You are not logged in.
- Topics: Active | Unanswered
#1 2024-04-19 19:24:05
- Zibi1981
- Member
- From: Poland
- Registered: 2008-01-31
- Posts: 644
Errors when trying to install Linux-zen kernel
I wanted to try linux-zen kernel (for the first time), but when trying to install it i get these errors
$ sudo pacman -S linux-zen
rozwiązywanie zależności…
szukanie sprzecznych pakietów...
Pakiet (1) Nowa wersja Zmiana Do pobrania
extra/linux-zen 6.8.7.zen1-1 136,94 MiB 136,72 MiB
Do pobrania: 136,72 MiB
Do zainstalowania: 136,94 MiB
:: Kontynuować instalację? [T/n] t
:: Pobieranie pakietów…
linux-zen-6.8.7.zen1-1-x86_64 136,7 MiB 17,3 MiB/s 00:08 [####################################] 100%
(1/1) sprawdzanie kluczy w bazie [####################################] 100%
(1/1) sprawdzanie spójności pakietów [####################################] 100%
(1/1) wczytywanie listy plików [####################################] 100%
(1/1) sprawdzanie konfliktów plików [####################################] 100%
(1/1) sprawdzanie dostępnego miejsca na dysku [####################################] 100%
:: Przetwarzanie zmian pakietu...
(1/1) instalowanie linux-zen [####################################] 100%
Opcjonalne zależności dla linux-zen
wireless-regdb: to set the correct wireless channels of your country [zainstalowano]
linux-firmware: firmware images needed for some devices [zainstalowano]
:: Uruchamianie po-transakcji...
(1/3) Arming ConditionNeedsUpdate...
(2/3) Updating module dependencies...
(3/3) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen.img
==> Starting build: '6.8.7-zen1-1-zen'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> ERROR: module not found: 'nvidia'
==> ERROR: module not found: 'nvidia_modeset'
==> ERROR: module not found: 'nvidia_uvm'
==> ERROR: module not found: 'nvidia_drm'
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux-zen.img'
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'fallback'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen-fallback.img -S autodetect
==> Starting build: '6.8.7-zen1-1-zen'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'aic94xx'
==> WARNING: Possibly missing firmware for module: 'bfa'
==> WARNING: Possibly missing firmware for module: 'qed'
==> WARNING: Possibly missing firmware for module: 'qla1280'
==> WARNING: Possibly missing firmware for module: 'qla2xxx'
==> WARNING: Possibly missing firmware for module: 'wd719x'
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> ERROR: module not found: 'nvidia'
==> ERROR: module not found: 'nvidia_modeset'
==> ERROR: module not found: 'nvidia_uvm'
==> ERROR: module not found: 'nvidia_drm'
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux-zen-fallback.img'
Error 24 : Write error : cannot write compressed block
==> ERROR: Initcpio image generation FAILED: 'lz4' reported an error
błąd: komenda nie wykonała się poprawnie
[cardiozibi@MSI-Raider ~]$ sudo pacman -S linux-zen nvidia
ostrzeżenie: linux-zen-6.8.7.zen1-1 jest w najnowszej wersji -- ponowne instalowanie
ostrzeżenie: nvidia-550.67-8 jest w najnowszej wersji -- ponowne instalowanie
rozwiązywanie zależności…
szukanie sprzecznych pakietów...
Pakiet (2) Obecna wersja Nowa wersja Zmiana Do pobrania
extra/linux-zen 6.8.7.zen1-1 6.8.7.zen1-1 0,00 MiB
extra/nvidia 550.67-8 550.67-8 0,00 MiB 40,47 MiB
Do pobrania: 40,47 MiB
Do zainstalowania: 177,43 MiB
Zmiana po aktualizacji: 0,00 MiB
:: Kontynuować instalację? [T/n] t
:: Pobieranie pakietów…
nvidia-550.67-8-x86_64 40,5 MiB 13,2 MiB/s 00:03 [####################################] 100%
(2/2) sprawdzanie kluczy w bazie [####################################] 100%
(2/2) sprawdzanie spójności pakietów [####################################] 100%
(2/2) wczytywanie listy plików [####################################] 100%
(2/2) sprawdzanie konfliktów plików [####################################] 100%
(2/2) sprawdzanie dostępnego miejsca na dysku [####################################] 100%
:: Przetwarzanie zmian pakietu...
(1/2) przeinstalowywanie linux-zen [####################################] 100%
(2/2) przeinstalowywanie nvidia [####################################] 100%
:: Uruchamianie po-transakcji...
(1/4) Arming ConditionNeedsUpdate...
(2/4) Updating module dependencies...
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
(3/4) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen.img
==> Starting build: '6.8.7-zen1-1-zen'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> ERROR: module not found: 'nvidia'
==> ERROR: module not found: 'nvidia_modeset'
==> ERROR: module not found: 'nvidia_uvm'
==> ERROR: module not found: 'nvidia_drm'
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux-zen.img'
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'fallback'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen-fallback.img -S autodetect
==> Starting build: '6.8.7-zen1-1-zen'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'aic94xx'
==> WARNING: Possibly missing firmware for module: 'bfa'
==> WARNING: Possibly missing firmware for module: 'qed'
==> WARNING: Possibly missing firmware for module: 'qla1280'
==> WARNING: Possibly missing firmware for module: 'qla2xxx'
==> WARNING: Possibly missing firmware for module: 'wd719x'
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> ERROR: module not found: 'nvidia'
==> ERROR: module not found: 'nvidia_modeset'
==> ERROR: module not found: 'nvidia_uvm'
==> ERROR: module not found: 'nvidia_drm'
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux-zen-fallback.img'
Error 24 : Write error : cannot write compressed block
==> ERROR: Initcpio image generation FAILED: 'lz4' reported an error
błąd: komenda nie wykonała się poprawnie
(4/4) Update NVIDIA module in initcpio
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux -g /boot/initramfs-linux.img
==> Starting build: '6.8.7-arch1-1'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux.img'
-> Early uncompressed CPIO image generation successful
==> Initcpio image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen.img
==> Starting build: '6.8.7-zen1-1-zen'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> ERROR: module not found: 'nvidia'
==> ERROR: module not found: 'nvidia_modeset'
==> ERROR: module not found: 'nvidia_uvm'
==> ERROR: module not found: 'nvidia_drm'
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux-zen.img'
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'fallback'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen-fallback.img -S autodetect
==> Starting build: '6.8.7-zen1-1-zen'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'aic94xx'
==> WARNING: Possibly missing firmware for module: 'bfa'
==> WARNING: Possibly missing firmware for module: 'qed'
==> WARNING: Possibly missing firmware for module: 'qla1280'
==> WARNING: Possibly missing firmware for module: 'qla2xxx'
==> WARNING: Possibly missing firmware for module: 'wd719x'
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> ERROR: module not found: 'nvidia'
==> ERROR: module not found: 'nvidia_modeset'
==> ERROR: module not found: 'nvidia_uvm'
==> ERROR: module not found: 'nvidia_drm'
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux-zen-fallback.img'
Error 24 : Write error : cannot write compressed block
==> ERROR: Initcpio image generation FAILED: 'lz4' reported an error
błąd: komenda nie wykonała się poprawnieReinstalling nvidia package hasn't change a thing. Do I miss something?
"... being a Linux user is sort of like living in a house inhabited by a large family of carpenters and architects. Every morning when you wake up, the house is a little different. Maybe there is a new turret, or some walls have moved. Or perhaps someone has temporarily removed the floor under your bed."
MSI Raider GE78HX 13VI-032PL
Offline
#2 2024-04-19 19:32:57
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,771
Re: Errors when trying to install Linux-zen kernel
For the zen kernel (and generally kernels that are "custom" or self compiled) you need to install the kernel headers of the kernel you want to build modules for and the DKMS package of the kernel module you want to build. In this case linux-zen-headers and nvidia-dkms.
Further info: https://wiki.archlinux.org/title/Dynami … le_Support and/or https://wiki.archlinux.org/title/NVIDIA#Installation which mentions to use DKMS for other kernels.
Offline
#3 2024-04-19 20:09:28
- Zibi1981
- Member
- From: Poland
- Registered: 2008-01-31
- Posts: 644
Re: Errors when trying to install Linux-zen kernel
I got this
$ sudo pacman -S linux-zen linux-zen-headers nvidia-dkms
rozwiązywanie zależności…
szukanie sprzecznych pakietów...
