You are not logged in.
- Topics: Active | Unanswered
#1 2024-01-31 18:27:22
- young_kaneda
- Member
- Registered: 2022-10-04
- Posts: 40
[SOLVED] xrandr showing only one resolution
I have a 16" legion 5 pro with the default resolution of
Screen 0: minimum 8 x 8, current 2560 x 1600, maximum 32767 x 32767
DP-0 disconnected primary (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-4 connected 2560x1600+0+0 (normal left inverted right x axis y axis) 345mm x 215mm
2560x1600 60.00*+ 240.00it doesnt show any other modes, unlike my nvidia-settings: https://imgur.com/a/HdfwEpN
thx in advance
Last edited by young_kaneda (2026-05-23 00:35:56)
Offline
#2 2024-01-31 19:12:28
- d.ALT
- Member
- Registered: 2019-05-10
- Posts: 959
Re: [SOLVED] xrandr showing only one resolution
Mmm... Seems there's something wrong with your dual-GPU setup...
Please post here output of
$ cat /var/log/Xorg.0.logand
# lspci -vnn<49,17,III,I> Fama di loro il mondo esser non lassa;
<50,17,III,I> misericordia e giustizia li sdegna:
<51,17,III,I> non ragioniam di lor, ma guarda e passa.
Offline
#3 2024-01-31 20:14:51
- young_kaneda
- Member
- Registered: 2022-10-04
- Posts: 40
Re: [SOLVED] xrandr showing only one resolution
d.ALT wrote:
Mmm... Seems there's something wrong with your dual-GPU setup...
Please post here output of$ cat /var/log/Xorg.0.logand
# lspci -vnn
xorg log:
[ 98.616]
X.Org X Server 1.21.1.10
X Protocol Version 11, Revision 0
[ 98.616] Current Operating System: Linux heaven 6.6.10-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 05 Jan 2024 16:20:41 +0000 x86_64
[ 98.616] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fcd330f6-a625-4816-81d1-ee8b7422a338 rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet nvidia-drm.modeset=1
[ 98.616]
[ 98.616] Current version of pixman: 0.43.0
[ 98.616] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 98.616] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 98.616] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 10 18:12:11 2024
[ 98.616] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 98.616] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 98.616] (==) No Layout section. Using the first Screen section.
[ 98.616] (==) No screen section available. Using defaults.
[ 98.616] (**) |-->Screen "Default Screen Section" (0)
[ 98.616] (**) | |-->Monitor "<default monitor>"
[ 98.616] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 98.616] (==) Automatically adding devices
[ 98.616] (==) Automatically enabling devices
[ 98.616] (==) Automatically adding GPU devices
[ 98.616] (==) Automatically binding GPU devices
[ 98.616] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 98.616] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 98.616] Entry deleted from font path.
[ 98.616] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 98.616] Entry deleted from font path.
[ 98.616] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 98.616] Entry deleted from font path.
[ 98.616] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 98.616] Entry deleted from font path.
[ 98.616] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 98.616] Entry deleted from font path.
[ 98.616] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 98.616] Entry deleted from font path.
[ 98.616] (==) FontPath set to:
[ 98.616] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 98.616] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 98.616] (II) Module ABI versions:
[ 98.616] X.Org ANSI C Emulation: 0.4
[ 98.616] X.Org Video Driver: 25.2
[ 98.616] X.Org XInput driver : 24.4
[ 98.616] X.Org Server Extension : 10.0
[ 98.679] (--) using VT number 2
[ 98.679] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 98.680] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 98.680] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 98.681] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 98.682] (--) PCI:*(1@0:0:0) 10de:2860:17aa:3b5a rev 161, Mem @ 0x82000000/16777216, 0x4000000000/8589934592, 0x4200000000/33554432, I/O @ 0x00006000/128, BIOS @ 0x????????/524288
[ 98.682] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 98.682] (II) LoadModule: "glx"
[ 98.682] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 98.683] (II) Module glx: vendor="X.Org Foundation"
[ 98.683] compiled for 1.21.1.10, module version = 1.0.0
[ 98.683] ABI class: X.Org Server Extension, version 10.0
[ 98.683] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 98.683] loading driver: nvidia
[ 98.683] (==) Matched nvidia as autoconfigured driver 0
[ 98.683] (==) Matched nouveau as autoconfigured driver 1
[ 98.683] (==) Matched nv as autoconfigured driver 2
[ 98.683] (==) Matched modesetting as autoconfigured driver 3
[ 98.683] (==) Matched fbdev as autoconfigured driver 4
[ 98.683] (==) Matched vesa as autoconfigured driver 5
[ 98.683] (==) Assigned the driver to the xf86ConfigLayout
[ 98.683] (II) LoadModule: "nvidia"
[ 98.683] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 98.683] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 98.683] compiled for 1.6.99.901, module version = 1.0.0
[ 98.683] Module class: X.Org Video Driver
[ 98.683] (II) LoadModule: "nouveau"
[ 98.683] (WW) Warning, couldn't open module nouveau
[ 98.683] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 98.683] (II) LoadModule: "nv"
[ 98.683] (WW) Warning, couldn't open module nv
[ 98.683] (EE) Failed to load module "nv" (module does not exist, 0)
[ 98.683] (II) LoadModule: "modesetting"
[ 98.683] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 98.684] (II) Module modesetting: vendor="X.Org Foundation"
[ 98.684] compiled for 1.21.1.10, module version = 1.21.1
[ 98.684] Module class: X.Org Video Driver
[ 98.684] ABI class: X.Org Video Driver, version 25.2
[ 98.684] (II) LoadModule: "fbdev"
[ 98.684] (WW) Warning, couldn't open module fbdev
[ 98.684] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 98.684] (II) LoadModule: "vesa"
[ 98.684] (WW) Warning, couldn't open module vesa
[ 98.684] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 98.684] (II) NVIDIA dlloader X Driver 545.29.06 Thu Nov 16 01:52:34 UTC 2023
[ 98.684] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 98.684] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 98.701] (II) Loading sub module "fb"
[ 98.701] (II) LoadModule: "fb"
[ 98.701] (II) Module "fb" already built-in
[ 98.701] (II) Loading sub module "wfb"
[ 98.701] (II) LoadModule: "wfb"
[ 98.701] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 98.702] (II) Module wfb: vendor="X.Org Foundation"
[ 98.702] compiled for 1.21.1.10, module version = 1.0.0
[ 98.702] ABI class: X.Org ANSI C Emulation, version 0.4
[ 98.703] (WW) Falling back to old probe method for modesetting
[ 98.703] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 98.703] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 98.703] (==) NVIDIA(0): RGB weight 888
[ 98.703] (==) NVIDIA(0): Default visual is TrueColor
[ 98.703] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 98.703] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 98.703] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 98.703] (**) NVIDIA(0): Enabling 2D acceleration
[ 98.703] (II) Loading sub module "glxserver_nvidia"
[ 98.703] (II) LoadModule: "glxserver_nvidia"
[ 98.703] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 98.740] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 98.740] compiled for 1.6.99.901, module version = 1.0.0
[ 98.740] Module class: X.Org Server Extension
[ 98.740] (II) NVIDIA GLX Module 545.29.06 Thu Nov 16 01:55:23 UTC 2023
[ 98.740] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 98.741] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 98.741] (--) NVIDIA(0): DFP-0
[ 98.741] (--) NVIDIA(0): DFP-1
[ 98.741] (--) NVIDIA(0): DFP-2
[ 98.741] (--) NVIDIA(0): DFP-3
[ 98.741] (--) NVIDIA(0): DFP-4
[ 98.741] (--) NVIDIA(0): DFP-5 (boot)
[ 98.745] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 4070 Laptop GPU (AD106-B) at
[ 98.745] (II) NVIDIA(0): PCI:1:0:0 (GPU-0)
[ 98.745] (--) NVIDIA(0): Memory: 8384512 kBytes
[ 98.745] (--) NVIDIA(0): VideoBIOS: 95.06.1e.00.98
[ 98.745] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[ 98.746] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 98.746] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 98.746] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 98.746] (--) NVIDIA(GPU-0):
[ 98.746] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 98.746] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 98.746] (--) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock
[ 98.746] (--) NVIDIA(GPU-0):
[ 98.746] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 98.746] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 98.746] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 98.746] (--) NVIDIA(GPU-0):
[ 98.746] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 98.746] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 98.746] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock
[ 98.746] (--) NVIDIA(GPU-0):
[ 98.747] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 98.747] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 98.747] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 98.747] (--) NVIDIA(GPU-0):
[ 98.748] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-5): connected
[ 98.748] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-5): Internal DisplayPort
[ 98.748] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-5): 2670.0 MHz maximum pixel clock
[ 98.748] (--) NVIDIA(GPU-0):
[ 98.753] (==) NVIDIA(0):
[ 98.753] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 98.753] (==) NVIDIA(0): will be used as the requested mode.
[ 98.753] (==) NVIDIA(0):
[ 98.755] (II) NVIDIA(0): Validated MetaModes:
[ 98.755] (II) NVIDIA(0): "DFP-5:nvidia-auto-select"
[ 98.755] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1600
[ 98.790] (--) NVIDIA(0): DPI set to (191, 184); computed from "UseEdidDpi" X config
[ 98.790] (--) NVIDIA(0): option
[ 98.790] (II) UnloadModule: "modesetting"
[ 98.790] (II) Unloading modesetting
[ 98.791] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 98.791] (II) NVIDIA: access.
[ 98.815] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 98.815] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 98.815] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 98.815] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 98.815] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 98.815] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 98.815] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 98.815] (II) NVIDIA(0): Config Options in the README.
[ 98.842] (II) NVIDIA(0): Setting mode "DFP-5:nvidia-auto-select"
[ 100.122] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 100.122] (==) NVIDIA(0): Backing store enabled
[ 100.122] (==) NVIDIA(0): Silken mouse enabled
[ 100.123] (==) NVIDIA(0): DPMS enabled
[ 100.123] (II) Loading sub module "dri2"
[ 100.123] (II) LoadModule: "dri2"
[ 100.123] (II) Module "dri2" already built-in
[ 100.123] (II) NVIDIA(0): [DRI2] Setup complete
[ 100.123] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 100.123] (II) Initializing extension Generic Event Extension
[ 100.123] (II) Initializing extension SHAPE
[ 100.123] (II) Initializing extension MIT-SHM
[ 100.123] (II) Initializing extension XInputExtension
[ 100.123] (II) Initializing extension XTEST
[ 100.123] (II) Initializing extension BIG-REQUESTS
[ 100.123] (II) Initializing extension SYNC
[ 100.123] (II) Initializing extension XKEYBOARD
[ 100.123] (II) Initializing extension XC-MISC
[ 100.123] (II) Initializing extension SECURITY
[ 100.123] (II) Initializing extension XFIXES
[ 100.123] (II) Initializing extension RENDER
[ 100.123] (II) Initializing extension RANDR
[ 100.123] (II) Initializing extension COMPOSITE
[ 100.123] (II) Initializing extension DAMAGE
[ 100.123] (II) Initializing extension MIT-SCREEN-SAVER
[ 100.123] (II) Initializing extension DOUBLE-BUFFER
[ 100.123] (II) Initializing extension RECORD
[ 100.124] (II) Initializing extension DPMS
[ 100.124] (II) Initializing extension Present
[ 100.124] (II) Initializing extension DRI3
[ 100.124] (II) Initializing extension X-Resource
[ 100.124] (II) Initializing extension XVideo
[ 100.124] (II) Initializing extension XVideo-MotionCompensation
[ 100.124] (II) Initializing extension GLX
[ 100.124] (II) Initializing extension GLX
[ 100.124] (II) Indirect GLX disabled.
[ 100.124] (II) GLX: Another vendor is already registered for screen 0
[ 100.124] (II) Initializing extension XFree86-VidModeExtension
[ 100.124] (II) Initializing extension XFree86-DGA
[ 100.124] (II) Initializing extension XFree86-DRI
[ 100.124] (II) Initializing extension DRI2
[ 100.124] (II) Initializing extension NV-GLX
[ 100.124] (II) Initializing extension NV-CONTROL
[ 100.124] (II) Initializing extension XINERAMA
[ 100.170] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 100.170] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 100.170] (**) Power Button: Applying InputClass "system-keyboard"
[ 100.170] (II) LoadModule: "libinput"
[ 100.170] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 100.171] (II) Module libinput: vendor="X.Org Foundation"
[ 100.171] compiled for 1.21.1.8, module version = 1.4.0
[ 100.171] Module class: X.Org XInput Driver
[ 100.171] ABI class: X.Org XInput driver, version 24.4
[ 100.171] (II) Using input driver 'libinput' for 'Power Button'
[ 100.171] (**) Power Button: always reports core events
[ 100.171] (**) Option "Device" "/dev/input/event2"
[ 100.173] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 100.173] (II) event2 - Power Button: device is a keyboard
[ 100.173] (II) event2 - Power Button: device removed
[ 100.207] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 100.207] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 100.207] (**) Option "xkb_model" "pc105+inet"
[ 100.207] (**) Option "xkb_layout" "us"
[ 100.207] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 100.228] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 100.229] (II) event2 - Power Button: device is a keyboard
[ 100.229] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 100.229] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 100.229] (**) Video Bus: Applying InputClass "system-keyboard"
[ 100.229] (II) Using input driver 'libinput' for 'Video Bus'
[ 100.229] (**) Video Bus: always reports core events
[ 100.229] (**) Option "Device" "/dev/input/event4"
[ 100.230] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 100.230] (II) event4 - Video Bus: device is a keyboard
[ 100.230] (II) event4 - Video Bus: device removed
[ 100.280] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4/event4"
[ 100.280] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 100.280] (**) Option "xkb_model" "pc105+inet"
[ 100.280] (**) Option "xkb_layout" "us"
[ 100.280] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 100.282] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 100.282] (II) event4 - Video Bus: device is a keyboard
[ 100.283] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 100.283] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 100.283] (**) Power Button: Applying InputClass "system-keyboard"
[ 100.283] (II) Using input driver 'libinput' for 'Power Button'
[ 100.283] (**) Power Button: always reports core events
[ 100.283] (**) Option "Device" "/dev/input/event1"
[ 100.284] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 100.284] (II) event1 - Power Button: device is a keyboard
[ 100.285] (II) event1 - Power Button: device removed
[ 100.306] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 100.306] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 100.306] (**) Option "xkb_model" "pc105+inet"
[ 100.306] (**) Option "xkb_layout" "us"
[ 100.306] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 100.308] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 100.308] (II) event1 - Power Button: device is a keyboard
[ 100.309] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 100.309] (II) No input driver specified, ignoring this device.
[ 100.309] (II) This device may have been added with another device file.
[ 100.310] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[ 100.310] (II) No input driver specified, ignoring this device.
[ 100.310] (II) This device may have been added with another device file.
[ 100.311] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[ 100.311] (II) No input driver specified, ignoring this device.
[ 100.311] (II) This device may have been added with another device file.
[ 100.311] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 100.311] (II) No input driver specified, ignoring this device.
[ 100.311] (II) This device may have been added with another device file.
[ 100.312] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 100.312] (II) No input driver specified, ignoring this device.
[ 100.312] (II) This device may have been added with another device file.
[ 100.312] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8295) Keyboard (/dev/input/event7)
[ 100.312] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: Applying InputClass "libinput keyboard catchall"
[ 100.312] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: Applying InputClass "system-keyboard"
[ 100.312] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8295) Keyboard'
[ 100.312] (**) ITE Tech. Inc. ITE Device(8295) Keyboard: always reports core events
[ 100.312] (**) Option "Device" "/dev/input/event7"
[ 100.314] (II) event7 - ITE Tech. Inc. ITE Device(8295) Keyboard: is tagged by udev as: Keyboard
[ 100.314] (II) event7 - ITE Tech. Inc. ITE Device(8295) Keyboard: device is a keyboard
[ 100.314] (II) event7 - ITE Tech. Inc. ITE Device(8295) Keyboard: device removed
[ 100.333] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:048D:C985.0002/input/input10/event7"
[ 100.333] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8295) Keyboard" (type: KEYBOARD, id 9)
[ 100.333] (**) Option "xkb_model" "pc105+inet"
[ 100.333] (**) Option "xkb_layout" "us"
[ 100.333] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 100.335] (II) event7 - ITE Tech. Inc. ITE Device(8295) Keyboard: is tagged by udev as: Keyboard
[ 100.335] (II) event7 - ITE Tech. Inc. ITE Device(8295) Keyboard: device is a keyboard
[ 100.337] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Keyboard (/dev/input/event10)
[ 100.337] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput keyboard catchall"
[ 100.337] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "system-keyboard"
[ 100.337] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Keyboard'
[ 100.337] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: always reports core events
[ 100.337] (**) Option "Device" "/dev/input/event10"
[ 100.338] (II) event10 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard
[ 100.338] (II) event10 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard
[ 100.339] (II) event10 - ITE Tech. Inc. ITE Device(8910) Keyboard: device removed
[ 100.360] (II) libinput: ITE Tech. Inc. ITE Device(8910) Keyboard: needs a virtual subdevice
[ 100.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:048D:C103.0004/input/input15/event10"
[ 100.360] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Keyboard" (type: MOUSE, id 10)
[ 100.360] (**) Option "AccelerationScheme" "none"
[ 100.360] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) selected scheme none/0
[ 100.360] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) acceleration factor: 2.000
[ 100.360] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) acceleration threshold: 4
[ 100.362] (II) event10 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard
[ 100.363] (II) event10 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard
[ 100.364] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Wireless Radio Control (/dev/input/event11)
[ 100.364] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 100.364] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "system-keyboard"
[ 100.364] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Wireless Radio Control'
[ 100.364] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: always reports core events
[ 100.364] (**) Option "Device" "/dev/input/event11"
[ 100.366] (II) event11 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: is tagged by udev as: Keyboard
[ 100.366] (II) event11 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device is a keyboard
[ 100.366] (II) event11 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device removed
[ 100.403] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:048D:C103.0004/input/input16/event11"
[ 100.403] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Wireless Radio Control" (type: KEYBOARD, id 11)
[ 100.403] (**) Option "xkb_model" "pc105+inet"
[ 100.403] (**) Option "xkb_layout" "us"
[ 100.403] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 100.406] (II) event11 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: is tagged by udev as: Keyboard
[ 100.406] (II) event11 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device is a keyboard
[ 100.407] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CEFE Mouse (/dev/input/event16)
[ 100.407] (**) SYNA2BA6:00 06CB:CEFE Mouse: Applying InputClass "libinput pointer catchall"
[ 100.407] (II) Using input driver 'libinput' for 'SYNA2BA6:00 06CB:CEFE Mouse'
[ 100.407] (**) SYNA2BA6:00 06CB:CEFE Mouse: always reports core events
[ 100.407] (**) Option "Device" "/dev/input/event16"
[ 100.409] (II) event16 - SYNA2BA6:00 06CB:CEFE Mouse: is tagged by udev as: Mouse Pointingstick
[ 100.409] (II) event16 - SYNA2BA6:00 06CB:CEFE Mouse: device is a pointer
[ 100.410] (II) event16 - SYNA2BA6:00 06CB:CEFE Mouse: device removed
[ 100.456] (II) libinput: SYNA2BA6:00 06CB:CEFE Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 100.456] (II) libinput: SYNA2BA6:00 06CB:CEFE Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 100.456] (II) libinput: SYNA2BA6:00 06CB:CEFE Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 100.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:19.1/i2c_designware.4/i2c-5/i2c-SYNA2BA6:00/0018:06CB:CEFE.0001/input/input19/event16"
[ 100.456] (II) XINPUT: Adding extended input device "SYNA2BA6:00 06CB:CEFE Mouse" (type: MOUSE, id 12)
[ 100.457] (**) Option "AccelerationScheme" "none"
[ 100.457] (**) SYNA2BA6:00 06CB:CEFE Mouse: (accel) selected scheme none/0
[ 100.457] (**) SYNA2BA6:00 06CB:CEFE Mouse: (accel) acceleration factor: 2.000
[ 100.457] (**) SYNA2BA6:00 06CB:CEFE Mouse: (accel) acceleration threshold: 4
[ 100.458] (II) event16 - SYNA2BA6:00 06CB:CEFE Mouse: is tagged by udev as: Mouse Pointingstick
[ 100.459] (II) event16 - SYNA2BA6:00 06CB:CEFE Mouse: device is a pointer
[ 100.461] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CEFE Mouse (/dev/input/mouse0)
[ 100.461] (II) No input driver specified, ignoring this device.
[ 100.461] (II) This device may have been added with another device file.
[ 100.462] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CEFE Touchpad (/dev/input/event17)
[ 100.462] (**) SYNA2BA6:00 06CB:CEFE Touchpad: Applying InputClass "libinput touchpad catchall"
[ 100.462] (**) SYNA2BA6:00 06CB:CEFE Touchpad: Applying InputClass "touchpad"
[ 100.462] (II) Using input driver 'libinput' for 'SYNA2BA6:00 06CB:CEFE Touchpad'
[ 100.462] (**) SYNA2BA6:00 06CB:CEFE Touchpad: always reports core events
[ 100.462] (**) Option "Device" "/dev/input/event17"
[ 100.463] (II) event17 - SYNA2BA6:00 06CB:CEFE Touchpad: is tagged by udev as: Touchpad
[ 100.466] (II) event17 - SYNA2BA6:00 06CB:CEFE Touchpad: device is a touchpad
[ 100.466] (II) event17 - SYNA2BA6:00 06CB:CEFE Touchpad: device removed
[ 100.500] (**) Option "Tapping" "True"
[ 100.500] (**) Option "TappingDrag" "True"
[ 100.500] (II) libinput: SYNA2BA6:00 06CB:CEFE Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 100.500] (II) libinput: SYNA2BA6:00 06CB:CEFE Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 100.500] (II) libinput: SYNA2BA6:00 06CB:CEFE Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 100.500] (**) Option "NaturalScrolling" "true"
[ 100.501] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:19.1/i2c_designware.4/i2c-5/i2c-SYNA2BA6:00/0018:06CB:CEFE.0001/input/input20/event17"
[ 100.501] (II) XINPUT: Adding extended input device "SYNA2BA6:00 06CB:CEFE Touchpad" (type: TOUCHPAD, id 13)
[ 100.504] (**) Option "AccelerationScheme" "none"
[ 100.504] (**) SYNA2BA6:00 06CB:CEFE Touchpad: (accel) selected scheme none/0
[ 100.504] (**) SYNA2BA6:00 06CB:CEFE Touchpad: (accel) acceleration factor: 2.000
[ 100.504] (**) SYNA2BA6:00 06CB:CEFE Touchpad: (accel) acceleration threshold: 4
[ 100.505] (II) event17 - SYNA2BA6:00 06CB:CEFE Touchpad: is tagged by udev as: Touchpad
[ 100.508] (II) event17 - SYNA2BA6:00 06CB:CEFE Touchpad: device is a touchpad
[ 100.509] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CEFE Touchpad (/dev/input/mouse1)
[ 100.509] (II) No input driver specified, ignoring this device.
[ 100.509] (II) This device may have been added with another device file.
[ 100.509] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event6)
[ 100.509] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 100.509] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[ 100.509] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 100.509] (**) Ideapad extra buttons: always reports core events
[ 100.509] (**) Option "Device" "/dev/input/event6"
[ 100.510] (II) event6 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 100.510] (II) event6 - Ideapad extra buttons: device is a keyboard
[ 100.510] (II) event6 - Ideapad extra buttons: device removed
[ 100.546] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6/event6"
[ 100.546] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 14)
[ 100.546] (**) Option "xkb_model" "pc105+inet"
[ 100.546] (**) Option "xkb_layout" "us"
[ 100.546] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 100.548] (II) event6 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 100.548] (II) event6 - Ideapad extra buttons: device is a keyboard
[ 100.549] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 100.549] (II) No input driver specified, ignoring this device.
[ 100.549] (II) This device may have been added with another device file.
[ 100.550] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 100.550] (II) No input driver specified, ignoring this device.
[ 100.550] (II) This device may have been added with another device file.
[ 100.550] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 100.550] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 100.550] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 100.550] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 100.550] (**) AT Translated Set 2 keyboard: always reports core events
[ 100.550] (**) Option "Device" "/dev/input/event3"
[ 100.551] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 100.551] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 100.553] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 100.586] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 100.587] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 100.587] (**) Option "xkb_model" "pc105+inet"
[ 100.587] (**) Option "xkb_layout" "us"
[ 100.587] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 100.588] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 100.588] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 100.590] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 100.590] (II) No input driver specified, ignoring this device.
[ 100.590] (II) This device may have been added with another device file.
[ 100.596] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput keyboard catchall"
[ 100.596] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "system-keyboard"
[ 100.596] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Keyboard'
[ 100.596] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: always reports core events
[ 100.596] (**) Option "Device" "/dev/input/event10"
[ 100.596] (II) libinput: ITE Tech. Inc. ITE Device(8910) Keyboard: is a virtual subdevice
[ 100.596] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:048D:C103.0004/input/input15/event10"
[ 100.596] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Keyboard" (type: KEYBOARD, id 16)
[ 100.596] (**) Option "xkb_model" "pc105+inet"
[ 100.596] (**) Option "xkb_layout" "us"
[ 100.596] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 111.600] (II) event2 - Power Button: device removed
[ 111.653] (II) event4 - Video Bus: device removed
[ 111.693] (II) event1 - Power Button: device removed
[ 111.713] (II) event7 - ITE Tech. Inc. ITE Device(8295) Keyboard: device removed
[ 111.730] (II) event11 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device removed
[ 111.763] (II) event16 - SYNA2BA6:00 06CB:CEFE Mouse: device removed
[ 111.796] (II) event17 - SYNA2BA6:00 06CB:CEFE Touchpad: device removed
[ 111.840] (II) event6 - Ideapad extra buttons: device removed
[ 111.873] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 111.890] (II) event10 - ITE Tech. Inc. ITE Device(8910) Keyboard: device removed
[ 111.920] (II) UnloadModule: "libinput"
[ 111.920] (II) UnloadModule: "libinput"
[ 111.920] (II) UnloadModule: "libinput"
[ 111.920] (II) UnloadModule: "libinput"
[ 111.920] (II) UnloadModule: "libinput"
[ 111.920] (II) UnloadModule: "libinput"
[ 111.920] (II) UnloadModule: "libinput"
[ 111.920] (II) UnloadModule: "libinput"
[ 111.920] (II) UnloadModule: "libinput"
[ 111.920] (II) UnloadModule: "libinput"
[ 111.921] (II) UnloadModule: "libinput"
[ 113.254] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 113.277] (II) Server terminated successfully (0). Closing log file.lspci:
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:a728] (rev 01)
Subsystem: Lenovo Device [17aa:3801]
Flags: bus master, fast devsel, latency 0
00:01.0 PCI bridge [0604]: Intel Corporation Device [8086:a70d] (rev 01) (prog-if 00 [Normal decode])
Subsystem: Lenovo Device [17aa:3805]
Flags: bus master, fast devsel, latency 0, IRQ 121
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 6000-6fff [size=4K] [16-bit]
Memory behind bridge: 82000000-830fffff [size=17M] [32-bit]
Prefetchable memory behind bridge: 4000000000-4201ffffff [size=8224M] [32-bit]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 Signal processing controller [1180]: Intel Corporation Raptor Lake Dynamic Platform and Thermal Framework Processor Participant [8086:a71d] (rev 01)
Subsystem: Lenovo Raptor Lake Dynamic Platform and Thermal Framework Processor Participant [17aa:3807]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at 4204100000 (64-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal_pci
Kernel modules: processor_thermal_device_pci
00:06.0 PCI bridge [0604]: Intel Corporation Raptor Lake PCIe 4.0 Graphics Port [8086:a74d] (rev 01) (prog-if 00 [Normal decode])
Subsystem: Lenovo Raptor Lake PCIe 4.0 Graphics Port [17aa:3808]
Flags: bus master, fast devsel, latency 0, IRQ 122
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 83300000-833fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 Signal processing controller [1180]: Intel Corporation Raptor Lake Crashlog and Telemetry [8086:a77d] (rev 01)
Subsystem: Lenovo Raptor Lake Crashlog and Telemetry [17aa:380a]
Flags: fast devsel
Memory at 4204120000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: intel_vsec
Kernel modules: intel_vsec
00:14.0 USB controller [0c03]: Intel Corporation Device [8086:7a60] (rev 11) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:3813]
Flags: bus master, medium devsel, latency 0, IRQ 127
Memory at 83480000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: mei_me, xhci_pci
00:14.2 RAM memory [0500]: Intel Corporation Device [8086:7a27] (rev 11)
Subsystem: Lenovo Device [17aa:3815]
Flags: fast devsel
Memory at 4204138000 (64-bit, non-prefetchable) [disabled] [size=16K]
Memory at 4204143000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
00:14.3 Network controller [0280]: Intel Corporation Device [8086:7a70] (rev 11)
Subsystem: Intel Corporation Device [8086:0094]
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at 4204134000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
00:15.0 Serial bus controller [0c80]: Intel Corporation Device [8086:7a4c] (rev 11)
Subsystem: Lenovo Device [17aa:3816]
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at 4204128000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Serial bus controller [0c80]: Intel Corporation Device [8086:7a4d] (rev 11)
Subsystem: Lenovo Device [17aa:3817]
Flags: bus master, fast devsel, latency 0, IRQ 40
Memory at 4204129000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.2 Serial bus controller [0c80]: Intel Corporation Device [8086:7a4e] (rev 11)
Subsystem: Lenovo Device [17aa:3818]
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at 420412a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Device [8086:7a68] (rev 11)
Subsystem: Lenovo Device [17aa:381a]
Flags: bus master, fast devsel, latency 0, IRQ 128
Memory at 420413f000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Serial bus controller [0c80]: Intel Corporation Device [8086:7a7c] (rev 11)
Subsystem: Lenovo Device [17aa:3820]
Flags: bus master, fast devsel, latency 0, IRQ 31
Memory at 420412b000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:19.1 Serial bus controller [0c80]: Intel Corporation Device [8086:7a7d] (rev 11)
Subsystem: Lenovo Device [17aa:3821]
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at 420412c000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:1b.0 PCI bridge [0604]: Intel Corporation Device [8086:7a40] (rev 11) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 123
Bus: primary=00, secondary=03, subordinate=07, sec-latency=0
I/O behind bridge: 5000-5fff [size=4K] [16-bit]
Memory behind bridge: 81000000-81ffffff [size=16M] [32-bit]
Prefetchable memory behind bridge: 4202000000-4202ffffff [size=16M] [32-bit]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.5 PCI bridge [0604]: Intel Corporation Device [8086:7a45] (rev 11) (prog-if 00 [Normal decode])
Subsystem: Lenovo Device [17aa:382c]
Flags: bus master, fast devsel, latency 0, IRQ 124
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 4000-4fff [size=4K] [16-bit]
Memory behind bridge: 83200000-832fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation Device [8086:7a30] (rev 11) (prog-if 00 [Normal decode])
Subsystem: Lenovo Device [17aa:3837]
Flags: bus master, fast devsel, latency 0, IRQ 125
Bus: primary=00, secondary=09, subordinate=0d, sec-latency=0
I/O behind bridge: 3000-3fff [size=4K] [16-bit]
Memory behind bridge: 80000000-80ffffff [size=16M] [32-bit]
Prefetchable memory behind bridge: 4203000000-4203ffffff [size=16M] [32-bit]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.4 PCI bridge [0604]: Intel Corporation Device [8086:7a34] (rev 11) (prog-if 00 [Normal decode])
Subsystem: Lenovo Device [17aa:383b]
Flags: bus master, fast devsel, latency 0, IRQ 126
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 83100000-831fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:7a0c] (rev 11)
Subsystem: Lenovo Device [17aa:3843]
Flags: bus master, fast devsel, latency 0
00:1f.3 Audio device [0403]: Intel Corporation Device [8086:7a50] (rev 11) (prog-if 80)
Subsystem: Lenovo Device [17aa:3846]
Flags: bus master, fast devsel, latency 32, IRQ 129
Memory at 4204130000 (64-bit, non-prefetchable) [size=16K]
Memory at 4204000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_sof_pci_intel_tgl
00:1f.4 SMBus [0c05]: Intel Corporation Device [8086:7a23] (rev 11)
Subsystem: Lenovo Device [17aa:3847]
Flags: medium devsel, IRQ 18
Memory at 420413c000 (64-bit, non-prefetchable) [size=256]
I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Serial bus controller [0c80]: Intel Corporation Device [8086:7a24] (rev 11)
Subsystem: Lenovo Device [17aa:3848]
Flags: fast devsel
Memory at 83400000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: intel-spi
Kernel modules: spi_intel_pci
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation AD106M [GeForce RTX 4070 Max-Q / Mobile] [10de:2860] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo AD106M [GeForce RTX 4070 Max-Q / Mobile] [17aa:3b5a]
Flags: bus master, fast devsel, latency 0, IRQ 198
Memory at 82000000 (32-bit, non-prefetchable) [size=16M]
Memory at 4000000000 (64-bit, prefetchable) [size=8G]
Memory at 4200000000 (64-bit, prefetchable) [size=32M]
I/O ports at 6000 [size=128]
Expansion ROM at 83080000 [virtual] [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia_drm, nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:22bd] (rev a1)
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at 83000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 Non-Volatile memory controller [0108]: SK hynix Platinum P41/PC801 NVMe Solid State Drive [1c5c:1959] (prog-if 02 [NVM Express])
Subsystem: SK hynix Platinum P41/PC801 NVMe Solid State Drive [1c5c:1959]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at 83300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [17aa:3948]
Flags: bus master, fast devsel, latency 0, IRQ 17
I/O ports at 4000 [size=256]
Memory at 83204000 (64-bit, non-prefetchable) [size=4K]
Memory at 83200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
0e:00.0 Non-Volatile memory controller [0108]: SK hynix Platinum P41/PC801 NVMe Solid State Drive [1c5c:1959] (prog-if 02 [NVM Express])
Subsystem: SK hynix Platinum P41/PC801 NVMe Solid State Drive [1c5c:1959]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at 83100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvmeOffline
#4 2024-01-31 20:20:30
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,034
Re: [SOLVED] xrandr showing only one resolution
The nvidia driver offers you to set a resolution you can get through "xrandr --output DP-4 --scale <x> <y>"
The 2560x1600 is the only actually physical mode.
Still post your xorg log, yes.
Its location depends on how you start X11: https://wiki.archlinux.org/title/Xorg#General
Last edited by seth (2024-01-31 20:22:06)
Offline
#5 2024-01-31 20:37:46
- young_kaneda
- Member
- Registered: 2022-10-04
- Posts: 40
Re: [SOLVED] xrandr showing only one resolution
seth wrote:
The nvidia driver offers you to set a resolution you can get through "xrandr --output DP-4 --scale <x> <y>"
The 2560x1600 is the only actually physical mode.Still post your xorg log, yes.
Its location depends on how you start X11: https://wiki.archlinux.org/title/Xorg#General
So you are saying that the others resolutions are not natively supported (without scaling) just the 2560x1600?
I tried
xrandr --output DP-4 --scale 1920x1200but got a
xrandr: Configure crtc 0 failedOffline
#6 2024-01-31 20:40:08
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,034
Re: [SOLVED] xrandr showing only one resolution
That's not how the scale parameter works, you pass one or two factors
xrandr --output DP-4 --scale 0.75Offline
#7 2024-01-31 21:22:54
- young_kaneda
- Member
- Registered: 2022-10-04
- Posts: 40
Re: [SOLVED] xrandr showing only one resolution
oh okay but i think you did not got what i meant, so my monitor does not support others resolutions WITHOUT scaling? Like my older laptop where xrandr shows other modes available
Offline
#8 2024-01-31 21:31:28
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,034
Re: [SOLVED] xrandr showing only one resolution
Apparently not.
for OUT in /sys/class/drm/card0*; do echo $OUT; edid-decode $OUT/edid; echo "================="; doneYou'll need https://aur.archlinux.org/packages/edid-decode-git
You can add modelines to the server (but will also have to convince the nvidia driver to accept them)
Why is this a topic?
Ie. what's your actual concern here?
Offline
#9 2024-01-31 22:52:53
- young_kaneda
- Member
- Registered: 2022-10-04
- Posts: 40
Re: [SOLVED] xrandr showing only one resolution
seth wrote:
Apparently not.
for OUT in /sys/class/drm/card0*; do echo $OUT; edid-decode $OUT/edid; echo "================="; doneYou'll need https://aur.archlinux.org/packages/edid-decode-git
You can add modelines to the server (but will also have to convince the nvidia driver to accept them)
Why is this a topic?
Ie. what's your actual concern here?
Well i'm not used to HiDPI monitors, and i was used to the normal 1920x1080 resolution, but now everything looks smaller than usual, like if I access the devtools of the browser, the UI of the browser is ok bc it follows my lxappearence but the devtool font is too small, not only this but here and there if something is fine with a config of font/size, there somehting there will be different or too small bc of the big resolution of my screen, so i thought with myself maybe using it on a 1920 resolution would fix, actually i can change the DPI but even a small change like from 96 to 120 (125% i guess) its already TOO big
Offline
#10 2024-01-31 23:00:41
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 76,034
Re: [SOLVED] xrandr showing only one resolution
https://wiki.archlinux.org/title/Hidpi
The output is ~190dpi, a sane™ normal font size is 8pt - 12 pt
Offline