You are not logged in.
- Topics: Active | Unanswered
#1 2023-12-28 06:05:43
- eyuman212
- Member
- Registered: 2023-12-28
- Posts: 4
Arch LINUX RANDOMLY FREEZES,SCREEN GLITCHES AND KERNAL PANIC RANDOMLY
iPC SPECS
HP 14s-dq2360nia
RAM 8
CPU: i7-1165G7
GPU: Intel TigerLake-LP GT2 [Iris Xe Graph]
SSD: WD PC SN740
HDD: Not present
I bought a new pc which came with Windows 11 pre-installed. I dual booted it with Arch Linux. Up to 3 weeks things were fine. Then I decided I want to go full arch.After few days I start working on power management and I read about ACPI on Arck Wiki then I installed it. Since then my PC has been struggling with these 'Crashes'
Demo of the giltch
I quickly uninstalled ACPI but the crashes were presistant. I though it was the Xorg or graphics card problem, I installed every driver possible [for intel Iris]
tried dubbing Xorg but nothing changed.
These Crashes happens in two ways. One is as you saw, Screen goes flickering while the other freezes while the Keyboard and mouse doesn't respond and caps lock flash on and off and kernal panics.Both happen very randomly but the screen flickers once then the system stops responding.
Journal CTL doesn't report anything expect for the kernal panics but here are something journalctl identify as error.
Nov 03 12:56:59 matrix kernel: nvme 10000:e1:00.0: [ 0] RxErr (First)
Nov 03 12:56:59 matrix kernel: nvme 10000:e1:00.0: device [15b7:5017] error status/mask=00000001/0000e000
Nov 03 12:56:59 matrix kernel: nvme 10000:e1:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
Nov 03 12:56:59 matrix kernel: pcieport 10000:e0:1d.0: [ 0] RxErr (First)
Nov 03 12:56:59 matrix kernel: pcieport 10000:e0:1d.0: device [8086:a0b0] error status/mask=00000001/00002000
Nov 03 12:56:59 matrix kernel: pcieport 10000:e0:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)[These was the last Error logged on journalctl when Xorg crashes and Mouse and Keyboard were lockout]
Nov 03 12:58:29 matrix kernel: ACPI: 11 ACPI AML tables successfully acquired and loaded
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Added _OSI(Processor Aggregator Device)
Nov 03 12:58:29 matrix kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Nov 03 12:58:29 matrix kernel: ACPI: Added _OSI(Processor Device)
Nov 03 12:58:29 matrix kernel: ACPI: Added _OSI(Module Device)
Nov 03 12:58:29 matrix kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
Nov 03 12:58:29 matrix kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
Nov 03 12:58:29 matrix kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
Nov 03 12:58:29 matrix kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
Nov 03 12:58:29 matrix kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
Nov 03 12:58:29 matrix kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Nov 03 12:58:29 matrix kernel: PCI: Using configuration type 1 for base access
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Skipping parse of AML opcode: Method (0x0014)
Nov 03 12:58:29 matrix kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
Nov 03 12:58:29 matrix kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
Nov 03 12:58:29 matrix kernel: ACPI: Added _OSI(Processor Aggregator Device)
Nov 03 12:58:29 matrix kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Nov 03 12:58:29 matrix kernel: ACPI: Added _OSI(Processor Device)
Nov 03 12:58:29 matrix kernel: ACPI: Added _OSI(Module Device)[Journal CTL always report these on boot]
This Crashes also happened on other distros like Kali
But kali report faulty power saving mode and to disable power saving mode for nvme.
Images of the Crash report
Kali also reported
I added nvme.default_latency_us=0 and pcim=off to the kernal parameter yet nothing change. Infact the crashes start to happen often.
So My only option is to go back to the state where the PC where before the crashes start to appear. So I dual booted Arch With Windows Again.[Remove Kali]
My Storage Device wasn't appearing so I installed some driver and Installed Windows with generic driver.
I installed intel Optane Memory Managment but still crash happens.
The crashes seem to minimze but what is odd is it started to happen on Windows, Windows freeze for several minute or Windows goes black screen and freeze not come back until forced shutdown.
I thought It was the SSD until the crash happened on a live boot USD.[twice]
Right now, I really don't have any idea what to do, this issue had been over a month now. I even have to rewrite all my question after a crash happen and corputed my text file
Please ask me any info
smartctl /dev/nvme0 -a
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.1.62-1-lts] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]
=== START OF INFORMATION SECTION ===
Model Number: WD PC SN740 SDDPNQD-512G-1006
Serial Number: 23042D802325
Firmware Version: HPS3
PCI Vendor/Subsystem ID: 0x15b7
IEEE OUI Identifier: 0x001b44
Total NVM Capacity: 512,110,190,592 [512 GB]
Unallocated NVM Capacity: 0
Controller ID: 0
NVMe Version: 1.4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 512,110,190,592 [512 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 001b44 8b4e0a619c
Local Time is: Sat Dec 2 20:15:08 2023 EAT
Firmware Updates (0x14): 2 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x00df): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Verify
Log Page Attributes (0x7e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Log0_FISE_MI Telmtry_Ar_4
Maximum Data Transfer Size: 256 Pages
Warning Comp. Temp. Threshold: 84 Celsius
Critical Comp. Temp. Threshold: 88 Celsius
Namespace 1 Features (0x02): NA_Fields
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 4.70W 4.30W - 0 0 0 0 0 0
1 + 3.00W 3.00W - 0 0 0 0 0 0
2 + 2.20W 2.00W - 0 0 0 0 0 0
3 - 0.0150W - - 3 3 3 3 1500 2500
4 - 0.0050W - - 4 4 4 4 10000 6000
5 - 0.0033W - - 5 5 5 5 176000 25000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 2
1 - 4096 0 1
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 48 Celsius
Available Spare: 100%
Available Spare Threshold: 5%
Percentage Used: 0%
Data Units Read: 10,327,029 [5.28 TB]
Data Units Written: 6,562,423 [3.35 TB]
Host Read Commands: 92,836,771
Host Write Commands: 59,493,443
Controller Busy Time: 159
Power Cycles: 957
Power On Hours: 549
Unsafe Shutdowns: 511
Media and Data Integrity Errors: 0
Error Information Log Entries: 21
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 69 Celsius
Temperature Sensor 2: 44 Celsius
Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged
Self-test Log (NVMe Log 0x06)
Self-test status: No self-test in progress
Num Test_Description Status Power_on_Hours Failing_LBA NSID Seg SCT Code
0 Short Completed without error 457 - - - - -
1 Short Completed without error 438 - - - - -
2 Short Aborted: Controller Reset 438 - - - - -
3 Short Completed without error 9 - - - - -lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
nvme0n1 259:0 0 476.9G 0 disk
├─nvme0n1p1 259:1 0 100M 0 part
├─nvme0n1p2 259:2 0 16M 0 part
├─nvme0n1p3 259:3 0 74.1G 0 part
│ └─luks-5c122df3-2d15-4d5a-bbef-2aea284543b1 254:0 0 74.1G 0 crypt /home/Rick/Local D
├─nvme0n1p4 259:4 0 77G 0 part
├─nvme0n1p5 259:5 0 682M 0 part
├─nvme0n1p6 259:6 0 8.8G 0 part [SWAP]
├─nvme0n1p7 259:7 0 195.3G 0 part /
├─nvme0n1p8 259:8 0 400M 0 part /boot/efi
└─nvme0n1p9 259:9 0 72.2G 0 part lspci -nn
0000:00:00.0 Host bridge [0600]: Intel Corporation 11th Gen Core Processor Host Bridge/DRAM Registers [8086:9a14] (rev 01)
0000:00:02.0 VGA compatible controller [0300]: Intel Corporation TigerLake-LP GT2 [Iris Xe Graphics] [8086:9a49] (rev 01)
0000:00:04.0 Signal processing controller [1180]: Intel Corporation TigerLake-LP Dynamic Tuning Processor Participant [8086:9a03] (rev 01)
0000:00:08.0 System peripheral [0880]: Intel Corporation GNA Scoring Accelerator module [8086:9a11] (rev 01)
0000:00:0e.0 RAID bus controller [0104]: Intel Corporation Volume Management Device NVMe RAID Controller [8086:9a0b]
0000:00:14.0 USB controller [0c03]: Intel Corporation Tiger Lake-LP USB 3.2 Gen 2x1 xHCI Host Controller [8086:a0ed] (rev 20)
0000:00:14.2 RAM memory [0500]: Intel Corporation Tiger Lake-LP Shared SRAM [8086:a0ef] (rev 20)
0000:00:15.0 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP Serial IO I2C Controller #0 [8086:a0e8] (rev 20)
0000:00:15.1 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP Serial IO I2C Controller #1 [8086:a0e9] (rev 20)
0000:00:16.0 Communication controller [0780]: Intel Corporation Tiger Lake-LP Management Engine Interface [8086:a0e0] (rev 20)
0000:00:1c.0 PCI bridge [0604]: Intel Corporation Tiger Lake-LP PCI Express Root Port #8 [8086:a0bf] (rev 20)
0000:00:1d.0 System peripheral [0880]: Intel Corporation RST VMD Managed Controller [8086:09ab]
0000:00:1f.0 ISA bridge [0601]: Intel Corporation Tiger Lake-LP LPC Controller [8086:a082] (rev 20)
0000:00:1f.3 Multimedia audio controller [0401]: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller [8086:a0c8] (rev 20)
0000:00:1f.4 SMBus [0c05]: Intel Corporation Tiger Lake-LP SMBus Controller [8086:a0a3] (rev 20)
0000:00:1f.5 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP SPI Controller [8086:a0a4] (rev 20)
0000:01:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8822CE 802.11ac PCIe Wireless Network Adapter [10ec:c822]
10000:e0:1d.0 PCI bridge [0604]: Intel Corporation Tiger Lake-LP PCI Express Root Port #9 [8086:a0b0] (rev 20)
10000:e1:00.0 Non-Volatile memory controller [0108]: Sandisk Corp WD Black SN770 / PC SN740 256GB / PC SN560 (DRAM-less) NVMe SSD [15b7:5017] (rev 01)Things you might know
These crashes happen even when I didn't start Xorg [startx]
These crashes mostly happens when I am on terminal application.[either kitty or alacritty]
These crashes often happen when I play music from MOC.
