Arch Linux

utilisima.online

Member

Registered: 2023-12-11

Posts: 7

the software was damaged after the update

I performed an update with sudo pacman -Syu After that, I turned off the computer normally. When I turned on the computer later, the desktop was black and only the taskbar appeared. The desktop is Xfce. I had a 5g wifi antenna and it stopped connecting to the internet. I had to connect a cable and it works. I tried to do another update but it says that everything is up to date. I turned it off and it wouldn't turn off, it just stayed on. in addition the PC is pausing and that did not happen before.

These were the packages that were updated

[2023-12-10T08:37:55-0500] [ALPM] upgraded aom (3.7.1-1 -> 3.8.0-2)
[2023-12-10T08:37:55-0500] [ALPM] upgraded systemd-libs (254.6-2 -> 255-1)
[2023-12-10T08:37:55-0500] [ALPM] upgraded curl (8.4.0-2 -> 8.5.0-1)
[2023-12-10T08:37:55-0500] [ALPM] upgraded glib2 (2.78.1-1 -> 2.78.3-1)
[2023-12-10T08:37:55-0500] [ALPM] upgraded archlinux-keyring (20231130-1 -> 20231207-1)
[2023-12-10T08:38:02-0500] [ALPM] upgraded bluez-libs (5.70-1 -> 5.70-2)
[2023-12-10T08:38:02-0500] [ALPM] upgraded hwdata (0.376-1 -> 0.377-1)
[2023-12-10T08:38:03-0500] [ALPM] upgraded systemd (254.6-2 -> 255-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded code (1.84.2-1 -> 1.85.0-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded frei0r-plugins (2.3.1-1 -> 2.3.2-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded ksanecore (23.08.3-1 -> 23.08.4-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded libksane (23.08.3-1 -> 23.08.4-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded thin-provisioning-tools (1.0.7-1 -> 1.0.8-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded kolourpaint (23.08.3-1 -> 23.08.4-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded lib32-curl (8.4.0-2 -> 8.5.0-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded lib32-glib2 (2.78.1-1 -> 2.78.3-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded lib32-systemd (254.6-1 -> 255-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded libdecor (0.2.1-1 -> 0.2.1-2)
[2023-12-10T08:38:17-0500] [ALPM] upgraded linux (6.6.4.arch1-1 -> 6.6.5.arch1-1)
[2023-12-10T08:38:21-0500] [ALPM] upgraded linux-headers (6.6.4.arch1-1 -> 6.6.5.arch1-1)
[2023-12-10T08:38:21-0500] [ALPM] upgraded npm (10.2.4-1 -> 10.2.5-1)
[2023-12-10T08:38:21-0500] [ALPM] upgraded python-typing_extensions (4.8.0-1 -> 4.9.0-1)
[2023-12-10T08:38:21-0500] [ALPM] upgraded python-setuptools (1:68.2.1-1 -> 1:69.0.0-1)
[2023-12-10T08:38:21-0500] [ALPM] upgraded systemd-sysvcompat (254.6-2 -> 255-1)
[2023-12-10T13:15:41-0500] [ALPM] upgraded lib32-libnl (3.8.0-1 -> 3.9.0-1)

I was able to recover the desktop with

command | xfdesktop &

I was able to turn it off with

command | systemctl poweroff

history

[2023-12-10T08:36:50-0500] [PACMAN] Running 'pacman -Syu'
[2023-12-10T08:36:50-0500] [PACMAN] synchronizing package lists
[2023-12-10T08:36:54-0500] [PACMAN] starting full system upgrade
[2023-12-10T08:37:45-0500] [ALPM] running '60-mkinitcpio-remove.hook'...
[2023-12-10T08:37:45-0500] [ALPM] running '71-dkms-remove.hook'...
[2023-12-10T08:37:46-0500] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod rtl88x2bu/5.13.1.r189.12cfcd8 -k 6.6.4-arch1-1
[2023-12-10T08:37:46-0500] [ALPM-SCRIPTLET] ==> depmod 6.6.4-arch1-1
[2023-12-10T08:37:55-0500] [ALPM] transaction started
[2023-12-10T08:37:55-0500] [ALPM] upgraded aom (3.7.1-1 -> 3.8.0-2)
[2023-12-10T08:37:55-0500] [ALPM] upgraded systemd-libs (254.6-2 -> 255-1)
[2023-12-10T08:37:55-0500] [ALPM] upgraded curl (8.4.0-2 -> 8.5.0-1)
[2023-12-10T08:37:55-0500] [ALPM] upgraded glib2 (2.78.1-1 -> 2.78.3-1)
[2023-12-10T08:37:55-0500] [ALPM] upgraded archlinux-keyring (20231130-1 -> 20231207-1)
[2023-12-10T08:37:55-0500] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
[2023-12-10T08:38:01-0500] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
[2023-12-10T08:38:01-0500] [ALPM-SCRIPTLET]   -> Disabled 3 keys.
[2023-12-10T08:38:01-0500] [ALPM-SCRIPTLET] ==> Updating trust database...
[2023-12-10T08:38:02-0500] [ALPM-SCRIPTLET] gpg: marginals needed: 3  completes needed: 1  trust model: pgp
[2023-12-10T08:38:02-0500] [ALPM-SCRIPTLET] gpg: depth: 0  valid:   1  signed:   5  trust: 0-, 0q, 0n, 0m, 0f, 1u
[2023-12-10T08:38:02-0500] [ALPM-SCRIPTLET] gpg: depth: 1  valid:   5  signed:  97  trust: 0-, 0q, 0n, 5m, 0f, 0u
[2023-12-10T08:38:02-0500] [ALPM-SCRIPTLET] gpg: depth: 2  valid:  72  signed:  28  trust: 72-, 0q, 0n, 0m, 0f, 0u
[2023-12-10T08:38:02-0500] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2024-01-21
[2023-12-10T08:38:02-0500] [ALPM] upgraded bluez-libs (5.70-1 -> 5.70-2)
[2023-12-10T08:38:02-0500] [ALPM] upgraded hwdata (0.376-1 -> 0.377-1)
[2023-12-10T08:38:03-0500] [ALPM] upgraded systemd (254.6-2 -> 255-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded code (1.84.2-1 -> 1.85.0-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded frei0r-plugins (2.3.1-1 -> 2.3.2-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded ksanecore (23.08.3-1 -> 23.08.4-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded libksane (23.08.3-1 -> 23.08.4-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded thin-provisioning-tools (1.0.7-1 -> 1.0.8-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded kolourpaint (23.08.3-1 -> 23.08.4-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded lib32-curl (8.4.0-2 -> 8.5.0-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded lib32-glib2 (2.78.1-1 -> 2.78.3-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded lib32-systemd (254.6-1 -> 255-1)
[2023-12-10T08:38:05-0500] [ALPM] upgraded libdecor (0.2.1-1 -> 0.2.1-2)
[2023-12-10T08:38:17-0500] [ALPM] upgraded linux (6.6.4.arch1-1 -> 6.6.5.arch1-1)
[2023-12-10T08:38:21-0500] [ALPM] upgraded linux-headers (6.6.4.arch1-1 -> 6.6.5.arch1-1)
[2023-12-10T08:38:21-0500] [ALPM] upgraded npm (10.2.4-1 -> 10.2.5-1)
[2023-12-10T08:38:21-0500] [ALPM] upgraded python-typing_extensions (4.8.0-1 -> 4.9.0-1)
[2023-12-10T08:38:21-0500] [ALPM] upgraded python-setuptools (1:68.2.1-1 -> 1:69.0.0-1)
[2023-12-10T08:38:21-0500] [ALPM] upgraded systemd-sysvcompat (254.6-2 -> 255-1)
[2023-12-10T08:38:22-0500] [ALPM] transaction completed
[2023-12-10T08:38:23-0500] [ALPM] running '20-systemd-sysusers.hook'...
[2023-12-10T08:38:23-0500] [ALPM] running '30-systemd-catalog.hook'...
[2023-12-10T08:38:23-0500] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2023-12-10T08:38:23-0500] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2023-12-10T08:38:23-0500] [ALPM] running '30-systemd-hwdb.hook'...
[2023-12-10T08:38:24-0500] [ALPM] running '30-systemd-sysctl.hook'...
[2023-12-10T08:38:24-0500] [ALPM] running '30-systemd-tmpfiles.hook'...
[2023-12-10T08:38:24-0500] [ALPM] running '30-systemd-udev-reload.hook'...
[2023-12-10T08:38:26-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-10T08:38:26-0500] [ALPM] running '60-depmod.hook'...
[2023-12-10T08:38:28-0500] [ALPM] running '70-dkms-install.hook'...
[2023-12-10T08:38:28-0500] [ALPM-SCRIPTLET] ==> dkms install --no-depmod rtl88x2bu/5.13.1.r189.12cfcd8 -k 6.6.5-arch1-1
[2023-12-10T08:41:10-0500] [ALPM-SCRIPTLET] ==> depmod 6.6.5-arch1-1
[2023-12-10T08:41:13-0500] [ALPM] running '90-mkinitcpio-install.hook'...
[2023-12-10T08:41:13-0500] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2023-12-10T08:41:13-0500] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2023-12-10T08:41:13-0500] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -g /boot/initramfs-linux.img --microcode /boot/amd-ucode.img
[2023-12-10T08:41:13-0500] [ALPM-SCRIPTLET] ==> Starting build: '6.6.5-arch1-1'
[2023-12-10T08:41:13-0500] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2023-12-10T08:41:13-0500] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2023-12-10T08:41:14-0500] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2023-12-10T08:41:14-0500] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2023-12-10T08:41:14-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2023-12-10T08:41:14-0500] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2023-12-10T08:41:14-0500] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2023-12-10T08:41:14-0500] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2023-12-10T08:41:15-0500] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2023-12-10T08:41:15-0500] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2023-12-10T08:41:24-0500] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2023-12-10T08:41:24-0500] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
[2023-12-10T08:41:25-0500] [ALPM-SCRIPTLET] ==> Image generation successful
[2023-12-10T08:41:25-0500] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2023-12-10T08:41:25-0500] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2023-12-10T08:41:25-0500] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -g /boot/initramfs-linux-fallback.img -S autodetect --microcode /boot/amd-ucode.img
[2023-12-10T08:41:25-0500] [ALPM-SCRIPTLET] ==> Starting build: '6.6.5-arch1-1'
[2023-12-10T08:41:25-0500] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2023-12-10T08:41:25-0500] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2023-12-10T08:41:26-0500] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2023-12-10T08:41:26-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2023-12-10T08:41:27-0500] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2023-12-10T08:41:27-0500] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2023-12-10T08:41:27-0500] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2023-12-10T08:41:28-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2023-12-10T08:41:28-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2023-12-10T08:41:28-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2023-12-10T08:41:28-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2023-12-10T08:41:28-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2023-12-10T08:41:29-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2023-12-10T08:41:31-0500] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2023-12-10T08:41:33-0500] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2023-12-10T08:41:43-0500] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2023-12-10T08:41:43-0500] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
[2023-12-10T08:41:46-0500] [ALPM-SCRIPTLET] ==> Image generation successful
[2023-12-10T08:41:46-0500] [ALPM] running 'dbus-reload.hook'...
[2023-12-10T08:41:46-0500] [ALPM] running 'gtk-update-icon-cache.hook'...
[2023-12-10T08:41:46-0500] [ALPM] running 'update-desktop-database.hook'...

These warnings always came up in updates but there was no problem

[2023-12-10T08:41:26-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci'
[2023-12-10T08:41:28-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2023-12-10T08:41:28-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2023-12-10T08:41:28-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2023-12-10T08:41:28-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2023-12-10T08:41:28-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2023-12-10T08:41:29-0500] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'

Last edited by utilisima.online (2023-12-11 13:58:16)

seth

Member

Registered: 2012-09-03

Posts: 51,504

Re: the software was damaged after the update

Please use [code][/code] tags. Edit your post in this regard.

I performed an update from 8 to 9

What's that supposed to be? Or do you mean "o'clock"? Nobody cares.

the desktop was black and only the taskbar appeared.
…
I had a 5g wifi antenna and it stopped connecting to the internet. I had to connect a cable and it works.

uname -a
pacman -Qs kernel

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

utilisima.online

Member

Registered: 2023-12-11

Posts: 7

Re: the software was damaged after the update

$ pacman -Qs kernel

local/dkms 3.0.11-1
    Dynamic Kernel Modules System
local/fuse3 3.16.2-1
    Interface for userspace programs to export a filesystem to the Linux
    kernel
local/iptables 1:1.8.10-1
    Linux kernel packet control tool (using legacy interface)
local/kmod 31-1
    Linux kernel module management tools and library
local/lib32-libdrm 2.4.117-1
    Userspace interface to kernel DRM services (32-bit)
local/libdrm 2.4.118-1
    Userspace interface to kernel DRM services
local/libnetfilter_conntrack 1.0.9-1
    Library providing an API to the in-kernel connection tracking state
    table
local/libnfnetlink 1.0.2-1
    Low-level library for netfilter related kernel/userspace
    communication
local/libsysprof-capture 45.1-1
    Kernel based performance profiler - capture library
local/linux 6.6.5.arch1-1
    The Linux kernel and modules
local/linux-api-headers 6.4-1
    Kernel headers sanitized for use in userspace
local/linux-headers 6.6.5.arch1-1
    Headers and scripts for building modules for the Linux kernel
local/mtdev 1.1.6-2
    A stand-alone library which transforms all variants of kernel MT
    events to the slotted type B protocol

$ uname -a

Linux linux 6.6.5-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 08 Dec 2023 17:06:25 +0000 x86_64 GNU/Linux

Last edited by utilisima.online (2023-12-11 13:59:54)

WorMzy

Forum Moderator

From: Scotland

Registered: 2010-06-16

Posts: 11,885

Website

Re: the software was damaged after the update

Don't mistake seth's request for you to use code tags as optional.

https://wiki.archlinux.org/title/Genera … s_and_code

Please fix your posts.

