You are not logged in.

#1 2024-05-17 02:06:53

czarcastic_comment
Member
Registered: 2024-05-17
Posts: 7

[Solved] xorgxrdp server with xfce - X server could not be started

I'm trying to do something convoluted, I'm not sure which bits are relevant, so here's a bit of an info dump to get started:

I'm trying to create a remote desktop connecting to xrdp using xorgxrdp for the backend via Microsoft Remote Desktop Connection. I'm trying to use xfce as the desktop environment, but I'm not tied to this - I just figured it'd be a good lightweight environment to figure out a proof of concept.
I'm using xorgxrdp-nvidia since I have a NVIDIA gpu, I think this is the issue, but I think I want the hardware acceleration, more on this later.

0. I'm using an ssh tunnel to connect to he server, seems to be working find, I don't think it's relevant.
1. I'm able to connect to the xrdp server on the client, I can get to the login screen and select between xorg, xvnc, etc. I also see the connection reflected in journalctl on the server.
2. I'm able to run xfce on the server (it's also a desktop) and it works normally.
3. I am not able to connect to the xorg server from the client.
    - The xrdp GUI shows the error "X server could not be started"
    - journalctl shows an error "SSL_read ... error:0A000126:SSL... unexpected eof while reading ... xrdp_sec_incoming: xrdp_mcs_incoming failed"
    - the .xorgrdp.10.log has the error message "systemd-logind: failed to take device /dev/dri/card1: operation not permitted
Those are the most relevant errors I could pick out, but full logs are below.

A simple google search brings up similar results for posts https://bbs.archlinux.org/viewtopic.php?id=249230 andhttps://bbs.archlinux.org/viewtopic.php?id=264539, but I don't think they're related - at least from what I can tell.

I think this is either an xorg server config issue in which case I ask: How can I set different configs for the same user if I'm using different machines? How do I know how to configure the xorg.conf file for the remote desktop given I can't connect to it - I had to edit the server desktop's xorg.conf anyway since it detected a second monitor that I don't have anyway.

Otherwise it might be some kind of issue with my NVIDIA drivers and xorgxrdp-nvidia??? I don't know how I would tell.

I've been banging my head against this one for a few days, any help would be much appreciated.

CONFIGS:
xorg.conf

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/OTF"
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/100dpi"
	FontPath     "/usr/share/fonts/75dpi"
EndSection

Section "Module"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "nvidia"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "kmsdev"             	# <str>
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "PageFlip"           	# [<bool>]
        #Option     "ZaphodHeads"        	# <str>
        #Option     "DoubleShadow"       	# [<bool>]
        #Option     "Atomic"             	# [<bool>]
        #Option     "VariableRefresh"    	# [<bool>]
        #Option     "UseGammaLUT"        	# [<bool>]
        #Option     "AsyncFlipSecondaries" 	# [<bool>]
	Identifier  "Card1"
	Driver      "modesetting"
	BusID       "PCI:0:2:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card1"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

xrdp.ini

[Globals]
; xrdp.ini file version number
ini_version=1

; fork a new process for each incoming connection
fork=true

; ports to listen on, number alone means listen on all interfaces
; 0.0.0.0 or :: if ipv6 is configured
; space between multiple occurrences
; ALL specified interfaces must be UP when xrdp starts, otherwise xrdp will fail to start
;
; Examples:
;   port=3389
;   port=unix://./tmp/xrdp.socket
;   port=tcp://.:3389                           127.0.0.1:3389
;   port=tcp://:3389                            *:3389
;   port=tcp://<any ipv4 format addr>:3389      192.168.1.1:3389
;   port=tcp6://.:3389                          ::1:3389
;   port=tcp6://:3389                           *:3389
;   port=tcp6://{<any ipv6 format addr>}:3389   {FC00:0:0:0:0:0:0:1}:3389
;   port=vsock://<cid>:<port>
port=3389

; 'port' above should be connected to with vsock instead of tcp
; use this only with number alone in port above
; prefer use vsock://<cid>:<port> above
use_vsock=false

; regulate if the listening socket use socket option tcp_nodelay
; no buffering will be performed in the TCP stack
tcp_nodelay=true

; regulate if the listening socket use socket option keepalive
; if the network connection disappear without close messages the connection will be closed
tcp_keepalive=true

; set tcp send/recv buffer
; These parameters are largely historic. On systems with dynamic TCP
; buffer sizes, setting them manually will either impact performance or
; waste memory
#tcp_send_buffer_bytes=32768
#tcp_recv_buffer_bytes=32768

; security layer can be 'tls', 'rdp' or 'negotiate'
; for client compatible layer
security_layer=negotiate

; minimum security level allowed for client for classic RDP encryption
; use tls_ciphers to configure TLS encryption
; can be 'none', 'low', 'medium', 'high', 'fips'
crypt_level=high

; X.509 certificate and private key
; openssl req -x509 -newkey rsa:2048 -nodes -keyout key.pem -out cert.pem -days 365
certificate=
key_file=

; set SSL protocols
; can be comma separated list of 'SSLv3', 'TLSv1', 'TLSv1.1', 'TLSv1.2', 'TLSv1.3'
ssl_protocols=TLSv1.2, TLSv1.3
; set TLS cipher suites
#tls_ciphers=HIGH

; concats the domain name to the user if set for authentication with the separator
; for example when the server is multi homed with SSSd
#domain_user_separator=@

; The following options will override the keyboard layout settings.
; These options are for DEBUG and are not recommended for regular use.
#xrdp.override_keyboard_type=0x04
#xrdp.override_keyboard_subtype=0x01
#xrdp.override_keylayout=0x00000409

; Section name to use for automatic login if the client sends username
; and password. If empty, the domain name sent by the client is used.
; If empty and no domain name is given, the first suitable section in
; this file will be used.
autorun=

allow_channels=true
allow_multimon=true
bitmap_cache=true
bitmap_compression=true
bulk_compression=true
#hidelogwindow=true
max_bpp=32
new_cursors=true
; fastpath - can be 'input', 'output', 'both', 'none'
use_fastpath=both
; when true, userid/password *must* be passed on cmd line
#require_credentials=true
; when true, the userid will be used to try to authenticate
#enable_token_login=true
; You can set the PAM error text in a gateway setup (MAX 256 chars)
#pamerrortxt=change your password according to policy at http://url

;
; colors used by windows in RGB format
;
#black=000000
grey=e1e1e1
dark_grey=b4b4b4
blue=0078d7
dark_blue=0078d7
#white=ffffff
#red=ff0000
#green=00ff00
#background=626c72

;
; Select a default fv1 font
;
; This parameter is a comma-separated list of DPI:name pairs.
; The list is scanned from left-to-right. The font used is the first
; font whose DPI value is less-than-or-equal to the vertical DPI of
; the monitor used for the login screen.
#fv1_select=130:sans-18.fv1,0:sans-10.fv1
; Default DPI used for a monitor when that information is unknown
#default_dpi=96

;
; configure login screen
;

; Login Screen Window Title
#ls_title=My Login Title

; top level window background color in RGB format
ls_top_window_bg_color=003057

; width and height of login screen
;
; When the sans-10.fv1 font is selected, these values are in pixels.
; For other fonts, these values (and other size values) will be scaled
; appropriately to preserve the proportions of the login screen.
;
; The default height allows for about 5 fields to be comfortably displayed
; above the buttons at the bottom. To display more fields, make <ls_height>
; larger, and also increase <ls_btn_ok_y_pos> and <ls_btn_cancel_y_pos>
; below
;
ls_width=350
ls_height=360

; login screen background color in RGB format
ls_bg_color=f0f0f0

; optional background image filename. BMP format is always supported,
; but other formats will be supported if xrdp is build with imlib2
; The transform can be one of the following:-
;     none  : No transformation. Image is placed in bottom-right corner
;             of the screen.
;     scale : Image is scaled to the screen size. The image aspect
;             ratio is not preserved.
;     zoom  : Image is scaled to the screen size. The image aspect
;             ratio is preserved by clipping the image.
#ls_background_image=
#ls_background_transform=none

; logo
; full path to file or file in shared folder. BMP format is always supported,
; but other formats will be supported if xrdp is build with imlib2
; For transform values, see 'ls_background_transform'. The logo width and
; logo height are ignored for a transform of 'none'.
ls_logo_filename=
ls_logo_transform=scale
ls_logo_width=250
ls_logo_height=110
ls_logo_x_pos=55
ls_logo_y_pos=35

; for positioning labels such as username, password etc
ls_label_x_pos=30
ls_label_width=68

; for positioning text and combo boxes next to above labels
ls_input_x_pos=110
ls_input_width=210

; y pos for first label and combo box
ls_input_y_pos=158

; OK button
ls_btn_ok_x_pos=142
ls_btn_ok_y_pos=308
ls_btn_ok_width=85
ls_btn_ok_height=30

; Cancel button
ls_btn_cancel_x_pos=237
ls_btn_cancel_y_pos=308
ls_btn_cancel_width=85
ls_btn_cancel_height=30

[Logging]
; Note: Log levels can be any of: core, error, warning, info, debug, or trace
LogFile=xrdp.log
LogLevel=INFO
EnableSyslog=true
#SyslogLevel=INFO
#EnableConsole=false
#ConsoleLevel=INFO
#EnableProcessId=false

[LoggingPerLogger]
; Note: per logger configuration is only used if xrdp is built with
; --enable-devel-logging
#xrdp.c=INFO
#main()=INFO

[Channels]
; Channel names not listed here will be blocked by XRDP.
; You can block any channel by setting its value to false.
; IMPORTANT! All channels are not supported in all use
; cases even if you set all values to true.
; You can override these settings on each session type
; These settings are only used if allow_channels=true
rdpdr=true
rdpsnd=true
drdynvc=true
cliprdr=true
rail=true
xrdpvr=true

; for debugging xrdp, in section xrdp1, change port=-1 to this:
#port=/tmp/.xrdp/xrdp_display_10


;
; Session types
;

; Some session types such as Xorg and Xvnc start a display server.
; Startup command-line parameters for the display server are configured
; in sesman.ini. See and configure also sesman.ini.
[Xorg]
name=Xorg
lib=libxup.so
username=ask
password=ask
port=-1
code=20

[Xvnc]
name=Xvnc
lib=libvnc.so
username=ask
password=ask
ip=127.0.0.1
port=-1
#xserverbpp=24
#delay_ms=2000
; Disable requested encodings to support buggy VNC servers
; (1 = ExtendedDesktopSize)
#disabled_encodings_mask=0
; Use this to connect to a chansrv instance created outside of sesman
; (e.g. as part of an x11vnc console session). Replace '0' with the
; display number of the session
#chansrvport=DISPLAY(0)

; Generic VNC Proxy
; Tailor this to specific hosts and VNC instances by specifying an ip
; and port and setting a suitable name.
[vnc-any]
name=vnc-any
lib=libvnc.so
ip=ask
port=ask5900
username=na
password=ask
#pamusername=asksame
#pampassword=asksame
#delay_ms=2000

; Generic RDP proxy using NeutrinoRDP
; Tailor this to specific hosts by specifying an ip and port and setting
; a suitable name.
[neutrinordp-any]
name=neutrinordp-any
; To use this section, you should build xrdp with configure option
; --enable-neutrinordp.
lib=libxrdpneutrinordp.so
ip=ask
port=ask3389
username=ask
password=ask
; Uncomment the following lines to enable PAM authentication for proxy
; connections.
#pamusername=ask
#pampassword=ask
; Currently NeutrinoRDP doesn't support dynamic resizing. Uncomment
; this line if you're using a client which does.
#enable_dynamic_resizing=false
; By default, performance settings requested by the RDP client are ignored
; and chosen by NeutrinoRDP. Uncomment this line to allow the user to
; select performance settings in the RDP client.
#perf.allow_client_experiencesettings=true
; Override any experience setting by uncommenting one or more of the
; following lines.
#perf.wallpaper=false
#perf.font_smoothing=false
#perf.desktop_composition=false
#perf.full_window_drag=false
#perf.menu_anims=false
#perf.themes=false
#perf.cursor_blink=false
; By default NeutrinoRDP supports cursor shadows. If this is giving
; you problems (e.g. cursor is a black rectangle) try disabling cursor
; shadows by uncommenting the following line.
#perf.cursor_shadow=false
; By default, NeutrinoRDP uses the keyboard layout of the remote RDP Server.
; If you want to tell the remote the keyboard layout of the RDP Client,
; by uncommenting the following line.
#neutrinordp.allow_client_keyboardLayout=true
; The following options will override the remote keyboard layout settings.
; These options are for DEBUG and are not recommended for regular use.
#neutrinordp.override_keyboardLayout_mask=0x0000FFFF
#neutrinordp.override_kbd_type=0x04
#neutrinordp.override_kbd_subtype=0x01
#neutrinordp.override_kbd_fn_keys=12
#neutrinordp.override_kbd_layout=0x00000409

; You can override the common channel settings for each session type
#channel.rdpdr=true
#channel.rdpsnd=true
#channel.drdynvc=true
#channel.cliprdr=true
#channel.rail=true
#channel.xrdpvr=true

sesman.ini

;; See `man 5 sesman.ini` for details

[Globals]
; listening port
#ListenPort=sesman.socket
EnableUserWindowManager=true
; Give in relative path to user's home directory
UserWindowManager=startwm.sh
; Give in full path or relative path to /etc/xrdp
DefaultWindowManager=startwm.sh
; Give in full path or relative path to /etc/xrdp
ReconnectScript=reconnectwm.sh

[Security]
AllowRootLogin=true
MaxLoginRetry=4
TerminalServerUsers=tsusers
TerminalServerAdmins=tsadmins
; When AlwaysGroupCheck=false access will be permitted
; if the group TerminalServerUsers is not defined.
AlwaysGroupCheck=false
; When RestrictOutboundClipboard=all clipboard from the
; server is not pushed to the client.
; In addition, you can control text/file/image transfer restrictions
; respectively. It also accepts comma separated list such as text,file,image.
; To keep compatibility, some aliases are also available:
;   true: an alias of all
;   false: an alias of none
;   yes: an alias of all
RestrictOutboundClipboard=none
; When RestrictInboundClipboard=all clipboard from the
; client is not pushed to the server.
; In addition, you can control text/file/image transfer restrictions
; respectively. It also accepts comma separated list such as text,file,image.
; To keep compatibility, some aliases are also available:
;   true: an alias of all
;   false: an alias of none
;   yes: an alias of all
RestrictInboundClipboard=none
; Set to 'no' to prevent users from logging in with alternate shells
#AllowAlternateShell=true
; On Linux systems, the Xorg X11 server is normally invoked using
; no_new_privs to avoid problems if the executable is suid. This may,
; however, interfere with the use of security modules such as AppArmor.
; Leave this unset unless you need to disable it.
#XorgNoNewPrivileges=true
; Specify the group which is to have read access to the directory where
; local sockets for the session are created. This is normally the GID
; which the xrdp process runs as.
; Default is 'root'
#SessionSockdirGroup=root


[Sessions]
;; X11DisplayOffset - x11 display number offset
; Type: integer
; Default: 10
X11DisplayOffset=10

;; MaxSessions - maximum number of connections to an xrdp server
; Type: integer
; Default: 0
MaxSessions=50

;; MaxDisplayNumer - maximum number considered for an X display
; Type: integer
; Default: 63
;
; IANA only allocates TCP ports up to 6063 for X servers. If you are not
; allowing TCP connections to your X servers you may safely increase this
; number.
#MaxDisplayNumber=63

;; KillDisconnected - kill disconnected sessions
; Type: boolean
; Default: false
; if 1, true, or yes, every session will be killed within DisconnectedTimeLimit
; seconds after the user disconnects
KillDisconnected=false

;; DisconnectedTimeLimit (seconds) - wait before kill disconnected sessions
; Type: integer
; Default: 0
; if KillDisconnected is set to false, this value is ignored
DisconnectedTimeLimit=0

;; IdleTimeLimit (seconds) - wait before disconnect idle sessions
; Type: integer
; Default: 0
; Set to 0 to disable idle disconnection.
IdleTimeLimit=0

;; Policy - session allocation policy
;
;  Type: enum [ "Default" | "Separate" | Combination from {UBDI} ]
;  "Default"    Currently same as "UB"
;  "Separate"   All sessions are separate. Sessions can never be rejoined,
;               and will need to be cleaned up manually, or automatically
;               by setting other sesman options.
;
;   Combination options:-
;      U        Sessions are separated per user
;      B        Sessions are separated by bits-per-pixel
;      D        Sessions are separated by initial display size
;      I        Sessions are separated by IP address
;
;   The options U and B are always active, and cannot be de-selected.
Policy=Default

[Logging]
; Note: Log levels can be any of: core, error, warning, info, debug, or trace
LogFile=xrdp-sesman.log
LogLevel=INFO
EnableSyslog=true
#SyslogLevel=INFO
#EnableConsole=false
#ConsoleLevel=INFO
#EnableProcessId=false

[LoggingPerLogger]
; Note: per logger configuration is only used if xrdp is built with
; --enable-devel-logging
#sesman.c=INFO
#main()=INFO

;
; Session definitions - startup command-line parameters for each session type
;

[Sessions]
KillDisconnected=true
DisconnectedTimeLimit=60

[Xorg]
; Specify the path of non-suid Xorg executable. It might differ depending
; on your distribution and version. Find out the appropriate path for your
; environment. The typical path is known as follows:
;
; Fedora 26 or later    :  param=/usr/libexec/Xorg
; Debian 9 or later     :  param=/usr/lib/xorg/Xorg
; Ubuntu 16.04 or later :  param=/usr/lib/xorg/Xorg
; Arch Linux            :  param=/usr/lib/Xorg
; CentOS 7              :  param=/usr/bin/Xorg or param=/usr/lib/Xorg
; CentOS 8              :  param=/usr/libexec/Xorg
; FreeBSD (from 2022Q4) :  param=/usr/local/libexec/Xorg
;
param=/usr/lib/Xorg
; Leave the rest parameters as-is unless you understand what will happen.
param=-config
param=xrdp/xorg_nvidia.conf
param=-noreset
param=-nolisten
param=tcp
param=-logfile
param=.xorgxrdp.%s.log

[Xvnc]
param=Xvnc
param=-bs
param=-nolisten
param=tcp
param=-localhost
param=-dpi
param=96

[Chansrv]
; drive redirection
; See sesman.ini(5) for the format of this parameter
#FuseMountName=/run/user/%u/thinclient_drives
#FuseMountName=/media/thinclient_drives/%U/thinclient_drives
FuseMountName=thinclient_drives
; this value allows only the user to access their own mapped drives.
; Make this more permissive (e.g. 022) if required.
FileUmask=077
; Can be used to disable FUSE functionality - see sesman.ini(5)
#EnableFuseMount=false
; Uncomment this line only if you are using GNOME 3 versions 3.29.92
; and up, and you wish to cut-paste files between Nautilus and Windows. Do
; not use this setting for GNOME 4, or other file managers
#UseNautilus3FlistFormat=true
; sound redirection
; workaround for Microsoft mstsc.exe to suppress noise.
; SoundNumSilentFramesAAC | SoundNumSilentFramesMP3 silent frames are sent before SNDC_CLOSE is sent.
; during SoundMsecDoNotSend mS after SNDC_CLOSE is sent, sound data is not send.
; depending on the environment, it might be necessary to increase values.
; Defaults: SoundNumSilentFramesAAC=4, SoundNumSilentFramesMP3=2, SoundMsecDoNotSend=1000
; If set to 0, this workaround is not applied.
#SoundNumSilentFramesAAC=4
#SoundNumSilentFramesMP3=2
#SoundMsecDoNotSend=1000

[ChansrvLogging]
; Note: one log file is created per display and the LogFile config value
; is ignored. The channel server log file names follow the naming convention:
; xrdp-chansrv.${DISPLAY}.log
;
; Note: Log levels can be any of: core, error, warning, info, debug, or trace
LogLevel=INFO
EnableSyslog=true
#SyslogLevel=INFO
#EnableConsole=false
#ConsoleLevel=INFO
#EnableProcessId=false

[ChansrvLoggingPerLogger]
; Note: per logger configuration is only used if xrdp is built with
; --enable-devel-logging
#chansrv.c=INFO
#main()=INFO

[SessionVariables]
PULSE_SCRIPT=/etc/xrdp/pulse/default.pa

LOGS:
journalctl:

May 16 21:41:38 hermes kernel: Linux version 6.8.9-arch1-2 (linux@archlinux) (gcc (GCC) 14.1.1 20240507, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Tue, 07 May 2024 21:35:54 +0000
May 16 21:41:38 hermes kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a88ffea0-6e6c-4138-82c1-e1575b189989 rw loglevel=3 quiet
May 16 21:41:38 hermes kernel: BIOS-provided physical RAM map:
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000001011fff] usable
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x000000000101b000-0x000000002bfb3fff] usable
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x000000002bfb4000-0x000000002cacdfff] reserved
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x000000002cace000-0x000000002cb4afff] ACPI data
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x000000002cb4b000-0x000000002d044fff] ACPI NVS
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x000000002d045000-0x000000002dc15fff] reserved
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x000000002dc16000-0x000000002dc16fff] usable
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x000000002dc20000-0x000000003fffffff] usable
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x0000000040400000-0x0000000048bc2fff] usable
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x0000000048bcc000-0x0000000065536fff] usable
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x0000000065537000-0x0000000065537fff] ACPI NVS
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x0000000065538000-0x0000000065538fff] reserved
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x0000000065539000-0x0000000068552fff] usable
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x000000006855c000-0x000000007acfffff] usable
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x000000007ad00000-0x000000007f7fffff] reserved
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
May 16 21:41:38 hermes kernel: BIOS-e820: [mem 0x0000000100000000-0x000000087c7fffff] usable
May 16 21:41:38 hermes kernel: NX (Execute Disable) protection: active
May 16 21:41:38 hermes kernel: APIC: Static calls initialized
May 16 21:41:38 hermes kernel: e820: update [mem 0x0725d018-0x07266a57] usable ==> usable
May 16 21:41:38 hermes kernel: e820: update [mem 0x0725d018-0x07266a57] usable ==> usable
May 16 21:41:38 hermes kernel: extended physical RAM map:
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x0000000000100000-0x0000000001011fff] usable
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x000000000101b000-0x000000000725d017] usable
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x000000000725d018-0x0000000007266a57] usable
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x0000000007266a58-0x000000002bfb3fff] usable
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x000000002bfb4000-0x000000002cacdfff] reserved
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x000000002cace000-0x000000002cb4afff] ACPI data
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x000000002cb4b000-0x000000002d044fff] ACPI NVS
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x000000002d045000-0x000000002dc15fff] reserved
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x000000002dc16000-0x000000002dc16fff] usable
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x000000002dc20000-0x000000003fffffff] usable
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x0000000040400000-0x0000000048bc2fff] usable
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x0000000048bcc000-0x0000000065536fff] usable
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x0000000065537000-0x0000000065537fff] ACPI NVS
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x0000000065538000-0x0000000065538fff] reserved
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x0000000065539000-0x0000000068552fff] usable
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x000000006855c000-0x000000007acfffff] usable
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x000000007ad00000-0x000000007f7fffff] reserved
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
May 16 21:41:38 hermes kernel: reserve setup_data: [mem 0x0000000100000000-0x000000087c7fffff] usable
May 16 21:41:38 hermes kernel: efi: EFI v2.7 by American Megatrends
May 16 21:41:38 hermes kernel: efi: ACPI 2.0=0x2cae7000 ACPI=0x2cae7000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x2cf85000 ESRT=0x2d751498 MEMATTR=0x29f97018 INITRD=0x1855e718 RNG=0x2cae6018 TPMEventLog=0x7267018 
May 16 21:41:38 hermes kernel: random: crng init done
May 16 21:41:38 hermes kernel: efi: Remove mem63: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
May 16 21:41:38 hermes kernel: e820: remove [mem 0xf0000000-0xf7ffffff] reserved
May 16 21:41:38 hermes kernel: efi: Not removing mem64: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
May 16 21:41:38 hermes kernel: efi: Not removing mem65: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
May 16 21:41:38 hermes kernel: efi: Not removing mem66: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
May 16 21:41:38 hermes kernel: efi: Remove mem67: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
May 16 21:41:38 hermes kernel: e820: remove [mem 0xff000000-0xffffffff] reserved
May 16 21:41:38 hermes kernel: SMBIOS 3.1.1 present.
May 16 21:41:38 hermes kernel: DMI: Dell Inc. Precision 3630 Tower/0NNNCT, BIOS 2.27.0 02/29/2024
May 16 21:41:38 hermes kernel: tsc: Detected 3800.000 MHz processor
May 16 21:41:38 hermes kernel: tsc: Detected 3799.900 MHz TSC
May 16 21:41:38 hermes kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
May 16 21:41:38 hermes kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
May 16 21:41:38 hermes kernel: last_pfn = 0x87c800 max_arch_pfn = 0x400000000
May 16 21:41:38 hermes kernel: MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs
May 16 21:41:38 hermes kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
May 16 21:41:38 hermes kernel: last_pfn = 0x7ad00 max_arch_pfn = 0x400000000
May 16 21:41:38 hermes kernel: esrt: Reserving ESRT space from 0x000000002d751498 to 0x000000002d7514d0.
May 16 21:41:38 hermes kernel: Using GB pages for direct mapping
May 16 21:41:38 hermes kernel: Secure boot enabled
May 16 21:41:38 hermes kernel: RAMDISK: [mem 0x0726f000-0x0dce0fff]
May 16 21:41:38 hermes kernel: ACPI: Early table checksum verification disabled
May 16 21:41:38 hermes kernel: ACPI: RSDP 0x000000002CAE7000 000024 (v02 DELL  )
May 16 21:41:38 hermes kernel: ACPI: XSDT 0x000000002CAE70C8 00010C (v01 DELL   CBX3     01072009 AMI  00010013)
May 16 21:41:38 hermes kernel: ACPI: FACP 0x000000002CB29F88 000114 (v06 DELL   CBX3     01072009 AMI  00010013)
May 16 21:41:38 hermes kernel: ACPI: DSDT 0x000000002CAE7260 042D25 (v02 DELL   CBX3     01072009 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: FACS 0x000000002D043F80 000040
May 16 21:41:38 hermes kernel: ACPI: APIC 0x000000002CB2A0A0 0000F4 (v04 DELL   CBX3     01072009 AMI  00010013)
May 16 21:41:38 hermes kernel: ACPI: FPDT 0x000000002CB2A198 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
May 16 21:41:38 hermes kernel: ACPI: FIDT 0x000000002CB2A1E0 00009C (v01 DELL   CBX3     01072009 AMI  00010013)
May 16 21:41:38 hermes kernel: ACPI: MCFG 0x000000002CB2A280 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
May 16 21:41:38 hermes kernel: ACPI: SSDT 0x000000002CB2A2C0 001B26 (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: SSDT 0x000000002CB2BDE8 0033EC (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: SSDT 0x000000002CB2F1D8 002497 (v02 PegSsd PegSsdt  00001000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: HPET 0x000000002CB31670 000038 (v01 DELL\x CBX3     00000002      01000013)
May 16 21:41:38 hermes kernel: ACPI: SSDT 0x000000002CB316A8 000FD3 (v02 DELL\x Ther_Rvp 00001000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: SSDT 0x000000002CB32680 000ADD (v02 INTEL  DELL__TB 00000000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: UEFI 0x000000002CB33160 000042 (v01 DELL\x CBX3     00000002      01000013)
May 16 21:41:38 hermes kernel: ACPI: LPIT 0x000000002CB331A8 000094 (v01 DELL\x CBX3     00000002      01000013)
May 16 21:41:38 hermes kernel: ACPI: SSDT 0x000000002CB33240 0027DE (v02 DELL\x PtidDevc 00001000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: SSDT 0x000000002CB35A20 0014E2 (v02 DELL\x TbtTypeC 00000000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: DBGP 0x000000002CB36F08 000034 (v01 DELL\x CBX3     00000002      01000013)
May 16 21:41:38 hermes kernel: ACPI: DBG2 0x000000002CB36F40 000054 (v00 DELL\x CBX3     00000002      01000013)
May 16 21:41:38 hermes kernel: ACPI: SSDT 0x000000002CB36F98 001B67 (v02 DELL\x UsbCTabl 00001000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: SLIC 0x000000002CB38B00 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
May 16 21:41:38 hermes kernel: ACPI: MSDM 0x000000002CB38C78 000055 (v03 DELL   CBX3     06222004 AMI  00010013)
May 16 21:41:38 hermes kernel: ACPI: DMAR 0x000000002CB38CD0 0000C8 (v01 INTEL  EDK2     00000002      01000013)
May 16 21:41:38 hermes kernel: ACPI: SSDT 0x000000002CB38D98 000144 (v02 Intel  ADebTabl 00001000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: BGRT 0x000000002CB38EE0 000038 (v00                 01072009 AMI  00010013)
May 16 21:41:38 hermes kernel: ACPI: TPM2 0x000000002CB38F18 000034 (v04 DELL\x CBX3     00000001 AMI  00000000)
May 16 21:41:38 hermes kernel: ACPI: ASF! 0x000000002CB38F50 0000A0 (v32 DELL\x CBX3     00000002      01000013)
May 16 21:41:38 hermes kernel: ACPI: EINJ 0x000000002CB38FF0 000130 (v01 AMI    AMI.EINJ 00000000 AMI. 00000000)
May 16 21:41:38 hermes kernel: ACPI: ERST 0x000000002CB39120 000230 (v01 AMIER  AMI.ERST 00000000 AMI. 00000000)
May 16 21:41:38 hermes kernel: ACPI: BERT 0x000000002CB39350 000030 (v01 AMI    AMI.BERT 00000000 AMI. 00000000)
May 16 21:41:38 hermes kernel: ACPI: HEST 0x000000002CB39380 0000A8 (v01 AMI    AMI.HEST 00000000 AMI. 00000000)
May 16 21:41:38 hermes kernel: ACPI: Reserving FACP table memory at [mem 0x2cb29f88-0x2cb2a09b]
May 16 21:41:38 hermes kernel: ACPI: Reserving DSDT table memory at [mem 0x2cae7260-0x2cb29f84]
May 16 21:41:38 hermes kernel: ACPI: Reserving FACS table memory at [mem 0x2d043f80-0x2d043fbf]
May 16 21:41:38 hermes kernel: ACPI: Reserving APIC table memory at [mem 0x2cb2a0a0-0x2cb2a193]
May 16 21:41:38 hermes kernel: ACPI: Reserving FPDT table memory at [mem 0x2cb2a198-0x2cb2a1db]
May 16 21:41:38 hermes kernel: ACPI: Reserving FIDT table memory at [mem 0x2cb2a1e0-0x2cb2a27b]
May 16 21:41:38 hermes kernel: ACPI: Reserving MCFG table memory at [mem 0x2cb2a280-0x2cb2a2bb]
May 16 21:41:38 hermes kernel: ACPI: Reserving SSDT table memory at [mem 0x2cb2a2c0-0x2cb2bde5]
May 16 21:41:38 hermes kernel: ACPI: Reserving SSDT table memory at [mem 0x2cb2bde8-0x2cb2f1d3]
May 16 21:41:38 hermes kernel: ACPI: Reserving SSDT table memory at [mem 0x2cb2f1d8-0x2cb3166e]
May 16 21:41:38 hermes kernel: ACPI: Reserving HPET table memory at [mem 0x2cb31670-0x2cb316a7]
May 16 21:41:38 hermes kernel: ACPI: Reserving SSDT table memory at [mem 0x2cb316a8-0x2cb3267a]
May 16 21:41:38 hermes kernel: ACPI: Reserving SSDT table memory at [mem 0x2cb32680-0x2cb3315c]
May 16 21:41:38 hermes kernel: ACPI: Reserving UEFI table memory at [mem 0x2cb33160-0x2cb331a1]
May 16 21:41:38 hermes kernel: ACPI: Reserving LPIT table memory at [mem 0x2cb331a8-0x2cb3323b]
May 16 21:41:38 hermes kernel: ACPI: Reserving SSDT table memory at [mem 0x2cb33240-0x2cb35a1d]
May 16 21:41:38 hermes kernel: ACPI: Reserving SSDT table memory at [mem 0x2cb35a20-0x2cb36f01]
May 16 21:41:38 hermes kernel: ACPI: Reserving DBGP table memory at [mem 0x2cb36f08-0x2cb36f3b]
May 16 21:41:38 hermes kernel: ACPI: Reserving DBG2 table memory at [mem 0x2cb36f40-0x2cb36f93]
May 16 21:41:38 hermes kernel: ACPI: Reserving SSDT table memory at [mem 0x2cb36f98-0x2cb38afe]
May 16 21:41:38 hermes kernel: ACPI: Reserving SLIC table memory at [mem 0x2cb38b00-0x2cb38c75]
May 16 21:41:38 hermes kernel: ACPI: Reserving MSDM table memory at [mem 0x2cb38c78-0x2cb38ccc]
May 16 21:41:38 hermes kernel: ACPI: Reserving DMAR table memory at [mem 0x2cb38cd0-0x2cb38d97]
May 16 21:41:38 hermes kernel: ACPI: Reserving SSDT table memory at [mem 0x2cb38d98-0x2cb38edb]
May 16 21:41:38 hermes kernel: ACPI: Reserving BGRT table memory at [mem 0x2cb38ee0-0x2cb38f17]
May 16 21:41:38 hermes kernel: ACPI: Reserving TPM2 table memory at [mem 0x2cb38f18-0x2cb38f4b]
May 16 21:41:38 hermes kernel: ACPI: Reserving ASF! table memory at [mem 0x2cb38f50-0x2cb38fef]
May 16 21:41:38 hermes kernel: ACPI: Reserving EINJ table memory at [mem 0x2cb38ff0-0x2cb3911f]
May 16 21:41:38 hermes kernel: ACPI: Reserving ERST table memory at [mem 0x2cb39120-0x2cb3934f]
May 16 21:41:38 hermes kernel: ACPI: Reserving BERT table memory at [mem 0x2cb39350-0x2cb3937f]
May 16 21:41:38 hermes kernel: ACPI: Reserving HEST table memory at [mem 0x2cb39380-0x2cb39427]
May 16 21:41:38 hermes kernel: No NUMA configuration found
May 16 21:41:38 hermes kernel: Faking a node at [mem 0x0000000000000000-0x000000087c7fffff]
May 16 21:41:38 hermes kernel: NODE_DATA(0) allocated [mem 0x87c7fb000-0x87c7fffff]
May 16 21:41:38 hermes kernel: Zone ranges:
May 16 21:41:38 hermes kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
May 16 21:41:38 hermes kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
May 16 21:41:38 hermes kernel:   Normal   [mem 0x0000000100000000-0x000000087c7fffff]
May 16 21:41:38 hermes kernel:   Device   empty
May 16 21:41:38 hermes kernel: Movable zone start for each node
May 16 21:41:38 hermes kernel: Early memory node ranges
May 16 21:41:38 hermes kernel:   node   0: [mem 0x0000000000001000-0x000000000009efff]
May 16 21:41:38 hermes kernel:   node   0: [mem 0x0000000000100000-0x0000000001011fff]
May 16 21:41:38 hermes kernel:   node   0: [mem 0x000000000101b000-0x000000002bfb3fff]
May 16 21:41:38 hermes kernel:   node   0: [mem 0x000000002dc16000-0x000000002dc16fff]
May 16 21:41:38 hermes kernel:   node   0: [mem 0x000000002dc20000-0x000000003fffffff]
May 16 21:41:38 hermes kernel:   node   0: [mem 0x0000000040400000-0x0000000048bc2fff]
May 16 21:41:38 hermes kernel:   node   0: [mem 0x0000000048bcc000-0x0000000065536fff]
May 16 21:41:38 hermes kernel:   node   0: [mem 0x0000000065539000-0x0000000068552fff]
May 16 21:41:38 hermes kernel:   node   0: [mem 0x000000006855c000-0x000000007acfffff]
May 16 21:41:38 hermes kernel:   node   0: [mem 0x0000000100000000-0x000000087c7fffff]
May 16 21:41:38 hermes kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000087c7fffff]
May 16 21:41:38 hermes kernel: On node 0, zone DMA: 1 pages in unavailable ranges
May 16 21:41:38 hermes kernel: On node 0, zone DMA: 97 pages in unavailable ranges
May 16 21:41:38 hermes kernel: On node 0, zone DMA32: 9 pages in unavailable ranges
May 16 21:41:38 hermes kernel: On node 0, zone DMA32: 7266 pages in unavailable ranges
May 16 21:41:38 hermes kernel: On node 0, zone DMA32: 9 pages in unavailable ranges
May 16 21:41:38 hermes kernel: On node 0, zone DMA32: 1024 pages in unavailable ranges
May 16 21:41:38 hermes kernel: On node 0, zone DMA32: 9 pages in unavailable ranges
May 16 21:41:38 hermes kernel: On node 0, zone DMA32: 2 pages in unavailable ranges
May 16 21:41:38 hermes kernel: On node 0, zone DMA32: 9 pages in unavailable ranges
May 16 21:41:38 hermes kernel: On node 0, zone Normal: 21248 pages in unavailable ranges
May 16 21:41:38 hermes kernel: On node 0, zone Normal: 14336 pages in unavailable ranges
May 16 21:41:38 hermes kernel: Reserving Intel graphics memory at [mem 0x7d800000-0x7f7fffff]
May 16 21:41:38 hermes kernel: ACPI: PM-Timer IO Port: 0x1808
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
May 16 21:41:38 hermes kernel: ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
May 16 21:41:38 hermes kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
May 16 21:41:38 hermes kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
May 16 21:41:38 hermes kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
May 16 21:41:38 hermes kernel: ACPI: Using ACPI (MADT) for SMP configuration information
May 16 21:41:38 hermes kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
May 16 21:41:38 hermes kernel: e820: update [mem 0x27923000-0x279a9fff] usable ==> reserved
May 16 21:41:38 hermes kernel: TSC deadline timer available
May 16 21:41:38 hermes kernel: smpboot: Allowing 12 CPUs, 0 hotplug CPUs
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x01012000-0x0101afff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x0725d000-0x0725dfff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x07266000-0x07266fff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x27923000-0x279a9fff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x2bfb4000-0x2cacdfff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x2cace000-0x2cb4afff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x2cb4b000-0x2d044fff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x2d045000-0x2dc15fff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x2dc17000-0x2dc1ffff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x48bc3000-0x48bcbfff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x65537000-0x65537fff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x65538000-0x65538fff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x68553000-0x6855bfff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x7ad00000-0x7f7fffff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0x7f800000-0xfdffffff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
May 16 21:41:38 hermes kernel: PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
May 16 21:41:38 hermes kernel: [mem 0x7f800000-0xfdffffff] available for PCI devices
May 16 21:41:38 hermes kernel: Booting paravirtualized kernel on bare hardware
May 16 21:41:38 hermes kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
May 16 21:41:38 hermes kernel: setup_percpu: NR_CPUS:320 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
May 16 21:41:38 hermes kernel: percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
May 16 21:41:38 hermes kernel: pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
May 16 21:41:38 hermes kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- 
May 16 21:41:38 hermes kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a88ffea0-6e6c-4138-82c1-e1575b189989 rw loglevel=3 quiet
May 16 21:41:38 hermes kernel: Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
May 16 21:41:38 hermes kernel: Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
May 16 21:41:38 hermes kernel: Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
May 16 21:41:38 hermes kernel: Fallback order for Node 0: 0 
May 16 21:41:38 hermes kernel: Built 1 zonelists, mobility grouping on.  Total pages: 8214054
May 16 21:41:38 hermes kernel: Policy zone: Normal
May 16 21:41:38 hermes kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
May 16 21:41:38 hermes kernel: software IO TLB: area num 16.
May 16 21:41:38 hermes kernel: Memory: 32530740K/33378392K available (16384K kernel code, 2121K rwdata, 12976K rodata, 3456K init, 3732K bss, 847392K reserved, 0K cma-reserved)
May 16 21:41:38 hermes kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
May 16 21:41:38 hermes kernel: Kernel/User page tables isolation: enabled
May 16 21:41:38 hermes kernel: ftrace: allocating 49113 entries in 192 pages
May 16 21:41:38 hermes kernel: ftrace: allocated 192 pages with 2 groups
May 16 21:41:38 hermes kernel: Dynamic Preempt: full
May 16 21:41:38 hermes kernel: rcu: Preemptible hierarchical RCU implementation.
May 16 21:41:38 hermes kernel: rcu:         RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
May 16 21:41:38 hermes kernel: rcu:         RCU priority boosting: priority 1 delay 500 ms.
May 16 21:41:38 hermes kernel:         Trampoline variant of Tasks RCU enabled.
May 16 21:41:38 hermes kernel:         Rude variant of Tasks RCU enabled.
May 16 21:41:38 hermes kernel:         Tracing variant of Tasks RCU enabled.
May 16 21:41:38 hermes kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
May 16 21:41:38 hermes kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
May 16 21:41:38 hermes kernel: NR_IRQS: 20736, nr_irqs: 2152, preallocated irqs: 16
May 16 21:41:38 hermes kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
May 16 21:41:38 hermes kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
May 16 21:41:38 hermes kernel: Console: colour dummy device 80x25
May 16 21:41:38 hermes kernel: printk: legacy console [tty0] enabled
May 16 21:41:38 hermes kernel: ACPI: Core revision 20230628
May 16 21:41:38 hermes kernel: hpet: HPET dysfunctional in PC10. Force disabled.
May 16 21:41:38 hermes kernel: APIC: Switch to symmetric I/O mode setup
May 16 21:41:38 hermes kernel: DMAR: Host address width 39
May 16 21:41:38 hermes kernel: DMAR: DRHD base: 0x000000fed90000 flags: 0x0
May 16 21:41:38 hermes kernel: DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
May 16 21:41:38 hermes kernel: DMAR: DRHD base: 0x000000fed91000 flags: 0x1
May 16 21:41:38 hermes kernel: DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
May 16 21:41:38 hermes kernel: DMAR: RMRR base: 0x0000002c99c000 end: 0x0000002c9bbfff
May 16 21:41:38 hermes kernel: DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff
May 16 21:41:38 hermes kernel: DMAR: RMRR base: 0x0000002ca4e000 end: 0x0000002cacdfff
May 16 21:41:38 hermes kernel: DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
May 16 21:41:38 hermes kernel: DMAR-IR: HPET id 0 under DRHD base 0xfed91000
May 16 21:41:38 hermes kernel: DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
May 16 21:41:38 hermes kernel: DMAR-IR: Enabled IRQ remapping in x2apic mode
May 16 21:41:38 hermes kernel: x2apic enabled
May 16 21:41:38 hermes kernel: APIC: Switched APIC routing to: cluster x2apic
May 16 21:41:38 hermes kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8bf270d8d, max_idle_ns: 881590865083 ns
May 16 21:41:38 hermes kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 7602.45 BogoMIPS (lpj=12666333)
May 16 21:41:38 hermes kernel: x86/cpu: SGX disabled by BIOS.
May 16 21:41:38 hermes kernel: CPU0: Thermal monitoring enabled (TM1)
May 16 21:41:38 hermes kernel: process: using mwait in idle threads
May 16 21:41:38 hermes kernel: Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
May 16 21:41:38 hermes kernel: Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
May 16 21:41:38 hermes kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
May 16 21:41:38 hermes kernel: Spectre V2 : Mitigation: IBRS
May 16 21:41:38 hermes kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
May 16 21:41:38 hermes kernel: Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
May 16 21:41:38 hermes kernel: RETBleed: Mitigation: IBRS
May 16 21:41:38 hermes kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
May 16 21:41:38 hermes kernel: Spectre V2 : User space: Mitigation: STIBP via prctl
May 16 21:41:38 hermes kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
May 16 21:41:38 hermes kernel: MDS: Mitigation: Clear CPU buffers
May 16 21:41:38 hermes kernel: TAA: Mitigation: TSX disabled
May 16 21:41:38 hermes kernel: MMIO Stale Data: Mitigation: Clear CPU buffers
May 16 21:41:38 hermes kernel: SRBDS: Mitigation: Microcode
May 16 21:41:38 hermes kernel: GDS: Mitigation: Microcode
May 16 21:41:38 hermes kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
May 16 21:41:38 hermes kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
May 16 21:41:38 hermes kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
May 16 21:41:38 hermes kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
May 16 21:41:38 hermes kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
May 16 21:41:38 hermes kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
May 16 21:41:38 hermes kernel: x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
May 16 21:41:38 hermes kernel: x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
May 16 21:41:38 hermes kernel: x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
May 16 21:41:38 hermes kernel: Freeing SMP alternatives memory: 40K
May 16 21:41:38 hermes kernel: pid_max: default: 32768 minimum: 301
May 16 21:41:38 hermes kernel: LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
May 16 21:41:38 hermes kernel: landlock: Up and running.
May 16 21:41:38 hermes kernel: Yama: becoming mindful.
May 16 21:41:38 hermes kernel: LSM support for eBPF active
May 16 21:41:38 hermes kernel: Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
May 16 21:41:38 hermes kernel: Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
May 16 21:41:38 hermes kernel: smpboot: CPU0: Intel(R) Xeon(R) E-2186G CPU @ 3.80GHz (family: 0x6, model: 0x9e, stepping: 0xa)
May 16 21:41:38 hermes kernel: RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
May 16 21:41:38 hermes kernel: RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
May 16 21:41:38 hermes kernel: RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
May 16 21:41:38 hermes kernel: Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
May 16 21:41:38 hermes kernel: ... version:                4
May 16 21:41:38 hermes kernel: ... bit width:              48
May 16 21:41:38 hermes kernel: ... generic registers:      4
May 16 21:41:38 hermes kernel: ... value mask:             0000ffffffffffff
May 16 21:41:38 hermes kernel: ... max period:             00007fffffffffff
May 16 21:41:38 hermes kernel: ... fixed-purpose events:   3
May 16 21:41:38 hermes kernel: ... event mask:             000000070000000f
May 16 21:41:38 hermes kernel: signal: max sigframe size: 2032
May 16 21:41:38 hermes kernel: Estimated ratio of average max frequency by base frequency (times 1024): 1212
May 16 21:41:38 hermes kernel: rcu: Hierarchical SRCU implementation.
May 16 21:41:38 hermes kernel: rcu:         Max phase no-delay instances is 1000.
May 16 21:41:38 hermes kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
May 16 21:41:38 hermes kernel: smp: Bringing up secondary CPUs ...
May 16 21:41:38 hermes kernel: smpboot: x86: Booting SMP configuration:
May 16 21:41:38 hermes kernel: .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
May 16 21:41:38 hermes kernel: MDS CPU bug present and SMT on, data leak possible. See [url]https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html[/url] for more details.
May 16 21:41:38 hermes kernel: MMIO Stale Data CPU bug present and SMT on, data leak possible. See [url]https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html[/url] for more details.
May 16 21:41:38 hermes kernel: smp: Brought up 1 node, 12 CPUs
May 16 21:41:38 hermes kernel: smpboot: Max logical packages: 1
May 16 21:41:38 hermes kernel: smpboot: Total of 12 processors activated (91234.49 BogoMIPS)
May 16 21:41:38 hermes kernel: devtmpfs: initialized
May 16 21:41:38 hermes kernel: x86/mm: Memory block size: 128MB
May 16 21:41:38 hermes kernel: ACPI: PM: Registering ACPI NVS region [mem 0x2cb4b000-0x2d044fff] (5218304 bytes)
May 16 21:41:38 hermes kernel: ACPI: PM: Registering ACPI NVS region [mem 0x65537000-0x65537fff] (4096 bytes)
May 16 21:41:38 hermes kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
May 16 21:41:38 hermes kernel: futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
May 16 21:41:38 hermes kernel: pinctrl core: initialized pinctrl subsystem
May 16 21:41:38 hermes kernel: PM: RTC time: 01:41:33, date: 2024-05-17
May 16 21:41:38 hermes kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
May 16 21:41:38 hermes kernel: DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
May 16 21:41:38 hermes kernel: DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
May 16 21:41:38 hermes kernel: DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
May 16 21:41:38 hermes kernel: audit: initializing netlink subsys (disabled)
May 16 21:41:38 hermes kernel: audit: type=2000 audit(1715910093.013:1): state=initialized audit_enabled=0 res=1
May 16 21:41:38 hermes kernel: thermal_sys: Registered thermal governor 'fair_share'
May 16 21:41:38 hermes kernel: thermal_sys: Registered thermal governor 'bang_bang'
May 16 21:41:38 hermes kernel: thermal_sys: Registered thermal governor 'step_wise'
May 16 21:41:38 hermes kernel: thermal_sys: Registered thermal governor 'user_space'
May 16 21:41:38 hermes kernel: thermal_sys: Registered thermal governor 'power_allocator'
May 16 21:41:38 hermes kernel: cpuidle: using governor ladder
May 16 21:41:38 hermes kernel: cpuidle: using governor menu
May 16 21:41:38 hermes kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
May 16 21:41:38 hermes kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
May 16 21:41:38 hermes kernel: PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
May 16 21:41:38 hermes kernel: PCI: not using ECAM ([mem 0xf0000000-0xf7ffffff] not reserved)
May 16 21:41:38 hermes kernel: PCI: Using configuration type 1 for base access
May 16 21:41:38 hermes kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
May 16 21:41:38 hermes kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
May 16 21:41:38 hermes kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
May 16 21:41:38 hermes kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
May 16 21:41:38 hermes kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
May 16 21:41:38 hermes kernel: ACPI: Added _OSI(Module Device)
May 16 21:41:38 hermes kernel: ACPI: Added _OSI(Processor Device)
May 16 21:41:38 hermes kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
May 16 21:41:38 hermes kernel: ACPI: Added _OSI(Processor Aggregator Device)
May 16 21:41:38 hermes kernel: ACPI: 10 ACPI AML tables successfully acquired and loaded
May 16 21:41:38 hermes kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
May 16 21:41:38 hermes kernel: ACPI: Dynamic OEM Table Load:
May 16 21:41:38 hermes kernel: ACPI: SSDT 0xFFFF97FB814E6800 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: Dynamic OEM Table Load:
May 16 21:41:38 hermes kernel: ACPI: SSDT 0xFFFF97FB814DD800 00070D (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: Dynamic OEM Table Load:
May 16 21:41:38 hermes kernel: ACPI: SSDT 0xFFFF97FB814C3600 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: Dynamic OEM Table Load:
May 16 21:41:38 hermes kernel: ACPI: SSDT 0xFFFF97FB814DF800 0005FC (v02 PmRef  ApIst    00003000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: Dynamic OEM Table Load:
May 16 21:41:38 hermes kernel: ACPI: SSDT 0xFFFF97FB814E2400 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: Dynamic OEM Table Load:
May 16 21:41:38 hermes kernel: ACPI: SSDT 0xFFFF97FB814ED000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: Dynamic OEM Table Load:
May 16 21:41:38 hermes kernel: ACPI: SSDT 0xFFFF97FB814E3400 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
May 16 21:41:38 hermes kernel: ACPI: _OSC evaluated successfully for all CPUs
May 16 21:41:38 hermes kernel: ACPI: Interpreter enabled
May 16 21:41:38 hermes kernel: ACPI: PM: (supports S0 S3 S4 S5)
May 16 21:41:38 hermes kernel: ACPI: Using IOAPIC for interrupt routing
May 16 21:41:38 hermes kernel: PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
May 16 21:41:38 hermes kernel: PCI: ECAM [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource
May 16 21:41:38 hermes kernel: HEST: Table parsing has been initialized.
May 16 21:41:38 hermes kernel: GHES: APEI firmware first mode is enabled by APEI bit.
May 16 21:41:38 hermes kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
May 16 21:41:38 hermes kernel: PCI: Ignoring E820 reservations for host bridge windows
May 16 21:41:38 hermes kernel: ACPI: Enabled 11 GPEs in block 00 to 7F
May 16 21:41:38 hermes kernel: ACPI Error: No handler for Region [WST1] ((____ptrval____)) [GenericSerialBus] (20230628/evregion-130)
May 16 21:41:38 hermes kernel: ACPI Error: Region GenericSerialBus (ID=9) has no handler (20230628/exfldio-261)
May 16 21:41:38 hermes kernel: ACPI Error: Aborting method \_SB.PCI0.I2C0.PAS1 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
May 16 21:41:38 hermes kernel: ACPI Error: Aborting method \_GPE._L20 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
May 16 21:41:38 hermes kernel: ACPI Error: AE_NOT_EXIST, while evaluating GPE method [_L20] (20230628/evgpe-511)
May 16 21:41:38 hermes kernel: ACPI: \_SB_.PCI0.XDCI.USBC: New power resource
May 16 21:41:38 hermes kernel: ACPI: \_SB_.PCI0.SAT0.VOL0.V0PR: New power resource
May 16 21:41:38 hermes kernel: ACPI: \_SB_.PCI0.SAT0.VOL1.V1PR: New power resource
May 16 21:41:38 hermes kernel: ACPI: \_SB_.PCI0.SAT0.VOL2.V2PR: New power resource
May 16 21:41:38 hermes kernel: ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
May 16 21:41:38 hermes kernel: ACPI: \_TZ_.FN00: New power resource
May 16 21:41:38 hermes kernel: ACPI: \_TZ_.FN01: New power resource
May 16 21:41:38 hermes kernel: ACPI: \_TZ_.FN02: New power resource
May 16 21:41:38 hermes kernel: ACPI: \_TZ_.FN03: New power resource
May 16 21:41:38 hermes kernel: ACPI: \_TZ_.FN04: New power resource
May 16 21:41:38 hermes kernel: ACPI: \PIN_: New power resource
May 16 21:41:38 hermes kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
May 16 21:41:38 hermes kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
May 16 21:41:38 hermes kernel: acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
May 16 21:41:38 hermes kernel: acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
May 16 21:41:38 hermes kernel: acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
May 16 21:41:38 hermes kernel: PCI host bridge to bus 0000:00
May 16 21:41:38 hermes kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000effff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: root bus resource [bus 00-7e]
May 16 21:41:38 hermes kernel: pci 0000:00:00.0: [8086:3ec6] type 00 class 0x060000 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port
May 16 21:41:38 hermes kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
May 16 21:41:38 hermes kernel: pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
May 16 21:41:38 hermes kernel: pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa40fffff]
May 16 21:41:38 hermes kernel: pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
May 16 21:41:38 hermes kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:00:02.0: [8086:3e96] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:02.0: BAR 0 [mem 0xa2000000-0xa2ffffff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:02.0: BAR 2 [mem 0x80000000-0x8fffffff 64bit pref]
May 16 21:41:38 hermes kernel: pci 0000:00:02.0: BAR 4 [io  0x4000-0x403f]
May 16 21:41:38 hermes kernel: pci 0000:00:02.0: BAR 2: assigned to efifb
May 16 21:41:38 hermes kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
May 16 21:41:38 hermes kernel: pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:08.0: BAR 0 [mem 0x400011b000-0x400011bfff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:12.0: [8086:a379] type 00 class 0x118000 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:12.0: BAR 0 [mem 0x400011a000-0x400011afff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:14.0: BAR 0 [mem 0x4000100000-0x400010ffff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:14.2: BAR 0 [mem 0x4000114000-0x4000115fff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:14.2: BAR 2 [mem 0x4000119000-0x4000119fff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:16.0: [8086:a360] type 00 class 0x078000 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:16.0: BAR 0 [mem 0x4000117000-0x4000117fff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:16.0: PME# supported from D3hot
May 16 21:41:38 hermes kernel: pci 0000:00:17.0: [8086:a352] type 00 class 0x010601 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:17.0: BAR 0 [mem 0xa4320000-0xa4321fff]
May 16 21:41:38 hermes kernel: pci 0000:00:17.0: BAR 1 [mem 0xa4323000-0xa43230ff]
May 16 21:41:38 hermes kernel: pci 0000:00:17.0: BAR 2 [io  0x4090-0x4097]
May 16 21:41:38 hermes kernel: pci 0000:00:17.0: BAR 3 [io  0x4080-0x4083]
May 16 21:41:38 hermes kernel: pci 0000:00:17.0: BAR 4 [io  0x4060-0x407f]
May 16 21:41:38 hermes kernel: pci 0000:00:17.0: BAR 5 [mem 0xa4322000-0xa43227ff]
May 16 21:41:38 hermes kernel: pci 0000:00:17.0: PME# supported from D3hot
May 16 21:41:38 hermes kernel: pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400 PCIe Root Port
May 16 21:41:38 hermes kernel: pci 0000:00:1b.0: PCI bridge to [bus 02]
May 16 21:41:38 hermes kernel: pci 0000:00:1b.0:   bridge window [mem 0xa4200000-0xa42fffff]
May 16 21:41:38 hermes kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
May 16 21:41:38 hermes kernel: pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400 PCIe Root Port
May 16 21:41:38 hermes kernel: pci 0000:00:1c.0: PCI bridge to [bus 03]
May 16 21:41:38 hermes kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:00:1c.4: [8086:a33c] type 01 class 0x060400 PCIe Root Port
May 16 21:41:38 hermes kernel: pci 0000:00:1c.4: PCI bridge to [bus 04]
May 16 21:41:38 hermes kernel: pci 0000:00:1c.4:   bridge window [mem 0xa4100000-0xa41fffff]
May 16 21:41:38 hermes kernel: pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
May 16 21:41:38 hermes kernel: pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400 PCIe Root Port
May 16 21:41:38 hermes kernel: pci 0000:00:1d.0: PCI bridge to [bus 05]
May 16 21:41:38 hermes kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:00:1d.2: [8086:a332] type 01 class 0x060400 PCIe Root Port
May 16 21:41:38 hermes kernel: pci 0000:00:1d.2: PCI bridge to [bus 06-07]
May 16 21:41:38 hermes kernel: pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:00:1d.2: PTM enabled (root), 4ns granularity
May 16 21:41:38 hermes kernel: pci 0000:00:1f.0: [8086:a309] type 00 class 0x060100 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:1f.3: BAR 0 [mem 0x4000110000-0x4000113fff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:1f.3: BAR 4 [mem 0x4000000000-0x40000fffff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:1f.3: PME# supported from D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:1f.4: BAR 0 [mem 0x4000116000-0x40001160ff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
May 16 21:41:38 hermes kernel: pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
May 16 21:41:38 hermes kernel: pci 0000:00:1f.6: [8086:15bb] type 00 class 0x020000 conventional PCI endpoint
May 16 21:41:38 hermes kernel: pci 0000:00:1f.6: BAR 0 [mem 0xa4300000-0xa431ffff]
May 16 21:41:38 hermes kernel: pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:01:00.0: [10de:1f82] type 00 class 0x030000 PCIe Legacy Endpoint
May 16 21:41:38 hermes kernel: pci 0000:01:00.0: BAR 0 [mem 0xa3000000-0xa3ffffff]
May 16 21:41:38 hermes kernel: pci 0000:01:00.0: BAR 1 [mem 0x90000000-0x9fffffff 64bit pref]
May 16 21:41:38 hermes kernel: pci 0000:01:00.0: BAR 3 [mem 0xa0000000-0xa1ffffff 64bit pref]
May 16 21:41:38 hermes kernel: pci 0000:01:00.0: BAR 5 [io  0x3000-0x307f]
May 16 21:41:38 hermes kernel: pci 0000:01:00.0: ROM [mem 0xa4000000-0xa407ffff pref]
May 16 21:41:38 hermes kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:01:00.1: [10de:10fa] type 00 class 0x040300 PCIe Endpoint
May 16 21:41:38 hermes kernel: pci 0000:01:00.1: BAR 0 [mem 0xa4080000-0xa4083fff]
May 16 21:41:38 hermes kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
May 16 21:41:38 hermes kernel: pci 0000:02:00.0: [1179:011a] type 00 class 0x010802 PCIe Endpoint
May 16 21:41:38 hermes kernel: pci 0000:02:00.0: BAR 0 [mem 0xa4200000-0xa4203fff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:00:1b.0: PCI bridge to [bus 02]
May 16 21:41:38 hermes kernel: acpiphp: Slot [1] registered
May 16 21:41:38 hermes kernel: pci 0000:00:1c.0: PCI bridge to [bus 03]
May 16 21:41:38 hermes kernel: pci 0000:04:00.0: [8086:2725] type 00 class 0x028000 PCIe Endpoint
May 16 21:41:38 hermes kernel: pci 0000:04:00.0: BAR 0 [mem 0xa4100000-0xa4103fff 64bit]
May 16 21:41:38 hermes kernel: pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:00:1c.4: PCI bridge to [bus 04]
May 16 21:41:38 hermes kernel: acpiphp: Slot [1-1] registered
May 16 21:41:38 hermes kernel: pci 0000:00:1d.0: PCI bridge to [bus 05]
May 16 21:41:38 hermes kernel: pci 0000:06:00.0: [1b21:1080] type 01 class 0x060400 PCIe to PCI/PCI-X bridge
May 16 21:41:38 hermes kernel: pci 0000:06:00.0: PCI bridge to [bus 07]
May 16 21:41:38 hermes kernel: pci 0000:06:00.0: supports D1 D2
May 16 21:41:38 hermes kernel: pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
May 16 21:41:38 hermes kernel: pci 0000:00:1d.2: PCI bridge to [bus 06-07]
May 16 21:41:38 hermes kernel: pci_bus 0000:07: extended config space not accessible
May 16 21:41:38 hermes kernel: pci 0000:06:00.0: PCI bridge to [bus 07]
May 16 21:41:38 hermes kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 0
May 16 21:41:38 hermes kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 1
May 16 21:41:38 hermes kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 0
May 16 21:41:38 hermes kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 1
May 16 21:41:38 hermes kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 1
May 16 21:41:38 hermes kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 1
May 16 21:41:38 hermes kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 1
May 16 21:41:38 hermes kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 1
May 16 21:41:38 hermes kernel: iommu: Default domain type: Translated
May 16 21:41:38 hermes kernel: iommu: DMA domain TLB invalidation policy: lazy mode
May 16 21:41:38 hermes kernel: SCSI subsystem initialized
May 16 21:41:38 hermes kernel: libata version 3.00 loaded.
May 16 21:41:38 hermes kernel: ACPI: bus type USB registered
May 16 21:41:38 hermes kernel: usbcore: registered new interface driver usbfs
May 16 21:41:38 hermes kernel: usbcore: registered new interface driver hub
May 16 21:41:38 hermes kernel: usbcore: registered new device driver usb
May 16 21:41:38 hermes kernel: EDAC MC: Ver: 3.0.0
May 16 21:41:38 hermes kernel: efivars: Registered efivars operations
May 16 21:41:38 hermes kernel: NetLabel: Initializing
May 16 21:41:38 hermes kernel: NetLabel:  domain hash size = 128
May 16 21:41:38 hermes kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
May 16 21:41:38 hermes kernel: NetLabel:  unlabeled traffic allowed by default
May 16 21:41:38 hermes kernel: mctp: management component transport protocol core
May 16 21:41:38 hermes kernel: NET: Registered PF_MCTP protocol family
May 16 21:41:38 hermes kernel: PCI: Using ACPI for IRQ routing
May 16 21:41:38 hermes kernel: PCI: pci_cache_line_size set to 64 bytes
May 16 21:41:38 hermes kernel: e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
May 16 21:41:38 hermes kernel: e820: reserve RAM buffer [mem 0x01012000-0x03ffffff]
May 16 21:41:38 hermes kernel: e820: reserve RAM buffer [mem 0x0725d018-0x07ffffff]
May 16 21:41:38 hermes kernel: e820: reserve RAM buffer [mem 0x27923000-0x27ffffff]
May 16 21:41:38 hermes kernel: e820: reserve RAM buffer [mem 0x2bfb4000-0x2bffffff]
May 16 21:41:38 hermes kernel: e820: reserve RAM buffer [mem 0x2dc17000-0x2fffffff]
May 16 21:41:38 hermes kernel: e820: reserve RAM buffer [mem 0x48bc3000-0x4bffffff]
May 16 21:41:38 hermes kernel: e820: reserve RAM buffer [mem 0x65537000-0x67ffffff]
May 16 21:41:38 hermes kernel: e820: reserve RAM buffer [mem 0x68553000-0x6bffffff]
May 16 21:41:38 hermes kernel: e820: reserve RAM buffer [mem 0x7ad00000-0x7bffffff]
May 16 21:41:38 hermes kernel: e820: reserve RAM buffer [mem 0x87c800000-0x87fffffff]
May 16 21:41:38 hermes kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
May 16 21:41:38 hermes kernel: pci 0000:00:02.0: vgaarb: bridge control possible
May 16 21:41:38 hermes kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
May 16 21:41:38 hermes kernel: pci 0000:01:00.0: vgaarb: bridge control possible
May 16 21:41:38 hermes kernel: pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
May 16 21:41:38 hermes kernel: vgaarb: loaded
May 16 21:41:38 hermes kernel: clocksource: Switched to clocksource tsc-early
May 16 21:41:38 hermes kernel: VFS: Disk quotas dquot_6.6.0
May 16 21:41:38 hermes kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
May 16 21:41:38 hermes kernel: pnp: PnP ACPI init
May 16 21:41:38 hermes kernel: system 00:00: [mem 0x40000000-0x403fffff] has been reserved
May 16 21:41:38 hermes kernel: system 00:01: [io  0x0a00-0x0a3f] has been reserved
May 16 21:41:38 hermes kernel: system 00:01: [io  0x0a40-0x0a7f] has been reserved
May 16 21:41:38 hermes kernel: pnp 00:02: [dma 0 disabled]
May 16 21:41:38 hermes kernel: system 00:03: [io  0x0680-0x069f] has been reserved
May 16 21:41:38 hermes kernel: system 00:03: [io  0x164e-0x164f] has been reserved
May 16 21:41:38 hermes kernel: system 00:05: [io  0x1854-0x1857] has been reserved
May 16 21:41:38 hermes kernel: system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
May 16 21:41:38 hermes kernel: system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
May 16 21:41:38 hermes kernel: system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
May 16 21:41:38 hermes kernel: system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved
May 16 21:41:38 hermes kernel: system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
May 16 21:41:38 hermes kernel: system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
May 16 21:41:38 hermes kernel: system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
May 16 21:41:38 hermes kernel: system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
May 16 21:41:38 hermes kernel: system 00:07: [io  0x1800-0x18fe] could not be reserved
May 16 21:41:38 hermes kernel: system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved
May 16 21:41:38 hermes kernel: system 00:07: [mem 0xfd6c0000-0xfd6cffff] has been reserved
May 16 21:41:38 hermes kernel: system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved
May 16 21:41:38 hermes kernel: system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
May 16 21:41:38 hermes kernel: system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved
May 16 21:41:38 hermes kernel: system 00:07: [mem 0xff000000-0xffffffff] has been reserved
May 16 21:41:38 hermes kernel: system 00:08: [io  0x2000-0x20fe] has been reserved
May 16 21:41:38 hermes kernel: pnp: PnP ACPI: found 10 devices
May 16 21:41:38 hermes kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
May 16 21:41:38 hermes kernel: NET: Registered PF_INET protocol family
May 16 21:41:38 hermes kernel: IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
May 16 21:41:38 hermes kernel: tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
May 16 21:41:38 hermes kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
May 16 21:41:38 hermes kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
May 16 21:41:38 hermes kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
May 16 21:41:38 hermes kernel: TCP: Hash tables configured (established 262144 bind 65536)
May 16 21:41:38 hermes kernel: MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
May 16 21:41:38 hermes kernel: UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
May 16 21:41:38 hermes kernel: UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
May 16 21:41:38 hermes kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
May 16 21:41:38 hermes kernel: NET: Registered PF_XDP protocol family
May 16 21:41:38 hermes kernel: pci 0000:00:15.0: BAR 0 [mem 0x4000118000-0x4000118fff 64bit]: assigned
May 16 21:41:38 hermes kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
May 16 21:41:38 hermes kernel: pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
May 16 21:41:38 hermes kernel: pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa40fffff]
May 16 21:41:38 hermes kernel: pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
May 16 21:41:38 hermes kernel: pci 0000:00:1b.0: PCI bridge to [bus 02]
May 16 21:41:38 hermes kernel: pci 0000:00:1b.0:   bridge window [mem 0xa4200000-0xa42fffff]
May 16 21:41:38 hermes kernel: pci 0000:00:1c.0: PCI bridge to [bus 03]
May 16 21:41:38 hermes kernel: pci 0000:00:1c.4: PCI bridge to [bus 04]
May 16 21:41:38 hermes kernel: pci 0000:00:1c.4:   bridge window [mem 0xa4100000-0xa41fffff]
May 16 21:41:38 hermes kernel: pci 0000:00:1d.0: PCI bridge to [bus 05]
May 16 21:41:38 hermes kernel: pci 0000:06:00.0: PCI bridge to [bus 07]
May 16 21:41:38 hermes kernel: pci 0000:00:1d.2: PCI bridge to [bus 06-07]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: resource 7 [mem 0x000e4000-0x000effff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: resource 8 [mem 0x7f800000-0xefffffff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:00: resource 10 [mem 0xfc800000-0xfe7fffff window]
May 16 21:41:38 hermes kernel: pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
May 16 21:41:38 hermes kernel: pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
May 16 21:41:38 hermes kernel: pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
May 16 21:41:38 hermes kernel: pci_bus 0000:02: resource 1 [mem 0xa4200000-0xa42fffff]
May 16 21:41:38 hermes kernel: pci_bus 0000:04: resource 1 [mem 0xa4100000-0xa41fffff]
May 16 21:41:38 hermes kernel: pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
May 16 21:41:38 hermes kernel: pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
May 16 21:41:38 hermes kernel: pci 0000:06:00.0: Disabling ASPM L0s/L1
May 16 21:41:38 hermes kernel: pci 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
May 16 21:41:38 hermes kernel: PCI: CLS 64 bytes, default 64
May 16 21:41:38 hermes kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
May 16 21:41:38 hermes kernel: software IO TLB: mapped [mem 0x0000000076d00000-0x000000007ad00000] (64MB)
May 16 21:41:38 hermes kernel: Trying to unpack rootfs image as initramfs...
May 16 21:41:38 hermes kernel: Initialise system trusted keyrings
May 16 21:41:38 hermes kernel: Key type blacklist registered
May 16 21:41:38 hermes kernel: workingset: timestamp_bits=41 max_order=23 bucket_order=0
May 16 21:41:38 hermes kernel: zbud: loaded
May 16 21:41:38 hermes kernel: fuse: init (API version 7.39)
May 16 21:41:38 hermes kernel: integrity: Platform Keyring initialized
May 16 21:41:38 hermes kernel: integrity: Machine keyring initialized
May 16 21:41:38 hermes kernel: Key type asymmetric registered
May 16 21:41:38 hermes kernel: Asymmetric key parser 'x509' registered
May 16 21:41:38 hermes kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
May 16 21:41:38 hermes kernel: io scheduler mq-deadline registered
May 16 21:41:38 hermes kernel: io scheduler kyber registered
May 16 21:41:38 hermes kernel: io scheduler bfq registered
May 16 21:41:38 hermes kernel: pcieport 0000:00:01.0: AER: enabled with IRQ 122
May 16 21:41:38 hermes kernel: pcieport 0000:00:1b.0: AER: enabled with IRQ 123
May 16 21:41:38 hermes kernel: pcieport 0000:00:1b.0: DPC: enabled with IRQ 123
May 16 21:41:38 hermes kernel: pcieport 0000:00:1b.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
May 16 21:41:38 hermes kernel: pcieport 0000:00:1c.4: AER: enabled with IRQ 125
May 16 21:41:38 hermes kernel: pcieport 0000:00:1c.4: DPC: enabled with IRQ 125
May 16 21:41:38 hermes kernel: pcieport 0000:00:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
May 16 21:41:38 hermes kernel: pcieport 0000:00:1d.2: AER: enabled with IRQ 127
May 16 21:41:38 hermes kernel: pcieport 0000:00:1d.2: DPC: enabled with IRQ 127
May 16 21:41:38 hermes kernel: pcieport 0000:00:1d.2: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
May 16 21:41:38 hermes kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May 16 21:41:38 hermes kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
May 16 21:41:38 hermes kernel: ACPI: button: Sleep Button [SLPB]
May 16 21:41:38 hermes kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
May 16 21:41:38 hermes kernel: ACPI: button: Power Button [PWRB]
May 16 21:41:38 hermes kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
May 16 21:41:38 hermes kernel: ACPI: button: Power Button [PWRF]
May 16 21:41:38 hermes kernel: thermal LNXTHERM:00: registered as thermal_zone0
May 16 21:41:38 hermes kernel: ACPI: thermal: Thermal Zone [TZ00] (28 C)
May 16 21:41:38 hermes kernel: ERST: Error Record Serialization Table (ERST) support is initialized.
May 16 21:41:38 hermes kernel: pstore: Using crash dump compression: deflate
May 16 21:41:38 hermes kernel: pstore: Registered erst as persistent store backend
May 16 21:41:38 hermes kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
May 16 21:41:38 hermes kernel: 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
May 16 21:41:38 hermes kernel: hpet_acpi_add: no address or irqs in _CRS
May 16 21:41:38 hermes kernel: Non-volatile memory driver v1.3
May 16 21:41:38 hermes kernel: Linux agpgart interface v0.103
May 16 21:41:38 hermes kernel: tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
May 16 21:41:38 hermes kernel: ACPI: bus type drm_connector registered
May 16 21:41:38 hermes kernel: ahci 0000:00:17.0: version 3.0
May 16 21:41:38 hermes kernel: ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
May 16 21:41:38 hermes kernel: ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst 
May 16 21:41:38 hermes kernel: Freeing initrd memory: 109000K
May 16 21:41:38 hermes kernel: scsi host0: ahci
May 16 21:41:38 hermes kernel: scsi host1: ahci
May 16 21:41:38 hermes kernel: scsi host2: ahci
May 16 21:41:38 hermes kernel: scsi host3: ahci
May 16 21:41:38 hermes kernel: ata1: SATA max UDMA/133 abar m2048@0xa4322000 port 0xa4322100 irq 128 lpm-pol 0
May 16 21:41:38 hermes kernel: ata2: SATA max UDMA/133 abar m2048@0xa4322000 port 0xa4322180 irq 128 lpm-pol 0
May 16 21:41:38 hermes kernel: ata3: SATA max UDMA/133 abar m2048@0xa4322000 port 0xa4322200 irq 128 lpm-pol 0
May 16 21:41:38 hermes kernel: ata4: SATA max UDMA/133 abar m2048@0xa4322000 port 0xa4322280 irq 128 lpm-pol 0
May 16 21:41:38 hermes kernel: usbcore: registered new interface driver usbserial_generic
May 16 21:41:38 hermes kernel: usbserial: USB Serial support registered for generic
May 16 21:41:38 hermes kernel: rtc_cmos 00:04: RTC can wake from S4
May 16 21:41:38 hermes kernel: rtc_cmos 00:04: registered as rtc0
May 16 21:41:38 hermes kernel: rtc_cmos 00:04: setting system clock to 2024-05-17T01:41:33 UTC (1715910093)
May 16 21:41:38 hermes kernel: rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
May 16 21:41:38 hermes kernel: intel_pstate: Intel P-state driver initializing
May 16 21:41:38 hermes kernel: intel_pstate: Disabling energy efficiency optimization
May 16 21:41:38 hermes kernel: intel_pstate: HWP enabled
May 16 21:41:38 hermes kernel: ledtrig-cpu: registered to indicate activity on CPUs
May 16 21:41:38 hermes kernel: [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
May 16 21:41:38 hermes kernel: fbcon: Deferring console take-over
May 16 21:41:38 hermes kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
May 16 21:41:38 hermes kernel: hid: raw HID events driver (C) Jiri Kosina
May 16 21:41:38 hermes kernel: drop_monitor: Initializing network drop monitor service
May 16 21:41:38 hermes kernel: NET: Registered PF_INET6 protocol family
May 16 21:41:38 hermes kernel: Segment Routing with IPv6
May 16 21:41:38 hermes kernel: RPL Segment Routing with IPv6
May 16 21:41:38 hermes kernel: In-situ OAM (IOAM) with IPv6
May 16 21:41:38 hermes kernel: NET: Registered PF_PACKET protocol family
May 16 21:41:38 hermes kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
May 16 21:41:38 hermes kernel: microcode: Current revision: 0x000000f6
May 16 21:41:38 hermes kernel: microcode: Updated early from: 0x000000f4
May 16 21:41:38 hermes kernel: IPI shorthand broadcast: enabled
May 16 21:41:38 hermes kernel: sched_clock: Marking stable (518672225, 12662871)->(564917864, -33582768)
May 16 21:41:38 hermes kernel: registered taskstats version 1
May 16 21:41:38 hermes kernel: Loading compiled-in X.509 certificates
May 16 21:41:38 hermes kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 4183282d70f116b65f2696270db916493ab86dc2'
May 16 21:41:38 hermes kernel: zswap: loaded using pool zstd/zsmalloc
May 16 21:41:38 hermes kernel: Key type .fscrypt registered
May 16 21:41:38 hermes kernel: Key type fscrypt-provisioning registered
May 16 21:41:38 hermes kernel: integrity: Loading X.509 certificate: UEFI:db
May 16 21:41:38 hermes kernel: integrity: Loaded X.509 cert 'Database Key: 00dce0d981cc20b1d97734b6680e895d56'
May 16 21:41:38 hermes kernel: integrity: Loading X.509 certificate: UEFI:db
May 16 21:41:38 hermes kernel: integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
May 16 21:41:38 hermes kernel: integrity: Loading X.509 certificate: UEFI:db
May 16 21:41:38 hermes kernel: integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
May 16 21:41:38 hermes kernel: PM:   Magic number: 8:506:660
May 16 21:41:38 hermes kernel: RAS: Correctable Errors collector initialized.
May 16 21:41:38 hermes kernel: clk: Disabling unused clocks
May 16 21:41:38 hermes kernel: ata4: SATA link down (SStatus 4 SControl 300)
May 16 21:41:38 hermes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 16 21:41:38 hermes kernel: ata3: SATA link down (SStatus 4 SControl 300)
May 16 21:41:38 hermes kernel: ata2: SATA link down (SStatus 4 SControl 300)
May 16 21:41:38 hermes kernel: ata1.00: ATA-10: WDC WD40EZAZ-00SF3B0, 80.00A80, max UDMA/133
May 16 21:41:38 hermes kernel: ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
May 16 21:41:38 hermes kernel: ata1.00: Features: NCQ-prio
May 16 21:41:38 hermes kernel: ata1.00: configured for UDMA/133
May 16 21:41:38 hermes kernel: scsi 0:0:0:0: Direct-Access     ATA      WDC WD40EZAZ-00S 0A80 PQ: 0 ANSI: 5
May 16 21:41:38 hermes kernel: sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
May 16 21:41:38 hermes kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
May 16 21:41:38 hermes kernel: sd 0:0:0:0: [sda] Write Protect is off
May 16 21:41:38 hermes kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 16 21:41:38 hermes kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 16 21:41:38 hermes kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
May 16 21:41:38 hermes kernel:  sda: sda1 sda2 sda3 sda4
May 16 21:41:38 hermes kernel: sd 0:0:0:0: [sda] Attached SCSI disk
May 16 21:41:38 hermes kernel: Freeing unused decrypted memory: 2028K
May 16 21:41:38 hermes kernel: Freeing unused kernel image (initmem) memory: 3456K
May 16 21:41:38 hermes kernel: Write protecting the kernel read-only data: 30720k
May 16 21:41:38 hermes kernel: Freeing unused kernel image (rodata/data gap) memory: 1360K
May 16 21:41:38 hermes kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
May 16 21:41:38 hermes kernel: rodata_test: all tests were successful
May 16 21:41:38 hermes kernel: x86/mm: Checking user space page tables
May 16 21:41:38 hermes kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
May 16 21:41:38 hermes kernel: Run /init as init process
May 16 21:41:38 hermes kernel:   with arguments:
May 16 21:41:38 hermes kernel:     /init
May 16 21:41:38 hermes kernel:   with environment:
May 16 21:41:38 hermes kernel:     HOME=/
May 16 21:41:38 hermes kernel:     TERM=linux
May 16 21:41:38 hermes kernel:     BOOT_IMAGE=/boot/vmlinuz-linux
May 16 21:41:38 hermes kernel: nvidia: loading out-of-tree module taints kernel.
May 16 21:41:38 hermes kernel: nvidia: module verification failed: signature and/or required key missing - tainting kernel
May 16 21:41:38 hermes kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 242
May 16 21:41:38 hermes kernel: 
May 16 21:41:38 hermes kernel: nvidia 0000:01:00.0: enabling device (0100 -> 0103)
May 16 21:41:38 hermes kernel: nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
May 16 21:41:38 hermes kernel: NVRM: loading NVIDIA UNIX Open Kernel Module for x86_64  550.78  Release Build  (archlinux-builder@)  
May 16 21:41:38 hermes kernel: wmi_bus wmi_bus-PNP0C14:04: WQBC data block query control method not found
May 16 21:41:38 hermes kernel: nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for x86_64  550.78  Release Build  (archlinux-builder@)  
May 16 21:41:38 hermes kernel: tsc: Refined TSC clocksource calibration: 3792.001 MHz
May 16 21:41:38 hermes kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d51a7cf3b3, max_idle_ns: 881590686630 ns
May 16 21:41:38 hermes kernel: clocksource: Switched to clocksource tsc
May 16 21:41:38 hermes kernel: nvidia-uvm: Loaded the UVM driver, major device number 240.
May 16 21:41:38 hermes kernel: [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
May 16 21:41:38 hermes kernel: [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
May 16 21:41:38 hermes kernel: nvidia 0000:01:00.0: [drm] Cannot find any crtc or sizes
May 16 21:41:38 hermes kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
May 16 21:41:38 hermes kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
May 16 21:41:38 hermes kernel: xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
May 16 21:41:38 hermes kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
May 16 21:41:38 hermes kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
May 16 21:41:38 hermes kernel: xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
May 16 21:41:38 hermes kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
May 16 21:41:38 hermes kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 16 21:41:38 hermes kernel: usb usb1: Product: xHCI Host Controller
May 16 21:41:38 hermes kernel: usb usb1: Manufacturer: Linux 6.8.9-arch1-2 xhci-hcd
May 16 21:41:38 hermes kernel: usb usb1: SerialNumber: 0000:00:14.0
May 16 21:41:38 hermes kernel: hub 1-0:1.0: USB hub found
May 16 21:41:38 hermes kernel: hub 1-0:1.0: 16 ports detected
May 16 21:41:38 hermes kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
May 16 21:41:38 hermes kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 16 21:41:38 hermes kernel: usb usb2: Product: xHCI Host Controller
May 16 21:41:38 hermes kernel: usb usb2: Manufacturer: Linux 6.8.9-arch1-2 xhci-hcd
May 16 21:41:38 hermes kernel: usb usb2: SerialNumber: 0000:00:14.0
May 16 21:41:38 hermes kernel: hub 2-0:1.0: USB hub found
May 16 21:41:38 hermes kernel: hub 2-0:1.0: 10 ports detected
May 16 21:41:38 hermes kernel: nvme nvme0: pci function 0000:02:00.0
May 16 21:41:38 hermes kernel: nvme nvme0: 12/0/0 default/read/poll queues
May 16 21:41:38 hermes kernel:  nvme0n1: p1 p2 p3 p4 p6
May 16 21:41:38 hermes kernel: usb 1-2: new full-speed USB device number 2 using xhci_hcd
May 16 21:41:38 hermes kernel: usb 1-2: New USB device found, idVendor=0c76, idProduct=161e, bcdDevice= 1.00
May 16 21:41:38 hermes kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
May 16 21:41:38 hermes kernel: usb 1-2: Product: USB PnP Audio Device
May 16 21:41:38 hermes kernel: usbcore: registered new interface driver usbhid
May 16 21:41:38 hermes kernel: usbhid: USB HID core driver
May 16 21:41:38 hermes kernel: input: USB PnP Audio Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:0C76:161E.0001/input/input3
May 16 21:41:38 hermes kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
May 16 21:41:38 hermes kernel: i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
May 16 21:41:38 hermes kernel: hid-generic 0003:0C76:161E.0001: input,hidraw0: USB HID v1.00 Device [USB PnP Audio Device] on usb-0000:00:14.0-2/input2
May 16 21:41:38 hermes kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
May 16 21:41:38 hermes kernel: usb 1-8: new full-speed USB device number 3 using xhci_hcd
May 16 21:41:38 hermes kernel: usb 1-8: New USB device found, idVendor=046a, idProduct=c091, bcdDevice= 1.05
May 16 21:41:38 hermes kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 16 21:41:38 hermes kernel: usb 1-8: Product: CHERRY Wireless Desktop
May 16 21:41:38 hermes kernel: usb 1-8: Manufacturer: Cherry GmbH
May 16 21:41:38 hermes kernel: input: Cherry GmbH CHERRY Wireless Desktop as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046A:C091.0002/input/input4
May 16 21:41:38 hermes kernel: hid-generic 0003:046A:C091.0002: input,hidraw1: USB HID v1.11 Keyboard [Cherry GmbH CHERRY Wireless Desktop] on usb-0000:00:14.0-8/input0
May 16 21:41:38 hermes kernel: input: Cherry GmbH CHERRY Wireless Desktop Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046A:C091.0003/input/input5
May 16 21:41:38 hermes kernel: input: Cherry GmbH CHERRY Wireless Desktop as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046A:C091.0003/input/input6
May 16 21:41:38 hermes kernel: input: Cherry GmbH CHERRY Wireless Desktop Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046A:C091.0003/input/input7
May 16 21:41:38 hermes kernel: input: Cherry GmbH CHERRY Wireless Desktop System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046A:C091.0003/input/input8
May 16 21:41:38 hermes kernel: hid-generic 0003:046A:C091.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Cherry GmbH CHERRY Wireless Desktop] on usb-0000:00:14.0-8/input1
May 16 21:41:38 hermes kernel: i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP
May 16 21:41:38 hermes kernel: [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 2
May 16 21:41:38 hermes kernel: ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
May 16 21:41:38 hermes kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
May 16 21:41:38 hermes kernel: i915 display info: display version: 9
May 16 21:41:38 hermes kernel: i915 display info: cursor_needs_physical: no
May 16 21:41:38 hermes kernel: i915 display info: has_cdclk_crawl: no
May 16 21:41:38 hermes kernel: i915 display info: has_cdclk_squash: no
May 16 21:41:38 hermes kernel: i915 display info: has_ddi: yes
May 16 21:41:38 hermes kernel: i915 display info: has_dp_mst: yes
May 16 21:41:38 hermes kernel: i915 display info: has_dsb: no
May 16 21:41:38 hermes kernel: i915 display info: has_fpga_dbg: yes
May 16 21:41:38 hermes kernel: i915 display info: has_gmch: no
May 16 21:41:38 hermes kernel: i915 display info: has_hotplug: yes
May 16 21:41:38 hermes kernel: i915 display info: has_hti: no
May 16 21:41:38 hermes kernel: i915 display info: has_ipc: yes
May 16 21:41:38 hermes kernel: i915 display info: has_overlay: no
May 16 21:41:38 hermes kernel: i915 display info: has_psr: yes
May 16 21:41:38 hermes kernel: i915 display info: has_psr_hw_tracking: yes
May 16 21:41:38 hermes kernel: i915 display info: overlay_needs_physical: no
May 16 21:41:38 hermes kernel: i915 display info: supports_tv: no
May 16 21:41:38 hermes kernel: i915 display info: has_hdcp: yes
May 16 21:41:38 hermes kernel: i915 display info: has_dmc: yes
May 16 21:41:38 hermes kernel: i915 display info: has_dsc: no
May 16 21:41:38 hermes kernel: Registered IR keymap rc-cec
May 16 21:41:38 hermes kernel: rc rc0: DP-4 as /devices/pci0000:00/0000:00:02.0/rc/rc0
May 16 21:41:38 hermes kernel: input: DP-4 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input10
May 16 21:41:38 hermes kernel: fbcon: i915drmfb (fb0) is primary device
May 16 21:41:38 hermes kernel: fbcon: Deferring console take-over
May 16 21:41:38 hermes kernel: i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
May 16 21:41:38 hermes kernel: fbcon: Taking over console
May 16 21:41:38 hermes kernel: EXT4-fs (nvme0n1p2): mounted filesystem a88ffea0-6e6c-4138-82c1-e1575b189989 r/w with ordered data mode. Quota mode: none.
May 16 21:41:38 hermes kernel: Console: switching to colour frame buffer device 240x67
May 16 21:41:38 hermes systemd[1]: systemd 255.6-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
May 16 21:41:38 hermes systemd[1]: Detected architecture x86-64.
May 16 21:41:38 hermes systemd[1]: Hostname set to <hermes>.
May 16 21:41:38 hermes systemd[1]: bpf-lsm: LSM BPF program attached
May 16 21:41:38 hermes systemd[1]: Queued start job for default target Graphical Interface.
May 16 21:41:38 hermes systemd[1]: Created slice Slice /system/dirmngr.
May 16 21:41:38 hermes systemd[1]: Created slice Slice /system/getty.
May 16 21:41:38 hermes systemd[1]: Created slice Slice /system/gpg-agent.
May 16 21:41:38 hermes systemd[1]: Created slice Slice /system/gpg-agent-browser.
May 16 21:41:38 hermes systemd[1]: Created slice Slice /system/gpg-agent-extra.
May 16 21:41:38 hermes systemd[1]: Created slice Slice /system/gpg-agent-ssh.
May 16 21:41:38 hermes systemd[1]: Created slice Slice /system/keyboxd.
May 16 21:41:38 hermes systemd[1]: Created slice Slice /system/modprobe.
May 16 21:41:38 hermes systemd[1]: Created slice Slice /system/systemd-fsck.
May 16 21:41:38 hermes systemd[1]: Created slice User and Session Slice.
May 16 21:41:38 hermes systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
May 16 21:41:38 hermes systemd[1]: Started Forward Password Requests to Wall Directory Watch.
May 16 21:41:38 hermes systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
May 16 21:41:38 hermes systemd[1]: Expecting device /dev/nvme0n1p1...
May 16 21:41:38 hermes systemd[1]: Expecting device /dev/sda1...
May 16 21:41:38 hermes systemd[1]: Expecting device /dev/sda2...
May 16 21:41:38 hermes systemd[1]: Expecting device /dev/sda3...
May 16 21:41:38 hermes systemd[1]: Expecting device /dev/sda4...
May 16 21:41:38 hermes systemd[1]: Reached target Local Encrypted Volumes.
May 16 21:41:38 hermes systemd[1]: Reached target Local Integrity Protected Volumes.
May 16 21:41:38 hermes systemd[1]: Reached target Path Units.
May 16 21:41:38 hermes systemd[1]: Reached target Remote File Systems.
May 16 21:41:38 hermes systemd[1]: Reached target Slice Units.
May 16 21:41:38 hermes systemd[1]: Reached target Local Verity Protected Volumes.
May 16 21:41:38 hermes systemd[1]: Listening on Device-mapper event daemon FIFOs.
May 16 21:41:38 hermes systemd[1]: Listening on Process Core Dump Socket.
May 16 21:41:38 hermes systemd[1]: Listening on Journal Socket (/dev/log).
May 16 21:41:38 hermes systemd[1]: Listening on Journal Socket.
May 16 21:41:38 hermes systemd[1]: Listening on Network Service Netlink Socket.
May 16 21:41:38 hermes systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
May 16 21:41:38 hermes systemd[1]: Listening on udev Control Socket.
May 16 21:41:38 hermes systemd[1]: Listening on udev Kernel Socket.
May 16 21:41:38 hermes systemd[1]: Listening on User Database Manager Socket.
May 16 21:41:38 hermes systemd[1]: Mounting Huge Pages File System...
May 16 21:41:38 hermes systemd[1]: Mounting POSIX Message Queue File System...
May 16 21:41:38 hermes systemd[1]: Mounting Kernel Debug File System...
May 16 21:41:38 hermes systemd[1]: Mounting Kernel Trace File System...
May 16 21:41:38 hermes systemd[1]: Starting Create List of Static Device Nodes...
May 16 21:41:38 hermes systemd[1]: Starting Load Kernel Module configfs...
May 16 21:41:38 hermes systemd[1]: Starting Load Kernel Module dm_mod...
May 16 21:41:38 hermes systemd[1]: Starting Load Kernel Module drm...
May 16 21:41:38 hermes systemd[1]: Starting Load Kernel Module fuse...
May 16 21:41:38 hermes systemd[1]: Starting Load Kernel Module loop...
May 16 21:41:38 hermes systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
May 16 21:41:38 hermes systemd[1]: Starting Journal Service...
May 16 21:41:38 hermes systemd[1]: Starting Load Kernel Modules...
May 16 21:41:38 hermes systemd[1]: Starting Generate network units from Kernel command line...
May 16 21:41:38 hermes systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
May 16 21:41:38 hermes systemd[1]: Starting Remount Root and Kernel File Systems...
May 16 21:41:38 hermes systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
May 16 21:41:38 hermes systemd[1]: Starting Coldplug All udev Devices...
May 16 21:41:38 hermes systemd[1]: Mounted Huge Pages File System.
May 16 21:41:38 hermes systemd[1]: Mounted POSIX Message Queue File System.
May 16 21:41:38 hermes systemd[1]: Mounted Kernel Debug File System.
May 16 21:41:38 hermes systemd[1]: Mounted Kernel Trace File System.
May 16 21:41:38 hermes systemd[1]: Finished Create List of Static Device Nodes.
May 16 21:41:38 hermes systemd[1]: modprobe@configfs.service: Deactivated successfully.
May 16 21:41:38 hermes systemd[1]: Finished Load Kernel Module configfs.
May 16 21:41:38 hermes systemd[1]: modprobe@drm.service: Deactivated successfully.
May 16 21:41:38 hermes systemd[1]: Finished Load Kernel Module drm.
May 16 21:41:38 hermes kernel: loop: module loaded
May 16 21:41:38 hermes systemd[1]: modprobe@fuse.service: Deactivated successfully.
May 16 21:41:38 hermes systemd[1]: Finished Load Kernel Module fuse.
May 16 21:41:38 hermes systemd[1]: modprobe@loop.service: Deactivated successfully.
May 16 21:41:38 hermes systemd[1]: Finished Load Kernel Module loop.
May 16 21:41:38 hermes systemd[1]: Mounting FUSE Control File System...
May 16 21:41:38 hermes systemd[1]: Mounting Kernel Configuration File System...
May 16 21:41:38 hermes systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
May 16 21:41:38 hermes systemd[1]: Finished Generate network units from Kernel command line.
May 16 21:41:38 hermes systemd[1]: Mounted Kernel Configuration File System.
May 16 21:41:38 hermes systemd[1]: Mounted FUSE Control File System.
May 16 21:41:38 hermes kernel: Asymmetric key parser 'pkcs8' registered
May 16 21:41:38 hermes kernel: device-mapper: uevent: version 1.0.3
May 16 21:41:38 hermes kernel: device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
May 16 21:41:38 hermes systemd[1]: Finished Load Kernel Modules.
May 16 21:41:38 hermes systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
May 16 21:41:38 hermes systemd[1]: Finished Load Kernel Module dm_mod.
May 16 21:41:38 hermes systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
May 16 21:41:38 hermes systemd[1]: Starting Apply Kernel Variables...
May 16 21:41:38 hermes systemd-journald[339]: Collecting audit messages is disabled.
May 16 21:41:38 hermes systemd[1]: Starting User Database Manager...
May 16 21:41:38 hermes systemd[1]: Finished Apply Kernel Variables.
May 16 21:41:38 hermes systemd-journald[339]: Journal started
May 16 21:41:38 hermes systemd-journald[339]: Runtime Journal (/run/log/journal/113047646feb4cdaacf1a8ff22cd6ae4) is 8.0M, max 1.5G, 1.5G free.
May 16 21:41:38 hermes systemd-modules-load[340]: Inserted module 'pkcs8_key_parser'
May 16 21:41:38 hermes systemd[1]: Started Journal Service.
May 16 21:41:38 hermes systemd[1]: Finished Remount Root and Kernel File Systems.
May 16 21:41:38 hermes kernel: EXT4-fs (nvme0n1p2): re-mounted a88ffea0-6e6c-4138-82c1-e1575b189989 r/w. Quota mode: none.
May 16 21:41:38 hermes systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
May 16 21:41:38 hermes systemd[1]: Starting Flush Journal to Persistent Storage...
May 16 21:41:38 hermes systemd[1]: Starting Load/Save OS Random Seed...
May 16 21:41:38 hermes systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
May 16 21:41:38 hermes systemd[1]: Started User Database Manager.
May 16 21:41:38 hermes systemd-journald[339]: Time spent on flushing to /var/log/journal/113047646feb4cdaacf1a8ff22cd6ae4 is 50.299ms for 964 entries.
May 16 21:41:38 hermes systemd-journald[339]: System Journal (/var/log/journal/113047646feb4cdaacf1a8ff22cd6ae4) is 429.1M, max 4.0G, 3.5G free.
May 16 21:41:38 hermes systemd-journald[339]: Received client request to flush runtime journal.
May 16 21:41:38 hermes systemd-journald[339]: /var/log/journal/113047646feb4cdaacf1a8ff22cd6ae4/system.journal: Journal file uses a different sequence number ID, rotating.
May 16 21:41:38 hermes systemd-journald[339]: Rotating system journal.
May 16 21:41:38 hermes systemd[1]: Finished Load/Save OS Random Seed.
May 16 21:41:38 hermes systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
May 16 21:41:38 hermes systemd[1]: Starting Create System Users...
May 16 21:41:38 hermes systemd[1]: Finished Create System Users.
May 16 21:41:38 hermes systemd[1]: Starting Create Static Device Nodes in /dev...
May 16 21:41:38 hermes systemd[1]: Finished Create Static Device Nodes in /dev.
May 16 21:41:38 hermes systemd[1]: Reached target Preparation for Local File Systems.
May 16 21:41:38 hermes systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of an unmet condition check (ConditionPathExists=/var/lib/machines.raw).
May 16 21:41:38 hermes systemd[1]: Starting Rule-based Manager for Device Events and Files...
May 16 21:41:38 hermes systemd[1]: Finished Flush Journal to Persistent Storage.
May 16 21:41:38 hermes systemd-udevd[385]: Using default interface naming scheme 'v255'.
May 16 21:41:38 hermes systemd[1]: Started Rule-based Manager for Device Events and Files.
May 16 21:41:38 hermes (udev-worker)[396]: nvidia_modeset: Process '/usr/bin/bash -c '/usr/bin/mknod -Z -m 666 /dev/nvidia-modeset c $(grep nvidia /proc/devices | cut -d \  -f 1) 254'' failed with exit code 1.
May 16 21:41:38 hermes (udev-worker)[391]: nvidia: Process '/usr/bin/bash -c '/usr/bin/mknod -Z -m 666 /dev/nvidiactl c $(grep nvidia /proc/devices | cut -d \  -f 1) 255'' failed with exit code 1.
May 16 21:41:38 hermes (udev-worker)[391]: nvidia: Process '/usr/bin/bash -c 'for i in $(cat /proc/driver/nvidia/gpus/*/information | grep Minor | cut -d \  -f 4); do /usr/bin/mknod -Z -m 666 /dev/nvidia${i} c $(grep nvidia /proc/devices | cut -d \  -f 1) ${i}; done'' failed with exit code 1.
May 16 21:41:38 hermes systemd[1]: Finished Coldplug All udev Devices.
May 16 21:41:38 hermes (udev-worker)[455]: nvidia: Process '/usr/bin/bash -c '/usr/bin/mknod -Z -m 666 /dev/nvidiactl c $(grep nvidia /proc/devices | cut -d \  -f 1) 255'' failed with exit code 1.
May 16 21:41:38 hermes (udev-worker)[455]: nvidia: Process '/usr/bin/bash -c 'for i in $(cat /proc/driver/nvidia/gpus/*/information | grep Minor | cut -d \  -f 4); do /usr/bin/mknod -Z -m 666 /dev/nvidia${i} c $(grep nvidia /proc/devices | cut -d \  -f 1) ${i}; done'' failed with exit code 1.
May 16 21:41:38 hermes kernel: mousedev: PS/2 mouse device common for all mice
May 16 21:41:38 hermes kernel: intel_pmc_core INT33A1:00:  initialized
May 16 21:41:38 hermes kernel: EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
May 16 21:41:38 hermes kernel: pps_core: LinuxPPS API ver. 1 registered
May 16 21:41:38 hermes kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
May 16 21:41:38 hermes systemd[1]: Found device KXG60PNV512G NVMe TOSHIBA 512GB efi.
May 16 21:41:38 hermes kernel: PTP clock support registered
May 16 21:41:38 hermes kernel: input: PC Speaker as /devices/platform/pcspkr/input/input11
May 16 21:41:38 hermes kernel: i801_smbus 0000:00:1f.4: SPD Write Disable is set
May 16 21:41:38 hermes kernel: i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
May 16 21:41:38 hermes kernel: intel-lpss 0000:00:15.0: enabling device (0100 -> 0102)
May 16 21:41:38 hermes kernel: mei_me 0000:00:16.0: enabling device (0000 -> 0002)
May 16 21:41:38 hermes kernel: idma64 idma64.0: Found Intel integrated DMA 64-bit
May 16 21:41:38 hermes systemd[1]: Found device WDC_WD40EZAZ-00SF3B0 shared.
May 16 21:41:38 hermes systemd[1]: Found device WDC_WD40EZAZ-00SF3B0 media.
May 16 21:41:38 hermes systemd[1]: Found device WDC_WD40EZAZ-00SF3B0 swap.
May 16 21:41:38 hermes systemd[1]: Found device WDC_WD40EZAZ-00SF3B0 snapshots.
May 16 21:41:38 hermes kernel: i2c i2c-10: 2/4 memory slots populated (from DMI)
May 16 21:41:38 hermes kernel: i2c i2c-10: Successfully instantiated SPD at 0x51
May 16 21:41:38 hermes kernel: i2c i2c-10: Successfully instantiated SPD at 0x53
May 16 21:41:38 hermes kernel: input: Dell AIO WMI hotkeys as /devices/virtual/input/input12
May 16 21:41:38 hermes kernel: dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
May 16 21:41:38 hermes systemd[1]: Activating swap /dev/sda4...
May 16 21:41:38 hermes systemd[1]: Mounting /shared...
May 16 21:41:38 hermes kernel: mc: Linux media interface: v0.10
May 16 21:41:38 hermes kernel: Creating 1 MTD partitions on "0000:00:1f.5":
May 16 21:41:38 hermes kernel: 0x000000000000-0x000002000000 : "BIOS"
May 16 21:41:38 hermes kernel: e1000e: Intel(R) PRO/1000 Network Driver
May 16 21:41:38 hermes kernel: e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
May 16 21:41:38 hermes kernel: e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
May 16 21:41:38 hermes systemd[1]: Starting File System Check on /dev/nvme0n1p1...
May 16 21:41:38 hermes systemd[1]: Starting File System Check on /dev/sda2...
May 16 21:41:38 hermes systemd[1]: Starting File System Check on /dev/sda3...
May 16 21:41:38 hermes kernel: Adding 37748732k swap on /dev/sda4.  Priority:-2 extents:1 across:37748732k 
May 16 21:41:38 hermes systemd[1]: Activated swap /dev/sda4.
May 16 21:41:38 hermes systemd[1]: Reached target Swaps.
May 16 21:41:38 hermes systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
May 16 21:41:38 hermes systemd[1]: Mounting Temporary Directory /tmp...
May 16 21:41:38 hermes kernel: iTCO_vendor_support: vendor-support=0
May 16 21:41:38 hermes systemd[1]: Starting Virtual Console Setup...
May 16 21:41:38 hermes kernel: mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
May 16 21:41:38 hermes kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
May 16 21:41:38 hermes kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
May 16 21:41:38 hermes kernel: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
May 16 21:41:38 hermes kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
May 16 21:41:38 hermes kernel: cfg80211: failed to load regulatory.db
May 16 21:41:38 hermes kernel: ee1004 10-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
May 16 21:41:38 hermes kernel: ee1004 10-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
May 16 21:41:38 hermes kernel: input: Dell WMI hotkeys as /devices/platform/PNP0C14:04/wmi_bus/wmi_bus-PNP0C14:04/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input13
May 16 21:41:38 hermes systemd[1]: Mounted Temporary Directory /tmp.
May 16 21:41:38 hermes kernel: iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
May 16 21:41:38 hermes kernel: iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
May 16 21:41:38 hermes systemd-fsck[503]: fsck.fat 4.2 (2021-01-31)
May 16 21:41:38 hermes systemd-fsck[503]: /dev/nvme0n1p1: 191 files, 7384/261628 clusters
May 16 21:41:38 hermes kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
May 16 21:41:38 hermes kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
May 16 21:41:38 hermes kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
May 16 21:41:38 hermes kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
May 16 21:41:38 hermes kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
May 16 21:41:38 hermes systemd[1]: Finished File System Check on /dev/nvme0n1p1.
May 16 21:41:38 hermes systemd[1]: Mounting /efi...
May 16 21:41:38 hermes kernel: exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
May 16 21:41:38 hermes kernel: cryptd: max_cpu_qlen set to 1000
May 16 21:41:38 hermes kernel: i8042: PNP: No PS/2 controller found.
May 16 21:41:38 hermes kernel: Intel(R) Wireless WiFi driver for Linux
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: enabling device (0100 -> 0102)
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000
May 16 21:41:38 hermes kernel: snd_hda_intel 0000:00:1f.3: enabling device (0100 -> 0102)
May 16 21:41:38 hermes kernel: snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
May 16 21:41:38 hermes kernel: snd_hda_intel 0000:01:00.1: enabling device (0100 -> 0102)
May 16 21:41:38 hermes kernel: snd_hda_intel 0000:01:00.1: Disabling MSI
May 16 21:41:38 hermes kernel: snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
May 16 21:41:38 hermes kernel: usb 1-2: Warning! Unlikely big volume range (=496), cval->res is probably wrong.
May 16 21:41:38 hermes kernel: usb 1-2: [50] FU [Mic Capture Volume] ch = 1, val = 0/7936/16
May 16 21:41:38 hermes kernel: usbcore: registered new interface driver snd-usb-audio
May 16 21:41:38 hermes systemd[1]: Finished Virtual Console Setup.
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: loaded firmware version 86.fb5c9aeb.0 ty-a0-gf-a0-86.ucode op_mode iwlmvm
May 16 21:41:38 hermes kernel: AVX2 version of gcm_enc/dec engaged.
May 16 21:41:38 hermes kernel: AES CTR mode by8 optimization enabled
May 16 21:41:38 hermes systemd[1]: Reached target Sound Card.
May 16 21:41:38 hermes systemd[1]: Mounted /efi.
May 16 21:41:38 hermes systemd-fsck[505]: /dev/sda2: clean, 103682/67108864 files, 19338397/268435456 blocks
May 16 21:41:38 hermes kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
May 16 21:41:38 hermes kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
May 16 21:41:38 hermes kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
May 16 21:41:38 hermes kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
May 16 21:41:38 hermes systemd[1]: Finished File System Check on /dev/sda2.
May 16 21:41:38 hermes kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
May 16 21:41:38 hermes kernel: snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
May 16 21:41:38 hermes kernel: snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
May 16 21:41:38 hermes kernel: snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
May 16 21:41:38 hermes kernel: snd_hda_codec_realtek hdaudioC1D0:    inputs:
May 16 21:41:38 hermes kernel: snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x19
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420
May 16 21:41:38 hermes kernel: thermal thermal_zone2: failed to read out thermal zone (-61)
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: WRT: Invalid buffer destination
May 16 21:41:38 hermes kernel: input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card1/input18
May 16 21:41:38 hermes kernel: input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card1/input19
May 16 21:41:38 hermes kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input20
May 16 21:41:38 hermes kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input21
May 16 21:41:38 hermes kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input22
May 16 21:41:38 hermes systemd-fsck[543]: /dev/sda3: clean, 1427091/67108864 files, 32712433/268435456 blocks
May 16 21:41:38 hermes kernel: intel_tcc_cooling: Programmable TCC Offset detected
May 16 21:41:38 hermes systemd[1]: Finished File System Check on /dev/sda3.
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: WFPM_AUTH_KEY_0: 0x90
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: loaded PNVM version e28bb9d7
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: Detected RF GF, rfid=0x10d000
May 16 21:41:38 hermes kernel: intel_rapl_common: Found RAPL domain package
May 16 21:41:38 hermes kernel: intel_rapl_common: Found RAPL domain core
May 16 21:41:38 hermes kernel: intel_rapl_common: Found RAPL domain uncore
May 16 21:41:38 hermes kernel: intel_rapl_common: Found RAPL domain dram
May 16 21:41:38 hermes kernel: e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
May 16 21:41:38 hermes systemd[1]: Mounted /shared.
May 16 21:41:38 hermes kernel: iwlwifi 0000:04:00.0: base HW address: f8:b5:4d:d6:f8:71
May 16 21:41:39 hermes kernel: e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d8:9e:f3:96:39:8e
May 16 21:41:39 hermes kernel: e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
May 16 21:41:39 hermes kernel: e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
May 16 21:41:39 hermes kernel: e1000e 0000:00:1f.6 eno1: renamed from eth0
May 16 21:41:39 hermes systemd[1]: Starting Load/Save RF Kill Switch Status...
May 16 21:41:39 hermes systemd[1]: Started Load/Save RF Kill Switch Status.
May 16 21:41:39 hermes systemd[1]: Mounting /.snapshots...
May 16 21:41:39 hermes systemd[1]: Mounting /media...
May 16 21:41:39 hermes kernel: EXT4-fs (sda3): mounted filesystem 25c3d5f9-ce04-4127-a4b2-efdb062ab55b r/w with ordered data mode. Quota mode: none.
May 16 21:41:39 hermes systemd[1]: Mounted /.snapshots.
May 16 21:41:39 hermes kernel: EXT4-fs (sda2): mounted filesystem c5e5bc30-62d1-477e-9c9f-baea117bbd34 r/w with ordered data mode. Quota mode: none.
May 16 21:41:39 hermes systemd[1]: Mounted /media.
May 16 21:41:39 hermes systemd[1]: Reached target Local File Systems.
May 16 21:41:39 hermes systemd[1]: Listening on System Extension Image Management (Varlink).
May 16 21:41:39 hermes systemd[1]: Starting Rebuild Dynamic Linker Cache...
May 16 21:41:39 hermes systemd[1]: Set Up Additional Binary Formats was skipped because no trigger condition checks were met.
May 16 21:41:39 hermes systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met.
May 16 21:41:39 hermes systemd[1]: Starting Create Volatile Files and Directories...
May 16 21:41:39 hermes systemd[1]: Finished Rebuild Dynamic Linker Cache.
May 16 21:41:39 hermes systemd[1]: Finished Create Volatile Files and Directories.
May 16 21:41:39 hermes systemd[1]: First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
May 16 21:41:39 hermes systemd[1]: First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
May 16 21:41:39 hermes systemd[1]: Starting Rebuild Journal Catalog...
May 16 21:41:39 hermes systemd[1]: Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
May 16 21:41:39 hermes systemd[1]: Starting Record System Boot/Shutdown in UTMP...
May 16 21:41:39 hermes systemd[1]: Finished Record System Boot/Shutdown in UTMP.
May 16 21:41:39 hermes systemd[1]: Finished Rebuild Journal Catalog.
May 16 21:41:39 hermes systemd[1]: Starting Update is Completed...
May 16 21:41:39 hermes systemd[1]: Finished Update is Completed.
May 16 21:41:39 hermes systemd[1]: Reached target System Initialization.
May 16 21:41:39 hermes systemd[1]: Started Refresh existing PGP keys of archlinux-keyring regularly.
May 16 21:41:39 hermes systemd[1]: Started Daily man-db regeneration.
May 16 21:41:39 hermes systemd[1]: Started Daily verification of password and group files.
May 16 21:41:39 hermes systemd[1]: Started Daily Cleanup of Temporary Directories.
May 16 21:41:39 hermes systemd[1]: Reached target Timer Units.
May 16 21:41:39 hermes systemd[1]: Listening on D-Bus System Message Bus Socket.
May 16 21:41:39 hermes systemd[1]: Listening on GnuPG network certificate management daemon for /etc/pacman.d/gnupg.
May 16 21:41:39 hermes systemd[1]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers) for /etc/pacman.d/gnupg.
May 16 21:41:39 hermes systemd[1]: Listening on GnuPG cryptographic agent and passphrase cache (restricted) for /etc/pacman.d/gnupg.
May 16 21:41:39 hermes systemd[1]: Listening on GnuPG cryptographic agent (ssh-agent emulation) for /etc/pacman.d/gnupg.
May 16 21:41:39 hermes systemd[1]: Listening on GnuPG cryptographic agent and passphrase cache for /etc/pacman.d/gnupg.
May 16 21:41:39 hermes systemd[1]: Listening on GnuPG public key management service for /etc/pacman.d/gnupg.
May 16 21:41:39 hermes systemd[1]: Reached target Socket Units.
May 16 21:41:39 hermes systemd[1]: Starting D-Bus System Message Bus...
May 16 21:41:39 hermes systemd[1]: TPM2 PCR Barrier (Initialization) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
May 16 21:41:39 hermes systemd[1]: Started D-Bus System Message Bus.
May 16 21:41:39 hermes systemd[1]: Reached target Basic System.
May 16 21:41:39 hermes systemd[1]: Started DHCP/ IPv4LL/ IPv6RA/ DHCPv6 client on all interfaces.
May 16 21:41:39 hermes systemd[1]: Starting Netfilter Tables...
May 16 21:41:39 hermes systemd[1]: SSH Key Generation was skipped because no trigger condition checks were met.
May 16 21:41:39 hermes systemd[1]: Starting User Login Management...
May 16 21:41:39 hermes systemd[1]: TPM2 PCR Barrier (User) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
May 16 21:41:39 hermes systemd[1]: Starting WPA supplicant...
May 16 21:41:39 hermes dbus-broker-launch[584]: Ready
May 16 21:41:39 hermes dhcpcd[586]: dhcpcd-10.0.6 starting
May 16 21:41:39 hermes dhcpcd[591]: dev: loaded udev
May 16 21:41:39 hermes dhcpcd[591]: DUID 00:01:00:01:2d:d3:c7:ec:f8:b5:4d:d6:f8:71
May 16 21:41:39 hermes systemd[1]: Started WPA supplicant.
May 16 21:41:39 hermes wpa_supplicant[589]: Successfully initialized wpa_supplicant
May 16 21:41:40 hermes systemd-logind[588]: New seat seat0.
May 16 21:41:40 hermes systemd-logind[588]: Watching system buttons on /dev/input/event2 (Power Button)
May 16 21:41:40 hermes systemd-logind[588]: Watching system buttons on /dev/input/event1 (Power Button)
May 16 21:41:40 hermes systemd-logind[588]: Watching system buttons on /dev/input/event0 (Sleep Button)
May 16 21:41:40 hermes systemd-logind[588]: Watching system buttons on /dev/input/event10 (DP-4)
May 16 21:41:40 hermes systemd-logind[588]: Watching system buttons on /dev/input/event4 (Cherry GmbH CHERRY Wireless Desktop)
May 16 21:41:40 hermes systemd-logind[588]: Watching system buttons on /dev/input/event7 (Cherry GmbH CHERRY Wireless Desktop Consumer Control)
May 16 21:41:40 hermes systemd-logind[588]: Watching system buttons on /dev/input/event8 (Cherry GmbH CHERRY Wireless Desktop System Control)
May 16 21:41:40 hermes systemd[1]: Started User Login Management.
May 16 21:41:40 hermes kernel: 8021q: 802.1Q VLAN Support v1.8
May 16 21:41:40 hermes dhcpcd[620]: wlan0: starting wpa_supplicant
May 16 21:41:40 hermes dhcpcd-run-hooks[627]: wlan0: starting wpa_supplicant
May 16 21:41:40 hermes kernel: iwlwifi 0000:04:00.0: WRT: Invalid buffer destination
May 16 21:41:40 hermes kernel: iwlwifi 0000:04:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
May 16 21:41:40 hermes kernel: iwlwifi 0000:04:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
May 16 21:41:40 hermes kernel: iwlwifi 0000:04:00.0: WFPM_AUTH_KEY_0: 0x90
May 16 21:41:40 hermes kernel: iwlwifi 0000:04:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
May 16 21:41:40 hermes systemd[1]: nftables.service: Deactivated successfully.
May 16 21:41:40 hermes systemd[1]: Finished Netfilter Tables.
May 16 21:41:40 hermes systemd[1]: Reached target Preparation for Network.
May 16 21:41:40 hermes systemd[1]: Starting Network Configuration...
May 16 21:41:40 hermes kernel: iwlwifi 0000:04:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1
May 16 21:41:40 hermes systemd-networkd[642]: /etc/systemd/network/wlan0.network:2: Interface name is not valid or too long, ignoring assignment: 6140
May 16 21:41:40 hermes systemd-networkd[642]: lo: Link UP
May 16 21:41:40 hermes systemd-networkd[642]: lo: Gained carrier
May 16 21:41:40 hermes systemd-networkd[642]: wlan0: Link UP
May 16 21:41:40 hermes systemd-networkd[642]: Enumeration completed
May 16 21:41:40 hermes systemd[1]: Started Network Configuration.
May 16 21:41:40 hermes systemd-networkd[642]: wlan0: Link DOWN
May 16 21:41:40 hermes systemd-networkd[642]: wlan0: Link UP
May 16 21:41:40 hermes systemd[1]: Reached target Network.
May 16 21:41:40 hermes dhcpcd[591]: no interfaces have a carrier
May 16 21:41:40 hermes dhcpcd[591]: wlan0: waiting for carrier
May 16 21:41:40 hermes systemd[1]: Started OpenSSH Daemon.
May 16 21:41:40 hermes systemd[1]: Starting Permit User Sessions...
May 16 21:41:40 hermes systemd[1]: Starting xrdp session manager...
May 16 21:41:40 hermes (p-sesman)[662]: xrdp-sesman.service: Referenced but unset environment variable evaluates to an empty string: SESMAN_OPTIONS
May 16 21:41:40 hermes systemd[1]: Started xrdp session manager.
May 16 21:41:40 hermes systemd[1]: Starting xrdp daemon...
May 16 21:41:40 hermes systemd[1]: Finished Permit User Sessions.
May 16 21:41:40 hermes xrdp-sesman[662]: [INFO ] starting xrdp-sesman with pid 662
May 16 21:41:40 hermes systemd[1]: Started Getty on tty1.
May 16 21:41:40 hermes systemd[1]: Reached target Login Prompts.
May 16 21:41:40 hermes xrdp-sesman[662]: [INFO ] Sesman now listening on /var/run/xrdp/sesman.socket
May 16 21:41:40 hermes (xrdp)[663]: xrdp.service: Referenced but unset environment variable evaluates to an empty string: XRDP_OPTIONS
May 16 21:41:40 hermes systemd[1]: Started xrdp daemon.
May 16 21:41:40 hermes systemd[1]: Reached target Multi-User System.
May 16 21:41:40 hermes systemd[1]: Reached target Graphical Interface.
May 16 21:41:40 hermes systemd[1]: Startup finished in 6.645s (firmware) + 6.693s (loader) + 4.330s (kernel) + 3.077s (userspace) = 20.746s.
May 16 21:41:40 hermes xrdp[663]: [INFO ] starting xrdp with pid 663
May 16 21:41:40 hermes xrdp[663]: [INFO ] address [0.0.0.0] port [3389] mode 1
May 16 21:41:40 hermes xrdp[663]: [INFO ] listening to port 3389 on 0.0.0.0
May 16 21:41:40 hermes xrdp[663]: [INFO ] xrdp_listen_pp done
May 16 21:41:40 hermes agetty[665]: failed to open credentials directory
May 16 21:41:40 hermes systemd-networkd[642]: eno1: Link UP
May 16 21:41:40 hermes dhcpcd[591]: eno1: waiting for carrier
May 16 21:41:40 hermes sshd[647]: Server listening on 0.0.0.0 port 22.
May 16 21:41:40 hermes sshd[647]: Server listening on :: port 22.
May 16 21:41:43 hermes kernel: wlan0: authenticate with f6:92:bf:95:38:98 (local address=f8:b5:4d:d6:f8:71)
May 16 21:41:43 hermes kernel: wlan0: send auth to f6:92:bf:95:38:98 (try 1/3)
May 16 21:41:43 hermes kernel: wlan0: authenticated
May 16 21:41:43 hermes kernel: wlan0: associate with f6:92:bf:95:38:98 (try 1/3)
May 16 21:41:43 hermes kernel: wlan0: RX AssocResp from f6:92:bf:95:38:98 (capab=0x11 status=0 aid=5)
May 16 21:41:43 hermes kernel: wlan0: associated
May 16 21:41:43 hermes dhcpcd[591]: wlan0: carrier acquired
May 16 21:41:43 hermes systemd-networkd[642]: wlan0: Gained carrier
May 16 21:41:43 hermes dhcpcd[591]: wlan0: connected to Access Point: Haywire 6140 E
May 16 21:41:43 hermes dhcpcd[591]: wlan0: IAID 4d:d6:f8:71
May 16 21:41:43 hermes dhcpcd[591]: wlan0: adding address fe80::52ba:88c0:d183:58a7
May 16 21:41:44 hermes systemd[1]: systemd-rfkill.service: Deactivated successfully.
May 16 21:41:44 hermes dhcpcd[591]: wlan0: soliciting an IPv6 router
May 16 21:41:45 hermes systemd-networkd[642]: wlan0: Gained IPv6LL
May 16 21:41:45 hermes dhcpcd[591]: wlan0: rebinding lease of 192.168.1.19
May 16 21:41:46 hermes dhcpcd[591]: wlan0: leased 192.168.1.19 for 345600 seconds
May 16 21:41:46 hermes dhcpcd[591]: wlan0: adding route to 192.168.1.0/24
May 16 21:41:46 hermes dhcpcd[591]: wlan0: adding default route via 192.168.1.1
May 16 21:41:51 hermes sshd[703]: Connection from 192.168.1.25 port 57048 on 192.168.1.19 port 22 rdomain ""
May 16 21:41:51 hermes sshd[703]: Accepted key RSA SHA256:tPe5CEWeV8tHd4xy8Dfbwko+Pwl2TdhxkNzSWU/7B7o found at /home/remconn/.ssh/authorized_keys:1
May 16 21:41:51 hermes sshd[703]: Postponed publickey for remconn from 192.168.1.25 port 57048 ssh2 [preauth]
May 16 21:41:51 hermes sshd[703]: Accepted key RSA SHA256:tPe5CEWeV8tHd4xy8Dfbwko+Pwl2TdhxkNzSWU/7B7o found at /home/remconn/.ssh/authorized_keys:1
May 16 21:41:51 hermes sshd[703]: Accepted publickey for remconn from 192.168.1.25 port 57048 ssh2: RSA SHA256:tPe5CEWeV8tHd4xy8Dfbwko+Pwl2TdhxkNzSWU/7B7o
May 16 21:41:51 hermes sshd[703]: User child is on pid 705
May 16 21:41:51 hermes sshd[705]: Starting session: shell on pts/0 for remconn from 192.168.1.25 port 57048 id 0
May 16 21:41:51 hermes systemd-journald[339]: /var/log/journal/113047646feb4cdaacf1a8ff22cd6ae4/user-1001.journal: Journal file uses a different sequence number ID, rotating.
May 16 21:41:57 hermes dhcpcd[591]: wlan0: no IPv6 Routers available
May 16 21:42:01 hermes xrdp[663]: [INFO ] Socket 14: connection accepted from [::1]:43612
May 16 21:42:01 hermes xrdp[717]: [INFO ] Using default X.509 certificate: /etc/xrdp/cert.pem
May 16 21:42:01 hermes xrdp[717]: [INFO ] Using default X.509 key file: /etc/xrdp/key.pem
May 16 21:42:01 hermes xrdp[717]: [INFO ] Security protocol: configured [SSL|RDP], requested [SSL|HYBRID|HYBRID_EX|RDP], selected [SSL]
May 16 21:42:01 hermes xrdp[717]: [ERROR] SSL_read: Failure in SSL library (protocol error?)
May 16 21:42:01 hermes xrdp[717]: [ERROR] SSL: error:0A000126:SSL routines::unexpected eof while reading
May 16 21:42:01 hermes xrdp[717]: [ERROR] libxrdp_force_read: header read error
May 16 21:42:01 hermes xrdp[717]: [ERROR] Processing [ITU-T T.125] Connect-Initial failed
May 16 21:42:01 hermes xrdp[663]: [INFO ] Socket 14: connection accepted from [::1]:43616
May 16 21:42:01 hermes xrdp[717]: [ERROR] [MCS Connection Sequence] receive connection request failed
May 16 21:42:01 hermes xrdp[717]: [ERROR] xrdp_sec_incoming: xrdp_mcs_incoming failed
May 16 21:42:01 hermes xrdp[720]: [INFO ] Using default X.509 certificate: /etc/xrdp/cert.pem
May 16 21:42:01 hermes xrdp[717]: [ERROR] xrdp_rdp_incoming: xrdp_sec_incoming failed
May 16 21:42:01 hermes xrdp[720]: [INFO ] Using default X.509 key file: /etc/xrdp/key.pem
May 16 21:42:01 hermes xrdp[717]: [ERROR] xrdp_process_main_loop: libxrdp_process_incoming failed
May 16 21:42:01 hermes xrdp[720]: [INFO ] Security protocol: configured [SSL|RDP], requested [SSL|HYBRID|HYBRID_EX|RDP], selected [SSL]
May 16 21:42:01 hermes xrdp[717]: [ERROR] xrdp_iso_send: trans_write_copy_s failed
May 16 21:42:01 hermes xrdp[717]: [ERROR] Sending [ITU T.125] DisconnectProviderUltimatum failed
May 16 21:42:01 hermes xrdp[720]: [INFO ] Connected client computer name: DESKTOP-HFQTGB2
May 16 21:42:01 hermes xrdp[720]: [INFO ] client supports gfx protocol
May 16 21:42:01 hermes xrdp[720]: [WARN ] Received [MS-RDPBCGR] TS_UD_HEADER type 0xc006 is unknown (ignored)
May 16 21:42:01 hermes xrdp[720]: [WARN ] Received [MS-RDPBCGR] TS_UD_HEADER type 0xc00a is unknown (ignored)
May 16 21:42:01 hermes xrdp[720]: [INFO ] xrdp_load_keyboard_layout: Keyboard information sent by the RDP client, keyboard_type:[0x04], keyboard_subtype:[0x00], keylayout:[0x00000409]
May 16 21:42:01 hermes xrdp[720]: [INFO ] xrdp_load_keyboard_layout: model [] variant [] layout [us] options []
May 16 21:42:01 hermes xrdp[720]: [INFO ] TLS connection established from [::1]:43616 TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384
May 16 21:42:01 hermes xrdp[720]: [INFO ] Client supports single-screen resizes by xrdp
May 16 21:42:01 hermes xrdp[720]: [INFO ] xrdp_caps_process_pointer: client supports new(color) cursor
May 16 21:42:01 hermes xrdp[720]: [INFO ] xrdp_process_offscreen_bmpcache: support level 1 cache size 10485760 MB cache entries 100
May 16 21:42:01 hermes xrdp[720]: [INFO ] xrdp_caps_process_codecs: NSCodec(CA8D1BB9-000F-154F-589F-AE2D1A87E2D6), codec id [1], properties len [3]
May 16 21:42:01 hermes xrdp[720]: [INFO ] xrdp_caps_process_codecs: Image RemoteFX(2744CCD4-9D8A-4E74-803C-0ECBEEA19C54), codec id [5], properties len [49]
May 16 21:42:01 hermes xrdp[720]: [INFO ] xrdp_caps_process_codecs: RemoteFX(76772F12-BD72-4463-AFB3-B73C9C6F7886), codec id [3], properties len [49]
May 16 21:42:01 hermes xrdp[720]: [INFO ] Client Capability: LARGE_POINTER_FLAG_96x96 supported
May 16 21:42:01 hermes xrdp[720]: [INFO ] Loading keymap file /etc/xrdp/km-00000409.ini
May 16 21:42:01 hermes xrdp[720]: [WARN ] local keymap file for 0x00000409 found and doesn't match built in keymap, using local keymap file
May 16 21:42:01 hermes xrdp[720]: [INFO ] Login screen monitor height is 1080 pixels over 193 mm (142 DPI)
May 16 21:42:01 hermes xrdp[720]: [INFO ] xrdp_egfx_create: error 0 channel_id 1
May 16 21:42:03 hermes xrdp[720]: [INFO ] xrdp_mm_egfx_caps_advertise:
May 16 21:42:03 hermes xrdp[720]: [INFO ]   version 0x00080004 flags 0x00000000 (index: 0)
May 16 21:42:03 hermes xrdp[720]: [INFO ]   version 0x00080105 flags 0x00000000 (index: 1)
May 16 21:42:03 hermes xrdp[720]: [INFO ]   version 0x000a0002 flags 0x00000000 (index: 2)
May 16 21:42:03 hermes xrdp[720]: [INFO ]   version 0x000a0200 flags 0x00000000 (index: 3)
May 16 21:42:03 hermes xrdp[720]: [INFO ]   version 0x000a0301 flags 0x00000000 (index: 4)
May 16 21:42:03 hermes xrdp[720]: [INFO ]   version 0x000a0400 flags 0x00000000 (index: 5)
May 16 21:42:03 hermes xrdp[720]: [INFO ]   version 0x000a0502 flags 0x00000000 (index: 6)
May 16 21:42:03 hermes xrdp[720]: [INFO ]   version 0x000a0600 flags 0x00000000 (index: 7)
May 16 21:42:03 hermes xrdp[720]: [INFO ]   replying version 0x000a0600 flags 0x00000000
May 16 21:42:03 hermes xrdp[720]: [INFO ] xrdp_mm_egfx_caps_advertise: xrdp_egfx_send_capsconfirm error 0 best_index 7
May 16 21:42:03 hermes xrdp[720]: [INFO ] xrdp_egfx_reset_graphics:
May 16 21:42:03 hermes xrdp[720]: [INFO ] xrdp_egfx_reset_graphics: width 1920 height 1080 monitorcount 1
May 16 21:42:03 hermes xrdp[720]: [INFO ] xrdp_mm_egfx_caps_advertise: xrdp_egfx_send_reset_graphics error 0 monitorCount 0
May 16 21:42:03 hermes xrdp[720]: [INFO ] xrdp_mm_egfx_create_surfaces: map surface_id 0 left 0 top 0 width 1920 height 1080
May 16 21:42:03 hermes xrdp[720]: [INFO ] xrdp_encoder_create: starting gfx rfx pro codec session
May 16 21:42:03 hermes xrdp[720]: [INFO ] xrdp_mm_egfx_invalidate_wm_screen:
May 16 21:42:03 hermes xrdp[720]: [INFO ] xrdp_mm_egfx_caps_advertise: egfx created.
May 16 21:42:12 hermes xrdp[720]: [WARN ] Ignoring obsolete SCP port value '3350'
May 16 21:42:12 hermes xrdp[720]: [INFO ] xrdp_wm_log_msg: sesman connect ok
May 16 21:42:12 hermes xrdp-sesman[662]: [INFO ] Socket 13: connection accepted from AF_UNIX
May 16 21:42:12 hermes xrdp[720]: [INFO ] xrdp_wm_log_msg: Performing login request for amy
May 16 21:42:12 hermes xrdp-sesman[662]: [INFO ] Received system login request from xrdp for user: amy IP: ::1
May 16 21:42:12 hermes xrdp-sesexec[724]: [INFO ] starting xrdp-sesexec with pid 724
May 16 21:42:12 hermes dbus-broker-launch[584]: Activation request for 'org.freedesktop.home1' failed: The systemd unit 'dbus-org.freedesktop.home1.service' could not be found.
May 16 21:42:12 hermes xrdp-sesexec[724]: [INFO ] TerminalServerUsers group tsusers doesn't exist. Access granted for amy
May 16 21:42:12 hermes xrdp-sesexec[724]: [INFO ] Access permitted for user: amy
May 16 21:42:12 hermes xrdp[720]: [INFO ] xrdp_wm_log_msg: login was successful - creating session
May 16 21:42:12 hermes xrdp-sesman[662]: [INFO ] Received sys login status for amy : logged in
May 16 21:42:12 hermes xrdp-sesman[662]: [INFO ] Received request from xrdp to create a session for user amy
May 16 21:42:12 hermes xrdp-sesexec[724]: pam_unix(xrdp-sesman:session): session opened for user amy(uid=1000) by amy(uid=0)
May 16 21:42:12 hermes systemd-logind[588]: New session 1 of user amy.
May 16 21:42:12 hermes systemd[1]: Created slice User Slice of UID 1000.
May 16 21:42:12 hermes systemd[1]: Starting User Runtime Directory /run/user/1000...
May 16 21:42:12 hermes systemd[1]: Finished User Runtime Directory /run/user/1000.
May 16 21:42:12 hermes systemd[1]: Starting User Manager for UID 1000...
May 16 21:42:12 hermes (systemd)[731]: pam_warn(systemd-user:setcred): function=[pam_sm_setcred] flags=0x8002 service=[systemd-user] terminal=[] user=[amy] ruser=[<unknown>] rhost=[<unknown>]
May 16 21:42:12 hermes (systemd)[731]: pam_unix(systemd-user:session): session opened for user amy(uid=1000) by amy(uid=0)
May 16 21:42:12 hermes systemd-xdg-autostart-generator[737]: Exec binary 'kclockd' does not exist: No such file or directory
May 16 21:42:12 hermes systemd-xdg-autostart-generator[737]: /home/amy/.config/autostart/org.kde.kclockd-autostart.desktop: not generating unit, executable specified in Exec= does not exist.
May 16 21:42:13 hermes systemd[731]: Queued start job for default target Main User Target.
May 16 21:42:13 hermes systemd[731]: Created slice User Application Slice.
May 16 21:42:13 hermes systemd[731]: Reached target Paths.
May 16 21:42:13 hermes systemd[731]: Reached target Timers.
May 16 21:42:13 hermes systemd[731]: Starting D-Bus User Message Bus Socket...
May 16 21:42:13 hermes systemd[731]: Listening on GnuPG network certificate management daemon.
May 16 21:42:13 hermes systemd[731]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
May 16 21:42:13 hermes systemd[731]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
May 16 21:42:13 hermes systemd[731]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
May 16 21:42:13 hermes systemd[731]: Listening on GnuPG cryptographic agent and passphrase cache.
May 16 21:42:13 hermes systemd[731]: Listening on GnuPG public key management service.
May 16 21:42:13 hermes systemd[731]: Listening on p11-kit server.
May 16 21:42:13 hermes systemd[731]: Listening on D-Bus User Message Bus Socket.
May 16 21:42:13 hermes systemd[731]: Reached target Sockets.
May 16 21:42:13 hermes systemd[731]: Reached target Basic System.
May 16 21:42:13 hermes systemd[731]: Reached target Main User Target.
May 16 21:42:13 hermes systemd[731]: Startup finished in 151ms.
May 16 21:42:13 hermes systemd[1]: Started User Manager for UID 1000.
May 16 21:42:13 hermes systemd[1]: Started Session 1 of User amy.
May 16 21:42:13 hermes xrdp-sesexec[740]: [INFO ] Starting X server on display 10: /usr/lib/Xorg :10 -auth .Xauthority -config xrdp/xorg_nvidia.conf -noreset -nolisten tcp -logfile .xorgxrdp.%s.log
May 16 21:42:13 hermes xrdp-sesman[740]: X.Org X Server 1.21.1.13
May 16 21:42:13 hermes xrdp-sesman[740]: X Protocol Version 11, Revision 0
May 16 21:42:13 hermes xrdp-sesman[740]: Current Operating System: Linux hermes 6.8.9-arch1-2 #1 SMP PREEMPT_DYNAMIC Tue, 07 May 2024 21:35:54 +0000 x86_64
May 16 21:42:13 hermes xrdp-sesman[740]: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a88ffea0-6e6c-4138-82c1-e1575b189989 rw loglevel=3 quiet
May 16 21:42:13 hermes xrdp-sesman[740]:  
May 16 21:42:13 hermes xrdp-sesman[740]: Current version of pixman: 0.43.4
May 16 21:42:13 hermes xrdp-sesman[740]:         Before reporting problems, check [url]http://wiki.x.org[/url]
May 16 21:42:13 hermes xrdp-sesman[740]:         to make sure that you have the latest version.
May 16 21:42:13 hermes xrdp-sesman[740]: Markers: (--) probed, (**) from config file, (==) default setting,
May 16 21:42:13 hermes xrdp-sesman[740]:         (++) from command line, (!!) notice, (II) informational,
May 16 21:42:13 hermes xrdp-sesman[740]:         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
May 16 21:42:13 hermes xrdp-sesman[740]: (++) Log file: ".xorgxrdp.10.log", Time: Thu May 16 21:42:13 2024
May 16 21:42:13 hermes xrdp-sesman[740]: (++) Using config file: "/etc/X11/xrdp/xorg_nvidia.conf"
May 16 21:42:13 hermes xrdp-sesman[740]: (==) Using system config directory "/usr/share/X11/xorg.conf.d"
May 16 21:42:13 hermes xrdp-sesman[740]: xorgxrdpSetup:
May 16 21:42:13 hermes xrdp-sesman[740]: rdpmousePlug:
May 16 21:42:13 hermes xrdp-sesman[740]: rdpkeybPlug:
May 16 21:42:13 hermes xrdp-sesman[740]: xorgxrdpCheckWrap: NVIDIA driver found
May 16 21:42:13 hermes xrdp-sesman[740]: xorgxrdpDriverFunc:
May 16 21:42:13 hermes xrdp-sesman[740]: xorgxrdpPciProbe:
May 16 21:42:13 hermes xrdp-sesman[740]: xorgxrdpPciProbe:
May 16 21:42:13 hermes xrdp-sesman[740]: (EE)
May 16 21:42:13 hermes xrdp-sesman[740]: Fatal server error:
May 16 21:42:13 hermes xrdp-sesman[740]: (EE) no screens found(EE)
May 16 21:42:13 hermes xrdp-sesman[740]: (EE)
May 16 21:42:13 hermes xrdp-sesman[740]: Please consult the The X.Org Foundation support
May 16 21:42:13 hermes xrdp-sesman[740]:          at [url]http://wiki.x.org[/url]
May 16 21:42:13 hermes xrdp-sesman[740]:  for help.
May 16 21:42:13 hermes xrdp-sesman[740]: (EE) Please also check the log file at ".xorgxrdp.10.log" for additional information.
May 16 21:42:13 hermes xrdp-sesman[740]: (EE)
May 16 21:42:13 hermes xrdp-sesman[740]: (EE) Server terminated with error (1). Closing log file.
May 16 21:42:23 hermes xrdp-sesexec[724]: [ERROR] waitforx: Unable to open display :10
May 16 21:42:23 hermes xrdp-sesexec[724]: [ERROR] X server failed to start
May 16 21:42:23 hermes xrdp[720]: [INFO ] xrdp_wm_log_msg: Can't create session for user amy - X server could not be started
May 16 21:42:23 hermes xrdp-sesman[662]: [INFO ] Session on display 10 has finished.
May 16 21:42:23 hermes xrdp-sesexec[724]: pam_unix(xrdp-sesman:session): session closed for user amy
May 16 21:42:23 hermes systemd[1]: session-1.scope: Deactivated successfully.
May 16 21:42:23 hermes systemd-logind[588]: Session 1 logged out. Waiting for processes to exit.
May 16 21:42:23 hermes systemd-logind[588]: Removed session 1.
May 16 21:42:25 hermes login[665]: pam_unix(login:session): session opened for user amy(uid=1000) by amy(uid=0)
May 16 21:42:25 hermes systemd-logind[588]: New session 3 of user amy.
May 16 21:42:25 hermes systemd[1]: Started Session 3 of User amy.
May 16 21:42:25 hermes login[665]: LOGIN ON tty1 BY amy
May 16 21:43:01 hermes unix_chkpwd[757]: password check failed for user (amy)
May 16 21:43:01 hermes sudo[755]: pam_unix(sudo:auth): authentication failure; logname=amy uid=1000 euid=0 tty=/dev/tty1 ruser=amy rhost=  user=amy
May 16 21:43:15 hermes sudo[761]:      amy : TTY=tty1 ; PWD=/home/amy ; USER=root ; TSID=0000BI ; COMMAND=/usr/bin/journalctl
May 16 21:43:15 hermes sudo[761]: pam_unix(sudo:session): session opened for user root(uid=0) by amy(uid=1000)
May 16 21:43:20 hermes sudo[761]: pam_unix(sudo:session): session closed for user root
May 16 21:43:26 hermes sudo[765]:      amy : TTY=tty1 ; PWD=/home/amy ; USER=root ; TSID=0000BJ ; COMMAND=/usr/bin/journalctl --boot
May 16 21:43:26 hermes sudo[765]: pam_unix(sudo:session): session opened for user root(uid=0) by amy(uid=1000)

xorgxrdp.10.log

[    40.125] 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[    40.125] Current Operating System: Linux hermes 6.8.9-arch1-2 #1 SMP PREEMPT_DYNAMIC Tue, 07 May 2024 21:35:54 +0000 x86_64
[    40.125] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a88ffea0-6e6c-4138-82c1-e1575b189989 rw loglevel=3 quiet
[    40.125]  
[    40.125] Current version of pixman: 0.43.4
[    40.125] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    40.125] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    40.125] (++) Log file: ".xorgxrdp.10.log", Time: Thu May 16 21:42:13 2024
[    40.126] (++) Using config file: "/etc/X11/xrdp/xorg_nvidia.conf"
[    40.126] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    40.126] (**) Option "defaultserverlayout" "XRDP GPU Server"
[    40.126] (**) ServerLayout "XRDP GPU Server"
[    40.126] (**) |-->Screen "dGPU" (0)
[    40.126] (**) |   |-->Monitor "<default monitor>"
[    40.127] (**) |   |-->Device "dGPU"
[    40.127] (==) No monitor specified for screen "dGPU".
	Using a default monitor configuration.
[    40.127] (**) |-->Input Device "xrdpMouse"
[    40.127] (**) |-->Input Device "xrdpKeyboard"
[    40.127] (**) Option "DontVTSwitch" "on"
[    40.127] (**) Option "AutoAddDevices" "off"
[    40.127] (**) Allowing byte-swapped clients
[    40.127] (**) Not automatically adding devices
[    40.127] (==) Automatically enabling devices
[    40.127] (==) Automatically adding GPU devices
[    40.127] (==) Automatically binding GPU devices
[    40.127] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    40.127] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    40.127] 	Entry deleted from font path.
[    40.127] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[    40.127] 	Entry deleted from font path.
[    40.127] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    40.127] 	Entry deleted from font path.
[    40.127] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    40.127] 	Entry deleted from font path.
[    40.127] (==) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    40.127] (==) ModulePath set to "/usr/lib/xorg/modules"
[    40.127] (II) Module ABI versions:
[    40.127] 	X.Org ANSI C Emulation: 0.4
[    40.127] 	X.Org Video Driver: 25.2
[    40.127] 	X.Org XInput driver : 24.4
[    40.127] 	X.Org Server Extension : 10.0
[    40.128] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    40.130] (II) xfree86: Adding drm device (/dev/dri/card1)
[    40.130] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[    40.130] (EE) systemd-logind: failed to take device /dev/dri/card1: Operation not permitted
[    40.130] (II) xfree86: Adding drm device (/dev/dri/card2)
[    40.130] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card2
[    40.130] (EE) systemd-logind: failed to take device /dev/dri/card2: Operation not permitted
[    40.133] (--) PCI:*(0@0:2:0) 8086:3e96:1028:0871 rev 0, Mem @ 0xa2000000/16777216, 0x80000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[    40.133] (--) PCI: (1@0:0:0) 10de:1f82:1458:400e rev 161, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    40.133] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    40.133] (II) "glx" will be loaded by default.
[    40.133] (II) LoadModule: "xorgxrdp"
[    40.134] (II) Loading /usr/lib/xorg/modules/libxorgxrdp.so
[    40.135] (II) Module XORGXRDP: vendor="X.Org Foundation"
[    40.135] 	compiled for 1.21.1.13, module version = 0.9.80
[    40.135] 	ABI class: X.Org Video Driver, version 25.2
[    40.135] xorgxrdpSetup:
[    40.135] (II) LoadModule: "glx"
[    40.135] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    40.138] (II) Module glx: vendor="X.Org Foundation"
[    40.138] 	compiled for 1.21.1.13, module version = 1.0.0
[    40.138] 	ABI class: X.Org Server Extension, version 10.0
[    40.138] (II) LoadModule: "nvidia"
[    40.138] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    40.141] (II) Module nvidia: vendor="NVIDIA Corporation"
[    40.141] 	compiled for 1.6.99.901, module version = 1.0.0
[    40.141] 	Module class: X.Org Video Driver
[    40.141] (II) LoadModule: "xrdpmouse"
[    40.141] (II) Loading /usr/lib/xorg/modules/input/xrdpmouse_drv.so
[    40.141] (II) Module XRDPMOUSE: vendor="X.Org Foundation"
[    40.141] 	compiled for 1.21.1.13, module version = 0.9.80
[    40.141] 	Module class: X.Org XInput Driver
[    40.141] 	ABI class: X.Org XInput driver, version 24.4
[    40.141] rdpmousePlug:
[    40.141] (II) LoadModule: "xrdpkeyb"
[    40.141] (II) Loading /usr/lib/xorg/modules/input/xrdpkeyb_drv.so
[    40.141] (II) Module XRDPKEYB: vendor="X.Org Foundation"
[    40.141] 	compiled for 1.21.1.13, module version = 0.9.80
[    40.141] 	Module class: X.Org XInput Driver
[    40.141] 	ABI class: X.Org XInput driver, version 24.4
[    40.141] rdpkeybPlug:
[    40.141] xorgxrdpCheckWrap: NVIDIA driver found
[    40.142] (II) NVIDIA dlloader X Driver  550.78  Sun Apr 14 06:27:13 UTC 2024
[    40.142] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    40.142] xorgxrdpDriverFunc:
[    40.142] xorgxrdpPciProbe:
[    40.142] (II) Loading sub module "fb"
[    40.142] (II) LoadModule: "fb"
[    40.142] (II) Module "fb" already built-in
[    40.142] (II) Loading sub module "wfb"
[    40.142] (II) LoadModule: "wfb"
[    40.142] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    40.143] (II) Module wfb: vendor="X.Org Foundation"
[    40.143] 	compiled for 1.21.1.13, module version = 1.0.0
[    40.143] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    40.145] (EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
[    40.145] (EE) NVIDIA:     system's kernel log for additional error messages and
[    40.145] (EE) NVIDIA:     consult the NVIDIA README for details.
[    40.145] xorgxrdpPciProbe:
[    40.146] (EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
[    40.146] (EE) NVIDIA:     system's kernel log for additional error messages and
[    40.146] (EE) NVIDIA:     consult the NVIDIA README for details.
[    40.146] (EE) No devices detected.
[    40.146] (EE) 
Fatal server error:
[    40.146] (EE) no screens found(EE) 
[    40.146] (EE) 
Please consult the The X.Org Foundation support 
	 at [url]http://wiki.x.org[/url]
 for help. 
[    40.146] (EE) Please also check the log file at ".xorgxrdp.10.log" for additional information.
[    40.146] (EE) 
[    40.146] (EE) Server terminated with error (1). Closing log file.

dmesg (nothing interesting here)

[    0.000000] Linux version 6.8.9-arch1-2 (linux@archlinux) (gcc (GCC) 14.1.1 20240507, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Tue, 07 May 2024 21:35:54 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a88ffea0-6e6c-4138-82c1-e1575b189989 rw loglevel=3 quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000001011fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000101b000-0x000000002bfb3fff] usable
[    0.000000] BIOS-e820: [mem 0x000000002bfb4000-0x000000002cacdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000002cace000-0x000000002cb4afff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000002cb4b000-0x000000002d044fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000002d045000-0x000000002dc15fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000002dc16000-0x000000002dc16fff] usable
[    0.000000] BIOS-e820: [mem 0x000000002dc20000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040400000-0x0000000048bc2fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000048bcc000-0x0000000065536fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000065537000-0x0000000065537fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000065538000-0x0000000065538fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000065539000-0x0000000068552fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006855c000-0x000000007acfffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ad00000-0x000000007f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087c7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] e820: update [mem 0x0725d018-0x07266a57] usable ==> usable
[    0.000000] e820: update [mem 0x0725d018-0x07266a57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001011fff] usable
[    0.000000] reserve setup_data: [mem 0x000000000101b000-0x000000000725d017] usable
[    0.000000] reserve setup_data: [mem 0x000000000725d018-0x0000000007266a57] usable
[    0.000000] reserve setup_data: [mem 0x0000000007266a58-0x000000002bfb3fff] usable
[    0.000000] reserve setup_data: [mem 0x000000002bfb4000-0x000000002cacdfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000002cace000-0x000000002cb4afff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000002cb4b000-0x000000002d044fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000002d045000-0x000000002dc15fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000002dc16000-0x000000002dc16fff] usable
[    0.000000] reserve setup_data: [mem 0x000000002dc20000-0x000000003fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000040400000-0x0000000048bc2fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000048bcc000-0x0000000065536fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000065537000-0x0000000065537fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000065538000-0x0000000065538fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000065539000-0x0000000068552fff] usable
[    0.000000] reserve setup_data: [mem 0x000000006855c000-0x000000007acfffff] usable
[    0.000000] reserve setup_data: [mem 0x000000007ad00000-0x000000007f7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000087c7fffff] usable
[    0.000000] efi: EFI v2.7 by American Megatrends
[    0.000000] efi: ACPI 2.0=0x2cae7000 ACPI=0x2cae7000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x2cf85000 ESRT=0x2d751498 MEMATTR=0x29f97018 INITRD=0x1855e718 RNG=0x2cae6018 TPMEventLog=0x7267018 
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem63: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
[    0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] reserved
[    0.000000] efi: Not removing mem64: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem65: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem66: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem67: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: Dell Inc. Precision 3630 Tower/0NNNCT, BIOS 2.27.0 02/29/2024
[    0.000000] tsc: Detected 3800.000 MHz processor
[    0.000000] tsc: Detected 3799.900 MHz TSC
[    0.002660] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002662] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002670] last_pfn = 0x87c800 max_arch_pfn = 0x400000000
[    0.002674] MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs
[    0.002676] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003006] last_pfn = 0x7ad00 max_arch_pfn = 0x400000000
[    0.008773] esrt: Reserving ESRT space from 0x000000002d751498 to 0x000000002d7514d0.
[    0.008780] Using GB pages for direct mapping
[    0.009171] Secure boot enabled
[    0.009172] RAMDISK: [mem 0x0726f000-0x0dce0fff]
[    0.009248] ACPI: Early table checksum verification disabled
[    0.009250] ACPI: RSDP 0x000000002CAE7000 000024 (v02 DELL  )
[    0.009253] ACPI: XSDT 0x000000002CAE70C8 00010C (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.009258] ACPI: FACP 0x000000002CB29F88 000114 (v06 DELL   CBX3     01072009 AMI  00010013)
[    0.009263] ACPI: DSDT 0x000000002CAE7260 042D25 (v02 DELL   CBX3     01072009 INTL 20160527)
[    0.009265] ACPI: FACS 0x000000002D043F80 000040
[    0.009267] ACPI: APIC 0x000000002CB2A0A0 0000F4 (v04 DELL   CBX3     01072009 AMI  00010013)
[    0.009270] ACPI: FPDT 0x000000002CB2A198 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.009272] ACPI: FIDT 0x000000002CB2A1E0 00009C (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.009275] ACPI: MCFG 0x000000002CB2A280 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.009277] ACPI: SSDT 0x000000002CB2A2C0 001B26 (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.009279] ACPI: SSDT 0x000000002CB2BDE8 0033EC (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.009282] ACPI: SSDT 0x000000002CB2F1D8 002497 (v02 PegSsd PegSsdt  00001000 INTL 20160527)
[    0.009284] ACPI: HPET 0x000000002CB31670 000038 (v01 DELL\x CBX3     00000002      01000013)
[    0.009287] ACPI: SSDT 0x000000002CB316A8 000FD3 (v02 DELL\x Ther_Rvp 00001000 INTL 20160527)
[    0.009289] ACPI: SSDT 0x000000002CB32680 000ADD (v02 INTEL  DELL__TB 00000000 INTL 20160527)
[    0.009292] ACPI: UEFI 0x000000002CB33160 000042 (v01 DELL\x CBX3     00000002      01000013)
[    0.009294] ACPI: LPIT 0x000000002CB331A8 000094 (v01 DELL\x CBX3     00000002      01000013)
[    0.009296] ACPI: SSDT 0x000000002CB33240 0027DE (v02 DELL\x PtidDevc 00001000 INTL 20160527)
[    0.009299] ACPI: SSDT 0x000000002CB35A20 0014E2 (v02 DELL\x TbtTypeC 00000000 INTL 20160527)
[    0.009301] ACPI: DBGP 0x000000002CB36F08 000034 (v01 DELL\x CBX3     00000002      01000013)
[    0.009303] ACPI: DBG2 0x000000002CB36F40 000054 (v00 DELL\x CBX3     00000002      01000013)
[    0.009306] ACPI: SSDT 0x000000002CB36F98 001B67 (v02 DELL\x UsbCTabl 00001000 INTL 20160527)
[    0.009308] ACPI: SLIC 0x000000002CB38B00 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
[    0.009311] ACPI: MSDM 0x000000002CB38C78 000055 (v03 DELL   CBX3     06222004 AMI  00010013)
[    0.009313] ACPI: DMAR 0x000000002CB38CD0 0000C8 (v01 INTEL  EDK2     00000002      01000013)
[    0.009316] ACPI: SSDT 0x000000002CB38D98 000144 (v02 Intel  ADebTabl 00001000 INTL 20160527)
[    0.009318] ACPI: BGRT 0x000000002CB38EE0 000038 (v00                 01072009 AMI  00010013)
[    0.009320] ACPI: TPM2 0x000000002CB38F18 000034 (v04 DELL\x CBX3     00000001 AMI  00000000)
[    0.009323] ACPI: ASF! 0x000000002CB38F50 0000A0 (v32 DELL\x CBX3     00000002      01000013)
[    0.009326] ACPI: EINJ 0x000000002CB38FF0 000130 (v01 AMI    AMI.EINJ 00000000 AMI. 00000000)
[    0.009329] ACPI: ERST 0x000000002CB39120 000230 (v01 AMIER  AMI.ERST 00000000 AMI. 00000000)
[    0.009331] ACPI: BERT 0x000000002CB39350 000030 (v01 AMI    AMI.BERT 00000000 AMI. 00000000)
[    0.009333] ACPI: HEST 0x000000002CB39380 0000A8 (v01 AMI    AMI.HEST 00000000 AMI. 00000000)
[    0.009335] ACPI: Reserving FACP table memory at [mem 0x2cb29f88-0x2cb2a09b]
[    0.009337] ACPI: Reserving DSDT table memory at [mem 0x2cae7260-0x2cb29f84]
[    0.009337] ACPI: Reserving FACS table memory at [mem 0x2d043f80-0x2d043fbf]
[    0.009338] ACPI: Reserving APIC table memory at [mem 0x2cb2a0a0-0x2cb2a193]
[    0.009339] ACPI: Reserving FPDT table memory at [mem 0x2cb2a198-0x2cb2a1db]
[    0.009339] ACPI: Reserving FIDT table memory at [mem 0x2cb2a1e0-0x2cb2a27b]
[    0.009340] ACPI: Reserving MCFG table memory at [mem 0x2cb2a280-0x2cb2a2bb]
[    0.009341] ACPI: Reserving SSDT table memory at [mem 0x2cb2a2c0-0x2cb2bde5]
[    0.009341] ACPI: Reserving SSDT table memory at [mem 0x2cb2bde8-0x2cb2f1d3]
[    0.009342] ACPI: Reserving SSDT table memory at [mem 0x2cb2f1d8-0x2cb3166e]
[    0.009343] ACPI: Reserving HPET table memory at [mem 0x2cb31670-0x2cb316a7]
[    0.009343] ACPI: Reserving SSDT table memory at [mem 0x2cb316a8-0x2cb3267a]
[    0.009344] ACPI: Reserving SSDT table memory at [mem 0x2cb32680-0x2cb3315c]
[    0.009345] ACPI: Reserving UEFI table memory at [mem 0x2cb33160-0x2cb331a1]
[    0.009345] ACPI: Reserving LPIT table memory at [mem 0x2cb331a8-0x2cb3323b]
[    0.009346] ACPI: Reserving SSDT table memory at [mem 0x2cb33240-0x2cb35a1d]
[    0.009347] ACPI: Reserving SSDT table memory at [mem 0x2cb35a20-0x2cb36f01]
[    0.009347] ACPI: Reserving DBGP table memory at [mem 0x2cb36f08-0x2cb36f3b]
[    0.009348] ACPI: Reserving DBG2 table memory at [mem 0x2cb36f40-0x2cb36f93]
[    0.009349] ACPI: Reserving SSDT table memory at [mem 0x2cb36f98-0x2cb38afe]
[    0.009349] ACPI: Reserving SLIC table memory at [mem 0x2cb38b00-0x2cb38c75]
[    0.009350] ACPI: Reserving MSDM table memory at [mem 0x2cb38c78-0x2cb38ccc]
[    0.009351] ACPI: Reserving DMAR table memory at [mem 0x2cb38cd0-0x2cb38d97]
[    0.009351] ACPI: Reserving SSDT table memory at [mem 0x2cb38d98-0x2cb38edb]
[    0.009352] ACPI: Reserving BGRT table memory at [mem 0x2cb38ee0-0x2cb38f17]
[    0.009353] ACPI: Reserving TPM2 table memory at [mem 0x2cb38f18-0x2cb38f4b]
[    0.009353] ACPI: Reserving ASF! table memory at [mem 0x2cb38f50-0x2cb38fef]
[    0.009354] ACPI: Reserving EINJ table memory at [mem 0x2cb38ff0-0x2cb3911f]
[    0.009355] ACPI: Reserving ERST table memory at [mem 0x2cb39120-0x2cb3934f]
[    0.009355] ACPI: Reserving BERT table memory at [mem 0x2cb39350-0x2cb3937f]
[    0.009356] ACPI: Reserving HEST table memory at [mem 0x2cb39380-0x2cb39427]
[    0.009627] No NUMA configuration found
[    0.009627] Faking a node at [mem 0x0000000000000000-0x000000087c7fffff]
[    0.009630] NODE_DATA(0) allocated [mem 0x87c7fb000-0x87c7fffff]
[    0.009667] Zone ranges:
[    0.009667]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009669]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.009670]   Normal   [mem 0x0000000100000000-0x000000087c7fffff]
[    0.009671]   Device   empty
[    0.009672] Movable zone start for each node
[    0.009673] Early memory node ranges
[    0.009673]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.009674]   node   0: [mem 0x0000000000100000-0x0000000001011fff]
[    0.009675]   node   0: [mem 0x000000000101b000-0x000000002bfb3fff]
[    0.009676]   node   0: [mem 0x000000002dc16000-0x000000002dc16fff]
[    0.009676]   node   0: [mem 0x000000002dc20000-0x000000003fffffff]
[    0.009677]   node   0: [mem 0x0000000040400000-0x0000000048bc2fff]
[    0.009678]   node   0: [mem 0x0000000048bcc000-0x0000000065536fff]
[    0.009678]   node   0: [mem 0x0000000065539000-0x0000000068552fff]
[    0.009679]   node   0: [mem 0x000000006855c000-0x000000007acfffff]
[    0.009680]   node   0: [mem 0x0000000100000000-0x000000087c7fffff]
[    0.009682] Initmem setup node 0 [mem 0x0000000000001000-0x000000087c7fffff]
[    0.009685] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009701] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.010347] On node 0, zone DMA32: 9 pages in unavailable ranges
[    0.010400] On node 0, zone DMA32: 7266 pages in unavailable ranges
[    0.010701] On node 0, zone DMA32: 9 pages in unavailable ranges
[    0.010854] On node 0, zone DMA32: 1024 pages in unavailable ranges
[    0.011343] On node 0, zone DMA32: 9 pages in unavailable ranges
[    0.011395] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.011715] On node 0, zone DMA32: 9 pages in unavailable ranges
[    0.044648] On node 0, zone Normal: 21248 pages in unavailable ranges
[    0.044761] On node 0, zone Normal: 14336 pages in unavailable ranges
[    0.044795] Reserving Intel graphics memory at [mem 0x7d800000-0x7f7fffff]
[    0.045476] ACPI: PM-Timer IO Port: 0x1808
[    0.045482] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.045484] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.045484] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.045485] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.045486] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.045486] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.045487] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.045487] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.045488] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.045489] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.045489] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.045490] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.045551] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.045553] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.045554] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.045558] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.045559] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.045571] e820: update [mem 0x27923000-0x279a9fff] usable ==> reserved
[    0.045581] TSC deadline timer available
[    0.045582] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[    0.045596] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.045598] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.045600] PM: hibernation: Registered nosave memory: [mem 0x01012000-0x0101afff]
[    0.045601] PM: hibernation: Registered nosave memory: [mem 0x0725d000-0x0725dfff]
[    0.045602] PM: hibernation: Registered nosave memory: [mem 0x07266000-0x07266fff]
[    0.045604] PM: hibernation: Registered nosave memory: [mem 0x27923000-0x279a9fff]
[    0.045605] PM: hibernation: Registered nosave memory: [mem 0x2bfb4000-0x2cacdfff]
[    0.045606] PM: hibernation: Registered nosave memory: [mem 0x2cace000-0x2cb4afff]
[    0.045606] PM: hibernation: Registered nosave memory: [mem 0x2cb4b000-0x2d044fff]
[    0.045607] PM: hibernation: Registered nosave memory: [mem 0x2d045000-0x2dc15fff]
[    0.045608] PM: hibernation: Registered nosave memory: [mem 0x2dc17000-0x2dc1ffff]
[    0.045609] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff]
[    0.045611] PM: hibernation: Registered nosave memory: [mem 0x48bc3000-0x48bcbfff]
[    0.045612] PM: hibernation: Registered nosave memory: [mem 0x65537000-0x65537fff]
[    0.045613] PM: hibernation: Registered nosave memory: [mem 0x65538000-0x65538fff]
[    0.045614] PM: hibernation: Registered nosave memory: [mem 0x68553000-0x6855bfff]
[    0.045615] PM: hibernation: Registered nosave memory: [mem 0x7ad00000-0x7f7fffff]
[    0.045616] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0xfdffffff]
[    0.045617] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.045617] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.045618] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.045618] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.045619] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.045619] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.045621] [mem 0x7f800000-0xfdffffff] available for PCI devices
[    0.045622] Booting paravirtualized kernel on bare hardware
[    0.045623] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.050012] setup_percpu: NR_CPUS:320 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[    0.050470] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.050476] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.050478] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- 
[    0.050497] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a88ffea0-6e6c-4138-82c1-e1575b189989 rw loglevel=3 quiet
[    0.050545] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[    0.052726] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.053815] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.053963] Fallback order for Node 0: 0 
[    0.053965] Built 1 zonelists, mobility grouping on.  Total pages: 8214054
[    0.053966] Policy zone: Normal
[    0.054123] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.054129] software IO TLB: area num 16.
[    0.126100] Memory: 32530740K/33378392K available (16384K kernel code, 2121K rwdata, 12976K rodata, 3456K init, 3732K bss, 847392K reserved, 0K cma-reserved)
[    0.126285] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[    0.126293] Kernel/User page tables isolation: enabled
[    0.126316] ftrace: allocating 49113 entries in 192 pages
[    0.132842] ftrace: allocated 192 pages with 2 groups
[    0.132900] Dynamic Preempt: full
[    0.132939] rcu: Preemptible hierarchical RCU implementation.
[    0.132940] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
[    0.132940] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.132941] 	Trampoline variant of Tasks RCU enabled.
[    0.132942] 	Rude variant of Tasks RCU enabled.
[    0.132942] 	Tracing variant of Tasks RCU enabled.
[    0.132942] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.132943] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[    0.135123] NR_IRQS: 20736, nr_irqs: 2152, preallocated irqs: 16
[    0.135396] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.135796] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.135822] Console: colour dummy device 80x25
[    0.135824] printk: legacy console [tty0] enabled
[    0.135864] ACPI: Core revision 20230628
[    0.136099] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.136100] APIC: Switch to symmetric I/O mode setup
[    0.136102] DMAR: Host address width 39
[    0.136102] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.136107] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.136109] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.136112] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.136114] DMAR: RMRR base: 0x0000002c99c000 end: 0x0000002c9bbfff
[    0.136115] DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff
[    0.136116] DMAR: RMRR base: 0x0000002ca4e000 end: 0x0000002cacdfff
[    0.136117] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.136118] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.136119] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.139212] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.139214] x2apic enabled
[    0.139272] APIC: Switched APIC routing to: cluster x2apic
[    0.148366] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8bf270d8d, max_idle_ns: 881590865083 ns
[    0.148371] Calibrating delay loop (skipped), value calculated using timer frequency.. 7602.45 BogoMIPS (lpj=12666333)
[    0.148390] x86/cpu: SGX disabled by BIOS.
[    0.148394] CPU0: Thermal monitoring enabled (TM1)
[    0.148431] process: using mwait in idle threads
[    0.148434] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.148434] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.148439] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.148440] Spectre V2 : Mitigation: IBRS
[    0.148441] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.148442] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.148443] RETBleed: Mitigation: IBRS
[    0.148444] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.148445] Spectre V2 : User space: Mitigation: STIBP via prctl
[    0.148446] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.148450] MDS: Mitigation: Clear CPU buffers
[    0.148451] TAA: Mitigation: TSX disabled
[    0.148452] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.148455] SRBDS: Mitigation: Microcode
[    0.148460] GDS: Mitigation: Microcode
[    0.148467] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.148468] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.148469] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.148470] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.148471] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.148472] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.148474] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.148475] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.148476] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.151702] Freeing SMP alternatives memory: 40K
[    0.151702] pid_max: default: 32768 minimum: 301
[    0.151702] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[    0.151702] landlock: Up and running.
[    0.151702] Yama: becoming mindful.
[    0.151702] LSM support for eBPF active
[    0.151702] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.151702] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.151702] smpboot: CPU0: Intel(R) Xeon(R) E-2186G CPU @ 3.80GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[    0.151702] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[    0.151702] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[    0.151702] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[    0.151702] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.151702] ... version:                4
[    0.151702] ... bit width:              48
[    0.151702] ... generic registers:      4
[    0.151702] ... value mask:             0000ffffffffffff
[    0.151702] ... max period:             00007fffffffffff
[    0.151702] ... fixed-purpose events:   3
[    0.151702] ... event mask:             000000070000000f
[    0.151702] signal: max sigframe size: 2032
[    0.151702] Estimated ratio of average max frequency by base frequency (times 1024): 1212
[    0.151702] rcu: Hierarchical SRCU implementation.
[    0.151702] rcu: 	Max phase no-delay instances is 1000.
[    0.151702] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.151702] smp: Bringing up secondary CPUs ...
[    0.151702] smpboot: x86: Booting SMP configuration:
[    0.151702] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.156139] MDS CPU bug present and SMT on, data leak possible. See [url]https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html[/url] for more details.
[    0.156139] MMIO Stale Data CPU bug present and SMT on, data leak possible. See [url]https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html[/url] for more details.
[    0.156139] smp: Brought up 1 node, 12 CPUs
[    0.156139] smpboot: Max logical packages: 1
[    0.156139] smpboot: Total of 12 processors activated (91234.49 BogoMIPS)
[    0.159172] devtmpfs: initialized
[    0.159172] x86/mm: Memory block size: 128MB
[    0.160372] ACPI: PM: Registering ACPI NVS region [mem 0x2cb4b000-0x2d044fff] (5218304 bytes)
[    0.160372] ACPI: PM: Registering ACPI NVS region [mem 0x65537000-0x65537fff] (4096 bytes)
[    0.160372] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.160372] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.160372] pinctrl core: initialized pinctrl subsystem
[    0.161733] PM: RTC time: 01:41:33, date: 2024-05-17
[    0.162104] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.162405] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.162582] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.162764] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.162774] audit: initializing netlink subsys (disabled)
[    0.162786] audit: type=2000 audit(1715910093.013:1): state=initialized audit_enabled=0 res=1
[    0.162786] thermal_sys: Registered thermal governor 'fair_share'
[    0.162786] thermal_sys: Registered thermal governor 'bang_bang'
[    0.162786] thermal_sys: Registered thermal governor 'step_wise'
[    0.162786] thermal_sys: Registered thermal governor 'user_space'
[    0.162786] thermal_sys: Registered thermal governor 'power_allocator'
[    0.162786] cpuidle: using governor ladder
[    0.162786] cpuidle: using governor menu
[    0.162786] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.162786] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.162786] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[    0.162786] PCI: not using ECAM ([mem 0xf0000000-0xf7ffffff] not reserved)
[    0.162786] PCI: Using configuration type 1 for base access
[    0.162786] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.168420] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.168420] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.168420] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.168420] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.173883] ACPI: Added _OSI(Module Device)
[    0.173883] ACPI: Added _OSI(Processor Device)
[    0.173883] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.173883] ACPI: Added _OSI(Processor Aggregator Device)
[    0.220866] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.227157] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.232205] ACPI: Dynamic OEM Table Load:
[    0.232215] ACPI: SSDT 0xFFFF97FB814E6800 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.232736] ACPI: Dynamic OEM Table Load:
[    0.232741] ACPI: SSDT 0xFFFF97FB814DD800 00070D (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.234136] ACPI: Dynamic OEM Table Load:
[    0.234140] ACPI: SSDT 0xFFFF97FB814C3600 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.235684] ACPI: Dynamic OEM Table Load:
[    0.235689] ACPI: SSDT 0xFFFF97FB814DF800 0005FC (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.237069] ACPI: Dynamic OEM Table Load:
[    0.237074] ACPI: SSDT 0xFFFF97FB814E2400 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.238486] ACPI: Dynamic OEM Table Load:
[    0.238491] ACPI: SSDT 0xFFFF97FB814ED000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.240444] ACPI: Dynamic OEM Table Load:
[    0.240448] ACPI: SSDT 0xFFFF97FB814E3400 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.246178] ACPI: _OSC evaluated successfully for all CPUs
[    0.247358] ACPI: Interpreter enabled
[    0.247389] ACPI: PM: (supports S0 S3 S4 S5)
[    0.247390] ACPI: Using IOAPIC for interrupt routing
[    0.248965] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[    0.250569] PCI: ECAM [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource
[    0.250601] HEST: Table parsing has been initialized.
[    0.250648] GHES: APEI firmware first mode is enabled by APEI bit.
[    0.250651] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.250652] PCI: Ignoring E820 reservations for host bridge windows
[    0.252008] ACPI: Enabled 11 GPEs in block 00 to 7F
[    0.252153] ACPI Error: No handler for Region [WST1] ((____ptrval____)) [GenericSerialBus] (20230628/evregion-130)
[    0.252153] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20230628/exfldio-261)
[    0.252165] ACPI Error: Aborting method \_SB.PCI0.I2C0.PAS1 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[    0.252165] ACPI Error: Aborting method \_GPE._L20 due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[    0.252165] ACPI Error: AE_NOT_EXIST, while evaluating GPE method [_L20] (20230628/evgpe-511)
[    0.268458] ACPI: \_SB_.PCI0.XDCI.USBC: New power resource
[    0.271529] ACPI: \_SB_.PCI0.SAT0.VOL0.V0PR: New power resource
[    0.271927] ACPI: \_SB_.PCI0.SAT0.VOL1.V1PR: New power resource
[    0.272316] ACPI: \_SB_.PCI0.SAT0.VOL2.V2PR: New power resource
[    0.284800] ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
[    0.289883] ACPI: \_TZ_.FN00: New power resource
[    0.289956] ACPI: \_TZ_.FN01: New power resource
[    0.290028] ACPI: \_TZ_.FN02: New power resource
[    0.290098] ACPI: \_TZ_.FN03: New power resource
[    0.290168] ACPI: \_TZ_.FN04: New power resource
[    0.290736] ACPI: \PIN_: New power resource
[    0.291209] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.291214] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.291318] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.291504] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
[    0.291505] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.292661] PCI host bridge to bus 0000:00
[    0.292662] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.292664] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.292666] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.292668] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000effff window]
[    0.292669] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window]
[    0.292670] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.292671] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.292673] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.292755] pci 0000:00:00.0: [8086:3ec6] type 00 class 0x060000 conventional PCI endpoint
[    0.292814] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port
[    0.292826] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.292828] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.292830] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa40fffff]
[    0.292835] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.292857] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.293468] pci 0000:00:02.0: [8086:3e96] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[    0.293475] pci 0000:00:02.0: BAR 0 [mem 0xa2000000-0xa2ffffff 64bit]
[    0.293480] pci 0000:00:02.0: BAR 2 [mem 0x80000000-0x8fffffff 64bit pref]
[    0.293483] pci 0000:00:02.0: BAR 4 [io  0x4000-0x403f]
[    0.293496] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.293498] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.293702] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 conventional PCI endpoint
[    0.293710] pci 0000:00:08.0: BAR 0 [mem 0x400011b000-0x400011bfff 64bit]
[    0.293874] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000 conventional PCI endpoint
[    0.293908] pci 0000:00:12.0: BAR 0 [mem 0x400011a000-0x400011afff 64bit]
[    0.294183] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 conventional PCI endpoint
[    0.294217] pci 0000:00:14.0: BAR 0 [mem 0x4000100000-0x400010ffff 64bit]
[    0.294350] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.295967] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 conventional PCI endpoint
[    0.295997] pci 0000:00:14.2: BAR 0 [mem 0x4000114000-0x4000115fff 64bit]
[    0.296015] pci 0000:00:14.2: BAR 2 [mem 0x4000119000-0x4000119fff 64bit]
[    0.296588] pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000 conventional PCI endpoint
[    0.297162] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[    0.299780] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000 conventional PCI endpoint
[    0.299811] pci 0000:00:16.0: BAR 0 [mem 0x4000117000-0x4000117fff 64bit]
[    0.299927] pci 0000:00:16.0: PME# supported from D3hot
[    0.300453] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601 conventional PCI endpoint
[    0.300480] pci 0000:00:17.0: BAR 0 [mem 0xa4320000-0xa4321fff]
[    0.300495] pci 0000:00:17.0: BAR 1 [mem 0xa4323000-0xa43230ff]
[    0.300510] pci 0000:00:17.0: BAR 2 [io  0x4090-0x4097]
[    0.300525] pci 0000:00:17.0: BAR 3 [io  0x4080-0x4083]
[    0.300539] pci 0000:00:17.0: BAR 4 [io  0x4060-0x407f]
[    0.300554] pci 0000:00:17.0: BAR 5 [mem 0xa4322000-0xa43227ff]
[    0.300633] pci 0000:00:17.0: PME# supported from D3hot
[    0.301048] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400 PCIe Root Port
[    0.301104] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.301115] pci 0000:00:1b.0:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.301254] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.301295] pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
[    0.302159] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400 PCIe Root Port
[    0.302213] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.302356] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.303142] pci 0000:00:1c.4: [8086:a33c] type 01 class 0x060400 PCIe Root Port
[    0.303198] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.303209] pci 0000:00:1c.4:   bridge window [mem 0xa4100000-0xa41fffff]
[    0.303344] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.303387] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[    0.304181] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400 PCIe Root Port
[    0.304235] pci 0000:00:1d.0: PCI bridge to [bus 05]
[    0.304369] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.305130] pci 0000:00:1d.2: [8086:a332] type 01 class 0x060400 PCIe Root Port
[    0.305186] pci 0000:00:1d.2: PCI bridge to [bus 06-07]
[    0.305332] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[    0.305373] pci 0000:00:1d.2: PTM enabled (root), 4ns granularity
[    0.306192] pci 0000:00:1f.0: [8086:a309] type 00 class 0x060100 conventional PCI endpoint
[    0.306710] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300 conventional PCI endpoint
[    0.306769] pci 0000:00:1f.3: BAR 0 [mem 0x4000110000-0x4000113fff 64bit]
[    0.306843] pci 0000:00:1f.3: BAR 4 [mem 0x4000000000-0x40000fffff 64bit]
[    0.306991] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.310185] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 conventional PCI endpoint
[    0.310350] pci 0000:00:1f.4: BAR 0 [mem 0x4000116000-0x40001160ff 64bit]
[    0.310538] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
[    0.310965] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 conventional PCI endpoint
[    0.310990] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
[    0.311159] pci 0000:00:1f.6: [8086:15bb] type 00 class 0x020000 conventional PCI endpoint
[    0.311205] pci 0000:00:1f.6: BAR 0 [mem 0xa4300000-0xa431ffff]
[    0.311446] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.311576] pci 0000:01:00.0: [10de:1f82] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.311595] pci 0000:01:00.0: BAR 0 [mem 0xa3000000-0xa3ffffff]
[    0.311609] pci 0000:01:00.0: BAR 1 [mem 0x90000000-0x9fffffff 64bit pref]
[    0.311624] pci 0000:01:00.0: BAR 3 [mem 0xa0000000-0xa1ffffff 64bit pref]
[    0.311632] pci 0000:01:00.0: BAR 5 [io  0x3000-0x307f]
[    0.311641] pci 0000:01:00.0: ROM [mem 0xa4000000-0xa407ffff pref]
[    0.311725] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.311900] pci 0000:01:00.1: [10de:10fa] type 00 class 0x040300 PCIe Endpoint
[    0.311918] pci 0000:01:00.1: BAR 0 [mem 0xa4080000-0xa4083fff]
[    0.312117] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.312270] pci 0000:02:00.0: [1179:011a] type 00 class 0x010802 PCIe Endpoint
[    0.312305] pci 0000:02:00.0: BAR 0 [mem 0xa4200000-0xa4203fff 64bit]
[    0.312733] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.312872] acpiphp: Slot [1] registered
[    0.312884] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.313136] pci 0000:04:00.0: [8086:2725] type 00 class 0x028000 PCIe Endpoint
[    0.313275] pci 0000:04:00.0: BAR 0 [mem 0xa4100000-0xa4103fff 64bit]
[    0.313727] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.314228] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.314364] acpiphp: Slot [1-1] registered
[    0.314375] pci 0000:00:1d.0: PCI bridge to [bus 05]
[    0.314542] pci 0000:06:00.0: [1b21:1080] type 01 class 0x060400 PCIe to PCI/PCI-X bridge
[    0.314603] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.314754] pci 0000:06:00.0: supports D1 D2
[    0.314755] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.325088] pci 0000:00:1d.2: PCI bridge to [bus 06-07]
[    0.325170] pci_bus 0000:07: extended config space not accessible
[    0.325301] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.327044] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.327121] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.327196] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.327271] ACPI: PCI: Interrupt link LNKD configured for IRQ 1
[    0.327347] ACPI: PCI: Interrupt link LNKE configured for IRQ 1
[    0.327422] ACPI: PCI: Interrupt link LNKF configured for IRQ 1
[    0.327497] ACPI: PCI: Interrupt link LNKG configured for IRQ 1
[    0.327572] ACPI: PCI: Interrupt link LNKH configured for IRQ 1
[    0.332363] iommu: Default domain type: Translated
[    0.332363] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.332363] SCSI subsystem initialized
[    0.335042] libata version 3.00 loaded.
[    0.335045] ACPI: bus type USB registered
[    0.335053] usbcore: registered new interface driver usbfs
[    0.335057] usbcore: registered new interface driver hub
[    0.335063] usbcore: registered new device driver usb
[    0.335083] EDAC MC: Ver: 3.0.0
[    0.335320] efivars: Registered efivars operations
[    0.335320] NetLabel: Initializing
[    0.335320] NetLabel:  domain hash size = 128
[    0.335320] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.335320] NetLabel:  unlabeled traffic allowed by default
[    0.335320] mctp: management component transport protocol core
[    0.335320] NET: Registered PF_MCTP protocol family
[    0.335320] PCI: Using ACPI for IRQ routing
[    0.374108] PCI: pci_cache_line_size set to 64 bytes
[    0.374326] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.374336] e820: reserve RAM buffer [mem 0x01012000-0x03ffffff]
[    0.374337] e820: reserve RAM buffer [mem 0x0725d018-0x07ffffff]
[    0.374338] e820: reserve RAM buffer [mem 0x27923000-0x27ffffff]
[    0.374339] e820: reserve RAM buffer [mem 0x2bfb4000-0x2bffffff]
[    0.374340] e820: reserve RAM buffer [mem 0x2dc17000-0x2fffffff]
[    0.374341] e820: reserve RAM buffer [mem 0x48bc3000-0x4bffffff]
[    0.374342] e820: reserve RAM buffer [mem 0x65537000-0x67ffffff]
[    0.374343] e820: reserve RAM buffer [mem 0x68553000-0x6bffffff]
[    0.374344] e820: reserve RAM buffer [mem 0x7ad00000-0x7bffffff]
[    0.374345] e820: reserve RAM buffer [mem 0x87c800000-0x87fffffff]
[    0.375054] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.375054] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.375054] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.375054] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.375054] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.375054] vgaarb: loaded
[    0.375104] clocksource: Switched to clocksource tsc-early
[    0.375611] VFS: Disk quotas dquot_6.6.0
[    0.375620] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.375651] pnp: PnP ACPI init
[    0.375681] system 00:00: [mem 0x40000000-0x403fffff] has been reserved
[    0.375914] system 00:01: [io  0x0a00-0x0a3f] has been reserved
[    0.375916] system 00:01: [io  0x0a40-0x0a7f] has been reserved
[    0.376957] pnp 00:02: [dma 0 disabled]
[    0.377129] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.377132] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.377254] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.377381] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.377383] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.377385] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.377386] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.377388] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.377389] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.377391] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.377392] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.377596] system 00:07: [io  0x1800-0x18fe] could not be reserved
[    0.377599] system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.377600] system 00:07: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.377602] system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.377603] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.377605] system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.377606] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.377887] system 00:08: [io  0x2000-0x20fe] has been reserved
[    0.379915] pnp: PnP ACPI: found 10 devices
[    0.385523] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.385621] NET: Registered PF_INET protocol family
[    0.385733] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.398490] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.398521] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.398618] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.398847] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.399020] TCP: Hash tables configured (established 262144 bind 65536)
[    0.399103] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.399157] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.399213] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.399271] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.399276] NET: Registered PF_XDP protocol family
[    0.399288] pci 0000:00:15.0: BAR 0 [mem 0x4000118000-0x4000118fff 64bit]: assigned
[    0.399559] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.399561] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.399564] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa40fffff]
[    0.399566] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.399569] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.399579] pci 0000:00:1b.0:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.399592] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.399613] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.399620] pci 0000:00:1c.4:   bridge window [mem 0xa4100000-0xa41fffff]
[    0.399633] pci 0000:00:1d.0: PCI bridge to [bus 05]
[    0.399652] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.399671] pci 0000:00:1d.2: PCI bridge to [bus 06-07]
[    0.399691] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.399693] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.399694] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.399695] pci_bus 0000:00: resource 7 [mem 0x000e4000-0x000effff window]
[    0.399696] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xefffffff window]
[    0.399697] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
[    0.399699] pci_bus 0000:00: resource 10 [mem 0xfc800000-0xfe7fffff window]
[    0.399700] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.399701] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
[    0.399702] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.399704] pci_bus 0000:02: resource 1 [mem 0xa4200000-0xa42fffff]
[    0.399705] pci_bus 0000:04: resource 1 [mem 0xa4100000-0xa41fffff]
[    0.400222] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    0.400248] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.400272] pci 0000:06:00.0: Disabling ASPM L0s/L1
[    0.400274] pci 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.400277] PCI: CLS 64 bytes, default 64
[    0.400291] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.400292] software IO TLB: mapped [mem 0x0000000076d00000-0x000000007ad00000] (64MB)
[    0.400317] Trying to unpack rootfs image as initramfs...
[    0.406682] Initialise system trusted keyrings
[    0.406691] Key type blacklist registered
[    0.406731] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.406738] zbud: loaded
[    0.406821] fuse: init (API version 7.39)
[    0.406880] integrity: Platform Keyring initialized
[    0.406883] integrity: Machine keyring initialized
[    0.416860] Key type asymmetric registered
[    0.416863] Asymmetric key parser 'x509' registered
[    0.416879] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.416919] io scheduler mq-deadline registered
[    0.416920] io scheduler kyber registered
[    0.416930] io scheduler bfq registered
[    0.417277] pcieport 0000:00:01.0: AER: enabled with IRQ 122
[    0.417546] pcieport 0000:00:1b.0: AER: enabled with IRQ 123
[    0.417581] pcieport 0000:00:1b.0: DPC: enabled with IRQ 123
[    0.417583] pcieport 0000:00:1b.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.418031] pcieport 0000:00:1c.4: AER: enabled with IRQ 125
[    0.418067] pcieport 0000:00:1c.4: DPC: enabled with IRQ 125
[    0.418068] pcieport 0000:00:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.418492] pcieport 0000:00:1d.2: AER: enabled with IRQ 127
[    0.418522] pcieport 0000:00:1d.2: DPC: enabled with IRQ 127
[    0.418523] pcieport 0000:00:1d.2: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.418662] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.419320] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.419341] ACPI: button: Sleep Button [SLPB]
[    0.419361] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.419373] ACPI: button: Power Button [PWRB]
[    0.419393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.419432] ACPI: button: Power Button [PWRF]
[    0.420181] thermal LNXTHERM:00: registered as thermal_zone0
[    0.420182] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.420273] ERST: Error Record Serialization Table (ERST) support is initialized.
[    0.420291] pstore: Using crash dump compression: deflate
[    0.420292] pstore: Registered erst as persistent store backend
[    0.420404] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.421223] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.424140] hpet_acpi_add: no address or irqs in _CRS
[    0.424170] Non-volatile memory driver v1.3
[    0.424171] Linux agpgart interface v0.103
[    0.451575] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[    0.479298] ACPI: bus type drm_connector registered
[    0.481595] ahci 0000:00:17.0: version 3.0
[    0.491935] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    0.491939] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst 
[    0.511543] Freeing initrd memory: 109000K
[    0.520047] scsi host0: ahci
[    0.520339] scsi host1: ahci
[    0.520631] scsi host2: ahci
[    0.520764] scsi host3: ahci
[    0.520800] ata1: SATA max UDMA/133 abar m2048@0xa4322000 port 0xa4322100 irq 128 lpm-pol 0
[    0.520803] ata2: SATA max UDMA/133 abar m2048@0xa4322000 port 0xa4322180 irq 128 lpm-pol 0
[    0.520806] ata3: SATA max UDMA/133 abar m2048@0xa4322000 port 0xa4322200 irq 128 lpm-pol 0
[    0.520808] ata4: SATA max UDMA/133 abar m2048@0xa4322000 port 0xa4322280 irq 128 lpm-pol 0
[    0.520887] usbcore: registered new interface driver usbserial_generic
[    0.520891] usbserial: USB Serial support registered for generic
[    0.520976] rtc_cmos 00:04: RTC can wake from S4
[    0.522478] rtc_cmos 00:04: registered as rtc0
[    0.522787] rtc_cmos 00:04: setting system clock to 2024-05-17T01:41:33 UTC (1715910093)
[    0.522819] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[    0.523268] intel_pstate: Intel P-state driver initializing
[    0.523850] intel_pstate: Disabling energy efficiency optimization
[    0.523851] intel_pstate: HWP enabled
[    0.523904] ledtrig-cpu: registered to indicate activity on CPUs
[    0.524143] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.524562] fbcon: Deferring console take-over
[    0.524564] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.524590] hid: raw HID events driver (C) Jiri Kosina
[    0.524649] drop_monitor: Initializing network drop monitor service
[    0.524716] NET: Registered PF_INET6 protocol family
[    0.529685] Segment Routing with IPv6
[    0.529686] RPL Segment Routing with IPv6
[    0.529692] In-situ OAM (IOAM) with IPv6
[    0.529707] NET: Registered PF_PACKET protocol family
[    0.530538] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.530899] microcode: Current revision: 0x000000f6
[    0.530901] microcode: Updated early from: 0x000000f4
[    0.531348] IPI shorthand broadcast: enabled
[    0.532631] sched_clock: Marking stable (518672225, 12662871)->(564917864, -33582768)
[    0.532780] registered taskstats version 1
[    0.533696] Loading compiled-in X.509 certificates
[    0.535920] Loaded X.509 cert 'Build time autogenerated kernel key: 4183282d70f116b65f2696270db916493ab86dc2'
[    0.538719] zswap: loaded using pool zstd/zsmalloc
[    0.539050] Key type .fscrypt registered
[    0.539052] Key type fscrypt-provisioning registered
[    0.540227] integrity: Loading X.509 certificate: UEFI:db
[    0.540670] integrity: Loaded X.509 cert 'Database Key: 00dce0d981cc20b1d97734b6680e895d56'
[    0.540671] integrity: Loading X.509 certificate: UEFI:db
[    0.540686] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.540686] integrity: Loading X.509 certificate: UEFI:db
[    0.540697] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.541854] PM:   Magic number: 8:506:660
[    0.544903] RAS: Correctable Errors collector initialized.
[    0.544955] clk: Disabling unused clocks
[    0.829919] ata4: SATA link down (SStatus 4 SControl 300)
[    0.833752] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.833807] ata3: SATA link down (SStatus 4 SControl 300)
[    0.833870] ata2: SATA link down (SStatus 4 SControl 300)
[    0.834362] ata1.00: ATA-10: WDC WD40EZAZ-00SF3B0, 80.00A80, max UDMA/133
[    0.841723] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.841734] ata1.00: Features: NCQ-prio
[    0.850044] ata1.00: configured for UDMA/133
[    0.850267] scsi 0:0:0:0: Direct-Access     ATA      WDC WD40EZAZ-00S 0A80 PQ: 0 ANSI: 5
[    0.850846] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    0.850853] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.850870] sd 0:0:0:0: [sda] Write Protect is off
[    0.850874] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.850895] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.850923] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    0.889177]  sda: sda1 sda2 sda3 sda4
[    0.889692] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.892468] Freeing unused decrypted memory: 2028K
[    0.893273] Freeing unused kernel image (initmem) memory: 3456K
[    0.893381] Write protecting the kernel read-only data: 30720k
[    0.894367] Freeing unused kernel image (rodata/data gap) memory: 1360K
[    0.958055] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.958058] rodata_test: all tests were successful
[    0.958059] x86/mm: Checking user space page tables
[    0.989780] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.989782] Run /init as init process
[    0.989783]   with arguments:
[    0.989784]     /init
[    0.989785]   with environment:
[    0.989785]     HOME=/
[    0.989786]     TERM=linux
[    0.989786]     BOOT_IMAGE=/boot/vmlinuz-linux
[    1.213607] nvidia: loading out-of-tree module taints kernel.
[    1.213615] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    1.313919] nvidia-nvlink: Nvlink Core is being initialized, major device number 242

[    1.314796] nvidia 0000:01:00.0: enabling device (0100 -> 0103)
[    1.314879] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[    1.359420] NVRM: loading NVIDIA UNIX Open Kernel Module for x86_64  550.78  Release Build  (archlinux-builder@)  
[    1.363742] wmi_bus wmi_bus-PNP0C14:04: WQBC data block query control method not found
[    1.418889] nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for x86_64  550.78  Release Build  (archlinux-builder@)  
[    1.426070] tsc: Refined TSC clocksource calibration: 3792.001 MHz
[    1.426074] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d51a7cf3b3, max_idle_ns: 881590686630 ns
[    1.426125] clocksource: Switched to clocksource tsc
[    1.613044] nvidia-uvm: Loaded the UVM driver, major device number 240.
[    1.617060] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    2.811109] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[    2.811636] nvidia 0000:01:00.0: [drm] Cannot find any crtc or sizes
[    2.944047] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.944054] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.945160] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    2.945465] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.945468] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.945471] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    2.945514] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[    2.945517] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.945519] usb usb1: Product: xHCI Host Controller
[    2.945520] usb usb1: Manufacturer: Linux 6.8.9-arch1-2 xhci-hcd
[    2.945522] usb usb1: SerialNumber: 0000:00:14.0
[    2.945668] hub 1-0:1.0: USB hub found
[    2.945704] hub 1-0:1.0: 16 ports detected
[    2.948278] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[    2.948281] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.948282] usb usb2: Product: xHCI Host Controller
[    2.948283] usb usb2: Manufacturer: Linux 6.8.9-arch1-2 xhci-hcd
[    2.948284] usb usb2: SerialNumber: 0000:00:14.0
[    2.948346] hub 2-0:1.0: USB hub found
[    2.948361] hub 2-0:1.0: 10 ports detected
[    2.956938] nvme nvme0: pci function 0000:02:00.0
[    2.967280] nvme nvme0: 12/0/0 default/read/poll queues
[    2.969832]  nvme0n1: p1 p2 p3 p4 p6
[    3.199334] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    3.339955] usb 1-2: New USB device found, idVendor=0c76, idProduct=161e, bcdDevice= 1.00
[    3.339959] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.339961] usb 1-2: Product: USB PnP Audio Device
[    3.358308] usbcore: registered new interface driver usbhid
[    3.358309] usbhid: USB HID core driver
[    3.361866] input: USB PnP Audio Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:0C76:161E.0001/input/input3
[    3.410493] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.415281] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[    3.416460] hid-generic 0003:0C76:161E.0001: input,hidraw0: USB HID v1.00 Device [USB PnP Audio Device] on usb-0000:00:14.0-2/input2
[    3.416617] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.462671] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[    3.610279] usb 1-8: New USB device found, idVendor=046a, idProduct=c091, bcdDevice= 1.05
[    3.610282] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.610283] usb 1-8: Product: CHERRY Wireless Desktop
[    3.610284] usb 1-8: Manufacturer: Cherry GmbH
[    3.612649] input: Cherry GmbH CHERRY Wireless Desktop as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046A:C091.0002/input/input4
[    3.669414] hid-generic 0003:046A:C091.0002: input,hidraw1: USB HID v1.11 Keyboard [Cherry GmbH CHERRY Wireless Desktop] on usb-0000:00:14.0-8/input0
[    3.672571] input: Cherry GmbH CHERRY Wireless Desktop Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046A:C091.0003/input/input5
[    3.672600] input: Cherry GmbH CHERRY Wireless Desktop as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046A:C091.0003/input/input6
[    3.672637] input: Cherry GmbH CHERRY Wireless Desktop Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046A:C091.0003/input/input7
[    3.729366] input: Cherry GmbH CHERRY Wireless Desktop System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046A:C091.0003/input/input8
[    3.729411] hid-generic 0003:046A:C091.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Cherry GmbH CHERRY Wireless Desktop] on usb-0000:00:14.0-8/input1
[    3.820331] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP
[    3.869893] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 2
[    3.872292] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.872770] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    3.872886] i915 display info: display version: 9
[    3.872888] i915 display info: cursor_needs_physical: no
[    3.872889] i915 display info: has_cdclk_crawl: no
[    3.872890] i915 display info: has_cdclk_squash: no
[    3.872890] i915 display info: has_ddi: yes
[    3.872891] i915 display info: has_dp_mst: yes
[    3.872892] i915 display info: has_dsb: no
[    3.872893] i915 display info: has_fpga_dbg: yes
[    3.872893] i915 display info: has_gmch: no
[    3.872894] i915 display info: has_hotplug: yes
[    3.872895] i915 display info: has_hti: no
[    3.872895] i915 display info: has_ipc: yes
[    3.872896] i915 display info: has_overlay: no
[    3.872897] i915 display info: has_psr: yes
[    3.872897] i915 display info: has_psr_hw_tracking: yes
[    3.872898] i915 display info: overlay_needs_physical: no
[    3.872899] i915 display info: supports_tv: no
[    3.872899] i915 display info: has_hdcp: yes
[    3.872900] i915 display info: has_dmc: yes
[    3.872901] i915 display info: has_dsc: no
[    3.937580] Registered IR keymap rc-cec
[    3.937597] rc rc0: DP-4 as /devices/pci0000:00/0000:00:02.0/rc/rc0
[    3.937619] input: DP-4 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input10
[    4.057055] fbcon: i915drmfb (fb0) is primary device
[    4.057062] fbcon: Deferring console take-over
[    4.057068] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    4.154022] fbcon: Taking over console
[    4.304944] EXT4-fs (nvme0n1p2): mounted filesystem a88ffea0-6e6c-4138-82c1-e1575b189989 r/w with ordered data mode. Quota mode: none.
[    4.321749] Console: switching to colour frame buffer device 240x67
[    4.593170] systemd[1]: systemd 255.6-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    4.593176] systemd[1]: Detected architecture x86-64.
[    4.594078] systemd[1]: Hostname set to <hermes>.
[    5.036354] systemd[1]: bpf-lsm: LSM BPF program attached
[    5.143604] systemd[1]: Queued start job for default target Graphical Interface.
[    5.179134] systemd[1]: Created slice Slice /system/dirmngr.
[    5.180118] systemd[1]: Created slice Slice /system/getty.
[    5.180976] systemd[1]: Created slice Slice /system/gpg-agent.
[    5.181822] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    5.182655] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    5.183514] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    5.184353] systemd[1]: Created slice Slice /system/keyboxd.
[    5.185181] systemd[1]: Created slice Slice /system/modprobe.
[    5.186094] systemd[1]: Created slice Slice /system/systemd-fsck.
[    5.186747] systemd[1]: Created slice User and Session Slice.
[    5.186933] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.187087] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.187525] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.187588] systemd[1]: Expecting device /dev/nvme0n1p1...
[    5.187610] systemd[1]: Expecting device /dev/sda1...
[    5.187624] systemd[1]: Expecting device /dev/sda2...
[    5.187640] systemd[1]: Expecting device /dev/sda3...
[    5.187654] systemd[1]: Expecting device /dev/sda4...
[    5.187679] systemd[1]: Reached target Local Encrypted Volumes.
[    5.187732] systemd[1]: Reached target Local Integrity Protected Volumes.
[    5.187787] systemd[1]: Reached target Path Units.
[    5.187825] systemd[1]: Reached target Remote File Systems.
[    5.187852] systemd[1]: Reached target Slice Units.
[    5.187916] systemd[1]: Reached target Local Verity Protected Volumes.
[    5.188120] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.191585] systemd[1]: Listening on Process Core Dump Socket.
[    5.191945] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.192301] systemd[1]: Listening on Journal Socket.
[    5.192819] systemd[1]: Listening on Network Service Netlink Socket.
[    5.192920] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    5.193318] systemd[1]: Listening on udev Control Socket.
[    5.193605] systemd[1]: Listening on udev Kernel Socket.
[    5.193904] systemd[1]: Listening on User Database Manager Socket.
[    5.196243] systemd[1]: Mounting Huge Pages File System...
[    5.198082] systemd[1]: Mounting POSIX Message Queue File System...
[    5.200048] systemd[1]: Mounting Kernel Debug File System...
[    5.202024] systemd[1]: Mounting Kernel Trace File System...
[    5.204279] systemd[1]: Starting Create List of Static Device Nodes...
[    5.206529] systemd[1]: Starting Load Kernel Module configfs...
[    5.209357] systemd[1]: Starting Load Kernel Module dm_mod...
[    5.210121] systemd[1]: Starting Load Kernel Module drm...
[    5.210866] systemd[1]: Starting Load Kernel Module fuse...
[    5.211592] systemd[1]: Starting Load Kernel Module loop...
[    5.211651] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    5.213294] systemd[1]: Starting Journal Service...
[    5.214651] systemd[1]: Starting Load Kernel Modules...
[    5.215342] systemd[1]: Starting Generate network units from Kernel command line...
[    5.215362] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    5.216010] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.216057] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    5.216704] systemd[1]: Starting Coldplug All udev Devices...
[    5.218105] systemd[1]: Mounted Huge Pages File System.
[    5.218217] systemd[1]: Mounted POSIX Message Queue File System.
[    5.218332] systemd[1]: Mounted Kernel Debug File System.
[    5.218455] systemd[1]: Mounted Kernel Trace File System.
[    5.218631] systemd[1]: Finished Create List of Static Device Nodes.
[    5.218927] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    5.219062] systemd[1]: Finished Load Kernel Module configfs.
[    5.219363] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    5.219506] systemd[1]: Finished Load Kernel Module drm.
[    5.219811] loop: module loaded
[    5.219815] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    5.219957] systemd[1]: Finished Load Kernel Module fuse.
[    5.220238] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    5.220324] systemd[1]: Finished Load Kernel Module loop.
[    5.221297] systemd[1]: Mounting FUSE Control File System...
[    5.221966] systemd[1]: Mounting Kernel Configuration File System...
[    5.222641] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[    5.222880] systemd[1]: Finished Generate network units from Kernel command line.
[    5.227159] systemd[1]: Mounted Kernel Configuration File System.
[    5.228023] systemd[1]: Mounted FUSE Control File System.
[    5.228972] Asymmetric key parser 'pkcs8' registered
[    5.229127] device-mapper: uevent: version 1.0.3
[    5.229190] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    5.229582] systemd[1]: Finished Load Kernel Modules.
[    5.229959] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    5.230121] systemd[1]: Finished Load Kernel Module dm_mod.
[    5.230431] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    5.231258] systemd[1]: Starting Apply Kernel Variables...
[    5.233268] systemd-journald[339]: Collecting audit messages is disabled.
[    5.235579] systemd[1]: Starting User Database Manager...
[    5.239154] systemd[1]: Finished Apply Kernel Variables.
[    5.261282] systemd[1]: Started Journal Service.
[    5.263025] EXT4-fs (nvme0n1p2): re-mounted a88ffea0-6e6c-4138-82c1-e1575b189989 r/w. Quota mode: none.
[    5.276535] systemd-journald[339]: Received client request to flush runtime journal.
[    5.288083] systemd-journald[339]: /var/log/journal/113047646feb4cdaacf1a8ff22cd6ae4/system.journal: Journal file uses a different sequence number ID, rotating.
[    5.288087] systemd-journald[339]: Rotating system journal.
[    5.421475] mousedev: PS/2 mouse device common for all mice
[    5.434307] intel_pmc_core INT33A1:00:  initialized
[    5.436584] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
[    5.445417] pps_core: LinuxPPS API ver. 1 registered
[    5.445420] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    5.472929] PTP clock support registered
[    5.473417] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    5.473493] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    5.473542] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    5.475573] intel-lpss 0000:00:15.0: enabling device (0100 -> 0102)
[    5.475721] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.476848] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    5.500126] i2c i2c-10: 2/4 memory slots populated (from DMI)
[    5.500881] i2c i2c-10: Successfully instantiated SPD at 0x51
[    5.501655] i2c i2c-10: Successfully instantiated SPD at 0x53
[    5.511670] input: Dell AIO WMI hotkeys as /devices/virtual/input/input12
[    5.511712] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[    5.526840] mc: Linux media interface: v0.10
[    5.528011] Creating 1 MTD partitions on "0000:00:1f.5":
[    5.528014] 0x000000000000-0x000002000000 : "BIOS"
[    5.528121] e1000e: Intel(R) PRO/1000 Network Driver
[    5.528123] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    5.529737] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    5.555348] Adding 37748732k swap on /dev/sda4.  Priority:-2 extents:1 across:37748732k 
[    5.572235] iTCO_vendor_support: vendor-support=0
[    5.576100] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[    5.576399] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.576593] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.576768] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    5.577502] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.577506] cfg80211: failed to load regulatory.db
[    5.579121] ee1004 10-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    5.579884] ee1004 10-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[    5.579904] input: Dell WMI hotkeys as /devices/platform/PNP0C14:04/wmi_bus/wmi_bus-PNP0C14:04/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input13
[    5.590195] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    5.590332] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.596044] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.596047] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.596049] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.596050] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.596051] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.602667] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.606298] cryptd: max_cpu_qlen set to 1000
[    5.606310] i8042: PNP: No PS/2 controller found.
[    5.606479] Intel(R) Wireless WiFi driver for Linux
[    5.606565] iwlwifi 0000:04:00.0: enabling device (0100 -> 0102)
[    5.608026] iwlwifi 0000:04:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000
[    5.608048] iwlwifi 0000:04:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000
[    5.616636] snd_hda_intel 0000:00:1f.3: enabling device (0100 -> 0102)
[    5.616798] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.617031] snd_hda_intel 0000:01:00.1: enabling device (0100 -> 0102)
[    5.617102] snd_hda_intel 0000:01:00.1: Disabling MSI
[    5.617107] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    5.619326] usb 1-2: Warning! Unlikely big volume range (=496), cval->res is probably wrong.
[    5.619361] usb 1-2: [50] FU [Mic Capture Volume] ch = 1, val = 0/7936/16
[    5.619794] usbcore: registered new interface driver snd-usb-audio
[    5.621342] iwlwifi 0000:04:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41
[    5.621908] iwlwifi 0000:04:00.0: loaded firmware version 86.fb5c9aeb.0 ty-a0-gf-a0-86.ucode op_mode iwlmvm
[    5.623125] AVX2 version of gcm_enc/dec engaged.
[    5.623162] AES CTR mode by8 optimization enabled
[    5.689656] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
[    5.689698] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
[    5.689738] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
[    5.689773] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
[    5.745210] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[    5.745216] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    5.745219] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    5.745221] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    5.745222] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    5.745224] snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x19
[    5.767387] iwlwifi 0000:04:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420
[    5.767444] thermal thermal_zone2: failed to read out thermal zone (-61)
[    5.774426] iwlwifi 0000:04:00.0: WRT: Invalid buffer destination
[    5.838111] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card1/input18
[    5.838153] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card1/input19
[    5.838188] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input20
[    5.838221] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input21
[    5.838882] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input22
[    5.879656] intel_tcc_cooling: Programmable TCC Offset detected
[    5.928189] iwlwifi 0000:04:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[    5.928216] iwlwifi 0000:04:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    5.928234] iwlwifi 0000:04:00.0: WFPM_AUTH_KEY_0: 0x90
[    5.928252] iwlwifi 0000:04:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[    5.928643] iwlwifi 0000:04:00.0: loaded PNVM version e28bb9d7
[    5.944526] iwlwifi 0000:04:00.0: Detected RF GF, rfid=0x10d000
[    5.956266] intel_rapl_common: Found RAPL domain package
[    5.956268] intel_rapl_common: Found RAPL domain core
[    5.956269] intel_rapl_common: Found RAPL domain uncore
[    5.956269] intel_rapl_common: Found RAPL domain dram
[    5.983460] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    6.013466] iwlwifi 0000:04:00.0: base HW address: f8:b5:4d:d6:f8:71
[    6.055280] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d8:9e:f3:96:39:8e
[    6.055283] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    6.055383] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[    6.058946] e1000e 0000:00:1f.6 eno1: renamed from eth0
[    6.778693] EXT4-fs (sda3): mounted filesystem 25c3d5f9-ce04-4127-a4b2-efdb062ab55b r/w with ordered data mode. Quota mode: none.
[    6.801551] EXT4-fs (sda2): mounted filesystem c5e5bc30-62d1-477e-9c9f-baea117bbd34 r/w with ordered data mode. Quota mode: none.
[    7.036467] 8021q: 802.1Q VLAN Support v1.8
[    7.063843] iwlwifi 0000:04:00.0: WRT: Invalid buffer destination
[    7.217545] iwlwifi 0000:04:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[    7.217584] iwlwifi 0000:04:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    7.217617] iwlwifi 0000:04:00.0: WFPM_AUTH_KEY_0: 0x90
[    7.217663] iwlwifi 0000:04:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[    7.307555] iwlwifi 0000:04:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1
[   10.841009] wlan0: authenticate with f6:92:bf:95:38:98 (local address=f8:b5:4d:d6:f8:71)
[   10.842260] wlan0: send auth to f6:92:bf:95:38:98 (try 1/3)
[   10.872331] wlan0: authenticated
[   10.876284] wlan0: associate with f6:92:bf:95:38:98 (try 1/3)
[   10.879109] wlan0: RX AssocResp from f6:92:bf:95:38:98 (capab=0x11 status=0 aid=5)
[   10.887177] wlan0: associated
[   18.861806] systemd-journald[339]: /var/log/journal/113047646feb4cdaacf1a8ff22cd6ae4/user-1001.journal: Journal file uses a different sequence number ID, rotating.

Last edited by czarcastic_comment (2024-05-18 20:42:40)

Offline

#2 2024-05-18 20:41:42

czarcastic_comment
Member
Registered: 2024-05-17
Posts: 7

Re: [Solved] xorgxrdp server with xfce - X server could not be started

xorgxrdp-nvidia AUR package maintainer Jat's latest comment on the repo - https://aur.archlinux.org/packages/xorg … ent-955665 - is "The upstream made a lots of changes recently. I will fix it when it is stabilized." I switched to xorgxrdp (no nvidia) and I'm getting good enough performance. I'll mark it as solved with the solution to just not user the nvidia package.

Offline

Board footer

Powered by FluxBB