Arch Linux

vCordero

Member

Registered: 2024-01-07

Posts: 22

[SOLVED] No audio output devices are detected with pulseaudio just Dum

I have a Samsung Galaxy Book3 Pro and pulseaudio doesn't recognize any device output for audio. I have alsa too, but I haven't figured out how to solve this. I'm new to arch, so I'm not sure how to properly use these audio software.
Apart from that issue, when I plug in earphones they aren't recognized either.

Here is the output when I run "pactl list sinks":

Sink #0
        State: SUSPENDED
        Name: auto_null
        Description: Dummy Output
        Driver: module-null-sink.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 14
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: auto_null.monitor
        Latency: 0 usec, configured 0 usec
        Flags: DECIBEL_VOLUME LATENCY SET_FORMATS
        Properties:
                device.description = "Dummy Output"
                device.class = "abstract"
                device.icon_name = "audio-card"
        Formats:
                pcm

Meanwhile, when I run "pacmd list", this is the output:

...
0 card(s) available.
0 sink input(s) available.
0 source output(s) available.
0 cache entrie(s) available.

The output is the same even when I plug in the earphones.
Thanks for helping

Last edited by vCordero (2024-03-29 18:18:26)

seth

Member

Registered: 2012-09-03

Posts: 64,565

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

aplay -lL
sudo journalctl -b | curl -F 'file=@-' 0x0.st

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

vCordero

Member

Registered: 2024-01-07

Posts: 22

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

Currently I have an issue with pulseaudio and pipewire. I seems like pipewire is active, so I removed pulseaudio by doing

sudo pacman -S pipewire pipewire-pulse wireplumber pipewire-alsa pipewire-jack

So I suppose that I'm not using pulseaudio anymore. However, the problem is still there, as there are no cards recognized. Here is the output of that command:

aplay -lL

null
    Discard all samples (playback) or generate zero samples (capture)
pipewire
    PipeWire Sound Server
default
    Default ALSA Output (currently PipeWire Media Server)
aplay: device_list:277: no soundcards found...
[vicho@GB3Pro ~]$ 

And the second command I'm not so sure what it is for...?

seth

Member

Registered: 2012-09-03

Posts: 64,565

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

It's for posting your system journal so we can see what HW is actually there, what modules are loaded and whether there're any errors

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

vCordero

Member

Registered: 2024-01-07

Posts: 22

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

ok, thanks for the explanation! Here's the output:

sudo journalctl -b | curl -F 'file=@-' 0x0.st

[url]http://0x0.st/H6Cc.txt[/url]

Last edited by vCordero (2024-01-07 20:05:41)

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 24,479

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

Jan 07 13:28:17 GB3Pro kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5
Jan 07 13:28:17 GB3Pro kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
Jan 07 13:28:17 GB3Pro kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2
Jan 07 13:28:17 GB3Pro kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: Direct firmware load for intel/sof/sof-rpl.ri failed with error -2
Jan 07 13:28:17 GB3Pro kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: error: sof firmware file is missing, you might need to
Jan 07 13:28:17 GB3Pro kernel: sof-audio-pci-intel-tgl 0000:00:1f.3:        download it from https://github.com/thesofproject/sof-bin/
Jan 07 13:28:17 GB3Pro kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: error: failed to load DSP firmware -2
Jan 07 13:28:17 GB3Pro kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: error: sof_probe_work failed err: -2

Install the sof-firmware package and reboot.

Last edited by V1del (2024-01-07 20:25:01)

vCordero

Member

Registered: 2024-01-07

Posts: 22

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

That seemed to work! Now my cards are recognized, but I still can hear anything. I'm not sure if anything is muted, maybe. Here is some information that may be useful:

pactl list cards

Card #41
        Name: alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic
        Driver: alsa
        Owner Module: n/a
        Properties:
                api.acp.auto-port = "false"
                api.acp.auto-profile = "false"
                api.alsa.card = "0"
                api.alsa.card.longname = "SAMSUNGELECTRONICSCO.LTD.-960XFG-P06RGU-NP960XFG_KC2CL"
                api.alsa.card.name = "sof-hda-dsp"
                api.alsa.path = "hw:0"
                api.alsa.use-acp = "true"
                api.dbus.ReserveDevice1 = "Audio0"
                device.api = "alsa"
                device.bus = "pci"
                device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
                device.description = "Raptor Lake-P/U/H cAVS"
                device.enum.api = "udev"
                device.icon_name = "audio-card-analog-pci"
                device.name = "alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic"
                device.nick = "sof-hda-dsp"
                device.plugged.usec = "5838767"
                device.product.id = "0x51ca"
                device.product.name = "Raptor Lake-P/U/H cAVS"
                device.subsystem = "sound"
                sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0"
                device.vendor.id = "0x8086"
                device.vendor.name = "Intel Corporation"
                media.class = "Audio/Device"
                factory.id = "14"
                client.id = "34"
                object.id = "41"
                object.serial = "41"
                object.path = "alsa:pcm:0"
                alsa.card = "0"
                alsa.card_name = "sof-hda-dsp"
                alsa.long_card_name = "SAMSUNGELECTRONICSCO.LTD.-960XFG-P06RGU-NP960XFG_KC2CL"
                alsa.driver_name = "snd_soc_skl_hda_dsp"
                device.string = "0"
        Profiles:
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
                HiFi: Play HiFi quality Music (sinks: 4, sources: 2, priority: 8000, available: yes)
                pro-audio: Pro Audio (sinks: 5, sources: 3, priority: 1, available: yes)
        Active Profile: HiFi
        Ports:
                [Out] HDMI3: HDMI / DisplayPort 3 Output (type: HDMI, priority: 700, latency offset: 0 usec, availability group: HDMI/DP,pcm=5, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "HDMI/DP,pcm=5"
                                device.icon_name = "video-display"
                                card.profile.port = "0"
                        Part of profile(s): HiFi
                [Out] HDMI2: HDMI / DisplayPort 2 Output (type: HDMI, priority: 600, latency offset: 0 usec, availability group: HDMI/DP,pcm=4, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "HDMI/DP,pcm=4"
                                device.icon_name = "video-display"
                                card.profile.port = "1"
                        Part of profile(s): HiFi
                [Out] HDMI1: HDMI / DisplayPort 1 Output (type: HDMI, priority: 500, latency offset: 0 usec, availability group: HDMI/DP,pcm=3, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "HDMI/DP,pcm=3"
                                device.icon_name = "video-display"
                                card.profile.port = "2"
                        Part of profile(s): HiFi
                [Out] Speaker: Speaker (type: Speaker, priority: 100, latency offset: 0 usec, availability unknown)
                        Properties:
                                port.type = "speaker"
                                device.icon_name = "audio-speakers"
                                card.profile.port = "3"
                        Part of profile(s): HiFi
                [Out] Headphones: Headphones (type: Headphones, priority: 200, latency offset: 0 usec, availability group: Headphone, not available)
                        Properties:
                                port.type = "headphones"
                                port.availability-group = "Headphone"
                                device.icon_name = "audio-headphones"
                                card.profile.port = "4"
                        Part of profile(s): HiFi
                [In] Mic2: Headphones Stereo Microphone (type: Mic, priority: 200, latency offset: 0 usec, availability group: Mic, not available)
                        Properties:
                                port.type = "mic"
                                port.availability-group = "Mic"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "5"
                        Part of profile(s): HiFi
                [In] Mic1: Digital Microphone (type: Mic, priority: 100, latency offset: 0 usec, availability unknown)
                        Properties:
                                port.type = "mic"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "6"
                        Part of profile(s): HiFi

