You are not logged in.
- Topics: Active | Unanswered
#1 2023-07-22 21:19:01
- soaliar
- Member
- Registered: 2009-08-06
- Posts: 36
[Solved]Integrated monitor only working at 144hz when using LTS kernel
Integrated monitor only working at 144hz when using LTS kernel
It used to work fine some months ago, but after a recent upgrade only the LTS kernel allows me to use the integrated monitor at 144hz. Using zen or regular kernel shows 60hz when trying to modify it from KDE settings.
My laptop is an ASUS ROG Strix Hero II with an Nvidia RTX 2060.
Using proprietary Nvidia (nvidia-dkms), everything is up to date.
These are my xrandr outputs (I have two displays connected, disregard HDMI-0):
Booting on LTS kernel:
[abigail@abigail-pc ~]$ xrandr
Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm
1920x1080 60.00*+ 59.94 50.00 29.97 25.00 23.98
1680x1050 59.95
1440x900 74.98 59.89
1360x768 60.02
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 59.94 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 72.81 59.94
eDP-1-1 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 344mm x 194mm
1920x1080 144.03*+ 60.08 60.01 59.97 59.96 59.93
1680x1050 59.95 59.88
1400x1050 74.76 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 85.02 75.02 60.02
1400x900 59.96 59.88
1280x960 85.00 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1152x864 75.00
1280x720 60.00 59.99 59.86 59.74
1024x768 85.00 75.05 60.04 85.00 75.03 70.07 60.00
1024x768i 86.96
960x720 85.00 75.00 60.00
928x696 75.00 60.05
896x672 75.05 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
832x624 74.55
960x540 59.96 59.99 59.63 59.82
800x600 85.00 75.00 70.00 65.00 60.00 85.14 72.19 75.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 74.76 59.98
800x450 59.95 59.82
640x512 85.02 75.02 60.02
700x450 59.96 59.88
640x480 85.09 60.00 85.01 72.81 75.00 59.94
720x405 59.51 58.99
720x400 85.04
684x384 59.88 59.85
640x400 59.88 59.98 85.08
576x432 75.00
640x360 59.86 59.83 59.84 59.32
640x350 85.08
512x384 85.00 75.03 70.07 60.00
512x384i 87.06
512x288 60.00 59.92
416x312 74.66
480x270 59.63 59.82
400x300 85.27 72.19 75.12 60.32 56.34
432x243 59.92 59.57
320x240 85.18 72.81 75.00 60.05
360x202 59.51 59.13
360x200 85.04
320x200 85.27
320x180 59.84 59.32
320x175 85.27
1680x1050 (0x1c5) 146.250MHz -HSync +VSync
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.29KHz
v: height 1050 start 1053 end 1059 total 1089 clock 59.95Hz
1280x1024 (0x1c9) 135.000MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 79.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.02Hz
1280x1024 (0x1ca) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1280x960 (0x1cb) 108.000MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.00KHz
v: height 960 start 961 end 964 total 1000 clock 60.00Hz
1280x800 (0x1cc) 83.500MHz -HSync +VSync
h: width 1280 start 1352 end 1480 total 1680 skew 0 clock 49.70KHz
v: height 800 start 803 end 809 total 831 clock 59.81Hz
1152x864 (0x1d0) 108.000MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.50KHz
v: height 864 start 865 end 868 total 900 clock 75.00Hz
1024x768 (0x1d1) 78.750MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.02KHz
v: height 768 start 769 end 772 total 800 clock 75.03Hz
1024x768 (0x1d2) 75.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.48KHz
v: height 768 start 771 end 777 total 806 clock 70.07Hz
1024x768 (0x1d3) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
800x600 (0x1d5) 50.000MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.08KHz
v: height 600 start 637 end 643 total 666 clock 72.19Hz
800x600 (0x1d4) 49.500MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.88KHz
v: height 600 start 601 end 604 total 625 clock 75.00Hz
800x600 (0x1d6) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0x1d7) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
640x480 (0x1da) 31.500MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.50KHz
v: height 480 start 481 end 484 total 500 clock 75.00Hz
640x480 (0x1dc) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94HzBooting on regular kernel:
[abigail@abigail-pc ~]$ xrandr
Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm
1920x1080 60.00*+ 59.94 50.00 29.97 25.00 23.98
1680x1050 59.95
1440x900 74.98 59.89
1360x768 60.02
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 59.94 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 72.81 59.94
eDP-1-1 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 344mm x 194mm
15360x8640 15.83 28.85
7680x4320 15.83 59.99 59.99 59.99
5120x2880 59.99 59.99
4096x2304 59.99 59.98
3840x2160 60.00 60.01 59.98 59.97
3200x1800 59.96 59.94
2880x1620 59.96 59.97
2560x1600 59.99 59.97
2560x1440 59.99 59.99 59.96 59.95
2048x1536 60.00
1920x1440 60.00
1856x1392 60.01
1792x1344 60.01
2048x1152 59.99 59.98 59.90 59.91
1920x1200 59.88 59.95
1920x1080 60.01* 59.97 59.96 59.93
1600x1200 60.00
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 59.98
800x450 59.95 59.82
640x512 60.02
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
640x400 59.88 59.98
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
1680x1050 (0x1c5) 146.250MHz -HSync +VSync
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.29KHz
v: height 1050 start 1053 end 1059 total 1089 clock 59.95Hz
1280x1024 (0x1ca) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1280x960 (0x1cb) 108.000MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.00KHz
v: height 960 start 961 end 964 total 1000 clock 60.00Hz
1280x800 (0x1cc) 83.500MHz -HSync +VSync
h: width 1280 start 1352 end 1480 total 1680 skew 0 clock 49.70KHz
v: height 800 start 803 end 809 total 831 clock 59.81Hz
1024x768 (0x1d3) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
800x600 (0x1d6) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0x1d7) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
640x480 (0x1dc) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94HzNotice how when booting on regular kernel it adds a ton of (unsupported) higher resolutions to my integrated display. But still, the only available refresh rate is 60hz.
From what I've tested the only difference is the kernel version. LTS seems to handle everything just fine, regular and zen have the exact same issues.
Thanks.
Last edited by soaliar (2023-07-23 16:14:43)
Offline
#2 2023-07-22 21:36:37
- seth
- Member
- Registered: 2012-09-03
- Posts: 66,122
Re: [Solved]Integrated monitor only working at 144hz when using LTS kernel
Please post an xorg log from either kernel runs, https://wiki.archlinux.org/title/Xorg#General
Online
#3 2023-07-22 23:25:01
- soaliar
- Member
- Registered: 2009-08-06
- Posts: 36
Re: [Solved]Integrated monitor only working at 144hz when using LTS kernel
LTS Kernel
[ 6.825] (--) Log file renamed from "/var/log/Xorg.pid-781.log" to "/var/log/Xorg.0.log"
[ 6.829]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 6.829] Current Operating System: Linux abigail-pc 6.1.39-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 17:58:31 +0000 x86_64
[ 6.829] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=0d53bca8-e20e-435e-897d-02f62aa7231c rw resume=UUID=6d3036ed-f7c0-4d3a-8097-6b0625f71acc loglevel=3 nowatchdog nvme_load=YES nvidia-drm.modeset=1
[ 6.829]
[ 6.829] Current version of pixman: 0.42.2
[ 6.829] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.829] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.829] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 22 20:12:05 2023
[ 6.832] (==) Using config file: "/etc/X11/xorg.conf"
[ 6.832] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6.832] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.834] (==) No Layout section. Using the first Screen section.
[ 6.834] (==) No screen section available. Using defaults.
[ 6.834] (**) |-->Screen "Default Screen Section" (0)
[ 6.834] (**) | |-->Monitor "<default monitor>"
[ 6.835] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 6.835] (**) | |-->Device "nvidia"
[ 6.835] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 6.835] (==) Automatically adding devices
[ 6.835] (==) Automatically enabling devices
[ 6.835] (==) Automatically adding GPU devices
[ 6.835] (==) Automatically binding GPU devices
[ 6.835] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 6.836] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 6.836] Entry deleted from font path.
[ 6.836] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 6.836] Entry deleted from font path.
[ 6.836] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 6.836] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 6.836] Entry deleted from font path.
[ 6.836] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 6.836] Entry deleted from font path.
[ 6.836] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 6.836] Entry deleted from font path.
[ 6.836] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 6.836] Entry deleted from font path.
[ 6.836] (==) FontPath set to:
[ 6.836] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.836] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6.836] (II) Module ABI versions:
[ 6.836] X.Org ANSI C Emulation: 0.4
[ 6.836] X.Org Video Driver: 25.2
[ 6.836] X.Org XInput driver : 24.4
[ 6.836] X.Org Server Extension : 10.0
[ 6.838] (++) using VT number 2
[ 6.838] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 6.841] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 6.841] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[ 6.870] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.870] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 6.875] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 6.877] (--) PCI:*(0@0:2:0) 8086:3e9b:1043:1711 rev 0, Mem @ 0xa3000000/16777216, 0x80000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[ 6.877] (--) PCI: (1@0:0:0) 10de:1f11:1043:1f8e rev 161, Mem @ 0xa4000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 6.877] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6.877] (II) "glx" will be loaded by default.
[ 6.877] (II) LoadModule: "modesetting"
[ 6.880] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 6.884] (II) Module modesetting: vendor="X.Org Foundation"
[ 6.884] compiled for 1.21.1.8, module version = 1.21.1
[ 6.884] Module class: X.Org Video Driver
[ 6.884] ABI class: X.Org Video Driver, version 25.2
[ 6.884] (II) LoadModule: "glx"
[ 6.884] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.893] (II) Module glx: vendor="X.Org Foundation"
[ 6.893] compiled for 1.21.1.8, module version = 1.0.0
[ 6.893] ABI class: X.Org Server Extension, version 10.0
[ 6.893] (II) LoadModule: "nvidia"
[ 6.893] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 6.900] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 6.900] compiled for 1.6.99.901, module version = 1.0.0
[ 6.900] Module class: X.Org Video Driver
[ 6.900] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 6.900] (II) NVIDIA dlloader X Driver 535.86.05 Fri Jul 14 20:26:08 UTC 2023
[ 6.900] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 6.903] (WW) Falling back to old probe method for modesetting
[ 6.904] (II) Loading sub module "fb"
[ 6.904] (II) LoadModule: "fb"
[ 6.904] (II) Module "fb" already built-in
[ 6.904] (II) Loading sub module "wfb"
[ 6.904] (II) LoadModule: "wfb"
[ 6.904] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6.905] (II) Module wfb: vendor="X.Org Foundation"
[ 6.905] compiled for 1.21.1.8, module version = 1.0.0
[ 6.905] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.909] (II) modeset(G0): using drv /dev/dri/card0
[ 6.909] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 6.909] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 6.909] (==) NVIDIA(0): RGB weight 888
[ 6.909] (==) NVIDIA(0): Default visual is TrueColor
[ 6.909] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6.909] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 6.909] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 6.909] (**) NVIDIA(0): Enabling 2D acceleration
[ 6.909] (II) Loading sub module "glxserver_nvidia"
[ 6.909] (II) LoadModule: "glxserver_nvidia"
[ 6.909] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 6.995] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 6.995] compiled for 1.6.99.901, module version = 1.0.0
[ 6.995] Module class: X.Org Server Extension
[ 6.995] (II) NVIDIA GLX Module 535.86.05 Fri Jul 14 20:27:17 UTC 2023
[ 6.996] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 6.998] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 6.998] (--) NVIDIA(0): DFP-0
[ 6.998] (--) NVIDIA(0): DFP-1
[ 6.998] (--) NVIDIA(0): DFP-2 (boot)
[ 7.007] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 2060 (TU106-A) at PCI:1:0:0
[ 7.007] (II) NVIDIA(0): (GPU-0)
[ 7.007] (--) NVIDIA(0): Memory: 6291456 kBytes
[ 7.007] (--) NVIDIA(0): VideoBIOS: 90.06.2d.00.d3
[ 7.007] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 7.007] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 7.007] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 7.007] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 7.007] (--) NVIDIA(GPU-0):
[ 7.008] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 7.008] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 7.008] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 7.008] (--) NVIDIA(GPU-0):
[ 7.052] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 7.052] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 7.052] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 7.052] (--) NVIDIA(GPU-0):
[ 7.105] (==) NVIDIA(0):
[ 7.105] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 7.105] (==) NVIDIA(0): will be used as the requested mode.
[ 7.105] (==) NVIDIA(0):
[ 7.110] (II) NVIDIA(0): Validated MetaModes:
[ 7.110] (II) NVIDIA(0): "DFP-2:nvidia-auto-select"
[ 7.110] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 7.278] (--) NVIDIA(0): DPI set to (81, 80); computed from "UseEdidDpi" X config
[ 7.278] (--) NVIDIA(0): option
[ 7.278] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 7.278] (==) modeset(G0): RGB weight 888
[ 7.278] (==) modeset(G0): Default visual is TrueColor
[ 7.278] (II) Loading sub module "glamoregl"
[ 7.278] (II) LoadModule: "glamoregl"
[ 7.278] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 7.285] (II) Module glamoregl: vendor="X.Org Foundation"
[ 7.285] compiled for 1.21.1.8, module version = 1.0.1
[ 7.285] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.819] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics 630 (CFL GT2)
[ 7.819] (II) modeset(G0): glamor initialized
[ 7.821] (II) modeset(G0): Output eDP-1-1 has no monitor section
[ 7.822] (II) modeset(G0): EDID for output eDP-1-1
[ 7.822] (II) modeset(G0): Manufacturer: AUO Model: 82ed Serial#: 0
[ 7.822] (II) modeset(G0): Year: 2018 Week: 10
[ 7.822] (II) modeset(G0): EDID Version: 1.4
[ 7.822] (II) modeset(G0): Digital Display Input
[ 7.822] (II) modeset(G0): 8 bits per channel
[ 7.822] (II) modeset(G0): Digital interface is DisplayPort
[ 7.822] (II) modeset(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 7.822] (II) modeset(G0): Gamma: 2.20
[ 7.822] (II) modeset(G0): No DPMS capabilities specified
[ 7.822] (II) modeset(G0): Supported color encodings: RGB 4:4:4
[ 7.822] (II) modeset(G0): First detailed timing is preferred mode
[ 7.822] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[ 7.822] (II) modeset(G0): redX: 0.642 redY: 0.338 greenX: 0.322 greenY: 0.611
[ 7.822] (II) modeset(G0): blueX: 0.153 blueY: 0.046 whiteX: 0.313 whiteY: 0.329
[ 7.822] (II) modeset(G0): Manufacturer's mask: 0
[ 7.822] (II) modeset(G0): Supported detailed timing:
[ 7.822] (II) modeset(G0): clock: 368.1 MHz Image Size: 344 x 194 mm
[ 7.822] (II) modeset(G0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2102 h_border: 0
[ 7.822] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1095 v_blanking: 1216 v_border: 0
[ 7.822] (II) modeset(G0): Supported detailed timing:
[ 7.822] (II) modeset(G0): clock: 368.1 MHz Image Size: 344 x 193 mm
[ 7.822] (II) modeset(G0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2102 h_border: 0
[ 7.822] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1095 v_blanking: 2915 v_border: 0
[ 7.822] (II) modeset(G0): AUO
[ 7.822] (II) modeset(G0): B156HAN08.2
[ 7.822] (II) modeset(G0): EDID (in hex):
[ 7.822] (II) modeset(G0): 00ffffffffffff0006afed8200000000
[ 7.822] (II) modeset(G0): 0a1c0104a5221378026a75a456529c27
[ 7.822] (II) modeset(G0): 0b505400000001010101010101010101
[ 7.822] (II) modeset(G0): 010101010101ce8f80b6703888403020
[ 7.822] (II) modeset(G0): a50058c210000000ce8f80b670382b47
[ 7.822] (II) modeset(G0): 3020a50058c110000000000000fe0041
[ 7.822] (II) modeset(G0): 554f0a202020202020202020000000fe
[ 7.822] (II) modeset(G0): 004231353648414e30382e32200a0017
[ 7.823] (II) modeset(G0): Printing probed modes for output eDP-1-1
[ 7.823] (II) modeset(G0): Modeline "1920x1080"x144.0 368.14 1920 1968 2000 2102 1080 1090 1095 1216 -hsync -vsync (175.1 kHz eP)
[ 7.823] (II) modeset(G0): Modeline "1920x1080"x60.1 368.14 1920 1968 2000 2102 1080 1090 1095 2915 -hsync -vsync (175.1 kHz e)
[ 7.823] (II) modeset(G0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x768"x170.0 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync (137.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x768"x150.1 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x768i"x43.5 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "960x720"x170.0 170.68 960 1036 1144 1328 720 720 722 756 doublescan -hsync +vsync (128.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "960x720"x150.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "928x696"x150.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 7.823] (II) modeset(G0): Modeline "896x672"x150.1 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 7.823] (II) modeset(G0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 7.823] (II) modeset(G0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 7.823] (II) modeset(G0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x600"x170.0 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x600"x150.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x600"x140.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x600"x130.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 7.823] (II) modeset(G0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 7.823] (II) modeset(G0): Modeline "700x525"x149.5 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x512"x170.0 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x512"x150.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x480"x170.2 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 7.823] (II) modeset(G0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 7.823] (II) modeset(G0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "576x432"x150.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 7.823] (II) modeset(G0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "512x384"x170.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "512x384"x150.1 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 7.823] (II) modeset(G0): Modeline "512x384"x140.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 7.823] (II) modeset(G0): Modeline "512x384i"x87.1 22.45 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "416x312"x149.3 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "400x300"x170.5 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "400x300"x144.4 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 7.823] (II) modeset(G0): Modeline "400x300"x150.2 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 7.823] (II) modeset(G0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 7.823] (II) modeset(G0): Modeline "320x240"x170.4 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz d)
[ 7.823] (II) modeset(G0): Modeline "320x240"x145.6 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "320x240"x150.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 7.823] (II) modeset(G0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 7.823] (II) modeset(G0): Modeline "360x200"x170.1 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "320x200"x170.5 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz d)
[ 7.823] (II) modeset(G0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 7.823] (II) modeset(G0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 7.823] (II) modeset(G0): Modeline "320x175"x170.5 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz d)
[ 7.823] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 7.823] (==) modeset(G0): DPI set to (96, 96)
[ 7.823] (II) Loading sub module "fb"
[ 7.823] (II) LoadModule: "fb"
[ 7.823] (II) Module "fb" already built-in
[ 7.823] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 7.823] (II) NVIDIA: access.
[ 7.831] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 7.831] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 7.832] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 7.832] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 7.832] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 7.832] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 7.832] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 7.832] (II) NVIDIA(0): Config Options in the README.
