random freezes, forced to hard shut down

Kasumin · 2024-03-21 01:30:07

Hello.

my laptop has the following specs:

Thinkpad x61
kernel: 6.8.1-arch1-1
CPU: Intel Core2duo T7300
GPU: (integrated) intel mobile GM965
Using mesa for the drivers and xorg for the environment

I've been experiencing full system freezes for a while. It happens completely randomly; sometimes several times a day, sometimes only once per week. It doesn't seem to be related to system load because it also happens while it's idle. The laptop becomes completely unresponsive so I can't go to the TTY and the only button that works is the power button, so every time it happens I'm forced to shut it down by pressing the button for a couple seconds. As far as I can tell, there is nothing unusual in the system Journal.
I've found several other threads in this forum with people experiencing something similar, but none of the solutions worked for me mostly because it's usually an issue related to nvidia or AMD drivers, but my laptop has integrated graphics. I tried to change the kernel to LTS but nothing changed. I also tried the solutions listed here but the issue persists.
I have windows 7 dualboot and the issue does not happen there so I believe it's not a hardware related problem, must be a software one.

I would appreciate the help.

agapito · 2024-03-21 05:11:37

I am not so sure that it is not a hardware error. Your laptop was released 17 years ago, so it most likely needs a bit more voltage than before.

To rule out hardware errors, it wouldn't hurt to stress test your laptop: https://wiki.archlinux.org/title/Stress_testing

seth · 2024-03-21 08:02:42

every time it happens I'm forced to shut it down by pressing the button for a couple seconds

Enable and try to use the https://wiki.archlinux.org/title/Keyboa … el_(SysRq) otherwise you'll find

nothing unusual in the system Journal

because the relevant parts will be lost.

full system freezes for a while

Can you quantify "a while"?

Any chance you're running OOM

xorg for the environment

What WM/DE? Do you also run a compositor (picom)?

gcb · 2024-03-21 09:56:30

i'm experiencing a bug which i suspect is on ktorrent which exhaust something on the kernel fs layer and after a day or so running I will get IO errors for everything. cannot even spaw the TTY (i can switch ttys, and things that are running mostly run... but that only gets the ability to move from blank tty back to my now-useless graphical tty.)

if i do happen to have a shell open i just get "IO errors" for everything as the shell cannot even fopen the binaries.

pressing the power button on a blank tty will show "cannot start shutdown binary" or something like that. only long pressing power off resolves this. and obviously, nothing on the logs.

seth · 2024-03-21 15:23:43

If you keep a root shell open and trigger the bug, can you still control the system from the root shell?
(You might be hitting some quota/ulimit or even run out of inodes/space, but the root gets soem exclusive wiggle-room against those)

Can your reboot w/ the magic https://wiki.archlinux.org/title/Keyboa … el_(SysRq)
In doubt, keep a terminal running "dmesg -w" in sight when allowing ktorrent to crash your system

@Kasumin, do you also use ktorrent?
@gcb, if the OP doesn't, please report your post to be split into a separate thread, thanks.

Kasumin · 2024-03-22 17:06:58

Enable and try to use the SysRq

Thank you I'll enable it and report back when it freezes again

Can you quantify "a while"?

It's been for a couple months and I've been updating it regularly so it's been happening for at least three previous kernel versions, but I'm not exactly sure.

Any chance you're running OOM

I only have 4gb. In normal use the free command says I'm only using ~1gb so I don't think that is the issue.

What WM/DE? Do you also run a compositor (picom)?

I'm using dwm and picom, yes.

do you also use ktorrent?

I do not.

agapito wrote:

To rule out hardware errors, it wouldn't hurt to stress test your laptop

I've only done a memory test with memtest86+ and it didn't find anything wrong after 15 or so cycles. I'll try the other ones as well.

Kasumin · 2024-03-26 01:24:08

Update:

My system froze today and I tried the REISUB and REISUO sequences but neither worked. The laptop stays frozen and I did activate SysRq following the guide in the wiki. I tired both sequences while the laptop is unfrozen and they worked correctly.

I tried to get the journal after the freeze but I assume nothing relevant was registered because I had to shut it down by force.

Mar 25 19:09:46 kasumi-x61Arch kernel: Linux version 6.8.1-arch1-1 (linux@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Sat, 16 Mar 2024 17:15:35 +0000
Mar 25 19:09:46 kasumi-x61Arch kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c69e483a-e1f4-4653-a9f7-398f59cac32b rw loglevel=3 quiet
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-provided physical RAM map:
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bf6affff] usable
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000bf6b0000-0x00000000bf6cbfff] ACPI data
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000bf6cc000-0x00000000bf6fffff] ACPI NVS
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable
Mar 25 19:09:46 kasumi-x61Arch kernel: NX (Execute Disable) protection: active
Mar 25 19:09:46 kasumi-x61Arch kernel: APIC: Static calls initialized
Mar 25 19:09:46 kasumi-x61Arch kernel: SMBIOS 2.4 present.
Mar 25 19:09:46 kasumi-x61Arch kernel: DMI: LENOVO /, BIOS 7NETC2WW (2.22 ) 03/22/2011
Mar 25 19:09:46 kasumi-x61Arch kernel: tsc: Fast TSC calibration using PIT
Mar 25 19:09:46 kasumi-x61Arch kernel: tsc: Detected 1994.910 MHz processor
Mar 25 19:09:46 kasumi-x61Arch kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Mar 25 19:09:46 kasumi-x61Arch kernel: last_pfn = 0x13c000 max_arch_pfn = 0x400000000
Mar 25 19:09:46 kasumi-x61Arch kernel: total RAM covered: 4023M
Mar 25 19:09:46 kasumi-x61Arch kernel: Found optimal setting for mtrr clean up
Mar 25 19:09:46 kasumi-x61Arch kernel:  gran_size: 64K         chunk_size: 128M         num_reg: 6          lose cover RAM: 0G
Mar 25 19:09:46 kasumi-x61Arch kernel: MTRR map: 9 entries (5 fixed + 4 variable; max 21), built from 8 variable MTRRs
Mar 25 19:09:46 kasumi-x61Arch kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
Mar 25 19:09:46 kasumi-x61Arch kernel: e820: update [mem 0xbf700000-0xffffffff] usable ==> reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000
Mar 25 19:09:46 kasumi-x61Arch kernel: found SMP MP-table at [mem 0x000f6980-0x000f698f]
Mar 25 19:09:46 kasumi-x61Arch kernel: RAMDISK: [mem 0x3520d000-0x368fdfff]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Early table checksum verification disabled
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: RSDP 0x00000000000F6950 000024 (v02 LENOVO)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: XSDT 0x00000000BF6BD1B7 00009C (v01 LENOVO TP-7V    00002220  LTP 00000000)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: FACP 0x00000000BF6BD300 0000F4 (v03 LENOVO TP-7V    00002220 LNVO 00000001)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20230628/tbfadt-564)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20230628/tbfadt-615)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: DSDT 0x00000000BF6BD6DB 00E35D (v01 LENOVO TP-7V    00002220 MSFT 03000000)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: FACS 0x00000000BF6E4000 000040
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: FACS 0x00000000BF6E4000 000040
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: SSDT 0x00000000BF6BD4B4 000227 (v01 LENOVO TP-7V    00002220 MSFT 03000000)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: ECDT 0x00000000BF6CBA38 000052 (v01 LENOVO TP-7V    00002220 LNVO 00000001)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: TCPA 0x00000000BF6CBA8A 000032 (v02 LENOVO TP-7V    00002220 LNVO 00000001)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: APIC 0x00000000BF6CBABC 000068 (v01 LENOVO TP-7V    00002220 LNVO 00000001)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: MCFG 0x00000000BF6CBB24 00003C (v01 LENOVO TP-7V    00002220 LNVO 00000001)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: HPET 0x00000000BF6CBB60 000038 (v01 LENOVO TP-7V    00002220 LNVO 00000001)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: SLIC 0x00000000BF6CBB98 000176 (v01 LENOVO TP-7V    00002220 SLIC 00000000)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: SLAC 0x00000000BF6CBDF0 000176 (v01 LENOVO TP-7V    00002220  LTP 00000000)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: BOOT 0x00000000BF6CBF66 000028 (v01 LENOVO TP-7V    00002220  LTP 00000001)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: ASF! 0x00000000BF6CBF8E 000072 (v16 LENOVO TP-7V    00002220 PTL  00000001)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: SSDT 0x00000000BF6E26D9 00025F (v01 LENOVO TP-7V    00002220 INTL 20050513)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: SSDT 0x00000000BF6E2938 0000A6 (v01 LENOVO TP-7V    00002220 INTL 20050513)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: SSDT 0x00000000BF6E29DE 0004F7 (v01 LENOVO TP-7V    00002220 INTL 20050513)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: SSDT 0x00000000BF6E2ED5 0001D8 (v01 LENOVO TP-7V    00002220 INTL 20050513)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving FACP table memory at [mem 0xbf6bd300-0xbf6bd3f3]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving DSDT table memory at [mem 0xbf6bd6db-0xbf6cba37]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving FACS table memory at [mem 0xbf6e4000-0xbf6e403f]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving FACS table memory at [mem 0xbf6e4000-0xbf6e403f]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving SSDT table memory at [mem 0xbf6bd4b4-0xbf6bd6da]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving ECDT table memory at [mem 0xbf6cba38-0xbf6cba89]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving TCPA table memory at [mem 0xbf6cba8a-0xbf6cbabb]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving APIC table memory at [mem 0xbf6cbabc-0xbf6cbb23]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving MCFG table memory at [mem 0xbf6cbb24-0xbf6cbb5f]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving HPET table memory at [mem 0xbf6cbb60-0xbf6cbb97]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving SLIC table memory at [mem 0xbf6cbb98-0xbf6cbd0d]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving SLAC table memory at [mem 0xbf6cbdf0-0xbf6cbf65]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving BOOT table memory at [mem 0xbf6cbf66-0xbf6cbf8d]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving ASF! table memory at [mem 0xbf6cbf8e-0xbf6cbfff]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving SSDT table memory at [mem 0xbf6e26d9-0xbf6e2937]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving SSDT table memory at [mem 0xbf6e2938-0xbf6e29dd]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving SSDT table memory at [mem 0xbf6e29de-0xbf6e2ed4]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Reserving SSDT table memory at [mem 0xbf6e2ed5-0xbf6e30ac]
Mar 25 19:09:46 kasumi-x61Arch kernel: No NUMA configuration found
Mar 25 19:09:46 kasumi-x61Arch kernel: Faking a node at [mem 0x0000000000000000-0x000000013bffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: NODE_DATA(0) allocated [mem 0x13bff8000-0x13bffcfff]
Mar 25 19:09:46 kasumi-x61Arch kernel: Zone ranges:
Mar 25 19:09:46 kasumi-x61Arch kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel:   Normal   [mem 0x0000000100000000-0x000000013bffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel:   Device   empty
Mar 25 19:09:46 kasumi-x61Arch kernel: Movable zone start for each node
Mar 25 19:09:46 kasumi-x61Arch kernel: Early memory node ranges
Mar 25 19:09:46 kasumi-x61Arch kernel:   node   0: [mem 0x0000000000001000-0x000000000009cfff]
Mar 25 19:09:46 kasumi-x61Arch kernel:   node   0: [mem 0x0000000000100000-0x00000000bf6affff]
Mar 25 19:09:46 kasumi-x61Arch kernel:   node   0: [mem 0x0000000100000000-0x000000013bffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000013bffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: On node 0, zone DMA: 1 pages in unavailable ranges
Mar 25 19:09:46 kasumi-x61Arch kernel: On node 0, zone DMA: 99 pages in unavailable ranges
Mar 25 19:09:46 kasumi-x61Arch kernel: On node 0, zone Normal: 2384 pages in unavailable ranges
Mar 25 19:09:46 kasumi-x61Arch kernel: On node 0, zone Normal: 16384 pages in unavailable ranges
Mar 25 19:09:46 kasumi-x61Arch kernel: Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PM-Timer IO Port: 0x1008
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Mar 25 19:09:46 kasumi-x61Arch kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Using ACPI (MADT) for SMP configuration information
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Mar 25 19:09:46 kasumi-x61Arch kernel: smpboot: Allowing 2 CPUs, 0 hotplug CPUs
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0x000d4000-0x000dffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xbf6b0000-0xbf6cbfff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xbf6cc000-0xbf6fffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xbf700000-0xbfffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed13fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed19fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: [mem 0xc0000000-0xefffffff] available for PCI devices
Mar 25 19:09:46 kasumi-x61Arch kernel: Booting paravirtualized kernel on bare hardware
Mar 25 19:09:46 kasumi-x61Arch kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
Mar 25 19:09:46 kasumi-x61Arch kernel: setup_percpu: NR_CPUS:320 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
Mar 25 19:09:46 kasumi-x61Arch kernel: percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u1048576
Mar 25 19:09:46 kasumi-x61Arch kernel: pcpu-alloc: s225280 r8192 d28672 u1048576 alloc=1*2097152
Mar 25 19:09:46 kasumi-x61Arch kernel: pcpu-alloc: [0] 0 1 
Mar 25 19:09:46 kasumi-x61Arch kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c69e483a-e1f4-4653-a9f7-398f59cac32b rw loglevel=3 quiet
Mar 25 19:09:46 kasumi-x61Arch kernel: Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
Mar 25 19:09:46 kasumi-x61Arch kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: Fallback order for Node 0: 0 
Mar 25 19:09:46 kasumi-x61Arch kernel: Built 1 zonelists, mobility grouping on.  Total pages: 1013461
Mar 25 19:09:46 kasumi-x61Arch kernel: Policy zone: Normal
Mar 25 19:09:46 kasumi-x61Arch kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
Mar 25 19:09:46 kasumi-x61Arch kernel: software IO TLB: area num 2.
Mar 25 19:09:46 kasumi-x61Arch kernel: Memory: 3908404K/4118832K available (16384K kernel code, 2118K rwdata, 12912K rodata, 3432K init, 3832K bss, 210168K reserved, 0K cma-reserved)
Mar 25 19:09:46 kasumi-x61Arch kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Mar 25 19:09:46 kasumi-x61Arch kernel: Kernel/User page tables isolation: enabled
Mar 25 19:09:46 kasumi-x61Arch kernel: ftrace: allocating 48793 entries in 191 pages
Mar 25 19:09:46 kasumi-x61Arch kernel: ftrace: allocated 191 pages with 7 groups
Mar 25 19:09:46 kasumi-x61Arch kernel: Dynamic Preempt: full
Mar 25 19:09:46 kasumi-x61Arch kernel: rcu: Preemptible hierarchical RCU implementation.
Mar 25 19:09:46 kasumi-x61Arch kernel: rcu:         RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
Mar 25 19:09:46 kasumi-x61Arch kernel: rcu:         RCU priority boosting: priority 1 delay 500 ms.
Mar 25 19:09:46 kasumi-x61Arch kernel:         Trampoline variant of Tasks RCU enabled.
Mar 25 19:09:46 kasumi-x61Arch kernel:         Rude variant of Tasks RCU enabled.
Mar 25 19:09:46 kasumi-x61Arch kernel:         Tracing variant of Tasks RCU enabled.
Mar 25 19:09:46 kasumi-x61Arch kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
Mar 25 19:09:46 kasumi-x61Arch kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Mar 25 19:09:46 kasumi-x61Arch kernel: NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
Mar 25 19:09:46 kasumi-x61Arch kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
Mar 25 19:09:46 kasumi-x61Arch kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Mar 25 19:09:46 kasumi-x61Arch kernel: Console: colour dummy device 80x25
Mar 25 19:09:46 kasumi-x61Arch kernel: printk: legacy console [tty0] enabled
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Core revision 20230628
Mar 25 19:09:46 kasumi-x61Arch kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Mar 25 19:09:46 kasumi-x61Arch kernel: APIC: Switch to symmetric I/O mode setup
Mar 25 19:09:46 kasumi-x61Arch kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar 25 19:09:46 kasumi-x61Arch kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3982cbe1bf1, max_idle_ns: 881590684383 ns
Mar 25 19:09:46 kasumi-x61Arch kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.06 BogoMIPS (lpj=6649700)
Mar 25 19:09:46 kasumi-x61Arch kernel: x86/cpu: VMX (outside TXT) disabled by BIOS
Mar 25 19:09:46 kasumi-x61Arch kernel: CPU0: Thermal monitoring enabled (TM2)
Mar 25 19:09:46 kasumi-x61Arch kernel: process: using mwait in idle threads
Mar 25 19:09:46 kasumi-x61Arch kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Mar 25 19:09:46 kasumi-x61Arch kernel: Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Mar 25 19:09:46 kasumi-x61Arch kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Mar 25 19:09:46 kasumi-x61Arch kernel: Spectre V2 : Mitigation: Retpolines
Mar 25 19:09:46 kasumi-x61Arch kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Mar 25 19:09:46 kasumi-x61Arch kernel: Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Mar 25 19:09:46 kasumi-x61Arch kernel: Speculative Store Bypass: Vulnerable
Mar 25 19:09:46 kasumi-x61Arch kernel: MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Mar 25 19:09:46 kasumi-x61Arch kernel: MMIO Stale Data: Unknown: No mitigations
Mar 25 19:09:46 kasumi-x61Arch kernel: x86/fpu: x87 FPU will use FXSAVE
Mar 25 19:09:46 kasumi-x61Arch kernel: Freeing SMP alternatives memory: 40K
Mar 25 19:09:46 kasumi-x61Arch kernel: pid_max: default: 32768 minimum: 301
Mar 25 19:09:46 kasumi-x61Arch kernel: LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
Mar 25 19:09:46 kasumi-x61Arch kernel: landlock: Up and running.
Mar 25 19:09:46 kasumi-x61Arch kernel: Yama: becoming mindful.
Mar 25 19:09:46 kasumi-x61Arch kernel: LSM support for eBPF active
Mar 25 19:09:46 kasumi-x61Arch kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xb)
Mar 25 19:09:46 kasumi-x61Arch kernel: RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
Mar 25 19:09:46 kasumi-x61Arch kernel: RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
Mar 25 19:09:46 kasumi-x61Arch kernel: RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
Mar 25 19:09:46 kasumi-x61Arch kernel: Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
Mar 25 19:09:46 kasumi-x61Arch kernel: core: PEBS disabled due to CPU errata
Mar 25 19:09:46 kasumi-x61Arch kernel: ... version:                2
Mar 25 19:09:46 kasumi-x61Arch kernel: ... bit width:              40
Mar 25 19:09:46 kasumi-x61Arch kernel: ... generic registers:      2
Mar 25 19:09:46 kasumi-x61Arch kernel: ... value mask:             000000ffffffffff
Mar 25 19:09:46 kasumi-x61Arch kernel: ... max period:             000000007fffffff
Mar 25 19:09:46 kasumi-x61Arch kernel: ... fixed-purpose events:   3
Mar 25 19:09:46 kasumi-x61Arch kernel: ... event mask:             0000000700000003
Mar 25 19:09:46 kasumi-x61Arch kernel: signal: max sigframe size: 1440
Mar 25 19:09:46 kasumi-x61Arch kernel: rcu: Hierarchical SRCU implementation.
Mar 25 19:09:46 kasumi-x61Arch kernel: rcu:         Max phase no-delay instances is 1000.
Mar 25 19:09:46 kasumi-x61Arch kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Mar 25 19:09:46 kasumi-x61Arch kernel: smp: Bringing up secondary CPUs ...
Mar 25 19:09:46 kasumi-x61Arch kernel: smpboot: x86: Booting SMP configuration:
Mar 25 19:09:46 kasumi-x61Arch kernel: .... node  #0, CPUs:      #1
Mar 25 19:09:46 kasumi-x61Arch kernel: TSC synchronization [CPU#0 -> CPU#1]:
Mar 25 19:09:46 kasumi-x61Arch kernel: Measured 1112510 cycles TSC warp between CPUs, turning off TSC clock.
Mar 25 19:09:46 kasumi-x61Arch kernel: tsc: Marking TSC unstable due to check_tsc_sync_source failed
Mar 25 19:09:46 kasumi-x61Arch kernel: smp: Brought up 1 node, 2 CPUs
Mar 25 19:09:46 kasumi-x61Arch kernel: smpboot: Max logical packages: 1
Mar 25 19:09:46 kasumi-x61Arch kernel: smpboot: Total of 2 processors activated (7982.12 BogoMIPS)
Mar 25 19:09:46 kasumi-x61Arch kernel: devtmpfs: initialized
Mar 25 19:09:46 kasumi-x61Arch kernel: x86/mm: Memory block size: 128MB
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PM: Registering ACPI NVS region [mem 0xbf6cc000-0xbf6fffff] (212992 bytes)
Mar 25 19:09:46 kasumi-x61Arch kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
Mar 25 19:09:46 kasumi-x61Arch kernel: futex hash table entries: 512 (order: 3, 32768 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: pinctrl core: initialized pinctrl subsystem
Mar 25 19:09:46 kasumi-x61Arch kernel: PM: RTC time: 01:09:38, date: 2024-03-26
Mar 25 19:09:46 kasumi-x61Arch kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
Mar 25 19:09:46 kasumi-x61Arch kernel: DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
Mar 25 19:09:46 kasumi-x61Arch kernel: DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Mar 25 19:09:46 kasumi-x61Arch kernel: DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Mar 25 19:09:46 kasumi-x61Arch kernel: audit: initializing netlink subsys (disabled)
Mar 25 19:09:46 kasumi-x61Arch kernel: audit: type=2000 audit(1711415377.229:1): state=initialized audit_enabled=0 res=1
Mar 25 19:09:46 kasumi-x61Arch kernel: thermal_sys: Registered thermal governor 'fair_share'
Mar 25 19:09:46 kasumi-x61Arch kernel: thermal_sys: Registered thermal governor 'bang_bang'
Mar 25 19:09:46 kasumi-x61Arch kernel: thermal_sys: Registered thermal governor 'step_wise'
Mar 25 19:09:46 kasumi-x61Arch kernel: thermal_sys: Registered thermal governor 'user_space'
Mar 25 19:09:46 kasumi-x61Arch kernel: thermal_sys: Registered thermal governor 'power_allocator'
Mar 25 19:09:46 kasumi-x61Arch kernel: cpuidle: using governor ladder
Mar 25 19:09:46 kasumi-x61Arch kernel: cpuidle: using governor menu
Mar 25 19:09:46 kasumi-x61Arch kernel: Simple Boot Flag at 0x35 set to 0x1
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Mar 25 19:09:46 kasumi-x61Arch kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Mar 25 19:09:46 kasumi-x61Arch kernel: PCI: ECAM [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) for domain 0000 [bus 00-3f]
Mar 25 19:09:46 kasumi-x61Arch kernel: PCI: ECAM [mem 0xf0000000-0xf3ffffff] reserved as E820 entry
Mar 25 19:09:46 kasumi-x61Arch kernel: PCI: Using configuration type 1 for base access
Mar 25 19:09:46 kasumi-x61Arch kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
Mar 25 19:09:46 kasumi-x61Arch kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
Mar 25 19:09:46 kasumi-x61Arch kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Added _OSI(Module Device)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Added _OSI(Processor Device)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Added _OSI(Processor Aggregator Device)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: 6 ACPI AML tables successfully acquired and loaded
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: EC: EC started
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: EC: interrupt blocked
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: EC: Boot ECDT EC used to handle transactions
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Dynamic OEM Table Load:
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: SSDT 0xFFFF933E002D5400 0002C4 (v01 PmRef  Cpu0Ist  00000100 INTL 20050513)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Dynamic OEM Table Load:
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: SSDT 0xFFFF933E00196000 00085E (v01 PmRef  Cpu0Cst  00000100 INTL 20050513)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Dynamic OEM Table Load:
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: SSDT 0xFFFF933E003A9800 0000C8 (v01 PmRef  Cpu1Ist  00000100 INTL 20050513)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Dynamic OEM Table Load:
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: SSDT 0xFFFF933E00C3AD80 000085 (v01 PmRef  Cpu1Cst  00000100 INTL 20050513)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: _OSC evaluated successfully for all CPUs