:: nvidia-dkms-550.67-1 and nvidia-550.67-8 are in conflict (NVIDIA-MODULE). Remove nvidia? [t/N] t
Pakiet (4) Obecna wersja Nowa wersja Zmiana Do pobrania
nvidia 550.67-8 -40,49 MiB
extra/linux-zen 6.8.7.zen1-1 136,94 MiB
extra/linux-zen-headers 6.8.7.zen1-1 131,50 MiB 26,08 MiB
extra/nvidia-dkms 550.67-1 68,17 MiB 39,78 MiB
Do pobrania: 65,86 MiB
Do zainstalowania: 336,61 MiB
Zmiana po aktualizacji: 296,13 MiB
:: Kontynuować instalację? [T/n] t
:: Pobieranie pakietów…
nvidia-dkms-550.67-1-x86_64 39,8 MiB 16,0 MiB/s 00:02 [####################################] 100%
linux-zen-headers-6.8.7.zen1-1-x... 26,1 MiB 7,35 MiB/s 00:04 [####################################] 100%
Łącznie (2/2) 65,9 MiB 18,4 MiB/s 00:04 [####################################] 100%
(3/3) sprawdzanie kluczy w bazie [####################################] 100%
(3/3) sprawdzanie spójności pakietów [####################################] 100%
(3/3) wczytywanie listy plików [####################################] 100%
(3/3) sprawdzanie konfliktów plików [####################################] 100%
(4/4) sprawdzanie dostępnego miejsca na dysku [####################################] 100%
:: Przetwarzanie zmian pakietu...
(1/1) usuwanie nvidia [####################################] 100%
(1/3) instalowanie linux-zen [####################################] 100%
Opcjonalne zależności dla linux-zen
wireless-regdb: to set the correct wireless channels of your country [zainstalowano]
linux-firmware: firmware images needed for some devices [zainstalowano]
(2/3) instalowanie linux-zen-headers [####################################] 100%
(3/3) instalowanie nvidia-dkms [####################################] 100%
:: Uruchamianie po-transakcji...
(1/5) Arming ConditionNeedsUpdate...
(2/5) Updating module dependencies...
(3/5) Install DKMS modules
==> dkms install --no-depmod nvidia/550.67 -k 6.8.7-arch1-1
==> dkms install --no-depmod nvidia/550.67 -k 6.8.7-zen1-1-zen
==> dkms install --no-depmod acpi_ec/r28.75102ce -k 6.8.7-zen1-1-zen
==> depmod 6.8.7-arch1-1
==> depmod 6.8.7-zen1-1-zen
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
==> ERROR: Missing 6.8.5-arch1-1 kernel modules tree for module nvidia/550.67.
(4/5) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux -g /boot/initramfs-linux.img
==> Starting build: '6.8.7-arch1-1'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux.img'
-> Early uncompressed CPIO image generation successful
==> Initcpio image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen.img
==> Starting build: '6.8.7-zen1-1-zen'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux-zen.img'
-> Early uncompressed CPIO image generation successful
Error 24 : Write error : cannot write compressed block
bsdtar: Write error
bsdtar: Write error
==> ERROR: Initcpio image generation FAILED: 'bsdtar (step 1)' reported an error
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'fallback'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen-fallback.img -S autodetect
==> Starting build: '6.8.7-zen1-1-zen'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'aic94xx'
==> WARNING: Possibly missing firmware for module: 'bfa'
==> WARNING: Possibly missing firmware for module: 'qed'
==> WARNING: Possibly missing firmware for module: 'qla1280'
==> WARNING: Possibly missing firmware for module: 'qla2xxx'
==> WARNING: Possibly missing firmware for module: 'wd719x'
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux-zen-fallback.img'
cat: błąd zapisu: Brak miejsca na urządzeniu
bsdtar: Write error
bsdtar: Write error
==> ERROR: Early uncompressed CPIO image generation FAILED: 'bsdtar (step 1)' reported an error
błąd: komenda nie wykonała się poprawnie
(5/5) Update NVIDIA module in initcpio
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux -g /boot/initramfs-linux.img
==> Starting build: '6.8.7-arch1-1'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux.img'
-> Early uncompressed CPIO image generation successful
==> Initcpio image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen.img
==> Starting build: '6.8.7-zen1-1-zen'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux-zen.img'
-> Early uncompressed CPIO image generation successful
Error 24 : Write error : cannot write compressed block
bsdtar: Write error
bsdtar: Write error
==> ERROR: Initcpio image generation FAILED: 'bsdtar (step 1)' reported an error
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'fallback'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen-fallback.img -S autodetect
==> Starting build: '6.8.7-zen1-1-zen'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'aic94xx'
==> WARNING: Possibly missing firmware for module: 'bfa'
==> WARNING: Possibly missing firmware for module: 'qed'
==> WARNING: Possibly missing firmware for module: 'qla1280'
==> WARNING: Possibly missing firmware for module: 'qla2xxx'
==> WARNING: Possibly missing firmware for module: 'wd719x'
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux-zen-fallback.img'
cat: błąd zapisu: Brak miejsca na urządzeniu
bsdtar: Write error
bsdtar: Write error
==> ERROR: Early uncompressed CPIO image generation FAILED: 'bsdtar (step 1)' reported an error
błąd: komenda nie wykonała się poprawnie"... being a Linux user is sort of like living in a house inhabited by a large family of carpenters and architects. Every morning when you wake up, the house is a little different. Maybe there is a new turret, or some walls have moved. Or perhaps someone has temporarily removed the floor under your bed."
MSI Raider GE78HX 13VI-032PL
Offline
#4 2024-04-19 20:14:53
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,666
Re: Errors when trying to install Linux-zen kernel
"LC_ALL=C"
CAT: Save error: no space on the device
BSDTAR: Write Error
BSDTAR: Write Error
==> Error: Early Uncompressed CPIO IMAGE generation Failed: 'BSDTAR (STEP 1)' Reported An Error
Error: The command was not done correctlythe /boot partition is full, https://bbs.archlinux.org/viewtopic.php?id=295026
Online
#5 2024-04-19 20:28:14
- Zibi1981
- Member
- From: Poland
- Registered: 2008-01-31
- Posts: 644
Re: Errors when trying to install Linux-zen kernel
Another one...
# LC_ALL=C pacman -S linux-zen linux-zen-headers nvidia-dkms
warning: linux-zen-6.8.7.zen1-1 is up to date -- reinstalling
warning: linux-zen-headers-6.8.7.zen1-1 is up to date -- reinstalling
warning: nvidia-dkms-550.67-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Package (3) Old Version New Version Net Change
extra/linux-zen 6.8.7.zen1-1 6.8.7.zen1-1 0.00 MiB
extra/linux-zen-headers 6.8.7.zen1-1 6.8.7.zen1-1 0.00 MiB
extra/nvidia-dkms 550.67-1 550.67-1 0.00 MiB
Total Installed Size: 336.61 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] y
(3/3) checking keys in keyring [####################################] 100%
(3/3) checking package integrity [####################################] 100%
(3/3) loading package files [####################################] 100%
(3/3) checking for file conflicts [####################################] 100%
(3/3) checking available disk space [####################################] 100%
:: Running pre-transaction hooks...
(1/1) Remove upgraded DKMS modules
==> dkms remove --no-depmod nvidia/550.67 -k 6.8.7-arch1-1
==> dkms remove --no-depmod nvidia/550.67 -k 6.8.7-zen1-1-zen
==> dkms remove --no-depmod acpi_ec/r28.75102ce -k 6.8.7-zen1-1-zen
:: Processing package changes...
(1/3) reinstalling linux-zen [####################################] 100%
(2/3) reinstalling linux-zen-headers [####################################] 100%
(3/3) reinstalling nvidia-dkms [####################################] 100%
:: Running post-transaction hooks...
(1/4) Arming ConditionNeedsUpdate...
(2/4) Updating module dependencies...
(3/4) Install DKMS modules
==> dkms install --no-depmod nvidia/550.67 -k 6.8.7-arch1-1
==> dkms install --no-depmod nvidia/550.67 -k 6.8.7-zen1-1-zen
==> dkms install --no-depmod acpi_ec/r28.75102ce -k 6.8.7-zen1-1-zen
==> depmod 6.8.7-arch1-1
==> depmod 6.8.7-zen1-1-zen
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
depmod: ERROR: zstd: Restored data doesn't match checksum
==> ERROR: Missing 6.8.5-arch1-1 kernel modules tree for module nvidia/550.67.
(4/4) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen.img
==> Starting build: '6.8.7-zen1-1-zen'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
-> Running build hook: [plymouth]
==> Generating module dependencies
==> Creating lz4-compressed initcpio image: '/boot/initramfs-linux-zen.img'
-> Early uncompressed CPIO image generation successful
==> Initcpio image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux -g /boot/initramfs-linux.img
==> ERROR: specified kernel image does not exist: '/boot/vmlinuz-linux'
error: command failed to execute correctly"... being a Linux user is sort of like living in a house inhabited by a large family of carpenters and architects. Every morning when you wake up, the house is a little different. Maybe there is a new turret, or some walls have moved. Or perhaps someone has temporarily removed the floor under your bed."
MSI Raider GE78HX 13VI-032PL
Offline
#6 2024-04-19 20:33:34
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,436
Re: Errors when trying to install Linux-zen kernel
Is the system overclocked? https://bbs.archlinux.org/viewtopic.php?id=290093
Offline
#7 2024-04-19 20:35:21
- Zibi1981
- Member
- From: Poland
- Registered: 2008-01-31
- Posts: 644
Re: Errors when trying to install Linux-zen kernel
No it isn't, at least not by me. My CPU has it's own factory "boost" though.
"... being a Linux user is sort of like living in a house inhabited by a large family of carpenters and architects. Every morning when you wake up, the house is a little different. Maybe there is a new turret, or some walls have moved. Or perhaps someone has temporarily removed the floor under your bed."
MSI Raider GE78HX 13VI-032PL
Offline
#8 2024-04-19 20:47:00
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,666
Re: Errors when trying to install Linux-zen kernel
And if you unfactoryboost it?
https://www.radgametools.com/oodleintel.htm
Online
#9 2024-04-19 21:09:51
- Zibi1981
- Member
- From: Poland
- Registered: 2008-01-31
- Posts: 644
Re: Errors when trying to install Linux-zen kernel
I'm not sure if I could do that - on this laptop I have a mechanism called MSI OverBoost Ultra. I haven't seen any UEFI option to turn it off.
"... being a Linux user is sort of like living in a house inhabited by a large family of carpenters and architects. Every morning when you wake up, the house is a little different. Maybe there is a new turret, or some walls have moved. Or perhaps someone has temporarily removed the floor under your bed."
MSI Raider GE78HX 13VI-032PL
Offline
#10 2024-04-19 21:15:45
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,666
Re: Errors when trying to install Linux-zen kernel
Online
#11 2024-04-21 08:03:24
- Zibi1981
- Member
- From: Poland
- Registered: 2008-01-31
- Posts: 644
Re: Errors when trying to install Linux-zen kernel
I think I'll give it up.
"... being a Linux user is sort of like living in a house inhabited by a large family of carpenters and architects. Every morning when you wake up, the house is a little different. Maybe there is a new turret, or some walls have moved. Or perhaps someone has temporarily removed the floor under your bed."
MSI Raider GE78HX 13VI-032PL
Offline
#12 2024-04-21 13:44:56
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,666
Re: Errors when trying to install Linux-zen kernel
If you decide to un-giveup, feel free to ask for help if you get stuck.
The principal idea is to limit the maxmum frequency well into the "safe" territory to see whether that prevents what are most likey RAM issues.
Ideally you'd do that in teh UEFI, but if that's not possible, you can at least do it on the OS level (what's still not gonna help w/ your decompression issues when booting the system - but at least we'd know what to focus on)
Online
#13 2024-04-21 14:17:18
- Zibi1981
- Member
- From: Poland
- Registered: 2008-01-31
- Posts: 644
Re: Errors when trying to install Linux-zen kernel
I've read before about the instability issues on the last two Intel CPU generations, and I have some problems with Linux on my new laptop almost from the beginning. Yes, the decompression of the kernel/initramfs gives me some booting-time related hangups from time to time, but I've been able to discover that it's less frequently happening when I choosed the lz4 compression algorithm.
I guess I have to wait till MSI will release new UEFI version with "Intel fail-safe" or similar option, as some other vendors did. Installing linux-zen kernel is not a priority for me at the moment.
"... being a Linux user is sort of like living in a house inhabited by a large family of carpenters and architects. Every morning when you wake up, the house is a little different. Maybe there is a new turret, or some walls have moved. Or perhaps someone has temporarily removed the floor under your bed."
MSI Raider GE78HX 13VI-032PL
Offline