pactl list sinks

Sink #46
        State: SUSPENDED
        Name: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_5__sink
        Description: Raptor Lake-P/U/H cAVS HDMI / DisplayPort 3 Output
        Driver: PipeWire
        Sample Specification: s24-32le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 4294967295
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_5__sink.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.card = "0"
                alsa.card_name = "sof-hda-dsp"
                alsa.class = "generic"
                alsa.device = "5"
                alsa.driver_name = "snd_soc_skl_hda_dsp"
                alsa.id = "HDMI3 (*)"
                alsa.long_card_name = "SAMSUNGELECTRONICSCO.LTD.-960XFG-P06RGU-NP960XFG_KC2CL"
                alsa.mixer_device = "_ucm0001.hw:sofhdadsp"
                alsa.name = ""
                alsa.resolution_bits = "16"
                alsa.subclass = "generic-mix"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                api.alsa.card.longname = "SAMSUNGELECTRONICSCO.LTD.-960XFG-P06RGU-NP960XFG_KC2CL"
                api.alsa.card.name = "sof-hda-dsp"
                api.alsa.open.ucm = "true"
                api.alsa.path = "hw:sofhdadsp,5"
                api.alsa.pcm.card = "0"
                api.alsa.pcm.stream = "playback"
                audio.channels = "2"
                audio.position = "FL,FR"
                card.profile.device = "0"
                device.api = "alsa"
                device.class = "sound"
                device.id = "41"
                device.profile.description = "HDMI / DisplayPort 3 Output"
                device.profile.name = "HiFi: hw:sofhdadsp,5: sink"
                device.routes = "1"
                factory.name = "api.alsa.pcm.sink"
                media.class = "Audio/Sink"
                device.description = "Raptor Lake-P/U/H cAVS"
                node.name = "alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_5__sink"
                node.nick = "HDMI / DisplayPort 3 Output"
                node.pause-on-idle = "false"
                object.path = "alsa:pcm:0:hw:sofhdadsp,5:playback"
                priority.driver = "664"
                priority.session = "664"
                factory.id = "18"
                clock.quantum-limit = "8192"
                client.id = "34"
                node.driver = "true"
                factory.mode = "merge"
                audio.adapt.follower = ""
                library.name = "audioconvert/libspa-audioconvert"
                object.id = "46"
                object.serial = "46"
                api.acp.auto-port = "false"
                api.acp.auto-profile = "false"
                api.alsa.card = "0"
                api.alsa.use-acp = "true"
                api.dbus.ReserveDevice1 = "Audio0"
                device.bus = "pci"
                device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
                device.enum.api = "udev"
                device.icon_name = "audio-card-analog-pci"
                device.name = "alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic"
                device.nick = "sof-hda-dsp"
                device.plugged.usec = "5838767"
                device.product.id = "0x51ca"
                device.product.name = "Raptor Lake-P/U/H cAVS"
                device.subsystem = "sound"
                sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0"
                device.vendor.id = "0x8086"
                device.vendor.name = "Intel Corporation"
                device.string = "0"
        Ports:
                [Out] HDMI3: HDMI / DisplayPort 3 Output (type: HDMI, priority: 700, availability group: HDMI/DP,pcm=5, not available)
        Active Port: [Out] HDMI3
        Formats:
                pcm

Sink #47
        State: SUSPENDED
        Name: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_4__sink
        Description: Raptor Lake-P/U/H cAVS HDMI / DisplayPort 2 Output
        Driver: PipeWire
        Sample Specification: s24-32le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 4294967295
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_4__sink.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.card = "0"
                alsa.card_name = "sof-hda-dsp"
                alsa.class = "generic"
                alsa.device = "4"
                alsa.driver_name = "snd_soc_skl_hda_dsp"
                alsa.id = "HDMI2 (*)"
                alsa.long_card_name = "SAMSUNGELECTRONICSCO.LTD.-960XFG-P06RGU-NP960XFG_KC2CL"
                alsa.mixer_device = "_ucm0001.hw:sofhdadsp"
                alsa.name = ""
                alsa.resolution_bits = "16"
                alsa.subclass = "generic-mix"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                api.alsa.card.longname = "SAMSUNGELECTRONICSCO.LTD.-960XFG-P06RGU-NP960XFG_KC2CL"
                api.alsa.card.name = "sof-hda-dsp"
                api.alsa.open.ucm = "true"
                api.alsa.path = "hw:sofhdadsp,4"
                api.alsa.pcm.card = "0"
                api.alsa.pcm.stream = "playback"
                audio.channels = "2"
                audio.position = "FL,FR"
                card.profile.device = "1"
                device.api = "alsa"
                device.class = "sound"
                device.id = "41"
                device.profile.description = "HDMI / DisplayPort 2 Output"
                device.profile.name = "HiFi: hw:sofhdadsp,4: sink"
                device.routes = "1"
                factory.name = "api.alsa.pcm.sink"
                media.class = "Audio/Sink"
                device.description = "Raptor Lake-P/U/H cAVS"
                node.name = "alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_4__sink"
                node.nick = "HDMI / DisplayPort 2 Output"
                node.pause-on-idle = "false"
                object.path = "alsa:pcm:0:hw:sofhdadsp,4:playback"
                priority.driver = "680"
                priority.session = "680"
                factory.id = "18"
                clock.quantum-limit = "8192"
                client.id = "34"
                node.driver = "true"
                factory.mode = "merge"
                audio.adapt.follower = ""
                library.name = "audioconvert/libspa-audioconvert"
                object.id = "47"
                object.serial = "47"
                api.acp.auto-port = "false"
                api.acp.auto-profile = "false"
                api.alsa.card = "0"
                api.alsa.use-acp = "true"
                api.dbus.ReserveDevice1 = "Audio0"
                device.bus = "pci"
                device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
                device.enum.api = "udev"
                device.icon_name = "audio-card-analog-pci"
                device.name = "alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic"
                device.nick = "sof-hda-dsp"
                device.plugged.usec = "5838767"
                device.product.id = "0x51ca"
                device.product.name = "Raptor Lake-P/U/H cAVS"
                device.subsystem = "sound"
                sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0"
                device.vendor.id = "0x8086"
                device.vendor.name = "Intel Corporation"
                device.string = "0"
        Ports:
                [Out] HDMI2: HDMI / DisplayPort 2 Output (type: HDMI, priority: 600, availability group: HDMI/DP,pcm=4, not available)
        Active Port: [Out] HDMI2
        Formats:
                pcm

Sink #48
        State: SUSPENDED
        Name: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_3__sink
        Description: Raptor Lake-P/U/H cAVS HDMI / DisplayPort 1 Output
        Driver: PipeWire
        Sample Specification: s24-32le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 4294967295
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_3__sink.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.card = "0"
                alsa.card_name = "sof-hda-dsp"
                alsa.class = "generic"
                alsa.device = "3"
                alsa.driver_name = "snd_soc_skl_hda_dsp"
                alsa.id = "HDMI1 (*)"
                alsa.long_card_name = "SAMSUNGELECTRONICSCO.LTD.-960XFG-P06RGU-NP960XFG_KC2CL"
                alsa.mixer_device = "_ucm0001.hw:sofhdadsp"
                alsa.name = ""
                alsa.resolution_bits = "16"
                alsa.subclass = "generic-mix"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                api.alsa.card.longname = "SAMSUNGELECTRONICSCO.LTD.-960XFG-P06RGU-NP960XFG_KC2CL"
                api.alsa.card.name = "sof-hda-dsp"
                api.alsa.open.ucm = "true"
                api.alsa.path = "hw:sofhdadsp,3"
                api.alsa.pcm.card = "0"
                api.alsa.pcm.stream = "playback"
                audio.channels = "2"
                audio.position = "FL,FR"
                card.profile.device = "2"
                device.api = "alsa"
                device.class = "sound"
                device.id = "41"
                device.profile.description = "HDMI / DisplayPort 1 Output"
                device.profile.name = "HiFi: hw:sofhdadsp,3: sink"
                device.routes = "1"
                factory.name = "api.alsa.pcm.sink"
                media.class = "Audio/Sink"
                device.description = "Raptor Lake-P/U/H cAVS"
                node.name = "alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_3__sink"
                node.nick = "HDMI / DisplayPort 1 Output"
                node.pause-on-idle = "false"
                object.path = "alsa:pcm:0:hw:sofhdadsp,3:playback"
                priority.driver = "696"
                priority.session = "696"
                factory.id = "18"
                clock.quantum-limit = "8192"
                client.id = "34"
                node.driver = "true"
                factory.mode = "merge"
                audio.adapt.follower = ""
                library.name = "audioconvert/libspa-audioconvert"
                object.id = "48"
                object.serial = "48"
                api.acp.auto-port = "false"
                api.acp.auto-profile = "false"
                api.alsa.card = "0"
                api.alsa.use-acp = "true"
                api.dbus.ReserveDevice1 = "Audio0"
                device.bus = "pci"
                device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
                device.enum.api = "udev"
                device.icon_name = "audio-card-analog-pci"
                device.name = "alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic"
                device.nick = "sof-hda-dsp"
                device.plugged.usec = "5838767"
                device.product.id = "0x51ca"
                device.product.name = "Raptor Lake-P/U/H cAVS"
                device.subsystem = "sound"
                sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0"
                device.vendor.id = "0x8086"
                device.vendor.name = "Intel Corporation"
                device.string = "0"
        Ports:
                [Out] HDMI1: HDMI / DisplayPort 1 Output (type: HDMI, priority: 500, availability group: HDMI/DP,pcm=3, not available)
        Active Port: [Out] HDMI1
        Formats:
                pcm

