You are not logged in.
- Topics: Active | Unanswered
#1 2024-05-05 14:35:03
- hoover1143
- Member
- Registered: 2024-05-05
- Posts: 3
Logitech Lift USB Mouse Recognized but not Working
I have a Logitech Lift mouse, which lsusb recognizes as :
Bus 003 Device 011: ID 046d:c548 Logitech, Inc. Logi Bolt ReceiverBy mouse not working, I mean I can't move the cursor, and clicks are not recognized, but the device is turned on.
I didn't see any packages relating to the Lift specifically, like there are for the MX Master series.
What are some steps I can take to troubleshoot this? Thanks in advance. My apologies as well if this is a terrible post. It's my first one.
Throwing the lsusb -v output for the device below.
Bus 003 Device 013: ID 046d:c548 Logitech, Inc. Logi Bolt Receiver
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 [unknown]
bDeviceSubClass 0 [unknown]
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x046d Logitech, Inc.
idProduct 0xc548 Logi Bolt Receiver
bcdDevice 5.01
iManufacturer 1 Logitech
iProduct 2 USB Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0054
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 4 MPR05.01_B0010
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 67
Report Descriptor: (length is 67)
Item(Global): Usage Page, data= [ 0x01 ] 1
Generic Desktop Controls
Item(Local ): Usage, data= [ 0x06 ] 6
Keyboard
Item(Main ): Collection, data= [ 0x01 ] 1
Application
Item(Global): Usage Page, data= [ 0x07 ] 7
Keyboard
Item(Local ): Usage Minimum, data= [ 0xe0 ] 224
Control Left
Item(Local ): Usage Maximum, data= [ 0xe7 ] 231
GUI Right
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0x01 ] 1
Item(Global): Report Size, data= [ 0x01 ] 1
Item(Global): Report Count, data= [ 0x08 ] 8
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report Count, data= [ 0x05 ] 5
Item(Global): Usage Page, data= [ 0x08 ] 8
LEDs
Item(Local ): Usage Minimum, data= [ 0x01 ] 1
NumLock
Item(Local ): Usage Maximum, data= [ 0x05 ] 5
Kana
Item(Main ): Output, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Global): Report Size, data= [ 0x03 ] 3
Item(Main ): Output, data= [ 0x03 ] 3
Constant Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report Count, data= [ 0x70 ] 112
Item(Global): Report Size, data= [ 0x01 ] 1
Item(Global): Usage Page, data= [ 0x07 ] 7
Keyboard
Item(Local ): Usage Minimum, data= [ 0x04 ] 4
A
Item(Local ): Usage Maximum, data= [ 0x73 ] 115
F24
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report Count, data= [ 0x05 ] 5
Item(Local ): Usage Minimum, data= [ 0x87 ] 135
International 1 (PC98)
Item(Local ): Usage Maximum, data= [ 0x8b ] 139
International 5 (PC98)
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report Count, data= [ 0x03 ] 3
Item(Local ): Usage Minimum, data= [ 0x90 ] 144
LANG 1 (Hangul/English Toggle, Korea)
Item(Local ): Usage Maximum, data= [ 0x92 ] 146
LANG 3 (Katakana, Japan)
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 133
Report Descriptor: (length is 133)
Item(Global): Usage Page, data= [ 0x01 ] 1
Generic Desktop Controls
Item(Local ): Usage, data= [ 0x02 ] 2
Mouse
Item(Main ): Collection, data= [ 0x01 ] 1
Application
Item(Global): Report ID, data= [ 0x02 ] 2
Item(Local ): Usage, data= [ 0x01 ] 1
Pointer
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Global): Report Size, data= [ 0x01 ] 1
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0x01 ] 1
Item(Global): Usage Page, data= [ 0x09 ] 9
Buttons
Item(Local ): Usage Minimum, data= [ 0x01 ] 1
Button 1 (Primary)
Item(Local ): Usage Maximum, data= [ 0x10 ] 16
(null)
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report Count, data= [ 0x02 ] 2
Item(Global): Report Size, data= [ 0x10 ] 16
Item(Global): Logical Minimum, data= [ 0x01 0x80 ] 32769
Item(Global): Logical Maximum, data= [ 0xff 0x7f ] 32767
Item(Global): Usage Page, data= [ 0x01 ] 1
Generic Desktop Controls
Item(Local ): Usage, data= [ 0x30 ] 48
Direction-X
Item(Local ): Usage, data= [ 0x31 ] 49
Direction-Y
Item(Main ): Input, data= [ 0x06 ] 6
Data Variable Relative No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Logical Minimum, data= [ 0x81 ] 129
Item(Global): Logical Maximum, data= [ 0x7f ] 127
Item(Local ): Usage, data= [ 0x38 ] 56
Wheel
Item(Main ): Input, data= [ 0x06 ] 6
Data Variable Relative No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Global): Usage Page, data= [ 0x0c ] 12
Consumer
Item(Local ): Usage, data= [ 0x38 0x02 ] 568
AC Pan
Item(Main ): Input, data= [ 0x06 ] 6
Data Variable Relative No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): End Collection, data=none
Item(Global): Usage Page, data= [ 0x0c ] 12
Consumer
Item(Local ): Usage, data= [ 0x01 ] 1
Consumer Control
Item(Main ): Collection, data= [ 0x01 ] 1
Application
Item(Global): Report ID, data= [ 0x03 ] 3
Item(Global): Report Count, data= [ 0x02 ] 2
Item(Global): Report Size, data= [ 0x10 ] 16
Item(Global): Logical Minimum, data= [ 0x01 ] 1
Item(Global): Logical Maximum, data= [ 0xff 0x02 ] 767
Item(Local ): Usage Minimum, data= [ 0x01 ] 1
Consumer Control
Item(Local ): Usage Maximum, data= [ 0xff 0x02 ] 767
(null)
Item(Main ): Input, data= [ 0x00 ] 0
Data Array Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Global): Usage Page, data= [ 0x01 ] 1
Generic Desktop Controls
Item(Local ): Usage, data= [ 0x80 ] 128
System Control
Item(Main ): Collection, data= [ 0x01 ] 1
Application
Item(Global): Report ID, data= [ 0x04 ] 4
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Global): Report Size, data= [ 0x02 ] 2
Item(Global): Logical Minimum, data= [ 0x01 ] 1
Item(Global): Logical Maximum, data= [ 0x03 ] 3
Item(Local ): Usage, data= [ 0x82 ] 130
System Sleep
Item(Local ): Usage, data= [ 0x81 ] 129
System Power Down
Item(Local ): Usage, data= [ 0x83 ] 131
System Wake Up
Item(Main ): Input, data= [ 0x00 ] 0
Data Array Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report Size, data= [ 0x01 ] 1
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0x01 ] 1
Item(Local ): Usage, data= [ 0x9b ] 155
(null)
Item(Main ): Input, data= [ 0x06 ] 6
Data Variable Relative No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report Size, data= [ 0x05 ] 5
Item(Main ): Input, data= [ 0x03 ] 3
Constant Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 0
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 54
Report Descriptor: (length is 54)
Item(Global): Usage Page, data= [ 0x00 0xff ] 65280
(null)
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Main ): Collection, data= [ 0x01 ] 1
Application
Item(Global): Report ID, data= [ 0x10 ] 16
Item(Global): Report Count, data= [ 0x06 ] 6
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Main ): Input, data= [ 0x00 ] 0
Data Array Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Main ): Output, data= [ 0x00 ] 0
Data Array Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Global): Usage Page, data= [ 0x00 0xff ] 65280
(null)
Item(Local ): Usage, data= [ 0x02 ] 2
(null)
Item(Main ): Collection, data= [ 0x01 ] 1
Application
Item(Global): Report ID, data= [ 0x11 ] 17
Item(Global): Report Count, data= [ 0x13 ] 19
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Local ): Usage, data= [ 0x02 ] 2
(null)
Item(Main ): Input, data= [ 0x00 ] 0
Data Array Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x02 ] 2
(null)
Item(Main ): Output, data= [ 0x00 ] 0
Data Array Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)Offline
#2 2024-05-05 14:49:49
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 22,152
Re: Logitech Lift USB Mouse Recognized but not Working
Searching for that VID:PID suggests it should be very much working.
Do you see anything in dmesg regarding the logitech driver/usbhid? What output do you get from
sudo libinput list-devicesand do you get mouse events in
sudo libinput debug-eventsdid you potentially update the kernel before plugging the mouse and haven't rebooted yet?
uname -a
pacman -Q linuxAlso how sure are you your actual mouse is not out of juice, since this appears to be just the wireless receiver.
Last edited by V1del (2024-05-05 14:58:21)
Offline
#3 2024-05-05 15:07:32
- hoover1143
- Member
- Registered: 2024-05-05
- Posts: 3
Re: Logitech Lift USB Mouse Recognized but not Working
In dmesg I see the following:
Nothing relating to drivers or usbhid.
[559167.298874] systemd[1]: systemd 255.5-4-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[559167.299023] systemd[1]: Detected architecture x86-64.
[559167.883032] systemd[1]: bpf-lsm: LSM BPF program attached
[559167.904451] systemd-fstab-generator[135782]: Mount point is not a valid path, ignoring.
[559167.904669] systemd-fstab-generator[135782]: Mount point is not a valid path, ignoring.
[559168.348079] systemd-fstab-generator[135943]: Mount point is not a valid path, ignoring.
[559168.348267] systemd-fstab-generator[135943]: Mount point is not a valid path, ignoring.
[559360.132755] usb 3-2: USB disconnect, device number 10
[559366.977854] usb 3-2: new full-speed USB device number 11 using xhci_hcd
[559367.129976] usb 3-2: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01
[559367.130000] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[559367.130004] usb 3-2: Product: USB Receiver
[559367.130007] usb 3-2: Manufacturer: Logitech
[560122.118539] usb 3-2: USB disconnect, device number 11
[560124.981963] usb 3-2: new full-speed USB device number 12 using xhci_hcd
[560125.130948] usb 3-2: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01
[560125.130971] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[560125.130974] usb 3-2: Product: USB Receiver
[560125.130977] usb 3-2: Manufacturer: Logitech
[560151.293675] usb 3-2: USB disconnect, device number 12
[560175.904651] usb 3-2: new full-speed USB device number 13 using xhci_hcd
[560176.056091] usb 3-2: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01
[560176.056112] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[560176.056117] usb 3-2: Product: USB Receiver
[560176.056122] usb 3-2: Manufacturer: Logitech
[564152.175261] usb 3-2: USB disconnect, device number 13
[564157.459946] usb 3-2: new full-speed USB device number 14 using xhci_hcd
[564157.614285] usb 3-2: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01
[564157.614298] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[564157.614301] usb 3-2: Product: USB Receiver
[564157.614304] usb 3-2: Manufacturer: Logitech------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
For list-devices output, I don't see anything related to the USB device.
List-devices output:
Device: Power Button
Kernel: /dev/input/event2
Group: 1
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Disable-w-trackpointing: n/a
Accel profiles: n/a
Rotation: 0.0
Device: Video Bus
Kernel: /dev/input/event11
Group: 2
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Disable-w-trackpointing: n/a
Accel profiles: n/a
Rotation: 0.0
Device: Lid Switch
Kernel: /dev/input/event0
Group: 3
Seat: seat0, default
Capabilities: switch
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Disable-w-trackpointing: n/a
Accel profiles: n/a
Rotation: 0.0
Device: Power Button
Kernel: /dev/input/event1
Group: 4
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Disable-w-trackpointing: n/a
Accel profiles: n/a
Rotation: 0.0
Device: ASUE140D:00 04F3:31B9 Mouse
Kernel: /dev/input/event8
Group: 5
Seat: seat0, default
Capabilities: pointer
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: disabled
Nat.scrolling: disabled
Middle emulation: n/a
Calibration: n/a
Scroll methods: *button
Click methods: none
Disable-w-typing: n/a
Disable-w-trackpointing: n/a
Accel profiles: flat *adaptive custom
Rotation: n/a
Device: ASUE140D:00 04F3:31B9 Touchpad
Kernel: /dev/input/event9
Group: 5
Seat: seat0, default
Size: 125x72mm
Capabilities: pointer gesture
Tap-to-click: disabled
Tap-and-drag: enabled
Tap drag lock: disabled
Left-handed: disabled
Nat.scrolling: disabled
Middle emulation: disabled
Calibration: n/a
Scroll methods: *two-finger edge
Click methods: *button-areas clickfinger
Disable-w-typing: enabled
Disable-w-trackpointing: enabled
Accel profiles: flat *adaptive custom
Rotation: n/a
Device: ASUE140D:00 04F3:31B9 Keyboard
Kernel: /dev/input/event10
Group: 5
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Disable-w-trackpointing: n/a
Accel profiles: n/a
Rotation: 0.0
Device: Intel HID events
Kernel: /dev/input/event4
Group: 6
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Disable-w-trackpointing: n/a
Accel profiles: n/a
Rotation: 0.0
Device: Intel HID 5 button array
Kernel: /dev/input/event5
Group: 7
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Disable-w-trackpointing: n/a
Accel profiles: n/a
Rotation: 0.0
Device: Asus WMI hotkeys
Kernel: /dev/input/event7
Group: 8
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Disable-w-trackpointing: n/a
Accel profiles: n/a
Rotation: 0.0
Device: AT Translated Set 2 keyboard
Kernel: /dev/input/event3
Group: 9
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Disable-w-trackpointing: n/a
Accel profiles: n/a
Rotation: 0.0Debug events is not picking up events from the mouse. I just used the mouse in my other computer and it works fine, so the juice is good. I actually did not try rebooting yet, so I can give that a whirl. Thanks so far!
Offline
#4 2024-05-05 15:12:37
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 22,152
Re: Logitech Lift USB Mouse Recognized but not Working
systemd-fstab-generator[135943]: Mount point is not a valid path, ignoring.is concerning, what does your fstab look like? and the output of the other two commands?
Offline
#5 2024-05-05 15:34:24
- hoover1143
- Member
- Registered: 2024-05-05
- Posts: 3
Re: Logitech Lift USB Mouse Recognized but not Working
It looks like after a reboot + disconnecting and reconnecting the USB device did the trick. I apologize for not trying this ahead of time.
When you mentioned "did you potentially update the kernel before plugging the mouse and haven't rebooted yet?", does this mean a new USB device will usually require a reboot?
Offline
#6 2024-05-05 20:19:40
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 22,152
Re: Logitech Lift USB Mouse Recognized but not Working
If you've updated the kernel in between. What happens on kernel update is that the old kernel modules are replaced with the modules for the newer kernel. If you now plug in a new device, whose driver module is not already loaded anyway the old kernel (which you're currently running on) can't find the module it wants to load because it doesn't exist anymore.
If you want to mitigate this, either load modules you always want loaded ahead of time by listing them in /etc/modules-load.d, reboot more habitually after having had an update including the kernel, or setup something like https://archlinux.org/packages/extra/an … ules-hook/ which will retain your running kernels modules until reboot and clean up afterwards if you enable the corresponding service file.
If this is [SOLVED] please mark it as such by editing the title in your first post.
Offline