3 drives no longer detected after system update

kd0bpv · 2024-03-06 15:34:01

A few days ago, I ran system updates, and ever since, my ZFS pool has been down because 3 of the 4 drives in it aren't detected by the kernel. These 4 drives are all the exact same model and advertised capacities, all purchased at the same time, even their serials exhibit this. They are all connected to the same controller card. They are ALL detected by BIOS/UEFI. They're all detected by live environments from other distros. I'll be trying the latest Arch boot medium while I wait for a reply. Because of my troubleshooting so far, I can confidently say several things:

This is NOT a hardware issue. All the hardware is working. Power supply, PCI bus, controller, SATA cables, drives, etc.
This is not a BIOS/UEFI issue. The firmware and other distros are correctly detecting the drives.
The Linux kernel is not missing a module for the controller. It is listed by lspci
The kernel is not missing a module for the drives. One of them and it's partitions are still being detected and enumerated under /dev/disk/by-id/.
Whatever changed, it's affecting core/linux-lts too, as that kernel exhibits the exact same problem set.
This is not an issue with OpenZFS itself. It is installed, and working without internal errors. It's just what alerted me to the problem.

I'm not catching anything in dmesg that sheds any light on what's happening, but maybe someone else will.

[    0.000000] Linux version 6.7.8-arch1-1 (linux@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Sun, 03 Mar 2024 00:30:36 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e7bc9921-8e1e-492d-a35e-2b457ef3d91e rw loglevel=3 quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000060000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008caa5fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008caa6000-0x000000008e311fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008e312000-0x000000008e580fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008e581000-0x000000008e9b6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008e9b7000-0x000000008f34bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008f34c000-0x000000008f40efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008f40f000-0x000000008f40ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008f410000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] efi: EFI v2.7 by American Megatrends
[    0.000000] efi: ACPI 2.0=0x8e51d000 ACPI=0x8e51d000 SMBIOS=0x8f1a2000 SMBIOS 3.0=0x8f1a1000 MEMATTR=0x88706018 ESRT=0x8a0b6718
[    0.000000] efi: Remove mem42: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[    0.000000] efi: Not removing mem43: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem44: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem45: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map
[    0.000000] efi: Not removing mem46: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem47: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 3.2.1 present.
[    0.000000] DMI: System manufacturer System Product Name/PRIME Z390-P, BIOS 2808 05/27/2020
[    0.000000] tsc: Detected 2900.000 MHz processor
[    0.000000] tsc: Detected 2899.886 MHz TSC
[    0.000669] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000672] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000679] last_pfn = 0x86e000 max_arch_pfn = 0x400000000
[    0.000683] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000685] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000965] last_pfn = 0x8f410 max_arch_pfn = 0x400000000
[    0.008127] found SMP MP-table at [mem 0x000fce00-0x000fce0f]
[    0.008139] esrt: Reserving ESRT space from 0x000000008a0b6718 to 0x000000008a0b6750.
[    0.008144] e820: update [mem 0x8a0b6000-0x8a0b6fff] usable ==> reserved
[    0.008158] Using GB pages for direct mapping
[    0.008536] Secure boot disabled
[    0.008537] RAMDISK: [mem 0x302ff000-0x34176fff]
[    0.008545] ACPI: Early table checksum verification disabled
[    0.008548] ACPI: RSDP 0x000000008E51D000 000024 (v02 ALASKA)
[    0.008552] ACPI: XSDT 0x000000008E51D0A8 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008558] ACPI: FACP 0x000000008E55D6C0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.008563] ACPI: DSDT 0x000000008E51D200 0404C0 (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.008567] ACPI: FACS 0x000000008E9B6080 000040
[    0.008569] ACPI: APIC 0x000000008E55D7D8 0000A0 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.008572] ACPI: FPDT 0x000000008E55D878 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008575] ACPI: FIDT 0x000000008E55D8C0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008578] ACPI: MCFG 0x000000008E55D960 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.008581] ACPI: WSMT 0x000000008E56C868 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008584] ACPI: SSDT 0x000000008E55D9F8 001B1C (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.008588] ACPI: SSDT 0x000000008E55F518 003099 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.008591] ACPI: SSDT 0x000000008E5625B8 00232B (v02 PegSsd PegSsdt  00001000 INTL 20160527)
[    0.008594] ACPI: HPET 0x000000008E5648E8 000038 (v01 ALASKA A M I    00000002      01000013)
[    0.008597] ACPI: SSDT 0x000000008E564920 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
[    0.008600] ACPI: SSDT 0x000000008E5658D0 002FD1 (v02 INTEL  xh_cfsd4 00000000 INTL 20160527)
[    0.008603] ACPI: UEFI 0x000000008E5688A8 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.008606] ACPI: LPIT 0x000000008E5688F0 000094 (v01 ALASKA A M I    00000002      01000013)
[    0.008609] ACPI: SSDT 0x000000008E568988 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527)
[    0.008612] ACPI: SSDT 0x000000008E56B168 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
[    0.008615] ACPI: DBGP 0x000000008E56C650 000034 (v01 ALASKA A M I    00000002      01000013)
[    0.008618] ACPI: DBG2 0x000000008E56C688 000054 (v00 ALASKA A M I    00000002      01000013)
[    0.008621] ACPI: SSDT 0x000000008E56C6E0 000144 (v02 Intel  ADebTabl 00001000 INTL 20160527)
[    0.008624] ACPI: WPBT 0x000000008E56C828 00003C (v01 ALASKA A M I    00000001 ASUS 00000001)
[    0.008627] ACPI: Reserving FACP table memory at [mem 0x8e55d6c0-0x8e55d7d3]
[    0.008628] ACPI: Reserving DSDT table memory at [mem 0x8e51d200-0x8e55d6bf]
[    0.008629] ACPI: Reserving FACS table memory at [mem 0x8e9b6080-0x8e9b60bf]
[    0.008630] ACPI: Reserving APIC table memory at [mem 0x8e55d7d8-0x8e55d877]
[    0.008631] ACPI: Reserving FPDT table memory at [mem 0x8e55d878-0x8e55d8bb]
[    0.008632] ACPI: Reserving FIDT table memory at [mem 0x8e55d8c0-0x8e55d95b]
[    0.008632] ACPI: Reserving MCFG table memory at [mem 0x8e55d960-0x8e55d99b]
[    0.008633] ACPI: Reserving WSMT table memory at [mem 0x8e56c868-0x8e56c88f]
[    0.008634] ACPI: Reserving SSDT table memory at [mem 0x8e55d9f8-0x8e55f513]
[    0.008635] ACPI: Reserving SSDT table memory at [mem 0x8e55f518-0x8e5625b0]
[    0.008636] ACPI: Reserving SSDT table memory at [mem 0x8e5625b8-0x8e5648e2]
[    0.008636] ACPI: Reserving HPET table memory at [mem 0x8e5648e8-0x8e56491f]
[    0.008637] ACPI: Reserving SSDT table memory at [mem 0x8e564920-0x8e5658cd]
[    0.008638] ACPI: Reserving SSDT table memory at [mem 0x8e5658d0-0x8e5688a0]
[    0.008639] ACPI: Reserving UEFI table memory at [mem 0x8e5688a8-0x8e5688e9]
[    0.008640] ACPI: Reserving LPIT table memory at [mem 0x8e5688f0-0x8e568983]
[    0.008640] ACPI: Reserving SSDT table memory at [mem 0x8e568988-0x8e56b165]
[    0.008641] ACPI: Reserving SSDT table memory at [mem 0x8e56b168-0x8e56c649]
[    0.008642] ACPI: Reserving DBGP table memory at [mem 0x8e56c650-0x8e56c683]
[    0.008643] ACPI: Reserving DBG2 table memory at [mem 0x8e56c688-0x8e56c6db]
[    0.008644] ACPI: Reserving SSDT table memory at [mem 0x8e56c6e0-0x8e56c823]
[    0.008645] ACPI: Reserving WPBT table memory at [mem 0x8e56c828-0x8e56c863]
[    0.008799] No NUMA configuration found
[    0.008800] Faking a node at [mem 0x0000000000000000-0x000000086dffffff]
[    0.008803] NODE_DATA(0) allocated [mem 0x86dffb000-0x86dffffff]
[    0.008842] Zone ranges:
[    0.008842]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008844]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.008846]   Normal   [mem 0x0000000100000000-0x000000086dffffff]
[    0.008847]   Device   empty
[    0.008848] Movable zone start for each node
[    0.008849] Early memory node ranges
[    0.008849]   node   0: [mem 0x0000000000001000-0x000000000005efff]
[    0.008851]   node   0: [mem 0x0000000000060000-0x000000000009ffff]
[    0.008852]   node   0: [mem 0x0000000000100000-0x000000008caa5fff]
[    0.008853]   node   0: [mem 0x000000008f40f000-0x000000008f40ffff]
[    0.008854]   node   0: [mem 0x0000000100000000-0x000000086dffffff]
[    0.008857] Initmem setup node 0 [mem 0x0000000000001000-0x000000086dffffff]
[    0.008860] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.008862] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.008881] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.011893] On node 0, zone DMA32: 10601 pages in unavailable ranges
[    0.052509] On node 0, zone Normal: 3056 pages in unavailable ranges
[    0.052587] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.052878] ACPI: PM-Timer IO Port: 0x1808
[    0.052885] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.052886] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.052887] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.052888] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.052889] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.052889] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.052923] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.052926] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.052928] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.052932] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.052933] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.052936] TSC deadline timer available
[    0.052937] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[    0.052950] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.052952] PM: hibernation: Registered nosave memory: [mem 0x0005f000-0x0005ffff]
[    0.052953] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.052955] PM: hibernation: Registered nosave memory: [mem 0x8a0b6000-0x8a0b6fff]
[    0.052956] PM: hibernation: Registered nosave memory: [mem 0x8caa6000-0x8e311fff]
[    0.052957] PM: hibernation: Registered nosave memory: [mem 0x8e312000-0x8e580fff]
[    0.052958] PM: hibernation: Registered nosave memory: [mem 0x8e581000-0x8e9b6fff]
[    0.052958] PM: hibernation: Registered nosave memory: [mem 0x8e9b7000-0x8f34bfff]
[    0.052959] PM: hibernation: Registered nosave memory: [mem 0x8f34c000-0x8f40efff]
[    0.052961] PM: hibernation: Registered nosave memory: [mem 0x8f410000-0x8fffffff]
[    0.052961] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfdffffff]
[    0.052962] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.052963] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.052963] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.052964] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.052965] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.052965] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[    0.052966] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.052967] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.052968] [mem 0x90000000-0xfdffffff] available for PCI devices
[    0.052970] Booting paravirtualized kernel on bare hardware
[    0.052971] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.058869] setup_percpu: NR_CPUS:320 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