---

Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD

Making lemonade from lemons since 2015.

seth

Member

Registered: 2012-09-03

Posts: 51,504

Re: the software was damaged after the update

So you're running the updated kernel, that's not it.

Please post your complete system journal for the boot:

sudo journalctl -b | curl -F 'file=@-' 0x0.st

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

utilisima.online

Member

Registered: 2023-12-11

Posts: 7

Re: the software was damaged after the update

I'm having an issue with a command I'm trying to execute. I'm running the command multiple times, but I'm only getting a single line of output containing a URL.

$ sudo journalctl -b | curl -F 'file=@-' 0x0.st
http://0x0.st/H3w3.txt 

loqs

Member

Registered: 2014-03-06

Posts: 17,414

Re: the software was damaged after the update

The command pipes the journal for the current boot to a pastebin which returns the URL of the page hosting the file you uploaded.  So the one line output is expected.

seth

Member

Registered: 2012-09-03

Posts: 51,504

Re: the software was damaged after the update

You've NM and systemd-networkd enabled, pick one, disable the other.

Other than that, there's no glaring problem - can you find the 5GHz AP with other devices?
You're connecting to a 2.4GHz AP w/o issues and get a lease and global connection.

Does xfce show up in corehttps://wiki.archlinux.org/title/Core_dump#Examining_a_core_dump ?

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

utilisima.online

Member

Registered: 2023-12-11

Posts: 7

Re: the software was damaged after the update

I disabled systemd-networkd and reinstalled NetworkManager.

sudo systemctl stop systemd-networkd
sudo systemctl disable systemd-networkd
sudo pacman -S networkmanager
sudo systemctl enable NetworkManager
sudo systemctl start NetworkManager
sudo systemctl stop systemd-resolved
sudo systemctl disable systemd-resolved

With that, I was able to connect to the 5G Wi-Fi again. I think that's why the PC paused; so far, I haven't experienced any more Pc paused.
However, I have a question because I want to learn: How did you know that I had two networking services enabled?

On the other hand, the desktop was restored with:

xfdesktop &
nohup xfdesktop

I also performed a system update, and Linux was updated from linux 6.6.5-arch1-1 to Linux 6.6.6-arch1-1. The PC has turned off without problems for now.

Regarding core dumps, I don't think I have core dump files enabled because it requires the gdb 13.2-1 library. I searched for it with yay, and it's not even installed

thank you very much for everything especially seth for the wifi

Last edited by utilisima.online (2023-12-12 04:04:59)

seth

Member

Registered: 2012-09-03

Posts: 51,504

Re: the software was damaged after the update

How did you know that I had two networking services enabled?

They show up in your journal.

xfdesktop &
nohup xfdesktop

what do you think that does and where do you put that?

dump files enabled because it requires the gdb 13.2-1 library

No, you need sth. like gdb to inspect them, but coredumps are images of the process memory.

sudo coredumpctl list

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

utilisima.online

Member

Registered: 2023-12-11

Posts: 7

Re: the software was damaged after the update

Hi

I entered the following command in the terminal, and the desktop icons appeared.

xfdesktop 

However, when I closed the terminal, the icons disappeared. To address this issue, I executed the following command in the terminal:

nohup xfdesktop

This command creates a file in the /home/user/ directory named nohup.out. Once this file appears, Now I can close the terminal, and the icons remain on the desktop

about the command

sudo coredumpctl list

I am getting the next result

TIME                         COREFILE EXE                          SIZE
Mon 2023-12-11 23:01:33 -05  /usr/lib/electron25/electron        8.0M
Tue 2023-12-12 08:36:08 -05   /usr/bin/xfdesktop                5.8M

seth

Member

Registered: 2012-09-03

Posts: 51,504

Re: the software was damaged after the update

However, when I closed the terminal, the icons disappeared.

Ok, that's normal. Try eg.

xfdesktop <&- > /dev/null & disown

Tue 2023-12-12 08:36:08 -05   /usr/bin/xfdesktop                5.8M

That looks interesting enough, can you show the backtrace?

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

utilisima.online

Member

Registered: 2023-12-11

Posts: 7

Re: the software was damaged after the update

The desktop icons now are working fine, but during the login screen, the background has changed from green to black. This wasn't the case before.

About the "backtrace." If you're referring to the command history

the command history before is:

150  yay -Syu
  151  yay -Ss openshot
  152  yay -S openshot 3.1.1-1
  153  systemctl --user restart pulseaudio.service
  154  sensors
  155  yay -Ss shotcut
  156  yay -S shotcut 23.11.29-1
  157  yay -Ss vokoscreen
  158  yay -S vokoscreen 3.7.0-1
  159  systemctl --user restart pulseaudio.service
  160  systemctl --user restart pulseaudio.service
  161  sensors
  162  npm run start
  163  systemctl --user restart pulseaudio.service
  164  pamac install freeplane
  165  pacman install freeplane
  166  yay -Ss freeplane
  167  yay -S freeplane 1.11.8-1
  168  freeplane
  169  pamac install minder
  170  yay -Ss minder
  171  yay -S minder 1.15.6-2
  172  yay -r freeplane 1.11.8-1
  173  yay -r freeplane
  174  yay -R freeplane
  175  npm run start
  176  pwd
  177  pwd
  178  systemctl --user restart pulseaudio.service
  179  systemctl --user restart pulseaudio.service
  180  systemctl --user restart pulseaudio.service
  181  pwd
  182  sudo pacman -Syu
  183  sensors
  184  npm run start
  185  pwd
  186  pwd
  187  npm run start
  188  source path/to/venv/bin/activate
  189  cd textoavoz
  190  python textoavoz.py
  191  pwd
  192  pwd
  193  pwd
  194  pwd
  195  pwd
  196  systemctl --user restart pulseaudio.service
  197  systemctl --user restart pulseaudio.service
  198  pwd
  199  touch appCuentasJava.php
  200  sudo touch appCuentasJava.php
  201  source path/to/venv/bin/activate
  202  cd textoavoz
  203  python textoavoz.py
  204  npm run start
  205  pwd
  206  systemctl --user restart pulseaudio.service
  207  sudo pacman -Syu
  208  pwd
  209  pwd
  210  sudo npm run start
  211  clear
  212  ls
  213  pwd
  214  pwd


  215  sudo pacman -Syu
  216  journalctl -xe
  217  df -h
  218  sudo pacman -Syu --needed
  219  sudo pacman -Qkk
  220  journalctl -b
  221  history
  222  sudo systemctl restart NetworkManager
  223  sudo pacman -S mesa
  224  glxinfo | grep "OpenGL version"
  225  vulkaninfo
  226  lspci -k | grep -A 3 -E "(VGA|3D)"
  227  sudo mkinitcpio -P
  228  journalctl -b -1
  229  sudo systemctl restart wpa_supplicant
  230  sudo systemctl status wpa_supplicant
  231  sudo systemctl enable wpa_supplicant
  232  sudo systemctl status wpa_supplicant
  233  sudo systemctl status wpa_supplicant
  234  sudo systemctl restart wpa_supplicant
  235  sudo pacman -Syu wpa_supplicant
  236  sudo pacman -Syu wpa_supplicant
  237  sudo pacman -Syu
  238  systemctl --user restart at-spi-dbus-bus.service
  239  systemctl --user status at-spi-dbus-bus.service
  240  systemctl --user status gvfs-daemon.service
  241  systemctl --user restart gvfs-daemon.service
  242  systemctl restart xorg.service
  243  systemctl list-units --type=service
  244  sudo pacman -Syu
  245  sudo pacman -Syu
  246  pacman -Q --upgrades
  247  cat /var/log/pacman.log
  248  cat /var/log/pacman.log | grep upgraded
  249  cat /var/log/pacman.log | grep running
  250  grep '2023-12-10T08:' /var/log/pacman.log
  251  grep '2023-12-10T09:' /var/log/pacman.log
  252  grep '2023-12-10T10:' /var/log/pacman.log
  253  history
  254  xfdesktop & 

In the command 215 , I was trying to fix problems with the internet and missing desktop icons.

Perhaps the back history leading up to that command will shed some light on what happen.

In previous days openshot stopped working and I installed it again

seth

Member

Registered: 2012-09-03

Posts: 51,504

Re: the software was damaged after the update

If you're referring to the command history

No, the backtrace of the crashing process.
https://wiki.archlinux.org/title/Core_d … _core_dump

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc