Timeshift broke Grub

lexi · 2024-08-29 07:05:58

Hi, I'm new here.

I managed to break my archlinux installation last night. Ran 'pacman -Syu', had sudden problems with a game, and decided to try and use timeshift to revert for the first time. The arch installation guide I used recommended a btrfs with subvolumes /@/ and /@home/, with timeshift. Maybe I didn't quite set it up right. After the rollback reboot grub goes straight to rescue mode. I have a few different OS's installed with different bootloaders, so I hard reset, held delete, and used my bios to use a different grub install to boot to my mint OS on another drive. I mounted the archlinux drive and poked around a bit. The grub.cfg file in that drive's efi partition doesn't look right, I think timeshift may have messed that up. There's nothing in the 10_linux section. I found the pre-rollback snapshot files and tried simply copying them back over the /@/ and /@home/ dirs. Reboot got the grub menu to come up normally for my arch install, but none of the options (not even the original snapshot) boot. The pre-rollback option does at least get part way into booting, but fails to mount /home and dumps me to an arch rescue CLI root login. I looked into journalctl and looked back through the log of when I first tried to rollback, and found a line during post-rollback boot that raised my eyebrows; "Unknown kernel command line parameters "BOOT_IMAGE=/@/boot/vmlinuz-linux", will be passed to user space."

I don't really know what I'm doing, if that's not obvious. I know enough to be dangerous, but I'm still learning and I'm getting tired of not asking for help.

What do I need to provide to the gurus around here to help them help me? I can also boot to an archlinux iso and arch-chroot into the problem drive, if you need me to run some commands and give the outputs. If you can point me to where the journal saves it's log file, I can just pull it up in mint and copy relevant time frames here to the forum.

I'm sure the archlinux help process is a bit different than it is in the mint community, but here's mint's system report so you can at least see my hardware. Obviously the System section is not relevant. arch is installed on /dev/sdb2 and it's efi partition is /dev/sdb1. I've got mint on nvme0n1p4 (ext4), Win11 on nvme0n1p3, they share an efi partition on nvme0n1p1, and mint uses a swap partition nvme0n1p5. There's also a data HDD. The arch live ISO is setup in the mint copy of grub to boot from a folder within the nvme0n1p4 partition.

