You are not logged in.

Pages: 1

#1 2024-08-25 08:12:52

swew
Member
Registered: 2024-08-22
Posts: 3

Pipewire and headset's mic

How to use headset microphone on pipewire? I use regular Sennheiser Cx300S, when connected only built-in microphone from laptop works, microphone sound from headphones is absent, please tell me what to do?
```
pactl list sinks
Sink #53
    State: IDLE
    Name: alsa_output.pci-0000_00_1f.3.analog-stereo
    Description: Built-in Audio Analog Stereo
    Driver: PipeWire
    Sample Specification: s32le 2ch 48000Hz
    Channel Map: front-left,front-right
    Owner Module: 4294967295
    Mute: no
    Volume: front-left: 39322 /  60% / -13.31 dB,   front-right: 39322 /  60% / -13.31 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
    Properties:
        alsa.card = "0"
        alsa.card_name = "HDA Intel PCH"
        alsa.class = "generic"
        alsa.components = "HDA:10ec0255,10431550,00100002"
        alsa.device = "0"
        alsa.driver_name = "snd_hda_intel"
        alsa.id = "PCH"
        alsa.long_card_name = "HDA Intel PCH at 0xef528000 irq 135"
        alsa.mixer_name = "Realtek ALC255"
        alsa.name = "ALC255 Analog"
        alsa.resolution_bits = "16"
        alsa.subclass = "generic-mix"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.sync.id = "00000000:00000000:00000000:00000000"
        api.alsa.card.longname = "HDA Intel PCH at 0xef528000 irq 135"
        api.alsa.card.name = "HDA Intel PCH"
        api.alsa.path = "front:0"
        api.alsa.pcm.card = "0"
        api.alsa.pcm.stream = "playback"
        audio.channels = "2"
        audio.position = "FL,FR"
        card.profile.device = "3"
        device.api = "alsa"
        device.class = "sound"
        device.id = "48"
        device.profile.description = "Analog Stereo"
        device.profile.name = "analog-stereo"
        device.routes = "2"
        factory.name = "api.alsa.pcm.sink"
        media.class = "Audio/Sink"
        device.description = "Built-in Audio"
        node.name = "alsa_output.pci-0000_00_1f.3.analog-stereo"
        node.nick = "ALC255 Analog"
        node.pause-on-idle = "false"
        object.path = "alsa:acp:PCH:3:playback"
        port.group = "playback"
        priority.driver = "1009"
        priority.session = "1009"
        factory.id = "19"
        clock.quantum-limit = "8192"
        client.id = "46"
        node.driver = "true"
        node.loop.name = "data-loop.0"
        library.name = "audioconvert/libspa-audioconvert"
        object.id = "53"
        object.serial = "53"
        node.max-latency = "16384/48000"
        api.alsa.period-size = "1024"
        api.alsa.period-num = "32"
        api.alsa.headroom = "0"
        api.acp.auto-port = "false"
        api.alsa.card = "0"
        api.alsa.use-acp = "true"
        api.dbus.ReserveDevice1 = "Audio0"
        api.dbus.ReserveDevice1.Priority = "-20"
        device.bus = "pci"
        device.bus_path = "pci-0000:00:1f.3"
        device.enum.api = "udev"
        device.form_factor = "internal"
        device.icon_name = "audio-card-analog-pci"
        device.name = "alsa_card.pci-0000_00_1f.3"
        device.nick = "HDA Intel PCH"
        device.plugged.usec = "17475293"
        device.product.id = "0xa171"
        device.product.name = "CM238 HD Audio Controller"
        device.subsystem = "sound"
        sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
        device.vendor.id = "0x8086"
        device.vendor.name = "Intel Corporation"
        device.string = "0"
    Ports:
        analog-output-speaker: Speakers (type: Speaker, priority: 10000, availability group: Legacy 2, not available)
        analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability group: Legacy 3, available)
    Active Port: analog-output-headphones
    Formats:
        pcm

Sink #1746
    State: SUSPENDED
    Name: alsa_output.pci-0000_01_00.1.hdmi-stereo.99
    Description: GP106 High Definition Audio Controller Digital Stereo (HDMI)
    Driver: PipeWire
    Sample Specification: s32le 2ch 48000Hz
    Channel Map: front-left,front-right
    Owner Module: 4294967295
    Mute: no
    Volume: front-left: 26214 /  40% / -23.88 dB,   front-right: 26214 /  40% / -23.88 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-stereo.99.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
    Properties:
        alsa.card = "1"
        alsa.card_name = "HDA NVidia"
        alsa.class = "generic"
        alsa.components = "HDA:10de0084,10de10f1,00100100"
        alsa.device = "3"
        alsa.driver_name = "snd_hda_intel"
        alsa.id = "NVidia"
        alsa.long_card_name = "HDA NVidia at 0xef080000 irq 17"
        alsa.mixer_name = "Nvidia GPU 84 HDMI/DP"
        alsa.name = "LG ULTRAGEAR"
        alsa.resolution_bits = "16"
        alsa.subclass = "generic-mix"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.sync.id = "00000000:00000000:00000000:00000000"
        api.alsa.card.longname = "HDA NVidia at 0xef080000 irq 17"
        api.alsa.card.name = "HDA NVidia"
        api.alsa.path = "hdmi:1"
        api.alsa.pcm.card = "1"
        api.alsa.pcm.stream = "playback"
        audio.channels = "2"
        audio.position = "FL,FR"
        card.profile.device = "4"
        device.api = "alsa"
        device.class = "sound"
        device.id = "122"
        device.profile.description = "Digital Stereo (HDMI)"
        device.profile.name = "hdmi-stereo"
        device.routes = "1"
        factory.name = "api.alsa.pcm.sink"
        media.class = "Audio/Sink"
        device.description = "GP106 High Definition Audio Controller"
        node.name = "alsa_output.pci-0000_01_00.1.hdmi-stereo.99"
        node.nick = "LG ULTRAGEAR"
        node.pause-on-idle = "false"
        object.path = "alsa:acp:NVidia:4:playback"
        port.group = "playback"
        priority.driver = "696"
        priority.session = "696"
        factory.id = "19"
        clock.quantum-limit = "8192"
        client.id = "46"
        node.driver = "true"
        node.loop.name = "data-loop.0"
        library.name = "audioconvert/libspa-audioconvert"
        object.id = "91"
        object.serial = "1746"
        api.acp.auto-port = "false"
        api.alsa.card = "1"
        api.alsa.use-acp = "true"
        api.dbus.ReserveDevice1 = "Audio1"
        api.dbus.ReserveDevice1.Priority = "-20"
        device.bus = "pci"
        device.bus_path = "pci-0000:01:00.1"
        device.enum.api = "udev"
        device.icon_name = "audio-card-analog-pci"
        device.name = "alsa_card.pci-0000_01_00.1"
        device.nick = "HDA NVidia"
        device.plugged.usec = "17129807"
        device.product.id = "0x10f1"
        device.product.name = "GP106 High Definition Audio Controller"
        device.subsystem = "sound"
        sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
        device.vendor.id = "0x10de"
        device.vendor.name = "NVIDIA Corporation"
        device.string = "1"
    Ports:
        hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
    Active Port: hdmi-output-0
    Formats:
        pcm
```