[ 7.849] (II) NVIDIA(0): Setting mode "DFP-2:nvidia-auto-select"
[ 7.935] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 7.935] (==) NVIDIA(0): Backing store enabled
[ 7.935] (==) NVIDIA(0): Silken mouse enabled
[ 7.935] (==) NVIDIA(0): DPMS enabled
[ 7.935] (II) Loading sub module "dri2"
[ 7.935] (II) LoadModule: "dri2"
[ 7.935] (II) Module "dri2" already built-in
[ 7.935] (II) NVIDIA(0): [DRI2] Setup complete
[ 7.935] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 7.962] (==) modeset(G0): Backing store enabled
[ 7.962] (==) modeset(G0): Silken mouse enabled
[ 7.992] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 7.992] (==) modeset(G0): DPMS enabled
[ 7.992] (II) modeset(G0): [DRI2] Setup complete
[ 7.992] (II) modeset(G0): [DRI2] DRI driver: iris
[ 7.992] (II) modeset(G0): [DRI2] VDPAU driver: va_gl
[ 7.992] (II) modeset(G0): Disable reverse prime offload mode for i915.
[ 7.992] (II) Initializing extension Generic Event Extension
[ 7.992] (II) Initializing extension SHAPE
[ 7.993] (II) Initializing extension MIT-SHM
[ 7.993] (II) Initializing extension XInputExtension
[ 7.993] (II) Initializing extension XTEST
[ 7.993] (II) Initializing extension BIG-REQUESTS
[ 7.993] (II) Initializing extension SYNC
[ 7.994] (II) Initializing extension XKEYBOARD
[ 7.994] (II) Initializing extension XC-MISC
[ 7.994] (II) Initializing extension SECURITY
[ 7.994] (II) Initializing extension XFIXES
[ 7.994] (II) Initializing extension RENDER
[ 7.994] (II) Initializing extension RANDR
[ 7.995] (II) Initializing extension COMPOSITE
[ 7.995] (II) Initializing extension DAMAGE
[ 7.995] (II) Initializing extension MIT-SCREEN-SAVER
[ 7.995] (II) Initializing extension DOUBLE-BUFFER
[ 7.995] (II) Initializing extension RECORD
[ 7.995] (II) Initializing extension DPMS
[ 7.995] (II) Initializing extension Present
[ 7.995] (II) Initializing extension DRI3
[ 7.996] (II) Initializing extension X-Resource
[ 7.996] (II) Initializing extension XVideo
[ 7.996] (II) Initializing extension XVideo-MotionCompensation
[ 7.996] (II) Initializing extension GLX
[ 7.996] (II) Initializing extension GLX
[ 7.996] (II) Indirect GLX disabled.
[ 7.997] (II) GLX: Another vendor is already registered for screen 0
[ 7.997] (II) Initializing extension XFree86-VidModeExtension
[ 7.997] (II) Initializing extension XFree86-DGA
[ 7.997] (II) Initializing extension XFree86-DRI
[ 7.997] (II) Initializing extension DRI2
[ 7.997] (II) Initializing extension NV-GLX
[ 7.997] (II) Initializing extension NV-CONTROL
[ 7.997] (II) Initializing extension XINERAMA
[ 8.265] (II) modeset(G0): Damage tracking initialized
[ 8.427] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 8.427] (**) Power Button: Applying InputClass "devname"
[ 8.427] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.427] (**) Power Button: Applying InputClass "system-keyboard"
[ 8.427] (II) LoadModule: "libinput"
[ 8.427] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 8.431] (II) Module libinput: vendor="X.Org Foundation"
[ 8.431] compiled for 1.21.1.8, module version = 1.3.0
[ 8.431] Module class: X.Org XInput Driver
[ 8.431] ABI class: X.Org XInput driver, version 24.4
[ 8.431] (II) Using input driver 'libinput' for 'Power Button'
[ 8.431] (**) Power Button: always reports core events
[ 8.431] (**) Option "Device" "/dev/input/event3"
[ 8.440] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 8.440] (II) event3 - Power Button: device is a keyboard
[ 8.440] (II) event3 - Power Button: device removed
[ 8.456] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 8.456] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8.456] (**) Option "xkb_layout" "es"
[ 8.471] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 8.471] (II) event3 - Power Button: device is a keyboard
[ 8.471] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event5)
[ 8.471] (**) Asus Wireless Radio Control: Applying InputClass "devname"
[ 8.471] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 8.471] (**) Asus Wireless Radio Control: Applying InputClass "system-keyboard"
[ 8.471] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 8.471] (**) Asus Wireless Radio Control: always reports core events
[ 8.471] (**) Option "Device" "/dev/input/event5"
[ 8.472] (II) event5 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 8.472] (II) event5 - Asus Wireless Radio Control: device is a keyboard
[ 8.473] (II) event5 - Asus Wireless Radio Control: device removed
[ 8.586] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5/event5"
[ 8.586] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 8.586] (**) Option "xkb_layout" "es"
[ 8.587] (II) event5 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 8.587] (II) event5 - Asus Wireless Radio Control: device is a keyboard
[ 8.588] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 8.588] (**) Video Bus: Applying InputClass "devname"
[ 8.588] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 8.588] (**) Video Bus: Applying InputClass "system-keyboard"
[ 8.588] (II) Using input driver 'libinput' for 'Video Bus'
[ 8.588] (**) Video Bus: always reports core events
[ 8.588] (**) Option "Device" "/dev/input/event14"
[ 8.589] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[ 8.589] (II) event14 - Video Bus: device is a keyboard
[ 8.589] (II) event14 - Video Bus: device removed
[ 8.623] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event14"
[ 8.623] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 8.623] (**) Option "xkb_layout" "es"
[ 8.626] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[ 8.626] (II) event14 - Video Bus: device is a keyboard
[ 8.629] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 8.629] (**) Video Bus: Applying InputClass "devname"
[ 8.629] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 8.629] (**) Video Bus: Applying InputClass "system-keyboard"
[ 8.629] (II) Using input driver 'libinput' for 'Video Bus'
[ 8.629] (**) Video Bus: always reports core events
[ 8.629] (**) Option "Device" "/dev/input/event15"
[ 8.633] (II) event15 - Video Bus: is tagged by udev as: Keyboard
[ 8.633] (II) event15 - Video Bus: device is a keyboard
[ 8.634] (II) event15 - Video Bus: device removed
[ 8.676] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input17/event15"
[ 8.676] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 8.676] (**) Option "xkb_layout" "es"
[ 8.681] (II) event15 - Video Bus: is tagged by udev as: Keyboard
[ 8.681] (II) event15 - Video Bus: device is a keyboard
[ 8.684] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 8.684] (**) Lid Switch: Applying InputClass "devname"
[ 8.684] (II) Using input driver 'libinput' for 'Lid Switch'
[ 8.684] (**) Lid Switch: always reports core events
[ 8.684] (**) Option "Device" "/dev/input/event0"
[ 8.688] (II) event0 - Lid Switch: is tagged by udev as: Switch
[ 8.688] (II) event0 - Lid Switch: device is a switch device
[ 8.689] (II) event0 - Lid Switch: device removed
[ 8.723] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/PNP0C09:01/PNP0C0D:00/input/input0/event0"
[ 8.723] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 10)
[ 8.727] (II) event0 - Lid Switch: is tagged by udev as: Switch
[ 8.728] (II) event0 - Lid Switch: device is a switch device
[ 8.730] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 8.730] (**) Power Button: Applying InputClass "devname"
[ 8.730] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.730] (**) Power Button: Applying InputClass "system-keyboard"
[ 8.730] (II) Using input driver 'libinput' for 'Power Button'
[ 8.730] (**) Power Button: always reports core events
[ 8.730] (**) Option "Device" "/dev/input/event2"
[ 8.733] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 8.733] (II) event2 - Power Button: device is a keyboard
[ 8.734] (II) event2 - Power Button: device removed
[ 8.763] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 8.763] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 11)
[ 8.763] (**) Option "xkb_layout" "es"
[ 8.766] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 8.767] (II) event2 - Power Button: device is a keyboard
[ 8.769] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 8.769] (**) Sleep Button: Applying InputClass "devname"
[ 8.769] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 8.769] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 8.769] (II) Using input driver 'libinput' for 'Sleep Button'
[ 8.769] (**) Sleep Button: always reports core events
[ 8.769] (**) Option "Device" "/dev/input/event1"
[ 8.772] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 8.772] (II) event1 - Sleep Button: device is a keyboard
[ 8.773] (II) event1 - Sleep Button: device removed
[ 8.790] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 8.790] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 12)
[ 8.790] (**) Option "xkb_layout" "es"
[ 8.793] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 8.794] (II) event1 - Sleep Button: device is a keyboard
[ 8.796] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[ 8.796] (**) HDA NVidia HDMI/DP,pcm=7: Applying InputClass "devname"
[ 8.796] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=7'
[ 8.796] (**) HDA NVidia HDMI/DP,pcm=7: always reports core events
[ 8.796] (**) Option "Device" "/dev/input/event10"
[ 8.797] (II) event10 - HDA NVidia HDMI/DP,pcm=7: is tagged by udev as: Switch
[ 8.833] (II) event10 - not using input device '/dev/input/event10'.
[ 8.833] (EE) libinput: HDA NVidia HDMI/DP,pcm=7: Failed to create a device for /dev/input/event10
[ 8.833] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=7"
[ 8.833] (II) UnloadModule: "libinput"
[ 8.834] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[ 8.834] (**) HDA NVidia HDMI/DP,pcm=8: Applying InputClass "devname"
[ 8.834] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=8'
[ 8.834] (**) HDA NVidia HDMI/DP,pcm=8: always reports core events
[ 8.834] (**) Option "Device" "/dev/input/event11"
[ 8.835] (II) event11 - HDA NVidia HDMI/DP,pcm=8: is tagged by udev as: Switch
[ 8.866] (II) event11 - not using input device '/dev/input/event11'.
[ 8.866] (EE) libinput: HDA NVidia HDMI/DP,pcm=8: Failed to create a device for /dev/input/event11
[ 8.866] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=8"
[ 8.866] (II) UnloadModule: "libinput"
[ 8.868] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[ 8.868] (**) HDA NVidia HDMI/DP,pcm=9: Applying InputClass "devname"
[ 8.868] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=9'
[ 8.868] (**) HDA NVidia HDMI/DP,pcm=9: always reports core events
[ 8.868] (**) Option "Device" "/dev/input/event12"
[ 8.871] (II) event12 - HDA NVidia HDMI/DP,pcm=9: is tagged by udev as: Switch
[ 8.910] (II) event12 - not using input device '/dev/input/event12'.
[ 8.910] (EE) libinput: HDA NVidia HDMI/DP,pcm=9: Failed to create a device for /dev/input/event12
[ 8.910] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=9"
[ 8.910] (II) UnloadModule: "libinput"
[ 8.911] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[ 8.911] (**) HDA NVidia HDMI/DP,pcm=3: Applying InputClass "devname"
[ 8.911] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=3'
[ 8.911] (**) HDA NVidia HDMI/DP,pcm=3: always reports core events
[ 8.911] (**) Option "Device" "/dev/input/event9"
[ 8.915] (II) event9 - HDA NVidia HDMI/DP,pcm=3: is tagged by udev as: Switch
[ 8.963] (II) event9 - not using input device '/dev/input/event9'.
[ 8.963] (EE) libinput: HDA NVidia HDMI/DP,pcm=3: Failed to create a device for /dev/input/event9
[ 8.963] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=3"
[ 8.963] (II) UnloadModule: "libinput"
[ 8.966] (II) config/udev: Adding input device Asus Keyboard (/dev/input/event20)
[ 8.967] (**) Asus Keyboard: Applying InputClass "devname"
[ 8.967] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 8.967] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 8.967] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 8.967] (**) Asus Keyboard: always reports core events
[ 8.967] (**) Option "Device" "/dev/input/event20"
[ 8.971] (II) event20 - Asus Keyboard: is tagged by udev as: Keyboard
[ 8.971] (II) event20 - Asus Keyboard: device is a keyboard
[ 8.973] (II) event20 - Asus Keyboard: device removed
[ 9.000] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0B05:1866.0005/input/input43/event20"
[ 9.000] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: KEYBOARD, id 13)
[ 9.000] (**) Option "xkb_layout" "es"
[ 9.004] (II) event20 - Asus Keyboard: is tagged by udev as: Keyboard
[ 9.005] (II) event20 - Asus Keyboard: device is a keyboard
[ 9.009] (II) config/udev: Adding input device Asus Keyboard (/dev/input/event21)
[ 9.009] (**) Asus Keyboard: Applying InputClass "devname"
[ 9.009] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.009] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 9.009] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 9.009] (**) Asus Keyboard: always reports core events
[ 9.009] (**) Option "Device" "/dev/input/event21"
[ 9.014] (II) event21 - Asus Keyboard: is tagged by udev as: Keyboard
[ 9.014] (II) event21 - Asus Keyboard: device is a keyboard
[ 9.016] (II) event21 - Asus Keyboard: device removed
[ 9.046] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0B05:1866.0007/input/input44/event21"
[ 9.046] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: KEYBOARD, id 14)
[ 9.046] (**) Option "xkb_layout" "es"
[ 9.051] (II) event21 - Asus Keyboard: is tagged by udev as: Keyboard
[ 9.051] (II) event21 - Asus Keyboard: device is a keyboard
[ 9.056] (II) config/udev: Adding input device Asus Keyboard (/dev/input/event25)
[ 9.056] (**) Asus Keyboard: Applying InputClass "devname"
[ 9.056] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.056] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 9.056] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 9.056] (**) Asus Keyboard: always reports core events
[ 9.056] (**) Option "Device" "/dev/input/event25"
[ 9.061] (II) event25 - Asus Keyboard: is tagged by udev as: Keyboard
[ 9.061] (II) event25 - Asus Keyboard: device is a keyboard
[ 9.062] (II) event25 - Asus Keyboard: device removed
[ 9.093] (II) libinput: Asus Keyboard: needs a virtual subdevice
[ 9.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:0B05:1866.0008/input/input50/event25"
[ 9.093] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: MOUSE, id 15)
[ 9.093] (**) Option "AccelerationScheme" "none"
[ 9.093] (**) Asus Keyboard: (accel) selected scheme none/0
[ 9.093] (**) Asus Keyboard: (accel) acceleration factor: 2.000
[ 9.093] (**) Asus Keyboard: (accel) acceleration threshold: 4
[ 9.098] (II) event25 - Asus Keyboard: is tagged by udev as: Keyboard
[ 9.098] (II) event25 - Asus Keyboard: device is a keyboard
[ 9.102] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event31)
[ 9.102] (**) Logitech USB Receiver: Applying InputClass "devname"
[ 9.102] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 9.102] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[ 9.102] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 9.102] (**) Logitech USB Receiver: always reports core events
[ 9.102] (**) Option "Device" "/dev/input/event31"
[ 9.107] (II) event31 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 9.107] (II) event31 - Logitech USB Receiver: device is a keyboard
[ 9.108] (II) event31 - Logitech USB Receiver: device removed
[ 9.150] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.0/0003:046D:C548.000A/input/input35/event31"
[ 9.150] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 16)
[ 9.150] (**) Option "xkb_layout" "es"
[ 9.155] (II) event31 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 9.155] (II) event31 - Logitech USB Receiver: device is a keyboard
[ 9.159] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event258)
[ 9.159] (**) Logitech USB Receiver Mouse: Applying InputClass "devname"
[ 9.159] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[ 9.159] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[ 9.159] (**) Logitech USB Receiver Mouse: always reports core events
[ 9.159] (**) Option "Device" "/dev/input/event258"
[ 9.164] (II) event258 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 9.165] (II) event258 - Logitech USB Receiver Mouse: device is a pointer
[ 9.166] (II) event258 - Logitech USB Receiver Mouse: device removed
[ 9.203] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.203] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.203] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.203] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.000B/input/input38/event258"
[ 9.203] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 17)
[ 9.203] (**) Option "AccelerationScheme" "none"
[ 9.204] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[ 9.204] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[ 9.204] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[ 9.208] (II) event258 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 9.209] (II) event258 - Logitech USB Receiver Mouse: device is a pointer
[ 9.210] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse3)
[ 9.210] (**) Logitech USB Receiver Mouse: Applying InputClass "devname"
[ 9.210] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[ 9.210] (**) Logitech USB Receiver Mouse: always reports core events
[ 9.210] (**) Option "Device" "/dev/input/mouse3"
[ 9.246] (II) mouse3 - not using input device '/dev/input/mouse3'.
[ 9.246] (EE) libinput: Logitech USB Receiver Mouse: Failed to create a device for /dev/input/mouse3
[ 9.246] (EE) PreInit returned 2 for "Logitech USB Receiver Mouse"
[ 9.246] (II) UnloadModule: "libinput"
[ 9.248] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event259)
[ 9.248] (**) Logitech USB Receiver Consumer Control: Applying InputClass "devname"
[ 9.248] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 9.248] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[ 9.248] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 9.248] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 9.248] (**) Option "Device" "/dev/input/event259"
[ 9.251] (II) event259 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 9.251] (II) event259 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 9.251] (II) event259 - Logitech USB Receiver Consumer Control: device removed
[ 9.273] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[ 9.273] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.000B/input/input39/event259"
[ 9.273] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 18)
[ 9.273] (**) Option "AccelerationScheme" "none"
[ 9.273] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[ 9.273] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 9.273] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[ 9.278] (II) event259 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 9.279] (II) event259 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 9.282] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event260)
[ 9.282] (**) Logitech USB Receiver System Control: Applying InputClass "devname"
[ 9.282] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[ 9.283] (**) Logitech USB Receiver System Control: Applying InputClass "system-keyboard"
[ 9.283] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[ 9.283] (**) Logitech USB Receiver System Control: always reports core events
[ 9.283] (**) Option "Device" "/dev/input/event260"
[ 9.287] (II) event260 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 9.288] (II) event260 - Logitech USB Receiver System Control: device is a keyboard
[ 9.289] (II) event260 - Logitech USB Receiver System Control: device removed
[ 9.320] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.000B/input/input40/event260"
[ 9.320] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 19)
[ 9.320] (**) Option "xkb_layout" "es"
[ 9.325] (II) event260 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 9.325] (II) event260 - Logitech USB Receiver System Control: device is a keyboard
[ 9.329] (II) config/udev: Adding input device Kingston HyperX Cloud II Wireless Consumer Control (/dev/input/event261)
[ 9.329] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "devname"
[ 9.329] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 9.329] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "system-keyboard"
[ 9.329] (II) Using input driver 'libinput' for 'Kingston HyperX Cloud II Wireless Consumer Control'
[ 9.329] (**) Kingston HyperX Cloud II Wireless Consumer Control: always reports core events
[ 9.329] (**) Option "Device" "/dev/input/event261"
[ 9.334] (II) event261 - Kingston HyperX Cloud II Wireless Consumer Control: is tagged by udev as: Keyboard
[ 9.335] (II) event261 - Kingston HyperX Cloud II Wireless Consumer Control: device is a keyboard
[ 9.335] (II) event261 - Kingston HyperX Cloud II Wireless Consumer Control: device removed
[ 9.373] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2:1.3/0003:0951:1718.000D/input/input41/event261"
[ 9.373] (II) XINPUT: Adding extended input device "Kingston HyperX Cloud II Wireless Consumer Control" (type: KEYBOARD, id 20)
[ 9.373] (**) Option "xkb_layout" "es"
[ 9.378] (II) event261 - Kingston HyperX Cloud II Wireless Consumer Control: is tagged by udev as: Keyboard
[ 9.379] (II) event261 - Kingston HyperX Cloud II Wireless Consumer Control: device is a keyboard
[ 9.382] (II) config/udev: Adding input device Kingston HyperX Cloud II Wireless (/dev/input/event262)
[ 9.383] (**) Kingston HyperX Cloud II Wireless: Applying InputClass "devname"
[ 9.383] (II) Using input driver 'libinput' for 'Kingston HyperX Cloud II Wireless'
[ 9.383] (**) Kingston HyperX Cloud II Wireless: always reports core events
[ 9.383] (**) Option "Device" "/dev/input/event262"
[ 9.387] (II) event262 - Kingston HyperX Cloud II Wireless: not tagged as supported input device
[ 9.436] (II) event262 - not using input device '/dev/input/event262'.
[ 9.436] (EE) libinput: Kingston HyperX Cloud II Wireless: Failed to create a device for /dev/input/event262
[ 9.436] (EE) PreInit returned 2 for "Kingston HyperX Cloud II Wireless"
[ 9.436] (II) UnloadModule: "libinput"
[ 9.439] (II) config/udev: Adding input device Kingston HyperX QuadCast S Consumer Control (/dev/input/event16)
[ 9.439] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 9.439] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 9.439] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 9.440] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 9.440] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 9.440] (**) Option "Device" "/dev/input/event16"
[ 9.444] (II) event16 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 9.445] (II) event16 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 9.446] (II) event16 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 9.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.3/0003:0951:171D.0002/input/input18/event16"
[ 9.480] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: KEYBOARD, id 21)
[ 9.480] (**) Option "xkb_layout" "es"
[ 9.485] (II) event16 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 9.485] (II) event16 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 9.489] (II) config/udev: Adding input device Kingston HyperX QuadCast S Consumer Control (/dev/input/event17)
[ 9.489] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 9.489] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 9.489] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 9.489] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 9.489] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 9.489] (**) Option "Device" "/dev/input/event17"
[ 9.494] (II) event17 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 9.494] (II) event17 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 9.495] (II) event17 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 9.526] (II) libinput: Kingston HyperX QuadCast S Consumer Control: needs a virtual subdevice
[ 9.526] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:0951:171F.0003/input/input20/event17"
[ 9.526] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: MOUSE, id 22)
[ 9.527] (**) Option "AccelerationScheme" "none"
[ 9.527] (**) Kingston HyperX QuadCast S Consumer Control: (accel) selected scheme none/0
[ 9.527] (**) Kingston HyperX QuadCast S Consumer Control: (accel) acceleration factor: 2.000
[ 9.527] (**) Kingston HyperX QuadCast S Consumer Control: (accel) acceleration threshold: 4
[ 9.532] (II) event17 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 9.532] (II) event17 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 9.535] (II) config/udev: Adding input device Kingston HyperX QuadCast S (/dev/input/event18)
[ 9.536] (**) Kingston HyperX QuadCast S: Applying InputClass "devname"
[ 9.536] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S'
[ 9.536] (**) Kingston HyperX QuadCast S: always reports core events
[ 9.536] (**) Option "Device" "/dev/input/event18"
[ 9.540] (II) event18 - Kingston HyperX QuadCast S: not tagged as supported input device
[ 9.590] (II) event18 - not using input device '/dev/input/event18'.
[ 9.590] (EE) libinput: Kingston HyperX QuadCast S: Failed to create a device for /dev/input/event18
[ 9.590] (EE) PreInit returned 2 for "Kingston HyperX QuadCast S"
[ 9.590] (II) UnloadModule: "libinput"
[ 9.592] (II) config/udev: Adding input device C922 Pro Stream Webcam (/dev/input/event19)
[ 9.592] (**) C922 Pro Stream Webcam: Applying InputClass "devname"
[ 9.592] (**) C922 Pro Stream Webcam: Applying InputClass "libinput keyboard catchall"
[ 9.592] (**) C922 Pro Stream Webcam: Applying InputClass "system-keyboard"
[ 9.592] (II) Using input driver 'libinput' for 'C922 Pro Stream Webcam'
[ 9.592] (**) C922 Pro Stream Webcam: always reports core events
[ 9.592] (**) Option "Device" "/dev/input/event19"
[ 9.596] (II) event19 - C922 Pro Stream Webcam: is tagged by udev as: Keyboard
[ 9.596] (II) event19 - C922 Pro Stream Webcam: device is a keyboard
[ 9.597] (II) event19 - C922 Pro Stream Webcam: device removed
[ 9.633] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input22/event19"
[ 9.633] (II) XINPUT: Adding extended input device "C922 Pro Stream Webcam" (type: KEYBOARD, id 23)
[ 9.633] (**) Option "xkb_layout" "es"
[ 9.637] (II) event19 - C922 Pro Stream Webcam: is tagged by udev as: Keyboard
[ 9.638] (II) event19 - C922 Pro Stream Webcam: device is a keyboard
[ 9.641] (II) config/udev: Adding input device USB2.0 HD UVC WebCam: USB2.0 HD (/dev/input/event22)
[ 9.641] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "devname"
[ 9.641] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[ 9.641] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "system-keyboard"
[ 9.641] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam: USB2.0 HD'
[ 9.641] (**) USB2.0 HD UVC WebCam: USB2.0 HD: always reports core events
[ 9.641] (**) Option "Device" "/dev/input/event22"
[ 9.645] (II) event22 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 9.645] (II) event22 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 9.646] (II) event22 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[ 9.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input25/event22"
[ 9.676] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam: USB2.0 HD" (type: KEYBOARD, id 24)
[ 9.676] (**) Option "xkb_layout" "es"
[ 9.681] (II) event22 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 9.681] (II) event22 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 9.684] (II) config/udev: Adding input device ELAN1200:00 04F3:307A Mouse (/dev/input/event6)
[ 9.684] (**) ELAN1200:00 04F3:307A Mouse: Applying InputClass "devname"
[ 9.684] (**) ELAN1200:00 04F3:307A Mouse: Applying InputClass "libinput pointer catchall"
[ 9.684] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:307A Mouse'
[ 9.684] (**) ELAN1200:00 04F3:307A Mouse: always reports core events
[ 9.684] (**) Option "Device" "/dev/input/event6"
[ 9.688] (II) event6 - ELAN1200:00 04F3:307A Mouse: is tagged by udev as: Mouse Pointingstick
[ 9.689] (II) event6 - ELAN1200:00 04F3:307A Mouse: device is a pointer
[ 9.695] (II) event6 - ELAN1200:00 04F3:307A Mouse: device removed
[ 9.740] (II) libinput: ELAN1200:00 04F3:307A Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.740] (II) libinput: ELAN1200:00 04F3:307A Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.740] (II) libinput: ELAN1200:00 04F3:307A Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.740] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-3/i2c-ELAN1200:00/0018:04F3:307A.0001/input/input13/event6"
[ 9.740] (II) XINPUT: Adding extended input device "ELAN1200:00 04F3:307A Mouse" (type: MOUSE, id 25)
[ 9.740] (**) Option "AccelerationScheme" "none"
[ 9.740] (**) ELAN1200:00 04F3:307A Mouse: (accel) selected scheme none/0
[ 9.740] (**) ELAN1200:00 04F3:307A Mouse: (accel) acceleration factor: 2.000
[ 9.740] (**) ELAN1200:00 04F3:307A Mouse: (accel) acceleration threshold: 4
[ 9.744] (II) event6 - ELAN1200:00 04F3:307A Mouse: is tagged by udev as: Mouse Pointingstick
[ 9.745] (II) event6 - ELAN1200:00 04F3:307A Mouse: device is a pointer
[ 9.753] (II) config/udev: Adding input device ELAN1200:00 04F3:307A Mouse (/dev/input/mouse0)
[ 9.754] (**) ELAN1200:00 04F3:307A Mouse: Applying InputClass "devname"
[ 9.754] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:307A Mouse'
[ 9.754] (**) ELAN1200:00 04F3:307A Mouse: always reports core events
[ 9.754] (**) Option "Device" "/dev/input/mouse0"
[ 9.793] (II) mouse0 - not using input device '/dev/input/mouse0'.
[ 9.793] (EE) libinput: ELAN1200:00 04F3:307A Mouse: Failed to create a device for /dev/input/mouse0
[ 9.793] (EE) PreInit returned 2 for "ELAN1200:00 04F3:307A Mouse"
[ 9.793] (II) UnloadModule: "libinput"
[ 9.796] (II) config/udev: Adding input device ELAN1200:00 04F3:307A Touchpad (/dev/input/event7)
[ 9.796] (**) ELAN1200:00 04F3:307A Touchpad: Applying InputClass "devname"
[ 9.796] (**) ELAN1200:00 04F3:307A Touchpad: Applying InputClass "libinput touchpad catchall"
[ 9.796] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:307A Touchpad'
[ 9.796] (**) ELAN1200:00 04F3:307A Touchpad: always reports core events
[ 9.796] (**) Option "Device" "/dev/input/event7"
[ 9.800] (II) event7 - ELAN1200:00 04F3:307A Touchpad: is tagged by udev as: Touchpad
[ 9.805] (II) event7 - ELAN1200:00 04F3:307A Touchpad: device is a touchpad
[ 9.806] (II) event7 - ELAN1200:00 04F3:307A Touchpad: device removed
[ 9.846] (**) Option "Tapping" "on"
[ 9.846] (II) libinput: ELAN1200:00 04F3:307A Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.846] (II) libinput: ELAN1200:00 04F3:307A Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.846] (II) libinput: ELAN1200:00 04F3:307A Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.848] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-3/i2c-ELAN1200:00/0018:04F3:307A.0001/input/input14/event7"
[ 9.848] (II) XINPUT: Adding extended input device "ELAN1200:00 04F3:307A Touchpad" (type: TOUCHPAD, id 26)
[ 9.850] (**) Option "AccelerationScheme" "none"
[ 9.850] (**) ELAN1200:00 04F3:307A Touchpad: (accel) selected scheme none/0
[ 9.851] (**) ELAN1200:00 04F3:307A Touchpad: (accel) acceleration factor: 2.000
[ 9.851] (**) ELAN1200:00 04F3:307A Touchpad: (accel) acceleration threshold: 4
[ 9.855] (II) event7 - ELAN1200:00 04F3:307A Touchpad: is tagged by udev as: Touchpad
[ 9.860] (II) event7 - ELAN1200:00 04F3:307A Touchpad: device is a touchpad
[ 9.864] (II) config/udev: Adding input device ELAN1200:00 04F3:307A Touchpad (/dev/input/mouse1)
[ 9.864] (**) ELAN1200:00 04F3:307A Touchpad: Applying InputClass "devname"
[ 9.864] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:307A Touchpad'
[ 9.864] (**) ELAN1200:00 04F3:307A Touchpad: always reports core events
[ 9.864] (**) Option "Device" "/dev/input/mouse1"
[ 9.910] (II) mouse1 - not using input device '/dev/input/mouse1'.
[ 9.910] (EE) libinput: ELAN1200:00 04F3:307A Touchpad: Failed to create a device for /dev/input/mouse1
[ 9.910] (EE) PreInit returned 2 for "ELAN1200:00 04F3:307A Touchpad"
[ 9.910] (II) UnloadModule: "libinput"
[ 9.911] (II) config/udev: Adding input device HDA Intel PCH Headset Mic (/dev/input/event256)
[ 9.911] (**) HDA Intel PCH Headset Mic: Applying InputClass "devname"
[ 9.911] (II) Using input driver 'libinput' for 'HDA Intel PCH Headset Mic'
[ 9.911] (**) HDA Intel PCH Headset Mic: always reports core events
[ 9.911] (**) Option "Device" "/dev/input/event256"
[ 9.914] (II) event256 - HDA Intel PCH Headset Mic: is tagged by udev as: Switch
[ 9.953] (II) event256 - not using input device '/dev/input/event256'.
[ 9.953] (EE) libinput: HDA Intel PCH Headset Mic: Failed to create a device for /dev/input/event256
[ 9.953] (EE) PreInit returned 2 for "HDA Intel PCH Headset Mic"
[ 9.953] (II) UnloadModule: "libinput"
[ 9.955] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event257)
[ 9.955] (**) HDA Intel PCH Headphone: Applying InputClass "devname"
[ 9.955] (II) Using input driver 'libinput' for 'HDA Intel PCH Headphone'
[ 9.955] (**) HDA Intel PCH Headphone: always reports core events
[ 9.955] (**) Option "Device" "/dev/input/event257"
[ 9.958] (II) event257 - HDA Intel PCH Headphone: is tagged by udev as: Switch
[ 9.996] (II) event257 - not using input device '/dev/input/event257'.
[ 9.996] (EE) libinput: HDA Intel PCH Headphone: Failed to create a device for /dev/input/event257
[ 9.996] (EE) PreInit returned 2 for "HDA Intel PCH Headphone"
[ 9.996] (II) UnloadModule: "libinput"
[ 9.998] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event13)
[ 9.998] (**) Asus WMI hotkeys: Applying InputClass "devname"
[ 9.998] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 9.998] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 9.998] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 9.998] (**) Asus WMI hotkeys: always reports core events
[ 9.998] (**) Option "Device" "/dev/input/event13"
[ 10.001] (II) event13 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 10.001] (II) event13 - Asus WMI hotkeys: device is a keyboard
[ 10.003] (II) event13 - Asus WMI hotkeys: device removed
[ 10.043] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event13"
[ 10.043] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 27)
[ 10.043] (**) Option "xkb_layout" "es"
[ 10.046] (II) event13 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 10.047] (II) event13 - Asus WMI hotkeys: device is a keyboard
[ 10.050] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 10.050] (**) AT Translated Set 2 keyboard: Applying InputClass "devname"
[ 10.050] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.050] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 10.050] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 10.050] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.050] (**) Option "Device" "/dev/input/event4"
[ 10.053] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 10.053] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 10.062] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 10.090] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 10.090] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 28)
[ 10.090] (**) Option "xkb_layout" "es"
[ 10.094] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 10.094] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 10.104] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 10.104] (**) PC Speaker: Applying InputClass "devname"
[ 10.104] (II) Using input driver 'libinput' for 'PC Speaker'
[ 10.104] (**) PC Speaker: always reports core events
[ 10.104] (**) Option "Device" "/dev/input/event8"
[ 10.107] (II) event8 - PC Speaker: not tagged as supported input device
[ 10.153] (II) event8 - not using input device '/dev/input/event8'.
[ 10.153] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event8
[ 10.153] (EE) PreInit returned 2 for "PC Speaker"
[ 10.153] (II) UnloadModule: "libinput"
[ 10.179] (**) Asus Keyboard: Applying InputClass "devname"
[ 10.179] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.179] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 10.179] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 10.180] (**) Asus Keyboard: always reports core events
[ 10.180] (**) Option "Device" "/dev/input/event25"
[ 10.180] (II) libinput: Asus Keyboard: is a virtual subdevice
[ 10.180] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:0B05:1866.0008/input/input50/event25"
[ 10.180] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: KEYBOARD, id 29)
[ 10.180] (**) Option "xkb_layout" "es"
[ 10.180] (**) Logitech USB Receiver Consumer Control: Applying InputClass "devname"
[ 10.180] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 10.180] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[ 10.180] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 10.180] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 10.180] (**) Option "Device" "/dev/input/event259"
[ 10.180] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[ 10.181] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.000B/input/input39/event259"
[ 10.181] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 30)
[ 10.181] (**) Option "xkb_layout" "es"
[ 10.181] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 10.181] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 10.181] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 10.181] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 10.181] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 10.181] (**) Option "Device" "/dev/input/event17"
[ 10.181] (II) libinput: Kingston HyperX QuadCast S Consumer Control: is a virtual subdevice
[ 10.181] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:0951:171F.0003/input/input20/event17"
[ 10.181] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: KEYBOARD, id 31)
[ 10.181] (**) Option "xkb_layout" "es"
[ 10.182] (II) config/udev: removing device Kingston HyperX QuadCast S Consumer Control
[ 10.183] (II) event16 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 10.220] (II) UnloadModule: "libinput"
[ 10.222] (II) config/udev: Adding input device Kingston HyperX QuadCast S Consumer Control (/dev/input/event16)
[ 10.222] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 10.222] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 10.222] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 10.222] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 10.222] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 10.222] (**) Option "Device" "/dev/input/event16"
[ 10.225] (II) event16 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 10.225] (II) event16 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 10.226] (II) event16 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 10.263] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.3/0003:0951:171D.0002/input/input18/event16"
[ 10.263] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: KEYBOARD, id 21)
[ 10.263] (**) Option "xkb_layout" "es"
[ 10.266] (II) event16 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 10.266] (II) event16 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 10.267] (II) config/udev: removing device Logitech USB Receiver Consumer Control
[ 10.267] (II) UnloadModule: "libinput"
[ 10.267] (II) config/udev: removing device Logitech USB Receiver Consumer Control
[ 10.267] (II) event259 - Logitech USB Receiver Consumer Control: device removed
[ 10.290] (II) UnloadModule: "libinput"
[ 10.292] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event259)
[ 10.292] (**) Logitech USB Receiver Consumer Control: Applying InputClass "devname"
[ 10.292] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 10.292] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[ 10.292] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 10.292] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 10.292] (**) Option "Device" "/dev/input/event259"
[ 10.298] (II) event259 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 10.298] (II) event259 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 10.300] (II) event259 - Logitech USB Receiver Consumer Control: device removed
[ 10.326] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[ 10.326] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.000B/input/input39/event259"
[ 10.326] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 18)
[ 10.327] (**) Option "AccelerationScheme" "none"
[ 10.327] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[ 10.327] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 10.327] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[ 10.332] (II) event259 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 10.333] (II) event259 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 10.335] (**) Logitech USB Receiver Consumer Control: Applying InputClass "devname"
[ 10.335] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 10.335] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[ 10.335] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 10.335] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 10.335] (**) Option "Device" "/dev/input/event259"
[ 10.335] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[ 10.335] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.000B/input/input39/event259"
[ 10.335] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 30)
[ 10.335] (**) Option "xkb_layout" "es"
[ 10.336] (II) config/udev: removing device Logitech USB Receiver Mouse
[ 10.336] (II) event258 - Logitech USB Receiver Mouse: device removed
[ 10.370] (II) UnloadModule: "libinput"
[ 10.372] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event258)
[ 10.372] (**) Logitech USB Receiver Mouse: Applying InputClass "devname"
[ 10.372] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[ 10.372] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[ 10.372] (**) Logitech USB Receiver Mouse: always reports core events
[ 10.372] (**) Option "Device" "/dev/input/event258"
[ 10.377] (II) event258 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 10.378] (II) event258 - Logitech USB Receiver Mouse: device is a pointer
[ 10.380] (II) event258 - Logitech USB Receiver Mouse: device removed
[ 10.433] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 10.433] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 10.433] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 10.433] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.000B/input/input38/event258"
[ 10.433] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 17)
[ 10.433] (**) Option "AccelerationScheme" "none"
[ 10.434] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[ 10.434] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[ 10.434] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[ 10.439] (II) event258 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 10.439] (II) event258 - Logitech USB Receiver Mouse: device is a pointer
[ 10.439] (II) config/udev: removing device Kingston HyperX QuadCast S Consumer Control
[ 10.439] (II) UnloadModule: "libinput"
[ 10.439] (II) config/udev: removing device Kingston HyperX QuadCast S Consumer Control
[ 10.439] (II) event17 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 10.463] (II) UnloadModule: "libinput"
[ 10.464] (II) config/udev: Adding input device Kingston HyperX QuadCast S Consumer Control (/dev/input/event17)
[ 10.464] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 10.464] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 10.464] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 10.464] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 10.464] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 10.464] (**) Option "Device" "/dev/input/event17"
[ 10.465] (II) event17 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 10.465] (II) event17 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 10.466] (II) event17 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 10.480] (II) libinput: Kingston HyperX QuadCast S Consumer Control: needs a virtual subdevice
[ 10.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:0951:171F.0003/input/input20/event17"
[ 10.480] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: MOUSE, id 22)
[ 10.480] (**) Option "AccelerationScheme" "none"
[ 10.480] (**) Kingston HyperX QuadCast S Consumer Control: (accel) selected scheme none/0
[ 10.480] (**) Kingston HyperX QuadCast S Consumer Control: (accel) acceleration factor: 2.000
[ 10.480] (**) Kingston HyperX QuadCast S Consumer Control: (accel) acceleration threshold: 4
[ 10.483] (II) event17 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 10.483] (II) event17 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 10.484] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 10.484] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 10.484] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 10.484] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 10.484] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 10.484] (**) Option "Device" "/dev/input/event17"
[ 10.484] (II) libinput: Kingston HyperX QuadCast S Consumer Control: is a virtual subdevice
[ 10.484] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:0951:171F.0003/input/input20/event17"
[ 10.484] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: KEYBOARD, id 31)
[ 10.484] (**) Option "xkb_layout" "es"
[ 10.485] (II) config/udev: removing device Logitech USB Receiver System Control
[ 10.485] (II) event260 - Logitech USB Receiver System Control: device removed
[ 10.506] (II) UnloadModule: "libinput"
[ 10.509] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event260)
[ 10.509] (**) Logitech USB Receiver System Control: Applying InputClass "devname"
[ 10.509] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[ 10.509] (**) Logitech USB Receiver System Control: Applying InputClass "system-keyboard"
[ 10.509] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[ 10.509] (**) Logitech USB Receiver System Control: always reports core events
[ 10.509] (**) Option "Device" "/dev/input/event260"
[ 10.514] (II) event260 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 10.514] (II) event260 - Logitech USB Receiver System Control: device is a keyboard
[ 10.516] (II) event260 - Logitech USB Receiver System Control: device removed
[ 10.533] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.000B/input/input40/event260"
[ 10.533] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 19)
[ 10.533] (**) Option "xkb_layout" "es"
[ 10.539] (II) event260 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 10.539] (II) event260 - Logitech USB Receiver System Control: device is a keyboard
[ 10.541] (II) config/udev: removing device Kingston HyperX Cloud II Wireless Consumer Control
[ 10.542] (II) event261 - Kingston HyperX Cloud II Wireless Consumer Control: device removed
[ 10.580] (II) UnloadModule: "libinput"
[ 10.582] (II) config/udev: Adding input device Kingston HyperX Cloud II Wireless Consumer Control (/dev/input/event261)
[ 10.582] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "devname"
[ 10.582] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 10.582] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "system-keyboard"
[ 10.582] (II) Using input driver 'libinput' for 'Kingston HyperX Cloud II Wireless Consumer Control'
[ 10.582] (**) Kingston HyperX Cloud II Wireless Consumer Control: always reports core events
[ 10.582] (**) Option "Device" "/dev/input/event261"
[ 10.587] (II) event261 - Kingston HyperX Cloud II Wireless Consumer Control: is tagged by udev as: Keyboard
[ 10.588] (II) event261 - Kingston HyperX Cloud II Wireless Consumer Control: device is a keyboard
[ 10.589] (II) event261 - Kingston HyperX Cloud II Wireless Consumer Control: device removed
[ 10.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2:1.3/0003:0951:1718.000D/input/input41/event261"
[ 10.643] (II) XINPUT: Adding extended input device "Kingston HyperX Cloud II Wireless Consumer Control" (type: KEYBOARD, id 20)
[ 10.643] (**) Option "xkb_layout" "es"
[ 10.649] (II) event261 - Kingston HyperX Cloud II Wireless Consumer Control: is tagged by udev as: Keyboard
[ 10.649] (II) event261 - Kingston HyperX Cloud II Wireless Consumer Control: device is a keyboard
[ 10.653] (II) config/udev: Adding input device Kingston HyperX QuadCast S (/dev/input/event18)
[ 10.653] (**) Kingston HyperX QuadCast S: Applying InputClass "devname"
[ 10.654] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S'
[ 10.654] (**) Kingston HyperX QuadCast S: always reports core events
[ 10.654] (**) Option "Device" "/dev/input/event18"
[ 10.659] (II) event18 - Kingston HyperX QuadCast S: not tagged as supported input device
[ 10.713] (II) event18 - not using input device '/dev/input/event18'.
[ 10.713] (EE) libinput: Kingston HyperX QuadCast S: Failed to create a device for /dev/input/event18
[ 10.713] (EE) PreInit returned 2 for "Kingston HyperX QuadCast S"
[ 10.713] (II) UnloadModule: "libinput"
[ 10.713] (II) config/udev: removing device Logitech USB Receiver
[ 10.713] (II) event31 - Logitech USB Receiver: device removed
[ 10.730] (II) UnloadModule: "libinput"
[ 10.731] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event31)
[ 10.731] (**) Logitech USB Receiver: Applying InputClass "devname"
[ 10.731] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 10.731] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[ 10.731] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 10.731] (**) Logitech USB Receiver: always reports core events
[ 10.731] (**) Option "Device" "/dev/input/event31"
[ 10.734] (II) event31 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 10.734] (II) event31 - Logitech USB Receiver: device is a keyboard
[ 10.735] (II) event31 - Logitech USB Receiver: device removed
[ 10.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.0/0003:046D:C548.000A/input/input35/event31"
[ 10.756] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 16)
[ 10.756] (**) Option "xkb_layout" "es"
[ 10.762] (II) event31 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 10.763] (II) event31 - Logitech USB Receiver: device is a keyboard
[ 10.767] (II) config/udev: Adding input device Kingston HyperX Cloud II Wireless (/dev/input/event262)
[ 10.767] (**) Kingston HyperX Cloud II Wireless: Applying InputClass "devname"
[ 10.767] (II) Using input driver 'libinput' for 'Kingston HyperX Cloud II Wireless'
[ 10.767] (**) Kingston HyperX Cloud II Wireless: always reports core events
[ 10.767] (**) Option "Device" "/dev/input/event262"
[ 10.772] (II) event262 - Kingston HyperX Cloud II Wireless: not tagged as supported input device
[ 10.830] (II) event262 - not using input device '/dev/input/event262'.
[ 10.830] (EE) libinput: Kingston HyperX Cloud II Wireless: Failed to create a device for /dev/input/event262
[ 10.830] (EE) PreInit returned 2 for "Kingston HyperX Cloud II Wireless"
[ 10.830] (II) UnloadModule: "libinput"
[ 10.834] (II) config/udev: Adding input device (unnamed) (/dev/input/event28)
[ 10.834] (**) (unnamed): Applying InputClass "devname"
[ 10.834] (**) (unnamed): Applying InputClass "libinput keyboard catchall"
[ 10.834] (**) (unnamed): Applying InputClass "system-keyboard"
[ 10.834] (II) Using input driver 'libinput' for '(unnamed)'
[ 10.834] (**) (unnamed): always reports core events
[ 10.834] (**) Option "Device" "/dev/input/event28"
[ 10.834] (EE) client bug: Invalid path /dev/input/event28
[ 10.834] (EE) libinput: (unnamed): Failed to create a device for /dev/input/event28
[ 10.834] (EE) PreInit returned 2 for "(unnamed)"
[ 10.834] (II) UnloadModule: "libinput"
[ 10.837] (II) config/udev: Adding input device (unnamed) (/dev/input/event29)
[ 10.837] (**) (unnamed): Applying InputClass "devname"
[ 10.837] (II) Using input driver 'libinput' for '(unnamed)'
[ 10.837] (**) (unnamed): always reports core events
[ 10.837] (**) Option "Device" "/dev/input/event29"
[ 10.837] (EE) client bug: Invalid path /dev/input/event29
[ 10.837] (EE) libinput: (unnamed): Failed to create a device for /dev/input/event29
[ 10.837] (EE) PreInit returned 2 for "(unnamed)"
[ 10.837] (II) UnloadModule: "libinput"
[ 10.840] (II) config/udev: Adding input device (unnamed) (/dev/input/event30)
[ 10.840] (**) (unnamed): Applying InputClass "devname"
[ 10.840] (II) Using input driver 'libinput' for '(unnamed)'
[ 10.840] (**) (unnamed): always reports core events
[ 10.840] (**) Option "Device" "/dev/input/event30"
[ 10.840] (EE) client bug: Invalid path /dev/input/event30
[ 10.840] (EE) libinput: (unnamed): Failed to create a device for /dev/input/event30
[ 10.840] (EE) PreInit returned 2 for "(unnamed)"
[ 10.840] (II) UnloadModule: "libinput"
[ 10.842] (II) config/udev: removing device Asus Keyboard
[ 10.842] (II) event21 - Asus Keyboard: device removed
[ 10.880] (II) UnloadModule: "libinput"
[ 10.882] (II) config/udev: Adding input device Asus Keyboard (/dev/input/event21)
[ 10.882] (**) Asus Keyboard: Applying InputClass "devname"
[ 10.882] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.882] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 10.882] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 10.882] (**) Asus Keyboard: always reports core events
[ 10.882] (**) Option "Device" "/dev/input/event21"
[ 10.887] (II) event21 - Asus Keyboard: is tagged by udev as: Keyboard
[ 10.887] (II) event21 - Asus Keyboard: device is a keyboard
[ 10.893] (II) event21 - Asus Keyboard: device removed
[ 10.916] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0B05:1866.0007/input/input44/event21"
[ 10.916] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: KEYBOARD, id 14)
[ 10.916] (**) Option "xkb_layout" "es"
[ 10.922] (II) event21 - Asus Keyboard: is tagged by udev as: Keyboard
[ 10.922] (II) event21 - Asus Keyboard: device is a keyboard
[ 10.932] (II) config/udev: removing device Asus Keyboard
[ 10.932] (II) UnloadModule: "libinput"
[ 10.932] (II) config/udev: removing device Asus Keyboard
[ 10.932] (II) event25 - Asus Keyboard: device removed
[ 10.966] (II) UnloadModule: "libinput"
[ 10.969] (II) config/udev: Adding input device Asus Keyboard (/dev/input/event25)
[ 10.969] (**) Asus Keyboard: Applying InputClass "devname"
[ 10.969] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.969] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 10.969] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 10.969] (**) Asus Keyboard: always reports core events
[ 10.969] (**) Option "Device" "/dev/input/event25"
[ 10.973] (II) event25 - Asus Keyboard: is tagged by udev as: Keyboard
[ 10.974] (II) event25 - Asus Keyboard: device is a keyboard
[ 10.975] (II) event25 - Asus Keyboard: device removed
[ 11.006] (II) libinput: Asus Keyboard: needs a virtual subdevice
[ 11.006] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:0B05:1866.0008/input/input50/event25"
[ 11.006] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: MOUSE, id 15)
[ 11.007] (**) Option "AccelerationScheme" "none"
[ 11.007] (**) Asus Keyboard: (accel) selected scheme none/0
[ 11.007] (**) Asus Keyboard: (accel) acceleration factor: 2.000
[ 11.007] (**) Asus Keyboard: (accel) acceleration threshold: 4
[ 11.009] (II) event25 - Asus Keyboard: is tagged by udev as: Keyboard
[ 11.009] (II) event25 - Asus Keyboard: device is a keyboard
[ 11.010] (**) Asus Keyboard: Applying InputClass "devname"
[ 11.010] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 11.010] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 11.010] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 11.010] (**) Asus Keyboard: always reports core events
[ 11.010] (**) Option "Device" "/dev/input/event25"
[ 11.010] (II) libinput: Asus Keyboard: is a virtual subdevice
[ 11.010] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:0B05:1866.0008/input/input50/event25"
[ 11.010] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: KEYBOARD, id 29)
[ 11.010] (**) Option "xkb_layout" "es"
[ 11.011] (II) config/udev: removing device Asus Keyboard
[ 11.011] (II) event20 - Asus Keyboard: device removed
[ 11.043] (II) UnloadModule: "libinput"
[ 11.044] (II) config/udev: Adding input device Asus Keyboard (/dev/input/event20)
[ 11.044] (**) Asus Keyboard: Applying InputClass "devname"
[ 11.044] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 11.044] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 11.044] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 11.044] (**) Asus Keyboard: always reports core events
[ 11.044] (**) Option "Device" "/dev/input/event20"
[ 11.045] (II) event20 - Asus Keyboard: is tagged by udev as: Keyboard
[ 11.045] (II) event20 - Asus Keyboard: device is a keyboard
[ 11.047] (II) event20 - Asus Keyboard: device removed
[ 11.076] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0B05:1866.0005/input/input43/event20"
[ 11.076] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: KEYBOARD, id 13)
[ 11.076] (**) Option "xkb_layout" "es"
[ 11.082] (II) event20 - Asus Keyboard: is tagged by udev as: Keyboard
[ 11.082] (II) event20 - Asus Keyboard: device is a keyboard
[ 11.092] (II) config/udev: Adding input device Logitech G305 (/dev/input/mouse2)
[ 11.092] (**) Logitech G305: Applying InputClass "devname"
[ 11.092] (**) Logitech G305: Applying InputClass "system-keyboard"
[ 11.092] (II) Using input driver 'libinput' for 'Logitech G305'
[ 11.092] (**) Logitech G305: always reports core events
[ 11.092] (**) Option "Device" "/dev/input/mouse2"
[ 11.166] (II) mouse2 - not using input device '/dev/input/mouse2'.
[ 11.166] (EE) libinput: Logitech G305: Failed to create a device for /dev/input/mouse2
[ 11.166] (EE) PreInit returned 2 for "Logitech G305"
[ 11.166] (II) UnloadModule: "libinput"
[ 11.168] (II) config/udev: Adding input device Logitech G305 (/dev/input/event23)
[ 11.168] (**) Logitech G305: Applying InputClass "devname"
[ 11.168] (**) Logitech G305: Applying InputClass "libinput pointer catchall"
[ 11.168] (**) Logitech G305: Applying InputClass "libinput keyboard catchall"
[ 11.168] (**) Logitech G305: Applying InputClass "system-keyboard"
[ 11.168] (II) Using input driver 'libinput' for 'Logitech G305'
[ 11.168] (**) Logitech G305: always reports core events
[ 11.168] (**) Option "Device" "/dev/input/event23"
[ 11.171] (II) event23 - Logitech G305: is tagged by udev as: Keyboard Mouse
[ 11.171] (II) event23 - Logitech G305: device is a pointer
[ 11.171] (II) event23 - Logitech G305: device is a keyboard
[ 11.172] (II) event23 - Logitech G305: device removed
[ 11.200] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 11.200] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 11.200] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 11.200] (II) libinput: Logitech G305: needs a virtual subdevice
[ 11.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.4/1-13.4:1.2/0003:046D:C53F.0009/0003:046D:4074.000E/input/input51/event23"
[ 11.200] (II) XINPUT: Adding extended input device "Logitech G305" (type: MOUSE, id 32)
[ 11.200] (**) Option "AccelerationScheme" "none"
[ 11.200] (**) Logitech G305: (accel) selected scheme none/0
[ 11.200] (**) Logitech G305: (accel) acceleration factor: 2.000
[ 11.200] (**) Logitech G305: (accel) acceleration threshold: 4
[ 11.201] (II) event23 - Logitech G305: is tagged by udev as: Keyboard Mouse
[ 11.202] (II) event23 - Logitech G305: device is a pointer
[ 11.202] (II) event23 - Logitech G305: device is a keyboard
[ 11.202] (**) Logitech G305: Applying InputClass "devname"
[ 11.202] (**) Logitech G305: Applying InputClass "libinput pointer catchall"
[ 11.202] (**) Logitech G305: Applying InputClass "libinput keyboard catchall"
[ 11.202] (**) Logitech G305: Applying InputClass "system-keyboard"
[ 11.202] (II) Using input driver 'libinput' for 'Logitech G305'
[ 11.202] (**) Logitech G305: always reports core events
[ 11.202] (**) Option "Device" "/dev/input/event23"
[ 11.202] (II) libinput: Logitech G305: is a virtual subdevice
[ 11.202] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 11.202] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 11.202] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 11.202] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.4/1-13.4:1.2/0003:046D:C53F.0009/0003:046D:4074.000E/input/input51/event23"
[ 11.202] (II) XINPUT: Adding extended input device "Logitech G305" (type: KEYBOARD, id 33)
[ 11.202] (**) Option "xkb_layout" "es"
[ 17.898] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 17.898] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 17.898] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 17.898] (--) NVIDIA(GPU-0):
[ 17.898] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 17.898] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 17.898] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 17.898] (--) NVIDIA(GPU-0):
[ 17.943] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 17.943] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 17.943] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 17.943] (--) NVIDIA(GPU-0):
[ 17.943] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 17.943] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 17.943] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 17.943] (--) NVIDIA(GPU-0):
[ 17.943] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 17.943] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 17.943] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 17.943] (--) NVIDIA(GPU-0):
[ 17.987] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 17.987] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 17.987] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 17.987] (--) NVIDIA(GPU-0):
[ 19.233] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 19.233] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 19.233] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 19.233] (--) NVIDIA(GPU-0):
[ 19.233] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 19.233] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 19.233] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 19.233] (--) NVIDIA(GPU-0):
[ 19.277] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 19.277] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 19.277] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 19.277] (--) NVIDIA(GPU-0):
[ 19.277] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 19.277] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 19.277] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 19.277] (--) NVIDIA(GPU-0):
[ 19.277] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 19.277] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 19.277] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 19.277] (--) NVIDIA(GPU-0):
[ 19.323] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 19.323] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 19.323] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 19.323] (--) NVIDIA(GPU-0):
[ 22.846] (II) event19 - C922 Pro Stream Webcam: device removed
[ 22.866] (II) config/udev: removing device C922 Pro Stream Webcam
[ 22.868] (II) UnloadModule: "libinput"
[ 22.879] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 22.879] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 22.879] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 22.879] (--) NVIDIA(GPU-0):
[ 22.879] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 22.879] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 22.879] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 22.879] (--) NVIDIA(GPU-0):
[ 22.924] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 22.924] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 22.924] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 22.924] (--) NVIDIA(GPU-0):
[ 22.924] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 22.924] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 22.924] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 22.924] (--) NVIDIA(GPU-0):
[ 22.924] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 22.924] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 22.924] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 22.924] (--) NVIDIA(GPU-0):
[ 22.969] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 22.969] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 22.969] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 22.969] (--) NVIDIA(GPU-0):
[ 23.195] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 23.195] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 23.195] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 23.195] (--) NVIDIA(GPU-0):
[ 23.195] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 23.195] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 23.195] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 23.195] (--) NVIDIA(GPU-0):
[ 23.240] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 23.240] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 23.240] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 23.240] (--) NVIDIA(GPU-0):
[ 23.240] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 23.240] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 23.240] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 23.240] (--) NVIDIA(GPU-0):
[ 23.240] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 23.240] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 23.240] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 23.240] (--) NVIDIA(GPU-0):
[ 23.283] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 23.283] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 23.283] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 23.283] (--) NVIDIA(GPU-0):
[ 25.797] (II) config/udev: Adding input device C922 Pro Stream Webcam (/dev/input/event19)
[ 25.797] (**) C922 Pro Stream Webcam: Applying InputClass "devname"
[ 25.797] (**) C922 Pro Stream Webcam: Applying InputClass "libinput keyboard catchall"
[ 25.797] (**) C922 Pro Stream Webcam: Applying InputClass "system-keyboard"
[ 25.797] (II) Using input driver 'libinput' for 'C922 Pro Stream Webcam'
[ 25.797] (**) C922 Pro Stream Webcam: always reports core events
[ 25.797] (**) Option "Device" "/dev/input/event19"
[ 25.799] (II) event19 - C922 Pro Stream Webcam: is tagged by udev as: Keyboard
[ 25.799] (II) event19 - C922 Pro Stream Webcam: device is a keyboard
[ 25.799] (II) event19 - C922 Pro Stream Webcam: device removed
[ 25.856] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input52/event19"
[ 25.856] (II) XINPUT: Adding extended input device "C922 Pro Stream Webcam" (type: KEYBOARD, id 23)
[ 25.856] (**) Option "xkb_layout" "es"
[ 25.858] (II) event19 - C922 Pro Stream Webcam: is tagged by udev as: Keyboard
[ 25.858] (II) event19 - C922 Pro Stream Webcam: device is a keyboard
[ 40.244] (II) event23 - Logitech G305: SYN_DROPPED event - some input events have been lost.
[ 40.331] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.331] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 40.331] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 40.331] (--) NVIDIA(GPU-0):
[ 40.331] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 40.331] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 40.331] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 40.331] (--) NVIDIA(GPU-0):
[ 40.376] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 40.376] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 40.376] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 40.376] (--) NVIDIA(GPU-0):
[ 40.376] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.376] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 40.376] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 40.376] (--) NVIDIA(GPU-0):
[ 40.376] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 40.376] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 40.376] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 40.376] (--) NVIDIA(GPU-0):
[ 40.422] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 40.422] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 40.422] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 40.422] (--) NVIDIA(GPU-0):
[ 40.451] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.452] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 40.452] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 40.452] (--) NVIDIA(GPU-0):
[ 40.452] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 40.452] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 40.452] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 40.452] (--) NVIDIA(GPU-0):
[ 40.495] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 40.495] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 40.495] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 40.495] (--) NVIDIA(GPU-0):
[ 40.496] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.496] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 40.496] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 40.496] (--) NVIDIA(GPU-0):
[ 40.496] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 40.496] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 40.496] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 40.496] (--) NVIDIA(GPU-0):
[ 40.542] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 40.542] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 40.542] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 40.542] (--) NVIDIA(GPU-0):
[ 40.553] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.553] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 40.553] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 40.553] (--) NVIDIA(GPU-0):
[ 40.553] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 40.553] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 40.553] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 40.553] (--) NVIDIA(GPU-0):
[ 40.597] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 40.597] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 40.597] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 40.597] (--) NVIDIA(GPU-0):
[ 40.597] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.597] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 40.597] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 40.597] (--) NVIDIA(GPU-0):
[ 40.597] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 40.597] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 40.597] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 40.597] (--) NVIDIA(GPU-0):
[ 40.641] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 40.641] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 40.641] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 40.641] (--) NVIDIA(GPU-0):
[ 40.656] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.656] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 40.656] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 40.656] (--) NVIDIA(GPU-0):
[ 40.656] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 40.656] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 40.656] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 40.656] (--) NVIDIA(GPU-0):
[ 40.703] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 40.703] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 40.703] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 40.703] (--) NVIDIA(GPU-0):
[ 40.703] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.703] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 40.703] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 40.703] (--) NVIDIA(GPU-0):
[ 40.703] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 40.703] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 40.703] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 40.703] (--) NVIDIA(GPU-0):
[ 40.748] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 40.748] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 40.748] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 40.748] (--) NVIDIA(GPU-0):
[ 40.752] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.752] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 40.752] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 40.752] (--) NVIDIA(GPU-0):
[ 40.753] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 40.753] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 40.753] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 40.753] (--) NVIDIA(GPU-0):
[ 40.798] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 40.798] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 40.798] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 40.798] (--) NVIDIA(GPU-0):
[ 40.798] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.798] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 40.798] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 40.798] (--) NVIDIA(GPU-0):
[ 40.798] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 40.798] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 40.798] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 40.798] (--) NVIDIA(GPU-0):
[ 40.847] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 40.847] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 40.847] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 40.847] (--) NVIDIA(GPU-0):Regular kernel:
[ 5.463] (--) Log file renamed from "/var/log/Xorg.pid-557.log" to "/var/log/Xorg.0.log"
[ 5.465]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 5.465] Current Operating System: Linux abigail-pc 6.4.4-arch1-1 #1 SMP PREEMPT_DYNAMIC Wed, 19 Jul 2023 19:19:38 +0000 x86_64
[ 5.465] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0d53bca8-e20e-435e-897d-02f62aa7231c rw resume=UUID=6d3036ed-f7c0-4d3a-8097-6b0625f71acc loglevel=3 nowatchdog nvme_load=YES nvidia-drm.modeset=1
[ 5.465]
[ 5.465] Current version of pixman: 0.42.2
[ 5.465] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.465] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.465] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 22 20:15:38 2023
[ 5.467] (==) Using config file: "/etc/X11/xorg.conf"
[ 5.467] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.467] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.469] (==) No Layout section. Using the first Screen section.
[ 5.469] (==) No screen section available. Using defaults.
[ 5.469] (**) |-->Screen "Default Screen Section" (0)
[ 5.469] (**) | |-->Monitor "<default monitor>"
[ 5.469] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 5.469] (**) | |-->Device "nvidia"
[ 5.469] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.469] (==) Automatically adding devices
[ 5.469] (==) Automatically enabling devices
[ 5.469] (==) Automatically adding GPU devices
[ 5.469] (==) Automatically binding GPU devices
[ 5.469] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5.469] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 5.469] Entry deleted from font path.
[ 5.470] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 5.470] Entry deleted from font path.
[ 5.470] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 5.470] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 5.470] Entry deleted from font path.
[ 5.470] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 5.470] Entry deleted from font path.
[ 5.470] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 5.470] Entry deleted from font path.
[ 5.470] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 5.470] Entry deleted from font path.
[ 5.470] (==) FontPath set to:
[ 5.470] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.470] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.470] (II) Module ABI versions:
[ 5.470] X.Org ANSI C Emulation: 0.4
[ 5.470] X.Org Video Driver: 25.2
[ 5.470] X.Org XInput driver : 24.4
[ 5.470] X.Org Server Extension : 10.0
[ 5.472] (++) using VT number 2
[ 5.472] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5.476] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.476] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 5.505] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 5.505] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 5.506] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 5.508] (--) PCI:*(0@0:2:0) 8086:3e9b:1043:1711 rev 0, Mem @ 0xa3000000/16777216, 0x80000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[ 5.508] (--) PCI: (1@0:0:0) 10de:1f11:1043:1f8e rev 161, Mem @ 0xa4000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 5.508] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5.508] (II) "glx" will be loaded by default.
[ 5.508] (II) LoadModule: "modesetting"
[ 5.511] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.514] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.514] compiled for 1.21.1.8, module version = 1.21.1
[ 5.514] Module class: X.Org Video Driver
[ 5.514] ABI class: X.Org Video Driver, version 25.2
[ 5.514] (II) LoadModule: "glx"
[ 5.515] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.524] (II) Module glx: vendor="X.Org Foundation"
[ 5.524] compiled for 1.21.1.8, module version = 1.0.0
[ 5.524] ABI class: X.Org Server Extension, version 10.0
[ 5.524] (II) LoadModule: "nvidia"
[ 5.524] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5.531] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5.531] compiled for 1.6.99.901, module version = 1.0.0
[ 5.531] Module class: X.Org Video Driver
[ 5.532] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.532] (II) NVIDIA dlloader X Driver 535.86.05 Fri Jul 14 20:26:08 UTC 2023
[ 5.532] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 5.532] (WW) Falling back to old probe method for modesetting
[ 5.533] (II) Loading sub module "fb"
[ 5.533] (II) LoadModule: "fb"
[ 5.533] (II) Module "fb" already built-in
[ 5.533] (II) Loading sub module "wfb"
[ 5.533] (II) LoadModule: "wfb"
[ 5.533] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5.534] (II) Module wfb: vendor="X.Org Foundation"
[ 5.534] compiled for 1.21.1.8, module version = 1.0.0
[ 5.534] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.535] (II) modeset(G0): using drv /dev/dri/card1
[ 5.535] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.535] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 5.535] (==) NVIDIA(0): RGB weight 888
[ 5.535] (==) NVIDIA(0): Default visual is TrueColor
[ 5.535] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.535] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 5.535] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 5.536] (**) NVIDIA(0): Enabling 2D acceleration
[ 5.536] (II) Loading sub module "glxserver_nvidia"
[ 5.536] (II) LoadModule: "glxserver_nvidia"
[ 5.536] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 5.617] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 5.617] compiled for 1.6.99.901, module version = 1.0.0
[ 5.617] Module class: X.Org Server Extension
[ 5.617] (II) NVIDIA GLX Module 535.86.05 Fri Jul 14 20:27:17 UTC 2023
[ 5.619] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 5.622] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 5.622] (--) NVIDIA(0): DFP-0
[ 5.622] (--) NVIDIA(0): DFP-1
[ 5.622] (--) NVIDIA(0): DFP-2 (boot)
[ 5.625] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 2060 (TU106-A) at PCI:1:0:0
[ 5.625] (II) NVIDIA(0): (GPU-0)
[ 5.625] (--) NVIDIA(0): Memory: 6291456 kBytes
[ 5.625] (--) NVIDIA(0): VideoBIOS: 90.06.2d.00.d3
[ 5.625] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 5.625] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 5.625] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 5.625] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 5.625] (--) NVIDIA(GPU-0):
[ 5.626] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 5.626] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 5.626] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 5.626] (--) NVIDIA(GPU-0):
[ 5.670] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 5.670] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 5.670] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 5.670] (--) NVIDIA(GPU-0):
[ 5.728] (==) NVIDIA(0):
[ 5.728] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 5.728] (==) NVIDIA(0): will be used as the requested mode.
[ 5.728] (==) NVIDIA(0):
[ 5.733] (II) NVIDIA(0): Validated MetaModes:
[ 5.733] (II) NVIDIA(0): "DFP-2:nvidia-auto-select"
[ 5.733] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 5.905] (--) NVIDIA(0): DPI set to (81, 80); computed from "UseEdidDpi" X config
[ 5.905] (--) NVIDIA(0): option
[ 5.905] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 5.905] (==) modeset(G0): RGB weight 888
[ 5.905] (==) modeset(G0): Default visual is TrueColor
[ 5.905] (II) Loading sub module "glamoregl"
[ 5.905] (II) LoadModule: "glamoregl"
[ 5.905] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.912] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.912] compiled for 1.21.1.8, module version = 1.0.1
[ 5.912] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.417] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics 630 (CFL GT2)
[ 6.417] (II) modeset(G0): glamor initialized
[ 6.420] (II) modeset(G0): Output eDP-1-1 has no monitor section
[ 6.424] (II) modeset(G0): EDID for output eDP-1-1
[ 6.424] (II) modeset(G0): Manufacturer: AUO Model: 82ed Serial#: 0
[ 6.424] (II) modeset(G0): Year: 2018 Week: 10
[ 6.424] (II) modeset(G0): EDID Version: 1.4
[ 6.424] (II) modeset(G0): Digital Display Input
[ 6.424] (II) modeset(G0): 8 bits per channel
[ 6.424] (II) modeset(G0): Digital interface is DisplayPort
[ 6.424] (II) modeset(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 6.424] (II) modeset(G0): Gamma: 2.20
[ 6.424] (II) modeset(G0): No DPMS capabilities specified
[ 6.424] (II) modeset(G0): Supported color encodings: RGB 4:4:4
[ 6.424] (II) modeset(G0): First detailed timing is preferred mode
[ 6.424] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[ 6.424] (II) modeset(G0): redX: 0.642 redY: 0.338 greenX: 0.322 greenY: 0.611
[ 6.424] (II) modeset(G0): blueX: 0.153 blueY: 0.046 whiteX: 0.313 whiteY: 0.329
[ 6.424] (II) modeset(G0): Manufacturer's mask: 0
[ 6.424] (II) modeset(G0): Supported detailed timing:
[ 6.424] (II) modeset(G0): clock: 368.1 MHz Image Size: 344 x 194 mm
[ 6.424] (II) modeset(G0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2102 h_border: 0
[ 6.424] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1095 v_blanking: 1216 v_border: 0
[ 6.424] (II) modeset(G0): Supported detailed timing:
[ 6.424] (II) modeset(G0): clock: 368.1 MHz Image Size: 344 x 193 mm
[ 6.424] (II) modeset(G0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2102 h_border: 0
[ 6.425] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1095 v_blanking: 2915 v_border: 0
[ 6.425] (II) modeset(G0): AUO
[ 6.425] (II) modeset(G0): B156HAN08.2
[ 6.425] (II) modeset(G0): EDID (in hex):
[ 6.425] (II) modeset(G0): 00ffffffffffff0006afed8200000000
[ 6.425] (II) modeset(G0): 0a1c0104a5221378026a75a456529c27
[ 6.425] (II) modeset(G0): 0b505400000001010101010101010101
[ 6.425] (II) modeset(G0): 010101010101ce8f80b6703888403020
[ 6.425] (II) modeset(G0): a50058c210000000ce8f80b670382b47
[ 6.425] (II) modeset(G0): 3020a50058c110000000000000fe0041
[ 6.425] (II) modeset(G0): 554f0a202020202020202020000000fe
[ 6.425] (II) modeset(G0): 004231353648414e30382e32200a0017
[ 6.425] (II) modeset(G0): Printing probed modes for output eDP-1-1
[ 6.425] (II) modeset(G0): Modeline "15360x8640"x60.0 11669.25 15360 16824 18560 21760 8640 8643 8648 8938 -hsync +vsync (536.3 kHz d)
[ 6.425] (II) modeset(G0): Modeline "15360x8640"x60.0 8273.75 15360 15408 15440 15520 8640 8643 8648 8886 +hsync -vsync (533.1 kHz d)
[ 6.425] (II) modeset(G0): Modeline "7680x4320"x120.0 5834.62 7680 8412 9280 10880 4320 4321 4324 4469 doublescan -hsync +vsync (536.3 kHz d)
[ 6.426] (II) modeset(G0): Modeline "7680x4320"x120.0 4136.88 7680 7704 7720 7760 4320 4321 4324 4443 doublescan +hsync -vsync (533.1 kHz d)
[ 6.426] (II) modeset(G0): Modeline "7680x4320"x60.0 2892.50 7680 8376 9232 10784 4320 4323 4328 4471 -hsync +vsync (268.2 kHz d)
[ 6.426] (II) modeset(G0): Modeline "7680x4320"x60.0 2089.75 7680 7728 7760 7840 4320 4323 4328 4443 +hsync -vsync (266.5 kHz d)
[ 6.426] (II) modeset(G0): Modeline "5120x2880"x60.0 1276.50 5120 5560 6128 7136 2880 2883 2888 2982 -hsync +vsync (178.9 kHz d)
[ 6.426] (II) modeset(G0): Modeline "5120x2880"x60.0 938.25 5120 5168 5200 5280 2880 2883 2888 2962 +hsync -vsync (177.7 kHz d)
[ 6.426] (II) modeset(G0): Modeline "4096x2304"x60.0 813.00 4096 4440 4888 5680 2304 2307 2312 2386 -hsync +vsync (143.1 kHz d)
[ 6.426] (II) modeset(G0): Modeline "4096x2304"x60.0 605.00 4096 4144 4176 4256 2304 2307 2312 2370 +hsync -vsync (142.2 kHz d)
[ 6.426] (II) modeset(G0): Modeline "3840x2160"x120.0 1446.25 3840 4188 4616 5392 2160 2161 2164 2235 doublescan -hsync +vsync (268.2 kHz d)
[ 6.426] (II) modeset(G0): Modeline "3840x2160"x120.0 1044.88 3840 3864 3880 3920 2160 2161 2164 2221 doublescan +hsync -vsync (266.5 kHz d)
[ 6.426] (II) modeset(G0): Modeline "3840x2160"x60.0 712.75 3840 4160 4576 5312 2160 2163 2168 2237 -hsync +vsync (134.2 kHz d)
[ 6.426] (II) modeset(G0): Modeline "3840x2160"x60.0 533.00 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.2 kHz d)
[ 6.426] (II) modeset(G0): Modeline "3200x1800"x60.0 492.00 3200 3456 3800 4400 1800 1803 1808 1865 -hsync +vsync (111.8 kHz d)
[ 6.426] (II) modeset(G0): Modeline "3200x1800"x59.9 373.00 3200 3248 3280 3360 1800 1803 1808 1852 +hsync -vsync (111.0 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2880x1620"x60.0 396.25 2880 3096 3408 3936 1620 1623 1628 1679 -hsync +vsync (100.7 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2880x1620"x60.0 303.75 2880 2928 2960 3040 1620 1623 1628 1666 +hsync -vsync (99.9 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2560x1600"x60.0 348.50 2560 2760 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2560x1600"x60.0 268.50 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.7 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2560x1440"x120.0 638.25 2560 2780 3064 3568 1440 1441 1444 1491 doublescan -hsync +vsync (178.9 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2560x1440"x120.0 469.12 2560 2584 2600 2640 1440 1441 1444 1481 doublescan +hsync -vsync (177.7 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2560x1440"x60.0 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync (89.5 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2048x1152"x120.0 406.50 2048 2220 2444 2840 1152 1153 1156 1193 doublescan -hsync +vsync (143.1 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2048x1152"x120.0 302.50 2048 2072 2088 2128 1152 1153 1156 1185 doublescan +hsync -vsync (142.2 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2048x1152"x59.9 197.00 2048 2184 2400 2752 1152 1155 1160 1195 -hsync +vsync (71.6 kHz d)
[ 6.426] (II) modeset(G0): Modeline "2048x1152"x59.9 156.75 2048 2096 2128 2208 1152 1155 1160 1185 +hsync -vsync (71.0 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 6.426] (II) modeset(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 6.427] (II) modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 6.427] (II) modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 6.427] (II) modeset(G0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 6.427] (II) modeset(G0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 6.427] (II) modeset(G0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 6.427] (II) modeset(G0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 6.427] (II) modeset(G0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 6.427] (II) modeset(G0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 6.427] (II) modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 6.427] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 6.427] (II) modeset(G0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 6.427] (II) modeset(G0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 6.427] (II) modeset(G0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 6.427] (II) modeset(G0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 6.427] (II) modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 6.427] (II) modeset(G0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 6.427] (II) modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 6.427] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 6.427] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 6.427] (II) modeset(G0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 6.427] (II) modeset(G0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 6.428] (II) modeset(G0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 6.428] (II) modeset(G0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 6.428] (II) modeset(G0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 6.428] (II) modeset(G0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 6.428] (II) modeset(G0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 6.428] (II) modeset(G0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 6.428] (II) modeset(G0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 6.428] (II) modeset(G0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 6.428] (II) modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 6.428] (II) modeset(G0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 6.428] (II) modeset(G0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 6.428] (II) modeset(G0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 6.428] (II) modeset(G0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 6.428] (II) modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 6.428] (II) modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 6.428] (II) modeset(G0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 6.428] (II) modeset(G0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 6.428] (II) modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 6.428] (II) modeset(G0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 6.428] (II) modeset(G0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 6.428] (II) modeset(G0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 6.428] (II) modeset(G0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 6.428] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 6.428] (==) modeset(G0): DPI set to (96, 96)
[ 6.428] (II) Loading sub module "fb"
[ 6.428] (II) LoadModule: "fb"
[ 6.428] (II) Module "fb" already built-in
[ 6.429] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 6.429] (II) NVIDIA: access.
[ 6.441] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 6.441] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 6.441] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 6.441] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 6.441] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 6.441] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 6.441] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 6.441] (II) NVIDIA(0): Config Options in the README.
[ 6.463] (II) NVIDIA(0): Setting mode "DFP-2:nvidia-auto-select"
[ 6.502] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 6.502] (==) NVIDIA(0): Backing store enabled
[ 6.502] (==) NVIDIA(0): Silken mouse enabled
[ 6.503] (==) NVIDIA(0): DPMS enabled
[ 6.508] (II) Loading sub module "dri2"
[ 6.508] (II) LoadModule: "dri2"
[ 6.508] (II) Module "dri2" already built-in
[ 6.508] (II) NVIDIA(0): [DRI2] Setup complete
[ 6.508] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 6.535] (==) modeset(G0): Backing store enabled
[ 6.535] (==) modeset(G0): Silken mouse enabled
[ 6.535] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 6.535] (==) modeset(G0): DPMS enabled
[ 6.535] (II) modeset(G0): [DRI2] Setup complete
[ 6.535] (II) modeset(G0): [DRI2] DRI driver: iris
[ 6.535] (II) modeset(G0): [DRI2] VDPAU driver: va_gl
[ 6.535] (II) modeset(G0): Disable reverse prime offload mode for i915.
[ 6.535] (II) Initializing extension Generic Event Extension
[ 6.535] (II) Initializing extension SHAPE
[ 6.535] (II) Initializing extension MIT-SHM
[ 6.536] (II) Initializing extension XInputExtension
[ 6.536] (II) Initializing extension XTEST
[ 6.536] (II) Initializing extension BIG-REQUESTS
[ 6.536] (II) Initializing extension SYNC
[ 6.536] (II) Initializing extension XKEYBOARD
[ 6.536] (II) Initializing extension XC-MISC
[ 6.536] (II) Initializing extension SECURITY
[ 6.536] (II) Initializing extension XFIXES
[ 6.536] (II) Initializing extension RENDER
[ 6.536] (II) Initializing extension RANDR
[ 6.536] (II) Initializing extension COMPOSITE
[ 6.536] (II) Initializing extension DAMAGE
[ 6.536] (II) Initializing extension MIT-SCREEN-SAVER
[ 6.537] (II) Initializing extension DOUBLE-BUFFER
[ 6.537] (II) Initializing extension RECORD
[ 6.537] (II) Initializing extension DPMS
[ 6.537] (II) Initializing extension Present
[ 6.537] (II) Initializing extension DRI3
[ 6.537] (II) Initializing extension X-Resource
[ 6.537] (II) Initializing extension XVideo
[ 6.537] (II) Initializing extension XVideo-MotionCompensation
[ 6.537] (II) Initializing extension GLX
[ 6.537] (II) Initializing extension GLX
[ 6.537] (II) Indirect GLX disabled.
[ 6.538] (II) GLX: Another vendor is already registered for screen 0
[ 6.538] (II) Initializing extension XFree86-VidModeExtension
[ 6.538] (II) Initializing extension XFree86-DGA
[ 6.538] (II) Initializing extension XFree86-DRI
[ 6.538] (II) Initializing extension DRI2
[ 6.538] (II) Initializing extension NV-GLX
[ 6.538] (II) Initializing extension NV-CONTROL
[ 6.538] (II) Initializing extension XINERAMA
[ 6.538] (II) modeset(G0): Damage tracking initialized
[ 6.674] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 6.674] (**) Power Button: Applying InputClass "devname"
[ 6.674] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.674] (**) Power Button: Applying InputClass "system-keyboard"
[ 6.674] (II) LoadModule: "libinput"
[ 6.675] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 6.679] (II) Module libinput: vendor="X.Org Foundation"
[ 6.679] compiled for 1.21.1.8, module version = 1.3.0
[ 6.679] Module class: X.Org XInput Driver
[ 6.679] ABI class: X.Org XInput driver, version 24.4
[ 6.679] (II) Using input driver 'libinput' for 'Power Button'
[ 6.679] (**) Power Button: always reports core events
[ 6.679] (**) Option "Device" "/dev/input/event3"
[ 6.687] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 6.687] (II) event3 - Power Button: device is a keyboard
[ 6.687] (II) event3 - Power Button: device removed
[ 6.716] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 6.716] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.716] (**) Option "xkb_layout" "es"
[ 6.732] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 6.732] (II) event3 - Power Button: device is a keyboard
[ 6.733] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event5)
[ 6.733] (**) Asus Wireless Radio Control: Applying InputClass "devname"
[ 6.733] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 6.733] (**) Asus Wireless Radio Control: Applying InputClass "system-keyboard"
[ 6.733] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 6.733] (**) Asus Wireless Radio Control: always reports core events
[ 6.733] (**) Option "Device" "/dev/input/event5"
[ 6.733] (II) event5 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 6.734] (II) event5 - Asus Wireless Radio Control: device is a keyboard
[ 6.734] (II) event5 - Asus Wireless Radio Control: device removed
[ 6.786] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5/event5"
[ 6.786] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 6.786] (**) Option "xkb_layout" "es"
[ 6.789] (II) event5 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 6.790] (II) event5 - Asus Wireless Radio Control: device is a keyboard
[ 6.792] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 6.792] (**) Video Bus: Applying InputClass "devname"
[ 6.792] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 6.792] (**) Video Bus: Applying InputClass "system-keyboard"
[ 6.792] (II) Using input driver 'libinput' for 'Video Bus'
[ 6.792] (**) Video Bus: always reports core events
[ 6.792] (**) Option "Device" "/dev/input/event14"
[ 6.795] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[ 6.795] (II) event14 - Video Bus: device is a keyboard
[ 6.795] (II) event14 - Video Bus: device removed
[ 6.830] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event14"
[ 6.830] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 6.830] (**) Option "xkb_layout" "es"
[ 6.833] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[ 6.833] (II) event14 - Video Bus: device is a keyboard
[ 6.836] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 6.836] (**) Video Bus: Applying InputClass "devname"
[ 6.836] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 6.836] (**) Video Bus: Applying InputClass "system-keyboard"
[ 6.836] (II) Using input driver 'libinput' for 'Video Bus'
[ 6.836] (**) Video Bus: always reports core events
[ 6.836] (**) Option "Device" "/dev/input/event15"
[ 6.839] (II) event15 - Video Bus: is tagged by udev as: Keyboard
[ 6.840] (II) event15 - Video Bus: device is a keyboard
[ 6.840] (II) event15 - Video Bus: device removed
[ 6.913] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input17/event15"
[ 6.913] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 6.913] (**) Option "xkb_layout" "es"
[ 6.914] (II) event15 - Video Bus: is tagged by udev as: Keyboard
[ 6.914] (II) event15 - Video Bus: device is a keyboard
[ 6.915] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 6.915] (**) Lid Switch: Applying InputClass "devname"
[ 6.915] (II) Using input driver 'libinput' for 'Lid Switch'
[ 6.915] (**) Lid Switch: always reports core events
[ 6.915] (**) Option "Device" "/dev/input/event0"
[ 6.916] (II) event0 - Lid Switch: is tagged by udev as: Switch
[ 6.916] (II) event0 - Lid Switch: device is a switch device
[ 6.916] (II) event0 - Lid Switch: device removed
[ 6.963] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/PNP0C09:01/PNP0C0D:00/input/input0/event0"
[ 6.963] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 10)
[ 6.964] (II) event0 - Lid Switch: is tagged by udev as: Switch
[ 6.964] (II) event0 - Lid Switch: device is a switch device
[ 6.965] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.965] (**) Power Button: Applying InputClass "devname"
[ 6.965] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.965] (**) Power Button: Applying InputClass "system-keyboard"
[ 6.965] (II) Using input driver 'libinput' for 'Power Button'
[ 6.965] (**) Power Button: always reports core events
[ 6.965] (**) Option "Device" "/dev/input/event2"
[ 6.965] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 6.965] (II) event2 - Power Button: device is a keyboard
[ 6.965] (II) event2 - Power Button: device removed
[ 7.006] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 7.006] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 11)
[ 7.006] (**) Option "xkb_layout" "es"
[ 7.008] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 7.008] (II) event2 - Power Button: device is a keyboard
[ 7.009] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 7.009] (**) Sleep Button: Applying InputClass "devname"
[ 7.009] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 7.009] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 7.009] (II) Using input driver 'libinput' for 'Sleep Button'
[ 7.009] (**) Sleep Button: always reports core events
[ 7.010] (**) Option "Device" "/dev/input/event1"
[ 7.011] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 7.011] (II) event1 - Sleep Button: device is a keyboard
[ 7.012] (II) event1 - Sleep Button: device removed
[ 7.060] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 7.060] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 12)
[ 7.060] (**) Option "xkb_layout" "es"
[ 7.064] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 7.064] (II) event1 - Sleep Button: device is a keyboard
[ 7.067] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[ 7.067] (**) HDA NVidia HDMI/DP,pcm=3: Applying InputClass "devname"
[ 7.067] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=3'
[ 7.067] (**) HDA NVidia HDMI/DP,pcm=3: always reports core events
[ 7.067] (**) Option "Device" "/dev/input/event10"
[ 7.070] (II) event10 - HDA NVidia HDMI/DP,pcm=3: is tagged by udev as: Switch
[ 7.160] (II) event10 - not using input device '/dev/input/event10'.
[ 7.160] (EE) libinput: HDA NVidia HDMI/DP,pcm=3: Failed to create a device for /dev/input/event10
[ 7.160] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=3"
[ 7.160] (II) UnloadModule: "libinput"
[ 7.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[ 7.161] (**) HDA NVidia HDMI/DP,pcm=7: Applying InputClass "devname"
[ 7.161] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=7'
[ 7.161] (**) HDA NVidia HDMI/DP,pcm=7: always reports core events
[ 7.161] (**) Option "Device" "/dev/input/event11"
[ 7.164] (II) event11 - HDA NVidia HDMI/DP,pcm=7: is tagged by udev as: Switch
[ 7.210] (II) event11 - not using input device '/dev/input/event11'.
[ 7.210] (EE) libinput: HDA NVidia HDMI/DP,pcm=7: Failed to create a device for /dev/input/event11
[ 7.210] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=7"
[ 7.210] (II) UnloadModule: "libinput"
[ 7.211] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[ 7.211] (**) HDA NVidia HDMI/DP,pcm=8: Applying InputClass "devname"
[ 7.211] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=8'
[ 7.211] (**) HDA NVidia HDMI/DP,pcm=8: always reports core events
[ 7.211] (**) Option "Device" "/dev/input/event12"
[ 7.214] (II) event12 - HDA NVidia HDMI/DP,pcm=8: is tagged by udev as: Switch
[ 7.263] (II) event12 - not using input device '/dev/input/event12'.
[ 7.263] (EE) libinput: HDA NVidia HDMI/DP,pcm=8: Failed to create a device for /dev/input/event12
[ 7.263] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=8"
[ 7.263] (II) UnloadModule: "libinput"
[ 7.265] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 7.265] (**) HDA NVidia HDMI/DP,pcm=9: Applying InputClass "devname"
[ 7.265] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=9'
[ 7.265] (**) HDA NVidia HDMI/DP,pcm=9: always reports core events
[ 7.265] (**) Option "Device" "/dev/input/event13"
[ 7.268] (II) event13 - HDA NVidia HDMI/DP,pcm=9: is tagged by udev as: Switch
[ 7.326] (II) event13 - not using input device '/dev/input/event13'.
[ 7.326] (EE) libinput: HDA NVidia HDMI/DP,pcm=9: Failed to create a device for /dev/input/event13
[ 7.326] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=9"
[ 7.326] (II) UnloadModule: "libinput"
[ 7.335] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event22)
[ 7.335] (**) Logitech USB Receiver: Applying InputClass "devname"
[ 7.335] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 7.335] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[ 7.335] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 7.335] (**) Logitech USB Receiver: always reports core events
[ 7.335] (**) Option "Device" "/dev/input/event22"
[ 7.337] (II) event22 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 7.337] (II) event22 - Logitech USB Receiver: device is a keyboard
[ 7.338] (II) event22 - Logitech USB Receiver: device removed
[ 7.373] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.0/0003:046D:C548.0005/input/input25/event22"
[ 7.373] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[ 7.373] (**) Option "xkb_layout" "es"
[ 7.375] (II) event22 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 7.375] (II) event22 - Logitech USB Receiver: device is a keyboard
[ 7.376] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event24)
[ 7.376] (**) Logitech USB Receiver Mouse: Applying InputClass "devname"
[ 7.376] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[ 7.376] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[ 7.376] (**) Logitech USB Receiver Mouse: always reports core events
[ 7.376] (**) Option "Device" "/dev/input/event24"
[ 7.378] (II) event24 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 7.379] (II) event24 - Logitech USB Receiver Mouse: device is a pointer
[ 7.379] (II) event24 - Logitech USB Receiver Mouse: device removed
[ 7.470] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.470] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.470] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.470] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.0007/input/input27/event24"
[ 7.470] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 14)
[ 7.470] (**) Option "AccelerationScheme" "none"
[ 7.470] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[ 7.470] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[ 7.470] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[ 7.473] (II) event24 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 7.474] (II) event24 - Logitech USB Receiver Mouse: device is a pointer
[ 7.475] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse2)
[ 7.475] (**) Logitech USB Receiver Mouse: Applying InputClass "devname"
[ 7.475] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[ 7.475] (**) Logitech USB Receiver Mouse: always reports core events
[ 7.475] (**) Option "Device" "/dev/input/mouse2"
[ 7.543] (II) mouse2 - not using input device '/dev/input/mouse2'.
[ 7.543] (EE) libinput: Logitech USB Receiver Mouse: Failed to create a device for /dev/input/mouse2
[ 7.543] (EE) PreInit returned 2 for "Logitech USB Receiver Mouse"
[ 7.543] (II) UnloadModule: "libinput"
[ 7.547] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event25)
[ 7.547] (**) Logitech USB Receiver Consumer Control: Applying InputClass "devname"
[ 7.547] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 7.547] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[ 7.547] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 7.547] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 7.547] (**) Option "Device" "/dev/input/event25"
[ 7.553] (II) event25 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 7.553] (II) event25 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 7.554] (II) event25 - Logitech USB Receiver Consumer Control: device removed
[ 7.603] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[ 7.603] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.0007/input/input28/event25"
[ 7.603] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 15)
[ 7.603] (**) Option "AccelerationScheme" "none"
[ 7.603] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[ 7.603] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 7.603] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[ 7.604] (II) event25 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 7.604] (II) event25 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 7.605] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event27)
[ 7.605] (**) Logitech USB Receiver System Control: Applying InputClass "devname"
[ 7.605] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[ 7.605] (**) Logitech USB Receiver System Control: Applying InputClass "system-keyboard"
[ 7.605] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[ 7.605] (**) Logitech USB Receiver System Control: always reports core events
[ 7.605] (**) Option "Device" "/dev/input/event27"
[ 7.607] (II) event27 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 7.607] (II) event27 - Logitech USB Receiver System Control: device is a keyboard
[ 7.607] (II) event27 - Logitech USB Receiver System Control: device removed
[ 7.677] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.0007/input/input29/event27"
[ 7.677] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 16)
[ 7.677] (**) Option "xkb_layout" "es"
[ 7.684] (II) event27 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 7.685] (II) event27 - Logitech USB Receiver System Control: device is a keyboard
[ 7.689] (II) config/udev: Adding input device Kingston HyperX Cloud II Wireless Consumer Control (/dev/input/event21)
[ 7.689] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "devname"
[ 7.689] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 7.689] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "system-keyboard"
[ 7.689] (II) Using input driver 'libinput' for 'Kingston HyperX Cloud II Wireless Consumer Control'
[ 7.689] (**) Kingston HyperX Cloud II Wireless Consumer Control: always reports core events
[ 7.689] (**) Option "Device" "/dev/input/event21"
[ 7.693] (II) event21 - Kingston HyperX Cloud II Wireless Consumer Control: is tagged by udev as: Keyboard
[ 7.694] (II) event21 - Kingston HyperX Cloud II Wireless Consumer Control: device is a keyboard
[ 7.694] (II) event21 - Kingston HyperX Cloud II Wireless Consumer Control: device removed
[ 7.773] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2:1.3/0003:0951:1718.000A/input/input34/event21"
[ 7.773] (II) XINPUT: Adding extended input device "Kingston HyperX Cloud II Wireless Consumer Control" (type: KEYBOARD, id 17)
[ 7.773] (**) Option "xkb_layout" "es"
[ 7.776] (II) event21 - Kingston HyperX Cloud II Wireless Consumer Control: is tagged by udev as: Keyboard
[ 7.776] (II) event21 - Kingston HyperX Cloud II Wireless Consumer Control: device is a keyboard
[ 7.777] (II) config/udev: Adding input device Kingston HyperX Cloud II Wireless (/dev/input/event256)
[ 7.777] (**) Kingston HyperX Cloud II Wireless: Applying InputClass "devname"
[ 7.777] (II) Using input driver 'libinput' for 'Kingston HyperX Cloud II Wireless'
[ 7.777] (**) Kingston HyperX Cloud II Wireless: always reports core events
[ 7.777] (**) Option "Device" "/dev/input/event256"
[ 7.780] (II) event256 - Kingston HyperX Cloud II Wireless: not tagged as supported input device
[ 7.850] (II) event256 - not using input device '/dev/input/event256'.
[ 7.850] (EE) libinput: Kingston HyperX Cloud II Wireless: Failed to create a device for /dev/input/event256
[ 7.850] (EE) PreInit returned 2 for "Kingston HyperX Cloud II Wireless"
[ 7.850] (II) UnloadModule: "libinput"
[ 7.853] (II) config/udev: Adding input device Kingston HyperX QuadCast S Consumer Control (/dev/input/event18)
[ 7.853] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 7.853] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 7.853] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 7.853] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 7.853] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 7.853] (**) Option "Device" "/dev/input/event18"
[ 7.858] (II) event18 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 7.858] (II) event18 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 7.859] (II) event18 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 7.903] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.3/0003:0951:171D.0002/input/input20/event18"
[ 7.903] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: KEYBOARD, id 18)
[ 7.903] (**) Option "xkb_layout" "es"
[ 7.908] (II) event18 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 7.909] (II) event18 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 7.912] (II) config/udev: Adding input device Kingston HyperX QuadCast S Consumer Control (/dev/input/event19)
[ 7.912] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 7.912] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 7.912] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 7.912] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 7.913] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 7.913] (**) Option "Device" "/dev/input/event19"
[ 7.918] (II) event19 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 7.918] (II) event19 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 7.918] (II) event19 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 7.950] (II) libinput: Kingston HyperX QuadCast S Consumer Control: needs a virtual subdevice
[ 7.950] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:0951:171F.0003/input/input22/event19"
[ 7.950] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: MOUSE, id 19)
[ 7.950] (**) Option "AccelerationScheme" "none"
[ 7.950] (**) Kingston HyperX QuadCast S Consumer Control: (accel) selected scheme none/0
[ 7.950] (**) Kingston HyperX QuadCast S Consumer Control: (accel) acceleration factor: 2.000
[ 7.950] (**) Kingston HyperX QuadCast S Consumer Control: (accel) acceleration threshold: 4
[ 7.955] (II) event19 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 7.955] (II) event19 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 7.959] (II) config/udev: Adding input device Kingston HyperX QuadCast S (/dev/input/event20)
[ 7.959] (**) Kingston HyperX QuadCast S: Applying InputClass "devname"
[ 7.959] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S'
[ 7.959] (**) Kingston HyperX QuadCast S: always reports core events
[ 7.959] (**) Option "Device" "/dev/input/event20"
[ 7.964] (II) event20 - Kingston HyperX QuadCast S: not tagged as supported input device
[ 8.023] (II) event20 - not using input device '/dev/input/event20'.
[ 8.023] (EE) libinput: Kingston HyperX QuadCast S: Failed to create a device for /dev/input/event20
[ 8.023] (EE) PreInit returned 2 for "Kingston HyperX QuadCast S"
[ 8.023] (II) UnloadModule: "libinput"
[ 8.026] (II) config/udev: Adding input device ELAN1200:00 04F3:307A Mouse (/dev/input/event8)
[ 8.026] (**) ELAN1200:00 04F3:307A Mouse: Applying InputClass "devname"
[ 8.026] (**) ELAN1200:00 04F3:307A Mouse: Applying InputClass "libinput pointer catchall"
[ 8.026] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:307A Mouse'
[ 8.026] (**) ELAN1200:00 04F3:307A Mouse: always reports core events
[ 8.026] (**) Option "Device" "/dev/input/event8"
[ 8.028] (II) event8 - ELAN1200:00 04F3:307A Mouse: is tagged by udev as: Mouse Pointingstick
[ 8.028] (II) event8 - ELAN1200:00 04F3:307A Mouse: device is a pointer
[ 8.030] (II) event8 - ELAN1200:00 04F3:307A Mouse: device removed
[ 8.106] (II) libinput: ELAN1200:00 04F3:307A Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.106] (II) libinput: ELAN1200:00 04F3:307A Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.106] (II) libinput: ELAN1200:00 04F3:307A Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.106] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-3/i2c-ELAN1200:00/0018:04F3:307A.0001/input/input10/event8"
[ 8.107] (II) XINPUT: Adding extended input device "ELAN1200:00 04F3:307A Mouse" (type: MOUSE, id 20)
[ 8.107] (**) Option "AccelerationScheme" "none"
[ 8.107] (**) ELAN1200:00 04F3:307A Mouse: (accel) selected scheme none/0
[ 8.107] (**) ELAN1200:00 04F3:307A Mouse: (accel) acceleration factor: 2.000
[ 8.107] (**) ELAN1200:00 04F3:307A Mouse: (accel) acceleration threshold: 4
[ 8.114] (II) event8 - ELAN1200:00 04F3:307A Mouse: is tagged by udev as: Mouse Pointingstick
[ 8.116] (II) event8 - ELAN1200:00 04F3:307A Mouse: device is a pointer
[ 8.125] (II) config/udev: Adding input device ELAN1200:00 04F3:307A Mouse (/dev/input/mouse0)
[ 8.125] (**) ELAN1200:00 04F3:307A Mouse: Applying InputClass "devname"
[ 8.125] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:307A Mouse'
[ 8.125] (**) ELAN1200:00 04F3:307A Mouse: always reports core events
[ 8.125] (**) Option "Device" "/dev/input/mouse0"
[ 8.233] (II) mouse0 - not using input device '/dev/input/mouse0'.
[ 8.233] (EE) libinput: ELAN1200:00 04F3:307A Mouse: Failed to create a device for /dev/input/mouse0
[ 8.233] (EE) PreInit returned 2 for "ELAN1200:00 04F3:307A Mouse"
[ 8.233] (II) UnloadModule: "libinput"
[ 8.236] (II) config/udev: Adding input device ELAN1200:00 04F3:307A Touchpad (/dev/input/event9)
[ 8.236] (**) ELAN1200:00 04F3:307A Touchpad: Applying InputClass "devname"
[ 8.236] (**) ELAN1200:00 04F3:307A Touchpad: Applying InputClass "libinput touchpad catchall"
[ 8.236] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:307A Touchpad'
[ 8.236] (**) ELAN1200:00 04F3:307A Touchpad: always reports core events
[ 8.236] (**) Option "Device" "/dev/input/event9"
[ 8.241] (II) event9 - ELAN1200:00 04F3:307A Touchpad: is tagged by udev as: Touchpad
[ 8.246] (II) event9 - ELAN1200:00 04F3:307A Touchpad: device is a touchpad
[ 8.246] (II) event9 - ELAN1200:00 04F3:307A Touchpad: device removed
[ 8.303] (**) Option "Tapping" "on"
[ 8.303] (II) libinput: ELAN1200:00 04F3:307A Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.303] (II) libinput: ELAN1200:00 04F3:307A Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.303] (II) libinput: ELAN1200:00 04F3:307A Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.304] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-3/i2c-ELAN1200:00/0018:04F3:307A.0001/input/input11/event9"
[ 8.304] (II) XINPUT: Adding extended input device "ELAN1200:00 04F3:307A Touchpad" (type: TOUCHPAD, id 21)
[ 8.307] (**) Option "AccelerationScheme" "none"
[ 8.307] (**) ELAN1200:00 04F3:307A Touchpad: (accel) selected scheme none/0
[ 8.307] (**) ELAN1200:00 04F3:307A Touchpad: (accel) acceleration factor: 2.000
[ 8.307] (**) ELAN1200:00 04F3:307A Touchpad: (accel) acceleration threshold: 4
[ 8.311] (II) event9 - ELAN1200:00 04F3:307A Touchpad: is tagged by udev as: Touchpad
[ 8.316] (II) event9 - ELAN1200:00 04F3:307A Touchpad: device is a touchpad
[ 8.319] (II) config/udev: Adding input device ELAN1200:00 04F3:307A Touchpad (/dev/input/mouse1)
[ 8.319] (**) ELAN1200:00 04F3:307A Touchpad: Applying InputClass "devname"
[ 8.319] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:307A Touchpad'
[ 8.319] (**) ELAN1200:00 04F3:307A Touchpad: always reports core events
[ 8.319] (**) Option "Device" "/dev/input/mouse1"
[ 8.366] (II) mouse1 - not using input device '/dev/input/mouse1'.
[ 8.366] (EE) libinput: ELAN1200:00 04F3:307A Touchpad: Failed to create a device for /dev/input/mouse1
[ 8.366] (EE) PreInit returned 2 for "ELAN1200:00 04F3:307A Touchpad"
[ 8.366] (II) UnloadModule: "libinput"
[ 8.368] (II) config/udev: Adding input device HDA Intel PCH Headset Mic (/dev/input/event16)
[ 8.368] (**) HDA Intel PCH Headset Mic: Applying InputClass "devname"
[ 8.368] (II) Using input driver 'libinput' for 'HDA Intel PCH Headset Mic'
[ 8.368] (**) HDA Intel PCH Headset Mic: always reports core events
[ 8.368] (**) Option "Device" "/dev/input/event16"
[ 8.371] (II) event16 - HDA Intel PCH Headset Mic: is tagged by udev as: Switch
[ 8.410] (II) event16 - not using input device '/dev/input/event16'.
[ 8.410] (EE) libinput: HDA Intel PCH Headset Mic: Failed to create a device for /dev/input/event16
[ 8.410] (EE) PreInit returned 2 for "HDA Intel PCH Headset Mic"
[ 8.410] (II) UnloadModule: "libinput"
[ 8.411] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event17)
[ 8.411] (**) HDA Intel PCH Headphone: Applying InputClass "devname"
[ 8.411] (II) Using input driver 'libinput' for 'HDA Intel PCH Headphone'
[ 8.411] (**) HDA Intel PCH Headphone: always reports core events
[ 8.411] (**) Option "Device" "/dev/input/event17"
[ 8.414] (II) event17 - HDA Intel PCH Headphone: is tagged by udev as: Switch
[ 8.453] (II) event17 - not using input device '/dev/input/event17'.
[ 8.453] (EE) libinput: HDA Intel PCH Headphone: Failed to create a device for /dev/input/event17
[ 8.453] (EE) PreInit returned 2 for "HDA Intel PCH Headphone"
[ 8.453] (II) UnloadModule: "libinput"
[ 8.455] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[ 8.455] (**) Asus WMI hotkeys: Applying InputClass "devname"
[ 8.455] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 8.455] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 8.455] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 8.455] (**) Asus WMI hotkeys: always reports core events
[ 8.455] (**) Option "Device" "/dev/input/event7"
[ 8.457] (II) event7 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 8.457] (II) event7 - Asus WMI hotkeys: device is a keyboard
[ 8.458] (II) event7 - Asus WMI hotkeys: device removed
[ 8.496] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input9/event7"
[ 8.496] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 22)
[ 8.496] (**) Option "xkb_layout" "es"
[ 8.499] (II) event7 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 8.500] (II) event7 - Asus WMI hotkeys: device is a keyboard
[ 8.502] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 8.502] (**) AT Translated Set 2 keyboard: Applying InputClass "devname"
[ 8.502] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 8.502] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 8.502] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 8.502] (**) AT Translated Set 2 keyboard: always reports core events
[ 8.502] (**) Option "Device" "/dev/input/event4"
[ 8.505] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 8.506] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 8.512] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 8.533] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 8.533] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 23)
[ 8.533] (**) Option "xkb_layout" "es"
[ 8.537] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 8.537] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 8.544] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 8.545] (**) PC Speaker: Applying InputClass "devname"
[ 8.545] (II) Using input driver 'libinput' for 'PC Speaker'
[ 8.545] (**) PC Speaker: always reports core events
[ 8.545] (**) Option "Device" "/dev/input/event6"
[ 8.547] (II) event6 - PC Speaker: not tagged as supported input device
[ 8.586] (II) event6 - not using input device '/dev/input/event6'.
[ 8.586] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event6
[ 8.586] (EE) PreInit returned 2 for "PC Speaker"
[ 8.586] (II) UnloadModule: "libinput"
[ 8.611] (**) Logitech USB Receiver Consumer Control: Applying InputClass "devname"
[ 8.611] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.611] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[ 8.611] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 8.611] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 8.611] (**) Option "Device" "/dev/input/event25"
[ 8.611] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[ 8.611] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.0007/input/input28/event25"
[ 8.611] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 24)
[ 8.611] (**) Option "xkb_layout" "es"
[ 8.612] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 8.612] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.612] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 8.612] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 8.612] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 8.612] (**) Option "Device" "/dev/input/event19"
[ 8.612] (II) libinput: Kingston HyperX QuadCast S Consumer Control: is a virtual subdevice
[ 8.612] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:0951:171F.0003/input/input22/event19"
[ 8.612] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: KEYBOARD, id 25)
[ 8.612] (**) Option "xkb_layout" "es"
[ 8.614] (II) config/udev: removing device Kingston HyperX QuadCast S Consumer Control
[ 8.614] (II) UnloadModule: "libinput"
[ 8.614] (II) config/udev: removing device Kingston HyperX QuadCast S Consumer Control
[ 8.615] (II) event19 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 8.653] (II) UnloadModule: "libinput"
[ 8.655] (II) config/udev: Adding input device Kingston HyperX QuadCast S Consumer Control (/dev/input/event19)
[ 8.655] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 8.655] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.655] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 8.656] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 8.656] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 8.656] (**) Option "Device" "/dev/input/event19"
[ 8.661] (II) event19 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 8.661] (II) event19 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 8.662] (II) event19 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 8.680] (II) libinput: Kingston HyperX QuadCast S Consumer Control: needs a virtual subdevice
[ 8.680] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:0951:171F.0003/input/input22/event19"
[ 8.680] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: MOUSE, id 19)
[ 8.680] (**) Option "AccelerationScheme" "none"
[ 8.680] (**) Kingston HyperX QuadCast S Consumer Control: (accel) selected scheme none/0
[ 8.680] (**) Kingston HyperX QuadCast S Consumer Control: (accel) acceleration factor: 2.000
[ 8.680] (**) Kingston HyperX QuadCast S Consumer Control: (accel) acceleration threshold: 4
[ 8.685] (II) event19 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 8.685] (II) event19 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 8.687] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 8.687] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.687] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 8.687] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 8.687] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 8.687] (**) Option "Device" "/dev/input/event19"
[ 8.687] (II) libinput: Kingston HyperX QuadCast S Consumer Control: is a virtual subdevice
[ 8.687] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:0951:171F.0003/input/input22/event19"
[ 8.687] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: KEYBOARD, id 25)
[ 8.687] (**) Option "xkb_layout" "es"
[ 8.690] (II) config/udev: Adding input device Kingston HyperX QuadCast S (/dev/input/event20)
[ 8.690] (**) Kingston HyperX QuadCast S: Applying InputClass "devname"
[ 8.690] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S'
[ 8.690] (**) Kingston HyperX QuadCast S: always reports core events
[ 8.690] (**) Option "Device" "/dev/input/event20"
[ 8.694] (II) event20 - Kingston HyperX QuadCast S: not tagged as supported input device
[ 8.736] (II) event20 - not using input device '/dev/input/event20'.
[ 8.736] (EE) libinput: Kingston HyperX QuadCast S: Failed to create a device for /dev/input/event20
[ 8.736] (EE) PreInit returned 2 for "Kingston HyperX QuadCast S"
[ 8.736] (II) UnloadModule: "libinput"
[ 8.737] (II) config/udev: removing device Kingston HyperX QuadCast S Consumer Control
[ 8.737] (II) event18 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 8.770] (II) UnloadModule: "libinput"
[ 8.772] (II) config/udev: Adding input device Kingston HyperX QuadCast S Consumer Control (/dev/input/event18)
[ 8.772] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "devname"
[ 8.772] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.772] (**) Kingston HyperX QuadCast S Consumer Control: Applying InputClass "system-keyboard"
[ 8.772] (II) Using input driver 'libinput' for 'Kingston HyperX QuadCast S Consumer Control'
[ 8.772] (**) Kingston HyperX QuadCast S Consumer Control: always reports core events
[ 8.772] (**) Option "Device" "/dev/input/event18"
[ 8.777] (II) event18 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 8.777] (II) event18 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 8.778] (II) event18 - Kingston HyperX QuadCast S Consumer Control: device removed
[ 8.813] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.3/0003:0951:171D.0002/input/input20/event18"
[ 8.813] (II) XINPUT: Adding extended input device "Kingston HyperX QuadCast S Consumer Control" (type: KEYBOARD, id 18)
[ 8.813] (**) Option "xkb_layout" "es"
[ 8.818] (II) event18 - Kingston HyperX QuadCast S Consumer Control: is tagged by udev as: Keyboard
[ 8.819] (II) event18 - Kingston HyperX QuadCast S Consumer Control: device is a keyboard
[ 8.825] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse2)
[ 8.825] (**) Logitech USB Receiver Mouse: Applying InputClass "devname"
[ 8.825] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[ 8.825] (**) Logitech USB Receiver Mouse: always reports core events
[ 8.825] (**) Option "Device" "/dev/input/mouse2"
[ 8.876] (II) mouse2 - not using input device '/dev/input/mouse2'.
[ 8.876] (EE) libinput: Logitech USB Receiver Mouse: Failed to create a device for /dev/input/mouse2
[ 8.876] (EE) PreInit returned 2 for "Logitech USB Receiver Mouse"
[ 8.876] (II) UnloadModule: "libinput"
[ 8.877] (II) config/udev: removing device Logitech USB Receiver Consumer Control
[ 8.877] (II) UnloadModule: "libinput"
[ 8.877] (II) config/udev: removing device Logitech USB Receiver Consumer Control
[ 8.877] (II) event25 - Logitech USB Receiver Consumer Control: device removed
[ 8.893] (II) UnloadModule: "libinput"
[ 8.895] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event25)
[ 8.895] (**) Logitech USB Receiver Consumer Control: Applying InputClass "devname"
[ 8.895] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.895] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[ 8.895] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 8.895] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 8.895] (**) Option "Device" "/dev/input/event25"
[ 8.900] (II) event25 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 8.901] (II) event25 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 8.902] (II) event25 - Logitech USB Receiver Consumer Control: device removed
[ 8.920] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[ 8.920] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.0007/input/input28/event25"
[ 8.920] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 15)
[ 8.920] (**) Option "AccelerationScheme" "none"
[ 8.920] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[ 8.920] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 8.920] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[ 8.925] (II) event25 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 8.925] (II) event25 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 8.927] (**) Logitech USB Receiver Consumer Control: Applying InputClass "devname"
[ 8.927] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.927] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[ 8.927] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 8.927] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 8.927] (**) Option "Device" "/dev/input/event25"
[ 8.927] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[ 8.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.0007/input/input28/event25"
[ 8.927] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 24)
[ 8.927] (**) Option "xkb_layout" "es"
[ 8.930] (II) config/udev: Adding input device Kingston HyperX Cloud II Wireless (/dev/input/event256)
[ 8.930] (**) Kingston HyperX Cloud II Wireless: Applying InputClass "devname"
[ 8.930] (II) Using input driver 'libinput' for 'Kingston HyperX Cloud II Wireless'
[ 8.930] (**) Kingston HyperX Cloud II Wireless: always reports core events
[ 8.930] (**) Option "Device" "/dev/input/event256"
[ 8.935] (II) event256 - Kingston HyperX Cloud II Wireless: not tagged as supported input device
[ 8.980] (II) event256 - not using input device '/dev/input/event256'.
[ 8.980] (EE) libinput: Kingston HyperX Cloud II Wireless: Failed to create a device for /dev/input/event256
[ 8.980] (EE) PreInit returned 2 for "Kingston HyperX Cloud II Wireless"
[ 8.980] (II) UnloadModule: "libinput"
[ 8.980] (II) config/udev: removing device Logitech USB Receiver Mouse
[ 8.980] (II) event24 - Logitech USB Receiver Mouse: device removed
[ 9.013] (II) UnloadModule: "libinput"
[ 9.015] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event24)
[ 9.015] (**) Logitech USB Receiver Mouse: Applying InputClass "devname"
[ 9.015] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[ 9.015] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[ 9.015] (**) Logitech USB Receiver Mouse: always reports core events
[ 9.015] (**) Option "Device" "/dev/input/event24"
[ 9.020] (II) event24 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 9.021] (II) event24 - Logitech USB Receiver Mouse: device is a pointer
[ 9.022] (II) event24 - Logitech USB Receiver Mouse: device removed
[ 9.056] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.056] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.056] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.056] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.0007/input/input27/event24"
[ 9.056] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 14)
[ 9.057] (**) Option "AccelerationScheme" "none"
[ 9.057] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[ 9.057] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[ 9.057] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[ 9.062] (II) event24 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 9.062] (II) event24 - Logitech USB Receiver Mouse: device is a pointer
[ 9.064] (II) config/udev: removing device Logitech USB Receiver System Control
[ 9.064] (II) event27 - Logitech USB Receiver System Control: device removed
[ 9.083] (II) UnloadModule: "libinput"
[ 9.085] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event27)
[ 9.085] (**) Logitech USB Receiver System Control: Applying InputClass "devname"
[ 9.085] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[ 9.085] (**) Logitech USB Receiver System Control: Applying InputClass "system-keyboard"
[ 9.085] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[ 9.085] (**) Logitech USB Receiver System Control: always reports core events
[ 9.085] (**) Option "Device" "/dev/input/event27"
[ 9.090] (II) event27 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 9.090] (II) event27 - Logitech USB Receiver System Control: device is a keyboard
[ 9.092] (II) event27 - Logitech USB Receiver System Control: device removed
[ 9.110] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:046D:C548.0007/input/input29/event27"
[ 9.110] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 16)
[ 9.110] (**) Option "xkb_layout" "es"
[ 9.115] (II) event27 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 9.115] (II) event27 - Logitech USB Receiver System Control: device is a keyboard
[ 9.117] (II) config/udev: removing device Logitech USB Receiver
[ 9.117] (II) event22 - Logitech USB Receiver: device removed
[ 9.136] (II) UnloadModule: "libinput"
[ 9.138] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event22)
[ 9.139] (**) Logitech USB Receiver: Applying InputClass "devname"
[ 9.139] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 9.139] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[ 9.139] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 9.139] (**) Logitech USB Receiver: always reports core events
[ 9.139] (**) Option "Device" "/dev/input/event22"
[ 9.143] (II) event22 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 9.144] (II) event22 - Logitech USB Receiver: device is a keyboard
[ 9.145] (II) event22 - Logitech USB Receiver: device removed
[ 9.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.0/0003:046D:C548.0005/input/input25/event22"
[ 9.163] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[ 9.163] (**) Option "xkb_layout" "es"
[ 9.168] (II) event22 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 9.169] (II) event22 - Logitech USB Receiver: device is a keyboard
[ 9.176] (II) config/udev: removing device Kingston HyperX Cloud II Wireless Consumer Control
[ 9.176] (II) event21 - Kingston HyperX Cloud II Wireless Consumer Control: device removed
[ 9.216] (II) UnloadModule: "libinput"
[ 9.218] (II) config/udev: Adding input device Kingston HyperX Cloud II Wireless Consumer Control (/dev/input/event21)
[ 9.218] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "devname"
[ 9.218] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 9.218] (**) Kingston HyperX Cloud II Wireless Consumer Control: Applying InputClass "system-keyboard"
[ 9.219] (II) Using input driver 'libinput' for 'Kingston HyperX Cloud II Wireless Consumer Control'
[ 9.219] (**) Kingston HyperX Cloud II Wireless Consumer Control: always reports core events
[ 9.219] (**) Option "Device" "/dev/input/event21"
[ 9.223] (II) event21 - Kingston HyperX Cloud II Wireless Consumer Control: is tagged by udev as: Keyboard
[ 9.224] (II) event21 - Kingston HyperX Cloud II Wireless Consumer Control: device is a keyboard
[ 9.225] (II) event21 - Kingston HyperX Cloud II Wireless Consumer Control: device removed
[ 9.260] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2:1.3/0003:0951:1718.000A/input/input34/event21"
[ 9.260] (II) XINPUT: Adding extended input device "Kingston HyperX Cloud II Wireless Consumer Control" (type: KEYBOARD, id 17)
[ 9.260] (**) Option "xkb_layout" "es"
[ 9.265] (II) event21 - Kingston HyperX Cloud II Wireless Consumer Control: is tagged by udev as: Keyboard
[ 9.265] (II) event21 - Kingston HyperX Cloud II Wireless Consumer Control: device is a keyboard
[ 9.268] (II) config/udev: Adding input device Asus Keyboard (/dev/input/event30)
[ 9.268] (**) Asus Keyboard: Applying InputClass "devname"
[ 9.268] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.268] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 9.268] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 9.268] (**) Asus Keyboard: always reports core events
[ 9.268] (**) Option "Device" "/dev/input/event30"
[ 9.269] (II) event30 - Asus Keyboard: is tagged by udev as: Keyboard
[ 9.269] (II) event30 - Asus Keyboard: device is a keyboard
[ 9.269] (II) event30 - Asus Keyboard: device removed
[ 9.286] (II) libinput: Asus Keyboard: needs a virtual subdevice
[ 9.286] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:0B05:1866.0008/input/input43/event30"
[ 9.286] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: MOUSE, id 26)
[ 9.286] (**) Option "AccelerationScheme" "none"
[ 9.286] (**) Asus Keyboard: (accel) selected scheme none/0
[ 9.286] (**) Asus Keyboard: (accel) acceleration factor: 2.000
[ 9.286] (**) Asus Keyboard: (accel) acceleration threshold: 4
[ 9.287] (II) event30 - Asus Keyboard: is tagged by udev as: Keyboard
[ 9.287] (II) event30 - Asus Keyboard: device is a keyboard
[ 9.288] (**) Asus Keyboard: Applying InputClass "devname"
[ 9.288] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.288] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 9.288] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 9.288] (**) Asus Keyboard: always reports core events
[ 9.288] (**) Option "Device" "/dev/input/event30"
[ 9.288] (II) libinput: Asus Keyboard: is a virtual subdevice
[ 9.288] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:0B05:1866.0008/input/input43/event30"
[ 9.288] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: KEYBOARD, id 27)
[ 9.288] (**) Option "xkb_layout" "es"
[ 9.288] (II) config/udev: Adding input device Asus Keyboard (/dev/input/event31)
[ 9.288] (**) Asus Keyboard: Applying InputClass "devname"
[ 9.288] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.288] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 9.288] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 9.288] (**) Asus Keyboard: always reports core events
[ 9.288] (**) Option "Device" "/dev/input/event31"
[ 9.289] (II) event31 - Asus Keyboard: is tagged by udev as: Keyboard
[ 9.289] (II) event31 - Asus Keyboard: device is a keyboard
[ 9.290] (II) event31 - Asus Keyboard: device removed
[ 9.313] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0B05:1866.0004/input/input36/event31"
[ 9.313] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: KEYBOARD, id 28)
[ 9.313] (**) Option "xkb_layout" "es"
[ 9.315] (II) event31 - Asus Keyboard: is tagged by udev as: Keyboard
[ 9.315] (II) event31 - Asus Keyboard: device is a keyboard
[ 9.318] (II) config/udev: Adding input device Asus Keyboard (/dev/input/event23)
[ 9.318] (**) Asus Keyboard: Applying InputClass "devname"
[ 9.318] (**) Asus Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.318] (**) Asus Keyboard: Applying InputClass "system-keyboard"
[ 9.318] (II) Using input driver 'libinput' for 'Asus Keyboard'
[ 9.318] (**) Asus Keyboard: always reports core events
[ 9.318] (**) Option "Device" "/dev/input/event23"
[ 9.320] (II) event23 - Asus Keyboard: is tagged by udev as: Keyboard
[ 9.320] (II) event23 - Asus Keyboard: device is a keyboard
[ 9.322] (II) event23 - Asus Keyboard: device removed
[ 9.357] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0B05:1866.0006/input/input37/event23"
[ 9.357] (II) XINPUT: Adding extended input device "Asus Keyboard" (type: KEYBOARD, id 29)
[ 9.357] (**) Option "xkb_layout" "es"
[ 9.362] (II) event23 - Asus Keyboard: is tagged by udev as: Keyboard
[ 9.362] (II) event23 - Asus Keyboard: device is a keyboard
[ 9.374] (II) config/udev: Adding input device Logitech G305 (/dev/input/mouse3)
[ 9.374] (**) Logitech G305: Applying InputClass "devname"
[ 9.374] (**) Logitech G305: Applying InputClass "system-keyboard"
[ 9.374] (II) Using input driver 'libinput' for 'Logitech G305'
[ 9.374] (**) Logitech G305: always reports core events
[ 9.374] (**) Option "Device" "/dev/input/mouse3"
[ 9.433] (II) mouse3 - not using input device '/dev/input/mouse3'.
[ 9.433] (EE) libinput: Logitech G305: Failed to create a device for /dev/input/mouse3
[ 9.433] (EE) PreInit returned 2 for "Logitech G305"
[ 9.433] (II) UnloadModule: "libinput"
[ 9.434] (II) config/udev: Adding input device Logitech G305 (/dev/input/event26)
[ 9.434] (**) Logitech G305: Applying InputClass "devname"
[ 9.434] (**) Logitech G305: Applying InputClass "libinput pointer catchall"
[ 9.434] (**) Logitech G305: Applying InputClass "libinput keyboard catchall"
[ 9.434] (**) Logitech G305: Applying InputClass "system-keyboard"
[ 9.434] (II) Using input driver 'libinput' for 'Logitech G305'
[ 9.434] (**) Logitech G305: always reports core events
[ 9.434] (**) Option "Device" "/dev/input/event26"
[ 9.436] (II) event26 - Logitech G305: is tagged by udev as: Keyboard Mouse
[ 9.436] (II) event26 - Logitech G305: device is a pointer
[ 9.436] (II) event26 - Logitech G305: device is a keyboard
[ 9.436] (II) event26 - Logitech G305: device removed
[ 9.480] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.480] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.480] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.480] (II) libinput: Logitech G305: needs a virtual subdevice
[ 9.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.4/1-13.4:1.2/0003:046D:C53F.000D/0003:046D:4074.000E/input/input49/event26"
[ 9.480] (II) XINPUT: Adding extended input device "Logitech G305" (type: MOUSE, id 30)
[ 9.480] (**) Option "AccelerationScheme" "none"
[ 9.480] (**) Logitech G305: (accel) selected scheme none/0
[ 9.480] (**) Logitech G305: (accel) acceleration factor: 2.000
[ 9.480] (**) Logitech G305: (accel) acceleration threshold: 4
[ 9.485] (II) event26 - Logitech G305: is tagged by udev as: Keyboard Mouse
[ 9.485] (II) event26 - Logitech G305: device is a pointer
[ 9.485] (II) event26 - Logitech G305: device is a keyboard
[ 9.488] (**) Logitech G305: Applying InputClass "devname"
[ 9.488] (**) Logitech G305: Applying InputClass "libinput pointer catchall"
[ 9.488] (**) Logitech G305: Applying InputClass "libinput keyboard catchall"
[ 9.488] (**) Logitech G305: Applying InputClass "system-keyboard"
[ 9.488] (II) Using input driver 'libinput' for 'Logitech G305'
[ 9.488] (**) Logitech G305: always reports core events
[ 9.488] (**) Option "Device" "/dev/input/event26"
[ 9.488] (II) libinput: Logitech G305: is a virtual subdevice
[ 9.488] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.488] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.488] (II) libinput: Logitech G305: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 9.488] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.4/1-13.4:1.2/0003:046D:C53F.000D/0003:046D:4074.000E/input/input49/event26"
[ 9.488] (II) XINPUT: Adding extended input device "Logitech G305" (type: KEYBOARD, id 31)
[ 9.488] (**) Option "xkb_layout" "es"
[ 16.617] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 16.617] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 16.617] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 16.617] (--) NVIDIA(GPU-0):
[ 16.617] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 16.617] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 16.617] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 16.617] (--) NVIDIA(GPU-0):
[ 16.662] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 16.662] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 16.662] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 16.662] (--) NVIDIA(GPU-0):
[ 16.662] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 16.662] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 16.662] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 16.662] (--) NVIDIA(GPU-0):
[ 16.662] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 16.662] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 16.662] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 16.662] (--) NVIDIA(GPU-0):
[ 16.707] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 16.707] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 16.707] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 16.707] (--) NVIDIA(GPU-0):
[ 18.326] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 18.326] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 18.326] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 18.326] (--) NVIDIA(GPU-0):
[ 18.326] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 18.326] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 18.326] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 18.326] (--) NVIDIA(GPU-0):
[ 18.371] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 18.371] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 18.371] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 18.371] (--) NVIDIA(GPU-0):
[ 18.371] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 18.371] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 18.371] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 18.371] (--) NVIDIA(GPU-0):
[ 18.371] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 18.371] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 18.371] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 18.371] (--) NVIDIA(GPU-0):
[ 18.414] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 18.414] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 18.414] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 18.414] (--) NVIDIA(GPU-0):
[ 18.865] (EE) modeset(G0): failed to set mode: No such file or directory
[ 21.461] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 21.461] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 21.461] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 21.461] (--) NVIDIA(GPU-0):
[ 21.461] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 21.461] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 21.461] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 21.461] (--) NVIDIA(GPU-0):
[ 21.509] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 21.509] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 21.509] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 21.509] (--) NVIDIA(GPU-0):
[ 21.509] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 21.509] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 21.509] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 21.509] (--) NVIDIA(GPU-0):
[ 21.509] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 21.509] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 21.509] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 21.509] (--) NVIDIA(GPU-0):
[ 21.554] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 21.554] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 21.554] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 21.554] (--) NVIDIA(GPU-0):
[ 22.344] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 22.344] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 22.344] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 22.344] (--) NVIDIA(GPU-0):
[ 22.344] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 22.344] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 22.344] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 22.344] (--) NVIDIA(GPU-0):
[ 22.388] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 22.388] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 22.388] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 22.388] (--) NVIDIA(GPU-0):
[ 22.389] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 22.389] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 22.389] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 22.389] (--) NVIDIA(GPU-0):
[ 22.389] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 22.389] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 22.389] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 22.389] (--) NVIDIA(GPU-0):
[ 22.432] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): connected
[ 22.432] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): Internal TMDS
[ 22.432] (--) NVIDIA(GPU-0): Samsung SMT27A550 (DFP-2): 600.0 MHz maximum pixel clock
[ 22.432] (--) NVIDIA(GPU-0):Offline
#4 2023-07-23 07:02:04
- seth
- Member
- Registered: 2012-09-03
- Posts: 66,122
Re: [Solved]Integrated monitor only working at 144hz when using LTS kernel
This is a reverse prime situation.
You're running on the nvidia chip, the eDP is wired to the intel chip and driven by the modesetting driver.
The EDID correctly annouces
DTD 1: 1920x1080 144.027931 Hz 16:9 175.138 kHz 368.140000 MHz (analog composite, sync-on-green, 344 mm x 194 mm)
Hfront 48 Hsync 32 Hback 102 Hpol N
Vfront 10 Vsync 5 Vback 121 Vpol NAnd the server correctly reports that
[ 6.424] (II) modeset(G0): Supported detailed timing:
[ 6.424] (II) modeset(G0): clock: 368.1 MHz Image Size: 344 x 194 mm
[ 6.424] (II) modeset(G0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2102 h_border: 0
[ 6.424] (II) modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1095 v_blanking: 1216 v_border: 0You can try to manually add
Modeline "1920x1080_144.03" 368.140 1920 1968 2000 2102 1080 1090 1095 1216 -HSync -VSynchttps://wiki.archlinux.org/title/Xrandr … esolutions
https://wiki.archlinux.org/title/Xrandr … esolutions
I'd say it's a bug in the modesetting driver, but since the only difference is the kernel, it must be something in the i915 module.
Does this behave the same if you don't run the server on the nvidia GPU?
Online
#5 2023-07-23 16:14:16
- soaliar
- Member
- Registered: 2009-08-06
- Posts: 36
Re: [Solved]Integrated monitor only working at 144hz when using LTS kernel
Your second link did the trick!
I created the entry for the monitor in /etc/X11/xorg.conf.d/10-monitor.conf:
Section "Monitor"
Identifier "eDP-1-1"
Modeline "1920x1080_144.03" 368.140 1920 1968 2000 2102 1080 1090 1095 1216 -HSync -VSync
Option "PreferredMode" "1920x1080_144.03"
EndSectionJust as an interesting note:
Now all apps start in my main display (as they should) when running them on KDE. Previously they'd all start in the HDMI monitor, even though the KDE settings list the eDP as the Primary screen.
Also, for some reason SDDM displays only in the HDMI monitor...
I have an app that lists monitors plugged in using Qt. When booting LTS kernel it successfully detects both, but when booting on regular kernel it only detects my secondary (HDMI-0) monitor. It seems like the regular kernel has some issues with it, and adding that config to X11 configurations makes it usable.
Offline
#6 2023-07-23 16:21:52
- seth
- Member
- Registered: 2012-09-03
- Posts: 66,122
Re: [Solved]Integrated monitor only working at 144hz when using LTS kernel
iirc KDE decides what the active monitor is based on the mouse position and the active window, you can still place windows on both outputs and drag them around?
https://wiki.archlinux.org/title/Xrandr#Configuration
Though the server should™ enable all available outputs and SDDM should™ leave that alone.
I'm kinda confident about the first part but the second… well, we don't live in a shouldland 
In the light of the last paragraphI assume that this is where this is falling apart if the code only looks at eg. /sys/class/drm/card0*
Online
#7 2023-07-23 20:33:26
- topcat01
- Member
- Registered: 2019-09-17
- Posts: 197
Re: [Solved]Integrated monitor only working at 144hz when using LTS kernel
I wonder if this is related: https://gitlab.freedesktop.org/drm/intel/-/issues/8789
Specifically, the EDID parsing issue, although the symptoms differ.
Last edited by topcat01 (2023-07-23 20:34:19)
Offline
#8 2023-07-23 20:56:42
- seth
- Member
- Registered: 2012-09-03
- Posts: 66,122
Re: [Solved]Integrated monitor only working at 144hz when using LTS kernel
https://gitlab.freedesktop.org/drm/inte … te_1994807
Detailed modes are gonna be very relevant here, yes. So it's likely the same issue.
Also te EDIDs are virtually te same
< Model: 33005
< Made in: week 16 of 2017
---
> Model: 33517
> Made in: week 10 of 2018
36c36
< DTD 1: 1920x1080 144.027931 Hz 16:9 175.138 kHz 368.140000 MHz (analog composite, sync-on-green, 344 mm x 193 mm)
---
> DTD 1: 1920x1080 144.027931 Hz 16:9 175.138 kHz 368.140000 MHz (analog composite, sync-on-green, 344 mm x 194 mm)
43c43
< Alphanumeric Data String: 'B156HAN08.0 '
---
> Alphanumeric Data String: 'B156HAN08.2 'Good find, @soaliar you probably want to #metoo that bug.
Online