mouse touchpad and wifi connection via USB device failed after last up

daidahan · 2024-08-15 10:53:42

My mouse, touchpad and wifi connection via USB device failed after last update from Linux 6.10.3.arch1-2 to Linux 6.10.4.arch2-1.

I have checked journalctl and found some lines that say USB not compatible. It appears when I connect the mouse and also with the wireless USB adapter. Now how do I fix it?

gromit · 2024-08-15 11:13:50

Did you reboot your machine in the meantime?

if that did not solve the issue, did you confirm that downgrading the linux package makes the problem go away?

daidahan · 2024-08-15 11:41:55

Yes, I rebooted. I try all the simple. But I don't know how downgrade the Linux package. I asked chatgpt and the solution they offer me, far from being simple, comes with a warning that it is not recommended. Such an answer is unreliable.

gromit · 2024-08-15 11:54:34

Whatever ChatGPT suggested, this is how you do it:

sudo pacman -U https://archive.archlinux.org/packages/l/linux/linux-6.10.3.arch1-2-x86_64.pkg.tar.zst

Then just reboot and see if things work out, if they do upgrade again with pacman -Syu and then reboot again and see if it breaks

daidahan · 2024-08-15 13:32:51

Done. I downgraded. Rebooted and the mouse worked. I ran sudo Pacman -Syu. I rebooted. The mouse stopped working again.

gromit · 2024-08-15 13:38:05

Does the mouse work with the latest mainline kernel?

sudo pacman -U https://pkgbuild.com/\~gromit/linux-bisection-kernels/linux-mainline-6.11rc3-1-x86_64.pkg.tar.zst

Note that you'll need to teach your bootloader how to boot that (i.e. by running "grub-mkconfig .." or writing the systemd-boot loader entry).

daidahan · 2024-08-15 13:56:44

Returned error 404

daidahan · 2024-08-15 14:07:01

Ahhh I find my error. In the URL. Wait for moment please

daidahan · 2024-08-15 14:30:44

Yes. work with the latest mainline kernel. Thanks for your time. How close this post?

gromit · 2024-08-15 15:53:07

Could you post the output of dmesg from a boot where the USB does not work?

daidahan · 2024-08-16 21:33:35

ok, i will try. but , i need few time. in this moment i can`t. i need 72 hours.

daidahan · 2024-08-17 18:17:08

hi, master. here give you the log. this not work.
I downgraded. then reboot. then run pacman -Syu. reboot again. It stopped working and I ran dmesg >> dmsg.txt
This is the exit.

P.S. I tried to update later from https://pkgbuild/~gromit.... but it didn't work... did you make any changes or did I change the execution order?