System:
  Kernel: 6.8.0-40-generic x86_64 bits: 64 compiler: N/A Desktop: Cinnamon 6.0.4 tk: GTK 3.24.33
    wm: muffin vt: 7 dm: GDM3 42.0, LightDM 1.30.0 Distro: Linux Mint 21.3 Virginia
    base: Ubuntu 22.04 jammy
Machine:
  Type: Desktop System: ASUSTeK product: ROG Strix G15CS v: 1.0 serial: <superuser required>
  Mobo: ASUSTeK model: G15CS v: 1.0 serial: <superuser required> UEFI: American Megatrends
    v: G15CS.304 date: 08/18/2020
Battery:
  ID-1: hidpp_battery_0 charge: 100% condition: N/A volts: 4.2 min: N/A
    model: Logitech G502 LIGHTSPEED Wireless Gaming Mouse type: N/A serial: <filter> status: Full
  ID-2: hidpp_battery_1 charge: 100% condition: N/A volts: 4.1 min: N/A
    model: Logitech G935 Gaming Headset type: N/A serial: <filter> status: Full
CPU:
  Info: 8-core model: Intel Core i7-9700F bits: 64 type: MCP smt: <unsupported> arch: Coffee Lake
    rev: D cache: L1: 512 KiB L2: 2 MiB L3: 12 MiB
  Speed (MHz): avg: 4501 high: 4511 min/max: 800/4700 cores: 1: 4499 2: 4499 3: 4505 4: 4500
    5: 4498 6: 4511 7: 4502 8: 4500 bogomips: 48000
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: NVIDIA TU104 [GeForce RTX 2070 SUPER] vendor: ASUSTeK driver: nvidia v: 535.183.01
    pcie: speed: 2.5 GT/s lanes: 16 ports: active: none off: HDMI-A-1 empty: DP-1,DP-2,DP-3
    bus-ID: 01:00.0 chip-ID: 10de:1e84 class-ID: 0300
  Device-2: Logitech StreamCam type: USB driver: hid-generic,snd-usb-audio,usbhid,uvcvideo
    bus-ID: 1-3:3 chip-ID: 046d:0893 class-ID: 0300 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: modesetting,nouveau,nvidia
    unloaded: fbdev,vesa gpu: nvidia display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23")
  Monitor-1: HDMI-0 res: 1920x1080 hz: 60 dpi: 103 size: 474x296mm (18.7x11.7")
    diag: 559mm (22")
  OpenGL: renderer: NVIDIA GeForce RTX 2070 SUPER/PCIe/SSE2 v: 4.6.0 NVIDIA 535.183.01
    direct render: Yes
Audio:
  Device-1: Intel Cannon Lake PCH cAVS vendor: ASUSTeK driver: snd_hda_intel v: kernel
    bus-ID: 00:1f.3 chip-ID: 8086:a348 class-ID: 0403
  Device-2: NVIDIA TU104 HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie:
    speed: 8 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:10f8 class-ID: 0403
  Device-3: Logitech StreamCam type: USB driver: hid-generic,snd-usb-audio,usbhid,uvcvideo
    bus-ID: 1-3:3 chip-ID: 046d:0893 class-ID: 0300 serial: <filter>
  Device-4: Logitech G935 Gaming Headset type: USB
    driver: logitech-hidpp-device,snd-usb-audio,usbhid bus-ID: 1-6.3:10 chip-ID: 046d:0a87
    class-ID: 0300
  Sound Server-1: ALSA v: k6.8.0-40-generic running: yes
  Sound Server-2: sndio v: N/A running: yes
  Sound Server-3: JACK v: 1.9.20 running: no
  Sound Server-4: PulseAudio v: 15.99.1 running: yes
  Sound Server-5: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Intel Cannon Lake PCH CNVi WiFi driver: iwlwifi
    v: iwlwifi-stack-public:master:11510:0106cce5 bus-ID: 00:14.3 chip-ID: 8086:a370 class-ID: 0280
  IF: wlo1 state: up mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK driver: r8169
    v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: eno2 state: down mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB driver: btusb v: 0.8
    bus-ID: 1-14:12 chip-ID: 8087:0aaa class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 4 state: up address: <filter> bt-v: 3.0 lmp-v: 5.1
    sub-v: 100 hci-v: 5.1 rev: 100
Drives:
  Local Storage: total: 1.83 TiB used: 545.64 GiB (29.1%)
  ID-1: /dev/nvme0n1 vendor: Intel model: SSDPEKNW512G8 size: 476.94 GiB speed: 31.6 Gb/s
    lanes: 4 type: SSD serial: <filter> rev: 002C temp: 28.9 C scheme: GPT
  ID-2: /dev/sda vendor: Toshiba model: DT01ACA100 size: 931.51 GiB speed: 6.0 Gb/s type: HDD
    rpm: 7200 serial: <filter> rev: A8S0 scheme: GPT
  ID-3: /dev/sdb type: USB vendor: PNY model: CS90 0 500GB SSD size: 465.76 GiB type: SSD
    serial: <filter> rev: 4101 scheme: GPT
Partition:
  ID-1: / size: 291.14 GiB used: 126.32 GiB (43.4%) fs: ext4 dev: /dev/nvme0n1p4
  ID-2: /boot/efi size: 256 MiB used: 244.3 MiB (95.4%) fs: vfat dev: /dev/nvme0n1p1
Swap:
  ID-1: swap-1 type: partition size: 29.8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p5
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 16 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-1:2 info: Logitech G910 Orion Spectrum Mechanical Keyboard type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 500mA chip-ID: 046d:c335
    class-ID: 0300 serial: <filter>
  Device-2: 1-3:3 info: Logitech StreamCam type: Video,Audio,HID
    driver: hid-generic,snd-usb-audio,usbhid,uvcvideo interfaces: 6 rev: 2.1 speed: 480 Mb/s
    power: 500mA chip-ID: 046d:0893 class-ID: 0300 serial: <filter>
  Hub-2: 1-6:4 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA
    chip-ID: 1a40:0101 class-ID: 0900
  Device-1: 1-6.1:6 info: Logitech G502 LIGHTSPEED Wireless Gaming Mouse
    type: Mouse,Keyboard,HID driver: logitech-hidpp-device,usbhid interfaces: 3 rev: 2.0
    speed: 12 Mb/s power: 498mA chip-ID: 046d:c08d class-ID: 0300 serial: <filter>
  Device-2: 1-6.2:8 info: Valve Wireless Steam Controller type: Keyboard,HID
    driver: hid-steam,usbhid interfaces: 5 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 28de:1142
    class-ID: 0300
  Device-3: 1-6.3:10 info: Logitech G935 Gaming Headset type: Audio,HID
    driver: logitech-hidpp-device,snd-usb-audio,usbhid interfaces: 4 rev: 1.1 speed: 12 Mb/s
    power: 100mA chip-ID: 046d:0a87 class-ID: 0300
  Device-4: 1-6.4:11 info: Logitech G935 Gaming Headset Battery Charger type: HID
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 500mA chip-ID: 046d:0a88
    class-ID: 0300
  Device-5: 1-9:5 info: Logitech G502 SE HERO Gaming Mouse type: Mouse,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 300mA chip-ID: 046d:c08b
    class-ID: 0300 serial: <filter>
  Device-6: 1-10:7 info: ASUSTek ITE Device(8910) type: Keyboard driver: usbhid interfaces: 1
    rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 0b05:1866 class-ID: 0301
  Device-7: 1-14:12 info: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: Bluetooth
    driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0aaa
    class-ID: e001
  Hub-3: 2-0:1 info: Super-speed hub ports: 6 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-3:2 info: Other World External SATA Hard Drive Adapter cable PA023U3
    type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA
    chip-ID: 7825:a2a4 class-ID: 0806 serial: <filter>
  Hub-4: 3-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-5: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 38.4 C pch: 49.0 C mobo: N/A gpu: nvidia temp: 36 C
  Fan Speeds (RPM): cpu: 1500 gpu: nvidia fan: 20%
Repos:
  Packages: 8843 apt: 8808 flatpak: 35
  No active apt repos in: /etc/apt/sources.list
  No active apt repos in: /etc/apt/sources.list.d/additional-repositories.list
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
    1: deb http: //packages.linuxmint.com virginia main upstream import backport
    2: deb http: //ubuntu.mirrors.pair.com/archive jammy main restricted universe multiverse
    3: deb http: //ubuntu.mirrors.pair.com/archive jammy-updates main restricted universe multiverse
    4: deb http: //ubuntu.mirrors.pair.com/archive jammy-backports main restricted universe multiverse
    5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
  Active apt repos in: /etc/apt/sources.list.d/slgobinath-gcalendar-jammy.list
    1: deb [signed-by=/etc/apt/keyrings/slgobinath-gcalendar-jammy.gpg] https: //ppa.launchpadcontent.net/slgobinath/gcalendar/ubuntu jammy main
    2: deb-src [signed-by=/etc/apt/keyrings/slgobinath-gcalendar-jammy.gpg] https: //ppa.launchpadcontent.net/slgobinath/gcalendar/ubuntu jammy main
Info:
  Processes: 482 Uptime: 1h 14m wakeups: 4 Memory: 31.27 GiB used: 5.1 GiB (16.3%) Init: systemd
  v: 249 runlevel: 5 Compilers: gcc: 11.4.0 alt: 11/12 clang: 14.0.0-1ubuntu1.1
  Client: Unknown python3.10 client inxi: 3.3.13

Thanks in advance! Sorry for any headache. I'll be back to check on this post in about 11 hours. I have to sleep and work a half shift before I can come back to this issue.

lexi · 2024-08-29 16:44:48

Found the issue with reverting the Timeshift rollback. The sub volume id's didn't get changed in /@/etc/fstab when Timeshift did all of it's copying, but running 'btrfs subvolume list -o /' showed the old ID's were now associated with copies in the /timeshift-btrfs/snapshots/(date) directory, and the root /@ and /@home sub volumes had changed to something else. Now that I've managed to restore to pre-rollback status, I plan to run grub-install and grub-mkconfig to make sure that's all straight, then pacman -Syu to see if anything's been fixed with the frame rate issue at the title screen in Kerbal Space Program that started all of this.

-update:

[lexi@arch ~]$ sudo grub-install
Installing for x86_64-efi platform.
grub-install: error: cannot find EFI directory.
[lexi@arch ~]$ sudo pacman -Syu grub
:: Synchronizing package databases...
error: failed to synchronize all databases (unable to lock database)
[lexi@arch ~]$

Last edited by lexi (2024-08-29 16:53:50)

ewaller · 2024-08-29 21:30:36

It has been pointed out that whatever guide you used was certainly not the officially supported. https://wiki.archlinux.org/title/Installation_guide
As such, we are going to be a bit limited in what we can do to support you. Do you still have problems with your install? Have you contacted the publisher of the guide you used?
Also, This does not really meet the criteria for 'System Administration'. I am going to move it to Newbie Corner without prejudice.

lexi · 2024-08-29 22:04:56

Guide used is at this GitHub link

https://gist.github.com/mjkstra/96ce7a5 … 2cdc169bae

I have not contacted the guide author. I did repair grub ok, and my pacman databases. Things seem to be working all normally now, except audio will only play from the headset, not the built-in device.

lexi · 2024-08-30 19:09:26

I have identified another issue I believe is related to this post, and haven't found a solution to it yet.

Audio plays through my USB/wireless headset, but not through the speakers plugged into a 3.5mm jack (integrated sound on ASUS MOBO). Here's the info center report of my audio devices;

Module #1
	Name: libpipewire-module-rt
	Argument: {
            nice.level    = -11
            rt.prio       = 88
            #rt.time.soft = -1
            #rt.time.hard = -1
            #uclamp.min = 0
            #uclamp.max = 1024
        }
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-rt"
		object.id = "1"
		object.serial = "1"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Use realtime thread scheduling, falling back to RTKit"
		module.usage = "( nice.level=<priority: default 20(don't change)> ) ( rt.prio=<priority: default 83> ) ( rt.time.soft=<in usec: default -1> ) ( rt.time.hard=<in usec: default -1> ) ( rlimits.enabled=<default true> ) ( rtportal.enabled=<default true> ) ( rtkit.enabled=<default true> ) ( uclamp.min=<default 0> ) ( uclamp.max=<default 1024> )"
		module.version = "1.2.3"
		nice.level = "-11"
		rt.prio = "88"

Module #2
	Name: libpipewire-module-protocol-native
	Argument: {
            # List of server Unix sockets, and optionally permissions
            #sockets = [ { name = "pipewire-0" }, { name = "pipewire-0-manager" } ]
        }
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-protocol-native"
		object.id = "2"
		object.serial = "2"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Native protocol using unix sockets"
		module.version = "1.2.3"

Module #4
	Name: libpipewire-module-profiler
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-profiler"
		object.id = "4"
		object.serial = "4"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Generate Profiling data"
		module.version = "1.2.3"

Module #6
	Name: libpipewire-module-metadata
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-metadata"
		object.id = "6"
		object.serial = "6"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create metadata store"
		module.version = "1.2.3"

Module #8
	Name: libpipewire-module-spa-device-factory
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-spa-device-factory"
		object.id = "8"
		object.serial = "8"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Provide a factory to make SPA devices"
		module.version = "1.2.3"

Module #10
	Name: libpipewire-module-spa-node-factory
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-spa-node-factory"
		object.id = "10"
		object.serial = "10"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Provide a factory to make SPA nodes"
		module.version = "1.2.3"

Module #12
	Name: libpipewire-module-client-node
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-client-node"
		object.id = "12"
		object.serial = "12"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create and control remote nodes"
		module.version = "1.2.3"

Module #14
	Name: libpipewire-module-client-device
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-client-device"
		object.id = "14"
		object.serial = "14"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create and control remote devices"
		module.version = "1.2.3"

Module #16
	Name: libpipewire-module-portal
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-portal"
		object.id = "16"
		object.serial = "16"

Module #17
	Name: libpipewire-module-access
	Argument: {
            # Socket-specific access permissions
            #access.socket = { pipewire-0 = "default", pipewire-0-manager = "unrestricted" }

            # Deprecated legacy mode (not socket-based),
            # for now enabled by default if access.socket is not specified
            #access.legacy = true
        }
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-access"
		object.id = "17"
		object.serial = "17"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Perform access check"
		module.usage = "( access.socket={ <socket>=<access>, ... } ) ( access.legacy=true ) "
		module.version = "1.2.3"

Module #18
	Name: libpipewire-module-adapter
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-adapter"
		object.id = "18"
		object.serial = "18"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Manage adapter nodes"
		module.version = "1.2.3"

Module #20
	Name: libpipewire-module-link-factory
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-link-factory"
		object.id = "20"
		object.serial = "20"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create links"
		module.usage = "( allow.link.passive=<bool, default false> ) "
		module.version = "1.2.3"

Module #22
	Name: libpipewire-module-session-manager
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-session-manager"
		object.id = "22"
		object.serial = "22"
		module.author = "George Kiagiadakis <george.kiagiadakis@collabora.com>"
		module.description = "Implements objects for session management"
		module.version = "1.2.3"

Module #536870912
	Name: module-always-sink
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Pauli Virtanen <pav@iki.fi>"
		module.description = "Always keeps at least one sink loaded even if it's a null one"
		module.usage = "sink_name=<name of sink>"
		module.version = "1.2.3"

Module #536870913
	Name: module-device-manager
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Keep track of devices (and their descriptions) both past and present and prioritise by role"
		module.usage = "do_routing=<Automatically route streams based on a priority list (unique per-role)?> on_hotplug=<When new device becomes available, recheck streams?> on_rescue=<When device becomes unavailable, recheck streams?>"
		module.version = "1.2.3"

Module #536870914
	Name: module-device-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Automatically restore the volume/mute state of devices"
		module.usage = "restore_port=<Save/restore port?> restore_volume=<Save/restore volumes?> restore_muted=<Save/restore muted states?> restore_formats=<Save/restore saved formats?>"
		module.version = "1.2.3"

Module #536870915
	Name: module-stream-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.usage = "restore_device=<Save/restore sinks/sources?> restore_volume=<Save/restore volumes?> restore_muted=<Save/restore muted states?> on_hotplug=<This argument is obsolete, please remove it from configuration> on_rescue=<This argument is obsolete, please remove it from configuration> fallback_table=<filename>"
		module.version = "1.2.3"

Sink #61
	State: SUSPENDED
	Name: alsa_output.usb-Logitech_G935_Gaming_Headset-00.pro-output-0
	Description: G935 Gaming Headset Pro
	Driver: PipeWire
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: aux0,aux1
	Owner Module: 4294967295
	Mute: no
	Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.usb-Logitech_G935_Gaming_Headset-00.pro-output-0.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "3"
		alsa.card_name = "G935 Gaming Headset"
		alsa.class = "generic"
		alsa.components = "USB046d:0a87"
		alsa.device = "0"
		alsa.driver_name = "snd_usb_audio"
		alsa.id = "Headset"
		alsa.long_card_name = "Logitech G935 Gaming Headset at usb-0000:00:14.0-6.3, full speed"
		alsa.mixer_name = "USB Mixer"
		alsa.name = "USB Audio"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.auto-link = "true"
		api.alsa.card.longname = "Logitech G935 Gaming Headset at usb-0000:00:14.0-6.3, full speed"
		api.alsa.card.name = "G935 Gaming Headset"
		api.alsa.disable-tsched = "true"
		api.alsa.path = "hw:3,0"
		api.alsa.pcm.card = "3"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "AUX0,AUX1"
		card.profile.device = "0"
		clock.name = "api.alsa.3"
		device.api = "alsa"
		device.class = "sound"
		device.id = "51"
		device.profile.description = "Pro"
		device.profile.name = "pro-output-0"
		device.profile.pro = "true"
		device.routes = "0"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "G935 Gaming Headset"
		node.group = "pro-audio-3"
		node.link-group = "pro-audio-3"
		node.name = "alsa_output.usb-Logitech_G935_Gaming_Headset-00.pro-output-0"
		node.nick = "G935 Gaming Headset"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Headset:0:playback"
		port.group = "playback"
		priority.driver = "1500"
		priority.session = "1500"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "47"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "61"
		object.serial = "61"
		node.driver-id = "62"
		api.acp.auto-port = "false"
		api.alsa.card = "3"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio3"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "usb"
		device.bus-id = "usb-Logitech_G935_Gaming_Headset-00"
		device.bus_path = "pci-0000:00:14.0-usb-0:6.3:1.0"
		device.enum.api = "udev"
		device.form_factor = "headset"
		device.icon_name = "audio-headset-analog-usb"
		device.name = "alsa_card.usb-Logitech_G935_Gaming_Headset-00"
		device.nick = "G935 Gaming Headset"
		device.plugged.usec = "4535857"
		device.product.id = "0x0a87"
		device.product.name = "G935 Gaming Headset"
		device.serial = "Logitech_G935_Gaming_Headset"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.0/sound/card3"
		device.vendor.id = "0x046d"
		device.vendor.name = "Logitech, Inc."
		device.string = "3"
	Formats:
		pcm

Sink #222
	State: RUNNING
	Name: alsa_output.pci-0000_00_1f.3.pro-output-0
	Description: Built-in Audio Pro
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: aux0,aux1
	Owner Module: 4294967295
	Mute: no
	Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_00_1f.3.pro-output-0.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0887,10432360,00100302"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa4410000 irq 146"
		alsa.mixer_name = "Realtek ALC887-VD"
		alsa.name = "ALC887-VD Analog"
		alsa.resolution_bits = "32"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA Intel PCH at 0xa4410000 irq 146"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "hw:0,0"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "AUX0,AUX1"
		card.profile.device = "0"
		clock.name = "api.alsa.0"
		device.api = "alsa"
		device.class = "sound"
		device.id = "52"
		device.profile.description = "Pro"
		device.profile.name = "pro-output-0"
		device.profile.pro = "true"
		device.routes = "0"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Built-in Audio"
		node.name = "alsa_output.pci-0000_00_1f.3.pro-output-0"
		node.nick = "ALC887-VD Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:PCH:0:playback"
		port.group = "playback"
		priority.driver = "1500"
		priority.session = "1500"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "47"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "43"
		object.serial = "222"
		node.max-latency = "16384/48000"
		api.alsa.period-size = "1024"
		api.alsa.period-num = "32"
		api.alsa.headroom = "0"
		api.acp.auto-port = "false"
		api.alsa.card = "0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1f.3"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "3935746"
		device.product.id = "0xa348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		device.string = "0"
	Formats:
		pcm

Source #61
	State: SUSPENDED
	Name: alsa_output.usb-Logitech_G935_Gaming_Headset-00.pro-output-0.monitor
	Description: Monitor of G935 Gaming Headset Pro
	Driver: PipeWire
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: aux0,aux1
	Owner Module: 4294967295
	Mute: no
	Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.usb-Logitech_G935_Gaming_Headset-00.pro-output-0
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "3"
		alsa.card_name = "G935 Gaming Headset"
		alsa.class = "generic"
		alsa.components = "USB046d:0a87"
		alsa.device = "0"
		alsa.driver_name = "snd_usb_audio"
		alsa.id = "Headset"
		alsa.long_card_name = "Logitech G935 Gaming Headset at usb-0000:00:14.0-6.3, full speed"
		alsa.mixer_name = "USB Mixer"
		alsa.name = "USB Audio"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.auto-link = "true"
		api.alsa.card.longname = "Logitech G935 Gaming Headset at usb-0000:00:14.0-6.3, full speed"
		api.alsa.card.name = "G935 Gaming Headset"
		api.alsa.disable-tsched = "true"
		api.alsa.path = "hw:3,0"
		api.alsa.pcm.card = "3"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "AUX0,AUX1"
		card.profile.device = "0"
		clock.name = "api.alsa.3"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "51"
		device.profile.description = "Pro"
		device.profile.name = "pro-output-0"
		device.profile.pro = "true"
		device.routes = "0"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "G935 Gaming Headset"
		node.group = "pro-audio-3"
		node.link-group = "pro-audio-3"
		node.name = "alsa_output.usb-Logitech_G935_Gaming_Headset-00.pro-output-0"
		node.nick = "G935 Gaming Headset"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Headset:0:playback"
		port.group = "playback"
		priority.driver = "1500"
		priority.session = "1500"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "47"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "61"
		object.serial = "61"
		node.driver-id = "62"
		api.acp.auto-port = "false"
		api.alsa.card = "3"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio3"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "usb"
		device.bus-id = "usb-Logitech_G935_Gaming_Headset-00"
		device.bus_path = "pci-0000:00:14.0-usb-0:6.3:1.0"
		device.enum.api = "udev"
		device.form_factor = "headset"
		device.icon_name = "audio-headset-analog-usb"
		device.name = "alsa_card.usb-Logitech_G935_Gaming_Headset-00"
		device.nick = "G935 Gaming Headset"
		device.plugged.usec = "4535857"
		device.product.id = "0x0a87"
		device.product.name = "G935 Gaming Headset"
		device.serial = "Logitech_G935_Gaming_Headset"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.0/sound/card3"
		device.vendor.id = "0x046d"
		device.vendor.name = "Logitech, Inc."
		device.string = "3"
	Formats:
		pcm

Source #62
	State: SUSPENDED
	Name: alsa_input.usb-Logitech_G935_Gaming_Headset-00.pro-input-0
	Description: G935 Gaming Headset Pro
	Driver: PipeWire
	Sample Specification: s16le 1ch 48000Hz
	Channel Map: aux0
	Owner Module: 4294967295
	Mute: no
	Volume: aux0: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "3"
		alsa.card_name = "G935 Gaming Headset"
		alsa.class = "generic"
		alsa.components = "USB046d:0a87"
		alsa.device = "0"
		alsa.driver_name = "snd_usb_audio"
		alsa.id = "Headset"
		alsa.long_card_name = "Logitech G935 Gaming Headset at usb-0000:00:14.0-6.3, full speed"
		alsa.mixer_name = "USB Mixer"
		alsa.name = "USB Audio"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.auto-link = "true"
		api.alsa.card.longname = "Logitech G935 Gaming Headset at usb-0000:00:14.0-6.3, full speed"
		api.alsa.card.name = "G935 Gaming Headset"
		api.alsa.disable-tsched = "true"
		api.alsa.path = "hw:3,0"
		api.alsa.pcm.card = "3"
		api.alsa.pcm.stream = "capture"
		audio.channels = "1"
		audio.position = "AUX0"
		card.profile.device = "1"
		clock.name = "api.alsa.3"
		device.api = "alsa"
		device.class = "sound"
		device.id = "51"
		device.profile.description = "Pro"
		device.profile.name = "pro-input-0"
		device.profile.pro = "true"
		device.routes = "0"
		factory.name = "api.alsa.pcm.source"
		media.class = "Audio/Source"
		device.description = "G935 Gaming Headset"
		node.group = "pro-audio-3"
		node.link-group = "pro-audio-3"
		node.name = "alsa_input.usb-Logitech_G935_Gaming_Headset-00.pro-input-0"
		node.nick = "G935 Gaming Headset"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Headset:1:capture"
		port.group = "capture"
		priority.driver = "2500"
		priority.session = "2500"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "47"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "62"
		object.serial = "62"
		api.acp.auto-port = "false"
		api.alsa.card = "3"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio3"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "usb"
		device.bus-id = "usb-Logitech_G935_Gaming_Headset-00"
		device.bus_path = "pci-0000:00:14.0-usb-0:6.3:1.0"
		device.enum.api = "udev"
		device.form_factor = "headset"
		device.icon_name = "audio-headset-analog-usb"
		device.name = "alsa_card.usb-Logitech_G935_Gaming_Headset-00"
		device.nick = "G935 Gaming Headset"
		device.plugged.usec = "4535857"
		device.product.id = "0x0a87"
		device.product.name = "G935 Gaming Headset"
		device.serial = "Logitech_G935_Gaming_Headset"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.0/sound/card3"
		device.vendor.id = "0x046d"
		device.vendor.name = "Logitech, Inc."
		device.string = "3"
	Formats:
		pcm

Source #222
	State: RUNNING
	Name: alsa_output.pci-0000_00_1f.3.pro-output-0.monitor
	Description: Monitor of Built-in Audio Pro
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: aux0,aux1
	Owner Module: 4294967295
	Mute: no
	Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_00_1f.3.pro-output-0
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0887,10432360,00100302"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa4410000 irq 146"
		alsa.mixer_name = "Realtek ALC887-VD"
		alsa.name = "ALC887-VD Analog"
		alsa.resolution_bits = "32"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA Intel PCH at 0xa4410000 irq 146"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "hw:0,0"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "AUX0,AUX1"
		card.profile.device = "0"
		clock.name = "api.alsa.0"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "52"
		device.profile.description = "Pro"
		device.profile.name = "pro-output-0"
		device.profile.pro = "true"
		device.routes = "0"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Built-in Audio"
		node.name = "alsa_output.pci-0000_00_1f.3.pro-output-0"
		node.nick = "ALC887-VD Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:PCH:0:playback"
		port.group = "playback"
		priority.driver = "1500"
		priority.session = "1500"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "47"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "43"
		object.serial = "222"
		node.max-latency = "16384/48000"
		api.alsa.period-size = "1024"
		api.alsa.period-num = "32"
		api.alsa.headroom = "0"
		api.acp.auto-port = "false"
		api.alsa.card = "0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1f.3"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "3935746"
		device.product.id = "0xa348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		device.string = "0"
	Formats:
		pcm

Source #223
	State: SUSPENDED
	Name: alsa_input.pci-0000_00_1f.3.pro-input-0
	Description: Built-in Audio Pro
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: aux0,aux1
	Owner Module: 4294967295
	Mute: no
	Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0887,10432360,00100302"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa4410000 irq 146"
		alsa.mixer_name = "Realtek ALC887-VD"
		alsa.name = "ALC887-VD Analog"
		alsa.resolution_bits = "32"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA Intel PCH at 0xa4410000 irq 146"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "hw:0,0"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "capture"
		audio.channels = "2"
		audio.position = "AUX0,AUX1"
		card.profile.device = "1"
		clock.name = "api.alsa.0"
		device.api = "alsa"
		device.class = "sound"
		device.id = "52"
		device.profile.description = "Pro"
		device.profile.name = "pro-input-0"
		device.profile.pro = "true"
		device.routes = "0"
		factory.name = "api.alsa.pcm.source"
		media.class = "Audio/Source"
		device.description = "Built-in Audio"
		node.name = "alsa_input.pci-0000_00_1f.3.pro-input-0"
		node.nick = "ALC887-VD Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:PCH:1:capture"
		port.group = "capture"
		priority.driver = "2500"
		priority.session = "2500"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "47"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "56"
		object.serial = "223"
		api.acp.auto-port = "false"
		api.alsa.card = "0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1f.3"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "3935746"
		device.product.id = "0xa348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		device.string = "0"
	Formats:
		pcm

Source #224
	State: SUSPENDED
	Name: alsa_input.pci-0000_00_1f.3.pro-input-2
	Description: Built-in Audio Pro 2
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: aux0,aux1
	Owner Module: 4294967295
	Mute: no
	Volume: aux0: 65532 / 100% / -0.00 dB,   aux1: 65532 / 100% / -0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0887,10432360,00100302"
		alsa.device = "2"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa4410000 irq 146"
		alsa.mixer_name = "Realtek ALC887-VD"
		alsa.name = "ALC887-VD Alt Analog"
		alsa.resolution_bits = "32"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA Intel PCH at 0xa4410000 irq 146"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "hw:0,2"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "capture"
		audio.channels = "2"
		audio.position = "AUX0,AUX1"
		card.profile.device = "2"
		clock.name = "api.alsa.0"
		device.api = "alsa"
		device.class = "sound"
		device.id = "52"
		device.profile.description = "Pro 2"
		device.profile.name = "pro-input-2"
		device.profile.pro = "true"
		device.routes = "0"
		factory.name = "api.alsa.pcm.source"
		media.class = "Audio/Source"
		device.description = "Built-in Audio"
		node.name = "alsa_input.pci-0000_00_1f.3.pro-input-2"
		node.nick = "ALC887-VD Alt Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:PCH:2:capture"
		port.group = "capture"
		priority.driver = "2212"
		priority.session = "2212"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "47"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "82"
		object.serial = "224"
		api.acp.auto-port = "false"
		api.alsa.card = "0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1f.3"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "3935746"
		device.product.id = "0xa348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		device.string = "0"
	Formats:
		pcm

Sink Input #211
	Driver: PipeWire
	Owner Module: n/a
	Client: 91
	Sink: 222
	Sample Specification: float32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "48000"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: yes
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Buffer Latency: 0 usec
	Sink Latency: 0 usec
	Resample method: PipeWire
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Firefox"
		application.process.id = "1736"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "firefox"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		media.name = "AudioStream"
		node.rate = "1/48000"
		node.latency = "3600/48000"
		stream.is-live = "true"
		node.name = "Firefox"
		node.want-driver = "true"
		node.autoconnect = "true"
		media.class = "Stream/Output/Audio"
		port.group = "stream.0"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "7"
		clock.quantum-limit = "8192"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "81"
		object.id = "116"
		object.serial = "211"
		pulse.attr.maxlength = "4194304"
		pulse.attr.tlength = "48000"
		pulse.attr.prebuf = "38408"
		pulse.attr.minreq = "9600"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"

Sink Input #2090
	Driver: PipeWire
	Owner Module: n/a
	Client: 91
	Sink: 222
	Sample Specification: float32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "48000"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: yes
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Buffer Latency: 0 usec
	Sink Latency: 0 usec
	Resample method: PipeWire
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Firefox"
		application.process.id = "1736"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "firefox"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		media.name = "AudioStream"
		node.rate = "1/48000"
		node.latency = "3600/48000"
		stream.is-live = "true"
		node.name = "Firefox"
		node.want-driver = "true"
		node.autoconnect = "true"
		media.class = "Stream/Output/Audio"
		port.group = "stream.0"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "7"
		clock.quantum-limit = "8192"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "81"
		object.id = "97"
		object.serial = "2090"
		pulse.attr.maxlength = "4194304"
		pulse.attr.tlength = "48000"
		pulse.attr.prebuf = "38408"
		pulse.attr.minreq = "9600"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"

Sink Input #4331
	Driver: PipeWire
	Owner Module: n/a
	Client: 91
	Sink: 222
	Sample Specification: float32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "48000"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: no
	Mute: no
	Volume: front-left: 37604 /  57% / -14.47 dB,   front-right: 37604 /  57% / -14.47 dB
	        balance 0.00
	Buffer Latency: 0 usec
	Sink Latency: 0 usec
	Resample method: PipeWire
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Firefox"
		application.process.id = "1736"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "firefox"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		media.name = "Who's That Chick? (feat. Rihanna) - YouTube Music"
		node.rate = "1/48000"
		node.latency = "3600/48000"
		stream.is-live = "true"
		node.name = "Firefox"
		node.want-driver = "true"
		node.autoconnect = "true"
		media.class = "Stream/Output/Audio"
		port.group = "stream.0"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "7"
		clock.quantum-limit = "8192"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "81"
		object.id = "155"
		object.serial = "4331"
		pulse.attr.maxlength = "4194304"
		pulse.attr.tlength = "48000"
		pulse.attr.prebuf = "38408"
		pulse.attr.minreq = "9600"
		node.driver-id = "43"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"

Source Output #102
	Driver: PipeWire
	Owner Module: n/a
	Client: 90
	Source: 4294967295
	Sample Specification: float32le 1ch 25Hz
	Channel Map: mono
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
	Corked: yes
	Mute: no
	Volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	Buffer Latency: 0 usec
	Source Latency: 0 usec
	Resample method: PipeWire
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = ""
		application.id = "org.kde.plasma-pa"
		application.icon_name = ""
		application.process.id = "1501"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "plasmashell"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		media.name = "PlasmaPA-VolumeMeter"
		node.rate = "1/25"
		node.latency = "1/25"
		stream.monitor = "true"
		target.object = "97"
		stream.is-live = "true"
		node.name = ""
		node.want-driver = "true"
		node.autoconnect = "true"
		node.dont-reconnect = "true"
		media.class = "Stream/Input/Audio"
		resample.peaks = "true"
		channelmix.normalize = "true"
		port.ignore-latency = "true"
		port.group = "stream.0"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "7"
		clock.quantum-limit = "8192"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "80"
		object.id = "87"
		object.serial = "102"
		module-stream-restore.id = "source-output-by-application-id:org.kde.plasma-pa"

Source Output #4271
	Driver: PipeWire
	Owner Module: n/a
	Client: 90
	Source: 4294967295
	Sample Specification: float32le 1ch 25Hz
	Channel Map: mono
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
	Corked: yes
	Mute: no
	Volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	Buffer Latency: 0 usec
	Source Latency: 0 usec
	Resample method: PipeWire
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = ""
		application.id = "org.kde.plasma-pa"
		application.icon_name = ""
		application.process.id = "1501"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "plasmashell"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		media.name = "PlasmaPA-VolumeMeter"
		node.rate = "1/25"
		node.latency = "1/25"
		stream.monitor = "true"
		target.object = "211"
		stream.is-live = "true"
		node.name = ""
		node.want-driver = "true"
		node.autoconnect = "true"
		node.dont-reconnect = "true"
		media.class = "Stream/Input/Audio"
		resample.peaks = "true"
		channelmix.normalize = "true"
		port.ignore-latency = "true"
		port.group = "stream.0"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "7"
		clock.quantum-limit = "8192"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "80"
		object.id = "110"
		object.serial = "4271"
		module-stream-restore.id = "source-output-by-application-id:org.kde.plasma-pa"

Source Output #4307
	Driver: PipeWire
	Owner Module: n/a
	Client: 90
	Source: 4294967295
	Sample Specification: float32le 1ch 25Hz
	Channel Map: mono
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
	Corked: yes
	Mute: no
	Volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	Buffer Latency: 0 usec
	Source Latency: 0 usec
	Resample method: PipeWire
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = ""
		application.id = "org.kde.plasma-pa"
		application.icon_name = ""
		application.process.id = "1501"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "plasmashell"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		media.name = "PlasmaPA-VolumeMeter"
		node.rate = "1/25"
		node.latency = "1/25"
		stream.monitor = "true"
		target.object = "2090"
		stream.is-live = "true"
		node.name = ""
		node.want-driver = "true"
		node.autoconnect = "true"
		node.dont-reconnect = "true"
		media.class = "Stream/Input/Audio"
		resample.peaks = "true"
		channelmix.normalize = "true"
		port.ignore-latency = "true"
		port.group = "stream.0"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "7"
		clock.quantum-limit = "8192"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "80"
		object.id = "107"
		object.serial = "4307"
		module-stream-restore.id = "source-output-by-application-id:org.kde.plasma-pa"

Client #32
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1539"
		pipewire.sec.socket = "pipewire-0-manager"
		pipewire.sec.pid = "1539"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "32"
		object.serial = "32"
		application.name = "WirePlumber"
		application.version = "0.5.5"
		wireplumber.daemon = "true"
		wireplumber.profile = "main"
		remote.name = "[pipewire-0-manager,pipewire-0]"
		config.name = "null"
		context.modules.allow-empty = "true"
		application.process.binary = "wireplumber"
		application.language = "en_US.UTF8"
		application.process.id = "1539"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.session_id = "3"
		window.x11.display = ":1"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #33
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "33"
		object.serial = "33"
		config.name = "pipewire-pulse.conf"
		application.name = "pipewire"
		application.process.binary = "pipewire"
		application.language = "en_US.UTF8"
		application.process.id = "1540"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.session_id = "3"
		window.x11.display = ":1"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #34
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "34"
		object.serial = "34"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "libcanberra"
		application.version = "0.30"
		application.id = "org.freedesktop.libcanberra"
		application.process.id = "1479"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "kded6"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #47
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1539"
		pipewire.sec.socket = "pipewire-0-manager"
		pipewire.sec.pid = "1539"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "47"
		object.serial = "47"
		application.name = "WirePlumber [export]"
		wireplumber.export-core = "true"
		application.version = "0.5.5"
		wireplumber.daemon = "true"
		wireplumber.profile = "main"
		remote.name = "[pipewire-0-manager,pipewire-0]"
		config.name = "null"
		context.modules.allow-empty = "true"
		application.process.binary = "wireplumber"
		application.language = "en_US.UTF8"
		application.process.id = "1539"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.session_id = "3"
		window.x11.display = ":1"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #48
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "48"
		object.serial = "48"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "kded6"
		application.id = ""
		application.icon_name = ""
		application.process.id = "1479"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "kded6"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #86
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1434"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1434"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "76"
		object.serial = "86"
		pipewire.access.portal.is_portal = "true"
		portal.monitor = "Camera"
		application.name = "xdg-desktop-portal"
		application.process.binary = "xdg-desktop-portal"
		application.language = "en_US.UTF8"
		application.process.id = "1434"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.session_id = "3"
		window.x11.display = ":1"
		log.level = "0"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #87
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1501"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1501"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "77"
		object.serial = "87"
		application.name = "plasmashell"
		application.process.binary = "plasmashell"
		application.language = "en_US.UTF8"
		application.process.id = "1501"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.session_id = "3"
		window.x11.display = ":1"
		log.level = "0"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #88
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "78"
		object.serial = "88"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "libcanberra"
		application.version = "0.30"
		application.id = "org.freedesktop.libcanberra"
		application.process.id = "1501"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "plasmashell"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #89
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "79"
		object.serial = "89"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		window.x11.screen = "0"
		window.x11.display = ":1"
		application.name = "Firefox"
		application.process.id = "1736"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "firefox"
		application.language = "en_US.UTF8"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #90
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "80"
		object.serial = "90"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = ""
		application.id = "org.kde.plasma-pa"
		application.icon_name = ""
		application.process.id = "1501"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "plasmashell"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #91
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "81"
		object.serial = "91"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Firefox"
		application.process.id = "1736"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "firefox"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #221
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "45"
		object.serial = "221"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "System Settings"
		application.id = "org.kde.plasma-pa"
		application.icon_name = "preferences-system"
		application.process.id = "2663"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "systemsettings"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #241
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "105"
		object.serial = "241"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "WEBRTC VoiceEngine"
		application.process.id = "2817"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "Discord"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #242
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "108"
		object.serial = "242"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "WEBRTC VoiceEngine"
		application.process.id = "2817"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "Discord"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #243
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "118"
		object.serial = "243"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Chromium input"
		application.process.id = "2866"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "Discord"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #493
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "126"
		object.serial = "493"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.version = "129.0.2"
		application.name = "Firefox"
		application.icon_name = "firefox"
		application.process.id = "1736"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "firefox"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Client #4337
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-lexi-1540"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "1540"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "137"
		object.serial = "4337"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.process.id = "70588"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "pactl"
		application.name = "pactl"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.2.3"
		pipewire.access = "unrestricted"

Sample #0
	Name: audio-volume-change
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Duration: 0.1s
	Size: 11.5 KiB
	Lazy: no
	Filename: n/a
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "libcanberra"
		application.version = "0.30"
		application.id = "org.freedesktop.libcanberra"
		application.process.id = "1501"
		application.process.user = "lexi"
		application.process.host = "arch"
		application.process.binary = "plasmashell"
		application.language = "en_US.UTF8"
		window.x11.display = ":1"
		application.process.machine_id = "8c7e7291c79d4309b907b7a2b4d0bfb2"
		application.process.session_id = "3"
		event.id = "audio-volume-change"
		event.description = "Volume Control Feedback Sound"
		media.role = "event"
		media.name = "audio-volume-change"
		media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"

Card #49
	Name: alsa_card.pci-0000_01_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.alsa.card = "1"
		api.alsa.card.longname = "HDA NVidia at 0xa4080000 irq 17"
		api.alsa.card.name = "HDA NVidia"
		api.alsa.path = "hw:1"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:01:00.1"
		device.description = "TU104 HD Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_01_00.1"
		device.nick = "HDA NVidia"
		device.plugged.usec = "3901293"
		device.product.id = "0x10f8"
		device.product.name = "TU104 HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.vendor.id = "0x10de"
		device.vendor.name = "NVIDIA Corporation"
		media.class = "Audio/Device"
		factory.id = "15"
		client.id = "47"
		object.id = "49"
		object.serial = "49"
		object.path = "alsa:acp:NVidia"
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xa4080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Nvidia GPU 92 HDMI/DP"
		alsa.components = "HDA:10de0092,10438717,00100100"
		alsa.id = "NVidia"
		device.string = "1"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
	Active Profile: off

Card #50
	Name: alsa_card.usb-046d_Logitech_StreamCam_2BD01255-02
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.alsa.card = "2"
		api.alsa.card.longname = "Logitech StreamCam at usb-0000:00:14.0-3, high speed"
		api.alsa.card.name = "Logitech StreamCam"
		api.alsa.path = "hw:2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "usb"
		device.bus-id = "usb-046d_Logitech_StreamCam_2BD01255-02"
		device.bus_path = "pci-0000:00:14.0-usb-0:3:1.2"
		device.description = "StreamCam"
		device.enum.api = "udev"
		device.form_factor = "webcam"
		device.icon_name = "camera-web-analog-usb"
		device.name = "alsa_card.usb-046d_Logitech_StreamCam_2BD01255-02"
		device.nick = "Logitech StreamCam"
		device.plugged.usec = "4213457"
		device.product.id = "0x0893"
		device.product.name = "StreamCam"
		device.serial = "046d_Logitech_StreamCam_2BD01255"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/sound/card2"
		device.vendor.id = "0x046d"
		device.vendor.name = "Logitech, Inc."
		media.class = "Audio/Device"
		factory.id = "15"
		client.id = "47"
		object.id = "50"
		object.serial = "50"
		object.path = "alsa:acp:StreamCam"
		alsa.card = "2"
		alsa.card_name = "Logitech StreamCam"
		alsa.long_card_name = "Logitech StreamCam at usb-0000:00:14.0-3, high speed"
		alsa.driver_name = "snd_usb_audio"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB046d:0893"
		alsa.id = "StreamCam"
		device.string = "2"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		pro-audio: Pro Audio (sinks: 0, sources: 1, priority: 1, available: yes)
	Active Profile: off

Card #51
	Name: alsa_card.usb-Logitech_G935_Gaming_Headset-00
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.alsa.card = "3"
		api.alsa.card.longname = "Logitech G935 Gaming Headset at usb-0000:00:14.0-6.3, full speed"
		api.alsa.card.name = "G935 Gaming Headset"
		api.alsa.path = "hw:3"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio3"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "usb"
		device.bus-id = "usb-Logitech_G935_Gaming_Headset-00"
		device.bus_path = "pci-0000:00:14.0-usb-0:6.3:1.0"
		device.description = "G935 Gaming Headset"
		device.enum.api = "udev"
		device.form_factor = "headset"
		device.icon_name = "audio-headset-analog-usb"
		device.name = "alsa_card.usb-Logitech_G935_Gaming_Headset-00"
		device.nick = "G935 Gaming Headset"
		device.plugged.usec = "4535857"
		device.product.id = "0x0a87"
		device.product.name = "G935 Gaming Headset"
		device.serial = "Logitech_G935_Gaming_Headset"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.0/sound/card3"
		device.vendor.id = "0x046d"
		device.vendor.name = "Logitech, Inc."
		media.class = "Audio/Device"
		factory.id = "15"
		client.id = "47"
		object.id = "51"
		object.serial = "51"
		object.path = "alsa:acp:Headset"
		alsa.card = "3"
		alsa.card_name = "G935 Gaming Headset"
		alsa.long_card_name = "Logitech G935 Gaming Headset at usb-0000:00:14.0-6.3, full speed"
		alsa.driver_name = "snd_usb_audio"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB046d:0a87"
		alsa.id = "Headset"
		device.string = "3"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
	Active Profile: pro-audio

Card #52
	Name: alsa_card.pci-0000_00_1f.3
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HDA Intel PCH at 0xa4410000 irq 146"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "hw:0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3"
		device.description = "Built-in Audio"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1f.3"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "3935746"
		device.product.id = "0xa348"
		device.product.name = "Cannon Lake PCH cAVS"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		media.class = "Audio/Device"
		factory.id = "15"
		client.id = "47"
		object.id = "52"
		object.serial = "52"
		object.path = "alsa:acp:PCH"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa4410000 irq 146"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Realtek ALC887-VD"
		alsa.components = "HDA:10ec0887,10432360,00100302"
		alsa.id = "PCH"
		device.string = "0"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		pro-audio: Pro Audio (sinks: 1, sources: 2, priority: 1, available: yes)
	Active Profile: pro-audio

Arch Linux

#1 2024-08-29 07:05:58

Timeshift broke Grub

#2 2024-08-29 16:44:48

Re: Timeshift broke Grub

#3 2024-08-29 21:30:36

Re: Timeshift broke Grub

#4 2024-08-29 22:04:56

Re: Timeshift broke Grub

#5 2024-08-30 19:09:26

Re: Timeshift broke Grub

Board footer