You are not logged in.

Pages: 1

#1 2024-08-04 18:52:45

Toad39
Member
Registered: 2020-07-06
Posts: 60

No signal when trying to wake from sleep

I am using KDE Plasma on Xorg with Intel Integrated Graphics on a Dell XPS 8930.

Sometimes when my computer automatically goes to sleep, there is no signal when I try to wake it up. When I manually put it to sleep, the power button starts flashing slowly, but this does not happen in this case.

Below is the end of the output for `journalctl -b -1`.

Aug 04 10:31:05 neutron caffeine[89249]: No property specified.
Aug 04 10:31:15 neutron caffeine[89280]: No property specified.
Aug 04 10:31:25 neutron caffeine[89290]: No property specified.
Aug 04 10:32:11 neutron kscreenlocker_greet[89355]: qt.virtualkeyboard.hunspell: Hunspell dictionary is missing for "en_US". Search paths QList("/usr/share/qt6/qtvirtualkeyboard/hunspell", "/usr/share/hunspell", "/usr/share/myspell/dicts")
Aug 04 10:32:11 neutron kscreenlocker_greet[89355]: qt.virtualkeyboard.hunspell: Hunspell dictionary is missing for "en_US". Search paths QList("/usr/share/qt6/qtvirtualkeyboard/hunspell", "/usr/share/hunspell", "/usr/share/myspell/dicts")
Aug 04 10:32:44 neutron org_kde_powerdevil[22507]: Emitting DDCA_Display_Status_Event( 91690.896:  DDCA_EVENT_DPMS_ASLEEP, card1-DP-1, dref: Display_Ref[bus /dev/i2c-3], io_path:/dev/i2c-3]
Aug 04 10:32:44 neutron org_kde_powerdevil[22507]: Executed 1 registered callbacks.
Aug 04 10:32:44 neutron org_kde_powerdevil[22507]: Emitting DDCA_Display_Status_Event( 91690.896:  DDCA_EVENT_DPMS_ASLEEP, card1-HDMI-A-2, dref: Display_Ref[bus /dev/i2c-2], io_path:/dev/i2c-2]
Aug 04 10:32:44 neutron org_kde_powerdevil[22507]: Executed 1 registered callbacks.
Aug 04 10:34:48 neutron kernel: usb 1-11: USB disconnect, device number 12
Aug 04 10:47:10 neutron systemd-logind[668]: The system will suspend now!
Aug 04 10:47:10 neutron systemd[1]: Reached target Sleep.
Aug 04 10:47:10 neutron systemd[1]: Starting System Suspend...
Aug 04 10:47:10 neutron systemd-sleep[90056]: Successfully froze unit 'user.slice'.
Aug 04 10:47:10 neutron systemd-sleep[90056]: Performing sleep operation 'suspend'...

Any help would be appreciated

Last edited by Toad39 (2024-09-26 03:46:49)

Offline

#2 2024-08-05 20:14:15

Toad39
Member
Registered: 2020-07-06
Posts: 60

Re: No signal when trying to wake from sleep

One one of the threads I was looking at, someone asked to check /proc/acpi/wakeup. Not sure what to do with that, but here it is:

Device  S-state   Status   Sysfs node
PEG0      S4    *enabled   pci:0000:00:01.0
PEGP      S4    *disabled
PEG1      S4    *disabled
PEGP      S4    *disabled
PEG2      S4    *disabled
PEGP      S4    *disabled
SIO1      S3    *disabled  pnp:00:01
RP09      S4    *enabled   pci:0000:00:1d.0
PXSX      S4    *disabled  pci:0000:70:00.0
RP10      S4    *disabled
PXSX      S4    *disabled
RP11      S4    *disabled
PXSX      S4    *disabled
RP12      S4    *disabled
PXSX      S4    *disabled
RP13      S4    *disabled
PXSX      S4    *disabled
RP01      S4    *disabled
PXSX      S4    *disabled
RP05      S4    *disabled  pci:0000:00:1c.4
PXSX      S4    *disabled
RP06      S4    *disabled
PXSX      S4    *disabled
RP07      S4    *disabled
PXSX      S4    *disabled
RP08      S4    *disabled
PXSX      S4    *disabled
RP17      S4    *disabled
PXSX      S4    *disabled
RP18      S4    *disabled
PXSX      S4    *disabled
RP19      S4    *disabled
PXSX      S4    *disabled
RP20      S4    *disabled
PXSX      S4    *disabled
RP21      S4    *disabled
PXSX      S4    *disabled
RP22      S4    *disabled
PXSX      S4    *disabled
RP23      S4    *disabled
PXSX      S4    *disabled
RP24      S4    *disabled
PXSX      S4    *disabled
RP14      S4    *disabled
PXSX      S4    *disabled
RP15      S4    *disabled
PXSX      S4    *disabled
RP16      S4    *disabled
PXSX      S4    *disabled
RP02      S4    *enabled   pci:0000:00:1c.0
PXSX      S4    *enabled   pci:0000:02:00.0
RP03      S0    *enabled   pci:0000:00:1c.2
PXSX      S0    *disabled  pci:0000:03:00.0
RP04      S0    *enabled   pci:0000:00:1c.3
PXSX      S0    *disabled  pci:0000:04:00.0
GLAN      S4    *disabled
XHC       S4    *enabled   pci:0000:00:14.0
XDCI      S4    *disabled
HDAS      S4    *disabled  pci:0000:00:1f.3

