know where to look at

nika · 2023-07-08 17:37:07

Seeing similar symptoms on Manjaro, not related to bumblebee since I use nvidia-exec https://forum.manjaro.org/t/testing-upd … /13?u=nika

seth · 2023-07-08 18:26:05

Does nvidia-exec power the chip down?
Please post your system journal.

ybon · 2023-07-09 14:20:40

After disabling bumblebee, it's indeed much better (`sudo systemctl disable bumblebeed.service`)!

[    0.000000] microcode: updated early: 0xdc -> 0xf0, date = 2021-11-12
[    0.000000] Linux version 6.4.2-arch1-1 (linux@archlinux) (gcc (GCC) 13.1.1 20230429, GNU ld (GNU Binutils) 2.40.0) #1 SMP PREEMPT_DYNAMIC Thu, 06 Jul 2023 18:35:54 +0000
[    0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002e08efff] usable
[    0.000000] BIOS-e820: [mem 0x000000002e08f000-0x000000002e08ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000002e090000-0x000000002e0b9fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000002e0ba000-0x00000000397eafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000397eb000-0x0000000039b74fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000039b75000-0x0000000039bb2fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000039bb3000-0x0000000039e44fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000039e45000-0x000000003a4fefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003a4ff000-0x000000003a4fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003a500000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004bdffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x2c4a4018-0x2c4bd657] usable ==> usable
[    0.000000] e820: update [mem 0x2c4a4018-0x2c4bd657] usable ==> usable
[    0.000000] e820: update [mem 0x2c493018-0x2c4a3057] usable ==> usable
[    0.000000] e820: update [mem 0x2c493018-0x2c4a3057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000002c493017] usable
[    0.000000] reserve setup_data: [mem 0x000000002c493018-0x000000002c4a3057] usable
[    0.000000] reserve setup_data: [mem 0x000000002c4a3058-0x000000002c4a4017] usable
[    0.000000] reserve setup_data: [mem 0x000000002c4a4018-0x000000002c4bd657] usable
[    0.000000] reserve setup_data: [mem 0x000000002c4bd658-0x000000002e08efff] usable
[    0.000000] reserve setup_data: [mem 0x000000002e08f000-0x000000002e08ffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000002e090000-0x000000002e0b9fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000002e0ba000-0x00000000397eafff] usable
[    0.000000] reserve setup_data: [mem 0x00000000397eb000-0x0000000039b74fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000039b75000-0x0000000039bb2fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x0000000039bb3000-0x0000000039e44fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000039e45000-0x000000003a4fefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000003a4ff000-0x000000003a4fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000003a500000-0x000000003fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004bdffffff] usable
[    0.000000] efi: EFI v2.4 by American Megatrends
[    0.000000] efi: ACPI=0x39b81000 ACPI 2.0=0x39b81000 SMBIOS=0xf0000 MEMATTR=0x375a2018 INITRD=0x2e129918 
[    0.000000] efi: Remove mem31: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[    0.000000] efi: Not removing mem32: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem33: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem34: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem35: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Dell Inc. Precision 5510/0W7V82, BIOS 1.15.0 07/23/2020
[    0.000000] tsc: Detected 2300.000 MHz processor
[    0.000000] tsc: Detected 2299.968 MHz TSC
[    0.001004] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001007] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001020] last_pfn = 0x4be000 max_arch_pfn = 0x400000000
[    0.001032] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001392] last_pfn = 0x3a500 max_arch_pfn = 0x400000000
[    0.011170] Using GB pages for direct mapping
[    0.011589] Secure boot disabled
[    0.011589] RAMDISK: [mem 0x2a6b8000-0x2bdc3fff]
[    0.011594] ACPI: Early table checksum verification disabled
[    0.011598] ACPI: RSDP 0x0000000039B81000 000024 (v02 DELL  )
[    0.011602] ACPI: XSDT 0x0000000039B810B8 0000EC (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.011609] ACPI: FACP 0x0000000039BA1F68 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
[    0.011615] ACPI: DSDT 0x0000000039B81230 020D35 (v02 DELL   CBX3     01072009 INTL 20120913)
[    0.011619] ACPI: FACS 0x0000000039E3ED80 000040
[    0.011622] ACPI: APIC 0x0000000039BA2078 000084 (v03 DELL   CBX3     01072009 AMI  00010013)
[    0.011625] ACPI: FPDT 0x0000000039BA2100 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.011629] ACPI: MCFG 0x0000000039BA2148 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.011632] ACPI: HPET 0x0000000039BA2188 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
[    0.011635] ACPI: SSDT 0x0000000039BA21C0 000495 (v01 IdeRef IdeTable 00001000 INTL 20120913)
[    0.011639] ACPI: LPIT 0x0000000039BA2658 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.011642] ACPI: SSDT 0x0000000039BA26F0 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
[    0.011646] ACPI: SSDT 0x0000000039BA2938 002BAE (v02 INTEL  PtidDevc 00001000 INTL 20120913)
[    0.011649] ACPI: SSDT 0x0000000039BA54E8 000024 (v02 INTEL  OEM_RTD3 00001000 INTL 20120913)
[    0.011652] ACPI: SSDT 0x0000000039BA5510 000BE3 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
[    0.011656] ACPI: SSDT 0x0000000039BA60F8 0004DC (v02 INTEL  zpodd    00001000 INTL 20120913)
[    0.011659] ACPI: DBGP 0x0000000039BA65D8 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.011662] ACPI: DBG2 0x0000000039BA6610 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.011666] ACPI: SSDT 0x0000000039BA6668 000775 (v02 INTEL  xh_rvp10 00000000 INTL 20120913)
[    0.011669] ACPI: BOOT 0x0000000039BA6DE0 000028 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.011672] ACPI: SSDT 0x0000000039BA6E08 0037D6 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.011676] ACPI: UEFI 0x0000000039BAA5E0 000042 (v01                 00000000      00000000)
[    0.011679] ACPI: SSDT 0x0000000039BAA628 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.011683] ACPI: SSDT 0x0000000039BAB4A0 0044FA (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[    0.011687] ACPI: BGRT 0x0000000039BAF9A0 000038 (v00 ?lr;            01072009 AMI  00010013)
[    0.011690] ACPI: SSDT 0x0000000039BAF9D8 0000C3 (v02 SgRef  SgPeg    00001000 INTL 20120913)
[    0.011694] ACPI: DMAR 0x0000000039BAFAA0 0000F0 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.011697] ACPI: SSDT 0x0000000039BAFB90 001868 (v01 OptRef OptTabl  00001000 INTL 20120913)
[    0.011700] ACPI: ASF! 0x0000000039BB13F8 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.011703] ACPI: Reserving FACP table memory at [mem 0x39ba1f68-0x39ba2073]
[    0.011705] ACPI: Reserving DSDT table memory at [mem 0x39b81230-0x39ba1f64]
[    0.011706] ACPI: Reserving FACS table memory at [mem 0x39e3ed80-0x39e3edbf]
[    0.011707] ACPI: Reserving APIC table memory at [mem 0x39ba2078-0x39ba20fb]
[    0.011708] ACPI: Reserving FPDT table memory at [mem 0x39ba2100-0x39ba2143]
[    0.011709] ACPI: Reserving MCFG table memory at [mem 0x39ba2148-0x39ba2183]
[    0.011710] ACPI: Reserving HPET table memory at [mem 0x39ba2188-0x39ba21bf]
[    0.011711] ACPI: Reserving SSDT table memory at [mem 0x39ba21c0-0x39ba2654]
[    0.011712] ACPI: Reserving LPIT table memory at [mem 0x39ba2658-0x39ba26eb]
[    0.011713] ACPI: Reserving SSDT table memory at [mem 0x39ba26f0-0x39ba2937]
[    0.011714] ACPI: Reserving SSDT table memory at [mem 0x39ba2938-0x39ba54e5]
[    0.011715] ACPI: Reserving SSDT table memory at [mem 0x39ba54e8-0x39ba550b]
[    0.011716] ACPI: Reserving SSDT table memory at [mem 0x39ba5510-0x39ba60f2]
[    0.011717] ACPI: Reserving SSDT table memory at [mem 0x39ba60f8-0x39ba65d3]
[    0.011718] ACPI: Reserving DBGP table memory at [mem 0x39ba65d8-0x39ba660b]
[    0.011719] ACPI: Reserving DBG2 table memory at [mem 0x39ba6610-0x39ba6663]
[    0.011719] ACPI: Reserving SSDT table memory at [mem 0x39ba6668-0x39ba6ddc]
[    0.011720] ACPI: Reserving BOOT table memory at [mem 0x39ba6de0-0x39ba6e07]
[    0.011721] ACPI: Reserving SSDT table memory at [mem 0x39ba6e08-0x39baa5dd]
[    0.011722] ACPI: Reserving UEFI table memory at [mem 0x39baa5e0-0x39baa621]
[    0.011723] ACPI: Reserving SSDT table memory at [mem 0x39baa628-0x39bab49a]
[    0.011724] ACPI: Reserving SSDT table memory at [mem 0x39bab4a0-0x39baf999]
[    0.011725] ACPI: Reserving BGRT table memory at [mem 0x39baf9a0-0x39baf9d7]
[    0.011726] ACPI: Reserving SSDT table memory at [mem 0x39baf9d8-0x39bafa9a]
[    0.011727] ACPI: Reserving DMAR table memory at [mem 0x39bafaa0-0x39bafb8f]
[    0.011728] ACPI: Reserving SSDT table memory at [mem 0x39bafb90-0x39bb13f7]
[    0.011729] ACPI: Reserving ASF! table memory at [mem 0x39bb13f8-0x39bb149c]
[    0.011847] No NUMA configuration found
[    0.011848] Faking a node at [mem 0x0000000000000000-0x00000004bdffffff]
[    0.011852] NODE_DATA(0) allocated [mem 0x4bdffb000-0x4bdffffff]
[    0.011884] Zone ranges:
[    0.011884]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.011887]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.011888]   Normal   [mem 0x0000000100000000-0x00000004bdffffff]
[    0.011890]   Device   empty
[    0.011891] Movable zone start for each node
[    0.011892] Early memory node ranges
[    0.011892]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.011894]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.011895]   node   0: [mem 0x0000000000100000-0x000000002e08efff]
[    0.011897]   node   0: [mem 0x000000002e0ba000-0x00000000397eafff]
[    0.011898]   node   0: [mem 0x000000003a4ff000-0x000000003a4fffff]
[    0.011899]   node   0: [mem 0x0000000100000000-0x00000004bdffffff]
[    0.011901] Initmem setup node 0 [mem 0x0000000000001000-0x00000004bdffffff]
[    0.011906] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.011908] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.011946] On node 0, zone DMA: 98 pages in unavailable ranges
[    0.013866] On node 0, zone DMA32: 43 pages in unavailable ranges
[    0.013917] On node 0, zone DMA32: 3348 pages in unavailable ranges
[    0.052706] On node 0, zone Normal: 23296 pages in unavailable ranges
[    0.052796] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.052820] Reserving Intel graphics memory at [mem 0x3c000000-0x3fffffff]
[    0.053093] ACPI: PM-Timer IO Port: 0x1808
[    0.053105] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.053110] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.053111] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.053112] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.053140] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.053143] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.053145] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.053150] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.053151] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.053157] e820: update [mem 0x37139000-0x37348fff] usable ==> reserved
[    0.053173] TSC deadline timer available
[    0.053174] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.053192] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.053194] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.053196] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.053198] PM: hibernation: Registered nosave memory: [mem 0x2c493000-0x2c493fff]
[    0.053200] PM: hibernation: Registered nosave memory: [mem 0x2c4a3000-0x2c4a3fff]
[    0.053201] PM: hibernation: Registered nosave memory: [mem 0x2c4a4000-0x2c4a4fff]
[    0.053203] PM: hibernation: Registered nosave memory: [mem 0x2c4bd000-0x2c4bdfff]
[    0.053205] PM: hibernation: Registered nosave memory: [mem 0x2e08f000-0x2e08ffff]
[    0.053205] PM: hibernation: Registered nosave memory: [mem 0x2e090000-0x2e0b9fff]
[    0.053207] PM: hibernation: Registered nosave memory: [mem 0x37139000-0x37348fff]
[    0.053209] PM: hibernation: Registered nosave memory: [mem 0x397eb000-0x39b74fff]
[    0.053210] PM: hibernation: Registered nosave memory: [mem 0x39b75000-0x39bb2fff]
[    0.053211] PM: hibernation: Registered nosave memory: [mem 0x39bb3000-0x39e44fff]
[    0.053212] PM: hibernation: Registered nosave memory: [mem 0x39e45000-0x3a4fefff]
[    0.053213] PM: hibernation: Registered nosave memory: [mem 0x3a500000-0x3fffffff]
[    0.053214] PM: hibernation: Registered nosave memory: [mem 0x40000000-0xfdffffff]
[    0.053215] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.053216] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.053217] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.053217] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.053218] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.053219] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.053221] [mem 0x40000000-0xfdffffff] available for PCI devices
[    0.053222] Booting paravirtualized kernel on bare hardware
[    0.053231] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.060513] setup_percpu: NR_CPUS:320 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.060961] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u524288
[    0.060968] pcpu-alloc: s225280 r8192 d28672 u524288 alloc=1*2097152
[    0.060971] pcpu-alloc: [0] 0 1 2 3 
[    0.060991] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p3 rw
[    0.061096] random: crng init done
[    0.063562] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.064842] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.064918] Fallback order for Node 0: 0 
[    0.064921] Built 1 zonelists, mobility grouping on.  Total pages: 4094177
[    0.064923] Policy zone: Normal
[    0.065251] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.065264] software IO TLB: area num 4.
[    0.140533] Memory: 16173340K/16637300K available (16384K kernel code, 2119K rwdata, 12752K rodata, 3332K init, 4008K bss, 463700K reserved, 0K cma-reserved)
[    0.140664] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.140676] Kernel/User page tables isolation: enabled
[    0.140709] ftrace: allocating 47524 entries in 186 pages
[    0.150655] ftrace: allocated 186 pages with 5 groups
[    0.150740] Dynamic Preempt: full
[    0.150769] rcu: Preemptible hierarchical RCU implementation.
[    0.150770] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.150771] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.150772] 	Trampoline variant of Tasks RCU enabled.
[    0.150773] 	Rude variant of Tasks RCU enabled.
[    0.150773] 	Tracing variant of Tasks RCU enabled.
[    0.150774] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.150775] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.154285] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[    0.154500] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.154740] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.154777] spurious 8259A interrupt: IRQ7.
[    0.154812] Console: colour dummy device 80x25
[    0.154814] printk: console [tty0] enabled
[    0.154863] ACPI: Core revision 20230331
[    0.155316] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.155425] APIC: Switch to symmetric I/O mode setup
[    0.155427] DMAR: Host address width 39
[    0.155429] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.155435] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.155438] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.155442] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.155444] DMAR: RMRR base: 0x00000039908000 end: 0x00000039927fff
[    0.155446] DMAR: RMRR base: 0x0000003b800000 end: 0x0000003fffffff
[    0.155448] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.155449] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.155451] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.155453] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.155454] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.155455] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.157318] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.157320] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.161334] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.175393] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212717146a7, max_idle_ns: 440795291431 ns
[    0.175400] Calibrating delay loop (skipped), value calculated using timer frequency.. 4601.60 BogoMIPS (lpj=7666560)
[    0.175403] pid_max: default: 32768 minimum: 301
[    0.177461] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[    0.177478] landlock: Up and running.
[    0.177479] Yama: becoming mindful.
[    0.177485] LSM support for eBPF active
[    0.177537] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.177588] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.177844] x86/cpu: SGX disabled by BIOS.
[    0.177853] CPU0: Thermal monitoring enabled (TM1)
[    0.177905] process: using mwait in idle threads
[    0.177909] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.177910] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.177918] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.177927] Spectre V2 : Mitigation: IBRS
[    0.177929] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.177932] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.177933] RETBleed: Mitigation: IBRS
