You are not logged in.

#1 2024-02-18 15:33:08

Enrico1989
Member
Registered: 2018-07-05
Posts: 229

Speaker not available upon reboot, but only after wakeup from sleep

Right after booting if I try

pacmd list-sources

I get

No PulseAudio daemon running, or not running as session daemon.

I guess that's expected, no?

Anyway, upon opening Pavucontrol, I get

9 source(s) available.
    index: 0
	name: <alsa_input.usb-Microsoft_Microsoft___LifeCam_Cinema_TM_-02.mono-fallback>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9040
	volume: mono: 46260 /  71% / -9.08 dB
	        balance 0.00
	base volume: 16462 /  25% / -36.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.60 ms
	max rewind: 0 KiB
	sample spec: s16le 1ch 48000Hz
	channel map: mono
	             Mono
	used by: 0
	linked by: 0
	configured latency: 2000.00 ms; range is 1.00 .. 2000.00 ms
	card: 0 <alsa_card.usb-Microsoft_Microsoft___LifeCam_Cinema_TM_-02>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "Microsoft® LifeCam Cinema(TM)"
		alsa.long_card_name = "Microsoft Microsoft® LifeCam Cinema(TM) at usb-0000:00:14.0-1, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:1:1.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/sound/card0"
		udev.id = "usb-Microsoft_Microsoft®_LifeCam_Cinema_TM_-02"
		device.bus = "usb"
		device.vendor.id = "045e"
		device.vendor.name = "Microsoft Corp."
		device.product.id = "0812"
		device.product.name = "Microsoft® LifeCam Cinema(TM)"
		device.serial = "Microsoft_Microsoft®_LifeCam_Cinema_TM_"
		device.form_factor = "webcam"
		device.string = "hw:0"
		device.buffering.buffer_size = "192000"
		device.buffering.fragment_size = "96000"
		device.access_mode = "mmap+timer"
		device.profile.name = "mono-fallback"
		device.profile.description = "Mono"
		device.description = "Microsoft® LifeCam Cinema(TM) Mono"
		module-udev-detect.discovered = "1"
		device.icon_name = "camera-web-usb"
	ports:
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-mic>
    index: 1
	name: <alsa_output.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 1040
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 344 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 2000.00 ms; range is 0.50 .. 2000.00 ms
	monitor_of: 0
	card: 1 <alsa_card.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00>
	module: 7
	properties:
		device.description = "Monitor of Plantronics Blackwire 3225 Series Analog Stereo"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "Plantronics Blackwire 3225 Seri"
		alsa.long_card_name = "Plantronics Plantronics Blackwire 3225 Seri at usb-0000:00:14.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/sound/card1"
		udev.id = "usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00"
		device.bus = "usb"
		device.vendor.id = "047f"
		device.vendor.name = "Plantronics, Inc."
		device.product.id = "c058"
		device.product.name = "Plantronics Blackwire 3225 Series"
		device.serial = "Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
  * index: 2
	name: <alsa_input.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9049
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 54094 /  83% / -5.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.38 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 2000.00 ms; range is 1.00 .. 2000.00 ms
	card: 1 <alsa_card.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "Plantronics Blackwire 3225 Seri"
		alsa.long_card_name = "Plantronics Plantronics Blackwire 3225 Seri at usb-0000:00:14.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/sound/card1"
		udev.id = "usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00"
		device.bus = "usb"
		device.vendor.id = "047f"
		device.vendor.name = "Plantronics, Inc."
		device.product.id = "c058"
		device.product.name = "Plantronics Blackwire 3225 Series"
		device.serial = "Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Plantronics Blackwire 3225 Series Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	ports:
		analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-headset-mic>
    index: 3
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI3__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 64 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 341.33 ms; range is 0.50 .. 341.33 ms
	monitor_of: 1
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS HDMI / DisplayPort 3 Output"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 4
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI2__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 64 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 341.33 ms; range is 0.50 .. 341.33 ms
	monitor_of: 2
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS HDMI / DisplayPort 2 Output"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 5
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI1__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 64 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 341.33 ms; range is 0.50 .. 341.33 ms
	monitor_of: 3
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS HDMI / DisplayPort 1 Output"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 6
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Headphones__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 64 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 341.33 ms; range is 0.50 .. 341.33 ms
	monitor_of: 4
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS Headphones"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 7
	name: <alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Headset__source>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9033
	volume: front-left: 65540 / 100% / 0.00 dB,   front-right: 65540 / 100% / 0.00 dB
	        balance 0.00
	base volume: 6554 /  10% / -60.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 341.33 ms; range is 1.00 .. 341.33 ms
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = ""
		alsa.id = "HDA Analog (*)"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "_ucm0005.hw:sofhdadsp"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "16384"
		device.access_mode = "mmap+timer"
		device.profile.name = "HiFi: Headset: source"
		device.profile.description = "Headset Mono Microphone"
		alsa.mixer_device = "_ucm0005.hw:sofhdadsp"
		device.description = "Comet Lake PCH-LP cAVS Headset Mono Microphone"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		[In] Headset: Headset Mono Microphone (priority 300, latency offset 0 usec, available: no)
			properties:
				
	active port: <[In] Headset>
    index: 8
	name: <alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Mic1__source>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9031
	volume: front-left: 34695 /  53% / -16.57 dB,   front-right: 34695 /  53% / -16.57 dB
	        balance 0.00
	base volume: 30419 /  46% / -20.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.23 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 341.33 ms; range is 1.00 .. 341.33 ms
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = ""
		alsa.id = "DMIC (*)"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "6"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "_ucm0005.hw:sofhdadsp,6"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "16384"
		device.access_mode = "mmap+timer"
		device.profile.name = "HiFi: Mic1: source"
		device.profile.description = "Digital Microphone"
		alsa.mixer_device = "_ucm0005.hw:sofhdadsp"
		device.description = "Comet Lake PCH-LP cAVS Digital Microphone"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		[In] Mic1: Digital Microphone (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <[In] Mic1>

Then if I open, say, a browser on YouTube and play some video, I get

9 source(s) available.
    index: 0
	name: <alsa_input.usb-Microsoft_Microsoft___LifeCam_Cinema_TM_-02.mono-fallback>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9040
	volume: mono: 46260 /  71% / -9.08 dB
	        balance 0.00
	base volume: 16462 /  25% / -36.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 1ch 48000Hz
	channel map: mono
	             Mono
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 1.00 .. 2000.00 ms
	card: 0 <alsa_card.usb-Microsoft_Microsoft___LifeCam_Cinema_TM_-02>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "Microsoft® LifeCam Cinema(TM)"
		alsa.long_card_name = "Microsoft Microsoft® LifeCam Cinema(TM) at usb-0000:00:14.0-1, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:1:1.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/sound/card0"
		udev.id = "usb-Microsoft_Microsoft®_LifeCam_Cinema_TM_-02"
		device.bus = "usb"
		device.vendor.id = "045e"
		device.vendor.name = "Microsoft Corp."
		device.product.id = "0812"
		device.product.name = "Microsoft® LifeCam Cinema(TM)"
		device.serial = "Microsoft_Microsoft®_LifeCam_Cinema_TM_"
		device.form_factor = "webcam"
		device.string = "hw:0"
		device.buffering.buffer_size = "192000"
		device.buffering.fragment_size = "96000"
		device.access_mode = "mmap+timer"
		device.profile.name = "mono-fallback"
		device.profile.description = "Mono"
		device.description = "Microsoft® LifeCam Cinema(TM) Mono"
		module-udev-detect.discovered = "1"
		device.icon_name = "camera-web-usb"
	ports:
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-mic>
    index: 1
	name: <alsa_output.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 1040
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 4 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 2000.00 ms; range is 0.50 .. 2000.00 ms
	monitor_of: 0
	card: 1 <alsa_card.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00>
	module: 7
	properties:
		device.description = "Monitor of Plantronics Blackwire 3225 Series Analog Stereo"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "Plantronics Blackwire 3225 Seri"
		alsa.long_card_name = "Plantronics Plantronics Blackwire 3225 Seri at usb-0000:00:14.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/sound/card1"
		udev.id = "usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00"
		device.bus = "usb"
		device.vendor.id = "047f"
		device.vendor.name = "Plantronics, Inc."
		device.product.id = "c058"
		device.product.name = "Plantronics Blackwire 3225 Series"
		device.serial = "Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
  * index: 2
	name: <alsa_input.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9049
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 54094 /  83% / -5.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 1.00 .. 2000.00 ms
	card: 1 <alsa_card.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "Plantronics Blackwire 3225 Seri"
		alsa.long_card_name = "Plantronics Plantronics Blackwire 3225 Seri at usb-0000:00:14.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/sound/card1"
		udev.id = "usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00"
		device.bus = "usb"
		device.vendor.id = "047f"
		device.vendor.name = "Plantronics, Inc."
		device.product.id = "c058"
		device.product.name = "Plantronics Blackwire 3225 Series"
		device.serial = "Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Plantronics Blackwire 3225 Series Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	ports:
		analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-headset-mic>
    index: 3
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI3__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 341.33 ms
	monitor_of: 1
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS HDMI / DisplayPort 3 Output"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 4
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI2__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 341.33 ms
	monitor_of: 2
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS HDMI / DisplayPort 2 Output"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 5
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI1__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 341.33 ms
	monitor_of: 3
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS HDMI / DisplayPort 1 Output"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 6
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Headphones__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 341.33 ms
	monitor_of: 4
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS Headphones"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 7
	name: <alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Headset__source>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9033
	volume: front-left: 65540 / 100% / 0.00 dB,   front-right: 65540 / 100% / 0.00 dB
	        balance 0.00
	base volume: 6554 /  10% / -60.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 1.00 .. 341.33 ms
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = ""
		alsa.id = "HDA Analog (*)"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "_ucm0005.hw:sofhdadsp"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "16384"
		device.access_mode = "mmap+timer"
		device.profile.name = "HiFi: Headset: source"
		device.profile.description = "Headset Mono Microphone"
		alsa.mixer_device = "_ucm0005.hw:sofhdadsp"
		device.description = "Comet Lake PCH-LP cAVS Headset Mono Microphone"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		[In] Headset: Headset Mono Microphone (priority 300, latency offset 0 usec, available: no)
			properties:
				
	active port: <[In] Headset>
    index: 8
	name: <alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Mic1__source>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9031
	volume: front-left: 34695 /  53% / -16.57 dB,   front-right: 34695 /  53% / -16.57 dB
	        balance 0.00
	base volume: 30419 /  46% / -20.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 1.00 .. 341.33 ms
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = ""
		alsa.id = "DMIC (*)"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "6"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "_ucm0005.hw:sofhdadsp,6"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "16384"
		device.access_mode = "mmap+timer"
		device.profile.name = "HiFi: Mic1: source"
		device.profile.description = "Digital Microphone"
		alsa.mixer_device = "_ucm0005.hw:sofhdadsp"
		device.description = "Comet Lake PCH-LP cAVS Digital Microphone"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		[In] Mic1: Digital Microphone (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <[In] Mic1>

and the audio coming from my headphones. Pavucontrol shows this https://photos.app.goo.gl/L8bAm99uP8t4wmyt8 and I see no way to select the speaker.

Then I just put the system to sleep (via systemclt suspend) and wake it up, I get

9 source(s) available.
    index: 0
	name: <alsa_input.usb-Microsoft_Microsoft___LifeCam_Cinema_TM_-02.mono-fallback>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9040
	volume: mono: 46260 /  71% / -9.08 dB
	        balance 0.00
	base volume: 16462 /  25% / -36.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 1ch 48000Hz
	channel map: mono
	             Mono
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 0 <alsa_card.usb-Microsoft_Microsoft___LifeCam_Cinema_TM_-02>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "Microsoft® LifeCam Cinema(TM)"
		alsa.long_card_name = "Microsoft Microsoft® LifeCam Cinema(TM) at usb-0000:00:14.0-1, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:1:1.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/sound/card0"
		udev.id = "usb-Microsoft_Microsoft®_LifeCam_Cinema_TM_-02"
		device.bus = "usb"
		device.vendor.id = "045e"
		device.vendor.name = "Microsoft Corp."
		device.product.id = "0812"
		device.product.name = "Microsoft® LifeCam Cinema(TM)"
		device.serial = "Microsoft_Microsoft®_LifeCam_Cinema_TM_"
		device.form_factor = "webcam"
		device.string = "hw:0"
		device.buffering.buffer_size = "192000"
		device.buffering.fragment_size = "96000"
		device.access_mode = "mmap+timer"
		device.profile.name = "mono-fallback"
		device.profile.description = "Mono"
		device.description = "Microsoft® LifeCam Cinema(TM) Mono"
		module-udev-detect.discovered = "1"
		device.icon_name = "camera-web-usb"
	ports:
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-mic>
    index: 1
	name: <alsa_output.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1040
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	monitor_of: 0
	card: 1 <alsa_card.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00>
	module: 7
	properties:
		device.description = "Monitor of Plantronics Blackwire 3225 Series Analog Stereo"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "Plantronics Blackwire 3225 Seri"
		alsa.long_card_name = "Plantronics Plantronics Blackwire 3225 Seri at usb-0000:00:14.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/sound/card1"
		udev.id = "usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00"
		device.bus = "usb"
		device.vendor.id = "047f"
		device.vendor.name = "Plantronics, Inc."
		device.product.id = "c058"
		device.product.name = "Plantronics Blackwire 3225 Series"
		device.serial = "Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
  * index: 2
	name: <alsa_input.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9049
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 54094 /  83% / -5.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 1 <alsa_card.usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "Plantronics Blackwire 3225 Seri"
		alsa.long_card_name = "Plantronics Plantronics Blackwire 3225 Seri at usb-0000:00:14.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/sound/card1"
		udev.id = "usb-Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529-00"
		device.bus = "usb"
		device.vendor.id = "047f"
		device.vendor.name = "Plantronics, Inc."
		device.product.id = "c058"
		device.product.name = "Plantronics Blackwire 3225 Series"
		device.serial = "Plantronics_Plantronics_Blackwire_3225_Series_883AAE5C77074F1683F212F2C502B529"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Plantronics Blackwire 3225 Series Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	ports:
		analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-headset-mic>
    index: 3
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI3__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 341.33 ms
	monitor_of: 1
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS HDMI / DisplayPort 3 Output"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 4
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI2__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 341.33 ms
	monitor_of: 2
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS HDMI / DisplayPort 2 Output"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 5
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI1__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 341.33 ms
	monitor_of: 3
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS HDMI / DisplayPort 1 Output"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 7
	name: <alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Headset__source>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9033
	volume: front-left: 65540 / 100% / 0.00 dB,   front-right: 65540 / 100% / 0.00 dB
	        balance 0.00
	base volume: 6554 /  10% / -60.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 341.33 ms
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = ""
		alsa.id = "HDA Analog (*)"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "_ucm0005.hw:sofhdadsp"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "16384"
		device.access_mode = "mmap+timer"
		device.profile.name = "HiFi: Headset: source"
		device.profile.description = "Headset Mono Microphone"
		alsa.mixer_device = "_ucm0005.hw:sofhdadsp"
		device.description = "Comet Lake PCH-LP cAVS Headset Mono Microphone"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		[In] Headset: Headset Mono Microphone (priority 300, latency offset 0 usec, available: no)
			properties:
				
	active port: <[In] Headset>
    index: 8
	name: <alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Mic1__source>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9031
	volume: front-left: 34695 /  53% / -16.57 dB,   front-right: 34695 /  53% / -16.57 dB
	        balance 0.00
	base volume: 30419 /  46% / -20.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 341.33 ms
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = ""
		alsa.id = "DMIC (*)"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "6"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "_ucm0005.hw:sofhdadsp,6"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "16384"
		device.access_mode = "mmap+timer"
		device.profile.name = "HiFi: Mic1: source"
		device.profile.description = "Digital Microphone"
		alsa.mixer_device = "_ucm0005.hw:sofhdadsp"
		device.description = "Comet Lake PCH-LP cAVS Digital Microphone"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		[In] Mic1: Digital Microphone (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <[In] Mic1>
    index: 9
	name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Speaker__sink.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 1030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 4 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 341.33 ms; range is 0.50 .. 341.33 ms
	monitor_of: 5
	card: 2 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
	module: 8
	properties:
		device.description = "Monitor of Comet Lake PCH-LP cAVS Speaker"
		device.class = "monitor"
		alsa.card = "2"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "DellInc.-Vostro5590--0RN4TP"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "02c8"
		device.product.name = "Comet Lake PCH-LP cAVS"
		device.string = "2"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"

with the audio coming from the speaker. Now Pavucontrol shows this https://photos.app.goo.gl/Yyw6rTczn4ceP63QA so I can select the headphones again, if I wanted.

Offline

Board footer

Powered by FluxBB