Offline

#2 2024-08-26 16:50:52

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,208

Re: Pipewire and headset's mic

Please use [ code ] [ /code ] tags without the spaces instead of markdown

The more interesting output for a mic would be 

pactl list sources

what's your exact laptop model? Chances are you need to try different HDA models, like dell-headset-multi or so: https://docs.kernel.org/sound/hd-audio/models.html

Which you could test with /etc/modprobe.d/hdaModel.conf 

options snd-hda-intel model=dell-headset-multi

Last edited by V1del (2024-08-27 09:41:46)

Offline

#3 2024-08-29 11:22:52

swew
Member
Registered: 2024-08-22
Posts: 3

Re: Pipewire and headset's mic

Source #53
	State: RUNNING
	Name: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
	Description: Monitor of Built-in Audio Analog Stereo
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_00_1f.3.analog-stereo
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0255,10431550,00100002"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xef528000 irq 137"
		alsa.mixer_name = "Realtek ALC255"
		alsa.name = "ALC255 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA Intel PCH at 0xef528000 irq 137"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "front:0"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "3"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "48"
		device.profile.description = "Analog Stereo"
		device.profile.name = "analog-stereo"
		device.routes = "2"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Built-in Audio"
		node.name = "alsa_output.pci-0000_00_1f.3.analog-stereo"
		node.nick = "ALC255 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:PCH:3:playback"
		port.group = "playback"
		priority.driver = "1009"
		priority.session = "1009"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "53"
		object.serial = "53"
		node.max-latency = "16384/48000"
		api.alsa.period-size = "1024"
		api.alsa.period-num = "32"
		api.alsa.headroom = "0"
		api.acp.auto-port = "false"
		api.alsa.card = "0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1f.3"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "16971310"
		device.product.id = "0xa171"
		device.product.name = "CM238 HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		device.string = "0"
	Ports:
		analog-output-speaker: Speakers (type: Speaker, priority: 10000, availability group: Legacy 2, not available)
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability group: Legacy 3, available)
	Active Port: analog-output-headphones
	Formats:
		pcm

Source #54
	State: SUSPENDED
	Name: alsa_input.pci-0000_00_1f.3.analog-stereo
	Description: Built-in Audio Analog Stereo
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 28775 /  44% / -21.45 dB,   front-right: 28775 /  44% / -21.45 dB
	       balance 0.00
	Base Volume: 6554 /  10% / -60.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0255,10431550,00100002"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xef528000 irq 137"
		alsa.mixer_name = "Realtek ALC255"
		alsa.name = "ALC255 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA Intel PCH at 0xef528000 irq 137"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "front:0"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "capture"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "0"
		device.api = "alsa"
		device.class = "sound"
		device.id = "48"
		device.profile.description = "Analog Stereo"
		device.profile.name = "analog-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.source"
		media.class = "Audio/Source"
		device.description = "Built-in Audio"
		node.name = "alsa_input.pci-0000_00_1f.3.analog-stereo"
		node.nick = "ALC255 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:PCH:0:capture"
		port.group = "capture"
		priority.driver = "2009"
		priority.session = "2009"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "54"
		object.serial = "54"
		api.acp.auto-port = "false"
		api.alsa.card = "0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1f.3"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "16971310"
		device.product.id = "0xa171"
		device.product.name = "CM238 HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		device.string = "0"
	Ports:
		analog-input-mic: Microphone (type: Mic, priority: 8700, availability group: Legacy 1, availability unknown)
	Active Port: analog-input-mic
	Formats:
		pcm

Source #71
	State: SUSPENDED
	Name: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
	Description: Monitor of GP106 High Definition Audio Controller Digital Stereo (HDMI)
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	       balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_01_00.1.hdmi-stereo
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.class = "generic"
		alsa.components = "HDA:10de0084,10de10f1,00100100"
		alsa.device = "3"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "NVidia"
		alsa.long_card_name = "HDA NVidia at 0xef080000 irq 17"
		alsa.mixer_name = "Nvidia GPU 84 HDMI/DP"
		alsa.name = "HDMI 0"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA NVidia at 0xef080000 irq 17"
		api.alsa.card.name = "HDA NVidia"
		api.alsa.path = "hdmi:1"
		api.alsa.pcm.card = "1"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "4"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "47"
		device.profile.description = "Digital Stereo (HDMI)"
		device.profile.name = "hdmi-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "GP106 High Definition Audio Controller"
		node.name = "alsa_output.pci-0000_01_00.1.hdmi-stereo"
		node.nick = "HDMI 0"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:NVidia:4:playback"
		port.group = "playback"
		priority.driver = "696"
		priority.session = "696"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "62"
		object.serial = "71"
		api.acp.auto-port = "false"
		api.alsa.card = "1"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:01:00.1"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_01_00.1"
		device.nick = "HDA NVidia"
		device.plugged.usec = "16627059"
		device.product.id = "0x10f1"
		device.product.name = "GP106 High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.vendor.id = "0x10de"
		device.vendor.name = "NVIDIA Corporation"
		device.string = "1"
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
	Active Port: hdmi-output-0
	Formats:
		pcm

There is no file hdaModel.Conf, laptop model is: GL502VMZ(asus)

Offline

#4 2024-08-29 12:02:03

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,208

Re: Pipewire and headset's mic

I know that file doesn't exist, you're supposed to create it and reboot.

Offline

Pages: 1

Board footer

Powered by FluxBB