[    0.177935] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.177937] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.177948] MDS: Mitigation: Clear CPU buffers
[    0.177950] TAA: Mitigation: TSX disabled
[    0.177951] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.177958] SRBDS: Mitigation: Microcode
[    0.211578] Freeing SMP alternatives memory: 40K
[    0.212148] smpboot: CPU0: Intel(R) Core(TM) i5-6300HQ CPU @ 2.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.212351] cblist_init_generic: Setting adjustable number of callback queues.
[    0.212353] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.212373] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.212388] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.212402] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.212431] ... version:                4
[    0.212432] ... bit width:              48
[    0.212433] ... generic registers:      8
[    0.212434] ... value mask:             0000ffffffffffff
[    0.212436] ... max period:             00007fffffffffff
[    0.212437] ... fixed-purpose events:   3
[    0.212438] ... event mask:             00000007000000ff
[    0.212602] Estimated ratio of average max frequency by base frequency (times 1024): 1246
[    0.212632] rcu: Hierarchical SRCU implementation.
[    0.212634] rcu: 	Max phase no-delay instances is 1000.
[    0.213301] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.213364] smp: Bringing up secondary CPUs ...
[    0.213481] x86: Booting SMP configuration:
[    0.213482] .... node  #0, CPUs:      #1 #2 #3
[    0.222829] smp: Brought up 1 node, 4 CPUs
[    0.222829] smpboot: Max logical packages: 1
[    0.222829] smpboot: Total of 4 processors activated (18407.40 BogoMIPS)
[    0.223442] devtmpfs: initialized
[    0.223442] x86/mm: Memory block size: 128MB
[    0.226546] ACPI: PM: Registering ACPI NVS region [mem 0x2e08f000-0x2e08ffff] (4096 bytes)
[    0.226549] ACPI: PM: Registering ACPI NVS region [mem 0x39bb3000-0x39e44fff] (2695168 bytes)
[    0.226656] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.226665] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.226722] pinctrl core: initialized pinctrl subsystem
[    0.226938] PM: RTC time: 14:16:32, date: 2023-07-09
[    0.227529] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.227800] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.227974] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.228136] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.228158] audit: initializing netlink subsys (disabled)
[    0.228220] audit: type=2000 audit(1688912192.069:1): state=initialized audit_enabled=0 res=1
[    0.228220] thermal_sys: Registered thermal governor 'fair_share'
[    0.228220] thermal_sys: Registered thermal governor 'bang_bang'
[    0.228220] thermal_sys: Registered thermal governor 'step_wise'
[    0.228220] thermal_sys: Registered thermal governor 'user_space'
[    0.228220] thermal_sys: Registered thermal governor 'power_allocator'
[    0.228220] cpuidle: using governor ladder
[    0.228220] cpuidle: using governor menu
[    0.228220] Simple Boot Flag at 0x47 set to 0x80
[    0.228220] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.228220] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.228220] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.228220] PCI: not using MMCONFIG
[    0.228220] PCI: Using configuration type 1 for base access
[    0.228829] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.228838] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.242066] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.242066] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.242066] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.242066] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.242234] fbcon: Taking over console
[    0.242234] ACPI: Added _OSI(Module Device)
[    0.242234] ACPI: Added _OSI(Processor Device)
[    0.242234] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.242234] ACPI: Added _OSI(Processor Aggregator Device)
[    0.282265] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT1], AE_NOT_FOUND (20230331/dswload2-162)
[    0.282280] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230331/psobject-220)
[    0.282287] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[    0.298358] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.302213] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.316112] ACPI: Dynamic OEM Table Load:
[    0.316112] ACPI: SSDT 0xFFFF9937C1695800 000579 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.317586] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.319581] ACPI: Dynamic OEM Table Load:
[    0.319588] ACPI: SSDT 0xFFFF9937C1634000 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.322265] ACPI: Dynamic OEM Table Load:
[    0.322272] ACPI: SSDT 0xFFFF9937C1691000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.324665] ACPI: Dynamic OEM Table Load:
[    0.324671] ACPI: SSDT 0xFFFF9937C11F8600 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.329182] ACPI: EC: EC started
[    0.329184] ACPI: EC: interrupt blocked
[    0.332532] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.332535] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[    0.332537] ACPI: Interpreter enabled
[    0.332587] ACPI: PM: (supports S0 S3 S4 S5)
[    0.332588] ACPI: Using IOAPIC for interrupt routing
[    0.334856] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.336209] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[    0.336238] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.336241] PCI: Using E820 reservations for host bridge windows
[    0.337169] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.342650] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
[    0.392823] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
[    0.393436] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
[    0.396105] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[    0.396579] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[    0.397053] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[    0.397522] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[    0.397988] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[    0.398459] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[    0.398936] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[    0.399408] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[    0.399875] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[    0.400344] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[    0.400814] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[    0.401280] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[    0.401748] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[    0.402225] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[    0.402693] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[    0.403160] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[    0.403626] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[    0.404100] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[    0.404579] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[    0.405549] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[    0.429045] ACPI: \_TZ_.FN00: New power resource
[    0.429167] ACPI: \_TZ_.FN01: New power resource
[    0.429289] ACPI: \_TZ_.FN02: New power resource
[    0.429405] ACPI: \_TZ_.FN03: New power resource
[    0.429535] ACPI: \_TZ_.FN04: New power resource
[    0.431097] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.431117] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.431182] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.431185] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.431187] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[    0.432437] PCI host bridge to bus 0000:00
[    0.432440] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.432443] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.432446] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.432448] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000effff window]
[    0.432450] pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff window]
[    0.432452] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.432454] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.432490] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[    0.432603] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.432679] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.433358] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[    0.433380] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[    0.433397] pci 0000:00:02.0: reg 0x18: [mem 0x70000000-0x7fffffff 64bit pref]
[    0.433408] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.433442] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.433448] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.433685] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.433704] pci 0000:00:04.0: reg 0x10: [mem 0xddd20000-0xddd27fff 64bit]
[    0.434127] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.434158] pci 0000:00:14.0: reg 0x10: [mem 0xddd10000-0xddd1ffff 64bit]
[    0.434257] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.434688] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.434719] pci 0000:00:14.2: reg 0x10: [mem 0xddd34000-0xddd34fff 64bit]
[    0.435016] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
[    0.435225] pci 0000:00:15.0: reg 0x10: [mem 0xddd33000-0xddd33fff 64bit]
[    0.436451] pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
[    0.436647] pci 0000:00:15.1: reg 0x10: [mem 0xddd32000-0xddd32fff 64bit]
[    0.437817] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.437845] pci 0000:00:16.0: reg 0x10: [mem 0xddd31000-0xddd31fff 64bit]
[    0.437930] pci 0000:00:16.0: PME# supported from D3hot
[    0.438286] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.438385] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.439279] pci 0000:00:1c.1: [8086:a111] type 01 class 0x060400
[    0.439381] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.440245] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.440350] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.441221] pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
[    0.441317] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.442162] pci 0000:00:1d.6: [8086:a11e] type 01 class 0x060400
[    0.442264] pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold
[    0.443128] pci 0000:00:1f.0: [8086:a150] type 00 class 0x060100
[    0.443640] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.443660] pci 0000:00:1f.2: reg 0x10: [mem 0xddd2c000-0xddd2ffff]
[    0.444052] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040380
[    0.444082] pci 0000:00:1f.3: reg 0x10: [mem 0xddd28000-0xddd2bfff 64bit]
[    0.444120] pci 0000:00:1f.3: reg 0x20: [mem 0xddd00000-0xddd0ffff 64bit]
[    0.444172] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.445042] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.445101] pci 0000:00:1f.4: reg 0x10: [mem 0xddd30000-0xddd300ff 64bit]
[    0.445174] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.445621] pci 0000:01:00.0: [10de:13b1] type 00 class 0x030200
[    0.445647] pci 0000:01:00.0: reg 0x10: [mem 0xdc000000-0xdcffffff]
[    0.445669] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.445692] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.445707] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.445723] pci 0000:01:00.0: reg 0x30: [mem 0xdd000000-0xdd07ffff pref]
[    0.445746] pci 0000:01:00.0: Enabling HDA controller
[    0.445817] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.446328] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.446332] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.446335] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdd0fffff]
[    0.446339] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.446451] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[    0.446504] pci 0000:02:00.0: reg 0x10: [mem 0xddc00000-0xddc01fff 64bit]
[    0.446721] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.447416] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.447422] pci 0000:00:1c.0:   bridge window [mem 0xddc00000-0xddcfffff]
[    0.447498] pci 0000:03:00.0: [10ec:525a] type 00 class 0xff0000
[    0.447541] pci 0000:03:00.0: reg 0x14: [mem 0xdd100000-0xdd100fff]
[    0.447694] pci 0000:03:00.0: supports D1 D2
[    0.447696] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.448259] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.448263] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.448266] pci 0000:00:1c.1:   bridge window [mem 0xdd100000-0xddafffff]
[    0.448270] pci 0000:00:1c.1:   bridge window [mem 0xc2100000-0xc2afffff 64bit pref]
[    0.448340] pci 0000:04:00.0: [1179:010f] type 00 class 0x010802
[    0.448371] pci 0000:04:00.0: reg 0x10: [mem 0xddb00000-0xddb03fff 64bit]
[    0.448442] pci 0000:04:00.0: enabling Extended Tags
[    0.449079] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.449085] pci 0000:00:1d.0:   bridge window [mem 0xddb00000-0xddbfffff]
[    0.449145] pci 0000:00:1d.4: PCI bridge to [bus 05]
[    0.449203] pci 0000:00:1d.6: PCI bridge to [bus 06-3e]
[    0.449208] pci 0000:00:1d.6:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.449212] pci 0000:00:1d.6:   bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
[    0.452790] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.452875] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.452957] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.453039] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.453121] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[    0.453203] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[    0.453284] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.453366] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.456407] ACPI: EC: interrupt unblocked
[    0.456409] ACPI: EC: event unblocked
[    0.456418] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.456420] ACPI: EC: GPE=0x14
[    0.456422] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[    0.456424] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[    0.458749] iommu: Default domain type: Translated 
[    0.458749] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.458952] SCSI subsystem initialized
[    0.458963] libata version 3.00 loaded.
[    0.458963] ACPI: bus type USB registered
[    0.458963] usbcore: registered new interface driver usbfs
[    0.458963] usbcore: registered new interface driver hub
[    0.458963] usbcore: registered new device driver usb
[    0.458963] pps_core: LinuxPPS API ver. 1 registered
[    0.458963] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.458963] PTP clock support registered
[    0.458963] EDAC MC: Ver: 3.0.0
[    0.459288] efivars: Registered efivars operations
[    0.459288] NetLabel: Initializing
[    0.459288] NetLabel:  domain hash size = 128
[    0.459288] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.459288] NetLabel:  unlabeled traffic allowed by default
[    0.459288] mctp: management component transport protocol core
[    0.459288] NET: Registered PF_MCTP protocol family
[    0.459288] PCI: Using ACPI for IRQ routing
[    0.482081] PCI: pci_cache_line_size set to 64 bytes
[    0.482469] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.482472] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.482474] e820: reserve RAM buffer [mem 0x2c493018-0x2fffffff]
[    0.482476] e820: reserve RAM buffer [mem 0x2c4a4018-0x2fffffff]
[    0.482477] e820: reserve RAM buffer [mem 0x2e08f000-0x2fffffff]
[    0.482479] e820: reserve RAM buffer [mem 0x37139000-0x37ffffff]
[    0.482480] e820: reserve RAM buffer [mem 0x397eb000-0x3bffffff]
[    0.482482] e820: reserve RAM buffer [mem 0x3a500000-0x3bffffff]
[    0.482483] e820: reserve RAM buffer [mem 0x4be000000-0x4bfffffff]
[    0.482530] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.482530] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.482530] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.482530] vgaarb: loaded
[    0.483716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.483735] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.485460] clocksource: Switched to clocksource tsc-early
[    0.497560] VFS: Disk quotas dquot_6.6.0
[    0.497575] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.497685] pnp: PnP ACPI init
[    0.498077] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.498082] system 00:00: [io  0xffff] has been reserved
[    0.498084] system 00:00: [io  0xffff] has been reserved
[    0.498087] system 00:00: [io  0xffff] has been reserved
[    0.498089] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.498091] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.498223] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.498307] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.498975] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.498979] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.498982] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.498984] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.498987] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.498989] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.498992] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.498994] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.498996] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.498999] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.499066] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.499069] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.499071] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.499073] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.499076] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.499078] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.499080] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.499509] system 00:08: [io  0xff00-0xfffe] has been reserved
[    0.501407] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.501411] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.501414] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.504866] pnp: PnP ACPI: found 10 devices
[    0.510822] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.510900] NET: Registered PF_INET protocol family
[    0.511080] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.514619] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.514664] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.514751] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.515008] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.515323] TCP: Hash tables configured (established 131072 bind 65536)
[    0.515422] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.515491] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.515538] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.515611] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.515619] NET: Registered PF_XDP protocol family
[    0.515629] pci 0000:00:1d.6: bridge window [io  0x1000-0x0fff] to [bus 06-3e] add_size 1000
[    0.515641] pci 0000:00:1d.6: BAR 13: assigned [io  0x2000-0x2fff]
[    0.515644] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.515647] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.515655] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdd0fffff]
[    0.515662] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.515674] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.515682] pci 0000:00:1c.0:   bridge window [mem 0xddc00000-0xddcfffff]
[    0.515698] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.515700] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.515709] pci 0000:00:1c.1:   bridge window [mem 0xdd100000-0xddafffff]
[    0.515716] pci 0000:00:1c.1:   bridge window [mem 0xc2100000-0xc2afffff 64bit pref]
[    0.515728] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.515736] pci 0000:00:1d.0:   bridge window [mem 0xddb00000-0xddbfffff]
[    0.515751] pci 0000:00:1d.4: PCI bridge to [bus 05]
[    0.515774] pci 0000:00:1d.6: PCI bridge to [bus 06-3e]
[    0.515776] pci 0000:00:1d.6:   bridge window [io  0x2000-0x2fff]
[    0.515784] pci 0000:00:1d.6:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.515791] pci 0000:00:1d.6:   bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
[    0.515802] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.515804] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.515806] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.515808] pci_bus 0000:00: resource 7 [mem 0x000e4000-0x000effff window]
[    0.515810] pci_bus 0000:00: resource 8 [mem 0x40000000-0xdfffffff window]
[    0.515812] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
[    0.515814] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.515816] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
[    0.515818] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.515820] pci_bus 0000:02: resource 1 [mem 0xddc00000-0xddcfffff]
[    0.515822] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.515823] pci_bus 0000:03: resource 1 [mem 0xdd100000-0xddafffff]
[    0.515825] pci_bus 0000:03: resource 2 [mem 0xc2100000-0xc2afffff 64bit pref]
[    0.515827] pci_bus 0000:04: resource 1 [mem 0xddb00000-0xddbfffff]
[    0.515832] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.515833] pci_bus 0000:06: resource 1 [mem 0xc4000000-0xda0fffff]
[    0.515835] pci_bus 0000:06: resource 2 [mem 0x80000000-0xa1ffffff 64bit pref]
[    0.516716] PCI: CLS 0 bytes, default 64
[    0.516728] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:15.0
[    0.516733] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:15.1
[    0.516746] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.516747] software IO TLB: mapped [mem 0x0000000033139000-0x0000000037139000] (64MB)
[    0.516777] Trying to unpack rootfs image as initramfs...
[    0.528228] Initialise system trusted keyrings
[    0.528238] Key type blacklist registered
[    0.528279] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.528301] zbud: loaded
[    0.528482] integrity: Platform Keyring initialized
[    0.528485] integrity: Machine keyring initialized
[    0.538490] Key type asymmetric registered
[    0.538493] Asymmetric key parser 'x509' registered
[    0.538515] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.538572] io scheduler mq-deadline registered
[    0.538573] io scheduler kyber registered
[    0.538585] io scheduler bfq registered
[    0.540132] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.544952] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.CHRG], AE_NOT_FOUND (20230331/psargs-330)
[    0.544970] ACPI Error: Aborting method \PNOT due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.544980] ACPI Error: Aborting method \_SB.AC._PSR due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.544992] ACPI: \_SB_.AC__: Error reading AC Adapter state: AE_NOT_FOUND
[    0.545095] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.547529] ACPI: button: Lid Switch [LID0]
[    0.547578] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.550801] ACPI: button: Power Button [PBTN]
[    0.550839] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.550859] ACPI: button: Sleep Button [SBTN]
[    0.550894] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.554196] ACPI: button: Power Button [PWRF]
[    0.556648] thermal LNXTHERM:00: registered as thermal_zone0
[    0.556651] ACPI: thermal: Thermal Zone [THM] (25 C)
[    0.556854] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20230331/psargs-330)
[    0.556868] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.557070] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20230331/psargs-330)
[    0.557080] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.557168] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20230331/psargs-330)
[    0.557178] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.557256] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20230331/psargs-330)
[    0.557266] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.557619] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.561947] Non-volatile memory driver v1.3
[    0.561954] Linux agpgart interface v0.103
[    0.562010] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.562064] ACPI: bus type drm_connector registered
[    0.564286] usbcore: registered new interface driver usbserial_generic
[    0.564292] usbserial: USB Serial support registered for generic
[    0.564519] rtc_cmos 00:02: RTC can wake from S4
[    0.565520] rtc_cmos 00:02: registered as rtc0
[    0.565649] rtc_cmos 00:02: setting system clock to 2023-07-09T14:16:33 UTC (1688912193)
[    0.565978] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[    0.566105] intel_pstate: Intel P-state driver initializing
[    0.566259] intel_pstate: HWP enabled
[    0.566280] ledtrig-cpu: registered to indicate activity on CPUs
[    0.566910] efifb: probing for efifb
[    0.566922] efifb: framebuffer at 0x70000000, using 32400k, total 32400k
[    0.566924] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[    0.566925] efifb: scrolling: redraw
[    0.566926] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.567022] Console: switching to colour frame buffer device 240x67
[    0.575977] fb0: EFI VGA frame buffer device
[    0.576009] hid: raw HID events driver (C) Jiri Kosina
[    0.576271] intel_pmc_core INT33A1:00:  initialized
[    0.576726] drop_monitor: Initializing network drop monitor service
[    0.599664] Initializing XFRM netlink socket
[    0.599694] NET: Registered PF_INET6 protocol family
[    0.601153] ACPI: battery: Slot [BAT0] (battery present)
[    0.621898] Freeing initrd memory: 23600K
[    0.629241] Segment Routing with IPv6
[    0.629243] RPL Segment Routing with IPv6
[    0.629268] In-situ OAM (IOAM) with IPv6
[    0.629296] NET: Registered PF_PACKET protocol family
[    0.630057] microcode: Microcode Update Driver: v2.2.
[    0.630079] IPI shorthand broadcast: enabled
[    0.631796] sched_clock: Marking stable (630001503, 773725)->(635198290, -4423062)
[    0.632097] registered taskstats version 1
[    0.632495] Loading compiled-in X.509 certificates
[    0.635229] Loaded X.509 cert 'Build time autogenerated kernel key: b05c4955678713ba4595009c5e6cacfc773b1b46'
[    0.635777] zswap: loaded using pool zstd/zsmalloc
[    0.637922] Key type .fscrypt registered
[    0.637925] Key type fscrypt-provisioning registered
[    0.638218] integrity: Loading X.509 certificate: UEFI:db
[    0.638258] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.638259] integrity: Loading X.509 certificate: UEFI:db
[    0.638276] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.638902] PM:   Magic number: 15:884:282
[    0.638944] tty tty19: hash matches
[    0.638978] memory memory148: hash matches
[    0.644409] RAS: Correctable Errors collector initialized.
[    0.644465] clk: Disabling unused clocks
[    0.645535] Freeing unused decrypted memory: 2036K
[    0.645985] Freeing unused kernel image (initmem) memory: 3332K
[    0.681065] Write protecting the kernel read-only data: 30720k
[    0.681780] Freeing unused kernel image (rodata/data gap) memory: 1584K
[    0.741843] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.741846] rodata_test: all tests were successful
[    0.741847] x86/mm: Checking user space page tables
[    0.788222] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.788225] Run /init as init process
[    0.788226]   with arguments:
[    0.788227]     /init
[    0.788228]   with environment:
[    0.788229]     HOME=/
[    0.788230]     TERM=linux
[    0.982673] wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
[    0.992752] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.994411] i8042: Warning: Keylock active
[    0.996794] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.996845] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.008272] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.008279] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.009355] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[    1.009656] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.009659] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.009662] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.012751] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[    1.012755] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.012757] usb usb1: Product: xHCI Host Controller
[    1.012762] usb usb1: Manufacturer: Linux 6.4.2-arch1-1 xhci-hcd
[    1.012764] usb usb1: SerialNumber: 0000:00:14.0
[    1.012928] hub 1-0:1.0: USB hub found
[    1.012946] hub 1-0:1.0: 16 ports detected
[    1.017011] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[    1.017015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.017017] usb usb2: Product: xHCI Host Controller
[    1.017019] usb usb2: Manufacturer: Linux 6.4.2-arch1-1 xhci-hcd
[    1.017020] usb usb2: SerialNumber: 0000:00:14.0
[    1.017169] hub 2-0:1.0: USB hub found
[    1.017183] hub 2-0:1.0: 10 ports detected
[    1.017900] usb: port power management may be unreliable
[    1.024849] nvme nvme0: pci function 0000:04:00.0
[    1.030855] nvme nvme0: 4/0/0 default/read/poll queues
[    1.032373]  nvme0n1: p1 p2 p3
[    1.062375] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.264166] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.405465] usb 1-4: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[    1.405468] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.471826] Console: switching to colour dummy device 80x25
[    1.471887] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.474758] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.475180] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    1.517484] tsc: Refined TSC clocksource calibration: 2303.999 MHz
[    1.517498] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f6faae8, max_idle_ns: 440795313647 ns
[    1.517541] clocksource: Switched to clocksource tsc
[    1.527717] usb 1-12: new high-speed USB device number 3 using xhci_hcd
[    1.547304] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    1.552718] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.554515] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.554767] ACPI: video: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    1.554860] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input7
[    1.584539] fbcon: i915drmfb (fb0) is primary device
[    1.676960] usb 1-12: New USB device found, idVendor=1bcf, idProduct=2b95, bcdDevice=56.05
[    1.676971] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.676976] usb 1-12: Product: Integrated_Webcam_HD
[    1.676980] usb 1-12: Manufacturer: CNFEH73M073010000912
[    2.704122] Console: switching to colour frame buffer device 240x67
[    2.729794] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    2.936759] EXT4-fs (nvme0n1p3): mounted filesystem abdb92fd-375b-4517-919e-e174070c2c02 r/w with ordered data mode. Quota mode: none.
[    3.043640] systemd[1]: systemd 253.5-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    3.043649] systemd[1]: Detected architecture x86-64.
[    3.044407] systemd[1]: Hostname set to <leonardo>.
[    3.317318] systemd[1]: bpf-lsm: LSM BPF program attached
[    3.317719] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'systemd'
[    3.518314] systemd[1]: /etc/systemd/system/rustdesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rustdesk.pid → /run/rustdesk.pid; please update the unit file accordingly.
[    3.520011] systemd[1]: Queued start job for default target Graphical Interface.
[    3.554202] systemd[1]: Created slice Slice /system/getty.
[    3.555604] systemd[1]: Created slice Slice /system/modprobe.
[    3.556854] systemd[1]: Created slice Slice /system/rethinkdb.
[    3.558085] systemd[1]: Created slice Slice /system/systemd-fsck.
[    3.559118] systemd[1]: Created slice User and Session Slice.
[    3.559625] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.560086] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.560917] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.561302] systemd[1]: Reached target Local Encrypted Volumes.
[    3.561567] systemd[1]: Reached target Login Prompts.
[    3.561813] systemd[1]: Reached target Local Integrity Protected Volumes.
[    3.562108] systemd[1]: Reached target Remote File Systems.
[    3.562345] systemd[1]: Reached target Slice Units.
[    3.562616] systemd[1]: Reached target Local Verity Protected Volumes.
[    3.563081] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.563901] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.567358] systemd[1]: Listening on Process Core Dump Socket.
[    3.568165] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.568899] systemd[1]: Listening on Journal Socket.
[    3.569798] systemd[1]: Listening on udev Control Socket.
[    3.570417] systemd[1]: Listening on udev Kernel Socket.
[    3.573533] systemd[1]: Mounting Huge Pages File System...
[    3.576408] systemd[1]: Mounting POSIX Message Queue File System...
[    3.578621] systemd[1]: Mounting Kernel Debug File System...
[    3.580859] systemd[1]: Mounting Kernel Trace File System...
[    3.582797] systemd[1]: Starting Create List of Static Device Nodes...
[    3.584353] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.586174] systemd[1]: Starting Load Kernel Module configfs...
[    3.587664] systemd[1]: Starting Load Kernel Module dm_mod...
[    3.589132] systemd[1]: Starting Load Kernel Module drm...
[    3.590692] systemd[1]: Starting Load Kernel Module fuse...
[    3.592084] systemd[1]: Starting Load Kernel Module loop...
[    3.592299] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    3.594381] systemd[1]: Starting Journal Service...
[    3.596105] systemd[1]: Starting Load Kernel Modules...
[    3.596248] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[    3.597206] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.598294] systemd[1]: Starting Coldplug All udev Devices...
[    3.600363] loop: module loaded
[    3.603162] systemd[1]: Mounted Huge Pages File System.
[    3.610261] device-mapper: uevent: version 1.0.3
[    3.610428] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    3.614298] systemd-journald[184]: Collecting audit messages is disabled.
[    3.614742] EXT4-fs (nvme0n1p3): re-mounted abdb92fd-375b-4517-919e-e174070c2c02 r/w. Quota mode: none.
[    3.617333] fuse: init (API version 7.38)
[    3.620545] systemd[1]: Mounted POSIX Message Queue File System.
[    3.621464] systemd[1]: Mounted Kernel Debug File System.
[    3.621672] systemd[1]: Mounted Kernel Trace File System.
[    3.641012] systemd[1]: Finished Create List of Static Device Nodes.
[    3.641515] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    3.648816] vboxdrv: loading out-of-tree module taints kernel.
[    3.648821] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    3.664405] vboxdrv: Found 4 processor cores/threads
[    3.668025] systemd[1]: Finished Load Kernel Module configfs.
[    3.668245] systemd[1]: Started Journal Service.
[    3.687691] vboxdrv: TSC mode is Invariant, tentative frequency 2303998606 Hz
[    3.687693] vboxdrv: Successfully loaded version 7.0.8 r156879 (interface 0x00330004)
[    3.691163] VBoxNetAdp: Successfully started.
[    3.696521] VBoxNetFlt: Successfully started.
[    3.837349] systemd-journald[184]: Received client request to flush runtime journal.
[    3.864919] systemd-journald[184]: /var/log/journal/d47472ac809b49c8924bc470b5e92090/system.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[    3.864925] systemd-journald[184]: Rotating system journal.
[    4.026182] loop0: detected capacity change from 0 to 203488
[    4.029348] loop1: detected capacity change from 0 to 203520
[    4.040043] loop2: detected capacity change from 0 to 113504
[    4.041624] loop3: detected capacity change from 0 to 113544
[    4.046698] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.052080] loop4: detected capacity change from 0 to 280
[    4.055565] loop6: detected capacity change from 0 to 133320
[    4.055900] loop5: detected capacity change from 0 to 66104
[    4.059829] loop7: detected capacity change from 0 to 66120
[    4.214986] Adding 7863292k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:7863292k SSFS
[    4.246453] Consider using thermal netlink events interface
[    4.275620] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20230331/nspredef-260)
[    4.275631] _ART package 0 is invalid, ignored
[    4.275640] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20230331/nsprepkg-94)
[    4.330496] acpi INT33D5:00: intel-hid: created platform device
[    4.350081] input: Intel HID events as /devices/platform/INT33D5:00/input/input8
[    4.369173] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.375074] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    4.385086] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    4.411865] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    4.412183] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    4.451257] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    4.465182] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.465511] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.466408] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.466412] cfg80211: failed to load regulatory.db
[    4.467331] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    4.467349] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    4.467404] pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000
[    4.467471] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]
[    4.469186] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[    4.687112] input: DLL06E5:01 06CB:7A13 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL06E5:01/0018:06CB:7A13.0001/input/input11
[    4.687164] input: DLL06E5:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL06E5:01/0018:06CB:7A13.0001/input/input12
[    4.687454] hid-generic 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL06E5:01 06CB:7A13] on i2c-DLL06E5:01
[    4.889730] i2c i2c-8: 1/2 memory slots populated (from DMI)
[    4.890122] i2c i2c-8: Successfully instantiated SPD at 0x50
[    4.906629] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    4.911983] input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input14
[    4.920900] intel_rapl_common: Found RAPL domain package
[    4.920903] intel_rapl_common: Found RAPL domain core
[    4.920904] intel_rapl_common: Found RAPL domain uncore
[    4.920905] intel_rapl_common: Found RAPL domain dram
[    4.944877] intel_rapl_common: Found RAPL domain package
[    4.944881] intel_rapl_common: Found RAPL domain dram
[    4.945563] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    4.945566] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.945567] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.945568] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.945569] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.960024] cryptd: max_cpu_qlen set to 1000
[    4.960162] iTCO_vendor_support: vendor-support=0
[    4.961144] Intel(R) Wireless WiFi driver for Linux
[    4.964192] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[    4.965271] iwlwifi 0000:02:00.0: Detected crf-id 0xbadcafe, cnv-id 0x3000000 wfpm id 0x80000000
[    4.965327] iwlwifi 0000:02:00.0: PCI dev 24f3/0050, rev=0x201, rfid=0xd55555d5
[    4.981603] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    4.985182] ee1004 8-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    4.987788] iwlwifi 0000:02:00.0: loaded firmware version 36.ca7b901d.0 8000C-36.ucode op_mode iwlmvm
[    4.990161] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.018657] AVX2 version of gcm_enc/dec engaged.
[    5.018695] AES CTR mode by8 optimization enabled
[    5.050888] dell_laptop: Using i8042 filter function for receiving events
[    5.111201] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    5.111257] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.118466] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.145666] input: DLL06E5:01 06CB:7A13 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL06E5:01/0018:06CB:7A13.0001/input/input15
[    5.145752] input: DLL06E5:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL06E5:01/0018:06CB:7A13.0001/input/input16
[    5.145928] hid-multitouch 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL06E5:01 06CB:7A13] on i2c-DLL06E5:01
[    5.171404] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x201
[    5.171478] thermal thermal_zone10: failed to read out thermal zone (-61)
[    5.174189] mousedev: PS/2 mouse device common for all mice
[    5.195688] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    5.195693] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.195696] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    5.195698] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.195699] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.195701] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x18
[    5.195702] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[    5.195704] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    5.255634] iwlwifi 0000:02:00.0: base HW address: 44:85:00:0d:f3:ef, OTP minor version: 0x0
[    5.330208] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    5.330257] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    5.330299] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    5.330339] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    5.333875] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.346478] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    5.370059] intel_tcc_cooling: Programmable TCC Offset detected
[    5.799467] loop8: detected capacity change from 0 to 8
[    5.916876] mc: Linux media interface: v0.10
[    5.980111] Bluetooth: Core ver 2.22
[    5.980135] NET: Registered PF_BLUETOOTH protocol family
[    5.980137] Bluetooth: HCI device and connection manager initialized
[    5.980141] Bluetooth: HCI socket layer initialized
[    5.980143] Bluetooth: L2CAP socket layer initialized
[    5.980146] Bluetooth: SCO socket layer initialized
[    6.016094] videodev: Linux video capture interface: v2.00
[    6.168354] usbcore: registered new interface driver btusb
[    6.169159] Bluetooth: hci0: Firmware revision 0.0 build 14 week 44 2021
[    6.172153] Bluetooth: hci0: Reading supported features failed (-16)
[    6.173299] Bluetooth: hci0: Error reading debug features
[    6.231817] usb 1-12: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:2b95)
[    6.252675] usbcore: registered new interface driver uvcvideo
[    6.298256] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.298261] Bluetooth: BNEP filters: protocol multicast
[    6.298265] Bluetooth: BNEP socket layer initialized
[    6.301694] Bluetooth: MGMT ver 1.22
[    6.310298] NET: Registered PF_ALG protocol family
[    6.551865] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[   10.393474] wlp2s0: authenticate with 82:cb:bc:38:60:18
[   10.393487] wlp2s0: 80 MHz not supported, disabling VHT
[   10.398472] wlp2s0: send auth to 82:cb:bc:38:60:18 (try 1/3)
[   10.422195] wlp2s0: authenticated
[   10.424171] wlp2s0: associate with 82:cb:bc:38:60:18 (try 1/3)
[   10.430110] wlp2s0: RX AssocResp from 82:cb:bc:38:60:18 (capab=0x411 status=0 aid=1)
[   10.433518] wlp2s0: associated
[   10.561195] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   10.572020] nvidia: module license 'NVIDIA' taints kernel.
[   10.572024] Disabling lock debugging due to kernel taint
[   10.572028] nvidia: module license taints kernel.
[   11.130153] nvidia-nvlink: Nvlink Core is being initialized, major device number 510

[   12.397907] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[   12.514829] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  535.54.03  Tue Jun  6 22:20:39 UTC 2023
[   12.800317] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20230331/nsarguments-61)
[   15.070566] rfkill: input handler disabled
[   15.132130] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[   15.362009] nvidia-uvm: Loaded the UVM driver, major device number 508.
[   15.477638] Bluetooth: RFCOMM TTY layer initialized
[   15.477647] Bluetooth: RFCOMM socket layer initialized
[   15.477651] Bluetooth: RFCOMM ver 1.11
[   22.963375] systemd-journald[184]: /var/log/journal/d47472ac809b49c8924bc470b5e92090/user-1000.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[   23.514396] rfkill: input handler enabled
[   25.597452] Bluetooth: hci0: command 0x0408 tx timeout
[   25.597459] Bluetooth: hci0: Opcode 0x c24 failed: -110
[   28.257549] warning: `pool' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[   28.513340] rfkill: input handler disabled

I guess I can live without bumblebee!

Thanks a lot for your assistance.

seth · 2023-07-09 17:15:09

If this is de-facto a single user system, you might try to live without GDM and start a (locked) session for your user directly?

ybon · 2023-07-10 04:20:10

seth wrote:

If this is de-facto a single user system

It is.

seth wrote:

you might try to live without GDM and start a (locked) session for your user directly?

I don't think I have the whole picture in mind, and thus I'm not sure to understand the consequences (a part from the login screen I guess). But I can try! Should I just disable `gdm.service` and see how it goes ?

seth · 2023-07-10 06:44:15

Disabling GDM will boot you into a console only which is a mandatory, but only first step for this approach.
Then see:
https://wiki.archlinux.org/title/GNOME#Manually ("add", see the last link below for a proper xinitrc wna which parts must be there)
https://wiki.archlinux.org/title/Start_X_at_login
https://wiki.archlinux.org/title/Getty# … al_console

fabh2o · 2023-07-26 14:20:37

I had the same error, but no bubmlebee installed. Looking around I found this email: https://lore.kernel.org/lkml/2023070522 … helgaas/T/
I had previously loaded the module vfio-pci (along others) because I was trying to get GPU passtrough to work. I had a file in /etc/modules-load.d/ with all the modules required for the passtrough. Deleting this file fixed my issue.
File content:

# Modules to load at boot
# To use nvidia passthrough
vfio
vfio_iommu_type1
vfio_pci
kvm
kvm_intel
kvmgt
xengt
vfio-mdev

hlavki · 2023-08-12 06:47:19

Kernel bug for this problem: https://bugzilla.kernel.org/show_bug.cgi?id=217705

j4v3l · 2023-12-10 06:58:51

I discovered a workaround rather than a definitive solution. By including the parameter 'pcie_port_pm=off' in the boot arguments, I was able to address the issue I was having similar to yours.

seth · 2023-12-10 09:28:01

ybon wrote:

[ 0.228220] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it

Arch Linux

#1 2023-07-05 07:14:08

pci Unable to change power state from D3cold to D0

#2 2023-07-05 08:58:26

Re: pci Unable to change power state from D3cold to D0

#3 2023-07-05 19:19:19

Re: pci Unable to change power state from D3cold to D0

#4 2023-07-05 19:51:45

Re: pci Unable to change power state from D3cold to D0

#5 2023-07-07 05:02:24

Re: pci Unable to change power state from D3cold to D0

#6 2023-07-07 06:52:35

Re: pci Unable to change power state from D3cold to D0

#7 2023-07-08 17:37:07

Re: pci Unable to change power state from D3cold to D0

#8 2023-07-08 18:26:05

Re: pci Unable to change power state from D3cold to D0

#9 2023-07-09 14:20:40

Re: pci Unable to change power state from D3cold to D0

#10 2023-07-09 17:15:09

Re: pci Unable to change power state from D3cold to D0

#11 2023-07-10 04:20:10

Re: pci Unable to change power state from D3cold to D0

#12 2023-07-10 06:44:15

Re: pci Unable to change power state from D3cold to D0

#13 2023-07-26 14:20:37

Re: pci Unable to change power state from D3cold to D0

#14 2023-08-12 06:47:19

Re: pci Unable to change power state from D3cold to D0

#15 2023-12-10 06:58:51

Re: pci Unable to change power state from D3cold to D0

#16 2023-12-10 09:28:01

Re: pci Unable to change power state from D3cold to D0

Board footer