thanks for all

[    0.000000] Linux version 6.10.3-arch1-2 (linux@archlinux) (gcc (GCC) 14.2.1 20240805, GNU ld (GNU Binutils) 2.43.0) #1 SMP PREEMPT_DYNAMIC Tue, 06 Aug 2024 07:21:19 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b27d818a-8bf0-4e8f-8389-b683a66eab5a rw loglevel=3 quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf66d7ff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf66d800-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Dell Inc. XPS M1330                       /0N6705, BIOS A11 06/19/2008
[    0.000000] DMI: Memory slots populated: 2/2
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1496.173 MHz processor
[    0.002379] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002387] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002400] last_pfn = 0xbf66d max_arch_pfn = 0x400000000
[    0.002422] total RAM covered: 3063M
[    0.002813] Found optimal setting for mtrr clean up
[    0.002815]  gran_size: 64K 	chunk_size: 16M 	num_reg: 4  	lose cover RAM: 0G
[    0.002825] MTRR map: 7 entries (5 fixed + 2 variable; max 21), built from 8 variable MTRRs
[    0.002831] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.025281] RAMDISK: [mem 0x362ad000-0x3714dfff]
[    0.025384] ACPI: Early table checksum verification disabled
[    0.025392] ACPI: RSDP 0x00000000000FBBF0 000024 (v02 DELL  )
[    0.025401] ACPI: XSDT 0x00000000BF66F200 00005C (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025414] ACPI: FACP 0x00000000BF66F09C 0000F4 (v04 DELL   M08      27D80613 ASL  00000061)
[    0.025427] ACPI: DSDT 0x00000000BF66F800 005733 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.025436] ACPI: FACS 0x00000000BF67E000 000040
[    0.025443] ACPI: FACS 0x00000000BF67E000 000040
[    0.025450] ACPI: HPET 0x00000000BF66F300 000038 (v01 DELL   M08      00000001 ASL  00000061)
[    0.025459] ACPI: APIC 0x00000000BF66F400 000068 (v01 DELL   M08      27D80613 ASL  00000047)
[    0.025467] ACPI: MCFG 0x00000000BF66F3C0 00003E (v16 DELL   M08      27D80613 ASL  00000061)
[    0.025476] ACPI: SLIC 0x00000000BF66F49C 000176 (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025484] ACPI: BOOT 0x00000000BF66EFC0 000028 (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025492] ACPI: SSDT 0x00000000BF66DA82 0004CC (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.025499] ACPI: Reserving FACP table memory at [mem 0xbf66f09c-0xbf66f18f]
[    0.025502] ACPI: Reserving DSDT table memory at [mem 0xbf66f800-0xbf674f32]
[    0.025505] ACPI: Reserving FACS table memory at [mem 0xbf67e000-0xbf67e03f]
[    0.025507] ACPI: Reserving FACS table memory at [mem 0xbf67e000-0xbf67e03f]
[    0.025510] ACPI: Reserving HPET table memory at [mem 0xbf66f300-0xbf66f337]
[    0.025512] ACPI: Reserving APIC table memory at [mem 0xbf66f400-0xbf66f467]
[    0.025515] ACPI: Reserving MCFG table memory at [mem 0xbf66f3c0-0xbf66f3fd]
[    0.025517] ACPI: Reserving SLIC table memory at [mem 0xbf66f49c-0xbf66f611]
[    0.025519] ACPI: Reserving BOOT table memory at [mem 0xbf66efc0-0xbf66efe7]
[    0.025522] ACPI: Reserving SSDT table memory at [mem 0xbf66da82-0xbf66df4d]
[    0.025641] No NUMA configuration found
[    0.025643] Faking a node at [mem 0x0000000000000000-0x00000000bf66cfff]
[    0.025649] NODE_DATA(0) allocated [mem 0xbf668000-0xbf66cfff]
[    0.025706] Zone ranges:
[    0.025708]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.025712]   DMA32    [mem 0x0000000001000000-0x00000000bf66cfff]
[    0.025716]   Normal   empty
[    0.025719]   Device   empty
[    0.025722] Movable zone start for each node
[    0.025723] Early memory node ranges
[    0.025725]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.025728]   node   0: [mem 0x0000000000100000-0x00000000bf66cfff]
[    0.025733] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf66cfff]
[    0.025745] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.025836] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.081187] On node 0, zone DMA32: 2451 pages in unavailable ranges
[    0.081211] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
[    0.081540] ACPI: PM-Timer IO Port: 0x1008
[    0.081561] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.081565] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.081585] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.081591] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.081596] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.081606] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.081609] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.081634] CPU topo: Max. logical packages:   1
[    0.081636] CPU topo: Max. logical dies:       1
[    0.081638] CPU topo: Max. dies per package:   1
[    0.081650] CPU topo: Max. threads per core:   1
[    0.081652] CPU topo: Num. cores per package:     2
[    0.081654] CPU topo: Num. threads per package:   2
[    0.081656] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[    0.081682] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.081686] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.081689] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.081693] [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.081697] Booting paravirtualized kernel on bare hardware
[    0.081703] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.099920] setup_percpu: NR_CPUS:320 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.100929] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u1048576
[    0.100944] pcpu-alloc: s233472 r8192 d28672 u1048576 alloc=1*2097152
[    0.100952] pcpu-alloc: [0] 0 1 
[    0.100997] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b27d818a-8bf0-4e8f-8389-b683a66eab5a rw loglevel=3 quiet
[    0.101167] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[    0.104497] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.106398] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.106522] Fallback order for Node 0: 0 
[    0.106537] Built 1 zonelists, mobility grouping on.  Total pages: 783883
[    0.106542] Policy zone: DMA32
[    0.108556] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.160759] Memory: 3014244K/3135532K available (18432K kernel code, 2177K rwdata, 13436K rodata, 3432K init, 3492K bss, 121028K reserved, 0K cma-reserved)
[    0.177580] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.177857] Kernel/User page tables isolation: enabled
[    0.178061] ftrace: allocating 50274 entries in 197 pages
[    0.195867] ftrace: allocated 197 pages with 4 groups
[    0.196226] Dynamic Preempt: full
[    0.196485] rcu: Preemptible hierarchical RCU implementation.
[    0.196487] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
[    0.196490] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.196493] 	Trampoline variant of Tasks RCU enabled.
[    0.196495] 	Rude variant of Tasks RCU enabled.
[    0.196496] 	Tracing variant of Tasks RCU enabled.
[    0.196498] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.196500] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.196515] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.196519] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.196522] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.209126] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
[    0.209450] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.209684] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.209856] Console: colour dummy device 80x25
[    0.209862] printk: legacy console [tty0] enabled
[    0.210706] ACPI: Core revision 20240322
[    0.211142] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.211168] APIC: Switch to symmetric I/O mode setup
[    0.211687] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.227835] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1591035f145, max_idle_ns: 440795218042 ns
[    0.227847] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.02 BogoMIPS (lpj=4987243)
[    0.227883] CPU0: Thermal monitoring enabled (TM2)
[    0.227926] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.227930] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.227937] process: using mwait in idle threads
[    0.227942] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.227947] Spectre V2 : Mitigation: Retpolines
[    0.227949] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.227951] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.227954] Speculative Store Bypass: Vulnerable
[    0.227958] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.227960] MMIO Stale Data: Unknown: No mitigations
[    0.227966] x86/fpu: x87 FPU will use FXSAVE
[    0.270334] Freeing SMP alternatives memory: 40K
[    0.270348] pid_max: default: 32768 minimum: 301
[    0.271848] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[    0.273649] landlock: Up and running.
[    0.273653] Yama: becoming mindful.
[    0.273667] LSM support for eBPF active
[    0.274038] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.274068] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.383955] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz (family: 0x6, model: 0xf, stepping: 0xd)
[    0.384508] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.384508] core: PEBS disabled due to CPU errata
[    0.384508] ... version:                2
[    0.384508] ... bit width:              40
[    0.384508] ... generic registers:      2
[    0.384508] ... value mask:             000000ffffffffff
[    0.384508] ... max period:             000000007fffffff
[    0.384508] ... fixed-purpose events:   3
[    0.384508] ... event mask:             0000000700000003
[    0.384508] signal: max sigframe size: 1440
[    0.384508] rcu: Hierarchical SRCU implementation.
[    0.384508] rcu: 	Max phase no-delay instances is 1000.
[    0.384508] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.384508] smp: Bringing up secondary CPUs ...
[    0.384508] smpboot: x86: Booting SMP configuration:
[    0.384508] .... node  #0, CPUs:      #1
[    0.384651] smp: Brought up 1 node, 2 CPUs
[    0.384651] smpboot: Total of 2 processors activated (5987.05 BogoMIPS)
[    0.388585] devtmpfs: initialized
[    0.388585] x86/mm: Memory block size: 128MB
[    0.389331] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.389350] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.391669] pinctrl core: initialized pinctrl subsystem
[    0.391971] PM: RTC time: 16:46:50, date: 2024-08-16
[    0.394388] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.395088] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.395380] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.395632] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.395674] audit: initializing netlink subsys (disabled)
[    0.395718] audit: type=2000 audit(1723826809.183:1): state=initialized audit_enabled=0 res=1
[    0.395718] thermal_sys: Registered thermal governor 'fair_share'
[    0.395718] thermal_sys: Registered thermal governor 'bang_bang'
[    0.395718] thermal_sys: Registered thermal governor 'step_wise'
[    0.395718] thermal_sys: Registered thermal governor 'user_space'
[    0.395718] thermal_sys: Registered thermal governor 'power_allocator'
[    0.395718] cpuidle: using governor ladder
[    0.395718] cpuidle: using governor menu
[    0.395718] Simple Boot Flag at 0x79 set to 0x1
[    0.395718] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.395718] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[    0.395718] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry
[    0.395718] PCI: Using configuration type 1 for base access
[    0.395718] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.414570] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.414577] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.415352] Demotion targets for Node 0: null
[    0.416093] ACPI: Added _OSI(Module Device)
[    0.416093] ACPI: Added _OSI(Processor Device)
[    0.416093] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.416093] ACPI: Added _OSI(Processor Aggregator Device)
[    0.427975] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.443803] ACPI: Dynamic OEM Table Load:
[    0.443817] ACPI: SSDT 0xFFFF8887C18A9F00 000043 (v01 LMPWR  DELLLOM  00001001 INTL 20050624)
[    0.444900] ACPI: Dynamic OEM Table Load:
[    0.444912] ACPI: SSDT 0xFFFF8887C12EBC00 0001C0 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.445845] ACPI: Dynamic OEM Table Load:
[    0.445857] ACPI: SSDT 0xFFFF8887C19AD000 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.447025] ACPI: Dynamic OEM Table Load:
[    0.447036] ACPI: SSDT 0xFFFF8887C18A8100 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[    0.447727] ACPI: Dynamic OEM Table Load:
[    0.447736] ACPI: SSDT 0xFFFF8887C18BB9C0 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[    0.448607] ACPI: _OSC evaluated successfully for all CPUs
[    0.448879] ACPI: Interpreter enabled
[    0.448910] ACPI: PM: (supports S0 S3 S4 S5)
[    0.448913] ACPI: Using IOAPIC for interrupt routing
[    0.449767] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.449771] PCI: Using E820 reservations for host bridge windows
[    0.450142] ACPI: Enabled 13 GPEs in block 00 to 1F
[    0.590427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.590446] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.590469] acpi PNP0A03:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.608901] PCI host bridge to bus 0000:00
[    0.608907] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.608913] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.608917] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.608921] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.608925] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff window]
[    0.608928] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[    0.608932] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[    0.608935] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window]
[    0.608938] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window]
[    0.608942] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window]
[    0.608945] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window]
[    0.608948] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window]
[    0.608952] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.608990] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 conventional PCI endpoint
[    0.609158] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 conventional PCI endpoint
[    0.609177] pci 0000:00:02.0: BAR 0 [mem 0xfea00000-0xfeafffff 64bit]
[    0.609189] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.609198] pci 0000:00:02.0: BAR 4 [io  0xeff8-0xefff]
[    0.609224] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.609412] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 conventional PCI endpoint
[    0.609429] pci 0000:00:02.1: BAR 0 [mem 0xfeb00000-0xfebfffff 64bit]
[    0.609676] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 conventional PCI endpoint
[    0.609748] pci 0000:00:1a.0: BAR 4 [io  0x6f20-0x6f3f]
[    0.609946] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 conventional PCI endpoint
[    0.610018] pci 0000:00:1a.1: BAR 4 [io  0x6f00-0x6f1f]
[    0.610234] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.610262] pci 0000:00:1a.7: BAR 0 [mem 0xfed1c400-0xfed1c7ff]
[    0.610384] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.610588] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[    0.610621] pci 0000:00:1b.0: BAR 0 [mem 0xfe9fc000-0xfe9fffff 64bit]
[    0.610765] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.611001] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 PCIe Root Port
[    0.611052] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.611183] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.611448] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 PCIe Root Port
[    0.611499] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.611511] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.611628] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.611865] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400 PCIe Root Port
[    0.611916] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.611925] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.611932] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.611950] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.612051] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.612508] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400 PCIe Root Port
[    0.612559] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.612572] pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.612689] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.612924] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 conventional PCI endpoint
[    0.612996] pci 0000:00:1d.0: BAR 4 [io  0x6f80-0x6f9f]
[    0.613208] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 conventional PCI endpoint
[    0.613279] pci 0000:00:1d.1: BAR 4 [io  0x6f60-0x6f7f]
[    0.613486] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 conventional PCI endpoint
[    0.613557] pci 0000:00:1d.2: BAR 4 [io  0x6f40-0x6f5f]
[    0.613773] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 conventional PCI endpoint
[    0.613801] pci 0000:00:1d.7: BAR 0 [mem 0xfed1c000-0xfed1c3ff]
[    0.613923] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.614116] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 conventional PCI bridge
[    0.614165] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.614178] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.614432] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 conventional PCI endpoint
[    0.614571] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.614581] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.614587] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.614596] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.614827] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a conventional PCI endpoint
[    0.614854] pci 0000:00:1f.1: BAR 0 [io  0x01f0-0x01f7]
[    0.614870] pci 0000:00:1f.1: BAR 1 [io  0x03f4-0x03f7]
[    0.614884] pci 0000:00:1f.1: BAR 2 [io  0x0170-0x0177]
[    0.614899] pci 0000:00:1f.1: BAR 3 [io  0x0374-0x0377]
[    0.614913] pci 0000:00:1f.1: BAR 4 [io  0x6fa0-0x6faf]
[    0.614943] pci 0000:00:1f.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    0.614947] pci 0000:00:1f.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    0.614950] pci 0000:00:1f.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    0.614954] pci 0000:00:1f.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    0.615132] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 conventional PCI endpoint
[    0.615159] pci 0000:00:1f.2: BAR 0 [io  0x6eb0-0x6eb7]
[    0.615174] pci 0000:00:1f.2: BAR 1 [io  0x6eb8-0x6ebb]
[    0.615189] pci 0000:00:1f.2: BAR 2 [io  0x6ec0-0x6ec7]
[    0.615203] pci 0000:00:1f.2: BAR 3 [io  0x6ec8-0x6ecb]
[    0.615217] pci 0000:00:1f.2: BAR 4 [io  0x6ee0-0x6eff]
[    0.615231] pci 0000:00:1f.2: BAR 5 [mem 0xfe9fb800-0xfe9fbfff]
[    0.615305] pci 0000:00:1f.2: PME# supported from D3hot
[    0.615475] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 conventional PCI endpoint
[    0.615502] pci 0000:00:1f.3: BAR 0 [mem 0xfe9fb700-0xfe9fb7ff]
[    0.615550] pci 0000:00:1f.3: BAR 4 [io  0x10c0-0x10df]
[    0.615763] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.615905] pci 0000:0c:00.0: [14e4:4311] type 00 class 0x028000 PCIe Legacy Endpoint
[    0.615941] pci 0000:0c:00.0: BAR 0 [mem 0xfe8fc000-0xfe8fffff]
[    0.616053] pci 0000:0c:00.0: enabling Extended Tags
[    0.616168] pci 0000:0c:00.0: supports D1 D2
[    0.616392] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.616416] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.616559] acpiphp: Slot [1] registered
[    0.616569] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.616784] pci 0000:09:00.0: [14e4:1713] type 00 class 0x020000 PCIe Endpoint
[    0.616875] pci 0000:09:00.0: BAR 0 [mem 0xfe5f0000-0xfe5fffff 64bit]
[    0.617080] pci 0000:09:00.0: enabling Extended Tags
[    0.617399] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.617903] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.617952] pci_bus 0000:03: extended config space not accessible
[    0.618045] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via FireWire function)
[    0.618049] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[    0.618053] pci 0000:03:01.0: [1180:0832] type 00 class 0x0c0010 conventional PCI endpoint
[    0.618080] pci 0000:03:01.0: BAR 0 [mem 0xfe4ff800-0xfe4fffff]
[    0.618202] pci 0000:03:01.0: supports D1 D2
[    0.618206] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.618374] pci 0000:03:01.1: [1180:0822] type 00 class 0x080501 conventional PCI endpoint
[    0.618402] pci 0000:03:01.1: BAR 0 [mem 0xfe4ff400-0xfe4ff4ff]
[    0.618524] pci 0000:03:01.1: supports D1 D2
[    0.618527] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.618654] pci 0000:03:01.2: [1180:0592] type 00 class 0x088000 conventional PCI endpoint
[    0.618681] pci 0000:03:01.2: BAR 0 [mem 0xfe4ff600-0xfe4ff6ff]
[    0.618802] pci 0000:03:01.2: supports D1 D2
[    0.618805] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.618913] pci 0000:03:01.3: [1180:0852] type 00 class 0x088000 conventional PCI endpoint
[    0.618941] pci 0000:03:01.3: BAR 0 [mem 0xfe4ff700-0xfe4ff7ff]
[    0.619063] pci 0000:03:01.3: supports D1 D2
[    0.619066] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.619223] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.619241] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.619246] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.619249] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.619253] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.619257] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xf7ffffff window] (subtractive decode)
[    0.619269] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[    0.619273] pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[    0.619276] pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode)
[    0.619280] pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode)
[    0.619284] pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode)
[    0.619287] pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode)
[    0.619291] pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode)
[    0.620211] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.620384] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.620555] ACPI: PCI: Interrupt link LNKC configured for IRQ 4
[    0.620725] ACPI: PCI: Interrupt link LNKD configured for IRQ 5
[    0.620895] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.621065] ACPI: PCI: Interrupt link LNKF configured for IRQ 9
[    0.621248] ACPI: PCI: Interrupt link LNKG configured for IRQ 7
[    0.621396] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.621400] ACPI: PCI: Interrupt link LNKH disabled
[    0.622227] iommu: Default domain type: Translated
[    0.622227] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.624662] SCSI subsystem initialized
[    0.624679] libata version 3.00 loaded.
[    0.624679] ACPI: bus type USB registered
[    0.624679] usbcore: registered new interface driver usbfs
[    0.624679] usbcore: registered new interface driver hub
[    0.624679] usbcore: registered new device driver usb
[    0.624705] EDAC MC: Ver: 3.0.0
[    0.625031] NetLabel: Initializing
[    0.625035] NetLabel:  domain hash size = 128
[    0.625038] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.625074] NetLabel:  unlabeled traffic allowed by default
[    0.625084] mctp: management component transport protocol core
[    0.625087] NET: Registered PF_MCTP protocol family
[    0.625096] PCI: Using ACPI for IRQ routing
[    0.626873] PCI: pci_cache_line_size set to 64 bytes
[    0.626992] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.626997] e820: reserve RAM buffer [mem 0xbf66d800-0xbfffffff]
[    0.627899] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.627899] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.627899] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.627899] vgaarb: loaded
[    0.627928] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.627935] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.627945] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.631176] clocksource: Switched to clocksource tsc-early
[    0.633938] VFS: Disk quotas dquot_6.6.0
[    0.634017] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.634211] pnp: PnP ACPI init
[    0.634627] system 00:03: [io  0x0c80-0x0cff] could not be reserved
[    0.634811] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.635072] pnp 00:05: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635080] pnp 00:05: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635129] system 00:05: [io  0x0900-0x097f] has been reserved
[    0.635135] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.635201] pnp 00:06: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635208] pnp 00:06: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635213] pnp 00:06: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635218] pnp 00:06: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635274] system 00:06: [io  0xf400-0xf4fe] has been reserved
[    0.635280] system 00:06: [io  0x1080-0x10bf] has been reserved
[    0.635284] system 00:06: [io  0x10c0-0x10df] has been reserved
[    0.635288] system 00:06: [io  0x0809] has been reserved
[    0.655965] pnp 00:07: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.656049] system 00:07: [mem 0x00000000-0x0009efff] could not be reserved
[    0.656055] system 00:07: [mem 0x0009f000-0x0009ffff] could not be reserved
[    0.656059] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.656063] system 00:07: [mem 0x00100000-0xbf66d7ff] could not be reserved
[    0.656068] system 00:07: [mem 0xbf66d800-0xbf6fffff] has been reserved
[    0.656073] system 00:07: [mem 0xbf700000-0xbf7fffff] has been reserved
[    0.656077] system 00:07: [mem 0xbf700000-0xbfefffff] could not be reserved
[    0.656082] system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
[    0.656086] system 00:07: [mem 0xffa00000-0xffbfffff] has been reserved
[    0.656090] system 00:07: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.656094] system 00:07: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.656099] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.656103] system 00:07: [mem 0xfeda0000-0xfeda3fff] has been reserved
[    0.656107] system 00:07: [mem 0xfeda4000-0xfeda4fff] has been reserved
[    0.656112] system 00:07: [mem 0xfeda5000-0xfeda5fff] has been reserved
[    0.656116] system 00:07: [mem 0xfeda6000-0xfeda6fff] has been reserved
[    0.656121] system 00:07: [mem 0xfed18000-0xfed1bfff] has been reserved
[    0.656125] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.656248] pnp: PnP ACPI: found 8 devices
[    0.664612] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.665027] NET: Registered PF_INET protocol family
[    0.665294] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.698765] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.698853] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.698945] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.699286] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.699528] TCP: Hash tables configured (established 32768 bind 32768)
[    0.700048] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.700196] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.700254] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.700450] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.700472] NET: Registered PF_XDP protocol family
[    0.700490] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.700501] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[    0.700508] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[    0.700515] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 0c] add_size 1000
[    0.700520] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000
[    0.700528] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
[    0.700541] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[    0.700579] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]: assigned
[    0.700589] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]: assigned
[    0.700597] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]: assigned
[    0.700603] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]: assigned
[    0.700610] pci 0000:00:1c.0: bridge window [io  0x2000-0x2fff]: assigned
[    0.700615] pci 0000:00:1c.1: bridge window [io  0x3000-0x3fff]: assigned
[    0.700620] pci 0000:00:1c.5: bridge window [io  0x4000-0x4fff]: assigned
[    0.700630] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.700636] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.700645] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.700652] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.700663] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.700667] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.700675] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.700682] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.700693] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.700697] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.700706] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.700712] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.700723] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.700727] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.700735] pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.700742] pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.700754] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.700762] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.700776] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.700780] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.700784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.700787] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.700791] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.700794] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.700798] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.700802] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.700805] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.700809] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff window]
[    0.700812] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff window]
[    0.700816] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff window]
[    0.700819] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.700823] pci_bus 0000:0b: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.700826] pci_bus 0000:0b: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.700830] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    0.700834] pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.700837] pci_bus 0000:0c: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.700841] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
[    0.700845] pci_bus 0000:0d: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.700848] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.700852] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.700855] pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.700859] pci_bus 0000:09: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.700863] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.700866] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.700870] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.700873] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.700877] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.700880] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.700884] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.700887] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.700891] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.700895] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.700899] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff window]
[    0.700902] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff window]
[    0.700906] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff window]
[    0.704200] PCI: CLS 64 bytes, default 64
[    0.704378] Trying to unpack rootfs image as initramfs...
[    0.705657] Initialise system trusted keyrings
[    0.705694] Key type blacklist registered
[    0.705893] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[    0.705915] zbud: loaded
[    0.706902] fuse: init (API version 7.40)
[    0.707382] integrity: Platform Keyring initialized
[    0.707403] integrity: Machine keyring initialized
[    0.740546] Key type asymmetric registered
[    0.740559] Asymmetric key parser 'x509' registered
[    0.740713] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.741187] io scheduler mq-deadline registered
[    0.741192] io scheduler kyber registered
[    0.741265] io scheduler bfq registered
[    0.743025] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.743262] Monitor-Mwait will be used to enter C-1 state
[    0.743285] Monitor-Mwait will be used to enter C-2 state
[    0.743299] Monitor-Mwait will be used to enter C-3 state
[    0.743308] ACPI: \_PR_.CPU0: Found 3 idle states
[    0.743924] ACPI: AC: AC Adapter [AC] (on-line)
[    0.744064] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.746795] ACPI: button: Lid Switch [LID]
[    0.746926] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.747032] ACPI: button: Power Button [PBTN]
[    0.747110] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.747162] ACPI: button: Sleep Button [SBTN]
[    0.756193] thermal LNXTHERM:00: registered as thermal_zone0
[    0.756206] ACPI: thermal: Thermal Zone [THM] (25 C)
[    0.756754] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.773709] Non-volatile memory driver v1.3
[    0.773719] Linux agpgart interface v0.103
[    0.773837] ACPI: bus type drm_connector registered
[    0.774787] ahci 0000:00:1f.2: version 3.0
[    0.775517] ahci 0000:00:1f.2: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
[    0.775528] ahci 0000:00:1f.2: 2/3 ports implemented (port mask 0x5)
[    0.775532] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    0.790177] scsi host0: ahci
[    0.796802] scsi host1: ahci
[    0.803462] scsi host2: ahci
[    0.803968] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 24 lpm-pol 3
[    0.803974] ata2: DUMMY
[    0.803978] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 24 lpm-pol 3
[    0.804816] ACPI: battery: Slot [BAT0] (battery present)
[    0.805482] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.805498] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.805512] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.805563] uhci_hcd 0000:00:1a.0: irq 20, io port 0x00006f20
[    0.805931] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.805939] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.805943] usb usb1: Product: UHCI Host Controller
[    0.805947] usb usb1: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.805950] usb usb1: SerialNumber: 0000:00:1a.0
[    0.806262] hub 1-0:1.0: USB hub found
[    0.806279] hub 1-0:1.0: 2 ports detected
[    0.806967] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.806981] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    0.806994] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.807056] uhci_hcd 0000:00:1a.1: irq 21, io port 0x00006f00
[    0.807187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.807193] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.807197] usb usb2: Product: UHCI Host Controller
[    0.807201] usb usb2: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.807204] usb usb2: SerialNumber: 0000:00:1a.1
[    0.807464] hub 2-0:1.0: USB hub found
[    0.807482] hub 2-0:1.0: 2 ports detected
[    0.808038] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.808050] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    0.808084] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.808115] uhci_hcd 0000:00:1d.0: irq 20, io port 0x00006f80
[    0.808236] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.808242] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.808246] usb usb3: Product: UHCI Host Controller
[    0.808250] usb usb3: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.808253] usb usb3: SerialNumber: 0000:00:1d.0
[    0.808494] hub 3-0:1.0: USB hub found
[    0.808511] hub 3-0:1.0: 2 ports detected
[    0.809048] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.809061] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    0.809072] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.809102] uhci_hcd 0000:00:1d.1: irq 21, io port 0x00006f60
[    0.809218] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.809224] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.809228] usb usb4: Product: UHCI Host Controller
[    0.809231] usb usb4: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.809235] usb usb4: SerialNumber: 0000:00:1d.1
[    0.809493] hub 4-0:1.0: USB hub found
[    0.809510] hub 4-0:1.0: 2 ports detected
[    0.810120] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.810132] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    0.810144] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.810189] uhci_hcd 0000:00:1d.2: irq 22, io port 0x00006f40
[    0.810322] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.810329] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.810332] usb usb5: Product: UHCI Host Controller
[    0.810336] usb usb5: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.810340] usb usb5: SerialNumber: 0000:00:1d.2
[    0.813523] hub 5-0:1.0: USB hub found
[    0.813569] hub 5-0:1.0: 2 ports detected
[    0.814073] usbcore: registered new interface driver usbserial_generic
[    0.814087] usbserial: USB Serial support registered for generic
[    0.814339] rtc_cmos 00:02: RTC can wake from S4
[    0.814801] rtc_cmos 00:02: registered as rtc0
[    0.814852] rtc_cmos 00:02: setting system clock to 2024-08-16T16:46:50 UTC (1723826810)
[    0.814922] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.815098] intel_pstate: CPU model not supported
[    0.815138] ledtrig-cpu: registered to indicate activity on CPUs
[    0.815978] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.818500] fbcon: Deferring console take-over
[    0.818515] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.818666] hid: raw HID events driver (C) Jiri Kosina
[    0.818859] drop_monitor: Initializing network drop monitor service
[    0.819418] NET: Registered PF_INET6 protocol family
[    0.867275] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.867302] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    0.867327] ehci-pci 0000:00:1a.7: debug port 1
[    0.871283] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    0.883501] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.883802] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    0.883810] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.883815] usb usb6: Product: EHCI Host Controller
[    0.883820] usb usb6: Manufacturer: Linux 6.10.3-arch1-2 ehci_hcd
[    0.883823] usb usb6: SerialNumber: 0000:00:1a.7
[    0.884420] hub 6-0:1.0: USB hub found
[    0.884447] hub 6-0:1.0: 4 ports detected
[    0.886119] Freeing initrd memory: 14980K
[    0.901954] Segment Routing with IPv6
[    0.901963] RPL Segment Routing with IPv6
[    0.902005] In-situ OAM (IOAM) with IPv6
[    0.902071] NET: Registered PF_PACKET protocol family
[    0.902479] microcode: Current revision: 0x000000a3
[    0.902596] IPI shorthand broadcast: enabled
[    0.908783] sched_clock: Marking stable (905002132, 1678242)->(909551301, -2870927)
[    0.909047] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.909136] registered taskstats version 1
[    0.909474] Loading compiled-in X.509 certificates
[    0.910146] hub 1-0:1.0: USB hub found
[    0.910166] hub 1-0:1.0: 2 ports detected
[    0.919495] Loaded X.509 cert 'Build time autogenerated kernel key: 634e326a06f4fa787244b126c789fbd74e2348e3'
[    0.932106] zswap: loaded using pool zstd/zsmalloc
[    0.932348] Demotion targets for Node 0: null
[    0.933261] Key type .fscrypt registered
[    0.933265] Key type fscrypt-provisioning registered
[    0.934341] PM:   Magic number: 4:149:793
[    0.936945] hub 2-0:1.0: USB hub found
[    0.936972] hub 2-0:1.0: 2 ports detected
[    0.942707] RAS: Correctable Errors collector initialized.
[    0.976765] clk: Disabling unused clocks
[    0.976775] PM: genpd: Disabling unused power domains
[    0.992079] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    0.993007] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    1.004953] ata3: SATA link down (SStatus 0 SControl 300)
[    1.005009] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.039823] ata1.00: ATA-8: WDC WD1200BEVS-75UST0, 01.01A01, max UDMA/133
[    1.039969] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 32), AA
[    1.040900] ata1.00: configured for UDMA/133
[    1.041282] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-7 1A01 PQ: 0 ANSI: 5
[    1.042123] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.042147] sd 0:0:0:0: [sda] Write Protect is off
[    1.042153] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.042185] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.042243] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    1.083994] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[    1.084008] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.084015] usb 3-1: Product:  USB OPTICAL MOUSE
[    1.084765]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    1.085270] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.087273] usb 3-1: USB disconnect, device number 2
[    1.088177] usb 5-1: New USB device found, idVendor=0483, idProduct=2016, bcdDevice= 0.01
[    1.088188] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.088194] usb 5-1: Product: Biometric Coprocessor
[    1.088200] usb 5-1: Manufacturer: STMicroelectronics
[    1.092321] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large:
[    1.092329] clocksource:                       'hpet' wd_nsec: 506846855 wd_now: e3a1ab wd_last: 74e587 mask: ffffffff
[    1.092336] clocksource:                       'tsc-early' cs_nsec: 348963364 cs_now: 4b6c4770f cs_last: 497a5b49a mask: ffffffffffffffff
[    1.092342] clocksource:                       Clocksource 'tsc-early' skewed -157883491 ns (-157 ms) over watchdog 'hpet' interval of 506846855 ns (506 ms)
[    1.092349] clocksource:                       'tsc-early' is current clocksource.
[    1.092357] tsc: Marking TSC unstable due to clocksource watchdog
[    1.092381] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[    1.092386] sched_clock: Marking unstable (1090702543, 1678242)<-(1095251726, -2870927)
[    1.092662] clocksource: Switched to clocksource hpet
[    1.361903] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[    1.528425] usb 5-2: not running at top speed; connect to a high speed hub
[    1.619427] usb 5-2: New USB device found, idVendor=05a9, idProduct=2640, bcdDevice= 1.00
[    1.619437] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.619444] usb 5-2: Product: Laptop Integrated Webcam
[    1.619449] usb 5-2: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3
[    1.624725] usb 5-1: USB disconnect, device number 2
[    1.625046] usb 5-2: USB disconnect, device number 3
[    1.625829] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.625843] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    1.625864] ehci-pci 0000:00:1d.7: debug port 1
[    1.629828] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    1.645231] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.645357] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    1.645366] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.645372] usb usb7: Product: EHCI Host Controller
[    1.645378] usb usb7: Manufacturer: Linux 6.10.3-arch1-2 ehci_hcd
[    1.645383] usb usb7: SerialNumber: 0000:00:1d.7
[    1.645675] hub 7-0:1.0: USB hub found
[    1.645693] hub 7-0:1.0: 6 ports detected
[    1.675356] hub 3-0:1.0: USB hub found
[    1.675396] hub 3-0:1.0: 2 ports detected
[    1.702009] hub 4-0:1.0: USB hub found
[    1.702034] hub 4-0:1.0: 2 ports detected
[    1.728682] hub 5-0:1.0: USB hub found
[    1.728706] hub 5-0:1.0: 2 ports detected
[    1.732775] Freeing unused decrypted memory: 2028K
[    1.735274] Freeing unused kernel image (initmem) memory: 3432K
[    1.735462] Write protecting the kernel read-only data: 32768k
[    1.736549] Freeing unused kernel image (rodata/data gap) memory: 900K
[    1.829025] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.829037] rodata_test: all tests were successful
[    1.829053] x86/mm: Checking user space page tables
[    1.918026] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.918036] Run /init as init process
[    1.918039]   with arguments:
[    1.918042]     /init
[    1.918045]   with environment:
[    1.918047]     HOME=/
[    1.918049]     TERM=linux
[    1.918051]     BOOT_IMAGE=/boot/vmlinuz-linux
[    2.042869] usb 3-1: new low-speed USB device number 3 using uhci_hcd
[    2.231285] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[    2.231300] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.231304] usb 3-1: Product:  USB OPTICAL MOUSE
[    2.289630] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQBC data block query control method not found
[    2.299976] usbcore: registered new interface driver usbhid
[    2.299986] usbhid: USB HID core driver
[    2.329333] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.336532] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.336669] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.362513] ata_piix 0000:00:1f.1: version 2.13
[    2.370158] scsi host3: ata_piix
[    2.370511] scsi host4: ata_piix
[    2.370609] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 lpm-pol 0
[    2.370614] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 lpm-pol 0
[    2.545453] ata4.00: ATAPI: HL-DT-ST DVDRW  GSA-S10N, A100, max UDMA/33
[    2.575214] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRW  GSA-S10N  A100 PQ: 0 ANSI: 5
[    2.724338] sdhci: Secure Digital Host Controller Interface driver
[    2.724347] sdhci: Copyright(c) Pierre Ossman
[    2.791304] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
[    2.792080] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    2.793053] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[    2.794156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.805126] firewire_ohci 0000:03:01.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.818564] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
[    2.848414] usb 5-1: new full-speed USB device number 4 using uhci_hcd
[    2.854375] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[    2.854385] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.888880] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.895449] b43-pci-bridge 0000:0c:00.0: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
[    3.037500] usb 5-1: New USB device found, idVendor=0483, idProduct=2016, bcdDevice= 0.01
[    3.037525] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.037529] usb 5-1: Product: Biometric Coprocessor
[    3.037534] usb 5-1: Manufacturer: STMicroelectronics
[    3.332106] firewire_core 0000:03:01.0: created device fw0: GUID 464fc00016568da1, S400
[    3.541722] usb 7-6: new high-speed USB device number 4 using ehci-pci
[    3.693523] usb 7-6: New USB device found, idVendor=05a9, idProduct=2640, bcdDevice= 1.00
[    3.693532] usb 7-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.693537] usb 7-6: Product: Laptop Integrated Webcam
[    3.693541] usb 7-6: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3
[    4.171143] pci 0000:00:00.0: Intel 965GM Chipset
[    4.171189] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    4.171542] pci 0000:00:00.0: detected 8192K stolen memory
[    4.198952] i915 0000:00:02.0: vgaarb: deactivate vga console
[    4.329657] i915 0000:00:02.0: [drm] Initialized overlay support.
[    4.330503] i915 0000:00:02.0: [drm] Skipping intel_backlight registration
[    4.330662] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1
[    4.331035] ACPI: video: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[    4.335977] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input5
[    4.336130] ACPI: video: [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    4.352682] acpi device:34: registered as cooling_device2
[    4.376347] fbcon: i915drmfb (fb0) is primary device
[    4.376354] fbcon: Deferring console take-over
[    4.376362] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    4.434342] fbcon: Taking over console
[    5.251537] Console: switching to colour frame buffer device 160x50
[    5.974562] EXT4-fs (sda2): mounted filesystem b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w with ordered data mode. Quota mode: none.
[    7.589570] random: crng init done
[    7.739569] systemd[1]: systemd 256.4-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[    7.739588] systemd[1]: Detected architecture x86-64.
[    7.775818] systemd[1]: Hostname set to <daidacorp>.
[    8.208769] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[    9.314363] (sd-exec-[236]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[   10.239254] systemd[1]: Queued start job for default target Graphical Interface.
[   10.325443] systemd[1]: Created slice Slice /system/dirmngr.
[   10.326543] systemd[1]: Created slice Slice /system/getty.
[   10.327487] systemd[1]: Created slice Slice /system/gpg-agent.
[   10.328478] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[   10.329447] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[   10.330385] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[   10.331320] systemd[1]: Created slice Slice /system/keyboxd.
[   10.332321] systemd[1]: Created slice Slice /system/modprobe.
[   10.333269] systemd[1]: Created slice Slice /system/systemd-fsck.
[   10.333984] systemd[1]: Created slice User and Session Slice.
[   10.334185] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   10.334344] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.334807] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.334884] systemd[1]: Expecting device /dev/sda1...
[   10.334920] systemd[1]: Expecting device /dev/sda6...
[   10.334967] systemd[1]: Reached target Local Encrypted Volumes.
[   10.335052] systemd[1]: Reached target Login Prompts.
[   10.335114] systemd[1]: Reached target Local Integrity Protected Volumes.
[   10.335191] systemd[1]: Reached target Remote File Systems.
[   10.335246] systemd[1]: Reached target Slice Units.
[   10.335311] systemd[1]: Reached target Swaps.
[   10.335379] systemd[1]: Reached target Local Verity Protected Volumes.
[   10.335614] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   10.340261] systemd[1]: Listening on Process Core Dump Socket.
[   10.342816] systemd[1]: Listening on Credential Encryption/Decryption.
[   10.343099] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.343353] systemd[1]: Listening on Journal Sockets.
[   10.343428] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.343481] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.343706] systemd[1]: Listening on udev Control Socket.
[   10.343883] systemd[1]: Listening on udev Kernel Socket.
[   10.344082] systemd[1]: Listening on User Database Manager Socket.
[   10.357074] systemd[1]: Mounting Huge Pages File System...
[   10.359010] systemd[1]: Mounting POSIX Message Queue File System...
[   10.365395] systemd[1]: Mounting Kernel Debug File System...
[   10.367581] systemd[1]: Mounting Kernel Trace File System...
[   10.401403] systemd[1]: Mounting Temporary Directory /tmp...
[   10.405380] systemd[1]: Starting Create List of Static Device Nodes...
[   10.410713] systemd[1]: Starting Load Kernel Module configfs...
[   10.425376] systemd[1]: Starting Load Kernel Module dm_mod...
[   10.432265] systemd[1]: Starting Load Kernel Module drm...
[   10.455476] systemd[1]: Starting Load Kernel Module fuse...
[   10.462081] systemd[1]: Starting Load Kernel Module loop...
[   10.462233] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[   10.462343] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[   10.471511] systemd[1]: Starting Journal Service...
[   10.535384] systemd[1]: Starting Load Kernel Modules...
[   10.535451] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.537547] systemd[1]: Starting Remount Root and Kernel File Systems...
[   10.537662] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.545789] systemd[1]: Starting Load udev Rules from Credentials...
[   10.555544] systemd[1]: Starting Coldplug All udev Devices...
[   10.571112] loop: module loaded
[   10.573813] systemd[1]: Mounted Huge Pages File System.
[   10.574471] systemd[1]: Mounted POSIX Message Queue File System.
[   10.574765] systemd[1]: Mounted Kernel Debug File System.
[   10.575087] systemd[1]: Mounted Kernel Trace File System.
[   10.575353] systemd[1]: Mounted Temporary Directory /tmp.
[   10.581898] systemd[1]: Finished Create List of Static Device Nodes.
[   10.582895] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   10.583545] systemd[1]: Finished Load Kernel Module configfs.
[   10.585440] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   10.585970] systemd[1]: Finished Load Kernel Module drm.
[   10.586751] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   10.587258] systemd[1]: Finished Load Kernel Module fuse.
[   10.587993] systemd[1]: modprobe@loop.service: Deactivated successfully.
[   10.588589] systemd[1]: Finished Load Kernel Module loop.
[   10.591440] systemd[1]: Mounting FUSE Control File System...
[   10.595349] systemd[1]: Mounting Kernel Configuration File System...
[   10.612179] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[   10.619659] systemd[1]: Mounted FUSE Control File System.
[   10.637379] EXT4-fs (sda2): re-mounted b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w. Quota mode: none.
[   10.638440] EXT4-fs (sda2): re-mounted b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w. Quota mode: none.
[   10.643026] systemd[1]: Finished Remount Root and Kernel File Systems.
[   10.643530] systemd[1]: Mounted Kernel Configuration File System.
[   10.694780] systemd-journald[263]: Collecting audit messages is disabled.
[   10.785618] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[   10.792686] systemd[1]: Starting Load/Save OS Random Seed...
[   10.792754] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.811790] systemd[1]: Finished Load udev Rules from Credentials.
[   10.875422] device-mapper: uevent: version 1.0.3
[   10.875623] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[   10.877587] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   10.878210] systemd[1]: Finished Load Kernel Module dm_mod.
[   10.878662] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[   10.881327] systemd[1]: Started Journal Service.
[   11.441748] systemd-journald[263]: Received client request to flush runtime journal.
[   14.935629] input: Quickstart Button 0 as /devices/platform/PNP0C32:00/input/input6
[   15.172423] r592: driver successfully loaded
[   15.192512] pps_core: LinuxPPS API ver. 1 registered
[   15.192524] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   15.244722] PTP clock support registered
[   15.306579] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[   15.336286] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   15.353826] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input7
[   15.436441] mc: Linux media interface: v0.10
[   15.483446] tg3 0000:09:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:15:c5:7d:7f:41
[   15.483461] tg3 0000:09:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
[   15.483467] tg3 0000:09:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[   15.483472] tg3 0000:09:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   15.491673] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   15.549696] i2c i2c-9: Successfully instantiated SPD at 0x50
[   15.654581] videodev: Linux video capture interface: v2.00
[   15.925675] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   15.959854] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0001/input/input10
[   15.965496] hid-generic 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[   15.972862] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   15.993102] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   15.993686] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   16.130936] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04753/0x200000/0x0/0x0, board id: 0, fw id: 356587
[   16.168563] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   16.187586] iTCO_vendor_support: vendor-support=0
[   16.254646] gpio_ich gpio_ich.2.auto: GPIO from 528 to 577
[   16.265084] at24 9-0050: supply vcc not found, using dummy regulator
[   16.266506] at24 9-0050: 256 byte spd EEPROM, read-only
[   16.339252] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   16.339274] cfg80211: failed to load regulatory.db
[   16.377624] iTCO_wdt iTCO_wdt.1.auto: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[   16.378194] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[   16.430373] usb 7-6: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[   16.438709] usbcore: registered new interface driver uvcvideo
[   16.464790] mousedev: PS/2 mouse device common for all mice
[   16.501808] tg3 0000:09:00.0 enp9s0: renamed from eth0
[   17.819287] intel_powerclamp: No package C-state available
[   17.828195] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9228: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   17.828213] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.828221] snd_hda_codec_idt hdaudioC0D0:    hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
[   17.828229] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   17.828234] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x21/0x0
[   17.828240] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   17.828245] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x13
[   17.828251] snd_hda_codec_idt hdaudioC0D0:      Mic=0xe
[   17.872966] input: HDA Intel Front Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.873131] input: HDA Intel Front Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.873253] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   18.172056] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[   18.208399] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8
[   18.208428] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
[   18.221931] Broadcom 43xx driver loaded [ Features: PNLS ]
[   18.243422] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
[   18.243496] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
[   18.243575] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
[   18.243625] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
[   18.243632] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[   18.243636] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
[   18.243639] b43-phy0 ERROR: You must go to [url]https://wireless.wiki.kernel.org/en/users/Drivers/b43#devicefirmware[/url] and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   19.363621] EXT4-fs (sda1): mounted filesystem dde6e24e-f350-4f06-8f21-35215fa2af0d r/w with ordered data mode. Quota mode: none.
[   20.916078] EXT4-fs (sda6): mounted filesystem 50c8a8e2-b9f7-453f-8fe3-d44576578952 r/w with ordered data mode. Quota mode: none.
[   42.828767] usb usb3-port1: disabled by hub (EMI?), re-enabling...
[   42.828790] usb 3-1: USB disconnect, device number 3
[   43.161754] usb 3-1: new low-speed USB device number 4 using uhci_hcd
[   43.347294] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[   43.347309] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   43.347313] usb 3-1: Product:  USB OPTICAL MOUSE
[   43.365036] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0002/input/input14
[   43.367965] hid-generic 0003:15D9:0A4C.0002: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[   47.675034] rfkill: input handler disabled
[  192.819188] rfkill: input handler enabled
[  201.246865] rfkill: input handler disabled
[  204.585151] usb usb3-port1: disabled by hub (EMI?), re-enabling...
[  204.585169] usb 3-1: USB disconnect, device number 4
[  204.925107] usb 3-1: new low-speed USB device number 5 using uhci_hcd
[  205.538537] usb 3-1: device descriptor read/64, error -71
[  205.840343] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[  205.840357] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  205.840362] usb 3-1: Product:  USB OPTICAL MOUSE
[  205.857959] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0003/input/input15
[  205.858196] hid-generic 0003:15D9:0A4C.0003: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[  430.048526] usb 7-2: new high-speed USB device number 6 using ehci-pci
[  430.206890] usb 7-2: New USB device found, idVendor=1bcf, idProduct=0c31, bcdDevice= 1.32
[  430.206908] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  430.206915] usb 7-2: Product: USB to Serial-ATA bridge
[  430.206921] usb 7-2: Manufacturer: Sunplus Innovation Technology 
[  430.206926] usb 7-2: SerialNumber: FF9160821A0000000000005FA2FFFF
[  430.352233] usb-storage 7-2:1.0: USB Mass Storage device detected
[  430.352633] scsi host5: usb-storage 7-2:1.0
[  430.352827] usbcore: registered new interface driver usb-storage
[  430.378113] usbcore: registered new interface driver uas
[  431.363169] scsi 5:0:0:0: Direct-Access     ST916082 1AS              0200 PQ: 0 ANSI: 4
[  431.386590] sd 5:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[  431.393568] sd 5:0:0:0: [sdb] Write Protect is off
[  431.393576] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00
[  431.400573] sd 5:0:0:0: [sdb] No Caching mode page found
[  431.400580] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  431.454963]  sdb: sdb1 sdb2 < sdb5 >
[  431.455601] sd 5:0:0:0: [sdb] Attached SCSI disk
[  487.957000] EXT4-fs (sdb1): warning: checktime reached, running e2fsck is recommended
[  487.959605] EXT4-fs (sdb1): mounted filesystem fccd9248-e76d-43c3-b247-8a4357c0d996 r/w with ordered data mode. Quota mode: none.
[  666.543162] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
[ 1013.283994] perf: interrupt took too long (3137 > 3130), lowering kernel.perf_event_max_sample_rate to 63600
[ 1295.471614] perf: interrupt took too long (3930 > 3921), lowering kernel.perf_event_max_sample_rate to 50700
[ 1658.492640] perf: interrupt took too long (4949 > 4912), lowering kernel.perf_event_max_sample_rate to 40200
[ 4346.239648] usb 3-1: input irq status -75 received
[ 4346.318113] usb usb3-port1: disabled by hub (EMI?), re-enabling...
[ 4346.318133] usb 3-1: USB disconnect, device number 5
[ 4346.681449] usb 3-1: new low-speed USB device number 6 using uhci_hcd
[ 4346.877681] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[ 4346.877699] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4346.877705] usb 3-1: Product:  USB OPTICAL MOUSE
[ 4346.897161] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0004/input/input16
[ 4346.898030] hid-generic 0003:15D9:0A4C.0004: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[ 4350.081548] usb usb3-port1: disabled by hub (EMI?), re-enabling...
[ 4350.081571] usb 3-1: USB disconnect, device number 6
[ 4350.428124] usb 3-1: new low-speed USB device number 7 using uhci_hcd
[ 4350.623687] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[ 4350.623706] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4350.623713] usb 3-1: Product:  USB OPTICAL MOUSE
[ 4350.641347] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0005/input/input17
[ 4350.641670] hid-generic 0003:15D9:0A4C.0005: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[ 4994.588210] usb 3-1: USB disconnect, device number 7
[ 4996.734706] usb 7-1: new high-speed USB device number 7 using ehci-pci
[ 4996.896509] usb 7-1: New USB device found, idVendor=0bda, idProduct=8189, bcdDevice= 2.00
[ 4996.896528] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4996.896535] usb 7-1: Product: RTL8187B_WLAN_Adapter
[ 4996.896541] usb 7-1: Manufacturer: Manufacturer_Realtek
[ 4996.896546] usb 7-1: SerialNumber: 00e04c000001
[ 4997.350930] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 4997.354338] ieee80211 phy1: hwaddr 08:10:74:64:f7:df, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[ 4997.387918] rtl8187: Customer ID is 0x00
[ 4997.388889] rtl8187: wireless switch is on
[ 4997.389023] usbcore: registered new interface driver rtl8187
[ 4997.417091] rtl8187 7-1:1.0 wlp0s29f7u1: renamed from wlan0
[ 5014.473420] wlp0s29f7u1: authenticate with 6e:91:b7:44:b3:b0 (local address=08:10:74:64:f7:df)
[ 5014.473436] wlp0s29f7u1: send auth to 6e:91:b7:44:b3:b0 (try 1/3)
[ 5014.478055] wlp0s29f7u1: authenticated
[ 5014.484602] wlp0s29f7u1: associate with 6e:91:b7:44:b3:b0 (try 1/3)
[ 5014.492124] wlp0s29f7u1: RX AssocResp from 6e:91:b7:44:b3:b0 (capab=0x411 status=0 aid=1)
[ 5014.496530] wlp0s29f7u1: associated
[ 7266.374608] perf: interrupt took too long (6217 > 6186), lowering kernel.perf_event_max_sample_rate to 32100
[ 7908.171394] rfkill: input handler enabled
[ 7914.169026] rfkill: input handler disabled
[ 7938.369627] rfkill: input handler enabled
[ 7942.594927] rfkill: input handler disabled
[ 9496.108967] EXT4-fs (sdb1): unmounting filesystem fccd9248-e76d-43c3-b247-8a4357c0d996.
[ 9509.422176] usb 7-2: USB disconnect, device number 6
[ 9509.720833] usb 7-2: new high-speed USB device number 8 using ehci-pci
[ 9510.134255] usb 7-2: device descriptor read/64, error -71
[ 9519.240930] usb 3-2: new low-speed USB device number 8 using uhci_hcd
[ 9519.430393] usb 3-2: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[ 9519.430418] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9519.430424] usb 3-2: Product:  USB OPTICAL MOUSE
[ 9519.452918] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/0003:15D9:0A4C.0006/input/input18
[ 9519.453314] hid-generic 0003:15D9:0A4C.0006: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
[ 9536.077667] usb usb3-port2: disabled by hub (EMI?), re-enabling...
[ 9536.077706] usb 3-2: USB disconnect, device number 8
[ 9536.394479] usb 3-2: new low-speed USB device number 9 using uhci_hcd
[ 9536.583281] usb 3-2: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[ 9536.583295] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9536.583299] usb 3-2: Product:  USB OPTICAL MOUSE
[ 9536.600850] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/0003:15D9:0A4C.0007/input/input19
[ 9536.601369] hid-generic 0003:15D9:0A4C.0007: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0

