You are not logged in.

Pages: 1

#1 2024-08-08 11:43:38

agilityenjoyer22
Member
Registered: 2024-08-08
Posts: 2

Wallpaper images are offset after every boot on KDE

This has been happening for a while but I've never been bothered to fix it because I've never seen anyone with a similar issue (so troubleshooting it blind would be a PITA) and because turning both monitors on and off gets them to the correct position.

So basically, as the title suggest, after almost every reboot my wallpaper images get offset by what I feel is a random amount (sorry I never documented the occurrences).

DesktopSC

My Arch is up to date, and I'm using KDE 6.1.3, X11, with a GTX1050.

lspci -n -n -k | grep -A 2 -e VGA -e 3D` returns
08:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP107 [GeForce GTX 1050] [10de:1c81] (rev a1)
        Subsystem: eVga.com. Corp. Device [3842:6155]
        Kernel driver in use: nvidia

Xorg.0.log has this:

[ 41418.003] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): connected
 512   │ [ 41418.003] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): Internal TMDS
 513   │ [ 41418.003] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): 330.0 MHz maximum pixel clock
 514   │ [ 41418.003] (--) NVIDIA(GPU-0): 
 515   │ [ 41418.089] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): connected
 516   │ [ 41418.089] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): Internal TMDS
 517   │ [ 41418.089] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): 600.0 MHz maximum pixel clock
 518   │ [ 41418.089] (--) NVIDIA(GPU-0): 
 519   │ [ 41418.089] (--) NVIDIA(GPU-0): DFP-2: disconnected
 520   │ [ 41418.089] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
 521   │ [ 41418.089] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
 522   │ [ 41418.089] (--) NVIDIA(GPU-0): 
 523   │ [ 41418.090] (--) NVIDIA(GPU-0): DFP-3: disconnected
 524   │ [ 41418.090] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
 525   │ [ 41418.090] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
 526   │ [ 41418.090] (--) NVIDIA(GPU-0): 
 527   │ [ 41418.147] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1050x1680 +0+0 {ViewPortIn=1050x1680, ViewPortOut=1680x1050+0+0, Rotation=90}, HDMI-0: nvidia-auto-select @1920x1080 +1680+0 {Vie
       │ wPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
 528   │ [ 41418.165] (WW) NVIDIA(0): Failed to request fliplock.
 529   │ [ 41418.200] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1050x1680 +0+0 {ViewPortIn=1050x1680, ViewPortOut=1680x1050+0+0, Rotation=90}, HDMI-0: nvidia-auto-select @1920x1080 +1050+382 {V
       │ iewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
 530   │ [ 41418.265] (WW) NVIDIA(0): Failed to request fliplock.

I don't know what other information might be relevant to troubleshoot this issue, everything needed is here!
If I'm missing something, please let me know!

Last edited by agilityenjoyer22 (2024-08-10 02:02:28)

Offline

#2 2024-08-08 13:36:53

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,828

Re: Wallpaper images are offset after every boot on KDE

Please use [code][/code] tags. Edit your post in this regard.
Then post the entire X11 log and also the output of "xrandr -q"

Likely kscreen is altering the layout during the session start, try to remove its config, https://wiki.archlinux.org/title/KDE#Un … lution_set

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2024-08-09 11:43:17

agilityenjoyer22
Member
Registered: 2024-08-08
Posts: 2

Re: Wallpaper images are offset after every boot on KDE

seth wrote:

Then post the entire X11 log

 [128717.403] (--) Log file renamed from "/var/log/Xorg.pid-131276.log" to "/var/log/Xorg.0.log"
[128717.404] 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[128717.404] Current Operating System: Linux ArchLucas 6.10.3-arch1-2 #1 SMP PREEMPT_DYNAMIC Tue, 06 Aug 2024 07:21:19 +0000 x86_64
[128717.404] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=0ea060e9-a466-49d4-a97f-50c7428f04af rw loglevel=3 quiet
[128717.404]  
[128717.404] Current version of pixman: 0.43.4
[128717.404]    Before reporting problems, check [url]http://wiki.x.org[/url]
        to make sure that you have the latest version.
[128717.404] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[128717.404] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug  9 08:27:03 2024
[128717.405] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[128717.408] (==) No Layout section.  Using the first Screen section.
[128717.408] (==) No screen section available. Using defaults.
[128717.408] (**) |-->Screen "Default Screen Section" (0)
[128717.408] (**) |   |-->Monitor "<default monitor>"
[128717.408] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[128717.408] (**) Allowing byte-swapped clients
[128717.408] (==) Automatically adding devices
[128717.408] (==) Automatically enabling devices
[128717.408] (==) Automatically adding GPU devices
[128717.408] (==) Automatically binding GPU devices
[128717.408] (==) Max clients allowed: 256, resource mask: 0x1fffff
[128717.408] (WW) The directory "/usr/share/fonts/misc" does not exist.
[128717.408]    Entry deleted from font path.
[128717.408] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[128717.408]    Entry deleted from font path.
[128717.408]    (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[128717.408] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[128717.408]    Entry deleted from font path.
[128717.408] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[128717.408]    Entry deleted from font path.
[128717.408] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[128717.408]    Entry deleted from font path.
[128717.408] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[128717.408]    Entry deleted from font path.
[128717.408] (==) FontPath set to:

[128717.408] (==) ModulePath set to "/usr/lib/xorg/modules"
[128717.408] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[128717.408] (II) Module ABI versions:
[128717.408]    X.Org ANSI C Emulation: 0.4
[128717.408]    X.Org Video Driver: 25.2
[128717.408]    X.Org XInput driver : 24.4
[128717.408]    X.Org Server Extension : 10.0
[128717.408] (++) using VT number 1

[128717.408] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[128717.409] (II) xfree86: Adding drm device (/dev/dri/card1)
[128717.409] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:08:00.0/drm/card1
[128717.409] (II) xfree86: Adding drm device (/dev/dri/card0)
[128717.409] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:08:00.0/simple-framebuffer.0/drm/card0
[128717.416] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[128717.418] (--) PCI:*(8@0:0:0) 10de:1c81:3842:6155 rev 161, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[128717.418] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[128717.418] (II) LoadModule: "glx"
[128717.419] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[128717.422] (II) Module glx: vendor="X.Org Foundation"
[128717.422]    compiled for 1.21.1.13, module version = 1.0.0
[128717.422]    ABI class: X.Org Server Extension, version 10.0
[128717.422] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[128717.422]    loading driver: nvidia
[128717.422] (==) Matched nouveau as autoconfigured driver 0
[128717.422] (==) Matched nv as autoconfigured driver 1
[128717.422] (==) Matched nvidia as autoconfigured driver 2
[128717.422] (==) Matched modesetting as autoconfigured driver 3
[128717.422] (==) Matched fbdev as autoconfigured driver 4
[128717.422] (==) Matched vesa as autoconfigured driver 5
[128717.422] (==) Assigned the driver to the xf86ConfigLayout
[128717.422] (II) LoadModule: "nouveau"
[128717.422] (WW) Warning, couldn't open module nouveau
[128717.422] (EE) Failed to load module "nouveau" (module does not exist, 0)
[128717.422] (II) LoadModule: "nv"
[128717.422] (WW) Warning, couldn't open module nv
[128717.422] (EE) Failed to load module "nv" (module does not exist, 0)
[128717.422] (II) LoadModule: "nvidia"
[128717.422] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[128717.425] (II) Module nvidia: vendor="NVIDIA Corporation"
[128717.425]    compiled for 1.6.99.901, module version = 1.0.0
[128717.425]    Module class: X.Org Video Driver
[128717.425] (II) LoadModule: "modesetting"
[128717.425] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[128717.427] (II) Module modesetting: vendor="X.Org Foundation"
[128717.427]    compiled for 1.21.1.13, module version = 1.21.1
[128717.427]    Module class: X.Org Video Driver
[128717.427]    ABI class: X.Org Video Driver, version 25.2
[128717.427] (II) LoadModule: "fbdev"
[128717.427] (WW) Warning, couldn't open module fbdev
[128717.427] (EE) Failed to load module "fbdev" (module does not exist, 0)
[128717.427] (II) LoadModule: "vesa"
[128717.427] (WW) Warning, couldn't open module vesa
[128717.427] (EE) Failed to load module "vesa" (module does not exist, 0)
[128717.427] (II) NVIDIA dlloader X Driver  555.58.02  Tue Jun 25 01:14:56 UTC 2024
[128717.427] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[128717.428] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[128717.438] (II) Loading sub module "fb"
[128717.438] (II) LoadModule: "fb"
[128717.438] (II) Module "fb" already built-in
[128717.438] (II) Loading sub module "wfb"
[128717.438] (II) LoadModule: "wfb"
[128717.438] (II) Loading /usr/lib/xorg/modules/libwfb.so
[128717.440] (II) Module wfb: vendor="X.Org Foundation"
[128717.440]    compiled for 1.21.1.13, module version = 1.0.0
[128717.440]    ABI class: X.Org ANSI C Emulation, version 0.4
[128717.440] (WW) Falling back to old probe method for modesetting
[128717.445] (II) NVIDIA(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[128717.445] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[128717.445] (==) NVIDIA(0): RGB weight 888
[128717.445] (==) NVIDIA(0): Default visual is TrueColor
[128717.445] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[128717.445] (**) NVIDIA(0): Enabling 2D acceleration
[128717.445] (II) Loading sub module "glxserver_nvidia"
[128717.445] (II) LoadModule: "glxserver_nvidia"
[128717.445] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[128717.472] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[128717.472]    compiled for 1.6.99.901, module version = 1.0.0
[128717.472]    Module class: X.Org Server Extension
[128717.472] (II) NVIDIA GLX Module  555.58.02  Tue Jun 25 01:12:27 UTC 2024
[128717.472] (II) NVIDIA: The X server supports PRIME Render Offload.
[128717.882] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:8:0:0
[128717.882] (--) NVIDIA(0):     DFP-0 (boot)
[128717.882] (--) NVIDIA(0):     DFP-1
[128717.882] (--) NVIDIA(0):     DFP-2
[128717.882] (--) NVIDIA(0):     DFP-3
[128717.883] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GTX 1050 (GP107-A) at PCI:8:0:0
[128717.883] (II) NVIDIA(0):     (GPU-0)
[128717.883] (--) NVIDIA(0): Memory: 2097152 kBytes
[128717.883] (--) NVIDIA(0): VideoBIOS: 86.07.25.00.50
[128717.883] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[128717.898] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): connected
[128717.898] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): Internal TMDS
[128717.898] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): 330.0 MHz maximum pixel clock