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Interpreter enabled
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PM: (supports S0 S3 S4 S5)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Using IOAPIC for interrupt routing
Mar 25 19:09:46 kasumi-x61Arch kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Mar 25 19:09:46 kasumi-x61Arch kernel: PCI: Using E820 reservations for host bridge windows
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: Enabled 5 GPEs in block 00 to 1F
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: \_SB_.PCI0.LPC_.EC__.PUBS: New power resource
Mar 25 19:09:46 kasumi-x61Arch kernel: acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
Mar 25 19:09:46 kasumi-x61Arch kernel: acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
Mar 25 19:09:46 kasumi-x61Arch kernel: acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 10
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 11
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 11
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 11
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 11
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 11
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 11
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 11
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Mar 25 19:09:46 kasumi-x61Arch kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
Mar 25 19:09:46 kasumi-x61Arch kernel: acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
Mar 25 19:09:46 kasumi-x61Arch kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
Mar 25 19:09:46 kasumi-x61Arch kernel: acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
Mar 25 19:09:46 kasumi-x61Arch kernel: acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf3ffffff] for domain 0000 [bus 00-3f] only partially covers this bridge
Mar 25 19:09:46 kasumi-x61Arch kernel: PCI host bridge to bus 0000:00
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000dffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:02.0: BAR 0 [mem 0xf8000000-0xf80fffff 64bit]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:02.0: BAR 4 [io  0x1800-0x1807]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:02.1: BAR 0 [mem 0xf8100000-0xf81fffff 64bit]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:19.0: [8086:1049] type 00 class 0x020000 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:19.0: BAR 0 [mem 0xf8200000-0xf821ffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:19.0: BAR 1 [mem 0xf8225000-0xf8225fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:19.0: BAR 2 [io  0x1840-0x185f]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1a.0: BAR 4 [io  0x1860-0x187f]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1a.1: BAR 4 [io  0x1880-0x189f]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1a.7: BAR 0 [mem 0xf8426c00-0xf8426fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1b.0: BAR 0 [mem 0xf8220000-0xf8223fff 64bit]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 PCIe Root Port
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf5ffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.0:   bridge window [mem 0xf8500000-0xf85fffff 64bit pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 PCIe Root Port
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf7ffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.1:   bridge window [mem 0xf8600000-0xf86fffff 64bit pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1d.0: BAR 4 [io  0x18a0-0x18bf]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1d.1: BAR 4 [io  0x18c0-0x18df]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1d.7: BAR 0 [mem 0xf8427000-0xf84273ff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 conventional PCI bridge
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-08] (subtractive decode)
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [io  0x4000-0x7fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [mem 0xd4000000-0xd7efffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [mem 0xd8000000-0xdbffffff 64bit pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.1: BAR 0 [io  0x0000-0x0007]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.1: BAR 1 [io  0x0000-0x0003]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.1: BAR 2 [io  0x0000-0x0007]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.1: BAR 3 [io  0x0000-0x0003]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.1: BAR 4 [io  0x18e0-0x18ef]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.1: BAR 1 [io  0x03f6]: legacy IDE quirk
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.1: BAR 3 [io  0x0376]: legacy IDE quirk
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.2: BAR 0 [io  0x1c30-0x1c37]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.2: BAR 1 [io  0x1c24-0x1c27]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.2: BAR 2 [io  0x1c28-0x1c2f]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.2: BAR 3 [io  0x1c20-0x1c23]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.2: BAR 4 [io  0x1c00-0x1c1f]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.2: BAR 5 [mem 0xf8426000-0xf84267ff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.2: PME# supported from D3hot
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.3: BAR 0 [mem 0xf8427400-0xf84274ff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1f.3: BAR 4 [io  0x1c40-0x1c5f]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:03:00.0: [8086:422b] type 00 class 0x028000 PCIe Endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:03:00.0: BAR 0 [mem 0xf7f00000-0xf7f01fff 64bit]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:05: extended config space not accessible
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0: [1180:0476] type 02 class 0x060700 CardBus bridge
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0: BAR 1 [mem 0xd7eff000-0xd7efffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0: supports D1 D2
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.2: [1180:0822] type 00 class 0x080500 conventional PCI endpoint
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.2: BAR 0 [mem 0xd7efec00-0xd7efecff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.2: supports D1 D2
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-08] (subtractive decode)
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000dffff window] (subtractive decode)
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed4bfff window] (subtractive decode)
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:06: extended config space not accessible
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:06: busn_res: [bus 06-08] end is updated to 07
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: EC: interrupt unblocked
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: EC: event unblocked
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: EC: GPE=0x12
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
Mar 25 19:09:46 kasumi-x61Arch kernel: iommu: Default domain type: Translated
Mar 25 19:09:46 kasumi-x61Arch kernel: iommu: DMA domain TLB invalidation policy: lazy mode
Mar 25 19:09:46 kasumi-x61Arch kernel: SCSI subsystem initialized
Mar 25 19:09:46 kasumi-x61Arch kernel: libata version 3.00 loaded.
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: bus type USB registered
Mar 25 19:09:46 kasumi-x61Arch kernel: usbcore: registered new interface driver usbfs
Mar 25 19:09:46 kasumi-x61Arch kernel: usbcore: registered new interface driver hub
Mar 25 19:09:46 kasumi-x61Arch kernel: usbcore: registered new device driver usb
Mar 25 19:09:46 kasumi-x61Arch kernel: EDAC MC: Ver: 3.0.0
Mar 25 19:09:46 kasumi-x61Arch kernel: NetLabel: Initializing
Mar 25 19:09:46 kasumi-x61Arch kernel: NetLabel:  domain hash size = 128
Mar 25 19:09:46 kasumi-x61Arch kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
Mar 25 19:09:46 kasumi-x61Arch kernel: NetLabel:  unlabeled traffic allowed by default
Mar 25 19:09:46 kasumi-x61Arch kernel: mctp: management component transport protocol core
Mar 25 19:09:46 kasumi-x61Arch kernel: NET: Registered PF_MCTP protocol family
Mar 25 19:09:46 kasumi-x61Arch kernel: PCI: Using ACPI for IRQ routing
Mar 25 19:09:46 kasumi-x61Arch kernel: PCI: pci_cache_line_size set to 64 bytes
Mar 25 19:09:46 kasumi-x61Arch kernel: e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: e820: reserve RAM buffer [mem 0xbf6b0000-0xbfffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:02.0: vgaarb: bridge control possible
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Mar 25 19:09:46 kasumi-x61Arch kernel: vgaarb: loaded
Mar 25 19:09:46 kasumi-x61Arch kernel: hpet: 3 channels of 0 reserved for per-cpu timers
Mar 25 19:09:46 kasumi-x61Arch kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Mar 25 19:09:46 kasumi-x61Arch kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Mar 25 19:09:46 kasumi-x61Arch kernel: clocksource: Switched to clocksource hpet
Mar 25 19:09:46 kasumi-x61Arch kernel: VFS: Disk quotas dquot_6.6.0
Mar 25 19:09:46 kasumi-x61Arch kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Mar 25 19:09:46 kasumi-x61Arch kernel: pnp: PnP ACPI init
Mar 25 19:09:46 kasumi-x61Arch kernel: pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pnp 00:00: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [io  0x164e-0x164f] has been reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [io  0x1000-0x107f] has been reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [io  0x1180-0x11bf] has been reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [io  0x0800-0x080f] has been reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [io  0x15e0-0x15ef] has been reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [io  0x1600-0x165f] could not be reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
Mar 25 19:09:46 kasumi-x61Arch kernel: pnp: PnP ACPI: found 6 devices
Mar 25 19:09:46 kasumi-x61Arch kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Mar 25 19:09:46 kasumi-x61Arch kernel: NET: Registered PF_INET protocol family
Mar 25 19:09:46 kasumi-x61Arch kernel: IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: TCP: Hash tables configured (established 32768 bind 32768)
Mar 25 19:09:46 kasumi-x61Arch kernel: MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
Mar 25 19:09:46 kasumi-x61Arch kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
Mar 25 19:09:46 kasumi-x61Arch kernel: NET: Registered PF_XDP protocol family
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf5ffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.0:   bridge window [mem 0xf8500000-0xf85fffff 64bit pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf7ffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1c.1:   bridge window [mem 0xf8600000-0xf86fffff 64bit pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0: CardBus bridge window 1 [mem 0xd8000000-0xdbffffff pref]: assigned
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0: unknown [mem 0xc0000000-0xc3ffffff]: assigned
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0: CardBus bridge window 1 [io  0x4000-0x40ff]: assigned
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0: CardBus bridge window 0 [io  0x4400-0x44ff]: assigned
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0: CardBus bridge to [bus 06-07]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0:   bridge window [io  0x4000-0x40ff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0:   bridge window [io  0x4400-0x44ff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0:   bridge window [mem 0xd8000000-0xdbffffff pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0:   bridge window [mem 0xc0000000-0xc3ffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-08]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [io  0x4000-0x7fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [mem 0xd4000000-0xd7efffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:00:1e.0:   bridge window [mem 0xd8000000-0xdbffffff 64bit pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000dffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed4bfff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:02: resource 2 [mem 0xf8500000-0xf85fffff 64bit pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf7ffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:03: resource 2 [mem 0xf8600000-0xf86fffff 64bit pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:05: resource 0 [io  0x4000-0x7fff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd7efffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:05: resource 2 [mem 0xd8000000-0xdbffffff 64bit pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:05: resource 7 [mem 0x000d4000-0x000dffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:05: resource 8 [mem 0xc0000000-0xfebfffff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:05: resource 9 [mem 0xfed40000-0xfed4bfff window]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:06: resource 0 [io  0x4000-0x40ff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:06: resource 1 [io  0x4400-0x44ff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:06: resource 2 [mem 0xd8000000-0xdbffffff pref]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci_bus 0000:06: resource 3 [mem 0xc0000000-0xc3ffffff]
Mar 25 19:09:46 kasumi-x61Arch kernel: pci 0000:05:00.0: CLS mismatch (64 != 32), using 64 bytes
Mar 25 19:09:46 kasumi-x61Arch kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Mar 25 19:09:46 kasumi-x61Arch kernel: software IO TLB: mapped [mem 0x00000000bb6b0000-0x00000000bf6b0000] (64MB)
Mar 25 19:09:46 kasumi-x61Arch kernel: Trying to unpack rootfs image as initramfs...
Mar 25 19:09:46 kasumi-x61Arch kernel: Initialise system trusted keyrings
Mar 25 19:09:46 kasumi-x61Arch kernel: Key type blacklist registered
Mar 25 19:09:46 kasumi-x61Arch kernel: workingset: timestamp_bits=41 max_order=20 bucket_order=0
Mar 25 19:09:46 kasumi-x61Arch kernel: zbud: loaded
Mar 25 19:09:46 kasumi-x61Arch kernel: integrity: Platform Keyring initialized
Mar 25 19:09:46 kasumi-x61Arch kernel: integrity: Machine keyring initialized
Mar 25 19:09:46 kasumi-x61Arch kernel: Key type asymmetric registered
Mar 25 19:09:46 kasumi-x61Arch kernel: Asymmetric key parser 'x509' registered
Mar 25 19:09:46 kasumi-x61Arch kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
Mar 25 19:09:46 kasumi-x61Arch kernel: io scheduler mq-deadline registered
Mar 25 19:09:46 kasumi-x61Arch kernel: io scheduler kyber registered
Mar 25 19:09:46 kasumi-x61Arch kernel: io scheduler bfq registered
Mar 25 19:09:46 kasumi-x61Arch kernel: pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
Mar 25 19:09:46 kasumi-x61Arch kernel: pcieport 0000:00:1c.0: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
Mar 25 19:09:46 kasumi-x61Arch kernel: pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
Mar 25 19:09:46 kasumi-x61Arch kernel: pcieport 0000:00:1c.1: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
Mar 25 19:09:46 kasumi-x61Arch kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Mar 25 19:09:46 kasumi-x61Arch kernel: Monitor-Mwait will be used to enter C-1 state
Mar 25 19:09:46 kasumi-x61Arch kernel: Monitor-Mwait will be used to enter C-2 state
Mar 25 19:09:46 kasumi-x61Arch kernel: Monitor-Mwait will be used to enter C-3 state
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: \_PR_.CPU0: Found 3 idle states
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: AC: AC Adapter [AC] (off-line)
Mar 25 19:09:46 kasumi-x61Arch kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: button: Lid Switch [LID]
Mar 25 19:09:46 kasumi-x61Arch kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: button: Sleep Button [SLPB]
Mar 25 19:09:46 kasumi-x61Arch kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: button: Power Button [PWRF]
Mar 25 19:09:46 kasumi-x61Arch kernel: thermal LNXTHERM:00: registered as thermal_zone0
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: thermal: Thermal Zone [THM0] (35 C)
Mar 25 19:09:46 kasumi-x61Arch kernel: thermal LNXTHERM:01: registered as thermal_zone1
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: thermal: Thermal Zone [THM1] (34 C)
Mar 25 19:09:46 kasumi-x61Arch kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Mar 25 19:09:46 kasumi-x61Arch kernel: Non-volatile memory driver v1.3
Mar 25 19:09:46 kasumi-x61Arch kernel: Linux agpgart interface v0.103
Mar 25 19:09:46 kasumi-x61Arch kernel: tpm_tis 00:05: 1.2 TPM (device-id 0xFFFF, rev-id 255)
Mar 25 19:09:46 kasumi-x61Arch kernel: tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 10000->10000us B 10000->10000us C 0->750000us D 0->750000us
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: battery: Slot [BAT0] (battery present)
Mar 25 19:09:46 kasumi-x61Arch kernel: tpm tpm0: TPM is disabled/deactivated (0x6)
Mar 25 19:09:46 kasumi-x61Arch kernel: ACPI: bus type drm_connector registered
Mar 25 19:09:46 kasumi-x61Arch kernel: ahci 0000:00:1f.2: version 3.0
Mar 25 19:09:46 kasumi-x61Arch kernel: ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
Mar 25 19:09:46 kasumi-x61Arch kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
Mar 25 19:09:46 kasumi-x61Arch kernel: scsi host0: ahci
Mar 25 19:09:46 kasumi-x61Arch kernel: scsi host1: ahci
Mar 25 19:09:46 kasumi-x61Arch kernel: scsi host2: ahci
Mar 25 19:09:46 kasumi-x61Arch kernel: ata1: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426100 irq 26 lpm-pol 0
Mar 25 19:09:46 kasumi-x61Arch kernel: ata2: DUMMY
Mar 25 19:09:46 kasumi-x61Arch kernel: ata3: DUMMY
Mar 25 19:09:46 kasumi-x61Arch kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Mar 25 19:09:46 kasumi-x61Arch kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Mar 25 19:09:46 kasumi-x61Arch kernel: uhci_hcd 0000:00:1a.0: detected 2 ports
Mar 25 19:09:46 kasumi-x61Arch kernel: uhci_hcd 0000:00:1a.0: irq 20, io port 0x00001860
Mar 25 19:09:46 kasumi-x61Arch kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08
Mar 25 19:09:46 kasumi-x61Arch kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 25 19:09:46 kasumi-x61Arch kernel: usb usb1: Product: UHCI Host Controller
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb1: Manufacturer: Linux 6.8.1-arch1-1 uhci_hcd
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb1: SerialNumber: 0000:00:1a.0
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 1-0:1.0: USB hub found
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 1-0:1.0: 2 ports detected
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1a.1: detected 2 ports
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1a.1: irq 21, io port 0x00001880
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb2: Product: UHCI Host Controller
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb2: Manufacturer: Linux 6.8.1-arch1-1 uhci_hcd
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb2: SerialNumber: 0000:00:1a.1
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 2-0:1.0: USB hub found
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 2-0:1.0: 2 ports detected
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1d.0: detected 2 ports
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1d.0: irq 16, io port 0x000018a0
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb3: Product: UHCI Host Controller
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb3: Manufacturer: Linux 6.8.1-arch1-1 uhci_hcd
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb3: SerialNumber: 0000:00:1d.0
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 3-0:1.0: USB hub found
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 3-0:1.0: 2 ports detected
Mar 25 19:09:47 kasumi-x61Arch kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
Mar 25 19:09:47 kasumi-x61Arch kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 4
Mar 25 19:09:47 kasumi-x61Arch kernel: ehci-pci 0000:00:1a.7: irq 22, io mem 0xf8426c00
Mar 25 19:09:47 kasumi-x61Arch kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb4: Product: EHCI Host Controller
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb4: Manufacturer: Linux 6.8.1-arch1-1 ehci_hcd
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb4: SerialNumber: 0000:00:1a.7
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 4-0:1.0: USB hub found
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 4-0:1.0: 4 ports detected
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 1-0:1.0: USB hub found
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 1-0:1.0: 2 ports detected
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 2-0:1.0: USB hub found
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 2-0:1.0: 2 ports detected
Mar 25 19:09:47 kasumi-x61Arch kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Mar 25 19:09:47 kasumi-x61Arch kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
Mar 25 19:09:47 kasumi-x61Arch kernel: ehci-pci 0000:00:1d.7: debug port 1
Mar 25 19:09:47 kasumi-x61Arch kernel: ehci-pci 0000:00:1d.7: irq 19, io mem 0xf8427000
Mar 25 19:09:47 kasumi-x61Arch kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb5: Product: EHCI Host Controller
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb5: Manufacturer: Linux 6.8.1-arch1-1 ehci_hcd
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb5: SerialNumber: 0000:00:1d.7
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 5-0:1.0: USB hub found
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 5-0:1.0: 4 ports detected
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 3-0:1.0: USB hub found
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 3-0:1.0: 2 ports detected
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1d.1: detected 2 ports
Mar 25 19:09:47 kasumi-x61Arch kernel: uhci_hcd 0000:00:1d.1: irq 17, io port 0x000018c0
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb6: Product: UHCI Host Controller
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb6: Manufacturer: Linux 6.8.1-arch1-1 uhci_hcd
Mar 25 19:09:47 kasumi-x61Arch kernel: usb usb6: SerialNumber: 0000:00:1d.1
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 6-0:1.0: USB hub found
Mar 25 19:09:47 kasumi-x61Arch kernel: hub 6-0:1.0: 2 ports detected
Mar 25 19:09:47 kasumi-x61Arch kernel: usbcore: registered new interface driver usbserial_generic
Mar 25 19:09:47 kasumi-x61Arch kernel: usbserial: USB Serial support registered for generic
Mar 25 19:09:47 kasumi-x61Arch kernel: rtc_cmos 00:02: RTC can wake from S4
Mar 25 19:09:47 kasumi-x61Arch kernel: rtc_cmos 00:02: registered as rtc0
Mar 25 19:09:47 kasumi-x61Arch kernel: rtc_cmos 00:02: setting system clock to 2024-03-26T01:09:39 UTC (1711415379)
Mar 25 19:09:47 kasumi-x61Arch kernel: rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Mar 25 19:09:47 kasumi-x61Arch kernel: intel_pstate: CPU model not supported
Mar 25 19:09:47 kasumi-x61Arch kernel: ledtrig-cpu: registered to indicate activity on CPUs
Mar 25 19:09:47 kasumi-x61Arch kernel: [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
Mar 25 19:09:47 kasumi-x61Arch kernel: fbcon: Deferring console take-over
Mar 25 19:09:47 kasumi-x61Arch kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
Mar 25 19:09:47 kasumi-x61Arch kernel: hid: raw HID events driver (C) Jiri Kosina
Mar 25 19:09:47 kasumi-x61Arch kernel: drop_monitor: Initializing network drop monitor service
Mar 25 19:09:47 kasumi-x61Arch kernel: NET: Registered PF_INET6 protocol family
Mar 25 19:09:47 kasumi-x61Arch kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 25 19:09:47 kasumi-x61Arch kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
Mar 25 19:09:47 kasumi-x61Arch kernel: ata1.00: ATA-10: SATA3 512GB SSD, T0910A0, max UDMA/133
Mar 25 19:09:47 kasumi-x61Arch kernel: ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
Mar 25 19:09:47 kasumi-x61Arch kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
Mar 25 19:09:47 kasumi-x61Arch kernel: ata1.00: configured for UDMA/133
Mar 25 19:09:47 kasumi-x61Arch kernel: scsi 0:0:0:0: Direct-Access     ATA      SATA3 512GB SSD  0A0  PQ: 0 ANSI: 5
Mar 25 19:09:47 kasumi-x61Arch kernel: sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
Mar 25 19:09:47 kasumi-x61Arch kernel: sd 0:0:0:0: [sda] Write Protect is off
Mar 25 19:09:47 kasumi-x61Arch kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Mar 25 19:09:47 kasumi-x61Arch kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 25 19:09:47 kasumi-x61Arch kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
Mar 25 19:09:47 kasumi-x61Arch kernel: Freeing initrd memory: 23492K
Mar 25 19:09:47 kasumi-x61Arch kernel:  sda: sda1 sda2 sda3 sda4
Mar 25 19:09:47 kasumi-x61Arch kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Mar 25 19:09:47 kasumi-x61Arch kernel: Segment Routing with IPv6
Mar 25 19:09:47 kasumi-x61Arch kernel: RPL Segment Routing with IPv6
Mar 25 19:09:47 kasumi-x61Arch kernel: In-situ OAM (IOAM) with IPv6
Mar 25 19:09:47 kasumi-x61Arch kernel: NET: Registered PF_PACKET protocol family
Mar 25 19:09:47 kasumi-x61Arch kernel: microcode: Current revision: 0x000000ba
Mar 25 19:09:47 kasumi-x61Arch kernel: IPI shorthand broadcast: enabled
Mar 25 19:09:47 kasumi-x61Arch kernel: registered taskstats version 1
Mar 25 19:09:47 kasumi-x61Arch kernel: Loading compiled-in X.509 certificates
Mar 25 19:09:47 kasumi-x61Arch kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 64cf7064f4c80a62153cad8348ab76793099fea1'
Mar 25 19:09:47 kasumi-x61Arch kernel: zswap: loaded using pool zstd/zsmalloc
Mar 25 19:09:47 kasumi-x61Arch kernel: Key type .fscrypt registered
Mar 25 19:09:47 kasumi-x61Arch kernel: Key type fscrypt-provisioning registered
Mar 25 19:09:47 kasumi-x61Arch kernel: PM:   Magic number: 0:654:155
Mar 25 19:09:47 kasumi-x61Arch kernel: acpi device:22: hash matches
Mar 25 19:09:47 kasumi-x61Arch kernel: RAS: Correctable Errors collector initialized.
Mar 25 19:09:47 kasumi-x61Arch kernel: Unstable clock detected, switching default tracing clock to "global"
                                       If you want to keep using the local clock, then add:
                                         "trace_clock=local"
                                       on the kernel command line
Mar 25 19:09:47 kasumi-x61Arch kernel: clk: Disabling unused clocks
Mar 25 19:09:47 kasumi-x61Arch kernel: Freeing unused decrypted memory: 2028K
Mar 25 19:09:47 kasumi-x61Arch kernel: Freeing unused kernel image (initmem) memory: 3432K
Mar 25 19:09:47 kasumi-x61Arch kernel: Write protecting the kernel read-only data: 30720k
Mar 25 19:09:47 kasumi-x61Arch kernel: Freeing unused kernel image (rodata/data gap) memory: 1424K
Mar 25 19:09:47 kasumi-x61Arch kernel: usb 1-1: new full-speed USB device number 2 using uhci_hcd
Mar 25 19:09:47 kasumi-x61Arch kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
Mar 25 19:09:47 kasumi-x61Arch kernel: rodata_test: all tests were successful
Mar 25 19:09:47 kasumi-x61Arch kernel: x86/mm: Checking user space page tables
Mar 25 19:09:47 kasumi-x61Arch kernel: usb 1-1: New USB device found, idVendor=0a5c, idProduct=2110, bcdDevice= 1.00
Mar 25 19:09:47 kasumi-x61Arch kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 25 19:09:47 kasumi-x61Arch kernel: usb 1-1: Product: BCM2045B
Mar 25 19:09:47 kasumi-x61Arch kernel: usb 1-1: Manufacturer: Broadcom Corp
Mar 25 19:09:47 kasumi-x61Arch kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
Mar 25 19:09:47 kasumi-x61Arch kernel: Run /init as init process
Mar 25 19:09:47 kasumi-x61Arch kernel:   with arguments:
Mar 25 19:09:47 kasumi-x61Arch kernel:     /init
Mar 25 19:09:47 kasumi-x61Arch kernel:   with environment:
Mar 25 19:09:47 kasumi-x61Arch kernel:     HOME=/
Mar 25 19:09:47 kasumi-x61Arch kernel:     TERM=linux
Mar 25 19:09:47 kasumi-x61Arch kernel:     BOOT_IMAGE=/boot/vmlinuz-linux
Mar 25 19:09:47 kasumi-x61Arch kernel: i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
Mar 25 19:09:47 kasumi-x61Arch kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 25 19:09:47 kasumi-x61Arch kernel: ata_piix 0000:00:1f.1: version 2.13
Mar 25 19:09:47 kasumi-x61Arch kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 25 19:09:47 kasumi-x61Arch kernel: scsi host3: ata_piix
Mar 25 19:09:47 kasumi-x61Arch kernel: scsi host4: ata_piix
Mar 25 19:09:47 kasumi-x61Arch kernel: ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 lpm-pol 0
Mar 25 19:09:47 kasumi-x61Arch kernel: ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 lpm-pol 0
Mar 25 19:09:47 kasumi-x61Arch kernel: usb 1-2: new full-speed USB device number 3 using uhci_hcd
Mar 25 19:09:47 kasumi-x61Arch kernel: sdhci: Secure Digital Host Controller Interface driver
Mar 25 19:09:47 kasumi-x61Arch kernel: sdhci: Copyright(c) Pierre Ossman
Mar 25 19:09:47 kasumi-x61Arch kernel: usb 1-2: New USB device found, idVendor=0483, idProduct=2016, bcdDevice= 0.01
Mar 25 19:09:47 kasumi-x61Arch kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 25 19:09:47 kasumi-x61Arch kernel: usb 1-2: Product: Biometric Coprocessor
Mar 25 19:09:47 kasumi-x61Arch kernel: usb 1-2: Manufacturer: STMicroelectronics
Mar 25 19:09:47 kasumi-x61Arch kernel: sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 21)
Mar 25 19:09:47 kasumi-x61Arch kernel: pci 0000:00:1e.0: enabling device (0005 -> 0007)
Mar 25 19:09:47 kasumi-x61Arch kernel: sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
Mar 25 19:09:47 kasumi-x61Arch kernel: mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
Mar 25 19:09:47 kasumi-x61Arch kernel: sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
Mar 25 19:09:47 kasumi-x61Arch kernel: mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
Mar 25 19:09:47 kasumi-x61Arch kernel: sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
Mar 25 19:09:47 kasumi-x61Arch kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Mar 25 19:09:47 kasumi-x61Arch kernel: pci 0000:00:00.0: Intel 965GM Chipset
Mar 25 19:09:47 kasumi-x61Arch kernel: pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
Mar 25 19:09:47 kasumi-x61Arch kernel: pci 0000:00:00.0: detected 8192K stolen memory
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 0000:00:02.0: [drm] Initialized overlay support.
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 0000:00:02.0: [drm] Skipping intel_backlight registration
Mar 25 19:09:47 kasumi-x61Arch kernel: [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1
Mar 25 19:09:47 kasumi-x61Arch kernel: ACPI: video: Video Device [VID] (multi-head: yes  rom: no  post: no)
Mar 25 19:09:47 kasumi-x61Arch kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
Mar 25 19:09:47 kasumi-x61Arch kernel: acpi device:01: registered as cooling_device2
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: display version: 4
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: cursor_needs_physical: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_cdclk_crawl: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_cdclk_squash: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_ddi: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_dp_mst: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_dsb: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_fpga_dbg: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_gmch: yes
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_hotplug: yes
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_hti: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_ipc: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_overlay: yes
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_psr: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_psr_hw_tracking: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: overlay_needs_physical: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: supports_tv: yes
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_hdcp: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_dmc: no
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 display info: has_dsc: no
Mar 25 19:09:47 kasumi-x61Arch kernel: fbcon: i915drmfb (fb0) is primary device
Mar 25 19:09:47 kasumi-x61Arch kernel: fbcon: Deferring console take-over
Mar 25 19:09:47 kasumi-x61Arch kernel: i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
Mar 25 19:09:47 kasumi-x61Arch kernel: fbcon: Taking over console
Mar 25 19:09:47 kasumi-x61Arch kernel: EXT4-fs (sda4): mounted filesystem c69e483a-e1f4-4653-a9f7-398f59cac32b r/w with ordered data mode. Quota mode: none.
Mar 25 19:09:47 kasumi-x61Arch kernel: Console: switching to colour frame buffer device 128x48
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: systemd 255.4-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Detected architecture x86-64.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Hostname set to <kasumi-x61Arch>.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: bpf-lsm: LSM BPF program attached
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Queued start job for default target Graphical Interface.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Created slice Slice /system/dirmngr.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Created slice Slice /system/getty.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Created slice Slice /system/gpg-agent.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Created slice Slice /system/gpg-agent-browser.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Created slice Slice /system/gpg-agent-extra.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Created slice Slice /system/gpg-agent-ssh.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Created slice Slice /system/keyboxd.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Created slice Slice /system/modprobe.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Created slice User and Session Slice.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Expecting device /dev/disk/by-uuid/e251fab9-c0d0-44fe-a0da-0fc8ae25bc78...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Reached target Local Encrypted Volumes.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Reached target Local Integrity Protected Volumes.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Reached target Remote File Systems.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Reached target Slice Units.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Reached target Local Verity Protected Volumes.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Listening on Device-mapper event daemon FIFOs.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Listening on LVM2 poll daemon socket.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Listening on Process Core Dump Socket.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Listening on Journal Socket (/dev/log).
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Listening on Journal Socket.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Listening on udev Control Socket.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Listening on udev Kernel Socket.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounting Huge Pages File System...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounting POSIX Message Queue File System...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounting Kernel Debug File System...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounting Kernel Trace File System...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Create List of Static Device Nodes...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Load Kernel Module configfs...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Load Kernel Module dm_mod...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Load Kernel Module drm...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Load Kernel Module fuse...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Load Kernel Module loop...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Journal Service...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Load Kernel Modules...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Mar 25 19:09:47 kasumi-x61Arch kernel: device-mapper: uevent: version 1.0.3
Mar 25 19:09:47 kasumi-x61Arch kernel: device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Remount Root and Kernel File Systems...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Mar 25 19:09:47 kasumi-x61Arch kernel: loop: module loaded
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Coldplug All udev Devices...
Mar 25 19:09:47 kasumi-x61Arch kernel: fuse: init (API version 7.39)
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounted Huge Pages File System.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounted POSIX Message Queue File System.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounted Kernel Debug File System.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounted Kernel Trace File System.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Create List of Static Device Nodes.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: modprobe@configfs.service: Deactivated successfully.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Load Kernel Module configfs.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Load Kernel Module dm_mod.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: modprobe@drm.service: Deactivated successfully.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Load Kernel Module drm.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: modprobe@fuse.service: Deactivated successfully.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Load Kernel Module fuse.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: modprobe@loop.service: Deactivated successfully.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Load Kernel Module loop.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounting FUSE Control File System...
Mar 25 19:09:47 kasumi-x61Arch systemd-journald[179]: Collecting audit messages is disabled.
Mar 25 19:09:47 kasumi-x61Arch kernel: EXT4-fs (sda4): re-mounted c69e483a-e1f4-4653-a9f7-398f59cac32b r/w. Quota mode: none.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounting Kernel Configuration File System...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Load Kernel Modules.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Remount Root and Kernel File Systems.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounted FUSE Control File System.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Load/Save OS Random Seed...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Apply Kernel Variables...
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Mounted Kernel Configuration File System.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Apply Kernel Variables.
Mar 25 19:09:47 kasumi-x61Arch kernel: random: crng init done
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Load/Save OS Random Seed.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Create System Users was skipped because no trigger condition checks were met.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Create Static Device Nodes in /dev...
Mar 25 19:09:47 kasumi-x61Arch systemd-journald[179]: Journal started
Mar 25 19:09:47 kasumi-x61Arch systemd-journald[179]: Runtime Journal (/run/log/journal/9500285b8b1840a7aafa7fbfa0bbc3dc) is 8.0M, max 192.3M, 184.3M free.
Mar 25 19:09:46 kasumi-x61Arch systemd-modules-load[180]: Inserted module 'crypto_user'
Mar 25 19:09:46 kasumi-x61Arch systemd-random-seed[188]: Kernel entropy pool is not initialized yet, waiting until it is.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Started Journal Service.
Mar 25 19:09:47 kasumi-x61Arch systemd[1]: Starting Flush Journal to Persistent Storage...
Mar 25 19:09:47 kasumi-x61Arch systemd-journald[179]: Time spent on flushing to /var/log/journal/9500285b8b1840a7aafa7fbfa0bbc3dc is 263.763ms for 862 entries.
Mar 25 19:09:47 kasumi-x61Arch systemd-journald[179]: System Journal (/var/log/journal/9500285b8b1840a7aafa7fbfa0bbc3dc) is 456.4M, max 4.0G, 3.5G free.
Mar 25 19:09:47 kasumi-x61Arch systemd-journald[179]: Received client request to flush runtime journal.

Last edited by Kasumin (2024-03-26 01:47:45)

seth · 2024-03-26 08:56:53

The laptop stays frozen and I did activate SysRq following the guide in the wiki

Ftr, it's not in the kernel commandline, but if you've added it via a sysctl you should be able to execute it while the system is running fine.

https://wiki.archlinux.org/title/Kdump - if that fails, it's most likely the HW.
Do you get this (only) on battery or (also) on external supply?

And while W7 didn't have the fast-start nonsense, you're not actively hibernating your windows to run linux, but shut down properly, do you?

Kasumin · 2024-03-27 02:01:59

Do you get this (only) on battery or (also) on external supply?

I got another freeze but this time it was on the external supply with no battery connected so it happens with both.
I tried the REISUB sequence again but no luck. I also installed kdumpst and I do see the

kdumpst: panic kexec loaded successfully

message in the journal so I assume it's installed correctly, however after hard shut off and powering on again, there's only a .img file in the /var/crash/kdumpst/ directory and nothing else, and I don't see the

kdumpst: logs saved in "/var/crash/kdumpst/logs"

message in the journal either.

if that fails, it's most likely the HW.

I still doubt it's hardware related because this doesn't happen under w7

you're not actively hibernating your windows to run linux, but shut down properly, do you?

I am shutting it down properly but I didn't check any of the fast-start configuration so if there is something there I'm not aware of, it might have something to do with it.

seth · 2024-03-27 15:40:14

I don't see the
kdumpst: logs saved in "/var/crash/kdumpst/logs"
message in the journal either.

https://wiki.archlinux.org/title/Kdump#Manual_steps

I still doubt it's hardware related because this doesn't happen under w7

Has this ever happened w/o picom running?
What's your uptime ratio for win/linux? ("The system freezes every couple of days, this has never happened during the 10 minutes a week where I'm booting windows" is obviously not very reliable data )

if there is something there I'm not aware of, it might have something to do with it

MS introduced fast-start (ie. relabled hibernation to simulate fast boots) w/ Win8 only.

Kasumin · 2024-03-29 03:11:41

What's your uptime ratio for win/linux?

I don't really use windows a lot but at least this week that I've been troubleshooting things, the longest it's gone without freezing in linux is ~3h, whereas in windows I used it for aprox. 5h without any issues.

is obviously not very reliable data

you're right so I decided to run some stress tests on windows (couldn't think of anything else to try and force a crash). I ran the stability test in Aida64Extreme for 2h with no issues, then ran the Furmark gpu test for 2h as well with no issues. After that I went back to arch to compile the kernel for kdump but it froze after almost 3h and I believe the stress tests were the same if not more demanding than compiling the kernel, so If not a hardware problem, at least I'm pretty sure it has nothing to do with system load.
By the way, can I use a different pc to compile the kernel? I don't think I will be able to in this one.

Has this ever happened w/o picom running?

I haven't tested that yet. Should I replace it with a different compositor or just go without compositor at all?

seth · 2024-03-29 07:43:07

By the way, can I use a different pc to compile the kernel?

Yes, but you don't have to compile a kernel, the defdault arch kernels have the necessary flags set.

zgrep -E '(DEBUG_INFO|CRASH_DUMP|PROC_VMCORE)=' /proc/config.gz

just go without compositor at all?

This one, though w/ the windows behavior and

It doesn't seem to be related to system load because it also happens while it's idle.

adding

intel_idle.max_cstate=1 i915.enable_dc=0 ahci.mobile_lpm_policy=1

to the https://wiki.archlinux.org/title/Kernel_parameters might be worth a shot, https://wiki.archlinux.org/title/Intel_ … Intel_CPUs

Kasumin · 2024-03-31 21:18:42

I disabled picom and left it overnight playing random videos and it didn't freeze after almost 12h, after that I enabled picom and it froze after ~1h so maybe it is related. Is there a more direct way to check if it is picom?

intel_idle.max_cstate=1 i915.enable_dc=0 ahci.mobile_lpm_policy=1

I tried the first one and it still froze (with picom enabled), with the other two I can't go past the startx login screen, it just keeps looping.

seth · 2024-03-31 22:23:46

It's not gonna be picom directly but something it triggers in the i915 kernel module, please post your picom.conf (maybe we can isolate the "compromising" feature)

Kasumin · 2024-03-31 22:34:42

I don't have a custom conf file. Only the default in /etc/xdg/picom.conf

#################################
#             Shadows           #
#################################


# Enabled client-side shadows on windows. Note desktop windows
# (windows with '_NET_WM_WINDOW_TYPE_DESKTOP') never get shadow,
# unless explicitly requested using the wintypes option.
#
# shadow = false
shadow = true;

# The blur radius for shadows, in pixels. (defaults to 12)
# shadow-radius = 12
shadow-radius = 7;

# The opacity of shadows. (0.0 - 1.0, defaults to 0.75)
# shadow-opacity = .75

# The left offset for shadows, in pixels. (defaults to -15)
# shadow-offset-x = -15
shadow-offset-x = -7;

# The top offset for shadows, in pixels. (defaults to -15)
# shadow-offset-y = -15
shadow-offset-y = -7;

# Red color value of shadow (0.0 - 1.0, defaults to 0).
# shadow-red = 0

# Green color value of shadow (0.0 - 1.0, defaults to 0).
# shadow-green = 0

# Blue color value of shadow (0.0 - 1.0, defaults to 0).
# shadow-blue = 0

# Hex string color value of shadow (#000000 - #FFFFFF, defaults to #000000). This option will override options set shadow-(red/green/blue)
# shadow-color = "#000000"

# Specify a list of conditions of windows that should have no shadow.
#
# examples:
#   shadow-exclude = "n:e:Notification";
#
# shadow-exclude = []
shadow-exclude = [
  "name = 'Notification'",
  "class_g = 'Conky'",
  "class_g ?= 'Notify-osd'",
  "class_g = 'Cairo-clock'",
  "_GTK_FRAME_EXTENTS@:c"
];

# Specify a list of conditions of windows that should have no shadow painted over, such as a dock window.
# clip-shadow-above = []

# Specify a X geometry that describes the region in which shadow should not
# be painted in, such as a dock window region. Use
#    shadow-exclude-reg = "x10+0+0"
# for example, if the 10 pixels on the bottom of the screen should not have shadows painted on.
#
# shadow-exclude-reg = ""

# Crop shadow of a window fully on a particular monitor to that monitor. This is
# currently implemented using the X RandR extension.
# crop-shadow-to-monitor = false


#################################
#           Fading              #
#################################


# Fade windows in/out when opening/closing and when opacity changes,
#  unless no-fading-openclose is used.
# fading = false
fading = true;

# Opacity change between steps while fading in. (0.01 - 1.0, defaults to 0.028)
# fade-in-step = 0.028
fade-in-step = 0.03;

# Opacity change between steps while fading out. (0.01 - 1.0, defaults to 0.03)
# fade-out-step = 0.03
fade-out-step = 0.03;

# The time between steps in fade step, in milliseconds. (> 0, defaults to 10)
# fade-delta = 10

# Specify a list of conditions of windows that should not be faded.
# fade-exclude = []

# Do not fade on window open/close.
# no-fading-openclose = false

# Do not fade destroyed ARGB windows with WM frame. Workaround of bugs in Openbox, Fluxbox, etc.
# no-fading-destroyed-argb = false


#################################
#   Transparency / Opacity      #
#################################


# Opacity of inactive windows. (0.1 - 1.0, defaults to 1.0)
# inactive-opacity = 1
inactive-opacity = 0.95;

# Opacity of window titlebars and borders. (0.1 - 1.0, disabled by default)
# frame-opacity = 1.0
frame-opacity = 0.9;

# Let inactive opacity set by -i override the '_NET_WM_WINDOW_OPACITY' values of windows.
# inactive-opacity-override = true
inactive-opacity-override = false;

# Default opacity for active windows. (0.0 - 1.0, defaults to 1.0)
# active-opacity = 1.0

# Dim inactive windows. (0.0 - 1.0, defaults to 0.0)
# inactive-dim = 0.0

# Specify a list of conditions of windows that should never be considered focused.
# focus-exclude = []
focus-exclude = [ "class_g = 'Cairo-clock'" ];

# Use fixed inactive dim value, instead of adjusting according to window opacity.
# inactive-dim-fixed = 1.0

# Specify a list of opacity rules, in the format `PERCENT:PATTERN`,
# like `50:name *= "Firefox"`. picom-trans is recommended over this.
# Note we don't make any guarantee about possible conflicts with other
# programs that set '_NET_WM_WINDOW_OPACITY' on frame or client windows.
# example:
#    opacity-rule = [ "80:class_g = 'URxvt'" ];
#
# opacity-rule = []


#################################
#           Corners             #
#################################

# Sets the radius of rounded window corners. When > 0, the compositor will
# round the corners of windows. Does not interact well with
# `transparent-clipping`.
corner-radius = 0

# Exclude conditions for rounded corners.
rounded-corners-exclude = [
  "window_type = 'dock'",
  "window_type = 'desktop'"
];


#################################
#     Background-Blurring       #
#################################


# Parameters for background blurring, see the *BLUR* section for more information.
# blur-method =
# blur-size = 12
#
# blur-deviation = false
#
# blur-strength = 5

# Blur background of semi-transparent / ARGB windows.
# Bad in performance, with driver-dependent behavior.
# The name of the switch may change without prior notifications.
#
# blur-background = false

# Blur background of windows when the window frame is not opaque.
# Implies:
#    blur-background
# Bad in performance, with driver-dependent behavior. The name may change.
#
# blur-background-frame = false


# Use fixed blur strength rather than adjusting according to window opacity.
# blur-background-fixed = false


# Specify the blur convolution kernel, with the following format:
# example:
#   blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1";
#
# blur-kern = ""
blur-kern = "3x3box";


# Exclude conditions for background blur.
# blur-background-exclude = []
blur-background-exclude = [
  "window_type = 'dock'",
  "window_type = 'desktop'",
  "_GTK_FRAME_EXTENTS@:c"
];

#################################
#       General Settings        #
#################################

# Enable remote control via D-Bus. See the man page for more details.
# dbus = true

# Daemonize process. Fork to background after initialization. Causes issues with certain (badly-written) drivers.
# daemon = false

# Specify the backend to use: `xrender`, `glx`, `egl` or `xr_glx_hybrid`.
# `xrender` is the default one.
#
# backend = "glx"
backend = "xrender";

# Use higher precision during rendering, and apply dither when presenting the
# rendered screen. Reduces banding artifacts, but might cause performance
# degradation. Only works with OpenGL.
dithered-present = false;

# Enable/disable VSync.
# vsync = false
vsync = true;

# Try to detect WM windows (a non-override-redirect window with no
# child that has 'WM_STATE') and mark them as active.
#
# mark-wmwin-focused = false
mark-wmwin-focused = true;

# Mark override-redirect windows that doesn't have a child window with 'WM_STATE' focused.
# mark-ovredir-focused = false
mark-ovredir-focused = true;

# Try to detect windows with rounded corners and don't consider them
# shaped windows. The accuracy is not very high, unfortunately.
#
# detect-rounded-corners = false
detect-rounded-corners = true;

# Detect '_NET_WM_WINDOW_OPACITY' on client windows, useful for window managers
# not passing '_NET_WM_WINDOW_OPACITY' of client windows to frame windows.
#
# detect-client-opacity = false
detect-client-opacity = true;

# Use EWMH '_NET_ACTIVE_WINDOW' to determine currently focused window,
# rather than listening to 'FocusIn'/'FocusOut' event. Might have more accuracy,
# provided that the WM supports it.
#
# use-ewmh-active-win = false

# Unredirect all windows if a full-screen opaque window is detected,
# to maximize performance for full-screen windows. Known to cause flickering
# when redirecting/unredirecting windows.
#
# unredir-if-possible = false

# Delay before unredirecting the window, in milliseconds. Defaults to 0.
# unredir-if-possible-delay = 0

# Conditions of windows that shouldn't be considered full-screen for unredirecting screen.
# unredir-if-possible-exclude = []

# Use 'WM_TRANSIENT_FOR' to group windows, and consider windows
# in the same group focused at the same time.
#
# detect-transient = false
detect-transient = true;

# Use 'WM_CLIENT_LEADER' to group windows, and consider windows in the same
# group focused at the same time. This usually means windows from the same application
# will be considered focused or unfocused at the same time.
# 'WM_TRANSIENT_FOR' has higher priority if detect-transient is enabled, too.
#
# detect-client-leader = false

# Resize damaged region by a specific number of pixels.
# A positive value enlarges it while a negative one shrinks it.
# If the value is positive, those additional pixels will not be actually painted
# to screen, only used in blur calculation, and such. (Due to technical limitations,
# with use-damage, those pixels will still be incorrectly painted to screen.)
# Primarily used to fix the line corruption issues of blur,
# in which case you should use the blur radius value here
# (e.g. with a 3x3 kernel, you should use `--resize-damage 1`,
# with a 5x5 one you use `--resize-damage 2`, and so on).
# May or may not work with *--glx-no-stencil*. Shrinking doesn't function correctly.
#
# resize-damage = 1

# Specify a list of conditions of windows that should be painted with inverted color.
# Resource-hogging, and is not well tested.
#
# invert-color-include = []

# GLX backend: Avoid using stencil buffer, useful if you don't have a stencil buffer.
# Might cause incorrect opacity when rendering transparent content (but never
# practically happened) and may not work with blur-background.
# My tests show a 15% performance boost. Recommended.
#
glx-no-stencil = true;

# GLX backend: Avoid rebinding pixmap on window damage.
# Probably could improve performance on rapid window content changes,
# but is known to break things on some drivers (LLVMpipe, xf86-video-intel, etc.).
# Recommended if it works.
#
# glx-no-rebind-pixmap = false

# Disable the use of damage information.
# This cause the whole screen to be redrawn every time, instead of the part of the screen
# has actually changed. Potentially degrades the performance, but might fix some artifacts.
# The opposing option is use-damage
#
# no-use-damage = false
use-damage = true;

# Use X Sync fence to sync clients' draw calls, to make sure all draw
# calls are finished before picom starts drawing. Needed on nvidia-drivers
# with GLX backend for some users.
#
# xrender-sync-fence = false

# GLX backend: Use specified GLSL fragment shader for rendering window
# contents. Read the man page for a detailed explanation of the interface.
#
# window-shader-fg = "default"

# Use rules to set per-window shaders. Syntax is SHADER_PATH:PATTERN, similar
# to opacity-rule. SHADER_PATH can be "default". This overrides window-shader-fg.
#
# window-shader-fg-rule = [
#   "my_shader.frag:window_type != 'dock'"
# ]

# Force all windows to be painted with blending. Useful if you
# have a glx-fshader-win that could turn opaque pixels transparent.
#
# force-win-blend = false

# Do not use EWMH to detect fullscreen windows.
# Reverts to checking if a window is fullscreen based only on its size and coordinates.
#
# no-ewmh-fullscreen = false

# Dimming bright windows so their brightness doesn't exceed this set value.
# Brightness of a window is estimated by averaging all pixels in the window,
# so this could comes with a performance hit.
# Setting this to 1.0 disables this behaviour. Requires --use-damage to be disabled. (default: 1.0)
#
# max-brightness = 1.0

# Make transparent windows clip other windows like non-transparent windows do,
# instead of blending on top of them.
#
# transparent-clipping = false

# Specify a list of conditions of windows that should never have transparent
# clipping applied. Useful for screenshot tools, where you need to be able to
# see through transparent parts of the window.
#
# transparent-clipping-exclude = []

# Set the log level. Possible values are:
#  "trace", "debug", "info", "warn", "error"
# in increasing level of importance. Case doesn't matter.
# If using the "TRACE" log level, it's better to log into a file
# using *--log-file*, since it can generate a huge stream of logs.
#
# log-level = "debug"
log-level = "warn";

# Set the log file.
# If *--log-file* is never specified, logs will be written to stderr.
# Otherwise, logs will to written to the given file, though some of the early
# logs might still be written to the stderr.
# When setting this option from the config file, it is recommended to use an absolute path.
#
# log-file = "/path/to/your/log/file"

# Show all X errors (for debugging)
# show-all-xerrors = false

# Write process ID to a file.
# write-pid-path = "/path/to/your/log/file"

# Window type settings
#
# 'WINDOW_TYPE' is one of the 15 window types defined in EWMH standard:
#     "unknown", "desktop", "dock", "toolbar", "menu", "utility",
#     "splash", "dialog", "normal", "dropdown_menu", "popup_menu",
#     "tooltip", "notification", "combo", and "dnd".
#
# Following per window-type options are available: ::
#
#   fade, shadow:::
#     Controls window-type-specific shadow and fade settings.
#
#   opacity:::
#     Controls default opacity of the window type.
#
#   focus:::
#     Controls whether the window of this type is to be always considered focused.
#     (By default, all window types except "normal" and "dialog" has this on.)
#
#   full-shadow:::
#     Controls whether shadow is drawn under the parts of the window that you
#     normally won't be able to see. Useful when the window has parts of it
#     transparent, and you want shadows in those areas.
#
#   clip-shadow-above:::
#     Controls whether shadows that would have been drawn above the window should
#     be clipped. Useful for dock windows that should have no shadow painted on top.
#
#   redir-ignore:::
#     Controls whether this type of windows should cause screen to become
#     redirected again after been unredirected. If you have unredir-if-possible
#     set, and doesn't want certain window to cause unnecessary screen redirection,
#     you can set this to `true`.
#
wintypes:
{
  tooltip = { fade = true; shadow = true; opacity = 0.75; focus = true; full-shadow = false; };
  dock = { shadow = false; clip-shadow-above = true; }
  dnd = { shadow = false; }
  popup_menu = { opacity = 0.8; }
  dropdown_menu = { opacity = 0.8; }
};

seth · 2024-03-31 22:46:05

Do you have more luck w/ the glx backend (sidestepping the DDX acceleration)
Speaking of which, please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

Last edited by seth (2024-03-31 22:46:20)

Kasumin · 2024-03-31 23:09:32

I will try glx and see how it goes.
This is the last log registered.

[    64.129] 
X.Org X Server 1.21.1.11
X Protocol Version 11, Revision 0
[    64.129] Current Operating System: Linux kasumi-x61Arch 6.8.2-arch2-1 #1 SMP PREEMPT_DYNAMIC Thu, 28 Mar 2024 17:06:35 +0000 x86_64
[    64.129] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c69e483a-e1f4-4653-a9f7-398f59cac32b rw crashkernel=256M loglevel=3 quiet
[    64.130]  
[    64.130] Current version of pixman: 0.43.4
[    64.130] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    64.130] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    64.131] (==) Log file: "/home/kasumi/.local/share/xorg/Xorg.0.log", Time: Sun Mar 31 15:12:01 2024
[    64.135] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    64.136] (==) No Layout section.  Using the first Screen section.
[    64.136] (==) No screen section available. Using defaults.
[    64.136] (**) |-->Screen "Default Screen Section" (0)
[    64.136] (**) |   |-->Monitor "<default monitor>"
[    64.136] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    64.136] (==) Automatically adding devices
[    64.136] (==) Automatically enabling devices
[    64.136] (==) Automatically adding GPU devices
[    64.136] (==) Automatically binding GPU devices
[    64.136] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    64.136] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    64.136] 	Entry deleted from font path.
[    64.137] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    64.137] 	Entry deleted from font path.
[    64.137] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    64.137] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    64.137] 	Entry deleted from font path.
[    64.137] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    64.137] 	Entry deleted from font path.
[    64.137] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    64.137] 	Entry deleted from font path.
[    64.137] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    64.137] 	Entry deleted from font path.
[    64.137] (==) FontPath set to:
	
[    64.137] (==) ModulePath set to "/usr/lib/xorg/modules"
[    64.137] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    64.137] (II) Module ABI versions:
[    64.137] 	X.Org ANSI C Emulation: 0.4
[    64.137] 	X.Org Video Driver: 25.2
[    64.137] 	X.Org XInput driver : 24.4
[    64.137] 	X.Org Server Extension : 10.0
[    64.137] (++) using VT number 1

[    64.139] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[    64.140] (II) xfree86: Adding drm device (/dev/dri/card1)
[    64.140] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[    64.141] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[    64.146] (--) PCI:*(0@0:2:0) 8086:2a02:17aa:20b5 rev 12, Mem @ 0xf8000000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/131072
[    64.146] (--) PCI: (0@0:2:1) 8086:2a03:17aa:20b5 rev 12, Mem @ 0xf8100000/1048576
[    64.146] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    64.146] (II) LoadModule: "glx"
[    64.149] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    64.164] (II) Module glx: vendor="X.Org Foundation"
[    64.164] 	compiled for 1.21.1.11, module version = 1.0.0
[    64.164] 	ABI class: X.Org Server Extension, version 10.0
[    64.164] (==) Matched intel as autoconfigured driver 0
[    64.164] (==) Matched modesetting as autoconfigured driver 1
[    64.164] (==) Matched fbdev as autoconfigured driver 2
[    64.164] (==) Matched vesa as autoconfigured driver 3
[    64.164] (==) Assigned the driver to the xf86ConfigLayout
[    64.164] (II) LoadModule: "intel"
[    64.164] (WW) Warning, couldn't open module intel
[    64.165] (EE) Failed to load module "intel" (module does not exist, 0)
[    64.165] (II) LoadModule: "modesetting"
[    64.165] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    64.171] (II) Module modesetting: vendor="X.Org Foundation"
[    64.171] 	compiled for 1.21.1.11, module version = 1.21.1
[    64.171] 	Module class: X.Org Video Driver
[    64.171] 	ABI class: X.Org Video Driver, version 25.2
[    64.171] (II) LoadModule: "fbdev"
[    64.171] (WW) Warning, couldn't open module fbdev
[    64.171] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    64.171] (II) LoadModule: "vesa"
[    64.171] (WW) Warning, couldn't open module vesa
[    64.171] (EE) Failed to load module "vesa" (module does not exist, 0)
[    64.171] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    64.171] (II) modeset(0): using drv /dev/dri/card1
[    64.171] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    64.171] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    64.171] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    64.171] (==) modeset(0): RGB weight 888
[    64.171] (==) modeset(0): Default visual is TrueColor
[    64.171] (II) Loading sub module "glamoregl"
[    64.171] (II) LoadModule: "glamoregl"
[    64.171] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    64.183] (II) Module glamoregl: vendor="X.Org Foundation"
[    64.183] 	compiled for 1.21.1.11, module version = 1.0.1
[    64.183] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    64.498] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) 965GM (CL)
[    64.499] (II) modeset(0): glamor initialized
[    64.499] (==) modeset(0): VariableRefresh: disabled
[    64.499] (==) modeset(0): AsyncFlipSecondaries: disabled
[    64.499] (II) modeset(0): Output LVDS-1 has no monitor section
[    64.507] (II) modeset(0): Output VGA-1 has no monitor section
[    64.507] (II) modeset(0): EDID for output LVDS-1
[    64.507] (II) modeset(0): Manufacturer: LEN  Model: 4000  Serial#: 0
[    64.507] (II) modeset(0): Year: 2005  Week: 0
[    64.507] (II) modeset(0): EDID Version: 1.3
[    64.507] (II) modeset(0): Digital Display Input
[    64.507] (II) modeset(0): Max Image Size [cm]: horiz.: 25  vert.: 18
[    64.507] (II) modeset(0): Gamma: 2.20
[    64.508] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[    64.508] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    64.508] (II) modeset(0): First detailed timing is preferred mode
[    64.508] (II) modeset(0): redX: 0.569 redY: 0.342   greenX: 0.312 greenY: 0.544
[    64.508] (II) modeset(0): blueX: 0.149 blueY: 0.132   whiteX: 0.313 whiteY: 0.329
[    64.508] (II) modeset(0): Supported established timings:
[    64.508] (II) modeset(0): 640x480@60Hz
[    64.508] (II) modeset(0): 800x600@60Hz
[    64.508] (II) modeset(0): 1024x768@60Hz
[    64.508] (II) modeset(0): Manufacturer's mask: 0
[    64.508] (II) modeset(0): Supported detailed timing:
[    64.508] (II) modeset(0): clock: 54.2 MHz   Image Size:  246 x 185 mm
[    64.508] (II) modeset(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[    64.508] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[    64.508] (II) modeset(0): Supported detailed timing:
[    64.508] (II) modeset(0): clock: 43.3 MHz   Image Size:  246 x 185 mm
[    64.508] (II) modeset(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[    64.508] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[    64.508] (II) modeset(0): Unknown vendor-specific block f
[    64.508] (II) modeset(0):  LTN121XJ-L07
[    64.508] (II) modeset(0): EDID (in hex):
[    64.508] (II) modeset(0): 	00ffffffffffff0030ae004000000000
[    64.508] (II) modeset(0): 	000f010380191278eaed7591574f8b26
[    64.508] (II) modeset(0): 	21505421080001010101010101010101
[    64.508] (II) modeset(0): 	01010101010128150040410026301888
[    64.508] (II) modeset(0): 	3600f6b900000018ed10004041002630
[    64.508] (II) modeset(0): 	18883600f6b9000000180000000f0061
[    64.508] (II) modeset(0): 	43326143280f01004ca3584a000000fe
[    64.508] (II) modeset(0): 	004c544e313231584a2d4c30370a0000
[    64.508] (II) modeset(0): Printing probed modes for output LVDS-1
[    64.508] (II) modeset(0): Modeline "1024x768"x50.0   54.16  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (40.3 kHz eP)
[    64.508] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    64.508] (II) modeset(0): Modeline "1024x768"x40.0   43.33  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (32.2 kHz e)
[    64.508] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    64.508] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    64.508] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    64.508] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    64.508] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    64.508] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    64.508] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    64.508] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    64.508] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    64.508] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    64.508] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    64.508] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    64.508] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    64.508] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    64.508] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    64.508] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    64.508] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    64.508] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    64.508] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    64.508] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    64.508] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    64.508] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    64.508] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    64.508] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    64.509] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    64.509] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    64.509] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    64.509] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    64.509] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    64.509] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    64.509] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    64.509] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    64.509] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    64.509] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    64.509] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    64.509] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    64.509] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    64.509] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    64.509] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    64.509] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    64.509] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    64.509] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    64.509] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    64.509] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    64.509] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    64.509] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    64.509] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    64.509] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    64.509] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    64.509] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    64.509] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    64.509] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    64.516] (II) modeset(0): EDID for output VGA-1
[    64.516] (II) modeset(0): Output LVDS-1 connected
[    64.516] (II) modeset(0): Output VGA-1 disconnected
[    64.516] (II) modeset(0): Using exact sizes for initial modes
[    64.516] (II) modeset(0): Output LVDS-1 using initial mode 1024x768 +0+0
[    64.516] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    64.517] (==) modeset(0): DPI set to (96, 96)
[    64.517] (II) Loading sub module "fb"
[    64.517] (II) LoadModule: "fb"
[    64.517] (II) Module "fb" already built-in
[    64.624] (==) modeset(0): Backing store enabled
[    64.624] (==) modeset(0): Silken mouse enabled
[    64.658] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    64.658] (==) modeset(0): DPMS enabled
[    64.658] (II) modeset(0): [DRI2] Setup complete
[    64.658] (II) modeset(0): [DRI2]   DRI driver: crocus
[    64.658] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[    64.658] (II) Initializing extension Generic Event Extension
[    64.659] (II) Initializing extension SHAPE
[    64.659] (II) Initializing extension MIT-SHM
[    64.659] (II) Initializing extension XInputExtension
[    64.659] (II) Initializing extension XTEST
[    64.659] (II) Initializing extension BIG-REQUESTS
[    64.660] (II) Initializing extension SYNC
[    64.660] (II) Initializing extension XKEYBOARD
[    64.660] (II) Initializing extension XC-MISC
[    64.660] (II) Initializing extension SECURITY
[    64.661] (II) Initializing extension XFIXES
[    64.661] (II) Initializing extension RENDER
[    64.661] (II) Initializing extension RANDR
[    64.662] (II) Initializing extension COMPOSITE
[    64.662] (II) Initializing extension DAMAGE
[    64.662] (II) Initializing extension MIT-SCREEN-SAVER
[    64.662] (II) Initializing extension DOUBLE-BUFFER
[    64.663] (II) Initializing extension RECORD
[    64.663] (II) Initializing extension DPMS
[    64.663] (II) Initializing extension Present
[    64.663] (II) Initializing extension DRI3
[    64.663] (II) Initializing extension X-Resource
[    64.664] (II) Initializing extension XVideo
[    64.664] (II) Initializing extension XVideo-MotionCompensation
[    64.664] (II) Initializing extension GLX
[    64.675] (II) AIGLX: Loaded and initialized crocus
[    64.675] (II) GLX: Initialized DRI2 GL provider for screen 0
[    64.675] (II) Initializing extension XFree86-VidModeExtension
[    64.675] (II) Initializing extension XFree86-DGA
[    64.675] (II) Initializing extension XFree86-DRI
[    64.675] (II) Initializing extension DRI2
[    64.676] (II) modeset(0): Damage tracking initialized
[    64.676] (II) modeset(0): Setting screen physical size to 270 x 203
[    64.795] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    64.795] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    64.795] (II) LoadModule: "libinput"
[    64.795] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    64.803] (II) Module libinput: vendor="X.Org Foundation"
[    64.803] 	compiled for 1.21.1.8, module version = 1.4.0
[    64.803] 	Module class: X.Org XInput Driver
[    64.803] 	ABI class: X.Org XInput driver, version 24.4
[    64.803] (II) Using input driver 'libinput' for 'Power Button'
[    64.804] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0
[    64.804] (**) Power Button: always reports core events
[    64.804] (**) Option "Device" "/dev/input/event2"
[    64.820] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    64.820] (II) event2  - Power Button: device is a keyboard
[    64.821] (II) event2  - Power Button: device removed
[    64.821] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    64.821] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    64.822] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    64.822] (II) event2  - Power Button: device is a keyboard
[    64.823] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    64.823] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    64.823] (II) Using input driver 'libinput' for 'Video Bus'
[    64.825] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 30 paused 0
[    64.825] (**) Video Bus: always reports core events
[    64.825] (**) Option "Device" "/dev/input/event4"
[    64.826] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    64.827] (II) event4  - Video Bus: device is a keyboard
[    64.827] (II) event4  - Video Bus: device removed
[    64.827] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event4"
[    64.827] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    64.829] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    64.829] (II) event4  - Video Bus: device is a keyboard
[    64.830] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    64.830] (II) No input driver specified, ignoring this device.
[    64.830] (II) This device may have been added with another device file.
[    64.831] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    64.831] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    64.831] (II) Using input driver 'libinput' for 'Sleep Button'
[    64.832] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 31 paused 0
[    64.832] (**) Sleep Button: always reports core events
[    64.832] (**) Option "Device" "/dev/input/event1"
[    64.833] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    64.833] (II) event1  - Sleep Button: device is a keyboard
[    64.834] (II) event1  - Sleep Button: device removed
[    64.834] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    64.834] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    64.835] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    64.835] (II) event1  - Sleep Button: device is a keyboard
[    64.837] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event9)
[    64.837] (II) No input driver specified, ignoring this device.
[    64.837] (II) This device may have been added with another device file.
[    64.838] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[    64.838] (II) No input driver specified, ignoring this device.
[    64.838] (II) This device may have been added with another device file.
[    64.838] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[    64.838] (II) No input driver specified, ignoring this device.
[    64.838] (II) This device may have been added with another device file.
[    64.839] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    64.839] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    64.839] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    64.840] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 32 paused 0
[    64.840] (**) AT Translated Set 2 keyboard: always reports core events
[    64.840] (**) Option "Device" "/dev/input/event3"
[    64.842] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    64.842] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    64.843] (II) event3  - AT Translated Set 2 keyboard: device removed
[    64.843] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    64.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    64.845] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    64.845] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    64.847] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event7)
[    64.847] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[    64.847] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[    64.847] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 33 paused 0
[    64.847] (**) TPPS/2 IBM TrackPoint: always reports core events
[    64.847] (**) Option "Device" "/dev/input/event7"
[    64.849] (II) event7  - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    64.850] (II) event7  - TPPS/2 IBM TrackPoint: device is a pointer
[    64.851] (II) event7  - TPPS/2 IBM TrackPoint: device removed
[    64.851] (II) libinput: TPPS/2 IBM TrackPoint: Step value 0 was provided, libinput Fallback acceleration function is used.
[    64.851] (II) libinput: TPPS/2 IBM TrackPoint: Step value 0 was provided, libinput Fallback acceleration function is used.
[    64.851] (II) libinput: TPPS/2 IBM TrackPoint: Step value 0 was provided, libinput Fallback acceleration function is used.
[    64.851] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[    64.851] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 10)
[    64.851] (**) Option "AccelerationScheme" "none"
[    64.851] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[    64.851] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    64.851] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    64.853] (II) event7  - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    64.853] (II) event7  - TPPS/2 IBM TrackPoint: device is a pointer
[    64.855] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
[    64.855] (II) No input driver specified, ignoring this device.
[    64.855] (II) This device may have been added with another device file.
[    64.856] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    64.856] (II) No input driver specified, ignoring this device.
[    64.856] (II) This device may have been added with another device file.
[    64.862] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[    64.862] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[    64.862] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[    64.863] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 34 paused 0
[    64.863] (**) ThinkPad Extra Buttons: always reports core events
[    64.863] (**) Option "Device" "/dev/input/event6"
[    64.864] (II) event6  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    64.864] (II) event6  - ThinkPad Extra Buttons: device is a keyboard
[    64.865] (II) event6  - ThinkPad Extra Buttons: device removed
[    64.865] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input8/event6"
[    64.865] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 11)
[    64.866] (II) event6  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    64.866] (II) event6  - ThinkPad Extra Buttons: device is a keyboard

seth · 2024-03-31 23:13:13

So modesetting/glamor.
You *might* be better off w/ xf86-video-intel and mesa-amber (but that needed to be tested)

Kasumin · 2024-04-01 00:05:06

Then should I remove mesa and install those two?
Also I made a custom picom.conf to use glx but I'm getting this error.

$ picom --show-all-xerrors
[ 03/31/2024 18:00:26.972 x_log_error WARN ] X error 167 GLX_BAD_FB_CONFIG request 152 minor 0 serial 306
[ 03/31/2024 18:00:26.973 glx_init ERROR ] Failed to get GLX context.
[ 03/31/2024 18:00:26.974 initialize_backend FATAL ERROR ] Failed to initialize backend, aborting...
[ 03/31/2024 18:00:26.974 draw_callback_impl FATAL ERROR ] Pre-render preparation has failed, exiting...

I just uncommented backend = "glx" and commented # backend = "xrender"; and left everything else intact from the default one.

seth · 2024-04-01 00:12:31

What is the output of "glxinfo -b"?
Installing mesa-amber will replace mesa, don't try to remove the latter. It's dependency for a lot of stuff.

Kasumin · 2024-04-01 00:16:13

I'll install them then

What is the output of "glxinfo -b"?

$ glxinfo -b
bash: glxinfo: command not found

seth · 2024-04-01 00:17:22

It's in mesa-utils

Kasumin · 2024-04-01 00:23:35

Now the output is

$ glxinfo -b
33

seth · 2024-04-01 00:51:21

Sorry, typo. It's getting very late… "glxinfo -B"

Kasumin · 2024-04-01 02:10:22

sorry for taking your time. This is the output

$ glxinfo -B
name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: Intel Open Source Technology Center (0x8086)
    Device: Mesa DRI Intel(R) 965GM (CL) (0x2a02)
    Version: 21.3.9
    Accelerated: yes
    Video memory: 384MB
    Unified memory: yes
    Preferred profile: compat (0x2)
    Max core profile version: 0.0
    Max compat profile version: 2.1
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 2.0
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) 965GM (CL)
OpenGL version string: 2.1 Mesa 21.3.9-arch.6 Amber
OpenGL shading language version string: 1.20

OpenGL ES profile version string: OpenGL ES 2.0 Mesa 21.3.9-arch.6 Amber
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.0.16

Arch Linux

#1 2024-03-21 01:30:07

random freezes, forced to hard shut down

#2 2024-03-21 05:11:37

Re: random freezes, forced to hard shut down

#3 2024-03-21 08:02:42

Re: random freezes, forced to hard shut down

#4 2024-03-21 09:56:30

Re: random freezes, forced to hard shut down

#5 2024-03-21 15:23:43

Re: random freezes, forced to hard shut down

#6 2024-03-22 17:06:58

Re: random freezes, forced to hard shut down

#7 2024-03-26 01:24:08

Re: random freezes, forced to hard shut down

#8 2024-03-26 08:56:53

Re: random freezes, forced to hard shut down

#9 2024-03-27 02:01:59

Re: random freezes, forced to hard shut down

#10 2024-03-27 15:40:14

Re: random freezes, forced to hard shut down

#11 2024-03-29 03:11:41

Re: random freezes, forced to hard shut down

#12 2024-03-29 07:43:07

Re: random freezes, forced to hard shut down

#13 2024-03-31 21:18:42

Re: random freezes, forced to hard shut down

#14 2024-03-31 22:23:46

Re: random freezes, forced to hard shut down

#15 2024-03-31 22:34:42

Re: random freezes, forced to hard shut down

#16 2024-03-31 22:46:05

Re: random freezes, forced to hard shut down

#17 2024-03-31 23:09:32

Re: random freezes, forced to hard shut down

#18 2024-03-31 23:13:13

Re: random freezes, forced to hard shut down

#19 2024-04-01 00:05:06

Re: random freezes, forced to hard shut down

#20 2024-04-01 00:12:31

Re: random freezes, forced to hard shut down

#21 2024-04-01 00:16:13

Re: random freezes, forced to hard shut down

#22 2024-04-01 00:17:22

Re: random freezes, forced to hard shut down

#23 2024-04-01 00:23:35

Re: random freezes, forced to hard shut down

#24 2024-04-01 00:51:21

Re: random freezes, forced to hard shut down

#25 2024-04-01 02:10:22

Re: random freezes, forced to hard shut down

Board footer