Arch Linux

sha256sum

Member

Registered: 2023-10-20

Posts: 2

[SOLVED] Ryzen9 7900X3D sensors iGPU edge: 649°C overly high temp

Hi everyone,

just finished installing on this build:
Ryzen9 7900x3d with Thermalright Frozen 360 AIO
MB Asus B650E-F
Asus Radeon RX 6750 XT OC

graphics with:

xf86-video-amdgpu mesa lib32-mesa mesa-utils vulkan-radeon lib32-vulkan-radeon
amdvlk lib32-amdvlk vulkan-tools vkmark libva-mesa-driver lib32-libva-mesa-driver
libva-utils mesa-vdpau lib32-mesa-vdpau vdpauinfo

Enabled Radeon with AMD_VULKAN_ICD=RADV

Loaded nct6775 module.

sensors shows:

amdgpu-pci-0e00
Adapter: PCI adapter
vddgfx:        1.18 V  
vddnb:         1.01 V  
edge:        +649.0°C  
PPT:          34.04 W  

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +30.1°C  
Tccd1:        +32.6°C  
Tccd2:        +27.9°C  

nvme-pci-0400
Adapter: PCI adapter
Composite:    +31.9°C  (low  =  -0.1°C, high = +84.8°C)
                       (crit = +94.8°C)
Sensor 1:     +31.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +35.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 8:     +31.9°C  (low  = -273.1°C, high = +65261.8°C)

amdgpu-pci-0300
Adapter: PCI adapter
vddgfx:        6.00 mV 
fan1:           0 RPM  (min =    0 RPM, max = 3630 RPM)
edge:         +35.0°C  (crit = +110.0°C, hyst = -273.1°C)
                       (emerg = +115.0°C)
junction:     +37.0°C  (crit = +110.0°C, hyst = -273.1°C)
                       (emerg = +115.0°C)
mem:          +32.0°C  (crit = +105.0°C, hyst = -273.1°C)
                       (emerg = +110.0°C)
PPT:           6.00 W  (cap = 210.00 W)

nct6799-isa-0290
Adapter: ISA adapter
in0:                      824.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                      1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                        3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                        3.31 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                        1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                        1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                      872.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                        3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                        3.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                        3.31 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                       1.12 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                       1.12 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                       1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                     336.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                       2.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                        0 RPM  (min =    0 RPM)
fan2:                      773 RPM  (min =    0 RPM)
fan3:                      686 RPM  (min =    0 RPM)
fan4:                      703 RPM  (min =    0 RPM)
fan5:                        0 RPM  (min =    0 RPM)
fan6:                      728 RPM  (min =    0 RPM)
fan7:                     3426 RPM  (min =    0 RPM)
SYSTIN:                    +25.0°C  (high = +95.0°C, hyst = +48.0°C)  sensor = thermistor
CPUTIN:                    +28.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                   +33.0°C    sensor = thermistor
AUXTIN1:                   +19.0°C    sensor = thermistor
AUXTIN2:                   +19.0°C    sensor = thermistor
AUXTIN3:                   -62.0°C    sensor = thermistor
SMBUSMASTER 0:             +30.0°C  (high = +95.0°C, hyst = +48.0°C)
PECI Agent 0 Calibration:  +28.0°C  
PCH_CHIP_CPU_MAX_TEMP:      +0.0°C  
PCH_CHIP_TEMP:              +0.0°C  
TSI0_TEMP:                 +30.1°C  
intrusion0:               ALARM
intrusion1:               OK
beep_enable:              disabled

Need help with this misbehaviour:
amdgpu-pci-0e00 edge:+649.0°C

Thanks in advance to anyone will help.

Edit 2023-10-26:
Faulty iGPU.Marked as solved.

Last edited by sha256sum (2023-10-26 16:03:30)