You are not logged in.

Pages: 1

#1 2024-04-27 16:47:30

hikmateustad
Member
Registered: 2022-01-23
Posts: 91

Startx does not work after kernel upgrade [Solved]

I had 64bit Arch Linux Zen Kernel 6.8.6 working. I have both Intel and Nvidia graphics card. Upgraded to 6.8.7 successfully with no dkms errors and rebooted to find that my gui did not start. Switched to console, logged in and entered startx to find the errors as in the log provided

Initial error was 

xf86enableio operation not permitted 000-03ff 
[   223.839] 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[   223.839] Current Operating System: Linux hikmateustad-dell 6.8.7-zen1-2-zen #1 ZEN SMP PREEMPT_DYNAMIC Fri, 19 Apr 2024 09:51:33 +0000 x86_64
[   223.839] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-zen root=UUID=d6f6d2ae-57c9-4961-bdb1-716f0f93b378 rw quiet loglevel=3 audit=0 nowatchdog mitigations=off irqpoll ipv6.disable=1
[   223.839]  
[   223.839] Current version of pixman: 0.43.4
[   223.839] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   223.839] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   223.839] (==) Log file: "/home/hikmateustad/.local/share/xorg/Xorg.1.log", Time: Sat Apr 27 21:40:31 2024
[   223.839] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   223.840] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   223.840] (==) ServerLayout "layout"
[   223.840] (**) |-->Screen "nvidia" (0)
[   223.840] (**) |   |-->Monitor "<default monitor>"
[   223.840] (**) |   |-->Device "nvidia"
[   223.840] (**) |   |-->GPUDevice "integrated"
[   223.840] (==) No monitor specified for screen "nvidia".
	Using a default monitor configuration.
[   223.840] (**) |-->Inactive Device "integrated"
[   223.840] (**) Option "IgnoreABI" "1"
[   223.840] (**) Ignoring ABI Version
[   223.840] (**) Allowing byte-swapped clients
[   223.840] (==) Automatically adding devices
[   223.840] (==) Automatically enabling devices
[   223.840] (==) Automatically adding GPU devices
[   223.840] (==) Automatically binding GPU devices
[   223.840] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   223.840] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   223.840] 	Entry deleted from font path.
[   223.840] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   223.840] 	Entry deleted from font path.
[   223.840] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[   223.840] (**) ModulePath set to "/usr/lib/nvidia,/usr/lib32/nvidia,/usr/lib32/nvidia/xorg/modules,/usr/lib32/xorg/modules,/usr/lib64/nvidia/xorg/modules,/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[   223.840] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   223.840] (II) Module ABI versions:
[   223.840] 	X.Org ANSI C Emulation: 0.4
[   223.840] 	X.Org Video Driver: 25.2
[   223.840] 	X.Org XInput driver : 24.4
[   223.840] 	X.Org Server Extension : 10.0
[   223.840] (++) using VT number 3

[   223.841] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_34
[   223.842] (II) xfree86: Adding drm device (/dev/dri/card1)
[   223.842] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[   223.842] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[   223.845] (--) PCI:*(0@0:2:0) 8086:0102:1028:0511 rev 9, Mem @ 0xfb400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   223.845] (--) PCI: (1@0:0:0) 10de:0df5:1028:0511 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   223.845] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   223.845] (II) LoadModule: "glx"
[   223.845] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[   223.848] (II) Module glx: vendor="NVIDIA Corporation"
[   223.848] 	compiled for 4.0.2, module version = 1.0.0
[   223.848] 	Module class: X.Org Server Extension
[   223.848] (II) NVIDIA GLX Module  390.157  Wed Oct 12 09:19:15 UTC 2022
[   223.848] (II) LoadModule: "nvidia"
[   223.848] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[   223.849] (II) Module nvidia: vendor="NVIDIA Corporation"
[   223.849] 	compiled for 4.0.2, module version = 1.0.0
[   223.849] 	Module class: X.Org Video Driver
[   223.849] (II) LoadModule: "modesetting"
[   223.849] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[   223.849] (II) Module modesetting: vendor="X.Org Foundation"
[   223.849] 	compiled for 1.21.1.13, module version = 1.21.1
[   223.849] 	Module class: X.Org Video Driver
[   223.849] 	ABI class: X.Org Video Driver, version 25.2
[   223.849] (II) NVIDIA dlloader X Driver  390.157  Wed Oct 12 09:21:41 UTC 2022
[   223.849] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   223.849] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   223.849] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[   223.849] (II) Loading sub module "fb"
[   223.849] (II) LoadModule: "fb"
[   223.849] (II) Module "fb" already built-in
[   223.849] (II) Loading sub module "wfb"
[   223.849] (II) LoadModule: "wfb"
[   223.849] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[   223.850] (II) Module wfb: vendor="X.Org Foundation"
[   223.850] 	compiled for 1.21.1.13, module version = 1.0.0
[   223.850] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   223.850] (II) Loading sub module "ramdac"
[   223.850] (II) LoadModule: "ramdac"
[   223.850] (II) Module "ramdac" already built-in
[   223.850] (II) modeset(G0): using drv /dev/dri/card1
[   223.850] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   223.850] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"nvidia" for depth/fbbpp 24/32
[   223.850] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   223.850] (==) NVIDIA(0): RGB weight 888
[   223.850] (==) NVIDIA(0): Default visual is TrueColor
[   223.850] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   223.850] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[   223.850] (**) NVIDIA(0): Option "Coolbits" "28"
[   223.850] (**) NVIDIA(0): Enabling 2D acceleration
[   223.853] (II) NVIDIA(0): NVIDIA GPU GeForce GT 525M (GF108) at PCI:1:0:0 (GPU-0)
[   223.853] (--) NVIDIA(0): Memory: 1048576 kBytes
[   223.853] (--) NVIDIA(0): VideoBIOS: 70.08.5f.00.01
[   223.853] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   223.853] (II) NVIDIA(0): Validated MetaModes:
[   223.853] (II) NVIDIA(0):     "NULL"
[   223.853] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[   223.853] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[   223.853] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[   223.853] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[   223.853] (==) modeset(G0): RGB weight 888
[   223.853] (==) modeset(G0): Default visual is TrueColor
[   223.853] (II) Loading sub module "glamoregl"
[   223.853] (II) LoadModule: "glamoregl"
[   223.853] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[   223.857] (II) Module glamoregl: vendor="X.Org Foundation"
[   223.857] 	compiled for 1.21.1.13, module version = 1.0.1
[   223.857] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   223.873] (II) modeset(G0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 2000 (SNB GT1)
[   223.873] (II) modeset(G0): glamor initialized
[   223.874] (II) modeset(G0): Output VGA-1-1 has no monitor section
[   223.875] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[   223.875] (II) modeset(G0): Output DP-1-1 has no monitor section
[   223.902] (II) modeset(G0): Output HDMI-1-2 has no monitor section
[   224.002] (II) modeset(G0): Output DP-1-2 has no monitor section
[   224.003] (II) modeset(G0): EDID for output VGA-1-1
[   224.004] (II) modeset(G0): EDID for output HDMI-1-1
[   224.004] (II) modeset(G0): EDID for output DP-1-1
[   224.031] (II) modeset(G0): EDID for output HDMI-1-2
[   224.031] (II) modeset(G0): Manufacturer: DEL  Model: b123  Serial#: 1000001
[   224.031] (II) modeset(G0): Year: 2011  Week: 30
[   224.031] (II) modeset(G0): EDID Version: 1.3
[   224.031] (II) modeset(G0): Digital Display Input
[   224.031] (II) modeset(G0): Max Image Size [cm]: horiz.: 51  vert.: 29
[   224.031] (II) modeset(G0): Gamma: 2.20
[   224.031] (II) modeset(G0): No DPMS capabilities specified
[   224.031] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   224.031] (II) modeset(G0): First detailed timing is preferred mode
[   224.031] (II) modeset(G0): redX: 0.628 redY: 0.348   greenX: 0.345 greenY: 0.615
[   224.031] (II) modeset(G0): blueX: 0.153 blueY: 0.057   whiteX: 0.313 whiteY: 0.329
[   224.031] (II) modeset(G0): Supported established timings:
[   224.031] (II) modeset(G0): 640x480@60Hz
[   224.031] (II) modeset(G0): 800x600@60Hz
[   224.031] (II) modeset(G0): 1024x768@60Hz
[   224.031] (II) modeset(G0): Manufacturer's mask: 0
[   224.031] (II) modeset(G0): Supported standard timings:
[   224.031] (II) modeset(G0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[   224.031] (II) modeset(G0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[   224.031] (II) modeset(G0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   224.031] (II) modeset(G0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[   224.031] (II) modeset(G0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[   224.031] (II) modeset(G0): Supported detailed timing:
[   224.031] (II) modeset(G0): clock: 148.5 MHz   Image Size:  510 x 287 mm
[   224.031] (II) modeset(G0): h_active: 1920  h_sync: 2068  h_sync_end 2112 h_blank_end 2200 h_border: 0
[   224.031] (II) modeset(G0): v_active: 1080  v_sync: 1116  v_sync_end 1121 v_blanking: 1125 v_border: 0
[   224.031] (II) modeset(G0): Monitor name: 23" AIO
[   224.031] (II) modeset(G0): Ranges: V min: 49 V max: 75 Hz, H min: 28 H max: 95 kHz, PixClock max 215 MHz
[   224.031] (II) modeset(G0): Supported detailed timing:
[   224.031] (II) modeset(G0): clock: 148.5 MHz   Image Size:  510 x 287 mm
[   224.031] (II) modeset(G0): h_active: 1920  h_sync: 2068  h_sync_end 2112 h_blank_end 2640 h_border: 0
[   224.031] (II) modeset(G0): v_active: 1080  v_sync: 1116  v_sync_end 1121 v_blanking: 1125 v_border: 0
[   224.031] (II) modeset(G0): Monitor name: 23" AIO
[   224.031] (II) modeset(G0): Ranges: V min: 49 V max: 75 Hz, H min: 28 H max: 95 kHz, PixClock max 215 MHz
[   224.031] (II) modeset(G0): Number of EDID sections to follow: 1
[   224.031] (II) modeset(G0): EDID (in hex):
[   224.031] (II) modeset(G0): 	00ffffffffffff0010ac23b141420f00
[   224.031] (II) modeset(G0): 	1e15010380331d780ac665a059589d27
[   224.031] (II) modeset(G0): 	0e5054210800d1c081c081809500b300
[   224.031] (II) modeset(G0): 	010101010101023a801871382d40942c
[   224.031] (II) modeset(G0): 	4508fe1f1100001e0000001000001b30
[   224.031] (II) modeset(G0): 	40703600fe1f1100001e000000fc0032
[   224.031] (II) modeset(G0): 	33222041494f0a2020202020000000fd
[   224.031] (II) modeset(G0): 	00314b1c5f15000a2020202020200155
[   224.031] (II) modeset(G0): 	02031370230907078301000065030c00
[   224.031] (II) modeset(G0): 	100000023a80d072382d40942c4508fe
[   224.031] (II) modeset(G0): 	1f1100001e000000fc00323322204149
[   224.031] (II) modeset(G0): 	4f0a2020202020000000fd00314b1c5f
[   224.031] (II) modeset(G0): 	15000a20202020202000000010002100
[   224.031] (II) modeset(G0): 	001e0000001000d01e206e0000001000
[   224.031] (II) modeset(G0): 	2100001e00000010001c162010000000
[   224.031] (II) modeset(G0): 	10002100009a000000000000000000da
[   224.031] (II) modeset(G0): Printing probed modes for output HDMI-1-2
[   224.031] (II) modeset(G0): Modeline "1920x1080"x60.0  148.50  1920 2068 2112 2200  1080 1116 1121 1125 +hsync +vsync (67.5 kHz eP)
[   224.031] (II) modeset(G0): Modeline "1920x1080"x50.0  148.50  1920 2068 2112 2640  1080 1116 1121 1125 +hsync +vsync (56.2 kHz e)
[   224.031] (II) modeset(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   224.031] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   224.031] (II) modeset(G0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   224.031] (II) modeset(G0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   224.031] (II) modeset(G0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   224.031] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   224.031] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   224.031] (II) modeset(G0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   224.031] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   224.131] (II) modeset(G0): EDID for output DP-1-2
[   224.131] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[   224.131] (==) modeset(G0): DPI set to (96, 96)
[   224.131] (II) Loading sub module "fb"
[   224.131] (II) LoadModule: "fb"
[   224.131] (II) Module "fb" already built-in
[   224.131] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[   224.131] (II) NVIDIA:     access.
[   224.134] (WW) NVIDIA(0): ACPI: AC power state information is not available under
[   224.134] (WW) NVIDIA(0):     /sys/class/power_supply/ , nor under
[   224.134] (WW) NVIDIA(0):     /proc/acpi/ac_adapter/
[   224.134] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   224.134] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   224.134] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   224.134] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   224.134] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   224.134] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   224.134] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   224.134] (II) NVIDIA(0):     Config Options in the README.
[   224.160] (II) NVIDIA(0): Setting mode "NULL"
[   224.164] (==) NVIDIA(0): Disabling shared memory pixmaps
[   224.164] (==) NVIDIA(0): Backing store enabled
[   224.164] (==) NVIDIA(0): Silken mouse enabled
[   224.164] (==) NVIDIA(0): DPMS enabled
[   224.164] (II) Loading sub module "dri2"
[   224.164] (II) LoadModule: "dri2"
[   224.164] (II) Module "dri2" already built-in
[   224.164] (II) NVIDIA(0): [DRI2] Setup complete
[   224.164] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   224.253] (==) modeset(G0): Backing store enabled
[   224.253] (==) modeset(G0): Silken mouse enabled
[   224.359] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[   224.359] (==) modeset(G0): DPMS enabled
[   224.359] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[   224.359] (II) modeset(G0): [DRI2] Setup complete
[   224.359] (II) modeset(G0): [DRI2]   DRI driver: i965
[   224.359] (II) modeset(G0): [DRI2]   VDPAU driver: va_gl
[   224.359] (II) modeset(G0): Disable reverse prime offload mode for i915.
[   224.359] (II) Initializing extension Generic Event Extension
[   224.359] (II) Initializing extension SHAPE
[   224.359] (II) Initializing extension MIT-SHM
[   224.359] (II) Initializing extension XInputExtension
[   224.359] (II) Initializing extension XTEST
[   224.360] (II) Initializing extension BIG-REQUESTS
[   224.360] (II) Initializing extension SYNC
[   224.360] (II) Initializing extension XKEYBOARD
[   224.360] (II) Initializing extension XC-MISC
[   224.360] (II) Initializing extension SECURITY
[   224.360] (II) Initializing extension XFIXES
[   224.360] (II) Initializing extension RENDER
[   224.360] (II) Initializing extension RANDR
[   224.360] (II) Initializing extension COMPOSITE
[   224.360] (II) Initializing extension DAMAGE
[   224.361] (II) Initializing extension MIT-SCREEN-SAVER
[   224.361] (II) Initializing extension DOUBLE-BUFFER
[   224.361] (II) Initializing extension RECORD
[   224.361] (II) Initializing extension DPMS
[   224.361] (II) Initializing extension Present
[   224.361] (II) Initializing extension DRI3
[   224.361] (II) Initializing extension X-Resource
[   224.361] (II) Initializing extension XVideo
[   224.361] (II) Initializing extension XVideo-MotionCompensation
[   224.361] (II) Initializing extension XFree86-VidModeExtension
[   224.361] (II) Initializing extension XFree86-DGA
[   224.361] (II) Initializing extension XFree86-DRI
[   224.361] (II) Initializing extension DRI2
[   224.362] (II) Initializing extension GLX
[   224.362] (II) Initializing extension GLX
[   224.362] (II) Indirect GLX disabled.
[   224.362] (II) Initializing extension NV-GLX
[   224.362] (II) Initializing extension NV-CONTROL
[   224.427] (II) modeset(G0): Damage tracking initialized
[   224.505] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   224.505] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   224.505] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   224.505] (**) Power Button: Applying InputClass "system-keyboard"
[   224.505] (II) LoadModule: "libinput"
[   224.506] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[   224.507] (II) Module libinput: vendor="X.Org Foundation"
[   224.507] 	compiled for 1.21.1.8, module version = 1.4.0
[   224.507] 	Module class: X.Org XInput Driver
[   224.507] 	ABI class: X.Org XInput driver, version 24.4
[   224.507] (II) Using input driver 'libinput' for 'Power Button'
[   224.508] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 38 paused 0
[   224.508] (**) Power Button: always reports core events
[   224.508] (**) Option "Device" "/dev/input/event1"
[   224.510] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   224.510] (II) event1  - Power Button: device is a keyboard
[   224.510] (II) event1  - Power Button: device removed
[   224.510] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[   224.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   224.510] (**) Option "xkb_layout" "us"
[   224.511] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   224.511] (II) event1  - Power Button: device is a keyboard
[   224.512] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[   224.512] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   224.512] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   224.512] (**) Video Bus: Applying InputClass "system-keyboard"
[   224.512] (II) Using input driver 'libinput' for 'Video Bus'
[   224.512] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 41 paused 0
[   224.512] (**) Video Bus: always reports core events
[   224.512] (**) Option "Device" "/dev/input/event9"
[   224.513] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[   224.513] (II) event9  - Video Bus: device is a keyboard
[   224.513] (II) event9  - Video Bus: device removed
[   224.513] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12/event9"
[   224.513] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   224.513] (**) Option "xkb_layout" "us"
[   224.514] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[   224.514] (II) event9  - Video Bus: device is a keyboard
[   224.515] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[   224.515] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   224.515] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   224.515] (**) Video Bus: Applying InputClass "system-keyboard"
[   224.515] (II) Using input driver 'libinput' for 'Video Bus'
[   224.516] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 42 paused 0
[   224.516] (**) Video Bus: always reports core events
[   224.516] (**) Option "Device" "/dev/input/event8"
[   224.517] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[   224.517] (II) event8  - Video Bus: device is a keyboard
[   224.517] (II) event8  - Video Bus: device removed
[   224.517] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input11/event8"
[   224.517] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   224.517] (**) Option "xkb_layout" "us"
[   224.518] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[   224.518] (II) event8  - Video Bus: device is a keyboard
[   224.519] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   224.519] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   224.519] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   224.519] (**) Power Button: Applying InputClass "system-keyboard"
[   224.519] (II) Using input driver 'libinput' for 'Power Button'
[   224.519] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 43 paused 0
[   224.519] (**) Power Button: always reports core events
[   224.519] (**) Option "Device" "/dev/input/event0"
[   224.520] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   224.520] (II) event0  - Power Button: device is a keyboard
[   224.520] (II) event0  - Power Button: device removed
[   224.520] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   224.520] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[   224.520] (**) Option "xkb_layout" "us"
[   224.521] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   224.521] (II) event0  - Power Button: device is a keyboard
[   224.522] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[   224.522] (II) No input driver specified, ignoring this device.
[   224.522] (II) This device may have been added with another device file.
[   224.522] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[   224.522] (II) No input driver specified, ignoring this device.
[   224.522] (II) This device may have been added with another device file.
[   224.523] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[   224.523] (II) No input driver specified, ignoring this device.
[   224.523] (II) This device may have been added with another device file.
[   224.523] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[   224.523] (II) No input driver specified, ignoring this device.
[   224.523] (II) This device may have been added with another device file.
[   224.524] (II) config/udev: Adding input device Quanta OpticalTouchScreen (/dev/input/event2)
[   224.524] (**) Quanta OpticalTouchScreen: Applying InputClass "evdev touchscreen catchall"
[   224.524] (**) Quanta OpticalTouchScreen: Applying InputClass "libinput touchscreen catchall"
[   224.524] (**) Quanta OpticalTouchScreen: Applying InputClass "calibration"
[   224.524] (II) Using input driver 'libinput' for 'Quanta OpticalTouchScreen'
[   224.576] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 44 paused 0
[   224.576] (**) Quanta OpticalTouchScreen: always reports core events
[   224.576] (**) Option "Device" "/dev/input/event2"
[   224.577] (II) event2  - Quanta OpticalTouchScreen: is tagged by udev as: Touchscreen
[   224.578] (II) event2  - Quanta OpticalTouchScreen: device is a touch device
[   224.578] (II) event2  - Quanta OpticalTouchScreen: device removed
[   224.578] (**) Option "CalibrationMatrix" "0.9999995761449282 0.0 -0.0018230372996700381 0.0 0.9982293340271491 -0.00027724331249288036 0.0 0.0 1.0"
[   224.578] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0408:3008.0001/input/input5/event2"
[   224.578] (II) XINPUT: Adding extended input device "Quanta OpticalTouchScreen" (type: TOUCHSCREEN, id 10)
[   224.578] (**) Option "AccelerationScheme" "none"
[   224.578] (**) Quanta OpticalTouchScreen: (accel) selected scheme none/0
[   224.578] (**) Quanta OpticalTouchScreen: (accel) acceleration factor: 2.000
[   224.578] (**) Quanta OpticalTouchScreen: (accel) acceleration threshold: 4
[   224.579] (II) event2  - Quanta OpticalTouchScreen: is tagged by udev as: Touchscreen
[   224.580] (II) event2  - Quanta OpticalTouchScreen: device is a touch device
[   224.580] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[   224.580] (II) No input driver specified, ignoring this device.
[   224.580] (II) This device may have been added with another device file.
[   224.580] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event15)
[   224.580] (II) No input driver specified, ignoring this device.
[   224.580] (II) This device may have been added with another device file.
[   224.581] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[   224.581] (II) No input driver specified, ignoring this device.
[   224.581] (II) This device may have been added with another device file.
[   224.581] (II) config/udev: Adding input device SEM USB Keyboard (/dev/input/event3)
[   224.581] (**) SEM USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   224.581] (**) SEM USB Keyboard: Applying InputClass "libinput keyboard catchall"
[   224.581] (**) SEM USB Keyboard: Applying InputClass "system-keyboard"
[   224.581] (II) Using input driver 'libinput' for 'SEM USB Keyboard'
[   224.582] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 45 paused 0
[   224.582] (**) SEM USB Keyboard: always reports core events
[   224.582] (**) Option "Device" "/dev/input/event3"
[   224.583] (II) event3  - SEM USB Keyboard: is tagged by udev as: Keyboard
[   224.584] (II) event3  - SEM USB Keyboard: device is a keyboard
[   224.584] (II) event3  - SEM USB Keyboard: device removed
[   224.584] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:1A2C:2124.0002/input/input6/event3"
[   224.584] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: KEYBOARD, id 11)
[   224.584] (**) Option "xkb_layout" "us"
[   224.585] (II) event3  - SEM USB Keyboard: is tagged by udev as: Keyboard
[   224.585] (II) event3  - SEM USB Keyboard: device is a keyboard
[   224.586] (II) config/udev: Adding input device SEM USB Keyboard Consumer Control (/dev/input/event4)
[   224.586] (**) SEM USB Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[   224.586] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[   224.586] (**) SEM USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[   224.586] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[   224.587] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 46 paused 0
[   224.587] (**) SEM USB Keyboard Consumer Control: always reports core events
[   224.587] (**) Option "Device" "/dev/input/event4"
[   224.588] (II) event4  - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[   224.589] (II) event4  - SEM USB Keyboard Consumer Control: device is a keyboard
[   224.589] (II) event4  - SEM USB Keyboard Consumer Control: device removed
[   224.589] (II) libinput: SEM USB Keyboard Consumer Control: needs a virtual subdevice
[   224.589] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:1A2C:2124.0003/input/input7/event4"
[   224.589] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: MOUSE, id 12)
[   224.589] (**) Option "AccelerationScheme" "none"
[   224.589] (**) SEM USB Keyboard Consumer Control: (accel) selected scheme none/0
[   224.589] (**) SEM USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[   224.589] (**) SEM USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[   224.590] (II) event4  - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[   224.590] (II) event4  - SEM USB Keyboard Consumer Control: device is a keyboard
[   224.591] (II) config/udev: Adding input device SEM USB Keyboard System Control (/dev/input/event5)
[   224.591] (**) SEM USB Keyboard System Control: Applying InputClass "evdev keyboard catchall"
[   224.591] (**) SEM USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[   224.591] (**) SEM USB Keyboard System Control: Applying InputClass "system-keyboard"
[   224.591] (II) Using input driver 'libinput' for 'SEM USB Keyboard System Control'
[   224.592] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 47 paused 0
[   224.592] (**) SEM USB Keyboard System Control: always reports core events
[   224.592] (**) Option "Device" "/dev/input/event5"
[   224.593] (II) event5  - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[   224.594] (II) event5  - SEM USB Keyboard System Control: device is a keyboard
[   224.594] (II) event5  - SEM USB Keyboard System Control: device removed
[   224.594] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:1A2C:2124.0003/input/input8/event5"
[   224.594] (II) XINPUT: Adding extended input device "SEM USB Keyboard System Control" (type: KEYBOARD, id 13)
[   224.594] (**) Option "xkb_layout" "us"
[   224.595] (II) event5  - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[   224.595] (II) event5  - SEM USB Keyboard System Control: device is a keyboard
[   224.596] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/event6)
[   224.596] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[   224.596] (**)  USB OPTICAL MOUSE: Applying InputClass "libinput pointer catchall"
[   224.596] (II) Using input driver 'libinput' for ' USB OPTICAL MOUSE'
[   224.649] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 48 paused 0
[   224.649] (**)  USB OPTICAL MOUSE: always reports core events
[   224.649] (**) Option "Device" "/dev/input/event6"
[   224.650] (II) event6  -  USB OPTICAL MOUSE: is tagged by udev as: Mouse
[   224.650] (II) event6  -  USB OPTICAL MOUSE: device is a pointer
[   224.650] (II) event6  -  USB OPTICAL MOUSE: device removed
[   224.650] (II) libinput:  USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[   224.650] (II) libinput:  USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[   224.650] (II) libinput:  USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[   224.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:0000:3825.0004/input/input9/event6"
[   224.650] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 14)
[   224.651] (**) Option "AccelerationScheme" "none"
[   224.651] (**)  USB OPTICAL MOUSE: (accel) selected scheme none/0
[   224.651] (**)  USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[   224.651] (**)  USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[   224.652] (II) event6  -  USB OPTICAL MOUSE: is tagged by udev as: Mouse
[   224.652] (II) event6  -  USB OPTICAL MOUSE: device is a pointer
[   224.655] (II) config/udev: Adding input device Dell AIO WMI hotkeys (/dev/input/event7)
[   224.655] (**) Dell AIO WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   224.655] (**) Dell AIO WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   224.655] (**) Dell AIO WMI hotkeys: Applying InputClass "system-keyboard"
[   224.655] (II) Using input driver 'libinput' for 'Dell AIO WMI hotkeys'
[   224.655] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 49 paused 0
[   224.655] (**) Dell AIO WMI hotkeys: always reports core events
[   224.656] (**) Option "Device" "/dev/input/event7"
[   224.656] (II) event7  - Dell AIO WMI hotkeys: is tagged by udev as: Keyboard
[   224.656] (II) event7  - Dell AIO WMI hotkeys: device is a keyboard
[   224.656] (II) event7  - Dell AIO WMI hotkeys: device removed
[   224.656] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event7"
[   224.656] (II) XINPUT: Adding extended input device "Dell AIO WMI hotkeys" (type: KEYBOARD, id 15)
[   224.656] (**) Option "xkb_layout" "us"
[   224.657] (II) event7  - Dell AIO WMI hotkeys: is tagged by udev as: Keyboard
[   224.657] (II) event7  - Dell AIO WMI hotkeys: device is a keyboard
[   224.658] (II) config/udev: Adding input device Virtual TouchCursor Keyboard (/dev/input/event17)
[   224.658] (**) Virtual TouchCursor Keyboard: Applying InputClass "evdev pointer catchall"
[   224.658] (**) Virtual TouchCursor Keyboard: Applying InputClass "evdev keyboard catchall"
[   224.658] (**) Virtual TouchCursor Keyboard: Applying InputClass "libinput pointer catchall"
[   224.658] (**) Virtual TouchCursor Keyboard: Applying InputClass "libinput keyboard catchall"
[   224.658] (**) Virtual TouchCursor Keyboard: Applying InputClass "system-keyboard"
[   224.658] (II) Using input driver 'libinput' for 'Virtual TouchCursor Keyboard'
[   224.658] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 50 paused 0
[   224.658] (**) Virtual TouchCursor Keyboard: always reports core events
[   224.658] (**) Option "Device" "/dev/input/event17"
[   224.659] (II) event17 - Virtual TouchCursor Keyboard: is tagged by udev as: Keyboard Mouse
[   224.659] (II) event17 - Virtual TouchCursor Keyboard: device is a pointer
[   224.659] (II) event17 - Virtual TouchCursor Keyboard: device is a keyboard
[   224.659] (II) event17 - Virtual TouchCursor Keyboard: device removed
[   224.659] (II) libinput: Virtual TouchCursor Keyboard: needs a virtual subdevice
[   224.659] (**) Option "config_info" "udev:/sys/devices/virtual/input/input21/event17"
[   224.659] (II) XINPUT: Adding extended input device "Virtual TouchCursor Keyboard" (type: MOUSE, id 16)
[   224.659] (**) Option "AccelerationScheme" "none"
[   224.659] (**) Virtual TouchCursor Keyboard: (accel) selected scheme none/0
[   224.659] (**) Virtual TouchCursor Keyboard: (accel) acceleration factor: 2.000
[   224.659] (**) Virtual TouchCursor Keyboard: (accel) acceleration threshold: 4
[   224.660] (II) event17 - Virtual TouchCursor Keyboard: is tagged by udev as: Keyboard Mouse
[   224.660] (II) event17 - Virtual TouchCursor Keyboard: device is a pointer
[   224.660] (II) event17 - Virtual TouchCursor Keyboard: device is a keyboard
[   224.664] (**) SEM USB Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[   224.664] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[   224.664] (**) SEM USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[   224.664] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[   224.665] (II) systemd-logind: returning pre-existing fd for /dev/input/event4 13:68
[   224.665] (**) SEM USB Keyboard Consumer Control: always reports core events
[   224.665] (**) Option "Device" "/dev/input/event4"
[   224.665] (II) libinput: SEM USB Keyboard Consumer Control: is a virtual subdevice
[   224.665] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:1A2C:2124.0003/input/input7/event4"
[   224.665] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: KEYBOARD, id 17)
[   224.665] (**) Option "xkb_layout" "us"
[   224.665] (**) Virtual TouchCursor Keyboard: Applying InputClass "evdev pointer catchall"
[   224.665] (**) Virtual TouchCursor Keyboard: Applying InputClass "evdev keyboard catchall"
[   224.665] (**) Virtual TouchCursor Keyboard: Applying InputClass "libinput pointer catchall"
[   224.665] (**) Virtual TouchCursor Keyboard: Applying InputClass "libinput keyboard catchall"
[   224.665] (**) Virtual TouchCursor Keyboard: Applying InputClass "system-keyboard"
[   224.665] (II) Using input driver 'libinput' for 'Virtual TouchCursor Keyboard'
[   224.665] (II) systemd-logind: returning pre-existing fd for /dev/input/event17 13:81
[   224.665] (**) Virtual TouchCursor Keyboard: always reports core events
[   224.665] (**) Option "Device" "/dev/input/event17"
[   224.665] (II) libinput: Virtual TouchCursor Keyboard: is a virtual subdevice
[   224.665] (**) Option "config_info" "udev:/sys/devices/virtual/input/input21/event17"
[   224.665] (II) XINPUT: Adding extended input device "Virtual TouchCursor Keyboard" (type: KEYBOARD, id 18)
[   224.665] (**) Option "xkb_layout" "us"
[   224.769] (**) Option "fd" "38"
[   224.769] (II) event1  - Power Button: device removed
[   224.769] (**) Option "fd" "41"
[   224.769] (II) event9  - Video Bus: device removed
[   224.769] (**) Option "fd" "42"
[   224.769] (II) event8  - Video Bus: device removed
[   224.769] (**) Option "fd" "43"
[   224.769] (II) event0  - Power Button: device removed
[   224.769] (**) Option "fd" "44"
[   224.769] (II) event2  - Quanta OpticalTouchScreen: device removed
[   224.769] (**) Option "fd" "45"
[   224.769] (II) event3  - SEM USB Keyboard: device removed
[   224.769] (**) Option "fd" "46"
[   224.769] (**) Option "fd" "47"
[   224.769] (II) event5  - SEM USB Keyboard System Control: device removed
[   224.770] (**) Option "fd" "48"
[   224.770] (II) event6  -  USB OPTICAL MOUSE: device removed
[   224.770] (**) Option "fd" "49"
[   224.770] (II) event7  - Dell AIO WMI hotkeys: device removed
[   224.770] (**) Option "fd" "50"
[   224.770] (**) Option "fd" "46"
[   224.770] (II) event4  - SEM USB Keyboard Consumer Control: device removed
[   224.770] (**) Option "fd" "50"
[   224.770] (II) event17 - Virtual TouchCursor Keyboard: device removed
[   224.771] (II) UnloadModule: "libinput"
[   224.771] (II) systemd-logind: not releasing fd for 13:81, still in use
[   224.771] (II) UnloadModule: "libinput"
[   224.771] (II) systemd-logind: not releasing fd for 13:68, still in use
[   224.771] (II) UnloadModule: "libinput"
[   224.771] (II) systemd-logind: releasing fd for 13:81
[   224.771] (II) UnloadModule: "libinput"
[   224.771] (II) systemd-logind: releasing fd for 13:71
[   224.771] (II) UnloadModule: "libinput"
[   224.771] (II) systemd-logind: releasing fd for 13:70
[   224.772] (II) UnloadModule: "libinput"
[   224.772] (II) systemd-logind: releasing fd for 13:69
[   224.772] (II) UnloadModule: "libinput"
[   224.772] (II) systemd-logind: releasing fd for 13:68
[   224.773] (II) UnloadModule: "libinput"
[   224.773] (II) systemd-logind: releasing fd for 13:67
[   224.773] (II) UnloadModule: "libinput"
[   224.773] (II) systemd-logind: releasing fd for 13:66
[   224.773] (II) UnloadModule: "libinput"
[   224.773] (II) systemd-logind: releasing fd for 13:64
[   224.774] (II) UnloadModule: "libinput"
[   224.774] (II) systemd-logind: releasing fd for 13:72
[   224.774] (II) UnloadModule: "libinput"
[   224.774] (II) systemd-logind: releasing fd for 13:73
[   224.775] (II) UnloadModule: "libinput"
[   224.775] (II) systemd-logind: releasing fd for 13:65
[   224.784] (II) NVIDIA(GPU-0): Deleting GPU-0
[   224.858] (II) Server terminated successfully (0). Closing log file.

This is my xinitrc

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

How do I proceed?

Thank you in advance for your time.

Last edited by hikmateustad (2024-04-27 19:57:37)

Offline

#2 2024-04-27 17:24:17

loqs
Member
Registered: 2014-03-06
Posts: 18,782

Re: Startx does not work after kernel upgrade [Solved]

[   224.858] (II) Server terminated successfully (0). Closing log file.

The log does not show any server related issues.

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

Is that the entire contents of ~/.xinitrc?  Was anything else updated at the same time as linux-zen such as python?

Offline

#3 2024-04-27 17:29:59

hikmateustad
Member
Registered: 2022-01-23
Posts: 91

Re: Startx does not work after kernel upgrade [Solved]

loqs wrote:
[   224.858] (II) Server terminated successfully (0). Closing log file.

The log does not show any server related issues.

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

Is that the entire contents of ~/.xinitrc?  Was anything else updated at the same time as linux-zen such as python?

That is all I have in the ~/.xinitrc file.

Yes, you are absolutely right; there were lots of python updates alongside the kernel.

What does that mean?

Offline

#4 2024-04-27 17:41:39

loqs
Member
Registered: 2014-03-06
Posts: 18,782

Re: Startx does not work after kernel upgrade [Solved]

hikmateustad wrote:
loqs wrote:

Is that the entire contents of ~/.xinitrc?  Was anything else updated at the same time as linux-zen such as python?

That is all I have in the ~/.xinitrc file.

Then I would expect startx to behave as you have described as there is nothing for it to continue to execute after the xrandr calls.

hikmateustad wrote:

Yes, you are absolutely right; there were lots of python updates alongside the kernel.
What does that mean?

The cause could be similar to https://bbs.archlinux.org/viewtopic.php … 3#p2167513

Offline

#5 2024-04-27 19:48:51

hikmateustad
Member
Registered: 2022-01-23
Posts: 91

Re: Startx does not work after kernel upgrade [Solved]

loqs wrote:
hikmateustad wrote:
loqs wrote:

Is that the entire contents of ~/.xinitrc?  Was anything else updated at the same time as linux-zen such as python?

That is all I have in the ~/.xinitrc file.

Then I would expect startx to behave as you have described as there is nothing for it to continue to execute after the xrandr calls.

hikmateustad wrote:

Yes, you are absolutely right; there were lots of python updates alongside the kernel.
What does that mean?

The cause could be similar to https://bbs.archlinux.org/viewtopic.php … 3#p2167513


Thank you so much. The similar issue is the one that provided the fix.

So how do I block only and all python updates and still get the kernel upgrades?

Offline

#6 2024-04-27 20:13:05

hikmateustad
Member
Registered: 2022-01-23
Posts: 91

Re: Startx does not work after kernel upgrade [Solved]

hikmateustad wrote:
loqs wrote:
hikmateustad wrote:

That is all I have in the ~/.xinitrc file.

Then I would expect startx to behave as you have described as there is nothing for it to continue to execute after the xrandr calls.

hikmateustad wrote:

Yes, you are absolutely right; there were lots of python updates alongside the kernel.
What does that mean?

The cause could be similar to https://bbs.archlinux.org/viewtopic.php … 3#p2167513


Thank you so much. The similar issue is the one that provided the fix.

So how do I block only and all python updates and still get the kernel upgrades?

Well I first blocked all python updates and got back to the latest kernel upgrade with the same black screen. During this time there was a update to optimus manager which manages Nvidia modules. Then I also updated all the python modules and finally I am back to a healthy system with everything upgraded. Can we just blame the python modules?

Offline

#7 2024-04-27 22:01:36

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,566

Re: Startx does not work after kernel upgrade [Solved]

No, blame the user who didn't take care of their out-of-repo packages. It's YOUR responsibility to rebuild them when necessary, nobody else's.

Offline

Pages: 1

Board footer

Powered by FluxBB