[128717.898] (--) NVIDIA(GPU-0): 
[128717.942] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): connected
[128717.942] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): Internal TMDS
[128717.942] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): 600.0 MHz maximum pixel clock
[128717.942] (--) NVIDIA(GPU-0): 
[128717.942] (--) NVIDIA(GPU-0): DFP-2: disconnected
[128717.942] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[128717.942] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[128717.942] (--) NVIDIA(GPU-0): 
[128717.942] (--) NVIDIA(GPU-0): DFP-3: disconnected
[128717.942] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[128717.942] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[128717.942] (--) NVIDIA(GPU-0): 
[128717.948] (==) NVIDIA(0): 
[128717.948] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[128717.948] (==) NVIDIA(0):     will be used as the requested mode.
[128717.948] (==) NVIDIA(0): 
[128717.948] (II) NVIDIA(0): Validated MetaModes:
[128717.948] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[128717.948] (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
[128717.951] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[128717.952] (--) NVIDIA(0):     option
[128717.952] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[128717.952] (==) NVIDIA(G0): RGB weight 888
[128717.952] (==) NVIDIA(G0): Default visual is TrueColor
[128717.952] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[128717.952] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[128717.952] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[128717.952] (**) NVIDIA(G0): Enabling 2D acceleration
[128717.952] (II) NVIDIA: The X server supports PRIME Render Offload.
[128717.952] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[128717.952] (EE) NVIDIA(G0): Failing initialization of X screen
[128717.952] (II) UnloadModule: "nvidia"
[128717.952] (II) UnloadSubModule: "wfb"
[128717.952] (II) UnloadModule: "modesetting"
[128717.952] (II) Unloading modesetting
[128717.952] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[128717.952] (II) NVIDIA(GPU-1): Deleting GPU-1
[128717.955] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[128717.955] (II) NVIDIA:     access.
[128717.956] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[128717.956] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[128717.956] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[128717.956] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[128717.956] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[128717.956] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[128717.956] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[128717.956] (II) NVIDIA(0):     Config Options in the README.
[128717.971] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[128718.033] (==) NVIDIA(0): Disabling shared memory pixmaps
[128718.033] (==) NVIDIA(0): Backing store enabled
[128718.033] (==) NVIDIA(0): Silken mouse enabled
[128718.033] (==) NVIDIA(0): DPMS enabled
[128718.033] (II) Loading sub module "dri2"
[128718.033] (II) LoadModule: "dri2"
[128718.033] (II) Module "dri2" already built-in
[128718.033] (II) NVIDIA(0): [DRI2] Setup complete
[128718.033] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[128718.033] (II) Initializing extension Generic Event Extension
[128718.033] (II) Initializing extension SHAPE
[128718.033] (II) Initializing extension MIT-SHM
[128718.033] (II) Initializing extension XInputExtension
[128718.033] (II) Initializing extension XTEST
[128718.033] (II) Initializing extension BIG-REQUESTS
[128718.033] (II) Initializing extension SYNC
[128718.033] (II) Initializing extension XKEYBOARD
[128718.034] (II) Initializing extension XC-MISC
[128718.034] (II) Initializing extension SECURITY
[128718.034] (II) Initializing extension XFIXES
[128718.034] (II) Initializing extension RENDER
[128718.034] (II) Initializing extension RANDR
[128718.034] (II) Initializing extension COMPOSITE
[128718.034] (II) Initializing extension DAMAGE
[128718.034] (II) Initializing extension MIT-SCREEN-SAVER
[128718.034] (II) Initializing extension DOUBLE-BUFFER
[128718.034] (II) Initializing extension RECORD
[128718.034] (II) Initializing extension DPMS
[128718.034] (II) Initializing extension Present
[128718.034] (II) Initializing extension DRI3
[128718.034] (II) Initializing extension X-Resource
[128718.034] (II) Initializing extension XVideo
[128718.034] (II) Initializing extension XVideo-MotionCompensation
[128718.034] (II) Initializing extension GLX
[128718.035] (II) Initializing extension GLX
[128718.035] (II) Indirect GLX disabled.
[128718.035] (II) GLX: Another vendor is already registered for screen 0
[128718.035] (II) Initializing extension XFree86-VidModeExtension
[128718.035] (II) Initializing extension XFree86-DGA
[128718.035] (II) Initializing extension XFree86-DRI
[128718.035] (II) Initializing extension DRI2
[128718.035] (II) Initializing extension NV-GLX
[128718.035] (II) Initializing extension NV-CONTROL
[128718.035] (II) Initializing extension XINERAMA