These crashes often after system hibernated or system had been suspended.
After these crashes happen some system file such as .zsh_history will be erased.
Sometimes these crashs specifically happen either when I am on battery or AC.
I have removed all My Power Managment Apps including auto-freq and powertop
One Odd thing happened is these crashes stopped happening for some weeks and started reappearing without making any changes
To add more info about me, I had used Arch linux over 3 year but have not encourted this kind of issuess. Infact I never had seen this kind of issuess.
NB: All of system compontents including ram has passed their check.
Bouns: I setted up a fresh Gentoo setup last 2 weeks and still happened. But I first exprienced this error on Arch while playing with ACPI
Last edited by eyuman212 (2023-12-28 06:13:37)
Offline
#2 2023-12-28 11:02:45
- Head_on_a_Stick
- Member
- From: London
- Registered: 2014-02-20
- Posts: 7,732
- Website
Re: Arch LINUX RANDOMLY FREEZES,SCREEN GLITCHES AND KERNAL PANIC RANDOMLY
Check you RAM health.
EDIT: and please don't shout in the thread title. That's a bit rude.
Last edited by Head_on_a_Stick (2023-12-28 11:03:18)
Offline
#3 2023-12-28 21:39:03
- eyuman212
- Member
- Registered: 2023-12-28
- Posts: 4
Re: Arch LINUX RANDOMLY FREEZES,SCREEN GLITCHES AND KERNAL PANIC RANDOMLY
Head_on_a_Stick wrote:
Check you RAM health.
EDIT: and please don't shout in the thread title. That's a bit rude.
Thank for repling and 
sorry for the title. I checked my health Ram mutilple times through HP's own system board tester.
Do you think it can go undetected there?
Offline
#4 2023-12-29 11:36:32
- Head_on_a_Stick
- Member
- From: London
- Registered: 2014-02-20
- Posts: 7,732
- Website
Re: Arch LINUX RANDOMLY FREEZES,SCREEN GLITCHES AND KERNAL PANIC RANDOMLY
Seems unlikely but it won't hurt to run the memtest thingie from the Arch live ISO boot menu.
Offline
#5 2023-12-29 12:56:43
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,655
Re: Arch LINUX RANDOMLY FREEZES,SCREEN GLITCHES AND KERNAL PANIC RANDOMLY
Also nb. that meaningful memtest86+ tests are measured in days.
Please dont't post (out of focus…) images of random things, start w/ a complete system journal (before any crash)
sudo journalctl -b | curl -F 'file=@-' 0x0.stand your Xorg log, https://wiki.archlinux.org/title/Xorg#General
When the system crashes, see whether you can reboot using the https://wiki.archlinux.org/title/Keyboa … el_(SysRq)
And also try the LTS kernel.
Lastly, don't be sorry - edit your inital post and fix the subject.
Offline
#6 2023-12-31 09:34:16
- eyuman212
- Member
- Registered: 2023-12-28
- Posts: 4
Re: Arch LINUX RANDOMLY FREEZES,SCREEN GLITCHES AND KERNAL PANIC RANDOMLY
Thank you for the reply,
http://0x0.st/HEkG.txt,
Here is the Xorg log
[ 24.526]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 24.527] Current Operating System: Linux matrix 6.1.62-1-lts #1 SMP PREEMPT_DYNAMIC Thu, 09 Nov 2023 17:21:17 +0000 x86_64
[ 24.527] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=93ea1e0b-fedd-4d58-aaf6-5e53c63dd836 rw loglevel=5 resume=UUID=9586ce21-9c04-44fb-a495-d1881200c703
[ 24.527]
[ 24.527] Current version of pixman: 0.42.2
[ 24.527] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.527] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.527] (==) Log file: "/home/Rick/.local/share/xorg/Xorg.0.log", Time: Sun Dec 31 12:20:39 2023
[ 24.530] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 24.530] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.532] (==) No Layout section. Using the first Screen section.
[ 24.532] (==) No screen section available. Using defaults.
[ 24.532] (**) |-->Screen "Default Screen Section" (0)
[ 24.532] (**) | |-->Monitor "<default monitor>"
[ 24.532] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 24.532] (==) Automatically adding devices
[ 24.532] (==) Automatically enabling devices
[ 24.532] (==) Automatically adding GPU devices
[ 24.532] (==) Automatically binding GPU devices
[ 24.532] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 24.532] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 24.532] Entry deleted from font path.
[ 24.533] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 24.533] Entry deleted from font path.
[ 24.533] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 24.533] Entry deleted from font path.
[ 24.534] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 24.534] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.534] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.534] (II) Module ABI versions:
[ 24.534] X.Org ANSI C Emulation: 0.4
[ 24.534] X.Org Video Driver: 25.2
[ 24.534] X.Org XInput driver : 24.4
[ 24.534] X.Org Server Extension : 10.0
[ 24.535] (++) using VT number 1
[ 24.536] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 24.537] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 24.537] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 24.537] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 24.538] (--) PCI:*(0@0:2:0) 8086:9a49:103c:87fd rev 1, Mem @ 0x6002000000/16777216, 0x4000000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 24.538] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.538] (II) LoadModule: "glx"
[ 24.539] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.541] (II) Module glx: vendor="X.Org Foundation"
[ 24.541] compiled for 1.21.1.8, module version = 1.0.0
[ 24.541] ABI class: X.Org Server Extension, version 10.0
[ 24.541] (==) Matched intel as autoconfigured driver 0
[ 24.541] (==) Matched modesetting as autoconfigured driver 1
[ 24.541] (==) Matched fbdev as autoconfigured driver 2
[ 24.541] (==) Matched vesa as autoconfigured driver 3
[ 24.541] (==) Assigned the driver to the xf86ConfigLayout
[ 24.541] (II) LoadModule: "intel"
[ 24.541] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 24.542] (II) Module intel: vendor="X.Org Foundation"
[ 24.542] compiled for 1.21.1.6, module version = 2.99.917
[ 24.542] Module class: X.Org Video Driver
[ 24.542] ABI class: X.Org Video Driver, version 25.2
[ 24.542] (II) LoadModule: "modesetting"
[ 24.542] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24.543] (II) Module modesetting: vendor="X.Org Foundation"
[ 24.543] compiled for 1.21.1.8, module version = 1.21.1
[ 24.543] Module class: X.Org Video Driver
[ 24.543] ABI class: X.Org Video Driver, version 25.2
[ 24.543] (II) LoadModule: "fbdev"
[ 24.544] (WW) Warning, couldn't open module fbdev
[ 24.544] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 24.544] (II) LoadModule: "vesa"
[ 24.544] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 24.544] (II) Module vesa: vendor="X.Org Foundation"
[ 24.544] compiled for 1.21.1.4, module version = 2.6.0
[ 24.544] Module class: X.Org Video Driver
[ 24.544] ABI class: X.Org Video Driver, version 25.2
[ 24.544] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 24.544] (II) intel: Driver for Intel(R) HD Graphics
[ 24.544] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 24.544] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 24.544] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 24.544] (II) VESA: driver for VESA chipsets: vesa
[ 24.544] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 24.544] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 24.544] (II) intel(0): SNA compiled from 2.99.917-923-gb74b67f0
[ 24.544] (WW) Falling back to old probe method for modesetting
[ 24.545] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 24.545] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 24.545] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 24.545] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 24.545] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 24.545] (==) intel(0): RGB weight 888
[ 24.545] (==) intel(0): Default visual is TrueColor
[ 24.546] (II) intel(0): Output eDP1 has no monitor section
[ 24.546] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 24.546] (II) intel(0): Enabled output eDP1
[ 24.546] (II) intel(0): Output HDMI1 has no monitor section
[ 24.546] (II) intel(0): Enabled output HDMI1
[ 24.546] (II) intel(0): Output DP1 has no monitor section
[ 24.546] (II) intel(0): Enabled output DP1
[ 24.546] (II) intel(0): Output DP2 has no monitor section
[ 24.546] (II) intel(0): Enabled output DP2
[ 24.546] (II) intel(0): Output DP3 has no monitor section
[ 24.546] (II) intel(0): Enabled output DP3
[ 24.546] (II) intel(0): Output DP4 has no monitor section
[ 24.547] (II) intel(0): Enabled output DP4
[ 24.547] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 24.547] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 24.547] (II) intel(0): Enabled output VIRTUAL1
[ 24.547] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 24.547] (==) intel(0): TearFree enabled
[ 24.547] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 24.547] (==) intel(0): DPI set to (96, 96)
[ 24.547] (II) Loading sub module "dri3"
[ 24.547] (II) LoadModule: "dri3"
[ 24.547] (II) Module "dri3" already built-in
[ 24.547] (II) Loading sub module "dri2"
[ 24.547] (II) LoadModule: "dri2"
[ 24.547] (II) Module "dri2" already built-in
[ 24.547] (II) Loading sub module "present"
[ 24.547] (II) LoadModule: "present"
[ 24.547] (II) Module "present" already built-in
[ 24.547] (II) UnloadModule: "modesetting"
[ 24.547] (II) Unloading modesetting
[ 24.547] (II) UnloadModule: "vesa"
[ 24.547] (II) Unloading vesa
[ 24.547] (II) intel(0): SNA initialized with generic backend
[ 24.547] (==) intel(0): Backing store enabled
[ 24.547] (==) intel(0): Silken mouse enabled
[ 24.547] (II) intel(0): HW Cursor enabled
[ 24.547] (==) intel(0): DPMS enabled
[ 24.547] (==) intel(0): Display hotplug detection enabled
[ 24.548] (II) intel(0): Textured video not supported on this hardware or backend
[ 24.548] (II) intel(0): [DRI2] Setup complete
[ 24.548] (II) intel(0): [DRI2] DRI driver: i965
[ 24.548] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 24.548] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 24.548] (II) intel(0): hardware support for Present enabled
[ 24.548] (II) Initializing extension Generic Event Extension
[ 24.548] (II) Initializing extension SHAPE
[ 24.548] (II) Initializing extension MIT-SHM
[ 24.548] (II) Initializing extension XInputExtension
[ 24.548] (II) Initializing extension XTEST
[ 24.548] (II) Initializing extension BIG-REQUESTS
[ 24.548] (II) Initializing extension SYNC
[ 24.548] (II) Initializing extension XKEYBOARD
[ 24.548] (II) Initializing extension XC-MISC
[ 24.548] (II) Initializing extension SECURITY
[ 24.548] (II) Initializing extension XFIXES
[ 24.548] (II) Initializing extension RENDER
[ 24.549] (II) Initializing extension RANDR
[ 24.549] (II) Initializing extension COMPOSITE
[ 24.549] (II) Initializing extension DAMAGE
[ 24.549] (II) Initializing extension MIT-SCREEN-SAVER
[ 24.549] (II) Initializing extension DOUBLE-BUFFER
[ 24.549] (II) Initializing extension RECORD
[ 24.549] (II) Initializing extension DPMS
[ 24.549] (II) Initializing extension Present
[ 24.549] (II) Initializing extension DRI3
[ 24.549] (II) Initializing extension X-Resource
[ 24.549] (II) Initializing extension XVideo
[ 24.549] (II) Initializing extension XVideo-MotionCompensation
[ 24.549] (II) Initializing extension GLX
[ 24.549] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[ 24.549] (EE) AIGLX error: unable to load driver i965
[ 24.604] (II) IGLX: Loaded and initialized swrast
[ 24.604] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 24.604] (II) Initializing extension XFree86-VidModeExtension
[ 24.604] (II) Initializing extension XFree86-DGA
[ 24.604] (II) Initializing extension XFree86-DRI
[ 24.604] (II) Initializing extension DRI2
[ 24.606] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 24.609] (II) intel(0): Setting screen physical size to 361 x 203
[ 24.656] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 24.656] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 24.656] (**) Power Button: Applying InputClass "keyboard"
[ 24.656] (II) LoadModule: "libinput"
[ 24.656] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 24.659] (II) Module libinput: vendor="X.Org Foundation"
[ 24.659] compiled for 1.21.1.8, module version = 1.4.0
[ 24.659] Module class: X.Org XInput Driver
[ 24.659] ABI class: X.Org XInput driver, version 24.4
[ 24.659] (II) Using input driver 'libinput' for 'Power Button'
[ 24.660] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 23 paused 0
[ 24.660] (**) Power Button: always reports core events
[ 24.660] (**) Option "Device" "/dev/input/event2"
[ 24.663] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 24.663] (II) event2 - Power Button: device is a keyboard
[ 24.663] (II) event2 - Power Button: device removed
[ 24.663] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 24.663] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.663] (**) Option "AutoRepeat" "350 50"
[ 24.663] (**) AutoRepeat: 350 50
[ 24.663] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 24.663] (II) event2 - Power Button: device is a keyboard
[ 24.663] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 24.663] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 24.663] (**) Video Bus: Applying InputClass "keyboard"
[ 24.663] (II) Using input driver 'libinput' for 'Video Bus'
[ 24.664] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 26 paused 0
[ 24.664] (**) Video Bus: always reports core events
[ 24.664] (**) Option "Device" "/dev/input/event3"
[ 24.664] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 24.664] (II) event3 - Video Bus: device is a keyboard
[ 24.664] (II) event3 - Video Bus: device removed
[ 24.664] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event3"
[ 24.664] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 24.665] (**) Option "AutoRepeat" "350 50"
[ 24.665] (**) AutoRepeat: 350 50
[ 24.665] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 24.665] (II) event3 - Video Bus: device is a keyboard
[ 24.665] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 24.665] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 24.665] (**) Power Button: Applying InputClass "keyboard"
[ 24.665] (II) Using input driver 'libinput' for 'Power Button'
[ 24.666] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 27 paused 0
[ 24.666] (**) Power Button: always reports core events
[ 24.666] (**) Option "Device" "/dev/input/event1"
[ 24.666] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 24.666] (II) event1 - Power Button: device is a keyboard
[ 24.666] (II) event1 - Power Button: device removed
[ 24.666] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 24.666] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 24.666] (**) Option "AutoRepeat" "350 50"
[ 24.666] (**) AutoRepeat: 350 50
[ 24.667] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 24.667] (II) event1 - Power Button: device is a keyboard
[ 24.667] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 24.667] (II) No input driver specified, ignoring this device.
[ 24.667] (II) This device may have been added with another device file.
[ 24.667] (II) config/udev: Adding input device HP TrueVision HD Camera: HP Tru (/dev/input/event9)
[ 24.667] (**) HP TrueVision HD Camera: HP Tru: Applying InputClass "libinput keyboard catchall"
[ 24.667] (**) HP TrueVision HD Camera: HP Tru: Applying InputClass "keyboard"
[ 24.667] (II) Using input driver 'libinput' for 'HP TrueVision HD Camera: HP Tru'
[ 24.668] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 28 paused 0
[ 24.668] (**) HP TrueVision HD Camera: HP Tru: always reports core events
[ 24.668] (**) Option "Device" "/dev/input/event9"
[ 24.668] (II) event9 - HP TrueVision HD Camera: HP Tru: is tagged by udev as: Keyboard
[ 24.668] (II) event9 - HP TrueVision HD Camera: HP Tru: device is a keyboard
[ 24.669] (II) event9 - HP TrueVision HD Camera: HP Tru: device removed
[ 24.669] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input15/event9"
[ 24.669] (II) XINPUT: Adding extended input device "HP TrueVision HD Camera: HP Tru" (type: KEYBOARD, id 9)
[ 24.669] (**) Option "AutoRepeat" "350 50"
[ 24.669] (**) AutoRepeat: 350 50
[ 24.669] (II) event9 - HP TrueVision HD Camera: HP Tru: is tagged by udev as: Keyboard
[ 24.669] (II) event9 - HP TrueVision HD Camera: HP Tru: device is a keyboard
[ 24.669] (II) config/udev: Adding input device SYNA32AD:00 06CB:CD50 Mouse (/dev/input/event7)
[ 24.669] (**) SYNA32AD:00 06CB:CD50 Mouse: Applying InputClass "libinput pointer catchall"
[ 24.669] (II) Using input driver 'libinput' for 'SYNA32AD:00 06CB:CD50 Mouse'
[ 24.670] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 29 paused 0
[ 24.670] (**) SYNA32AD:00 06CB:CD50 Mouse: always reports core events
[ 24.670] (**) Option "Device" "/dev/input/event7"
[ 24.671] (II) event7 - SYNA32AD:00 06CB:CD50 Mouse: is tagged by udev as: Mouse Pointingstick
[ 24.671] (II) event7 - SYNA32AD:00 06CB:CD50 Mouse: device is a pointer
[ 24.671] (II) event7 - SYNA32AD:00 06CB:CD50 Mouse: device removed
[ 24.671] (II) libinput: SYNA32AD:00 06CB:CD50 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 24.671] (II) libinput: SYNA32AD:00 06CB:CD50 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 24.671] (II) libinput: SYNA32AD:00 06CB:CD50 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 24.671] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-SYNA32AD:00/0018:06CB:CD50.0001/input/input12/event7"
[ 24.671] (II) XINPUT: Adding extended input device "SYNA32AD:00 06CB:CD50 Mouse" (type: MOUSE, id 10)
[ 24.671] (**) Option "AccelerationScheme" "none"
[ 24.671] (**) SYNA32AD:00 06CB:CD50 Mouse: (accel) selected scheme none/0
[ 24.671] (**) SYNA32AD:00 06CB:CD50 Mouse: (accel) acceleration factor: 2.000
[ 24.671] (**) SYNA32AD:00 06CB:CD50 Mouse: (accel) acceleration threshold: 4
[ 24.672] (II) event7 - SYNA32AD:00 06CB:CD50 Mouse: is tagged by udev as: Mouse Pointingstick
[ 24.672] (II) event7 - SYNA32AD:00 06CB:CD50 Mouse: device is a pointer
[ 24.672] (II) config/udev: Adding input device SYNA32AD:00 06CB:CD50 Mouse (/dev/input/mouse0)
[ 24.672] (II) No input driver specified, ignoring this device.
[ 24.672] (II) This device may have been added with another device file.
[ 24.672] (II) config/udev: Adding input device SYNA32AD:00 06CB:CD50 Touchpad (/dev/input/event8)
[ 24.672] (**) SYNA32AD:00 06CB:CD50 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 24.672] (**) SYNA32AD:00 06CB:CD50 Touchpad: Applying InputClass "touchpad catchall"
[ 24.672] (**) SYNA32AD:00 06CB:CD50 Touchpad: Applying InputClass "Default clickpad buttons"
[ 24.672] (**) SYNA32AD:00 06CB:CD50 Touchpad: Applying InputClass "touchpad catchall"
[ 24.672] (**) SYNA32AD:00 06CB:CD50 Touchpad: Applying InputClass "Default clickpad buttons"
[ 24.672] (**) SYNA32AD:00 06CB:CD50 Touchpad: Applying InputClass "touchpad"
[ 24.672] (II) LoadModule: "synaptics"
[ 24.672] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 24.673] (II) Module synaptics: vendor="X.Org Foundation"
[ 24.673] compiled for 1.21.1.3, module version = 1.9.2
[ 24.673] Module class: X.Org XInput Driver
[ 24.673] ABI class: X.Org XInput driver, version 24.4
[ 24.673] (II) Using input driver 'synaptics' for 'SYNA32AD:00 06CB:CD50 Touchpad'
[ 24.674] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 30 paused 0
[ 24.674] (**) SYNA32AD:00 06CB:CD50 Touchpad: always reports core events
[ 24.674] (**) Option "Device" "/dev/input/event8"
[ 24.674] (II) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: found clickpad property
[ 24.674] (--) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: x-axis range 0 - 1272 (res 12)
[ 24.674] (--) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: y-axis range 0 - 612 (res 12)
[ 24.674] (II) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: device does not report pressure, will use touch data.
[ 24.674] (II) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: device does not report finger width.
[ 24.674] (--) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: buttons: left double triple
[ 24.674] (--) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: Vendor 0x6cb Product 0xcd50
[ 24.674] (--) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: invalid pressure range. defaulting to 0 - 255
[ 24.674] (--) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: invalid finger width range. defaulting to 0 - 15
[ 24.674] (**) Option "FingerLow" "30"
[ 24.674] (**) Option "FingerHigh" "50"
[ 24.674] (**) Option "MaxTapTime" "125"
[ 24.674] (**) Option "EmulateTwoFingerMinZ" "40"
[ 24.674] (**) Option "EmulateTwoFingerMinW" "8"
[ 24.674] (**) Option "VertEdgeScroll" "on"
[ 24.674] (**) Option "HorizEdgeScroll" "on"
[ 24.674] (**) Option "VertTwoFingerScroll" "on"
[ 24.674] (**) Option "HorizTwoFingerScroll" "on"
[ 24.674] (**) Option "TapButton1" "1"
[ 24.674] (**) Option "TapButton2" "3"
[ 24.674] (**) Option "TapButton3" "2"
[ 24.674] (**) Option "CircularScrolling" "on"
[ 24.674] (**) Option "CircScrollTrigger" "2"
[ 24.674] (**) Option "CoastingSpeed" "0"
[ 24.674] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 24.674] (--) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: touchpad found
[ 24.674] (**) SYNA32AD:00 06CB:CD50 Touchpad: always reports core events
[ 24.674] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-SYNA32AD:00/0018:06CB:CD50.0001/input/input13/event8"
[ 24.674] (II) XINPUT: Adding extended input device "SYNA32AD:00 06CB:CD50 Touchpad" (type: TOUCHPAD, id 11)
[ 24.674] (**) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 24.674] (**) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: (accel) MaxSpeed is now 1.75
[ 24.674] (**) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: (accel) AccelFactor is now 0.142
[ 24.674] (**) SYNA32AD:00 06CB:CD50 Touchpad: (accel) keeping acceleration scheme 1
[ 24.674] (**) SYNA32AD:00 06CB:CD50 Touchpad: (accel) acceleration profile 1
[ 24.674] (**) SYNA32AD:00 06CB:CD50 Touchpad: (accel) acceleration factor: 2.000
[ 24.674] (**) SYNA32AD:00 06CB:CD50 Touchpad: (accel) acceleration threshold: 4
[ 24.674] (--) synaptics: SYNA32AD:00 06CB:CD50 Touchpad: touchpad found
[ 24.674] (II) config/udev: Adding input device SYNA32AD:00 06CB:CD50 Touchpad (/dev/input/mouse1)
[ 24.674] (**) SYNA32AD:00 06CB:CD50 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 24.675] (II) config/udev: Adding input device sof-hda-dsp Mic (/dev/input/event10)
[ 24.675] (II) No input driver specified, ignoring this device.
[ 24.675] (II) This device may have been added with another device file.
[ 24.675] (II) config/udev: Adding input device sof-hda-dsp Headphone (/dev/input/event11)
[ 24.675] (II) No input driver specified, ignoring this device.
[ 24.675] (II) This device may have been added with another device file.
[ 24.675] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=3 (/dev/input/event12)
[ 24.675] (II) No input driver specified, ignoring this device.
[ 24.675] (II) This device may have been added with another device file.
[ 24.675] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=4 (/dev/input/event13)
[ 24.675] (II) No input driver specified, ignoring this device.
[ 24.675] (II) This device may have been added with another device file.
[ 24.675] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=5 (/dev/input/event14)
[ 24.675] (II) No input driver specified, ignoring this device.
[ 24.675] (II) This device may have been added with another device file.
[ 24.675] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event15)
[ 24.675] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 24.675] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[ 24.675] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 24.676] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 31 paused 0
[ 24.676] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.676] (**) Option "Device" "/dev/input/event15"
[ 24.676] (II) event15 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 24.677] (II) event15 - AT Translated Set 2 keyboard: device is a keyboard
[ 24.677] (II) event15 - AT Translated Set 2 keyboard: device removed
[ 24.677] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input61/event15"
[ 24.677] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 24.677] (**) Option "AutoRepeat" "350 50"
[ 24.677] (**) AutoRepeat: 350 50
[ 24.677] (II) event15 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 24.677] (II) event15 - AT Translated Set 2 keyboard: device is a keyboard
[ 24.678] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 24.678] (II) No input driver specified, ignoring this device.
[ 24.678] (II) This device may have been added with another device file.
[ 24.679] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[ 24.679] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 24.679] (**) HP WMI hotkeys: Applying InputClass "keyboard"
[ 24.679] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 24.679] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 32 paused 0
[ 24.679] (**) HP WMI hotkeys: always reports core events
[ 24.679] (**) Option "Device" "/dev/input/event6"
[ 24.680] (II) event6 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 24.680] (II) event6 - HP WMI hotkeys: device is a keyboard
[ 24.680] (II) event6 - HP WMI hotkeys: device removed
[ 24.680] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event6"
[ 24.680] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[ 24.680] (**) Option "AutoRepeat" "350 50"
[ 24.680] (**) AutoRepeat: 350 50
[ 24.680] (II) event6 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 24.680] (II) event6 - HP WMI hotkeys: device is a keyboard
[ 24.680] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event4)
[ 24.680] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[ 24.680] (**) Wireless hotkeys: Applying InputClass "keyboard"
[ 24.680] (II) Using input driver 'libinput' for 'Wireless hotkeys'
[ 24.681] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 33 paused 0
[ 24.681] (**) Wireless hotkeys: always reports core events
[ 24.681] (**) Option "Device" "/dev/input/event4"
[ 24.681] (II) event4 - Wireless hotkeys: is tagged by udev as: Keyboard
[ 24.681] (II) event4 - Wireless hotkeys: device is a keyboard
[ 24.682] (II) event4 - Wireless hotkeys: device removed
[ 24.682] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event4"
[ 24.682] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 14)
[ 24.682] (**) Option "AutoRepeat" "350 50"
[ 24.682] (**) AutoRepeat: 350 50
[ 24.682] (II) event4 - Wireless hotkeys: is tagged by udev as: Keyboard
[ 24.682] (II) event4 - Wireless hotkeys: device is a keyboard
[ 26.548] (II) intel(0): EDID vendor "AUO", prod id 52624
[ 26.548] (II) intel(0): Printing DDC gathered Modelines:
[ 26.548] (II) intel(0): Modeline "1366x768"x0.0 76.30 1366 1404 1426 1592 768 771 777 798 -hsync -vsync (47.9 kHz eP)
[ 26.548] (II) intel(0): Modeline "1366x768"x0.0 50.87 1366 1404 1426 1592 768 771 777 798 -hsync -vsync (32.0 kHz e)I should also add that the issue is presistant on LTS kernel
Offline
#7 2023-12-31 10:18:06
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,961
Re: Arch LINUX RANDOMLY FREEZES,SCREEN GLITCHES AND KERNAL PANIC RANDOMLY
[ 24.541] (II) LoadModule: "intel"
[ 24.541] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 24.542] (II) Module intel: vendor="X.Org Foundation"
[ 24.542] compiled for 1.21.1.6, module version = 2.99.917
[ 24.542] Module class: X.Org Video Driver
[ 24.542] ABI class: X.Org Video Driver, version 25.2remove xf86-video-intel , your hardware is many years too new for that driver.
In case X doesn't start after removing it, check the files in /etc/X11/xorg.conf.d/ for references to intel .
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#8 2024-01-06 11:07:03
- eyuman212
- Member
- Registered: 2023-12-28
- Posts: 4
Re: Arch LINUX RANDOMLY FREEZES,SCREEN GLITCHES AND KERNAL PANIC RANDOMLY
Lone_Wolf wrote:
[ 24.541] (II) LoadModule: "intel" [ 24.541] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 24.542] (II) Module intel: vendor="X.Org Foundation" [ 24.542] compiled for 1.21.1.6, module version = 2.99.917 [ 24.542] Module class: X.Org Video Driver [ 24.542] ABI class: X.Org Video Driver, version 25.2remove xf86-video-intel , your hardware is many years too new for that driver.
In case X doesn't start after removing it, check the files in /etc/X11/xorg.conf.d/ for references to intel .
I installed xf86-video-intel when I can't figure anything out, so I though it might be a driver issue, but the issue happen before xf86-intel
Offline
#9 2024-01-06 11:09:42
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,771
Re: Arch LINUX RANDOMLY FREEZES,SCREEN GLITCHES AND KERNAL PANIC RANDOMLY
That doesn't matter, xf86-video-intel is not a fix for anything and will falsify any tests. Remove it, reboot, reproduce the issue, repost a xorg log and post the journal with the command seth asked you for in any case.
Offline