Offline

#3 2024-08-05 21:51:43

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,805

Re: No signal when trying to wake from sleep

https://aur.archlinux.org/packages/caffeine ?
How does the systemd "automatically goes to sleep"?

The subject says "wake" but the post say " when my computer automatically goes to sleep, it shows a black screen" - so is this when the system is supposed to sleep or after you trying to wake it?

When you wake it, can you switch the VT (ctrl+alt+F3)? Or ping it? (Or bettter: ssh into it)

Also

Xorg with Intel Integrated Graphics

but there seems to be something in the PEG slot?
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#4 2024-09-26 03:54:22

Toad39
Member
Registered: 2020-07-06
Posts: 60

Re: No signal when trying to wake from sleep

Sorry for the late response and miscommunication, but there is actually no signal at all, not just a black screen.

The computer is automatically going to sleep through a setting in Plasma. I use caffeine to prevent it from going to sleep with audio, I will try disabling that for a while and seeing if anything happens.

I cannot ping or ssh into the computer when this happens. I need to force-restart the computer by holding the power button in order to make it responsive again.

I am not sure what PEG0 is, but I don't have a dGPU installed. Here is the output of lspci:

00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 0d)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 0d)
00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630] (rev 02)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1
00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #2 (rev f0)
00:1c.2 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #3 (rev f0)
00:1c.3 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #4 (rev f0)
00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0)
00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #9 (rev f0)
00:1e.0 Signal processing controller: Intel Corporation 200 Series/Z370 Chipset Family Serial IO UART Controller #0
00:1f.0 ISA bridge: Intel Corporation Z370 Chipset LPC/eSPI Controller
00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
02:00.0 USB controller: ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller
03:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a)
04:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)
70:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller 980 (DRAM-less)

Here is my Xorg..log.old:

[     5.247] 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[     5.247] Current Operating System: Linux neutron 6.10.7-arch1-1 #1 SMP PREEMPT_DYNAMIC Thu, 29 Aug 2024 16:48:57 +0000 x86_64
[     5.247] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root="UUID=9f771011-9a78-440a-9675-b403967154ca" rw atkbd.reset
[     5.247]  
[     5.247] Current version of pixman: 0.43.4
[     5.247] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.247] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.247] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 25 15:38:58 2024
[     5.248] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.248] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.249] (==) No Layout section.  Using the first Screen section.
[     5.249] (==) No screen section available. Using defaults.
[     5.249] (**) |-->Screen "Default Screen Section" (0)
[     5.249] (**) |   |-->Monitor "<default monitor>"
[     5.249] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.249] (**) Allowing byte-swapped clients
[     5.249] (==) Automatically adding devices
[     5.249] (==) Automatically enabling devices
[     5.249] (==) Automatically adding GPU devices
[     5.249] (==) Automatically binding GPU devices
[     5.249] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.249] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     5.249] 	Entry deleted from font path.
[     5.250] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[     5.250] 	Entry deleted from font path.
[     5.250] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[     5.250] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     5.250] 	Entry deleted from font path.
[     5.250] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.250] 	Entry deleted from font path.
[     5.250] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     5.250] 	Entry deleted from font path.
[     5.250] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     5.250] 	Entry deleted from font path.
[     5.250] (==) FontPath set to:
	
[     5.250] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.250] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.250] (II) Module ABI versions:
[     5.250] 	X.Org ANSI C Emulation: 0.4
[     5.250] 	X.Org Video Driver: 25.2
[     5.250] 	X.Org XInput driver : 24.4
[     5.250] 	X.Org Server Extension : 10.0
[     5.250] (++) using VT number 7

[     5.250] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.250] (II) xfree86: Adding drm device (/dev/dri/card1)
[     5.250] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[     5.268] (--) PCI:*(0@0:2:0) 8086:3e98:1028:0859 rev 2, Mem @ 0x2ffe000000/16777216, 0x2fa0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     5.268] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.268] (II) LoadModule: "glx"
[     5.269] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.275] (II) Module glx: vendor="X.Org Foundation"
[     5.275] 	compiled for 1.21.1.13, module version = 1.0.0
[     5.275] 	ABI class: X.Org Server Extension, version 10.0
[     5.275] (==) Matched intel as autoconfigured driver 0
[     5.275] (==) Matched modesetting as autoconfigured driver 1
[     5.275] (==) Matched fbdev as autoconfigured driver 2
[     5.275] (==) Matched vesa as autoconfigured driver 3
[     5.275] (==) Assigned the driver to the xf86ConfigLayout
[     5.275] (II) LoadModule: "intel"
[     5.275] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.277] (II) Module intel: vendor="X.Org Foundation"
[     5.277] 	compiled for 1.21.1.11, module version = 2.99.917
[     5.277] 	Module class: X.Org Video Driver
[     5.277] 	ABI class: X.Org Video Driver, version 25.2
[     5.277] (II) LoadModule: "modesetting"
[     5.277] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.348] (II) Module modesetting: vendor="X.Org Foundation"
[     5.348] 	compiled for 1.21.1.13, module version = 1.21.1
[     5.348] 	Module class: X.Org Video Driver
[     5.348] 	ABI class: X.Org Video Driver, version 25.2
[     5.348] (II) LoadModule: "fbdev"
[     5.349] (WW) Warning, couldn't open module fbdev
[     5.349] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     5.349] (II) LoadModule: "vesa"
[     5.349] (WW) Warning, couldn't open module vesa
[     5.349] (EE) Failed to load module "vesa" (module does not exist, 0)
[     5.349] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     5.349] (II) intel: Driver for Intel(R) HD Graphics
[     5.349] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     5.349] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     5.349] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.351] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20230929
[     5.351] (II) intel(0): SNA compiled from 2.99.917-923-gb74b67f0
[     5.352] (WW) Falling back to old probe method for modesetting
[     5.352] (EE) open /dev/dri/card0: No such file or directory
[     5.352] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[     5.352] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 6 threads
[     5.352] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.352] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     5.352] (==) intel(0): RGB weight 888
[     5.352] (==) intel(0): Default visual is TrueColor
[     5.352] (II) intel(0): Output DP1 has no monitor section
[     5.352] (II) intel(0): Enabled output DP1
[     5.352] (II) intel(0): Output HDMI1 has no monitor section
[     5.353] (II) intel(0): Enabled output HDMI1
[     5.353] (II) intel(0): Output HDMI2 has no monitor section
[     5.353] (II) intel(0): Enabled output HDMI2
[     5.353] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     5.353] (II) intel(0): Output VIRTUAL1 has no monitor section
[     5.353] (II) intel(0): Enabled output VIRTUAL1
[     5.353] (--) intel(0): Output DP1 using initial mode 1920x1080 on pipe 0
[     5.353] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 1
[     5.353] (==) intel(0): TearFree enabled
[     5.353] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.353] (==) intel(0): DPI set to (96, 96)
[     5.353] (II) Loading sub module "dri3"
[     5.353] (II) LoadModule: "dri3"
[     5.353] (II) Module "dri3" already built-in
[     5.353] (II) Loading sub module "dri2"
[     5.353] (II) LoadModule: "dri2"
[     5.353] (II) Module "dri2" already built-in
[     5.353] (II) Loading sub module "present"
[     5.353] (II) LoadModule: "present"
[     5.353] (II) Module "present" already built-in
[     5.353] (II) UnloadModule: "modesetting"
[     5.353] (II) Unloading modesetting
[     5.354] (II) intel(0): SNA initialized with Coffeelake (gen9) backend
[     5.354] (==) intel(0): Backing store enabled
[     5.354] (==) intel(0): Silken mouse enabled
[     5.355] (II) intel(0): HW Cursor enabled
[     5.355] (==) intel(0): DPMS enabled
[     5.355] (==) intel(0): Display hotplug detection enabled
[     5.355] (II) intel(0): [DRI2] Setup complete
[     5.355] (II) intel(0): [DRI2]   DRI driver: i965
[     5.355] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     5.355] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[     5.355] (II) intel(0): hardware support for Present enabled
[     5.355] (II) Initializing extension Generic Event Extension
[     5.355] (II) Initializing extension SHAPE
[     5.355] (II) Initializing extension MIT-SHM
[     5.355] (II) Initializing extension XInputExtension
[     5.356] (II) Initializing extension XTEST
[     5.356] (II) Initializing extension BIG-REQUESTS
[     5.356] (II) Initializing extension SYNC
[     5.356] (II) Initializing extension XKEYBOARD
[     5.356] (II) Initializing extension XC-MISC
[     5.356] (II) Initializing extension SECURITY
[     5.356] (II) Initializing extension XFIXES
[     5.356] (II) Initializing extension RENDER
[     5.356] (II) Initializing extension RANDR
[     5.356] (II) Initializing extension COMPOSITE
[     5.356] (II) Initializing extension DAMAGE
[     5.356] (II) Initializing extension MIT-SCREEN-SAVER
[     5.356] (II) Initializing extension DOUBLE-BUFFER
[     5.357] (II) Initializing extension RECORD
[     5.357] (II) Initializing extension DPMS
[     5.357] (II) Initializing extension Present
[     5.357] (II) Initializing extension DRI3
[     5.357] (II) Initializing extension X-Resource
[     5.357] (II) Initializing extension XVideo
[     5.357] (II) Initializing extension XVideo-MotionCompensation
[     5.357] (II) Initializing extension GLX
[     5.357] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[     5.357] (EE) AIGLX error: unable to load driver i965
[     5.389] (II) IGLX: Loaded and initialized swrast
[     5.389] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     5.389] (II) Initializing extension XFree86-VidModeExtension
[     5.390] (II) Initializing extension XFree86-DGA
[     5.390] (II) Initializing extension XFree86-DRI
[     5.390] (II) Initializing extension DRI2
[     5.392] (II) intel(0): switch to mode 1920x1080@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     5.400] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI2 using pipe 1, position (0, 0), rotation normal, reflection none
[     5.417] (II) intel(0): Setting screen physical size to 508 x 285
[     5.456] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     5.456] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.456] (**) Power Button: Applying InputClass "system-keyboard"
[     5.456] (II) LoadModule: "libinput"
[     5.456] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     5.459] (II) Module libinput: vendor="X.Org Foundation"
[     5.459] 	compiled for 1.21.1.13, module version = 1.4.0
[     5.459] 	Module class: X.Org XInput Driver
[     5.459] 	ABI class: X.Org XInput driver, version 24.4
[     5.459] (II) Using input driver 'libinput' for 'Power Button'
[     5.459] (**) Power Button: always reports core events
[     5.459] (**) Option "Device" "/dev/input/event2"
[     5.464] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     5.464] (II) event2  - Power Button: device is a keyboard
[     5.464] (II) event2  - Power Button: device removed
[     5.496] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     5.496] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.496] (**) Option "xkb_model" "pc104"
[     5.496] (**) Option "xkb_layout" "us"
[     5.496] (**) Option "xkb_options" "caps:ctrl_modifier"
[     5.537] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     5.537] (II) event2  - Power Button: device is a keyboard
[     5.538] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[     5.538] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.538] (**) Video Bus: Applying InputClass "system-keyboard"
[     5.538] (II) Using input driver 'libinput' for 'Video Bus'
[     5.538] (**) Video Bus: always reports core events
[     5.538] (**) Option "Device" "/dev/input/event8"
[     5.539] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[     5.539] (II) event8  - Video Bus: device is a keyboard
[     5.539] (II) event8  - Video Bus: device removed
[     5.583] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event8"
[     5.583] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.583] (**) Option "xkb_model" "pc104"
[     5.583] (**) Option "xkb_layout" "us"
[     5.583] (**) Option "xkb_options" "caps:ctrl_modifier"
[     5.585] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[     5.586] (II) event8  - Video Bus: device is a keyboard
[     5.587] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     5.587] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.587] (**) Power Button: Applying InputClass "system-keyboard"
[     5.587] (II) Using input driver 'libinput' for 'Power Button'
[     5.587] (**) Power Button: always reports core events
[     5.587] (**) Option "Device" "/dev/input/event1"
[     5.589] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     5.589] (II) event1  - Power Button: device is a keyboard
[     5.589] (II) event1  - Power Button: device removed
[     5.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     5.603] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     5.603] (**) Option "xkb_model" "pc104"
[     5.603] (**) Option "xkb_layout" "us"
[     5.603] (**) Option "xkb_options" "caps:ctrl_modifier"
[     5.605] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     5.605] (II) event1  - Power Button: device is a keyboard
[     5.607] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     5.607] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     5.607] (**) Sleep Button: Applying InputClass "system-keyboard"
[     5.607] (II) Using input driver 'libinput' for 'Sleep Button'
[     5.607] (**) Sleep Button: always reports core events
[     5.607] (**) Option "Device" "/dev/input/event0"
[     5.609] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     5.609] (II) event0  - Sleep Button: device is a keyboard
[     5.609] (II) event0  - Sleep Button: device removed
[     5.623] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     5.623] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     5.623] (**) Option "xkb_model" "pc104"
[     5.623] (**) Option "xkb_layout" "us"
[     5.623] (**) Option "xkb_options" "caps:ctrl_modifier"
[     5.625] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     5.625] (II) event0  - Sleep Button: device is a keyboard
[     5.628] (II) config/udev: Adding input device Dell KB216 Wired Keyboard (/dev/input/event3)
[     5.628] (**) Dell KB216 Wired Keyboard: Applying InputClass "libinput keyboard catchall"
[     5.628] (**) Dell KB216 Wired Keyboard: Applying InputClass "system-keyboard"
[     5.628] (II) Using input driver 'libinput' for 'Dell KB216 Wired Keyboard'
[     5.628] (**) Dell KB216 Wired Keyboard: always reports core events
[     5.628] (**) Option "Device" "/dev/input/event3"
[     5.631] (II) event3  - Dell KB216 Wired Keyboard: is tagged by udev as: Keyboard
[     5.632] (II) event3  - Dell KB216 Wired Keyboard: device is a keyboard
[     5.632] (II) event3  - Dell KB216 Wired Keyboard: device removed
[     5.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:413C:2113.0001/input/input3/event3"
[     5.656] (II) XINPUT: Adding extended input device "Dell KB216 Wired Keyboard" (type: KEYBOARD, id 10)
[     5.656] (**) Option "xkb_model" "pc104"
[     5.656] (**) Option "xkb_layout" "us"
[     5.656] (**) Option "xkb_options" "caps:ctrl_modifier"
[     5.660] (II) event3  - Dell KB216 Wired Keyboard: is tagged by udev as: Keyboard
[     5.660] (II) event3  - Dell KB216 Wired Keyboard: device is a keyboard
[     5.663] (II) config/udev: Adding input device Dell KB216 Wired Keyboard System Control (/dev/input/event4)
[     5.663] (**) Dell KB216 Wired Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[     5.663] (**) Dell KB216 Wired Keyboard System Control: Applying InputClass "system-keyboard"
[     5.663] (II) Using input driver 'libinput' for 'Dell KB216 Wired Keyboard System Control'
[     5.663] (**) Dell KB216 Wired Keyboard System Control: always reports core events
[     5.663] (**) Option "Device" "/dev/input/event4"
[     5.666] (II) event4  - Dell KB216 Wired Keyboard System Control: is tagged by udev as: Keyboard
[     5.666] (II) event4  - Dell KB216 Wired Keyboard System Control: device is a keyboard
[     5.666] (II) event4  - Dell KB216 Wired Keyboard System Control: device removed
[     5.693] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:413C:2113.0002/input/input4/event4"
[     5.693] (II) XINPUT: Adding extended input device "Dell KB216 Wired Keyboard System Control" (type: KEYBOARD, id 11)
[     5.693] (**) Option "xkb_model" "pc104"
[     5.693] (**) Option "xkb_layout" "us"
[     5.693] (**) Option "xkb_options" "caps:ctrl_modifier"
[     5.697] (II) event4  - Dell KB216 Wired Keyboard System Control: is tagged by udev as: Keyboard
[     5.697] (II) event4  - Dell KB216 Wired Keyboard System Control: device is a keyboard
[     5.699] (II) config/udev: Adding input device Dell KB216 Wired Keyboard Consumer Control (/dev/input/event5)
[     5.699] (**) Dell KB216 Wired Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[     5.699] (**) Dell KB216 Wired Keyboard Consumer Control: Applying InputClass "system-keyboard"
[     5.699] (II) Using input driver 'libinput' for 'Dell KB216 Wired Keyboard Consumer Control'
[     5.699] (**) Dell KB216 Wired Keyboard Consumer Control: always reports core events
[     5.699] (**) Option "Device" "/dev/input/event5"
[     5.702] (II) event5  - Dell KB216 Wired Keyboard Consumer Control: is tagged by udev as: Keyboard
[     5.703] (II) event5  - Dell KB216 Wired Keyboard Consumer Control: device is a keyboard
[     5.703] (II) event5  - Dell KB216 Wired Keyboard Consumer Control: device removed
[     5.776] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:413C:2113.0002/input/input5/event5"
[     5.776] (II) XINPUT: Adding extended input device "Dell KB216 Wired Keyboard Consumer Control" (type: KEYBOARD, id 12)
[     5.776] (**) Option "xkb_model" "pc104"
[     5.776] (**) Option "xkb_layout" "us"
[     5.776] (**) Option "xkb_options" "caps:ctrl_modifier"
[     5.780] (II) event5  - Dell KB216 Wired Keyboard Consumer Control: is tagged by udev as: Keyboard
[     5.780] (II) event5  - Dell KB216 Wired Keyboard Consumer Control: device is a keyboard
[     5.782] (II) config/udev: Adding input device Yubico YubiKey OTP+FIDO+CCID (/dev/input/event7)
[     5.782] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "libinput keyboard catchall"
[     5.782] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "system-keyboard"
[     5.782] (II) Using input driver 'libinput' for 'Yubico YubiKey OTP+FIDO+CCID'
[     5.783] (**) Yubico YubiKey OTP+FIDO+CCID: always reports core events
[     5.783] (**) Option "Device" "/dev/input/event7"
[     5.786] (II) event7  - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard
[     5.786] (II) event7  - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard
[     5.786] (II) event7  - Yubico YubiKey OTP+FIDO+CCID: device removed
[     5.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1050:0407.0004/input/input7/event7"
[     5.836] (II) XINPUT: Adding extended input device "Yubico YubiKey OTP+FIDO+CCID" (type: KEYBOARD, id 13)
[     5.836] (**) Option "xkb_model" "pc104"
[     5.836] (**) Option "xkb_layout" "us"
[     5.836] (**) Option "xkb_options" "caps:ctrl_modifier"
[     5.840] (II) event7  - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard
[     5.840] (II) event7  - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard
[     5.842] (II) config/udev: Adding input device DELL Laser Mouse (/dev/input/event6)
[     5.843] (**) DELL Laser Mouse: Applying InputClass "libinput pointer catchall"
[     5.843] (II) Using input driver 'libinput' for 'DELL Laser Mouse'
[     5.843] (**) DELL Laser Mouse: always reports core events
[     5.843] (**) Option "Device" "/dev/input/event6"
[     5.903] (II) event6  - DELL Laser Mouse: is tagged by udev as: Mouse
[     5.903] (II) event6  - DELL Laser Mouse: device is a pointer
[     5.903] (II) event6  - DELL Laser Mouse: device removed
[     5.976] (II) libinput: DELL Laser Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     5.976] (II) libinput: DELL Laser Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     5.976] (II) libinput: DELL Laser Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     5.976] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb3/3-1/3-1:1.0/0003:0461:4D51.0003/input/input6/event6"
[     5.976] (II) XINPUT: Adding extended input device "DELL Laser Mouse" (type: MOUSE, id 14)
[     5.977] (**) Option "AccelerationScheme" "none"
[     5.977] (**) DELL Laser Mouse: (accel) selected scheme none/0
[     5.977] (**) DELL Laser Mouse: (accel) acceleration factor: 2.000
[     5.977] (**) DELL Laser Mouse: (accel) acceleration threshold: 4
[     6.036] (II) event6  - DELL Laser Mouse: is tagged by udev as: Mouse
[     6.036] (II) event6  - DELL Laser Mouse: device is a pointer
[     6.038] (II) config/udev: Adding input device DELL Laser Mouse (/dev/input/mouse0)
[     6.039] (II) No input driver specified, ignoring this device.
[     6.039] (II) This device may have been added with another device file.
[     6.040] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[     6.040] (II) No input driver specified, ignoring this device.
[     6.040] (II) This device may have been added with another device file.
[     6.041] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event12)
[     6.041] (II) No input driver specified, ignoring this device.
[     6.041] (II) This device may have been added with another device file.
[     6.041] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event13)
[     6.042] (II) No input driver specified, ignoring this device.
[     6.042] (II) This device may have been added with another device file.
[     6.042] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event14)
[     6.042] (II) No input driver specified, ignoring this device.
[     6.042] (II) This device may have been added with another device file.
[     6.043] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[     6.043] (II) No input driver specified, ignoring this device.
[     6.043] (II) This device may have been added with another device file.
[     6.044] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[     6.044] (II) No input driver specified, ignoring this device.
[     6.044] (II) This device may have been added with another device file.
[     6.045] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[     6.045] (II) No input driver specified, ignoring this device.
[     6.045] (II) This device may have been added with another device file.
[     6.046] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[     6.046] (II) No input driver specified, ignoring this device.
[     6.046] (II) This device may have been added with another device file.
[     6.047] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event10)
[     6.047] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.047] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[     6.047] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[     6.047] (**) Dell WMI hotkeys: always reports core events
[     6.047] (**) Option "Device" "/dev/input/event10"
[     6.050] (II) event10 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     6.050] (II) event10 - Dell WMI hotkeys: device is a keyboard
[     6.050] (II) event10 - Dell WMI hotkeys: device removed
[     6.100] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10/event10"
[     6.100] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
[     6.100] (**) Option "xkb_model" "pc104"
[     6.100] (**) Option "xkb_layout" "us"
[     6.100] (**) Option "xkb_options" "caps:ctrl_modifier"
[     6.102] (II) event10 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     6.103] (II) event10 - Dell WMI hotkeys: device is a keyboard
[     6.104] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[     6.104] (II) No input driver specified, ignoring this device.
[     6.104] (II) This device may have been added with another device file.
[     7.370] (II) intel(0): EDID vendor "DEL", prod id 16615
[     7.370] (II) intel(0): Using EDID range info for horizontal sync
[     7.370] (II) intel(0): Using EDID range info for vertical refresh
[     7.370] (II) intel(0): Printing DDC gathered Modelines:
[     7.370] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[     7.370] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1082 1087 1125 +hsync +vsync (67.5 kHz e)
[     7.370] (II) intel(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[     7.370] (II) intel(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     7.370] (II) intel(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     7.370] (II) intel(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[     7.370] (II) intel(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[     7.370] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     7.370] (II) intel(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[     7.370] (II) intel(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[     7.370] (II) intel(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[     7.370] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[     7.370] (II) intel(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[     7.370] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     7.370] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     7.370] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     7.370] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     7.370] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     7.370] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     7.370] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     7.370] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     7.370] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     7.370] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    66.639] (II) intel(0): resizing framebuffer to 3000x1920
[    66.685] (II) intel(0): switch to mode 1920x1080@60.0 on DP1 using pipe 0, position (0, 611), rotation normal, reflection none
[    66.805] (II) intel(0): switch to mode 1920x1080@50.0 on HDMI2 using pipe 1, position (1920, 0), rotation right, reflection none

Last edited by Toad39 (2024-09-26 03:55:19)

Offline

#5 2024-09-26 14:26:56

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,805

Re: No signal when trying to wake from sleep

I use caffeine to prevent it from going to sleep with audio

I'm not sure what that's supposed to mean.
Do you try to prevent the monitor from shutting off or the screensaver turning on or do you try to prevent the system from entering suspend-to-ram (ie. the power goes off, fans shut down and there's maybe a flashing LED to indicate the state)

1.

[     5.357] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[     5.357] (EE) AIGLX error: unable to load driver i965
[     5.389] (II) IGLX: Loaded and initialized swrast
[     5.389] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     5.389] (II) Initializing extension XFree86-VidModeExtension

remove xf86-video-intel and every configuration referencing the driver

grep -ri intel /{etc,usr/share}/X11/xorg.conf*

2.

I cannot ping or ssh into the computer when this happens.

Can you usually?

cat /sys/power/mem_sleep

Assuming this is about S3/s2idle rather than DPMS and ceterum censeo: is there a parallel windows installation?

---
PEG* doesn't seem to reference the PEG (pcie for graphcis), sorry - my bad.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB