You are not logged in.

#1 2024-04-02 16:45:31

t-moe
Member
Registered: 2024-04-02
Posts: 4

[SOLVED] wlp3s0:deauthenticating by local choice(Reason:1=UNSPECIFIED)

I noticed, that recently my device cannot connect to certain WIFI networks.

I'm using wifi-menu to generate profiles for netctl. For example lets assume I'm trying to connect to a wpa2 hotspot of my pixel 7 phone.

The command `sudo netctl switch-to wlp3s0-Pixel_2567` fails and if I look at the output of `journalctl -fe` I see:

Apr 02 18:26:12 timo-archlap kernel: wlp3s0: authenticate with 4e:2b:3f:5b:f5:df (local address=8c:70:5a:ff:32:74)
Apr 02 18:26:12 timo-archlap kernel: wlp3s0: send auth to 4e:2b:3f:5b:f5:df (try 1/3)
Apr 02 18:26:12 timo-archlap kernel: wlp3s0: authenticated
Apr 02 18:26:12 timo-archlap kernel: wlp3s0: associate with 4e:2b:3f:5b:f5:df (try 1/3)
Apr 02 18:26:12 timo-archlap kernel: wlp3s0: RX AssocResp from 4e:2b:3f:5b:f5:df (capab=0x431 status=0 aid=1)
Apr 02 18:26:12 timo-archlap kernel: wlp3s0: associated
Apr 02 18:26:12 timo-archlap kernel: wlp3s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by 4e:2b:3f:5b:f5:df
Apr 02 18:26:12 timo-archlap kernel: wlp3s0: deauthenticating from 4e:2b:3f:5b:f5:df by local choice (Reason: 1=UNSPECIFIED)
Apr 02 18:26:15 timo-archlap kernel: wlp3s0: authenticate with 4e:2b:3f:5b:f5:df (local address=8c:70:5a:ff:32:74)
Apr 02 18:26:15 timo-archlap kernel: wlp3s0: send auth to 4e:2b:3f:5b:f5:df (try 1/3)
Apr 02 18:26:15 timo-archlap kernel: wlp3s0: authenticated
Apr 02 18:26:15 timo-archlap kernel: wlp3s0: associate with 4e:2b:3f:5b:f5:df (try 1/3)
Apr 02 18:26:15 timo-archlap kernel: wlp3s0: RX AssocResp from 4e:2b:3f:5b:f5:df (capab=0x431 status=0 aid=1)
Apr 02 18:26:15 timo-archlap kernel: wlp3s0: associated
Apr 02 18:26:15 timo-archlap kernel: wlp3s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by 4e:2b:3f:5b:f5:df
Apr 02 18:26:15 timo-archlap kernel: wlp3s0: deauthenticating from 4e:2b:3f:5b:f5:df by local choice (Reason: 1=UNSPECIFIED)
Apr 02 18:26:19 timo-archlap kernel: wlp3s0: authenticate with 4e:2b:3f:5b:f5:df (local address=8c:70:5a:ff:32:74)
Apr 02 18:26:19 timo-archlap kernel: wlp3s0: send auth to 4e:2b:3f:5b:f5:df (try 1/3)
Apr 02 18:26:19 timo-archlap kernel: wlp3s0: authenticated
Apr 02 18:26:19 timo-archlap kernel: wlp3s0: associate with 4e:2b:3f:5b:f5:df (try 1/3)
Apr 02 18:26:19 timo-archlap kernel: wlp3s0: RX AssocResp from 4e:2b:3f:5b:f5:df (capab=0x431 status=0 aid=1)
Apr 02 18:26:19 timo-archlap kernel: wlp3s0: associated
Apr 02 18:26:19 timo-archlap kernel: wlp3s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by 4e:2b:3f:5b:f5:df
Apr 02 18:26:19 timo-archlap kernel: wlp3s0: deauthenticating from 4e:2b:3f:5b:f5:df by local choice (Reason: 1=UNSPECIFIED)
Apr 02 18:26:21 timo-archlap network[837]: WPA association/authentication failed for interface 'wlp3s0'
Apr 02 18:26:22 timo-archlap network[837]: Failed to bring the network up for profile 'wlp3s0-Pixel_2567'
Apr 02 18:26:22 timo-archlap systemd[1]: netctl@wlp3s0\x2dPixel_2567.service: Main process exited, code=exited, status=1/FAILURE
Apr 02 18:26:22 timo-archlap systemd[1]: netctl@wlp3s0\x2dPixel_2567.service: Failed with result 'exit-code'.

here is the output of `find /etc/systemd -type l -exec test -f {} \; -print | awk -F'/' '{ printf ("%-40s | %s\n", $(NF-0), $(NF-1)) }' | sort -f`

acpid.service                            | multi-user.target.wants
avahi-daemon.service                     | multi-user.target.wants
avahi-daemon.socket                      | sockets.target.wants
cronie.service                           | multi-user.target.wants
dbus-org.freedesktop.Avahi.service       | system
display-manager.service                  | system
gcr-ssh-agent.socket                     | sockets.target.wants
getty@tty1.service                       | getty.target.wants
gnome-keyring-daemon.socket              | sockets.target.wants
netctl@wlp3s0\x2dlcb\x2d05934.service    | multi-user.target.wants
ntpd.service                             | multi-user.target.wants
p11-kit-server.socket                    | sockets.target.wants
pipewire-media-session.service           | pipewire.service.wants
pipewire-session-manager.service         | user
pipewire.socket                          | sockets.target.wants
pulseaudio.socket                        | sockets.target.wants
remote-fs.target                         | multi-user.target.wants
xdg-user-dirs-update.service             | default.target.wants

The wifi still works for my home network, but not for some new networks I wanted to connect to. I believe I can also no longer connect to selected networks I was previously able to connect to, but I'm not 100% sure on that.

I'm using a Lenovo X1 Carbon (2012)


Can you advise what could be the issue here? Thank you

Last edited by t-moe (2024-04-03 18:41:18)

Offline

#2 2024-04-02 21:02:16

seth
Member
Registered: 2012-09-03
Posts: 54,569

Re: [SOLVED] wlp3s0:deauthenticating by local choice(Reason:1=UNSPECIFIED)

Offline

#3 2024-04-03 06:51:14

t-moe
Member
Registered: 2024-04-02
Posts: 4

Re: [SOLVED] wlp3s0:deauthenticating by local choice(Reason:1=UNSPECIFIED)

This is indeed somehow related.

When downgrading netctl to 1.27 I can connect to the network. With netctl 1.29 I cannot.

However,
adding a profile (/etc/profile.d/netctl.sh) with `export NETCTL_DEBUG=yes` does not reveal any new information.

Here is the full log output again:

Apr 03 08:43:57 timo-archlap sudo[27831]:     timo : TTY=pts/1 ; PWD=/home/timo/Documents/smartcamp ; USER=root ; COMMAND=/usr/bin/netctl switch-to wlp3s0-Pixel_2567
Apr 03 08:43:57 timo-archlap sudo[27831]: pam_unix(sudo:session): session opened for user root(uid=0) by timo(uid=1000)
Apr 03 08:43:58 timo-archlap systemd[1]: Starting Networking for netctl profile wlp3s0-Pixel_2567...
Apr 03 08:43:58 timo-archlap network[27918]: Starting network profile 'wlp3s0-Pixel_2567'...
Apr 03 08:43:58 timo-archlap kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Apr 03 08:43:58 timo-archlap kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Apr 03 08:43:58 timo-archlap systemd[1]: Started Networking for netctl profile wlp3s0-Pixel_2567.
Apr 03 08:43:58 timo-archlap sudo[27831]: pam_unix(sudo:session): session closed for user root
Apr 03 08:44:02 timo-archlap kernel: wlp3s0: authenticate with ea:77:8b:2f:4f:3b (local address=8c:70:5a:ff:32:74)
Apr 03 08:44:02 timo-archlap kernel: wlp3s0: send auth to ea:77:8b:2f:4f:3b (try 1/3)
Apr 03 08:44:02 timo-archlap kernel: wlp3s0: authenticate with ea:77:8b:2f:4f:3b (local address=8c:70:5a:ff:32:74)
Apr 03 08:44:02 timo-archlap kernel: wlp3s0: send auth to ea:77:8b:2f:4f:3b (try 1/3)
Apr 03 08:44:02 timo-archlap kernel: wlp3s0: authenticated
Apr 03 08:44:02 timo-archlap kernel: wlp3s0: associate with ea:77:8b:2f:4f:3b (try 1/3)
Apr 03 08:44:02 timo-archlap kernel: wlp3s0: RX AssocResp from ea:77:8b:2f:4f:3b (capab=0x431 status=0 aid=1)
Apr 03 08:44:02 timo-archlap kernel: wlp3s0: associated
Apr 03 08:44:02 timo-archlap kernel: wlp3s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by ea:77:8b:2f:4f:3b
Apr 03 08:44:02 timo-archlap kernel: wlp3s0: deauthenticating from ea:77:8b:2f:4f:3b by local choice (Reason: 1=UNSPECIFIED)
Apr 03 08:44:05 timo-archlap kernel: wlp3s0: authenticate with ea:77:8b:2f:4f:3b (local address=8c:70:5a:ff:32:74)
Apr 03 08:44:05 timo-archlap kernel: wlp3s0: send auth to ea:77:8b:2f:4f:3b (try 1/3)
Apr 03 08:44:05 timo-archlap kernel: wlp3s0: authenticated
Apr 03 08:44:05 timo-archlap kernel: wlp3s0: associate with ea:77:8b:2f:4f:3b (try 1/3)
Apr 03 08:44:05 timo-archlap kernel: wlp3s0: RX AssocResp from ea:77:8b:2f:4f:3b (capab=0x431 status=0 aid=1)
Apr 03 08:44:05 timo-archlap kernel: wlp3s0: associated
Apr 03 08:44:05 timo-archlap kernel: wlp3s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by ea:77:8b:2f:4f:3b
Apr 03 08:44:05 timo-archlap kernel: wlp3s0: deauthenticating from ea:77:8b:2f:4f:3b by local choice (Reason: 1=UNSPECIFIED)
Apr 03 08:44:09 timo-archlap kernel: wlp3s0: authenticate with ea:77:8b:2f:4f:3b (local address=8c:70:5a:ff:32:74)
Apr 03 08:44:09 timo-archlap kernel: wlp3s0: send auth to ea:77:8b:2f:4f:3b (try 1/3)
Apr 03 08:44:09 timo-archlap kernel: wlp3s0: authenticated
Apr 03 08:44:09 timo-archlap kernel: wlp3s0: associate with ea:77:8b:2f:4f:3b (try 1/3)
Apr 03 08:44:09 timo-archlap kernel: wlp3s0: RX AssocResp from ea:77:8b:2f:4f:3b (capab=0x431 status=0 aid=1)
Apr 03 08:44:09 timo-archlap kernel: wlp3s0: associated
Apr 03 08:44:09 timo-archlap kernel: wlp3s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by ea:77:8b:2f:4f:3b
Apr 03 08:44:09 timo-archlap kernel: wlp3s0: deauthenticating from ea:77:8b:2f:4f:3b by local choice (Reason: 1=UNSPECIFIED)
Apr 03 08:44:12 timo-archlap kernel: wlp3s0: authenticate with ea:77:8b:2f:4f:3b (local address=8c:70:5a:ff:32:74)
Apr 03 08:44:12 timo-archlap kernel: wlp3s0: send auth to ea:77:8b:2f:4f:3b (try 1/3)
Apr 03 08:44:12 timo-archlap kernel: wlp3s0: authenticated
Apr 03 08:44:12 timo-archlap kernel: wlp3s0: associate with ea:77:8b:2f:4f:3b (try 1/3)
Apr 03 08:44:12 timo-archlap kernel: wlp3s0: RX AssocResp from ea:77:8b:2f:4f:3b (capab=0x431 status=0 aid=1)
Apr 03 08:44:12 timo-archlap kernel: wlp3s0: associated
Apr 03 08:44:12 timo-archlap kernel: wlp3s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by ea:77:8b:2f:4f:3b
Apr 03 08:44:12 timo-archlap kernel: wlp3s0: deauthenticating from ea:77:8b:2f:4f:3b by local choice (Reason: 1=UNSPECIFIED)
Apr 03 08:44:14 timo-archlap network[27918]: WPA association/authentication failed for interface 'wlp3s0'
Apr 03 08:44:16 timo-archlap network[27918]: Failed to bring the network up for profile 'wlp3s0-Pixel_2567'
Apr 03 08:44:16 timo-archlap systemd[1]: netctl@wlp3s0\x2dPixel_2567.service: Main process exited, code=exited, status=1/FAILURE
Apr 03 08:44:16 timo-archlap systemd[1]: netctl@wlp3s0\x2dPixel_2567.service: Failed with result 'exit-code'.
Apr 03 08:44:16 timo-archlap systemd[1]: netctl@wlp3s0\x2dPixel_2567.service: Consumed 1.003s CPU time.

Also, my netctcl profile already contains `Security=wpa`. 

Description='Automatically generated profile by wifi-menu'
Interface=wlp3s0
Connection=wireless
Security=wpa
ESSID=Pixel_2567
IP=dhcp
Key=plaintextkey    # I'm aware that there are safer alternatives. Unfortunately wifi-menu does not automatically apply these, and I'm often too lazy to exchange the plaintext secrets by something more secure

Offline

#4 2024-04-03 08:32:04

seth
Member
Registered: 2012-09-03
Posts: 54,569

Re: [SOLVED] wlp3s0:deauthenticating by local choice(Reason:1=UNSPECIFIED)

adding a profile (/etc/profile.d/netctl.sh) with `export NETCTL_DEBUG=yes` does not reveal any new information.

We resorted to checking wpa_supplicant  manually in the other thread:
https://wiki.archlinux.org/title/Wpa_supplicant#Manual
https://wiki.archlinux.org/title/Wpa_su … n_failures

Can you disable WPA3 in the phones hotpsot settings?

Offline

#5 2024-04-03 10:34:44

t-moe
Member
Registered: 2024-04-02
Posts: 4

Re: [SOLVED] wlp3s0:deauthenticating by local choice(Reason:1=UNSPECIFIED)

I tried to disabled WPA3, but this didnt change anything.

Next I tried to run wpa_supplicant manually with the following config:

network={
	ssid="Pixel_2567"
	psk="...."
	key_mgmt=WPA-PSK SAE
        ieee80211w=0		
}

this works.

But as soon as I change ieee80211w to 1 or 2, the connection will fail.

As a workaround for me, I've now created the following netctl profile:

Interface=wlp3s0
Connection=wireless
Security=wpa-configsection
IP=dhcp

WPAConfigSection=(
'ssid="Pixel_2567"'
'psk="..."'
'key_mgmt=WPA-PSK SAE'
'ieee80211w=0'
)

This also works.


It is possible that my wifi chip (laptop: X1 Carbon (1st Gen) released in 2012)  doesnt support ieee80211w.
But netctl 1.27 also had  ieee80211w=1 as a default and this worked fine.... Strange...


here is the truncated ouput of wpa_supplicant

wlp3s0: State: SCANNING -> AUTHENTICATING
Not configuring frame filtering - BSS 00:00:00:00:00:00 is not a Hotspot 2.0 network
wlp3s0: Determining shared radio frequencies (max len 1)
wlp3s0: Shared frequencies (len=0): completed iteration
nl80211: Authenticate (ifindex=2)
  * bssid=de:fe:95:10:91:d0
  * freq=2417
  * SSID=Pixel_2567
  * IEs - hexdump(len=0): [NULL]
  * Auth Type 0
nl80211: Authentication request send successfully
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp3s0
nl80211: New station de:fe:95:10:91:d0
nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp3s0
nl80211: Authenticate event
wlp3s0: Event AUTH (10) received
wlp3s0: SME: Authentication response: peer=de:fe:95:10:91:d0 auth_type=0 auth_transaction=2 status_code=0
SME: Association Request IEs - hexdump(len=60): 30 1a 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 00 00 00 0f ac 06 7f 0b 00 00 0a 02 01 40 40 40 00 01 20 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
wlp3s0: Trying to associate with de:fe:95:10:91:d0 (SSID='Pixel_2567' freq=2417 MHz)
wlp3s0: State: AUTHENTICATING -> ASSOCIATING
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
WPA: set own WPA/RSN IE - hexdump(len=28): 30 1a 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 00 00 00 0f ac 06
wlp3s0: RSN: clearing own RSNXE
nl80211: Associate (ifindex=2)
  * bssid=de:fe:95:10:91:d0
  * freq=2417
  * SSID=Pixel_2567
  * IEs - hexdump(len=60): 30 1a 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 00 00 00 0f ac 06 7f 0b 00 00 0a 02 01 40 40 40 00 01 20 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
  * WPA Versions 0x2
  * pairwise=0xfac04
  * group=0xfac04
  * akm=0xfac02
  * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00
  * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Association request send successfully
nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp3s0
nl80211: Associate event
nl80211: Associated on 2417 MHz
nl80211: Associated with de:fe:95:10:91:d0
nl80211: Set drv->ssid based on scan res info to 'Pixel_2567'
wlp3s0: Event ASSOC (0) received
wlp3s0: Association info event
req_ies - hexdump(len=157): 00 0a 50 69 78 65 6c 5f 32 35 36 37 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 21 02 00 0f 24 1a 01 01 02 01 03 01 04 01 05 01 06 01 07 01 08 01 09 01 0a 01 0b 01 0c 01 0d 01 30 1a 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 00 00 00 0f ac 06 2d 1a 7e 10 17 ff ff 00 00 00 00 00 00 00 00 2c 01 01 00 00 00 00 00 00 00 00 00 00 7f 0b 00 00 0a 02 01 40 40 40 00 01 20 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f dd 07 00 50 f2 02 00 01 00
resp_ies - hexdump(len=116): 01 08 82 84 8b 96 24 30 48 6c 32 04 0c 12 18 60 2d 1a 2d 00 1b ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3d 16 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 00 00 00 00 40 dd 0a 00 10 18 02 00 00 1c 00 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00
wlp3s0: freq=2417 MHz
WPA: set own WPA/RSN IE - hexdump(len=28): 30 1a 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 00 00 00 0f ac 06
wlp3s0: RSN: PMKID from assoc IE not found from PMKSA cache
wlp3s0: RSN: clearing own RSNXE
wlp3s0: State: ASSOCIATING -> ASSOCIATED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp3s0: Associated to a new BSS: BSSID=de:fe:95:10:91:d0
wlp3s0: Associated with de:fe:95:10:91:d0
wlp3s0: WPA: Association event - clear replay counter
wlp3s0: WPA: Clear old PTK
TDLS: Remove peers on association
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_BE entering state IDLE
wlp3s0: Setting authentication timeout: 10 sec 0 usec
wlp3s0: Cancelling scan request
WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0
WMM AC: U-APSD queues=0x0
WMM AC: Valid WMM association, WMM AC is enabled
wlp3s0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp3s0
nl80211: Ignore connect event (cmd=46) when using userspace SME
nl80211: BSS Event 129 (NL80211_CMD_CONTROL_PORT_FRAME) received for wlp3s0
wlp3s0: Event EAPOL_RX (23) received
wlp3s0: RX EAPOL from de:fe:95:10:91:d0
wlp3s0: Setting authentication timeout: 10 sec 0 usec
wlp3s0: IEEE 802.1X RX: version=2 type=3 length=95
wlp3s0:   EAPOL-Key type=2
wlp3s0:   key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
wlp3s0:   key_length=16 key_data_length=0
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
  key_nonce - hexdump(len=32): ed 3c 6d 8c 06 9b e7 e4 1d a3 7f d1 1d 75 64 2a b2 9b c8 e3 f9 c6 2a bf b6 95 ac 01 43 91 dd 8d
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp3s0: State: ASSOCIATED -> 4WAY_HANDSHAKE
wlp3s0: WPA: RX message 1 of 4-Way Handshake from de:fe:95:10:91:d0 (ver=2)
RSN: msg 1/4 key data - hexdump(len=0):
WPA: Renewed SNonce - hexdump(len=32): 07 55 cb 88 cf e3 64 17 58 87 7f 7d 20 3f 45 4f 5e 8d 0c 44 84 14 53 d1 32 98 54 56 0a 94 f6 f5
WPA: PTK derivation using PRF(SHA1)
WPA: PTK derivation - A1=8c:70:5a:ff:32:74 A2=de:fe:95:10:91:d0
WPA: Nonce1 - hexdump(len=32): 07 55 cb 88 cf e3 64 17 58 87 7f 7d 20 3f 45 4f 5e 8d 0c 44 84 14 53 d1 32 98 54 56 0a 94 f6 f5
WPA: Nonce2 - hexdump(len=32): ed 3c 6d 8c 06 9b e7 e4 1d a3 7f d1 1d 75 64 2a b2 9b c8 e3 f9 c6 2a bf b6 95 ac 01 43 91 dd 8d
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: KEK - hexdump(len=16): [REMOVED]
WPA: TK - hexdump(len=16): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=28): 30 1a 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 00 00 00 0f ac 06
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlp3s0: WPA: Sending EAPOL-Key 2/4
WPA: Send EAPOL-Key frame to de:fe:95:10:91:d0 ver=2 mic_len=16 key_mgmt=0x2
WPA: EAPOL-Key MIC using HMAC-SHA1
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: Derived Key MIC - hexdump(len=16): 13 1c 68 3b 45 e1 aa c3 2e fc db 8f a8 0b ec b2
nl80211: Send over control port dest=de:fe:95:10:91:d0 proto=0x888e len=127 no_encrypt=1
nl80211: tx_control_port cookie=0x9b
nl80211: Drv Event 139 (NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS) received for wlp3s0
nl80211: Control port TX status (ack=1), cookie=155
wlp3s0: Event EAPOL_TX_STATUS (37) received
nl80211: BSS Event 129 (NL80211_CMD_CONTROL_PORT_FRAME) received for wlp3s0
wlp3s0: Event EAPOL_RX (23) received
wlp3s0: RX EAPOL from de:fe:95:10:91:d0
wlp3s0: IEEE 802.1X RX: version=2 type=3 length=183
wlp3s0:   EAPOL-Key type=2
wlp3s0:   key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
wlp3s0:   key_length=16 key_data_length=88
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02
  key_nonce - hexdump(len=32): ed 3c 6d 8c 06 9b e7 e4 1d a3 7f d1 1d 75 64 2a b2 9b c8 e3 f9 c6 2a bf b6 95 ac 01 43 91 dd 8d
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): c3 cc 03 65 3e c6 e2 3e f2 76 a9 e7 51 a3 73 b8
WPA: EAPOL-Key MIC using HMAC-SHA1
RSN: encrypted key data - hexdump(len=88): be 20 b4 ef d2 c5 f5 2a a0 f8 f3 08 c7 6d 72 e7 55 ed 1f ae 44 99 83 dd b4 59 68 b1 93 bd 98 d5 f3 60 84 6f 3c 0b 2c 19 4d 62 5e 3d f8 cb 9b b5 5f 69 e8 a7 f3 2e 16 08 47 a0 ae ff 94 80 20 96 a4 28 b4 f1 bf a8 fb 47 93 07 53 86 cc 58 2b 05 ef ec 06 62 66 cf 1e ed
WPA: Decrypt Key Data using AES-UNWRAP (KEK length 16)
WPA: decrypted EAPOL-Key key data - hexdump(len=80): [REMOVED]
wlp3s0: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
wlp3s0: WPA: RX message 3 of 4-Way Handshake from de:fe:95:10:91:d0 (ver=2)
WPA: IE KeyData - hexdump(len=80): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 8c 00 dd 16 00 0f ac 01 01 00 d2 d9 9c 15 bd a9 ea 97 24 86 c8 02 07 75 ad 1c dd 1c 00 0f ac 09 04 00 00 00 00 00 00 00 60 97 f4 e2 5d a7 3d 52 6f bb 54 e1 de 4c 3d 23 dd 00 00 00
WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 8c 00
WPA: GTK in EAPOL-Key - hexdump(len=24): [REMOVED]
WPA: IGTK in EAPOL-Key - hexdump(len=30): [REMOVED]
wlp3s0: WPA: Sending EAPOL-Key 4/4
WPA: Send EAPOL-Key frame to de:fe:95:10:91:d0 ver=2 mic_len=16 key_mgmt=0x2
WPA: EAPOL-Key MIC using HMAC-SHA1
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: Derived Key MIC - hexdump(len=16): 20 71 41 a4 46 6d 79 b5 ca 71 41 0d 16 4d 31 d3
nl80211: Send over control port dest=de:fe:95:10:91:d0 proto=0x888e len=99 no_encrypt=1
nl80211: tx_control_port cookie=0x9c
wlp3s0: WPA: Installing PTK to the driver
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=3 addr=0x5f8e876faab0 key_idx=0 set_tx=1 seq_len=6 key_len=16 key_flag=0x2c
nl80211: NEW_KEY
nl80211: KEY_DATA - hexdump(len=16): [REMOVED]
nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
   addr=de:fe:95:10:91:d0
   pairwise key
EAPOL: External notification - portValid=1
wlp3s0: State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RSN: received GTK in pairwise handshake - hexdump(len=18): [REMOVED]
WPA: Group Key - hexdump(len=16): [REMOVED]
wlp3s0: WPA: Installing GTK to the driver (keyidx=1 tx=0 len=16)
WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=3 addr=0x5f8e86842f24 key_idx=1 set_tx=0 seq_len=6 key_len=16 key_flag=0x14
nl80211: NEW_KEY
nl80211: KEY_DATA - hexdump(len=16): [REMOVED]
nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
   broadcast key
wlp3s0: WPA: IGTK keyid 4 pn 000000000000
WPA: IGTK - hexdump(len=16): [REMOVED]
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=4 addr=0x5f8e86842f24 key_idx=4 set_tx=0 seq_len=6 key_len=16 key_flag=0x14
nl80211: NEW_KEY
nl80211: KEY_DATA - hexdump(len=16): [REMOVED]
nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
   broadcast key
nl80211: kernel reports: key setting validation failed
nl80211: set_key failed; err=-22 Invalid argument
wlp3s0: WPA: Failed to configure IGTK to the driver
wlp3s0: RSN: Failed to configure IGTK
wlp3s0: Request to deauthenticate - bssid=de:fe:95:10:91:d0 pending_bssid=00:00:00:00:00:00 reason=1 (UNSPECIFIED) state=GROUP_HANDSHAKE
TDLS: Tear down peers
wpa_driver_nl80211_deauthenticate(addr=de:fe:95:10:91:d0 reason_code=1)
wlp3s0: Event DEAUTH (11) received
wlp3s0: Deauthentication notification
wlp3s0:  * reason 1 (UNSPECIFIED) locally_generated=1
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
wlp3s0: CTRL-EVENT-DISCONNECTED bssid=de:fe:95:10:91:d0 reason=1 locally_generated=1
wlp3s0: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=8)
wlp3s0: Setting scan request: 0.100000 sec
wlp3s0: Radio work 'sme-connect'@0x5f8e87742fe0 done in 0.377122 seconds
wlp3s0: radio_work_free('sme-connect'@0x5f8e87742fe0): num_active_works --> 0
Added BSSID de:fe:95:10:91:d0 into ignore list, ignoring for 10 seconds
wlp3s0: Consecutive connection failures: 1 --> request scan in 100 ms
wlp3s0: Ignore new scan request for 0.100000 sec since an earlier request is scheduled to trigger sooner
TDLS: Remove peers on disassociation
wlp3s0: WPA: Clear old PMK and PTK
wlp3s0: Disconnect event - remove keys
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 key_flag=0x10
nl80211: DEL_KEY
   broadcast key
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 key_flag=0x10
nl80211: DEL_KEY
   broadcast key
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 key_flag=0x10
nl80211: DEL_KEY
   broadcast key
nl80211: set_key failed; err=-22 Invalid argument
wpa_driver_nl80211_set_key: ifindex=2 (wlp3s0) alg=0 addr=0x5f8e876cf0c0 key_idx=0 set_tx=0 seq_len=0 key_len=0 key_flag=0x20
nl80211: DEL_KEY
   addr=de:fe:95:10:91:d0
   pairwise key
nl80211: Data frame filter flags=0x0
wlp3s0: State: GROUP_HANDSHAKE -> DISCONNECTED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
WMM AC: WMM AC is disabled
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
nl80211: Data frame filter flags=0x0
wlp3s0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
QM: Clear all active DSCP policies
wlp3s0: CTRL-EVENT-DSCP-POLICY clear_all
wlp3s0: Ignore new scan request for 5.000000 sec since an earlier request is scheduled to trigger sooner
nl80211: Drv Event 139 (NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS) received for wlp3s0
nl80211: Control port TX status (ack=1), cookie=156
wlp3s0: Event EAPOL_TX_STATUS (37) received
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp3s0
nl80211: Delete station de:fe:95:10:91:d0
nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlp3s0
nl80211: Deauthenticate event
nl80211: Ignore deauth event triggered due to own deauth request
nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp3s0
nl80211: Ignore disconnect event when using userspace SME
RTM_NEWLINK: ifi_index=2 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp3s0
nl80211: Regulatory domain change
 * initiator=0
 * type=1
wlp3s0: Event CHANNEL_LIST_CHANGED (27) received
wlp3s0: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
wlp3s0: Updating hw mode
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR]
nl80211: Mode IEEE 802.11a: 5180[NO_IR] 5200[NO_IR] 5220[NO_IR] 5240[NO_IR] 5260[NO_IR][RADAR] 5280[NO_IR][RADAR] 5300[NO_IR][RADAR] 5320[NO_IR][RADAR] 5500[NO_IR][RADAR] 5520[NO_IR][RADAR] 5540[NO_IR][RADAR]
nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR]
wlp3s0: State: DISCONNECTED -> SCANNING

 

Offline

#6 2024-04-03 18:13:36

seth
Member
Registered: 2012-09-03
Posts: 54,569

Re: [SOLVED] wlp3s0:deauthenticating by local choice(Reason:1=UNSPECIFIED)

"0" is disabled, "1" is optional - afair the previous version had

proto=RSN WPA

and did not set at all

key_mgmt=WPA-PSK SAE
ieee80211w=1

?

Offline

#7 2024-04-03 18:38:58

t-moe
Member
Registered: 2024-04-02
Posts: 4

Re: [SOLVED] wlp3s0:deauthenticating by local choice(Reason:1=UNSPECIFIED)

Ah yes,
I somehow, mixed up things when reading post #21 of the other thread.

For me its enough to know that setting ieee80211w=0 will solve the issue. Futher investigation will probably not benefit a large portion of the userbase, since I'm on "very old" hardware and its unlikely that netctl is going to be modified accordingly.

Thanks for pointing me in the right direction seth.

Offline

Board footer

Powered by FluxBB