Last edited by daidahan (2024-08-28 11:55:11)

daidahan · 2024-08-17 18:20:28

sorry this is log correct

[    0.000000] Linux version 6.10.3-arch1-2 (linux@archlinux) (gcc (GCC) 14.2.1 20240805, GNU ld (GNU Binutils) 2.43.0) #1 SMP PREEMPT_DYNAMIC Tue, 06 Aug 2024 07:21:19 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b27d818a-8bf0-4e8f-8389-b683a66eab5a rw loglevel=3 quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf66d7ff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf66d800-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Dell Inc. XPS M1330                       /0N6705, BIOS A11 06/19/2008
[    0.000000] DMI: Memory slots populated: 2/2
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1496.326 MHz processor
[    0.002381] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002388] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002401] last_pfn = 0xbf66d max_arch_pfn = 0x400000000
[    0.002426] total RAM covered: 3063M
[    0.002817] Found optimal setting for mtrr clean up
[    0.002819]  gran_size: 64K 	chunk_size: 16M 	num_reg: 4  	lose cover RAM: 0G
[    0.002830] MTRR map: 7 entries (5 fixed + 2 variable; max 21), built from 8 variable MTRRs
[    0.002835] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.024987] RAMDISK: [mem 0x362ad000-0x3714dfff]
[    0.025091] ACPI: Early table checksum verification disabled
[    0.025099] ACPI: RSDP 0x00000000000FBBF0 000024 (v02 DELL  )
[    0.025108] ACPI: XSDT 0x00000000BF66F200 00005C (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025121] ACPI: FACP 0x00000000BF66F09C 0000F4 (v04 DELL   M08      27D80613 ASL  00000061)
[    0.025134] ACPI: DSDT 0x00000000BF66F800 005733 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.025143] ACPI: FACS 0x00000000BF67E000 000040
[    0.025150] ACPI: FACS 0x00000000BF67E000 000040
[    0.025157] ACPI: HPET 0x00000000BF66F300 000038 (v01 DELL   M08      00000001 ASL  00000061)
[    0.025166] ACPI: APIC 0x00000000BF66F400 000068 (v01 DELL   M08      27D80613 ASL  00000047)
[    0.025174] ACPI: MCFG 0x00000000BF66F3C0 00003E (v16 DELL   M08      27D80613 ASL  00000061)
[    0.025183] ACPI: SLIC 0x00000000BF66F49C 000176 (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025191] ACPI: BOOT 0x00000000BF66EFC0 000028 (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025199] ACPI: SSDT 0x00000000BF66DA82 0004CC (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.025206] ACPI: Reserving FACP table memory at [mem 0xbf66f09c-0xbf66f18f]
[    0.025209] ACPI: Reserving DSDT table memory at [mem 0xbf66f800-0xbf674f32]
[    0.025212] ACPI: Reserving FACS table memory at [mem 0xbf67e000-0xbf67e03f]
[    0.025214] ACPI: Reserving FACS table memory at [mem 0xbf67e000-0xbf67e03f]
[    0.025217] ACPI: Reserving HPET table memory at [mem 0xbf66f300-0xbf66f337]
[    0.025219] ACPI: Reserving APIC table memory at [mem 0xbf66f400-0xbf66f467]
[    0.025222] ACPI: Reserving MCFG table memory at [mem 0xbf66f3c0-0xbf66f3fd]
[    0.025224] ACPI: Reserving SLIC table memory at [mem 0xbf66f49c-0xbf66f611]
[    0.025226] ACPI: Reserving BOOT table memory at [mem 0xbf66efc0-0xbf66efe7]
[    0.025229] ACPI: Reserving SSDT table memory at [mem 0xbf66da82-0xbf66df4d]
[    0.025349] No NUMA configuration found
[    0.025351] Faking a node at [mem 0x0000000000000000-0x00000000bf66cfff]
[    0.025357] NODE_DATA(0) allocated [mem 0xbf668000-0xbf66cfff]
[    0.025415] Zone ranges:
[    0.025417]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.025421]   DMA32    [mem 0x0000000001000000-0x00000000bf66cfff]
[    0.025425]   Normal   empty
[    0.025428]   Device   empty
[    0.025431] Movable zone start for each node
[    0.025433] Early memory node ranges
[    0.025434]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.025437]   node   0: [mem 0x0000000000100000-0x00000000bf66cfff]
[    0.025442] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf66cfff]
[    0.025454] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.025546] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.070340] On node 0, zone DMA32: 2451 pages in unavailable ranges
[    0.070359] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
[    0.070692] ACPI: PM-Timer IO Port: 0x1008
[    0.070717] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.070722] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.070742] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.070748] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.070753] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.070764] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.070766] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.070792] CPU topo: Max. logical packages:   1
[    0.070794] CPU topo: Max. logical dies:       1
[    0.070796] CPU topo: Max. dies per package:   1
[    0.070809] CPU topo: Max. threads per core:   1
[    0.070811] CPU topo: Num. cores per package:     2
[    0.070812] CPU topo: Num. threads per package:   2
[    0.070814] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[    0.070841] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.070847] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.070849] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.070854] [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.070857] Booting paravirtualized kernel on bare hardware
[    0.070864] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.089140] setup_percpu: NR_CPUS:320 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.090191] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u1048576
[    0.090207] pcpu-alloc: s233472 r8192 d28672 u1048576 alloc=1*2097152
[    0.090216] pcpu-alloc: [0] 0 1 
[    0.090261] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b27d818a-8bf0-4e8f-8389-b683a66eab5a rw loglevel=3 quiet
[    0.090439] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[    0.093782] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.095687] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.095816] Fallback order for Node 0: 0 
[    0.095833] Built 1 zonelists, mobility grouping on.  Total pages: 783883
[    0.095838] Policy zone: DMA32
[    0.097887] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.150091] Memory: 3014248K/3135532K available (18432K kernel code, 2177K rwdata, 13436K rodata, 3432K init, 3492K bss, 121024K reserved, 0K cma-reserved)
[    0.166916] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.167195] Kernel/User page tables isolation: enabled
[    0.167402] ftrace: allocating 50274 entries in 197 pages
[    0.185504] ftrace: allocated 197 pages with 4 groups
[    0.185876] Dynamic Preempt: full
[    0.186135] rcu: Preemptible hierarchical RCU implementation.
[    0.186138] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
[    0.186141] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.186144] 	Trampoline variant of Tasks RCU enabled.
[    0.186146] 	Rude variant of Tasks RCU enabled.
[    0.186147] 	Tracing variant of Tasks RCU enabled.
[    0.186149] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.186151] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.186166] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.186170] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.186173] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.198795] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
[    0.199117] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.199355] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.199527] Console: colour dummy device 80x25
[    0.199533] printk: legacy console [tty0] enabled
[    0.200379] ACPI: Core revision 20240322
[    0.200816] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.200843] APIC: Switch to symmetric I/O mode setup
[    0.201361] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.217509] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x159193f0588, max_idle_ns: 440795204513 ns
[    0.217520] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.34 BogoMIPS (lpj=4987753)
[    0.217557] CPU0: Thermal monitoring enabled (TM2)
[    0.217602] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.217606] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.217613] process: using mwait in idle threads
[    0.217619] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.217624] Spectre V2 : Mitigation: Retpolines
[    0.217626] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.217628] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.217630] Speculative Store Bypass: Vulnerable
[    0.217634] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.217636] MMIO Stale Data: Unknown: No mitigations
[    0.217642] x86/fpu: x87 FPU will use FXSAVE
[    0.260248] Freeing SMP alternatives memory: 40K
[    0.260264] pid_max: default: 32768 minimum: 301
[    0.261769] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[    0.263571] landlock: Up and running.
[    0.263575] Yama: becoming mindful.
[    0.263591] LSM support for eBPF active
[    0.263967] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.263999] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.373989] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz (family: 0x6, model: 0xf, stepping: 0xd)
[    0.374182] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.374182] core: PEBS disabled due to CPU errata
[    0.374182] ... version:                2
[    0.374182] ... bit width:              40
[    0.374182] ... generic registers:      2
[    0.374182] ... value mask:             000000ffffffffff
[    0.374182] ... max period:             000000007fffffff
[    0.374182] ... fixed-purpose events:   3
[    0.374182] ... event mask:             0000000700000003
[    0.374182] signal: max sigframe size: 1440
[    0.374182] rcu: Hierarchical SRCU implementation.
[    0.374182] rcu: 	Max phase no-delay instances is 1000.
[    0.374182] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.374182] smp: Bringing up secondary CPUs ...
[    0.374182] smpboot: x86: Booting SMP configuration:
[    0.374182] .... node  #0, CPUs:      #1
[    0.374327] smp: Brought up 1 node, 2 CPUs
[    0.374327] smpboot: Total of 2 processors activated (5987.69 BogoMIPS)
[    0.378269] devtmpfs: initialized
[    0.378269] x86/mm: Memory block size: 128MB
[    0.379007] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.379027] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.381378] pinctrl core: initialized pinctrl subsystem
[    0.381683] PM: RTC time: 17:43:42, date: 2024-08-17
[    0.384105] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.384812] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.385106] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.385361] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.385404] audit: initializing netlink subsys (disabled)
[    0.385449] audit: type=2000 audit(1723916622.183:1): state=initialized audit_enabled=0 res=1
[    0.385449] thermal_sys: Registered thermal governor 'fair_share'
[    0.385449] thermal_sys: Registered thermal governor 'bang_bang'
[    0.385449] thermal_sys: Registered thermal governor 'step_wise'
[    0.385449] thermal_sys: Registered thermal governor 'user_space'
[    0.385449] thermal_sys: Registered thermal governor 'power_allocator'
[    0.385449] cpuidle: using governor ladder
[    0.385449] cpuidle: using governor menu
[    0.385449] Simple Boot Flag at 0x79 set to 0x1
[    0.385449] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.385449] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[    0.385449] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry
[    0.385449] PCI: Using configuration type 1 for base access
[    0.385449] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.397587] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.397593] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.399673] Demotion targets for Node 0: null
[    0.406412] ACPI: Added _OSI(Module Device)
[    0.406417] ACPI: Added _OSI(Processor Device)
[    0.406420] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.406423] ACPI: Added _OSI(Processor Aggregator Device)
[    0.414233] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.430119] ACPI: Dynamic OEM Table Load:
[    0.430135] ACPI: SSDT 0xFFFF92C601B49A20 000043 (v01 LMPWR  DELLLOM  00001001 INTL 20050624)
[    0.431225] ACPI: Dynamic OEM Table Load:
[    0.431236] ACPI: SSDT 0xFFFF92C6012EAC00 0001C0 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.432163] ACPI: Dynamic OEM Table Load:
[    0.432174] ACPI: SSDT 0xFFFF92C6019A9800 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.433344] ACPI: Dynamic OEM Table Load:
[    0.433354] ACPI: SSDT 0xFFFF92C601B36900 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[    0.434053] ACPI: Dynamic OEM Table Load:
[    0.434063] ACPI: SSDT 0xFFFF92C601B67D80 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[    0.434932] ACPI: _OSC evaluated successfully for all CPUs
[    0.435193] ACPI: Interpreter enabled
[    0.435223] ACPI: PM: (supports S0 S3 S4 S5)
[    0.435227] ACPI: Using IOAPIC for interrupt routing
[    0.436078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.436082] PCI: Using E820 reservations for host bridge windows
[    0.436443] ACPI: Enabled 13 GPEs in block 00 to 1F
[    0.577147] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.577167] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.577190] acpi PNP0A03:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.595287] PCI host bridge to bus 0000:00
[    0.595293] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.595299] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.595303] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.595307] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.595311] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff window]
[    0.595315] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[    0.595318] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[    0.595322] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window]
[    0.595325] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window]
[    0.595328] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window]
[    0.595339] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window]
[    0.595343] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window]
[    0.595347] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.595385] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 conventional PCI endpoint
[    0.595547] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 conventional PCI endpoint
[    0.595565] pci 0000:00:02.0: BAR 0 [mem 0xfea00000-0xfeafffff 64bit]
[    0.595578] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.595587] pci 0000:00:02.0: BAR 4 [io  0xeff8-0xefff]
[    0.595613] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.595809] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 conventional PCI endpoint
[    0.595827] pci 0000:00:02.1: BAR 0 [mem 0xfeb00000-0xfebfffff 64bit]
[    0.596073] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 conventional PCI endpoint
[    0.596145] pci 0000:00:1a.0: BAR 4 [io  0x6f20-0x6f3f]
[    0.596359] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 conventional PCI endpoint
[    0.596430] pci 0000:00:1a.1: BAR 4 [io  0x6f00-0x6f1f]
[    0.596667] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.596694] pci 0000:00:1a.7: BAR 0 [mem 0xfed1c400-0xfed1c7ff]
[    0.596817] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.597020] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[    0.597054] pci 0000:00:1b.0: BAR 0 [mem 0xfe9fc000-0xfe9fffff 64bit]
[    0.597198] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.597422] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 PCIe Root Port
[    0.597472] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.597605] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.597845] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 PCIe Root Port
[    0.597895] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.597908] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.598025] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.598259] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400 PCIe Root Port
[    0.598309] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.598318] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.598325] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.598343] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.598445] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.598908] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400 PCIe Root Port
[    0.598959] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.598972] pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.599089] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.599311] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 conventional PCI endpoint
[    0.599383] pci 0000:00:1d.0: BAR 4 [io  0x6f80-0x6f9f]
[    0.599597] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 conventional PCI endpoint
[    0.599670] pci 0000:00:1d.1: BAR 4 [io  0x6f60-0x6f7f]
[    0.599868] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 conventional PCI endpoint
[    0.599940] pci 0000:00:1d.2: BAR 4 [io  0x6f40-0x6f5f]
[    0.600156] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 conventional PCI endpoint
[    0.600183] pci 0000:00:1d.7: BAR 0 [mem 0xfed1c000-0xfed1c3ff]
[    0.600305] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.600498] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 conventional PCI bridge
[    0.600547] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.600560] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.600805] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 conventional PCI endpoint
[    0.600944] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.600954] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.600961] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.600970] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.601191] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a conventional PCI endpoint
[    0.601218] pci 0000:00:1f.1: BAR 0 [io  0x01f0-0x01f7]
[    0.601233] pci 0000:00:1f.1: BAR 1 [io  0x03f4-0x03f7]
[    0.601248] pci 0000:00:1f.1: BAR 2 [io  0x0170-0x0177]
[    0.601262] pci 0000:00:1f.1: BAR 3 [io  0x0374-0x0377]
[    0.601276] pci 0000:00:1f.1: BAR 4 [io  0x6fa0-0x6faf]
[    0.601306] pci 0000:00:1f.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    0.601310] pci 0000:00:1f.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    0.601314] pci 0000:00:1f.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    0.601317] pci 0000:00:1f.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    0.601506] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 conventional PCI endpoint
[    0.601532] pci 0000:00:1f.2: BAR 0 [io  0x6eb0-0x6eb7]
[    0.601547] pci 0000:00:1f.2: BAR 1 [io  0x6eb8-0x6ebb]
[    0.601561] pci 0000:00:1f.2: BAR 2 [io  0x6ec0-0x6ec7]
[    0.601576] pci 0000:00:1f.2: BAR 3 [io  0x6ec8-0x6ecb]
[    0.601590] pci 0000:00:1f.2: BAR 4 [io  0x6ee0-0x6eff]
[    0.601604] pci 0000:00:1f.2: BAR 5 [mem 0xfe9fb800-0xfe9fbfff]
[    0.601679] pci 0000:00:1f.2: PME# supported from D3hot
[    0.601858] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 conventional PCI endpoint
[    0.601885] pci 0000:00:1f.3: BAR 0 [mem 0xfe9fb700-0xfe9fb7ff]
[    0.601933] pci 0000:00:1f.3: BAR 4 [io  0x10c0-0x10df]
[    0.602170] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.602312] pci 0000:0c:00.0: [14e4:4311] type 00 class 0x028000 PCIe Legacy Endpoint
[    0.602348] pci 0000:0c:00.0: BAR 0 [mem 0xfe8fc000-0xfe8fffff]
[    0.602460] pci 0000:0c:00.0: enabling Extended Tags
[    0.602576] pci 0000:0c:00.0: supports D1 D2
[    0.602812] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.602836] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.602979] acpiphp: Slot [1] registered
[    0.602990] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.603208] pci 0000:09:00.0: [14e4:1713] type 00 class 0x020000 PCIe Endpoint
[    0.603300] pci 0000:09:00.0: BAR 0 [mem 0xfe5f0000-0xfe5fffff 64bit]
[    0.603506] pci 0000:09:00.0: enabling Extended Tags
[    0.603825] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.604330] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.604380] pci_bus 0000:03: extended config space not accessible
[    0.604468] pci 0000:03:01.0: [1180:0832] type 00 class 0x0c0010 conventional PCI endpoint
[    0.604496] pci 0000:03:01.0: BAR 0 [mem 0xfe4ff800-0xfe4fffff]
[    0.604616] pci 0000:03:01.0: supports D1 D2
[    0.604619] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.604780] pci 0000:03:01.1: [1180:0822] type 00 class 0x080501 conventional PCI endpoint
[    0.604809] pci 0000:03:01.1: BAR 0 [mem 0xfe4ff500-0xfe4ff5ff]
[    0.604929] pci 0000:03:01.1: supports D1 D2
[    0.604933] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.605043] pci 0000:03:01.2: [1180:0592] type 00 class 0x088000 conventional PCI endpoint
[    0.605070] pci 0000:03:01.2: BAR 0 [mem 0xfe4ff600-0xfe4ff6ff]
[    0.605192] pci 0000:03:01.2: supports D1 D2
[    0.605195] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.605302] pci 0000:03:01.3: [1180:0852] type 00 class 0x088000 conventional PCI endpoint
[    0.605329] pci 0000:03:01.3: BAR 0 [mem 0xfe4ff700-0xfe4ff7ff]
[    0.605453] pci 0000:03:01.3: supports D1 D2
[    0.605456] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.605618] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.605636] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.605641] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.605645] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.605649] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.605653] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xf7ffffff window] (subtractive decode)
[    0.605656] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[    0.605660] pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[    0.605663] pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode)
[    0.605667] pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode)
[    0.605670] pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode)
[    0.605674] pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode)
[    0.605678] pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode)
[    0.606596] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.606770] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.606940] ACPI: PCI: Interrupt link LNKC configured for IRQ 4
[    0.607111] ACPI: PCI: Interrupt link LNKD configured for IRQ 5
[    0.607281] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.607451] ACPI: PCI: Interrupt link LNKF configured for IRQ 9
[    0.607632] ACPI: PCI: Interrupt link LNKG configured for IRQ 7
[    0.607779] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.607783] ACPI: PCI: Interrupt link LNKH disabled
[    0.608604] iommu: Default domain type: Translated
[    0.608604] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.608604] SCSI subsystem initialized
[    0.608604] libata version 3.00 loaded.
[    0.608604] ACPI: bus type USB registered
[    0.608604] usbcore: registered new interface driver usbfs
[    0.608604] usbcore: registered new interface driver hub
[    0.608604] usbcore: registered new device driver usb
[    0.608604] EDAC MC: Ver: 3.0.0
[    0.608604] NetLabel: Initializing
[    0.608604] NetLabel:  domain hash size = 128
[    0.608604] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.608604] NetLabel:  unlabeled traffic allowed by default
[    0.608604] mctp: management component transport protocol core
[    0.608604] NET: Registered PF_MCTP protocol family
[    0.608604] PCI: Using ACPI for IRQ routing
[    0.613302] PCI: pci_cache_line_size set to 64 bytes
[    0.613421] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.613425] e820: reserve RAM buffer [mem 0xbf66d800-0xbfffffff]
[    0.613468] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.613468] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.613468] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.613468] vgaarb: loaded
[    0.613468] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.613468] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.613468] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.614188] clocksource: Switched to clocksource tsc-early
[    0.616936] VFS: Disk quotas dquot_6.6.0
[    0.617014] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.617207] pnp: PnP ACPI init
[    0.617652] system 00:03: [io  0x0c80-0x0cff] could not be reserved
[    0.617843] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.618101] pnp 00:05: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618109] pnp 00:05: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618167] system 00:05: [io  0x0900-0x097f] has been reserved
[    0.618173] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.618232] pnp 00:06: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618239] pnp 00:06: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618244] pnp 00:06: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618249] pnp 00:06: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618298] system 00:06: [io  0xf400-0xf4fe] has been reserved
[    0.618303] system 00:06: [io  0x1080-0x10bf] has been reserved
[    0.618307] system 00:06: [io  0x10c0-0x10df] has been reserved
[    0.618311] system 00:06: [io  0x0809] has been reserved
[    0.638961] pnp 00:07: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.639052] system 00:07: [mem 0x00000000-0x0009efff] could not be reserved
[    0.639058] system 00:07: [mem 0x0009f000-0x0009ffff] could not be reserved
[    0.639063] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.639067] system 00:07: [mem 0x00100000-0xbf66d7ff] could not be reserved
[    0.639072] system 00:07: [mem 0xbf66d800-0xbf6fffff] has been reserved
[    0.639077] system 00:07: [mem 0xbf700000-0xbf7fffff] has been reserved
[    0.639081] system 00:07: [mem 0xbf700000-0xbfefffff] could not be reserved
[    0.639085] system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
[    0.639090] system 00:07: [mem 0xffa00000-0xffbfffff] has been reserved
[    0.639094] system 00:07: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.639098] system 00:07: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.639103] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.639107] system 00:07: [mem 0xfeda0000-0xfeda3fff] has been reserved
[    0.639112] system 00:07: [mem 0xfeda4000-0xfeda4fff] has been reserved
[    0.639116] system 00:07: [mem 0xfeda5000-0xfeda5fff] has been reserved
[    0.639121] system 00:07: [mem 0xfeda6000-0xfeda6fff] has been reserved
[    0.639125] system 00:07: [mem 0xfed18000-0xfed1bfff] has been reserved
[    0.639129] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.639251] pnp: PnP ACPI: found 8 devices
[    0.647591] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.648007] NET: Registered PF_INET protocol family
[    0.648288] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.679573] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.679655] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.679725] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.680050] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.680291] TCP: Hash tables configured (established 32768 bind 32768)
[    0.680636] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.680780] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.680837] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.681177] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.681212] NET: Registered PF_XDP protocol family
[    0.681243] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.681294] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[    0.681301] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[    0.681308] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 0c] add_size 1000
[    0.681313] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000
[    0.681321] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
[    0.681326] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[    0.681375] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]: assigned
[    0.681385] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]: assigned
[    0.681392] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]: assigned
[    0.681399] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]: assigned
[    0.681405] pci 0000:00:1c.0: bridge window [io  0x2000-0x2fff]: assigned
[    0.681410] pci 0000:00:1c.1: bridge window [io  0x3000-0x3fff]: assigned
[    0.681415] pci 0000:00:1c.5: bridge window [io  0x4000-0x4fff]: assigned
[    0.681426] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.681433] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.681442] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.681449] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.681459] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.681464] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.681472] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.681479] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.681489] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.681494] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.681502] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.681509] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.681519] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.681524] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.681532] pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.681538] pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.681550] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.681558] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.681573] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.681577] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.681580] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.681584] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.681588] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.681591] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.681595] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.681598] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.681602] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.681605] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff window]
[    0.681609] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff window]
[    0.681612] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff window]
[    0.681616] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.681620] pci_bus 0000:0b: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.681623] pci_bus 0000:0b: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.681627] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    0.681631] pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.681634] pci_bus 0000:0c: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.681638] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
[    0.681642] pci_bus 0000:0d: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.681645] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.681649] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.681652] pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.681656] pci_bus 0000:09: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.681660] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.681664] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.681667] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.681670] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.681674] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.681677] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.681681] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.681684] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.681688] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.681692] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.681695] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff window]
[    0.681699] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff window]
[    0.681703] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff window]
[    0.684958] PCI: CLS 64 bytes, default 64
[    0.685123] Trying to unpack rootfs image as initramfs...
[    0.686400] Initialise system trusted keyrings
[    0.686437] Key type blacklist registered
[    0.686618] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[    0.686651] zbud: loaded
[    0.687592] fuse: init (API version 7.40)
[    0.688100] integrity: Platform Keyring initialized
[    0.688133] integrity: Machine keyring initialized
[    0.720063] Key type asymmetric registered
[    0.720076] Asymmetric key parser 'x509' registered
[    0.720233] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.720443] io scheduler mq-deadline registered
[    0.720447] io scheduler kyber registered
[    0.720528] io scheduler bfq registered
[    0.722291] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.722530] Monitor-Mwait will be used to enter C-1 state
[    0.722556] Monitor-Mwait will be used to enter C-2 state
[    0.722570] Monitor-Mwait will be used to enter C-3 state
[    0.722580] ACPI: \_PR_.CPU0: Found 3 idle states
[    0.723173] ACPI: AC: AC Adapter [AC] (on-line)
[    0.723322] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.726061] ACPI: button: Lid Switch [LID]
[    0.726189] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.726287] ACPI: button: Power Button [PBTN]
[    0.726363] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.726416] ACPI: button: Sleep Button [SBTN]
[    0.735642] thermal LNXTHERM:00: registered as thermal_zone0
[    0.735658] ACPI: thermal: Thermal Zone [THM] (48 C)
[    0.736221] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.750348] Non-volatile memory driver v1.3
[    0.750359] Linux agpgart interface v0.103
[    0.750621] ACPI: bus type drm_connector registered
[    0.786145] ACPI: battery: Slot [BAT0] (battery present)
[    0.786326] ahci 0000:00:1f.2: version 3.0
[    0.786805] ahci 0000:00:1f.2: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
[    0.786814] ahci 0000:00:1f.2: 2/3 ports implemented (port mask 0x5)
[    0.786819] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    0.796898] scsi host0: ahci
[    0.797349] scsi host1: ahci
[    0.797620] scsi host2: ahci
[    0.797741] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 24 lpm-pol 3
[    0.797746] ata2: DUMMY
[    0.797749] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 24 lpm-pol 3
[    0.798620] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.798646] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.798661] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.798715] uhci_hcd 0000:00:1a.0: irq 20, io port 0x00006f20
[    0.798841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.798848] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.798852] usb usb1: Product: UHCI Host Controller
[    0.798855] usb usb1: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.798859] usb usb1: SerialNumber: 0000:00:1a.0
[    0.799137] hub 1-0:1.0: USB hub found
[    0.799155] hub 1-0:1.0: 2 ports detected
[    0.799764] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.799776] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    0.799789] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.799831] uhci_hcd 0000:00:1a.1: irq 21, io port 0x00006f00
[    0.800038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.800044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.800048] usb usb2: Product: UHCI Host Controller
[    0.800052] usb usb2: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.800055] usb usb2: SerialNumber: 0000:00:1a.1
[    0.800313] hub 2-0:1.0: USB hub found
[    0.800330] hub 2-0:1.0: 2 ports detected
[    0.800871] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.800884] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    0.800917] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.800947] uhci_hcd 0000:00:1d.0: irq 20, io port 0x00006f80
[    0.801090] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.801097] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.801100] usb usb3: Product: UHCI Host Controller
[    0.801104] usb usb3: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.801107] usb usb3: SerialNumber: 0000:00:1d.0
[    0.801353] hub 3-0:1.0: USB hub found
[    0.801371] hub 3-0:1.0: 2 ports detected
[    0.801933] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.801947] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    0.801958] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.801989] uhci_hcd 0000:00:1d.1: irq 21, io port 0x00006f60
[    0.802102] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.802108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.802112] usb usb4: Product: UHCI Host Controller
[    0.802115] usb usb4: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.802119] usb usb4: SerialNumber: 0000:00:1d.1
[    0.802372] hub 4-0:1.0: USB hub found
[    0.802390] hub 4-0:1.0: 2 ports detected
[    0.803089] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.803104] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 5
[    0.803125] ehci-pci 0000:00:1a.7: debug port 1
[    0.809375] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    0.822659] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.822816] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    0.822823] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.822827] usb usb5: Product: EHCI Host Controller
[    0.822831] usb usb5: Manufacturer: Linux 6.10.3-arch1-2 ehci_hcd
[    0.822834] usb usb5: SerialNumber: 0000:00:1a.7
[    0.823184] hub 5-0:1.0: USB hub found
[    0.823205] hub 5-0:1.0: 4 ports detected
[    0.849482] hub 1-0:1.0: USB hub found
[    0.849511] hub 1-0:1.0: 2 ports detected
[    0.871868] Freeing initrd memory: 14980K
[    0.872631] hub 2-0:1.0: USB hub found
[    0.872653] hub 2-0:1.0: 2 ports detected
[    0.875619] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.875642] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 6
[    0.875666] ehci-pci 0000:00:1d.7: debug port 1
[    0.879628] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    0.883451] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.883628] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    0.883637] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.883643] usb usb6: Product: EHCI Host Controller
[    0.883648] usb usb6: Manufacturer: Linux 6.10.3-arch1-2 ehci_hcd
[    0.883654] usb usb6: SerialNumber: 0000:00:1d.7
[    0.883964] hub 6-0:1.0: USB hub found
[    0.883980] hub 6-0:1.0: 6 ports detected
[    0.895596] hub 3-0:1.0: USB hub found
[    0.895620] hub 3-0:1.0: 2 ports detected
[    0.907125] hub 4-0:1.0: USB hub found
[    0.907149] hub 4-0:1.0: 2 ports detected
[    0.907386] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.907400] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.907414] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.907451] uhci_hcd 0000:00:1d.2: irq 22, io port 0x00006f40
[    0.907568] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.907574] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.907578] usb usb7: Product: UHCI Host Controller
[    0.907582] usb usb7: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.907585] usb usb7: SerialNumber: 0000:00:1d.2
[    0.907840] hub 7-0:1.0: USB hub found
[    0.907856] hub 7-0:1.0: 2 ports detected
[    0.908217] usbcore: registered new interface driver usbserial_generic
[    0.908230] usbserial: USB Serial support registered for generic
[    0.908502] rtc_cmos 00:02: RTC can wake from S4
[    0.908950] rtc_cmos 00:02: registered as rtc0
[    0.909000] rtc_cmos 00:02: setting system clock to 2024-08-17T17:43:43 UTC (1723916623)
[    0.909076] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.909235] intel_pstate: CPU model not supported
[    0.909273] ledtrig-cpu: registered to indicate activity on CPUs
[    0.910047] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.911879] fbcon: Deferring console take-over
[    0.911894] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.911994] hid: raw HID events driver (C) Jiri Kosina
[    0.912176] drop_monitor: Initializing network drop monitor service
[    0.912695] NET: Registered PF_INET6 protocol family
[    0.933789] Segment Routing with IPv6
[    0.933799] RPL Segment Routing with IPv6
[    0.933843] In-situ OAM (IOAM) with IPv6
[    0.933910] NET: Registered PF_PACKET protocol family
[    0.934297] microcode: Current revision: 0x000000a3
[    0.934432] IPI shorthand broadcast: enabled
[    0.940635] sched_clock: Marking stable (938469817, 1684985)->(944984506, -4829704)
[    0.940882] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.940967] registered taskstats version 1
[    0.941313] Loading compiled-in X.509 certificates
[    0.951407] Loaded X.509 cert 'Build time autogenerated kernel key: 634e326a06f4fa787244b126c789fbd74e2348e3'
[    0.963716] zswap: loaded using pool zstd/zsmalloc
[    0.963906] Demotion targets for Node 0: null
[    0.964812] Key type .fscrypt registered
[    0.964816] Key type fscrypt-provisioning registered
[    0.965820] PM:   Magic number: 4:777:744
[    0.974159] RAS: Correctable Errors collector initialized.
[    1.009329] clk: Disabling unused clocks
[    1.009341] PM: genpd: Disabling unused power domains
[    1.024424] ata3: SATA link down (SStatus 0 SControl 300)
[    1.026454] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.073291] ata1.00: ATA-8: WDC WD1200BEVS-75UST0, 01.01A01, max UDMA/133
[    1.073433] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 32), AA
[    1.074357] ata1.00: configured for UDMA/133
[    1.074792] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-7 1A01 PQ: 0 ANSI: 5
[    1.075559] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.075583] sd 0:0:0:0: [sda] Write Protect is off
[    1.075589] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.075621] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.075680] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    1.106270] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large:
[    1.106278] clocksource:                       'hpet' wd_nsec: 506428436 wd_now: e337b5 wd_last: 7492f8 mask: ffffffff
[    1.106286] clocksource:                       'tsc-early' cs_nsec: 376726894 cs_now: 3b19b356b cs_last: 39001bbd6 mask: ffffffffffffffff
[    1.106292] clocksource:                       Clocksource 'tsc-early' skewed -129701542 ns (-129 ms) over watchdog 'hpet' interval of 506428436 ns (506 ms)
[    1.106299] clocksource:                       'tsc-early' is current clocksource.
[    1.106309] tsc: Marking TSC unstable due to clocksource watchdog
[    1.106323] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[    1.106327] sched_clock: Marking unstable (1104638033, 1684985)<-(1111152721, -4829704)
[    1.106595] clocksource: Switched to clocksource hpet
[    1.118235]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    1.118801] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.122578] Freeing unused decrypted memory: 2028K
[    1.124756] Freeing unused kernel image (initmem) memory: 3432K
[    1.124756] Write protecting the kernel read-only data: 32768k
[    1.124756] Freeing unused kernel image (rodata/data gap) memory: 900K
[    1.124756] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.124756] rodata_test: all tests were successful
[    1.124756] x86/mm: Checking user space page tables
[    1.308378] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.308426] Run /init as init process
[    1.308430]   with arguments:
[    1.308433]     /init
[    1.308436]   with environment:
[    1.308438]     HOME=/
[    1.308440]     TERM=linux
[    1.308442]     BOOT_IMAGE=/boot/vmlinuz-linux
[    1.321790] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    1.511496] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[    1.511511] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.511515] usb 3-1: Product:  USB OPTICAL MOUSE
[    1.551543] usbcore: registered new interface driver usbhid
[    1.551553] usbhid: USB HID core driver
[    1.671158] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQBC data block query control method not found
[    1.786647] ata_piix 0000:00:1f.1: version 2.13
[    1.791269] scsi host3: ata_piix
[    1.792976] scsi host4: ata_piix
[    1.793096] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 lpm-pol 0
[    1.793101] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 lpm-pol 0
[    1.823278] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.830348] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.831234] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.931743] usb 6-2: new high-speed USB device number 3 using ehci-pci
[    1.972153] ata4.00: ATAPI: HL-DT-ST DVDRW  GSA-S10N, A100, max UDMA/33
[    2.001878] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRW  GSA-S10N  A100 PQ: 0 ANSI: 5
[    2.089488] usb 6-2: New USB device found, idVendor=0bda, idProduct=8189, bcdDevice= 2.00
[    2.089502] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.089507] usb 6-2: Product: RTL8187B_WLAN_Adapter
[    2.089511] usb 6-2: Manufacturer: Manufacturer_Realtek
[    2.089514] usb 6-2: SerialNumber: 00e04c000001
[    2.128874] sdhci: Secure Digital Host Controller Interface driver
[    2.128883] sdhci: Copyright(c) Pierre Ossman
[    2.153912] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.207386] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
[    2.207758] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    2.212367] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[    2.238430] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
[    2.261445] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[    2.261469] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.295287] firewire_ohci 0000:03:01.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.320788] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.332207] b43-pci-bridge 0000:0c:00.0: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
[    2.418404] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    2.607447] usb 7-1: New USB device found, idVendor=0483, idProduct=2016, bcdDevice= 0.01
[    2.607460] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.607465] usb 7-1: Product: Biometric Coprocessor
[    2.607469] usb 7-1: Manufacturer: STMicroelectronics
[    2.815611] firewire_core 0000:03:01.0: created device fw0: GUID 464fc00016568da1, S400
[    3.115111] usb 6-6: new high-speed USB device number 5 using ehci-pci
[    3.273511] usb 6-6: New USB device found, idVendor=05a9, idProduct=2640, bcdDevice= 1.00
[    3.273519] usb 6-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.273524] usb 6-6: Product: Laptop Integrated Webcam
[    3.273527] usb 6-6: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3
[    3.576586] pci 0000:00:00.0: Intel 965GM Chipset
[    3.576623] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    3.576973] pci 0000:00:00.0: detected 8192K stolen memory
[    3.632454] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.760738] i915 0000:00:02.0: [drm] Initialized overlay support.
[    3.761794] i915 0000:00:02.0: [drm] Skipping intel_backlight registration
[    3.761970] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1
[    3.762359] ACPI: video: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[    3.767641] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input5
[    3.767776] ACPI: video: [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    3.785074] acpi device:34: registered as cooling_device2
[    3.822167] fbcon: i915drmfb (fb0) is primary device
[    3.822176] fbcon: Deferring console take-over
[    3.822184] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    3.873241] fbcon: Taking over console
[    4.788661] Console: switching to colour frame buffer device 160x48
[    5.482132] EXT4-fs (sda2): mounted filesystem b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w with ordered data mode. Quota mode: none.
[    7.084719] systemd[1]: systemd 256.4-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[    7.084739] systemd[1]: Detected architecture x86-64.
[    7.376950] systemd[1]: Hostname set to <daidacorp>.
[    7.389000] random: crng init done
[    7.968978] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[    8.704098] (sd-exec-[234]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[    9.928989] systemd[1]: Queued start job for default target Graphical Interface.
[    9.972080] systemd[1]: Created slice Slice /system/dirmngr.
[    9.973176] systemd[1]: Created slice Slice /system/getty.
[    9.974105] systemd[1]: Created slice Slice /system/gpg-agent.
[    9.975067] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    9.976011] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    9.976937] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    9.977870] systemd[1]: Created slice Slice /system/keyboxd.
[    9.978897] systemd[1]: Created slice Slice /system/modprobe.
[    9.979835] systemd[1]: Created slice Slice /system/systemd-fsck.
[    9.980555] systemd[1]: Created slice User and Session Slice.
[    9.980752] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    9.980914] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.981373] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.981447] systemd[1]: Expecting device /dev/sda1...
[    9.981485] systemd[1]: Expecting device /dev/sda6...
[    9.981539] systemd[1]: Reached target Local Encrypted Volumes.
[    9.981596] systemd[1]: Reached target Login Prompts.
[    9.981653] systemd[1]: Reached target Local Integrity Protected Volumes.
[    9.981785] systemd[1]: Reached target Remote File Systems.
[    9.981841] systemd[1]: Reached target Slice Units.
[    9.981912] systemd[1]: Reached target Swaps.
[    9.981981] systemd[1]: Reached target Local Verity Protected Volumes.
[    9.982218] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    9.986713] systemd[1]: Listening on Process Core Dump Socket.
[    9.989204] systemd[1]: Listening on Credential Encryption/Decryption.
[    9.989479] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.989728] systemd[1]: Listening on Journal Sockets.
[    9.989803] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    9.989854] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    9.990093] systemd[1]: Listening on udev Control Socket.
[    9.990260] systemd[1]: Listening on udev Kernel Socket.
[    9.990454] systemd[1]: Listening on User Database Manager Socket.
[   10.013769] systemd[1]: Mounting Huge Pages File System...
[   10.015678] systemd[1]: Mounting POSIX Message Queue File System...
[   10.022069] systemd[1]: Mounting Kernel Debug File System...
[   10.024278] systemd[1]: Mounting Kernel Trace File System...
[   10.051003] systemd[1]: Mounting Temporary Directory /tmp...
[   10.051173] systemd[1]: Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/6.10.3-arch1-2/modules.devname).
[   10.055432] systemd[1]: Starting Load Kernel Module configfs...
[   10.065602] systemd[1]: Starting Load Kernel Module dm_mod...
[   10.071907] systemd[1]: Starting Load Kernel Module drm...
[   10.088757] systemd[1]: Starting Load Kernel Module fuse...
[   10.106533] systemd[1]: Starting Load Kernel Module loop...
[   10.106683] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[   10.106797] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[   10.114585] systemd[1]: Starting Journal Service...
[   10.138026] systemd[1]: Starting Load Kernel Modules...
[   10.138092] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.142099] systemd[1]: Starting Remount Root and Kernel File Systems...
[   10.152043] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[   10.152136] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.157862] systemd[1]: Starting Load udev Rules from Credentials...
[   10.163641] systemd[1]: Starting Coldplug All udev Devices...
[   10.201647] systemd[1]: Mounted Huge Pages File System.
[   10.202133] systemd[1]: Mounted POSIX Message Queue File System.
[   10.202426] systemd[1]: Mounted Kernel Debug File System.
[   10.202714] systemd[1]: Mounted Kernel Trace File System.
[   10.203003] systemd[1]: Mounted Temporary Directory /tmp.
[   10.203712] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   10.204423] systemd[1]: Finished Load Kernel Module configfs.
[   10.205513] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   10.206146] systemd[1]: Finished Load Kernel Module dm_mod.
[   10.208228] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   10.209654] systemd[1]: Finished Load Kernel Module drm.
[   10.210661] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   10.211224] systemd[1]: Finished Load Kernel Module fuse.
[   10.211998] EXT4-fs (sda2): re-mounted b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w. Quota mode: none.
[   10.212479] EXT4-fs (sda2): re-mounted b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w. Quota mode: none.
[   10.212606] systemd[1]: modprobe@loop.service: Deactivated successfully.
[   10.213218] systemd[1]: Finished Load Kernel Module loop.
[   10.216231] systemd[1]: Finished Remount Root and Kernel File Systems.
[   10.222613] systemd[1]: Mounting FUSE Control File System...
[   10.224520] systemd[1]: Mounting Kernel Configuration File System...
[   10.273601] systemd-journald[260]: Collecting audit messages is disabled.
[   10.342206] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
[   10.353523] systemd[1]: Starting Load/Save OS Random Seed...
[   10.353666] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[   10.353733] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.359575] systemd[1]: Finished Load Kernel Modules.
[   10.360420] systemd[1]: Finished Load udev Rules from Credentials.
[   10.360776] systemd[1]: Mounted FUSE Control File System.
[   10.361053] systemd[1]: Mounted Kernel Configuration File System.
[   10.382056] systemd[1]: Starting Apply Kernel Variables...
[   10.462270] systemd[1]: Started Journal Service.
[   10.721244] systemd-journald[260]: Received client request to flush runtime journal.
[   18.306950] EXT4-fs (sda1): mounted filesystem dde6e24e-f350-4f06-8f21-35215fa2af0d r/w with ordered data mode. Quota mode: none.
[   18.907655] EXT4-fs (sda6): mounted filesystem 50c8a8e2-b9f7-453f-8fe3-d44576578952 r/w with ordered data mode. Quota mode: none.
[  107.802037] usb 3-1: USB disconnect, device number 2
[  111.181926] usb 3-1: new low-speed USB device number 3 using uhci_hcd
[  111.373317] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[  111.373334] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  111.373341] usb 3-1: Product:  USB OPTICAL MOUSE
[  113.132160] usb 6-2: USB disconnect, device number 3
[  114.581919] usb 6-2: new high-speed USB device number 7 using ehci-pci
[  114.742923] usb 6-2: New USB device found, idVendor=0bda, idProduct=8189, bcdDevice= 2.00
[  114.742936] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  114.742942] usb 6-2: Product: RTL8187B_WLAN_Adapter
[  114.742948] usb 6-2: Manufacturer: Manufacturer_Realtek
[  114.742953] usb 6-2: SerialNumber: 00e04c000001

Last edited by daidahan (2024-08-28 11:54:17)

daidahan · 2024-08-17 18:22:49

sorry im confused now

daidahan · 2024-08-20 21:16:08

Hello, any news with the logs?

daidahan · 2024-08-24 18:00:22

hi . I have run pacman -Syu again. The error reappeared and I have a new dmesg. I publish it here.

[    0.000000] Linux version 6.10.3-arch1-2 (linux@archlinux) (gcc (GCC) 14.2.1 20240805, GNU ld (GNU Binutils) 2.43.0) #1 SMP PREEMPT_DYNAMIC Tue, 06 Aug 2024 07:21:19 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b27d818a-8bf0-4e8f-8389-b683a66eab5a rw loglevel=3 quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf66d7ff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf66d800-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Dell Inc. XPS M1330                       /0N6705, BIOS A11 06/19/2008
[    0.000000] DMI: Memory slots populated: 2/2
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1496.175 MHz processor
[    0.002381] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002388] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002402] last_pfn = 0xbf66d max_arch_pfn = 0x400000000
[    0.002426] total RAM covered: 3063M
[    0.002817] Found optimal setting for mtrr clean up
[    0.002819]  gran_size: 64K 	chunk_size: 16M 	num_reg: 4  	lose cover RAM: 0G
[    0.002830] MTRR map: 7 entries (5 fixed + 2 variable; max 21), built from 8 variable MTRRs
[    0.002834] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.025126] RAMDISK: [mem 0x362ad000-0x3714dfff]
[    0.025230] ACPI: Early table checksum verification disabled
[    0.025237] ACPI: RSDP 0x00000000000FBBF0 000024 (v02 DELL  )
[    0.025247] ACPI: XSDT 0x00000000BF66F200 00005C (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025260] ACPI: FACP 0x00000000BF66F09C 0000F4 (v04 DELL   M08      27D80613 ASL  00000061)
[    0.025274] ACPI: DSDT 0x00000000BF66F800 005733 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.025282] ACPI: FACS 0x00000000BF67E000 000040
[    0.025289] ACPI: FACS 0x00000000BF67E000 000040
[    0.025296] ACPI: HPET 0x00000000BF66F300 000038 (v01 DELL   M08      00000001 ASL  00000061)
[    0.025305] ACPI: APIC 0x00000000BF66F400 000068 (v01 DELL   M08      27D80613 ASL  00000047)
[    0.025313] ACPI: MCFG 0x00000000BF66F3C0 00003E (v16 DELL   M08      27D80613 ASL  00000061)
[    0.025322] ACPI: SLIC 0x00000000BF66F49C 000176 (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025330] ACPI: BOOT 0x00000000BF66EFC0 000028 (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025338] ACPI: SSDT 0x00000000BF66DA82 0004CC (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.025345] ACPI: Reserving FACP table memory at [mem 0xbf66f09c-0xbf66f18f]
[    0.025348] ACPI: Reserving DSDT table memory at [mem 0xbf66f800-0xbf674f32]
[    0.025351] ACPI: Reserving FACS table memory at [mem 0xbf67e000-0xbf67e03f]
[    0.025353] ACPI: Reserving FACS table memory at [mem 0xbf67e000-0xbf67e03f]
[    0.025356] ACPI: Reserving HPET table memory at [mem 0xbf66f300-0xbf66f337]
[    0.025358] ACPI: Reserving APIC table memory at [mem 0xbf66f400-0xbf66f467]
[    0.025361] ACPI: Reserving MCFG table memory at [mem 0xbf66f3c0-0xbf66f3fd]
[    0.025363] ACPI: Reserving SLIC table memory at [mem 0xbf66f49c-0xbf66f611]
[    0.025365] ACPI: Reserving BOOT table memory at [mem 0xbf66efc0-0xbf66efe7]
[    0.025368] ACPI: Reserving SSDT table memory at [mem 0xbf66da82-0xbf66df4d]
[    0.025488] No NUMA configuration found
[    0.025490] Faking a node at [mem 0x0000000000000000-0x00000000bf66cfff]
[    0.025496] NODE_DATA(0) allocated [mem 0xbf668000-0xbf66cfff]
[    0.025555] Zone ranges:
[    0.025556]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.025561]   DMA32    [mem 0x0000000001000000-0x00000000bf66cfff]
[    0.025565]   Normal   empty
[    0.025568]   Device   empty
[    0.025570] Movable zone start for each node
[    0.025572] Early memory node ranges
[    0.025574]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.025577]   node   0: [mem 0x0000000000100000-0x00000000bf66cfff]
[    0.025582] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf66cfff]
[    0.025593] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.025684] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.070524] On node 0, zone DMA32: 2451 pages in unavailable ranges
[    0.070543] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
[    0.070883] ACPI: PM-Timer IO Port: 0x1008
[    0.070907] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.070911] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.070932] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.070939] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.070944] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.070954] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.070957] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.070982] CPU topo: Max. logical packages:   1
[    0.070985] CPU topo: Max. logical dies:       1
[    0.070986] CPU topo: Max. dies per package:   1
[    0.070999] CPU topo: Max. threads per core:   1
[    0.071001] CPU topo: Num. cores per package:     2
[    0.071003] CPU topo: Num. threads per package:   2
[    0.071004] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[    0.071031] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.071036] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.071039] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.071043] [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.071047] Booting paravirtualized kernel on bare hardware
[    0.071053] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.089339] setup_percpu: NR_CPUS:320 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.090559] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u1048576
[    0.090577] pcpu-alloc: s233472 r8192 d28672 u1048576 alloc=1*2097152
[    0.090585] pcpu-alloc: [0] 0 1 
[    0.090629] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b27d818a-8bf0-4e8f-8389-b683a66eab5a rw loglevel=3 quiet
[    0.090802] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[    0.094428] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.096300] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.096431] Fallback order for Node 0: 0 
[    0.096447] Built 1 zonelists, mobility grouping on.  Total pages: 783883
[    0.096452] Policy zone: DMA32
[    0.098499] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.150663] Memory: 3014248K/3135532K available (18432K kernel code, 2177K rwdata, 13436K rodata, 3432K init, 3492K bss, 121024K reserved, 0K cma-reserved)
[    0.167485] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.167765] Kernel/User page tables isolation: enabled
[    0.167971] ftrace: allocating 50274 entries in 197 pages
[    0.186082] ftrace: allocated 197 pages with 4 groups
[    0.186451] Dynamic Preempt: full
[    0.186710] rcu: Preemptible hierarchical RCU implementation.
[    0.186713] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
[    0.186715] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.186719] 	Trampoline variant of Tasks RCU enabled.
[    0.186720] 	Rude variant of Tasks RCU enabled.
[    0.186722] 	Tracing variant of Tasks RCU enabled.
[    0.186724] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.186726] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.186740] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.186744] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.186747] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.199383] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
[    0.199709] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.199946] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.200118] Console: colour dummy device 80x25
[    0.200124] printk: legacy console [tty0] enabled
[    0.200969] ACPI: Core revision 20240322
[    0.201407] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.201434] APIC: Switch to symmetric I/O mode setup
[    0.201953] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.218101] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1591054d430, max_idle_ns: 440795245896 ns
[    0.218112] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.03 BogoMIPS (lpj=4987250)
[    0.218149] CPU0: Thermal monitoring enabled (TM2)
[    0.218193] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.218197] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.218205] process: using mwait in idle threads
[    0.218210] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.218215] Spectre V2 : Mitigation: Retpolines
[    0.218217] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.218220] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.218222] Speculative Store Bypass: Vulnerable
[    0.218226] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.218228] MMIO Stale Data: Unknown: No mitigations
[    0.218234] x86/fpu: x87 FPU will use FXSAVE
[    0.260838] Freeing SMP alternatives memory: 40K
[    0.260853] pid_max: default: 32768 minimum: 301
[    0.262357] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[    0.264160] landlock: Up and running.
[    0.264164] Yama: becoming mindful.
[    0.264179] LSM support for eBPF active
[    0.264555] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.264587] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.374574] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz (family: 0x6, model: 0xf, stepping: 0xd)
[    0.374774] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.374774] core: PEBS disabled due to CPU errata
[    0.374774] ... version:                2
[    0.374774] ... bit width:              40
[    0.374774] ... generic registers:      2
[    0.374774] ... value mask:             000000ffffffffff
[    0.374774] ... max period:             000000007fffffff
[    0.374774] ... fixed-purpose events:   3
[    0.374774] ... event mask:             0000000700000003
[    0.374774] signal: max sigframe size: 1440
[    0.374774] rcu: Hierarchical SRCU implementation.
[    0.374774] rcu: 	Max phase no-delay instances is 1000.
[    0.374774] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.374774] smp: Bringing up secondary CPUs ...
[    0.374774] smpboot: x86: Booting SMP configuration:
[    0.374774] .... node  #0, CPUs:      #1
[    0.374919] smp: Brought up 1 node, 2 CPUs
[    0.374919] smpboot: Total of 2 processors activated (5987.06 BogoMIPS)
[    0.378862] devtmpfs: initialized
[    0.378862] x86/mm: Memory block size: 128MB
[    0.379599] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.379618] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.381961] pinctrl core: initialized pinctrl subsystem
[    0.382266] PM: RTC time: 23:39:54, date: 2024-08-23
[    0.384682] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.385388] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.385682] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.385935] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.385977] audit: initializing netlink subsys (disabled)
[    0.386025] audit: type=2000 audit(1724456394.183:1): state=initialized audit_enabled=0 res=1
[    0.386025] thermal_sys: Registered thermal governor 'fair_share'
[    0.386025] thermal_sys: Registered thermal governor 'bang_bang'
[    0.386025] thermal_sys: Registered thermal governor 'step_wise'
[    0.386025] thermal_sys: Registered thermal governor 'user_space'
[    0.386025] thermal_sys: Registered thermal governor 'power_allocator'
[    0.386025] cpuidle: using governor ladder
[    0.386025] cpuidle: using governor menu
[    0.386025] Simple Boot Flag at 0x79 set to 0x1
[    0.386025] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.386025] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[    0.386025] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry
[    0.386025] PCI: Using configuration type 1 for base access
[    0.386025] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.398181] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.398187] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.400258] Demotion targets for Node 0: null
[    0.406999] ACPI: Added _OSI(Module Device)
[    0.407004] ACPI: Added _OSI(Processor Device)
[    0.407007] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.407010] ACPI: Added _OSI(Processor Aggregator Device)
[    0.414804] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.430735] ACPI: Dynamic OEM Table Load:
[    0.430750] ACPI: SSDT 0xFFFFA07C01B49A20 000043 (v01 LMPWR  DELLLOM  00001001 INTL 20050624)
[    0.431839] ACPI: Dynamic OEM Table Load:
[    0.431850] ACPI: SSDT 0xFFFFA07C012EA000 0001C0 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.432777] ACPI: Dynamic OEM Table Load:
[    0.432788] ACPI: SSDT 0xFFFFA07C019AE800 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.433956] ACPI: Dynamic OEM Table Load:
[    0.433966] ACPI: SSDT 0xFFFFA07C01B36200 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[    0.434665] ACPI: Dynamic OEM Table Load:
[    0.434675] ACPI: SSDT 0xFFFFA07C01B67C00 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[    0.435546] ACPI: _OSC evaluated successfully for all CPUs
[    0.435808] ACPI: Interpreter enabled
[    0.435838] ACPI: PM: (supports S0 S3 S4 S5)
[    0.435842] ACPI: Using IOAPIC for interrupt routing
[    0.436694] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.436698] PCI: Using E820 reservations for host bridge windows
[    0.437060] ACPI: Enabled 13 GPEs in block 00 to 1F
[    0.577196] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.577216] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.577239] acpi PNP0A03:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.595308] PCI host bridge to bus 0000:00
[    0.595314] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.595320] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.595324] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.595328] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.595332] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff window]
[    0.595335] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[    0.595339] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[    0.595342] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window]
[    0.595346] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window]
[    0.595349] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window]
[    0.595360] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window]
[    0.595364] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window]
[    0.595368] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.595407] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 conventional PCI endpoint
[    0.595568] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 conventional PCI endpoint
[    0.595587] pci 0000:00:02.0: BAR 0 [mem 0xfea00000-0xfeafffff 64bit]
[    0.595600] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.595609] pci 0000:00:02.0: BAR 4 [io  0xeff8-0xefff]
[    0.595635] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.595830] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 conventional PCI endpoint
[    0.595847] pci 0000:00:02.1: BAR 0 [mem 0xfeb00000-0xfebfffff 64bit]
[    0.596095] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 conventional PCI endpoint
[    0.596166] pci 0000:00:1a.0: BAR 4 [io  0x6f20-0x6f3f]
[    0.596381] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 conventional PCI endpoint
[    0.596452] pci 0000:00:1a.1: BAR 4 [io  0x6f00-0x6f1f]
[    0.596691] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.596718] pci 0000:00:1a.7: BAR 0 [mem 0xfed1c400-0xfed1c7ff]
[    0.596841] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.597046] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[    0.597081] pci 0000:00:1b.0: BAR 0 [mem 0xfe9fc000-0xfe9fffff 64bit]
[    0.597224] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.597451] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 PCIe Root Port
[    0.597502] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.597628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.597868] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 PCIe Root Port
[    0.597918] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.597931] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.598048] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.598289] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400 PCIe Root Port
[    0.598340] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.598349] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.598356] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.598374] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.598477] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.598940] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400 PCIe Root Port
[    0.598991] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.599004] pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.599121] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.599344] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 conventional PCI endpoint
[    0.599415] pci 0000:00:1d.0: BAR 4 [io  0x6f80-0x6f9f]
[    0.599630] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 conventional PCI endpoint
[    0.599702] pci 0000:00:1d.1: BAR 4 [io  0x6f60-0x6f7f]
[    0.599902] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 conventional PCI endpoint
[    0.599973] pci 0000:00:1d.2: BAR 4 [io  0x6f40-0x6f5f]
[    0.600190] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 conventional PCI endpoint
[    0.600217] pci 0000:00:1d.7: BAR 0 [mem 0xfed1c000-0xfed1c3ff]
[    0.600340] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.600533] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 conventional PCI bridge
[    0.600582] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.600595] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.600841] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 conventional PCI endpoint
[    0.600974] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.600983] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.600989] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.600999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.601220] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a conventional PCI endpoint
[    0.601247] pci 0000:00:1f.1: BAR 0 [io  0x01f0-0x01f7]
[    0.601262] pci 0000:00:1f.1: BAR 1 [io  0x03f4-0x03f7]
[    0.601277] pci 0000:00:1f.1: BAR 2 [io  0x0170-0x0177]
[    0.601291] pci 0000:00:1f.1: BAR 3 [io  0x0374-0x0377]
[    0.601305] pci 0000:00:1f.1: BAR 4 [io  0x6fa0-0x6faf]
[    0.601336] pci 0000:00:1f.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    0.601340] pci 0000:00:1f.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    0.601343] pci 0000:00:1f.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    0.601346] pci 0000:00:1f.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    0.601544] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 conventional PCI endpoint
[    0.601571] pci 0000:00:1f.2: BAR 0 [io  0x6eb0-0x6eb7]
[    0.601586] pci 0000:00:1f.2: BAR 1 [io  0x6eb8-0x6ebb]
[    0.601601] pci 0000:00:1f.2: BAR 2 [io  0x6ec0-0x6ec7]
[    0.601615] pci 0000:00:1f.2: BAR 3 [io  0x6ec8-0x6ecb]
[    0.601629] pci 0000:00:1f.2: BAR 4 [io  0x6ee0-0x6eff]
[    0.601644] pci 0000:00:1f.2: BAR 5 [mem 0xfe9fb800-0xfe9fbfff]
[    0.601719] pci 0000:00:1f.2: PME# supported from D3hot
[    0.601899] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 conventional PCI endpoint
[    0.601927] pci 0000:00:1f.3: BAR 0 [mem 0xfe9fb700-0xfe9fb7ff]
[    0.601975] pci 0000:00:1f.3: BAR 4 [io  0x10c0-0x10df]
[    0.602213] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.602356] pci 0000:0c:00.0: [14e4:4311] type 00 class 0x028000 PCIe Legacy Endpoint
[    0.602392] pci 0000:0c:00.0: BAR 0 [mem 0xfe8fc000-0xfe8fffff]
[    0.602504] pci 0000:0c:00.0: enabling Extended Tags
[    0.602620] pci 0000:0c:00.0: supports D1 D2
[    0.602856] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.602880] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.603024] acpiphp: Slot [1] registered
[    0.603034] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.603256] pci 0000:09:00.0: [14e4:1713] type 00 class 0x020000 PCIe Endpoint
[    0.603347] pci 0000:09:00.0: BAR 0 [mem 0xfe5f0000-0xfe5fffff 64bit]
[    0.603553] pci 0000:09:00.0: enabling Extended Tags
[    0.603872] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.604373] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.604422] pci_bus 0000:03: extended config space not accessible
[    0.604515] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via FireWire function)
[    0.604519] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[    0.604523] pci 0000:03:01.0: [1180:0832] type 00 class 0x0c0010 conventional PCI endpoint
[    0.604550] pci 0000:03:01.0: BAR 0 [mem 0xfe4ff800-0xfe4fffff]
[    0.604671] pci 0000:03:01.0: supports D1 D2
[    0.604674] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.604843] pci 0000:03:01.1: [1180:0822] type 00 class 0x080501 conventional PCI endpoint
[    0.604871] pci 0000:03:01.1: BAR 0 [mem 0xfe4ff400-0xfe4ff4ff]
[    0.604992] pci 0000:03:01.1: supports D1 D2
[    0.604996] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.605105] pci 0000:03:01.2: [1180:0592] type 00 class 0x088000 conventional PCI endpoint
[    0.605133] pci 0000:03:01.2: BAR 0 [mem 0xfe4ff600-0xfe4ff6ff]
[    0.605254] pci 0000:03:01.2: supports D1 D2
[    0.605257] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.605363] pci 0000:03:01.3: [1180:0852] type 00 class 0x088000 conventional PCI endpoint
[    0.605391] pci 0000:03:01.3: BAR 0 [mem 0xfe4ff700-0xfe4ff7ff]
[    0.605511] pci 0000:03:01.3: supports D1 D2
[    0.605515] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.605677] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.605696] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.605700] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.605704] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.605708] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.605712] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xf7ffffff window] (subtractive decode)
[    0.605715] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[    0.605719] pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[    0.605723] pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode)
[    0.605726] pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode)
[    0.605730] pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode)
[    0.605733] pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode)
[    0.605737] pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode)
[    0.606656] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.606830] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.607001] ACPI: PCI: Interrupt link LNKC configured for IRQ 4
[    0.607172] ACPI: PCI: Interrupt link LNKD configured for IRQ 5
[    0.607342] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.607513] ACPI: PCI: Interrupt link LNKF configured for IRQ 9
[    0.607683] ACPI: PCI: Interrupt link LNKG configured for IRQ 7
[    0.607831] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.607835] ACPI: PCI: Interrupt link LNKH disabled
[    0.608664] iommu: Default domain type: Translated
[    0.608664] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.608664] SCSI subsystem initialized
[    0.608664] libata version 3.00 loaded.
[    0.608664] ACPI: bus type USB registered
[    0.608664] usbcore: registered new interface driver usbfs
[    0.608664] usbcore: registered new interface driver hub
[    0.608664] usbcore: registered new device driver usb
[    0.608664] EDAC MC: Ver: 3.0.0
[    0.608664] NetLabel: Initializing
[    0.608664] NetLabel:  domain hash size = 128
[    0.608664] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.608697] NetLabel:  unlabeled traffic allowed by default
[    0.608708] mctp: management component transport protocol core
[    0.608711] NET: Registered PF_MCTP protocol family
[    0.608721] PCI: Using ACPI for IRQ routing
[    0.613363] PCI: pci_cache_line_size set to 64 bytes
[    0.613482] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.613486] e820: reserve RAM buffer [mem 0xbf66d800-0xbfffffff]
[    0.613528] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.613528] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.613528] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.613528] vgaarb: loaded
[    0.613528] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.613528] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.613528] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.614780] clocksource: Switched to clocksource tsc-early
[    0.617514] VFS: Disk quotas dquot_6.6.0
[    0.617592] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.617787] pnp: PnP ACPI init
[    0.618234] system 00:03: [io  0x0c80-0x0cff] could not be reserved
[    0.618409] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.618667] pnp 00:05: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618675] pnp 00:05: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618733] system 00:05: [io  0x0900-0x097f] has been reserved
[    0.618739] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.618813] pnp 00:06: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618820] pnp 00:06: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618825] pnp 00:06: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618829] pnp 00:06: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.618879] system 00:06: [io  0xf400-0xf4fe] has been reserved
[    0.618885] system 00:06: [io  0x1080-0x10bf] has been reserved
[    0.618889] system 00:06: [io  0x10c0-0x10df] has been reserved
[    0.618893] system 00:06: [io  0x0809] has been reserved
[    0.639626] pnp 00:07: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.639718] system 00:07: [mem 0x00000000-0x0009efff] could not be reserved
[    0.639724] system 00:07: [mem 0x0009f000-0x0009ffff] could not be reserved
[    0.639729] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.639733] system 00:07: [mem 0x00100000-0xbf66d7ff] could not be reserved
[    0.639738] system 00:07: [mem 0xbf66d800-0xbf6fffff] has been reserved
[    0.639742] system 00:07: [mem 0xbf700000-0xbf7fffff] has been reserved
[    0.639746] system 00:07: [mem 0xbf700000-0xbfefffff] could not be reserved
[    0.639751] system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
[    0.639756] system 00:07: [mem 0xffa00000-0xffbfffff] has been reserved
[    0.639760] system 00:07: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.639764] system 00:07: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.639768] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.639773] system 00:07: [mem 0xfeda0000-0xfeda3fff] has been reserved
[    0.639777] system 00:07: [mem 0xfeda4000-0xfeda4fff] has been reserved
[    0.639782] system 00:07: [mem 0xfeda5000-0xfeda5fff] has been reserved
[    0.639786] system 00:07: [mem 0xfeda6000-0xfeda6fff] has been reserved
[    0.639790] system 00:07: [mem 0xfed18000-0xfed1bfff] has been reserved
[    0.639795] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.639917] pnp: PnP ACPI: found 8 devices
[    0.648269] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.648678] NET: Registered PF_INET protocol family
[    0.648968] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.680250] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.680333] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.680403] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.680727] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.680969] TCP: Hash tables configured (established 32768 bind 32768)
[    0.681311] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.681458] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.681515] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.681719] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.681742] NET: Registered PF_XDP protocol family
[    0.681761] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.681773] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[    0.681779] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[    0.681786] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 0c] add_size 1000
[    0.681791] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000
[    0.681800] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
[    0.681804] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[    0.681852] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]: assigned
[    0.681861] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]: assigned
[    0.681868] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]: assigned
[    0.681875] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]: assigned
[    0.681881] pci 0000:00:1c.0: bridge window [io  0x2000-0x2fff]: assigned
[    0.681886] pci 0000:00:1c.1: bridge window [io  0x3000-0x3fff]: assigned
[    0.681891] pci 0000:00:1c.5: bridge window [io  0x4000-0x4fff]: assigned
[    0.681901] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.681908] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.681917] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.681924] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.681934] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.681939] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.681947] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.681954] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.681965] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.681969] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.681977] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.681984] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.681995] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.681999] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.682007] pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.682014] pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.682026] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.682034] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.682048] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.682052] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.682056] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.682059] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.682063] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.682066] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.682070] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.682074] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.682077] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.682081] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff window]
[    0.682084] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff window]
[    0.682088] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff window]
[    0.682092] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.682095] pci_bus 0000:0b: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.682099] pci_bus 0000:0b: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.682103] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    0.682230] pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.682236] pci_bus 0000:0c: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.682241] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
[    0.682244] pci_bus 0000:0d: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.682248] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.682252] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.682256] pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.682260] pci_bus 0000:09: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.682265] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.682269] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.682273] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.682276] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.682281] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.682285] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.682289] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.682292] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.682296] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.682301] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.682305] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff window]
[    0.682309] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff window]
[    0.682313] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff window]
[    0.685612] PCI: CLS 64 bytes, default 64
[    0.685775] Trying to unpack rootfs image as initramfs...
[    0.687051] Initialise system trusted keyrings
[    0.687097] Key type blacklist registered
[    0.687273] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[    0.687309] zbud: loaded
[    0.688248] fuse: init (API version 7.40)
[    0.688725] integrity: Platform Keyring initialized
[    0.688742] integrity: Machine keyring initialized
[    0.721878] Key type asymmetric registered
[    0.721895] Asymmetric key parser 'x509' registered
[    0.722038] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.722240] io scheduler mq-deadline registered
[    0.722245] io scheduler kyber registered
[    0.722329] io scheduler bfq registered
[    0.724074] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.724309] Monitor-Mwait will be used to enter C-1 state
[    0.724333] Monitor-Mwait will be used to enter C-2 state
[    0.724347] Monitor-Mwait will be used to enter C-3 state
[    0.724357] ACPI: \_PR_.CPU0: Found 3 idle states
[    0.724956] ACPI: AC: AC Adapter [AC] (on-line)
[    0.725116] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.727853] ACPI: button: Lid Switch [LID]
[    0.727971] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.728068] ACPI: button: Power Button [PBTN]
[    0.728145] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.728197] ACPI: button: Sleep Button [SBTN]
[    0.737366] thermal LNXTHERM:00: registered as thermal_zone0
[    0.737380] ACPI: thermal: Thermal Zone [THM] (60 C)
[    0.737942] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.755011] Non-volatile memory driver v1.3
[    0.755022] Linux agpgart interface v0.103
[    0.755134] ACPI: bus type drm_connector registered
[    0.756066] ahci 0000:00:1f.2: version 3.0
[    0.756788] ahci 0000:00:1f.2: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
[    0.756798] ahci 0000:00:1f.2: 2/3 ports implemented (port mask 0x5)
[    0.756802] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    0.771327] scsi host0: ahci
[    0.777898] scsi host1: ahci
[    0.784655] scsi host2: ahci
[    0.785135] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 24 lpm-pol 3
[    0.785141] ata2: DUMMY
[    0.785145] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 24 lpm-pol 3
[    0.785720] ACPI: battery: Slot [BAT0] (battery present)
[    0.786416] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.786441] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.786455] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.786513] uhci_hcd 0000:00:1a.0: irq 20, io port 0x00006f20
[    0.786672] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.786679] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.786683] usb usb1: Product: UHCI Host Controller
[    0.786686] usb usb1: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.786690] usb usb1: SerialNumber: 0000:00:1a.0
[    0.787203] hub 1-0:1.0: USB hub found
[    0.787232] hub 1-0:1.0: 2 ports detected
[    0.787858] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.787879] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.787900] ehci-pci 0000:00:1d.7: debug port 1
[    0.794485] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    0.807783] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.807971] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    0.807977] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.807982] usb usb2: Product: EHCI Host Controller
[    0.807986] usb usb2: Manufacturer: Linux 6.10.3-arch1-2 ehci_hcd
[    0.807989] usb usb2: SerialNumber: 0000:00:1d.7
[    0.808348] hub 2-0:1.0: USB hub found
[    0.808366] hub 2-0:1.0: 6 ports detected
[    0.834777] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.834804] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[    0.834831] ehci-pci 0000:00:1a.7: debug port 1
[    0.838802] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    0.851125] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.851311] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    0.851318] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.851322] usb usb3: Product: EHCI Host Controller
[    0.851325] usb usb3: Manufacturer: Linux 6.10.3-arch1-2 ehci_hcd
[    0.851329] usb usb3: SerialNumber: 0000:00:1a.7
[    0.851672] hub 3-0:1.0: USB hub found
[    0.851691] hub 3-0:1.0: 4 ports detected
[    0.867447] Freeing initrd memory: 14980K
[    0.877628] hub 1-0:1.0: USB hub found
[    0.877657] hub 1-0:1.0: 2 ports detected
[    0.877888] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.877929] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.877945] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.878019] uhci_hcd 0000:00:1a.1: irq 21, io port 0x00006f00
[    0.878171] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.878177] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.878182] usb usb4: Product: UHCI Host Controller
[    0.878185] usb usb4: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.878189] usb usb4: SerialNumber: 0000:00:1a.1
[    0.878486] hub 4-0:1.0: USB hub found
[    0.878502] hub 4-0:1.0: 2 ports detected
[    0.879070] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.879081] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.879092] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.879120] uhci_hcd 0000:00:1d.0: irq 20, io port 0x00006f80
[    0.879223] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.879229] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.879233] usb usb5: Product: UHCI Host Controller
[    0.879237] usb usb5: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.879240] usb usb5: SerialNumber: 0000:00:1d.0
[    0.879509] hub 5-0:1.0: USB hub found
[    0.879525] hub 5-0:1.0: 2 ports detected
[    0.879994] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.880005] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.880016] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.880042] uhci_hcd 0000:00:1d.1: irq 21, io port 0x00006f60
[    0.880144] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.880150] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.880154] usb usb6: Product: UHCI Host Controller
[    0.880157] usb usb6: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.880160] usb usb6: SerialNumber: 0000:00:1d.1
[    0.880407] hub 6-0:1.0: USB hub found
[    0.880423] hub 6-0:1.0: 2 ports detected
[    0.880929] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.880949] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.880961] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.880996] uhci_hcd 0000:00:1d.2: irq 22, io port 0x00006f40
[    0.881110] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.881116] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.881120] usb usb7: Product: UHCI Host Controller
[    0.881124] usb usb7: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.881127] usb usb7: SerialNumber: 0000:00:1d.2
[    0.881354] hub 7-0:1.0: USB hub found
[    0.881369] hub 7-0:1.0: 2 ports detected
[    0.881729] usbcore: registered new interface driver usbserial_generic
[    0.881743] usbserial: USB Serial support registered for generic
[    0.881998] rtc_cmos 00:02: RTC can wake from S4
[    0.882444] rtc_cmos 00:02: registered as rtc0
[    0.882493] rtc_cmos 00:02: setting system clock to 2024-08-23T23:39:54 UTC (1724456394)
[    0.882553] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.882712] intel_pstate: CPU model not supported
[    0.882751] ledtrig-cpu: registered to indicate activity on CPUs
[    0.883543] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.885447] fbcon: Deferring console take-over
[    0.885461] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.885556] hid: raw HID events driver (C) Jiri Kosina
[    0.885733] drop_monitor: Initializing network drop monitor service
[    0.886244] NET: Registered PF_INET6 protocol family
[    0.904070] Segment Routing with IPv6
[    0.904105] RPL Segment Routing with IPv6
[    0.904150] In-situ OAM (IOAM) with IPv6
[    0.904217] NET: Registered PF_PACKET protocol family
[    0.904661] microcode: Current revision: 0x000000a3
[    0.904813] IPI shorthand broadcast: enabled
[    0.910950] sched_clock: Marking stable (909053966, 1685418)->(915041295, -4301911)
[    0.911216] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.911289] registered taskstats version 1
[    0.911660] Loading compiled-in X.509 certificates
[    0.921648] Loaded X.509 cert 'Build time autogenerated kernel key: 634e326a06f4fa787244b126c789fbd74e2348e3'
[    0.934395] zswap: loaded using pool zstd/zsmalloc
[    0.934651] Demotion targets for Node 0: null
[    0.935505] Key type .fscrypt registered
[    0.935510] Key type fscrypt-provisioning registered
[    0.936506] PM:   Magic number: 4:316:707
[    0.944929] RAS: Correctable Errors collector initialized.
[    0.979926] clk: Disabling unused clocks
[    0.979937] PM: genpd: Disabling unused power domains
[    0.997639] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.000786] ata3: SATA link down (SStatus 0 SControl 300)
[    1.027877] ata1.00: ATA-8: WDC WD1200BEVS-75UST0, 01.01A01, max UDMA/133
[    1.028024] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 32), AA
[    1.028985] ata1.00: configured for UDMA/133
[    1.029370] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-7 1A01 PQ: 0 ANSI: 5
[    1.030137] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.030161] sd 0:0:0:0: [sda] Write Protect is off
[    1.030166] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.030198] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.030256] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    1.072819]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    1.073330] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.077075] Freeing unused decrypted memory: 2028K
[    1.080032] Freeing unused kernel image (initmem) memory: 3432K
[    1.080240] Write protecting the kernel read-only data: 32768k
[    1.081534] Freeing unused kernel image (rodata/data gap) memory: 900K
[    1.127435] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large:
[    1.127441] clocksource:                       'hpet' wd_nsec: 506277020 wd_now: e3589b wd_last: 74bc56 mask: ffffffff
[    1.127446] clocksource:                       'tsc-early' cs_nsec: 395979902 cs_now: 38af5fff7 cs_last: 367a5d9c1 mask: ffffffffffffffff
[    1.127450] clocksource:                       Clocksource 'tsc-early' skewed -110297118 ns (-110 ms) over watchdog 'hpet' interval of 506277020 ns (506 ms)
[    1.127455] clocksource:                       'tsc-early' is current clocksource.
[    1.127463] tsc: Marking TSC unstable due to clocksource watchdog
[    1.127474] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[    1.127477] sched_clock: Marking unstable (1125788415, 1685418)<-(1131775719, -4301911)
[    1.127725] clocksource: Switched to clocksource hpet
[    1.134102] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.134102] rodata_test: all tests were successful
[    1.134102] x86/mm: Checking user space page tables
[    1.245077] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[    1.262604] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.262616] Run /init as init process
[    1.262619]   with arguments:
[    1.262622]     /init
[    1.262624]   with environment:
[    1.262626]     HOME=/
[    1.262629]     TERM=linux
[    1.262631]     BOOT_IMAGE=/boot/vmlinuz-linux
[    1.432196] usb 5-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[    1.432210] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.432215] usb 5-1: Product:  USB OPTICAL MOUSE
[    1.486856] usbcore: registered new interface driver usbhid
[    1.486868] usbhid: USB HID core driver
[    1.682204] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQBC data block query control method not found
[    1.784505] ata_piix 0000:00:1f.1: version 2.13
[    1.784581] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.788090] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.797670] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.798334] scsi host3: ata_piix
[    1.798789] scsi host4: ata_piix
[    1.798936] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 lpm-pol 0
[    1.798942] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 lpm-pol 0
[    1.815091] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.843333] sdhci: Secure Digital Host Controller Interface driver
[    1.843342] sdhci: Copyright(c) Pierre Ossman
[    1.885189] firewire_ohci 0000:03:01.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    1.975462] ata4.00: ATAPI: HL-DT-ST DVDRW  GSA-S10N, A100, max UDMA/33
[    1.976541] usb 2-2: New USB device found, idVendor=0bda, idProduct=8189, bcdDevice= 2.00
[    1.976553] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.976560] usb 2-2: Product: RTL8187B_WLAN_Adapter
[    1.976566] usb 2-2: Manufacturer: Manufacturer_Realtek
[    1.976571] usb 2-2: SerialNumber: 00e04c000001
[    2.005191] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRW  GSA-S10N  A100 PQ: 0 ANSI: 5
[    2.128463] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.172322] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
[    2.172746] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    2.181019] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[    2.192140] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
[    2.231578] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[    2.231596] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.275197] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.278765] b43-pci-bridge 0000:0c:00.0: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
[    2.308395] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    2.388750] firewire_core 0000:03:01.0: created device fw0: GUID 464fc00016568da1, S400
[    2.511786] usb 7-1: New USB device found, idVendor=0483, idProduct=2016, bcdDevice= 0.01
[    2.511801] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.511806] usb 7-1: Product: Biometric Coprocessor
[    2.511810] usb 7-1: Manufacturer: STMicroelectronics
[    3.005209] usb 2-6: new high-speed USB device number 5 using ehci-pci
[    3.157106] usb 2-6: New USB device found, idVendor=05a9, idProduct=2640, bcdDevice= 1.00
[    3.157114] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.157118] usb 2-6: Product: Laptop Integrated Webcam
[    3.157122] usb 2-6: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3
[    3.538968] pci 0000:00:00.0: Intel 965GM Chipset
[    3.539005] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    3.539361] pci 0000:00:00.0: detected 8192K stolen memory
[    3.589120] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.722481] i915 0000:00:02.0: [drm] Initialized overlay support.
[    3.723502] i915 0000:00:02.0: [drm] Skipping intel_backlight registration
[    3.723667] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1
[    3.724078] ACPI: video: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[    3.729431] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input5
[    3.729581] ACPI: video: [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    3.747277] acpi device:34: registered as cooling_device2
[    3.783311] fbcon: i915drmfb (fb0) is primary device
[    3.783320] fbcon: Deferring console take-over
[    3.783328] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    3.836575] fbcon: Taking over console
[    4.794594] Console: switching to colour frame buffer device 160x48
[    7.321421] random: crng init done
[    7.974543] EXT4-fs (sda2): recovery complete
[    7.974645] EXT4-fs (sda2): mounted filesystem b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w with ordered data mode. Quota mode: none.
[   10.490718] systemd[1]: systemd 256.5-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[   10.490737] systemd[1]: Detected architecture x86-64.
[   10.524931] systemd[1]: Hostname set to <daidacorp>.
[   11.062289] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[   12.096742] (sd-exec-[234]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[   13.094781] systemd[1]: Queued start job for default target Graphical Interface.
[   13.202197] systemd[1]: Created slice Slice /system/dirmngr.
[   13.203281] systemd[1]: Created slice Slice /system/getty.
[   13.204204] systemd[1]: Created slice Slice /system/gpg-agent.
[   13.205162] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[   13.206102] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[   13.207029] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[   13.207950] systemd[1]: Created slice Slice /system/keyboxd.
[   13.208972] systemd[1]: Created slice Slice /system/modprobe.
[   13.209935] systemd[1]: Created slice Slice /system/systemd-fsck.
[   13.210644] systemd[1]: Created slice User and Session Slice.
[   13.210848] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   13.211009] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   13.211443] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   13.211515] systemd[1]: Expecting device /dev/sda1...
[   13.211551] systemd[1]: Expecting device /dev/sda6...
[   13.211600] systemd[1]: Reached target Local Encrypted Volumes.
[   13.211661] systemd[1]: Reached target Login Prompts.
[   13.211762] systemd[1]: Reached target Local Integrity Protected Volumes.
[   13.211845] systemd[1]: Reached target Remote File Systems.
[   13.211895] systemd[1]: Reached target Slice Units.
[   13.211961] systemd[1]: Reached target Swaps.
[   13.212027] systemd[1]: Reached target Local Verity Protected Volumes.
[   13.212363] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   13.216568] systemd[1]: Listening on Process Core Dump Socket.
[   13.218981] systemd[1]: Listening on Credential Encryption/Decryption.
[   13.219265] systemd[1]: Listening on Journal Socket (/dev/log).
[   13.219508] systemd[1]: Listening on Journal Sockets.
[   13.219582] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   13.219636] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   13.219868] systemd[1]: Listening on udev Control Socket.
[   13.220041] systemd[1]: Listening on udev Kernel Socket.
[   13.220232] systemd[1]: Listening on User Database Manager Socket.
[   13.241494] systemd[1]: Mounting Huge Pages File System...
[   13.243363] systemd[1]: Mounting POSIX Message Queue File System...
[   13.247699] systemd[1]: Mounting Kernel Debug File System...
[   13.252932] systemd[1]: Mounting Kernel Trace File System...
[   13.271448] systemd[1]: Mounting Temporary Directory /tmp...
[   13.278819] systemd[1]: Starting Create List of Static Device Nodes...
[   13.283382] systemd[1]: Starting Load Kernel Module configfs...
[   13.288805] systemd[1]: Starting Load Kernel Module dm_mod...
[   13.295544] systemd[1]: Starting Load Kernel Module drm...
[   13.299980] systemd[1]: Starting Load Kernel Module fuse...
[   13.336237] systemd[1]: Starting Load Kernel Module loop...
[   13.336385] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[   13.336499] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[   13.345493] systemd[1]: Starting Journal Service...
[   13.386269] systemd[1]: Starting Load Kernel Modules...
[   13.386337] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   13.392143] systemd[1]: Starting Remount Root and Kernel File Systems...
[   13.392282] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   13.394613] systemd[1]: Starting Load udev Rules from Credentials...
[   13.399147] systemd[1]: Starting Coldplug All udev Devices...
[   13.422045] systemd[1]: Mounted Huge Pages File System.
[   13.422585] systemd[1]: Mounted Kernel Debug File System.
[   13.422868] systemd[1]: Mounted Kernel Trace File System.
[   13.423144] systemd[1]: Mounted Temporary Directory /tmp.
[   13.429804] systemd[1]: Finished Create List of Static Device Nodes.
[   13.432676] systemd[1]: Mounted POSIX Message Queue File System.
[   13.433358] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   13.433963] systemd[1]: Finished Load Kernel Module configfs.
[   13.434748] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   13.435631] systemd[1]: Finished Load Kernel Module drm.
[   13.436411] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   13.436926] systemd[1]: Finished Load Kernel Module fuse.
[   13.439727] systemd[1]: Mounting FUSE Control File System...
[   13.445956] systemd[1]: Mounting Kernel Configuration File System...
[   13.448759] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[   13.482962] EXT4-fs (sda2): re-mounted b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w. Quota mode: none.
[   13.483147] EXT4-fs (sda2): re-mounted b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w. Quota mode: none.
[   13.485453] systemd[1]: Mounted FUSE Control File System.
[   13.486438] systemd[1]: Finished Remount Root and Kernel File Systems.
[   13.545888] loop: module loaded
[   13.626906] device-mapper: uevent: version 1.0.3
[   13.627166] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[   13.633199] systemd-journald[261]: Collecting audit messages is disabled.
[   13.723883] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[   13.728684] systemd[1]: Starting Load/Save OS Random Seed...
[   13.728754] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   13.729839] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   13.730461] systemd[1]: Finished Load Kernel Module dm_mod.
[   13.731292] systemd[1]: modprobe@loop.service: Deactivated successfully.
[   13.731853] systemd[1]: Finished Load Kernel Module loop.
[   13.733198] systemd[1]: Mounted Kernel Configuration File System.
[   13.733744] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[   13.803963] systemd[1]: Finished Load Kernel Modules.
[   13.808757] systemd[1]: Starting Apply Kernel Variables...
[   13.809005] systemd[1]: Started Journal Service.
[   13.936391] systemd-journald[261]: Received client request to flush runtime journal.
[   14.087010] systemd-journald[261]: File /var/log/journal/098cb73e8af94de88bdf3b43169957e7/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   16.574643] pps_core: LinuxPPS API ver. 1 registered
[   16.574653] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   16.588105] PTP clock support registered
[   16.717048] input: Quickstart Button 0 as /devices/platform/PNP0C32:00/input/input6
[   16.930210] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   16.939498] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   16.940081] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   17.040460] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:15D9:0A4C.0001/input/input7
[   17.040645] hid-generic 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[   17.102238] tg3 0000:09:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:15:c5:7d:7f:41
[   17.102254] tg3 0000:09:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
[   17.102260] tg3 0000:09:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[   17.102265] tg3 0000:09:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   17.133611] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[   17.151556] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   17.189930] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8
[   17.197961] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   17.202090] i2c i2c-9: Successfully instantiated SPD at 0x50
[   17.255377] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   17.264486] mc: Linux media interface: v0.10
[   17.418286] videodev: Linux video capture interface: v2.00
[   17.692153] mousedev: PS/2 mouse device common for all mice
[   17.698376] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   17.698395] cfg80211: failed to load regulatory.db
[   17.826827] iTCO_vendor_support: vendor-support=0
[   17.853195] r592: driver successfully loaded
[   17.939165] at24 9-0050: supply vcc not found, using dummy regulator
[   17.945044] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04753/0x200000/0x0/0x0, board id: 0, fw id: 356587
[   17.950553] at24 9-0050: 256 byte spd EEPROM, read-only
[   17.979673] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   17.993325] iTCO_wdt iTCO_wdt.1.auto: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[   17.993814] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[   18.002963] usb 2-6: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[   18.006348] gpio_ich gpio_ich.2.auto: GPIO from 528 to 577
[   18.009559] usbcore: registered new interface driver uvcvideo
[   18.107670] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9228: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   18.107687] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.107693] snd_hda_codec_idt hdaudioC0D0:    hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
[   18.107697] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   18.107701] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x21/0x0
[   18.107704] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   18.107708] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x13
[   18.107712] snd_hda_codec_idt hdaudioC0D0:      Mic=0xe
[   18.148219] b43-phy1: Broadcom 4311 WLAN found (core revision 10)
[   18.168602] input: HDA Intel Front Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   18.168860] input: HDA Intel Front Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   18.168980] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   18.181851] b43-phy1: Found PHY: Analog 4, Type 2 (G), Revision 8
[   18.181883] b43-phy1: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
[   18.195357] Broadcom 43xx driver loaded [ Features: PNLS ]
[   18.251342] tg3 0000:09:00.0 enp9s0: renamed from eth0
[   18.305673] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.306558] ieee80211 phy0: hwaddr 08:10:74:64:f7:df, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[   18.329014] rtl8187: Customer ID is 0x00
[   18.330757] rtl8187: wireless switch is on
[   18.330872] usbcore: registered new interface driver rtl8187
[   18.356071] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
[   18.356148] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
[   18.356225] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
[   18.356277] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
[   18.356284] b43-phy1 ERROR: Firmware file "b43/ucode5.fw" not found
[   18.356288] b43-phy1 ERROR: Firmware file "b43-open/ucode5.fw" not found
[   18.356291] b43-phy1 ERROR: You must go to [url]https://wireless.wiki.kernel.org/en/users/Drivers/b43#devicefirmware[/url] and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   18.365442] rtl8187 2-2:1.0 wlp0s29f7u2: renamed from wlan0
[   18.911823] intel_powerclamp: No package C-state available
[   20.008634] EXT4-fs (sda1): recovery complete
[   20.008735] EXT4-fs (sda1): mounted filesystem dde6e24e-f350-4f06-8f21-35215fa2af0d r/w with ordered data mode. Quota mode: none.
[   22.748123] EXT4-fs error (device sda6): ext4_orphan_get:1420: comm mount: bad orphan inode 1747051
[   22.748148] ext4_test_bit(bit=2154, block=6815765) = 0
[   22.748155] EXT4-fs error (device sda6): ext4_orphan_get:1420: comm mount: bad orphan inode 1746204
[   22.748163] ext4_test_bit(bit=1307, block=6815765) = 0
[   22.748168] EXT4-fs error (device sda6): ext4_orphan_get:1420: comm mount: bad orphan inode 1746377
[   22.748174] ext4_test_bit(bit=1480, block=6815765) = 0
[   22.748178] EXT4-fs error (device sda6): ext4_orphan_get:1420: comm mount: bad orphan inode 1746345
[   22.748184] ext4_test_bit(bit=1448, block=6815765) = 0
[   22.748188] EXT4-fs error (device sda6): ext4_orphan_get:1420: comm mount: bad orphan inode 1746681
[   22.748194] ext4_test_bit(bit=1784, block=6815765) = 0
[   22.748199] EXT4-fs error (device sda6): ext4_orphan_get:1420: comm mount: bad orphan inode 1746272
[   22.748204] ext4_test_bit(bit=1375, block=6815765) = 0
[   22.748240] EXT4-fs error (device sda6): ext4_orphan_get:1420: comm mount: bad orphan inode 1747026
[   22.748246] ext4_test_bit(bit=2129, block=6815765) = 0
[   22.748251] EXT4-fs error (device sda6): ext4_orphan_get:1420: comm mount: bad orphan inode 1747030
[   22.748256] ext4_test_bit(bit=2133, block=6815765) = 0
[   22.749351] EXT4-fs (sda6): recovery complete
[   22.749445] EXT4-fs (sda6): mounted filesystem 50c8a8e2-b9f7-453f-8fe3-d44576578952 r/w with ordered data mode. Quota mode: none.
[   46.011491] wlp0s29f7u2: authenticate with 4c:f5:5b:a6:f3:fc (local address=08:10:74:64:f7:df)
[   46.011500] wlp0s29f7u2: send auth to 4c:f5:5b:a6:f3:fc (try 1/3)
[   46.027049] wlp0s29f7u2: authenticated
[   46.028405] wlp0s29f7u2: associate with 4c:f5:5b:a6:f3:fc (try 1/3)
[   46.037043] wlp0s29f7u2: RX AssocResp from 4c:f5:5b:a6:f3:fc (capab=0x1431 status=0 aid=2)
[   46.040278] wlp0s29f7u2: associated
[   46.178651] wlp0s29f7u2: Limiting TX power to 30 (30 - 0) dBm as advertised by 4c:f5:5b:a6:f3:fc
[   64.472321] rfkill: input handler disabled
[   81.164923] rfkill: input handler enabled
[   87.357990] rfkill: input handler disabled
[  593.483582] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
[  650.071783] perf: interrupt took too long (3153 > 3131), lowering kernel.perf_event_max_sample_rate to 63300
[  708.029651] perf: interrupt took too long (3970 > 3941), lowering kernel.perf_event_max_sample_rate to 50100
[  844.818811] perf: interrupt took too long (4966 > 4962), lowering kernel.perf_event_max_sample_rate to 40200
[ 1612.232035] perf: interrupt took too long (6212 > 6207), lowering kernel.perf_event_max_sample_rate to 32100
[ 6007.354756] wlp0s29f7u2: authenticate with 4c:f5:5b:a6:f3:fc (local address=08:10:74:64:f7:df)
[ 6007.354786] wlp0s29f7u2: send auth to 4c:f5:5b:a6:f3:fc (try 1/3)
[ 6007.557862] wlp0s29f7u2: send auth to 4c:f5:5b:a6:f3:fc (try 2/3)
[ 6007.761170] wlp0s29f7u2: send auth to 4c:f5:5b:a6:f3:fc (try 3/3)
[ 6007.964551] wlp0s29f7u2: authentication with 4c:f5:5b:a6:f3:fc timed out
[ 6165.958092] wlp0s29f7u2: authenticate with 4c:f5:5b:a6:f3:fc (local address=08:10:74:64:f7:df)
[ 6165.958107] wlp0s29f7u2: send auth to 4c:f5:5b:a6:f3:fc (try 1/3)
[ 6165.961328] wlp0s29f7u2: authenticated
[ 6165.967826] wlp0s29f7u2: associate with 4c:f5:5b:a6:f3:fc (try 1/3)
[ 6165.975259] wlp0s29f7u2: RX AssocResp from 4c:f5:5b:a6:f3:fc (capab=0x1431 status=0 aid=4)
[ 6165.978720] wlp0s29f7u2: associated
[ 6166.071057] wlp0s29f7u2: Limiting TX power to 30 (30 - 0) dBm as advertised by 4c:f5:5b:a6:f3:fc
[ 6414.184745] wlp0s29f7u2: authenticate with 4c:f5:5b:a6:f3:fc (local address=08:10:74:64:f7:df)
[ 6414.184765] wlp0s29f7u2: send auth to 4c:f5:5b:a6:f3:fc (try 1/3)
[ 6414.387833] wlp0s29f7u2: send auth to 4c:f5:5b:a6:f3:fc (try 2/3)
[ 6414.591157] wlp0s29f7u2: send auth to 4c:f5:5b:a6:f3:fc (try 3/3)
[ 6414.794484] wlp0s29f7u2: authentication with 4c:f5:5b:a6:f3:fc timed out
[ 6480.918732] wlp0s29f7u2: authenticate with 42:ef:40:41:8c:d5 (local address=08:10:74:64:f7:df)
[ 6480.918749] wlp0s29f7u2: send auth to 42:ef:40:41:8c:d5 (try 1/3)
[ 6480.922386] wlp0s29f7u2: authenticated
[ 6480.924477] wlp0s29f7u2: associate with 42:ef:40:41:8c:d5 (try 1/3)
[ 6480.930230] wlp0s29f7u2: RX AssocResp from 42:ef:40:41:8c:d5 (capab=0x411 status=0 aid=1)
[ 6480.933697] wlp0s29f7u2: associated
[ 7215.305387] usb 2-2: USB disconnect, device number 3
[ 7215.361067] wlp0s29f7u2: deauthenticating from 42:ef:40:41:8c:d5 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7223.271116] usb 2-2: new high-speed USB device number 6 using ehci-pci
[ 7223.425402] usb 2-2: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.05
[ 7223.425418] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7223.425423] usb 2-2: Product: Mass Storage
[ 7223.425427] usb 2-2: Manufacturer: Generic
[ 7223.425431] usb 2-2: SerialNumber: A8029DAA
[ 7389.705310] usb 2-2: USB disconnect, device number 6
[ 7393.181059] usb 2-2: new high-speed USB device number 7 using ehci-pci
[ 7393.335356] usb 2-2: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.05
[ 7393.335375] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7393.335382] usb 2-2: Product: Mass Storage
[ 7393.335388] usb 2-2: Manufacturer: Generic
[ 7393.335393] usb 2-2: SerialNumber: A8029DAA
[ 7458.999030] usb 2-2: USB disconnect, device number 7
[ 7462.307997] usb 5-1: USB disconnect, device number 2
[ 7467.851056] usb 2-1: new high-speed USB device number 8 using ehci-pci
[ 7468.005730] usb 2-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.05
[ 7468.005748] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7468.005755] usb 2-1: Product: Mass Storage
[ 7468.005761] usb 2-1: Manufacturer: Generic
[ 7468.005766] usb 2-1: SerialNumber: A8029DAA
[ 7474.327729] usb 2-2: new high-speed USB device number 9 using ehci-pci
[ 7474.486093] usb 2-2: New USB device found, idVendor=0bda, idProduct=8189, bcdDevice= 2.00
[ 7474.486112] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7474.486119] usb 2-2: Product: RTL8187B_WLAN_Adapter
[ 7474.486125] usb 2-2: Manufacturer: Manufacturer_Realtek
[ 7474.486130] usb 2-2: SerialNumber: 00e04c000001
[ 7474.753896] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 7474.756412] ieee80211 phy2: hwaddr 08:10:74:64:f7:df, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[ 7474.783098] rtl8187: Customer ID is 0x00
[ 7474.784086] rtl8187: wireless switch is on
[ 7474.926375] rtl8187 2-2:1.0 wlp0s29f7u2: renamed from wlan0
[ 7490.318361] wlp0s29f7u2: authenticate with 42:ef:40:41:8c:d5 (local address=08:10:74:64:f7:df)
[ 7490.318377] wlp0s29f7u2: send auth to 42:ef:40:41:8c:d5 (try 1/3)
[ 7490.351924] wlp0s29f7u2: authenticated
[ 7490.354485] wlp0s29f7u2: associate with 42:ef:40:41:8c:d5 (try 1/3)
[ 7490.360031] wlp0s29f7u2: RX AssocResp from 42:ef:40:41:8c:d5 (capab=0x411 status=0 aid=1)
[ 7490.365274] wlp0s29f7u2: associated
[ 8111.064339] usb 2-1: USB disconnect, device number 8
[ 8125.094422] usb 5-1: new low-speed USB device number 3 using uhci_hcd
[ 8125.283375] usb 5-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[ 8125.283394] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8125.283401] usb 5-1: Product:  USB OPTICAL MOUSE
[ 8125.303989] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:15D9:0A4C.0002/input/input14
[ 8125.304786] hid-generic 0003:15D9:0A4C.0002: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[ 8493.202205] wlp0s29f7u2: deauthenticated from 42:ef:40:41:8c:d5 (Reason: 3=DEAUTH_LEAVING)
[ 8496.308234] wlp0s29f7u2: authenticate with 42:ef:40:41:8c:d5 (local address=08:10:74:64:f7:df)
[ 8496.308247] wlp0s29f7u2: send auth to 42:ef:40:41:8c:d5 (try 1/3)
[ 8496.510962] wlp0s29f7u2: send auth to 42:ef:40:41:8c:d5 (try 2/3)
[ 8496.714284] wlp0s29f7u2: send auth to 42:ef:40:41:8c:d5 (try 3/3)
[ 8496.917583] wlp0s29f7u2: authentication with 42:ef:40:41:8c:d5 timed out
[ 8522.664541] wlp0s29f7u2: authenticate with 4c:f5:5b:a6:f3:fc (local address=08:10:74:64:f7:df)
[ 8522.664556] wlp0s29f7u2: send auth to 4c:f5:5b:a6:f3:fc (try 1/3)
[ 8522.667698] wlp0s29f7u2: authenticated
[ 8522.670918] wlp0s29f7u2: associate with 4c:f5:5b:a6:f3:fc (try 1/3)
[ 8522.680477] wlp0s29f7u2: RX AssocResp from 4c:f5:5b:a6:f3:fc (capab=0x1431 status=0 aid=5)
[ 8522.684898] wlp0s29f7u2: associated
[ 8522.752747] wlp0s29f7u2: Limiting TX power to 30 (30 - 0) dBm as advertised by 4c:f5:5b:a6:f3:fc
[ 8689.650356] usb 2-2: USB disconnect, device number 9
[ 8689.714222] wlp0s29f7u2: deauthenticating from 4c:f5:5b:a6:f3:fc by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8694.560869] usb 2-2: new high-speed USB device number 11 using ehci-pci
[ 8694.715513] usb 2-2: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.05
[ 8694.715531] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8694.715536] usb 2-2: Product: Mass Storage
[ 8694.715541] usb 2-2: Manufacturer: Generic
[ 8694.715544] usb 2-2: SerialNumber: A8029DAA

Last edited by daidahan (2024-08-28 03:53:50)

V1del · 2024-08-26 17:27:40

Please wrap outputs in [ code ] [ /code ] tags without spaces. all of these basically show you aren't booting the correct and current kernel.

This happens usually for one of two reasons: You aren't mounting a /boot partition that should be mounted or you are mounting a partition while your bootloader is configured to load from the root partition. The output and the listed BOOT_IMAGE path suggest the latter. make sure you're not mounting something on /boot and try reinstalling/updating the kernel.

daidahan · 2024-08-28 03:46:13

hi, master. here give you the log. this not work.
I downgraded. then reboot. then run pacman -Syu. reboot again. It stopped working and I ran dmesg >> dmsg.txt
This is the exit.

P.S. I tried to update later from https://pkgbuild/~gromit.... but it didn't work... did you make any changes or did I change the execution order?

thanks for all

[    0.000000] Linux version 6.10.3-arch1-2 (linux@archlinux) (gcc (GCC) 14.2.1 20240805, GNU ld (GNU Binutils) 2.43.0) #1 SMP PREEMPT_DYNAMIC Tue, 06 Aug 2024 07:21:19 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b27d818a-8bf0-4e8f-8389-b683a66eab5a rw loglevel=3 quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf66d7ff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf66d800-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Dell Inc. XPS M1330                       /0N6705, BIOS A11 06/19/2008
[    0.000000] DMI: Memory slots populated: 2/2
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1496.173 MHz processor
[    0.002379] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002387] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002400] last_pfn = 0xbf66d max_arch_pfn = 0x400000000
[    0.002422] total RAM covered: 3063M
[    0.002813] Found optimal setting for mtrr clean up
[    0.002815]  gran_size: 64K 	chunk_size: 16M 	num_reg: 4  	lose cover RAM: 0G
[    0.002825] MTRR map: 7 entries (5 fixed + 2 variable; max 21), built from 8 variable MTRRs
[    0.002831] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.025281] RAMDISK: [mem 0x362ad000-0x3714dfff]
[    0.025384] ACPI: Early table checksum verification disabled
[    0.025392] ACPI: RSDP 0x00000000000FBBF0 000024 (v02 DELL  )
[    0.025401] ACPI: XSDT 0x00000000BF66F200 00005C (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025414] ACPI: FACP 0x00000000BF66F09C 0000F4 (v04 DELL   M08      27D80613 ASL  00000061)
[    0.025427] ACPI: DSDT 0x00000000BF66F800 005733 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.025436] ACPI: FACS 0x00000000BF67E000 000040
[    0.025443] ACPI: FACS 0x00000000BF67E000 000040
[    0.025450] ACPI: HPET 0x00000000BF66F300 000038 (v01 DELL   M08      00000001 ASL  00000061)
[    0.025459] ACPI: APIC 0x00000000BF66F400 000068 (v01 DELL   M08      27D80613 ASL  00000047)
[    0.025467] ACPI: MCFG 0x00000000BF66F3C0 00003E (v16 DELL   M08      27D80613 ASL  00000061)
[    0.025476] ACPI: SLIC 0x00000000BF66F49C 000176 (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025484] ACPI: BOOT 0x00000000BF66EFC0 000028 (v01 DELL   M08      27D80613 ASL  00000061)
[    0.025492] ACPI: SSDT 0x00000000BF66DA82 0004CC (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.025499] ACPI: Reserving FACP table memory at [mem 0xbf66f09c-0xbf66f18f]
[    0.025502] ACPI: Reserving DSDT table memory at [mem 0xbf66f800-0xbf674f32]
[    0.025505] ACPI: Reserving FACS table memory at [mem 0xbf67e000-0xbf67e03f]
[    0.025507] ACPI: Reserving FACS table memory at [mem 0xbf67e000-0xbf67e03f]
[    0.025510] ACPI: Reserving HPET table memory at [mem 0xbf66f300-0xbf66f337]
[    0.025512] ACPI: Reserving APIC table memory at [mem 0xbf66f400-0xbf66f467]
[    0.025515] ACPI: Reserving MCFG table memory at [mem 0xbf66f3c0-0xbf66f3fd]
[    0.025517] ACPI: Reserving SLIC table memory at [mem 0xbf66f49c-0xbf66f611]
[    0.025519] ACPI: Reserving BOOT table memory at [mem 0xbf66efc0-0xbf66efe7]
[    0.025522] ACPI: Reserving SSDT table memory at [mem 0xbf66da82-0xbf66df4d]
[    0.025641] No NUMA configuration found
[    0.025643] Faking a node at [mem 0x0000000000000000-0x00000000bf66cfff]
[    0.025649] NODE_DATA(0) allocated [mem 0xbf668000-0xbf66cfff]
[    0.025706] Zone ranges:
[    0.025708]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.025712]   DMA32    [mem 0x0000000001000000-0x00000000bf66cfff]
[    0.025716]   Normal   empty
[    0.025719]   Device   empty
[    0.025722] Movable zone start for each node
[    0.025723] Early memory node ranges
[    0.025725]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.025728]   node   0: [mem 0x0000000000100000-0x00000000bf66cfff]
[    0.025733] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf66cfff]
[    0.025745] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.025836] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.081187] On node 0, zone DMA32: 2451 pages in unavailable ranges
[    0.081211] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
[    0.081540] ACPI: PM-Timer IO Port: 0x1008
[    0.081561] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.081565] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.081585] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.081591] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.081596] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.081606] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.081609] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.081634] CPU topo: Max. logical packages:   1
[    0.081636] CPU topo: Max. logical dies:       1
[    0.081638] CPU topo: Max. dies per package:   1
[    0.081650] CPU topo: Max. threads per core:   1
[    0.081652] CPU topo: Num. cores per package:     2
[    0.081654] CPU topo: Num. threads per package:   2
[    0.081656] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[    0.081682] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.081686] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.081689] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.081693] [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.081697] Booting paravirtualized kernel on bare hardware
[    0.081703] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.099920] setup_percpu: NR_CPUS:320 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.100929] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u1048576
[    0.100944] pcpu-alloc: s233472 r8192 d28672 u1048576 alloc=1*2097152
[    0.100952] pcpu-alloc: [0] 0 1 
[    0.100997] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b27d818a-8bf0-4e8f-8389-b683a66eab5a rw loglevel=3 quiet
[    0.101167] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[    0.104497] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.106398] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.106522] Fallback order for Node 0: 0 
[    0.106537] Built 1 zonelists, mobility grouping on.  Total pages: 783883
[    0.106542] Policy zone: DMA32
[    0.108556] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.160759] Memory: 3014244K/3135532K available (18432K kernel code, 2177K rwdata, 13436K rodata, 3432K init, 3492K bss, 121028K reserved, 0K cma-reserved)
[    0.177580] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.177857] Kernel/User page tables isolation: enabled
[    0.178061] ftrace: allocating 50274 entries in 197 pages
[    0.195867] ftrace: allocated 197 pages with 4 groups
[    0.196226] Dynamic Preempt: full
[    0.196485] rcu: Preemptible hierarchical RCU implementation.
[    0.196487] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
[    0.196490] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.196493] 	Trampoline variant of Tasks RCU enabled.
[    0.196495] 	Rude variant of Tasks RCU enabled.
[    0.196496] 	Tracing variant of Tasks RCU enabled.
[    0.196498] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.196500] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.196515] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.196519] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.196522] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.209126] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
[    0.209450] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.209684] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.209856] Console: colour dummy device 80x25
[    0.209862] printk: legacy console [tty0] enabled
[    0.210706] ACPI: Core revision 20240322
[    0.211142] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.211168] APIC: Switch to symmetric I/O mode setup
[    0.211687] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.227835] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1591035f145, max_idle_ns: 440795218042 ns
[    0.227847] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.02 BogoMIPS (lpj=4987243)
[    0.227883] CPU0: Thermal monitoring enabled (TM2)
[    0.227926] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.227930] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.227937] process: using mwait in idle threads
[    0.227942] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.227947] Spectre V2 : Mitigation: Retpolines
[    0.227949] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.227951] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.227954] Speculative Store Bypass: Vulnerable
[    0.227958] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.227960] MMIO Stale Data: Unknown: No mitigations
[    0.227966] x86/fpu: x87 FPU will use FXSAVE
[    0.270334] Freeing SMP alternatives memory: 40K
[    0.270348] pid_max: default: 32768 minimum: 301
[    0.271848] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[    0.273649] landlock: Up and running.
[    0.273653] Yama: becoming mindful.
[    0.273667] LSM support for eBPF active
[    0.274038] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.274068] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.383955] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz (family: 0x6, model: 0xf, stepping: 0xd)
[    0.384508] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.384508] core: PEBS disabled due to CPU errata
[    0.384508] ... version:                2
[    0.384508] ... bit width:              40
[    0.384508] ... generic registers:      2
[    0.384508] ... value mask:             000000ffffffffff
[    0.384508] ... max period:             000000007fffffff
[    0.384508] ... fixed-purpose events:   3
[    0.384508] ... event mask:             0000000700000003
[    0.384508] signal: max sigframe size: 1440
[    0.384508] rcu: Hierarchical SRCU implementation.
[    0.384508] rcu: 	Max phase no-delay instances is 1000.
[    0.384508] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.384508] smp: Bringing up secondary CPUs ...
[    0.384508] smpboot: x86: Booting SMP configuration:
[    0.384508] .... node  #0, CPUs:      #1
[    0.384651] smp: Brought up 1 node, 2 CPUs
[    0.384651] smpboot: Total of 2 processors activated (5987.05 BogoMIPS)
[    0.388585] devtmpfs: initialized
[    0.388585] x86/mm: Memory block size: 128MB
[    0.389331] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.389350] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.391669] pinctrl core: initialized pinctrl subsystem
[    0.391971] PM: RTC time: 16:46:50, date: 2024-08-16
[    0.394388] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.395088] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.395380] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.395632] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.395674] audit: initializing netlink subsys (disabled)
[    0.395718] audit: type=2000 audit(1723826809.183:1): state=initialized audit_enabled=0 res=1
[    0.395718] thermal_sys: Registered thermal governor 'fair_share'
[    0.395718] thermal_sys: Registered thermal governor 'bang_bang'
[    0.395718] thermal_sys: Registered thermal governor 'step_wise'
[    0.395718] thermal_sys: Registered thermal governor 'user_space'
[    0.395718] thermal_sys: Registered thermal governor 'power_allocator'
[    0.395718] cpuidle: using governor ladder
[    0.395718] cpuidle: using governor menu
[    0.395718] Simple Boot Flag at 0x79 set to 0x1
[    0.395718] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.395718] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[    0.395718] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry
[    0.395718] PCI: Using configuration type 1 for base access
[    0.395718] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.414570] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.414577] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.415352] Demotion targets for Node 0: null
[    0.416093] ACPI: Added _OSI(Module Device)
[    0.416093] ACPI: Added _OSI(Processor Device)
[    0.416093] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.416093] ACPI: Added _OSI(Processor Aggregator Device)
[    0.427975] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.443803] ACPI: Dynamic OEM Table Load:
[    0.443817] ACPI: SSDT 0xFFFF8887C18A9F00 000043 (v01 LMPWR  DELLLOM  00001001 INTL 20050624)
[    0.444900] ACPI: Dynamic OEM Table Load:
[    0.444912] ACPI: SSDT 0xFFFF8887C12EBC00 0001C0 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.445845] ACPI: Dynamic OEM Table Load:
[    0.445857] ACPI: SSDT 0xFFFF8887C19AD000 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.447025] ACPI: Dynamic OEM Table Load:
[    0.447036] ACPI: SSDT 0xFFFF8887C18A8100 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[    0.447727] ACPI: Dynamic OEM Table Load:
[    0.447736] ACPI: SSDT 0xFFFF8887C18BB9C0 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[    0.448607] ACPI: _OSC evaluated successfully for all CPUs
[    0.448879] ACPI: Interpreter enabled
[    0.448910] ACPI: PM: (supports S0 S3 S4 S5)
[    0.448913] ACPI: Using IOAPIC for interrupt routing
[    0.449767] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.449771] PCI: Using E820 reservations for host bridge windows
[    0.450142] ACPI: Enabled 13 GPEs in block 00 to 1F
[    0.590427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.590446] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.590469] acpi PNP0A03:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.608901] PCI host bridge to bus 0000:00
[    0.608907] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.608913] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.608917] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.608921] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.608925] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff window]
[    0.608928] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[    0.608932] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[    0.608935] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window]
[    0.608938] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window]
[    0.608942] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window]
[    0.608945] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window]
[    0.608948] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window]
[    0.608952] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.608990] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 conventional PCI endpoint
[    0.609158] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000 conventional PCI endpoint
[    0.609177] pci 0000:00:02.0: BAR 0 [mem 0xfea00000-0xfeafffff 64bit]
[    0.609189] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.609198] pci 0000:00:02.0: BAR 4 [io  0xeff8-0xefff]
[    0.609224] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.609412] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000 conventional PCI endpoint
[    0.609429] pci 0000:00:02.1: BAR 0 [mem 0xfeb00000-0xfebfffff 64bit]
[    0.609676] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 conventional PCI endpoint
[    0.609748] pci 0000:00:1a.0: BAR 4 [io  0x6f20-0x6f3f]
[    0.609946] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 conventional PCI endpoint
[    0.610018] pci 0000:00:1a.1: BAR 4 [io  0x6f00-0x6f1f]
[    0.610234] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.610262] pci 0000:00:1a.7: BAR 0 [mem 0xfed1c400-0xfed1c7ff]
[    0.610384] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.610588] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[    0.610621] pci 0000:00:1b.0: BAR 0 [mem 0xfe9fc000-0xfe9fffff 64bit]
[    0.610765] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.611001] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 PCIe Root Port
[    0.611052] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.611183] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.611448] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 PCIe Root Port
[    0.611499] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.611511] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.611628] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.611865] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400 PCIe Root Port
[    0.611916] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.611925] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.611932] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.611950] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.612051] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.612508] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400 PCIe Root Port
[    0.612559] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.612572] pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.612689] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.612924] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 conventional PCI endpoint
[    0.612996] pci 0000:00:1d.0: BAR 4 [io  0x6f80-0x6f9f]
[    0.613208] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 conventional PCI endpoint
[    0.613279] pci 0000:00:1d.1: BAR 4 [io  0x6f60-0x6f7f]
[    0.613486] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 conventional PCI endpoint
[    0.613557] pci 0000:00:1d.2: BAR 4 [io  0x6f40-0x6f5f]
[    0.613773] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 conventional PCI endpoint
[    0.613801] pci 0000:00:1d.7: BAR 0 [mem 0xfed1c000-0xfed1c3ff]
[    0.613923] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.614116] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 conventional PCI bridge
[    0.614165] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.614178] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.614432] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 conventional PCI endpoint
[    0.614571] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.614581] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.614587] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.614596] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.614827] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a conventional PCI endpoint
[    0.614854] pci 0000:00:1f.1: BAR 0 [io  0x01f0-0x01f7]
[    0.614870] pci 0000:00:1f.1: BAR 1 [io  0x03f4-0x03f7]
[    0.614884] pci 0000:00:1f.1: BAR 2 [io  0x0170-0x0177]
[    0.614899] pci 0000:00:1f.1: BAR 3 [io  0x0374-0x0377]
[    0.614913] pci 0000:00:1f.1: BAR 4 [io  0x6fa0-0x6faf]
[    0.614943] pci 0000:00:1f.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    0.614947] pci 0000:00:1f.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    0.614950] pci 0000:00:1f.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    0.614954] pci 0000:00:1f.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    0.615132] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 conventional PCI endpoint
[    0.615159] pci 0000:00:1f.2: BAR 0 [io  0x6eb0-0x6eb7]
[    0.615174] pci 0000:00:1f.2: BAR 1 [io  0x6eb8-0x6ebb]
[    0.615189] pci 0000:00:1f.2: BAR 2 [io  0x6ec0-0x6ec7]
[    0.615203] pci 0000:00:1f.2: BAR 3 [io  0x6ec8-0x6ecb]
[    0.615217] pci 0000:00:1f.2: BAR 4 [io  0x6ee0-0x6eff]
[    0.615231] pci 0000:00:1f.2: BAR 5 [mem 0xfe9fb800-0xfe9fbfff]
[    0.615305] pci 0000:00:1f.2: PME# supported from D3hot
[    0.615475] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 conventional PCI endpoint
[    0.615502] pci 0000:00:1f.3: BAR 0 [mem 0xfe9fb700-0xfe9fb7ff]
[    0.615550] pci 0000:00:1f.3: BAR 4 [io  0x10c0-0x10df]
[    0.615763] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.615905] pci 0000:0c:00.0: [14e4:4311] type 00 class 0x028000 PCIe Legacy Endpoint
[    0.615941] pci 0000:0c:00.0: BAR 0 [mem 0xfe8fc000-0xfe8fffff]
[    0.616053] pci 0000:0c:00.0: enabling Extended Tags
[    0.616168] pci 0000:0c:00.0: supports D1 D2
[    0.616392] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.616416] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.616559] acpiphp: Slot [1] registered
[    0.616569] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.616784] pci 0000:09:00.0: [14e4:1713] type 00 class 0x020000 PCIe Endpoint
[    0.616875] pci 0000:09:00.0: BAR 0 [mem 0xfe5f0000-0xfe5fffff 64bit]
[    0.617080] pci 0000:09:00.0: enabling Extended Tags
[    0.617399] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.617903] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.617952] pci_bus 0000:03: extended config space not accessible
[    0.618045] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via FireWire function)
[    0.618049] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[    0.618053] pci 0000:03:01.0: [1180:0832] type 00 class 0x0c0010 conventional PCI endpoint
[    0.618080] pci 0000:03:01.0: BAR 0 [mem 0xfe4ff800-0xfe4fffff]
[    0.618202] pci 0000:03:01.0: supports D1 D2
[    0.618206] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.618374] pci 0000:03:01.1: [1180:0822] type 00 class 0x080501 conventional PCI endpoint
[    0.618402] pci 0000:03:01.1: BAR 0 [mem 0xfe4ff400-0xfe4ff4ff]
[    0.618524] pci 0000:03:01.1: supports D1 D2
[    0.618527] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.618654] pci 0000:03:01.2: [1180:0592] type 00 class 0x088000 conventional PCI endpoint
[    0.618681] pci 0000:03:01.2: BAR 0 [mem 0xfe4ff600-0xfe4ff6ff]
[    0.618802] pci 0000:03:01.2: supports D1 D2
[    0.618805] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.618913] pci 0000:03:01.3: [1180:0852] type 00 class 0x088000 conventional PCI endpoint
[    0.618941] pci 0000:03:01.3: BAR 0 [mem 0xfe4ff700-0xfe4ff7ff]
[    0.619063] pci 0000:03:01.3: supports D1 D2
[    0.619066] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.619223] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.619241] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.619246] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.619249] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.619253] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.619257] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xf7ffffff window] (subtractive decode)
[    0.619269] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[    0.619273] pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[    0.619276] pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode)
[    0.619280] pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode)
[    0.619284] pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode)
[    0.619287] pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode)
[    0.619291] pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode)
[    0.620211] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.620384] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.620555] ACPI: PCI: Interrupt link LNKC configured for IRQ 4
[    0.620725] ACPI: PCI: Interrupt link LNKD configured for IRQ 5
[    0.620895] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.621065] ACPI: PCI: Interrupt link LNKF configured for IRQ 9
[    0.621248] ACPI: PCI: Interrupt link LNKG configured for IRQ 7
[    0.621396] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.621400] ACPI: PCI: Interrupt link LNKH disabled
[    0.622227] iommu: Default domain type: Translated
[    0.622227] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.624662] SCSI subsystem initialized
[    0.624679] libata version 3.00 loaded.
[    0.624679] ACPI: bus type USB registered
[    0.624679] usbcore: registered new interface driver usbfs
[    0.624679] usbcore: registered new interface driver hub
[    0.624679] usbcore: registered new device driver usb
[    0.624705] EDAC MC: Ver: 3.0.0
[    0.625031] NetLabel: Initializing
[    0.625035] NetLabel:  domain hash size = 128
[    0.625038] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.625074] NetLabel:  unlabeled traffic allowed by default
[    0.625084] mctp: management component transport protocol core
[    0.625087] NET: Registered PF_MCTP protocol family
[    0.625096] PCI: Using ACPI for IRQ routing
[    0.626873] PCI: pci_cache_line_size set to 64 bytes
[    0.626992] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.626997] e820: reserve RAM buffer [mem 0xbf66d800-0xbfffffff]
[    0.627899] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.627899] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.627899] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.627899] vgaarb: loaded
[    0.627928] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.627935] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.627945] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.631176] clocksource: Switched to clocksource tsc-early
[    0.633938] VFS: Disk quotas dquot_6.6.0
[    0.634017] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.634211] pnp: PnP ACPI init
[    0.634627] system 00:03: [io  0x0c80-0x0cff] could not be reserved
[    0.634811] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.635072] pnp 00:05: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635080] pnp 00:05: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635129] system 00:05: [io  0x0900-0x097f] has been reserved
[    0.635135] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.635201] pnp 00:06: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635208] pnp 00:06: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635213] pnp 00:06: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635218] pnp 00:06: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.635274] system 00:06: [io  0xf400-0xf4fe] has been reserved
[    0.635280] system 00:06: [io  0x1080-0x10bf] has been reserved
[    0.635284] system 00:06: [io  0x10c0-0x10df] has been reserved
[    0.635288] system 00:06: [io  0x0809] has been reserved
[    0.655965] pnp 00:07: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.656049] system 00:07: [mem 0x00000000-0x0009efff] could not be reserved
[    0.656055] system 00:07: [mem 0x0009f000-0x0009ffff] could not be reserved
[    0.656059] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.656063] system 00:07: [mem 0x00100000-0xbf66d7ff] could not be reserved
[    0.656068] system 00:07: [mem 0xbf66d800-0xbf6fffff] has been reserved
[    0.656073] system 00:07: [mem 0xbf700000-0xbf7fffff] has been reserved
[    0.656077] system 00:07: [mem 0xbf700000-0xbfefffff] could not be reserved
[    0.656082] system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
[    0.656086] system 00:07: [mem 0xffa00000-0xffbfffff] has been reserved
[    0.656090] system 00:07: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.656094] system 00:07: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.656099] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.656103] system 00:07: [mem 0xfeda0000-0xfeda3fff] has been reserved
[    0.656107] system 00:07: [mem 0xfeda4000-0xfeda4fff] has been reserved
[    0.656112] system 00:07: [mem 0xfeda5000-0xfeda5fff] has been reserved
[    0.656116] system 00:07: [mem 0xfeda6000-0xfeda6fff] has been reserved
[    0.656121] system 00:07: [mem 0xfed18000-0xfed1bfff] has been reserved
[    0.656125] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.656248] pnp: PnP ACPI: found 8 devices
[    0.664612] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.665027] NET: Registered PF_INET protocol family
[    0.665294] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.698765] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.698853] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.698945] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.699286] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.699528] TCP: Hash tables configured (established 32768 bind 32768)
[    0.700048] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.700196] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.700254] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.700450] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.700472] NET: Registered PF_XDP protocol family
[    0.700490] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.700501] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[    0.700508] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[    0.700515] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 0c] add_size 1000
[    0.700520] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000
[    0.700528] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
[    0.700541] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[    0.700579] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]: assigned
[    0.700589] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]: assigned
[    0.700597] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]: assigned
[    0.700603] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]: assigned
[    0.700610] pci 0000:00:1c.0: bridge window [io  0x2000-0x2fff]: assigned
[    0.700615] pci 0000:00:1c.1: bridge window [io  0x3000-0x3fff]: assigned
[    0.700620] pci 0000:00:1c.5: bridge window [io  0x4000-0x4fff]: assigned
[    0.700630] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.700636] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.700645] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.700652] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.700663] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.700667] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.700675] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.700682] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.700693] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.700697] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.700706] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.700712] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.700723] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.700727] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.700735] pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.700742] pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.700754] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.700762] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.700776] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.700780] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.700784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.700787] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.700791] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.700794] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.700798] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.700802] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.700805] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.700809] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff window]
[    0.700812] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff window]
[    0.700816] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff window]
[    0.700819] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.700823] pci_bus 0000:0b: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.700826] pci_bus 0000:0b: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.700830] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    0.700834] pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.700837] pci_bus 0000:0c: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.700841] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
[    0.700845] pci_bus 0000:0d: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.700848] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.700852] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.700855] pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.700859] pci_bus 0000:09: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.700863] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.700866] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.700870] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.700873] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.700877] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.700880] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.700884] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.700887] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.700891] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.700895] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.700899] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff window]
[    0.700902] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff window]
[    0.700906] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff window]
[    0.704200] PCI: CLS 64 bytes, default 64
[    0.704378] Trying to unpack rootfs image as initramfs...
[    0.705657] Initialise system trusted keyrings
[    0.705694] Key type blacklist registered
[    0.705893] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[    0.705915] zbud: loaded
[    0.706902] fuse: init (API version 7.40)
[    0.707382] integrity: Platform Keyring initialized
[    0.707403] integrity: Machine keyring initialized
[    0.740546] Key type asymmetric registered
[    0.740559] Asymmetric key parser 'x509' registered
[    0.740713] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.741187] io scheduler mq-deadline registered
[    0.741192] io scheduler kyber registered
[    0.741265] io scheduler bfq registered
[    0.743025] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.743262] Monitor-Mwait will be used to enter C-1 state
[    0.743285] Monitor-Mwait will be used to enter C-2 state
[    0.743299] Monitor-Mwait will be used to enter C-3 state
[    0.743308] ACPI: \_PR_.CPU0: Found 3 idle states
[    0.743924] ACPI: AC: AC Adapter [AC] (on-line)
[    0.744064] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.746795] ACPI: button: Lid Switch [LID]
[    0.746926] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.747032] ACPI: button: Power Button [PBTN]
[    0.747110] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.747162] ACPI: button: Sleep Button [SBTN]
[    0.756193] thermal LNXTHERM:00: registered as thermal_zone0
[    0.756206] ACPI: thermal: Thermal Zone [THM] (25 C)
[    0.756754] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.773709] Non-volatile memory driver v1.3
[    0.773719] Linux agpgart interface v0.103
[    0.773837] ACPI: bus type drm_connector registered
[    0.774787] ahci 0000:00:1f.2: version 3.0
[    0.775517] ahci 0000:00:1f.2: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
[    0.775528] ahci 0000:00:1f.2: 2/3 ports implemented (port mask 0x5)
[    0.775532] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    0.790177] scsi host0: ahci
[    0.796802] scsi host1: ahci
[    0.803462] scsi host2: ahci
[    0.803968] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 24 lpm-pol 3
[    0.803974] ata2: DUMMY
[    0.803978] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 24 lpm-pol 3
[    0.804816] ACPI: battery: Slot [BAT0] (battery present)
[    0.805482] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.805498] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.805512] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.805563] uhci_hcd 0000:00:1a.0: irq 20, io port 0x00006f20
[    0.805931] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.805939] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.805943] usb usb1: Product: UHCI Host Controller
[    0.805947] usb usb1: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.805950] usb usb1: SerialNumber: 0000:00:1a.0
[    0.806262] hub 1-0:1.0: USB hub found
[    0.806279] hub 1-0:1.0: 2 ports detected
[    0.806967] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.806981] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    0.806994] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.807056] uhci_hcd 0000:00:1a.1: irq 21, io port 0x00006f00
[    0.807187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.807193] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.807197] usb usb2: Product: UHCI Host Controller
[    0.807201] usb usb2: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.807204] usb usb2: SerialNumber: 0000:00:1a.1
[    0.807464] hub 2-0:1.0: USB hub found
[    0.807482] hub 2-0:1.0: 2 ports detected
[    0.808038] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.808050] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    0.808084] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.808115] uhci_hcd 0000:00:1d.0: irq 20, io port 0x00006f80
[    0.808236] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.808242] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.808246] usb usb3: Product: UHCI Host Controller
[    0.808250] usb usb3: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.808253] usb usb3: SerialNumber: 0000:00:1d.0
[    0.808494] hub 3-0:1.0: USB hub found
[    0.808511] hub 3-0:1.0: 2 ports detected
[    0.809048] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.809061] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    0.809072] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.809102] uhci_hcd 0000:00:1d.1: irq 21, io port 0x00006f60
[    0.809218] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.809224] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.809228] usb usb4: Product: UHCI Host Controller
[    0.809231] usb usb4: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.809235] usb usb4: SerialNumber: 0000:00:1d.1
[    0.809493] hub 4-0:1.0: USB hub found
[    0.809510] hub 4-0:1.0: 2 ports detected
[    0.810120] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.810132] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    0.810144] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.810189] uhci_hcd 0000:00:1d.2: irq 22, io port 0x00006f40
[    0.810322] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[    0.810329] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.810332] usb usb5: Product: UHCI Host Controller
[    0.810336] usb usb5: Manufacturer: Linux 6.10.3-arch1-2 uhci_hcd
[    0.810340] usb usb5: SerialNumber: 0000:00:1d.2
[    0.813523] hub 5-0:1.0: USB hub found
[    0.813569] hub 5-0:1.0: 2 ports detected
[    0.814073] usbcore: registered new interface driver usbserial_generic
[    0.814087] usbserial: USB Serial support registered for generic
[    0.814339] rtc_cmos 00:02: RTC can wake from S4
[    0.814801] rtc_cmos 00:02: registered as rtc0
[    0.814852] rtc_cmos 00:02: setting system clock to 2024-08-16T16:46:50 UTC (1723826810)
[    0.814922] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.815098] intel_pstate: CPU model not supported
[    0.815138] ledtrig-cpu: registered to indicate activity on CPUs
[    0.815978] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.818500] fbcon: Deferring console take-over
[    0.818515] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.818666] hid: raw HID events driver (C) Jiri Kosina
[    0.818859] drop_monitor: Initializing network drop monitor service
[    0.819418] NET: Registered PF_INET6 protocol family
[    0.867275] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.867302] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    0.867327] ehci-pci 0000:00:1a.7: debug port 1
[    0.871283] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    0.883501] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.883802] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    0.883810] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.883815] usb usb6: Product: EHCI Host Controller
[    0.883820] usb usb6: Manufacturer: Linux 6.10.3-arch1-2 ehci_hcd
[    0.883823] usb usb6: SerialNumber: 0000:00:1a.7
[    0.884420] hub 6-0:1.0: USB hub found
[    0.884447] hub 6-0:1.0: 4 ports detected
[    0.886119] Freeing initrd memory: 14980K
[    0.901954] Segment Routing with IPv6
[    0.901963] RPL Segment Routing with IPv6
[    0.902005] In-situ OAM (IOAM) with IPv6
[    0.902071] NET: Registered PF_PACKET protocol family
[    0.902479] microcode: Current revision: 0x000000a3
[    0.902596] IPI shorthand broadcast: enabled
[    0.908783] sched_clock: Marking stable (905002132, 1678242)->(909551301, -2870927)
[    0.909047] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.909136] registered taskstats version 1
[    0.909474] Loading compiled-in X.509 certificates
[    0.910146] hub 1-0:1.0: USB hub found
[    0.910166] hub 1-0:1.0: 2 ports detected
[    0.919495] Loaded X.509 cert 'Build time autogenerated kernel key: 634e326a06f4fa787244b126c789fbd74e2348e3'
[    0.932106] zswap: loaded using pool zstd/zsmalloc
[    0.932348] Demotion targets for Node 0: null
[    0.933261] Key type .fscrypt registered
[    0.933265] Key type fscrypt-provisioning registered
[    0.934341] PM:   Magic number: 4:149:793
[    0.936945] hub 2-0:1.0: USB hub found
[    0.936972] hub 2-0:1.0: 2 ports detected
[    0.942707] RAS: Correctable Errors collector initialized.
[    0.976765] clk: Disabling unused clocks
[    0.976775] PM: genpd: Disabling unused power domains
[    0.992079] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    0.993007] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    1.004953] ata3: SATA link down (SStatus 0 SControl 300)
[    1.005009] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.039823] ata1.00: ATA-8: WDC WD1200BEVS-75UST0, 01.01A01, max UDMA/133
[    1.039969] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 32), AA
[    1.040900] ata1.00: configured for UDMA/133
[    1.041282] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-7 1A01 PQ: 0 ANSI: 5
[    1.042123] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.042147] sd 0:0:0:0: [sda] Write Protect is off
[    1.042153] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.042185] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.042243] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    1.083994] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[    1.084008] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.084015] usb 3-1: Product:  USB OPTICAL MOUSE
[    1.084765]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    1.085270] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.087273] usb 3-1: USB disconnect, device number 2
[    1.088177] usb 5-1: New USB device found, idVendor=0483, idProduct=2016, bcdDevice= 0.01
[    1.088188] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.088194] usb 5-1: Product: Biometric Coprocessor
[    1.088200] usb 5-1: Manufacturer: STMicroelectronics
[    1.092321] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large:
[    1.092329] clocksource:                       'hpet' wd_nsec: 506846855 wd_now: e3a1ab wd_last: 74e587 mask: ffffffff
[    1.092336] clocksource:                       'tsc-early' cs_nsec: 348963364 cs_now: 4b6c4770f cs_last: 497a5b49a mask: ffffffffffffffff
[    1.092342] clocksource:                       Clocksource 'tsc-early' skewed -157883491 ns (-157 ms) over watchdog 'hpet' interval of 506846855 ns (506 ms)
[    1.092349] clocksource:                       'tsc-early' is current clocksource.
[    1.092357] tsc: Marking TSC unstable due to clocksource watchdog
[    1.092381] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[    1.092386] sched_clock: Marking unstable (1090702543, 1678242)<-(1095251726, -2870927)
[    1.092662] clocksource: Switched to clocksource hpet
[    1.361903] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[    1.528425] usb 5-2: not running at top speed; connect to a high speed hub
[    1.619427] usb 5-2: New USB device found, idVendor=05a9, idProduct=2640, bcdDevice= 1.00
[    1.619437] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.619444] usb 5-2: Product: Laptop Integrated Webcam
[    1.619449] usb 5-2: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3
[    1.624725] usb 5-1: USB disconnect, device number 2
[    1.625046] usb 5-2: USB disconnect, device number 3
[    1.625829] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.625843] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    1.625864] ehci-pci 0000:00:1d.7: debug port 1
[    1.629828] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    1.645231] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.645357] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    1.645366] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.645372] usb usb7: Product: EHCI Host Controller
[    1.645378] usb usb7: Manufacturer: Linux 6.10.3-arch1-2 ehci_hcd
[    1.645383] usb usb7: SerialNumber: 0000:00:1d.7
[    1.645675] hub 7-0:1.0: USB hub found
[    1.645693] hub 7-0:1.0: 6 ports detected
[    1.675356] hub 3-0:1.0: USB hub found
[    1.675396] hub 3-0:1.0: 2 ports detected
[    1.702009] hub 4-0:1.0: USB hub found
[    1.702034] hub 4-0:1.0: 2 ports detected
[    1.728682] hub 5-0:1.0: USB hub found
[    1.728706] hub 5-0:1.0: 2 ports detected
[    1.732775] Freeing unused decrypted memory: 2028K
[    1.735274] Freeing unused kernel image (initmem) memory: 3432K
[    1.735462] Write protecting the kernel read-only data: 32768k
[    1.736549] Freeing unused kernel image (rodata/data gap) memory: 900K
[    1.829025] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.829037] rodata_test: all tests were successful
[    1.829053] x86/mm: Checking user space page tables
[    1.918026] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.918036] Run /init as init process
[    1.918039]   with arguments:
[    1.918042]     /init
[    1.918045]   with environment:
[    1.918047]     HOME=/
[    1.918049]     TERM=linux
[    1.918051]     BOOT_IMAGE=/boot/vmlinuz-linux
[    2.042869] usb 3-1: new low-speed USB device number 3 using uhci_hcd
[    2.231285] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[    2.231300] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.231304] usb 3-1: Product:  USB OPTICAL MOUSE
[    2.289630] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQBC data block query control method not found
[    2.299976] usbcore: registered new interface driver usbhid
[    2.299986] usbhid: USB HID core driver
[    2.329333] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.336532] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.336669] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.362513] ata_piix 0000:00:1f.1: version 2.13
[    2.370158] scsi host3: ata_piix
[    2.370511] scsi host4: ata_piix
[    2.370609] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 lpm-pol 0
[    2.370614] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 lpm-pol 0
[    2.545453] ata4.00: ATAPI: HL-DT-ST DVDRW  GSA-S10N, A100, max UDMA/33
[    2.575214] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRW  GSA-S10N  A100 PQ: 0 ANSI: 5
[    2.724338] sdhci: Secure Digital Host Controller Interface driver
[    2.724347] sdhci: Copyright(c) Pierre Ossman
[    2.791304] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
[    2.792080] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    2.793053] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[    2.794156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.805126] firewire_ohci 0000:03:01.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.818564] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
[    2.848414] usb 5-1: new full-speed USB device number 4 using uhci_hcd
[    2.854375] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[    2.854385] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.888880] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.895449] b43-pci-bridge 0000:0c:00.0: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
[    3.037500] usb 5-1: New USB device found, idVendor=0483, idProduct=2016, bcdDevice= 0.01
[    3.037525] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.037529] usb 5-1: Product: Biometric Coprocessor
[    3.037534] usb 5-1: Manufacturer: STMicroelectronics
[    3.332106] firewire_core 0000:03:01.0: created device fw0: GUID 464fc00016568da1, S400
[    3.541722] usb 7-6: new high-speed USB device number 4 using ehci-pci
[    3.693523] usb 7-6: New USB device found, idVendor=05a9, idProduct=2640, bcdDevice= 1.00
[    3.693532] usb 7-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.693537] usb 7-6: Product: Laptop Integrated Webcam
[    3.693541] usb 7-6: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3
[    4.171143] pci 0000:00:00.0: Intel 965GM Chipset
[    4.171189] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    4.171542] pci 0000:00:00.0: detected 8192K stolen memory
[    4.198952] i915 0000:00:02.0: vgaarb: deactivate vga console
[    4.329657] i915 0000:00:02.0: [drm] Initialized overlay support.
[    4.330503] i915 0000:00:02.0: [drm] Skipping intel_backlight registration
[    4.330662] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1
[    4.331035] ACPI: video: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[    4.335977] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input5
[    4.336130] ACPI: video: [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    4.352682] acpi device:34: registered as cooling_device2
[    4.376347] fbcon: i915drmfb (fb0) is primary device
[    4.376354] fbcon: Deferring console take-over
[    4.376362] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    4.434342] fbcon: Taking over console
[    5.251537] Console: switching to colour frame buffer device 160x50
[    5.974562] EXT4-fs (sda2): mounted filesystem b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w with ordered data mode. Quota mode: none.
[    7.589570] random: crng init done
[    7.739569] systemd[1]: systemd 256.4-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[    7.739588] systemd[1]: Detected architecture x86-64.
[    7.775818] systemd[1]: Hostname set to <daidacorp>.
[    8.208769] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[    9.314363] (sd-exec-[236]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[   10.239254] systemd[1]: Queued start job for default target Graphical Interface.
[   10.325443] systemd[1]: Created slice Slice /system/dirmngr.
[   10.326543] systemd[1]: Created slice Slice /system/getty.
[   10.327487] systemd[1]: Created slice Slice /system/gpg-agent.
[   10.328478] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[   10.329447] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[   10.330385] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[   10.331320] systemd[1]: Created slice Slice /system/keyboxd.
[   10.332321] systemd[1]: Created slice Slice /system/modprobe.
[   10.333269] systemd[1]: Created slice Slice /system/systemd-fsck.
[   10.333984] systemd[1]: Created slice User and Session Slice.
[   10.334185] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   10.334344] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.334807] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.334884] systemd[1]: Expecting device /dev/sda1...
[   10.334920] systemd[1]: Expecting device /dev/sda6...
[   10.334967] systemd[1]: Reached target Local Encrypted Volumes.
[   10.335052] systemd[1]: Reached target Login Prompts.
[   10.335114] systemd[1]: Reached target Local Integrity Protected Volumes.
[   10.335191] systemd[1]: Reached target Remote File Systems.
[   10.335246] systemd[1]: Reached target Slice Units.
[   10.335311] systemd[1]: Reached target Swaps.
[   10.335379] systemd[1]: Reached target Local Verity Protected Volumes.
[   10.335614] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   10.340261] systemd[1]: Listening on Process Core Dump Socket.
[   10.342816] systemd[1]: Listening on Credential Encryption/Decryption.
[   10.343099] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.343353] systemd[1]: Listening on Journal Sockets.
[   10.343428] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.343481] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.343706] systemd[1]: Listening on udev Control Socket.
[   10.343883] systemd[1]: Listening on udev Kernel Socket.
[   10.344082] systemd[1]: Listening on User Database Manager Socket.
[   10.357074] systemd[1]: Mounting Huge Pages File System...
[   10.359010] systemd[1]: Mounting POSIX Message Queue File System...
[   10.365395] systemd[1]: Mounting Kernel Debug File System...
[   10.367581] systemd[1]: Mounting Kernel Trace File System...
[   10.401403] systemd[1]: Mounting Temporary Directory /tmp...
[   10.405380] systemd[1]: Starting Create List of Static Device Nodes...
[   10.410713] systemd[1]: Starting Load Kernel Module configfs...
[   10.425376] systemd[1]: Starting Load Kernel Module dm_mod...
[   10.432265] systemd[1]: Starting Load Kernel Module drm...
[   10.455476] systemd[1]: Starting Load Kernel Module fuse...
[   10.462081] systemd[1]: Starting Load Kernel Module loop...
[   10.462233] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[   10.462343] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[   10.471511] systemd[1]: Starting Journal Service...
[   10.535384] systemd[1]: Starting Load Kernel Modules...
[   10.535451] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.537547] systemd[1]: Starting Remount Root and Kernel File Systems...
[   10.537662] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.545789] systemd[1]: Starting Load udev Rules from Credentials...
[   10.555544] systemd[1]: Starting Coldplug All udev Devices...
[   10.571112] loop: module loaded
[   10.573813] systemd[1]: Mounted Huge Pages File System.
[   10.574471] systemd[1]: Mounted POSIX Message Queue File System.
[   10.574765] systemd[1]: Mounted Kernel Debug File System.
[   10.575087] systemd[1]: Mounted Kernel Trace File System.
[   10.575353] systemd[1]: Mounted Temporary Directory /tmp.
[   10.581898] systemd[1]: Finished Create List of Static Device Nodes.
[   10.582895] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   10.583545] systemd[1]: Finished Load Kernel Module configfs.
[   10.585440] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   10.585970] systemd[1]: Finished Load Kernel Module drm.
[   10.586751] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   10.587258] systemd[1]: Finished Load Kernel Module fuse.
[   10.587993] systemd[1]: modprobe@loop.service: Deactivated successfully.
[   10.588589] systemd[1]: Finished Load Kernel Module loop.
[   10.591440] systemd[1]: Mounting FUSE Control File System...
[   10.595349] systemd[1]: Mounting Kernel Configuration File System...
[   10.612179] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[   10.619659] systemd[1]: Mounted FUSE Control File System.
[   10.637379] EXT4-fs (sda2): re-mounted b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w. Quota mode: none.
[   10.638440] EXT4-fs (sda2): re-mounted b27d818a-8bf0-4e8f-8389-b683a66eab5a r/w. Quota mode: none.
[   10.643026] systemd[1]: Finished Remount Root and Kernel File Systems.
[   10.643530] systemd[1]: Mounted Kernel Configuration File System.
[   10.694780] systemd-journald[263]: Collecting audit messages is disabled.
[   10.785618] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[   10.792686] systemd[1]: Starting Load/Save OS Random Seed...
[   10.792754] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   10.811790] systemd[1]: Finished Load udev Rules from Credentials.
[   10.875422] device-mapper: uevent: version 1.0.3
[   10.875623] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[   10.877587] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   10.878210] systemd[1]: Finished Load Kernel Module dm_mod.
[   10.878662] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[   10.881327] systemd[1]: Started Journal Service.
[   11.441748] systemd-journald[263]: Received client request to flush runtime journal.
[   14.935629] input: Quickstart Button 0 as /devices/platform/PNP0C32:00/input/input6
[   15.172423] r592: driver successfully loaded
[   15.192512] pps_core: LinuxPPS API ver. 1 registered
[   15.192524] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   15.244722] PTP clock support registered
[   15.306579] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[   15.336286] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   15.353826] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input7
[   15.436441] mc: Linux media interface: v0.10
[   15.483446] tg3 0000:09:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:15:c5:7d:7f:41
[   15.483461] tg3 0000:09:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
[   15.483467] tg3 0000:09:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[   15.483472] tg3 0000:09:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   15.491673] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   15.549696] i2c i2c-9: Successfully instantiated SPD at 0x50
[   15.654581] videodev: Linux video capture interface: v2.00
[   15.925675] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   15.959854] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0001/input/input10
[   15.965496] hid-generic 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[   15.972862] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   15.993102] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   15.993686] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   16.130936] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04753/0x200000/0x0/0x0, board id: 0, fw id: 356587
[   16.168563] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   16.187586] iTCO_vendor_support: vendor-support=0
[   16.254646] gpio_ich gpio_ich.2.auto: GPIO from 528 to 577
[   16.265084] at24 9-0050: supply vcc not found, using dummy regulator
[   16.266506] at24 9-0050: 256 byte spd EEPROM, read-only
[   16.339252] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   16.339274] cfg80211: failed to load regulatory.db
[   16.377624] iTCO_wdt iTCO_wdt.1.auto: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[   16.378194] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[   16.430373] usb 7-6: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[   16.438709] usbcore: registered new interface driver uvcvideo
[   16.464790] mousedev: PS/2 mouse device common for all mice
[   16.501808] tg3 0000:09:00.0 enp9s0: renamed from eth0
[   17.819287] intel_powerclamp: No package C-state available
[   17.828195] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9228: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   17.828213] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.828221] snd_hda_codec_idt hdaudioC0D0:    hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
[   17.828229] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   17.828234] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x21/0x0
[   17.828240] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   17.828245] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x13
[   17.828251] snd_hda_codec_idt hdaudioC0D0:      Mic=0xe
[   17.872966] input: HDA Intel Front Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.873131] input: HDA Intel Front Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.873253] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   18.172056] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[   18.208399] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8
[   18.208428] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
[   18.221931] Broadcom 43xx driver loaded [ Features: PNLS ]
[   18.243422] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
[   18.243496] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
[   18.243575] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
[   18.243625] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
[   18.243632] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[   18.243636] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
[   18.243639] b43-phy0 ERROR: You must go to [url]https://wireless.wiki.kernel.org/en/users/Drivers/b43#devicefirmware[/url] and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   19.363621] EXT4-fs (sda1): mounted filesystem dde6e24e-f350-4f06-8f21-35215fa2af0d r/w with ordered data mode. Quota mode: none.
[   20.916078] EXT4-fs (sda6): mounted filesystem 50c8a8e2-b9f7-453f-8fe3-d44576578952 r/w with ordered data mode. Quota mode: none.
[   42.828767] usb usb3-port1: disabled by hub (EMI?), re-enabling...
[   42.828790] usb 3-1: USB disconnect, device number 3
[   43.161754] usb 3-1: new low-speed USB device number 4 using uhci_hcd
[   43.347294] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[   43.347309] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   43.347313] usb 3-1: Product:  USB OPTICAL MOUSE
[   43.365036] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0002/input/input14
[   43.367965] hid-generic 0003:15D9:0A4C.0002: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[   47.675034] rfkill: input handler disabled
[  192.819188] rfkill: input handler enabled
[  201.246865] rfkill: input handler disabled
[  204.585151] usb usb3-port1: disabled by hub (EMI?), re-enabling...
[  204.585169] usb 3-1: USB disconnect, device number 4
[  204.925107] usb 3-1: new low-speed USB device number 5 using uhci_hcd
[  205.538537] usb 3-1: device descriptor read/64, error -71
[  205.840343] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[  205.840357] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  205.840362] usb 3-1: Product:  USB OPTICAL MOUSE
[  205.857959] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0003/input/input15
[  205.858196] hid-generic 0003:15D9:0A4C.0003: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[  430.048526] usb 7-2: new high-speed USB device number 6 using ehci-pci
[  430.206890] usb 7-2: New USB device found, idVendor=1bcf, idProduct=0c31, bcdDevice= 1.32
[  430.206908] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  430.206915] usb 7-2: Product: USB to Serial-ATA bridge
[  430.206921] usb 7-2: Manufacturer: Sunplus Innovation Technology 
[  430.206926] usb 7-2: SerialNumber: FF9160821A0000000000005FA2FFFF
[  430.352233] usb-storage 7-2:1.0: USB Mass Storage device detected
[  430.352633] scsi host5: usb-storage 7-2:1.0
[  430.352827] usbcore: registered new interface driver usb-storage
[  430.378113] usbcore: registered new interface driver uas
[  431.363169] scsi 5:0:0:0: Direct-Access     ST916082 1AS              0200 PQ: 0 ANSI: 4
[  431.386590] sd 5:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[  431.393568] sd 5:0:0:0: [sdb] Write Protect is off
[  431.393576] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00
[  431.400573] sd 5:0:0:0: [sdb] No Caching mode page found
[  431.400580] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  431.454963]  sdb: sdb1 sdb2 < sdb5 >
[  431.455601] sd 5:0:0:0: [sdb] Attached SCSI disk
[  487.957000] EXT4-fs (sdb1): warning: checktime reached, running e2fsck is recommended
[  487.959605] EXT4-fs (sdb1): mounted filesystem fccd9248-e76d-43c3-b247-8a4357c0d996 r/w with ordered data mode. Quota mode: none.
[  666.543162] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
[ 1013.283994] perf: interrupt took too long (3137 > 3130), lowering kernel.perf_event_max_sample_rate to 63600
[ 1295.471614] perf: interrupt took too long (3930 > 3921), lowering kernel.perf_event_max_sample_rate to 50700
[ 1658.492640] perf: interrupt took too long (4949 > 4912), lowering kernel.perf_event_max_sample_rate to 40200
[ 4346.239648] usb 3-1: input irq status -75 received
[ 4346.318113] usb usb3-port1: disabled by hub (EMI?), re-enabling...
[ 4346.318133] usb 3-1: USB disconnect, device number 5
[ 4346.681449] usb 3-1: new low-speed USB device number 6 using uhci_hcd
[ 4346.877681] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[ 4346.877699] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4346.877705] usb 3-1: Product:  USB OPTICAL MOUSE
[ 4346.897161] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0004/input/input16
[ 4346.898030] hid-generic 0003:15D9:0A4C.0004: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[ 4350.081548] usb usb3-port1: disabled by hub (EMI?), re-enabling...
[ 4350.081571] usb 3-1: USB disconnect, device number 6
[ 4350.428124] usb 3-1: new low-speed USB device number 7 using uhci_hcd
[ 4350.623687] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[ 4350.623706] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4350.623713] usb 3-1: Product:  USB OPTICAL MOUSE
[ 4350.641347] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0005/input/input17
[ 4350.641670] hid-generic 0003:15D9:0A4C.0005: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[ 4994.588210] usb 3-1: USB disconnect, device number 7
[ 4996.734706] usb 7-1: new high-speed USB device number 7 using ehci-pci
[ 4996.896509] usb 7-1: New USB device found, idVendor=0bda, idProduct=8189, bcdDevice= 2.00
[ 4996.896528] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4996.896535] usb 7-1: Product: RTL8187B_WLAN_Adapter
[ 4996.896541] usb 7-1: Manufacturer: Manufacturer_Realtek
[ 4996.896546] usb 7-1: SerialNumber: 00e04c000001
[ 4997.350930] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 4997.354338] ieee80211 phy1: hwaddr 08:10:74:64:f7:df, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[ 4997.387918] rtl8187: Customer ID is 0x00
[ 4997.388889] rtl8187: wireless switch is on
[ 4997.389023] usbcore: registered new interface driver rtl8187
[ 4997.417091] rtl8187 7-1:1.0 wlp0s29f7u1: renamed from wlan0
[ 5014.473420] wlp0s29f7u1: authenticate with 6e:91:b7:44:b3:b0 (local address=08:10:74:64:f7:df)
[ 5014.473436] wlp0s29f7u1: send auth to 6e:91:b7:44:b3:b0 (try 1/3)
[ 5014.478055] wlp0s29f7u1: authenticated
[ 5014.484602] wlp0s29f7u1: associate with 6e:91:b7:44:b3:b0 (try 1/3)
[ 5014.492124] wlp0s29f7u1: RX AssocResp from 6e:91:b7:44:b3:b0 (capab=0x411 status=0 aid=1)
[ 5014.496530] wlp0s29f7u1: associated
[ 7266.374608] perf: interrupt took too long (6217 > 6186), lowering kernel.perf_event_max_sample_rate to 32100
[ 7908.171394] rfkill: input handler enabled
[ 7914.169026] rfkill: input handler disabled
[ 7938.369627] rfkill: input handler enabled
[ 7942.594927] rfkill: input handler disabled
[ 9496.108967] EXT4-fs (sdb1): unmounting filesystem fccd9248-e76d-43c3-b247-8a4357c0d996.
[ 9509.422176] usb 7-2: USB disconnect, device number 6
[ 9509.720833] usb 7-2: new high-speed USB device number 8 using ehci-pci
[ 9510.134255] usb 7-2: device descriptor read/64, error -71
[ 9519.240930] usb 3-2: new low-speed USB device number 8 using uhci_hcd
[ 9519.430393] usb 3-2: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[ 9519.430418] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9519.430424] usb 3-2: Product:  USB OPTICAL MOUSE
[ 9519.452918] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/0003:15D9:0A4C.0006/input/input18
[ 9519.453314] hid-generic 0003:15D9:0A4C.0006: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
[ 9536.077667] usb usb3-port2: disabled by hub (EMI?), re-enabling...
[ 9536.077706] usb 3-2: USB disconnect, device number 8
[ 9536.394479] usb 3-2: new low-speed USB device number 9 using uhci_hcd
[ 9536.583281] usb 3-2: New USB device found, idVendor=15d9, idProduct=0a4c, bcdDevice= 1.00
[ 9536.583295] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9536.583299] usb 3-2: Product:  USB OPTICAL MOUSE
[ 9536.600850] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/0003:15D9:0A4C.0007/input/input19
[ 9536.601369] hid-generic 0003:15D9:0A4C.0007: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0

Last edited by daidahan (2024-08-28 11:52:42)

daidahan · 2024-08-28 18:23:25

@V1del .
I'm using a different kernel because when I run Pacman -Syu the USB ports are disabled. Another moderator suggested me how to downgrade and it worked again. But when I run Pacman -Syu again the problem repeats itself. Now, this is my partition.

I think if there is a problem with this, it could be that it says /dev/sda1/ and also /dev/sda2/ but /boot is actually on sda1 and / is on sda2. I don't know how to proceed without damaging the current system.

# Static information about the filesystems.
# See fstab(5) for details.

# <file system> <dir> <type> <options> <dump> <pass>
# UUID=dde6e24e-f350-4f06-8f21-35215fa2af0d
/dev/sda1               /               ext4            rw,relatime     0 1

# UUID=dde6e24e-f350-4f06-8f21-35215fa2af0d
/dev/sda1               /boot           ext4            rw,relatime     0 2

# UUID=b27d818a-8bf0-4e8f-8389-b683a66eab5a
/dev/sda2               /               ext4            rw,relatime     0 2

# UUID=50c8a8e2-b9f7-453f-8fe3-d44576578952
/dev/sda6               /home           ext4            rw,relatime     0 2

#3AD2E53DD2E4FDCF
#/dev/sdb1              /mntusb         auto    defaults,uid=daidahan,gid=storage       0 0

Last edited by daidahan (2024-08-28 21:26:16)

Arch Linux

#1 2024-08-15 10:53:42

mouse touchpad and wifi connection via USB device failed after last up

#2 2024-08-15 11:13:50

Re: mouse touchpad and wifi connection via USB device failed after last up

#3 2024-08-15 11:41:55

Re: mouse touchpad and wifi connection via USB device failed after last up

#4 2024-08-15 11:54:34

Re: mouse touchpad and wifi connection via USB device failed after last up

#5 2024-08-15 13:32:51

Re: mouse touchpad and wifi connection via USB device failed after last up

#6 2024-08-15 13:38:05

Re: mouse touchpad and wifi connection via USB device failed after last up

#7 2024-08-15 13:56:44

Re: mouse touchpad and wifi connection via USB device failed after last up

#8 2024-08-15 14:07:01

Re: mouse touchpad and wifi connection via USB device failed after last up

#9 2024-08-15 14:30:44

Re: mouse touchpad and wifi connection via USB device failed after last up

#10 2024-08-15 15:53:07

Re: mouse touchpad and wifi connection via USB device failed after last up

#11 2024-08-16 21:33:35

Re: mouse touchpad and wifi connection via USB device failed after last up

#12 2024-08-17 18:17:08

Re: mouse touchpad and wifi connection via USB device failed after last up

#13 2024-08-17 18:20:28

Re: mouse touchpad and wifi connection via USB device failed after last up

#14 2024-08-17 18:22:49

Re: mouse touchpad and wifi connection via USB device failed after last up

#15 2024-08-20 21:16:08

Re: mouse touchpad and wifi connection via USB device failed after last up

#16 2024-08-24 18:00:22

Re: mouse touchpad and wifi connection via USB device failed after last up

#17 2024-08-26 17:27:40

Re: mouse touchpad and wifi connection via USB device failed after last up

#18 2024-08-28 03:46:13

Re: mouse touchpad and wifi connection via USB device failed after last up

#19 2024-08-28 18:23:25

Re: mouse touchpad and wifi connection via USB device failed after last up

Board footer