Arch Linux

RedStarITA

Member

Registered: 2023-07-21

Posts: 1

Cannot run pwmconfig (There are no pwm-capable sensor modules installe

Hi, I'm trying to control the fan speed in my Laptop(Victus 15-fa0xxxnl. I've already installed lm_sensors and run

sudo sensor detect

. However, everytime i try to run

sudo pwnconfig

i get this output:

# pwmconfig version 3.6.0+git
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

/usr/bin/pwmconfig: There are no pwm-capable sensor modules installed

and, the output for when i do

sensors

is:

p-isa-0000
Adapter: ISA adapter
fan1:        2588 RPM
fan2:        2417 RPM

BAT0-acpi-0
Adapter: ACPI interface
in0:          17.25 V  

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +37.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +29.0°C  (high = +100.0°C, crit = +100.0°C)
Core 4:        +34.0°C  (high = +100.0°C, crit = +100.0°C)
Core 8:        +33.0°C  (high = +100.0°C, crit = +100.0°C)
Core 12:       +31.0°C  (high = +100.0°C, crit = +100.0°C)
Core 16:       +32.0°C  (high = +100.0°C, crit = +100.0°C)
Core 17:       +33.0°C  (high = +100.0°C, crit = +100.0°C)
Core 18:       +33.0°C  (high = +100.0°C, crit = +100.0°C)
Core 19:       +33.0°C  (high = +100.0°C, crit = +100.0°C)
Core 20:       +34.0°C  (high = +100.0°C, crit = +100.0°C)
Core 21:       +34.0°C  (high = +100.0°C, crit = +100.0°C)
Core 22:       +34.0°C  (high = +100.0°C, crit = +100.0°C)
Core 23:       +34.0°C  (high = +100.0°C, crit = +100.0°C)

nvme-pci-0200
Adapter: PCI adapter
Composite:    +32.9°C  (low  =  -0.1°C, high = +79.8°C)
                       (crit = +81.8°C)
Sensor 1:     +32.9°C  (low  = -273.1°C, high = +65261.8°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +38.0°C