Sink #49
        State: SUSPENDED
        Name: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__sink
        Description: Raptor Lake-P/U/H cAVS Speaker + Headphones
        Driver: PipeWire
        Sample Specification: s32le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 4294967295
        Mute: no
        Volume: front-left: 26214 /  40% / -23.88 dB,   front-right: 26214 /  40% / -23.88 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__sink.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.card = "0"
                alsa.card_name = "sof-hda-dsp"
                alsa.class = "generic"
                alsa.device = "0"
                alsa.driver_name = "snd_soc_skl_hda_dsp"
                alsa.id = "HDA Analog (*)"
                alsa.long_card_name = "SAMSUNGELECTRONICSCO.LTD.-960XFG-P06RGU-NP960XFG_KC2CL"
                alsa.mixer_device = "_ucm0001.hw:sofhdadsp"
                alsa.name = ""
                alsa.resolution_bits = "16"
                alsa.subclass = "generic-mix"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                api.alsa.card.longname = "SAMSUNGELECTRONICSCO.LTD.-960XFG-P06RGU-NP960XFG_KC2CL"
                api.alsa.card.name = "sof-hda-dsp"
                api.alsa.open.ucm = "true"
                api.alsa.path = "hw:sofhdadsp"
                api.alsa.pcm.card = "0"
                api.alsa.pcm.stream = "playback"
                audio.channels = "2"
                audio.position = "FL,FR"
                card.profile.device = "3"
                device.api = "alsa"
                device.class = "sound"
                device.id = "41"
                device.profile.description = "Speaker + Headphones"
                device.profile.name = "HiFi: hw:sofhdadsp: sink"
                device.routes = "2"
                factory.name = "api.alsa.pcm.sink"
                media.class = "Audio/Sink"
                device.description = "Raptor Lake-P/U/H cAVS"
                node.name = "alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__sink"
                node.nick = "Speaker + Headphones"
                node.pause-on-idle = "false"
                object.path = "alsa:pcm:0:hw:sofhdadsp:playback"
                priority.driver = "1000"
                priority.session = "1000"
                factory.id = "18"
                clock.quantum-limit = "8192"
                client.id = "34"
                node.driver = "true"
                factory.mode = "merge"
                audio.adapt.follower = ""
                library.name = "audioconvert/libspa-audioconvert"
                object.id = "49"
                object.serial = "49"
                api.acp.auto-port = "false"
                api.acp.auto-profile = "false"
                api.alsa.card = "0"
                api.alsa.use-acp = "true"
                api.dbus.ReserveDevice1 = "Audio0"
                device.bus = "pci"
                device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
                device.enum.api = "udev"
                device.icon_name = "audio-card-analog-pci"
                device.name = "alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic"
                device.nick = "sof-hda-dsp"
                device.plugged.usec = "5838767"
                device.product.id = "0x51ca"
                device.product.name = "Raptor Lake-P/U/H cAVS"
                device.subsystem = "sound"
                sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0"
                device.vendor.id = "0x8086"
                device.vendor.name = "Intel Corporation"
                device.string = "0"
        Ports:
                [Out] Speaker: Speaker (type: Speaker, priority: 100, availability unknown)
                [Out] Headphones: Headphones (type: Headphones, priority: 200, availability group: Headphone, not available)
        Active Port: [Out] Speaker
        Formats:
                pcm

seth

Member

Registered: 2012-09-03

Posts: 64,565

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

aplay -lL
amixer -c0

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 24,479

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

Of these pulse options the sink you want to play on is "alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__sink" so try

pactl set-default-sink alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__sink

and make sure whatever you're testing is actually playing there.

vCordero

Member

Registered: 2024-01-07

Posts: 22

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

The output of those two commands are:

aplay -lL

null
    Discard all samples (playback) or generate zero samples (capture)
pipewire
    PipeWire Sound Server
default
    Default ALSA Output (currently PipeWire Media Server)
sysdefault:CARD=sofhdadsp
    sof-hda-dsp, 
    Default Audio Device
**** List of PLAYBACK Hardware Devices ****
card 0: sofhdadsp [sof-hda-dsp], device 0: HDA Analog (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 31: HDA Analog Deep Buffer (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0



amixer -c0

Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 127
  Mono: Playback 127 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 80 [63%] [-23.50dB] [off]
  Front Right: Playback 80 [63%] [-23.50dB] [off]
Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 93 [73%] [-17.00dB] [on]
  Front Right: Playback 93 [73%] [-17.00dB] [on]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'IEC958',1
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'IEC958',2
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 127
  Front Left: Capture 76 [60%] [4.50dB] [on]
  Front Right: Capture 76 [60%] [4.50dB] [on]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
Simple mixer control 'Dmic0',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 70
  Front Left: Capture 70 [100%] [20.00dB] [on]
  Front Right: Capture 70 [100%] [20.00dB] [on]
Simple mixer control 'Dmic1 2nd',0
  Capabilities: cvolume
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 70
  Front Left: Capture 50 [71%] [0.00dB]
  Front Right: Capture 50 [71%] [0.00dB]
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
Simple mixer control 'PGA1.0 1 Master',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 32
  Mono:
  Front Left: Playback 32 [100%] [0.00dB]
  Front Right: Playback 32 [100%] [0.00dB]
Simple mixer control 'PGA2.0 2 Master',0
  Capabilities: cvolume
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 80
  Front Left: Capture 50 [62%] [0.00dB]
  Front Right: Capture 50 [62%] [0.00dB]
Simple mixer control 'PGA30.0 30',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 32
  Mono:
  Front Left: Playback 32 [100%] [0.00dB]
  Front Right: Playback 32 [100%] [0.00dB]
Simple mixer control 'PGA31.0 31',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 32
  Mono:
  Front Left: Playback 32 [100%] [0.00dB]
  Front Right: Playback 32 [100%] [0.00dB]
Simple mixer control 'PGA7.0 7 Master',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 32
  Mono:
  Front Left: Playback 32 [100%] [0.00dB]
  Front Right: Playback 32 [100%] [0.00dB]
Simple mixer control 'PGA8.0 8 Master',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 32
  Mono:
  Front Left: Playback 32 [100%] [0.00dB]
  Front Right: Playback 32 [100%] [0.00dB]
Simple mixer control 'PGA9.0 9 Master',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 32
  Mono:
  Front Left: Playback 32 [100%] [0.00dB]
  Front Right: Playback 32 [100%] [0.00dB]

I already run

pactl set-default-sink alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__sink

, but the problem persists.

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 24,479

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

speaker-test -Dhw:0 -c2

does this give you noise?

vCordero

Member

Registered: 2024-01-07

Posts: 22

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

nope

seth

Member

Registered: 2012-09-03

Posts: 64,565

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

Does it help if you plug in headphones?
Please post an updated system journal.

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 24,479

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

Ah wait I didn't see the weird 31 device yet, does

speaker-test -Dhw:0,31 -c2

work?

vCordero

Member

Registered: 2024-01-07

Posts: 22

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

I tried running:

speaker-test -Dhw:0,31 -c2

but it didn't produce any audio.

I don't have headphones to plug in, but bluetooth headphones did work.

Here's an update for the system journal:

sudo journalctl -b | curl -F 'file=@-' 0x0.st

http://0x0.st/HIqs.txt

seth

Member

Registered: 2012-09-03

Posts: 64,565

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

BT HPs are a different device and not relevant. You don't even have the in-ears that get thrown at you with every phone?

There's another thread that may indicate a TGL related sof-firmware regression (while there it crashes)
What if you downgrade sof-firmware, https://archive.archlinux.org/packages/ … kg.tar.zst ?

Otherwise, what if you actually pass "snd_hda_intel.dmic_detect=0" or "snd_intel_dspcfg.dsp_driver=1" to the https://wiki.archlinux.org/title/Kernel_parameters (try either, not both at the same time)

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

vCordero

Member

Registered: 2024-01-07

Posts: 22

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

I tried everything below: both kernel options with and without the sof-firmware regression, but neither worked.

I also found a working pair of headphones that do work when I plug them in, so the problem is with the built-in speakers.

seth

Member

Registered: 2012-09-03

Posts: 64,565

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'

Can you toggle that in "alsamixer -c0"
You could try to keep "mpv -ao alsa thunderstruck.mp3" playing while changing the mixer settings.

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

vCordero

Member

Registered: 2024-01-07

Posts: 22

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

I kept audio in the back, but didn't hear anything while I toggled Auto-Mute mode on. Here's how it looks:

amixer -c0

Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 127
  Mono: Playback 111 [87%] [-8.00dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 0 [0%] [-63.50dB] [off]
  Front Right: Playback 0 [0%] [-63.50dB] [off]
Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 126 [99%] [-0.50dB] [on]
  Front Right: Playback 126 [99%] [-0.50dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 253 [99%] [-0.40dB]
  Front Right: Playback 253 [99%] [-0.40dB]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 2 [67%] [20.00dB]
  Front Right: 2 [67%] [20.00dB]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'IEC958',1
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',2
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',3
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 127
  Front Left: Capture 127 [100%] [30.00dB] [on]
  Front Right: Capture 127 [100%] [30.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Enabled'
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'

As I said, the problem persists

seth

Member

Registered: 2012-09-03

Posts: 64,565

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

Did you plug and unplug the HPs w/ auto-mute enabled?

Is there a parallel windows?
Can you try to boot some live distro to see whether you get speaker sound there (or also only HPs)?

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

vCordero

Member

Registered: 2024-01-07

Posts: 22

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

Yes, I plugged and unplugged, but it doesn't work.

What do you mean with "parallel windows"? I do have a dual boot with Windows, but I made sure to run

powercfg /H off

on Windows before the installation. Btw, in Windows the audio works fine.

And could you explain me a bit what and how to install a live distro? Any links? Thank you!

seth

Member

Registered: 2012-09-03

Posts: 64,565

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

Btw, in Windows the audio works fine.

That answers one of the more important questions.
No make sure fast-start is still disabled, windows frequently re-enables it with updates.

And you generally don't install live-distros. That's the point - you boot them from a USB key
You could try the latest ubuntu or knoppix, grml, … there're countless.

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

vCordero

Member

Registered: 2024-01-07

Posts: 22

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

I checked, and yes, it's still disabled. I first disabled just fast-start, and later hibernation, but neither worked. It is still necessary to install the live distro? or the info about dual boot was enough?

Last edited by vCordero (2024-01-10 00:19:06)

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 24,479

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

You don't install a live distro, you start them and test them out without installing anything to check whether it's an Arch specific or a general linux problem.

vCordero

Member

Registered: 2024-01-07

Posts: 22

Re: [SOLVED] No audio output devices are detected with pulseaudio just Dum

I started Ubuntu in a USB and I didn't get any sound either, so I guess it is a Windows related issue. Hibernation and Fast-Start are off.

Last edited by vCordero (2024-01-12 02:41:39)