You are not logged in.

#1 2024-01-29 20:51:43

BotchedRPR
Member
Registered: 2024-01-29
Posts: 1

USB Headphones like to freeze up USB bus 2:2: cannot set freq

Hi
Recently ( NOT after a -Syu, NO kernel updates that seemingly caused it ) when I plug in my USB headphones on my PC they either work out of the box,
or they fully freeze up my entire USB bus on my PC and every program that tries to interact with it (i.e tee, bash when I try to write 1 to its disconnect sysfs node)
as well as fully locking my USB bus up (NO devices can get detected in this time)
The logs are:

[30761.102722] usb 1-3: new full-speed USB device number 47 using xhci_hcd
[30762.147291] usb 1-3: New USB device found, idVendor=1038, idProduct=12ec, bcdDevice= 0.67
[30762.147297] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[30762.147299] usb 1-3: Product: Arctis Nova 3
[30762.147301] usb 1-3: Manufacturer: SteelSeries
[30772.566528] usb 1-3: 2:2: cannot set freq 44100 to ep 0x2
[30787.923410] usb 1-3: 2:3: cannot set freq 48000 to ep 0x2
[30803.286932] usb 1-3: 2:4: cannot set freq 48000 to ep 0x2
[30813.523760] usb 1-3: 7:0: failed to get current value for ch 0 (-110)
[30823.763888] usb 1-3: 7:0: cannot get min/max values for control 2 (id 7)
[30828.883951] usb 1-3: 8:0: failed to get current value for ch 0 (-110)
[30839.124108] usb 1-3: 8:0: cannot get min/max values for control 2 (id 8)
[30885.208045] usbhid 1-3:1.3: can't add hid device: -110
[30885.271061] usbhid: probe of 1-3:1.3 failed with error -110
[30910.805052] usbhid 1-3:1.4: can't add hid device: -110

Only after that last usbhid can't add device my USB bus gets back up. I can either get them to work the first time, or try 5-10 times before they work once.
Has anyone ever seen this fault? Thanks!

Last edited by BotchedRPR (2024-01-29 20:52:38)

Offline

Board footer

Powered by FluxBB