[SOLVED] Systemd-remount-fs service fails after system reinstall

theRedCyclops · 2023-10-19 15:39:34

I have recently noticed after an issue configuring unified kernel images for secure boot where systemd-remount-fs.service fails with:

Oct 19 14:54:50 archlinux systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 19 14:54:50 archlinux systemd-remount-fs[1135]: mount: /: mount point not mounted or bad option.
Oct 19 14:54:50 archlinux systemd-remount-fs[1135]:        dmesg(1) may have more information after failed mount system call.
Oct 19 14:54:50 archlinux systemd-remount-fs[1133]: /usr/bin/mount for / exited with exit status 32.
Oct 19 14:54:50 archlinux systemd[1]: systemd-remount-fs.service: Main process exited, code=exited, status=1/FAILURE
Oct 19 14:54:50 archlinux systemd[1]: systemd-remount-fs.service: Failed with result 'exit-code'.
Oct 19 14:54:50 archlinux systemd[1]: Failed to start Remount Root and Kernel File Systems.

I haven't managed to get it working.
It doesn't seem like it's causing any issues for now, but I would prefer not to leave the system in a degraded state, any help would be greatly appreciated!
(Output of Dmesg)

[ 4081.257987] systemd[1]: Detected architecture x86-64.
[ 4081.259851] systemd[1]: Hostname set to <archlinux>.
[ 4081.331663] systemd[1]: bpf-lsm: LSM BPF program attached
[ 4081.404136] zram_generator::config[901]: No configuration found.
[ 4081.449878] systemd[1]: Queued start job for default target Graphical Interface.
[ 4081.456709] systemd[1]: Created slice Slice /system/getty.
[ 4081.457427] systemd[1]: Created slice Slice /system/modprobe.
[ 4081.457662] systemd[1]: Created slice Encrypted Volume Units Service Slice.
[ 4081.457851] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 4081.458003] systemd[1]: Created slice User and Session Slice.
[ 4081.458063] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4081.458113] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4081.458228] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4081.458279] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 4081.458310] systemd[1]: Reached target Path Units.
[ 4081.458334] systemd[1]: Reached target Remote File Systems.
[ 4081.458357] systemd[1]: Reached target Slice Units.
[ 4081.458383] systemd[1]: Reached target Local Verity Protected Volumes.
[ 4081.458437] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4081.458618] systemd[1]: Listening on LVM2 poll daemon socket.
[ 4081.459158] systemd[1]: Listening on Process Core Dump Socket.
[ 4081.459256] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4081.459339] systemd[1]: Listening on Journal Socket.
[ 4081.459426] systemd[1]: Listening on Network Service Netlink Socket.
[ 4081.459943] systemd[1]: Listening on udev Control Socket.
[ 4081.460025] systemd[1]: Listening on udev Kernel Socket.
[ 4081.460510] systemd[1]: Mounting Huge Pages File System...
[ 4081.460985] systemd[1]: Mounting POSIX Message Queue File System...
[ 4081.461457] systemd[1]: Mounting Kernel Debug File System...
[ 4081.461969] systemd[1]: Mounting Kernel Trace File System...
[ 4081.462467] systemd[1]: Starting Load AppArmor profiles...
[ 4081.462972] systemd[1]: Starting Create List of Static Device Nodes...
[ 4081.463445] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 4081.463952] systemd[1]: Starting Load Kernel Module configfs...
[ 4081.464436] systemd[1]: Starting Load Kernel Module dm_mod...
[ 4081.464926] systemd[1]: Starting Load Kernel Module drm...
[ 4081.465409] systemd[1]: Starting Load Kernel Module fuse...
[ 4081.466011] systemd[1]: Starting Load Kernel Module loop...
[ 4081.466091] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 4081.466986] systemd[1]: Starting Journal Service...
[ 4081.469975] loop: module loaded
[ 4081.470800] systemd[1]: Starting Load Kernel Modules...
[ 4081.471409] fuse: init (API version 7.38)
[ 4081.471437] systemd[1]: Starting Generate network units from Kernel command line...
[ 4081.472443] systemd-journald[916]: Collecting audit messages is disabled.
[ 4081.475156] systemd[1]: Starting TPM2 PCR Machine ID Measurement...
[ 4081.475961] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4081.476775] systemd[1]: Starting Coldplug All udev Devices...
[ 4081.478051] systemd[1]: Mounted Huge Pages File System.
[ 4081.478447] systemd[1]: Mounted POSIX Message Queue File System.
[ 4081.478814] systemd[1]: Mounted Kernel Debug File System.
[ 4081.479196] systemd[1]: Mounted Kernel Trace File System.
[ 4081.479316] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4081.479334] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4081.486409] systemd[1]: Finished Create List of Static Device Nodes.
[ 4081.487120] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 4081.500408] systemd[1]: Finished Load Kernel Module configfs.
[ 4081.501088] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 4081.513423] systemd[1]: Finished Load Kernel Module dm_mod.
[ 4081.531388] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 4081.532008] systemd[1]: Started Journal Service.
[ 4081.676730] systemd-journald[916]: Received client request to flush runtime journal.
[ 4081.677719] Adding 33554428k swap on /.swap.  Priority:-2 extents:258 across:50192384k SSFS
[ 4081.681785] systemd-journald[916]: /var/log/journal/6782ca94dfe3413abca77d5459136705/system.journal: Journal file uses a different sequence number ID, rotating.
[ 4081.681788] systemd-journald[916]: Rotating system journal.
[ 4081.861427] mt7921e 0000:0b:00.0 wlp11s0: renamed from wlan0
[ 4081.868512] r8169 0000:0a:00.0 eno1: renamed from eth0
[ 4081.872074] mousedev: PS/2 mouse device common for all mice
[ 4081.898420] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4081.898423] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 4081.899524] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 4081.902541] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 4081.905002] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 4081.905079] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 4081.905147] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 4081.916716] i8042: PNP: No PS/2 controller found.
[ 4081.939463] asus_wmi: ASUS WMI generic driver loaded
[ 4081.939798] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4081.939978] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 4081.939980] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 4081.942825] asus_wmi: SFUN value: 0x1
[ 4081.942829] eeepc-wmi eeepc-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 4081.943689] asus_wmi: SFUN value: 0x1
[ 4081.943693] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 4081.943696] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[ 4081.943743] asus_wmi: Failed to get WMI notify code: AE_NOT_FOUND
[ 4081.943745] asus_wmi: Failed to get event during flush: -5
[ 4081.943841] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[ 4081.945159] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input11
[ 4081.948221] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-a00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-a00:00, irq=MAC)
[ 4081.961380] mc: Linux media interface: v0.10
[ 4081.961635] Bluetooth: Core ver 2.22
[ 4081.961658] NET: Registered PF_BLUETOOTH protocol family
[ 4081.961659] Bluetooth: HCI device and connection manager initialized
[ 4081.961665] Bluetooth: HCI socket layer initialized
[ 4081.961668] Bluetooth: L2CAP socket layer initialized
[ 4081.961672] Bluetooth: SCO socket layer initialized
[ 4081.998252] kvm_amd: TSC scaling supported
[ 4081.998255] kvm_amd: Nested Virtualization enabled
[ 4081.998257] kvm_amd: Nested Paging enabled
[ 4081.998263] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 4081.998264] kvm_amd: Virtual GIF supported
[ 4081.998264] kvm_amd: Virtual NMI enabled
[ 4081.998264] kvm_amd: LBR virtualization supported
[ 4082.000354] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
[ 4082.000386] usbcore: registered new interface driver btusb
[ 4082.000576] snd_hda_intel 0000:03:00.1: Force to non-snoop mode
[ 4082.000853] snd_hda_intel 0000:0e:00.6: enabling device (0000 -> 0002)
[ 4082.005056] MCE: In-kernel MCE decoding enabled.
[ 4082.009023] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 4082.010519] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input12
[ 4082.010565] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input13
[ 4082.010611] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input14
[ 4082.010659] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input15
[ 4082.010691] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input16
[ 4082.010722] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input17
[ 4082.032464] snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000
[ 4082.032918] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 4082.032921] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4082.032923] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4082.032925] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[ 4082.032926] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[ 4082.032927] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[ 4082.032928] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[ 4082.032929] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[ 4082.035382] intel_rapl_common: Found RAPL domain package
[ 4082.035384] intel_rapl_common: Found RAPL domain core
[ 4082.047775] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0e:00.6/sound/card1/input18
[ 4082.047816] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0e:00.6/sound/card1/input19
[ 4082.047851] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0e:00.6/sound/card1/input20
[ 4082.047883] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0e:00.6/sound/card1/input21
[ 4082.047918] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0e:00.6/sound/card1/input22
[ 4082.047950] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0e:00.6/sound/card1/input23
[ 4082.047982] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0e:00.6/sound/card1/input24
[ 4082.094847] usbcore: registered new interface driver snd-usb-audio
[ 4082.114333] r8169 0000:0a:00.0 eno1: Link is Down
[ 4082.178795] Bluetooth: hci0: Device setup in 174191 usecs

fstab

# Static information about the filesystems.
# See fstab(5) for details.

# <file system> <dir> <type> <options> <dump> <pass>
# /dev/mapper/cryptlvm
UUID=503751b1-ecab-4052-88a1-1e1a0d9d87d1	/		ext4		rw,realtime												0 1
# /dev/nvme0n1p1
UUID=1F4D-031F 					/boot		vfat		rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro	0 2
# /dev/mapper/ainstnvme0n1p3
UUID=903c6055-6798-4f83-aa42-e2372ed6e297	/home     	ext4      	rw,relatime												0 2
# /.swap
/.swap 						none 		swap 		defaults 												0 0

crypttab

# Configuration for encrypted block devices.
# See crypttab(5) for details.

# NOTE: Do not list your root (/) partition here, it must be set up
#       beforehand by the initramfs (/etc/mkinitcpio.conf).

# <name>       <device>                                     <password>              <options>
# home         UUID=b8ad5c18-f445-495d-9095-c9ec4f9d2f37    /etc/mypassword1
# data1        /dev/sda3                                    /etc/mypassword2
# data2        /dev/sda5                                    /etc/cryptfs.key
# swap         /dev/sdx4                                    /dev/urandom            swap,cipher=aes-cbc-essiv:sha256,size=256
# vol          /dev/sdb7                                    none
ainstnvme0n1p3 UUID=479dd747-081a-477e-b215-a2aaf6f3da66 /etc/cryptsetup-keys.d/homeloop.key luks,key-slot=1,discard

boot options

#Set the internet configuration for remote unlocking
ip=192.168.100.4:::::eth0:none netconf_timeout=10
# Set root device
cryptdevice=UUID=c984b3b1-2f61-4994-ba64-b755a82afd03:cryptlvm:allow-discards rootfstype=ext4 root=/dev/mapper/cryptlvm rw
# enable apparmor
lsm=landlock,lockdown,yama,integrity,apparmor,bpf audit=1 audit_backlog_limit=256

mkinitcpio config

MODULES=()
BINARIES=()
FILES=()
HOOKS=(base udev autodetect modconf kms keyboard keymap consolefont block netconf tinyssh encryptssh filesystems fsck)

edit: I managed to fix it, it was an issue with the mount flags on the root partition. I ended up just using "default".

Last edited by theRedCyclops (2023-10-25 14:20:52)

Arch Linux

#1 2023-10-19 15:39:34

[SOLVED] Systemd-remount-fs service fails after system reinstall

Board footer