[128718.092] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[128718.092] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[128718.092] (II) LoadModule: "libinput"
[128718.092] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[128718.094] (II) Module libinput: vendor="X.Org Foundation"
[128718.094]    compiled for 1.21.1.13, module version = 1.4.0
[128718.095]    Module class: X.Org XInput Driver
[128718.095]    ABI class: X.Org XInput driver, version 24.4
[128718.095] (II) Using input driver 'libinput' for 'Power Button'
[128718.095] (**) Power Button: always reports core events
[128718.095] (**) Option "Device" "/dev/input/event1"
[128718.102] (II) event1  - Power Button: is tagged by udev as: Keyboard
[128718.102] (II) event1  - Power Button: device is a keyboard
[128718.102] (II) event1  - Power Button: device removed
[128718.130] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[128718.130] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[128718.131] (II) event1  - Power Button: is tagged by udev as: Keyboard
[128718.131] (II) event1  - Power Button: device is a keyboard
[128718.131] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[128718.131] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[128718.131] (II) Using input driver 'libinput' for 'Power Button'
[128718.131] (**) Power Button: always reports core events
[128718.131] (**) Option "Device" "/dev/input/event0"
[128718.132] (II) event0  - Power Button: is tagged by udev as: Keyboard
[128718.132] (II) event0  - Power Button: device is a keyboard
[128718.132] (II) event0  - Power Button: device removed
[128718.150] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[128718.150] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[128718.151] (II) event0  - Power Button: is tagged by udev as: Keyboard
[128718.151] (II) event0  - Power Button: device is a keyboard
[128718.151] (II) config/udev: Adding input device Logitech G403 HERO Gaming Mouse (/dev/input/event4)
[128718.151] (**) Logitech G403 HERO Gaming Mouse: Applying InputClass "libinput pointer catchall"
[128718.151] (II) Using input driver 'libinput' for 'Logitech G403 HERO Gaming Mouse'
[128718.151] (**) Logitech G403 HERO Gaming Mouse: always reports core events
[128718.151] (**) Option "Device" "/dev/input/event4"
[128718.208] (II) event4  - Logitech G403 HERO Gaming Mouse: is tagged by udev as: Mouse
[128718.208] (II) event4  - Logitech G403 HERO Gaming Mouse: device set to 800 DPI
[128718.208] (II) event4  - Logitech G403 HERO Gaming Mouse: device is a pointer
[128718.208] (II) event4  - Logitech G403 HERO Gaming Mouse: device removed
[128718.240] (II) libinput: Logitech G403 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[128718.240] (II) libinput: Logitech G403 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[128718.240] (II) libinput: Logitech G403 HERO Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[128718.240] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-1/1-1:1.0/0003:046D:C08F.0003/input/input6/event4"
[128718.240] (II) XINPUT: Adding extended input device "Logitech G403 HERO Gaming Mouse" (type: MOUSE, id 8)
[128718.240] (**) Option "AccelerationScheme" "none"
[128718.240] (**) Logitech G403 HERO Gaming Mouse: (accel) selected scheme none/0
[128718.240] (**) Logitech G403 HERO Gaming Mouse: (accel) acceleration factor: 2.000
[128718.240] (**) Logitech G403 HERO Gaming Mouse: (accel) acceleration threshold: 4
[128718.298] (II) event4  - Logitech G403 HERO Gaming Mouse: is tagged by udev as: Mouse
[128718.298] (II) event4  - Logitech G403 HERO Gaming Mouse: device set to 800 DPI
[128718.298] (II) event4  - Logitech G403 HERO Gaming Mouse: device is a pointer
[128718.300] (II) config/udev: Adding input device Logitech G403 HERO Gaming Mouse (/dev/input/mouse0)
[128718.300] (II) No input driver specified, ignoring this device.
[128718.300] (II) This device may have been added with another device file.
[128718.301] (II) config/udev: Adding input device Logitech G403 HERO Gaming Mouse Keyboard (/dev/input/event5)
[128718.301] (**) Logitech G403 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[128718.301] (II) Using input driver 'libinput' for 'Logitech G403 HERO Gaming Mouse Keyboard'
[128718.301] (**) Logitech G403 HERO Gaming Mouse Keyboard: always reports core events
[128718.301] (**) Option "Device" "/dev/input/event5"
[128718.303] (II) event5  - Logitech G403 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[128718.303] (II) event5  - Logitech G403 HERO Gaming Mouse Keyboard: device is a keyboard
[128718.303] (II) event5  - Logitech G403 HERO Gaming Mouse Keyboard: device removed
[128718.333] (II) libinput: Logitech G403 HERO Gaming Mouse Keyboard: needs a virtual subdevice
[128718.333] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-1/1-1:1.1/0003:046D:C08F.0004/input/input7/event5"
[128718.333] (II) XINPUT: Adding extended input device "Logitech G403 HERO Gaming Mouse Keyboard" (type: MOUSE, id 9)
[128718.333] (**) Option "AccelerationScheme" "none"
[128718.333] (**) Logitech G403 HERO Gaming Mouse Keyboard: (accel) selected scheme none/0
[128718.333] (**) Logitech G403 HERO Gaming Mouse Keyboard: (accel) acceleration factor: 2.000
[128718.333] (**) Logitech G403 HERO Gaming Mouse Keyboard: (accel) acceleration threshold: 4
[128718.335] (II) event5  - Logitech G403 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[128718.335] (II) event5  - Logitech G403 HERO Gaming Mouse Keyboard: device is a keyboard
[128718.337] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[128718.337] (II) No input driver specified, ignoring this device.
[128718.337] (II) This device may have been added with another device file.
[128718.337] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[128718.337] (II) No input driver specified, ignoring this device.
[128718.337] (II) This device may have been added with another device file.
[128718.338] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[128718.338] (II) No input driver specified, ignoring this device.
[128718.338] (II) This device may have been added with another device file.
[128718.338] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[128718.338] (II) No input driver specified, ignoring this device.
[128718.338] (II) This device may have been added with another device file.
[128718.340] (II) config/udev: Adding input device Logitech G413 Carbon Mechanical Gaming Keyboard (/dev/input/event2)
[128718.340] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[128718.340] (II) Using input driver 'libinput' for 'Logitech G413 Carbon Mechanical Gaming Keyboard'
[128718.340] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: always reports core events
[128718.340] (**) Option "Device" "/dev/input/event2"
[128718.342] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[128718.342] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[128718.342] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: device removed
[128718.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-1/3-1:1.0/0003:046D:C33A.0001/input/input2/event2"
[128718.360] (II) XINPUT: Adding extended input device "Logitech G413 Carbon Mechanical Gaming Keyboard" (type: KEYBOARD, id 10)
[128718.362] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[128718.362] (II) event2  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[128718.364] (II) config/udev: Adding input device Logitech G413 Carbon Mechanical Gaming Keyboard (/dev/input/event3)
[128718.364] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[128718.364] (II) Using input driver 'libinput' for 'Logitech G413 Carbon Mechanical Gaming Keyboard'
[128718.364] (**) Logitech G413 Carbon Mechanical Gaming Keyboard: always reports core events
[128718.364] (**) Option "Device" "/dev/input/event3"
[128718.366] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[128718.366] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[128718.366] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: device removed
[128718.393] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb3/3-1/3-1:1.1/0003:046D:C33A.0002/input/input3/event3"
[128718.393] (II) XINPUT: Adding extended input device "Logitech G413 Carbon Mechanical Gaming Keyboard" (type: KEYBOARD, id 11)
[128718.395] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[128718.396] (II) event3  - Logitech G413 Carbon Mechanical Gaming Keyboard: device is a keyboard
[128718.396] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event12)
[128718.396] (II) No input driver specified, ignoring this device.
[128718.396] (II) This device may have been added with another device file.
[128718.397] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event13)
[128718.397] (II) No input driver specified, ignoring this device.
[128718.397] (II) This device may have been added with another device file.
[128718.397] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event14)
[128718.397] (II) No input driver specified, ignoring this device.
[128718.397] (II) This device may have been added with another device file.
[128718.398] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event15)
[128718.398] (II) No input driver specified, ignoring this device.
[128718.398] (II) This device may have been added with another device file.
[128718.399] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event16)
[128718.399] (II) No input driver specified, ignoring this device.
[128718.399] (II) This device may have been added with another device file.
[128718.399] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[128718.399] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[128718.399] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[128718.399] (**) Eee PC WMI hotkeys: always reports core events
[128718.399] (**) Option "Device" "/dev/input/event7"
[128718.400] (II) event7  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[128718.400] (II) event7  - Eee PC WMI hotkeys: device is a keyboard
[128718.400] (II) event7  - Eee PC WMI hotkeys: device removed
[128718.443] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input11/event7"
[128718.443] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[128718.444] (II) event7  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[128718.445] (II) event7  - Eee PC WMI hotkeys: device is a keyboard
[128718.445] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[128718.445] (II) No input driver specified, ignoring this device.
[128718.445] (II) This device may have been added with another device file.
[128718.455] (**) Logitech G403 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[128718.455] (II) Using input driver 'libinput' for 'Logitech G403 HERO Gaming Mouse Keyboard'
[128718.455] (**) Logitech G403 HERO Gaming Mouse Keyboard: always reports core events
[128718.455] (**) Option "Device" "/dev/input/event5"
[128718.455] (II) libinput: Logitech G403 HERO Gaming Mouse Keyboard: is a virtual subdevice
[128718.455] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-1/1-1:1.1/0003:046D:C08F.0004/input/input7/event5"
[128718.455] (II) XINPUT: Adding extended input device "Logitech G403 HERO Gaming Mouse Keyboard" (type: KEYBOARD, id 13)
[128718.518] (--) NVIDIA(GPU-0): DFP-1: disconnected
[128718.518] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[128718.518] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[128718.518] (--) NVIDIA(GPU-0): 
[128719.884] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): connected
[128719.884] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): Internal TMDS
[128719.884] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): 600.0 MHz maximum pixel clock
[128719.884] (--) NVIDIA(GPU-0): 
[128728.710] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): connected
[128728.710] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): Internal TMDS
[128728.710] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): 330.0 MHz maximum pixel clock
[128728.710] (--) NVIDIA(GPU-0): 
[128728.754] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): connected
[128728.754] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): Internal TMDS
[128728.754] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): 600.0 MHz maximum pixel clock
[128728.754] (--) NVIDIA(GPU-0): 
[128728.754] (--) NVIDIA(GPU-0): DFP-2: disconnected
[128728.754] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[128728.754] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[128728.754] (--) NVIDIA(GPU-0): 
[128728.754] (--) NVIDIA(GPU-0): DFP-3: disconnected
[128728.754] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[128728.754] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[128728.754] (--) NVIDIA(GPU-0): 
[128729.339] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): connected
[128729.339] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): Internal TMDS
[128729.339] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): 330.0 MHz maximum pixel clock
[128729.339] (--) NVIDIA(GPU-0): 
[128729.404] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): connected
[128729.404] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): Internal TMDS
[128729.404] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): 600.0 MHz maximum pixel clock
[128729.404] (--) NVIDIA(GPU-0): 
[128729.404] (--) NVIDIA(GPU-0): DFP-2: disconnected
[128729.404] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[128729.404] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[128729.404] (--) NVIDIA(GPU-0): 
[128729.406] (--) NVIDIA(GPU-0): DFP-3: disconnected
[128729.406] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[128729.406] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[128729.406] (--) NVIDIA(GPU-0): 
[128729.453] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1050x1680 +0+0 {ViewPortIn=1050x1680, ViewPortOut=1680x1050+0+0, Rotation=90}, HDMI-0: nvidia-auto-select @1920x1080 +1680+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[128729.480] (WW) NVIDIA(0): Failed to request fliplock.
[128729.514] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1050x1680 +0+0 {ViewPortIn=1050x1680, ViewPortOut=1680x1050+0+0, Rotation=90}, HDMI-0: nvidia-auto-select @1920x1080 +1050+382 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[128729.580] (WW) NVIDIA(0): Failed to request fliplock.
[128907.346] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): connected
[128907.346] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): Internal TMDS
[128907.346] (--) NVIDIA(GPU-0): DELL P2210 (DFP-0): 330.0 MHz maximum pixel clock
[128907.346] (--) NVIDIA(GPU-0): 
[128907.390] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): connected
[128907.390] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): Internal TMDS
[128907.390] (--) NVIDIA(GPU-0): LG Electronics LG ULTRAGEAR (DFP-1): 600.0 MHz maximum pixel clock
[128907.390] (--) NVIDIA(GPU-0): 
[128907.390] (--) NVIDIA(GPU-0): DFP-2: disconnected
[128907.390] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[128907.390] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[128907.390] (--) NVIDIA(GPU-0): 
[128907.390] (--) NVIDIA(GPU-0): DFP-3: disconnected
[128907.390] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[128907.390] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[128907.390] (--) NVIDIA(GPU-0):
seth wrote:

and also the output of "xrandr -q"

xrandr -q
/Screen 0: minimum 8 x 8, current 2970 x 1680, maximum 32767 x 32767
DVI-D-0 connected 1050x1680+0+0 left (normal left inverted right x axis y axis) 474mm x 296mm
   1680x1050     59.88*+  59.95  
   1280x1024     75.02    60.02  
   1152x864      75.00  
   1024x768      75.03    60.00  
   800x600       75.00    60.32  
   640x480       75.00    59.94 
HDMI-0 connected primary 1920x1080+1050+382 (normal left inverted right x axis y axis) 527mm x 296mm
   1920x1080    143.98*+ 119.98   119.88   100.00    60.00    59.94    50.00  
   2560x1440     74.97  
   1280x1024     75.02  
   1280x720      59.94    50.00  
   1024x768     119.99    75.03    60.00  
   800x600      119.97    75.00    60.32  
   720x576       50.00  
   720x480       59.94  
   640x480      120.01    75.00    59.94    59.93  
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
seth wrote:

Likely kscreen is altering the layout during the session start, try to remove its config

there's no xorg.conf there

ls -as
l│ 0 │ outputs                          │ dir  │ 4.0 KiB │ a month ago   │
│ 1 │ 8f4613e4287171bd1c50203ac3efd287 │ file │ 1.6 KiB │ 3 months ago  │
│ 2 │ 7ae8f48e5ed87c7e27ef5f813706ee70 │ file │   596 B │ 3 weeks ago   │
│ 3 │ 167a28141896242e31d3476c047dae44 │ file │ 1.2 KiB │ 6 minutes ago │
│ 4 │ 1eefc20952a3ce24fe1e68754fc324c1 │ file │ 1.1 KiB │ 3 months ago  │
│ 5 │ 8d29225343cad8967534fe51fcdf1ece │ file │   593 B │ a day ago     │
│ 6 │ ff6e29a294593fb1c26667e4aed37a5a │ file │   483 B │ a month ago   │
│ 7 │ 48d70391e3396c664cce7786dbc6867f │ file │ 1.1 KiB │ 4 months ago  │

Last edited by agilityenjoyer22 (2024-08-10 02:01:04)

Offline

#4 2024-08-09 11:46:17

Nikolai5
Member
From: North West, England, UK
Registered: 2024-01-27
Posts: 274

Re: Wallpaper images are offset after every boot on KDE

Edit your above post and wrap all that in code tags please.

Last edited by Nikolai5 (2024-08-09 11:46:35)

Ryzen 7 9850X3D | AMD 7800XT | KDE Plasma

Offline

#5 2024-08-09 13:39:43

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,828

Re: Wallpaper images are offset after every boot on KDE

You're not lookign for any xorg.conf's in the kscreen path but kscreen configs and the idea is to remove those.
It probably stumbles over +382  - if deleting the kscreen files doesn't fix it, try to configure the position via xorg, https://wiki.archlinux.org/title/Multih … _xorg.conf

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB