You are not logged in.

#1 2024-07-08 17:33:00

hay
Member
Registered: 2022-12-13
Posts: 13

[SOLVED] ERROR building clang10

Hello,

What I'm acutally trying to do is to run hashcat on Arch (or rather crack a bcrypt file (john failed, so trying hashcat)). To do this I think I need an OpenCL implementation for my CPU (would prefer to not use the GPU due to nvidia issues), and I found the beignet AUR. However I need clang10, which I'm currently in the process of building.

I clone the git from https://aur.archlinux.org/clang10.git and create with

 makepkg -si

Unfortunately I recieve

 ==> Starting prepare()...
mkdir: cannot create directory ‘build’: File exists
==> ERROR: A failure occurred in prepare().
    Aborting...

What might the problem be? Anything I can provide to further help debug the issue?

I have tried removing the folder and rebuilding to no avail.

While making this post I tried modifying the MAKEPKG with some... eh... not so smart modifications (change mkdir BUILD -> mkdir -p),  I then recieved the issue:

 ninja: build stopped: subcommand failed.
==> ERROR: A failure occurred in build().
    Aborting...

This error only occured once, now I get the first issue again when trying to run

 makepkg -si

Any and all help is appreciated
Thx

Last edited by hay (Yesterday 12:13:23)

Offline

#2 2024-07-08 17:35:17

Scimmia
Fellow
Registered: 2012-09-01
Posts: 12,079

Re: [SOLVED] ERROR building clang10

Clean your build dir, or build in a clean chroot.

For the second error, we need the actual error, not just the result of the error.

Offline

#3 2024-07-08 20:46:14

hay
Member
Registered: 2022-12-13
Posts: 13

Re: [SOLVED] ERROR building clang10

thanks for responding

I'm kinda in deep waters here as I don't know what I'm doing entirely...

I' havent built with in a clean chroot before...  I'm trying to follow the instructions over at DeveloperWiki:Building_in_a_clean_chroot.

When I run

 makechrootpkg -c -r $CHROOT 

inside of the clang10 directory

I end up with some missing dependencies

==> ERROR: 'pacman' failed to install missing dependencies.
==> Missing dependencies:
  -> llvm10
  -> cmake
  -> ninja
  -> python-sphinx
  -> python2

However all of those are already installed.

I try to pre-install them with

$ makechrootpkg -c -r $CHROOT -I ninja-1.12.1-1-x86_64.pkg.tar.zst -I python2-2.7.18-8-x86_64.pkg.tar.zst -I python-sphinx-7.3.7-2-any.pkg.tar.zst -I llvm-10.0.1.src.tar.xz -I cmake-3.30.0-1-x86_64.pkg.tar.zst -I llvm10-libs-10.0.1-3-x86_64.pkg.tar.zst
 

?

But I get

...snip
/usr/src/debug/clang10/clang-10.0.1.src/utils/TableGen/ClangDiagnosticsEmitter.cpp:638:(.text._ZNK12_GLOBAL__N_121DiagnosticTextBuilder15PrintFatalErrorERKN4llvm5TwineE.isra.0+0x1a): undefined reference to `llvm::PrintFatalError(llvm::ArrayRef<llvm::SMLoc>, llvm::Twine const&)'
/usr/bin/ld: /tmp/ccNDQlMi.ltrans12.ltrans.o: in function `llvm::SmallVectorImpl<llvm::Init*>::operator=(llvm::SmallVectorImpl<llvm::Init*> const&) [clone .isra.0]':
/opt/llvm10/include/llvm/ADT/SmallVector.h:98:(.text._ZN4llvm15SmallVectorImplIPNS_4InitEEaSERKS3_.isra.0+0xd5): undefined reference to `llvm::SmallVectorBase::grow_pod(void*, unsigned long, unsigned long)'
/usr/bin/ld: /tmp/ccNDQlMi.ltrans12.ltrans.o: in function `(anonymous namespace)::ASTPropsEmitter::Validator::validateType(clang::tblgen::PropertyType, clang::tblgen::WrappedRecord) [clone .isra.0]':
/usr/src/debug/clang10/clang-10.0.1.src/utils/TableGen/ASTTableGen.h:265:(.text._ZN12_GLOBAL__N_115ASTPropsEmitter9Validator12validateTypeEN5clang6tblgen12PropertyTypeENS3_13WrappedRecordE.isra.0+0x3a): undefined reference to `llvm::Record::getValueAsString(llvm::StringRef) const'
/usr/bin/ld: /tmp/ccNDQlMi.ltrans12.ltrans.o: in function `(anonymous namespace)::ASTPropsEmitter::Validator::validateType(clang::tblgen::PropertyType, clang::tblgen::WrappedRecord) [clone .isra.0]':
/usr/src/debug/clang10/clang-10.0.1.src/utils/TableGen/ClangASTPropertiesEmitter.cpp:347:(.text._ZN12_GLOBAL__N_115ASTPropsEmitter9Validator12validateTypeEN5clang6tblgen12PropertyTypeENS3_13WrappedRecordE.isra.0+0xdb): undefined reference to `llvm::PrintError(llvm::ArrayRef<llvm::SMLoc>, llvm::Twine const&)'
/usr/bin/ld: /usr/src/debug/clang10/clang-10.0.1.src/utils/TableGen/ClangASTPropertiesEmitter.cpp:348:(.text._ZN12_GLOBAL__N_115ASTPropsEmitter9Validator12validateTypeEN5clang6tblgen12PropertyTypeENS3_13WrappedRecordE.isra.0+0x115): undefined reference to `llvm::PrintNote(llvm::ArrayRef<llvm::SMLoc>, llvm::Twine const&)'
/usr/bin/ld: /tmp/ccNDQlMi.ltrans12.ltrans.o: in function `(anonymous namespace)::ASTPropsEmitter::Validator::validateType(clang::tblgen::PropertyType, clang::tblgen::WrappedRecord) [clone .isra.0]':
/usr/src/debug/clang10/clang-10.0.1.src/utils/TableGen/ASTTableGen.h:283:(.text._ZN12_GLOBAL__N_115ASTPropsEmitter9Validator12validateTypeEN5clang6tblgen12PropertyTypeENS3_13WrappedRecordE.isra.0+0x149): undefined reference to `llvm::Record::getValueAsDef(llvm::StringRef) const'
/usr/bin/ld: /usr/src/debug/clang10/clang-10.0.1.src/utils/TableGen/ASTTableGen.h:283:(.text._ZN12_GLOBAL__N_115ASTPropsEmitter9Validator12validateTypeEN5clang6tblgen12PropertyTypeENS3_13WrappedRecordE.isra.0+0x191): undefined reference to `llvm::Record::getValueAsDef(llvm::StringRef) const'
/usr/bin/ld: /usr/src/debug/clang10/clang-10.0.1.src/utils/TableGen/ASTTableGen.h:314:(.text._ZN12_GLOBAL__N_115ASTPropsEmitter9Validator12validateTypeEN5clang6tblgen12PropertyTypeENS3_13WrappedRecordE.isra.0+0x1bd): undefined reference to `llvm::Record::getValueAsString(llvm::StringRef) const'
/usr/bin/ld: /tmp/ccNDQlMi.ltrans12.ltrans.o: in function `(anonymous namespace)::ASTPropsEmitter::Validator::validateType(clang::tblgen::PropertyType, clang::tblgen::WrappedRecord) [clone .isra.0]':
/usr/src/debug/clang10/clang-10.0.1.src/utils/TableGen/ClangASTPropertiesEmitter.cpp:342:(.text._ZN12_GLOBAL__N_115ASTPropsEmitter9Validator12validateTypeEN5clang6tblgen12PropertyTypeENS3_13WrappedRecordE.isra.0+0x1fd): undefined reference to `llvm::PrintError(llvm::ArrayRef<llvm::SMLoc>, llvm::Twine const&)'
/usr/bin/ld: /tmp/ccNDQlMi.ltrans12.ltrans.o: in function `(anonymous namespace)::ASTPropsEmitter::Validator::validateType(clang::tblgen::PropertyType, clang::tblgen::WrappedRecord) [clone .isra.0]':
/usr/src/debug/clang10/clang-10.0.1.src/utils/TableGen/ASTTableGen.h:318:(.text._ZN12_GLOBAL__N_115ASTPropsEmitter9Validator12validateTypeEN5clang6tblgen12PropertyTypeENS3_13WrappedRecordE.isra.0+0x241): undefined reference to `llvm::Record::getValueAsString(llvm::StringRef) const'
collect2: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
==> ERROR: A failure occurred in build().
    Aborting...
==> ERROR: Build failed, check /home/hay/chroot/ojo/build

Offline

#4 2024-07-08 21:50:16

loqs
Member
Registered: 2014-03-06
Posts: 18,032

Re: [SOLVED] ERROR building clang10

Have you tried building llvm10 with LTO disabled? https://aur.archlinux.org/packages/llvm … ent-897984
Edit:
Instead of disabling LTO using fat lto objects appears to work:
diff for llvm10

diff --git a/PKGBUILD b/PKGBUILD
index ae7e00f..f24ea75 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -30,6 +30,8 @@ prepare() {
 }
 
 build() {
+  CFLAGS+=' -ffat-lto-objects'
+  CXXFLAGS+=' -ffat-lto-objects'
   cd "$srcdir/llvm-$pkgver.src/build"
 
   cmake .. -G Ninja \

diff for clang10 (clang10 will build without these changes but beignet might need the LTO changes,  the python2 changes were so I could avoid building it)

diff --git a/PKGBUILD b/PKGBUILD
index cd742cb..f1f9067 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -10,7 +10,7 @@ arch=('x86_64')
 url="https://clang.llvm.org/"
 license=('custom:Apache 2.0 with LLVM Exception')
 depends=('llvm10-libs' 'gcc' 'compiler-rt')
-makedepends=('llvm10' 'cmake' 'ninja' 'python-sphinx' 'python2')
+makedepends=('llvm10' 'cmake' 'ninja' 'python-sphinx') # 'python2')
 optdepends=('openmp: OpenMP support in clang with -fopenmp'
             'python: for scan-view and git-clang-format'
             'llvm: referenced by some clang headers')
@@ -61,6 +61,8 @@ prepare() {
 }
 
 build() {
+  CFLAGS+=' -ffat-lto-objects'
+  CXXFLAGS+=' -ffat-lto-objects'
   cd "$srcdir/$_pkgname-$pkgver.src/build"
 
   export PATH=/opt/llvm10/bin:$PATH
@@ -117,7 +119,7 @@ package() {
   sed -i 's|libexec|lib/clang|' "$pkgdir/opt/llvm10/bin/scan-build"
 
   # Install Python bindings
-  for _py in 2.7 3.8; do
+  for _py in 3.12; do
     install -d "$pkgdir/opt/llvm10/lib/python$_py/site-packages"
     cp -a ../bindings/python/clang "$pkgdir/opt/llvm10/lib/python$_py/site-packages/"
     _python${_py%%.*}_optimize "$pkgdir/opt/llvm10/lib/python$_py"
@@ -129,7 +131,7 @@ package() {
   touch -d @$SOURCE_DATE_EPOCH "$pkgdir"/opt/llvm10/share/$_pkgname/run-find-all-symbols.py
 
   # Compile Python scripts
-  _python2_optimize "$pkgdir/opt/llvm10/share/clang"
+#  _python2_optimize "$pkgdir/opt/llvm10/share/clang"
   _python3_optimize "$pkgdir/opt/llvm10/share" -x 'clang-include-fixer|run-find-all-symbols'
 }
 

Last edited by loqs (2024-07-08 23:17:07)

Offline

#5 2024-07-09 12:12:10

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 12,926

Re: [SOLVED] ERROR building clang10

hay wrote:

I try to pre-install them with

$ makechrootpkg -c -r $CHROOT -I ninja-1.12.1-1-x86_64.pkg.tar.zst -I python2-2.7.18-8-x86_64.pkg.tar.zst -I python-sphinx-7.3.7-2-any.pkg.tar.zst -I llvm-10.0.1.src.tar.xz -I cmake-3.30.0-1-x86_64.pkg.tar.zst -I llvm10-libs-10.0.1-3-x86_64.pkg.tar.zst

Programs that are in repos don't need to be added with -I , but you made in error in the command .

Removing the entries that are in repos to mke the error stand out more

-I python2-2.7.18-8-x86_64.pkg.tar.zst -I llvm-10.0.1.src.tar.xz -I llvm10-libs-10.0.1-3-x86_64.pkg.tar.zst

Hay, please take a good look and tell us what the error is.


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Online

#6 2024-07-11 15:28:45

hay
Member
Registered: 2022-12-13
Posts: 13

Re: [SOLVED] ERROR building clang10

Thanks to everyone for replying.

I found out that I' was in need of the package

 pocl 6.0-2 

for hashcat to function.

So my original problem is kinda sorted.

For the thread itself.. I have not managed to properly install clang10.

I followed loqs instructions and modified the PKGBUILD file per his instructions, but during makepkg -si first the web browser crashes, before terminal eventually crashes. Multiple attempts tried.

Lone_Wolf wrote:

Removing the entries that are in repos to mke the error stand out more

-I python2-2.7.18-8-x86_64.pkg.tar.zst -I llvm-10.0.1.src.tar.xz -I llvm10-libs-10.0.1-3-x86_64.pkg.tar.zst

Hay, please take a good look and tell us what the error is.

I tried using .src instead of .pkg it seems like.

Note: I tried creating the makepkg -si in normal mode again instead of a clean chroot...

I will update if a clean chroot install helps solve the problem after modifying the PKGBUILD file.

Offline

#7 2024-07-12 15:43:23

loqs
Member
Registered: 2014-03-06
Posts: 18,032

Re: [SOLVED] ERROR building clang10

Was there anything in the journal after the crashes that might indicate the causes?

Offline

#8 2024-07-31 23:54:38

fspkwon
Member
Registered: 2024-07-31
Posts: 4

Re: [SOLVED] ERROR building clang10

this said blah blah im a horrible reader <-
although i did learn a bit about cmake <-

Last edited by fspkwon (2024-08-04 03:38:00)

Offline

#9 2024-08-01 00:03:31

loqs
Member
Registered: 2014-03-06
Posts: 18,032

Re: [SOLVED] ERROR building clang10

Both disabling LTO and applying the diff I provided worked for me. Please post the PKGBUILD if you have made any changes from clang10 along with the invocation of makepkg you used and its full output.

Offline

#10 2024-08-01 00:34:22

fspkwon
Member
Registered: 2024-07-31
Posts: 4

Re: [SOLVED] ERROR building clang10

this one said blah blah blah let me try to fix it myself whether i was right or not -crunch- the world will never know

Last edited by fspkwon (2024-08-04 03:38:28)

Offline

#11 2024-08-01 00:40:52

loqs
Member
Registered: 2014-03-06
Posts: 18,032

Re: [SOLVED] ERROR building clang10

Do either of the solutions I have provided work for you?

Offline

#12 2024-08-03 17:17:46

fspkwon
Member
Registered: 2024-07-31
Posts: 4

Re: [SOLVED] ERROR building clang10

ill see if thats what and try to help with the issue <- yeah it works after building it with a 20gb tmpfs my swap partitions 40gb and have 16gb ram : so the patch and needs a bigger tmpfs than usual: so follow that little edit ruling out python and changing the useflags <- and then make a bigger tmpfs and itll build just fine ill go ahead and test beignet since thats where i think people were complaining from: beignet has built perfectly fine: now as for that guy giving me the stare over there<-..... lol whats wrong with xnine-git now..
tmpfs        /tmp        tmpfs        rw,nodev,nosuid,size=20G    0 0

Last edited by fspkwon (2024-08-04 03:41:43)

Offline

#13 Yesterday 12:15:13

hay
Member
Registered: 2022-12-13
Posts: 13

Re: [SOLVED] ERROR building clang10

Retried and package created succesfully with

 makepkg -Si 

 ==> Source package created: clang10 (Wed 20 Nov 2024 01:10:30 PM CET) 

Offline

#14 Yesterday 13:01:24

loqs
Member
Registered: 2014-03-06
Posts: 18,032

Re: [SOLVED] ERROR building clang10

 makepkg -Si 

Did you intend to build a source package or did you mistype

 makepkg -si

Offline

Board footer

Powered by FluxBB