You are not logged in.
Pages: 1
Hi, I'm trying to install liquidctl-git so my liquid cooler (NZXT Kraken Elite) will run.
I've installed it a couple times before successfully but I'm having some difficulty now and I suspect it's due to my sensors.
It appears to be returning nct6687 twice. The first time shows sensors incorrectly named; `VIN0, VIN1, VCC`, etc. The second time it says there are kernal interface errors.
[lojith@overlord nct6687d]$ sensors
hidpp_battery_0-hid-3-a
Adapter: HID adapter
in0: 3.92 V
mt7921_phy0-pci-0d00
Adapter: PCI adapter
temp1: +38.0°C
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +47.6°C
Tccd1: +33.1°C
Tccd2: +34.8°C
nvme-pci-0200
Adapter: PCI adapter
Composite: +40.9°C (low = -273.1°C, high = +81.8°C)
(crit = +84.8°C)
Sensor 1: +40.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +44.9°C (low = -273.1°C, high = +65261.8°C)
nct6687-isa-0a20
Adapter: ISA adapter
VIN0: 992.00 mV (min = +0.00 V, max = +0.00 V)
VIN1: 1.01 V (min = +0.00 V, max = +0.00 V)
VIN2: 944.00 mV (min = +0.00 V, max = +0.00 V)
VIN3: 544.00 mV (min = +0.00 V, max = +0.00 V)
VIN4: 576.00 mV (min = +0.00 V, max = +0.00 V)
VIN5: 240.00 mV (min = +0.00 V, max = +0.00 V)
VIN6: 784.00 mV (min = +0.00 V, max = +0.00 V)
VIN7: 1.54 V (min = +0.00 V, max = +0.00 V)
VCC: 3.31 V (min = +0.00 V, max = +0.00 V)
VSB: 3.33 V (min = +0.00 V, max = +0.00 V)
AVSB: 3.33 V (min = +0.00 V, max = +0.00 V)
VTT: 2.03 V (min = +0.00 V, max = +0.00 V)
VBAT: 3.26 V (min = +0.00 V, max = +0.00 V)
VREF: 0.00 V (min = +0.00 V, max = +0.00 V)
fan1: 1351 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
fan6: 1283 RPM (min = 0 RPM)
fan7: 0 RPM (min = 0 RPM)
fan8: 0 RPM (min = 0 RPM)
fan9: 0 RPM (min = 0 RPM)
fan10: 0 RPM (min = 0 RPM)
AMD TSI Addr 98h: +47.0°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = AMD AMDSI
Diode 0 (curr): +40.5°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = thermal diode
Thermistor 15: +36.0°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = thermistor
Thermistor 1: +37.5°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = thermistor
Thermistor 16: +35.0°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = thermistor
Thermistor 0: +79.0°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = thermistor
intrusion0: ALARM
beep_enable: disabled
nct6687-isa-0a20
Adapter: ISA adapter
+12V: 12.07 V (min = +12.07 V, max = +12.07 V)
+5V: 5.05 V (min = +5.05 V, max = +5.06 V)
+3.3V: 3.33 V (min = +0.00 V, max = +3.33 V)
CPU Soc: 950.00 mV (min = +0.95 V, max = +0.95 V)
CPU Vcore: 586.00 mV (min = +0.53 V, max = +0.97 V)
CPU 1P8: 0.00 V (min = +0.00 V, max = +0.00 V)
CPU VDDP: 0.00 V (min = +0.00 V, max = +0.00 V)
DRAM: 1.11 V (min = +1.11 V, max = +1.11 V)
Chipset: 244.00 mV (min = +0.23 V, max = +0.28 V)
CPU SA: 794.00 mV (min = +0.78 V, max = +0.79 V)
Voltage #2: 1.54 V (min = +1.54 V, max = +1.54 V)
AVCC3: 3.31 V (min = +3.30 V, max = +3.32 V)
AVSB: 3.33 V (min = +0.00 V, max = +3.33 V)
VBat: 2.04 V (min = +0.00 V, max = +2.04 V)
CPU Fan: 1351 RPM (min = 1141 RPM)
Pump Fan: 0 RPM (min = 0 RPM)
System Fan #1: 0 RPM (min = 0 RPM)
System Fan #2: 0 RPM (min = 0 RPM)
System Fan #3: 0 RPM (min = 0 RPM)
System Fan #4: 1283 RPM (min = 1219 RPM)
System Fan #5: 0 RPM (min = 0 RPM)
System Fan #6: 0 RPM (min = 0 RPM)
ERROR: Can't get value of subfeature fan9_input: Kernel interface error
ERROR: Can't get value of subfeature fan9_min: Kernel interface error
fan9: N/A (min = 0 RPM)
ERROR: Can't get value of subfeature fan10_input: Kernel interface error
ERROR: Can't get value of subfeature fan10_min: Kernel interface error
fan10: N/A (min = 0 RPM)
ERROR: Can't get value of subfeature temp1_max_hyst: Kernel interface error
ERROR: Can't get value of subfeature temp1_crit: Kernel interface error
CPU: +47.0°C (low = +44.0°C)
(high = +63.0°C, hyst = +0.0°C)
ERROR: Can't get value of subfeature temp1_type: Kernel interface error
(crit = +0.0°C) sensor = disabled
ERROR: Can't get value of subfeature temp2_max_hyst: Kernel interface error
ERROR: Can't get value of subfeature temp2_crit: Kernel interface error
System: +40.5°C (low = +40.5°C)
(high = +41.0°C, hyst = +0.0°C)
ERROR: Can't get value of subfeature temp2_type: Kernel interface error
(crit = +0.0°C) sensor = disabled
ERROR: Can't get value of subfeature temp3_max_hyst: Kernel interface error
ERROR: Can't get value of subfeature temp3_crit: Kernel interface error
VRM MOS: +36.0°C (low = +36.0°C)
(high = +39.0°C, hyst = +0.0°C)
ERROR: Can't get value of subfeature temp3_type: Kernel interface error
(crit = +0.0°C) sensor = disabled
ERROR: Can't get value of subfeature temp4_max_hyst: Kernel interface error
ERROR: Can't get value of subfeature temp4_crit: Kernel interface error
PCH: +37.5°C (low = +37.5°C)
(high = +38.0°C, hyst = +0.0°C)
ERROR: Can't get value of subfeature temp4_type: Kernel interface error
(crit = +0.0°C) sensor = disabled
ERROR: Can't get value of subfeature temp5_max_hyst: Kernel interface error
ERROR: Can't get value of subfeature temp5_crit: Kernel interface error
CPU Socket: +35.0°C (low = +35.0°C)
(high = +39.0°C, hyst = +0.0°C)
ERROR: Can't get value of subfeature temp5_type: Kernel interface error
(crit = +0.0°C) sensor = disabled
ERROR: Can't get value of subfeature temp6_max_hyst: Kernel interface error
ERROR: Can't get value of subfeature temp6_crit: Kernel interface error
PCIe x1: +79.0°C (low = +78.5°C)
(high = +80.0°C, hyst = +0.0°C)
ERROR: Can't get value of subfeature temp6_type: Kernel interface error
(crit = +0.0°C) sensor = disabled
amdgpu-pci-1000
Adapter: PCI adapter
vddgfx: 1.18 V
vddnb: 945.00 mV
edge: +41.0°C
PPT: 36.25 W Attempting to install liquidctl-git returns the error message:
raise ValueError("The device has no langid"
ValueError: The device has no langid (permission issue, no string descriptors supported or device error)
==> ERROR: A failure occurred in check().
Aborting...I'm at a bit of a loss on how to proceed so any advice would be dandy.
Operating System: Arch Linux
KDE Plasma Version: 6.1.3
KDE Frameworks Version: 6.4.0
Qt Version: 6.7.2
Kernel Version: 6.9.10-arch1-1 (64-bit)
Graphics Platform: X11
Processors: 24 × AMD Ryzen 9 7900X 12-Core Processor
Memory: 62.0 GiB of RAM
Graphics Processor: NVIDIA GeForce RTX 4090/PCIe/SSE2
Manufacturer: Micro-Star International Co., Ltd.
Product Name: MS-7D75
System Version: 1.0Offline
Pages: 1