You are not logged in.

Pages: 1

#1 2007-02-15 09:50:27

Crooksey
Member
From: UK ~
Registered: 2006-08-14
Posts: 415
Website

Beryl issues

[crooksey@thinkpad ~]$ beryl-manager
[crooksey@thinkpad ~]$ libGL warning: 3D driver claims to not support visual 0x5b
do_wait: drmWaitVBlank returned -1, IRQs don't seem to be working correctly.
Try running with LIBGL_THROTTLE_REFRESH and LIBL_SYNC_REFRESH unset.
[crooksey@thinkpad ~]$ cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        FontPath        "/usr/share/X11/fonts/misc"
        FontPath        "/usr/share/X11/fonts/cyrillic"
        FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/Type1"
        FontPath        "/usr/share/X11/fonts/100dpi"
        FontPath        "/usr/share/X11/fonts/75dpi"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load    "i2c"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "dbe"
        Load    "int10"
        Load    "type1"
        Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Keyboard 1"
        Driver          "kbd"
        Option "XkbModel"       "pc104"
        Option "XkbLayout"      "gb"
EndSection


Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ExplorerPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option          "HorizScrollDelta"      "0"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "GK1"
        Driver          "i810"
        Option          "VBERestore"            "true"
        BusID           "PCI:0:2:0"
        Option          "MonitorLayout"         "CRT,LFP"
        Screen          0
        Option "XAANoOffscreenPixmaps" "true" 
        Option "DRI" "true"
EndSection



Section "Monitor"
        Identifier      "MonitorLaptop"
        Option          "DPMS"
EndSection


Section "Screen"
        Identifier      "ScreenLaptop"
        Device          "GK1"
        Monitor         "MonitorLaptop"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1024x768"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1024x768"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1024x768"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1024x768"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1024x768"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1024x768"
        EndSubSection
EndSection



Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          0 "ScreenLaptop"
        InputDevice     "Keyboard 1"
        InputDevice     "Configured Mouse"
        InputDevice     "stylus" "SendCoreEvents"
        InputDevice     "cursor" "SendCoreEvents"
        InputDevice     "eraser" "SendCoreEvents"
        InputDevice     "Synaptics Touchpad"
        Option "AIGLX" "true"
EndSection

Section "DRI"
        Mode    0666
EndSection

Section "Extensions" 
    Option "Composite" "Enable"
EndSection

So, anything I am missing, just wondering why its not running, my beryl packages came from pacman,

[crooksey@thinkpad ~]$ glxinfo | grep direct
libGL warning: 3D driver claims to not support visual 0x5b
do_wait: drmWaitVBlank returned -1, IRQs don't seem to be working correctly.
Try running with LIBGL_THROTTLE_REFRESH and LIBL_SYNC_REFRESH unset.
direct rendering: Yes

Last edited by Crooksey (2007-02-15 09:51:32)

Arch Linux since 2006
Python Web Developer + Sys Admin (Gentoo/BSD)

Offline

#2 2007-02-15 18:02:54

xabbott
Member
From: orlando, fl
Registered: 2007-01-11
Posts: 56
Website

Re: Beryl issues

Crooksey wrote:
#   sudo dpkg-reconfigure -phigh xserver-xorg

run sudo dpkg-reconfigure -phigh xserver-xorg imo

Last edited by xabbott (2007-02-15 18:04:39)

Offline

#3 2007-02-16 12:21:36

Crooksey
Member
From: UK ~
Registered: 2006-08-14
Posts: 415
Website

Re: Beryl issues

Thats a Debian command right?

I copied the working xorg.conf for my Thinkpad from a Ubuntu user.

Arch Linux since 2006
Python Web Developer + Sys Admin (Gentoo/BSD)

Offline

#4 2007-02-16 17:55:02

hacosta
Member
From: Mexico
Registered: 2006-10-22
Posts: 423

Re: Beryl issues

if you copied the xorg.conf you need to update the font and module paths to match archlinux

Offline

Pages: 1

Board footer

Powered by FluxBB