You are not logged in.
My Thinkpad model is L470,it has Intel CPU with Intel HD Graphics 620,and it also has another graphics card,that's Radeon M330.The question is I couldn't check if my Radeon M330 is working,what can I do if it's not working?
Offline
Details about your system are needed.
Please post the full output of lscpi -knn using code tags, see https://bbs.archlinux.org/help.php#bbcode .
Also as root run journalctl -b | curl -F 'file=@-' 0x0.st .
That command will upload your journal to a public hosting site and output a link when it has finished.
Post that link.
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
That's a hybrid/PRIME setup, which is documented in https://wiki.archlinux.org/title/PRIME# … rs_-_PRIME
Basically check and compare e.g. the output of
DRI_PRIME=1 glxinfo -B
glxinfo -B
the first should show the radeon card getting used as the renderer, the second the intel card.
Offline
Details about your system are needed.
Please post the full output of lscpi -knn using code tags, see https://bbs.archlinux.org/help.php#bbcode .
Also as root run journalctl -b | curl -F 'file=@-' 0x0.st .
That command will upload your journal to a public hosting site and output a link when it has finished.
Post that link.
Do you mean lspci -knn?I tried to run this,and I got a string of result,should I paste them back?
For journalctl -b | curl -F 'file=@-' 0x0.st,it's returned a concerning result,it says Network 124.90.0.0/15 (CNC Group CHINA169 Zhejiang Province Network) is blocked from uploading files due to frequent abuse. I think it is not a expected condition.
Offline
That's a hybrid/PRIME setup, which is documented in https://wiki.archlinux.org/title/PRIME# … rs_-_PRIME
Basically check and compare e.g. the output of
DRI_PRIME=1 glxinfo -B glxinfo -B
the first should show the radeon card getting used as the renderer, the second the intel card.
Could you tell me the detail?I have read this article,but I still couldn't handle the problem myself.thanks.
Offline
Details about your system are needed.
Please post the full output of lscpi -knn using code tags, see https://bbs.archlinux.org/help.php#bbcode .
Also as root run journalctl -b | curl -F 'file=@-' 0x0.st .
That command will upload your journal to a public hosting site and output a link when it has finished.
Post that link.
here is the lspci -knn result
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 620 [8086:5916] (rev 02)
Subsystem: Lenovo Device [17aa:5060]
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 [8086:9d10] (rev f1)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #7 [8086:9d16] (rev f1)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: pcieport
00:1d.3 PCI bridge [0604]: Intel Corporation Device [8086:9d1b] (rev f1)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point LPC/eSPI Controller [8086:9d4e] (rev 21)
Subsystem: Lenovo Device [17aa:505f]
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
Subsystem: Lenovo Device [17aa:505f]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d71] (rev 21)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl, snd_soc_avs
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (4) I219-V [8086:15d8] (rev 21)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: e1000e
Kernel modules: e1000e
02:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / Radeon 520 Mobile] [1002:6660] (rev 83)
Subsystem: Lenovo Device [17aa:5060]
Kernel driver in use: radeon
Kernel modules: radeon, amdgpu
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader [10ec:522a] (rev 01)
Subsystem: Lenovo Device [17aa:505f]
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
05:00.0 Network controller [0280]: Intel Corporation Wireless 8265 / 8275 [8086:24fd] (rev 78)
Subsystem: Intel Corporation Dual Band Wireless-AC 8265 [8086:1010]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
Offline
Generally if you're unable to interpret the outputs commands give you, you should post them back so people can comment on their conditions. Assuming your journalctl -b is not egregriously huge you can also paste it here in code blocks, if you're getting blocked from 0x0.st
One thing we can surmise from the lspci output that you might want to switch the graphics card over to the amdgpu module, in order to be able to use vulkan for example, which you'd do as described in: https://wiki.archlinux.org/title/AMDGPU … K)_support
Offline
Could you tell me the detail?
Start w/ the commands V1del suggested.
I think it is not a expected condition.
Your WAN segment gets filtered by 0x0.st because of eitherfrequent network attacks or illegal uploads from that WAN segment.
Please avoid fully quoting posts, you're only bloating the thread.
Isolate what you directly want to respond to and otherwise just post your questions/answers.
Offline