[    0.059165] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.059171] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.059173] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[    0.059191] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e7bc9921-8e1e-492d-a35e-2b457ef3d91e rw loglevel=3 quiet
[    0.059250] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
[    0.059288] random: crng init done
[    0.061954] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.063296] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.063395] Fallback order for Node 0: 0
[    0.063398] Built 1 zonelists, mobility grouping on.  Total pages: 8235772
[    0.063399] Policy zone: Normal
[    0.063594] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.063598] software IO TLB: area num 8.
[    0.131306] Memory: 32637572K/33466644K available (16384K kernel code, 2116K rwdata, 12868K rodata, 3404K init, 3888K bss, 828812K reserved, 0K cma-reserved)
[    0.131517] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.131528] Kernel/User page tables isolation: enabled
[    0.131553] ftrace: allocating 48550 entries in 190 pages
[    0.139555] ftrace: allocated 190 pages with 6 groups
[    0.139624] Dynamic Preempt: full
[    0.139660] rcu: Preemptible hierarchical RCU implementation.
[    0.139661] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=6.
[    0.139662] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.139663]  Trampoline variant of Tasks RCU enabled.
[    0.139664]  Rude variant of Tasks RCU enabled.
[    0.139664]  Tracing variant of Tasks RCU enabled.
[    0.139665] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.139666] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.142468] NR_IRQS: 20736, nr_irqs: 1536, preallocated irqs: 16
[    0.142736] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.143005] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.143035] Console: colour dummy device 80x25
[    0.143037] printk: legacy console [tty0] enabled
[    0.143077] ACPI: Core revision 20230628
[    0.143379] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.143472] APIC: Switch to symmetric I/O mode setup
[    0.144792] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.149782] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.163463] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[    0.163467] Calibrating delay loop (skipped), value calculated using timer frequency.. 5802.42 BogoMIPS (lpj=9666286)
[    0.163485] x86/cpu: VMX (outside TXT) disabled by BIOS
[    0.163486] x86/cpu: SGX disabled by BIOS.
[    0.163491] CPU0: Thermal monitoring enabled (TM1)
[    0.163539] process: using mwait in idle threads
[    0.163542] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.163543] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.163547] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.163549] Spectre V2 : Mitigation: IBRS
[    0.163550] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.163551] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.163552] RETBleed: Mitigation: IBRS
[    0.163553] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.163555] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.163565] MDS: Mitigation: Clear CPU buffers
[    0.163566] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.163570] SRBDS: Mitigation: Microcode
[    0.163578] GDS: Mitigation: Microcode
[    0.163584] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.163586] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.163587] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.163588] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.163590] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.163591] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.163593] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.163595] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.163596] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.191998] Freeing SMP alternatives memory: 40K
[    0.192001] pid_max: default: 32768 minimum: 301
[    0.195653] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[    0.195679] landlock: Up and running.
[    0.195681] Yama: becoming mindful.
[    0.195685] LSM support for eBPF active
[    0.195733] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.195763] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.196857] smpboot: CPU0: Intel(R) Core(TM) i5-9400F CPU @ 2.90GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[    0.197014] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.197027] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.197042] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.197058] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.197082] ... version:                4
[    0.197083] ... bit width:              48
[    0.197084] ... generic registers:      8
[    0.197085] ... value mask:             0000ffffffffffff
[    0.197086] ... max period:             00007fffffffffff
[    0.197087] ... fixed-purpose events:   3
[    0.197088] ... event mask:             00000007000000ff
[    0.197199] signal: max sigframe size: 2032
[    0.197214] Estimated ratio of average max frequency by base frequency (times 1024): 1412
[    0.198255] rcu: Hierarchical SRCU implementation.
[    0.198256] rcu:     Max phase no-delay instances is 1000.
[    0.198871] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.198922] smp: Bringing up secondary CPUs ...
[    0.199016] smpboot: x86: Booting SMP configuration:
[    0.199017] .... node  #0, CPUs:      #1 #2 #3 #4 #5
[    0.203520] smp: Brought up 1 node, 6 CPUs
[    0.203520] smpboot: Max logical packages: 1
[    0.203520] smpboot: Total of 6 processors activated (34812.57 BogoMIPS)
[    0.205816] devtmpfs: initialized
[    0.205816] x86/mm: Memory block size: 128MB
[    0.208997] ACPI: PM: Registering ACPI NVS region [mem 0x8e581000-0x8e9b6fff] (4415488 bytes)
[    0.209105] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.209115] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.209165] pinctrl core: initialized pinctrl subsystem
[    0.209380] PM: RTC time: 14:43:50, date: 2024-03-06
[    0.209848] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.210210] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.210441] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.210687] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.210708] audit: initializing netlink subsys (disabled)
[    0.210719] audit: type=2000 audit(1709736230.066:1): state=initialized audit_enabled=0 res=1
[    0.210719] thermal_sys: Registered thermal governor 'fair_share'
[    0.210719] thermal_sys: Registered thermal governor 'bang_bang'
[    0.210719] thermal_sys: Registered thermal governor 'step_wise'
[    0.210719] thermal_sys: Registered thermal governor 'user_space'
[    0.210719] thermal_sys: Registered thermal governor 'power_allocator'
[    0.210719] cpuidle: using governor ladder
[    0.210719] cpuidle: using governor menu
[    0.210719] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.210719] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.210719] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.210719] PCI: not using MMCONFIG
[    0.210719] PCI: Using configuration type 1 for base access
[    0.210719] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.210719] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.210719] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.210719] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.210719] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.210719] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.210719] ACPI: Added _OSI(Module Device)
[    0.210719] ACPI: Added _OSI(Processor Device)
[    0.210719] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.210719] ACPI: Added _OSI(Processor Aggregator Device)
[    0.311389] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.320594] ACPI: Dynamic OEM Table Load:
[    0.320601] ACPI: SSDT 0xFFFF9BA0C1849800 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.322312] ACPI: Dynamic OEM Table Load:
[    0.322317] ACPI: SSDT 0xFFFF9BA0C0B50000 0005E4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.324085] ACPI: Dynamic OEM Table Load:
[    0.324089] ACPI: SSDT 0xFFFF9BA0C0B3A500 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.325682] ACPI: Dynamic OEM Table Load:
[    0.325686] ACPI: SSDT 0xFFFF9BA0C1808200 000133 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.327269] ACPI: Dynamic OEM Table Load:
[    0.327274] ACPI: SSDT 0xFFFF9BA0C0B53000 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.329155] ACPI: Dynamic OEM Table Load:
[    0.329160] ACPI: SSDT 0xFFFF9BA0C0B57800 0005FC (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.330977] ACPI: Dynamic OEM Table Load:
[    0.330982] ACPI: SSDT 0xFFFF9BA0C1849400 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.332813] ACPI: Dynamic OEM Table Load:
[    0.332818] ACPI: SSDT 0xFFFF9BA0C0B59000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.335393] ACPI: Dynamic OEM Table Load:
[    0.335397] ACPI: SSDT 0xFFFF9BA0C1848800 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.340336] ACPI: _OSC evaluated successfully for all CPUs
[    0.341931] ACPI: Interpreter enabled
[    0.341973] ACPI: PM: (supports S0 S3 S4 S5)
[    0.341974] ACPI: Using IOAPIC for interrupt routing
[    0.344018] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.346122] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[    0.346134] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.346136] PCI: Using E820 reservations for host bridge windows
[    0.347854] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.367108] ACPI: \_SB_.PCI0.XDCI.USBC: New power resource
[    0.371463] ACPI: \_SB_.PCI0.SAT0.VOL0.V0PR: New power resource
[    0.371988] ACPI: \_SB_.PCI0.SAT0.VOL1.V1PR: New power resource
[    0.372504] ACPI: \_SB_.PCI0.SAT0.VOL2.V2PR: New power resource
[    0.380489] ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
[    0.384181] ACPI: \_TZ_.FN00: New power resource
[    0.384278] ACPI: \_TZ_.FN01: New power resource
[    0.384372] ACPI: \_TZ_.FN02: New power resource
[    0.384466] ACPI: \_TZ_.FN03: New power resource
[    0.384558] ACPI: \_TZ_.FN04: New power resource
[    0.385423] ACPI: \PIN_: New power resource
[    0.386110] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.386117] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.386258] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.386512] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
[    0.386513] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.387983] PCI host bridge to bus 0000:00
[    0.387985] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.387988] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.387990] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.387991] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.387993] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.387994] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.388104] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[    0.388178] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.388220] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.389074] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    0.389089] pci 0000:00:14.0: reg 0x10: [mem 0xa3500000-0xa350ffff 64bit]
[    0.389151] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.391227] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    0.391244] pci 0000:00:14.2: reg 0x10: [mem 0xa3516000-0xa3517fff 64bit]
[    0.391255] pci 0000:00:14.2: reg 0x18: [mem 0xa351c000-0xa351cfff 64bit]
[    0.391376] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    0.391395] pci 0000:00:16.0: reg 0x10: [mem 0xa351b000-0xa351bfff 64bit]
[    0.391468] pci 0000:00:16.0: PME# supported from D3hot
[    0.392092] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[    0.392105] pci 0000:00:17.0: reg 0x10: [mem 0xa3514000-0xa3515fff]
[    0.392112] pci 0000:00:17.0: reg 0x14: [mem 0xa351a000-0xa351a0ff]
[    0.392119] pci 0000:00:17.0: reg 0x18: [io  0x5050-0x5057]
[    0.392126] pci 0000:00:17.0: reg 0x1c: [io  0x5040-0x5043]
[    0.392132] pci 0000:00:17.0: reg 0x20: [io  0x5020-0x503f]
[    0.392139] pci 0000:00:17.0: reg 0x24: [mem 0xa3519000-0xa35197ff]
[    0.392177] pci 0000:00:17.0: PME# supported from D3hot
[    0.392674] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[    0.392762] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.393744] pci 0000:00:1b.4: [8086:a32c] type 01 class 0x060400
[    0.393826] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
[    0.393850] pci 0000:00:1b.4: PTM enabled (root), 4ns granularity
[    0.394838] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
[    0.394925] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.395898] pci 0000:00:1c.4: [8086:a33c] type 01 class 0x060400
[    0.395978] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.396002] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[    0.396991] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[    0.397072] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.397097] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.398117] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
[    0.398612] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[    0.398642] pci 0000:00:1f.3: reg 0x10: [mem 0xa3510000-0xa3513fff 64bit]
[    0.398680] pci 0000:00:1f.3: reg 0x20: [mem 0xa3100000-0xa31fffff 64bit]
[    0.398755] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.402872] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    0.402896] pci 0000:00:1f.4: reg 0x10: [mem 0xa3518000-0xa35180ff 64bit]
[    0.402924] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.403257] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    0.403272] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.403423] pci 0000:01:00.0: [10de:1b80] type 00 class 0x030000
[    0.403435] pci 0000:01:00.0: reg 0x10: [mem 0xa2000000-0xa2ffffff]
[    0.403445] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.403455] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[    0.403462] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.403480] pci 0000:01:00.0: reg 0x30: [mem 0xa3000000-0xa307ffff pref]
[    0.403503] pci 0000:01:00.0: BAR 3: assigned to efifb
[    0.403507] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.403586] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.403680] pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
[    0.403692] pci 0000:01:00.1: reg 0x10: [mem 0xa3080000-0xa3083fff]
[    0.403831] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.403834] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.403836] pci 0000:00:01.0:   bridge window [mem 0xa2000000-0xa30fffff]
[    0.403839] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.403929] acpiphp: Slot [1] registered
[    0.403937] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.404033] pci 0000:03:00.0: [1b21:1166] type 00 class 0x010601
[    0.404050] pci 0000:03:00.0: reg 0x10: [mem 0xa3482000-0xa3483fff]
[    0.404092] pci 0000:03:00.0: reg 0x24: [mem 0xa3480000-0xa3481fff]
[    0.404102] pci 0000:03:00.0: reg 0x30: [mem 0xa3400000-0xa347ffff pref]
[    0.404110] pci 0000:03:00.0: enabling Extended Tags
[    0.404167] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.404297] pci 0000:00:1b.4: PCI bridge to [bus 03]
[    0.404301] pci 0000:00:1b.4:   bridge window [mem 0xa3400000-0xa34fffff]
[    0.404384] acpiphp: Slot [1-1] registered
[    0.404394] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.404490] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.404510] pci 0000:05:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.404536] pci 0000:05:00.0: reg 0x18: [mem 0xa3304000-0xa3304fff 64bit]
[    0.404552] pci 0000:05:00.0: reg 0x20: [mem 0xa3300000-0xa3303fff 64bit]
[    0.404656] pci 0000:05:00.0: supports D1 D2
[    0.404658] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.404854] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.404857] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.404860] pci 0000:00:1c.4:   bridge window [mem 0xa3300000-0xa33fffff]
[    0.404949] pci 0000:06:00.0: [144d:a809] type 00 class 0x010802
[    0.404969] pci 0000:06:00.0: reg 0x10: [mem 0xa3200000-0xa3203fff 64bit]
[    0.405256] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.405260] pci 0000:00:1d.0:   bridge window [mem 0xa3200000-0xa32fffff]
[    0.407113] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.407217] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.407318] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.407419] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.407520] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.407622] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.407723] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.407824] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.414048] iommu: Default domain type: Translated
[    0.414048] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.414048] SCSI subsystem initialized
[    0.414048] libata version 3.00 loaded.
[    0.414048] ACPI: bus type USB registered
[    0.414048] usbcore: registered new interface driver usbfs
[    0.414048] usbcore: registered new interface driver hub
[    0.414048] usbcore: registered new device driver usb
[    0.414048] EDAC MC: Ver: 3.0.0
[    0.414048] efivars: Registered efivars operations
[    0.414048] NetLabel: Initializing
[    0.414048] NetLabel:  domain hash size = 128
[    0.414048] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.414048] NetLabel:  unlabeled traffic allowed by default
[    0.414048] mctp: management component transport protocol core
[    0.414048] NET: Registered PF_MCTP protocol family
[    0.414048] PCI: Using ACPI for IRQ routing
[    0.458390] PCI: pci_cache_line_size set to 64 bytes
[    0.458463] e820: reserve RAM buffer [mem 0x0005f000-0x0005ffff]
[    0.458465] e820: reserve RAM buffer [mem 0x8a0b6000-0x8bffffff]
[    0.458467] e820: reserve RAM buffer [mem 0x8caa6000-0x8fffffff]
[    0.458468] e820: reserve RAM buffer [mem 0x8f410000-0x8fffffff]
[    0.458469] e820: reserve RAM buffer [mem 0x86e000000-0x86fffffff]
[    0.458509] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.458509] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.458509] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.458509] vgaarb: loaded
[    0.458509] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.458509] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.460177] clocksource: Switched to clocksource tsc-early
[    0.460855] VFS: Disk quotas dquot_6.6.0
[    0.460866] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.460928] pnp: PnP ACPI init
[    0.461018] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.461249] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.461790] pnp 00:02: [dma 0 disabled]
[    0.461950] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.462094] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.462329] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.462332] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.462334] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.462336] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.462338] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.462339] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.462341] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.462343] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.462627] system 00:06: [io  0x1800-0x18fe] could not be reserved
[    0.462629] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.462631] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.462633] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.462635] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.462637] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.462639] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.463025] system 00:07: [io  0x2000-0x20fe] has been reserved
[    0.464619] system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved
[    0.464622] system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[    0.464624] system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[    0.464626] system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved
[    0.465809] pnp: PnP ACPI: found 9 devices
[    0.471438] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.471521] NET: Registered PF_INET protocol family
[    0.471650] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.474362] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.474401] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.474513] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.474810] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.475037] TCP: Hash tables configured (established 262144 bind 65536)
[    0.475137] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.475217] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.475289] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.475364] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.475371] NET: Registered PF_XDP protocol family
[    0.475377] pci 0000:00:1b.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.475381] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.475384] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.475393] pci 0000:00:1b.0: BAR 14: assigned [mem 0xa3600000-0xa37fffff]
[    0.475396] pci 0000:00:1b.0: BAR 15: assigned [mem 0xa3800000-0xa39fffff 64bit pref]
[    0.475399] pci 0000:00:1b.0: BAR 13: assigned [io  0x6000-0x6fff]
[    0.475402] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.475405] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.475407] pci 0000:00:01.0:   bridge window [mem 0xa2000000-0xa30fffff]
[    0.475410] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.475413] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.475420] pci 0000:00:1b.0:   bridge window [io  0x6000-0x6fff]
[    0.475424] pci 0000:00:1b.0:   bridge window [mem 0xa3600000-0xa37fffff]
[    0.475427] pci 0000:00:1b.0:   bridge window [mem 0xa3800000-0xa39fffff 64bit pref]
[    0.475432] pci 0000:00:1b.4: PCI bridge to [bus 03]
[    0.475435] pci 0000:00:1b.4:   bridge window [mem 0xa3400000-0xa34fffff]
[    0.475441] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.475451] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.475453] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.475456] pci 0000:00:1c.4:   bridge window [mem 0xa3300000-0xa33fffff]
[    0.475462] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.475465] pci 0000:00:1d.0:   bridge window [mem 0xa3200000-0xa32fffff]
[    0.475471] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.475473] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.475475] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.475476] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.475478] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    0.475479] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.475481] pci_bus 0000:01: resource 1 [mem 0xa2000000-0xa30fffff]
[    0.475482] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.475484] pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
[    0.475485] pci_bus 0000:02: resource 1 [mem 0xa3600000-0xa37fffff]
[    0.475486] pci_bus 0000:02: resource 2 [mem 0xa3800000-0xa39fffff 64bit pref]
[    0.475488] pci_bus 0000:03: resource 1 [mem 0xa3400000-0xa34fffff]
[    0.475490] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.475491] pci_bus 0000:05: resource 1 [mem 0xa3300000-0xa33fffff]
[    0.475492] pci_bus 0000:06: resource 1 [mem 0xa3200000-0xa32fffff]
[    0.476485] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    0.476511] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.476560] PCI: CLS 64 bytes, default 64
[    0.476566] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.476567] software IO TLB: mapped [mem 0x0000000084706000-0x0000000088706000] (64MB)
[    0.476605] Trying to unpack rootfs image as initramfs...
[    0.476637] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.481191] Initialise system trusted keyrings
[    0.481199] Key type blacklist registered
[    0.481229] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.481236] zbud: loaded
[    0.481361] integrity: Platform Keyring initialized
[    0.481363] integrity: Machine keyring initialized
[    0.494658] Key type asymmetric registered
[    0.494661] Asymmetric key parser 'x509' registered
[    0.494682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.494727] io scheduler mq-deadline registered
[    0.494728] io scheduler kyber registered
[    0.494740] io scheduler bfq registered
[    0.495347] pcieport 0000:00:1b.4: AER: enabled with IRQ 122
[    0.495388] pcieport 0000:00:1b.4: DPC: enabled with IRQ 122
[    0.495390] pcieport 0000:00:1b.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.495737] pcieport 0000:00:1c.4: AER: enabled with IRQ 124
[    0.495780] pcieport 0000:00:1c.4: DPC: enabled with IRQ 124
[    0.495782] pcieport 0000:00:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.496013] pcieport 0000:00:1d.0: AER: enabled with IRQ 125
[    0.496051] pcieport 0000:00:1d.0: DPC: enabled with IRQ 125
[    0.496053] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.496140] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.496735] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.496759] ACPI: button: Sleep Button [SLPB]
[    0.496790] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.496806] ACPI: button: Power Button [PWRB]
[    0.496833] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.500620] ACPI: button: Power Button [PWRF]
[    0.502229] thermal LNXTHERM:00: registered as thermal_zone0
[    0.502232] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.502411] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.502896] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.506751] Non-volatile memory driver v1.3
[    0.506753] Linux agpgart interface v0.103
[    0.506853] ACPI: bus type drm_connector registered
[    0.509184] ahci 0000:00:17.0: version 3.0
[    0.519489] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    0.519494] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[    0.547781] scsi host0: ahci
[    0.548091] scsi host1: ahci
[    0.548377] scsi host2: ahci
[    0.548615] scsi host3: ahci
[    0.548658] ata1: SATA max UDMA/133 abar m2048@0xa3519000 port 0xa3519100 irq 126 lpm-pol 0
[    0.548660] ata2: SATA max UDMA/133 abar m2048@0xa3519000 port 0xa3519180 irq 126 lpm-pol 0
[    0.548662] ata3: SATA max UDMA/133 abar m2048@0xa3519000 port 0xa3519200 irq 126 lpm-pol 0
[    0.548664] ata4: SATA max UDMA/133 abar m2048@0xa3519000 port 0xa3519280 irq 126 lpm-pol 0
[    0.548823] ahci 0000:03:00.0: ASM1166 has only six ports
[    0.548834] ahci 0000:03:00.0: forcing port_map 0xffffff3f -> 0x3f
[    0.548963] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
[    0.559119] ahci 0000:03:00.0: AHCI 0001.0301 32 slots 32 ports 6 Gbps 0x3f impl SATA mode
[    0.559124] ahci 0000:03:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst
[    0.560943] scsi host4: ahci
[    0.561197] scsi host5: ahci
[    0.561458] scsi host6: ahci
[    0.561720] scsi host7: ahci
[    0.561839] scsi host8: ahci
[    0.562044] scsi host9: ahci
[    0.562241] scsi host10: ahci
[    0.562428] scsi host11: ahci
[    0.562579] scsi host12: ahci
[    0.562713] scsi host13: ahci
[    0.562849] scsi host14: ahci
[    0.562959] scsi host15: ahci
[    0.563105] scsi host16: ahci
[    0.563203] scsi host17: ahci
[    0.563340] scsi host18: ahci
[    0.563515] scsi host19: ahci
[    0.563726] scsi host20: ahci
[    0.563797] scsi host21: ahci
[    0.564016] scsi host22: ahci
[    0.564193] scsi host23: ahci
[    0.564350] scsi host24: ahci
[    0.564450] scsi host25: ahci
[    0.564551] scsi host26: ahci
[    0.564682] scsi host27: ahci
[    0.564775] scsi host28: ahci
[    0.564842] scsi host29: ahci
[    0.564912] scsi host30: ahci
[    0.564979] scsi host31: ahci
[    0.565044] scsi host32: ahci
[    0.565119] scsi host33: ahci
[    0.565184] scsi host34: ahci
[    0.565250] scsi host35: ahci
[    0.565285] ata5: SATA max UDMA/133 abar m8192@0xa3480000 port 0xa3480100 irq 127 lpm-pol 0
[    0.565288] ata6: SATA max UDMA/133 abar m8192@0xa3480000 port 0xa3480180 irq 127 lpm-pol 0
[    0.565290] ata7: SATA max UDMA/133 abar m8192@0xa3480000 port 0xa3480200 irq 127 lpm-pol 0
[    0.565293] ata8: SATA max UDMA/133 abar m8192@0xa3480000 port 0xa3480280 irq 127 lpm-pol 0
[    0.565294] ata9: SATA max UDMA/133 abar m8192@0xa3480000 port 0xa3480300 irq 127 lpm-pol 0
[    0.565296] ata10: SATA max UDMA/133 abar m8192@0xa3480000 port 0xa3480380 irq 127 lpm-pol 0
[    0.565298] ata11: DUMMY
[    0.565299] ata12: DUMMY
[    0.565299] ata13: DUMMY
[    0.565300] ata14: DUMMY
[    0.565301] ata15: DUMMY
[    0.565301] ata16: DUMMY
[    0.565302] ata17: DUMMY
[    0.565303] ata18: DUMMY
[    0.565303] ata19: DUMMY
[    0.565304] ata20: DUMMY
[    0.565305] ata21: DUMMY
[    0.565305] ata22: DUMMY
[    0.565306] ata23: DUMMY
[    0.565307] ata24: DUMMY
[    0.565307] ata25: DUMMY
[    0.565308] ata26: DUMMY
[    0.565309] ata27: DUMMY
[    0.565310] ata28: DUMMY
[    0.565310] ata29: DUMMY
[    0.565311] ata30: DUMMY
[    0.565312] ata31: DUMMY
[    0.565312] ata32: DUMMY
[    0.565313] ata33: DUMMY
[    0.565314] ata34: DUMMY
[    0.565314] ata35: DUMMY
[    0.565315] ata36: DUMMY
[    0.565392] usbcore: registered new interface driver usbserial_generic
[    0.565397] usbserial: USB Serial support registered for generic
[    0.565493] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.566360] rtc_cmos rtc_cmos: registered as rtc0
[    0.566524] rtc_cmos rtc_cmos: setting system clock to 2024-03-06T14:43:50 UTC (1709736230)
[    0.566549] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.566711] intel_pstate: Intel P-state driver initializing
[    0.567056] intel_pstate: Disabling energy efficiency optimization
[    0.567057] intel_pstate: HWP enabled
[    0.567082] ledtrig-cpu: registered to indicate activity on CPUs
[    0.567445] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.567700] fbcon: Deferring console take-over
[    0.567702] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.567730] hid: raw HID events driver (C) Jiri Kosina
[    0.567794] drop_monitor: Initializing network drop monitor service
[    0.577896] NET: Registered PF_INET6 protocol family
[    0.597060] Freeing initrd memory: 63968K
[    0.602077] Segment Routing with IPv6
[    0.602079] RPL Segment Routing with IPv6
[    0.602089] In-situ OAM (IOAM) with IPv6
[    0.602111] NET: Registered PF_PACKET protocol family
[    0.602656] microcode: Current revision: 0x000000f4
[    0.602657] microcode: Updated early from: 0x000000d6
[    0.602858] IPI shorthand broadcast: enabled
[    0.604294] sched_clock: Marking stable (603334600, 562648)->(617543515, -13646267)
[    0.604528] registered taskstats version 1
[    0.605047] Loading compiled-in X.509 certificates
[    0.607171] Loaded X.509 cert 'Build time autogenerated kernel key: dfd92aae7380b13aa1f388f309458e79c73cbdce'
[    0.608563] zswap: loaded using pool zstd/zsmalloc
[    0.610074] Key type .fscrypt registered
[    0.610075] Key type fscrypt-provisioning registered
[    0.611073] integrity: Loading X.509 certificate: UEFI:db
[    0.611387] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[    0.611389] integrity: Loading X.509 certificate: UEFI:db
[    0.611505] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[    0.611506] integrity: Loading X.509 certificate: UEFI:db
[    0.611520] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.611521] integrity: Loading X.509 certificate: UEFI:db
[    0.611534] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.611534] integrity: Loading X.509 certificate: UEFI:db
[    0.611653] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.612756] PM:   Magic number: 0:600:737
[    0.615965] RAS: Correctable Errors collector initialized.
[    0.616013] clk: Disabling unused clocks
[    0.861014] ata3: SATA link down (SStatus 4 SControl 300)
[    0.861172] ata4: SATA link down (SStatus 4 SControl 300)
[    0.861203] ata2: SATA link down (SStatus 4 SControl 300)
[    0.861283] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.861789] ata1.00: supports DRM functions and may not be fully accessible
[    0.861797] ata1.00: ATA-9: Crucial_CT120M500SSD1, MU03, max UDMA/133
[    0.877532] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.881162] ata5: SATA link down (SStatus 0 SControl 300)
[    0.896909] ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv NCQ-prio
[    0.897454] ata1.00: supports DRM functions and may not be fully accessible
[    0.932679] ata1.00: configured for UDMA/133
[    0.932959] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT120M50 MU03 PQ: 0 ANSI: 5
[    0.933958] ata1.00: Enabling discard_zeroes_data
[    0.934060] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    0.934079] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.934106] sd 0:0:0:0: [sda] Write Protect is off
[    0.934112] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.934144] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.934211] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    0.934907] ata1.00: Enabling discard_zeroes_data
[    0.937329]  sda: sda1
[    0.937802] sd 0:0:0:0: [sda] supports TCG Opal
[    0.937813] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.247833] ata6: SATA link down (SStatus 0 SControl 300)
[    1.477325] tsc: Refined TSC clocksource calibration: 2904.001 MHz
[    1.477341] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc06c056a, max_idle_ns: 440795257733 ns
[    1.477431] clocksource: Switched to clocksource tsc
[    1.561159] ata7: SATA link down (SStatus 0 SControl 300)
[    1.874504] ata8: SATA link down (SStatus 0 SControl 300)
[    2.187825] ata9: SATA link down (SStatus 0 SControl 300)
[    2.501201] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.502490] ata10.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133
[    2.503072] ata10.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    2.503086] ata10.00: Features: NCQ-sndrcv
[    2.504722] ata10.00: configured for UDMA/133
[    2.504978] scsi 9:0:0:0: Direct-Access     ATA      ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5
[    2.505725] sd 9:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    2.505736] sd 9:0:0:0: [sdb] 4096-byte physical blocks
[    2.505761] sd 9:0:0:0: [sdb] Write Protect is off
[    2.505767] sd 9:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.505799] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.505854] sd 9:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    2.571056]  sdb: sdb1 sdb9
[    2.571565] sd 9:0:0:0: [sdb] Attached SCSI disk
[    2.574697] Freeing unused decrypted memory: 2028K
[    2.575913] Freeing unused kernel image (initmem) memory: 3404K
[    2.587324] Write protecting the kernel read-only data: 30720k
[    2.589156] Freeing unused kernel image (rodata/data gap) memory: 1468K
[    2.629424] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.629427] rodata_test: all tests were successful
[    2.629428] x86/mm: Checking user space page tables
[    2.665272] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.665275] Run /init as init process
[    2.665276]   with arguments:
[    2.665277]     /init
[    2.665278]   with environment:
[    2.665278]     HOME=/
[    2.665279]     TERM=linux
[    2.665279]     BOOT_IMAGE=/vmlinuz-linux
[    2.912237] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.912243] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.913317] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    2.913508] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.913511] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.913513] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    2.913542] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[    2.913544] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.913545] usb usb1: Product: xHCI Host Controller
[    2.913546] usb usb1: Manufacturer: Linux 6.7.8-arch1-1 xhci-hcd
[    2.913547] usb usb1: SerialNumber: 0000:00:14.0
[    2.913662] hub 1-0:1.0: USB hub found
[    2.913678] hub 1-0:1.0: 16 ports detected
[    2.917541] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[    2.917544] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.917546] usb usb2: Product: xHCI Host Controller
[    2.917547] usb usb2: Manufacturer: Linux 6.7.8-arch1-1 xhci-hcd
[    2.917548] usb usb2: SerialNumber: 0000:00:14.0
[    2.917625] hub 2-0:1.0: USB hub found
[    2.917637] hub 2-0:1.0: 10 ports detected
[    2.929990] nvme nvme0: pci function 0000:06:00.0
[    2.942894] nvme nvme0: Shutdown timeout set to 8 seconds
[    2.964687] nvme nvme0: allocated 64 MiB host memory buffer.
[    3.003061] nvme nvme0: 6/0/0 default/read/poll queues
[    3.012867]  nvme0n1: p1 p2
[    3.163970] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    3.243452] spl: loading out-of-tree module taints kernel.
[    3.243485] spl: module verification failed: signature and/or required key missing - tainting kernel
[    3.268453] zfs: module license 'CDDL' taints kernel.
[    3.268463] Disabling lock debugging due to kernel taint
[    3.268555] zfs: module license taints kernel.
[    3.312319] usb 1-2: New USB device found, idVendor=04f9, idProduct=024a, bcdDevice= 1.00
[    3.312323] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[    3.312324] usb 1-2: SerialNumber: U62712E2N914342
[    3.437287] usb 1-11: new full-speed USB device number 3 using xhci_hcd
[    3.579824] usb 1-11: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[    3.579827] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.579828] usb 1-11: Product: USB Receiver
[    3.579829] usb 1-11: Manufacturer: Logitech
[    3.737398] usbcore: registered new interface driver usbhid
[    3.737400] usbhid: USB HID core driver
[    3.740656] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:046D:C534.0001/input/input3
[    3.797510] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-11/input0
[    3.797704] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input4
[    3.797828] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input5
[    3.854090] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input6
[    3.854327] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-11/input1
[    4.501077] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-11/input0
[    4.599189] ZFS: Loaded module v2.2.3-1, ZFS pool version 5000, ZFS filesystem version 5
[    4.695559] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-11/input1
[    4.752354] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1
[    4.754006] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input9
[    4.754365] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
[    4.754777] hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-11/input1:1
[    4.755551] input: Logitech Wireless Mouse PID:4091 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4091.0004/input/input14
[    4.756292] hid-generic 0003:046D:4091.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4091] on usb-0000:00:14.0-11/input1:2
[    4.898924] input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input18
[    4.899584] logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-11/input1:1
[    4.900438] logitech-hidpp-device 0003:046D:4023.0003: Disconnected
[    4.928591] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4091.0004/input/input19
[    4.929027] logitech-hidpp-device 0003:046D:4091.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-11/input1:2
[    4.930401] logitech-hidpp-device 0003:046D:4091.0004: Disconnected
[   24.039034] fbcon: Taking over console
[   24.040747] Console: switching to colour frame buffer device 128x48
[   24.102588] EXT4-fs (nvme0n1p2): mounted filesystem e7bc9921-8e1e-492d-a35e-2b457ef3d91e r/w with ordered data mode. Quota mode: none.
[   30.266398] systemd[1]: systemd 255.4-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[   30.266404] systemd[1]: Detected architecture x86-64.
[   30.267348] systemd[1]: Hostname set to <hermes>.
[   30.807384] systemd[1]: bpf-lsm: LSM BPF program attached
[   30.931105] systemd[1]: Queued start job for default target Graphical Interface.
[   30.976436] systemd[1]: Created slice Slice /system/dirmngr.
[   30.978026] systemd[1]: Created slice Slice /system/getty.
[   30.979475] systemd[1]: Created slice Slice /system/gpg-agent.
[   30.980962] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[   30.982393] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[   30.983822] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[   30.985252] systemd[1]: Created slice Slice /system/keyboxd.
[   30.986666] systemd[1]: Created slice Slice /system/modprobe.
[   30.987912] systemd[1]: Created slice User and Session Slice.
[   30.988162] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   30.988352] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   30.988937] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   30.989009] systemd[1]: Expecting device /dev/disk/by-uuid/C869-B025...
[   30.989045] systemd[1]: Reached target Local Encrypted Volumes.
[   30.989096] systemd[1]: Reached target Local Integrity Protected Volumes.
[   30.989167] systemd[1]: Reached target Remote File Systems.
[   30.989200] systemd[1]: Reached target Slice Units.
[   30.989252] systemd[1]: Reached target Swaps.
[   30.989298] systemd[1]: Reached target Local Verity Protected Volumes.
[   30.989603] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   30.993480] systemd[1]: Listening on Process Core Dump Socket.
[   30.993955] systemd[1]: Listening on Journal Socket (/dev/log).
[   30.994404] systemd[1]: Listening on Journal Socket.
[   30.994532] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   30.995266] systemd[1]: Listening on udev Control Socket.
[   30.995661] systemd[1]: Listening on udev Kernel Socket.
[   30.998820] systemd[1]: Mounting Huge Pages File System...
[   31.000699] systemd[1]: Mounting POSIX Message Queue File System...
[   31.002605] systemd[1]: Mounting Kernel Debug File System...
[   31.004126] systemd[1]: Mounting Kernel Trace File System...
[   31.005728] systemd[1]: Mounting Temporary Directory /tmp...
[   31.009293] systemd[1]: Starting Create List of Static Device Nodes...
[   31.009976] systemd[1]: Starting Load Kernel Module configfs...
[   31.010541] systemd[1]: Starting Load Kernel Module dm_mod...
[   31.011180] systemd[1]: Starting Load Kernel Module drm...
[   31.011796] systemd[1]: Starting Load Kernel Module fuse...
[   31.012382] systemd[1]: Starting Load Kernel Module loop...
[   31.012451] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[   31.014004] systemd[1]: Starting Journal Service...
[   31.016558] systemd[1]: Starting Load Kernel Modules...
[   31.016570] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   31.019938] systemd[1]: Starting Remount Root and Kernel File Systems...
[   31.019970] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   31.020595] loop: module loaded
[   31.020874] systemd[1]: Starting Coldplug All udev Devices...
[   31.021897] systemd[1]: Mounted Huge Pages File System.
[   31.021976] systemd[1]: Mounted POSIX Message Queue File System.
[   31.022044] systemd[1]: Mounted Kernel Debug File System.
[   31.022108] systemd[1]: Mounted Kernel Trace File System.
[   31.022175] systemd[1]: Mounted Temporary Directory /tmp.
[   31.024430] device-mapper: uevent: version 1.0.3
[   31.024544] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[   31.025585] fuse: init (API version 7.39)
[   31.028110] systemd-journald[999]: Collecting audit messages is disabled.
[   31.047657] systemd[1]: Finished Create List of Static Device Nodes.
[   31.047816] EXT4-fs (nvme0n1p2): re-mounted e7bc9921-8e1e-492d-a35e-2b457ef3d91e r/w. Quota mode: none.
[   31.048431] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   31.080794] systemd[1]: Finished Load Kernel Module configfs.
[   31.080913] systemd[1]: Started Journal Service.
[   31.295695] systemd-journald[999]: Received client request to flush runtime journal.
[   31.309199] systemd-journald[999]: /var/log/journal/49639aca02e54de7948470d7249e307f/system.journal: Journal file uses a different sequence number ID, rotating.
[   31.309205] systemd-journald[999]: Rotating system journal.
[   31.743212] mousedev: PS/2 mouse device common for all mice
[   31.752754] intel_pmc_core INT33A1:00:  initialized
[   31.777200] EDAC ie31200: No ECC support
[   31.777865] EDAC ie31200: No ECC support
[   31.814343] input: PC Speaker as /devices/platform/pcspkr/input/input20
[   31.816441] usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x024A
[   31.820170] usbcore: registered new interface driver usblp
[   31.841884] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   31.845254] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   31.846602] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   31.846642] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   31.850280] i2c i2c-0: 4/4 memory slots populated (from DMI)
[   31.850876] i2c i2c-0: Successfully instantiated SPD at 0x50
[   31.851268] i2c i2c-0: Successfully instantiated SPD at 0x51
[   31.851669] i2c i2c-0: Successfully instantiated SPD at 0x52
[   31.852068] i2c i2c-0: Successfully instantiated SPD at 0x53
[   31.876758] i8042: PNP: No PS/2 controller found.
[   31.876872] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[   31.876873] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   31.876874] RAPL PMU: hw unit of domain package 2^-14 Joules
[   31.876875] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   31.880896] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[   31.881044] spi-nor spi0.0: w25q128 (16384 Kbytes)
[   31.888279] Creating 1 MTD partitions on "0000:00:1f.5":
[   31.888282] 0x000000000000-0x000001000000 : "BIOS"
[   31.895793] r8169 0000:05:00.0 eth0: RTL8168h/8111h, 24:4b:fe:7b:38:cf, XID 541, IRQ 137
[   31.895797] r8169 0000:05:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   31.905416] cryptd: max_cpu_qlen set to 1000
[   31.905845] iTCO_vendor_support: vendor-support=0
[   31.911718] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[   31.911738] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[   31.911748] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[   31.911756] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[   31.913582] r8169 0000:05:00.0 enp5s0: renamed from eth0
[   31.915084] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[   31.915842] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   31.918037] AVX2 version of gcm_enc/dec engaged.
[   31.918064] AES CTR mode by8 optimization enabled
[   31.924277] asus_wmi: ASUS WMI generic driver loaded
[   31.927127] asus_wmi: Initialization: 0x0
[   31.927157] asus_wmi: BIOS WMI version: 0.9
[   31.927302] asus_wmi: SFUN value: 0x0
[   31.927304] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[   31.928759] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input21
[   31.933019] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   31.933619] snd_hda_intel 0000:01:00.1: Disabling MSI
[   31.933623] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   32.267265] nvidia-nvlink: Nvlink Core is being initialized, major device number 239

[   32.268410] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[   32.279492] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[   32.279526] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[   32.279553] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[   32.279580] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[   32.280277] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   32.280281] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   32.280282] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   32.280284] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   32.280285] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[   32.280286] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   32.280287] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   32.280288] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   32.280289] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   32.299447] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[   32.299481] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[   32.299508] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[   32.299535] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[   32.299565] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[   32.303549] intel_tcc_cooling: Programmable TCC Offset detected
[   32.363777] intel_rapl_common: Found RAPL domain package
[   32.363779] intel_rapl_common: Found RAPL domain core
[   32.363781] intel_rapl_common: Found RAPL domain dram
[   32.384875] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  550.54.14  Thu Feb 22 01:44:30 UTC 2024
[   32.401315] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  550.54.14  Thu Feb 22 01:25:25 UTC 2024
[   32.407380] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[   32.407382] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[   39.393935] Generic FE-GE Realtek PHY r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC)
[   39.523150] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[   39.584144] r8169 0000:05:00.0 enp5s0: Link is Down
[   39.648683] nvidia-uvm: Loaded the UVM driver, major device number 237.
[   42.583090] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx
[   45.151255] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   45.154314] Bridge firewalling registered
[   45.248409] Initializing XFRM netlink socket
[   45.548038] systemd-journald[999]: /var/log/journal/49639aca02e54de7948470d7249e307f/user-1004.journal: Journal file uses a different sequence number ID, rotating.

If there's any other outputs or logs that might help, please let me know. I'll be happy to provide them. I'd appreciate any help I can get on this.

Last edited by kd0bpv (2024-03-06 15:34:53)

obelisk · 2024-03-08 07:51:06

I don't know it that the right way, but I would do....

Can you activate in UEFI/BIOS the hotplug feature for that drives?
If yes, you can do that, disconnect the SATA cable of the drives and start archlinux.
Then you can analyze what you get for messages, when you connect a SATA cable to a drive.

#Open a several shell/terminals and use:
$ journalctl -f
$ udevadm monitor
$ dmesg -w
#you can also check if the drives are listed:
$ lsblk
$ gsmartcontrol

Have you mounted the drives with fstab with /dev/sdbX ? If yes, thy to use the UUID, it the drive names are shifted (use blkid, to get the UUID).

What is that for a controller card? Do you mean a PCIe card? Have you check if there are AUR packages with firmware for it?

You can also try to check if only the kernel 6.7.8-arch1-1 has that issue by installing an older kernel from archive,
https://archive.archlinux.org/packages/l/linux/, with installing with pacman -U PACKETNAME

kd0bpv · 2024-03-08 13:35:46

Thank you for the reply! You've given me something else I can try. For hotplug, I'll have to see if I can get into an option rom or something on the PCIe controller card. I'll also see if I can downgrade my kernel using the archive. I was not aware that existed. Thank you.

There is no firmware needed for the card, and even if it did, I'd have it already, as this pool was working perfectly before that software update, and I use yay to do those, so it keeps my AUR packages updated too. Besides, as I stated originally, the card IS working. One of the 4 drives in that pool IS on-line. I just need to get the other 3 online too, and my ZFS pool will be running again.

As I've mentioned, these drives aren't even detected by the kernel, so they won't have nodes in /dev at all. Under disk/by-id, disk/by-uuid, raw block devs as an sdXY, or any other /dev node. They are effectively non-existant until the problem I described is fixed. Further, because these are members of a ZFS pool, I CANNOT mount them normally or using fstab, they can only be mounted by ZFS, ONCE I get the ROOT issue of them not even showing up in the kernel fixed.

As listed by lspci, the controller card:
03:00.0 SATA controller: ASMedia Technology Inc. ASM1166 Serial ATA Controller (rev 02)
And again, yes it is a PCIe card, and firmware is NOT required for it. That was one of the selling points of that particular card, as I recall; it's plug and boot. And it very much was. I just installed it, attached my drives, booted up, and there they were... until this system update.

kd0bpv · 2024-03-08 18:41:53

Ok, so, I did not figure out yet how to get into my option rom for the controller card. But I did go ahead and downgrade to Linux 6.7.1 from 6.7.8. I didn't feel like doing an incremental back-step until I found a working kernel, so I just went to what I reasonably believed my latest successful kernel was. In order to do the downgrade, I also had to downgrade a couple ZFS packages to match, but it's working well, now. The pool is back on-line with all 4 drives.

eleanor@hermes ~ % sudo zpool status
  pool: mass
 state: ONLINE
status: Some supported and requested features are not enabled on the pool.
        The pool can still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
        the pool may no longer be accessible by software that does not support
        the features. See zpool-features(7) for details.
  scan: scrub repaired 0B in 05:16:29 with 0 errors on Wed Jul  6 21:42:34 2022
config:

        NAME                                 STATE     READ WRITE CKSUM
        mass                                 ONLINE       0     0     0
          mirror-0                           ONLINE       0     0     0
            ata-ST4000VN008-2DR166_ZGY88JYL  ONLINE       0     0     0
            ata-ST4000VN008-2DR166_ZGY88LBA  ONLINE       0     0     0
          mirror-1                           ONLINE       0     0     0
            ata-ST4000VN008-2DR166_ZDH96E48  ONLINE       0     0     0
            ata-ST4000VN008-2DR166_ZGY80AA8  ONLINE       0     0     0

errors: No known data errors

As I have more time and energy for troubleshooting, I'll see if I can increment through kernel upgrades to see at what point it all breaks again. But for now, I'm going to call it good and take a break from this.

obelisk · 2024-03-09 09:26:47

Hi, unfortunately I have no experience with zfs. But I see there is a archlinux wiki https://wiki.archlinux.org/title/ZFS
Please read the Note, Warning and Tip block. It sound like that what you have described, with downgrade ect.
You can check which packages you have installed by pacman -Qs zfs

Kantz · 2024-03-11 23:21:45

Hi,
I got a similar issue last week at work with three machines also equipped with an ASM1166 extension card, multiple drives connected to the controller but only one recognized by the kernel after upgrading the system, whereas it worked fine before. No ZFS involved in my case.

At first I tried to tweak the kernel parameters related to ACPI and libata, hoping to get things working with the latest linux package, in vain.
Then I followed the exact same steps as you, tried the LTS, no luck, then downgraded to the kernel version installed before the upgrade: in my case I had version 6.7.4 in cache and it worked fine.

I needed to get the machines up an running quickly so I didn't investigate much further, I only checked recent commits in the kernel and it seems there have been some changes related to this controller in the libata driver, introduced in 6.7.7: https://git.kernel.org/pub/scm/linux/ke … 49133db56e

I will try to isolate one of the machines later this week (so i can reboot it without hindering my collegues) and see if the breaking change has really been introduced in 6.7.7

cryptearth · 2024-03-12 18:29:05

They've also added the ASM1064 to this: https://github.com/torvalds/linux/commi … d378c6dc09
This will break my ASM1064+JMB575 20-port card.
I reported this to them that the original "bug report" isn't one as this is rather caused by some rather free firmware support sata port-multipliers and asked to add at least a boot option so users like us which are affected by this faulty patch can disable it.
It should be completely reverted as the "fix" seem to cause more issues than it's supposed to solve - and it WILL break a lot of port-multiplier cards.
This somewhat smeels a lot like the recent amdgpu issue - or the usb audio issue ... all of these are caused because some people report something wrongly as bug - and then a wrong fix causes even more issues. Will I stuck with old kernels or required to build my own just because for a ONE line patch? Welcome to the party of Linux ...
I really should consider switching back to windows ...

Kantz · 2024-03-12 19:49:33

As a follow-up to my previous message, I tested several versions of the linux package and confirmed that the latest working version is linux-6.7.6.arch1-2, that the problem appears in linux-6.7.7.arch1-1 (so, when the patches that force the number of ports were introduced) and that it has not been fixed in 6.7.8, 6.7.9 and 6.8.

@cryptearth: thank you for the additional info, is there a way to follow the progress on your report?

cryptearth · 2024-03-15 14:10:26

Although I know my way around on mailing lists I don't know my way around bug reporting kernel issues - so I just grabbed the e-mails I found at the two github merges and mailed them directly.
I got instructed to provide a log as proof - as for some reason the maintainers seem either not able to or unwilling to add 1 and 1 to get 2 on thier own.
So I took the journey of compiling a 6.8.0 from source - which took over 3 hours on my ryzen 5600 with all 12 threads fully loaded - just to reply them with the expected result: It breaks my HBA.
There was some mailing list as CC so they got all they need - as for how to track any progress on it? Dunno ...
But I got a reply that they thought about reverting it. Additional I requested if they want to keep it at least some override should be added.

Fun fact: I noted that these asm+jmb cards are a cheap alternative for hobbyists instead of full blown SAS HBAs - and all I got was a "no one cares".
Yea, ok - THAT's the kind of attitude why linux is such a meme: Someone reports some inconvenience noone else bothered for the past decade - a "fix" gets implemented without proper testing - and now when affected users reply that the "fix" causes even more issues they don't care.
Sure I could buy one of those sas hba - but aside from they cost multiple times as those cheap sata ones I need additional hardware like speicial cables or a backplane ... but hey, who am I that I dare to notice that this "solution" would cost me couple 100 bucks just because someone else filed a report for something not even worth to put all this effort into?

On windows it was easy: Some update caused quite some data loss on those storage spaces which caused quite a big tech-media coverage and it was "fixed" rather fast ... for some time now I think about reverting back to windows: all of my games will work again, no more issues with translation/emulation or anti cheat - and all I have to sacrifice is giving up ZFS for storage spaces (at least until Jorg Lundman gets a ready to use driver working).

Thought of giving something back to the community by reporting another report as false - and get stabbed in the back with the "don't care" knife. Thanks ... not.

Kantz · 2024-03-15 20:03:11

Thank you for the update cryptearth.

Actually I browsed the mailing archives today and found this: https://lore.kernel.org/lkml/2024031321 … o.org/T/#u

So eventually it seems your report and efforts have not been in vain, they acknowledged the problem and the revert-patch seems to be on its way for a merge.

Kantz · 2024-03-20 21:20:44

The revert-patch has been merged so we should be able to get a kernel where the disks are detected correctly with one of the next releases: https://git.kernel.org/pub/scm/linux/ke … 53674e5de7

Kantz · 2024-04-08 11:59:20

I updated the workstations this morning, got linux 6.8.4, rebooted and the disks were detected correctly.

@kd0bpv @cryptearth: from what I have seen on the git repositories, the patch has been merged in in 6.8.3 kernel, so you should be fine with this version too.

Arch Linux

#1 2024-03-06 15:34:01

3 drives no longer detected after system update

#2 2024-03-08 07:51:06

Re: 3 drives no longer detected after system update

#3 2024-03-08 13:35:46

Re: 3 drives no longer detected after system update

#4 2024-03-08 18:41:53

Re: 3 drives no longer detected after system update

#5 2024-03-09 09:26:47

Re: 3 drives no longer detected after system update

#6 2024-03-11 23:21:45

Re: 3 drives no longer detected after system update

#7 2024-03-12 18:29:05

Re: 3 drives no longer detected after system update

#8 2024-03-12 19:49:33

Re: 3 drives no longer detected after system update

#9 2024-03-15 14:10:26

Re: 3 drives no longer detected after system update

#10 2024-03-15 20:03:11

Re: 3 drives no longer detected after system update

#11 2024-03-20 21:20:44

Re: 3 drives no longer detected after system update

#12 2024-04-08 11:59:20

Re: 3 drives no longer detected after system update

Board footer