You are not logged in.
Pages: 1
So i was searching and trying to fix alot but nothing work i have M10 headphones , I was able to connect it to bluetooth and play audio but when it connect for like 3 second then the audio gone not sound at all i use the "High Fidelity Playback (A2DP Sink,Codec AAC)" and if i change the codec or sink the whole sink just endpoint disconnect no sink at all and only showas off
idk what to do
[CHG] Controller 48:5A:B6:82:A5:CA Discovering: yes
[CHG] Device 41:42:01:3B:98:4D Connected: yes
[CHG] Device 41:42:01:3B:98:4D UUIDs: 0000110b-0000-1000-8000-00805f9b34fb
[CHG] Device 41:42:01:3B:98:4D UUIDs: 0000110c-0000-1000-8000-00805f9b34fb
[CHG] Device 41:42:01:3B:98:4D UUIDs: 0000110d-0000-1000-8000-00805f9b34fb
[CHG] Device 41:42:01:3B:98:4D UUIDs: 0000110e-0000-1000-8000-00805f9b34fb
[CHG] Device 41:42:01:3B:98:4D UUIDs: 0000111e-0000-1000-8000-00805f9b34fb
[CHG] Device 41:42:01:3B:98:4D UUIDs: 00001200-0000-1000-8000-00805f9b34fb
[NEW] Endpoint /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep1
[NEW] Endpoint /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2
[NEW] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/fd2
[CHG] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/fd2 Delay: 0x0bb8 (3000)
[CHG] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/fd2 Volume: 0x007f (127)
[CHG] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/fd2 State: active
[del] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/fd2
[del] Endpoint /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep1
[del] Endpoint /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2here as u see in image in console the sink got deleted and the device is invisibile even thought bluetooth connected and sometimes it says off it happens when i try to change codec or sink idk why if i keep it in AAC codec there is sound for 3 second when connecto bluetooth and then no sound at all
Last edited by unkown (2023-11-23 19:54:26)
Offline
I had this exact issue, and it had nothing to do with codecs nor drivers. Try to disconnect and remove your device in bluetoothctl, then trust the device, then pair and only then to connect. The sequence is of the essence here, so please follow this exact order:
1. disconnect (though it should be disconnected already),
2. remove
3. trust
4. pair
5. connect
Please also make sure your headphones don't get accidentally connected to some other device while you are following the aforementioned steps, like your phone or another laptop (if any).
Offline
I had this exact issue, and it had nothing to do with codecs nor drivers. Try to disconnect and remove your device in bluetoothctl, then trust the device, then pair and only then to connect. The sequence is of the essence here, so please follow this exact order:
1. disconnect (though it should be disconnected already),
2. remove
3. trust
4. pair
5. connectPlease also make sure your headphones don't get accidentally connected to some other device while you are following the aforementioned steps, like your phone or another laptop (if any).
I did exactly as u said and nothing change still the same sound for 5 seconds glitches go and back then gone no sound
[bluetooth]# scan on
Discovery started
[CHG] Controller 48:5A:B6:82:A5:CA Discovering: yes
[CHG] Device 41:42:01:3B:98:4D RSSI: 0xffffffa1 (-95)
[CHG] Device 41:42:01:3B:98:4D RSSI: 0xffffffab (-85)
[CHG] Device 41:42:01:3B:98:4D RSSI: 0xffffff9a (-102)
[CHG] Device 41:42:01:3B:98:4D RSSI: 0xffffffa8 (-88)
[bluetooth]# remove 41:42:01:3B:98:4D
[del] Device 41:42:01:3B:98:4D TWS V5.3
Device has been removed
[NEW] Device 41:42:01:3B:98:4D TWS V5.3
[CHG] Device 41:42:01:3B:98:4D RSSI: 0xffffffa6 (-90)
[CHG] Device 41:42:01:3B:98:4D RSSI: 0xffffffae (-82)
[bluetooth]# trust 41:42:01:3B:98:4D
[CHG] Device 41:42:01:3B:98:4D Trusted: yes
Changing 41:42:01:3B:98:4D trust succeeded
[bluetooth]# pair 41:42:01:3B:98:4D
Attempting to pair with 41:42:01:3B:98:4D
[CHG] Device 41:42:01:3B:98:4D Connected: yes
[CHG] Device 41:42:01:3B:98:4D Bonded: yes
[CHG] Device 41:42:01:3B:98:4D UUIDs: 0000110b-0000-1000-8000-00805f9b34fb
[CHG] Device 41:42:01:3B:98:4D UUIDs: 0000110c-0000-1000-8000-00805f9b34fb
[CHG] Device 41:42:01:3B:98:4D UUIDs: 0000110e-0000-1000-8000-00805f9b34fb
[CHG] Device 41:42:01:3B:98:4D UUIDs: 0000111e-0000-1000-8000-00805f9b34fb
[CHG] Device 41:42:01:3B:98:4D UUIDs: 00001200-0000-1000-8000-00805f9b34fb
[CHG] Device 41:42:01:3B:98:4D ServicesResolved: yes
[CHG] Device 41:42:01:3B:98:4D Paired: yes
Pairing successful
[TWS V5.3]# connect 41:42:01:3B:98:4D
Attempting to connect to 41:42:01:3B:98:4D
[NEW] Endpoint /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep1
[NEW] Endpoint /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2
[NEW] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2/fd0
Connection successful
[CHG] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2/fd0 Volume: 0x007f (127)
[CHG] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2/fd0 State: activethere is also this wierd issue where if i disconnect it from the bluetooth it disconnects but the earphone it self doesnt say disconnected either i can connect any device like mobile like the communication between the laptop and the earphones are cut
I tried using different earphones i11 they dont go no sound but there is alot of glitches sound goes and back
ok redo the steps u mentioned after connection sound goes after this appears
[CHG] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2/fd4 Volume: 0x007f (127)
[CHG] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2/fd4 State: active
[CHG] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2/fd4 Volume: 0x004c (76)Idk if its related or idk
then after it
[del] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2/fd4
[del] Endpoint /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep1
[del] Endpoint /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2Last edited by unkown (2023-11-24 10:53:01)
Offline
Try to pause for about 5 min after you pair the headphones. I want to see if they are not getting paired properly, which causes the disconnect, or it is purely a connection issue.
So, once again, do the following steps:
1. disconnect your headphones from all the devices, then turn them off and turn on
2. remove the device via bluetoothctl
3. trust the device
4. pair the device
5. pause for 5 min and see if your headphones get unpaired
6. if they stay paired for 5 min, check if you headphones are still on (they may turn off while you follow the previous steps). If they are off, turn them on and check if they are still paired by running the "paired-devices" command (your headphones should be in the resultant list of devices)
7. connect the headphones and try them.
If your pairing holds for more than 5 min, but the headphones still work for only a couple minutes after been connected, that may be an issue I haven't faced with. But if you loose pairing (which I believe will be the case), that is purely the issue with connection sequence or the headphones are getting connected with some other device.
Offline
Try to pause for about 5 min after you pair the headphones. I want to see if they are not getting paired properly, which causes the disconnect, or it is purely a connection issue.
So, once again, do the following steps:
1. disconnect your headphones from all the devices, then turn them off and turn on
2. remove the device via bluetoothctl
3. trust the device
4. pair the device
5. pause for 5 min and see if your headphones get unpaired
6. if they stay paired for 5 min, check if you headphones are still on (they may turn off while you follow the previous steps). If they are off, turn them on and check if they are still paired by running the "paired-devices" command (your headphones should be in the resultant list of devices)
7. connect the headphones and try them.If your pairing holds for more than 5 min, but the headphones still work for only a couple minutes after been connected, that may be an issue I haven't faced with. But if you loose pairing (which I believe will be the case), that is purely the issue with connection sequence or the headphones are getting connected with some other device.
Ok so yea paring after 5 mins the headphones turn off Note "pairing without connecting" but since not connecting so ofc gonna turn off so i did try second to connect and keep it for 5 mins and it kept turned on for like 10 mins until i turn it off to check if still on and yea it was still connected normally so just the trasnport the sending and recieving is the problem
Conclution
pairing turn off
Connecting keep connected and not turnoff but no sound ( i kept it like 10 mins to 15 while playing a game).
i just entered audio settings and tried test on the headphones which have a right and left test in kde plasma after that the sink got deleted as when i change codec
[del] Transport /org/bluez/hci0/dev_41_42_01_3B_98_4D/fd2
[del] Endpoint /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep1
[del] Endpoint /org/bluez/hci0/dev_41_42_01_3B_98_4D/sep2
[TWS V5.3]#But it keeps the headphones connected its not disconnecting at all
Last edited by unkown (2023-11-24 19:42:27)
Offline
Here I'm less certain, but I would assume that this one goes down to incorrect drivers. However, I have not seen such an issue myself when a well-paired and connected headphones get muted along the way without losing connection.
Maybe some other forum members may be of more help.
Last edited by Stonegrip (2023-11-26 03:10:20)
Offline
Here I'm less certain, but I would assume that this one goes down to incorrect drivers. However, I have not seen such an issue myself when a well-paired and connected headphones get muted along the way without losing connection.
Maybe some other forum members may be of more help.
Ok but i mean the other headphones i11 didnt mute but keeps glitching sounds on off ok nvm for this problem i have another and it may have a chance to fix it too sending from pc and mobile and vise versa not working it doesnt connect between the mobile and pc the mobile can pair retrieve and accept recieving but it fails to recieve them how do i fix it
Offline
Pages: 1