Microphone detected but not working on Pipewire

me0w · 2024-01-22 06:18:19

I am using Pipewire, Wayland on my system. My sound card is Realtek ALC897.

In pavucontrol, It shows "Front microphone(plugged in) but microphone does not work at all.
My system does not capture any sound from my microphone.

Also, lspci detects wrong sound card ALC1220, not my ALC897.

12:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD Audio Controller [1022:15e3]
	DeviceName: Realtek ALC1220
	Subsystem: Gigabyte Technology Co., Ltd Family 17h/19h HD Audio Controller [1458:a194]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

Output of "arecord -l"

**** List of CAPTURE Hardware Devices ****
card 2: Generic_1 [HD-Audio Generic], device 0: ALC897 Analog [ALC897 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

Output of "sudo fuser -v /dev/snd/*"

                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  meow       1615 F.... wireplumber
/dev/snd/controlC1:  meow       1615 F.... wireplumber
/dev/snd/controlC2:  meow       1614 F.... pipewire
                     meow       1615 F.... wireplumber
/dev/snd/pcmC2D0c:   meow       1614 F...m pipewire
/dev/snd/pcmC2D0p:   meow       1614 F...m pipewire
/dev/snd/seq:        meow       1614 F.... pipewire

Last edited by me0w (2024-01-24 01:50:00)

V1del · 2024-01-22 11:40:06

Please use code instead of quote for pasting outputs

Generally speaking it's the other way around, the kernel misdetects the codec and assigns a wrong/faulty codec. What makes you sure it's an ALC897 instead? Do you have a model configuration in /etc/modprobe.d for snd-hda-intel? Did this never work or happen recently? if this worked at some point, try removing ~/.local/state/wireplumber and restarting wireplumber/pipewire.

If that didn't help, without actively recording from wireplumber/pipewire (the fuser output should not show /dev/snd/pcmC2D0c occupied by anything) do you get a recording from

arecord -Dhw:2 test.wav

and which mixers do you have what's your output for

amixer -c2

Last edited by V1del (2024-01-22 11:40:29)

me0w · 2024-01-24 01:49:24

Thank you for your reply. I checked my mainboard's hardware specification and it says my sound card is ALC897. I don't have any model configuration of snd-hda-intel. Also, microphone never worked since fresh-install. I removed ~/.local/state/wireplumber and restarted services but this workaround didn't work for me.

I tried "arecord -f S16_LE -Dhw:2 test.wav" but,

arecord: set_params:1377: Channels count non available

This is output of "amixer -c2"

Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 87
  Mono: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 87 [100%] [0.00dB] [on]
  Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 24 [77%] [1.50dB] [off]
  Front Right: Playback 24 [77%] [1.50dB] [off]
Simple mixer control 'Front Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Line Out',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 87 [100%] [0.00dB] [on]
  Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 63
  Front Left: Capture 23 [37%] [0.00dB] [on]
  Front Right: Capture 23 [37%] [0.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
Simple mixer control 'Digital',0
  Capabilities: cvolume
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 120
  Front Left: Capture 120 [100%] [30.00dB]
  Front Right: Capture 120 [100%] [30.00dB]
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
Simple mixer control 'Rear Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Rear Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]

In pavucontrol, Both Input/Output devices' port is "Headphones (plugged in)"

V1del · 2024-01-24 11:11:40

Try the arecord command with

arecord -f S16_LE -Dhw:2 -c1 test.wav

But from the mixer the mic is muted, this could also be wrong profile selection in pipewire, try

amixer -c2  'Front Mic'.0 on,on

maybe also post

pactl list cards
pactl list sources

me0w · 2024-01-25 03:36:12

Thank you for your support again!

I did "arecord -f S16_LE -Dhw:2 -c1 test.wav" but It says

arecord: set_params:1377: Channels count non available

again.

Also, I tried "arecord -f S16_LE -Dhw:2 -c2 --duration=5 test.wav" and played wav file but no sound.

I unmuted 'Front Mic',0 but, this didn't solve problem. Instead, it makes white noise on my headphone.

this is the output of pactl list cards

Card #43
	Name: alsa_card.pci-0000_03_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HDA ATI HDMI at 0xf6c20000 irq 131"
		api.alsa.card.name = "HDA ATI HDMI"
		api.alsa.path = "hw:0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:03:00.1"
		device.description = "Navi 21/23 HDMI/DP Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_03_00.1"
		device.nick = "HDA ATI HDMI"
		device.plugged.usec = "17060409"
		device.product.id = "0xab28"
		device.product.name = "Navi 21/23 HDMI/DP Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "34"
		object.id = "43"
		object.serial = "43"
		object.path = "alsa:pcm:0"
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xf6c20000 irq 131"
		alsa.driver_name = "snd_hda_intel"
		device.string = "0"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		pro-audio: Pro Audio (sinks: 6, sources: 0, priority: 1, available: yes)
	Active Profile: off
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 1"
				device.icon_name = "video-display"
				card.profile.port = "0"
			Part of profile(s): output:hdmi-stereo
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 2"
				device.icon_name = "video-display"
				card.profile.port = "1"
			Part of profile(s): output:hdmi-stereo-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Part of profile(s): output:hdmi-stereo-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 4"
				device.icon_name = "video-display"
				card.profile.port = "3"
			Part of profile(s): output:hdmi-stereo-extra3
		hdmi-output-4: HDMI / DisplayPort 5 (type: HDMI, priority: 5500, latency offset: 0 usec, availability group: Legacy 5, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 5"
				device.icon_name = "video-display"
				card.profile.port = "4"
			Part of profile(s): output:hdmi-stereo-extra4
		hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, latency offset: 0 usec, availability group: Legacy 6, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 6"
				device.icon_name = "video-display"
				card.profile.port = "5"
			Part of profile(s): output:hdmi-stereo-extra5

Card #44
	Name: alsa_card.pci-0000_12_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "1"
		api.alsa.card.longname = "HD-Audio Generic at 0xf6688000 irq 133"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:1"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:12:00.1"
		device.description = "Rembrandt Radeon High Definition Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_12_00.1"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "17060432"
		device.product.id = "0x1640"
		device.product.name = "Rembrandt Radeon High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:12:00.1/sound/card1"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "34"
		object.id = "44"
		object.serial = "44"
		object.path = "alsa:pcm:1"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xf6688000 irq 133"
		alsa.driver_name = "snd_hda_intel"
		device.string = "1"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
	Active Profile: off
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 1"
				device.icon_name = "video-display"
				card.profile.port = "0"
			Part of profile(s): output:hdmi-stereo
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 2"
				device.icon_name = "video-display"
				card.profile.port = "1"
			Part of profile(s): output:hdmi-stereo-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Part of profile(s): output:hdmi-stereo-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 4"
				device.icon_name = "video-display"
				card.profile.port = "3"
			Part of profile(s): output:hdmi-stereo-extra3

Card #45
	Name: alsa_card.pci-0000_12_00.6
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "2"
		api.alsa.card.longname = "HD-Audio Generic at 0xf6680000 irq 134"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:12:00.6"
		device.description = "Family 17h/19h HD Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_12_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "17080761"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:12:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		media.class = "Audio/Device"
		factory.id = "14"
		client.id = "34"
		object.id = "45"
		object.serial = "45"
		object.path = "alsa:pcm:2"
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xf6680000 irq 134"
		alsa.driver_name = "snd_hda_intel"
		device.string = "2"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
		output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
		output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
		output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: yes)
		output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
		pro-audio: Pro Audio (sinks: 2, sources: 1, priority: 1, available: yes)
	Active Profile: output:analog-stereo+input:analog-stereo
	Ports:
		analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 1"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 2"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "1"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 3, available)
			Properties:
				port.type = "line"
				port.availability-group = "Legacy 3"
				card.profile.port = "2"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 4, available)
			Properties:
				port.type = "headphones"
				port.availability-group = "Legacy 4"
				device.icon_name = "audio-headphones"
				card.profile.port = "3"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "spdif"
				card.profile.port = "4"
			Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo

this is the output of pactl list sources

Source #50
	State: SUSPENDED
	Name: alsa_output.pci-0000_12_00.6.analog-stereo.monitor
	Description: Monitor of Family 17h/19h HD Audio Controller Analog Stereo
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_12_00.6.analog-stereo
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "ALC897 Analog"
		alsa.long_card_name = "HD-Audio Generic at 0xf6680000 irq 134"
		alsa.name = "ALC897 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		api.alsa.card.longname = "HD-Audio Generic at 0xf6680000 irq 134"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "front:2"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "4"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "45"
		device.profile.description = "Analog Stereo"
		device.profile.name = "analog-stereo"
		device.routes = "2"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Family 17h/19h HD Audio Controller"
		node.name = "alsa_output.pci-0000_12_00.6.analog-stereo"
		node.nick = "ALC897 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:pcm:2:front:2:playback"
		priority.driver = "1009"
		priority.session = "1009"
		factory.id = "18"
		clock.quantum-limit = "8192"
		client.id = "34"
		node.driver = "true"
		factory.mode = "merge"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "50"
		object.serial = "50"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		device.bus = "pci"
		device.bus_path = "pci-0000:12:00.6"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_12_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "17080761"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:12:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.string = "2"
	Ports:
		analog-output-lineout: Line Out (type: Line, priority: 9000, availability group: Legacy 3, available)
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability group: Legacy 4, available)
	Active Port: analog-output-headphones
	Formats:
		pcm

Source #51
	State: SUSPENDED
	Name: alsa_input.pci-0000_12_00.6.analog-stereo
	Description: Family 17h/19h HD Audio Controller Analog Stereo
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 20726 /  32% / -30.00 dB,   front-right: 20726 /  32% / -30.00 dB
	       balance 0.00
	Base Volume: 6554 /  10% / -60.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "ALC897 Analog"
		alsa.long_card_name = "HD-Audio Generic at 0xf6680000 irq 134"
		alsa.name = "ALC897 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		api.alsa.card.longname = "HD-Audio Generic at 0xf6680000 irq 134"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "front:2"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "capture"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "0"
		device.api = "alsa"
		device.class = "sound"
		device.id = "45"
		device.profile.description = "Analog Stereo"
		device.profile.name = "analog-stereo"
		device.routes = "2"
		factory.name = "api.alsa.pcm.source"
		media.class = "Audio/Source"
		device.description = "Family 17h/19h HD Audio Controller"
		node.name = "alsa_input.pci-0000_12_00.6.analog-stereo"
		node.nick = "ALC897 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:pcm:2:front:2:capture"
		priority.driver = "2009"
		priority.session = "2009"
		factory.id = "18"
		clock.quantum-limit = "8192"
		client.id = "34"
		node.driver = "true"
		factory.mode = "split"
		audio.adapt.follower = ""
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "51"
		object.serial = "51"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		device.bus = "pci"
		device.bus_path = "pci-0000:12:00.6"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_12_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "17080761"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:12:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.string = "2"
	Ports:
		analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, availability group: Legacy 1, available)
		analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, availability group: Legacy 2, not available)
	Active Port: analog-input-front-mic
	Formats:
		pcm

Thanks a million!

Arch Linux

#1 2024-01-22 06:18:19

Microphone detected but not working on Pipewire

#2 2024-01-22 11:40:06

Re: Microphone detected but not working on Pipewire

#3 2024-01-24 01:49:24

Re: Microphone detected but not working on Pipewire

#4 2024-01-24 11:11:40

Re: Microphone detected but not working on Pipewire

#5 2024-01-25 03:36:12

Re: Microphone detected but not working on Pipewire

Board footer