Arch Linux

aRcHaTe

Member

Registered: 2006-10-24

Posts: 646

Cannot start xorg after update

Hi everyone
i just updated today and all of the sudden xorg wont even get into gdm. I have tried and reinstall all the files i can think off with no change. I managed to get DMESG but im still unable to figure out why i only get a black screen and xorg doesnt start.
Can someone help me with this one?

[    0.000000] Linux version 6.1.50-1-lts (linux-lts@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT_DYNAMIC Wed, 30 Aug 2023 14:44:21 +0000
[    0.000000] Command line: rw root=/dev/nvme1n1p1 splash=silent quiet showopts initrd=\initramfs-linux-lts.img
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20c000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000dbb14fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dbb15000-0x00000000dbc68fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dbc69000-0x00000000dbce5fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dbce6000-0x00000000dc1fbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dc1fc000-0x00000000dd004fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd005000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xd921f018-0xd922e057] usable ==> usable
[    0.000000] e820: update [mem 0xd921f018-0xd922e057] usable ==> usable
[    0.000000] e820: update [mem 0xd91ff018-0xd921ec57] usable ==> usable
[    0.000000] e820: update [mem 0xd91ff018-0xd921ec57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009d7ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000000a20c000-0x000000000affffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000d91ff017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d91ff018-0x00000000d921ec57] usable
[    0.000000] reserve setup_data: [mem 0x00000000d921ec58-0x00000000d921f017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d921f018-0x00000000d922e057] usable
[    0.000000] reserve setup_data: [mem 0x00000000d922e058-0x00000000dbb14fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000dbb15000-0x00000000dbc68fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dbc69000-0x00000000dbce5fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000dbce6000-0x00000000dc1fbfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000dc1fc000-0x00000000dd004fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dd005000-0x00000000deffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041f37ffff] usable
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: TPMFinalLog=0xdc1b0000 ACPI 2.0=0xdc149000 ACPI=0xdc149000 SMBIOS=0xdce50000 MEMATTR=0xd6a42698 ESRT=0xd9d39f18 INITRD=0xd3312f18 RNG=0xdbce5018 TPMEventLog=0xd922f018
[    0.000000] random: crng init done
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. MS-7B85/B450 GAMING PRO CARBON AC (MS-7B85), BIOS 1.C0 06/11/2020
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3600.211 MHz processor
[    0.000123] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000125] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000132] last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[    0.001307] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.001472] total RAM covered: 3583M
[    0.001614] Found optimal setting for mtrr clean up
[    0.001614]  gran_size: 64K     chunk_size: 64M     num_reg: 4      lose cover RAM: 0G
[    0.001694] e820: update [mem 0xdc600000-0xdc60ffff] usable ==> reserved
[    0.001699] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.001703] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.005689] esrt: Reserving ESRT space from 0x00000000d9d39f18 to 0x00000000d9d39f50.
[    0.005700] e820: update [mem 0xd9d39000-0xd9d39fff] usable ==> reserved
[    0.005748] Using GB pages for direct mapping
[    0.006679] Secure boot disabled
[    0.006680] RAMDISK: [mem 0x7f4f9000-0x7fffffff]
[    0.006683] ACPI: Early table checksum verification disabled
[    0.006686] ACPI: RSDP 0x00000000DC149000 000024 (v02 ALASKA)
[    0.006689] ACPI: XSDT 0x00000000DC1490A0 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006693] ACPI: FACP 0x00000000DC150C88 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.006698] ACPI: DSDT 0x00000000DC149200 007A83 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.006700] ACPI: FACS 0x00000000DC1E5E00 000040
[    0.006702] ACPI: APIC 0x00000000DC150DA0 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.006704] ACPI: FPDT 0x00000000DC150F00 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006706] ACPI: FIDT 0x00000000DC150F48 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006709] ACPI: SSDT 0x00000000DC150FE8 0000C8 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.006711] ACPI: SSDT 0x00000000DC1510B0 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
[    0.006714] ACPI: SSDT 0x00000000DC159D48 003776 (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.006716] ACPI: MCFG 0x00000000DC15D4C0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.006718] ACPI: HPET 0x00000000DC15D500 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.006720] ACPI: UEFI 0x00000000DC15D538 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.006722] ACPI: TPM2 0x00000000DC15D580 000038 (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.006724] ACPI: IVRS 0x00000000DC15D5B8 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[    0.006727] ACPI: PCCT 0x00000000DC15D688 00006E (v01 AMD    AMD PCCT 00000001 AMD  00000000)
[    0.006729] ACPI: SSDT 0x00000000DC15D6F8 002F29 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.006731] ACPI: CRAT 0x00000000DC160628 000B58 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.006733] ACPI: CDIT 0x00000000DC161180 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.006735] ACPI: BGRT 0x00000000DC1611B0 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006738] ACPI: SSDT 0x00000000DC1611E8 001D4A (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.006740] ACPI: SSDT 0x00000000DC162F38 0000BF (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.006743] ACPI: WSMT 0x00000000DC162FF8 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006744] ACPI: Reserving FACP table memory at [mem 0xdc150c88-0xdc150d9b]
[    0.006746] ACPI: Reserving DSDT table memory at [mem 0xdc149200-0xdc150c82]
[    0.006746] ACPI: Reserving FACS table memory at [mem 0xdc1e5e00-0xdc1e5e3f]
[    0.006747] ACPI: Reserving APIC table memory at [mem 0xdc150da0-0xdc150efd]
[    0.006748] ACPI: Reserving FPDT table memory at [mem 0xdc150f00-0xdc150f43]
[    0.006748] ACPI: Reserving FIDT table memory at [mem 0xdc150f48-0xdc150fe3]
[    0.006749] ACPI: Reserving SSDT table memory at [mem 0xdc150fe8-0xdc1510af]
[    0.006750] ACPI: Reserving SSDT table memory at [mem 0xdc1510b0-0xdc159d47]
[    0.006750] ACPI: Reserving SSDT table memory at [mem 0xdc159d48-0xdc15d4bd]
[    0.006751] ACPI: Reserving MCFG table memory at [mem 0xdc15d4c0-0xdc15d4fb]
[    0.006752] ACPI: Reserving HPET table memory at [mem 0xdc15d500-0xdc15d537]
[    0.006752] ACPI: Reserving UEFI table memory at [mem 0xdc15d538-0xdc15d579]
[    0.006753] ACPI: Reserving TPM2 table memory at [mem 0xdc15d580-0xdc15d5b7]
[    0.006754] ACPI: Reserving IVRS table memory at [mem 0xdc15d5b8-0xdc15d687]
[    0.006754] ACPI: Reserving PCCT table memory at [mem 0xdc15d688-0xdc15d6f5]
[    0.006755] ACPI: Reserving SSDT table memory at [mem 0xdc15d6f8-0xdc160620]
[    0.006756] ACPI: Reserving CRAT table memory at [mem 0xdc160628-0xdc16117f]
[    0.006756] ACPI: Reserving CDIT table memory at [mem 0xdc161180-0xdc1611a8]
[    0.006757] ACPI: Reserving BGRT table memory at [mem 0xdc1611b0-0xdc1611e7]
[    0.006758] ACPI: Reserving SSDT table memory at [mem 0xdc1611e8-0xdc162f31]
[    0.006758] ACPI: Reserving SSDT table memory at [mem 0xdc162f38-0xdc162ff6]
[    0.006759] ACPI: Reserving WSMT table memory at [mem 0xdc162ff8-0xdc16301f]
[    0.006807] No NUMA configuration found
[    0.006808] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[    0.006810] NODE_DATA(0) allocated [mem 0x41f37b000-0x41f37ffff]
[    0.006842] Zone ranges:
[    0.006843]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006844]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006845]   Normal   [mem 0x0000000100000000-0x000000041f37ffff]
[    0.006846]   Device   empty
[    0.006847] Movable zone start for each node
[    0.006847] Early memory node ranges
[    0.006848]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.006849]   node   0: [mem 0x0000000000100000-0x0000000009d7ffff]
[    0.006850]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.006850]   node   0: [mem 0x000000000a20c000-0x000000000affffff]
[    0.006851]   node   0: [mem 0x000000000b020000-0x00000000dbb14fff]
[    0.006852]   node   0: [mem 0x00000000dd005000-0x00000000deffffff]
[    0.006853]   node   0: [mem 0x0000000100000000-0x000000041f37ffff]
[    0.006855] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[    0.006859] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.006875] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.007018] On node 0, zone DMA32: 640 pages in unavailable ranges
[    0.007032] On node 0, zone DMA32: 12 pages in unavailable ranges
[    0.012573] On node 0, zone DMA32: 32 pages in unavailable ranges
[    0.012679] On node 0, zone DMA32: 5360 pages in unavailable ranges
[    0.037812] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.037843] On node 0, zone Normal: 3200 pages in unavailable ranges
[    0.038157] ACPI: PM-Timer IO Port: 0x808
[    0.038164] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.038178] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.038183] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.038185] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.038187] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.038190] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.038191] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.038203] e820: update [mem 0xd695d000-0xd69b9fff] usable ==> reserved
[    0.038216] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[    0.038233] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.038234] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.038236] PM: hibernation: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
[    0.038237] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
[    0.038238] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.038239] PM: hibernation: Registered nosave memory: [mem 0xd695d000-0xd69b9fff]
[    0.038241] PM: hibernation: Registered nosave memory: [mem 0xd91ff000-0xd91fffff]
[    0.038242] PM: hibernation: Registered nosave memory: [mem 0xd921e000-0xd921efff]
[    0.038243] PM: hibernation: Registered nosave memory: [mem 0xd921f000-0xd921ffff]
[    0.038244] PM: hibernation: Registered nosave memory: [mem 0xd922e000-0xd922efff]
[    0.038245] PM: hibernation: Registered nosave memory: [mem 0xd9d39000-0xd9d39fff]
[    0.038247] PM: hibernation: Registered nosave memory: [mem 0xdbb15000-0xdbc68fff]
[    0.038247] PM: hibernation: Registered nosave memory: [mem 0xdbc69000-0xdbce5fff]
[    0.038248] PM: hibernation: Registered nosave memory: [mem 0xdbce6000-0xdc1fbfff]
[    0.038248] PM: hibernation: Registered nosave memory: [mem 0xdc1fc000-0xdd004fff]
[    0.038249] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.038250] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.038251] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.038251] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[    0.038252] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[    0.038253] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.038254] Booting paravirtualized kernel on bare hardware
[    0.038257] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.042235] setup_percpu: NR_CPUS:320 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[    0.043521] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[    0.043527] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[    0.043529] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.043536] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[    0.043561] Fallback order for Node 0: 0
[    0.043564] Built 1 zonelists, mobility grouping on.  Total pages: 4115380
[    0.043565] Policy zone: Normal
[    0.043566] Kernel command line: rw root=/dev/nvme1n1p1 splash=silent quiet showopts initrd=\initramfs-linux-lts.img
[    0.043626] Unknown kernel command line parameters "showopts splash=silent", will be passed to user space.
[    0.043642] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.043643] printk: log_buf_len total cpu_extra contributions: 126976 bytes
[    0.043643] printk: log_buf_len min size: 131072 bytes
[    0.043825] printk: log_buf_len: 262144 bytes
[    0.043826] printk: early log buf free: 117096(89%)
[    0.045704] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.046707] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.047053] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.047088] software IO TLB: area num 32.
[    0.097370] Memory: 16185396K/16723468K available (16391K kernel code, 2139K rwdata, 11608K rodata, 2148K init, 5352K bss, 537812K reserved, 0K cma-reserved)
[    0.097503] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.097529] ftrace: allocating 46487 entries in 182 pages
[    0.103919] ftrace: allocated 182 pages with 5 groups
[    0.104444] Dynamic Preempt: voluntary
[    0.104491] rcu: Preemptible hierarchical RCU implementation.
[    0.104492] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
[    0.104493]     Trampoline variant of Tasks RCU enabled.
[    0.104493]     Rude variant of Tasks RCU enabled.
[    0.104493]     Tracing variant of Tasks RCU enabled.
[    0.104494] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.104495] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.107448] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
[    0.107621] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.107708] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.107738] Console: colour dummy device 80x25
[    0.107753] printk: console [tty0] enabled
[    0.107775] ACPI: Core revision 20220331
[    0.107883] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.107901] APIC: Switch to symmetric I/O mode setup
[    0.108927] AMD-Vi: Using global IVHD EFR:0x58f77ef22294ade, EFR2:0x0
[    0.109219] Switched APIC routing to physical flat.
[    0.109957] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.124568] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e51a30fcb, max_idle_ns: 440795230850 ns
[    0.124571] Calibrating delay loop (skipped), value calculated using timer frequency.. 7203.43 BogoMIPS (lpj=12000703)
[    0.124583] Zenbleed: please update your microcode for the most optimal fix
[    0.124584] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.124625] LVT offset 1 assigned for vector 0xf9
[    0.124738] LVT offset 2 assigned for vector 0xf4
[    0.124769] process: using mwait in idle threads
[    0.124769] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.124770] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.124773] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.124774] Spectre V2 : Mitigation: Retpolines
[    0.124775] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.124775] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.124776] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.124777] RETBleed: Mitigation: untrained return thunk
[    0.124778] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.124779] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[    0.124779] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.124780] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.124781] Speculative Return Stack Overflow: Mitigation: safe RET
[    0.124785] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.124786] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.124786] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.124787] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.124788] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.131916] Freeing SMP alternatives memory: 40K
[    0.131918] pid_max: default: 32768 minimum: 301
[    0.134492] LSM: Security Framework initializing
[    0.134498] landlock: Up and running.
[    0.134499] Yama: becoming mindful.
[    0.134505] LSM support for eBPF active
[    0.134542] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.134564] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.243426] smpboot: CPU0: AMD Ryzen 5 3600 6-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[    0.243530] cblist_init_generic: Setting adjustable number of callback queues.
[    0.243532] cblist_init_generic: Setting shift to 5 and lim to 1.
[    0.243542] cblist_init_generic: Setting adjustable number of callback queues.
[    0.243543] cblist_init_generic: Setting shift to 5 and lim to 1.
[    0.243557] cblist_init_generic: Setting adjustable number of callback queues.
[    0.243557] cblist_init_generic: Setting shift to 5 and lim to 1.
[    0.243566] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.243569] ... version:                0
[    0.243570] ... bit width:              48
[    0.243570] ... generic registers:      6
[    0.243571] ... value mask:             0000ffffffffffff
[    0.243571] ... max period:             00007fffffffffff
[    0.243572] ... fixed-purpose events:   0
[    0.243573] ... event mask:             000000000000003f
[    0.243626] signal: max sigframe size: 1776
[    0.243638] rcu: Hierarchical SRCU implementation.
[    0.243639] rcu:     Max phase no-delay instances is 1000.
[    0.243850] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.244037] smp: Bringing up secondary CPUs ...
[    0.244111] x86: Booting SMP configuration:
[    0.244112] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6
[    0.254635] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.254670]   #7  #8  #9 #10 #11
[    0.266790] smp: Brought up 1 node, 12 CPUs
[    0.266790] smpboot: Max logical packages: 3
[    0.266790] smpboot: Total of 12 processors activated (86439.27 BogoMIPS)
[    0.268481] devtmpfs: initialized
[    0.268481] x86/mm: Memory block size: 128MB
[    0.268676] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
[    0.268676] ACPI: PM: Registering ACPI NVS region [mem 0xdbce6000-0xdc1fbfff] (5332992 bytes)
[    0.268676] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.268676] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.268676] pinctrl core: initialized pinctrl subsystem
[    0.268676] PM: RTC time: 17:20:43, date: 2023-09-01
[    0.268676] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.268723] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.268856] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.268987] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.268997] audit: initializing netlink subsys (disabled)
[    0.269001] audit: type=2000 audit(1693588843.159:1): state=initialized audit_enabled=0 res=1
[    0.269001] thermal_sys: Registered thermal governor 'fair_share'
[    0.269001] thermal_sys: Registered thermal governor 'bang_bang'
[    0.269001] thermal_sys: Registered thermal governor 'step_wise'
[    0.269001] thermal_sys: Registered thermal governor 'user_space'
[    0.269001] thermal_sys: Registered thermal governor 'power_allocator'
[    0.269001] cpuidle: using governor ladder
[    0.269001] cpuidle: using governor menu
[    0.269001] Detected 1 PCC Subspaces
[    0.269001] Registering PCC driver as Mailbox controller
[    0.269001] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.269001] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.269001] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.269001] PCI: Using configuration type 1 for base access
[    0.272194] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.274618] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.274618] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.274618] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.274618] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.274753] ACPI: Added _OSI(Module Device)
[    0.274753] ACPI: Added _OSI(Processor Device)
[    0.274753] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.274753] ACPI: Added _OSI(Processor Aggregator Device)
[    0.284451] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.285513] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.290741] ACPI: Interpreter enabled
[    0.290741] ACPI: PM: (supports S0 S3 S4 S5)
[    0.290741] ACPI: Using IOAPIC for interrupt routing
[    0.290741] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.290741] PCI: Using E820 reservations for host bridge windows
[    0.290741] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.296598] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.296603] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.296673] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR DPC]
[    0.296797] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[    0.296804] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.297120] PCI host bridge to bus 0000:00
[    0.297121] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.297123] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.297124] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.297124] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.297125] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.297126] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.297127] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.297129] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.297141] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[    0.297225] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
[    0.297304] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[    0.297355] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
[    0.297427] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.297595] pci 0000:00:01.3: [1022:1483] type 01 class 0x060400
[    0.297621] pci 0000:00:01.3: enabling Extended Tags
[    0.297667] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.297848] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[    0.297906] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[    0.297957] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[    0.298038] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.298217] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[    0.298272] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[    0.298329] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[    0.298379] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[    0.298404] pci 0000:00:07.1: enabling Extended Tags
[    0.298443] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.298540] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[    0.298590] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[    0.298615] pci 0000:00:08.1: enabling Extended Tags
[    0.298658] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.298764] pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
[    0.298789] pci 0000:00:08.2: enabling Extended Tags
[    0.298831] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[    0.298931] pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
[    0.298957] pci 0000:00:08.3: enabling Extended Tags
[    0.299000] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
[    0.299116] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.299218] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.299327] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[    0.299352] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[    0.299376] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[    0.299400] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[    0.299424] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[    0.299448] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[    0.299474] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[    0.299498] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[    0.299588] pci 0000:01:00.0: [1987:5012] type 00 class 0x010802
[    0.299635] pci 0000:01:00.0: reg 0x10: [mem 0xf7b00000-0xf7b03fff 64bit]
[    0.300183] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.300187] pci 0000:00:01.1:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.300239] pci 0000:03:00.0: [1022:43d5] type 00 class 0x0c0330
[    0.300257] pci 0000:03:00.0: reg 0x10: [mem 0xf75a0000-0xf75a7fff 64bit]
[    0.300299] pci 0000:03:00.0: enabling Extended Tags
[    0.300354] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.300400] pci 0000:03:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:01.3 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.300483] pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
[    0.300532] pci 0000:03:00.1: reg 0x24: [mem 0xf7580000-0xf759ffff]
[    0.300540] pci 0000:03:00.1: reg 0x30: [mem 0xf7500000-0xf757ffff pref]
[    0.300547] pci 0000:03:00.1: enabling Extended Tags
[    0.300588] pci 0000:03:00.1: PME# supported from D3hot D3cold
[    0.300663] pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
[    0.300708] pci 0000:03:00.2: enabling Extended Tags
[    0.300755] pci 0000:03:00.2: PME# supported from D3hot D3cold
[    0.300849] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.300852] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.300854] pci 0000:00:01.3:   bridge window [mem 0xf7200000-0xf75fffff]
[    0.300937] pci 0000:20:00.0: [1022:43c7] type 01 class 0x060400
[    0.300986] pci 0000:20:00.0: enabling Extended Tags
[    0.301045] pci 0000:20:00.0: PME# supported from D3hot D3cold
[    0.301150] pci 0000:20:01.0: [1022:43c7] type 01 class 0x060400
[    0.301199] pci 0000:20:01.0: enabling Extended Tags
[    0.301260] pci 0000:20:01.0: PME# supported from D3hot D3cold
[    0.301374] pci 0000:20:04.0: [1022:43c7] type 01 class 0x060400
[    0.301424] pci 0000:20:04.0: enabling Extended Tags
[    0.301483] pci 0000:20:04.0: PME# supported from D3hot D3cold
[    0.301600] pci 0000:03:00.2: PCI bridge to [bus 20-25]
[    0.301606] pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
[    0.301608] pci 0000:03:00.2:   bridge window [mem 0xf7200000-0xf74fffff]
[    0.301682] pci 0000:21:00.0: [8086:2526] type 00 class 0x028000
[    0.301712] pci 0000:21:00.0: reg 0x10: [mem 0xf7400000-0xf7403fff 64bit]
[    0.301874] pci 0000:21:00.0: PME# supported from D0 D3hot D3cold
[    0.302082] pci 0000:20:00.0: PCI bridge to [bus 21]
[    0.302089] pci 0000:20:00.0:   bridge window [mem 0xf7400000-0xf74fffff]
[    0.302165] pci 0000:22:00.0: [8086:1539] type 00 class 0x020000
[    0.302193] pci 0000:22:00.0: reg 0x10: [mem 0xf7300000-0xf731ffff]
[    0.302218] pci 0000:22:00.0: reg 0x18: [io  0xf000-0xf01f]
[    0.302231] pci 0000:22:00.0: reg 0x1c: [mem 0xf7320000-0xf7323fff]
[    0.302404] pci 0000:22:00.0: PME# supported from D0 D3hot D3cold
[    0.302607] pci 0000:20:01.0: PCI bridge to [bus 22]
[    0.302612] pci 0000:20:01.0:   bridge window [io  0xf000-0xffff]
[    0.302615] pci 0000:20:01.0:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.302697] pci 0000:25:00.0: [1987:5016] type 00 class 0x010802
[    0.302756] pci 0000:25:00.0: reg 0x10: [mem 0xf7200000-0xf7203fff 64bit]
[    0.302892] pci 0000:25:00.0: enabling Extended Tags
[    0.303389] pci 0000:25:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:01.3 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[    0.303649] pci 0000:20:04.0: PCI bridge to [bus 25]
[    0.303656] pci 0000:20:04.0:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.303723] pci 0000:26:00.0: [10de:1e89] type 00 class 0x030000
[    0.303737] pci 0000:26:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.303750] pci 0000:26:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.303762] pci 0000:26:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.303770] pci 0000:26:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.303778] pci 0000:26:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.303797] pci 0000:26:00.0: BAR 1: assigned to efifb
[    0.303849] pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
[    0.303929] pci 0000:26:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.304032] pci 0000:26:00.1: [10de:10f8] type 00 class 0x040300
[    0.304045] pci 0000:26:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.304178] pci 0000:26:00.2: [10de:1ad8] type 00 class 0x0c0330
[    0.304197] pci 0000:26:00.2: reg 0x10: [mem 0xf2000000-0xf203ffff 64bit pref]
[    0.304216] pci 0000:26:00.2: reg 0x1c: [mem 0xf2040000-0xf204ffff 64bit pref]
[    0.304278] pci 0000:26:00.2: PME# supported from D0 D3hot D3cold
[    0.304339] pci 0000:26:00.3: [10de:1ad9] type 00 class 0x0c8000
[    0.304351] pci 0000:26:00.3: reg 0x10: [mem 0xf7084000-0xf7084fff]
[    0.304429] pci 0000:26:00.3: PME# supported from D0 D3hot D3cold
[    0.304521] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.304524] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.304527] pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.304530] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf20fffff 64bit pref]
[    0.304566] pci 0000:27:00.0: [1022:148a] type 00 class 0x130000
[    0.304596] pci 0000:27:00.0: enabling Extended Tags
[    0.304731] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.304780] pci 0000:28:00.0: [1022:1485] type 00 class 0x130000
[    0.304813] pci 0000:28:00.0: enabling Extended Tags
[    0.304955] pci 0000:28:00.1: [1022:1486] type 00 class 0x108000
[    0.304971] pci 0000:28:00.1: reg 0x18: [mem 0xf7700000-0xf77fffff]
[    0.304982] pci 0000:28:00.1: reg 0x24: [mem 0xf7808000-0xf7809fff]
[    0.304991] pci 0000:28:00.1: enabling Extended Tags
[    0.305108] pci 0000:28:00.3: [1022:149c] type 00 class 0x0c0330
[    0.305121] pci 0000:28:00.3: reg 0x10: [mem 0xf7600000-0xf76fffff 64bit]
[    0.305151] pci 0000:28:00.3: enabling Extended Tags
[    0.305196] pci 0000:28:00.3: PME# supported from D0 D3hot D3cold
[    0.305287] pci 0000:28:00.4: [1022:1487] type 00 class 0x040300
[    0.305296] pci 0000:28:00.4: reg 0x10: [mem 0xf7800000-0xf7807fff]
[    0.305322] pci 0000:28:00.4: enabling Extended Tags
[    0.305365] pci 0000:28:00.4: PME# supported from D0 D3hot D3cold
[    0.305462] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.305467] pci 0000:00:08.1:   bridge window [mem 0xf7600000-0xf78fffff]
[    0.305507] pci 0000:30:00.0: [1022:7901] type 00 class 0x010601
[    0.305542] pci 0000:30:00.0: reg 0x24: [mem 0xf7a00000-0xf7a007ff]
[    0.305552] pci 0000:30:00.0: enabling Extended Tags
[    0.305609] pci 0000:30:00.0: PME# supported from D3hot D3cold
[    0.305731] pci 0000:00:08.2: PCI bridge to [bus 30]
[    0.305735] pci 0000:00:08.2:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.305775] pci 0000:31:00.0: [1022:7901] type 00 class 0x010601
[    0.305810] pci 0000:31:00.0: reg 0x24: [mem 0xf7900000-0xf79007ff]
[    0.305820] pci 0000:31:00.0: enabling Extended Tags
[    0.305877] pci 0000:31:00.0: PME# supported from D3hot D3cold
[    0.305997] pci 0000:00:08.3: PCI bridge to [bus 31]
[    0.306001] pci 0000:00:08.3:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.306300] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.306340] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.306374] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.306419] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.306457] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.306488] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.306519] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.306550] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.307912] iommu: Default domain type: Translated
[    0.307912] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.308049] SCSI subsystem initialized
[    0.308055] libata version 3.00 loaded.
[    0.308055] ACPI: bus type USB registered
[    0.308055] usbcore: registered new interface driver usbfs
[    0.308055] usbcore: registered new interface driver hub
[    0.308055] usbcore: registered new device driver usb
[    0.308055] pps_core: LinuxPPS API ver. 1 registered
[    0.308055] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.308055] PTP clock support registered
[    0.308055] EDAC MC: Ver: 3.0.0
[    0.308055] Registered efivars operations
[    0.308055] NetLabel: Initializing
[    0.308055] NetLabel:  domain hash size = 128
[    0.308055] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.308055] NetLabel:  unlabeled traffic allowed by default
[    0.308055] mctp: management component transport protocol core
[    0.308055] NET: Registered PF_MCTP protocol family
[    0.308055] PCI: Using ACPI for IRQ routing
[    0.309716] PCI: pci_cache_line_size set to 64 bytes
[    0.309800] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.309801] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
[    0.309802] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.309803] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.309804] e820: reserve RAM buffer [mem 0xd695d000-0xd7ffffff]
[    0.309804] e820: reserve RAM buffer [mem 0xd91ff018-0xdbffffff]
[    0.309805] e820: reserve RAM buffer [mem 0xd921f018-0xdbffffff]
[    0.309806] e820: reserve RAM buffer [mem 0xd9d39000-0xdbffffff]
[    0.309807] e820: reserve RAM buffer [mem 0xdbb15000-0xdbffffff]
[    0.309808] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.309808] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[    0.309819] pci 0000:26:00.0: vgaarb: setting as boot VGA device
[    0.309819] pci 0000:26:00.0: vgaarb: bridge control possible
[    0.309819] pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.309819] vgaarb: loaded
[    0.309819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.309819] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.312289] clocksource: Switched to clocksource tsc-early
[    0.312378] VFS: Disk quotas dquot_6.6.0
[    0.312389] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.312434] pnp: PnP ACPI init
[    0.312493] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.312551] system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved
[    0.312713] system 00:03: [io  0x0a00-0x0a0f] has been reserved
[    0.312714] system 00:03: [io  0x0a10-0x0a1f] has been reserved
[    0.312715] system 00:03: [io  0x0a20-0x0a2f] has been reserved
[    0.312716] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.312905] pnp 00:04: [dma 0 disabled]
[    0.313078] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.313079] system 00:05: [io  0x040b] has been reserved
[    0.313080] system 00:05: [io  0x04d6] has been reserved
[    0.313081] system 00:05: [io  0x0c00-0x0c01] has been reserved
[    0.313082] system 00:05: [io  0x0c14] has been reserved
[    0.313083] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.313084] system 00:05: [io  0x0c52] has been reserved
[    0.313085] system 00:05: [io  0x0c6c] has been reserved
[    0.313085] system 00:05: [io  0x0c6f] has been reserved
[    0.313086] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.313087] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.313088] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.313089] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.313090] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.313091] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.313092] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[    0.313093] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.313094] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.313095] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.313096] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.313097] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.313099] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.313100] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.313101] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.313102] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.313103] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.313405] pnp: PnP ACPI: found 6 devices
[    0.317533] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.317578] NET: Registered PF_INET protocol family
[    0.317749] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.319640] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.319666] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.319733] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.319964] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.320060] TCP: Hash tables configured (established 131072 bind 65536)
[    0.320150] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.320202] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.320243] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.320296] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.320300] NET: Registered PF_XDP protocol family
[    0.320309] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.320312] pci 0000:00:01.1:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.320317] pci 0000:20:00.0: PCI bridge to [bus 21]
[    0.320321] pci 0000:20:00.0:   bridge window [mem 0xf7400000-0xf74fffff]
[    0.320329] pci 0000:20:01.0: PCI bridge to [bus 22]
[    0.320331] pci 0000:20:01.0:   bridge window [io  0xf000-0xffff]
[    0.320335] pci 0000:20:01.0:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.320342] pci 0000:20:04.0: PCI bridge to [bus 25]
[    0.320346] pci 0000:20:04.0:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.320353] pci 0000:03:00.2: PCI bridge to [bus 20-25]
[    0.320355] pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
[    0.320359] pci 0000:03:00.2:   bridge window [mem 0xf7200000-0xf74fffff]
[    0.320366] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.320367] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.320370] pci 0000:00:01.3:   bridge window [mem 0xf7200000-0xf75fffff]
[    0.320375] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.320376] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.320379] pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.320381] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf20fffff 64bit pref]
[    0.320385] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.320391] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.320393] pci 0000:00:08.1:   bridge window [mem 0xf7600000-0xf78fffff]
[    0.320398] pci 0000:00:08.2: PCI bridge to [bus 30]
[    0.320400] pci 0000:00:08.2:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.320404] pci 0000:00:08.3: PCI bridge to [bus 31]
[    0.320407] pci 0000:00:08.3:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.320412] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.320413] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.320414] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.320415] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.320416] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.320416] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfec2ffff window]
[    0.320417] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.320418] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff]
[    0.320419] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.320420] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf75fffff]
[    0.320421] pci_bus 0000:20: resource 0 [io  0xf000-0xffff]
[    0.320422] pci_bus 0000:20: resource 1 [mem 0xf7200000-0xf74fffff]
[    0.320423] pci_bus 0000:21: resource 1 [mem 0xf7400000-0xf74fffff]
[    0.320424] pci_bus 0000:22: resource 0 [io  0xf000-0xffff]
[    0.320424] pci_bus 0000:22: resource 1 [mem 0xf7300000-0xf73fffff]
[    0.320425] pci_bus 0000:25: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.320426] pci_bus 0000:26: resource 0 [io  0xe000-0xefff]
[    0.320427] pci_bus 0000:26: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.320428] pci_bus 0000:26: resource 2 [mem 0xe0000000-0xf20fffff 64bit pref]
[    0.320429] pci_bus 0000:28: resource 1 [mem 0xf7600000-0xf78fffff]
[    0.320430] pci_bus 0000:30: resource 1 [mem 0xf7a00000-0xf7afffff]
[    0.320431] pci_bus 0000:31: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.320603] pci 0000:26:00.1: extending delay after power-on from D3hot to 20 msec
[    0.320620] pci 0000:26:00.1: D0 power state depends on 0000:26:00.0
[    0.320674] pci 0000:26:00.2: D0 power state depends on 0000:26:00.0
[    0.320784] pci 0000:26:00.3: D0 power state depends on 0000:26:00.0
[    0.320901] PCI: CLS 64 bytes, default 64
[    0.320908] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.320932] pci 0000:00:01.0: Adding to iommu group 0
[    0.320939] Trying to unpack rootfs image as initramfs...
[    0.320939] pci 0000:00:01.1: Adding to iommu group 1
[    0.320946] pci 0000:00:01.3: Adding to iommu group 2
[    0.320954] pci 0000:00:02.0: Adding to iommu group 3
[    0.320962] pci 0000:00:03.0: Adding to iommu group 4
[    0.320970] pci 0000:00:03.1: Adding to iommu group 5
[    0.320977] pci 0000:00:04.0: Adding to iommu group 6
[    0.320984] pci 0000:00:05.0: Adding to iommu group 7
[    0.320993] pci 0000:00:07.0: Adding to iommu group 8
[    0.321000] pci 0000:00:07.1: Adding to iommu group 9
[    0.321011] pci 0000:00:08.0: Adding to iommu group 10
[    0.321017] pci 0000:00:08.1: Adding to iommu group 11
[    0.321024] pci 0000:00:08.2: Adding to iommu group 12
[    0.321031] pci 0000:00:08.3: Adding to iommu group 13
[    0.321040] pci 0000:00:14.0: Adding to iommu group 14
[    0.321046] pci 0000:00:14.3: Adding to iommu group 14
[    0.321068] pci 0000:00:18.0: Adding to iommu group 15
[    0.321073] pci 0000:00:18.1: Adding to iommu group 15
[    0.321080] pci 0000:00:18.2: Adding to iommu group 15
[    0.321085] pci 0000:00:18.3: Adding to iommu group 15
[    0.321090] pci 0000:00:18.4: Adding to iommu group 15
[    0.321095] pci 0000:00:18.5: Adding to iommu group 15
[    0.321101] pci 0000:00:18.6: Adding to iommu group 15
[    0.321106] pci 0000:00:18.7: Adding to iommu group 15
[    0.321112] pci 0000:01:00.0: Adding to iommu group 16
[    0.321126] pci 0000:03:00.0: Adding to iommu group 17
[    0.321132] pci 0000:03:00.1: Adding to iommu group 17
[    0.321139] pci 0000:03:00.2: Adding to iommu group 17
[    0.321141] pci 0000:20:00.0: Adding to iommu group 17
[    0.321143] pci 0000:20:01.0: Adding to iommu group 17
[    0.321146] pci 0000:20:04.0: Adding to iommu group 17
[    0.321148] pci 0000:21:00.0: Adding to iommu group 17
[    0.321152] pci 0000:22:00.0: Adding to iommu group 17
[    0.321156] pci 0000:25:00.0: Adding to iommu group 17
[    0.321172] pci 0000:26:00.0: Adding to iommu group 18
[    0.321179] pci 0000:26:00.1: Adding to iommu group 18
[    0.321187] pci 0000:26:00.2: Adding to iommu group 18
[    0.321194] pci 0000:26:00.3: Adding to iommu group 18
[    0.321201] pci 0000:27:00.0: Adding to iommu group 19
[    0.321209] pci 0000:28:00.0: Adding to iommu group 20
[    0.321218] pci 0000:28:00.1: Adding to iommu group 21
[    0.321228] pci 0000:28:00.3: Adding to iommu group 22
[    0.321236] pci 0000:28:00.4: Adding to iommu group 23
[    0.321243] pci 0000:30:00.0: Adding to iommu group 24
[    0.321249] pci 0000:31:00.0: Adding to iommu group 25
[    0.325499] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.325503] AMD-Vi: Extended features (0x58f77ef22294ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC
[    0.325508] AMD-Vi: Interrupt remapping enabled
[    0.325508] AMD-Vi: X2APIC enabled
[    0.325519] AMD-Vi: Virtual APIC enabled
[    0.325590] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.325591] software IO TLB: mapped [mem 0x00000000ccc17000-0x00000000d0c17000] (64MB)
[    0.325631] LVT offset 0 assigned for vector 0x400
[    0.325715] perf: AMD IBS detected (0x000003ff)
[    0.325720] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.326772] Initialise system trusted keyrings
[    0.326780] Key type blacklist registered
[    0.326810] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.327616] zbud: loaded
[    0.327764] integrity: Platform Keyring initialized
[    0.327766] integrity: Machine keyring initialized
[    0.330106] Key type asymmetric registered
[    0.330107] Asymmetric key parser 'x509' registered
[    0.374642] Freeing initrd memory: 11292K
[    0.376379] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.376390] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.376421] io scheduler mq-deadline registered
[    0.376423] io scheduler kyber registered
[    0.376445] io scheduler bfq registered
[    0.377651] pcieport 0000:00:01.1: AER: enabled with IRQ 26
[    0.377780] pcieport 0000:00:01.3: AER: enabled with IRQ 27
[    0.377905] pcieport 0000:00:03.1: AER: enabled with IRQ 28
[    0.378088] pcieport 0000:00:07.1: AER: enabled with IRQ 30
[    0.378199] pcieport 0000:00:08.1: AER: enabled with IRQ 31
[    0.378333] pcieport 0000:00:08.2: AER: enabled with IRQ 32
[    0.378465] pcieport 0000:00:08.3: AER: enabled with IRQ 33
[    0.379000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.379083] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.379095] ACPI: button: Power Button [PWRB]
[    0.379114] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.379142] ACPI: button: Power Button [PWRF]
[    0.379875] Estimated ratio of average max frequency by base frequency (times 1024): 1110
[    0.379883] Monitor-Mwait will be used to enter C-1 state
[    0.379887] ACPI: \_PR_.C000: Found 2 idle states
[    0.379951] ACPI: \_PR_.C002: Found 2 idle states
[    0.380025] ACPI: \_PR_.C004: Found 2 idle states
[    0.380080] ACPI: \_PR_.C006: Found 2 idle states
[    0.380139] ACPI: \_PR_.C008: Found 2 idle states
[    0.380216] ACPI: \_PR_.C00A: Found 2 idle states
[    0.380271] ACPI: \_PR_.C001: Found 2 idle states
[    0.380342] ACPI: \_PR_.C003: Found 2 idle states
[    0.380418] ACPI: \_PR_.C005: Found 2 idle states
[    0.380502] ACPI: \_PR_.C007: Found 2 idle states
[    0.380584] ACPI: \_PR_.C009: Found 2 idle states
[    0.380665] ACPI: \_PR_.C00B: Found 2 idle states
[    0.380843] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.380981] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.382064] Non-volatile memory driver v1.3
[    0.382065] Linux agpgart interface v0.103
[    0.430007] AMD-Vi: AMD IOMMUv2 loaded and initialized
[    0.430023] ACPI: bus type drm_connector registered
[    0.430701] ahci 0000:03:00.1: version 3.0
[    0.430786] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    0.430824] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    0.430826] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    0.431136] scsi host0: ahci
[    0.431214] scsi host1: ahci
[    0.431269] scsi host2: ahci
[    0.431324] scsi host3: ahci
[    0.431374] scsi host4: ahci
[    0.431423] scsi host5: ahci
[    0.431475] scsi host6: ahci
[    0.431521] scsi host7: ahci
[    0.431542] ata1: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580100 irq 40
[    0.431544] ata2: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580180 irq 40
[    0.431545] ata3: DUMMY
[    0.431545] ata4: DUMMY
[    0.431546] ata5: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580300 irq 40
[    0.431548] ata6: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580380 irq 40
[    0.431549] ata7: DUMMY
[    0.431549] ata8: DUMMY
[    0.431661] ahci 0000:30:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.431663] ahci 0000:30:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[    0.431753] scsi host8: ahci
[    0.431774] ata9: SATA max UDMA/133 abar m2048@0xf7a00000 port 0xf7a00100 irq 42
[    0.431862] ahci 0000:31:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.431864] ahci 0000:31:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[    0.431952] scsi host9: ahci
[    0.431975] ata10: SATA max UDMA/133 abar m2048@0xf7900000 port 0xf7900100 irq 44
[    0.432034] usbcore: registered new interface driver usbserial_generic
[    0.432036] usbserial: USB Serial support registered for generic
[    0.432068] rtc_cmos 00:02: RTC can wake from S4
[    0.432253] rtc_cmos 00:02: registered as rtc0
[    0.432280] rtc_cmos 00:02: setting system clock to 2023-09-01T17:20:44 UTC (1693588844)
[    0.432298] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.432381] ledtrig-cpu: registered to indicate activity on CPUs
[    0.432494] efifb: probing for efifb
[    0.432503] efifb: showing boot graphics
[    0.443591] efifb: framebuffer at 0xe0000000, using 34560k, total 34560k
[    0.443592] efifb: mode is 3840x2160x32, linelength=16384, pages=1
[    0.443593] efifb: scrolling: redraw
[    0.443593] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.443623] fbcon: Deferring console take-over
[    0.443624] fb0: EFI VGA frame buffer device
[    0.443646] hid: raw HID events driver (C) Jiri Kosina
[    0.443715] drop_monitor: Initializing network drop monitor service
[    0.452824] Initializing XFRM netlink socket
[    0.452887] NET: Registered PF_INET6 protocol family
[    0.454853] Segment Routing with IPv6
[    0.454854] RPL Segment Routing with IPv6
[    0.454860] In-situ OAM (IOAM) with IPv6
[    0.454875] NET: Registered PF_PACKET protocol family
[    0.455378] microcode: CPU0: patch_level=0x08701021
[    0.455382] microcode: CPU1: patch_level=0x08701021
[    0.455385] microcode: CPU2: patch_level=0x08701021
[    0.455389] microcode: CPU3: patch_level=0x08701021
[    0.455394] microcode: CPU4: patch_level=0x08701021
[    0.455399] microcode: CPU5: patch_level=0x08701021
[    0.455403] microcode: CPU6: patch_level=0x08701021
[    0.455407] microcode: CPU7: patch_level=0x08701021
[    0.455411] microcode: CPU8: patch_level=0x08701021
[    0.455415] microcode: CPU9: patch_level=0x08701021
[    0.455420] microcode: CPU10: patch_level=0x08701021
[    0.455425] microcode: CPU11: patch_level=0x08701021
[    0.455428] microcode: Microcode Update Driver: v2.2.
[    0.455518] resctrl: L3 allocation detected
[    0.455519] resctrl: MB allocation detected
[    0.455519] resctrl: L3 monitoring detected
[    0.455522] IPI shorthand broadcast: enabled
[    0.455538] sched_clock: Marking stable (455255572, 254522)->(459074813, -3564719)
[    0.455811] registered taskstats version 1
[    0.455944] Loading compiled-in X.509 certificates
[    0.458246] Loaded X.509 cert 'Build time autogenerated kernel key: f2337da87c21f87869b56679ddfe3bf321e9104e'
[    0.459207] zswap: loaded using pool lz4/z3fold
[    0.459346] Key type .fscrypt registered
[    0.459348] Key type fscrypt-provisioning registered
[    0.460723] PM:   Magic number: 7:168:339
[    0.460861] RAS: Correctable Errors collector initialized.
[    0.746801] ata9: SATA link down (SStatus 0 SControl 300)
[    0.747704] ata1: SATA link down (SStatus 0 SControl 300)
[    0.749078] ata10: SATA link down (SStatus 0 SControl 300)
[    1.064373] ata2: SATA link down (SStatus 0 SControl 300)
[    1.334022] tsc: Refined TSC clocksource calibration: 3599.999 MHz
[    1.334037] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4525366a, max_idle_ns: 440795257657 ns
[    1.334077] clocksource: Switched to clocksource tsc
[    1.377968] ata5: SATA link down (SStatus 0 SControl 300)
[    1.687975] ata6: SATA link down (SStatus 0 SControl 300)
[    1.689119] Freeing unused decrypted memory: 2036K
[    1.689390] Freeing unused kernel image (initmem) memory: 2148K
[    1.689394] Write protecting the kernel read-only data: 30720k
[    1.689775] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    1.689871] Freeing unused kernel image (rodata/data gap) memory: 680K
[    1.720998] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.721002] rodata_test: all tests were successful
[    1.721005] Run /init as init process
[    1.721007]   with arguments:
[    1.721008]     /init
[    1.721008]     showopts
[    1.721009]   with environment:
[    1.721009]     HOME=/
[    1.721010]     TERM=linux
[    1.721010]     splash=silent
[    1.816208] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.816214] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    1.827875] nvme nvme0: pci function 0000:01:00.0
[    1.827919] nvme nvme1: pci function 0000:25:00.0
[    1.832399] nvme nvme0: missing or invalid SUBNQN field.
[    1.832411] nvme nvme1: Shutdown timeout set to 10 seconds
[    1.832422] nvme nvme0: Shutdown timeout set to 10 seconds
[    1.833842] nvme nvme1: 8/0/0 default/read/poll queues
[    1.833901] nvme nvme0: 8/0/0 default/read/poll queues
[    1.834786] nvme nvme1: Ignoring bogus Namespace Identifiers
[    1.834851] nvme nvme0: Ignoring bogus Namespace Identifiers
[    1.835253]  nvme1n1: p1 p2
[    1.838471]  nvme0n1: p1 p2 p3 p4
[    1.871557] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    1.871739] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.871743] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    1.871746] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.871803] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    1.871805] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.871807] usb usb1: Product: xHCI Host Controller
[    1.871808] usb usb1: Manufacturer: Linux 6.1.50-1-lts xhci-hcd
[    1.871809] usb usb1: SerialNumber: 0000:03:00.0
[    1.871899] hub 1-0:1.0: USB hub found
[    1.871913] hub 1-0:1.0: 10 ports detected
[    1.872305] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.872318] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    1.872319] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.872320] usb usb2: Product: xHCI Host Controller
[    1.872321] usb usb2: Manufacturer: Linux 6.1.50-1-lts xhci-hcd
[    1.872322] usb usb2: SerialNumber: 0000:03:00.0
[    1.872367] hub 2-0:1.0: USB hub found
[    1.872373] hub 2-0:1.0: 4 ports detected
[    1.872721] xhci_hcd 0000:26:00.2: xHCI Host Controller
[    1.872724] xhci_hcd 0000:26:00.2: new USB bus registered, assigned bus number 3
[    1.873345] xhci_hcd 0000:26:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    1.873456] xhci_hcd 0000:26:00.2: xHCI Host Controller
[    1.873457] xhci_hcd 0000:26:00.2: new USB bus registered, assigned bus number 4
[    1.873458] xhci_hcd 0000:26:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    1.873492] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    1.873493] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.873494] usb usb3: Product: xHCI Host Controller
[    1.873495] usb usb3: Manufacturer: Linux 6.1.50-1-lts xhci-hcd
[    1.873495] usb usb3: SerialNumber: 0000:26:00.2
[    1.873538] hub 3-0:1.0: USB hub found
[    1.873543] hub 3-0:1.0: 2 ports detected
[    1.873652] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.873664] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    1.873665] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.873666] usb usb4: Product: xHCI Host Controller
[    1.873667] usb usb4: Manufacturer: Linux 6.1.50-1-lts xhci-hcd
[    1.873668] usb usb4: SerialNumber: 0000:26:00.2
[    1.873709] hub 4-0:1.0: USB hub found
[    1.873717] hub 4-0:1.0: 4 ports detected
[    1.873849] xhci_hcd 0000:28:00.3: xHCI Host Controller
[    1.873851] xhci_hcd 0000:28:00.3: new USB bus registered, assigned bus number 5
[    1.873958] xhci_hcd 0000:28:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[    1.874232] xhci_hcd 0000:28:00.3: xHCI Host Controller
[    1.874234] xhci_hcd 0000:28:00.3: new USB bus registered, assigned bus number 6
[    1.874235] xhci_hcd 0000:28:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    1.874257] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    1.874259] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.874259] usb usb5: Product: xHCI Host Controller
[    1.874260] usb usb5: Manufacturer: Linux 6.1.50-1-lts xhci-hcd
[    1.874261] usb usb5: SerialNumber: 0000:28:00.3
[    1.874315] hub 5-0:1.0: USB hub found
[    1.874321] hub 5-0:1.0: 4 ports detected
[    1.874425] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.874437] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    1.874438] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.874439] usb usb6: Product: xHCI Host Controller
[    1.874440] usb usb6: Manufacturer: Linux 6.1.50-1-lts xhci-hcd
[    1.874440] usb usb6: SerialNumber: 0000:28:00.3
[    1.874489] hub 6-0:1.0: USB hub found
[    1.874494] hub 6-0:1.0: 4 ports detected
[    1.883368] fbcon: Taking over console
[    1.883412] Console: switching to colour frame buffer device 240x67
[    1.945856] EXT4-fs (nvme1n1p1): mounted filesystem with ordered data mode. Quota mode: none.
[    2.007823] systemd[1]: systemd 254.1-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    2.007827] systemd[1]: Detected architecture x86-64.
[    2.008440] systemd[1]: Hostname set to <Archate>.
[    2.123593] usb 5-2: new low-speed USB device number 2 using xhci_hcd
[    2.190258] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    2.281348] usb 5-2: New USB device found, idVendor=1a2c, idProduct=0e24, bcdDevice= 1.10
[    2.281351] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.281353] usb 5-2: Product: USB Keyboard
[    2.281354] usb 5-2: Manufacturer: SEM
[    2.421120] usb 1-2: New USB device found, idVendor=056a, idProduct=037f, bcdDevice= 2.34
[    2.421126] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.421128] usb 1-2: Product: Wacom Cintiq Pro 24 Pen Hub
[    2.421129] usb 1-2: Manufacturer: Wacom Co., Ltd.
[    2.427138] hub 1-2:1.0: USB hub found
[    2.430109] hub 1-2:1.0: 5 ports detected
[    2.430274] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[    2.531858] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[    2.552121] usb 2-2: New USB device found, idVendor=056a, idProduct=0386, bcdDevice= 2.34
[    2.552127] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.552128] usb 2-2: Product: Wacom Cintiq Pro 24 Pen Hub
[    2.552129] usb 2-2: Manufacturer: Wacom Co., Ltd.
[    2.558154] hub 2-2:1.0: USB hub found
[    2.558634] hub 2-2:1.0: 3 ports detected
[    2.590289] usb 5-3: New USB device found, idVendor=1462, idProduct=7b85, bcdDevice= 0.01
[    2.590295] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.590296] usb 5-3: Product: PRO CARBON 12
[    2.590297] usb 5-3: Manufacturer: MSI
[    2.590298] usb 5-3: SerialNumber: A02018061512
[    2.620746] systemd[1]: bpf-lsm: LSM BPF program attached
[    2.689318] systemd[1]: Queued start job for default target Graphical Interface.
[    2.710881] systemd[1]: Created slice Slice /system/getty.
[    2.711086] systemd[1]: Created slice Slice /system/modprobe.
[    2.711263] systemd[1]: Created slice Slice /system/systemd-fsck.
[    2.711440] systemd[1]: Created slice User and Session Slice.
[    2.711473] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.711500] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.711594] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.711611] systemd[1]: Reached target Local Encrypted Volumes.
[    2.711619] systemd[1]: Reached target Login Prompts.
[    2.711627] systemd[1]: Reached target Local Integrity Protected Volumes.
[    2.711639] systemd[1]: Reached target Path Units.
[    2.711647] systemd[1]: Reached target Remote File Systems.
[    2.711653] systemd[1]: Reached target Slice Units.
[    2.711661] systemd[1]: Reached target Swaps.
[    2.711672] systemd[1]: Reached target Local Verity Protected Volumes.
[    2.711705] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.711832] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.712476] systemd[1]: Listening on Process Core Dump Socket.
[    2.712533] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.712586] systemd[1]: Listening on Journal Socket.
[    2.712727] systemd[1]: Listening on udev Control Socket.
[    2.712776] systemd[1]: Listening on udev Kernel Socket.
[    2.713254] systemd[1]: Mounting Huge Pages File System...
[    2.713726] systemd[1]: Mounting POSIX Message Queue File System...
[    2.714227] systemd[1]: Mounting Kernel Debug File System...
[    2.714694] systemd[1]: Mounting Kernel Trace File System...
[    2.715265] systemd[1]: Mounting Temporary Directory /tmp...
[    2.715831] systemd[1]: Starting Create List of Static Device Nodes...
[    2.716311] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    2.716803] systemd[1]: Starting Load Kernel Module configfs...
[    2.717332] systemd[1]: Starting Load Kernel Module dm_mod...
[    2.717826] systemd[1]: Starting Load Kernel Module drm...
[    2.718350] systemd[1]: Starting Load Kernel Module fuse...
[    2.718887] systemd[1]: Starting Load Kernel Module loop...
[    2.718918] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    2.719792] systemd[1]: Starting Journal Service...
[    2.720621] systemd[1]: Starting Load Kernel Modules...
[    2.720648] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[    2.721208] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.721798] systemd[1]: Starting Coldplug All udev Devices...
[    2.722653] systemd[1]: Mounted Huge Pages File System.
[    2.722715] systemd[1]: Mounted POSIX Message Queue File System.
[    2.722758] systemd[1]: Mounted Kernel Debug File System.
[    2.722797] systemd[1]: Mounted Kernel Trace File System.
[    2.722838] systemd[1]: Mounted Temporary Directory /tmp.
[    2.723432] loop: module loaded
[    2.725399] EXT4-fs (nvme1n1p1): re-mounted. Quota mode: none.
[    2.727848] device-mapper: uevent: version 1.0.3
[    2.727901] systemd-journald[340]: Collecting audit messages is disabled.
[    2.727941] fuse: init (API version 7.37)
[    2.727951] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    2.743603] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    2.760404] systemd[1]: Finished Create List of Static Device Nodes.
[    2.760885] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    2.803624] usb 5-4: new full-speed USB device number 4 using xhci_hcd
[    2.813696] systemd[1]: Finished Load Kernel Module configfs.
[    2.813813] systemd[1]: Started Journal Service.
[    2.968162] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[    2.968166] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.968168] usb 1-4: Product: USB 2.0 Hub [MTT]
[    2.975173] hub 1-4:1.0: USB hub found
[    2.976265] usb 5-4: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
[    2.976268] usb 5-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.978151] hub 1-4:1.0: 4 ports detected
[    3.033800] usb 1-2.1: new high-speed USB device number 4 using xhci_hcd
[    3.053912] systemd-journald[340]: Received client request to flush runtime journal.
[    3.066886] systemd-journald[340]: /var/log/journal/44ba60a9647845ba9b43f8bf6704df0c/system.journal: Boot ID changed since last record, rotating.
[    3.066889] systemd-journald[340]: Rotating system journal.
[    3.174176] usb 1-2.1: New USB device found, idVendor=056a, idProduct=0380, bcdDevice= 1.44
[    3.174179] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.174181] usb 1-2.1: Product: CintiqPro 24Hub2
[    3.174182] usb 1-2.1: Manufacturer: Wacom Co., Ltd.
[    3.182196] hub 1-2.1:1.0: USB hub found
[    3.186175] hub 1-2.1:1.0: 2 ports detected
[    3.231577] usb 2-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[    3.272448] usb 2-2.1: New USB device found, idVendor=056a, idProduct=0387, bcdDevice= 1.44
[    3.272450] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.272452] usb 2-2.1: Product: CintiqPro 24Hub2
[    3.272453] usb 2-2.1: Manufacturer: Wacom Co., Ltd.
[    3.285459] hub 2-2.1:1.0: USB hub found
[    3.287197] hub 2-2.1:1.0: 2 ports detected
[    3.331585] acpi_cpufreq: overriding BIOS provided _PSD data
[    3.369829] dca service started, version 1.12.1
[    3.370180] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    3.370186] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    3.370240] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    3.371550] nvidia-gpu 0000:26:00.3: enabling device (0000 -> 0002)
[    3.379326] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    3.381565] ccp 0000:28:00.1: enabling device (0000 -> 0002)
[    3.384044] ccp 0000:28:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[    3.384065] ccp 0000:28:00.1: psp enabled
[    3.390957] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    3.391068] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[    3.393692] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    3.420443] igb: Intel(R) Gigabit Ethernet Network Driver
[    3.420448] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.420483] igb 0000:22:00.0: enabling device (0000 -> 0002)
[    3.449763] pps pps0: new PPS source ptp0
[    3.449783] igb 0000:22:00.0: added PHC on eth0
[    3.449808] igb 0000:22:00.0: Intel(R) Gigabit Ethernet Network Connection
[    3.449809] igb 0000:22:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:d8:61:4f:04:77
[    3.449811] igb 0000:22:00.0: eth0: PBA No: FFFFFF-0FF
[    3.449812] igb 0000:22:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[    3.460727] usb 1-9: new full-speed USB device number 5 using xhci_hcd
[    3.464553] igb 0000:22:00.0 enp34s0: renamed from eth0
[    3.466459] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/usb5/5-2/5-2:1.0/0003:1A2C:0E24.0001/input/input3
[    3.472119] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    3.472122] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.485957] cryptd: max_cpu_qlen set to 1000
[    3.504150] Bluetooth: Core ver 2.22
[    3.504166] NET: Registered PF_BLUETOOTH protocol family
[    3.504167] Bluetooth: HCI device and connection manager initialized
[    3.504171] Bluetooth: HCI socket layer initialized
[    3.504173] Bluetooth: L2CAP socket layer initialized
[    3.504176] Bluetooth: SCO socket layer initialized
[    3.508516] ucsi_ccg 3-0008: failed to get FW build information
[    3.510940] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.513692] AVX2 version of gcm_enc/dec engaged.
[    3.513701] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.513741] AES CTR mode by8 optimization enabled
[    3.514522] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.514526] cfg80211: failed to load regulatory.db
[    3.520798] hid-generic 0003:1A2C:0E24.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:28:00.3-2/input0
[    3.526522] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/usb5/5-2/5-2:1.1/0003:1A2C:0E24.0002/input/input4
[    3.536679] Intel(R) Wireless WiFi driver for Linux
[    3.540769] usbcore: registered new interface driver btusb
[    3.547055] snd_hda_intel 0000:26:00.1: enabling device (0000 -> 0002)
[    3.547126] snd_hda_intel 0000:26:00.1: Disabling MSI
[    3.547134] snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client
[    3.547266] snd_hda_intel 0000:28:00.4: enabling device (0000 -> 0002)
[    3.548121] iwlwifi 0000:21:00.0: enabling device (0000 -> 0002)
[    3.561334] iwlwifi 0000:21:00.0: WRT: Overriding region id 0
[    3.561338] iwlwifi 0000:21:00.0: WRT: Overriding region id 1
[    3.561339] iwlwifi 0000:21:00.0: WRT: Overriding region id 2
[    3.561341] iwlwifi 0000:21:00.0: WRT: Overriding region id 3
[    3.561342] iwlwifi 0000:21:00.0: WRT: Overriding region id 4
[    3.561343] iwlwifi 0000:21:00.0: WRT: Overriding region id 6
[    3.561345] iwlwifi 0000:21:00.0: WRT: Overriding region id 8
[    3.561346] iwlwifi 0000:21:00.0: WRT: Overriding region id 9
[    3.561347] iwlwifi 0000:21:00.0: WRT: Overriding region id 10
[    3.561348] iwlwifi 0000:21:00.0: WRT: Overriding region id 11
[    3.561350] iwlwifi 0000:21:00.0: WRT: Overriding region id 15
[    3.561351] iwlwifi 0000:21:00.0: WRT: Overriding region id 16
[    3.561352] iwlwifi 0000:21:00.0: WRT: Overriding region id 18
[    3.561353] iwlwifi 0000:21:00.0: WRT: Overriding region id 19
[    3.561354] iwlwifi 0000:21:00.0: WRT: Overriding region id 20
[    3.561356] iwlwifi 0000:21:00.0: WRT: Overriding region id 21
[    3.561357] iwlwifi 0000:21:00.0: WRT: Overriding region id 28
[    3.561653] iwlwifi 0000:21:00.0: loaded firmware version 46.ff18e32a.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
[    3.564411] Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
[    3.564426] Bluetooth: hci0: Boot Address: 0x40800
[    3.564427] Bluetooth: hci0: Firmware Version: 108-45.22
[    3.564428] Bluetooth: hci0: Firmware already loaded
[    3.583215] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/usb5/5-2/5-2:1.1/0003:1A2C:0E24.0002/input/input5
[    3.583505] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:28:00.3-2/input1
[    3.589042] input: MSI PRO CARBON 12 as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/usb5/5-3/5-3:1.0/0003:1462:7B85.0003/input/input6
[    3.589132] hid-generic 0003:1462:7B85.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [MSI PRO CARBON 12] on usb-0000:28:00.3-3/input0
[    3.589175] usbcore: registered new interface driver usbhid
[    3.589177] usbhid: USB HID core driver
[    3.643628] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input7
[    3.643667] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input8
[    3.643700] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input9
[    3.643729] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input10
[    3.650758] SVM: TSC scaling supported
[    3.650760] kvm: Nested Virtualization enabled
[    3.650761] SVM: kvm: Nested Paging enabled
[    3.650763] SEV supported: 509 ASIDs
[    3.650791] SVM: Virtual VMLOAD VMSAVE supported
[    3.650791] SVM: Virtual GIF supported
[    3.650792] SVM: LBR virtualization supported
[    3.650821] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    3.650825] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.650827] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.650829] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    3.650830] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    3.650831] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    3.650832] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    3.650833] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    3.650834] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    3.660315] MCE: In-kernel MCE decoding enabled.
[    3.670644] EXT4-fs (nvme1n1p2): mounted filesystem with ordered data mode. Quota mode: none.
[    3.671702] iwlwifi 0000:21:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x321
[    3.671754] thermal thermal_zone0: failed to read out thermal zone (-61)
[    3.675580] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.4/sound/card1/input11
[    3.675619] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.4/sound/card1/input12
[    3.675651] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:28:00.4/sound/card1/input13
[    3.675977] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:28:00.4/sound/card1/input14
[    3.676189] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:28:00.4/sound/card1/input15
[    3.676293] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:28:00.4/sound/card1/input16
[    3.676412] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:28:00.4/sound/card1/input17
[    3.678334] intel_rapl_common: Found RAPL domain package
[    3.678337] intel_rapl_common: Found RAPL domain core
[    3.718785] iwlwifi 0000:21:00.0: base HW address: d4:3b:04:71:58:27, OTP minor version: 0x4
[    3.785110] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.788068] usb 1-9: New USB device found, idVendor=062a, idProduct=4102, bcdDevice= 1.03
[    3.788071] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.788072] usb 1-9: Product: 2.4G Wireless Mouse
[    3.788074] usb 1-9: Manufacturer: MOSART Semi.
[    3.788193] iwlwifi 0000:21:00.0 wlo1: renamed from wlan0
[    3.818944] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.0/0003:062A:4102.0004/input/input18
[    3.818987] input: MOSART Semi. 2.4G Wireless Mouse Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.0/0003:062A:4102.0004/input/input19
[    3.836931] usb 1-2.2: new high-speed USB device number 6 using xhci_hcd
[    3.873640] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.0/0003:062A:4102.0004/input/input20
[    3.873708] hid-generic 0003:062A:4102.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:03:00.0-9/input0
[    3.888281] mousedev: PS/2 mouse device common for all mice
[    3.962313] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.962315] Bluetooth: BNEP filters: protocol multicast
[    3.962318] Bluetooth: BNEP socket layer initialized
[    3.962917] Bluetooth: MGMT ver 1.22
[    3.967387] NET: Registered PF_ALG protocol family
[    3.970274] usb 1-2.2: New USB device found, idVendor=056a, idProduct=0381, bcdDevice= 1.43
[    3.970277] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.970279] usb 1-2.2: Product: CintiqPro 24Hub1
[    3.970280] usb 1-2.2: Manufacturer: Wacom Co., Ltd.
[    3.981302] hub 1-2.2:1.0: USB hub found
[    3.985272] hub 1-2.2:1.0: 4 ports detected
[    4.130267] usb 1-4.2: new high-speed USB device number 7 using xhci_hcd
[    4.382342] usb 1-4.2: New USB device found, idVendor=1c75, idProduct=af90, bcdDevice= 1.05
[    4.382348] usb 1-4.2: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[    4.382350] usb 1-4.2: Product: MiniFuse 2
[    4.382352] usb 1-4.2: Manufacturer: ARTURIA
[    4.382353] usb 1-4.2: SerialNumber: 8841400907055899
[    4.421536] usb 2-2.2: new SuperSpeed USB device number 4 using xhci_hcd
[    4.431013] mc: Linux media interface: v0.10
[    4.458594] usb 2-2.2: New USB device found, idVendor=056a, idProduct=0388, bcdDevice= 1.43
[    4.458599] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.458602] usb 2-2.2: Product: CintiqPro 24Hub1
[    4.458603] usb 2-2.2: Manufacturer: Wacom Co., Ltd.
[    4.473857] hub 2-2.2:1.0: USB hub found
[    4.475842] hub 2-2.2:1.0: 3 ports detected
[    4.508943] nvidia-gpu 0000:26:00.3: i2c timeout error e0000000
[    4.508948] ucsi_ccg 3-0008: i2c_transfer failed -110
[    4.508951] ucsi_ccg 3-0008: ucsi_ccg_init failed - -110
[    4.508954] ucsi_ccg: probe of 3-0008 failed with error -110
[    4.523601] usb 1-2.1.2: new full-speed USB device number 8 using xhci_hcd
[    4.719753] usbcore: registered new interface driver snd-usb-audio
[    4.790269] usb 1-2.4: new high-speed USB device number 9 using xhci_hcd
[    4.838395] usb 1-2.1.2: New USB device found, idVendor=056a, idProduct=0331, bcdDevice= 0.04
[    4.838400] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.838403] usb 1-2.1.2: Product: ExpressKey Remote
[    4.838404] usb 1-2.1.2: Manufacturer: Wacom Co.,Ltd.
[    4.864619] hid-generic 0003:056A:0331.0005: hidraw4: USB HID v1.10 Device [Wacom Co.,Ltd. ExpressKey Remote ] on usb-0000:03:00.0-2.1.2/input0
[    4.961430] usb 1-2.4: New USB device found, idVendor=0403, idProduct=6014, bcdDevice= 9.00
[    4.961438] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.961440] usb 1-2.4: Product: Single RS232-HS
[    4.961442] usb 1-2.4: Manufacturer: FTDI
[    5.047406] usb 1-2.2.4: new high-speed USB device number 10 using xhci_hcd
[    5.309464] usb 1-2.2.4: New USB device found, idVendor=0bda, idProduct=4088, bcdDevice= 0.06
[    5.309470] usb 1-2.2.4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    5.309471] usb 1-2.2.4: Product: USB Audio
[    5.309473] usb 1-2.2.4: Manufacturer: Generic
[    5.359403] usb 2-2.2.2: new SuperSpeed USB device number 5 using xhci_hcd
[    5.410998] usb 2-2.2.2: New USB device found, idVendor=0bda, idProduct=0329, bcdDevice=29.08
[    5.411006] usb 2-2.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.411008] usb 2-2.2.2: Product: USB3.0 Card Reader
[    5.411011] usb 2-2.2.2: Manufacturer: Realtek
[    5.411012] usb 2-2.2.2: SerialNumber: 2000000045DB
[    5.457525] usb-storage 2-2.2.2:1.0: USB Mass Storage device detected
[    5.457680] scsi host10: usb-storage 2-2.2.2:1.0
[    5.457748] usbcore: registered new interface driver usb-storage
[    5.464220] usbcore: registered new interface driver uas
[    5.466642] input: Generic USB Audio Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.2/0003:0BDA:4088.0006/input/input21
[    5.520362] input: Generic USB Audio as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.2/0003:0BDA:4088.0006/input/input22
[    5.520429] hid-generic 0003:0BDA:4088.0006: input,hiddev98,hidraw5: USB HID v1.11 Device [Generic USB Audio] on usb-0000:03:00.0-2.2.4/input2
[    5.526934] usb 1-2.5: new full-speed USB device number 11 using xhci_hcd
[    5.868962] usb 1-2.5: New USB device found, idVendor=056a, idProduct=037c, bcdDevice= 1.10
[    5.868970] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.868972] usb 1-2.5: Product: Wacom Cintiq Pro 24
[    5.868974] usb 1-2.5: Manufacturer: Wacom Co.,Ltd.
[    5.868976] usb 1-2.5: SerialNumber: 8IH00F1002780
[    5.943006] input: Wacom Co.,Ltd. Wacom Cintiq Pro 24 Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2.5/1-2.5:1.0/0003:056A:037C.0007/input/input23
[    5.943129] input: Wacom Co.,Ltd. Wacom Cintiq Pro 24 Stylus as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2.5/1-2.5:1.0/0003:056A:037C.0007/input/input24
[    5.943192] input: Wacom Co.,Ltd. Wacom Cintiq Pro 24 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2.5/1-2.5:1.0/0003:056A:037C.0007/input/input25
[    5.943298] hid-generic 0003:056A:037C.0007: input,hiddev99,hidraw6: USB HID v1.10 Mouse [Wacom Co.,Ltd. Wacom Cintiq Pro 24] on usb-0000:03:00.0-2.5/input0
[    5.960264] wacom 0003:056A:0331.0005: hidraw4: USB HID v1.10 Device [Wacom Co.,Ltd. ExpressKey Remote ] on usb-0000:03:00.0-2.1.2/input0
[    5.962904] usbcore: registered new interface driver ftdi_sio
[    5.962916] usbserial: USB Serial support registered for FTDI USB Serial Device
[    5.963042] ftdi_sio 1-2.4:1.0: FTDI USB Serial Device converter detected
[    5.963075] usb 1-2.4: Detected FT232H
[    5.973625] usb 1-2.4: FTDI USB Serial Device converter now attached to ttyUSB0
[    6.178747] input: Wacom Cintiq Pro 24 Pen as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2.5/1-2.5:1.0/0003:056A:037C.0007/input/input29
[    6.178858] input: Wacom Cintiq Pro 24 Pad as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2.5/1-2.5:1.0/0003:056A:037C.0007/input/input31
[    6.178994] wacom 0003:056A:037C.0007: hidraw6: USB HID v1.10 Mouse [Wacom Co.,Ltd. Wacom Cintiq Pro 24] on usb-0000:03:00.0-2.5/input0
[    6.409012] input: Wacom Express Key Remote Pad as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/0003:056A:0331.0005/input/input32
[    6.496929] scsi 10:0:0:0: Direct-Access     Generic- USB3.0 CRW       1.00 PQ: 0 ANSI: 6
[    6.497037] sd 10:0:0:0: Attached scsi generic sg0 type 0
[    6.500516] sd 10:0:0:0: [sda] Media removed, stopped polling
[    6.500793] sd 10:0:0:0: [sda] Attached SCSI removable disk
[    7.926437] wlo1: authenticate with 48:d3:43:db:c7:17
[    7.928691] wlo1: send auth to 48:d3:43:db:c7:17 (try 1/3)
[    8.009693] wlo1: authenticated
[    8.010277] wlo1: associate with 48:d3:43:db:c7:17 (try 1/3)
[    8.014758] wlo1: RX AssocResp from 48:d3:43:db:c7:17 (capab=0x1511 status=0 aid=3)
[    8.016404] wlo1: associated
[    8.120472] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 48:d3:43:db:c7:17
[    8.137171] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   21.707499] [UFW BLOCK] IN=wlo1 OUT= MAC=01:00:5e:00:00:01:48:d3:43:db:c7:18:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=2608 PROTO=2
[   34.211031] systemd-journald[340]: Time jumped backwards, rotating.

---

Its a sick world we live in....

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 76,104

Re: Cannot start xorg after update

Please use [code][/code] tags. Edit your post in this regard.

There's a suspicious lack of nvidia and drm kernel messages in that dmesg, can you still boot the multi-user.target (2nd link below)?
In doubt along "nomodeset"?

Instead of the dmesg, try to upload a complete system journal

sudo journalctl -b | curl -F 'file=@-' 0x0.st

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc